X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/36c22a772038342cb7224a3d6e0ae4acd3434284..adde7768a2eab2950a7628319ec832c63a00ff03:/target/linux/rb532/files/arch/mips/rb500/devices.c

diff --git a/target/linux/rb532/files/arch/mips/rb500/devices.c b/target/linux/rb532/files/arch/mips/rb500/devices.c
index 1ca808bea..6372737de 100644
--- a/target/linux/rb532/files/arch/mips/rb500/devices.c
+++ b/target/linux/rb532/files/arch/mips/rb500/devices.c
@@ -22,6 +22,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
 
 #include <asm/rc32434/rc32434.h>
 #include <asm/rc32434/dma.h>
@@ -126,6 +130,19 @@ static struct platform_device cf_slot0 = {
 };
 
 /* Resources and device for NAND.  There is no data needed and no irqs, so just define the memory used. */
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.  So set the oobinfo
+ * when creating the partitions
+ */
+static struct nand_ecclayout rb500_nand_ecclayout = {
+	.eccbytes	= 6,
+	.eccpos		= { 8, 9, 10, 13, 14, 15 },
+	.oobavail	= 9,
+	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
 int rb500_dev_ready(struct mtd_info *mtd)
 {
         return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
@@ -182,11 +199,39 @@ static struct mtd_partition rb500_partition_info[] = {
 	}
 };
 
+static struct platform_device rb500_led = {
+	.name = "rb500-led",
+	.id = 0,
+};
+
+static struct gpio_keys_button rb500_gpio_btn[] = {
+	{
+		.gpio = 1,
+		.code = BTN_0,
+		.desc = "S1",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rb500_gpio_btn_data = {
+	.buttons = rb500_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rb500_gpio_btn),
+};
+
+static struct platform_device rb500_button = {
+	.name 	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rb500_gpio_btn_data,
+	}
+};
 
 static struct platform_device *rb500_devs[] = {
 	&korina_dev0,
 	&nand_slot0,
-	&cf_slot0
+	&cf_slot0,
+	&rb500_led,
+	&rb500_button
 };
 
 static void __init parse_mac_addr(char *macstr)
@@ -228,12 +273,26 @@ static void __init parse_mac_addr(char *macstr)
 /* NAND definitions */
 #define NAND_CHIP_DELAY	25
 
+static int rb500_nand_fixup(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (mtd->writesize == 512)
+		chip->ecc.layout = &rb500_nand_ecclayout;
+
+	return 0;
+}
+
 static void __init rb500_nand_setup(void)
 {
-	if (!strcmp(board_type, "500r5"))
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
 		changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
-        else
+		break;
+	default:
 		changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
+		break;
+	}
 
 	/* Setup NAND specific settings */
 	rb500_nand_data.chip.nr_chips = 1;
@@ -241,6 +300,8 @@ static void __init rb500_nand_setup(void)
 	rb500_nand_data.chip.partitions = rb500_partition_info;
 	rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
 	rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
+
+	rb500_nand_data.chip.chip_fixup = &rb500_nand_fixup;
 }
 
 
@@ -258,7 +319,7 @@ static int __init plat_setup_devices(void)
 	/* Read the NAND resources from the device controller */
 	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
 	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
-	
+
 	/* Initialise the NAND device */
 	rb500_nand_setup();