X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/584258d442d423627b075574d102427de35ce6b9..99b14991d61b0bda219168d5893961621b09ac35:/target/linux/brcm-2.4/patches/001-bcm47xx.patch diff --git a/target/linux/brcm-2.4/patches/001-bcm47xx.patch b/target/linux/brcm-2.4/patches/001-bcm47xx.patch index 2e64b0fc3..9c954fa92 100644 --- a/target/linux/brcm-2.4/patches/001-bcm47xx.patch +++ b/target/linux/brcm-2.4/patches/001-bcm47xx.patch @@ -1,1207 +1,1479 @@ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/cfe_env.c linux-2.4.32-brcm/arch/mips/bcm947xx/cfe_env.c ---- linux-2.4.32/arch/mips/bcm947xx/cfe_env.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/cfe_env.c 2005-12-19 01:56:35.104829500 +0100 -@@ -0,0 +1,234 @@ +diff -urN linux.old/arch/mips/bcm947xx/bcmsrom.c linux.dev/arch/mips/bcm947xx/bcmsrom.c +--- linux.old/arch/mips/bcm947xx/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/bcmsrom.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,1213 @@ +/* -+ * NVRAM variable manipulation (Linux kernel half) ++ * Misc useful routines to access NIC SROM/OTP . + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * $Id: bcmsrom.c,v 1.1.1.14 2006/04/15 01:28:25 michael Exp $ + */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ +#include ++#include +#include -+#include +#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+#define NVRAM_SIZE (0x1ff0) -+static char _nvdata[NVRAM_SIZE] __initdata; -+static char _valuestr[256] __initdata; -+ -+/* -+ * TLV types. These codes are used in the "type-length-value" -+ * encoding of the items stored in the NVRAM device (flash or EEPROM) -+ * -+ * The layout of the flash/nvram is as follows: -+ * -+ * -+ * -+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. -+ * The "length" field marks the length of the data section, not -+ * including the type and length fields. -+ * -+ * Environment variables are stored as follows: -+ * -+ * = -+ * -+ * If bit 0 (low bit) is set, the length is an 8-bit value. -+ * If bit 0 (low bit) is clear, the length is a 16-bit value -+ * -+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still -+ * indicates the size of the length field. -+ * -+ * Flags are from the constants below: -+ * -+ */ -+#define ENV_LENGTH_16BITS 0x00 /* for low bit */ -+#define ENV_LENGTH_8BITS 0x01 ++/* debug/trace */ ++#if defined(WLTEST) ++#define BS_ERROR(args) printf args ++#else ++#define BS_ERROR(args) ++#endif /* BCMDBG_ERR || WLTEST */ + -+#define ENV_TYPE_USER 0x80 ++#define VARS_MAX 4096 /* should be reduced */ + -+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) -+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) ++#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */ ++#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */ + -+/* -+ * The actual TLV types we support -+ */ ++static int initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count); ++static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count); ++static int initvars_flash_sb(void *sbh, char **vars, uint *count); ++static int srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count); ++static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd); ++static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data); ++static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data); ++static int sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, ++ bool check_crc); + -+#define ENV_TLV_TYPE_END 0x00 -+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) ++static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count); ++static int initvars_flash(osl_t *osh, char **vp, uint len, char *devpath); + +/* -+ * Environment variable flags ++ * Initialize local vars from the right source for this platform. ++ * Return 0 on success, nonzero on error. + */ ++int ++srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, uint *count) ++{ ++ ASSERT(bustype == BUSTYPE(bustype)); ++ if (vars == NULL || count == NULL) ++ return (0); + -+#define ENV_FLG_NORMAL 0x00 /* normal read/write */ -+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ -+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ ++ switch (BUSTYPE(bustype)) { ++ case SB_BUS: ++ case JTAG_BUS: ++ return initvars_flash_sb(sbh, vars, count); + -+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ -+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ ++ case PCI_BUS: ++ ASSERT(curmap); /* can not be NULL */ ++ return initvars_srom_pci(sbh, curmap, vars, count); + ++ case PCMCIA_BUS: ++ return initvars_cis_pcmcia(sbh, osh, vars, count); + -+/* ********************************************************************* -+ * _nvram_read(buffer,offset,length) -+ * -+ * Read data from the NVRAM device -+ * -+ * Input parameters: -+ * buffer - destination buffer -+ * offset - offset of data to read -+ * length - number of bytes to read -+ * -+ * Return value: -+ * number of bytes read, or <0 if error occured -+ ********************************************************************* */ -+static int -+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) -+{ -+ int i; -+ if (offset > NVRAM_SIZE) -+ return -1; + -+ for ( i = 0; i < length; i++) { -+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; -+ } -+ return length; ++ default: ++ ASSERT(0); ++ } ++ return (-1); +} + -+ -+static char* -+_strnchr(const char *dest,int c,size_t cnt) ++/* support only 16-bit word read from srom */ ++int ++srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) +{ -+ while (*dest && (cnt > 0)) { -+ if (*dest == c) return (char *) dest; -+ dest++; -+ cnt--; -+ } -+ return NULL; -+} ++ void *srom; ++ uint i, off, nw; + ++ ASSERT(bustype == BUSTYPE(bustype)); + ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; + -+/* -+ * Core support API: Externally visible. -+ */ ++ off = byteoff / 2; ++ nw = nbytes / 2; + -+/* -+ * Get the value of an NVRAM variable -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined -+ */ ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ if (!curmap) ++ return 1; ++ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET; ++ if (sprom_read_pci(osh, srom, off, buf, nw, FALSE)) ++ return 1; ++ } else if (BUSTYPE(bustype) == PCMCIA_BUS) { ++ for (i = 0; i < nw; i++) { ++ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) ++ return 1; ++ } ++ } else { ++ return 1; ++ } + -+char* -+cfe_env_get(unsigned char *nv_buf, char* name) ++ return 0; ++} ++ ++/* support only 16-bit word write into srom */ ++int ++srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) +{ -+ int size; -+ unsigned char *buffer; -+ unsigned char *ptr; -+ unsigned char *envval; -+ unsigned int reclen; -+ unsigned int rectype; -+ int offset; -+ int flg; -+ -+ size = NVRAM_SIZE; -+ buffer = &_nvdata[0]; ++ uint16 *srom; ++ uint i, nw, crc_range; ++ uint16 image[SPROM_SIZE]; ++ uint8 crc; ++ volatile uint32 val32; + -+ ptr = buffer; -+ offset = 0; ++ ASSERT(bustype == BUSTYPE(bustype)); + -+ /* Read the record type and length */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ -+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; + -+ /* Adjust pointer for TLV type */ -+ rectype = *(ptr); -+ offset++; -+ size--; ++ /* Are we writing the whole thing at once? */ ++ if ((byteoff == 0) && ++ ((nbytes == SPROM_SIZE) || ++ (nbytes == (SPROM_CRC_RANGE * 2)) || ++ (nbytes == (SROM4_WORDS * 2)))) { ++ crc_range = nbytes; ++ bcopy((void*)buf, (void*)image, nbytes); ++ nw = nbytes / 2; ++ } else { ++ if ((BUSTYPE(bustype) == PCMCIA_BUS) || (BUSTYPE(bustype) == SDIO_BUS)) ++ crc_range = SPROM_SIZE; ++ else ++ crc_range = SPROM_CRC_RANGE * 2; /* Tentative */ + -+ /* -+ * Read the length. It can be either 1 or 2 bytes -+ * depending on the code -+ */ -+ if (rectype & ENV_LENGTH_8BITS) { -+ /* Read the record type and length - 8 bits */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ reclen = *(ptr); -+ size--; -+ offset++; -+ } -+ else { -+ /* Read the record type and length - 16 bits, MSB first */ -+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { -+ goto error; -+ } -+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); -+ size -= 2; -+ offset += 2; ++ nw = crc_range / 2; ++ /* read first 64 words from srom */ ++ if (srom_read(bustype, curmap, osh, 0, crc_range, image)) ++ return 1; ++ if (image[SROM4_SIGN] == SROM4_SIGNATURE) { ++ crc_range = SROM4_WORDS; ++ nw = crc_range / 2; ++ if (srom_read(bustype, curmap, osh, 0, crc_range, image)) ++ return 1; ++ } ++ /* make changes */ ++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); + } + -+ if (reclen > size) -+ break; /* should not happen, bad NVRAM */ ++ /* calculate crc */ ++ htol16_buf(image, crc_range); ++ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); ++ ltoh16_buf(image, crc_range); ++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); + -+ switch (rectype) { -+ case ENV_TLV_TYPE_ENV: -+ /* Read the TLV data */ -+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) -+ goto error; -+ flg = *ptr++; -+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); -+ if (envval) { -+ *envval++ = '\0'; -+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); -+ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; -+#if 0 -+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); -+#endif -+ if(!strcmp(ptr, name)){ -+ return _valuestr; -+ } -+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) -+ return _valuestr; -+ } -+ break; -+ -+ default: -+ /* Unknown TLV type, skip it. */ -+ break; -+ } -+ -+ /* -+ * Advance to next TLV -+ */ -+ -+ size -= (int)reclen; -+ offset += reclen; -+ -+ /* Read the next record type */ -+ ptr = buffer; -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) -+ goto error; ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET); ++ /* enable writes to the SPROM */ ++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); ++ val32 |= SPROM_WRITEEN; ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ /* write srom */ ++ for (i = 0; i < nw; i++) { ++ W_REG(osh, &srom[i], image[i]); ++ bcm_mdelay(WRITE_WORD_DELAY); ++ } ++ /* disable writes to the SPROM */ ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ++ ~SPROM_WRITEEN); ++ } else if (BUSTYPE(bustype) == PCMCIA_BUS) { ++ /* enable writes to the SPROM */ ++ if (sprom_cmd_pcmcia(osh, SROM_WEN)) ++ return 1; ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ /* write srom */ ++ for (i = 0; i < nw; i++) { ++ sprom_write_pcmcia(osh, (uint16)(i), image[i]); ++ bcm_mdelay(WRITE_WORD_DELAY); ++ } ++ /* disable writes to the SPROM */ ++ if (sprom_cmd_pcmcia(osh, SROM_WDS)) ++ return 1; ++ } else { ++ return 1; + } + -+error: -+ return NULL; -+ ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ return 0; +} + -diff -Nur linux-2.4.32/arch/mips/bcm947xx/compressed/Makefile linux-2.4.32-brcm/arch/mips/bcm947xx/compressed/Makefile ---- linux-2.4.32/arch/mips/bcm947xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/compressed/Makefile 2005-12-16 23:39:10.668819500 +0100 -@@ -0,0 +1,33 @@ -+# -+# Makefile for Broadcom BCM947XX boards -+# -+# Copyright 2001-2003, Broadcom Corporation -+# All Rights Reserved. -+# -+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+# -+# $Id: Makefile,v 1.2 2005/04/02 12:12:57 wbx Exp $ -+# + -+OBJCOPY_ARGS = -O binary -R .reginfo -R .note -R .comment -R .mdebug -S -+SYSTEM ?= $(TOPDIR)/vmlinux ++static int ++srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt, char **vars, uint *count) ++{ ++ char eabuf[32]; ++ char *vp, *base; ++ uint8 *cis, tup, tlen, sromrev = 1; ++ int i, j; ++ uint varsize; ++ bool ag_init = FALSE; ++ uint32 w32; + -+all: vmlinuz ++ ASSERT(vars); ++ ASSERT(count); + -+# Don't build dependencies, this may die if $(CC) isn't gcc -+dep: ++ base = vp = MALLOC(osh, VARS_MAX); ++ ASSERT(vp); ++ if (!vp) ++ return -2; + -+# Create a gzipped version named vmlinuz for compatibility -+vmlinuz: piggy -+ gzip -c9 $< > $@ ++ while (ciscnt--) { ++ cis = *pcis++; ++ i = 0; ++ do { ++ tup = cis[i++]; ++ tlen = cis[i++]; ++ if ((i + tlen) >= CIS_SIZE) ++ break; + -+piggy: $(SYSTEM) -+ $(OBJCOPY) $(OBJCOPY_ARGS) $< $@ ++ switch (tup) { ++ case CISTPL_MANFID: ++ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); ++ vp++; ++ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); ++ vp++; ++ break; + -+mrproper: clean ++ case CISTPL_FUNCE: ++ switch (cis[i]) { ++ case LAN_NID: ++ ASSERT(cis[i + 1] == 6); ++ bcm_ether_ntoa((struct ether_addr *)&cis[i + 2], eabuf); ++ vp += sprintf(vp, "il0macaddr=%s", eabuf); ++ vp++; ++ break; ++ case 1: /* SDIO Extended Data */ ++ vp += sprintf(vp, "sdmaxblk=%d", ++ (cis[i + 13] << 8) | cis[i + 12]); ++ vp++; ++ break; ++ } ++ break; + -+clean: -+ rm -f vmlinuz piggy -diff -Nur linux-2.4.32/arch/mips/bcm947xx/generic/int-handler.S linux-2.4.32-brcm/arch/mips/bcm947xx/generic/int-handler.S ---- linux-2.4.32/arch/mips/bcm947xx/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/generic/int-handler.S 2005-12-16 23:39:10.668819500 +0100 -@@ -0,0 +1,51 @@ -+/* -+ * Generic interrupt handler for Broadcom MIPS boards -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: int-handler.S,v 1.1 2005/03/16 13:50:00 wbx Exp $ -+ */ ++ case CISTPL_CFTABLE: ++ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); ++ vp++; ++ break; + -+#include ++ case CISTPL_BRCM_HNBU: ++ switch (cis[i]) { ++ case HNBU_SROMREV: ++ sromrev = cis[i + 1]; ++ break; + -+#include -+#include -+#include -+#include ++ case HNBU_CHIPID: ++ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + ++ cis[i + 1]); ++ vp++; ++ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + ++ cis[i + 3]); ++ vp++; ++ if (tlen == 7) { ++ vp += sprintf(vp, "chiprev=%d", ++ (cis[i + 6] << 8) + cis[i + 5]); ++ vp++; ++ } ++ break; + -+/* -+ * MIPS IRQ Source -+ * -------- ------ -+ * 0 Software (ignored) -+ * 1 Software (ignored) -+ * 2 Combined hardware interrupt (hw0) -+ * 3 Hardware -+ * 4 Hardware -+ * 5 Hardware -+ * 6 Hardware -+ * 7 R4k timer -+ */ ++ case HNBU_BOARDREV: ++ vp += sprintf(vp, "boardrev=%d", cis[i + 1]); ++ vp++; ++ break; + -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ NESTED(brcmIRQ, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set at -+ .set noreorder ++ case HNBU_AA: ++ vp += sprintf(vp, "aa2g=%d", cis[i + 1]); ++ vp++; ++ break; + -+ jal brcm_irq_dispatch -+ move a0, sp ++ case HNBU_AG: ++ vp += sprintf(vp, "ag0=%d", cis[i + 1]); ++ vp++; ++ ag_init = TRUE; ++ break; + -+ j ret_from_irq -+ nop -+ -+ END(brcmIRQ) -diff -Nur linux-2.4.32/arch/mips/bcm947xx/generic/irq.c linux-2.4.32-brcm/arch/mips/bcm947xx/generic/irq.c ---- linux-2.4.32/arch/mips/bcm947xx/generic/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/generic/irq.c 2005-12-16 23:39:10.668819500 +0100 -@@ -0,0 +1,130 @@ -+/* -+ * Generic interrupt control functions for Broadcom MIPS boards -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: irq.c,v 1.1 2005/03/16 13:50:00 wbx Exp $ -+ */ ++ case HNBU_CC: ++ ASSERT(sromrev == 1); ++ vp += sprintf(vp, "cc=%d", cis[i + 1]); ++ vp++; ++ break; + -+#include -+#include -+#include -+#include -+#include -+#include ++ case HNBU_PAPARMS: ++ if (tlen == 2) { ++ ASSERT(sromrev == 1); ++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]); ++ vp++; ++ } else if (tlen >= 9) { ++ if (tlen == 10) { ++ ASSERT(sromrev == 2); ++ vp += sprintf(vp, "opo=%d", cis[i + 9]); ++ vp++; ++ } else ++ ASSERT(tlen == 9); ++ ++ for (j = 0; j < 3; j++) { ++ vp += sprintf(vp, "pa0b%d=%d", j, ++ (cis[i + (j * 2) + 2] << 8) + ++ cis[i + (j * 2) + 1]); ++ vp++; ++ } ++ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); ++ vp++; ++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]); ++ vp++; ++ } else ++ ASSERT(tlen >= 9); ++ break; + -+#include -+#include -+#include ++ case HNBU_OEM: ++ ASSERT(sromrev == 1); ++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", ++ cis[i + 1], cis[i + 2], ++ cis[i + 3], cis[i + 4], ++ cis[i + 5], cis[i + 6], ++ cis[i + 7], cis[i + 8]); ++ vp++; ++ break; + -+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) ++ case HNBU_BOARDFLAGS: ++ w32 = (cis[i + 2] << 8) + cis[i + 1]; ++ if (tlen == 5) ++ w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16); ++ vp += sprintf(vp, "boardflags=0x%x", w32); ++ vp++; ++ break; + -+extern asmlinkage void brcmIRQ(void); -+extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs); ++ case HNBU_LEDS: ++ if (cis[i + 1] != 0xff) { ++ vp += sprintf(vp, "ledbh0=%d", cis[i + 1]); ++ vp++; ++ } ++ if (cis[i + 2] != 0xff) { ++ vp += sprintf(vp, "ledbh1=%d", cis[i + 2]); ++ vp++; ++ } ++ if (cis[i + 3] != 0xff) { ++ vp += sprintf(vp, "ledbh2=%d", cis[i + 3]); ++ vp++; ++ } ++ if (cis[i + 4] != 0xff) { ++ vp += sprintf(vp, "ledbh3=%d", cis[i + 4]); ++ vp++; ++ } ++ break; + -+void -+brcm_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; ++ case HNBU_CCODE: ++ { ++ char str[3]; ++ ASSERT(sromrev > 1); ++ str[0] = cis[i + 1]; ++ str[1] = cis[i + 2]; ++ str[2] = 0; ++ vp += sprintf(vp, "ccode=%s", str); ++ vp++; ++ vp += sprintf(vp, "cctl=0x%x", cis[i + 3]); ++ vp++; ++ break; ++ } + -+ cause = read_c0_cause() & -+ read_c0_status() & -+ CAUSEF_IP; ++ case HNBU_CCKPO: ++ ASSERT(sromrev > 2); ++ vp += sprintf(vp, "cckpo=0x%x", ++ (cis[i + 2] << 8) | cis[i + 1]); ++ vp++; ++ break; + -+#ifdef CONFIG_KERNPROF -+ change_c0_status(cause | 1, 1); -+#else -+ clear_c0_status(cause); -+#endif ++ case HNBU_OFDMPO: ++ ASSERT(sromrev > 2); ++ vp += sprintf(vp, "ofdmpo=0x%x", ++ (cis[i + 4] << 24) | ++ (cis[i + 3] << 16) | ++ (cis[i + 2] << 8) | ++ cis[i + 1]); ++ vp++; ++ break; ++ } ++ break; + -+ if (cause & CAUSEF_IP7) -+ do_IRQ(7, regs); -+ if (cause & CAUSEF_IP2) -+ do_IRQ(2, regs); -+ if (cause & CAUSEF_IP3) -+ do_IRQ(3, regs); -+ if (cause & CAUSEF_IP4) -+ do_IRQ(4, regs); -+ if (cause & CAUSEF_IP5) -+ do_IRQ(5, regs); -+ if (cause & CAUSEF_IP6) -+ do_IRQ(6, regs); -+} ++ } ++ i += tlen; ++ } while (tup != 0xff); ++ } + -+static void -+enable_brcm_irq(unsigned int irq) -+{ -+ if (irq < 8) -+ set_c0_status(1 << (irq + 8)); -+ else -+ set_c0_status(IE_IRQ0); -+} ++ /* Set the srom version */ ++ vp += sprintf(vp, "sromrev=%d", sromrev); ++ vp++; + -+static void -+disable_brcm_irq(unsigned int irq) -+{ -+ if (irq < 8) -+ clear_c0_status(1 << (irq + 8)); -+ else -+ clear_c0_status(IE_IRQ0); -+} ++ /* if there is no antenna gain field, set default */ ++ if (ag_init == FALSE) { ++ ASSERT(sromrev == 1); ++ vp += sprintf(vp, "ag0=%d", 0xff); ++ vp++; ++ } + -+static void -+ack_brcm_irq(unsigned int irq) -+{ -+ /* Already done in brcm_irq_dispatch */ -+} ++ /* final nullbyte terminator */ ++ *vp++ = '\0'; ++ varsize = (uint)(vp - base); + -+static unsigned int -+startup_brcm_irq(unsigned int irq) -+{ -+ enable_brcm_irq(irq); ++ ASSERT((vp - base) < VARS_MAX); + -+ return 0; /* never anything pending */ -+} ++ if (varsize == VARS_MAX) { ++ *vars = base; ++ } else { ++ vp = MALLOC(osh, varsize); ++ ASSERT(vp); ++ if (vp) ++ bcopy(base, vp, varsize); ++ MFREE(osh, base, VARS_MAX); ++ *vars = vp; ++ if (!vp) { ++ *count = 0; ++ return -2; ++ } ++ } ++ *count = varsize; + -+static void -+end_brcm_irq(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -+ enable_brcm_irq(irq); ++ return (0); +} + -+static struct hw_interrupt_type brcm_irq_type = { -+ typename: "MIPS", -+ startup: startup_brcm_irq, -+ shutdown: disable_brcm_irq, -+ enable: enable_brcm_irq, -+ disable: disable_brcm_irq, -+ ack: ack_brcm_irq, -+ end: end_brcm_irq, -+ NULL -+}; + -+void __init -+init_IRQ(void) ++/* set PCMCIA sprom command register */ ++static int ++sprom_cmd_pcmcia(osl_t *osh, uint8 cmd) +{ -+ int i; ++ uint8 status = 0; ++ uint wait_cnt = 1000; + -+ for (i = 0; i < NR_IRQS; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = 0; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &brcm_irq_type; -+ } ++ /* write sprom command register */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); + -+ set_except_vector(0, brcmIRQ); -+ change_c0_status(ST0_IM, ALLINTS); ++ /* wait status */ ++ while (wait_cnt--) { ++ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); ++ if (status & SROM_DONE) ++ return 0; ++ } + -+#ifdef CONFIG_REMOTE_DEBUG -+ printk("Breaking into debugger...\n"); -+ set_debug_traps(); -+ breakpoint(); -+#endif ++ return 1; +} -diff -Nur linux-2.4.32/arch/mips/bcm947xx/generic/Makefile linux-2.4.32-brcm/arch/mips/bcm947xx/generic/Makefile ---- linux-2.4.32/arch/mips/bcm947xx/generic/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/generic/Makefile 2005-12-16 23:39:10.668819500 +0100 -@@ -0,0 +1,15 @@ -+# -+# Makefile for the BCM947xx specific kernel interface routines -+# under Linux. -+# + -+.S.s: -+ $(CPP) $(AFLAGS) $< -o $*.s -+.S.o: -+ $(CC) $(AFLAGS) -c $< -o $*.o -+ -+O_TARGET := brcm.o -+ -+obj-y := int-handler.o irq.o -+ -+include $(TOPDIR)/Rules.make -diff -Nur linux-2.4.32/arch/mips/bcm947xx/gpio.c linux-2.4.32-brcm/arch/mips/bcm947xx/gpio.c ---- linux-2.4.32/arch/mips/bcm947xx/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/gpio.c 2005-12-16 23:39:10.668819500 +0100 -@@ -0,0 +1,158 @@ -+/* -+ * GPIO char driver -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++/* read a word from the PCMCIA srom */ ++static int ++sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data) ++{ ++ uint8 addr_l, addr_h, data_l, data_h; + -+#include -+#include -+#include -+#include -+#include ++ addr_l = (uint8)((addr * 2) & 0xff); ++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); + -+#include -+#include -+#include -+#include ++ /* set address */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); + -+static sb_t *gpio_sbh; -+static int gpio_major; -+static devfs_handle_t gpio_dir; -+static struct { -+ char *name; -+ devfs_handle_t handle; -+} gpio_file[] = { -+ { "in", NULL }, -+ { "out", NULL }, -+ { "outen", NULL }, -+ { "control", NULL } -+}; ++ /* do read */ ++ if (sprom_cmd_pcmcia(osh, SROM_READ)) ++ return 1; + -+static int -+gpio_open(struct inode *inode, struct file * file) -+{ -+ if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file)) -+ return -ENODEV; ++ /* read data */ ++ data_h = data_l = 0; ++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); ++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); + -+ MOD_INC_USE_COUNT; ++ *data = (data_h << 8) | data_l; + return 0; +} + ++/* write a word to the PCMCIA srom */ +static int -+gpio_release(struct inode *inode, struct file * file) ++sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data) +{ -+ MOD_DEC_USE_COUNT; -+ return 0; -+} ++ uint8 addr_l, addr_h, data_l, data_h; + -+static ssize_t -+gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos) -+{ -+ u32 val; ++ addr_l = (uint8)((addr * 2) & 0xff); ++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); ++ data_l = (uint8)(data & 0xff); ++ data_h = (uint8)((data >> 8) & 0xff); + -+ switch (MINOR(file->f_dentry->d_inode->i_rdev)) { -+ case 0: -+ val = sb_gpioin(gpio_sbh); -+ break; -+ case 1: -+ val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); -+ break; -+ case 2: -+ val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); -+ break; -+ case 3: -+ val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); -+ break; -+ default: -+ return -ENODEV; -+ } ++ /* set address */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); + -+ if (put_user(val, (u32 *) buf)) -+ return -EFAULT; ++ /* write data */ ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); ++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); + -+ return sizeof(val); ++ /* do write */ ++ return sprom_cmd_pcmcia(osh, SROM_WRITE); +} + -+static ssize_t -+gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos) ++/* ++ * Read in and validate sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++sprom_read_pci(osl_t *osh, uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc) +{ -+ u32 val; ++ int err = 0; ++ uint i; + -+ if (get_user(val, (u32 *) buf)) -+ return -EFAULT; ++ /* read the sprom */ ++ for (i = 0; i < nwords; i++) ++ buf[i] = R_REG(osh, &sprom[wordoff + i]); + -+ switch (MINOR(file->f_dentry->d_inode->i_rdev)) { -+ case 0: -+ return -EACCES; -+ case 1: -+ sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); -+ break; -+ case 2: -+ sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); -+ break; -+ case 3: -+ sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); -+ break; -+ default: -+ return -ENODEV; ++ if (check_crc) { ++ /* fixup the endianness so crc8 will pass */ ++ htol16_buf(buf, nwords * 2); ++ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) ++ err = 1; ++ /* now correct the endianness of the byte array */ ++ ltoh16_buf(buf, nwords * 2); + } + -+ return sizeof(val); ++ return err; +} + -+static struct file_operations gpio_fops = { -+ owner: THIS_MODULE, -+ open: gpio_open, -+ release: gpio_release, -+ read: gpio_read, -+ write: gpio_write, -+}; -+ -+static int __init -+gpio_init(void) ++/* ++* Create variable table from memory. ++* Return 0 on success, nonzero on error. ++*/ ++static int ++initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count) +{ -+ int i; -+ -+ if (!(gpio_sbh = sb_kattach())) -+ return -ENODEV; -+ -+ sb_gpiosetcore(gpio_sbh); ++ int c = (int)(end - start); + -+ if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0) -+ return gpio_major; -+ -+ gpio_dir = devfs_mk_dir(NULL, "gpio", NULL); -+ -+ for (i = 0; i < ARRAYSIZE(gpio_file); i++) { -+ gpio_file[i].handle = devfs_register(gpio_dir, -+ gpio_file[i].name, -+ DEVFS_FL_DEFAULT, gpio_major, i, -+ S_IFCHR | S_IRUGO | S_IWUGO, -+ &gpio_fops, NULL); ++ /* do it only when there is more than just the null string */ ++ if (c > 1) { ++ char *vp = MALLOC(osh, c); ++ ASSERT(vp); ++ if (!vp) ++ return BCME_NOMEM; ++ bcopy(start, vp, c); ++ *vars = vp; ++ *count = c; ++ } ++ else { ++ *vars = NULL; ++ *count = 0; + } + + return 0; +} + -+static void __exit -+gpio_exit(void) ++/* ++ * Find variables with from flash. 'base' points to the beginning ++ * of the table upon enter and to the end of the table upon exit when success. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++initvars_flash(osl_t *osh, char **base, uint len, char *devpath) +{ -+ int i; ++ char *vp = *base; ++ char *flash; ++ int err; ++ char *s; ++ uint l, dl, copy_len; + -+ for (i = 0; i < ARRAYSIZE(gpio_file); i++) -+ devfs_unregister(gpio_file[i].handle); -+ devfs_unregister(gpio_dir); -+ devfs_unregister_chrdev(gpio_major, "gpio"); -+ sb_detach(gpio_sbh); ++ /* allocate memory and read in flash */ ++ if (!(flash = MALLOC(osh, NVRAM_SPACE))) ++ return BCME_NOMEM; ++ if ((err = nvram_getall(flash, NVRAM_SPACE))) ++ goto exit; ++ ++ /* grab vars with the prefix in name */ ++ dl = strlen(devpath); ++ for (s = flash; s && *s; s += l + 1) { ++ l = strlen(s); ++ ++ /* skip non-matching variable */ ++ if (strncmp(s, devpath, dl)) ++ continue; ++ ++ /* is there enough room to copy? */ ++ copy_len = l - dl + 1; ++ if (len < copy_len) { ++ err = BCME_BUFTOOSHORT; ++ goto exit; ++ } ++ ++ /* no prefix, just the name=value */ ++ strcpy(vp, &s[dl]); ++ vp += copy_len; ++ len -= copy_len; ++ } ++ ++ /* add null string as terminator */ ++ if (len < 1) { ++ err = BCME_BUFTOOSHORT; ++ goto exit; ++ } ++ *vp++ = '\0'; ++ ++ *base = vp; ++ ++exit: MFREE(osh, flash, NVRAM_SPACE); ++ return err; +} + -+module_init(gpio_init); -+module_exit(gpio_exit); -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmdevs.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmdevs.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmdevs.h 2005-12-16 23:39:10.672819750 +0100 -@@ -0,0 +1,391 @@ +/* -+ * Broadcom device-specific manifest constants. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Initialize nonvolatile variable table from flash. ++ * Return 0 on success, nonzero on error. + */ ++static int ++initvars_flash_sb(void *sbh, char **vars, uint *count) ++{ ++ osl_t *osh = sb_osh(sbh); ++ char devpath[SB_DEVPATH_BUFSZ]; ++ char *vp, *base; ++ int err; + -+#ifndef _BCMDEVS_H -+#define _BCMDEVS_H ++ ASSERT(vars); ++ ASSERT(count); + ++ if ((err = sb_devpath(sbh, devpath, sizeof(devpath)))) ++ return err; + -+/* Known PCI vendor Id's */ -+#define VENDOR_EPIGRAM 0xfeda -+#define VENDOR_BROADCOM 0x14e4 -+#define VENDOR_3COM 0x10b7 -+#define VENDOR_NETGEAR 0x1385 -+#define VENDOR_DIAMOND 0x1092 -+#define VENDOR_DELL 0x1028 -+#define VENDOR_HP 0x0e11 -+#define VENDOR_APPLE 0x106b ++ base = vp = MALLOC(osh, VARS_MAX); ++ ASSERT(vp); ++ if (!vp) ++ return BCME_NOMEM; + -+/* PCI Device Id's */ -+#define BCM4210_DEVICE_ID 0x1072 /* never used */ -+#define BCM4211_DEVICE_ID 0x4211 -+#define BCM4230_DEVICE_ID 0x1086 /* never used */ -+#define BCM4231_DEVICE_ID 0x4231 ++ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath))) ++ goto err; + -+#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ -+#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ -+#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ -+#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ ++ err = initvars_table(osh, base, vp, vars, count); + -+#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ -+#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ ++err: MFREE(osh, base, VARS_MAX); ++ return err; ++} + -+#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ -+#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ ++#ifdef WLTEST ++char mfgsromvars[256]; ++char *defaultsromvars = "il0macaddr=00:11:22:33:44:51\0" ++ "et0macaddr=00:11:22:33:44:52\0" ++ "et1macaddr=00:11:22:33:44:53\0" ++ "boardtype=0xffff\0" ++ "boardrev=0x10\0" ++ "boardflags=8\0" ++ "sromrev=2\0" ++ "aa2g=3"; ++#define MFGSROM_DEFVARSLEN 147 /* default srom len */ ++#endif /* WL_TEST */ + -+#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ -+#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ -+#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ -+#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ -+#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ -+#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ -+#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ -+#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ -+#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ -+#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ -+#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ ++/* ++ * Initialize nonvolatile variable table from sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++initvars_srom_pci(void *sbh, void *curmap, char **vars, uint *count) ++{ ++ uint16 w, *b; ++ uint8 sromrev = 0; ++ struct ether_addr ea; ++ char eabuf[32]; ++ uint32 w32; ++ int woff, i; ++ char *vp, *base; ++ osl_t *osh = sb_osh(sbh); ++ bool flash = FALSE; ++ char name[SB_DEVPATH_BUFSZ+16], *value; ++ char devpath[SB_DEVPATH_BUFSZ]; ++ int err; + -+#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ ++ /* ++ * Apply CRC over SROM content regardless SROM is present or not, ++ * and use variable sromrev's existance in flash to decide ++ * if we should return an error when CRC fails or read SROM variables ++ * from flash. ++ */ ++ b = MALLOC(osh, SROM_MAX); ++ ASSERT(b); ++ if (!b) ++ return -2; + -+#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ -+#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ -+#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ -+#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ -+#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ -+#define BCM4610_USB_ID 0x4615 /* 4610 usb */ ++ err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, ++ 64, TRUE); ++ if (b[SROM4_SIGN] == SROM4_SIGNATURE) { ++ /* sromrev >= 4, read more */ ++ err = sprom_read_pci(osh, (void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, SROM4_WORDS, TRUE); ++ sromrev = b[SROM4_WORDS - 1] & 0xff; ++ } else if (err == 0) { ++ /* srom is good and is rev < 4 */ ++ /* top word of sprom contains version and crc8 */ ++ sromrev = b[63] & 0xff; ++ /* bcm4401 sroms misprogrammed */ ++ if (sromrev == 0x10) ++ sromrev = 1; ++ } + -+#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ -+#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ -+#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ -+#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ ++ if (err) { ++#ifdef WLTEST ++ BS_ERROR(("SROM Crc Error, so see if we could use a default\n")); ++ w32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); ++ if (w32 & SPROM_OTPIN_USE) { ++ BS_ERROR(("srom crc failed with OTP, use default vars....\n")); ++ vp = base = mfgsromvars; ++ if (sb_chip(sbh) == BCM4311_CHIP_ID) { ++ BS_ERROR(("setting the devid to be 4311\n")); ++ vp += sprintf(vp, "devid=0x4311"); ++ vp++; ++ } ++ bcopy(defaultsromvars, vp, MFGSROM_DEFVARSLEN); ++ vp += MFGSROM_DEFVARSLEN; ++ goto varsdone; ++ } else { ++ BS_ERROR(("srom crc failed with SPROM....\n")); ++#endif /* WLTEST */ ++ if ((err = sb_devpath(sbh, devpath, sizeof(devpath)))) ++ return err; ++ sprintf(name, "%ssromrev", devpath); ++ if (!(value = getvar(NULL, name))) ++ return (-1); ++ sromrev = (uint8)bcm_strtoul(value, NULL, 0); ++ flash = TRUE; ++#ifdef WLTEST ++ } ++#endif /* WLTEST */ ++ } + -+#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ -+#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ ++ /* srom version check */ ++ if (sromrev > 4) ++ return (-2); + -+#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ -+#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ -+#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ -+#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ ++ ASSERT(vars); ++ ASSERT(count); + -+#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ -+#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ -+#define BCM4306_D11G_ID2 0x4325 -+#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ -+#define BCM4306_UART_ID 0x4322 /* 4306 uart */ -+#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ -+#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ ++ base = vp = MALLOC(osh, VARS_MAX); ++ ASSERT(vp); ++ if (!vp) ++ return -2; + -+#define BCM4309_PKG_ID 1 /* 4309 package id */ ++ /* read variables from flash */ ++ if (flash) { ++ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath))) ++ goto err; ++ goto varsdone; ++ } + -+#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ -+#define BCM4303_PKG_ID 2 /* 4303 package id */ ++ vp += sprintf(vp, "sromrev=%d", sromrev); ++ vp++; + -+#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ -+#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ -+#define BCM4310_UART_ID 0x4312 /* 4310 uart */ -+#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ -+#define BCM4310_USB_ID 0x4315 /* 4310 usb */ ++ if (sromrev >= 4) { ++ uint path, pathbase; ++ const uint pathbases[MAX_PATH] = {SROM4_PATH0, SROM4_PATH1, ++ SROM4_PATH2, SROM4_PATH3}; + -+#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ -+#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ ++ vp += sprintf(vp, "boardrev=%d", b[SROM4_BREV]); ++ vp++; + ++ vp += sprintf(vp, "boardflags=%d", (b[SROM4_BFL1] << 16) | b[SROM4_BFL0]); ++ vp++; + -+#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ -+#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ ++ vp += sprintf(vp, "boardflags2=%d", (b[SROM4_BFL3] << 16) | b[SROM4_BFL2]); ++ vp++; + -+#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ ++ /* The macaddr */ ++ ea.octet[0] = (b[SROM4_MACHI] >> 8) & 0xff; ++ ea.octet[1] = b[SROM4_MACHI] & 0xff; ++ ea.octet[2] = (b[SROM4_MACMID] >> 8) & 0xff; ++ ea.octet[3] = b[SROM4_MACMID] & 0xff; ++ ea.octet[4] = (b[SROM4_MACLO] >> 8) & 0xff; ++ ea.octet[5] = b[SROM4_MACLO] & 0xff; ++ bcm_ether_ntoa(&ea, eabuf); ++ vp += sprintf(vp, "macaddr=%s", eabuf); ++ vp++; + -+#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */ -+#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */ -+#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */ -+#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */ ++ w = b[SROM4_CCODE]; ++ if (w == 0) ++ vp += sprintf(vp, "ccode="); ++ else ++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); ++ vp++; ++ vp += sprintf(vp, "regrev=%d", b[SROM4_REGREV]); ++ vp++; + -+#define FPGA_JTAGM_ID 0x4330 /* ??? */ ++ w = b[SROM4_LEDBH10]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* ledbh0 */ ++ vp += sprintf(vp, "ledbh0=%d", (w & 0xff)); ++ vp++; + -+/* Address map */ -+#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ -+#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ -+#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ ++ /* ledbh1 */ ++ vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ w = b[SROM4_LEDBH32]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* ledbh2 */ ++ vp += sprintf(vp, "ledbh2=%d", w & 0xff); ++ vp++; + -+/* Core register space */ -+#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ -+#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ -+#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ -+#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ -+#define BCM4710_REG_USB 0x18004000 /* USB core registers */ -+#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ -+#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ -+#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ -+#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ ++ /* ledbh3 */ ++ vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ /* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */ ++ if (w != 0xffff) { ++ w = b[SROM4_LEDDC]; ++ w32 = ((uint32)((unsigned char)(w >> 8) & 0xff) << 24) | /* oncount */ ++ ((uint32)((unsigned char)(w & 0xff)) << 8); /* offcount */ ++ vp += sprintf(vp, "leddc=%d", w32); ++ vp++; ++ } + -+#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ -+#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ -+#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ -+#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ -+#define BCM4710_PROG 0x1f800000 /* Programable interface */ -+#define BCM4710_FLASH 0x1fc00000 /* Flash */ ++ w = b[SROM4_AA]; ++ vp += sprintf(vp, "aa2g=%d", w & SROM4_AA2G_MASK); ++ vp++; ++ vp += sprintf(vp, "aa5g=%d", w >> SROM4_AA5G_SHIFT); ++ vp++; + -+#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ w = b[SROM4_AG10]; ++ vp += sprintf(vp, "ag0=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); ++ vp++; ++ w = b[SROM4_AG32]; ++ vp += sprintf(vp, "ag2=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "ag3=%d", (w >> 8) & 0xff); ++ vp++; + -+#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) ++ /* Fixed power indices when power control is disabled */ ++ for (i = 0; i < 2; i++) { ++ w = b[SROM4_TXPID2G + i]; ++ vp += sprintf(vp, "txpid2ga%d=%d", 2 * i, w & 0xff); ++ vp++; ++ vp += sprintf(vp, "txpid2ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff); ++ vp++; ++ w = b[SROM4_TXPID5G + i]; ++ vp += sprintf(vp, "txpid5ga%d=%d", 2 * i, w & 0xff); ++ vp++; ++ vp += sprintf(vp, "txpid5ga%d=%d", (2 * i) + 1, (w >> 8) & 0xff); ++ vp++; ++ w = b[SROM4_TXPID5GL + i]; ++ vp += sprintf(vp, "txpid5gla%d=%d", 2 * i, w & 0xff); ++ vp++; ++ vp += sprintf(vp, "txpid5gla%d=%d", (2 * i) + 1, (w >> 8) & 0xff); ++ vp++; ++ w = b[SROM4_TXPID5GH + i]; ++ vp += sprintf(vp, "txpid5gha%d=%d", 2 * i, w & 0xff); ++ vp++; ++ vp += sprintf(vp, "txpid5gha%d=%d", (2 * i) + 1, (w >> 8) & 0xff); ++ vp++; ++ } + -+#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) -+#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++ /* Per path variables */ ++ for (path = 0; path < MAX_PATH; path++) { ++ pathbase = pathbases[path]; ++ w = b[pathbase + SROM4_2G_ITT_MAXP]; ++ vp += sprintf(vp, "itt2ga%d=%d", path, w >> B2G_ITT_SHIFT); ++ vp++; ++ vp += sprintf(vp, "maxp2ga%d=%d", path, w & B2G_MAXP_MASK); ++ vp++; + -+#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ -+#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ -+#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ -+#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ -+#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ ++ for (i = 0; i < 4; i++) { ++ vp += sprintf(vp, "pa2gw%da%d=%d", i, path, ++ b[pathbase + SROM4_2G_PA + i]); ++ vp++; ++ } + -+#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ ++ w = b[pathbase + SROM4_5G_ITT_MAXP]; ++ vp += sprintf(vp, "itt5ga%d=%d", path, w >> B5G_ITT_SHIFT); ++ vp++; ++ vp += sprintf(vp, "maxp5ga%d=%d", path, w & B5G_MAXP_MASK); ++ vp++; + -+#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ -+#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */ -+#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */ ++ w = b[pathbase + SROM4_5GLH_MAXP]; ++ vp += sprintf(vp, "maxp5lga%d=%d", path, w >> B5GL_MAXP_SHIFT); ++ vp++; ++ vp += sprintf(vp, "maxp5gha%d=%d", path, w & B5GH_MAXP_MASK); ++ vp++; + -+#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */ ++ for (i = 0; i < 4; i++) { ++ vp += sprintf(vp, "pa5gw%da%d=%d", i, path, ++ b[pathbase + SROM4_5G_PA + i]); ++ vp++; ++ vp += sprintf(vp, "pa5glw%da%d=%d", i, path, ++ b[pathbase + SROM4_5GL_PA + i]); ++ vp++; ++ vp += sprintf(vp, "pa5hgw%da%d=%d", i, path, ++ b[pathbase + SROM4_5GH_PA + i]); ++ vp++; ++ } ++ } + -+/* PCMCIA vendor Id's */ ++ vp += sprintf(vp, "cck2gpo=%d", b[SROM4_2G_CCKPO]); ++ vp++; + -+#define VENDOR_BROADCOM_PCMCIA 0x02d0 ++ w32 = ((uint32)b[SROM4_2G_OFDMPO + 1] << 16) | b[SROM4_2G_OFDMPO]; ++ vp += sprintf(vp, "ofdm2gpo=%d", w32); ++ vp++; + -+/* SDIO vendor Id's */ -+#define VENDOR_BROADCOM_SDIO 0x00BF ++ w32 = ((uint32)b[SROM4_5G_OFDMPO + 1] << 16) | b[SROM4_5G_OFDMPO]; ++ vp += sprintf(vp, "ofdm5gpo=%d", w32); ++ vp++; + ++ w32 = ((uint32)b[SROM4_5GL_OFDMPO + 1] << 16) | b[SROM4_5GL_OFDMPO]; ++ vp += sprintf(vp, "ofdm5glpo=%d", w32); ++ vp++; + -+/* boardflags */ -+#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ -+#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ -+#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ -+#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ -+#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ -+#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ -+#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ -+#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ -+#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ -+#define BFL_FEM 0x0800 /* This board supports the Front End Module */ -+#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ -+#define BFL_HGPA 0x2000 /* This board has a high gain PA */ -+#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ -+#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ ++ w32 = ((uint32)b[SROM4_5GH_OFDMPO + 1] << 16) | b[SROM4_5GH_OFDMPO]; ++ vp += sprintf(vp, "ofdm5ghpo=%d", w32); ++ vp++; + -+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ -+#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ -+#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ -+#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ -+#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ -+#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ -+#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ -+#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ -+#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ -+#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ -+#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ ++ for (i = 0; i < 8; i++) { ++ vp += sprintf(vp, "mcs2gpo%d=%d", i, b[SROM4_2G_MCSPO]); ++ vp++; ++ vp += sprintf(vp, "mcs5gpo%d=%d", i, b[SROM4_5G_MCSPO]); ++ vp++; ++ vp += sprintf(vp, "mcs5glpo%d=%d", i, b[SROM4_5GL_MCSPO]); ++ vp++; ++ vp += sprintf(vp, "mcs5ghpo%d=%d", i, b[SROM4_5GH_MCSPO]); ++ vp++; ++ } + -+/* Bus types */ -+#define SB_BUS 0 /* Silicon Backplane */ -+#define PCI_BUS 1 /* PCI target */ -+#define PCMCIA_BUS 2 /* PCMCIA target */ -+#define SDIO_BUS 3 /* SDIO target */ -+#define JTAG_BUS 4 /* JTAG */ ++ vp += sprintf(vp, "ccdpo%d=%d", i, b[SROM4_CCDPO]); ++ vp++; ++ vp += sprintf(vp, "stbcpo%d=%d", i, b[SROM4_STBCPO]); ++ vp++; ++ vp += sprintf(vp, "bw40po%d=%d", i, b[SROM4_BW40PO]); ++ vp++; ++ vp += sprintf(vp, "bwduppo%d=%d", i, b[SROM4_BWDUPPO]); ++ vp++; + -+/* Allows optimization for single-bus support */ -+#ifdef BCMBUSTYPE -+#define BUSTYPE(bus) (BCMBUSTYPE) -+#else -+#define BUSTYPE(bus) (bus) -+#endif ++ goto done; ++ } ++ if (sromrev >= 3) { ++ /* New section takes over the 3th hardware function space */ + -+/* power control defines */ -+#define PLL_DELAY 150 /* us pll on delay */ -+#define FREF_DELAY 200 /* us fref change delay */ -+#define MIN_SLOW_CLK 32 /* us Slow clock period */ -+#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ ++ /* Words 22+23 are 11a (mid) ofdm power offsets */ ++ w32 = ((uint32)b[23] << 16) | b[22]; ++ vp += sprintf(vp, "ofdmapo=%d", w32); ++ vp++; + -+/* Reference Board Types */ ++ /* Words 24+25 are 11a (low) ofdm power offsets */ ++ w32 = ((uint32)b[25] << 16) | b[24]; ++ vp += sprintf(vp, "ofdmalpo=%d", w32); ++ vp++; + -+#define BU4710_BOARD 0x0400 -+#define VSIM4710_BOARD 0x0401 -+#define QT4710_BOARD 0x0402 ++ /* Words 26+27 are 11a (high) ofdm power offsets */ ++ w32 = ((uint32)b[27] << 16) | b[26]; ++ vp += sprintf(vp, "ofdmahpo=%d", w32); ++ vp++; + -+#define BU4610_BOARD 0x0403 -+#define VSIM4610_BOARD 0x0404 ++ /* LED Powersave duty cycle (oncount >> 24) (offcount >> 8) */ ++ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xff) << 24) | /* oncount */ ++ ((uint32)((unsigned char)(b[21] & 0xff)) << 8); /* offcount */ ++ vp += sprintf(vp, "leddc=%d", w32); + -+#define BU4307_BOARD 0x0405 -+#define BCM94301CB_BOARD 0x0406 -+#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ -+#define BCM94301MP_BOARD 0x0407 -+#define BCM94307MP_BOARD 0x0408 -+#define BCMAP4307_BOARD 0x0409 ++ vp++; ++ } + -+#define BU4309_BOARD 0x040a -+#define BCM94309CB_BOARD 0x040b -+#define BCM94309MP_BOARD 0x040c -+#define BCM4309AP_BOARD 0x040d ++ if (sromrev >= 2) { ++ /* New section takes over the 4th hardware function space */ + -+#define BCM94302MP_BOARD 0x040e ++ /* Word 29 is max power 11a high/low */ ++ w = b[29]; ++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); ++ vp++; + -+#define VSIM4310_BOARD 0x040f -+#define BU4711_BOARD 0x0410 -+#define BCM94310U_BOARD 0x0411 -+#define BCM94310AP_BOARD 0x0412 -+#define BCM94310MP_BOARD 0x0414 ++ /* Words 30-32 set the 11alow pa settings, ++ * 33-35 are the 11ahigh ones. ++ */ ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); ++ vp++; ++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); ++ vp++; ++ } ++ w = b[59]; ++ if (w == 0) ++ vp += sprintf(vp, "ccode="); ++ else ++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); ++ vp++; + -+#define BU4306_BOARD 0x0416 -+#define BCM94306CB_BOARD 0x0417 -+#define BCM94306MP_BOARD 0x0418 ++ } + -+#define BCM94710D_BOARD 0x041a -+#define BCM94710R1_BOARD 0x041b -+#define BCM94710R4_BOARD 0x041c -+#define BCM94710AP_BOARD 0x041d ++ /* parameter section of sprom starts at byte offset 72 */ ++ woff = 72/2; + ++ /* first 6 bytes are il0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += 3; ++ bcm_ether_ntoa(&ea, eabuf); ++ vp += sprintf(vp, "il0macaddr=%s", eabuf); ++ vp++; + -+#define BU2050_BOARD 0x041f ++ /* next 6 bytes are et0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += 3; ++ bcm_ether_ntoa(&ea, eabuf); ++ vp += sprintf(vp, "et0macaddr=%s", eabuf); ++ vp++; + ++ /* next 6 bytes are et1macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += 3; ++ bcm_ether_ntoa(&ea, eabuf); ++ vp += sprintf(vp, "et1macaddr=%s", eabuf); ++ vp++; + -+#define BCM94309G_BOARD 0x0421 ++ /* ++ * Enet phy settings one or two singles or a dual ++ * Bits 4-0 : MII address for enet0 (0x1f for not there) ++ * Bits 9-5 : MII address for enet1 (0x1f for not there) ++ * Bit 14 : Mdio for enet0 ++ * Bit 15 : Mdio for enet1 ++ */ ++ w = b[woff]; ++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); ++ vp++; ++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); ++ vp++; + -+#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ ++ /* Word 46 has board rev, antennas 0/1 & Country code/control */ ++ w = b[46]; ++ vp += sprintf(vp, "boardrev=%d", w & 0xff); ++ vp++; + -+#define BU4704_BOARD 0x0423 -+#define BU4702_BOARD 0x0424 ++ if (sromrev > 1) ++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); ++ else ++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); ++ vp++; + -+#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ -+ -+#define BU4317_BOARD 0x0426 ++ vp += sprintf(vp, "aa2g=%d", (w >> 12) & 0x3); ++ vp++; + ++ vp += sprintf(vp, "aa5g=%d", (w >> 14) & 0x3); ++ vp++; + -+#define BCM94702MN_BOARD 0x0428 ++ /* Words 47-49 set the (wl) pa settings */ ++ woff = 47; + -+/* BCM4702 1U CompactPCI Board */ -+#define BCM94702CPCI_BOARD 0x0429 ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); ++ vp++; ++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); ++ vp++; ++ } + -+/* BCM4702 with BCM95380 VLAN Router */ -+#define BCM95380RR_BOARD 0x042a ++ /* ++ * Words 50-51 set the customer-configured wl led behavior. ++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; ++ * LED behavior values defined in wlioctl.h . ++ */ ++ w = b[50]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* ledbh0 */ ++ vp += sprintf(vp, "ledbh0=%d", (w & 0xff)); ++ vp++; + -+/* cb4306 with SiGe PA */ -+#define BCM94306CBSG_BOARD 0x042b ++ /* ledbh1 */ ++ vp += sprintf(vp, "ledbh1=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ w = b[51]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* ledbh2 */ ++ vp += sprintf(vp, "ledbh2=%d", w & 0xff); ++ vp++; + -+/* mp4301 with 2050 radio */ -+#define BCM94301MPL_BOARD 0x042c ++ /* ledbh */ ++ vp += sprintf(vp, "ledbh3=%d", (w >> 8) & 0xff); ++ vp++; ++ } + -+/* cb4306 with SiGe PA */ -+#define PCSG94306_BOARD 0x042d ++ /* Word 52 is max power 0/1 */ ++ w = b[52]; ++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); ++ vp++; + -+/* bu4704 with sdram */ -+#define BU4704SD_BOARD 0x042e ++ /* Word 56 is idle tssi target 0/1 */ ++ w = b[56]; ++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); ++ vp++; + -+/* Dual 11a/11g Router */ -+#define BCM94704AGR_BOARD 0x042f ++ /* Word 57 is boardflags, if not programmed make it zero */ ++ w32 = (uint32)b[57]; ++ if (w32 == 0xffff) w32 = 0; ++ if (sromrev > 1) { ++ /* Word 28 is the high bits of boardflags */ ++ w32 |= (uint32)b[28] << 16; ++ } ++ vp += sprintf(vp, "boardflags=%d", w32); ++ vp++; + -+/* 11a-only minipci */ -+#define BCM94308MP_BOARD 0x0430 ++ /* Word 58 is antenna gain 0/1 */ ++ w = b[58]; ++ vp += sprintf(vp, "ag0=%d", w & 0xff); ++ vp++; + ++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); ++ vp++; + ++ if (sromrev == 1) { ++ /* set the oem string */ ++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", ++ ((b[59] >> 8) & 0xff), (b[59] & 0xff), ++ ((b[60] >> 8) & 0xff), (b[60] & 0xff), ++ ((b[61] >> 8) & 0xff), (b[61] & 0xff), ++ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); ++ vp++; ++ } else if (sromrev == 2) { ++ /* Word 60 OFDM tx power offset from CCK level */ ++ /* OFDM Power Offset - opo */ ++ vp += sprintf(vp, "opo=%d", b[60] & 0xff); ++ vp++; ++ } else { ++ /* Word 60: cck power offsets */ ++ vp += sprintf(vp, "cckpo=%d", b[60]); ++ vp++; + -+/* BCM94317 boards */ -+#define BCM94317CB_BOARD 0x0440 -+#define BCM94317MP_BOARD 0x0441 -+#define BCM94317PCMCIA_BOARD 0x0442 -+#define BCM94317SDIO_BOARD 0x0443 ++ /* Words 61+62: 11g ofdm power offsets */ ++ w32 = ((uint32)b[62] << 16) | b[61]; ++ vp += sprintf(vp, "ofdmgpo=%d", w32); ++ vp++; ++ } + -+#define BU4712_BOARD 0x0444 -+#define BU4712SD_BOARD 0x045d -+#define BU4712L_BOARD 0x045f ++ /* final nullbyte terminator */ ++done: *vp++ = '\0'; + -+/* BCM4712 boards */ -+#define BCM94712AP_BOARD 0x0445 -+#define BCM94712P_BOARD 0x0446 ++ ASSERT((vp - base) <= VARS_MAX); + -+/* BCM4318 boards */ -+#define BU4318_BOARD 0x0447 -+#define CB4318_BOARD 0x0448 -+#define MPG4318_BOARD 0x0449 -+#define MP4318_BOARD 0x044a -+#define SD4318_BOARD 0x044b ++varsdone: ++ err = initvars_table(osh, base, vp, vars, count); + -+/* BCM63XX boards */ -+#define BCM96338_BOARD 0x6338 -+#define BCM96345_BOARD 0x6345 -+#define BCM96348_BOARD 0x6348 ++err: ++#ifdef WLTEST ++ if (base != mfgsromvars) ++#endif ++ MFREE(osh, base, VARS_MAX); ++ MFREE(osh, b, SROM_MAX); ++ return err; ++} + -+/* Another mp4306 with SiGe */ -+#define BCM94306P_BOARD 0x044c ++/* ++ * Read the cis and call parsecis to initialize the vars. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, uint *count) ++{ ++ uint8 *cis = NULL; ++ int rc; ++ uint data_sz; + -+/* CF-like 4317 modules */ -+#define BCM94317CF_BOARD 0x044d ++ data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE; + -+/* mp4303 */ -+#define BCM94303MP_BOARD 0x044e ++ if ((cis = MALLOC(osh, data_sz)) == NULL) ++ return (-2); + -+/* mpsgh4306 */ -+#define BCM94306MPSGH_BOARD 0x044f ++ if (sb_pcmciarev(sbh) == 1) { ++ if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) { ++ MFREE(osh, cis, data_sz); ++ return (-1); ++ } ++ /* fix up endianess for 16-bit data vs 8-bit parsing */ ++ ltoh16_buf((uint16 *)cis, data_sz); ++ } else ++ OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz); + -+/* BRCM 4306 w/ Front End Modules */ -+#define BCM94306MPM 0x0450 -+#define BCM94306MPL 0x0453 ++ rc = srom_parsecis(osh, &cis, 1, vars, count); + -+/* 4712agr */ -+#define BCM94712AGR_BOARD 0x0451 ++ MFREE(osh, cis, data_sz); + -+/* The real CF 4317 board */ -+#define CFI4317_BOARD 0x0452 ++ return (rc); ++} + -+/* pcmcia 4303 */ -+#define PC4303_BOARD 0x0454 +diff -urN linux.old/arch/mips/bcm947xx/bcmutils.c linux.dev/arch/mips/bcm947xx/bcmutils.c +--- linux.old/arch/mips/bcm947xx/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/bcmutils.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,247 @@ ++/* ++ * Misc useful OS-independent routines. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id: bcmutils.c,v 1.1.1.12 2006/02/27 03:43:16 honor Exp $ ++ */ + -+/* 5350K */ -+#define BCM95350K_BOARD 0x0455 ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+/* 5350R */ -+#define BCM95350R_BOARD 0x0456 ++unsigned char bcm_ctype[] = { ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ ++ _BCM_C, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C, ++ _BCM_C, /* 8-15 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ ++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ ++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ ++ _BCM_P, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, ++ _BCM_U|_BCM_X, _BCM_U, /* 64-71 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ ++ _BCM_P, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, ++ _BCM_L|_BCM_X, _BCM_L, /* 96-103 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 128-143 */ ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 144-159 */ ++ _BCM_S|_BCM_SP, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, ++ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 160-175 */ ++ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, ++ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 176-191 */ ++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, ++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, /* 192-207 */ ++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_P, _BCM_U, _BCM_U, _BCM_U, ++ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_L, /* 208-223 */ ++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, ++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, /* 224-239 */ ++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_P, _BCM_L, _BCM_L, _BCM_L, ++ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L /* 240-255 */ ++}; + -+/* 4306mplna */ -+#define BCM94306MPLNA_BOARD 0x0457 + -+/* 4320 boards */ -+#define BU4320_BOARD 0x0458 -+#define BU4320S_BOARD 0x0459 -+#define BCM94320PH_BOARD 0x045a ++ulong ++bcm_strtoul(char *cp, char **endp, uint base) ++{ ++ ulong result, value; ++ bool minus; + -+/* 4306mph */ -+#define BCM94306MPH_BOARD 0x045b ++ minus = FALSE; + -+/* 4306pciv */ -+#define BCM94306PCIV_BOARD 0x045c ++ while (bcm_isspace(*cp)) ++ cp++; + -+#define BU4712SD_BOARD 0x045d ++ if (cp[0] == '+') ++ cp++; ++ else if (cp[0] == '-') { ++ minus = TRUE; ++ cp++; ++ } + -+#define BCM94320PFLSH_BOARD 0x045e ++ if (base == 0) { ++ if (cp[0] == '0') { ++ if ((cp[1] == 'x') || (cp[1] == 'X')) { ++ base = 16; ++ cp = &cp[2]; ++ } else { ++ base = 8; ++ cp = &cp[1]; ++ } ++ } else ++ base = 10; ++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { ++ cp = &cp[2]; ++ } + -+#define BU4712L_BOARD 0x045f -+#define BCM94712LGR_BOARD 0x0460 -+#define BCM94320R_BOARD 0x0461 ++ result = 0; + -+#define BU5352_BOARD 0x0462 ++ while (bcm_isxdigit(*cp) && ++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { ++ result = result*base + value; ++ cp++; ++ } + -+#define BCM94318MPGH_BOARD 0x0463 ++ if (minus) ++ result = (ulong)(result * -1); + ++ if (endp) ++ *endp = (char *)cp; + -+#define BCM95352GR_BOARD 0x0467 ++ return (result); ++} + -+/* bcm95351agr */ -+#define BCM95351AGR_BOARD 0x0470 ++uchar ++bcm_toupper(uchar c) ++{ ++ if (bcm_islower(c)) ++ c -= 'a'-'A'; ++ return (c); ++} + -+/* # of GPIO pins */ -+#define GPIO_NUMPINS 16 ++char* ++bcm_ether_ntoa(struct ether_addr *ea, char *buf) ++{ ++ sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x", ++ ea->octet[0]&0xff, ea->octet[1]&0xff, ea->octet[2]&0xff, ++ ea->octet[3]&0xff, ea->octet[4]&0xff, ea->octet[5]&0xff); ++ return (buf); ++} + -+#endif /* _BCMDEVS_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmendian.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmendian.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmendian.h 2005-12-16 23:39:10.672819750 +0100 -@@ -0,0 +1,152 @@ -+/* -+ * local version of endian.h - byte order defines -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+*/ + -+#ifndef _BCMENDIAN_H_ -+#define _BCMENDIAN_H_ ++/* ++ * Search the name=value vars for a specific one and return its value. ++ * Returns NULL if not found. ++ */ ++char* ++getvar(char *vars, char *name) ++{ ++ char *s; ++ int len; + -+#include ++ len = strlen(name); + -+/* Byte swap a 16 bit value */ -+#define BCMSWAP16(val) \ -+ ((uint16)( \ -+ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ -+ (((uint16)(val) & (uint16)0xff00U) >> 8) )) -+ -+/* Byte swap a 32 bit value */ -+#define BCMSWAP32(val) \ -+ ((uint32)( \ -+ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ -+ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ -+ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ -+ (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) -+ -+/* 2 Byte swap a 32 bit value */ -+#define BCMSWAP32BY16(val) \ -+ ((uint32)( \ -+ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \ -+ (((uint32)(val) & (uint32)0xffff0000UL) >> 16) )) -+ ++ /* first look in vars[] */ ++ for (s = vars; s && *s;) { ++ /* CSTYLED */ ++ if ((memcmp(s, name, len) == 0) && (s[len] == '=')) ++ return (&s[len+1]); + -+static INLINE uint16 -+bcmswap16(uint16 val) -+{ -+ return BCMSWAP16(val); -+} ++ while (*s++) ++ ; ++ } + -+static INLINE uint32 -+bcmswap32(uint32 val) -+{ -+ return BCMSWAP32(val); ++ /* then query nvram */ ++ return (nvram_get(name)); +} + -+static INLINE uint32 -+bcmswap32by16(uint32 val) ++/* ++ * Search the vars for a specific one and return its value as ++ * an integer. Returns 0 if not found. ++ */ ++int ++getintvar(char *vars, char *name) +{ -+ return BCMSWAP32BY16(val); -+} ++ char *val; + -+/* buf - start of buffer of shorts to swap */ -+/* len - byte length of buffer */ -+static INLINE void -+bcmswap16_buf(uint16 *buf, uint len) -+{ -+ len = len/2; ++ if ((val = getvar(vars, name)) == NULL) ++ return (0); + -+ while(len--){ -+ *buf = bcmswap16(*buf); -+ buf++; -+ } ++ return (bcm_strtoul(val, NULL, 0)); +} + -+#ifndef hton16 -+#ifndef IL_BIGENDIAN -+#define HTON16(i) BCMSWAP16(i) -+#define hton16(i) bcmswap16(i) -+#define hton32(i) bcmswap32(i) -+#define ntoh16(i) bcmswap16(i) -+#define ntoh32(i) bcmswap32(i) -+#define ltoh16(i) (i) -+#define ltoh32(i) (i) -+#define htol16(i) (i) -+#define htol32(i) (i) -+#else -+#define HTON16(i) (i) -+#define hton16(i) (i) -+#define hton32(i) (i) -+#define ntoh16(i) (i) -+#define ntoh32(i) (i) -+#define ltoh16(i) bcmswap16(i) -+#define ltoh32(i) bcmswap32(i) -+#define htol16(i) bcmswap16(i) -+#define htol32(i) bcmswap32(i) -+#endif -+#endif + -+#ifndef IL_BIGENDIAN -+#define ltoh16_buf(buf, i) -+#define htol16_buf(buf, i) -+#else -+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) -+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) -+#endif ++/******************************************************************************* ++ * crc8 ++ * ++ * Computes a crc8 over the input data using the polynomial: ++ * ++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 ++ * ++ * The caller provides the initial value (either CRC8_INIT_VALUE ++ * or the previous returned value) to allow for processing of ++ * discontiguous blocks of data. When generating the CRC the ++ * caller is responsible for complementing the final return value ++ * and inserting it into the byte stream. When checking, a final ++ * return value of CRC8_GOOD_VALUE indicates a valid CRC. ++ * ++ * Reference: Dallas Semiconductor Application Note 27 ++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", ++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., ++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt ++ * ++ * **************************************************************************** ++ */ + -+/* -+* load 16-bit value from unaligned little endian byte array. -+*/ -+static INLINE uint16 -+ltoh16_ua(uint8 *bytes) -+{ -+ return (bytes[1]<<8)+bytes[0]; -+} ++static uint8 crc8_table[256] = { ++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, ++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, ++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, ++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, ++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, ++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, ++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, ++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, ++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, ++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, ++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, ++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, ++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, ++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, ++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, ++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, ++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, ++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, ++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, ++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, ++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, ++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, ++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, ++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, ++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, ++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, ++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, ++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, ++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, ++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, ++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, ++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F ++}; + -+/* -+* load 32-bit value from unaligned little endian byte array. -+*/ -+static INLINE uint32 -+ltoh32_ua(uint8 *bytes) -+{ -+ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0]; -+} ++#define CRC_INNER_LOOP(n, c, x) \ ++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] + -+/* -+* load 16-bit value from unaligned big(network) endian byte array. -+*/ -+static INLINE uint16 -+ntoh16_ua(uint8 *bytes) ++uint8 ++hndcrc8( ++ uint8 *pdata, /* pointer to array of data to process */ ++ uint nbytes, /* number of input data bytes to process */ ++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ ++) +{ -+ return (bytes[0]<<8)+bytes[1]; -+} ++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro ++ * to avoid the undefined and unnecessary (uint8 >> 8) operation. ++ */ ++ while (nbytes-- > 0) ++ crc = crc8_table[(crc ^ *pdata++) & 0xff]; + -+/* -+* load 32-bit value from unaligned big(network) endian byte array. -+*/ -+static INLINE uint32 -+ntoh32_ua(uint8 *bytes) -+{ -+ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; ++ return crc; +} + -+#define ltoh_ua(ptr) ( \ -+ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ -+ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \ -+ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \ -+) -+ -+#define ntoh_ua(ptr) ( \ -+ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ -+ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \ -+ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \ -+) + -+#endif /* _BCMENDIAN_H_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmnvram.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-12-16 23:39:10.700821500 +0100 -@@ -0,0 +1,141 @@ +diff -urN linux.old/arch/mips/bcm947xx/cfe_env.c linux.dev/arch/mips/bcm947xx/cfe_env.c +--- linux.old/arch/mips/bcm947xx/cfe_env.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/cfe_env.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,234 @@ +/* -+ * NVRAM variable manipulation ++ * NVRAM variable manipulation (Linux kernel half) + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2001-2003, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -1212,580 +1484,401 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h linux-2.4.32-brcm/a + * $Id$ + */ + -+#ifndef _bcmnvram_h_ -+#define _bcmnvram_h_ -+ -+#ifndef _LANGUAGE_ASSEMBLY ++#include ++#include ++#include ++#include ++#include ++#include ++#include + +#include ++#include ++#include ++#include + -+struct nvram_header { -+ uint32 magic; -+ uint32 len; -+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ -+ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ -+ uint32 config_ncdl; /* ncdl values for memc */ -+}; -+ -+struct nvram_tuple { -+ char *name; -+ char *value; -+ struct nvram_tuple *next; -+}; -+ -+/* -+ * Initialize NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern int BCMINIT(nvram_init)(void *sbh); -+ -+/* -+ * Disable NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern void BCMINIT(nvram_exit)(void *sbh); ++#define NVRAM_SIZE (0x1ff0) ++static char _nvdata[NVRAM_SIZE] __initdata; ++static char _valuestr[256] __initdata; + +/* -+ * Get the value of an NVRAM variable. The pointer returned may be -+ * invalid after a set. -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined -+ */ -+extern char * BCMINIT(nvram_get)(const char *name); -+ -+/* -+ * Read the reset GPIO value from the nvram and set the GPIO -+ * as input ++ * TLV types. These codes are used in the "type-length-value" ++ * encoding of the items stored in the NVRAM device (flash or EEPROM) ++ * ++ * The layout of the flash/nvram is as follows: ++ * ++ * ++ * ++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. ++ * The "length" field marks the length of the data section, not ++ * including the type and length fields. ++ * ++ * Environment variables are stored as follows: ++ * ++ * = ++ * ++ * If bit 0 (low bit) is set, the length is an 8-bit value. ++ * If bit 0 (low bit) is clear, the length is a 16-bit value ++ * ++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still ++ * indicates the size of the length field. ++ * ++ * Flags are from the constants below: ++ * + */ -+extern int BCMINITFN(nvram_resetgpio_init)(void *sbh); ++#define ENV_LENGTH_16BITS 0x00 /* for low bit */ ++#define ENV_LENGTH_8BITS 0x01 + -+/* -+ * Get the value of an NVRAM variable. -+ * @param name name of variable to get -+ * @return value of variable or NUL if undefined -+ */ -+#define nvram_safe_get(name) (BCMINIT(nvram_get)(name) ? : "") ++#define ENV_TYPE_USER 0x80 + -+/* -+ * Match an NVRAM variable. -+ * @param name name of variable to match -+ * @param match value to compare against value of variable -+ * @return TRUE if variable is defined and its value is string equal -+ * to match or FALSE otherwise -+ */ -+static INLINE int -+nvram_match(char *name, char *match) { -+ const char *value = BCMINIT(nvram_get)(name); -+ return (value && !strcmp(value, match)); -+} ++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) ++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) + +/* -+ * Inversely match an NVRAM variable. -+ * @param name name of variable to match -+ * @param match value to compare against value of variable -+ * @return TRUE if variable is defined and its value is not string -+ * equal to invmatch or FALSE otherwise ++ * The actual TLV types we support + */ -+static INLINE int -+nvram_invmatch(char *name, char *invmatch) { -+ const char *value = BCMINIT(nvram_get)(name); -+ return (value && strcmp(value, invmatch)); -+} + -+/* -+ * Set the value of an NVRAM variable. The name and value strings are -+ * copied into private storage. Pointers to previously set values -+ * may become invalid. The new value may be immediately -+ * retrieved but will not be permanently stored until a commit. -+ * @param name name of variable to set -+ * @param value value of variable -+ * @return 0 on success and errno on failure -+ */ -+extern int BCMINIT(nvram_set)(const char *name, const char *value); ++#define ENV_TLV_TYPE_END 0x00 ++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) + +/* -+ * Unset an NVRAM variable. Pointers to previously set values -+ * remain valid until a set. -+ * @param name name of variable to unset -+ * @return 0 on success and errno on failure -+ * NOTE: use nvram_commit to commit this change to flash. ++ * Environment variable flags + */ -+extern int BCMINIT(nvram_unset)(const char *name); + -+/* -+ * Commit NVRAM variables to permanent storage. All pointers to values -+ * may be invalid after a commit. -+ * NVRAM values are undefined after a commit. -+ * @return 0 on success and errno on failure -+ */ -+extern int BCMINIT(nvram_commit)(void); ++#define ENV_FLG_NORMAL 0x00 /* normal read/write */ ++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ ++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ + -+/* -+ * Get all NVRAM variables (format name=value\0 ... \0\0). -+ * @param buf buffer to store variables -+ * @param count size of buffer in bytes -+ * @return 0 on success and errno on failure -+ */ -+extern int BCMINIT(nvram_getall)(char *buf, int count); ++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ ++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ + -+#endif /* _LANGUAGE_ASSEMBLY */ + -+#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ -+#define NVRAM_VERSION 1 -+#define NVRAM_HEADER_SIZE 20 -+#define NVRAM_SPACE 0x8000 ++/* ********************************************************************* ++ * _nvram_read(buffer,offset,length) ++ * ++ * Read data from the NVRAM device ++ * ++ * Input parameters: ++ * buffer - destination buffer ++ * offset - offset of data to read ++ * length - number of bytes to read ++ * ++ * Return value: ++ * number of bytes read, or <0 if error occured ++ ********************************************************************* */ ++static int ++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) ++{ ++ int i; ++ if (offset > NVRAM_SIZE) ++ return -1; + -+#define NVRAM_MAX_VALUE_LEN 255 -+#define NVRAM_MAX_PARAM_LEN 64 ++ for ( i = 0; i < length; i++) { ++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; ++ } ++ return length; ++} + -+#endif /* _bcmnvram_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmsrom.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmsrom.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,23 @@ -+/* -+ * Misc useful routines to access NIC local SROM/OTP . -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ + -+#ifndef _bcmsrom_h_ -+#define _bcmsrom_h_ ++static char* ++_strnchr(const char *dest,int c,size_t cnt) ++{ ++ while (*dest && (cnt > 0)) { ++ if (*dest == c) return (char *) dest; ++ dest++; ++ cnt--; ++ } ++ return NULL; ++} + -+extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count); + -+extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); -+extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); + -+#endif /* _bcmsrom_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmutils.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmutils.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmutils.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,313 @@ +/* -+ * Misc useful os-independent macros and functions. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Core support API: Externally visible. + */ + -+#ifndef _bcmutils_h_ -+#define _bcmutils_h_ -+ -+/*** driver-only section ***/ -+#ifdef BCMDRIVER -+#include -+ -+#define _BCM_U 0x01 /* upper */ -+#define _BCM_L 0x02 /* lower */ -+#define _BCM_D 0x04 /* digit */ -+#define _BCM_C 0x08 /* cntrl */ -+#define _BCM_P 0x10 /* punct */ -+#define _BCM_S 0x20 /* white space (space/lf/tab) */ -+#define _BCM_X 0x40 /* hex digit */ -+#define _BCM_SP 0x80 /* hard space (0x20) */ -+ -+#define GPIO_PIN_NOTDEFINED 0x20 -+ -+extern unsigned char bcm_ctype[]; -+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) -+ -+#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) -+#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) -+#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) -+#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) -+#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) -+#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) -+#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) -+#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) -+#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) -+#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) -+#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) -+ +/* -+ * Spin at most 'us' microseconds while 'exp' is true. -+ * Caller should explicitly test 'exp' when this completes -+ * and take appropriate error action if 'exp' is still true. ++ * Get the value of an NVRAM variable ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined + */ -+#define SPINWAIT(exp, us) { \ -+ uint countdown = (us) + 9; \ -+ while ((exp) && (countdown >= 10)) {\ -+ OSL_DELAY(10); \ -+ countdown -= 10; \ -+ } \ -+} + -+/* generic osl packet queue */ -+struct pktq { -+ void *head; /* first packet to dequeue */ -+ void *tail; /* last packet to dequeue */ -+ uint len; /* number of queued packets */ -+ uint maxlen; /* maximum number of queued packets */ -+ bool priority; /* enqueue by packet priority */ -+ uint8 prio_map[MAXPRIO+1]; /* user priority to packet enqueue policy map */ -+}; -+#define DEFAULT_QLEN 128 -+ -+#define pktq_len(q) ((q)->len) -+#define pktq_avail(q) ((q)->maxlen - (q)->len) -+#define pktq_head(q) ((q)->head) -+#define pktq_full(q) ((q)->len >= (q)->maxlen) -+#define _pktq_pri(q, pri) ((q)->prio_map[pri]) -+#define pktq_tailpri(q) ((q)->tail ? _pktq_pri(q, PKTPRIO((q)->tail)) : _pktq_pri(q, 0)) ++char* ++cfe_env_get(unsigned char *nv_buf, char* name) ++{ ++ int size; ++ unsigned char *buffer; ++ unsigned char *ptr; ++ unsigned char *envval; ++ unsigned int reclen; ++ unsigned int rectype; ++ int offset; ++ int flg; ++ ++ size = NVRAM_SIZE; ++ buffer = &_nvdata[0]; + -+/* externs */ -+/* packet */ -+extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf); -+extern uint pkttotlen(osl_t *osh, void *); -+extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]); -+extern void pktenq(struct pktq *q, void *p, bool lifo); -+extern void *pktdeq(struct pktq *q); -+extern void *pktdeqtail(struct pktq *q); -+/* string */ -+extern uint bcm_atoi(char *s); -+extern uchar bcm_toupper(uchar c); -+extern ulong bcm_strtoul(char *cp, char **endp, uint base); -+extern char *bcmstrstr(char *haystack, char *needle); -+extern char *bcmstrcat(char *dest, const char *src); -+extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen); -+/* ethernet address */ -+extern char *bcm_ether_ntoa(char *ea, char *buf); -+extern int bcm_ether_atoe(char *p, char *ea); -+/* delay */ -+extern void bcm_mdelay(uint ms); -+/* variable access */ -+extern char *getvar(char *vars, char *name); -+extern int getintvar(char *vars, char *name); -+extern uint getgpiopin(char *vars, char *pin_name, uint def_pin); -+#define bcmlog(fmt, a1, a2) -+#define bcmdumplog(buf, size) *buf = '\0' -+#define bcmdumplogent(buf, idx) -1 ++ ptr = buffer; ++ offset = 0; + -+#endif /* #ifdef BCMDRIVER */ ++ /* Read the record type and length */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ ++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { + -+/*** driver/apps-shared section ***/ ++ /* Adjust pointer for TLV type */ ++ rectype = *(ptr); ++ offset++; ++ size--; + -+#define BCME_STRLEN 64 -+#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) -+ -+ -+/* -+ * error codes could be added but the defined ones shouldn't be changed/deleted -+ * these error codes are exposed to the user code -+ * when ever a new error code is added to this list -+ * please update errorstring table with the related error string and -+ * update osl files with os specific errorcode map -+*/ -+ -+#define BCME_ERROR -1 /* Error generic */ -+#define BCME_BADARG -2 /* Bad Argument */ -+#define BCME_BADOPTION -3 /* Bad option */ -+#define BCME_NOTUP -4 /* Not up */ -+#define BCME_NOTDOWN -5 /* Not down */ -+#define BCME_NOTAP -6 /* Not AP */ -+#define BCME_NOTSTA -7 /* Not STA */ -+#define BCME_BADKEYIDX -8 /* BAD Key Index */ -+#define BCME_RADIOOFF -9 /* Radio Off */ -+#define BCME_NOTBANDLOCKED -10 /* Not bandlocked */ -+#define BCME_NOCLK -11 /* No Clock*/ -+#define BCME_BADRATESET -12 /* BAD RateSet*/ -+#define BCME_BADBAND -13 /* BAD Band */ -+#define BCME_BUFTOOSHORT -14 /* Buffer too short */ -+#define BCME_BUFTOOLONG -15 /* Buffer too Long */ -+#define BCME_BUSY -16 /* Busy*/ -+#define BCME_NOTASSOCIATED -17 /* Not associated*/ -+#define BCME_BADSSIDLEN -18 /* BAD SSID Len */ -+#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel*/ -+#define BCME_BADCHAN -20 /* BAD Channel */ -+#define BCME_BADADDR -21 /* BAD Address*/ -+#define BCME_NORESOURCE -22 /* No resources*/ -+#define BCME_UNSUPPORTED -23 /* Unsupported*/ -+#define BCME_BADLEN -24 /* Bad Length*/ -+#define BCME_NOTREADY -25 /* Not ready Yet*/ -+#define BCME_EPERM -26 /* Not Permitted */ -+#define BCME_NOMEM -27 /* No Memory */ -+#define BCME_ASSOCIATED -28 /* Associated */ -+#define BCME_RANGE -29 /* Range Error*/ -+#define BCME_NOTFOUND -30 /* Not found */ -+#define BCME_LAST BCME_NOTFOUND -+ -+#ifndef ABS -+#define ABS(a) (((a)<0)?-(a):(a)) -+#endif -+ -+#ifndef MIN -+#define MIN(a, b) (((a)<(b))?(a):(b)) -+#endif -+ -+#ifndef MAX -+#define MAX(a, b) (((a)>(b))?(a):(b)) -+#endif ++ /* ++ * Read the length. It can be either 1 or 2 bytes ++ * depending on the code ++ */ ++ if (rectype & ENV_LENGTH_8BITS) { ++ /* Read the record type and length - 8 bits */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ reclen = *(ptr); ++ size--; ++ offset++; ++ } ++ else { ++ /* Read the record type and length - 16 bits, MSB first */ ++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { ++ goto error; ++ } ++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); ++ size -= 2; ++ offset += 2; ++ } + -+#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) -+#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) -+#define ISPOWEROF2(x) ((((x)-1)&(x))==0) -+#define VALID_MASK(mask) !((mask) & ((mask) + 1)) -+#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) -+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) ++ if (reclen > size) ++ break; /* should not happen, bad NVRAM */ + -+/* bit map related macros */ -+#ifndef setbit -+#define NBBY 8 /* 8 bits per byte */ -+#define setbit(a,i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) -+#define clrbit(a,i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -+#define isset(a,i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) -+#define isclr(a,i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) ++ switch (rectype) { ++ case ENV_TLV_TYPE_ENV: ++ /* Read the TLV data */ ++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) ++ goto error; ++ flg = *ptr++; ++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); ++ if (envval) { ++ *envval++ = '\0'; ++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); ++ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; ++#if 0 ++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); +#endif ++ if(!strcmp(ptr, name)){ ++ return _valuestr; ++ } ++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) ++ return _valuestr; ++ } ++ break; ++ ++ default: ++ /* Unknown TLV type, skip it. */ ++ break; ++ } + -+#define NBITS(type) (sizeof(type) * 8) -+#define NBITVAL(bits) (1 << (bits)) -+#define MAXBITVAL(bits) ((1 << (bits)) - 1) -+ -+/* crc defines */ -+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ -+ -+/* bcm_format_flags() bit description structure */ -+typedef struct bcm_bit_desc { -+ uint32 bit; -+ char* name; -+} bcm_bit_desc_t; -+ -+/* tag_ID/length/value_buffer tuple */ -+typedef struct bcm_tlv { -+ uint8 id; -+ uint8 len; -+ uint8 data[1]; -+} bcm_tlv_t; -+ -+/* Check that bcm_tlv_t fits into the given buflen */ -+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) -+ -+/* buffer length for ethernet address from bcm_ether_ntoa() */ -+#define ETHER_ADDR_STR_LEN 18 -+ -+/* unaligned load and store macros */ -+#ifdef IL_BIGENDIAN -+static INLINE uint32 -+load32_ua(uint8 *a) -+{ -+ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); -+} -+ -+static INLINE void -+store32_ua(uint8 *a, uint32 v) -+{ -+ a[0] = (v >> 24) & 0xff; -+ a[1] = (v >> 16) & 0xff; -+ a[2] = (v >> 8) & 0xff; -+ a[3] = v & 0xff; -+} -+ -+static INLINE uint16 -+load16_ua(uint8 *a) -+{ -+ return ((a[0] << 8) | a[1]); -+} -+ -+static INLINE void -+store16_ua(uint8 *a, uint16 v) -+{ -+ a[0] = (v >> 8) & 0xff; -+ a[1] = v & 0xff; -+} -+ -+#else -+ -+static INLINE uint32 -+load32_ua(uint8 *a) -+{ -+ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); -+} ++ /* ++ * Advance to next TLV ++ */ ++ ++ size -= (int)reclen; ++ offset += reclen; + -+static INLINE void -+store32_ua(uint8 *a, uint32 v) -+{ -+ a[3] = (v >> 24) & 0xff; -+ a[2] = (v >> 16) & 0xff; -+ a[1] = (v >> 8) & 0xff; -+ a[0] = v & 0xff; -+} ++ /* Read the next record type */ ++ ptr = buffer; ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) ++ goto error; ++ } + -+static INLINE uint16 -+load16_ua(uint8 *a) -+{ -+ return ((a[1] << 8) | a[0]); -+} ++error: ++ return NULL; + -+static INLINE void -+store16_ua(uint8 *a, uint16 v) -+{ -+ a[1] = (v >> 8) & 0xff; -+ a[0] = v & 0xff; +} + -+#endif -+ -+/* externs */ -+/* crc */ -+extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc); -+extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc); -+extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc); -+/* format/print */ -+/* IE parsing */ -+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); -+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); -+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); +diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/bcm947xx/compressed/Makefile +--- linux.old/arch/mips/bcm947xx/compressed/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/compressed/Makefile 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,33 @@ ++# ++# Makefile for Broadcom BCM947XX boards ++# ++# Copyright 2001-2003, Broadcom Corporation ++# All Rights Reserved. ++# ++# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++# ++# $Id: Makefile,v 1.2 2005/04/02 12:12:57 wbx Exp $ ++# + -+/* bcmerror*/ -+extern const char *bcmerrorstr(int bcmerror); ++OBJCOPY_ARGS = -O binary -R .reginfo -R .note -R .comment -R .mdebug -S ++SYSTEM ?= $(TOPDIR)/vmlinux + -+/* multi-bool data type: set of bools, mbool is true if any is set */ -+typedef uint32 mbool; -+#define mboolset(mb, bit) (mb |= bit) /* set one bool */ -+#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */ -+#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */ -+#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) ++all: vmlinuz + -+/* power conversion */ -+extern uint16 bcm_qdbm_to_mw(uint8 qdbm); -+extern uint8 bcm_mw_to_qdbm(uint16 mw); ++# Don't build dependencies, this may die if $(CC) isn't gcc ++dep: + -+/* generic datastruct to help dump routines */ -+struct fielddesc { -+ char *nameandfmt; -+ uint32 offset; -+ uint32 len; -+}; ++# Create a gzipped version named vmlinuz for compatibility ++vmlinuz: piggy ++ gzip -c9 $< > $@ + -+typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset); -+extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize); ++piggy: $(SYSTEM) ++ $(OBJCOPY) $(OBJCOPY_ARGS) $< $@ + -+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); ++mrproper: clean + -+#endif /* _bcmutils_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h ---- linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-12-16 23:39:10.708822000 +0100 ++clean: ++ rm -f vmlinuz piggy +diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/export.c +--- linux.old/arch/mips/bcm947xx/export.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/export.c 2006-10-02 21:19:59.000000000 +0200 @@ -0,0 +1,71 @@ ++#include ++ ++#define _export(n) \ ++ void n(void); \ ++ EXPORT_SYMBOL(n); ++ ++_export(bcm947xx_sbh) ++ ++_export(sb_attach) ++_export(sb_kattach) ++_export(sb_boardtype) ++_export(sb_boardvendor) ++_export(sb_btcgpiowar) ++_export(sb_bus) ++_export(sb_chip) ++_export(sb_chiprev) ++_export(sb_chipcrev) ++_export(sb_chippkg) ++_export(sb_clkctl_clk) ++_export(sb_clkctl_fast_pwrup_delay) ++_export(sb_clkctl_init) ++_export(sb_clkctl_xtal) ++_export(sb_core_disable) ++_export(sb_core_reset) ++_export(sb_core_tofixup) ++_export(sb_coreflags) ++_export(sb_coreflagshi) ++_export(sb_coreidx) ++_export(sb_coreregs) ++_export(sb_corerev) ++_export(sb_coreunit) ++_export(sb_detach) ++_export(sb_deviceremoved) ++_export(sb_gpiosetcore) ++_export(sb_gpiocontrol) ++_export(sb_gpiointmask) ++_export(sb_gpiointpolarity) ++_export(sb_gpioled) ++_export(sb_gpioin) ++_export(sb_gpioout) ++_export(sb_gpioouten) ++_export(sb_gpiotimerval) ++_export(sb_irq) ++_export(sb_iscoreup) ++_export(sb_pci_setup) ++_export(sb_pcirev) ++_export(sb_pcmcia_init) ++_export(sb_pcmciarev) ++_export(sb_register_intr_callback) ++_export(sb_setcore) ++_export(sb_setcoreidx) ++_export(sb_war16165) ++_export(sb_war32414_forceHT) ++_export(sb_osh) ++ ++_export(getvar) ++_export(getintvar) ++_export(bcm_strtoul) ++_export(bcm_ctype) ++_export(bcm_toupper) ++_export(bcm_ether_ntoa) ++ ++_export(nvram_get) ++_export(nvram_getall) ++_export(nvram_set) ++_export(nvram_unset) ++_export(nvram_commit) ++ ++_export(srom_read) ++_export(srom_write) ++ +diff -urN linux.old/arch/mips/bcm947xx/generic/int-handler.S linux.dev/arch/mips/bcm947xx/generic/int-handler.S +--- linux.old/arch/mips/bcm947xx/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/generic/int-handler.S 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,51 @@ +/* -+ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface -+ * This supports the following chips: BCM42xx, 44xx, 47xx . ++ * Generic interrupt handler for Broadcom MIPS boards + * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Copyright 2004, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: int-handler.S,v 1.1 2005/03/16 13:50:00 wbx Exp $ + */ + -+#ifndef _hnddma_h_ -+#define _hnddma_h_ ++#include + -+/* export structure */ -+typedef volatile struct { -+ /* rx error counters */ -+ uint rxgiants; /* rx giant frames */ -+ uint rxnobuf; /* rx out of dma descriptors */ -+ /* tx error counters */ -+ uint txnobuf; /* tx out of dma descriptors */ -+} hnddma_t; -+ -+#ifndef di_t -+#define di_t void -+#endif -+ -+#ifndef osl_t -+#define osl_t void -+#endif ++#include ++#include ++#include ++#include + -+/* externs */ -+extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx, -+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level); -+extern void dma_detach(di_t *di); -+extern void dma_txreset(di_t *di); -+extern void dma_rxreset(di_t *di); -+extern void dma_txinit(di_t *di); -+extern bool dma_txenabled(di_t *di); -+extern void dma_rxinit(di_t *di); -+extern void dma_rxenable(di_t *di); -+extern bool dma_rxenabled(di_t *di); -+extern void dma_txsuspend(di_t *di); -+extern void dma_txresume(di_t *di); -+extern bool dma_txsuspended(di_t *di); -+extern bool dma_txsuspendedidle(di_t *di); -+extern bool dma_txstopped(di_t *di); -+extern bool dma_rxstopped(di_t *di); -+extern int dma_txfast(di_t *di, void *p, uint32 coreflags); -+extern void dma_fifoloopbackenable(di_t *di); -+extern void *dma_rx(di_t *di); -+extern void dma_rxfill(di_t *di); -+extern void dma_txreclaim(di_t *di, bool forceall); -+extern void dma_rxreclaim(di_t *di); -+extern uintptr dma_getvar(di_t *di, char *name); -+extern void *dma_getnexttxp(di_t *di, bool forceall); -+extern void *dma_peeknexttxp(di_t *di); -+extern void *dma_getnextrxp(di_t *di, bool forceall); -+extern void dma_txblock(di_t *di); -+extern void dma_txunblock(di_t *di); -+extern uint dma_txactive(di_t *di); -+extern void dma_txrotate(di_t *di); -+ -+extern void dma_rxpiomode(dma32regs_t *); -+extern void dma_txpioloopback(dma32regs_t *); -+ -+ -+#endif /* _hnddma_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h ---- linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-12-16 23:39:10.708822000 +0100 -@@ -0,0 +1,16 @@ +/* -+ * Alternate include file for HND sbmips.h since CFE also ships with -+ * a sbmips.h. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * MIPS IRQ Source ++ * -------- ------ ++ * 0 Software (ignored) ++ * 1 Software (ignored) ++ * 2 Combined hardware interrupt (hw0) ++ * 3 Hardware ++ * 4 Hardware ++ * 5 Hardware ++ * 6 Hardware ++ * 7 R4k timer + */ + -+#include "sbmips.h" -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-12-16 23:39:10.708822000 +0100 -@@ -0,0 +1,371 @@ ++ .text ++ .set noreorder ++ .set noat ++ .align 5 ++ NESTED(brcmIRQ, PT_SIZE, sp) ++ SAVE_ALL ++ CLI ++ .set at ++ .set noreorder ++ ++ jal brcm_irq_dispatch ++ move a0, sp ++ ++ j ret_from_irq ++ nop ++ ++ END(brcmIRQ) +diff -urN linux.old/arch/mips/bcm947xx/generic/irq.c linux.dev/arch/mips/bcm947xx/generic/irq.c +--- linux.old/arch/mips/bcm947xx/generic/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/generic/irq.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,130 @@ +/* -+ * Linux OS Independent Layer ++ * Generic interrupt control functions for Broadcom MIPS boards + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -1793,5566 +1886,5272 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.32-brcm/ + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id$ ++ * $Id: irq.c,v 1.1 2005/03/16 13:50:00 wbx Exp $ + */ + -+#ifndef _linux_osl_h_ -+#define _linux_osl_h_ ++#include ++#include ++#include ++#include ++#include ++#include + -+#include ++#include ++#include ++#include + -+/* use current 2.4.x calling conventions */ -+#include ++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) + -+/* assert and panic */ -+#ifdef __GNUC__ -+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) -+#if GCC_VERSION > 30100 -+#define ASSERT(exp) do {} while (0) -+#else -+/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/ -+#define ASSERT(exp) -+#endif -+#endif ++extern asmlinkage void brcmIRQ(void); ++extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs); + -+/* microsecond delay */ -+#define OSL_DELAY(usec) osl_delay(usec) -+extern void osl_delay(uint usec); ++void ++brcm_irq_dispatch(struct pt_regs *regs) ++{ ++ u32 cause; + -+/* PCMCIA attribute space access macros */ -+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+struct pcmcia_dev { -+ dev_link_t link; /* PCMCIA device pointer */ -+ dev_node_t node; /* PCMCIA node structure */ -+ void *base; /* Mapped attribute memory window */ -+ size_t size; /* Size of window */ -+ void *drv; /* Driver data */ -+}; -+#endif -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_read_attr((osh), (offset), (buf), (size)) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_write_attr((osh), (offset), (buf), (size)) -+extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size); -+extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size); -+ -+/* PCI configuration space access macros */ -+#define OSL_PCI_READ_CONFIG(osh, offset, size) \ -+ osl_pci_read_config((osh), (offset), (size)) -+#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ -+ osl_pci_write_config((osh), (offset), (size), (val)) -+extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset); -+extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val); ++ cause = read_c0_cause() & ++ read_c0_status() & ++ CAUSEF_IP; + -+/* PCI device bus # and slot # */ -+#define OSL_PCI_BUS(osh) osl_pci_bus(osh) -+#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) -+extern uint osl_pci_bus(osl_t *osh); -+extern uint osl_pci_slot(osl_t *osh); ++#ifdef CONFIG_KERNPROF ++ change_c0_status(cause | 1, 1); ++#else ++ clear_c0_status(cause); ++#endif + -+/* OSL initialization */ -+extern osl_t *osl_attach(void *pdev); -+extern void osl_detach(osl_t *osh); ++ if (cause & CAUSEF_IP7) ++ do_IRQ(7, regs); ++ if (cause & CAUSEF_IP2) ++ do_IRQ(2, regs); ++ if (cause & CAUSEF_IP3) ++ do_IRQ(3, regs); ++ if (cause & CAUSEF_IP4) ++ do_IRQ(4, regs); ++ if (cause & CAUSEF_IP5) ++ do_IRQ(5, regs); ++ if (cause & CAUSEF_IP6) ++ do_IRQ(6, regs); ++} + -+/* host/bus architecture-specific byte swap */ -+#define BUS_SWAP32(v) (v) ++static void ++enable_brcm_irq(unsigned int irq) ++{ ++ if (irq < 8) ++ set_c0_status(1 << (irq + 8)); ++ else ++ set_c0_status(IE_IRQ0); ++} + -+/* general purpose memory allocation */ ++static void ++disable_brcm_irq(unsigned int irq) ++{ ++ if (irq < 8) ++ clear_c0_status(1 << (irq + 8)); ++ else ++ clear_c0_status(IE_IRQ0); ++} + -+#if defined(BCMDBG_MEM) ++static void ++ack_brcm_irq(unsigned int irq) ++{ ++ /* Already done in brcm_irq_dispatch */ ++} + -+#define MALLOC(osh, size) osl_debug_malloc((osh), (size), __LINE__, __FILE__) -+#define MFREE(osh, addr, size) osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__) -+#define MALLOCED(osh) osl_malloced((osh)) -+#define MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz)) -+extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file); -+extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file); -+extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz); ++static unsigned int ++startup_brcm_irq(unsigned int irq) ++{ ++ enable_brcm_irq(irq); + -+#else ++ return 0; /* never anything pending */ ++} + -+#define MALLOC(osh, size) osl_malloc((osh), (size)) -+#define MFREE(osh, addr, size) osl_mfree((osh), (addr), (size)) -+#define MALLOCED(osh) osl_malloced((osh)) ++static void ++end_brcm_irq(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) ++ enable_brcm_irq(irq); ++} + -+#endif /* BCMDBG_MEM */ ++static struct hw_interrupt_type brcm_irq_type = { ++ typename: "MIPS", ++ startup: startup_brcm_irq, ++ shutdown: disable_brcm_irq, ++ enable: enable_brcm_irq, ++ disable: disable_brcm_irq, ++ ack: ack_brcm_irq, ++ end: end_brcm_irq, ++ NULL ++}; + -+#define MALLOC_FAILED(osh) osl_malloc_failed((osh)) ++void __init ++init_IRQ(void) ++{ ++ int i; + -+extern void *osl_malloc(osl_t *osh, uint size); -+extern void osl_mfree(osl_t *osh, void *addr, uint size); -+extern uint osl_malloced(osl_t *osh); -+extern uint osl_malloc_failed(osl_t *osh); ++ for (i = 0; i < NR_IRQS; i++) { ++ irq_desc[i].status = IRQ_DISABLED; ++ irq_desc[i].action = 0; ++ irq_desc[i].depth = 1; ++ irq_desc[i].handler = &brcm_irq_type; ++ } + -+/* allocate/free shared (dma-able) consistent memory */ -+#define DMA_CONSISTENT_ALIGN PAGE_SIZE -+#define DMA_ALLOC_CONSISTENT(osh, size, pap) \ -+ osl_dma_alloc_consistent((osh), (size), (pap)) -+#define DMA_FREE_CONSISTENT(osh, va, size, pa) \ -+ osl_dma_free_consistent((osh), (void*)(va), (size), (pa)) -+extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap); -+extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa); ++ set_except_vector(0, brcmIRQ); ++ change_c0_status(ST0_IM, ALLINTS); + -+/* map/unmap direction */ -+#define DMA_TX 1 -+#define DMA_RX 2 -+ -+/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(osh, va, size, direction, p) \ -+ osl_dma_map((osh), (va), (size), (direction)) -+#define DMA_UNMAP(osh, pa, size, direction, p) \ -+ osl_dma_unmap((osh), (pa), (size), (direction)) -+extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction); -+extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction); -+ -+/* register access macros */ -+#if defined(BCMJTAG) -+#include -+#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r))) -+#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r))) ++#ifdef CONFIG_REMOTE_DEBUG ++ printk("Breaking into debugger...\n"); ++ set_debug_traps(); ++ breakpoint(); +#endif ++} +diff -urN linux.old/arch/mips/bcm947xx/generic/Makefile linux.dev/arch/mips/bcm947xx/generic/Makefile +--- linux.old/arch/mips/bcm947xx/generic/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/generic/Makefile 2006-10-02 21:26:29.000000000 +0200 +@@ -0,0 +1,12 @@ ++# ++# Makefile for the BCM947xx specific kernel interface routines ++# under Linux. ++# ++EXTRA_CFLAGS += -fno-delayed-branch ++USE_STANDARD_AS_RULE := true ++ ++O_TARGET := brcm.o ++ ++obj-y := int-handler.o irq.o + ++include $(TOPDIR)/Rules.make +diff -urN linux.old/arch/mips/bcm947xx/gpio.c linux.dev/arch/mips/bcm947xx/gpio.c +--- linux.old/arch/mips/bcm947xx/gpio.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/gpio.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,159 @@ +/* -+ * BINOSL selects the slightly slower function-call-based binary compatible osl. -+ * Macros expand to calls to functions defined in linux_osl.c . ++ * GPIO char driver ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ -+#ifndef BINOSL + -+/* string library, kernel mode */ -+#define printf(fmt, args...) printk(fmt, ## args) -+#include -+#include ++#include ++#include ++#include ++#include ++#include + -+/* register access macros */ -+#if !defined(BCMJTAG) -+#ifndef IL_BIGENDIAN -+#define R_REG(r) ( \ -+ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ -+ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ -+ readl((volatile uint32*)(r)) \ -+) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#else /* IL_BIGENDIAN */ -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ -+ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ -+ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#endif -+#endif ++#include ++#include ++#include ++#include ++#include + -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++static sb_t *gpio_sbh; ++static int gpio_major; ++static devfs_handle_t gpio_dir; ++static struct { ++ char *name; ++ devfs_handle_t handle; ++} gpio_file[] = { ++ { "in", NULL }, ++ { "out", NULL }, ++ { "outen", NULL }, ++ { "control", NULL } ++}; + -+/* bcopy, bcmp, and bzero */ -+#define bcopy(src, dst, len) memcpy((dst), (src), (len)) -+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) -+#define bzero(b, len) memset((b), '\0', (len)) ++static int ++gpio_open(struct inode *inode, struct file * file) ++{ ++ if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file)) ++ return -ENODEV; + -+/* uncached virtual address */ -+#ifdef mips -+#define OSL_UNCACHED(va) KSEG1ADDR((va)) -+#include -+#else -+#define OSL_UNCACHED(va) (va) -+#endif ++ MOD_INC_USE_COUNT; ++ return 0; ++} + -+/* get processor cycle count */ -+#if defined(mips) -+#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) -+#elif defined(__i386__) -+#define OSL_GETCYCLES(x) rdtscl((x)) -+#else -+#define OSL_GETCYCLES(x) ((x) = 0) -+#endif ++static int ++gpio_release(struct inode *inode, struct file * file) ++{ ++ MOD_DEC_USE_COUNT; ++ return 0; ++} + -+/* dereference an address that may cause a bus exception */ -+#ifdef mips -+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) -+#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") -+#else -+#define BUSPROBE(val, addr) get_dbe((val), (addr)) -+#include -+#endif -+#else -+#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) -+#endif ++static ssize_t ++gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ u32 val; + -+/* map/unmap physical to virtual I/O */ -+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) -+#define REG_UNMAP(va) iounmap((void *)(va)) ++ switch (MINOR(file->f_dentry->d_inode->i_rdev)) { ++ case 0: ++ val = sb_gpioin(gpio_sbh); ++ break; ++ case 1: ++ val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); ++ break; ++ case 2: ++ val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); ++ break; ++ case 3: ++ val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY); ++ break; ++ default: ++ return -ENODEV; ++ } + -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) memset((r), '\0', (len)) ++ if (put_user(val, (u32 *) buf)) ++ return -EFAULT; + -+/* packet primitives */ -+#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) -+#define PKTFREE(osh, skb, send) osl_pktfree((skb)) -+#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data) -+#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len) -+#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head)) -+#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) -+#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next) -+#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) -+#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) -+#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) -+#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) -+#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) -+#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) -+#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) -+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) -+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) -+#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) -+#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) -+extern void *osl_pktget(osl_t *osh, uint len, bool send); -+extern void osl_pktfree(void *skb); -+ -+#else /* BINOSL */ -+ -+/* string library */ -+#ifndef LINUX_OSL -+#undef printf -+#define printf(fmt, args...) osl_printf((fmt), ## args) -+#undef sprintf -+#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) -+#undef strcmp -+#define strcmp(s1, s2) osl_strcmp((s1), (s2)) -+#undef strncmp -+#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) -+#undef strlen -+#define strlen(s) osl_strlen((s)) -+#undef strcpy -+#define strcpy(d, s) osl_strcpy((d), (s)) -+#undef strncpy -+#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) -+#endif -+extern int osl_printf(const char *format, ...); -+extern int osl_sprintf(char *buf, const char *format, ...); -+extern int osl_strcmp(const char *s1, const char *s2); -+extern int osl_strncmp(const char *s1, const char *s2, uint n); -+extern int osl_strlen(const char *s); -+extern char* osl_strcpy(char *d, const char *s); -+extern char* osl_strncpy(char *d, const char *s, uint n); -+ -+/* register access macros */ -+#if !defined(BCMJTAG) -+#define R_REG(r) ( \ -+ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ -+ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ -+ osl_readl((volatile uint32*)(r)) \ -+) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#endif ++ return sizeof(val); ++} + -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) -+extern uint8 osl_readb(volatile uint8 *r); -+extern uint16 osl_readw(volatile uint16 *r); -+extern uint32 osl_readl(volatile uint32 *r); -+extern void osl_writeb(uint8 v, volatile uint8 *r); -+extern void osl_writew(uint16 v, volatile uint16 *r); -+extern void osl_writel(uint32 v, volatile uint32 *r); ++static ssize_t ++gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos) ++{ ++ u32 val; + -+/* bcopy, bcmp, and bzero */ -+extern void bcopy(const void *src, void *dst, int len); -+extern int bcmp(const void *b1, const void *b2, int len); -+extern void bzero(void *b, int len); ++ if (get_user(val, (u32 *) buf)) ++ return -EFAULT; + -+/* uncached virtual address */ -+#define OSL_UNCACHED(va) osl_uncached((va)) -+extern void *osl_uncached(void *va); ++ switch (MINOR(file->f_dentry->d_inode->i_rdev)) { ++ case 0: ++ return -EACCES; ++ case 1: ++ sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); ++ break; ++ case 2: ++ sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); ++ break; ++ case 3: ++ sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY); ++ break; ++ default: ++ return -ENODEV; ++ } + -+/* get processor cycle count */ -+#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) -+extern uint osl_getcycles(void); ++ return sizeof(val); ++} ++ ++static struct file_operations gpio_fops = { ++ owner: THIS_MODULE, ++ open: gpio_open, ++ release: gpio_release, ++ read: gpio_read, ++ write: gpio_write, ++}; + -+/* dereference an address that may target abort */ -+#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) -+extern int osl_busprobe(uint32 *val, uint32 addr); ++static int __init ++gpio_init(void) ++{ ++ int i; + -+/* map/unmap physical to virtual */ -+#define REG_MAP(pa, size) osl_reg_map((pa), (size)) -+#define REG_UNMAP(va) osl_reg_unmap((va)) -+extern void *osl_reg_map(uint32 pa, uint size); -+extern void osl_reg_unmap(void *va); ++ if (!(gpio_sbh = sb_kattach())) ++ return -ENODEV; + -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) bzero((r), (len)) -+ -+/* packet primitives */ -+#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) -+#define PKTFREE(osh, skb, send) osl_pktfree((skb)) -+#define PKTDATA(osh, skb) osl_pktdata((osh), (skb)) -+#define PKTLEN(osh, skb) osl_pktlen((osh), (skb)) -+#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb)) -+#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb)) -+#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb)) -+#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) -+#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len)) -+#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes)) -+#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes)) -+#define PKTDUP(osh, skb) osl_pktdup((osh), (skb)) -+#define PKTCOOKIE(skb) osl_pktcookie((skb)) -+#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) -+#define PKTLINK(skb) osl_pktlink((skb)) -+#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) -+#define PKTPRIO(skb) osl_pktprio((skb)) -+#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) -+extern void *osl_pktget(osl_t *osh, uint len, bool send); -+extern void osl_pktfree(void *skb); -+extern uchar *osl_pktdata(osl_t *osh, void *skb); -+extern uint osl_pktlen(osl_t *osh, void *skb); -+extern uint osl_pktheadroom(osl_t *osh, void *skb); -+extern uint osl_pkttailroom(osl_t *osh, void *skb); -+extern void *osl_pktnext(osl_t *osh, void *skb); -+extern void osl_pktsetnext(void *skb, void *x); -+extern void osl_pktsetlen(osl_t *osh, void *skb, uint len); -+extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes); -+extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes); -+extern void *osl_pktdup(osl_t *osh, void *skb); -+extern void *osl_pktcookie(void *skb); -+extern void osl_pktsetcookie(void *skb, void *x); -+extern void *osl_pktlink(void *skb); -+extern void osl_pktsetlink(void *skb, void *x); -+extern uint osl_pktprio(void *skb); -+extern void osl_pktsetprio(void *skb, uint x); -+ -+#endif /* BINOSL */ -+ -+#define OSL_ERROR(bcmerror) osl_error(bcmerror) -+extern int osl_error(int bcmerror); -+ -+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ -+#define PKTBUFSZ 2048 -+ -+#endif /* _linux_osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h ---- linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,411 @@ ++ sb_gpiosetcore(gpio_sbh); ++ ++ if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0) ++ return gpio_major; ++ ++ gpio_dir = devfs_mk_dir(NULL, "gpio", NULL); ++ ++ for (i = 0; i < ARRAYSIZE(gpio_file); i++) { ++ gpio_file[i].handle = devfs_register(gpio_dir, ++ gpio_file[i].name, ++ DEVFS_FL_DEFAULT, gpio_major, i, ++ S_IFCHR | S_IRUGO | S_IWUGO, ++ &gpio_fops, NULL); ++ } ++ ++ return 0; ++} ++ ++static void __exit ++gpio_exit(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAYSIZE(gpio_file); i++) ++ devfs_unregister(gpio_file[i].handle); ++ devfs_unregister(gpio_dir); ++ devfs_unregister_chrdev(gpio_major, "gpio"); ++ sb_detach(gpio_sbh); ++} ++ ++module_init(gpio_init); ++module_exit(gpio_exit); +diff -urN linux.old/arch/mips/bcm947xx/hndchipc.c linux.dev/arch/mips/bcm947xx/hndchipc.c +--- linux.old/arch/mips/bcm947xx/hndchipc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/hndchipc.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,158 @@ +/* -+ * Linux-specific abstractions to gain some independence from linux kernel versions. -+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. ++ * BCM47XX support code for some chipcommon (old extif) facilities (uart) + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * ++ * $Id: hndchipc.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ + */ + -+#ifndef _linuxver_h_ -+#define _linuxver_h_ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+#include -+#include ++/* ++ * Returns TRUE if an external UART exists at the given base ++ * register. ++ */ ++static bool ++BCMINITFN(serial_exists)(osl_t *osh, uint8 *regs) ++{ ++ uint8 save_mcr, status1; + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) -+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ -+#ifdef __UNDEF_NO_VERSION__ -+#undef __NO_VERSION__ -+#else -+#define __NO_VERSION__ -+#endif -+#endif ++ save_mcr = R_REG(osh, ®s[UART_MCR]); ++ W_REG(osh, ®s[UART_MCR], UART_MCR_LOOP | 0x0a); ++ status1 = R_REG(osh, ®s[UART_MSR]) & 0xf0; ++ W_REG(osh, ®s[UART_MCR], save_mcr); + -+#if defined(MODULE) && defined(MODVERSIONS) -+#include -+#endif ++ return (status1 == 0x90); ++} + -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -+#include -+#endif ++/* ++ * Initializes UART access. The callback function will be called once ++ * per found UART. ++ */ ++void ++BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, ++ uint reg_shift)) ++{ ++ osl_t *osh; ++ void *regs; ++ ulong base; ++ uint irq; ++ int i, n; + ++ osh = sb_osh(sbh); + -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") -+#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) -+#endif ++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { ++ extifregs_t *eir = (extifregs_t *) regs; ++ sbconfig_t *sb; + -+/* linux/malloc.h is deprecated, use linux/slab.h instead. */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) -+#include -+#else -+#include -+#endif ++ /* Determine external UART register base */ ++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); ++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1))); + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); + -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) -+#include -+#else -+#include -+#ifndef work_struct -+#define work_struct tq_struct -+#endif -+#ifndef INIT_WORK -+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) -+#endif -+#ifndef schedule_work -+#define schedule_work(_work) schedule_task((_work)) -+#endif -+#ifndef flush_scheduled_work -+#define flush_scheduled_work() flush_scheduled_tasks() -+#endif -+#endif ++ /* Disable GPIO interrupt initially */ ++ W_REG(osh, &eir->gpiointpolarity, 0); ++ W_REG(osh, &eir->gpiointmask, 0); + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) -+/* Some distributions have their own 2.6.x compatibility layers */ -+#ifndef IRQ_NONE -+typedef void irqreturn_t; -+#define IRQ_NONE -+#define IRQ_HANDLED -+#define IRQ_RETVAL(x) -+#endif -+#else -+typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); -+#endif ++ /* Search for external UARTs */ ++ n = 2; ++ for (i = 0; i < 2; i++) { ++ regs = (void *) REG_MAP(base + (i * 8), 8); ++ if (serial_exists(osh, regs)) { ++ /* Set GPIO 1 to be the external UART IRQ */ ++ W_REG(osh, &eir->gpiointmask, 2); ++ /* XXXDetermine external UART clock */ ++ if (add) ++ add(regs, irq, 13500000, 0); ++ } ++ } + -+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) ++ /* Add internal UART if enabled */ ++ if (R_REG(osh, &eir->corecontrol) & CC_UE) ++ if (add) ++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); ++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 rev, cap, pll, baud_base, div; + -+#include -+#include -+#include -+#include -+#include -+#include ++ /* Determine core revision and capabilities */ ++ rev = sb_corerev(sbh); ++ cap = R_REG(osh, &cc->capabilities); ++ pll = cap & CAP_PLL_MASK; + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)) -+/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which -+ * does this, but it's not in 2.4 so we do our own for now. */ -+static inline void -+cs_error(client_handle_t handle, int func, int ret) -+{ -+ error_info_t err = { func, ret }; -+ CardServices(ReportError, handle, &err); -+} -+#endif ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); + -+#endif /* CONFIG_PCMCIA */ ++ if (pll == PLL_TYPE1) { ++ /* PLL clock */ ++ baud_base = sb_clock_rate(pll, ++ R_REG(osh, &cc->clockcontrol_n), ++ R_REG(osh, &cc->clockcontrol_m2)); ++ div = 1; ++ } else { ++ /* Fixed ALP clock */ ++ if (rev >= 11 && rev != 15) { ++ baud_base = 20000000; ++ div = 1; ++ /* Set the override bit so we don't divide it */ ++ W_REG(osh, &cc->corecontrol, CC_UARTCLKO); ++ } ++ /* Internal backplane clock */ ++ else if (rev >= 3) { ++ baud_base = sb_clock(sbh); ++ div = 2; /* Minimum divisor */ ++ W_REG(osh, &cc->clkdiv, ++ ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div)); ++ } ++ /* Fixed internal backplane clock */ ++ else { ++ baud_base = 88000000; ++ div = 48; ++ } + -+#ifndef __exit -+#define __exit -+#endif -+#ifndef __devexit -+#define __devexit -+#endif -+#ifndef __devinit -+#define __devinit __init -+#endif -+#ifndef __devinitdata -+#define __devinitdata -+#endif -+#ifndef __devexit_p -+#define __devexit_p(x) x -+#endif ++ /* Clock source depends on strapping if UartClkOverride is unset */ ++ if ((rev > 0) && ++ ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) { ++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { ++ /* Internal divided backplane clock */ ++ baud_base /= div; ++ } else { ++ /* Assume external clock of 1.8432 MHz */ ++ baud_base = 1843200; ++ } ++ } ++ } + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) ++ /* Add internal UARTs */ ++ n = cap & CAP_UARTS_MASK; ++ for (i = 0; i < n; i++) { ++ /* Register offset changed after revision 0 */ ++ if (rev) ++ regs = (void *)((ulong) &cc->uart0data + (i * 256)); ++ else ++ regs = (void *)((ulong) &cc->uart0data + (i * 8)); + -+#define pci_get_drvdata(dev) (dev)->sysdata -+#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) ++ if (add) ++ add(regs, irq, baud_base, 0); ++ } ++ } ++} + +diff -urN linux.old/arch/mips/bcm947xx/include/bcm4710.h linux.dev/arch/mips/bcm947xx/include/bcm4710.h +--- linux.old/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcm4710.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,91 @@ +/* -+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration ++ * BCM4710 address space map and definitions ++ * Think twice before adding to this file, this is not the kitchen sink ++ * These definitions are not guaranteed for all 47xx chips, only the 4710 ++ * ++ * Copyright 2004, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: bcm4710.h,v 1.3 2004/09/27 07:23:30 tallest Exp $ + */ + -+struct pci_device_id { -+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ -+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ -+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ -+ unsigned long driver_data; /* Data private to the driver */ -+}; -+ -+struct pci_driver { -+ struct list_head node; -+ char *name; -+ const struct pci_device_id *id_table; /* NULL if wants all devices */ -+ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ -+ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ -+ void (*suspend)(struct pci_dev *dev); /* Device suspended */ -+ void (*resume)(struct pci_dev *dev); /* Device woken up */ -+}; -+ -+#define MODULE_DEVICE_TABLE(type, name) -+#define PCI_ANY_ID (~0) ++#ifndef _bcm4710_h_ ++#define _bcm4710_h_ + -+/* compatpci.c */ -+#define pci_module_init pci_register_driver -+extern int pci_register_driver(struct pci_driver *drv); -+extern void pci_unregister_driver(struct pci_driver *drv); ++/* Address map */ ++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ ++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ + -+#endif /* PCI registration */ ++/* Core register space */ ++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ ++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ ++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ ++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ ++#define BCM4710_REG_USB 0x18004000 /* USB core registers */ ++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ ++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ ++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ ++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ ++ ++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ ++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ ++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ ++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ ++#define BCM4710_PROG 0x1f800000 /* Programable interface */ ++#define BCM4710_FLASH 0x1fc00000 /* Flash */ ++ ++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) ++ ++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) ++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++ ++#define SBFLAG_PCI 0 ++#define SBFLAG_ENET0 1 ++#define SBFLAG_ILINE20 2 ++#define SBFLAG_CODEC 3 ++#define SBFLAG_USB 4 ++#define SBFLAG_EXTIF 5 ++#define SBFLAG_ENET1 6 + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) -+#ifdef MODULE -+#define module_init(x) int init_module(void) { return x(); } -+#define module_exit(x) void cleanup_module(void) { x(); } ++#ifdef CONFIG_HWSIM ++#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0) +#else -+#define module_init(x) __initcall(x); -+#define module_exit(x) __exitcall(x); -+#endif ++#define BCM4710_TRACE(trval) +#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) -+#define list_for_each(pos, head) \ -+ for (pos = (head)->next; pos != (head); pos = pos->next) -+#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) -+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) -+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) -+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) -+#endif ++/* BCM94702 CPCI -ExtIF used for LocalBus devs */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) -+#define pci_enable_device(dev) do { } while (0) -+#endif ++#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF ++#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000) ++#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000) ++#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR ++#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000) ++#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000) ++#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ ++#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0) + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) -+#define net_device device -+#endif ++#define LED_REG(x) \ ++ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x))) + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) ++/* ++ * Reset function implemented in PLD. Read or write should trigger hard reset ++ */ ++#define SYS_HARD_RESET() \ ++ { for (;;) \ ++ *( (volatile unsigned char *)\ ++ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \ ++ } + ++#endif /* _bcm4710_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmdefs.h linux.dev/arch/mips/bcm947xx/include/bcmdefs.h +--- linux.old/arch/mips/bcm947xx/include/bcmdefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmdefs.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,106 @@ +/* -+ * DMA mapping ++ * Misc system wide definitions + * -+ * See linux/Documentation/DMA-mapping.txt ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $ + */ + -+#ifndef PCI_DMA_TODEVICE -+#define PCI_DMA_TODEVICE 1 -+#define PCI_DMA_FROMDEVICE 2 ++#ifndef _bcmdefs_h_ ++#define _bcmdefs_h_ ++ ++/* ++ * One doesn't need to include this file explicitly, gets included automatically if ++ * typedefs.h is included. ++ */ ++ ++/* Reclaiming text and data : ++ * The following macros specify special linker sections that can be reclaimed ++ * after a system is considered 'up'. ++ */ ++#if defined(__GNUC__) && defined(BCMRECLAIM) ++extern bool bcmreclaimed; ++#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data ++#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn ++#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */ ++#define BCMINITDATA(_data) _data ++#define BCMINITFN(_fn) _fn ++#define bcmreclaimed 0 ++#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */ ++ ++/* Reclaim uninit functions if BCMNODOWN is defined */ ++/* and if they are not already removed by -gc-sections */ ++#ifdef BCMNODOWN ++#define BCMUNINITFN(_fn) BCMINITFN(_fn) ++#else ++#define BCMUNINITFN(_fn) _fn +#endif + -+typedef u32 dma_addr_t; ++#ifdef BCMRECLAIM ++#define CONST ++#else ++#define CONST const ++#endif /* BCMRECLAIM */ + -+/* Pure 2^n version of get_order */ -+static inline int get_order(unsigned long size) -+{ -+ int order; ++/* Compatibility with old-style BCMRECLAIM */ ++#define BCMINIT(_id) _id + -+ size = (size-1) >> (PAGE_SHIFT-1); -+ order = -1; -+ do { -+ size >>= 1; -+ order++; -+ } while (size); -+ return order; -+} + -+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, -+ dma_addr_t *dma_handle) -+{ -+ void *ret; -+ int gfp = GFP_ATOMIC | GFP_DMA; ++/* Put some library data/code into ROM to reduce RAM requirements */ ++#if defined(__GNUC__) && defined(BCMROMOFFLOAD) ++#define BCMROMDATA(_data) __attribute__ ((__section__ (".datarom." #_data))) _data ++#define BCMROMFN(_fn) __attribute__ ((__section__ (".textrom." #_fn))) _fn ++#else ++#define BCMROMDATA(_data) _data ++#define BCMROMFN(_fn) _fn ++#endif + -+ ret = (void *)__get_free_pages(gfp, get_order(size)); ++/* Bus types */ ++#define SB_BUS 0 /* Silicon Backplane */ ++#define PCI_BUS 1 /* PCI target */ ++#define PCMCIA_BUS 2 /* PCMCIA target */ ++#define SDIO_BUS 3 /* SDIO target */ ++#define JTAG_BUS 4 /* JTAG */ ++#define NO_BUS 0xFF /* Bus that does not support R/W REG */ + -+ if (ret != NULL) { -+ memset(ret, 0, size); -+ *dma_handle = virt_to_bus(ret); -+ } -+ return ret; -+} -+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, -+ void *vaddr, dma_addr_t dma_handle) -+{ -+ free_pages((unsigned long)vaddr, get_order(size)); -+} -+#ifdef ILSIM -+extern uint pci_map_single(void *dev, void *va, uint size, int direction); -+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); ++/* Allows optimization for single-bus support */ ++#ifdef BCMBUSTYPE ++#define BUSTYPE(bus) (BCMBUSTYPE) +#else -+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) -+#define pci_unmap_single(cookie, address, size, dir) ++#define BUSTYPE(bus) (bus) +#endif + -+#endif /* DMA mapping */ ++/* Defines for DMA Address Width - Shared between OSL and HNDDMA */ ++#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ ++#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */ ++#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) ++#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */ ++#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */ ++#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */ ++#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */ + -+#define dev_kfree_skb_any(a) dev_kfree_skb(a) -+#define netif_down(dev) do { (dev)->start = 0; } while(0) ++/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF). ++ * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL. ++ * There is a compile time check in wlc.c which ensure that this value is at least as big ++ * as TXOFF. This value is used in dma_rxfill (hnddma.c). ++ */ ++#define BCMEXTRAHDROOM 160 ++ ++/* Headroom required for dongle-to-host communication. Packets allocated ++ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should ++ * leave this much room in front for low-level message headers which may ++ * be needed to get across the dongle bus to the host. (These messages ++ * don't go over the network, so room for the full WL header above would ++ * be a waste.) ++ */ ++#define BCMDONGLEHDRSZ 8 + -+/* pcmcia-cs provides its own netdevice compatibility layer */ -+#ifndef _COMPAT_NETDEVICE_H + ++ ++#endif /* _bcmdefs_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs1.h linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h +--- linux.old/arch/mips/bcm947xx/include/bcmdevs1.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs1.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,391 @@ +/* -+ * SoftNet ++ * Broadcom device-specific manifest constants. + * -+ * For pre-softnet kernels we need to tell the upper layer not to -+ * re-enter start_xmit() while we are in there. However softnet -+ * guarantees not to enter while we are in there so there is no need -+ * to do the netif_stop_queue() dance unless the transmit queue really -+ * gets stuck. This should also improve performance according to tests -+ * done by Aman Singla. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ + */ + -+#define dev_kfree_skb_irq(a) dev_kfree_skb(a) -+#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) -+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) -+ -+static inline void netif_start_queue(struct net_device *dev) -+{ -+ dev->tbusy = 0; -+ dev->interrupt = 0; -+ dev->start = 1; -+} ++#ifndef _BCMDEVS_H ++#define _BCMDEVS_H + -+#define netif_queue_stopped(dev) (dev)->tbusy -+#define netif_running(dev) (dev)->start + -+#endif /* _COMPAT_NETDEVICE_H */ ++/* Known PCI vendor Id's */ ++#define VENDOR_EPIGRAM 0xfeda ++#define VENDOR_BROADCOM 0x14e4 ++#define VENDOR_3COM 0x10b7 ++#define VENDOR_NETGEAR 0x1385 ++#define VENDOR_DIAMOND 0x1092 ++#define VENDOR_DELL 0x1028 ++#define VENDOR_HP 0x0e11 ++#define VENDOR_APPLE 0x106b + -+#define netif_device_attach(dev) netif_start_queue(dev) -+#define netif_device_detach(dev) netif_stop_queue(dev) ++/* PCI Device Id's */ ++#define BCM4210_DEVICE_ID 0x1072 /* never used */ ++#define BCM4211_DEVICE_ID 0x4211 ++#define BCM4230_DEVICE_ID 0x1086 /* never used */ ++#define BCM4231_DEVICE_ID 0x4231 + -+/* 2.4.x renamed bottom halves to tasklets */ -+#define tasklet_struct tq_struct -+static inline void tasklet_schedule(struct tasklet_struct *tasklet) -+{ -+ queue_task(tasklet, &tq_immediate); -+ mark_bh(IMMEDIATE_BH); -+} ++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ ++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ ++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ ++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ + -+static inline void tasklet_init(struct tasklet_struct *tasklet, -+ void (*func)(unsigned long), -+ unsigned long data) -+{ -+ tasklet->next = NULL; -+ tasklet->sync = 0; -+ tasklet->routine = (void (*)(void *))func; -+ tasklet->data = (void *)data; -+} -+#define tasklet_kill(tasklet) {do{} while(0);} ++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ ++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ + -+/* 2.4.x introduced del_timer_sync() */ -+#define del_timer_sync(timer) del_timer(timer) ++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ ++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ + -+#else ++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ ++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ ++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ ++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ ++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ ++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ ++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ ++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ ++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ ++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ + -+#define netif_down(dev) ++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ + -+#endif /* SoftNet */ ++#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ ++#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ ++#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ ++#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ ++#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ ++#define BCM4610_USB_ID 0x4615 /* 4610 usb */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) ++#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ ++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ ++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ + -+/* -+ * Emit code to initialise a tq_struct's routine and data pointers -+ */ -+#define PREPARE_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ (_tq)->routine = _routine; \ -+ (_tq)->data = _data; \ -+ } while (0) ++#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ ++#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ + -+/* -+ * Emit code to initialise all of a tq_struct -+ */ -+#define INIT_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ INIT_LIST_HEAD(&(_tq)->list); \ -+ (_tq)->sync = 0; \ -+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ -+ } while (0) ++#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ ++#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ ++#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ ++#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ + -+#endif ++#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ ++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ ++#define BCM4306_D11G_ID2 0x4325 ++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ ++#define BCM4306_UART_ID 0x4322 /* 4306 uart */ ++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ ++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) ++#define BCM4309_PKG_ID 1 /* 4309 package id */ + -+/* Power management related routines */ ++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ ++#define BCM4303_PKG_ID 2 /* 4303 package id */ + -+static inline int -+pci_save_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_read_config_dword(dev, i * 4,&buffer[i]); -+ } -+ return 0; -+} ++#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ ++#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ ++#define BCM4310_UART_ID 0x4312 /* 4310 uart */ ++#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ ++#define BCM4310_USB_ID 0x4315 /* 4310 usb */ + -+static inline int -+pci_restore_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; ++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ ++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ + -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_write_config_dword(dev,i * 4, buffer[i]); -+ } -+ /* -+ * otherwise, write the context information we know from bootup. -+ * This works around a problem where warm-booting from Windows -+ * combined with a D3(hot)->D0 transition causes PCI config -+ * header data to be forgotten. -+ */ -+ else { -+ for (i = 0; i < 6; i ++) -+ pci_write_config_dword(dev, -+ PCI_BASE_ADDRESS_0 + (i * 4), -+ pci_resource_start(dev, i)); -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ } -+ return 0; -+} + -+#endif /* PCI power management */ ++#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ ++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ + -+/* Old cp0 access macros deprecated in 2.4.19 */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) -+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) -+#endif ++#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ + -+/* Module refcount handled internally in 2.6.x */ -+#ifndef SET_MODULE_OWNER -+#define SET_MODULE_OWNER(dev) do {} while (0) -+#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT -+#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT -+#else -+#define OLD_MOD_INC_USE_COUNT do {} while (0) -+#define OLD_MOD_DEC_USE_COUNT do {} while (0) -+#endif ++#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */ ++#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */ ++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */ ++#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */ + -+#ifndef SET_NETDEV_DEV -+#define SET_NETDEV_DEV(net, pdev) do {} while (0) -+#endif ++#define FPGA_JTAGM_ID 0x4330 /* ??? */ + -+#ifndef HAVE_FREE_NETDEV -+#define free_netdev(dev) kfree(dev) -+#endif ++/* Address map */ ++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ ++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) -+/* struct packet_type redefined in 2.6.x */ -+#define af_packet_priv data -+#endif ++/* Core register space */ ++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ ++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ ++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ ++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ ++#define BCM4710_REG_USB 0x18004000 /* USB core registers */ ++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ ++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ ++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ ++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ + -+#endif /* _linuxver_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h ---- linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,552 @@ -+/* -+ * HND Run Time Environment for standalone MIPS programs. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ ++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ ++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ ++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ ++#define BCM4710_PROG 0x1f800000 /* Programable interface */ ++#define BCM4710_FLASH 0x1fc00000 /* Flash */ + -+#ifndef _MISPINC_H -+#define _MISPINC_H ++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + ++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) + -+/* MIPS defines */ ++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) ++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) + -+#ifdef _LANGUAGE_ASSEMBLY ++#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ ++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ ++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ ++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ + -+/* -+ * Symbolic register names for 32 bit ABI -+ */ -+#define zero $0 /* wired zero */ -+#define AT $1 /* assembler temp - uppercase because of ".set at" */ -+#define v0 $2 /* return value */ -+#define v1 $3 -+#define a0 $4 /* argument registers */ -+#define a1 $5 -+#define a2 $6 -+#define a3 $7 -+#define t0 $8 /* caller saved */ -+#define t1 $9 -+#define t2 $10 -+#define t3 $11 -+#define t4 $12 -+#define t5 $13 -+#define t6 $14 -+#define t7 $15 -+#define s0 $16 /* callee saved */ -+#define s1 $17 -+#define s2 $18 -+#define s3 $19 -+#define s4 $20 -+#define s5 $21 -+#define s6 $22 -+#define s7 $23 -+#define t8 $24 /* caller saved */ -+#define t9 $25 -+#define jp $25 /* PIC jump register */ -+#define k0 $26 /* kernel scratch */ -+#define k1 $27 -+#define gp $28 /* global pointer */ -+#define sp $29 /* stack pointer */ -+#define fp $30 /* frame pointer */ -+#define s8 $30 /* same like fp! */ -+#define ra $31 /* return address */ ++#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ + ++#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ ++#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */ ++#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */ + -+/* -+ * CP0 Registers -+ */ ++#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */ + -+#define C0_INX $0 -+#define C0_RAND $1 -+#define C0_TLBLO0 $2 -+#define C0_TLBLO C0_TLBLO0 -+#define C0_TLBLO1 $3 -+#define C0_CTEXT $4 -+#define C0_PGMASK $5 -+#define C0_WIRED $6 -+#define C0_BADVADDR $8 -+#define C0_COUNT $9 -+#define C0_TLBHI $10 -+#define C0_COMPARE $11 -+#define C0_SR $12 -+#define C0_STATUS C0_SR -+#define C0_CAUSE $13 -+#define C0_EPC $14 -+#define C0_PRID $15 -+#define C0_CONFIG $16 -+#define C0_LLADDR $17 -+#define C0_WATCHLO $18 -+#define C0_WATCHHI $19 -+#define C0_XCTEXT $20 -+#define C0_DIAGNOSTIC $22 -+#define C0_BROADCOM C0_DIAGNOSTIC -+#define C0_PERFORMANCE $25 -+#define C0_ECC $26 -+#define C0_CACHEERR $27 -+#define C0_TAGLO $28 -+#define C0_TAGHI $29 -+#define C0_ERREPC $30 -+#define C0_DESAVE $31 ++/* PCMCIA vendor Id's */ + -+/* -+ * LEAF - declare leaf routine -+ */ -+#define LEAF(symbol) \ -+ .globl symbol; \ -+ .align 2; \ -+ .type symbol,@function; \ -+ .ent symbol,0; \ -+symbol: .frame sp,0,ra ++#define VENDOR_BROADCOM_PCMCIA 0x02d0 + -+/* -+ * END - mark end of function -+ */ -+#define END(function) \ -+ .end function; \ -+ .size function,.-function ++/* SDIO vendor Id's */ ++#define VENDOR_BROADCOM_SDIO 0x00BF + -+#define _ULCAST_ + -+#else ++/* boardflags */ ++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ ++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ ++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ ++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ ++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ ++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ ++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ ++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ ++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ ++#define BFL_FEM 0x0800 /* This board supports the Front End Module */ ++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ ++#define BFL_HGPA 0x2000 /* This board has a high gain PA */ ++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ ++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ + -+/* -+ * The following macros are especially useful for __asm__ -+ * inline assembler. -+ */ -+#ifndef __STR -+#define __STR(x) #x -+#endif -+#ifndef STR -+#define STR(x) __STR(x) -+#endif ++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ ++#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ ++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ ++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ ++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ ++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ ++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ ++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ ++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ ++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ ++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + -+#define _ULCAST_ (unsigned long) ++/* Bus types */ ++#define SB_BUS 0 /* Silicon Backplane */ ++#define PCI_BUS 1 /* PCI target */ ++#define PCMCIA_BUS 2 /* PCMCIA target */ ++#define SDIO_BUS 3 /* SDIO target */ ++#define JTAG_BUS 4 /* JTAG */ + ++/* Allows optimization for single-bus support */ ++#ifdef BCMBUSTYPE ++#define BUSTYPE(bus) (BCMBUSTYPE) ++#else ++#define BUSTYPE(bus) (bus) ++#endif + -+/* -+ * CP0 Registers -+ */ ++/* power control defines */ ++#define PLL_DELAY 150 /* us pll on delay */ ++#define FREF_DELAY 200 /* us fref change delay */ ++#define MIN_SLOW_CLK 32 /* us Slow clock period */ ++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ + -+#define C0_INX 0 /* CP0: TLB Index */ -+#define C0_RAND 1 /* CP0: TLB Random */ -+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ -+#define C0_CTEXT 4 /* CP0: Context */ -+#define C0_PGMASK 5 /* CP0: TLB PageMask */ -+#define C0_WIRED 6 /* CP0: TLB Wired */ -+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ -+#define C0_COUNT 9 /* CP0: Count */ -+#define C0_TLBHI 10 /* CP0: TLB EntryHi */ -+#define C0_COMPARE 11 /* CP0: Compare */ -+#define C0_SR 12 /* CP0: Processor Status */ -+#define C0_STATUS C0_SR /* CP0: Processor Status */ -+#define C0_CAUSE 13 /* CP0: Exception Cause */ -+#define C0_EPC 14 /* CP0: Exception PC */ -+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ -+#define C0_CONFIG 16 /* CP0: Config */ -+#define C0_LLADDR 17 /* CP0: LLAddr */ -+#define C0_WATCHLO 18 /* CP0: WatchpointLo */ -+#define C0_WATCHHI 19 /* CP0: WatchpointHi */ -+#define C0_XCTEXT 20 /* CP0: XContext */ -+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ -+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ -+#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ -+#define C0_ECC 26 /* CP0: ECC */ -+#define C0_CACHEERR 27 /* CP0: CacheErr */ -+#define C0_TAGLO 28 /* CP0: TagLo */ -+#define C0_TAGHI 29 /* CP0: TagHi */ -+#define C0_ERREPC 30 /* CP0: ErrorEPC */ -+#define C0_DESAVE 31 /* CP0: DebugSave */ ++/* Reference Board Types */ + -+#endif /* _LANGUAGE_ASSEMBLY */ ++#define BU4710_BOARD 0x0400 ++#define VSIM4710_BOARD 0x0401 ++#define QT4710_BOARD 0x0402 + -+/* -+ * Memory segments (32bit kernel mode addresses) -+ */ -+#undef KUSEG -+#undef KSEG0 -+#undef KSEG1 -+#undef KSEG2 -+#undef KSEG3 -+#define KUSEG 0x00000000 -+#define KSEG0 0x80000000 -+#define KSEG1 0xa0000000 -+#define KSEG2 0xc0000000 -+#define KSEG3 0xe0000000 -+#define PHYSADDR_MASK 0x1fffffff ++#define BU4610_BOARD 0x0403 ++#define VSIM4610_BOARD 0x0404 + -+/* -+ * Map an address to a certain kernel segment -+ */ -+#undef PHYSADDR -+#undef KSEG0ADDR -+#undef KSEG1ADDR -+#undef KSEG2ADDR -+#undef KSEG3ADDR ++#define BU4307_BOARD 0x0405 ++#define BCM94301CB_BOARD 0x0406 ++#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ ++#define BCM94301MP_BOARD 0x0407 ++#define BCM94307MP_BOARD 0x0408 ++#define BCMAP4307_BOARD 0x0409 + -+#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) -+#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) -+#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) -+#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) -+#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) ++#define BU4309_BOARD 0x040a ++#define BCM94309CB_BOARD 0x040b ++#define BCM94309MP_BOARD 0x040c ++#define BCM4309AP_BOARD 0x040d + ++#define BCM94302MP_BOARD 0x040e + -+#ifndef Index_Invalidate_I -+/* -+ * Cache Operations -+ */ -+#define Index_Invalidate_I 0x00 -+#define Index_Writeback_Inv_D 0x01 -+#define Index_Invalidate_SI 0x02 -+#define Index_Writeback_Inv_SD 0x03 -+#define Index_Load_Tag_I 0x04 -+#define Index_Load_Tag_D 0x05 -+#define Index_Load_Tag_SI 0x06 -+#define Index_Load_Tag_SD 0x07 -+#define Index_Store_Tag_I 0x08 -+#define Index_Store_Tag_D 0x09 -+#define Index_Store_Tag_SI 0x0A -+#define Index_Store_Tag_SD 0x0B -+#define Create_Dirty_Excl_D 0x0d -+#define Create_Dirty_Excl_SD 0x0f -+#define Hit_Invalidate_I 0x10 -+#define Hit_Invalidate_D 0x11 -+#define Hit_Invalidate_SI 0x12 -+#define Hit_Invalidate_SD 0x13 -+#define Fill_I 0x14 -+#define Hit_Writeback_Inv_D 0x15 -+ /* 0x16 is unused */ -+#define Hit_Writeback_Inv_SD 0x17 -+#define R5K_Page_Invalidate_S 0x17 -+#define Hit_Writeback_I 0x18 -+#define Hit_Writeback_D 0x19 -+ /* 0x1a is unused */ -+#define Hit_Writeback_SD 0x1b -+ /* 0x1c is unused */ -+ /* 0x1e is unused */ -+#define Hit_Set_Virtual_SI 0x1e -+#define Hit_Set_Virtual_SD 0x1f -+#endif ++#define VSIM4310_BOARD 0x040f ++#define BU4711_BOARD 0x0410 ++#define BCM94310U_BOARD 0x0411 ++#define BCM94310AP_BOARD 0x0412 ++#define BCM94310MP_BOARD 0x0414 + ++#define BU4306_BOARD 0x0416 ++#define BCM94306CB_BOARD 0x0417 ++#define BCM94306MP_BOARD 0x0418 + -+/* -+ * R4x00 interrupt enable / cause bits -+ */ -+#define IE_SW0 (_ULCAST_(1) << 8) -+#define IE_SW1 (_ULCAST_(1) << 9) -+#define IE_IRQ0 (_ULCAST_(1) << 10) -+#define IE_IRQ1 (_ULCAST_(1) << 11) -+#define IE_IRQ2 (_ULCAST_(1) << 12) -+#define IE_IRQ3 (_ULCAST_(1) << 13) -+#define IE_IRQ4 (_ULCAST_(1) << 14) -+#define IE_IRQ5 (_ULCAST_(1) << 15) ++#define BCM94710D_BOARD 0x041a ++#define BCM94710R1_BOARD 0x041b ++#define BCM94710R4_BOARD 0x041c ++#define BCM94710AP_BOARD 0x041d + -+#ifndef ST0_UM -+/* -+ * Bitfields in the mips32 cp0 status register -+ */ -+#define ST0_IE 0x00000001 -+#define ST0_EXL 0x00000002 -+#define ST0_ERL 0x00000004 -+#define ST0_UM 0x00000010 -+#define ST0_SWINT0 0x00000100 -+#define ST0_SWINT1 0x00000200 -+#define ST0_HWINT0 0x00000400 -+#define ST0_HWINT1 0x00000800 -+#define ST0_HWINT2 0x00001000 -+#define ST0_HWINT3 0x00002000 -+#define ST0_HWINT4 0x00004000 -+#define ST0_HWINT5 0x00008000 -+#define ST0_IM 0x0000ff00 -+#define ST0_NMI 0x00080000 -+#define ST0_SR 0x00100000 -+#define ST0_TS 0x00200000 -+#define ST0_BEV 0x00400000 -+#define ST0_RE 0x02000000 -+#define ST0_RP 0x08000000 -+#define ST0_CU 0xf0000000 -+#define ST0_CU0 0x10000000 -+#define ST0_CU1 0x20000000 -+#define ST0_CU2 0x40000000 -+#define ST0_CU3 0x80000000 -+#endif + ++#define BU2050_BOARD 0x041f + -+/* -+ * Bitfields in the mips32 cp0 cause register -+ */ -+#define C_EXC 0x0000007c -+#define C_EXC_SHIFT 2 -+#define C_INT 0x0000ff00 -+#define C_INT_SHIFT 8 -+#define C_SW0 (_ULCAST_(1) << 8) -+#define C_SW1 (_ULCAST_(1) << 9) -+#define C_IRQ0 (_ULCAST_(1) << 10) -+#define C_IRQ1 (_ULCAST_(1) << 11) -+#define C_IRQ2 (_ULCAST_(1) << 12) -+#define C_IRQ3 (_ULCAST_(1) << 13) -+#define C_IRQ4 (_ULCAST_(1) << 14) -+#define C_IRQ5 (_ULCAST_(1) << 15) -+#define C_WP 0x00400000 -+#define C_IV 0x00800000 -+#define C_CE 0x30000000 -+#define C_CE_SHIFT 28 -+#define C_BD 0x80000000 + -+/* Values in C_EXC */ -+#define EXC_INT 0 -+#define EXC_TLBM 1 -+#define EXC_TLBL 2 -+#define EXC_TLBS 3 -+#define EXC_AEL 4 -+#define EXC_AES 5 -+#define EXC_IBE 6 -+#define EXC_DBE 7 -+#define EXC_SYS 8 -+#define EXC_BPT 9 -+#define EXC_RI 10 -+#define EXC_CU 11 -+#define EXC_OV 12 -+#define EXC_TR 13 -+#define EXC_WATCH 23 -+#define EXC_MCHK 24 ++#define BCM94309G_BOARD 0x0421 + ++#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ + -+/* -+ * Bits in the cp0 config register. -+ */ -+#define CONF_CM_CACHABLE_NO_WA 0 -+#define CONF_CM_CACHABLE_WA 1 -+#define CONF_CM_UNCACHED 2 -+#define CONF_CM_CACHABLE_NONCOHERENT 3 -+#define CONF_CM_CACHABLE_CE 4 -+#define CONF_CM_CACHABLE_COW 5 -+#define CONF_CM_CACHABLE_CUW 6 -+#define CONF_CM_CACHABLE_ACCELERATED 7 -+#define CONF_CM_CMASK 7 -+#define CONF_CU (_ULCAST_(1) << 3) -+#define CONF_DB (_ULCAST_(1) << 4) -+#define CONF_IB (_ULCAST_(1) << 5) -+#define CONF_SE (_ULCAST_(1) << 12) -+#define CONF_SC (_ULCAST_(1) << 17) -+#define CONF_AC (_ULCAST_(1) << 23) -+#define CONF_HALT (_ULCAST_(1) << 25) ++#define BU4704_BOARD 0x0423 ++#define BU4702_BOARD 0x0424 + ++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ + -+/* -+ * Bits in the cp0 config register select 1. -+ */ -+#define CONF1_FP 0x00000001 /* FPU present */ -+#define CONF1_EP 0x00000002 /* EJTAG present */ -+#define CONF1_CA 0x00000004 /* mips16 implemented */ -+#define CONF1_WR 0x00000008 /* Watch registers present */ -+#define CONF1_PC 0x00000010 /* Performance counters present */ -+#define CONF1_DA_SHIFT 7 /* D$ associativity */ -+#define CONF1_DA_MASK 0x00000380 -+#define CONF1_DA_BASE 1 -+#define CONF1_DL_SHIFT 10 /* D$ line size */ -+#define CONF1_DL_MASK 0x00001c00 -+#define CONF1_DL_BASE 2 -+#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -+#define CONF1_DS_MASK 0x0000e000 -+#define CONF1_DS_BASE 64 -+#define CONF1_IA_SHIFT 16 /* I$ associativity */ -+#define CONF1_IA_MASK 0x00070000 -+#define CONF1_IA_BASE 1 -+#define CONF1_IL_SHIFT 19 /* I$ line size */ -+#define CONF1_IL_MASK 0x00380000 -+#define CONF1_IL_BASE 2 -+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -+#define CONF1_IS_MASK 0x01c00000 -+#define CONF1_IS_BASE 64 -+#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ -+#define CONF1_MS_SHIFT 25 ++#define BU4317_BOARD 0x0426 + -+/* PRID register */ -+#define PRID_COPT_MASK 0xff000000 -+#define PRID_COMP_MASK 0x00ff0000 -+#define PRID_IMP_MASK 0x0000ff00 -+#define PRID_REV_MASK 0x000000ff + -+#define PRID_COMP_LEGACY 0x000000 -+#define PRID_COMP_MIPS 0x010000 -+#define PRID_COMP_BROADCOM 0x020000 -+#define PRID_COMP_ALCHEMY 0x030000 -+#define PRID_COMP_SIBYTE 0x040000 -+#define PRID_IMP_BCM4710 0x4000 -+#define PRID_IMP_BCM3302 0x9000 -+#define PRID_IMP_BCM3303 0x9100 ++#define BCM94702MN_BOARD 0x0428 + -+#define PRID_IMP_UNKNOWN 0xff00 ++/* BCM4702 1U CompactPCI Board */ ++#define BCM94702CPCI_BOARD 0x0429 + -+#define BCM330X(id) \ -+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ -+ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) ++/* BCM4702 with BCM95380 VLAN Router */ ++#define BCM95380RR_BOARD 0x042a + -+/* Bits in C0_BROADCOM */ -+#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ -+#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ -+#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ -+#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ ++/* cb4306 with SiGe PA */ ++#define BCM94306CBSG_BOARD 0x042b + -+/* PreFetch Cache aka Read Ahead Cache */ ++/* mp4301 with 2050 radio */ ++#define BCM94301MPL_BOARD 0x042c + -+#define PFC_CR0 0xff400000 /* control reg 0 */ -+#define PFC_CR1 0xff400004 /* control reg 1 */ ++/* cb4306 with SiGe PA */ ++#define PCSG94306_BOARD 0x042d + -+/* PFC operations */ -+#define PFC_I 0x00000001 /* Enable PFC use for instructions */ -+#define PFC_D 0x00000002 /* Enable PFC use for data */ -+#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ -+#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ -+#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ -+#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ -+#define PFC_DPF 0x00000040 /* Enable directional prefetching */ -+#define PFC_FLUSH 0x00000100 /* Flush the PFC */ -+#define PFC_BRR 0x40000000 /* Bus error indication */ -+#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ ++/* bu4704 with sdram */ ++#define BU4704SD_BOARD 0x042e + -+/* Handy defaults */ -+#define PFC_DISABLED 0 -+#define PFC_AUTO 0xffffffff /* auto select the default mode */ -+#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) -+#define PFC_INST_NOPF (PFC_I | PFC_CINV) -+#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) -+#define PFC_DATA_NOPF (PFC_D | PFC_CINV) -+#define PFC_I_AND_D (PFC_INST | PFC_DATA) -+#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) ++/* Dual 11a/11g Router */ ++#define BCM94704AGR_BOARD 0x042f + ++/* 11a-only minipci */ ++#define BCM94308MP_BOARD 0x0430 + -+/* -+ * These are the UART port assignments, expressed as offsets from the base -+ * register. These assignments should hold for any serial port based on -+ * a 8250, 16450, or 16550(A). -+ */ + -+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ -+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ -+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ -+#define UART_LCR 3 /* Out: Line Control Register */ -+#define UART_MCR 4 /* Out: Modem Control Register */ -+#define UART_LSR 5 /* In: Line Status Register */ -+#define UART_MSR 6 /* In: Modem Status Register */ -+#define UART_SCR 7 /* I/O: Scratch Register */ -+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ -+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -+#define UART_LSR_RXRDY 0x01 /* Receiver ready */ + ++/* BCM94317 boards */ ++#define BCM94317CB_BOARD 0x0440 ++#define BCM94317MP_BOARD 0x0441 ++#define BCM94317PCMCIA_BOARD 0x0442 ++#define BCM94317SDIO_BOARD 0x0443 + -+#ifndef _LANGUAGE_ASSEMBLY ++#define BU4712_BOARD 0x0444 ++#define BU4712SD_BOARD 0x045d ++#define BU4712L_BOARD 0x045f + -+/* -+ * Macros to access the system control coprocessor -+ */ ++/* BCM4712 boards */ ++#define BCM94712AP_BOARD 0x0445 ++#define BCM94712P_BOARD 0x0446 + -+#define MFC0(source, sel) \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ -+ "move\t%0,$1\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ :"=r" (__res) \ -+ : \ -+ :"$1"); \ -+ __res; \ -+}) ++/* BCM4318 boards */ ++#define BU4318_BOARD 0x0447 ++#define CB4318_BOARD 0x0448 ++#define MPG4318_BOARD 0x0449 ++#define MP4318_BOARD 0x044a ++#define SD4318_BOARD 0x044b + -+#define MTC0(source, sel, value) \ -+do { \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ "move\t$1,%z0\n\t" \ -+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ : \ -+ :"jr" (value) \ -+ :"$1"); \ -+} while (0) ++/* BCM63XX boards */ ++#define BCM96338_BOARD 0x6338 ++#define BCM96345_BOARD 0x6345 ++#define BCM96348_BOARD 0x6348 + -+#define get_c0_count() \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ "mfc0\t%0,$9\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ :"=r" (__res)); \ -+ __res; \ -+}) ++/* Another mp4306 with SiGe */ ++#define BCM94306P_BOARD 0x044c + -+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) -+{ -+ uint lsz, sets, ways; ++/* CF-like 4317 modules */ ++#define BCM94317CF_BOARD 0x044d + -+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) -+ lsz = CONF1_IL_BASE << lsz; -+ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); -+ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); -+ *size = lsz * sets * ways; -+ *lsize = lsz; -+} ++/* mp4303 */ ++#define BCM94303MP_BOARD 0x044e + -+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) -+{ -+ uint lsz, sets, ways; ++/* mpsgh4306 */ ++#define BCM94306MPSGH_BOARD 0x044f + -+ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) -+ lsz = CONF1_DL_BASE << lsz; -+ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); -+ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); -+ *size = lsz * sets * ways; -+ *lsize = lsz; -+} ++/* BRCM 4306 w/ Front End Modules */ ++#define BCM94306MPM 0x0450 ++#define BCM94306MPL 0x0453 + -+#define cache_op(base, op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, (%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); ++/* 4712agr */ ++#define BCM94712AGR_BOARD 0x0451 + -+#define cache_unroll4(base, delta, op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1,0(%0); \ -+ cache %1,delta(%0); \ -+ cache %1,(2 * delta)(%0); \ -+ cache %1,(3 * delta)(%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); ++/* The real CF 4317 board */ ++#define CFI4317_BOARD 0x0452 + -+#endif /* !_LANGUAGE_ASSEMBLY */ ++/* pcmcia 4303 */ ++#define PC4303_BOARD 0x0454 + -+#endif /* _MISPINC_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,42 @@ -+/* -+ * OS Abstraction Layer -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ ++/* 5350K */ ++#define BCM95350K_BOARD 0x0455 + -+#ifndef _osl_h_ -+#define _osl_h_ ++/* 5350R */ ++#define BCM95350R_BOARD 0x0456 + -+/* osl handle type forward declaration */ -+typedef struct os_handle osl_t; ++/* 4306mplna */ ++#define BCM94306MPLNA_BOARD 0x0457 + -+#if defined(linux) -+#include -+#elif defined(NDIS) -+#include -+#elif defined(_CFE_) -+#include -+#elif defined(_HNDRTE_) -+#include -+#elif defined(_MINOSL_) -+#include -+#elif PMON -+#include -+#elif defined(MACOSX) -+#include -+#else -+#error "Unsupported OSL requested" -+#endif ++/* 4320 boards */ ++#define BU4320_BOARD 0x0458 ++#define BU4320S_BOARD 0x0459 ++#define BCM94320PH_BOARD 0x045a ++ ++/* 4306mph */ ++#define BCM94306MPH_BOARD 0x045b ++ ++/* 4306pciv */ ++#define BCM94306PCIV_BOARD 0x045c ++ ++#define BU4712SD_BOARD 0x045d ++ ++#define BCM94320PFLSH_BOARD 0x045e ++ ++#define BU4712L_BOARD 0x045f ++#define BCM94712LGR_BOARD 0x0460 ++#define BCM94320R_BOARD 0x0461 ++ ++#define BU5352_BOARD 0x0462 + -+/* handy */ -+#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) -+#define MAXPRIO 7 /* 0-7 */ ++#define BCM94318MPGH_BOARD 0x0463 ++ ++ ++#define BCM95352GR_BOARD 0x0467 ++ ++/* bcm95351agr */ ++#define BCM95351AGR_BOARD 0x0470 ++ ++/* # of GPIO pins */ ++#define GPIO_NUMPINS 16 + -+#endif /* _osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h ---- linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-12-16 23:39:10.752824750 +0100 -@@ -0,0 +1,451 @@ ++#endif /* _BCMDEVS_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h +--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,369 @@ +/* -+ * pcicfg.h: PCI configuration constants and structures. ++ * Broadcom device-specific manifest constants. + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * $Id: bcmdevs.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $ + */ + -+#ifndef _h_pci_ -+#define _h_pci_ ++#ifndef _BCMDEVS_H ++#define _BCMDEVS_H + -+/* The following inside ifndef's so we don't collide with NTDDK.H */ -+#ifndef PCI_MAX_BUS -+#define PCI_MAX_BUS 0x100 -+#endif -+#ifndef PCI_MAX_DEVICES -+#define PCI_MAX_DEVICES 0x20 -+#endif -+#ifndef PCI_MAX_FUNCTION -+#define PCI_MAX_FUNCTION 0x8 -+#endif ++#include "bcm4710.h" + -+#ifndef PCI_INVALID_VENDORID -+#define PCI_INVALID_VENDORID 0xffff -+#endif -+#ifndef PCI_INVALID_DEVICEID -+#define PCI_INVALID_DEVICEID 0xffff -+#endif ++/* Known PCI vendor Id's */ ++#define VENDOR_EPIGRAM 0xfeda ++#define VENDOR_BROADCOM 0x14e4 ++#define VENDOR_3COM 0x10b7 ++#define VENDOR_NETGEAR 0x1385 ++#define VENDOR_DIAMOND 0x1092 ++#define VENDOR_DELL 0x1028 ++#define VENDOR_HP 0x0e11 ++#define VENDOR_APPLE 0x106b + ++/* PCI Device Id's */ ++#define BCM4210_DEVICE_ID 0x1072 /* never used */ ++#define BCM4211_DEVICE_ID 0x4211 ++#define BCM4230_DEVICE_ID 0x1086 /* never used */ ++#define BCM4231_DEVICE_ID 0x4231 + -+/* Convert between bus-slot-function-register and config addresses */ ++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ ++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ ++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ ++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ + -+#define PCICFG_BUS_SHIFT 16 /* Bus shift */ -+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ -+#define PCICFG_FUN_SHIFT 8 /* Function shift */ -+#define PCICFG_OFF_SHIFT 0 /* Register shift */ ++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ ++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ + -+#define PCICFG_BUS_MASK 0xff /* Bus mask */ -+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ -+#define PCICFG_FUN_MASK 7 /* Function mask */ -+#define PCICFG_OFF_MASK 0xff /* Bus mask */ ++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ ++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ + -+#define PCI_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ -+ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ -+ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ -+ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) ++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ ++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ ++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ ++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ ++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ ++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ ++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ ++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ ++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ ++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ ++#define BCM47XX_ATA100_ID 0x471d /* 47xx parallel ATA */ ++#define BCM47XX_SATAXOR_ID 0x471e /* 47xx serial ATA & XOR DMA */ ++#define BCM47XX_GIGETH_ID 0x471f /* 47xx GbE (5700) */ + -+#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) -+#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) -+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) -+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) ++#define BCM47XX_SMBUS_EMU_ID 0x47fe /* 47xx emulated SMBus device */ ++#define BCM47XX_XOR_EMU_ID 0x47ff /* 47xx emulated XOR engine */ + -+/* PCIE Config space accessing MACROS*/ ++#define BCM4710_CHIP_ID 0x4710 /* 4710 chipid returned by sb_chip() */ ++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ + -+#define PCIECFG_BUS_SHIFT 24 /* Bus shift */ -+#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */ -+#define PCIECFG_FUN_SHIFT 16 /* Function shift */ -+#define PCIECFG_OFF_SHIFT 0 /* Register shift */ ++#define BCM4402_CHIP_ID 0x4402 /* 4402 chipid */ ++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ ++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ + -+#define PCIECFG_BUS_MASK 0xff /* Bus mask */ -+#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */ -+#define PCIECFG_FUN_MASK 7 /* Function mask */ -+#define PCIECFG_OFF_MASK 0x3ff /* Register mask */ ++#define BCM4306_CHIP_ID 0x4306 /* 4306 chipcommon chipid */ ++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ ++#define BCM4306_D11G_ID2 0x4325 ++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ ++#define BCM4306_UART_ID 0x4322 /* 4306 uart */ ++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ ++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ + -+#define PCIE_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \ -+ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \ -+ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \ -+ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT)) ++#define BCM4309_PKG_ID 1 /* 4309 package id */ + -+#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK) -+#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK) -+#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK) -+#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK) ++#define BCM4311_CHIP_ID 0x4311 /* 4311 PCIe 802.11a/b/g */ ++#define BCM4311_D11G_ID 0x4311 /* 4311 802.11b/g id */ ++#define BCM4311_D11DUAL_ID 0x4312 /* 4311 802.11a/b/g id */ ++#define BCM4311_D11A_ID 0x4313 /* 4311 802.11a id */ + -+ -+/* The actual config space */ ++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ ++#define BCM4303_PKG_ID 2 /* 4303 package id */ + -+#define PCI_BAR_MAX 6 ++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ ++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ + -+#define PCI_ROM_BAR 8 ++#define BCM4704_CHIP_ID 0x4704 /* 4704 chipcommon chipid */ ++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ + -+#define PCR_RSVDA_MAX 2 ++#define BCM4318_CHIP_ID 0x4318 /* 4318 chip common chipid */ ++#define BCM4318_D11G_ID 0x4318 /* 4318 802.11b/g id */ ++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 802.11a/b/g id */ ++#define BCM4318_D11A_ID 0x431a /* 4318 802.11a id */ + -+/* pci config status reg has a bit to indicate that capability ptr is present*/ ++#define BCM4321_CHIP_ID 0x4321 /* 4321 chip common chipid */ ++#define BCM4321_D11N_ID 0x4328 /* 4321 802.11n dualband id */ ++#define BCM4321_D11N2G_ID 0x4329 /* 4321 802.11n 2.4Hgz band id */ ++#define BCM4321_D11N5G_ID 0x432a /* 4321 802.11n 5Ghz band id */ + -+#define PCI_CAPPTR_PRESENT 0x0010 ++#define BCM4331_CHIP_ID 0x4331 /* 4331 chip common chipid */ ++#define BCM4331_D11N2G_ID 0x4330 /* 4331 802.11n 2.4Ghz band id */ ++#define BCM4331_D11N_ID 0x4331 /* 4331 802.11n dualband id */ ++#define BCM4331_D11N5G_ID 0x4332 /* 4331 802.11n 5Ghz band id */ + -+typedef struct _pci_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long base[PCI_BAR_MAX]; -+ unsigned long cardbus_cis; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long baserom; -+ unsigned long rsvd_a[PCR_RSVDA_MAX]; -+ unsigned char int_line; -+ unsigned char int_pin; -+ unsigned char min_gnt; -+ unsigned char max_lat; -+ unsigned char dev_dep[192]; -+} pci_config_regs; ++#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */ ++#define HDLSIM_PKG_ID 14 /* HDL simulator package id */ ++#define HWSIM_PKG_ID 15 /* Hardware simulator package id */ + -+#define SZPCR (sizeof (pci_config_regs)) -+#define MINSZPCR 64 /* offsetof (dev_dep[0] */ ++#define BCM4712_CHIP_ID 0x4712 /* 4712 chipcommon chipid */ ++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ ++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ ++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ + -+/* A structure for the config registers is nice, but in most -+ * systems the config space is not memory mapped, so we need -+ * filed offsetts. :-( -+ */ -+#define PCI_CFG_VID 0 -+#define PCI_CFG_DID 2 -+#define PCI_CFG_CMD 4 -+#define PCI_CFG_STAT 6 -+#define PCI_CFG_REV 8 -+#define PCI_CFG_PROGIF 9 -+#define PCI_CFG_SUBCL 0xa -+#define PCI_CFG_BASECL 0xb -+#define PCI_CFG_CLSZ 0xc -+#define PCI_CFG_LATTIM 0xd -+#define PCI_CFG_HDR 0xe -+#define PCI_CFG_BIST 0xf -+#define PCI_CFG_BAR0 0x10 -+#define PCI_CFG_BAR1 0x14 -+#define PCI_CFG_BAR2 0x18 -+#define PCI_CFG_BAR3 0x1c -+#define PCI_CFG_BAR4 0x20 -+#define PCI_CFG_BAR5 0x24 -+#define PCI_CFG_CIS 0x28 -+#define PCI_CFG_SVID 0x2c -+#define PCI_CFG_SSID 0x2e -+#define PCI_CFG_ROMBAR 0x30 -+#define PCI_CFG_CAPPTR 0x34 -+#define PCI_CFG_INT 0x3c -+#define PCI_CFG_PIN 0x3d -+#define PCI_CFG_MINGNT 0x3e -+#define PCI_CFG_MAXLAT 0x3f ++#define BCM5365_CHIP_ID 0x5365 /* 5365 chipcommon chipid */ ++#define BCM5350_CHIP_ID 0x5350 /* bcm5350 chipcommon chipid */ ++#define BCM5352_CHIP_ID 0x5352 /* bcm5352 chipcommon chipid */ + -+/* Classes and subclasses */ ++#define BCM4320_CHIP_ID 0x4320 /* bcm4320 chipcommon chipid */ + -+typedef enum { -+ PCI_CLASS_OLD = 0, -+ PCI_CLASS_DASDI, -+ PCI_CLASS_NET, -+ PCI_CLASS_DISPLAY, -+ PCI_CLASS_MMEDIA, -+ PCI_CLASS_MEMORY, -+ PCI_CLASS_BRIDGE, -+ PCI_CLASS_COMM, -+ PCI_CLASS_BASE, -+ PCI_CLASS_INPUT, -+ PCI_CLASS_DOCK, -+ PCI_CLASS_CPU, -+ PCI_CLASS_SERIAL, -+ PCI_CLASS_INTELLIGENT = 0xe, -+ PCI_CLASS_SATELLITE, -+ PCI_CLASS_CRYPT, -+ PCI_CLASS_DSP, -+ PCI_CLASS_MAX -+} pci_classes; ++#define BCM4328_CHIP_ID 0x4328 /* bcm4328 chipcommon chipid */ + -+typedef enum { -+ PCI_DASDI_SCSI, -+ PCI_DASDI_IDE, -+ PCI_DASDI_FLOPPY, -+ PCI_DASDI_IPI, -+ PCI_DASDI_RAID, -+ PCI_DASDI_OTHER = 0x80 -+} pci_dasdi_subclasses; ++#define FPGA_JTAGM_ID 0x43f0 /* FPGA jtagm device id */ ++#define BCM43XX_JTAGM_ID 0x43f1 /* 43xx jtagm device id */ ++#define BCM43XXOLD_JTAGM_ID 0x4331 /* 43xx old jtagm device id */ + -+typedef enum { -+ PCI_NET_ETHER, -+ PCI_NET_TOKEN, -+ PCI_NET_FDDI, -+ PCI_NET_ATM, -+ PCI_NET_OTHER = 0x80 -+} pci_net_subclasses; ++#define SDIOH_FPGA_ID 0x43f2 /* sdio host fpga */ ++#define SDIOD_FPGA_ID 0x43f4 /* sdio device fpga */ + -+typedef enum { -+ PCI_DISPLAY_VGA, -+ PCI_DISPLAY_XGA, -+ PCI_DISPLAY_3D, -+ PCI_DISPLAY_OTHER = 0x80 -+} pci_display_subclasses; ++#define MIMO_FPGA_ID 0x43f8 /* FPGA mimo minimacphy device id */ + -+typedef enum { -+ PCI_MMEDIA_VIDEO, -+ PCI_MMEDIA_AUDIO, -+ PCI_MMEDIA_PHONE, -+ PCI_MEDIA_OTHER = 0x80 -+} pci_mmedia_subclasses; ++#define BCM4785_CHIP_ID 0x4785 /* 4785 chipcommon chipid */ + -+typedef enum { -+ PCI_MEMORY_RAM, -+ PCI_MEMORY_FLASH, -+ PCI_MEMORY_OTHER = 0x80 -+} pci_memory_subclasses; ++/* PCMCIA vendor Id's */ + -+typedef enum { -+ PCI_BRIDGE_HOST, -+ PCI_BRIDGE_ISA, -+ PCI_BRIDGE_EISA, -+ PCI_BRIDGE_MC, -+ PCI_BRIDGE_PCI, -+ PCI_BRIDGE_PCMCIA, -+ PCI_BRIDGE_NUBUS, -+ PCI_BRIDGE_CARDBUS, -+ PCI_BRIDGE_RACEWAY, -+ PCI_BRIDGE_OTHER = 0x80 -+} pci_bridge_subclasses; ++#define VENDOR_BROADCOM_PCMCIA 0x02d0 + -+typedef enum { -+ PCI_COMM_UART, -+ PCI_COMM_PARALLEL, -+ PCI_COMM_MULTIUART, -+ PCI_COMM_MODEM, -+ PCI_COMM_OTHER = 0x80 -+} pci_comm_subclasses; ++/* SDIO vendor Id's */ ++#define VENDOR_BROADCOM_SDIO 0x00BF + -+typedef enum { -+ PCI_BASE_PIC, -+ PCI_BASE_DMA, -+ PCI_BASE_TIMER, -+ PCI_BASE_RTC, -+ PCI_BASE_PCI_HOTPLUG, -+ PCI_BASE_OTHER = 0x80 -+} pci_base_subclasses; + -+typedef enum { -+ PCI_INPUT_KBD, -+ PCI_INPUT_PEN, -+ PCI_INPUT_MOUSE, -+ PCI_INPUT_SCANNER, -+ PCI_INPUT_GAMEPORT, -+ PCI_INPUT_OTHER = 0x80 -+} pci_input_subclasses; ++/* boardflags */ ++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ ++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ ++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ ++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ ++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ ++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ ++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ ++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ ++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ ++#define BFL_FEM 0x0800 /* This board supports the Front End Module */ ++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ ++#define BFL_HGPA 0x2000 /* This board has a high gain PA */ ++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ ++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ + -+typedef enum { -+ PCI_DOCK_GENERIC, -+ PCI_DOCK_OTHER = 0x80 -+} pci_dock_subclasses; ++/* boardflags2 */ ++#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* This board has an external rxbb regulator */ ++#define BFL2_SSWITCH_AVAIL 0x00000002 /* This board has a superswitch for > 2 antennas */ ++#define BFL2_TXPWRCTRL_EN 0x00000004 /* This board permits TX Power Control to be enabled */ + -+typedef enum { -+ PCI_CPU_386, -+ PCI_CPU_486, -+ PCI_CPU_PENTIUM, -+ PCI_CPU_ALPHA = 0x10, -+ PCI_CPU_POWERPC = 0x20, -+ PCI_CPU_MIPS = 0x30, -+ PCI_CPU_COPROC = 0x40, -+ PCI_CPU_OTHER = 0x80 -+} pci_cpu_subclasses; ++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ ++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ ++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ ++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ ++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ ++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ ++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ ++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ ++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ ++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + -+typedef enum { -+ PCI_SERIAL_IEEE1394, -+ PCI_SERIAL_ACCESS, -+ PCI_SERIAL_SSA, -+ PCI_SERIAL_USB, -+ PCI_SERIAL_FIBER, -+ PCI_SERIAL_SMBUS, -+ PCI_SERIAL_OTHER = 0x80 -+} pci_serial_subclasses; ++/* power control defines */ ++#define PLL_DELAY 150 /* us pll on delay */ ++#define FREF_DELAY 200 /* us fref change delay */ ++#define MIN_SLOW_CLK 32 /* us Slow clock period */ ++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ + -+typedef enum { -+ PCI_INTELLIGENT_I2O, -+} pci_intelligent_subclasses; ++/* Reference Board Types */ + -+typedef enum { -+ PCI_SATELLITE_TV, -+ PCI_SATELLITE_AUDIO, -+ PCI_SATELLITE_VOICE, -+ PCI_SATELLITE_DATA, -+ PCI_SATELLITE_OTHER = 0x80 -+} pci_satellite_subclasses; ++#define BU4710_BOARD 0x0400 ++#define VSIM4710_BOARD 0x0401 ++#define QT4710_BOARD 0x0402 + -+typedef enum { -+ PCI_CRYPT_NETWORK, -+ PCI_CRYPT_ENTERTAINMENT, -+ PCI_CRYPT_OTHER = 0x80 -+} pci_crypt_subclasses; ++#define BU4309_BOARD 0x040a ++#define BCM94309CB_BOARD 0x040b ++#define BCM94309MP_BOARD 0x040c ++#define BCM4309AP_BOARD 0x040d + -+typedef enum { -+ PCI_DSP_DPIO, -+ PCI_DSP_OTHER = 0x80 -+} pci_dsp_subclasses; ++#define BCM94302MP_BOARD 0x040e + -+/* Header types */ -+typedef enum { -+ PCI_HEADER_NORMAL, -+ PCI_HEADER_BRIDGE, -+ PCI_HEADER_CARDBUS -+} pci_header_types; ++#define BU4306_BOARD 0x0416 ++#define BCM94306CB_BOARD 0x0417 ++#define BCM94306MP_BOARD 0x0418 + ++#define BCM94710D_BOARD 0x041a ++#define BCM94710R1_BOARD 0x041b ++#define BCM94710R4_BOARD 0x041c ++#define BCM94710AP_BOARD 0x041d + -+/* Overlay for a PCI-to-PCI bridge */ ++#define BU2050_BOARD 0x041f + -+#define PPB_RSVDA_MAX 2 -+#define PPB_RSVDD_MAX 8 + -+typedef struct _ppb_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long rsvd_a[PPB_RSVDA_MAX]; -+ unsigned char prim_bus; -+ unsigned char sec_bus; -+ unsigned char sub_bus; -+ unsigned char sec_lat; -+ unsigned char io_base; -+ unsigned char io_lim; -+ unsigned short sec_status; -+ unsigned short mem_base; -+ unsigned short mem_lim; -+ unsigned short pf_mem_base; -+ unsigned short pf_mem_lim; -+ unsigned long pf_mem_base_hi; -+ unsigned long pf_mem_lim_hi; -+ unsigned short io_base_hi; -+ unsigned short io_lim_hi; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long rsvd_b; -+ unsigned char rsvd_c; -+ unsigned char int_pin; -+ unsigned short bridge_ctrl; -+ unsigned char chip_ctrl; -+ unsigned char diag_ctrl; -+ unsigned short arb_ctrl; -+ unsigned long rsvd_d[PPB_RSVDD_MAX]; -+ unsigned char dev_dep[192]; -+} ppb_config_regs; ++#define BCM94309G_BOARD 0x0421 + ++#define BU4704_BOARD 0x0423 ++#define BU4702_BOARD 0x0424 + -+/* PCI CAPABILITY DEFINES */ -+#define PCI_CAP_POWERMGMTCAP_ID 0x01 -+#define PCI_CAP_MSICAP_ID 0x05 -+#define PCI_CAP_PCIECAP_ID 0x10 ++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ + -+/* Data structure to define the Message Signalled Interrupt facility -+ * Valid for PCI and PCIE configurations */ -+typedef struct _pciconfig_cap_msi { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short msgctrl; -+ unsigned int msgaddr; -+} pciconfig_cap_msi; + -+/* Data structure to define the Power managment facility -+ * Valid for PCI and PCIE configurations */ -+typedef struct _pciconfig_cap_pwrmgmt { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short pme_cap; -+ unsigned short pme_sts_ctrl; -+ unsigned char pme_bridge_ext; -+ unsigned char data; -+} pciconfig_cap_pwrmgmt; ++#define BCM94702MN_BOARD 0x0428 + -+/* Data structure to define the PCIE capability */ -+typedef struct _pciconfig_cap_pcie { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short pcie_cap; -+ unsigned int dev_cap; -+ unsigned short dev_ctrl; -+ unsigned short dev_status; -+ unsigned int link_cap; -+ unsigned short link_ctrl; -+ unsigned short link_status; -+} pciconfig_cap_pcie; ++/* BCM4702 1U CompactPCI Board */ ++#define BCM94702CPCI_BOARD 0x0429 + -+/* PCIE Enhanced CAPABILITY DEFINES */ -+#define PCIE_EXTCFG_OFFSET 0x100 -+#define PCIE_ADVERRREP_CAPID 0x0001 -+#define PCIE_VC_CAPID 0x0002 -+#define PCIE_DEVSNUM_CAPID 0x0003 -+#define PCIE_PWRBUDGET_CAPID 0x0004 ++/* BCM4702 with BCM95380 VLAN Router */ ++#define BCM95380RR_BOARD 0x042a + -+/* Header to define the PCIE specific capabilities in the extended config space */ -+typedef struct _pcie_enhanced_caphdr { -+ unsigned short capID; -+ unsigned short cap_ver : 4; -+ unsigned short next_ptr : 12; -+} pcie_enhanced_caphdr; ++/* cb4306 with SiGe PA */ ++#define BCM94306CBSG_BOARD 0x042b + ++/* cb4306 with SiGe PA */ ++#define PCSG94306_BOARD 0x042d + -+/* Everything below is BRCM HND proprietary */ ++/* bu4704 with sdram */ ++#define BU4704SD_BOARD 0x042e + -+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ -+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ -+#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ -+#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ -+#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ -+#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ -+#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ -+#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ -+#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ -+#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ -+#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ -+#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ ++/* Dual 11a/11g Router */ ++#define BCM94704AGR_BOARD 0x042f + -+#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ -+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ ++/* 11a-only minipci */ ++#define BCM94308MP_BOARD 0x0430 + -+/* PCI_INT_STATUS */ -+#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ + -+/* PCI_INT_MASK */ -+#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ -+#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ -+#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ + -+/* PCI_SPROM_CONTROL */ -+#define SPROM_BLANK 0x04 /* indicating a blank sprom */ -+#define SPROM_WRITEEN 0x10 /* sprom write enable */ -+#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ ++#define BU4712_BOARD 0x0444 ++#define BU4712SD_BOARD 0x045d ++#define BU4712L_BOARD 0x045f + -+#define SPROM_SIZE 256 /* sprom size in 16-bit */ -+#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ ++/* BCM4712 boards */ ++#define BCM94712AP_BOARD 0x0445 ++#define BCM94712P_BOARD 0x0446 + -+/* PCI_CFG_CMD_STAT */ -+#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ ++/* BCM4318 boards */ ++#define BU4318_BOARD 0x0447 ++#define CB4318_BOARD 0x0448 ++#define MPG4318_BOARD 0x0449 ++#define MP4318_BOARD 0x044a ++#define SD4318_BOARD 0x044b + -+#endif -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbchipc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbchipc.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbchipc.h 2005-12-16 23:39:10.932836000 +0100 -@@ -0,0 +1,440 @@ -+/* -+ * SiliconBackplane Chipcommon core hardware definitions. -+ * -+ * The chipcommon core provides chip identification, SB control, -+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, -+ * gpio interface, extbus, and support for serial and parallel flashes. -+ * -+ * $Id$ -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ ++/* BCM63XX boards */ ++#define BCM96338_BOARD 0x6338 ++#define BCM96348_BOARD 0x6348 + -+#ifndef _SBCHIPC_H -+#define _SBCHIPC_H ++/* Another mp4306 with SiGe */ ++#define BCM94306P_BOARD 0x044c + ++/* mp4303 */ ++#define BCM94303MP_BOARD 0x044e + -+#ifndef _LANGUAGE_ASSEMBLY ++/* mpsgh4306 */ ++#define BCM94306MPSGH_BOARD 0x044f + -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ ++/* BRCM 4306 w/ Front End Modules */ ++#define BCM94306MPM 0x0450 ++#define BCM94306MPL 0x0453 + -+typedef volatile struct { -+ uint32 chipid; /* 0x0 */ -+ uint32 capabilities; -+ uint32 corecontrol; /* corerev >= 1 */ -+ uint32 bist; ++/* 4712agr */ ++#define BCM94712AGR_BOARD 0x0451 + -+ /* OTP */ -+ uint32 otpstatus; /* 0x10, corerev >= 10 */ -+ uint32 otpcontrol; -+ uint32 otpprog; -+ uint32 PAD; ++/* pcmcia 4303 */ ++#define PC4303_BOARD 0x0454 + -+ /* Interrupt control */ -+ uint32 intstatus; /* 0x20 */ -+ uint32 intmask; -+ uint32 chipcontrol; /* 0x28, rev >= 11 */ -+ uint32 chipstatus; /* 0x2c, rev >= 11 */ ++/* 5350K */ ++#define BCM95350K_BOARD 0x0455 + -+ /* Jtag Master */ -+ uint32 jtagcmd; /* 0x30, rev >= 10 */ -+ uint32 jtagir; -+ uint32 jtagdr; -+ uint32 jtagctrl; ++/* 5350R */ ++#define BCM95350R_BOARD 0x0456 + -+ /* serial flash interface registers */ -+ uint32 flashcontrol; /* 0x40 */ -+ uint32 flashaddress; -+ uint32 flashdata; -+ uint32 PAD[1]; ++/* 4306mplna */ ++#define BCM94306MPLNA_BOARD 0x0457 + -+ /* Silicon backplane configuration broadcast control */ -+ uint32 broadcastaddress; /* 0x50 */ -+ uint32 broadcastdata; -+ uint32 PAD[2]; ++/* 4320 boards */ ++#define BU4320_BOARD 0x0458 ++#define BU4320S_BOARD 0x0459 ++#define BCM94320PH_BOARD 0x045a + -+ /* gpio - cleared only by power-on-reset */ -+ uint32 gpioin; /* 0x60 */ -+ uint32 gpioout; -+ uint32 gpioouten; -+ uint32 gpiocontrol; -+ uint32 gpiointpolarity; -+ uint32 gpiointmask; -+ uint32 PAD[2]; ++/* 4306mph */ ++#define BCM94306MPH_BOARD 0x045b + -+ /* Watchdog timer */ -+ uint32 watchdog; /* 0x80 */ -+ uint32 PAD[1]; ++/* 4306pciv */ ++#define BCM94306PCIV_BOARD 0x045c + -+ /*GPIO based LED powersave registers corerev >= 16*/ -+ uint32 gpiotimerval; /*0x88 */ -+ uint32 gpiotimeroutmask; ++#define BU4712SD_BOARD 0x045d + -+ /* clock control */ -+ uint32 clockcontrol_n; /* 0x90 */ -+ uint32 clockcontrol_sb; /* aka m0 */ -+ uint32 clockcontrol_pci; /* aka m1 */ -+ uint32 clockcontrol_m2; /* mii/uart/mipsref */ -+ uint32 clockcontrol_mips; /* aka m3 */ -+ uint32 clkdiv; /* corerev >= 3 */ -+ uint32 PAD[2]; ++#define BCM94320PFLSH_BOARD 0x045e + -+ /* pll delay registers (corerev >= 4) */ -+ uint32 pll_on_delay; /* 0xb0 */ -+ uint32 fref_sel_delay; -+ uint32 slow_clk_ctl; /* 5 < corerev < 10 */ -+ uint32 PAD[1]; ++#define BU4712L_BOARD 0x045f ++#define BCM94712LGR_BOARD 0x0460 ++#define BCM94320R_BOARD 0x0461 + -+ /* Instaclock registers (corerev >= 10) */ -+ uint32 system_clk_ctl; /* 0xc0 */ -+ uint32 clkstatestretch; -+ uint32 PAD[14]; ++#define BU5352_BOARD 0x0462 + -+ /* ExtBus control registers (corerev >= 3) */ -+ uint32 pcmcia_config; /* 0x100 */ -+ uint32 pcmcia_memwait; -+ uint32 pcmcia_attrwait; -+ uint32 pcmcia_iowait; -+ uint32 ide_config; -+ uint32 ide_memwait; -+ uint32 ide_attrwait; -+ uint32 ide_iowait; -+ uint32 prog_config; -+ uint32 prog_waitcount; -+ uint32 flash_config; -+ uint32 flash_waitcount; -+ uint32 PAD[116]; ++#define BCM94318MPGH_BOARD 0x0463 + -+ /* uarts */ -+ uint8 uart0data; /* 0x300 */ -+ uint8 uart0imr; -+ uint8 uart0fcr; -+ uint8 uart0lcr; -+ uint8 uart0mcr; -+ uint8 uart0lsr; -+ uint8 uart0msr; -+ uint8 uart0scratch; -+ uint8 PAD[248]; /* corerev >= 1 */ ++#define BU4311_BOARD 0x0464 ++#define BCM94311MC_BOARD 0x0465 ++#define BCM94311MCAG_BOARD 0x0466 + -+ uint8 uart1data; /* 0x400 */ -+ uint8 uart1imr; -+ uint8 uart1fcr; -+ uint8 uart1lcr; -+ uint8 uart1mcr; -+ uint8 uart1lsr; -+ uint8 uart1msr; -+ uint8 uart1scratch; -+} chipcregs_t; ++#define BCM95352GR_BOARD 0x0467 + -+#endif /* _LANGUAGE_ASSEMBLY */ ++/* bcm95351agr */ ++#define BCM95351AGR_BOARD 0x0470 + -+#define CC_CHIPID 0 -+#define CC_CAPABILITIES 4 -+#define CC_JTAGCMD 0x30 -+#define CC_JTAGIR 0x34 -+#define CC_JTAGDR 0x38 -+#define CC_JTAGCTRL 0x3c -+#define CC_WATCHDOG 0x80 -+#define CC_CLKC_N 0x90 -+#define CC_CLKC_M0 0x94 -+#define CC_CLKC_M1 0x98 -+#define CC_CLKC_M2 0x9c -+#define CC_CLKC_M3 0xa0 -+#define CC_CLKDIV 0xa4 -+#define CC_SYS_CLK_CTL 0xc0 -+#define CC_OTP 0x800 ++/* bcm94704mpcb */ ++#define BCM94704MPCB_BOARD 0x0472 + -+/* chipid */ -+#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ -+#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ -+#define CID_REV_SHIFT 16 /* Chip Revision shift */ -+#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ -+#define CID_PKG_SHIFT 20 /* Package Option shift */ -+#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ -+#define CID_CC_SHIFT 24 ++/* 4785 boards */ ++#define BU4785_BOARD 0x0478 + -+/* capabilities */ -+#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ -+#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ -+#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ -+#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ -+#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ -+#define CAP_EXTBUS 0x00000040 /* External bus present */ -+#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ -+#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ -+#define CAP_PWR_CTL 0x00040000 /* Power control */ -+#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ -+#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ -+#define CAP_OTPSIZE_BASE 5 /* OTP Size base */ -+#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ -+#define CAP_ROM 0x00800000 /* Internal boot rom active */ ++/* 4321 boards */ ++#define BU4321_BOARD 0x046b ++#define BU4321E_BOARD 0x047c ++#define MP4321_BOARD 0x046c ++#define CB2_4321_BOARD 0x046d ++#define MC4321_BOARD 0x046e + -+/* PLL type */ -+#define PLL_NONE 0x00000000 -+#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ -+#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ -+#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ -+#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ -+#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */ -+#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ -+#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */ ++/* # of GPIO pins */ ++#define GPIO_NUMPINS 16 + -+/* corecontrol */ -+#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ -+#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ ++/* radio ID codes */ ++#define NORADIO_ID 0xe4f5 ++#define NORADIO_IDCODE 0x4e4f5246 + -+/* Fields in the otpstatus register */ -+#define OTPS_PROGFAIL 0x80000000 -+#define OTPS_PROTECT 0x00000007 -+#define OTPS_HW_PROTECT 0x00000001 -+#define OTPS_SW_PROTECT 0x00000002 -+#define OTPS_CID_PROTECT 0x00000004 ++#define BCM2050_ID 0x2050 ++#define BCM2050_IDCODE 0x02050000 ++#define BCM2050A0_IDCODE 0x1205017f ++#define BCM2050A1_IDCODE 0x2205017f ++#define BCM2050R8_IDCODE 0x8205017f + -+/* Fields in the otpcontrol register */ -+#define OTPC_RECWAIT 0xff000000 -+#define OTPC_PROGWAIT 0x00ffff00 -+#define OTPC_PRW_SHIFT 8 -+#define OTPC_MAXFAIL 0x00000038 -+#define OTPC_VSEL 0x00000006 -+#define OTPC_SELVL 0x00000001 ++#define BCM2055_ID 0x2055 ++#define BCM2055_IDCODE 0x02055000 ++#define BCM2055A0_IDCODE 0x1205517f + -+/* Fields in otpprog */ -+#define OTPP_COL_MASK 0x000000ff -+#define OTPP_ROW_MASK 0x0000ff00 -+#define OTPP_ROW_SHIFT 8 -+#define OTPP_READERR 0x10000000 -+#define OTPP_VALUE 0x20000000 -+#define OTPP_VALUE_SHIFT 29 -+#define OTPP_READ 0x40000000 -+#define OTPP_START 0x80000000 -+#define OTPP_BUSY 0x80000000 ++#define BCM2060_ID 0x2060 ++#define BCM2060_IDCODE 0x02060000 ++#define BCM2060WW_IDCODE 0x1206017f + -+/* jtagcmd */ -+#define JCMD_START 0x80000000 -+#define JCMD_BUSY 0x80000000 -+#define JCMD_PAUSE 0x40000000 -+#define JCMD0_ACC_MASK 0x0000f000 -+#define JCMD0_ACC_IRDR 0x00000000 -+#define JCMD0_ACC_DR 0x00001000 -+#define JCMD0_ACC_IR 0x00002000 -+#define JCMD0_ACC_RESET 0x00003000 -+#define JCMD0_ACC_IRPDR 0x00004000 -+#define JCMD0_ACC_PDR 0x00005000 -+#define JCMD0_IRW_MASK 0x00000f00 -+#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ -+#define JCMD_ACC_IRDR 0x00000000 -+#define JCMD_ACC_DR 0x00010000 -+#define JCMD_ACC_IR 0x00020000 -+#define JCMD_ACC_RESET 0x00030000 -+#define JCMD_ACC_IRPDR 0x00040000 -+#define JCMD_ACC_PDR 0x00050000 -+#define JCMD_IRW_MASK 0x00001f00 -+#define JCMD_IRW_SHIFT 8 -+#define JCMD_DRW_MASK 0x0000003f ++#define BCM2062_ID 0x2062 ++#define BCM2062_IDCODE 0x02062000 ++#define BCM2062A0_IDCODE 0x0206217f + -+/* jtagctrl */ -+#define JCTRL_FORCE_CLK 4 /* Force clock */ -+#define JCTRL_EXT_EN 2 /* Enable external targets */ -+#define JCTRL_EN 1 /* Enable Jtag master */ ++/* parts of an idcode: */ ++#define IDCODE_MFG_MASK 0x00000fff ++#define IDCODE_MFG_SHIFT 0 ++#define IDCODE_ID_MASK 0x0ffff000 ++#define IDCODE_ID_SHIFT 12 ++#define IDCODE_REV_MASK 0xf0000000 ++#define IDCODE_REV_SHIFT 28 + -+/* Fields in clkdiv */ -+#define CLKD_SFLASH 0x0f000000 -+#define CLKD_SFLASH_SHIFT 24 -+#define CLKD_OTP 0x000f0000 -+#define CLKD_OTP_SHIFT 16 -+#define CLKD_JTAG 0x00000f00 -+#define CLKD_JTAG_SHIFT 8 -+#define CLKD_UART 0x000000ff ++#endif /* _BCMDEVS_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h +--- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,198 @@ ++/* ++ * local version of endian.h - byte order defines ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: bcmendian.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $ ++*/ + -+/* intstatus/intmask */ -+#define CI_GPIO 0x00000001 /* gpio intr */ -+#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ -+#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ ++#ifndef _BCMENDIAN_H_ ++#define _BCMENDIAN_H_ + -+/* slow_clk_ctl */ -+#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ -+#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ -+#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ -+#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ -+#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ -+#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ -+#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ -+#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ -+#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ -+#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ -+#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ -+#define SCC_CD_SHIFT 16 ++#include + -+/* system_clk_ctl */ -+#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ -+#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ -+#define SYCC_FP 0x00000004 /* ForcePLLOn */ -+#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ -+#define SYCC_HR 0x00000010 /* Force HT */ -+#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4+divisor)) */ -+#define SYCC_CD_SHIFT 16 ++/* Byte swap a 16 bit value */ ++#define BCMSWAP16(val) \ ++ ((uint16)(\ ++ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ ++ (((uint16)(val) & (uint16)0xff00U) >> 8))) + -+/* gpiotimerval*/ -+#define GPIO_ONTIME_SHIFT 16 ++/* Byte swap a 32 bit value */ ++#define BCMSWAP32(val) \ ++ ((uint32)(\ ++ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ ++ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ ++ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ ++ (((uint32)(val) & (uint32)0xff000000UL) >> 24))) + -+/* clockcontrol_n */ -+#define CN_N1_MASK 0x3f /* n1 control */ -+#define CN_N2_MASK 0x3f00 /* n2 control */ -+#define CN_N2_SHIFT 8 -+#define CN_PLLC_MASK 0xf0000 /* pll control */ -+#define CN_PLLC_SHIFT 16 ++/* 2 Byte swap a 32 bit value */ ++#define BCMSWAP32BY16(val) \ ++ ((uint32)(\ ++ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \ ++ (((uint32)(val) & (uint32)0xffff0000UL) >> 16))) + -+/* clockcontrol_sb/pci/uart */ -+#define CC_M1_MASK 0x3f /* m1 control */ -+#define CC_M2_MASK 0x3f00 /* m2 control */ -+#define CC_M2_SHIFT 8 -+#define CC_M3_MASK 0x3f0000 /* m3 control */ -+#define CC_M3_SHIFT 16 -+#define CC_MC_MASK 0x1f000000 /* mux control */ -+#define CC_MC_SHIFT 24 + -+/* N3M Clock control magic field values */ -+#define CC_F6_2 0x02 /* A factor of 2 in */ -+#define CC_F6_3 0x03 /* 6-bit fields like */ -+#define CC_F6_4 0x05 /* N1, M1 or M3 */ -+#define CC_F6_5 0x09 -+#define CC_F6_6 0x11 -+#define CC_F6_7 0x21 ++static INLINE uint16 ++bcmswap16(uint16 val) ++{ ++ return BCMSWAP16(val); ++} + -+#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++static INLINE uint32 ++bcmswap32(uint32 val) ++{ ++ return BCMSWAP32(val); ++} + -+#define CC_MC_BYPASS 0x08 -+#define CC_MC_M1 0x04 -+#define CC_MC_M1M2 0x02 -+#define CC_MC_M1M2M3 0x01 -+#define CC_MC_M1M3 0x11 ++static INLINE uint32 ++bcmswap32by16(uint32 val) ++{ ++ return BCMSWAP32BY16(val); ++} + -+/* Type 2 Clock control magic field values */ -+#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ -+#define CC_T2M2_BIAS 3 /* m2 bias */ ++/* buf - start of buffer of shorts to swap */ ++/* len - byte length of buffer */ ++static INLINE void ++bcmswap16_buf(uint16 *buf, uint len) ++{ ++ len = len/2; + -+#define CC_T2MC_M1BYP 1 -+#define CC_T2MC_M2BYP 2 -+#define CC_T2MC_M3BYP 4 ++ while (len--) { ++ *buf = bcmswap16(*buf); ++ buf++; ++ } ++} + -+/* Type 6 Clock control magic field values */ -+#define CC_T6_MMASK 1 /* bits of interest in m */ -+#define CC_T6_M0 120000000 /* sb clock for m = 0 */ -+#define CC_T6_M1 100000000 /* sb clock for m = 1 */ -+#define SB2MIPS_T6(sb) (2 * (sb)) ++#ifndef hton16 ++#ifndef IL_BIGENDIAN ++#define HTON16(i) BCMSWAP16(i) ++#define hton16(i) bcmswap16(i) ++#define hton32(i) bcmswap32(i) ++#define ntoh16(i) bcmswap16(i) ++#define ntoh32(i) bcmswap32(i) ++#define ltoh16(i) (i) ++#define ltoh32(i) (i) ++#define htol16(i) (i) ++#define htol32(i) (i) ++#else ++#define HTON16(i) (i) ++#define hton16(i) (i) ++#define hton32(i) (i) ++#define ntoh16(i) (i) ++#define ntoh32(i) (i) ++#define ltoh16(i) bcmswap16(i) ++#define ltoh32(i) bcmswap32(i) ++#define htol16(i) bcmswap16(i) ++#define htol32(i) bcmswap32(i) ++#endif /* IL_BIGENDIAN */ ++#endif /* hton16 */ + -+/* Common clock base */ -+#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ -+#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */ ++#ifndef IL_BIGENDIAN ++#define ltoh16_buf(buf, i) ++#define htol16_buf(buf, i) ++#else ++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#endif /* IL_BIGENDIAN */ + -+/* Clock control values for 200Mhz in 5350 */ -+#define CLKC_5350_N 0x0311 -+#define CLKC_5350_M 0x04020009 ++/* ++* store 16-bit value to unaligned little endian byte array. ++*/ ++static INLINE void ++htol16_ua_store(uint16 val, uint8 *bytes) ++{ ++ bytes[0] = val&0xff; ++ bytes[1] = val>>8; ++} + -+/* Flash types in the chipcommon capabilities register */ -+#define FLASH_NONE 0x000 /* No flash */ -+#define SFLASH_ST 0x100 /* ST serial flash */ -+#define SFLASH_AT 0x200 /* Atmel serial flash */ -+#define PFLASH 0x700 /* Parallel flash */ ++/* ++* store 32-bit value to unaligned little endian byte array. ++*/ ++static INLINE void ++htol32_ua_store(uint32 val, uint8 *bytes) ++{ ++ bytes[0] = val&0xff; ++ bytes[1] = (val>>8)&0xff; ++ bytes[2] = (val>>16)&0xff; ++ bytes[3] = val>>24; ++} + -+/* Bits in the config registers */ -+#define CC_CFG_EN 0x0001 /* Enable */ -+#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ -+#define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */ -+#define CC_CFG_EM_SYNC 0x0004 /* Synchronous */ -+#define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */ -+#define CC_CFG_EM_IDE 0x000a /* IDE */ -+#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ -+#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ -+#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ -+#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ ++/* ++* store 16-bit value to unaligned network(big) endian byte array. ++*/ ++static INLINE void ++hton16_ua_store(uint16 val, uint8 *bytes) ++{ ++ bytes[1] = val&0xff; ++ bytes[0] = val>>8; ++} + -+/* Start/busy bit in flashcontrol */ -+#define SFLASH_START 0x80000000 -+#define SFLASH_BUSY SFLASH_START ++/* ++* store 32-bit value to unaligned network(big) endian byte array. ++*/ ++static INLINE void ++hton32_ua_store(uint32 val, uint8 *bytes) ++{ ++ bytes[3] = val&0xff; ++ bytes[2] = (val>>8)&0xff; ++ bytes[1] = (val>>16)&0xff; ++ bytes[0] = val>>24; ++} + -+/* flashcontrol opcodes for ST flashes */ -+#define SFLASH_ST_WREN 0x0006 /* Write Enable */ -+#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ -+#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ -+#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ -+#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ -+#define SFLASH_ST_PP 0x0302 /* Page Program */ -+#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ -+#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ -+#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ -+#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ ++/* ++* load 16-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint16 ++ltoh16_ua(void *bytes) ++{ ++ return (((uint8*)bytes)[1]<<8)+((uint8 *)bytes)[0]; ++} + -+/* Status register bits for ST flashes */ -+#define SFLASH_ST_WIP 0x01 /* Write In Progress */ -+#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ -+#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ -+#define SFLASH_ST_BP_SHIFT 2 -+#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ ++/* ++* load 32-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint32 ++ltoh32_ua(void *bytes) ++{ ++ return (((uint8*)bytes)[3]<<24)+(((uint8*)bytes)[2]<<16)+ ++ (((uint8*)bytes)[1]<<8)+((uint8*)bytes)[0]; ++} + -+/* flashcontrol opcodes for Atmel flashes */ -+#define SFLASH_AT_READ 0x07e8 -+#define SFLASH_AT_PAGE_READ 0x07d2 -+#define SFLASH_AT_BUF1_READ -+#define SFLASH_AT_BUF2_READ -+#define SFLASH_AT_STATUS 0x01d7 -+#define SFLASH_AT_BUF1_WRITE 0x0384 -+#define SFLASH_AT_BUF2_WRITE 0x0387 -+#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 -+#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 -+#define SFLASH_AT_BUF1_PROGRAM 0x0288 -+#define SFLASH_AT_BUF2_PROGRAM 0x0289 -+#define SFLASH_AT_PAGE_ERASE 0x0281 -+#define SFLASH_AT_BLOCK_ERASE 0x0250 -+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 -+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 -+#define SFLASH_AT_BUF1_LOAD 0x0253 -+#define SFLASH_AT_BUF2_LOAD 0x0255 -+#define SFLASH_AT_BUF1_COMPARE 0x0260 -+#define SFLASH_AT_BUF2_COMPARE 0x0261 -+#define SFLASH_AT_BUF1_REPROGRAM 0x0258 -+#define SFLASH_AT_BUF2_REPROGRAM 0x0259 ++/* ++* load 16-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint16 ++ntoh16_ua(void *bytes) ++{ ++ return (((uint8*)bytes)[0]<<8)+((uint8*)bytes)[1]; ++} + -+/* Status register bits for Atmel flashes */ -+#define SFLASH_AT_READY 0x80 -+#define SFLASH_AT_MISMATCH 0x40 -+#define SFLASH_AT_ID_MASK 0x38 -+#define SFLASH_AT_ID_SHIFT 3 ++/* ++* load 32-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint32 ++ntoh32_ua(void *bytes) ++{ ++ return (((uint8*)bytes)[0]<<24)+(((uint8*)bytes)[1]<<16)+ ++ (((uint8*)bytes)[2]<<8)+((uint8*)bytes)[3]; ++} + -+/* OTP regions */ -+#define OTP_HW_REGION OTPS_HW_PROTECT -+#define OTP_SW_REGION OTPS_SW_PROTECT -+#define OTP_CID_REGION OTPS_CID_PROTECT ++#define ltoh_ua(ptr) (\ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \ ++ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \ ++) + -+/* OTP regions (Byte offsets from otp size) */ -+#define OTP_SWLIM_OFF (-8) -+#define OTP_CIDBASE_OFF 0 -+#define OTP_CIDLIM_OFF 8 ++#define ntoh_ua(ptr) (\ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \ ++ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \ ++) + -+/* Predefined OTP words (Word offset from otp size) */ -+#define OTP_BOUNDARY_OFF (-4) -+#define OTP_HWSIGN_OFF (-3) -+#define OTP_SWSIGN_OFF (-2) -+#define OTP_CIDSIGN_OFF (-1) ++#endif /* _BCMENDIAN_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h +--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,159 @@ ++/* ++ * NVRAM variable manipulation ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: bcmnvram.h,v 1.17 2006/03/02 12:33:44 honor Exp $ ++ */ + -+#define OTP_CID_OFF 0 -+#define OTP_PKG_OFF 1 -+#define OTP_FID_OFF 2 -+#define OTP_RSV_OFF 3 -+#define OTP_LIM_OFF 4 ++#ifndef _bcmnvram_h_ ++#define _bcmnvram_h_ + -+#define OTP_SIGNATURE 0x578a -+#define OTP_MAGIC 0x4e56 ++#ifndef _LANGUAGE_ASSEMBLY ++ ++#include ++#include ++ ++struct nvram_header { ++ uint32 magic; ++ uint32 len; ++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ ++ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ ++ uint32 config_ncdl; /* ncdl values for memc */ ++}; ++ ++struct nvram_tuple { ++ char *name; ++ char *value; ++ struct nvram_tuple *next; ++}; + -+#endif /* _SBCHIPC_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbconfig.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbconfig.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbconfig.h 2005-12-16 23:39:10.932836000 +0100 -@@ -0,0 +1,342 @@ +/* -+ * Broadcom SiliconBackplane hardware register definitions. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Initialize NVRAM access. May be unnecessary or undefined on certain ++ * platforms. + */ ++extern int nvram_init(void *sbh); + -+#ifndef _SBCONFIG_H -+#define _SBCONFIG_H -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif ++/* ++ * Disable NVRAM access. May be unnecessary or undefined on certain ++ * platforms. ++ */ ++extern void nvram_exit(void *sbh); + +/* -+ * SiliconBackplane Address Map. -+ * All regions may not exist on all chips. ++ * Get the value of an NVRAM variable. The pointer returned may be ++ * invalid after a set. ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined + */ -+#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ -+#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ -+#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ ++extern char * nvram_get(const char *name); + -+#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ -+#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ ++/* ++ * Read the reset GPIO value from the nvram and set the GPIO ++ * as input ++ */ ++extern int BCMINITFN(nvram_resetgpio_init)(void *sbh); ++extern int BCMINITFN(nvram_gpio_init)(const char *name, void *sbh); ++extern int BCMINITFN(nvram_gpio_set)(const char *name, void *sbh, int type); + -+#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ -+#define SB_FLASH1 0x1fc00000 /* Flash Region 1 */ -+#define SB_FLASH1_SZ 0x00400000 /* Size of Flash Region 1 */ ++/* ++ * Get the value of an NVRAM variable. ++ * @param name name of variable to get ++ * @return value of variable or NUL if undefined ++ */ ++#define nvram_safe_get(name) (nvram_get(name) ? : "") + -+#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ -+#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ -+#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ -+#define SB_EUART (SB_EXTIF_BASE + 0x00800000) -+#define SB_LED (SB_EXTIF_BASE + 0x00900000) ++#define nvram_safe_unset(name) ({ \ ++ if(nvram_get(name)) \ ++ nvram_unset(name); \ ++}) + ++#define nvram_safe_set(name, value) ({ \ ++ if(!nvram_get(name) || strcmp(nvram_get(name), value)) \ ++ nvram_set(name, value); \ ++}) + -+/* enumeration space related defs */ -+#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ -+#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) -+#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ -+#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ ++/* ++ * Match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is string equal ++ * to match or FALSE otherwise ++ */ ++static INLINE int ++nvram_match(char *name, char *match) { ++ const char *value = nvram_get(name); ++ return (value && !strcmp(value, match)); ++} + -+/* mips address */ -+#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++/* ++ * Inversely match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is not string ++ * equal to invmatch or FALSE otherwise ++ */ ++static INLINE int ++nvram_invmatch(char *name, char *invmatch) { ++ const char *value = nvram_get(name); ++ return (value && strcmp(value, invmatch)); ++} + +/* -+ * Sonics Configuration Space Registers. ++ * Set the value of an NVRAM variable. The name and value strings are ++ * copied into private storage. Pointers to previously set values ++ * may become invalid. The new value may be immediately ++ * retrieved but will not be permanently stored until a commit. ++ * @param name name of variable to set ++ * @param value value of variable ++ * @return 0 on success and errno on failure + */ -+#define SBIPSFLAG 0x08 -+#define SBTPSFLAG 0x18 -+#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ -+#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ -+#define SBADMATCH3 0x60 -+#define SBADMATCH2 0x68 -+#define SBADMATCH1 0x70 -+#define SBIMSTATE 0x90 -+#define SBINTVEC 0x94 -+#define SBTMSTATELOW 0x98 -+#define SBTMSTATEHIGH 0x9c -+#define SBBWA0 0xa0 -+#define SBIMCONFIGLOW 0xa8 -+#define SBIMCONFIGHIGH 0xac -+#define SBADMATCH0 0xb0 -+#define SBTMCONFIGLOW 0xb8 -+#define SBTMCONFIGHIGH 0xbc -+#define SBBCONFIG 0xc0 -+#define SBBSTATE 0xc8 -+#define SBACTCNFG 0xd8 -+#define SBFLAGST 0xe8 -+#define SBIDLOW 0xf8 -+#define SBIDHIGH 0xfc ++extern int nvram_set(const char *name, const char *value); + -+#ifndef _LANGUAGE_ASSEMBLY ++/* ++ * Unset an NVRAM variable. Pointers to previously set values ++ * remain valid until a set. ++ * @param name name of variable to unset ++ * @return 0 on success and errno on failure ++ * NOTE: use nvram_commit to commit this change to flash. ++ */ ++extern int nvram_unset(const char *name); + -+typedef volatile struct _sbconfig { -+ uint32 PAD[2]; -+ uint32 sbipsflag; /* initiator port ocp slave flag */ -+ uint32 PAD[3]; -+ uint32 sbtpsflag; /* target port ocp slave flag */ -+ uint32 PAD[11]; -+ uint32 sbtmerrloga; /* (sonics >= 2.3) */ -+ uint32 PAD; -+ uint32 sbtmerrlog; /* (sonics >= 2.3) */ -+ uint32 PAD[3]; -+ uint32 sbadmatch3; /* address match3 */ -+ uint32 PAD; -+ uint32 sbadmatch2; /* address match2 */ -+ uint32 PAD; -+ uint32 sbadmatch1; /* address match1 */ -+ uint32 PAD[7]; -+ uint32 sbimstate; /* initiator agent state */ -+ uint32 sbintvec; /* interrupt mask */ -+ uint32 sbtmstatelow; /* target state */ -+ uint32 sbtmstatehigh; /* target state */ -+ uint32 sbbwa0; /* bandwidth allocation table0 */ -+ uint32 PAD; -+ uint32 sbimconfiglow; /* initiator configuration */ -+ uint32 sbimconfighigh; /* initiator configuration */ -+ uint32 sbadmatch0; /* address match0 */ -+ uint32 PAD; -+ uint32 sbtmconfiglow; /* target configuration */ -+ uint32 sbtmconfighigh; /* target configuration */ -+ uint32 sbbconfig; /* broadcast configuration */ -+ uint32 PAD; -+ uint32 sbbstate; /* broadcast state */ -+ uint32 PAD[3]; -+ uint32 sbactcnfg; /* activate configuration */ -+ uint32 PAD[3]; -+ uint32 sbflagst; /* current sbflags */ -+ uint32 PAD[3]; -+ uint32 sbidlow; /* identification */ -+ uint32 sbidhigh; /* identification */ -+} sbconfig_t; ++/* ++ * Commit NVRAM variables to permanent storage. All pointers to values ++ * may be invalid after a commit. ++ * NVRAM values are undefined after a commit. ++ * @return 0 on success and errno on failure ++ */ ++extern int nvram_commit(void); + -+#endif /* _LANGUAGE_ASSEMBLY */ ++/* ++ * Get all NVRAM variables (format name=value\0 ... \0\0). ++ * @param buf buffer to store variables ++ * @param count size of buffer in bytes ++ * @return 0 on success and errno on failure ++ */ ++extern int nvram_getall(char *buf, int count); + -+/* sbipsflag */ -+#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ -+#define SBIPS_INT1_SHIFT 0 -+#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ -+#define SBIPS_INT2_SHIFT 8 -+#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ -+#define SBIPS_INT3_SHIFT 16 -+#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ -+#define SBIPS_INT4_SHIFT 24 ++extern int file2nvram(char *filename, char *varname); ++extern int nvram2file(char *varname, char *filename); + -+/* sbtpsflag */ -+#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ -+#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ ++#endif /* _LANGUAGE_ASSEMBLY */ + -+/* sbtmerrlog */ -+#define SBTMEL_CM 0x00000007 /* command */ -+#define SBTMEL_CI 0x0000ff00 /* connection id */ -+#define SBTMEL_EC 0x0f000000 /* error code */ -+#define SBTMEL_ME 0x80000000 /* multiple error */ ++#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ ++#define NVRAM_CLEAR_MAGIC 0x0 ++#define NVRAM_INVALID_MAGIC 0xFFFFFFFF ++#define NVRAM_VERSION 1 ++#define NVRAM_HEADER_SIZE 20 ++#define NVRAM_SPACE 0x8000 + -+/* sbimstate */ -+#define SBIM_PC 0xf /* pipecount */ -+#define SBIM_AP_MASK 0x30 /* arbitration policy */ -+#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ -+#define SBIM_AP_TS 0x10 /* use timesliaces only */ -+#define SBIM_AP_TK 0x20 /* use token only */ -+#define SBIM_AP_RSV 0x30 /* reserved */ -+#define SBIM_IBE 0x20000 /* inbanderror */ -+#define SBIM_TO 0x40000 /* timeout */ -+#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ -+#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ ++#define NVRAM_MAX_VALUE_LEN 255 ++#define NVRAM_MAX_PARAM_LEN 64 + -+/* sbtmstatelow */ -+#define SBTML_RESET 0x1 /* reset */ -+#define SBTML_REJ_MASK 0x6 /* reject */ -+#define SBTML_REJ_SHIFT 1 -+#define SBTML_CLK 0x10000 /* clock enable */ -+#define SBTML_FGC 0x20000 /* force gated clocks on */ -+#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ -+#define SBTML_PE 0x40000000 /* pme enable */ -+#define SBTML_BE 0x80000000 /* bist enable */ ++#endif /* _bcmnvram_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h +--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,108 @@ ++/* ++ * Misc useful routines to access NIC local SROM/OTP . ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: bcmsrom.h,v 1.1.1.13 2006/04/15 01:29:08 michael Exp $ ++ */ + -+/* sbtmstatehigh */ -+#define SBTMH_SERR 0x1 /* serror */ -+#define SBTMH_INT 0x2 /* interrupt */ -+#define SBTMH_BUSY 0x4 /* busy */ -+#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ -+#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ -+#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ -+#define SBTMH_GCR 0x20000000 /* gated clock request */ -+#define SBTMH_BISTF 0x40000000 /* bist failed */ -+#define SBTMH_BISTD 0x80000000 /* bist done */ ++#ifndef _bcmsrom_h_ ++#define _bcmsrom_h_ + ++/* Maximum srom: 4 Kilobits == 512 bytes */ ++#define SROM_MAX 512 + -+/* sbbwa0 */ -+#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ -+#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ -+#define SBBWA_TAB1_SHIFT 16 ++/* SROM Rev 4: Reallocate the software part of the srom to accomodate ++ * MIMO features. It assumes up to two PCIE functions and 440 bytes ++ * of useable srom i.e. the useable storage in chips with OTP that ++ * implements hardware redundancy. ++ */ + -+/* sbimconfiglow */ -+#define SBIMCL_STO_MASK 0x7 /* service timeout */ -+#define SBIMCL_RTO_MASK 0x70 /* request timeout */ -+#define SBIMCL_RTO_SHIFT 4 -+#define SBIMCL_CID_MASK 0xff0000 /* connection id */ -+#define SBIMCL_CID_SHIFT 16 ++#define SROM4_WORDS 220 ++ ++#define SROM4_SIGN 32 ++#define SROM4_SIGNATURE 0x5372 ++ ++#define SROM4_BREV 33 ++ ++#define SROM4_BFL0 34 ++#define SROM4_BFL1 35 ++#define SROM4_BFL2 36 ++#define SROM4_BFL3 37 ++ ++#define SROM4_MACHI 38 ++#define SROM4_MACMID 39 ++#define SROM4_MACLO 40 ++ ++#define SROM4_CCODE 41 ++#define SROM4_REGREV 42 ++ ++#define SROM4_LEDBH10 43 ++#define SROM4_LEDBH32 44 ++ ++#define SROM4_LEDDC 45 ++ ++#define SROM4_AA 46 ++#define SROM4_AA2G_MASK 0x00ff ++#define SROM4_AA2G_SHIFT 0 ++#define SROM4_AA5G_MASK 0xff00 ++#define SROM4_AA5G_SHIFT 8 ++ ++#define SROM4_AG10 47 ++#define SROM4_AG32 48 ++ ++#define SROM4_TXPID2G 49 ++#define SROM4_TXPID5G 51 ++#define SROM4_TXPID5GL 53 ++#define SROM4_TXPID5GH 55 ++ ++/* Per-path fields */ ++#define MAX_PATH 4 ++#define SROM4_PATH0 64 ++#define SROM4_PATH1 87 ++#define SROM4_PATH2 110 ++#define SROM4_PATH3 133 ++ ++#define SROM4_2G_ITT_MAXP 0 ++#define SROM4_2G_PA 1 ++#define SROM4_5G_ITT_MAXP 5 ++#define SROM4_5GLH_MAXP 6 ++#define SROM4_5G_PA 7 ++#define SROM4_5GL_PA 11 ++#define SROM4_5GH_PA 15 ++ ++/* Fields in the ITT_MAXP and 5GLH_MAXP words */ ++#define B2G_MAXP_MASK 0xff ++#define B2G_ITT_SHIFT 8 ++#define B5G_MAXP_MASK 0xff ++#define B5G_ITT_SHIFT 8 ++#define B5GH_MAXP_MASK 0xff ++#define B5GL_MAXP_SHIFT 8 ++ ++/* All the miriad power offsets */ ++#define SROM4_2G_CCKPO 156 ++#define SROM4_2G_OFDMPO 157 ++#define SROM4_5G_OFDMPO 159 ++#define SROM4_5GL_OFDMPO 161 ++#define SROM4_5GH_OFDMPO 163 ++#define SROM4_2G_MCSPO 165 ++#define SROM4_5G_MCSPO 173 ++#define SROM4_5GL_MCSPO 181 ++#define SROM4_5GH_MCSPO 189 ++#define SROM4_CCDPO 197 ++#define SROM4_STBCPO 198 ++#define SROM4_BW40PO 199 ++#define SROM4_BWDUPPO 200 ++ ++extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, uint *count); + -+/* sbimconfighigh */ -+#define SBIMCH_IEM_MASK 0xc /* inband error mode */ -+#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ -+#define SBIMCH_TEM_SHIFT 4 -+#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ -+#define SBIMCH_BEM_SHIFT 6 ++extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); ++extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); + -+/* sbadmatch0 */ -+#define SBAM_TYPE_MASK 0x3 /* address type */ -+#define SBAM_AD64 0x4 /* reserved */ -+#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ -+#define SBAM_ADINT0_SHIFT 3 -+#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ -+#define SBAM_ADINT1_SHIFT 3 -+#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ -+#define SBAM_ADINT2_SHIFT 3 -+#define SBAM_ADEN 0x400 /* enable */ -+#define SBAM_ADNEG 0x800 /* negative decode */ -+#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ -+#define SBAM_BASE0_SHIFT 8 -+#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ -+#define SBAM_BASE1_SHIFT 12 -+#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ -+#define SBAM_BASE2_SHIFT 16 ++#endif /* _bcmsrom_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h +--- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,433 @@ ++/* ++ * Misc useful os-independent macros and functions. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $ ++ */ + -+/* sbtmconfiglow */ -+#define SBTMCL_CD_MASK 0xff /* clock divide */ -+#define SBTMCL_CO_MASK 0xf800 /* clock offset */ -+#define SBTMCL_CO_SHIFT 11 -+#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ -+#define SBTMCL_IF_SHIFT 18 -+#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ -+#define SBTMCL_IM_SHIFT 24 ++#ifndef _bcmutils_h_ ++#define _bcmutils_h_ + -+/* sbtmconfighigh */ -+#define SBTMCH_BM_MASK 0x3 /* busy mode */ -+#define SBTMCH_RM_MASK 0x3 /* retry mode */ -+#define SBTMCH_RM_SHIFT 2 -+#define SBTMCH_SM_MASK 0x30 /* stop mode */ -+#define SBTMCH_SM_SHIFT 4 -+#define SBTMCH_EM_MASK 0x300 /* sb error mode */ -+#define SBTMCH_EM_SHIFT 8 -+#define SBTMCH_IM_MASK 0xc00 /* int mode */ -+#define SBTMCH_IM_SHIFT 10 ++/* ** driver-only section ** */ ++#ifdef BCMDRIVER + -+/* sbbconfig */ -+#define SBBC_LAT_MASK 0x3 /* sb latency */ -+#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ -+#define SBBC_MAX0_SHIFT 16 -+#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ -+#define SBBC_MAX1_SHIFT 20 ++#define _BCM_U 0x01 /* upper */ ++#define _BCM_L 0x02 /* lower */ ++#define _BCM_D 0x04 /* digit */ ++#define _BCM_C 0x08 /* cntrl */ ++#define _BCM_P 0x10 /* punct */ ++#define _BCM_S 0x20 /* white space (space/lf/tab) */ ++#define _BCM_X 0x40 /* hex digit */ ++#define _BCM_SP 0x80 /* hard space (0x20) */ + -+/* sbbstate */ -+#define SBBS_SRD 0x1 /* st reg disable */ -+#define SBBS_HRD 0x2 /* hold reg disable */ ++#define GPIO_PIN_NOTDEFINED 0x20 /* Pin not defined */ + -+/* sbidlow */ -+#define SBIDL_CS_MASK 0x3 /* config space */ -+#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ -+#define SBIDL_AR_SHIFT 3 -+#define SBIDL_SYNCH 0x40 /* sync */ -+#define SBIDL_INIT 0x80 /* initiator */ -+#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ -+#define SBIDL_MINLAT_SHIFT 8 -+#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ -+#define SBIDL_MAXLAT_SHIFT 12 -+#define SBIDL_FIRST 0x10000 /* this initiator is first */ -+#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ -+#define SBIDL_CW_SHIFT 18 -+#define SBIDL_TP_MASK 0xf00000 /* target ports */ -+#define SBIDL_TP_SHIFT 20 -+#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ -+#define SBIDL_IP_SHIFT 24 -+#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ -+#define SBIDL_RV_SHIFT 28 -+#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ -+#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ ++extern unsigned char bcm_ctype[]; ++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) + -+/* sbidhigh */ -+#define SBIDH_RC_MASK 0x000f /* revision code */ -+#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ -+#define SBIDH_RCE_SHIFT 8 -+#define SBCOREREV(sbidh) \ -+ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) -+#define SBIDH_CC_MASK 0x8ff0 /* core code */ -+#define SBIDH_CC_SHIFT 4 -+#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ -+#define SBIDH_VC_SHIFT 16 ++#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) ++#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) ++#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) ++#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) ++#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) ++#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) ++#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) ++#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) ++#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) + -+#define SB_COMMIT 0xfd8 /* update buffered registers value */ ++/* ++ * Spin at most 'us' microseconds while 'exp' is true. ++ * Caller should explicitly test 'exp' when this completes ++ * and take appropriate error action if 'exp' is still true. ++ */ ++#define SPINWAIT(exp, us) { \ ++ uint countdown = (us) + 9; \ ++ while ((exp) && (countdown >= 10)) {\ ++ OSL_DELAY(10); \ ++ countdown -= 10; \ ++ } \ ++} + -+/* vendor codes */ -+#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ ++struct ether_addr { ++ uint8 octet[6]; ++} __attribute__((packed)); + -+/* core codes */ -+#define SB_CC 0x800 /* chipcommon core */ -+#define SB_ILINE20 0x801 /* iline20 core */ -+#define SB_SDRAM 0x803 /* sdram core */ -+#define SB_PCI 0x804 /* pci core */ -+#define SB_MIPS 0x805 /* mips core */ -+#define SB_ENET 0x806 /* enet mac core */ -+#define SB_CODEC 0x807 /* v90 codec core */ -+#define SB_USB 0x808 /* usb 1.1 host/device core */ -+#define SB_ADSL 0x809 /* ADSL core */ -+#define SB_ILINE100 0x80a /* iline100 core */ -+#define SB_IPSEC 0x80b /* ipsec core */ -+#define SB_PCMCIA 0x80d /* pcmcia core */ -+#define SB_SOCRAM 0x80e /* internal memory core */ -+#define SB_MEMC 0x80f /* memc sdram core */ -+#define SB_EXTIF 0x811 /* external interface core */ -+#define SB_D11 0x812 /* 802.11 MAC core */ -+#define SB_MIPS33 0x816 /* mips3302 core */ -+#define SB_USB11H 0x817 /* usb 1.1 host core */ -+#define SB_USB11D 0x818 /* usb 1.1 device core */ -+#define SB_USB20H 0x819 /* usb 2.0 host core */ -+#define SB_USB20D 0x81a /* usb 2.0 device core */ -+#define SB_SDIOH 0x81b /* sdio host core */ -+#define SB_ROBO 0x81c /* roboswitch core */ -+#define SB_ATA100 0x81d /* parallel ATA core */ -+#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ -+#define SB_GIGETH 0x81f /* gigabit ethernet core */ -+#define SB_PCIE 0x820 /* pci express core */ -+#define SB_SRAMC 0x822 /* SRAM controller core */ -+#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ -+ -+#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ -+ -+/* Not really related to Silicon Backplane, but a couple of software -+ * conventions for the use the flash space: ++/* string */ ++extern uchar bcm_toupper(uchar c); ++extern ulong bcm_strtoul(char *cp, char **endp, uint base); ++extern char *bcmstrstr(char *haystack, char *needle); ++extern char *bcmstrcat(char *dest, const char *src); ++extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen); ++/* ethernet address */ ++extern char *bcm_ether_ntoa(struct ether_addr *ea, char *buf); ++/* variable access */ ++extern char *getvar(char *vars, char *name); ++extern int getintvar(char *vars, char *name); ++extern uint getgpiopin(char *vars, char *pin_name, uint def_pin); ++#ifdef BCMPERFSTATS ++extern void bcm_perf_enable(void); ++extern void bcmstats(char *fmt); ++extern void bcmlog(char *fmt, uint a1, uint a2); ++extern void bcmdumplog(char *buf, int size); ++extern int bcmdumplogent(char *buf, uint idx); ++#else ++#define bcm_perf_enable() ++#define bcmstats(fmt) ++#define bcmlog(fmt, a1, a2) ++#define bcmdumplog(buf, size) *buf = '\0' ++#define bcmdumplogent(buf, idx) -1 ++#endif /* BCMPERFSTATS */ ++extern char *bcm_nvram_vars(uint *length); ++extern int bcm_nvram_cache(void *sbh); ++ ++/* Support for sharing code across in-driver iovar implementations. ++ * The intent is that a driver use this structure to map iovar names ++ * to its (private) iovar identifiers, and the lookup function to ++ * find the entry. Macros are provided to map ids and get/set actions ++ * into a single number space for a switch statement. + */ + -+/* Minumum amount of flash we support */ -+#define FLASH_MIN 0x00020000 /* Minimum flash size */ -+ -+/* A boot/binary may have an embedded block that describes its size */ -+#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ -+#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ -+#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ -+#define BISZ_TXTST_IDX 1 /* 1: text start */ -+#define BISZ_TXTEND_IDX 2 /* 2: text start */ -+#define BISZ_DATAST_IDX 3 /* 3: text start */ -+#define BISZ_DATAEND_IDX 4 /* 4: text start */ -+#define BISZ_BSSST_IDX 5 /* 5: text start */ -+#define BISZ_BSSEND_IDX 6 /* 6: text start */ -+#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ ++/* iovar structure */ ++typedef struct bcm_iovar { ++ const char *name; /* name for lookup and display */ ++ uint16 varid; /* id for switch */ ++ uint16 flags; /* driver-specific flag bits */ ++ uint16 type; /* base type of argument */ ++ uint16 minlen; /* min length for buffer vars */ ++} bcm_iovar_t; ++ ++/* varid definitions are per-driver, may use these get/set bits */ ++ ++/* IOVar action bits for id mapping */ ++#define IOV_GET 0 /* Get an iovar */ ++#define IOV_SET 1 /* Set an iovar */ ++ ++/* Varid to actionid mapping */ ++#define IOV_GVAL(id) ((id)*2) ++#define IOV_SVAL(id) (((id)*2)+IOV_SET) ++#define IOV_ISSET(actionid) ((actionid & IOV_SET) == IOV_SET) ++ ++/* flags are per-driver based on driver attributes */ ++ ++/* Base type definitions */ ++#define IOVT_VOID 0 /* no value (implictly set only) */ ++#define IOVT_BOOL 1 /* any value ok (zero/nonzero) */ ++#define IOVT_INT8 2 /* integer values are range-checked */ ++#define IOVT_UINT8 3 /* unsigned int 8 bits */ ++#define IOVT_INT16 4 /* int 16 bits */ ++#define IOVT_UINT16 5 /* unsigned int 16 bits */ ++#define IOVT_INT32 6 /* int 32 bits */ ++#define IOVT_UINT32 7 /* unsigned int 32 bits */ ++#define IOVT_BUFFER 8 /* buffer is size-checked as per minlen */ ++ ++extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name); ++extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set); + -+#endif /* _SBCONFIG_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbextif.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbextif.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbextif.h 2005-12-16 23:39:10.932836000 +0100 -@@ -0,0 +1,242 @@ -+/* -+ * Hardware-specific External Interface I/O core definitions -+ * for the BCM47xx family of SiliconBackplane-based chips. -+ * -+ * The External Interface core supports a total of three external chip selects -+ * supporting external interfaces. One of the external chip selects is -+ * used for Flash, one is used for PCMCIA, and the other may be -+ * programmed to support either a synchronous interface or an -+ * asynchronous interface. The asynchronous interface can be used to -+ * support external devices such as UARTs and the BCM2019 Bluetooth -+ * baseband processor. -+ * The external interface core also contains 2 on-chip 16550 UARTs, clock -+ * frequency control, a watchdog interrupt timer, and a GPIO interface. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ ++#endif /* #ifdef BCMDRIVER */ + -+#ifndef _SBEXTIF_H -+#define _SBEXTIF_H ++/* ** driver/apps-shared section ** */ + -+/* external interface address space */ -+#define EXTIF_PCMCIA_MEMBASE(x) (x) -+#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) -+#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) -+#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) -+#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) ++#define BCME_STRLEN 64 /* Max string length for BCM errors */ ++#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) + -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ + +/* -+ * The multiple instances of output and output enable registers -+ * are present to allow driver software for multiple cores to control -+ * gpio outputs without needing to share a single register pair. -+ */ -+struct gpiouser { -+ uint32 out; -+ uint32 outen; -+}; -+#define NGPIOUSER 5 ++ * error codes could be added but the defined ones shouldn't be changed/deleted ++ * these error codes are exposed to the user code ++ * when ever a new error code is added to this list ++ * please update errorstring table with the related error string and ++ * update osl files with os specific errorcode map ++*/ + -+typedef volatile struct { -+ uint32 corecontrol; -+ uint32 extstatus; -+ uint32 PAD[2]; ++#define BCME_OK 0 /* Success */ ++#define BCME_ERROR -1 /* Error generic */ ++#define BCME_BADARG -2 /* Bad Argument */ ++#define BCME_BADOPTION -3 /* Bad option */ ++#define BCME_NOTUP -4 /* Not up */ ++#define BCME_NOTDOWN -5 /* Not down */ ++#define BCME_NOTAP -6 /* Not AP */ ++#define BCME_NOTSTA -7 /* Not STA */ ++#define BCME_BADKEYIDX -8 /* BAD Key Index */ ++#define BCME_RADIOOFF -9 /* Radio Off */ ++#define BCME_NOTBANDLOCKED -10 /* Not band locked */ ++#define BCME_NOCLK -11 /* No Clock */ ++#define BCME_BADRATESET -12 /* BAD Rate valueset */ ++#define BCME_BADBAND -13 /* BAD Band */ ++#define BCME_BUFTOOSHORT -14 /* Buffer too short */ ++#define BCME_BUFTOOLONG -15 /* Buffer too long */ ++#define BCME_BUSY -16 /* Busy */ ++#define BCME_NOTASSOCIATED -17 /* Not Associated */ ++#define BCME_BADSSIDLEN -18 /* Bad SSID len */ ++#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */ ++#define BCME_BADCHAN -20 /* Bad Channel */ ++#define BCME_BADADDR -21 /* Bad Address */ ++#define BCME_NORESOURCE -22 /* Not Enough Resources */ ++#define BCME_UNSUPPORTED -23 /* Unsupported */ ++#define BCME_BADLEN -24 /* Bad length */ ++#define BCME_NOTREADY -25 /* Not Ready */ ++#define BCME_EPERM -26 /* Not Permitted */ ++#define BCME_NOMEM -27 /* No Memory */ ++#define BCME_ASSOCIATED -28 /* Associated */ ++#define BCME_RANGE -29 /* Not In Range */ ++#define BCME_NOTFOUND -30 /* Not Found */ ++#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */ ++#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */ ++#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */ ++#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */ ++#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */ ++#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */ ++#define BCME_LAST BCME_DONGLE_DOWN ++ ++/* These are collection of BCME Error strings */ ++#define BCMERRSTRINGTABLE { \ ++ "OK", \ ++ "Undefined error", \ ++ "Bad Argument", \ ++ "Bad Option", \ ++ "Not up", \ ++ "Not down", \ ++ "Not AP", \ ++ "Not STA", \ ++ "Bad Key Index", \ ++ "Radio Off", \ ++ "Not band locked", \ ++ "No clock", \ ++ "Bad Rate valueset", \ ++ "Bad Band", \ ++ "Buffer too short", \ ++ "Buffer too long", \ ++ "Busy", \ ++ "Not Associated", \ ++ "Bad SSID len", \ ++ "Out of Range Channel", \ ++ "Bad Channel", \ ++ "Bad Address", \ ++ "Not Enough Resources", \ ++ "Unsupported", \ ++ "Bad length", \ ++ "Not Ready", \ ++ "Not Permitted", \ ++ "No Memory", \ ++ "Associated", \ ++ "Not In Range", \ ++ "Not Found", \ ++ "WME Not Enabled", \ ++ "TSPEC Not Found", \ ++ "ACM Not Supported", \ ++ "Not WME Association", \ ++ "SDIO Bus Error", \ ++ "Dongle Not Accessible" \ ++} + -+ /* pcmcia control registers */ -+ uint32 pcmcia_config; -+ uint32 pcmcia_memwait; -+ uint32 pcmcia_attrwait; -+ uint32 pcmcia_iowait; ++#ifndef ABS ++#define ABS(a) (((a) < 0)?-(a):(a)) ++#endif /* ABS */ + -+ /* programmable interface control registers */ -+ uint32 prog_config; -+ uint32 prog_waitcount; ++#ifndef MIN ++#define MIN(a, b) (((a) < (b))?(a):(b)) ++#endif /* MIN */ + -+ /* flash control registers */ -+ uint32 flash_config; -+ uint32 flash_waitcount; -+ uint32 PAD[4]; ++#ifndef MAX ++#define MAX(a, b) (((a) > (b))?(a):(b)) ++#endif /* MAX */ + -+ uint32 watchdog; ++#define CEIL(x, y) (((x) + ((y)-1)) / (y)) ++#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) ++#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) ++#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0) ++#define VALID_MASK(mask) !((mask) & ((mask) + 1)) ++#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) ++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) + -+ /* clock control */ -+ uint32 clockcontrol_n; -+ uint32 clockcontrol_sb; -+ uint32 clockcontrol_pci; -+ uint32 clockcontrol_mii; -+ uint32 PAD[3]; ++/* bit map related macros */ ++#ifndef setbit ++#ifndef NBBY /* the BSD family defines NBBY */ ++#define NBBY 8 /* 8 bits per byte */ ++#endif /* #ifndef NBBY */ ++#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) ++#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) ++#define isset(a, i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) ++#define isclr(a, i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) ++#endif /* setbit */ + -+ /* gpio */ -+ uint32 gpioin; -+ struct gpiouser gpio[NGPIOUSER]; -+ uint32 PAD; -+ uint32 ejtagouten; -+ uint32 gpiointpolarity; -+ uint32 gpiointmask; -+ uint32 PAD[153]; ++#define NBITS(type) (sizeof(type) * 8) ++#define NBITVAL(nbits) (1 << (nbits)) ++#define MAXBITVAL(nbits) ((1 << (nbits)) - 1) ++#define NBITMASK(nbits) MAXBITVAL(nbits) ++#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8) + -+ uint8 uartdata; -+ uint8 PAD[3]; -+ uint8 uartimer; -+ uint8 PAD[3]; -+ uint8 uartfcr; -+ uint8 PAD[3]; -+ uint8 uartlcr; -+ uint8 PAD[3]; -+ uint8 uartmcr; -+ uint8 PAD[3]; -+ uint8 uartlsr; -+ uint8 PAD[3]; -+ uint8 uartmsr; -+ uint8 PAD[3]; -+ uint8 uartscratch; -+ uint8 PAD[3]; -+} extifregs_t; ++/* basic mux operation - can be optimized on several architectures */ ++#define MUX(pred, true, false) ((pred) ? (true) : (false)) + -+/* corecontrol */ -+#define CC_UE (1 << 0) /* uart enable */ ++/* modulo inc/dec - assumes x E [0, bound - 1] */ ++#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1) ++#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1) + -+/* extstatus */ -+#define ES_EM (1 << 0) /* endian mode (ro) */ -+#define ES_EI (1 << 1) /* external interrupt pin (ro) */ -+#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ ++/* modulo inc/dec, bound = 2^k */ ++#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1)) ++#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1)) + -+/* gpio bit mask */ -+#define GPIO_BIT0 (1 << 0) -+#define GPIO_BIT1 (1 << 1) -+#define GPIO_BIT2 (1 << 2) -+#define GPIO_BIT3 (1 << 3) -+#define GPIO_BIT4 (1 << 4) -+#define GPIO_BIT5 (1 << 5) -+#define GPIO_BIT6 (1 << 6) -+#define GPIO_BIT7 (1 << 7) ++/* modulo add/sub - assumes x, y E [0, bound - 1] */ ++#define MODADD(x, y, bound) \ ++ MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y)) ++#define MODSUB(x, y, bound) \ ++ MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y)) + ++/* module add/sub, bound = 2^k */ ++#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1)) ++#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1)) + -+/* pcmcia/prog/flash_config */ -+#define CF_EN (1 << 0) /* enable */ -+#define CF_EM_MASK 0xe /* mode */ -+#define CF_EM_SHIFT 1 -+#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ -+#define CF_EM_SYNC 0x2 /* synchronous mode */ -+#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ -+#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ -+#define CF_BS (1 << 5) /* byteswap */ -+#define CF_CD_MASK 0xc0 /* clock divider */ -+#define CF_CD_SHIFT 6 -+#define CF_CD_DIV2 0x0 /* backplane/2 */ -+#define CF_CD_DIV3 0x40 /* backplane/3 */ -+#define CF_CD_DIV4 0x80 /* backplane/4 */ -+#define CF_CE (1 << 8) /* clock enable */ -+#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ ++/* crc defines */ ++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ ++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ ++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ ++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ + -+/* pcmcia_memwait */ -+#define PM_W0_MASK 0x3f /* waitcount0 */ -+#define PM_W1_MASK 0x1f00 /* waitcount1 */ -+#define PM_W1_SHIFT 8 -+#define PM_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PM_W2_SHIFT 16 -+#define PM_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PM_W3_SHIFT 24 ++/* bcm_format_flags() bit description structure */ ++typedef struct bcm_bit_desc { ++ uint32 bit; ++ char* name; ++} bcm_bit_desc_t; + -+/* pcmcia_attrwait */ -+#define PA_W0_MASK 0x3f /* waitcount0 */ -+#define PA_W1_MASK 0x1f00 /* waitcount1 */ -+#define PA_W1_SHIFT 8 -+#define PA_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PA_W2_SHIFT 16 -+#define PA_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PA_W3_SHIFT 24 ++/* tag_ID/length/value_buffer tuple */ ++typedef struct bcm_tlv { ++ uint8 id; ++ uint8 len; ++ uint8 data[1]; ++} bcm_tlv_t; + -+/* pcmcia_iowait */ -+#define PI_W0_MASK 0x3f /* waitcount0 */ -+#define PI_W1_MASK 0x1f00 /* waitcount1 */ -+#define PI_W1_SHIFT 8 -+#define PI_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PI_W2_SHIFT 16 -+#define PI_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PI_W3_SHIFT 24 ++/* Check that bcm_tlv_t fits into the given buflen */ ++#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) + -+/* prog_waitcount */ -+#define PW_W0_MASK 0x0000001f /* waitcount0 */ -+#define PW_W1_MASK 0x00001f00 /* waitcount1 */ -+#define PW_W1_SHIFT 8 -+#define PW_W2_MASK 0x001f0000 /* waitcount2 */ -+#define PW_W2_SHIFT 16 -+#define PW_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PW_W3_SHIFT 24 -+ -+#define PW_W0 0x0000000c -+#define PW_W1 0x00000a00 -+#define PW_W2 0x00020000 -+#define PW_W3 0x01000000 -+ -+/* flash_waitcount */ -+#define FW_W0_MASK 0x1f /* waitcount0 */ -+#define FW_W1_MASK 0x1f00 /* waitcount1 */ -+#define FW_W1_SHIFT 8 -+#define FW_W2_MASK 0x1f0000 /* waitcount2 */ -+#define FW_W2_SHIFT 16 -+#define FW_W3_MASK 0x1f000000 /* waitcount3 */ -+#define FW_W3_SHIFT 24 -+ -+/* watchdog */ -+#define WATCHDOG_CLOCK 48000000 /* Hz */ -+ -+/* clockcontrol_n */ -+#define CN_N1_MASK 0x3f /* n1 control */ -+#define CN_N2_MASK 0x3f00 /* n2 control */ -+#define CN_N2_SHIFT 8 -+ -+/* clockcontrol_sb/pci/mii */ -+#define CC_M1_MASK 0x3f /* m1 control */ -+#define CC_M2_MASK 0x3f00 /* m2 control */ -+#define CC_M2_SHIFT 8 -+#define CC_M3_MASK 0x3f0000 /* m3 control */ -+#define CC_M3_SHIFT 16 -+#define CC_MC_MASK 0x1f000000 /* mux control */ -+#define CC_MC_SHIFT 24 -+ -+/* Clock control default values */ -+#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ -+#define CC_DEF_100 0x04020011 -+#define CC_DEF_33 0x11030011 -+#define CC_DEF_25 0x11050011 ++/* buffer length for ethernet address from bcm_ether_ntoa() */ ++#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */ + -+/* Clock control values for 125Mhz */ -+#define CC_125_N 0x0802 -+#define CC_125_M 0x04020009 -+#define CC_125_M25 0x11090009 -+#define CC_125_M33 0x11090005 ++/* unaligned load and store macros */ ++#ifdef IL_BIGENDIAN ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); ++} + -+/* Clock control magic field values */ -+#define CC_F6_2 0x02 /* A factor of 2 in */ -+#define CC_F6_3 0x03 /* 6-bit fields like */ -+#define CC_F6_4 0x05 /* N1, M1 or M3 */ -+#define CC_F6_5 0x09 -+#define CC_F6_6 0x11 -+#define CC_F6_7 0x21 ++static INLINE void ++store32_ua(uint8 *a, uint32 v) ++{ ++ a[0] = (v >> 24) & 0xff; ++ a[1] = (v >> 16) & 0xff; ++ a[2] = (v >> 8) & 0xff; ++ a[3] = v & 0xff; ++} + -+#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[0] << 8) | a[1]); ++} + -+#define CC_MC_BYPASS 0x08 -+#define CC_MC_M1 0x04 -+#define CC_MC_M1M2 0x02 -+#define CC_MC_M1M2M3 0x01 -+#define CC_MC_M1M3 0x11 ++static INLINE void ++store16_ua(uint8 *a, uint16 v) ++{ ++ a[0] = (v >> 8) & 0xff; ++ a[1] = v & 0xff; ++} + -+#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ ++#else + -+#endif /* _SBEXTIF_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbhnddma.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbhnddma.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbhnddma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbhnddma.h 2005-12-16 23:39:10.932836000 +0100 -@@ -0,0 +1,312 @@ -+/* -+ * Generic Broadcom Home Networking Division (HND) DMA engine HW interface -+ * This supports the following chips: BCM42xx, 44xx, 47xx . -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); ++} + -+#ifndef _sbhnddma_h_ -+#define _sbhnddma_h_ ++static INLINE void ++store32_ua(uint8 *a, uint32 v) ++{ ++ a[3] = (v >> 24) & 0xff; ++ a[2] = (v >> 16) & 0xff; ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} + -+ -+/* 2byte-wide pio register set per channel(xmt or rcv) */ -+typedef volatile struct { -+ uint16 fifocontrol; -+ uint16 fifodata; -+ uint16 fifofree; /* only valid in xmt channel, not in rcv channel */ -+ uint16 PAD; -+} pio2regs_t; ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[1] << 8) | a[0]); ++} + -+/* a pair of pio channels(tx and rx) */ -+typedef volatile struct { -+ pio2regs_t tx; -+ pio2regs_t rx; -+} pio2regp_t; ++static INLINE void ++store16_ua(uint8 *a, uint16 v) ++{ ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} + -+/* 4byte-wide pio register set per channel(xmt or rcv) */ -+typedef volatile struct { -+ uint32 fifocontrol; -+ uint32 fifodata; -+} pio4regs_t; ++#endif /* IL_BIGENDIAN */ + -+/* a pair of pio channels(tx and rx) */ -+typedef volatile struct { -+ pio4regs_t tx; -+ pio4regs_t rx; -+} pio4regp_t; ++/* externs */ ++/* crc */ ++extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc); ++extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc); ++extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc); ++/* format/print */ ++extern void printfbig(char *buf); + ++/* IE parsing */ ++extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); ++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); ++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); + ++/* bcmerror */ ++extern const char *bcmerrorstr(int bcmerror); + -+/* DMA structure: -+ * support two DMA engines: 32 bits address or 64 bit addressing -+ * basic DMA register set is per channel(transmit or receive) -+ * a pair of channels is defined for convenience -+ */ ++/* multi-bool data type: set of bools, mbool is true if any is set */ ++typedef uint32 mbool; ++#define mboolset(mb, bit) (mb |= bit) /* set one bool */ ++#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */ ++#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */ ++#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) + ++/* power conversion */ ++extern uint16 bcm_qdbm_to_mw(uint8 qdbm); ++extern uint8 bcm_mw_to_qdbm(uint16 mw); + -+/*** 32 bits addressing ***/ ++/* generic datastruct to help dump routines */ ++struct fielddesc { ++ char *nameandfmt; ++ uint32 offset; ++ uint32 len; ++}; + -+/* dma registers per channel(xmt or rcv) */ -+typedef volatile struct { -+ uint32 control; /* enable, et al */ -+ uint32 addr; /* descriptor ring base address (4K aligned) */ -+ uint32 ptr; /* last descriptor posted to chip */ -+ uint32 status; /* current active descriptor, et al */ -+} dma32regs_t; ++/* Buffer structure for collecting string-formatted data ++* using bcm_bprintf() API. ++* Use bcm_binit() to initialize before use ++*/ ++struct bcmstrbuf ++{ ++ char *buf; /* pointer to current position in origbuf */ ++ uint size; /* current (residual) size in bytes */ ++ char *origbuf; /* unmodified pointer to orignal buffer */ ++ uint origsize; /* unmodified orignal buffer size in bytes */ ++}; + -+typedef volatile struct { -+ dma32regs_t xmt; /* dma tx channel */ -+ dma32regs_t rcv; /* dma rx channel */ -+} dma32regp_t; ++extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size); ++extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...); + -+typedef volatile struct { /* diag access */ -+ uint32 fifoaddr; /* diag address */ -+ uint32 fifodatalow; /* low 32bits of data */ -+ uint32 fifodatahigh; /* high 32bits of data */ -+ uint32 pad; /* reserved */ -+} dma32diag_t; ++typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset); ++extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, ++ char *buf, uint32 bufsize); + -+/* -+ * DMA Descriptor -+ * Descriptors are only read by the hardware, never written back. -+ */ -+typedef volatile struct { -+ uint32 ctrl; /* misc control bits & bufcount */ -+ uint32 addr; /* data buffer address */ -+} dma32dd_t; ++extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); ++extern uint bcm_bitcount(uint8 *bitmap, uint bytelength); + ++#endif /* _bcmutils_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/hndcpu.h linux.dev/arch/mips/bcm947xx/include/hndcpu.h +--- linux.old/arch/mips/bcm947xx/include/hndcpu.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/hndcpu.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,28 @@ +/* -+ * Each descriptor ring must be 4096byte aligned, and fit within a single 4096byte page. ++ * HND SiliconBackplane MIPS/ARM cores software interface. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: hndcpu.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ + */ -+#define D32MAXRINGSZ 4096 -+#define D32RINGALIGN 4096 -+#define D32MAXDD (D32MAXRINGSZ / sizeof (dma32dd_t)) -+ -+/* transmit channel control */ -+#define XC_XE ((uint32)1 << 0) /* transmit enable */ -+#define XC_SE ((uint32)1 << 1) /* transmit suspend request */ -+#define XC_LE ((uint32)1 << 2) /* loopback enable */ -+#define XC_FL ((uint32)1 << 4) /* flush request */ -+#define XC_AE ((uint32)3 << 16) /* address extension bits */ -+#define XC_AE_SHIFT 16 -+ -+/* transmit descriptor table pointer */ -+#define XP_LD_MASK 0xfff /* last valid descriptor */ -+ -+/* transmit channel status */ -+#define XS_CD_MASK 0x0fff /* current descriptor pointer */ -+#define XS_XS_MASK 0xf000 /* transmit state */ -+#define XS_XS_SHIFT 12 -+#define XS_XS_DISABLED 0x0000 /* disabled */ -+#define XS_XS_ACTIVE 0x1000 /* active */ -+#define XS_XS_IDLE 0x2000 /* idle wait */ -+#define XS_XS_STOPPED 0x3000 /* stopped */ -+#define XS_XS_SUSP 0x4000 /* suspend pending */ -+#define XS_XE_MASK 0xf0000 /* transmit errors */ -+#define XS_XE_SHIFT 16 -+#define XS_XE_NOERR 0x00000 /* no error */ -+#define XS_XE_DPE 0x10000 /* descriptor protocol error */ -+#define XS_XE_DFU 0x20000 /* data fifo underrun */ -+#define XS_XE_BEBR 0x30000 /* bus error on buffer read */ -+#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */ -+#define XS_AD_MASK 0xfff00000 /* active descriptor */ -+#define XS_AD_SHIFT 20 -+ -+/* receive channel control */ -+#define RC_RE ((uint32)1 << 0) /* receive enable */ -+#define RC_RO_MASK 0xfe /* receive frame offset */ -+#define RC_RO_SHIFT 1 -+#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */ -+#define RC_AE ((uint32)3 << 16) /* address extension bits */ -+#define RC_AE_SHIFT 16 -+ -+/* receive descriptor table pointer */ -+#define RP_LD_MASK 0xfff /* last valid descriptor */ -+ -+/* receive channel status */ -+#define RS_CD_MASK 0x0fff /* current descriptor pointer */ -+#define RS_RS_MASK 0xf000 /* receive state */ -+#define RS_RS_SHIFT 12 -+#define RS_RS_DISABLED 0x0000 /* disabled */ -+#define RS_RS_ACTIVE 0x1000 /* active */ -+#define RS_RS_IDLE 0x2000 /* idle wait */ -+#define RS_RS_STOPPED 0x3000 /* reserved */ -+#define RS_RE_MASK 0xf0000 /* receive errors */ -+#define RS_RE_SHIFT 16 -+#define RS_RE_NOERR 0x00000 /* no error */ -+#define RS_RE_DPE 0x10000 /* descriptor protocol error */ -+#define RS_RE_DFO 0x20000 /* data fifo overflow */ -+#define RS_RE_BEBW 0x30000 /* bus error on buffer write */ -+#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */ -+#define RS_AD_MASK 0xfff00000 /* active descriptor */ -+#define RS_AD_SHIFT 20 -+ -+/* fifoaddr */ -+#define FA_OFF_MASK 0xffff /* offset */ -+#define FA_SEL_MASK 0xf0000 /* select */ -+#define FA_SEL_SHIFT 16 -+#define FA_SEL_XDD 0x00000 /* transmit dma data */ -+#define FA_SEL_XDP 0x10000 /* transmit dma pointers */ -+#define FA_SEL_RDD 0x40000 /* receive dma data */ -+#define FA_SEL_RDP 0x50000 /* receive dma pointers */ -+#define FA_SEL_XFD 0x80000 /* transmit fifo data */ -+#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */ -+#define FA_SEL_RFD 0xc0000 /* receive fifo data */ -+#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */ -+#define FA_SEL_RSD 0xe0000 /* receive frame status data */ -+#define FA_SEL_RSP 0xf0000 /* receive frame status pointers */ -+ -+/* descriptor control flags */ -+#define CTRL_BC_MASK 0x1fff /* buffer byte count */ -+#define CTRL_AE ((uint32)3 << 16) /* address extension bits */ -+#define CTRL_AE_SHIFT 16 -+#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */ -+#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */ -+#define CTRL_EOF ((uint32)1 << 30) /* end of frame */ -+#define CTRL_SOF ((uint32)1 << 31) /* start of frame */ -+ -+/* control flags in the range [27:20] are core-specific and not defined here */ -+#define CTRL_CORE_MASK 0x0ff00000 -+ -+/*** 64 bits addressing ***/ -+ -+/* dma registers per channel(xmt or rcv) */ -+typedef volatile struct { -+ uint32 control; /* enable, et al */ -+ uint32 ptr; /* last descriptor posted to chip */ -+ uint32 addrlow; /* descriptor ring base address low 32-bits (8K aligned) */ -+ uint32 addrhigh; /* descriptor ring base address bits 63:32 (8K aligned) */ -+ uint32 status0; /* current descriptor, xmt state */ -+ uint32 status1; /* active descriptor, xmt error */ -+} dma64regs_t; + -+typedef volatile struct { -+ dma64regs_t tx; /* dma64 tx channel */ -+ dma64regs_t rx; /* dma64 rx channel */ -+} dma64regp_t; ++#ifndef _hndcpu_h_ ++#define _hndcpu_h_ + -+typedef volatile struct { /* diag access */ -+ uint32 fifoaddr; /* diag address */ -+ uint32 fifodatalow; /* low 32bits of data */ -+ uint32 fifodatahigh; /* high 32bits of data */ -+ uint32 pad; /* reserved */ -+} dma64diag_t; ++#if defined(mips) ++#include ++#elif defined(__ARM_ARCH_4T__) ++#include ++#endif + ++extern uint sb_irq(sb_t *sbh); ++extern uint32 sb_cpu_clock(sb_t *sbh); ++extern void sb_cpu_wait(void); ++ ++#endif /* _hndcpu_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h +--- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,45 @@ +/* -+ * DMA Descriptor -+ * Descriptors are only read by the hardware, never written back. ++ * HND SiliconBackplane MIPS core software interface. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: hndmips.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ + */ -+typedef volatile struct { -+ uint32 ctrl1; /* misc control bits & bufcount */ -+ uint32 ctrl2; /* buffer count and address extension */ -+ uint32 addrlow; /* memory address of the first byte of the date buffer, bits 31:0 */ -+ uint32 addrhigh; /* memory address of the first byte of the date buffer, bits 63:32 */ -+} dma64dd_t; + ++#ifndef _hndmips_h_ ++#define _hndmips_h_ ++ ++extern void sb_mips_init(sb_t *sbh, uint shirq_map_base); ++extern bool sb_mips_setclock(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); ++extern void enable_pfc(uint32 mode); ++extern uint32 sb_memc_get_ncdl(sb_t *sbh); ++ ++#if defined(BCMPERFSTATS) ++/* enable counting - exclusive version. Only one set of counters allowed at a time */ ++extern void hndmips_perf_instrcount_enable(void); ++extern void hndmips_perf_icachecount_enable(void); ++extern void hndmips_perf_dcachecount_enable(void); ++/* start and stop counting */ ++#define hndmips_perf_start01() \ ++ MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) | 0x80008000) ++#define hndmips_perf_stop01() \ ++ MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) & ~0x80008000) ++/* retrieve coutners - counters *decrement* */ ++#define hndmips_perf_read0() -(long)(MFC0(C0_PERFORMANCE, 0)) ++#define hndmips_perf_read1() -(long)(MFC0(C0_PERFORMANCE, 1)) ++#define hndmips_perf_read2() -(long)(MFC0(C0_PERFORMANCE, 2)) ++/* enable counting - modular version. Each counters can be enabled separately. */ ++extern void hndmips_perf_icache_hit_enable(void); ++extern void hndmips_perf_icache_miss_enable(void); ++extern uint32 hndmips_perf_read_instrcount(void); ++extern uint32 hndmips_perf_read_cache_miss(void); ++extern uint32 hndmips_perf_read_cache_hit(void); ++#endif /* defined(BCMINTERNAL) || defined (BCMPERFSTATS) */ ++ ++#endif /* _hndmips_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/hndpci.h linux.dev/arch/mips/bcm947xx/include/hndpci.h +--- linux.old/arch/mips/bcm947xx/include/hndpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/hndpci.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,30 @@ +/* -+ * Each descriptor ring must be 8kB aligned, and fit within a contiguous 8kB physical addresss. ++ * HND SiliconBackplane PCI core software interface. ++ * ++ * $Id: hndpci.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + */ -+#define D64MAXRINGSZ 8192 -+#define D64RINGALIGN 8192 -+#define D64MAXDD (D64MAXRINGSZ / sizeof (dma64dd_t)) -+ -+/* transmit channel control */ -+#define D64_XC_XE 0x00000001 /* transmit enable */ -+#define D64_XC_SE 0x00000002 /* transmit suspend request */ -+#define D64_XC_LE 0x00000004 /* loopback enable */ -+#define D64_XC_FL 0x00000010 /* flush request */ -+#define D64_XC_AE 0x00110000 /* address extension bits */ -+#define D64_XC_AE_SHIFT 16 -+ -+/* transmit descriptor table pointer */ -+#define D64_XP_LD_MASK 0x00000fff /* last valid descriptor */ -+ -+/* transmit channel status */ -+#define D64_XS0_CD_MASK 0x00001fff /* current descriptor pointer */ -+#define D64_XS0_XS_MASK 0xf0000000 /* transmit state */ -+#define D64_XS0_XS_SHIFT 28 -+#define D64_XS0_XS_DISABLED 0x00000000 /* disabled */ -+#define D64_XS0_XS_ACTIVE 0x10000000 /* active */ -+#define D64_XS0_XS_IDLE 0x20000000 /* idle wait */ -+#define D64_XS0_XS_STOPPED 0x30000000 /* stopped */ -+#define D64_XS0_XS_SUSP 0x40000000 /* suspend pending */ -+ -+#define D64_XS1_AD_MASK 0x0001ffff /* active descriptor */ -+#define D64_XS1_XE_MASK 0xf0000000 /* transmit errors */ -+#define D64_XS1_XE_SHIFT 28 -+#define D64_XS1_XE_NOERR 0x00000000 /* no error */ -+#define D64_XS1_XE_DPE 0x10000000 /* descriptor protocol error */ -+#define D64_XS1_XE_DFU 0x20000000 /* data fifo underrun */ -+#define D64_XS1_XE_DTE 0x30000000 /* data transfer error */ -+#define D64_XS1_XE_DESRE 0x40000000 /* descriptor read error */ -+#define D64_XS1_XE_COREE 0x50000000 /* core error */ -+ -+/* receive channel control */ -+#define D64_RC_RE 0x00000001 /* receive enable */ -+#define D64_RC_RO_MASK 0x000000fe /* receive frame offset */ -+#define D64_RC_RO_SHIFT 1 -+#define D64_RC_FM 0x00000100 /* direct fifo receive (pio) mode */ -+#define D64_RC_AE 0x00110000 /* address extension bits */ -+#define D64_RC_AE_SHIFT 16 -+ -+/* receive descriptor table pointer */ -+#define D64_RP_LD_MASK 0x00000fff /* last valid descriptor */ -+ -+/* receive channel status */ -+#define D64_RS0_CD_MASK 0x00001fff /* current descriptor pointer */ -+#define D64_RS0_RS_MASK 0xf0000000 /* receive state */ -+#define D64_RS0_RS_SHIFT 28 -+#define D64_RS0_RS_DISABLED 0x00000000 /* disabled */ -+#define D64_RS0_RS_ACTIVE 0x10000000 /* active */ -+#define D64_RS0_RS_IDLE 0x20000000 /* idle wait */ -+#define D64_RS0_RS_STOPPED 0x30000000 /* stopped */ -+#define D64_RS0_RS_SUSP 0x40000000 /* suspend pending */ -+ -+#define D64_RS1_AD_MASK 0x0001ffff /* active descriptor */ -+#define D64_RS1_RE_MASK 0xf0000000 /* receive errors */ -+#define D64_RS1_RE_SHIFT 28 -+#define D64_RS1_RE_NOERR 0x00000000 /* no error */ -+#define D64_RS1_RE_DPO 0x10000000 /* descriptor protocol error */ -+#define D64_RS1_RE_DFU 0x20000000 /* data fifo overflow */ -+#define D64_RS1_RE_DTE 0x30000000 /* data transfer error */ -+#define D64_RS1_RE_DESRE 0x40000000 /* descriptor read error */ -+#define D64_RS1_RE_COREE 0x50000000 /* core error */ -+ -+/* fifoaddr */ -+#define D64_FA_OFF_MASK 0xffff /* offset */ -+#define D64_FA_SEL_MASK 0xf0000 /* select */ -+#define D64_FA_SEL_SHIFT 16 -+#define D64_FA_SEL_XDD 0x00000 /* transmit dma data */ -+#define D64_FA_SEL_XDP 0x10000 /* transmit dma pointers */ -+#define D64_FA_SEL_RDD 0x40000 /* receive dma data */ -+#define D64_FA_SEL_RDP 0x50000 /* receive dma pointers */ -+#define D64_FA_SEL_XFD 0x80000 /* transmit fifo data */ -+#define D64_FA_SEL_XFP 0x90000 /* transmit fifo pointers */ -+#define D64_FA_SEL_RFD 0xc0000 /* receive fifo data */ -+#define D64_FA_SEL_RFP 0xd0000 /* receive fifo pointers */ -+#define D64_FA_SEL_RSD 0xe0000 /* receive frame status data */ -+#define D64_FA_SEL_RSP 0xf0000 /* receive frame status pointers */ -+ -+/* descriptor control flags 1 */ -+#define D64_CTRL1_EOT ((uint32)1 << 28) /* end of descriptor table */ -+#define D64_CTRL1_IOC ((uint32)1 << 29) /* interrupt on completion */ -+#define D64_CTRL1_EOF ((uint32)1 << 30) /* end of frame */ -+#define D64_CTRL1_SOF ((uint32)1 << 31) /* start of frame */ -+ -+/* descriptor control flags 2 */ -+#define D64_CTRL2_BC_MASK 0x00007fff /* buffer byte count mask */ -+#define D64_CTRL2_AE 0x00110000 /* address extension bits */ -+#define D64_CTRL2_AE_SHIFT 16 -+ -+/* control flags in the range [27:20] are core-specific and not defined here */ -+#define D64_CTRL_CORE_MASK 0x0ff00000 -+ -+ -+#endif /* _sbhnddma_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbmemc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbmemc.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbmemc.h 2005-12-16 23:39:10.932836000 +0100 -@@ -0,0 +1,148 @@ ++ ++#ifndef _hndpci_h_ ++#define _hndpci_h_ ++ ++extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, ++ int len); ++extern int extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, ++ int len); ++extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, ++ int len); ++extern int extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, ++ int len); ++extern void sbpci_ban(uint16 core); ++extern int sbpci_init(sb_t *sbh); ++extern int sbpci_init_pci(sb_t *sbh); ++extern void sbpci_check(sb_t *sbh); ++ ++#endif /* _hndpci_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h +--- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,417 @@ +/* -+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. ++ * Linux-specific abstractions to gain some independence from linux kernel versions. ++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. + * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id$ ++ * $Id: linuxver.h,v 1.1.1.10 2006/02/27 03:43:16 honor Exp $ + */ + -+#ifndef _SBMEMC_H -+#define _SBMEMC_H ++#ifndef _linuxver_h_ ++#define _linuxver_h_ + -+#ifdef _LANGUAGE_ASSEMBLY ++#include ++#include + -+#define MEMC_CONTROL 0x00 -+#define MEMC_CONFIG 0x04 -+#define MEMC_REFRESH 0x08 -+#define MEMC_BISTSTAT 0x0c -+#define MEMC_MODEBUF 0x10 -+#define MEMC_BKCLS 0x14 -+#define MEMC_PRIORINV 0x18 -+#define MEMC_DRAMTIM 0x1c -+#define MEMC_INTSTAT 0x20 -+#define MEMC_INTMASK 0x24 -+#define MEMC_INTINFO 0x28 -+#define MEMC_NCDLCTL 0x30 -+#define MEMC_RDNCDLCOR 0x34 -+#define MEMC_WRNCDLCOR 0x38 -+#define MEMC_MISCDLYCTL 0x3c -+#define MEMC_DQSGATENCDL 0x40 -+#define MEMC_SPARE 0x44 -+#define MEMC_TPADDR 0x48 -+#define MEMC_TPDATA 0x4c -+#define MEMC_BARRIER 0x50 -+#define MEMC_CORE 0x54 ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0)) ++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ ++#ifdef __UNDEF_NO_VERSION__ ++#undef __NO_VERSION__ ++#else ++#define __NO_VERSION__ ++#endif ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0) */ ++ ++#if defined(MODULE) && defined(MODVERSIONS) ++#include ++#endif + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 0) ++#include ++#endif ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0) ++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") ++#define module_param_string(_name_, _string_, _size_, _perm_) \ ++ MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) ++#endif + ++/* linux/malloc.h is deprecated, use linux/slab.h instead. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9)) ++#include +#else ++#include ++#endif + -+/* Sonics side: MEMC core registers */ -+typedef volatile struct sbmemcregs { -+ uint32 control; -+ uint32 config; -+ uint32 refresh; -+ uint32 biststat; -+ uint32 modebuf; -+ uint32 bkcls; -+ uint32 priorinv; -+ uint32 dramtim; -+ uint32 intstat; -+ uint32 intmask; -+ uint32 intinfo; -+ uint32 reserved1; -+ uint32 ncdlctl; -+ uint32 rdncdlcor; -+ uint32 wrncdlcor; -+ uint32 miscdlyctl; -+ uint32 dqsgatencdl; -+ uint32 spare; -+ uint32 tpaddr; -+ uint32 tpdata; -+ uint32 barrier; -+ uint32 core; -+} sbmemcregs_t; ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41)) ++#include ++#else ++#include ++#ifndef work_struct ++#define work_struct tq_struct +#endif ++#ifndef INIT_WORK ++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) ++#endif ++#ifndef schedule_work ++#define schedule_work(_work) schedule_task((_work)) ++#endif ++#ifndef flush_scheduled_work ++#define flush_scheduled_work() flush_scheduled_tasks() ++#endif ++#endif /* LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41) */ + -+/* MEMC Core Init values (OCP ID 0x80f) */ -+ -+/* For sdr: */ -+#define MEMC_SD_CONFIG_INIT 0x00048000 -+#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 -+#define MEMC_SD_DRAMTIM3_INIT 0x000754da -+#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 -+#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 -+#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ -+#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b -+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ -+#define MEMC_SD_CONTROL_INIT0 0x00000002 -+#define MEMC_SD_CONTROL_INIT1 0x00000008 -+#define MEMC_SD_CONTROL_INIT2 0x00000004 -+#define MEMC_SD_CONTROL_INIT3 0x00000010 -+#define MEMC_SD_CONTROL_INIT4 0x00000001 -+#define MEMC_SD_MODEBUF_INIT 0x00000000 -+#define MEMC_SD_REFRESH_INIT 0x0000840f -+ -+ -+/* This is for SDRM8X8X4 */ -+#define MEMC_SDR_INIT 0x0008 -+#define MEMC_SDR_MODE 0x32 -+#define MEMC_SDR_NCDL 0x00020032 -+#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0)) ++/* Some distributions have their own 2.6.x compatibility layers */ ++#ifndef IRQ_NONE ++typedef void irqreturn_t; ++#define IRQ_NONE ++#define IRQ_HANDLED ++#define IRQ_RETVAL(x) ++#endif ++#else ++typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0) */ + -+/* For ddr: */ -+#define MEMC_CONFIG_INIT 0x00048000 -+#define MEMC_DRAMTIM2_INIT 0x000754d8 -+#define MEMC_DRAMTIM25_INIT 0x000754d9 -+#define MEMC_RDNCDLCOR_INIT 0x00000000 -+#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */ -+#define MEMC_WRNCDLCOR_INIT 0x49351200 -+#define MEMC_1_WRNCDLCOR_INIT 0x14500200 -+#define MEMC_DQSGATENCDL_INIT 0x00030000 -+#define MEMC_MISCDLYCTL_INIT 0x21061c1b -+#define MEMC_1_MISCDLYCTL_INIT 0x21021400 -+#define MEMC_NCDLCTL_INIT 0x00002001 -+#define MEMC_CONTROL_INIT0 0x00000002 -+#define MEMC_CONTROL_INIT1 0x00000008 -+#define MEMC_MODEBUF_INIT0 0x00004000 -+#define MEMC_CONTROL_INIT2 0x00000010 -+#define MEMC_MODEBUF_INIT1 0x00000100 -+#define MEMC_CONTROL_INIT3 0x00000010 -+#define MEMC_CONTROL_INIT4 0x00000008 -+#define MEMC_REFRESH_INIT 0x0000840f -+#define MEMC_CONTROL_INIT5 0x00000004 -+#define MEMC_MODEBUF_INIT2 0x00000000 -+#define MEMC_CONTROL_INIT6 0x00000010 -+#define MEMC_CONTROL_INIT7 0x00000001 ++#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) + ++#include ++#include ++#include ++#include ++#include ++#include + -+/* This is for DDRM16X16X2 */ -+#define MEMC_DDR_INIT 0x0009 -+#define MEMC_DDR_MODE 0x62 -+#define MEMC_DDR_NCDL 0x0005050a -+#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 69)) ++/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which ++ * does this, but it's not in 2.4 so we do our own for now. ++ */ ++static inline void ++cs_error(client_handle_t handle, int func, int ret) ++{ ++ error_info_t err = { func, ret }; ++ CardServices(ReportError, handle, &err); ++} ++#endif + -+/* mask for sdr/ddr calibration registers */ -+#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff -+#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff -+#define MEMC_DQSGATENCDL_G_MASK 0x000000ff ++#endif /* CONFIG_PCMCIA */ + -+/* masks for miscdlyctl registers */ -+#define MEMC_MISC_SM_MASK 0x30000000 -+#define MEMC_MISC_SM_SHIFT 28 -+#define MEMC_MISC_SD_MASK 0x0f000000 -+#define MEMC_MISC_SD_SHIFT 24 ++#ifndef __exit ++#define __exit ++#endif ++#ifndef __devexit ++#define __devexit ++#endif ++#ifndef __devinit ++#define __devinit __init ++#endif ++#ifndef __devinitdata ++#define __devinitdata ++#endif ++#ifndef __devexit_p ++#define __devexit_p(x) x ++#endif + -+/* hw threshhold for calculating wr/rd for sdr memc */ -+#define MEMC_CD_THRESHOLD 128 ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0)) + -+/* Low bit of init register says if memc is ddr or sdr */ -+#define MEMC_CONFIG_DDR 0x00000001 ++#define pci_get_drvdata(dev) (dev)->sysdata ++#define pci_set_drvdata(dev, value) (dev)->sysdata = (value) + -+#endif /* _SBMEMC_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbmips.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbmips.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbmips.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,62 @@ +/* -+ * Broadcom SiliconBackplane MIPS definitions -+ * -+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane -+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits -+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP -+ * interface. The core revision is stored in the SB ID register in SB -+ * configuration space. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration + */ + -+#ifndef _SBMIPS_H -+#define _SBMIPS_H ++struct pci_device_id { ++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ ++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ ++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ ++ unsigned long driver_data; /* Data private to the driver */ ++}; + -+#include ++struct pci_driver { ++ struct list_head node; ++ char *name; ++ const struct pci_device_id *id_table; /* NULL if wants all devices */ ++ int (*probe)(struct pci_dev *dev, ++ const struct pci_device_id *id); /* New device inserted */ ++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug ++ * capable driver) ++ */ ++ void (*suspend)(struct pci_dev *dev); /* Device suspended */ ++ void (*resume)(struct pci_dev *dev); /* Device woken up */ ++}; + -+#ifndef _LANGUAGE_ASSEMBLY ++#define MODULE_DEVICE_TABLE(type, name) ++#define PCI_ANY_ID (~0) + -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ ++/* compatpci.c */ ++#define pci_module_init pci_register_driver ++extern int pci_register_driver(struct pci_driver *drv); ++extern void pci_unregister_driver(struct pci_driver *drv); + -+typedef volatile struct { -+ uint32 corecontrol; -+ uint32 PAD[2]; -+ uint32 biststatus; -+ uint32 PAD[4]; -+ uint32 intstatus; -+ uint32 intmask; -+ uint32 timer; -+} mipsregs_t; ++#endif /* PCI registration */ + -+extern uint32 sb_flag(sb_t *sbh); -+extern uint sb_irq(sb_t *sbh); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18)) ++#ifdef MODULE ++#define module_init(x) int init_module(void) { return x(); } ++#define module_exit(x) void cleanup_module(void) { x(); } ++#else ++#define module_init(x) __initcall(x); ++#define module_exit(x) __exitcall(x); ++#endif ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18) */ + -+extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48)) ++#define list_for_each(pos, head) \ ++ for (pos = (head)->next; pos != (head); pos = pos->next) ++#endif + -+extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap); -+extern void sb_jtagm_disable(void *h); -+extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr); -+extern void BCMINIT(sb_mips_init)(sb_t *sbh); -+extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh); -+extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); -+extern void BCMINIT(enable_pfc)(uint32 mode); -+extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13)) ++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44)) ++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) ++#endif + ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23)) ++#define pci_enable_device(dev) do { } while (0) ++#endif + -+#endif /* _LANGUAGE_ASSEMBLY */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14)) ++#define net_device device ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42)) + -+#endif /* _SBMIPS_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbpcie.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbpcie.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbpcie.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbpcie.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,199 @@ +/* -+ * BCM43XX SiliconBackplane PCIE core hardware definitions. ++ * DMA mapping + * -+ * $Id: -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * See linux/Documentation/DMA-mapping.txt + */ + -+#ifndef _SBPCIE_H -+#define _SBPCIE_H -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) ++#ifndef PCI_DMA_TODEVICE ++#define PCI_DMA_TODEVICE 1 ++#define PCI_DMA_FROMDEVICE 2 +#endif + -+/* PCIE Enumeration space offsets*/ -+#define PCIE_CORE_CONFIG_OFFSET 0x0 -+#define PCIE_FUNC0_CONFIG_OFFSET 0x400 -+#define PCIE_FUNC1_CONFIG_OFFSET 0x500 -+#define PCIE_FUNC2_CONFIG_OFFSET 0x600 -+#define PCIE_FUNC3_CONFIG_OFFSET 0x700 -+#define PCIE_SPROM_SHADOW_OFFSET 0x800 -+#define PCIE_SBCONFIG_OFFSET 0xE00 ++typedef u32 dma_addr_t; + -+/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */ -+#define PCIE_BAR0_WINMAPCORE_OFFSET 0x0 -+#define PCIE_BAR0_EXTSPROM_OFFSET 0x1000 -+#define PCIE_BAR0_PCIECORE_OFFSET 0x2000 -+#define PCIE_BAR0_CCCOREREG_OFFSET 0x3000 ++/* Pure 2^n version of get_order */ ++static inline int get_order(unsigned long size) ++{ ++ int order; + -+/* SB side: PCIE core and host control registers */ -+typedef struct sbpcieregs { ++ size = (size-1) >> (PAGE_SHIFT-1); ++ order = -1; ++ do { ++ size >>= 1; ++ order++; ++ } while (size); ++ return order; ++} + -+ uint32 PAD[3]; -+ uint32 biststatus; /* bist Status: 0x00C*/ -+ uint32 PAD[6]; -+ uint32 sbtopcimailbox; /* sb to pcie mailbox: 0x028*/ -+ uint32 PAD[54]; -+ uint32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ -+ uint32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ -+ uint32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ -+ uint32 PAD[4]; ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, ++ dma_addr_t *dma_handle) ++{ ++ void *ret; ++ int gfp = GFP_ATOMIC | GFP_DMA; + -+ /* pcie core supports in direct access to config space */ -+ uint32 configaddr; /* pcie config space access: Address field: 0x120*/ -+ uint32 configdata; /* pcie config space access: Data field: 0x124*/ ++ ret = (void *)__get_free_pages(gfp, get_order(size)); + -+ /* mdio access to serdes */ -+ uint32 mdiocontrol; /* controls the mdio access: 0x128 */ -+ uint32 mdiodata; /* Data to the mdio access: 0x12c */ ++ if (ret != NULL) { ++ memset(ret, 0, size); ++ *dma_handle = virt_to_bus(ret); ++ } ++ return ret; ++} ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, ++ void *vaddr, dma_addr_t dma_handle) ++{ ++ free_pages((unsigned long)vaddr, get_order(size)); ++} ++#ifdef ILSIM ++extern uint pci_map_single(void *dev, void *va, uint size, int direction); ++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); ++#else ++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) ++#define pci_unmap_single(cookie, address, size, dir) ++#endif + -+ /* pcie protocol phy/dllp/tlp register access mechanism*/ -+ uint32 pcieaddr; /* address of the internal registeru: 0x130 */ -+ uint32 pciedata; /* Data to/from the internal regsiter: 0x134 */ ++#endif /* DMA mapping */ + -+ uint32 PAD[434]; -+ uint16 sprom[36]; /* SPROM shadow Area */ -+} sbpcieregs_t; ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43)) + -+/* SB to PCIE translation masks */ -+#define SBTOPCIE0_MASK 0xfc000000 -+#define SBTOPCIE1_MASK 0xfc000000 -+#define SBTOPCIE2_MASK 0xc0000000 ++#define dev_kfree_skb_any(a) dev_kfree_skb(a) ++#define netif_down(dev) do { (dev)->start = 0; } while (0) + -+/* Access type bits (0:1)*/ -+#define SBTOPCIE_MEM 0 -+#define SBTOPCIE_IO 1 -+#define SBTOPCIE_CFG0 2 -+#define SBTOPCIE_CFG1 3 ++/* pcmcia-cs provides its own netdevice compatibility layer */ ++#ifndef _COMPAT_NETDEVICE_H + -+/*Prefetch enable bit 2*/ -+#define SBTOPCIE_PF 4 ++/* ++ * SoftNet ++ * ++ * For pre-softnet kernels we need to tell the upper layer not to ++ * re-enter start_xmit() while we are in there. However softnet ++ * guarantees not to enter while we are in there so there is no need ++ * to do the netif_stop_queue() dance unless the transmit queue really ++ * gets stuck. This should also improve performance according to tests ++ * done by Aman Singla. ++ */ + -+/*Write Burst enable for memory write bit 3*/ -+#define SBTOPCIE_WR_BURST 8 ++#define dev_kfree_skb_irq(a) dev_kfree_skb(a) ++#define netif_wake_queue(dev) \ ++ do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0) ++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) + -+/* config access */ -+#define CONFIGADDR_FUNC_MASK 0x7000 -+#define CONFIGADDR_FUNC_SHF 12 -+#define CONFIGADDR_REG_MASK 0x0FFF -+#define CONFIGADDR_REG_SHF 0 ++static inline void netif_start_queue(struct net_device *dev) ++{ ++ dev->tbusy = 0; ++ dev->interrupt = 0; ++ dev->start = 1; ++} + -+/* PCIE protocol regs Indirect Address */ -+#define PCIEADDR_PROT_MASK 0x300 -+#define PCIEADDR_PROT_SHF 8 -+#define PCIEADDR_PL_TLP 0 -+#define PCIEADDR_PL_DLLP 1 -+#define PCIEADDR_PL_PLP 2 ++#define netif_queue_stopped(dev) (dev)->tbusy ++#define netif_running(dev) (dev)->start + -+/* PCIE protocol PHY diagnostic registers */ -+#define PCIE_PLP_MODEREG 0x200 /* Mode*/ -+#define PCIE_PLP_STATUSREG 0x204 /* Status*/ -+#define PCIE_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ -+#define PCIE_PLP_LTLINKNUMREG 0x20c /* Link Training Link number*/ -+#define PCIE_PLP_LTLANENUMREG 0x210 /* Link Training Lane number*/ -+#define PCIE_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ -+#define PCIE_PLP_ATTNREG 0x218 /* Attention */ -+#define PCIE_PLP_ATTNMASKREG 0x21C /* Attention Mask */ -+#define PCIE_PLP_RXERRCTR 0x220 /* Rx Error */ -+#define PCIE_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error*/ -+#define PCIE_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ -+#define PCIE_PLP_TESTCTRLREG 0x22C /* Test Control reg*/ -+#define PCIE_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ -+#define PCIE_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ -+#define PCIE_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag*/ -+#define PCIE_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag*/ ++#endif /* _COMPAT_NETDEVICE_H */ + -+/* PCIE protocol DLLP diagnostic registers */ -+#define PCIE_DLLP_LCREG 0x100 /* Link Control*/ -+#define PCIE_DLLP_LSREG 0x104 /* Link Status */ -+#define PCIE_DLLP_LAREG 0x108 /* Link Attention*/ -+#define PCIE_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ -+#define PCIE_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num*/ -+#define PCIE_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num*/ -+#define PCIE_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num*/ -+#define PCIE_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ -+#define PCIE_DLLP_LRREG 0x120 /* Link Replay*/ -+#define PCIE_DLLP_LACKTOREG 0x124 /* Link Ack Timeout*/ -+#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold*/ -+#define PCIE_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr*/ -+#define PCIE_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr*/ -+#define PCIE_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr*/ -+#define PCIE_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write*/ -+#define PCIE_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ -+#define PCIE_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ -+#define PCIE_DLLP_ERRCTRREG 0x144 /* Error Counter*/ -+#define PCIE_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter*/ -+#define PCIE_DLLP_TESTREG 0x14C /* Test */ -+#define PCIE_DLLP_PKTBIST 0x150 /* Packet BIST*/ ++#define netif_device_attach(dev) netif_start_queue(dev) ++#define netif_device_detach(dev) netif_stop_queue(dev) + -+/* PCIE protocol TLP diagnostic registers */ -+#define PCIE_TLP_CONFIGREG 0x000 /* Configuration */ -+#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ -+#define PCIE_TLP_WRDMAUPPER 0x010 /* Write DMA Upper Address*/ -+#define PCIE_TLP_WRDMALOWER 0x014 /* Write DMA Lower Address*/ -+#define PCIE_TLP_WRDMAREQ_LBEREG 0x018 /* Write DMA Len/ByteEn Req*/ -+#define PCIE_TLP_RDDMAUPPER 0x01C /* Read DMA Upper Address*/ -+#define PCIE_TLP_RDDMALOWER 0x020 /* Read DMA Lower Address*/ -+#define PCIE_TLP_RDDMALENREG 0x024 /* Read DMA Len Req*/ -+#define PCIE_TLP_MSIDMAUPPER 0x028 /* MSI DMA Upper Address*/ -+#define PCIE_TLP_MSIDMALOWER 0x02C /* MSI DMA Lower Address*/ -+#define PCIE_TLP_MSIDMALENREG 0x030 /* MSI DMA Len Req*/ -+#define PCIE_TLP_SLVREQLENREG 0x034 /* Slave Request Len*/ -+#define PCIE_TLP_FCINPUTSREQ 0x038 /* Flow Control Inputs*/ -+#define PCIE_TLP_TXSMGRSREQ 0x03C /* Tx StateMachine and Gated Req*/ -+#define PCIE_TLP_ADRACKCNTARBLEN 0x040 /* Address Ack XferCnt and ARB Len*/ -+#define PCIE_TLP_DMACPLHDR0 0x044 /* DMA Completion Hdr 0*/ -+#define PCIE_TLP_DMACPLHDR1 0x048 /* DMA Completion Hdr 1*/ -+#define PCIE_TLP_DMACPLHDR2 0x04C /* DMA Completion Hdr 2*/ -+#define PCIE_TLP_DMACPLMISC0 0x050 /* DMA Completion Misc0 */ -+#define PCIE_TLP_DMACPLMISC1 0x054 /* DMA Completion Misc1 */ -+#define PCIE_TLP_DMACPLMISC2 0x058 /* DMA Completion Misc2 */ -+#define PCIE_TLP_SPTCTRLLEN 0x05C /* Split Controller Req len*/ -+#define PCIE_TLP_SPTCTRLMSIC0 0x060 /* Split Controller Misc 0*/ -+#define PCIE_TLP_SPTCTRLMSIC1 0x064 /* Split Controller Misc 1*/ -+#define PCIE_TLP_BUSDEVFUNC 0x068 /* Bus/Device/Func*/ -+#define PCIE_TLP_RESETCTR 0x06C /* Reset Counter*/ -+#define PCIE_TLP_RTRYBUF 0x070 /* Retry Buffer value*/ -+#define PCIE_TLP_TGTDEBUG1 0x074 /* Target Debug Reg1*/ -+#define PCIE_TLP_TGTDEBUG2 0x078 /* Target Debug Reg2*/ -+#define PCIE_TLP_TGTDEBUG3 0x07C /* Target Debug Reg3*/ -+#define PCIE_TLP_TGTDEBUG4 0x080 /* Target Debug Reg4*/ ++/* 2.4.x renamed bottom halves to tasklets */ ++#define tasklet_struct tq_struct ++static inline void tasklet_schedule(struct tasklet_struct *tasklet) ++{ ++ queue_task(tasklet, &tq_immediate); ++ mark_bh(IMMEDIATE_BH); ++} + -+/* MDIO control */ -+#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -+#define MDIOCTL_DIVISOR_VAL 0x2 -+#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -+#define MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++static inline void tasklet_init(struct tasklet_struct *tasklet, ++ void (*func)(unsigned long), ++ unsigned long data) ++{ ++ tasklet->next = NULL; ++ tasklet->sync = 0; ++ tasklet->routine = (void (*)(void *))func; ++ tasklet->data = (void *)data; ++} ++#define tasklet_kill(tasklet) { do{} while (0); } + -+/* MDIO Data */ -+#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -+#define MDIODATA_TA 0x00020000 /* Turnaround */ -+#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -+#define MDIODATA_REGADDR_MASK 0x003c0000 /* Regaddr Mask */ -+#define MDIODATA_DEVADDR_SHF 22 /* Physmedia devaddr shift */ -+#define MDIODATA_DEVADDR_MASK 0x0fc00000 /* Physmedia devaddr Mask */ -+#define MDIODATA_WRITE 0x10000000 /* write Transaction */ -+#define MDIODATA_READ 0x20000000 /* Read Transaction */ -+#define MDIODATA_START 0x40000000 /* start of Transaction */ ++/* 2.4.x introduced del_timer_sync() */ ++#define del_timer_sync(timer) del_timer(timer) + -+/* MDIO devices (SERDES modules) */ -+#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -+#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -+#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#else + -+/* SERDES registers */ -+#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ -+#define SERDES_RX_CDR 6 /* CDR */ -+#define SERDES_RX_CDRBW 7 /* CDR BW */ ++#define netif_down(dev) ++ ++#endif /* SoftNet */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3)) + -+#endif /* _SBPCIE_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbpci.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbpci.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbpci.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,122 @@ +/* -+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. -+ * -+ * $Id$ -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Emit code to initialise a tq_struct's routine and data pointers + */ ++#define PREPARE_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ (_tq)->routine = _routine; \ ++ (_tq)->data = _data; \ ++ } while (0) + -+#ifndef _SBPCI_H -+#define _SBPCI_H ++/* ++ * Emit code to initialise all of a tq_struct ++ */ ++#define INIT_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ INIT_LIST_HEAD(&(_tq)->list); \ ++ (_tq)->sync = 0; \ ++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ ++ } while (0) + -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3) */ + -+/* Sonics side: PCI core and host control registers */ -+typedef struct sbpciregs { -+ uint32 control; /* PCI control */ -+ uint32 PAD[3]; -+ uint32 arbcontrol; /* PCI arbiter control */ -+ uint32 PAD[3]; -+ uint32 intstatus; /* Interrupt status */ -+ uint32 intmask; /* Interrupt mask */ -+ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ -+ uint32 PAD[9]; -+ uint32 bcastaddr; /* Sonics broadcast address */ -+ uint32 bcastdata; /* Sonics broadcast data */ -+ uint32 PAD[2]; -+ uint32 gpioin; /* ro: gpio input (>=rev2) */ -+ uint32 gpioout; /* rw: gpio output (>=rev2) */ -+ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ -+ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ -+ uint32 PAD[36]; -+ uint32 sbtopci0; /* Sonics to PCI translation 0 */ -+ uint32 sbtopci1; /* Sonics to PCI translation 1 */ -+ uint32 sbtopci2; /* Sonics to PCI translation 2 */ -+ uint32 PAD[445]; -+ uint16 sprom[36]; /* SPROM shadow Area */ -+ uint32 PAD[46]; -+} sbpciregs_t; ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6)) + -+/* PCI control */ -+#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ -+#define PCI_RST 0x02 /* Value driven out to pin */ -+#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ -+#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ ++/* Power management related routines */ + -+/* PCI arbiter control */ -+#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ -+#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ -+#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */ -+#define PCI_PARKID_SHIFT 1 -+#define PCI_PARKID_LAST 0 /* Last requestor */ -+#define PCI_PARKID_4710 1 /* 4710 */ -+#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */ -+#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */ ++static inline int ++pci_save_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_read_config_dword(dev, i * 4, &buffer[i]); ++ } ++ return 0; ++} + -+/* Interrupt status/mask */ -+#define PCI_INTA 0x01 /* PCI INTA# is asserted */ -+#define PCI_INTB 0x02 /* PCI INTB# is asserted */ -+#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ -+#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ -+#define PCI_PME 0x10 /* PCI PME# is asserted */ ++static inline int ++pci_restore_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; + -+/* (General) PCI/SB mailbox interrupts, two bits per pci function */ -+#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ -+#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ -+#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ -+#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ -+#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ -+#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ -+#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ -+#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_write_config_dword(dev, i * 4, buffer[i]); ++ } ++ /* ++ * otherwise, write the context information we know from bootup. ++ * This works around a problem where warm-booting from Windows ++ * combined with a D3(hot)->D0 transition causes PCI config ++ * header data to be forgotten. ++ */ ++ else { ++ for (i = 0; i < 6; i ++) ++ pci_write_config_dword(dev, ++ PCI_BASE_ADDRESS_0 + (i * 4), ++ pci_resource_start(dev, i)); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ } ++ return 0; ++} + -+/* Sonics broadcast address */ -+#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ -+ -+/* Sonics to PCI translation types */ -+#define SBTOPCI0_MASK 0xfc000000 -+#define SBTOPCI1_MASK 0xfc000000 -+#define SBTOPCI2_MASK 0xc0000000 -+#define SBTOPCI_MEM 0 -+#define SBTOPCI_IO 1 -+#define SBTOPCI_CFG0 2 -+#define SBTOPCI_CFG1 3 -+#define SBTOPCI_PREF 0x4 /* prefetch enable */ -+#define SBTOPCI_BURST 0x8 /* burst enable */ -+#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */ -+#define SBTOPCI_RC_READ 0x00 /* memory read */ -+#define SBTOPCI_RC_READLINE 0x10 /* memory read line */ -+#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ ++#endif /* PCI power management */ + -+/* PCI core index in SROM shadow area */ -+#define SRSH_PI_OFFSET 0 /* first word */ -+#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ -+#define SRSH_PI_SHIFT 12 /* bit 15:12 */ ++/* Old cp0 access macros deprecated in 2.4.19 */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19)) ++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) ++#endif + -+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ -+#define cap_list rsvd_a[0] -+#define bar0_window dev_dep[0x80 - 0x40] -+#define bar1_window dev_dep[0x84 - 0x40] -+#define sprom_control dev_dep[0x88 - 0x40] ++/* Module refcount handled internally in 2.6.x */ ++#ifndef SET_MODULE_OWNER ++#define SET_MODULE_OWNER(dev) do {} while (0) ++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT ++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT ++#else ++#define OLD_MOD_INC_USE_COUNT do {} while (0) ++#define OLD_MOD_DEC_USE_COUNT do {} while (0) ++#endif + -+#ifndef _LANGUAGE_ASSEMBLY ++#ifndef SET_NETDEV_DEV ++#define SET_NETDEV_DEV(net, pdev) do {} while (0) ++#endif + -+extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); -+extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); -+extern void sbpci_ban(uint16 core); -+extern int sbpci_init(sb_t *sbh); -+extern void sbpci_check(sb_t *sbh); ++#ifndef HAVE_FREE_NETDEV ++#define free_netdev(dev) kfree(dev) ++#endif + -+#endif /* !_LANGUAGE_ASSEMBLY */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0)) ++/* struct packet_type redefined in 2.6.x */ ++#define af_packet_priv data ++#endif + -+#endif /* _SBPCI_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbpcmcia.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbpcmcia.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbpcmcia.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,146 @@ ++#endif /* _linuxver_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h +--- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,541 @@ +/* -+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. ++ * HND Run Time Environment for standalone MIPS programs. + * -+ * $Id$ -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: mipsinc.h,v 1.1.1.5 2006/02/27 03:43:16 honor Exp $ + */ + -+#ifndef _SBPCMCIA_H -+#define _SBPCMCIA_H -+ ++#ifndef _MISPINC_H ++#define _MISPINC_H + -+/* All the addresses that are offsets in attribute space are divided -+ * by two to account for the fact that odd bytes are invalid in -+ * attribute space and our read/write routines make the space appear -+ * as if they didn't exist. Still we want to show the original numbers -+ * as documented in the hnd_pcmcia core manual. -+ */ + -+/* PCMCIA Function Configuration Registers */ -+#define PCMCIA_FCR (0x700 / 2) ++/* MIPS defines */ + -+#define FCR0_OFF 0 -+#define FCR1_OFF (0x40 / 2) -+#define FCR2_OFF (0x80 / 2) -+#define FCR3_OFF (0xc0 / 2) ++#ifdef _LANGUAGE_ASSEMBLY + -+#define PCMCIA_FCR0 (0x700 / 2) -+#define PCMCIA_FCR1 (0x740 / 2) -+#define PCMCIA_FCR2 (0x780 / 2) -+#define PCMCIA_FCR3 (0x7c0 / 2) ++/* ++ * Symbolic register names for 32 bit ABI ++ */ ++#define zero $0 /* wired zero */ ++#define AT $1 /* assembler temp - uppercase because of ".set at" */ ++#define v0 $2 /* return value */ ++#define v1 $3 ++#define a0 $4 /* argument registers */ ++#define a1 $5 ++#define a2 $6 ++#define a3 $7 ++#define t0 $8 /* caller saved */ ++#define t1 $9 ++#define t2 $10 ++#define t3 $11 ++#define t4 $12 ++#define t5 $13 ++#define t6 $14 ++#define t7 $15 ++#define s0 $16 /* callee saved */ ++#define s1 $17 ++#define s2 $18 ++#define s3 $19 ++#define s4 $20 ++#define s5 $21 ++#define s6 $22 ++#define s7 $23 ++#define t8 $24 /* caller saved */ ++#define t9 $25 ++#define jp $25 /* PIC jump register */ ++#define k0 $26 /* kernel scratch */ ++#define k1 $27 ++#define gp $28 /* global pointer */ ++#define sp $29 /* stack pointer */ ++#define fp $30 /* frame pointer */ ++#define s8 $30 /* same like fp! */ ++#define ra $31 /* return address */ + -+/* Standard PCMCIA FCR registers */ + -+#define PCMCIA_COR 0 ++/* CP0 Registers */ + -+#define COR_RST 0x80 -+#define COR_LEV 0x40 -+#define COR_IRQEN 0x04 -+#define COR_BLREN 0x01 -+#define COR_FUNEN 0x01 ++#define C0_INX $0 ++#define C0_RAND $1 ++#define C0_TLBLO0 $2 ++#define C0_TLBLO C0_TLBLO0 ++#define C0_TLBLO1 $3 ++#define C0_CTEXT $4 ++#define C0_PGMASK $5 ++#define C0_WIRED $6 ++#define C0_BADVADDR $8 ++#define C0_COUNT $9 ++#define C0_TLBHI $10 ++#define C0_COMPARE $11 ++#define C0_SR $12 ++#define C0_STATUS C0_SR ++#define C0_CAUSE $13 ++#define C0_EPC $14 ++#define C0_PRID $15 ++#define C0_CONFIG $16 ++#define C0_LLADDR $17 ++#define C0_WATCHLO $18 ++#define C0_WATCHHI $19 ++#define C0_XCTEXT $20 ++#define C0_DIAGNOSTIC $22 ++#define C0_BROADCOM C0_DIAGNOSTIC ++#define C0_PERFORMANCE $25 ++#define C0_ECC $26 ++#define C0_CACHEERR $27 ++#define C0_TAGLO $28 ++#define C0_TAGHI $29 ++#define C0_ERREPC $30 ++#define C0_DESAVE $31 + ++/* ++ * LEAF - declare leaf routine ++ */ ++#define LEAF(symbol) \ ++ .globl symbol; \ ++ .align 2; \ ++ .type symbol, @function; \ ++ .ent symbol, 0; \ ++symbol: .frame sp, 0, ra + -+#define PCICIA_FCSR (2 / 2) -+#define PCICIA_PRR (4 / 2) -+#define PCICIA_SCR (6 / 2) -+#define PCICIA_ESR (8 / 2) ++/* ++ * END - mark end of function ++ */ ++#define END(function) \ ++ .end function; \ ++ .size function, . - function + ++#define _ULCAST_ + -+#define PCM_MEMOFF 0x0000 -+#define F0_MEMOFF 0x1000 -+#define F1_MEMOFF 0x2000 -+#define F2_MEMOFF 0x3000 -+#define F3_MEMOFF 0x4000 ++#define MFC0_SEL(dst, src, sel) \ ++ .word\t(0x40000000 | ((dst) << 16) | ((src) << 11) | (sel)) + -+/* Memory base in the function fcr's */ -+#define MEM_ADDR0 (0x728 / 2) -+#define MEM_ADDR1 (0x72a / 2) -+#define MEM_ADDR2 (0x72c / 2) + -+/* PCMCIA base plus Srom access in fcr0: */ -+#define PCMCIA_ADDR0 (0x072e / 2) -+#define PCMCIA_ADDR1 (0x0730 / 2) -+#define PCMCIA_ADDR2 (0x0732 / 2) ++#define MTC0_SEL(dst, src, sel) \ ++ .word\t(0x40800000 | ((dst) << 16) | ((src) << 11) | (sel)) + -+#define MEM_SEG (0x0734 / 2) -+#define SROM_CS (0x0736 / 2) -+#define SROM_DATAL (0x0738 / 2) -+#define SROM_DATAH (0x073a / 2) -+#define SROM_ADDRL (0x073c / 2) -+#define SROM_ADDRH (0x073e / 2) ++#else + -+/* Values for srom_cs: */ -+#define SROM_IDLE 0 -+#define SROM_WRITE 1 -+#define SROM_READ 2 -+#define SROM_WEN 4 -+#define SROM_WDS 7 -+#define SROM_DONE 8 ++/* ++ * The following macros are especially useful for __asm__ ++ * inline assembler. ++ */ ++#ifndef __STR ++#define __STR(x) #x ++#endif ++#ifndef STR ++#define STR(x) __STR(x) ++#endif + -+/* CIS stuff */ ++#define _ULCAST_ (unsigned long) + -+/* The CIS stops where the FCRs start */ -+#define CIS_SIZE PCMCIA_FCR + -+/* Standard tuples we know about */ ++/* CP0 Registers */ + -+#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ -+#define CISTPL_FUNCE 0x22 /* Function extensions */ -+#define CISTPL_CFTABLE 0x1b /* Config table entry */ ++#define C0_INX 0 /* CP0: TLB Index */ ++#define C0_RAND 1 /* CP0: TLB Random */ ++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ ++#define C0_CTEXT 4 /* CP0: Context */ ++#define C0_PGMASK 5 /* CP0: TLB PageMask */ ++#define C0_WIRED 6 /* CP0: TLB Wired */ ++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ ++#define C0_COUNT 9 /* CP0: Count */ ++#define C0_TLBHI 10 /* CP0: TLB EntryHi */ ++#define C0_COMPARE 11 /* CP0: Compare */ ++#define C0_SR 12 /* CP0: Processor Status */ ++#define C0_STATUS C0_SR /* CP0: Processor Status */ ++#define C0_CAUSE 13 /* CP0: Exception Cause */ ++#define C0_EPC 14 /* CP0: Exception PC */ ++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ ++#define C0_CONFIG 16 /* CP0: Config */ ++#define C0_LLADDR 17 /* CP0: LLAddr */ ++#define C0_WATCHLO 18 /* CP0: WatchpointLo */ ++#define C0_WATCHHI 19 /* CP0: WatchpointHi */ ++#define C0_XCTEXT 20 /* CP0: XContext */ ++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ ++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ ++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ ++#define C0_ECC 26 /* CP0: ECC */ ++#define C0_CACHEERR 27 /* CP0: CacheErr */ ++#define C0_TAGLO 28 /* CP0: TagLo */ ++#define C0_TAGHI 29 /* CP0: TagHi */ ++#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++#define C0_DESAVE 31 /* CP0: DebugSave */ + -+/* Function extensions for LANs */ ++#endif /* _LANGUAGE_ASSEMBLY */ + -+#define LAN_TECH 1 /* Technology type */ -+#define LAN_SPEED 2 /* Raw bit rate */ -+#define LAN_MEDIA 3 /* Transmission media */ -+#define LAN_NID 4 /* Node identification (aka MAC addr) */ -+#define LAN_CONN 5 /* Connector standard */ -+ -+ -+/* CFTable */ -+#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ -+#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ -+#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ -+ -+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll -+ * take one for HNBU, and use "extensions" (a la FUNCE) within it. ++/* ++ * Memory segments (32bit kernel mode addresses) + */ ++#undef KUSEG ++#undef KSEG0 ++#undef KSEG1 ++#undef KSEG2 ++#undef KSEG3 ++#define KUSEG 0x00000000 ++#define KSEG0 0x80000000 ++#define KSEG1 0xa0000000 ++#define KSEG2 0xc0000000 ++#define KSEG3 0xe0000000 ++#define PHYSADDR_MASK 0x1fffffff + -+#define CISTPL_BRCM_HNBU 0x80 -+ -+/* Subtypes of BRCM_HNBU: */ -+ -+#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */ -+#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor & -+ * device id and chiprev -+ */ -+#define HNBU_BOARDREV 0x02 /* Two bytes board revision */ -+#define HNBU_PAPARMS 0x03 /* PA parameters: 1 (old), 8 (sreomrev == 1) -+ * or 9 (sromrev > 1) bytes */ -+#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */ -+#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */ -+#define HNBU_AA 0x06 /* Antennas available */ -+#define HNBU_AG 0x07 /* Antenna gain */ -+#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */ -+#define HNBU_LEDS 0x09 /* LED set */ -+#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl) -+ * in rev 2 -+ */ -+#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */ -+#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */ -+ -+ -+/* sbtmstatelow */ -+#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ -+#define SBTML_INT_EN 0x20000 /* enable sb interrupt */ -+ -+/* sbtmstatehigh */ -+#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ -+ -+#endif /* _SBPCMCIA_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbsdram.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbsdram.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbsdram.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,75 @@ +/* -+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Map an address to a certain kernel segment + */ ++#undef PHYSADDR ++#undef KSEG0ADDR ++#undef KSEG1ADDR ++#undef KSEG2ADDR ++#undef KSEG3ADDR + -+#ifndef _SBSDRAM_H -+#define _SBSDRAM_H -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* Sonics side: SDRAM core registers */ -+typedef volatile struct sbsdramregs { -+ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ -+ uint32 config; /* Initializes external SDRAM mode register */ -+ uint32 refresh; /* Controls external SDRAM refresh rate */ -+ uint32 pad1; -+ uint32 pad2; -+} sbsdramregs_t; -+ -+#endif -+ -+/* SDRAM initialization control (initcontrol) register bits */ -+#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ -+#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ -+#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ -+#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ -+#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ -+#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ -+#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ -+#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ -+#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ -+#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ -+#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ -+#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ -+#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ -+ -+/* SDRAM configuration (config) register bits */ -+#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ -+#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ -+#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ -+#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ -+#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ -+#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ -+ -+/* SDRAM refresh control (refresh) register bits */ -+#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ -+#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ -+ -+/* SDRAM Core default Init values (OCP ID 0x803) */ -+#define SDRAM_INIT MEM4MX16X2 -+#define SDRAM_CONFIG SDRAM_BURSTFULL -+#define SDRAM_REFRESH SDRAM_REF(0x40) ++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) ++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) ++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) ++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) ++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) + -+#define MEM1MX16 0x009 /* 2 MB */ -+#define MEM1MX16X2 0x409 /* 4 MB */ -+#define MEM2MX8X2 0x809 /* 4 MB */ -+#define MEM2MX8X4 0xc09 /* 8 MB */ -+#define MEM2MX32 0x439 /* 8 MB */ -+#define MEM4MX16 0x019 /* 8 MB */ -+#define MEM4MX16X2 0x419 /* 16 MB */ -+#define MEM8MX8X2 0x819 /* 16 MB */ -+#define MEM8MX16 0x829 /* 16 MB */ -+#define MEM4MX32 0x429 /* 16 MB */ -+#define MEM8MX8X4 0xc19 /* 32 MB */ -+#define MEM8MX16X2 0xc29 /* 32 MB */ + -+#endif /* _SBSDRAM_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbsocram.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbsocram.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbsocram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbsocram.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,37 @@ ++#ifndef Index_Invalidate_I +/* -+ * BCM47XX Sonics SiliconBackplane embedded ram core -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * Cache Operations + */ ++#define Index_Invalidate_I 0x00 ++#define Index_Writeback_Inv_D 0x01 ++#define Index_Invalidate_SI 0x02 ++#define Index_Writeback_Inv_SD 0x03 ++#define Index_Load_Tag_I 0x04 ++#define Index_Load_Tag_D 0x05 ++#define Index_Load_Tag_SI 0x06 ++#define Index_Load_Tag_SD 0x07 ++#define Index_Store_Tag_I 0x08 ++#define Index_Store_Tag_D 0x09 ++#define Index_Store_Tag_SI 0x0A ++#define Index_Store_Tag_SD 0x0B ++#define Create_Dirty_Excl_D 0x0d ++#define Create_Dirty_Excl_SD 0x0f ++#define Hit_Invalidate_I 0x10 ++#define Hit_Invalidate_D 0x11 ++#define Hit_Invalidate_SI 0x12 ++#define Hit_Invalidate_SD 0x13 ++#define Fill_I 0x14 ++#define Hit_Writeback_Inv_D 0x15 ++ /* 0x16 is unused */ ++#define Hit_Writeback_Inv_SD 0x17 ++#define R5K_Page_Invalidate_S 0x17 ++#define Hit_Writeback_I 0x18 ++#define Hit_Writeback_D 0x19 ++ /* 0x1a is unused */ ++#define Hit_Writeback_SD 0x1b ++ /* 0x1c is unused */ ++ /* 0x1e is unused */ ++#define Hit_Set_Virtual_SI 0x1e ++#define Hit_Set_Virtual_SD 0x1f ++#endif /* !Index_Invalidate_I */ + -+#ifndef _SBSOCRAM_H -+#define _SBSOCRAM_H -+ -+#define SOCRAM_MEMSIZE 0x00 -+#define SOCRAM_BISTSTAT 0x0c -+ -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* Memcsocram core registers */ -+typedef volatile struct sbsocramregs { -+ uint32 memsize; -+ uint32 biststat; -+} sbsocramregs_t; -+ -+#endif + -+/* Them memory size is 2 to the power of the following -+ * base added to the contents of the memsize register. ++/* ++ * R4x00 interrupt enable / cause bits + */ -+#define SOCRAM_MEMSIZE_BASESHIFT 16 ++#define IE_SW0 (_ULCAST_(1) << 8) ++#define IE_SW1 (_ULCAST_(1) << 9) ++#define IE_IRQ0 (_ULCAST_(1) << 10) ++#define IE_IRQ1 (_ULCAST_(1) << 11) ++#define IE_IRQ2 (_ULCAST_(1) << 12) ++#define IE_IRQ3 (_ULCAST_(1) << 13) ++#define IE_IRQ4 (_ULCAST_(1) << 14) ++#define IE_IRQ5 (_ULCAST_(1) << 15) + -+#endif /* _SBSOCRAM_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbutils.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbutils.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbutils.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,140 @@ ++#ifndef ST0_UM +/* -+ * Misc utility routines for accessing chip-specific features -+ * of Broadcom HNBU SiliconBackplane-based chips. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * Bitfields in the mips32 cp0 status register + */ ++#define ST0_IE 0x00000001 ++#define ST0_EXL 0x00000002 ++#define ST0_ERL 0x00000004 ++#define ST0_UM 0x00000010 ++#define ST0_SWINT0 0x00000100 ++#define ST0_SWINT1 0x00000200 ++#define ST0_HWINT0 0x00000400 ++#define ST0_HWINT1 0x00000800 ++#define ST0_HWINT2 0x00001000 ++#define ST0_HWINT3 0x00002000 ++#define ST0_HWINT4 0x00004000 ++#define ST0_HWINT5 0x00008000 ++#define ST0_IM 0x0000ff00 ++#define ST0_NMI 0x00080000 ++#define ST0_SR 0x00100000 ++#define ST0_TS 0x00200000 ++#define ST0_BEV 0x00400000 ++#define ST0_RE 0x02000000 ++#define ST0_RP 0x08000000 ++#define ST0_CU 0xf0000000 ++#define ST0_CU0 0x10000000 ++#define ST0_CU1 0x20000000 ++#define ST0_CU2 0x40000000 ++#define ST0_CU3 0x80000000 ++#endif /* !ST0_UM */ + -+#ifndef _sbutils_h_ -+#define _sbutils_h_ -+ -+/* -+ * Datastructure to export all chip specific common variables -+ * public (read-only) portion of sbutils handle returned by -+ * sb_attach()/sb_kattach() -+*/ -+ -+struct sb_pub { -+ -+ uint bustype; /* SB_BUS, PCI_BUS */ -+ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE*/ -+ uint buscorerev; /* buscore rev */ -+ uint buscoreidx; /* buscore index */ -+ int ccrev; /* chip common core rev */ -+ uint boardtype; /* board type */ -+ uint boardvendor; /* board vendor */ -+ uint chip; /* chip number */ -+ uint chiprev; /* chip revision */ -+ uint chippkg; /* chip package option */ -+ uint sonicsrev; /* sonics backplane rev */ -+}; -+ -+typedef const struct sb_pub sb_t; + +/* -+ * Many of the routines below take an 'sbh' handle as their first arg. -+ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). -+ * At any one time, the sbh is logically focused on one particular sb core -+ * (the "current core"). -+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. ++ * Bitfields in the mips32 cp0 cause register + */ ++#define C_EXC 0x0000007c ++#define C_EXC_SHIFT 2 ++#define C_INT 0x0000ff00 ++#define C_INT_SHIFT 8 ++#define C_SW0 (_ULCAST_(1) << 8) ++#define C_SW1 (_ULCAST_(1) << 9) ++#define C_IRQ0 (_ULCAST_(1) << 10) ++#define C_IRQ1 (_ULCAST_(1) << 11) ++#define C_IRQ2 (_ULCAST_(1) << 12) ++#define C_IRQ3 (_ULCAST_(1) << 13) ++#define C_IRQ4 (_ULCAST_(1) << 14) ++#define C_IRQ5 (_ULCAST_(1) << 15) ++#define C_WP 0x00400000 ++#define C_IV 0x00800000 ++#define C_CE 0x30000000 ++#define C_CE_SHIFT 28 ++#define C_BD 0x80000000 + -+/* exported externs */ -+extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); -+extern sb_t * BCMINIT(sb_kattach)(void); -+extern void sb_detach(sb_t *sbh); -+extern uint BCMINIT(sb_chip)(sb_t *sbh); -+extern uint BCMINIT(sb_chiprev)(sb_t *sbh); -+extern uint BCMINIT(sb_chipcrev)(sb_t *sbh); -+extern uint BCMINIT(sb_chippkg)(sb_t *sbh); -+extern uint BCMINIT(sb_pcirev)(sb_t *sbh); -+extern bool BCMINIT(sb_war16165)(sb_t *sbh); -+extern uint BCMINIT(sb_pcmciarev)(sb_t *sbh); -+extern uint BCMINIT(sb_boardvendor)(sb_t *sbh); -+extern uint BCMINIT(sb_boardtype)(sb_t *sbh); -+extern uint sb_bus(sb_t *sbh); -+extern uint sb_buscoretype(sb_t *sbh); -+extern uint sb_buscorerev(sb_t *sbh); -+extern uint sb_corelist(sb_t *sbh, uint coreid[]); -+extern uint sb_coreid(sb_t *sbh); -+extern uint sb_coreidx(sb_t *sbh); -+extern uint sb_coreunit(sb_t *sbh); -+extern uint sb_corevendor(sb_t *sbh); -+extern uint sb_corerev(sb_t *sbh); -+extern void *sb_osh(sb_t *sbh); -+extern void *sb_coreregs(sb_t *sbh); -+extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val); -+extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val); -+extern bool sb_iscoreup(sb_t *sbh); -+extern void *sb_setcoreidx(sb_t *sbh, uint coreidx); -+extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit); -+extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit); -+extern void sb_commit(sb_t *sbh); -+extern uint32 sb_base(uint32 admatch); -+extern uint32 sb_size(uint32 admatch); -+extern void sb_core_reset(sb_t *sbh, uint32 bits); -+extern void sb_core_tofixup(sb_t *sbh); -+extern void sb_core_disable(sb_t *sbh, uint32 bits); -+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); -+extern uint32 sb_clock(sb_t *sbh); -+extern void sb_pci_setup(sb_t *sbh, uint coremask); -+extern void sb_pcmcia_init(sb_t *sbh); -+extern void sb_watchdog(sb_t *sbh, uint ticks); -+extern void *sb_gpiosetcore(sb_t *sbh); -+extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioin(sb_t *sbh); -+extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); -+extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority); -+extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority); -+ -+extern void sb_clkctl_init(sb_t *sbh); -+extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh); -+extern bool sb_clkctl_clk(sb_t *sbh, uint mode); -+extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on); -+extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, -+ void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg); -+extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to); -+extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, -+ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif); -+extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset); -+extern uint sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val); -+extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val); -+ ++/* Values in C_EXC */ ++#define EXC_INT 0 ++#define EXC_TLBM 1 ++#define EXC_TLBL 2 ++#define EXC_TLBS 3 ++#define EXC_AEL 4 ++#define EXC_AES 5 ++#define EXC_IBE 6 ++#define EXC_DBE 7 ++#define EXC_SYS 8 ++#define EXC_BPT 9 ++#define EXC_RI 10 ++#define EXC_CU 11 ++#define EXC_OV 12 ++#define EXC_TR 13 ++#define EXC_WATCH 23 ++#define EXC_MCHK 24 + + +/* -+* Build device path. Path size must be >= SB_DEVPATH_BUFSZ. -+* The returned path is NULL terminated and has trailing '/'. -+* Return 0 on success, nonzero otherwise. -+*/ -+extern int sb_devpath(sb_t *sbh, char *path, int size); -+ -+/* clkctl xtal what flags */ -+#define XTAL 0x1 /* primary crystal oscillator (2050) */ -+#define PLL 0x2 /* main chip pll */ -+ -+/* clkctl clk mode */ -+#define CLK_FAST 0 /* force fast (pll) clock */ -+#define CLK_DYNAMIC 2 /* enable dynamic clock control */ -+ -+ -+/* GPIO usage priorities */ -+#define GPIO_DRV_PRIORITY 0 -+#define GPIO_APP_PRIORITY 1 ++ * Bits in the cp0 config register. ++ */ ++#define CONF_CM_CACHABLE_NO_WA 0 ++#define CONF_CM_CACHABLE_WA 1 ++#define CONF_CM_UNCACHED 2 ++#define CONF_CM_CACHABLE_NONCOHERENT 3 ++#define CONF_CM_CACHABLE_CE 4 ++#define CONF_CM_CACHABLE_COW 5 ++#define CONF_CM_CACHABLE_CUW 6 ++#define CONF_CM_CACHABLE_ACCELERATED 7 ++#define CONF_CM_CMASK 7 ++#define CONF_CU (_ULCAST_(1) << 3) ++#define CONF_DB (_ULCAST_(1) << 4) ++#define CONF_IB (_ULCAST_(1) << 5) ++#define CONF_SE (_ULCAST_(1) << 12) ++#ifndef CONF_BE /* duplicate in mipsregs.h */ ++#define CONF_BE (_ULCAST_(1) << 15) ++#endif ++#define CONF_SC (_ULCAST_(1) << 17) ++#define CONF_AC (_ULCAST_(1) << 23) ++#define CONF_HALT (_ULCAST_(1) << 25) ++#ifndef CONF_M /* duplicate in mipsregs.h */ ++#define CONF_M (_ULCAST_(1) << 31) ++#endif + -+/* device path */ -+#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ + -+#endif /* _sbutils_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sflash.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sflash.h ---- linux-2.4.32/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sflash.h 2005-12-16 23:39:10.936836250 +0100 -@@ -0,0 +1,36 @@ +/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * Bits in the cp0 config register select 1. + */ ++#define CONF1_FP 0x00000001 /* FPU present */ ++#define CONF1_EP 0x00000002 /* EJTAG present */ ++#define CONF1_CA 0x00000004 /* mips16 implemented */ ++#define CONF1_WR 0x00000008 /* Watch registers present */ ++#define CONF1_PC 0x00000010 /* Performance counters present */ ++#define CONF1_DA_SHIFT 7 /* D$ associativity */ ++#define CONF1_DA_MASK 0x00000380 ++#define CONF1_DA_BASE 1 ++#define CONF1_DL_SHIFT 10 /* D$ line size */ ++#define CONF1_DL_MASK 0x00001c00 ++#define CONF1_DL_BASE 2 ++#define CONF1_DS_SHIFT 13 /* D$ sets/way */ ++#define CONF1_DS_MASK 0x0000e000 ++#define CONF1_DS_BASE 64 ++#define CONF1_IA_SHIFT 16 /* I$ associativity */ ++#define CONF1_IA_MASK 0x00070000 ++#define CONF1_IA_BASE 1 ++#define CONF1_IL_SHIFT 19 /* I$ line size */ ++#define CONF1_IL_MASK 0x00380000 ++#define CONF1_IL_BASE 2 ++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ ++#define CONF1_IS_MASK 0x01c00000 ++#define CONF1_IS_BASE 64 ++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ ++#define CONF1_MS_SHIFT 25 + -+#ifndef _sflash_h_ -+#define _sflash_h_ ++/* PRID register */ ++#define PRID_COPT_MASK 0xff000000 ++#define PRID_COMP_MASK 0x00ff0000 ++#define PRID_IMP_MASK 0x0000ff00 ++#define PRID_REV_MASK 0x000000ff + -+#include -+#include ++#define PRID_COMP_LEGACY 0x000000 ++#define PRID_COMP_MIPS 0x010000 ++#define PRID_COMP_BROADCOM 0x020000 ++#define PRID_COMP_ALCHEMY 0x030000 ++#define PRID_COMP_SIBYTE 0x040000 ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++#define PRID_IMP_BCM3303 0x9100 + -+struct sflash { -+ uint blocksize; /* Block size */ -+ uint numblocks; /* Number of blocks */ -+ uint32 type; /* Type */ -+ uint size; /* Total size in bytes */ -+}; ++#define PRID_IMP_UNKNOWN 0xff00 + -+/* Utility functions */ -+extern int sflash_poll(chipcregs_t *cc, uint offset); -+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); -+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); -+extern int sflash_erase(chipcregs_t *cc, uint offset); -+extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); -+extern struct sflash * sflash_init(chipcregs_t *cc); ++#define BCM330X(id) \ ++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \ ++ (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) || \ ++ ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \ ++ (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) + -+#endif /* _sflash_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/trxhdr.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/trxhdr.h ---- linux-2.4.32/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/trxhdr.h 2005-12-16 23:39:10.940836500 +0100 -@@ -0,0 +1,33 @@ -+/* -+ * TRX image file header format. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++/* Bits in C0_BROADCOM */ ++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ ++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ ++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ ++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ ++#define BRCM_CLF_ENABLE 0x00100000 /* Enable cache line first feature */ + -+#include ++/* PreFetch Cache aka Read Ahead Cache */ + -+#define TRX_MAGIC 0x30524448 /* "HDR0" */ -+#define TRX_VERSION 1 -+#define TRX_MAX_LEN 0x3A0000 -+#define TRX_NO_HEADER 1 /* Do not write TRX header */ -+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ -+#define TRX_MAX_OFFSET 3 ++#define PFC_CR0 0xff400000 /* control reg 0 */ ++#define PFC_CR1 0xff400004 /* control reg 1 */ + -+struct trx_header { -+ uint32 magic; /* "HDR0" */ -+ uint32 len; /* Length of file including header */ -+ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ -+ uint32 flag_version; /* 0:15 flags, 16:31 version */ -+ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -+}; ++/* PFC operations */ ++#define PFC_I 0x00000001 /* Enable PFC use for instructions */ ++#define PFC_D 0x00000002 /* Enable PFC use for data */ ++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ ++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ ++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ ++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ ++#define PFC_DPF 0x00000040 /* Enable directional prefetching */ ++#define PFC_FLUSH 0x00000100 /* Flush the PFC */ ++#define PFC_BRR 0x40000000 /* Bus error indication */ ++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ ++ ++/* Handy defaults */ ++#define PFC_DISABLED 0 ++#define PFC_AUTO 0xffffffff /* auto select the default mode */ ++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) ++#define PFC_INST_NOPF (PFC_I | PFC_CINV) ++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) ++#define PFC_DATA_NOPF (PFC_D | PFC_CINV) ++#define PFC_I_AND_D (PFC_INST | PFC_DATA) ++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) ++ ++#ifndef _LANGUAGE_ASSEMBLY + -+/* Compatibility */ -+typedef struct trx_header TRXHDR, *PTRXHDR; -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/typedefs.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/typedefs.h ---- linux-2.4.32/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/typedefs.h 2005-12-16 23:39:10.940836500 +0100 -@@ -0,0 +1,326 @@ +/* -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Macros to access the system control coprocessor + */ + -+#ifndef _TYPEDEFS_H_ -+#define _TYPEDEFS_H_ ++#define MFC0(source, sel) \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__(" \ ++ .set\tnoreorder; \ ++ .set\tnoat; \ ++ .word\t"STR(0x40010000 | ((source) << 11) | (sel))"; \ ++ move\t%0, $1; \ ++ .set\tat; \ ++ .set\treorder" \ ++ :"=r" (__res) \ ++ : \ ++ :"$1"); \ ++ __res; \ ++}) + ++#define MTC0(source, sel, value) \ ++do { \ ++ __asm__ __volatile__(" \ ++ .set\tnoreorder; \ ++ .set\tnoat; \ ++ move\t$1, %z0; \ ++ .word\t"STR(0x40810000 | ((source) << 11) | (sel))"; \ ++ .set\tat; \ ++ .set\treorder" \ ++ : \ ++ :"jr" (value) \ ++ :"$1"); \ ++} while (0) + -+/* Define 'SITE_TYPEDEFS' in the compile to include a site specific -+ * typedef file "site_typedefs.h". -+ * -+ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" -+ * section of this file makes inferences about the compile environment -+ * based on defined symbols and possibly compiler pragmas. -+ * -+ * Following these two sections is the "Default Typedefs" -+ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is -+ * defined. This section has a default set of typedefs and a few -+ * proprocessor symbols (TRUE, FALSE, NULL, ...). -+ */ -+ -+#ifdef SITE_TYPEDEFS ++#define get_c0_count() \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__(" \ ++ .set\tnoreorder; \ ++ .set\tnoat; \ ++ mfc0\t%0, $9; \ ++ .set\tat; \ ++ .set\treorder" \ ++ :"=r" (__res)); \ ++ __res; \ ++}) + -+/******************************************************************************* -+ * Site Specific Typedefs -+ *******************************************************************************/ ++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; + -+#include "site_typedefs.h" ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) ++ lsz = CONF1_IL_BASE << lsz; ++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); ++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} + -+#else ++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; + -+/******************************************************************************* -+ * Inferred Typedefs -+ *******************************************************************************/ ++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) ++ lsz = CONF1_DL_BASE << lsz; ++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); ++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} + -+/* Infer the compile environment based on preprocessor symbols and pramas. -+ * Override type definitions as needed, and include configuration dependent -+ * header files to define types. -+ */ ++#define cache_op(base, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, (%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + -+#ifdef __cplusplus ++#define cache_unroll4(base, delta, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, 0(%0); \ ++ cache %1, delta(%0); \ ++ cache %1, (2 * delta)(%0); \ ++ cache %1, (3 * delta)(%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + -+#define TYPEDEF_BOOL -+#ifndef FALSE -+#define FALSE false -+#endif -+#ifndef TRUE -+#define TRUE true -+#endif ++#endif /* !_LANGUAGE_ASSEMBLY */ + -+#else /* ! __cplusplus */ ++#endif /* _MISPINC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h +--- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,181 @@ ++#ifndef __osl_h ++#define __osl_h + -+#if defined(_WIN32) ++#include ++#include ++#include ++#include ++#include + -+#define TYPEDEF_BOOL -+typedef unsigned char bool; /* consistent w/BOOL */ ++#define ASSERT(n) + -+#endif /* _WIN32 */ ++/* Pkttag flag should be part of public information */ ++typedef struct { ++ bool pkttag; ++ uint pktalloced; /* Number of allocated packet buffers */ ++ void *tx_fn; ++ void *tx_ctx; ++} osl_pubinfo_t; ++ ++struct osl_info { ++ osl_pubinfo_t pub; ++ uint magic; ++ void *pdev; ++ uint malloced; ++ uint failed; ++ void *dbgmem_list; ++}; + -+#endif /* ! __cplusplus */ ++typedef struct osl_info osl_t; + -+/* use the Windows ULONG_PTR type when compiling for 64 bit */ -+#if defined(_WIN64) -+#include -+#define TYPEDEF_UINTPTR -+typedef ULONG_PTR uintptr; -+#endif ++#define PCI_CFG_RETRY 10 + -+#ifdef _HNDRTE_ -+typedef long unsigned int size_t; -+#endif ++/* map/unmap direction */ ++#define DMA_TX 1 /* TX direction for DMA */ ++#define DMA_RX 2 /* RX direction for DMA */ + -+#ifdef _MSC_VER /* Microsoft C */ -+#define TYPEDEF_INT64 -+#define TYPEDEF_UINT64 -+typedef signed __int64 int64; -+typedef unsigned __int64 uint64; -+#endif ++#define AND_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) & (v)) ++#define OR_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) | (v)) ++#define SET_REG(osh, r, mask, val) W_REG((osh), (r), ((R_REG((osh), r) & ~(mask)) | (val))) + -+#if defined(MACOSX) && defined(KERNEL) -+#define TYPEDEF_BOOL -+#endif ++/* bcopy, bcmp, and bzero */ ++#define bcopy(src, dst, len) memcpy((dst), (src), (len)) ++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) ++#define bzero(b, len) memset((b), '\0', (len)) + ++/* uncached virtual address */ ++#ifdef mips ++#define OSL_UNCACHED(va) KSEG1ADDR((va)) ++#include ++#else ++#define OSL_UNCACHED(va) (va) ++#endif /* mips */ + -+#if defined(linux) -+#define TYPEDEF_UINT -+#define TYPEDEF_USHORT -+#define TYPEDEF_ULONG -+#endif + -+#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) -+#define TYPEDEF_UINT -+#define TYPEDEF_USHORT -+#endif ++#ifndef IL_BIGENDIAN ++#define R_REG(osh, r) (\ ++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ ++ readl((volatile uint32*)(r)) \ ++) ++#define W_REG(osh, r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#else /* IL_BIGENDIAN */ ++#define R_REG(osh, r) ({ \ ++ __typeof(*(r)) __osl_v; \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ ++ } \ ++ __osl_v; \ ++}) ++#define W_REG(osh, r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#endif /* IL_BIGENDIAN */ + ++/* dereference an address that may cause a bus exception */ ++#define BUSPROBE(val, addr) get_dbe((val), (addr)) ++#include + -+/* Do not support the (u)int64 types with strict ansi for GNU C */ -+#if defined(__GNUC__) && defined(__STRICT_ANSI__) -+#define TYPEDEF_INT64 -+#define TYPEDEF_UINT64 -+#endif ++/* map/unmap physical to virtual I/O */ ++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) ++#define REG_UNMAP(va) iounmap((void *)(va)) + -+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode -+ * for singned or unsigned */ -+#if defined(__ICL) ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) memset((r), '\0', (len)) + -+#define TYPEDEF_INT64 ++#define MALLOC(osh, size) kmalloc((size), GFP_ATOMIC) ++#define MFREE(osh, addr, size) kfree((addr)) ++#define MALLOCED(osh) (0) + -+#if defined(__STDC__) -+#define TYPEDEF_UINT64 -+#endif ++#define osl_delay OSL_DELAY ++static inline void OSL_DELAY(uint usec) ++{ ++ uint d; + -+#endif /* __ICL */ ++ while (usec > 0) { ++ d = MIN(usec, 1000); ++ udelay(d); ++ usec -= d; ++ } ++} + ++static inline void ++bcm_mdelay(uint ms) ++{ ++ uint i; + -+#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) ++ for (i = 0; i < ms; i++) { ++ OSL_DELAY(1000); ++ } ++} + -+/* pick up ushort & uint from standard types.h */ -+#if defined(linux) && defined(__KERNEL__) + -+#include /* sys/types.h and linux/types.h are oil and water */ ++#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) ++#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) + -+#else ++#define OSL_PCI_READ_CONFIG(osh, offset, size) \ ++ osl_pci_read_config((osh), (offset), (size)) + -+#include ++static inline uint32 ++osl_pci_read_config(osl_t *osh, uint offset, uint size) ++{ ++ uint val; ++ uint retry = PCI_CFG_RETRY; + -+#endif ++ do { ++ pci_read_config_dword(osh->pdev, offset, &val); ++ if (val != 0xffffffff) ++ break; ++ } while (retry--); + -+#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ */ ++ return (val); ++} + -+#if defined(MACOSX) && defined(KERNEL) -+#include -+#endif ++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ ++ osl_pci_write_config((osh), (offset), (size), (val)) ++static inline void ++osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val) ++{ ++ uint retry = PCI_CFG_RETRY; + ++ do { ++ pci_write_config_dword(osh->pdev, offset, val); ++ if (offset != PCI_BAR0_WIN) ++ break; ++ if (osl_pci_read_config(osh, offset, size) == val) ++ break; ++ } while (retry--); ++} + -+/* use the default typedefs in the next section of this file */ -+#define USE_TYPEDEF_DEFAULTS + -+#endif /* SITE_TYPEDEFS */ ++/* return bus # for the pci device pointed by osh->pdev */ ++#define OSL_PCI_BUS(osh) osl_pci_bus(osh) ++static inline uint ++osl_pci_bus(osl_t *osh) ++{ ++ return ((struct pci_dev *)osh->pdev)->bus->number; ++} + ++/* return slot # for the pci device pointed by osh->pdev */ ++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) ++static inline uint ++osl_pci_slot(osl_t *osh) ++{ ++ return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn); ++} + -+/******************************************************************************* -+ * Default Typedefs -+ *******************************************************************************/ ++#endif +diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h +--- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,495 @@ ++/* ++ * pcicfg.h: PCI configuration constants and structures. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: pcicfg.h,v 1.1.1.11 2006/04/08 06:13:40 honor Exp $ ++ */ + -+#ifdef USE_TYPEDEF_DEFAULTS -+#undef USE_TYPEDEF_DEFAULTS ++#ifndef _h_pcicfg_ ++#define _h_pcicfg_ + -+#ifndef TYPEDEF_BOOL -+typedef /*@abstract@*/ unsigned char bool; ++/* The following inside ifndef's so we don't collide with NTDDK.H */ ++#ifndef PCI_MAX_BUS ++#define PCI_MAX_BUS 0x100 +#endif -+ -+/*----------------------- define uchar, ushort, uint, ulong ------------------*/ -+ -+#ifndef TYPEDEF_UCHAR -+typedef unsigned char uchar; ++#ifndef PCI_MAX_DEVICES ++#define PCI_MAX_DEVICES 0x20 +#endif -+ -+#ifndef TYPEDEF_USHORT -+typedef unsigned short ushort; ++#ifndef PCI_MAX_FUNCTION ++#define PCI_MAX_FUNCTION 0x8 +#endif + -+#ifndef TYPEDEF_UINT -+typedef unsigned int uint; ++#ifndef PCI_INVALID_VENDORID ++#define PCI_INVALID_VENDORID 0xffff +#endif -+ -+#ifndef TYPEDEF_ULONG -+typedef unsigned long ulong; ++#ifndef PCI_INVALID_DEVICEID ++#define PCI_INVALID_DEVICEID 0xffff +#endif + -+/*----------------------- define [u]int8/16/32/64, uintptr --------------------*/ + -+#ifndef TYPEDEF_UINT8 -+typedef unsigned char uint8; -+#endif -+ -+#ifndef TYPEDEF_UINT16 -+typedef unsigned short uint16; -+#endif ++/* Convert between bus-slot-function-register and config addresses */ + -+#ifndef TYPEDEF_UINT32 -+typedef unsigned int uint32; -+#endif ++#define PCICFG_BUS_SHIFT 16 /* Bus shift */ ++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ ++#define PCICFG_FUN_SHIFT 8 /* Function shift */ ++#define PCICFG_OFF_SHIFT 0 /* Register shift */ + -+#ifndef TYPEDEF_UINT64 -+typedef unsigned long long uint64; -+#endif ++#define PCICFG_BUS_MASK 0xff /* Bus mask */ ++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ ++#define PCICFG_FUN_MASK 7 /* Function mask */ ++#define PCICFG_OFF_MASK 0xff /* Bus mask */ + -+#ifndef TYPEDEF_UINTPTR -+typedef unsigned int uintptr; -+#endif ++#define PCI_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ ++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ ++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ ++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) + -+#ifndef TYPEDEF_INT8 -+typedef signed char int8; -+#endif ++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) ++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) ++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) ++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) + -+#ifndef TYPEDEF_INT16 -+typedef signed short int16; -+#endif ++/* PCIE Config space accessing MACROS */ + -+#ifndef TYPEDEF_INT32 -+typedef signed int int32; -+#endif ++#define PCIECFG_BUS_SHIFT 24 /* Bus shift */ ++#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define PCIECFG_FUN_SHIFT 16 /* Function shift */ ++#define PCIECFG_OFF_SHIFT 0 /* Register shift */ + -+#ifndef TYPEDEF_INT64 -+typedef signed long long int64; -+#endif ++#define PCIECFG_BUS_MASK 0xff /* Bus mask */ ++#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define PCIECFG_FUN_MASK 7 /* Function mask */ ++#define PCIECFG_OFF_MASK 0x3ff /* Register mask */ + -+/*----------------------- define float32/64, float_t -----------------------*/ ++#define PCIE_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \ ++ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \ ++ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \ ++ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT)) + -+#ifndef TYPEDEF_FLOAT32 -+typedef float float32; -+#endif ++#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK) ++#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK) ++#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK) ++#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK) + -+#ifndef TYPEDEF_FLOAT64 -+typedef double float64; -+#endif ++/* The actual config space */ + -+/* -+ * abstracted floating point type allows for compile time selection of -+ * single or double precision arithmetic. Compiling with -DFLOAT32 -+ * selects single precision; the default is double precision. -+ */ ++#define PCI_BAR_MAX 6 + -+#ifndef TYPEDEF_FLOAT_T ++#define PCI_ROM_BAR 8 + -+#if defined(FLOAT32) -+typedef float32 float_t; -+#else /* default to double precision floating point */ -+typedef float64 float_t; -+#endif ++#define PCR_RSVDA_MAX 2 + -+#endif /* TYPEDEF_FLOAT_T */ ++/* Bits in PCI bars' flags */ + -+/*----------------------- define macro values -----------------------------*/ ++#define PCIBAR_FLAGS 0xf ++#define PCIBAR_IO 0x1 ++#define PCIBAR_MEM1M 0x2 ++#define PCIBAR_MEM64 0x4 ++#define PCIBAR_PREFETCH 0x8 ++#define PCIBAR_MEM32_MASK 0xFFFFFF80 + -+#ifndef FALSE -+#define FALSE 0 -+#endif ++/* pci config status reg has a bit to indicate that capability ptr is present */ + -+#ifndef TRUE -+#define TRUE 1 -+#endif ++#define PCI_CAPPTR_PRESENT 0x0010 + -+#ifndef NULL -+#define NULL 0 -+#endif ++typedef struct _pci_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long base[PCI_BAR_MAX]; ++ unsigned long cardbus_cis; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long baserom; ++ unsigned long rsvd_a[PCR_RSVDA_MAX]; ++ unsigned char int_line; ++ unsigned char int_pin; ++ unsigned char min_gnt; ++ unsigned char max_lat; ++ unsigned char dev_dep[192]; ++} pci_config_regs; + -+#ifndef OFF -+#define OFF 0 -+#endif ++#define SZPCR (sizeof (pci_config_regs)) ++#define MINSZPCR 64 /* offsetof (dev_dep[0] */ + -+#ifndef ON -+#define ON 1 -+#endif ++/* A structure for the config registers is nice, but in most ++ * systems the config space is not memory mapped, so we need ++ * filed offsetts. :-( ++ */ ++#define PCI_CFG_VID 0 ++#define PCI_CFG_DID 2 ++#define PCI_CFG_CMD 4 ++#define PCI_CFG_STAT 6 ++#define PCI_CFG_REV 8 ++#define PCI_CFG_PROGIF 9 ++#define PCI_CFG_SUBCL 0xa ++#define PCI_CFG_BASECL 0xb ++#define PCI_CFG_CLSZ 0xc ++#define PCI_CFG_LATTIM 0xd ++#define PCI_CFG_HDR 0xe ++#define PCI_CFG_BIST 0xf ++#define PCI_CFG_BAR0 0x10 ++#define PCI_CFG_BAR1 0x14 ++#define PCI_CFG_BAR2 0x18 ++#define PCI_CFG_BAR3 0x1c ++#define PCI_CFG_BAR4 0x20 ++#define PCI_CFG_BAR5 0x24 ++#define PCI_CFG_CIS 0x28 ++#define PCI_CFG_SVID 0x2c ++#define PCI_CFG_SSID 0x2e ++#define PCI_CFG_ROMBAR 0x30 ++#define PCI_CFG_CAPPTR 0x34 ++#define PCI_CFG_INT 0x3c ++#define PCI_CFG_PIN 0x3d ++#define PCI_CFG_MINGNT 0x3e ++#define PCI_CFG_MAXLAT 0x3f + -+#define AUTO (-1) ++#ifdef __NetBSD__ ++#undef PCI_CLASS_DISPLAY ++#undef PCI_CLASS_MEMORY ++#undef PCI_CLASS_BRIDGE ++#undef PCI_CLASS_INPUT ++#undef PCI_CLASS_DOCK ++#endif /* __NetBSD__ */ + -+/* Reclaiming text and data : -+ The following macros specify special linker sections that can be reclaimed -+ after a system is considered 'up'. -+ */ -+#if defined(__GNUC__) && defined(BCMRECLAIM) -+extern bool bcmreclaimed; -+#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data##_ini -+#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn##_ini -+#define BCMINIT(_id) _id##_ini -+#else -+#define BCMINITDATA(_data) _data -+#define BCMINITFN(_fn) _fn -+#define BCMINIT(_id) _id -+#define bcmreclaimed 0 -+#endif ++/* Classes and subclasses */ + -+/*----------------------- define PTRSZ, INLINE ----------------------------*/ ++typedef enum { ++ PCI_CLASS_OLD = 0, ++ PCI_CLASS_DASDI, ++ PCI_CLASS_NET, ++ PCI_CLASS_DISPLAY, ++ PCI_CLASS_MMEDIA, ++ PCI_CLASS_MEMORY, ++ PCI_CLASS_BRIDGE, ++ PCI_CLASS_COMM, ++ PCI_CLASS_BASE, ++ PCI_CLASS_INPUT, ++ PCI_CLASS_DOCK, ++ PCI_CLASS_CPU, ++ PCI_CLASS_SERIAL, ++ PCI_CLASS_INTELLIGENT = 0xe, ++ PCI_CLASS_SATELLITE, ++ PCI_CLASS_CRYPT, ++ PCI_CLASS_DSP, ++ PCI_CLASS_XOR = 0xfe ++} pci_classes; + -+#ifndef PTRSZ -+#define PTRSZ sizeof (char*) -+#endif ++typedef enum { ++ PCI_DASDI_SCSI, ++ PCI_DASDI_IDE, ++ PCI_DASDI_FLOPPY, ++ PCI_DASDI_IPI, ++ PCI_DASDI_RAID, ++ PCI_DASDI_OTHER = 0x80 ++} pci_dasdi_subclasses; + -+#ifndef INLINE ++typedef enum { ++ PCI_NET_ETHER, ++ PCI_NET_TOKEN, ++ PCI_NET_FDDI, ++ PCI_NET_ATM, ++ PCI_NET_OTHER = 0x80 ++} pci_net_subclasses; + -+#ifdef _MSC_VER ++typedef enum { ++ PCI_DISPLAY_VGA, ++ PCI_DISPLAY_XGA, ++ PCI_DISPLAY_3D, ++ PCI_DISPLAY_OTHER = 0x80 ++} pci_display_subclasses; + -+#define INLINE __inline ++typedef enum { ++ PCI_MMEDIA_VIDEO, ++ PCI_MMEDIA_AUDIO, ++ PCI_MMEDIA_PHONE, ++ PCI_MEDIA_OTHER = 0x80 ++} pci_mmedia_subclasses; + -+#elif __GNUC__ ++typedef enum { ++ PCI_MEMORY_RAM, ++ PCI_MEMORY_FLASH, ++ PCI_MEMORY_OTHER = 0x80 ++} pci_memory_subclasses; + -+#define INLINE __inline__ ++typedef enum { ++ PCI_BRIDGE_HOST, ++ PCI_BRIDGE_ISA, ++ PCI_BRIDGE_EISA, ++ PCI_BRIDGE_MC, ++ PCI_BRIDGE_PCI, ++ PCI_BRIDGE_PCMCIA, ++ PCI_BRIDGE_NUBUS, ++ PCI_BRIDGE_CARDBUS, ++ PCI_BRIDGE_RACEWAY, ++ PCI_BRIDGE_OTHER = 0x80 ++} pci_bridge_subclasses; + -+#else ++typedef enum { ++ PCI_COMM_UART, ++ PCI_COMM_PARALLEL, ++ PCI_COMM_MULTIUART, ++ PCI_COMM_MODEM, ++ PCI_COMM_OTHER = 0x80 ++} pci_comm_subclasses; + -+#define INLINE ++typedef enum { ++ PCI_BASE_PIC, ++ PCI_BASE_DMA, ++ PCI_BASE_TIMER, ++ PCI_BASE_RTC, ++ PCI_BASE_PCI_HOTPLUG, ++ PCI_BASE_OTHER = 0x80 ++} pci_base_subclasses; + -+#endif /* _MSC_VER */ ++typedef enum { ++ PCI_INPUT_KBD, ++ PCI_INPUT_PEN, ++ PCI_INPUT_MOUSE, ++ PCI_INPUT_SCANNER, ++ PCI_INPUT_GAMEPORT, ++ PCI_INPUT_OTHER = 0x80 ++} pci_input_subclasses; + -+#endif /* INLINE */ ++typedef enum { ++ PCI_DOCK_GENERIC, ++ PCI_DOCK_OTHER = 0x80 ++} pci_dock_subclasses; + -+#undef TYPEDEF_BOOL -+#undef TYPEDEF_UCHAR -+#undef TYPEDEF_USHORT -+#undef TYPEDEF_UINT -+#undef TYPEDEF_ULONG -+#undef TYPEDEF_UINT8 -+#undef TYPEDEF_UINT16 -+#undef TYPEDEF_UINT32 -+#undef TYPEDEF_UINT64 -+#undef TYPEDEF_UINTPTR -+#undef TYPEDEF_INT8 -+#undef TYPEDEF_INT16 -+#undef TYPEDEF_INT32 -+#undef TYPEDEF_INT64 -+#undef TYPEDEF_FLOAT32 -+#undef TYPEDEF_FLOAT64 -+#undef TYPEDEF_FLOAT_T ++typedef enum { ++ PCI_CPU_386, ++ PCI_CPU_486, ++ PCI_CPU_PENTIUM, ++ PCI_CPU_ALPHA = 0x10, ++ PCI_CPU_POWERPC = 0x20, ++ PCI_CPU_MIPS = 0x30, ++ PCI_CPU_COPROC = 0x40, ++ PCI_CPU_OTHER = 0x80 ++} pci_cpu_subclasses; + -+#endif /* USE_TYPEDEF_DEFAULTS */ ++typedef enum { ++ PCI_SERIAL_IEEE1394, ++ PCI_SERIAL_ACCESS, ++ PCI_SERIAL_SSA, ++ PCI_SERIAL_USB, ++ PCI_SERIAL_FIBER, ++ PCI_SERIAL_SMBUS, ++ PCI_SERIAL_OTHER = 0x80 ++} pci_serial_subclasses; + -+#endif /* _TYPEDEFS_H_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/Makefile linux-2.4.32-brcm/arch/mips/bcm947xx/Makefile ---- linux-2.4.32/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/Makefile 2005-12-19 01:56:51.733868750 +0100 -@@ -0,0 +1,15 @@ -+# -+# Makefile for the BCM947xx specific kernel interface routines -+# under Linux. -+# ++typedef enum { ++ PCI_INTELLIGENT_I2O ++} pci_intelligent_subclasses; + -+EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER ++typedef enum { ++ PCI_SATELLITE_TV, ++ PCI_SATELLITE_AUDIO, ++ PCI_SATELLITE_VOICE, ++ PCI_SATELLITE_DATA, ++ PCI_SATELLITE_OTHER = 0x80 ++} pci_satellite_subclasses; + -+O_TARGET := bcm947xx.o ++typedef enum { ++ PCI_CRYPT_NETWORK, ++ PCI_CRYPT_ENTERTAINMENT, ++ PCI_CRYPT_OTHER = 0x80 ++} pci_crypt_subclasses; + -+export-objs := nvram_linux.o setup.o -+obj-y := prom.o setup.o time.o sbmips.o gpio.o -+obj-y += nvram.o nvram_linux.o sflash.o cfe_env.o -+obj-$(CONFIG_PCI) += sbpci.o pcibios.o ++typedef enum { ++ PCI_DSP_DPIO, ++ PCI_DSP_OTHER = 0x80 ++} pci_dsp_subclasses; + -+include $(TOPDIR)/Rules.make -diff -Nur linux-2.4.32/arch/mips/bcm947xx/nvram.c linux-2.4.32-brcm/arch/mips/bcm947xx/nvram.c ---- linux-2.4.32/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/nvram.c 2005-12-19 01:05:00.079582750 +0100 -@@ -0,0 +1,320 @@ -+/* -+ * NVRAM variable manipulation (common) -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ ++typedef enum { ++ PCI_XOR_QDMA, ++ PCI_XOR_OTHER = 0x80 ++} pci_xor_subclasses; + -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern struct nvram_tuple * BCMINIT(_nvram_realloc)(struct nvram_tuple *t, const char *name, const char *value); -+extern void BCMINIT(_nvram_free)(struct nvram_tuple *t); -+extern int BCMINIT(_nvram_read)(void *buf); ++/* Header types */ ++typedef enum { ++ PCI_HEADER_NORMAL, ++ PCI_HEADER_BRIDGE, ++ PCI_HEADER_CARDBUS ++} pci_header_types; + -+char * BCMINIT(_nvram_get)(const char *name); -+int BCMINIT(_nvram_set)(const char *name, const char *value); -+int BCMINIT(_nvram_unset)(const char *name); -+int BCMINIT(_nvram_getall)(char *buf, int count); -+int BCMINIT(_nvram_commit)(struct nvram_header *header); -+int BCMINIT(_nvram_init)(void); -+void BCMINIT(_nvram_exit)(void); + -+static struct nvram_tuple * BCMINITDATA(nvram_hash)[257]; -+static struct nvram_tuple * nvram_dead; ++/* Overlay for a PCI-to-PCI bridge */ + -+/* Free all tuples. Should be locked. */ -+static void -+BCMINITFN(nvram_free)(void) -+{ -+ uint i; -+ struct nvram_tuple *t, *next; ++#define PPB_RSVDA_MAX 2 ++#define PPB_RSVDD_MAX 8 + -+ /* Free hash table */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { -+ for (t = BCMINIT(nvram_hash)[i]; t; t = next) { -+ next = t->next; -+ BCMINIT(_nvram_free)(t); -+ } -+ BCMINIT(nvram_hash)[i] = NULL; -+ } ++typedef struct _ppb_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long rsvd_a[PPB_RSVDA_MAX]; ++ unsigned char prim_bus; ++ unsigned char sec_bus; ++ unsigned char sub_bus; ++ unsigned char sec_lat; ++ unsigned char io_base; ++ unsigned char io_lim; ++ unsigned short sec_status; ++ unsigned short mem_base; ++ unsigned short mem_lim; ++ unsigned short pf_mem_base; ++ unsigned short pf_mem_lim; ++ unsigned long pf_mem_base_hi; ++ unsigned long pf_mem_lim_hi; ++ unsigned short io_base_hi; ++ unsigned short io_lim_hi; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long rsvd_b; ++ unsigned char rsvd_c; ++ unsigned char int_pin; ++ unsigned short bridge_ctrl; ++ unsigned char chip_ctrl; ++ unsigned char diag_ctrl; ++ unsigned short arb_ctrl; ++ unsigned long rsvd_d[PPB_RSVDD_MAX]; ++ unsigned char dev_dep[192]; ++} ppb_config_regs; + -+ /* Free dead table */ -+ for (t = nvram_dead; t; t = next) { -+ next = t->next; -+ BCMINIT(_nvram_free)(t); -+ } -+ nvram_dead = NULL; + -+ /* Indicate to per-port code that all tuples have been freed */ -+ BCMINIT(_nvram_free)(NULL); -+} ++/* PCI CAPABILITY DEFINES */ ++#define PCI_CAP_POWERMGMTCAP_ID 0x01 ++#define PCI_CAP_MSICAP_ID 0x05 ++#define PCI_CAP_PCIECAP_ID 0x10 + -+/* String hash */ -+static INLINE uint -+hash(const char *s) -+{ -+ uint hash = 0; ++/* Data structure to define the Message Signalled Interrupt facility ++ * Valid for PCI and PCIE configurations ++ */ ++typedef struct _pciconfig_cap_msi { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short msgctrl; ++ unsigned int msgaddr; ++} pciconfig_cap_msi; + -+ while (*s) -+ hash = 31 * hash + *s++; ++/* Data structure to define the Power managment facility ++ * Valid for PCI and PCIE configurations ++ */ ++typedef struct _pciconfig_cap_pwrmgmt { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pme_cap; ++ unsigned short pme_sts_ctrl; ++ unsigned char pme_bridge_ext; ++ unsigned char data; ++} pciconfig_cap_pwrmgmt; + -+ return hash; -+} ++/* Data structure to define the PCIE capability */ ++typedef struct _pciconfig_cap_pcie { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pcie_cap; ++ unsigned int dev_cap; ++ unsigned short dev_ctrl; ++ unsigned short dev_status; ++ unsigned int link_cap; ++ unsigned short link_ctrl; ++ unsigned short link_status; ++} pciconfig_cap_pcie; + -+/* (Re)initialize the hash table. Should be locked. */ -+static int -+BCMINITFN(nvram_rehash)(struct nvram_header *header) -+{ -+ char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq; ++/* PCIE Enhanced CAPABILITY DEFINES */ ++#define PCIE_EXTCFG_OFFSET 0x100 ++#define PCIE_ADVERRREP_CAPID 0x0001 ++#define PCIE_VC_CAPID 0x0002 ++#define PCIE_DEVSNUM_CAPID 0x0003 ++#define PCIE_PWRBUDGET_CAPID 0x0004 + -+ /* (Re)initialize hash table */ -+ BCMINIT(nvram_free)(); ++/* Header to define the PCIE specific capabilities in the extended config space */ ++typedef struct _pcie_enhanced_caphdr { ++ unsigned short capID; ++ unsigned short cap_ver : 4; ++ unsigned short next_ptr : 12; ++} pcie_enhanced_caphdr; + -+ /* Parse and set "name=value\0 ... \0\0" */ -+ name = (char *) &header[1]; -+ end = (char *) header + NVRAM_SPACE - 2; -+ end[0] = end[1] = '\0'; -+ for (; *name; name = value + strlen(value) + 1) { -+ if (!(eq = strchr(name, '='))) -+ break; -+ *eq = '\0'; -+ value = eq + 1; -+ BCMINIT(_nvram_set)(name, value); -+ *eq = '='; -+ } + -+ /* Set special SDRAM parameters */ -+ if (!BCMINIT(_nvram_get)("sdram_init")) { -+ sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16)); -+ BCMINIT(_nvram_set)("sdram_init", buf); -+ } -+ if (!BCMINIT(_nvram_get)("sdram_config")) { -+ sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff)); -+ BCMINIT(_nvram_set)("sdram_config", buf); -+ } -+ if (!BCMINIT(_nvram_get)("sdram_refresh")) { -+ sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff)); -+ BCMINIT(_nvram_set)("sdram_refresh", buf); -+ } -+ if (!BCMINIT(_nvram_get)("sdram_ncdl")) { -+ sprintf(buf, "0x%08X", header->config_ncdl); -+ BCMINIT(_nvram_set)("sdram_ncdl", buf); -+ } ++/* Everything below is BRCM HND proprietary */ + -+ return 0; -+} + -+/* Get the value of an NVRAM variable. Should be locked. */ -+char * -+BCMINITFN(_nvram_get)(const char *name) -+{ -+ uint i; -+ struct nvram_tuple *t; -+ char *value; ++/* Brcm PCI configuration registers */ ++#define cap_list rsvd_a[0] ++#define bar0_window dev_dep[0x80 - 0x40] ++#define bar1_window dev_dep[0x84 - 0x40] ++#define sprom_control dev_dep[0x88 - 0x40] + -+ if (!name) -+ return NULL; ++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ ++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ ++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ ++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ ++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ ++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ ++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ ++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ ++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address */ ++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ ++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ ++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ + -+ /* Hash the name */ -+ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); ++#define PCI_BAR0_SHADOW_OFFSET (2 * 1024) /* bar0 + 2K accesses sprom shadow (in pci core) */ ++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ ++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ ++#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) /* pci core SB registers are at the end of the ++ * 8KB window, so their address is the "regular" ++ * address plus 4K ++ */ ++#define PCI_BAR0_WINSZ 8192 /* bar0 window size */ + -+ /* Find the associated tuple in the hash table */ -+ for (t = BCMINIT(nvram_hash)[i]; t && strcmp(t->name, name); t = t->next); ++/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */ ++#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) /* bar0 + 8K accesses pci/pcie core registers */ ++#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) /* bar0 + 12K accesses chipc core registers */ ++#define PCI_16KBB0_WINSZ (16 * 1024) /* bar0 window size */ + -+ value = t ? t->value : NULL; ++/* PCI_INT_STATUS */ ++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ + -+ return value; -+} ++/* PCI_INT_MASK */ ++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ ++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ ++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ + -+/* Get the value of an NVRAM variable. Should be locked. */ -+int -+BCMINITFN(_nvram_set)(const char *name, const char *value) -+{ -+ uint i; -+ struct nvram_tuple *t, *u, **prev; ++/* PCI_SPROM_CONTROL */ ++#define SPROM_SZ_MSK 0x02 /* SPROM Size Mask */ ++#define SPROM_LOCKED 0x08 /* SPROM Locked */ ++#define SPROM_BLANK 0x04 /* indicating a blank SPROM */ ++#define SPROM_WRITEEN 0x10 /* SPROM write enable */ ++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ ++#define SPROM_OTPIN_USE 0x80 /* device OTP In use */ + -+ /* Hash the name */ -+ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); ++#define SPROM_SIZE 256 /* sprom size in 16-bit */ ++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ + -+ /* Find the associated tuple in the hash table */ -+ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); ++/* PCI_CFG_CMD_STAT */ ++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ + -+ /* (Re)allocate tuple */ -+ if (!(u = BCMINIT(_nvram_realloc)(t, name, value))) -+ return -12; /* -ENOMEM */ ++#endif /* _h_pcicfg_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h +--- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,516 @@ ++/* ++ * SiliconBackplane Chipcommon core hardware definitions. ++ * ++ * The chipcommon core provides chip identification, SB control, ++ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, ++ * gpio interface, extbus, and support for serial and parallel flashes. ++ * ++ * $Id: sbchipc.h,v 1.1.1.14 2006/04/15 01:29:08 michael Exp $ ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ */ + -+ /* Value reallocated */ -+ if (t && t == u) -+ return 0; ++#ifndef _SBCHIPC_H ++#define _SBCHIPC_H + -+ /* Move old tuple to the dead table */ -+ if (t) { -+ *prev = t->next; -+ t->next = nvram_dead; -+ nvram_dead = t; -+ } + -+ /* Add new tuple to the hash table */ -+ u->next = BCMINIT(nvram_hash)[i]; -+ BCMINIT(nvram_hash)[i] = u; ++#ifndef _LANGUAGE_ASSEMBLY + -+ return 0; -+} ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ + -+/* Unset the value of an NVRAM variable. Should be locked. */ -+int -+BCMINITFN(_nvram_unset)(const char *name) -+{ -+ uint i; -+ struct nvram_tuple *t, **prev; ++typedef volatile struct { ++ uint32 chipid; /* 0x0 */ ++ uint32 capabilities; ++ uint32 corecontrol; /* corerev >= 1 */ ++ uint32 bist; + -+ if (!name) -+ return 0; ++ /* OTP */ ++ uint32 otpstatus; /* 0x10, corerev >= 10 */ ++ uint32 otpcontrol; ++ uint32 otpprog; ++ uint32 PAD; + -+ /* Hash the name */ -+ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); -+ -+ /* Find the associated tuple in the hash table */ -+ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); ++ /* Interrupt control */ ++ uint32 intstatus; /* 0x20 */ ++ uint32 intmask; ++ uint32 chipcontrol; /* 0x28, rev >= 11 */ ++ uint32 chipstatus; /* 0x2c, rev >= 11 */ + -+ /* Move it to the dead table */ -+ if (t) { -+ *prev = t->next; -+ t->next = nvram_dead; -+ nvram_dead = t; -+ } ++ /* Jtag Master */ ++ uint32 jtagcmd; /* 0x30, rev >= 10 */ ++ uint32 jtagir; ++ uint32 jtagdr; ++ uint32 jtagctrl; + -+ return 0; -+} ++ /* serial flash interface registers */ ++ uint32 flashcontrol; /* 0x40 */ ++ uint32 flashaddress; ++ uint32 flashdata; ++ uint32 PAD[1]; + -+/* Get all NVRAM variables. Should be locked. */ -+int -+BCMINITFN(_nvram_getall)(char *buf, int count) -+{ -+ uint i; -+ struct nvram_tuple *t; -+ int len = 0; ++ /* Silicon backplane configuration broadcast control */ ++ uint32 broadcastaddress; /* 0x50 */ ++ uint32 broadcastdata; ++ uint32 PAD[2]; + -+ bzero(buf, count); ++ /* gpio - cleared only by power-on-reset */ ++ uint32 gpioin; /* 0x60 */ ++ uint32 gpioout; ++ uint32 gpioouten; ++ uint32 gpiocontrol; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[2]; + -+ /* Write name=value\0 ... \0\0 */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { -+ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) { -+ if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1)) -+ len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1; -+ else -+ break; -+ } -+ } ++ /* Watchdog timer */ ++ uint32 watchdog; /* 0x80 */ ++ uint32 PAD[1]; + -+ return 0; -+} ++ /* GPIO based LED powersave registers corerev >= 16 */ ++ uint32 gpiotimerval; /* 0x88 */ ++ uint32 gpiotimeroutmask; + -+/* Regenerate NVRAM. Should be locked. */ -+int -+BCMINITFN(_nvram_commit)(struct nvram_header *header) -+{ -+ char *init, *config, *refresh, *ncdl; -+ char *ptr, *end; -+ int i; -+ struct nvram_tuple *t; -+ struct nvram_header tmp; -+ uint8 crc; ++ /* clock control */ ++ uint32 clockcontrol_n; /* 0x90 */ ++ uint32 clockcontrol_sb; /* aka m0 */ ++ uint32 clockcontrol_pci; /* aka m1 */ ++ uint32 clockcontrol_m2; /* mii/uart/mipsref */ ++ uint32 clockcontrol_m3; /* cpu */ ++ uint32 clkdiv; /* corerev >= 3 */ ++ uint32 PAD[2]; + -+ /* Regenerate header */ -+ header->magic = NVRAM_MAGIC; -+ header->crc_ver_init = (NVRAM_VERSION << 8); -+ if (!(init = BCMINIT(_nvram_get)("sdram_init")) || -+ !(config = BCMINIT(_nvram_get)("sdram_config")) || -+ !(refresh = BCMINIT(_nvram_get)("sdram_refresh")) || -+ !(ncdl = BCMINIT(_nvram_get)("sdram_ncdl"))) { -+ header->crc_ver_init |= SDRAM_INIT << 16; -+ header->config_refresh = SDRAM_CONFIG; -+ header->config_refresh |= SDRAM_REFRESH << 16; -+ header->config_ncdl = 0; -+ } else { -+ header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16; -+ header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff; -+ header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16; -+ header->config_ncdl = bcm_strtoul(ncdl, NULL, 0); -+ } ++ /* pll delay registers (corerev >= 4) */ ++ uint32 pll_on_delay; /* 0xb0 */ ++ uint32 fref_sel_delay; ++ uint32 slow_clk_ctl; /* 5 < corerev < 10 */ ++ uint32 PAD[1]; + -+ /* Clear data area */ -+ ptr = (char *) header + sizeof(struct nvram_header); -+ bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header)); ++ /* Instaclock registers (corerev >= 10) */ ++ uint32 system_clk_ctl; /* 0xc0 */ ++ uint32 clkstatestretch; ++ uint32 PAD[14]; + -+ /* Leave space for a double NUL at the end */ -+ end = (char *) header + NVRAM_SPACE - 2; ++ /* ExtBus control registers (corerev >= 3) */ ++ uint32 pcmcia_config; /* 0x100 */ ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; ++ uint32 ide_config; ++ uint32 ide_memwait; ++ uint32 ide_attrwait; ++ uint32 ide_iowait; ++ uint32 prog_config; ++ uint32 prog_waitcount; ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[44]; + -+ /* Write out all tuples */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { -+ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) { -+ if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end) -+ break; -+ ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1; -+ } -+ } ++ /* Clock control and hardware workarounds */ ++ uint32 clk_ctl_st; ++ uint32 hw_war; ++ uint32 PAD[70]; + -+ /* End with a double NUL */ -+ ptr += 2; ++ /* uarts */ ++ uint8 uart0data; /* 0x300 */ ++ uint8 uart0imr; ++ uint8 uart0fcr; ++ uint8 uart0lcr; ++ uint8 uart0mcr; ++ uint8 uart0lsr; ++ uint8 uart0msr; ++ uint8 uart0scratch; ++ uint8 PAD[248]; /* corerev >= 1 */ + -+ /* Set new length */ -+ header->len = ROUNDUP(ptr - (char *) header, 4); ++ uint8 uart1data; /* 0x400 */ ++ uint8 uart1imr; ++ uint8 uart1fcr; ++ uint8 uart1lcr; ++ uint8 uart1mcr; ++ uint8 uart1lsr; ++ uint8 uart1msr; ++ uint8 uart1scratch; ++} chipcregs_t; + -+ /* Little-endian CRC8 over the last 11 bytes of the header */ -+ tmp.crc_ver_init = htol32(header->crc_ver_init); -+ tmp.config_refresh = htol32(header->config_refresh); -+ tmp.config_ncdl = htol32(header->config_ncdl); -+ crc = hndcrc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE); ++#endif /* _LANGUAGE_ASSEMBLY */ + -+ /* Continue CRC8 over data bytes */ -+ crc = hndcrc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc); ++#define CC_CHIPID 0 ++#define CC_CAPABILITIES 4 ++#define CC_JTAGCMD 0x30 ++#define CC_JTAGIR 0x34 ++#define CC_JTAGDR 0x38 ++#define CC_JTAGCTRL 0x3c ++#define CC_WATCHDOG 0x80 ++#define CC_CLKC_N 0x90 ++#define CC_CLKC_M0 0x94 ++#define CC_CLKC_M1 0x98 ++#define CC_CLKC_M2 0x9c ++#define CC_CLKC_M3 0xa0 ++#define CC_CLKDIV 0xa4 ++#define CC_SYS_CLK_CTL 0xc0 ++#define CC_OTP 0x800 + -+ /* Set new CRC8 */ -+ header->crc_ver_init |= crc; ++/* chipid */ ++#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ ++#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ ++#define CID_REV_SHIFT 16 /* Chip Revision shift */ ++#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ ++#define CID_PKG_SHIFT 20 /* Package Option shift */ ++#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ ++#define CID_CC_SHIFT 24 + -+ /* Reinitialize hash table */ -+ return BCMINIT(nvram_rehash)(header); -+} ++/* capabilities */ ++#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ ++#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ ++#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ ++#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ ++#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ ++#define CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */ ++#define CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */ ++#define CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */ ++#define CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */ ++#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ ++#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ ++#define CAP_PWR_CTL 0x00040000 /* Power control */ ++#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ ++#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ ++#define CAP_OTPSIZE_BASE 5 /* OTP Size base */ ++#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ ++#define CAP_ROM 0x00800000 /* Internal boot rom active */ ++#define CAP_BKPLN64 0x08000000 /* 64-bit backplane */ + -+/* Initialize hash table. Should be locked. */ -+int -+BCMINITFN(_nvram_init)(void) -+{ -+ struct nvram_header *header; -+ int ret; -+ void *osh; ++/* PLL type */ ++#define PLL_NONE 0x00000000 ++#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ ++#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ ++#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */ ++#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ ++#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */ + -+ /* get kernel osl handler */ -+ osh = osl_attach(NULL); ++/* corecontrol */ ++#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ ++#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ + -+ if (!(header = (struct nvram_header *) MALLOC(osh, NVRAM_SPACE))) { -+ printf("nvram_init: out of memory, malloced %d bytes\n", MALLOCED(osh)); -+ return -12; /* -ENOMEM */ -+ } ++/* chipcontrol */ ++#define CHIPCTRL_4321A0_DEFAULT 0x3a4 ++#define CHIPCTRL_4321A1_DEFAULT 0x0a4 + -+ if ((ret = BCMINIT(_nvram_read)(header)) == 0 && -+ header->magic == NVRAM_MAGIC) -+ BCMINIT(nvram_rehash)(header); ++/* Fields in the otpstatus register */ ++#define OTPS_PROGFAIL 0x80000000 ++#define OTPS_PROTECT 0x00000007 ++#define OTPS_HW_PROTECT 0x00000001 ++#define OTPS_SW_PROTECT 0x00000002 ++#define OTPS_CID_PROTECT 0x00000004 + -+ MFREE(osh, header, NVRAM_SPACE); -+ return ret; -+} ++/* Fields in the otpcontrol register */ ++#define OTPC_RECWAIT 0xff000000 ++#define OTPC_PROGWAIT 0x00ffff00 ++#define OTPC_PRW_SHIFT 8 ++#define OTPC_MAXFAIL 0x00000038 ++#define OTPC_VSEL 0x00000006 ++#define OTPC_SELVL 0x00000001 + -+/* Free hash table. Should be locked. */ -+void -+BCMINITFN(_nvram_exit)(void) -+{ -+ BCMINIT(nvram_free)(); -+} -diff -Nur linux-2.4.32/arch/mips/bcm947xx/nvram_linux.c linux-2.4.32-brcm/arch/mips/bcm947xx/nvram_linux.c ---- linux-2.4.32/arch/mips/bcm947xx/nvram_linux.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/nvram_linux.c 2005-12-19 01:09:59.782313000 +0100 -@@ -0,0 +1,653 @@ -+/* -+ * NVRAM variable manipulation (Linux kernel half) -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ ++/* Fields in otpprog */ ++#define OTPP_COL_MASK 0x000000ff ++#define OTPP_ROW_MASK 0x0000ff00 ++#define OTPP_ROW_SHIFT 8 ++#define OTPP_READERR 0x10000000 ++#define OTPP_VALUE 0x20000000 ++#define OTPP_VALUE_SHIFT 29 ++#define OTPP_READ 0x40000000 ++#define OTPP_START 0x80000000 ++#define OTPP_BUSY 0x80000000 + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/* jtagcmd */ ++#define JCMD_START 0x80000000 ++#define JCMD_BUSY 0x80000000 ++#define JCMD_PAUSE 0x40000000 ++#define JCMD0_ACC_MASK 0x0000f000 ++#define JCMD0_ACC_IRDR 0x00000000 ++#define JCMD0_ACC_DR 0x00001000 ++#define JCMD0_ACC_IR 0x00002000 ++#define JCMD0_ACC_RESET 0x00003000 ++#define JCMD0_ACC_IRPDR 0x00004000 ++#define JCMD0_ACC_PDR 0x00005000 ++#define JCMD0_IRW_MASK 0x00000f00 ++#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ ++#define JCMD_ACC_IRDR 0x00000000 ++#define JCMD_ACC_DR 0x00010000 ++#define JCMD_ACC_IR 0x00020000 ++#define JCMD_ACC_RESET 0x00030000 ++#define JCMD_ACC_IRPDR 0x00040000 ++#define JCMD_ACC_PDR 0x00050000 ++#define JCMD_IRW_MASK 0x00001f00 ++#define JCMD_IRW_SHIFT 8 ++#define JCMD_DRW_MASK 0x0000003f + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/* jtagctrl */ ++#define JCTRL_FORCE_CLK 4 /* Force clock */ ++#define JCTRL_EXT_EN 2 /* Enable external targets */ ++#define JCTRL_EN 1 /* Enable Jtag master */ + -+/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ -+static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); ++/* Fields in clkdiv */ ++#define CLKD_SFLASH 0x0f000000 ++#define CLKD_SFLASH_SHIFT 24 ++#define CLKD_OTP 0x000f0000 ++#define CLKD_OTP_SHIFT 16 ++#define CLKD_JTAG 0x00000f00 ++#define CLKD_JTAG_SHIFT 8 ++#define CLKD_UART 0x000000ff + -+#ifdef MODULE ++/* intstatus/intmask */ ++#define CI_GPIO 0x00000001 /* gpio intr */ ++#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ ++#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ + -+#define early_nvram_get(name) nvram_get(name) ++/* slow_clk_ctl */ ++#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ ++#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ ++#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ ++#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ ++#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ ++#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, ++ * 0: LPO is enabled ++ */ ++#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, ++ * 0: power logic control ++ */ ++#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors ++ * PLL clock disable requests from core ++ */ ++#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't ++ * disable crystal when appropriate ++ */ ++#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ ++#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ ++#define SCC_CD_SHIFT 16 + -+#else /* !MODULE */ ++/* system_clk_ctl */ ++#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ ++#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ ++#define SYCC_FP 0x00000004 /* ForcePLLOn */ ++#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ ++#define SYCC_HR 0x00000010 /* Force HT */ ++#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ ++#define SYCC_CD_SHIFT 16 + -+/* Global SB handle */ -+extern void *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; ++/* gpiotimerval */ ++#define GPIO_ONTIME_SHIFT 16 + -+static int cfe_env; -+extern char *cfe_env_get(char *nv_buf, const char *name); ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 ++#define CN_PLLC_MASK 0xf0000 /* pll control */ ++#define CN_PLLC_SHIFT 16 + -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock -+#define KB * 1024 -+#define MB * 1024 * 1024 ++/* clockcontrol_sb/pci/uart */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 + -+/* Probe for NVRAM header */ -+static void __init -+early_nvram_init(void) -+{ -+ struct nvram_header *header; -+ chipcregs_t *cc; -+ struct sflash *info = NULL; -+ int i; -+ uint32 base, off, lim; -+ u32 *src, *dst; ++/* N3M Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 + -+ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { -+ base = KSEG1ADDR(SB_FLASH2); -+ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { -+ case PFLASH: -+ lim = SB_FLASH2_SZ; -+ break; ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ + -+ case SFLASH_ST: -+ case SFLASH_AT: -+ if ((info = sflash_init(cc)) == NULL) -+ return; -+ lim = info->size; -+ break; ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 + -+ case FLASH_NONE: -+ default: -+ return; -+ } -+ } else { -+ /* extif assumed, Stop at 4 MB */ -+ base = KSEG1ADDR(SB_FLASH1); -+ lim = SB_FLASH1_SZ; -+ } ++/* Type 2 Clock control magic field values */ ++#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ ++#define CC_T2M2_BIAS 3 /* m2 bias */ + -+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ -+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); -+ dst = (u32 *) nvram_buf; -+ if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) { -+ printk("early_nvram_init: WGT634U NVRAM found.\n"); ++#define CC_T2MC_M1BYP 1 ++#define CC_T2MC_M2BYP 2 ++#define CC_T2MC_M3BYP 4 + -+ for (i = 0; i < 0x1ff0; i++) { -+ if (*src == 0xFFFFFFFF) -+ break; -+ *dst++ = *src++; -+ } -+ cfe_env = 1; -+ return; -+ } ++/* Type 6 Clock control magic field values */ ++#define CC_T6_MMASK 1 /* bits of interest in m */ ++#define CC_T6_M0 120000000 /* sb clock for m = 0 */ ++#define CC_T6_M1 100000000 /* sb clock for m = 1 */ ++#define SB2MIPS_T6(sb) (2 * (sb)) + -+ off = FLASH_MIN; -+ while (off <= lim) { -+ /* Windowed flash access */ -+ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); -+ if (header->magic == NVRAM_MAGIC) -+ goto found; -+ off <<= 1; -+ } ++/* Common clock base */ ++#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ ++#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */ + -+ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ -+ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB); -+ if (header->magic == NVRAM_MAGIC) -+ goto found; -+ -+ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB); -+ if (header->magic == NVRAM_MAGIC) -+ goto found; -+ -+ printk("early_nvram_init: NVRAM not found\n"); -+ return; ++/* Clock control values for 200Mhz in 5350 */ ++#define CLKC_5350_N 0x0311 ++#define CLKC_5350_M 0x04020009 + -+found: -+ src = (u32 *) header; -+ dst = (u32 *) nvram_buf; -+ for (i = 0; i < sizeof(struct nvram_header); i += 4) -+ *dst++ = *src++; -+ for (; i < header->len && i < NVRAM_SPACE; i += 4) -+ *dst++ = ltoh32(*src++); -+} ++/* Flash types in the chipcommon capabilities register */ ++#define FLASH_NONE 0x000 /* No flash */ ++#define SFLASH_ST 0x100 /* ST serial flash */ ++#define SFLASH_AT 0x200 /* Atmel serial flash */ ++#define PFLASH 0x700 /* Parallel flash */ + -+/* Early (before mm or mtd) read-only access to NVRAM */ -+static char * __init -+early_nvram_get(const char *name) -+{ -+ char *var, *value, *end, *eq; ++/* Bits in the ExtBus config registers */ ++#define CC_CFG_EN 0x0001 /* Enable */ ++#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ ++#define CC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */ ++#define CC_CFG_EM_SYNC 0x0002 /* Synchronous */ ++#define CC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */ ++#define CC_CFG_EM_IDE 0x0006 /* IDE */ ++#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ ++#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ ++#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ ++#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ + -+ if (!name) -+ return NULL; ++/* ExtBus address space */ ++#define CC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */ ++#define CC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */ ++#define CC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */ ++#define CC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */ ++#define CC_EB_IDE 0x1a800000 /* IDE memory base */ ++#define CC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */ ++#define CC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */ ++#define CC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */ ++#define CC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */ + -+ /* Too early? */ -+ if (sbh == NULL) -+ return NULL; + -+ if (!nvram_buf[0]) -+ early_nvram_init(); ++/* Start/busy bit in flashcontrol */ ++#define SFLASH_OPCODE 0x000000ff ++#define SFLASH_ACTION 0x00000700 ++#define SFLASH_START 0x80000000 ++#define SFLASH_BUSY SFLASH_START + -+ if (cfe_env) -+ return cfe_env_get(nvram_buf, name); ++/* flashcontrol action codes */ ++#define SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */ ++#define SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */ ++#define SFLASH_ACT_OP3A 0x0200 /* opcode + 3 address bytes */ ++#define SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addres & 1 data bytes */ ++#define SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addres & 4 data bytes */ ++#define SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addres, 4 don't care & 4 data bytes */ ++#define SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addres, 1 don't care & 4 data bytes */ + -+ /* Look for name=value and return value */ -+ var = &nvram_buf[sizeof(struct nvram_header)]; -+ end = nvram_buf + sizeof(nvram_buf) - 2; -+ end[0] = end[1] = '\0'; -+ for (; *var; var = value + strlen(value) + 1) { -+ if (!(eq = strchr(var, '='))) -+ break; -+ value = eq + 1; -+ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) -+ return value; -+ } ++/* flashcontrol action+opcodes for ST flashes */ ++#define SFLASH_ST_WREN 0x0006 /* Write Enable */ ++#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ ++#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ ++#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ ++#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ ++#define SFLASH_ST_PP 0x0302 /* Page Program */ ++#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ ++#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ ++#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ ++#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ + -+ return NULL; -+} ++/* Status register bits for ST flashes */ ++#define SFLASH_ST_WIP 0x01 /* Write In Progress */ ++#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ ++#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ ++#define SFLASH_ST_BP_SHIFT 2 ++#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ + -+#endif /* !MODULE */ ++/* flashcontrol action+opcodes for Atmel flashes */ ++#define SFLASH_AT_READ 0x07e8 ++#define SFLASH_AT_PAGE_READ 0x07d2 ++#define SFLASH_AT_BUF1_READ ++#define SFLASH_AT_BUF2_READ ++#define SFLASH_AT_STATUS 0x01d7 ++#define SFLASH_AT_BUF1_WRITE 0x0384 ++#define SFLASH_AT_BUF2_WRITE 0x0387 ++#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 ++#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 ++#define SFLASH_AT_BUF1_PROGRAM 0x0288 ++#define SFLASH_AT_BUF2_PROGRAM 0x0289 ++#define SFLASH_AT_PAGE_ERASE 0x0281 ++#define SFLASH_AT_BLOCK_ERASE 0x0250 ++#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 ++#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 ++#define SFLASH_AT_BUF1_LOAD 0x0253 ++#define SFLASH_AT_BUF2_LOAD 0x0255 ++#define SFLASH_AT_BUF1_COMPARE 0x0260 ++#define SFLASH_AT_BUF2_COMPARE 0x0261 ++#define SFLASH_AT_BUF1_REPROGRAM 0x0258 ++#define SFLASH_AT_BUF2_REPROGRAM 0x0259 + -+extern char * _nvram_get(const char *name); -+extern int _nvram_set(const char *name, const char *value); -+extern int _nvram_unset(const char *name); -+extern int _nvram_getall(char *buf, int count); -+extern int _nvram_commit(struct nvram_header *header); -+extern int _nvram_init(void); -+extern void _nvram_exit(void); ++/* Status register bits for Atmel flashes */ ++#define SFLASH_AT_READY 0x80 ++#define SFLASH_AT_MISMATCH 0x40 ++#define SFLASH_AT_ID_MASK 0x38 ++#define SFLASH_AT_ID_SHIFT 3 + -+/* Globals */ -+static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED; -+static struct semaphore nvram_sem; -+static unsigned long nvram_offset = 0; -+static int nvram_major = -1; -+static devfs_handle_t nvram_handle = NULL; -+static struct mtd_info *nvram_mtd = NULL; -+ -+int -+_nvram_read(char *buf) -+{ -+ struct nvram_header *header = (struct nvram_header *) buf; -+ size_t len; -+ -+ if (!nvram_mtd || -+ MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) || -+ len != NVRAM_SPACE || -+ header->magic != NVRAM_MAGIC) { -+ /* Maybe we can recover some data from early initialization */ -+ memcpy(buf, nvram_buf, NVRAM_SPACE); -+ } -+ -+ return 0; -+} -+ -+struct nvram_tuple * -+_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value) -+{ -+ if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE) -+ return NULL; -+ -+ if (!t) { -+ if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC))) -+ return NULL; ++/* OTP regions */ ++#define OTP_HW_REGION OTPS_HW_PROTECT ++#define OTP_SW_REGION OTPS_SW_PROTECT ++#define OTP_CID_REGION OTPS_CID_PROTECT + -+ /* Copy name */ -+ t->name = (char *) &t[1]; -+ strcpy(t->name, name); ++/* OTP regions (Byte offsets from otp size) */ ++#define OTP_SWLIM_OFF (-8) ++#define OTP_CIDBASE_OFF 0 ++#define OTP_CIDLIM_OFF 8 + -+ t->value = NULL; -+ } ++/* Predefined OTP words (Word offset from otp size) */ ++#define OTP_BOUNDARY_OFF (-4) ++#define OTP_HWSIGN_OFF (-3) ++#define OTP_SWSIGN_OFF (-2) ++#define OTP_CIDSIGN_OFF (-1) + -+ /* Copy value */ -+ if (!t->value || strcmp(t->value, value)) { -+ t->value = &nvram_buf[nvram_offset]; -+ strcpy(t->value, value); -+ nvram_offset += strlen(value) + 1; -+ } ++#define OTP_CID_OFF 0 ++#define OTP_PKG_OFF 1 ++#define OTP_FID_OFF 2 ++#define OTP_RSV_OFF 3 ++#define OTP_LIM_OFF 4 + -+ return t; -+} ++#define OTP_SIGNATURE 0x578a ++#define OTP_MAGIC 0x4e56 + -+void -+_nvram_free(struct nvram_tuple *t) -+{ -+ if (!t) -+ nvram_offset = 0; -+ else -+ kfree(t); -+} ++/* ++ * These are the UART port assignments, expressed as offsets from the base ++ * register. These assignments should hold for any serial port based on ++ * a 8250, 16450, or 16550(A). ++ */ + -+int -+nvram_set(const char *name, const char *value) -+{ -+ unsigned long flags; -+ int ret; -+ struct nvram_header *header; ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_IIR 2 /* In: Interrupt Identity Register */ ++#define UART_FCR 2 /* Out: FIFO Control Register */ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_RXRDY 0x01 /* Receiver ready */ ++#define UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */ + -+ spin_lock_irqsave(&nvram_lock, flags); -+ if ((ret = _nvram_set(name, value))) { -+ /* Consolidate space and try again */ -+ if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) { -+ if (_nvram_commit(header) == 0) -+ ret = _nvram_set(name, value); -+ kfree(header); -+ } -+ } -+ spin_unlock_irqrestore(&nvram_lock, flags); ++/* Interrupt Enable Register (IER) bits */ ++#define UART_IER_EDSSI 8 /* enable modem status interrupt */ ++#define UART_IER_ELSI 4 /* enable receiver line status interrupt */ ++#define UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */ ++#define UART_IER_ERBFI 1 /* enable data available interrupt */ + -+ return ret; -+} ++#endif /* _SBCHIPC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h +--- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,369 @@ ++/* ++ * Broadcom SiliconBackplane hardware register definitions. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbconfig.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $ ++ */ + -+char * -+real_nvram_get(const char *name) -+{ -+ unsigned long flags; -+ char *value; ++#ifndef _SBCONFIG_H ++#define _SBCONFIG_H + -+ spin_lock_irqsave(&nvram_lock, flags); -+ value = _nvram_get(name); -+ spin_unlock_irqrestore(&nvram_lock, flags); ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif + -+ return value; -+} ++/* ++ * SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ ++#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define SB_PCI_MEM_SZ (64 * 1024 * 1024) ++#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ ++#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ + -+char * -+nvram_get(const char *name) -+{ -+ if (nvram_major >= 0) -+ return real_nvram_get(name); -+ else -+ return early_nvram_get(name); -+} ++#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ ++#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ + -+int -+nvram_unset(const char *name) -+{ -+ unsigned long flags; -+ int ret; ++#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ ++#define SB_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ ++#define SB_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ + -+ spin_lock_irqsave(&nvram_lock, flags); -+ ret = _nvram_unset(name); -+ spin_unlock_irqrestore(&nvram_lock, flags); ++#define SB_ROM 0x20000000 /* ARM ROM */ ++#define SB_SRAM2 0x80000000 /* ARM SRAM Region 2 */ ++#define SB_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */ ++#define SB_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */ + -+ return ret; -+} ++#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ ++#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++#define SB_EUART (SB_EXTIF_BASE + 0x00800000) ++#define SB_LED (SB_EXTIF_BASE + 0x00900000) + -+static void -+erase_callback(struct erase_info *done) -+{ -+ wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv; -+ wake_up(wait_q); -+} + -+int -+nvram_commit(void) -+{ -+ char *buf; -+ size_t erasesize, len; -+ unsigned int i; -+ int ret; -+ struct nvram_header *header; -+ unsigned long flags; -+ u_int32_t offset; -+ DECLARE_WAITQUEUE(wait, current); -+ wait_queue_head_t wait_q; -+ struct erase_info erase; ++/* enumeration space related defs */ ++#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ ++#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) ++#define SB_MAXFUNCS 4 /* max. # functions per core */ ++#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ ++#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ + -+ if (!nvram_mtd) { -+ printk("nvram_commit: NVRAM not found\n"); -+ return -ENODEV; -+ } ++/* mips address */ ++#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + -+ if (in_interrupt()) { -+ printk("nvram_commit: not committing in interrupt\n"); -+ return -EINVAL; -+ } ++/* ++ * Sonics Configuration Space Registers. ++ */ ++#define SBIPSFLAG 0x08 ++#define SBTPSFLAG 0x18 ++#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ ++#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ ++#define SBADMATCH3 0x60 ++#define SBADMATCH2 0x68 ++#define SBADMATCH1 0x70 ++#define SBIMSTATE 0x90 ++#define SBINTVEC 0x94 ++#define SBTMSTATELOW 0x98 ++#define SBTMSTATEHIGH 0x9c ++#define SBBWA0 0xa0 ++#define SBIMCONFIGLOW 0xa8 ++#define SBIMCONFIGHIGH 0xac ++#define SBADMATCH0 0xb0 ++#define SBTMCONFIGLOW 0xb8 ++#define SBTMCONFIGHIGH 0xbc ++#define SBBCONFIG 0xc0 ++#define SBBSTATE 0xc8 ++#define SBACTCNFG 0xd8 ++#define SBFLAGST 0xe8 ++#define SBIDLOW 0xf8 ++#define SBIDHIGH 0xfc + -+ /* Backup sector blocks to be erased */ -+ erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize); -+ if (!(buf = kmalloc(erasesize, GFP_KERNEL))) { -+ printk("nvram_commit: out of memory\n"); -+ return -ENOMEM; -+ } ++/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have ++ * a few registers *below* that line. I think it would be very confusing to try ++ * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here, ++ */ + -+ down(&nvram_sem); ++#define SBIMERRLOGA 0xea8 ++#define SBIMERRLOG 0xeb0 ++#define SBTMPORTCONNID0 0xed8 ++#define SBTMPORTLOCK0 0xef8 + -+ if ((i = erasesize - NVRAM_SPACE) > 0) { -+ offset = nvram_mtd->size - erasesize; -+ len = 0; -+ ret = MTD_READ(nvram_mtd, offset, i, &len, buf); -+ if (ret || len != i) { -+ printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i); -+ ret = -EIO; -+ goto done; -+ } -+ header = (struct nvram_header *)(buf + i); -+ } else { -+ offset = nvram_mtd->size - NVRAM_SPACE; -+ header = (struct nvram_header *)buf; -+ } ++#ifndef _LANGUAGE_ASSEMBLY + -+ /* Regenerate NVRAM */ -+ spin_lock_irqsave(&nvram_lock, flags); -+ ret = _nvram_commit(header); -+ spin_unlock_irqrestore(&nvram_lock, flags); -+ if (ret) -+ goto done; -+ -+ /* Erase sector blocks */ -+ init_waitqueue_head(&wait_q); -+ for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) { -+ erase.mtd = nvram_mtd; -+ erase.addr = offset; -+ erase.len = nvram_mtd->erasesize; -+ erase.callback = erase_callback; -+ erase.priv = (u_long) &wait_q; ++typedef volatile struct _sbconfig { ++ uint32 PAD[2]; ++ uint32 sbipsflag; /* initiator port ocp slave flag */ ++ uint32 PAD[3]; ++ uint32 sbtpsflag; /* target port ocp slave flag */ ++ uint32 PAD[11]; ++ uint32 sbtmerrloga; /* (sonics >= 2.3) */ ++ uint32 PAD; ++ uint32 sbtmerrlog; /* (sonics >= 2.3) */ ++ uint32 PAD[3]; ++ uint32 sbadmatch3; /* address match3 */ ++ uint32 PAD; ++ uint32 sbadmatch2; /* address match2 */ ++ uint32 PAD; ++ uint32 sbadmatch1; /* address match1 */ ++ uint32 PAD[7]; ++ uint32 sbimstate; /* initiator agent state */ ++ uint32 sbintvec; /* interrupt mask */ ++ uint32 sbtmstatelow; /* target state */ ++ uint32 sbtmstatehigh; /* target state */ ++ uint32 sbbwa0; /* bandwidth allocation table0 */ ++ uint32 PAD; ++ uint32 sbimconfiglow; /* initiator configuration */ ++ uint32 sbimconfighigh; /* initiator configuration */ ++ uint32 sbadmatch0; /* address match0 */ ++ uint32 PAD; ++ uint32 sbtmconfiglow; /* target configuration */ ++ uint32 sbtmconfighigh; /* target configuration */ ++ uint32 sbbconfig; /* broadcast configuration */ ++ uint32 PAD; ++ uint32 sbbstate; /* broadcast state */ ++ uint32 PAD[3]; ++ uint32 sbactcnfg; /* activate configuration */ ++ uint32 PAD[3]; ++ uint32 sbflagst; /* current sbflags */ ++ uint32 PAD[3]; ++ uint32 sbidlow; /* identification */ ++ uint32 sbidhigh; /* identification */ ++} sbconfig_t; + -+ set_current_state(TASK_INTERRUPTIBLE); -+ add_wait_queue(&wait_q, &wait); ++#endif /* _LANGUAGE_ASSEMBLY */ + -+ /* Unlock sector blocks */ -+ if (nvram_mtd->unlock) -+ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize); ++/* sbipsflag */ ++#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ ++#define SBIPS_INT1_SHIFT 0 ++#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ ++#define SBIPS_INT2_SHIFT 8 ++#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ ++#define SBIPS_INT3_SHIFT 16 ++#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ ++#define SBIPS_INT4_SHIFT 24 + -+ if ((ret = MTD_ERASE(nvram_mtd, &erase))) { -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&wait_q, &wait); -+ printk("nvram_commit: erase error\n"); -+ goto done; -+ } ++/* sbtpsflag */ ++#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ ++#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ + -+ /* Wait for erase to finish */ -+ schedule(); -+ remove_wait_queue(&wait_q, &wait); -+ } ++/* sbtmerrlog */ ++#define SBTMEL_CM 0x00000007 /* command */ ++#define SBTMEL_CI 0x0000ff00 /* connection id */ ++#define SBTMEL_EC 0x0f000000 /* error code */ ++#define SBTMEL_ME 0x80000000 /* multiple error */ + -+ /* Write partition up to end of data area */ -+ offset = nvram_mtd->size - erasesize; -+ i = erasesize - NVRAM_SPACE + header->len; -+ ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf); -+ if (ret || len != i) { -+ printk("nvram_commit: write error\n"); -+ ret = -EIO; -+ goto done; -+ } ++/* sbimstate */ ++#define SBIM_PC 0xf /* pipecount */ ++#define SBIM_AP_MASK 0x30 /* arbitration policy */ ++#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ ++#define SBIM_AP_TS 0x10 /* use timesliaces only */ ++#define SBIM_AP_TK 0x20 /* use token only */ ++#define SBIM_AP_RSV 0x30 /* reserved */ ++#define SBIM_IBE 0x20000 /* inbanderror */ ++#define SBIM_TO 0x40000 /* timeout */ ++#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ ++#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ + -+ offset = nvram_mtd->size - erasesize; -+ ret = MTD_READ(nvram_mtd, offset, 4, &len, buf); ++/* sbtmstatelow */ ++#define SBTML_RESET 0x1 /* reset */ ++#define SBTML_REJ_MASK 0x6 /* reject */ ++#define SBTML_REJ_SHIFT 1 ++#define SBTML_CLK 0x10000 /* clock enable */ ++#define SBTML_FGC 0x20000 /* force gated clocks on */ ++#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ ++#define SBTML_PE 0x40000000 /* pme enable */ ++#define SBTML_BE 0x80000000 /* bist enable */ + -+ done: -+ up(&nvram_sem); -+ kfree(buf); -+ return ret; -+} ++/* sbtmstatehigh */ ++#define SBTMH_SERR 0x1 /* serror */ ++#define SBTMH_INT 0x2 /* interrupt */ ++#define SBTMH_BUSY 0x4 /* busy */ ++#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ ++#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ ++#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ ++#define SBTMH_GCR 0x20000000 /* gated clock request */ ++#define SBTMH_BISTF 0x40000000 /* bist failed */ ++#define SBTMH_BISTD 0x80000000 /* bist done */ + -+int -+nvram_getall(char *buf, int count) -+{ -+ unsigned long flags; -+ int ret; + -+ spin_lock_irqsave(&nvram_lock, flags); -+ ret = _nvram_getall(buf, count); -+ spin_unlock_irqrestore(&nvram_lock, flags); ++/* sbbwa0 */ ++#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ ++#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ ++#define SBBWA_TAB1_SHIFT 16 + -+ return ret; -+} ++/* sbimconfiglow */ ++#define SBIMCL_STO_MASK 0x7 /* service timeout */ ++#define SBIMCL_RTO_MASK 0x70 /* request timeout */ ++#define SBIMCL_RTO_SHIFT 4 ++#define SBIMCL_CID_MASK 0xff0000 /* connection id */ ++#define SBIMCL_CID_SHIFT 16 + -+EXPORT_SYMBOL(nvram_get); -+EXPORT_SYMBOL(nvram_getall); -+EXPORT_SYMBOL(nvram_set); -+EXPORT_SYMBOL(nvram_unset); -+EXPORT_SYMBOL(nvram_commit); ++/* sbimconfighigh */ ++#define SBIMCH_IEM_MASK 0xc /* inband error mode */ ++#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ ++#define SBIMCH_TEM_SHIFT 4 ++#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ ++#define SBIMCH_BEM_SHIFT 6 + -+/* User mode interface below */ ++/* sbadmatch0 */ ++#define SBAM_TYPE_MASK 0x3 /* address type */ ++#define SBAM_AD64 0x4 /* reserved */ ++#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ ++#define SBAM_ADINT0_SHIFT 3 ++#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ ++#define SBAM_ADINT1_SHIFT 3 ++#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ ++#define SBAM_ADINT2_SHIFT 3 ++#define SBAM_ADEN 0x400 /* enable */ ++#define SBAM_ADNEG 0x800 /* negative decode */ ++#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ ++#define SBAM_BASE0_SHIFT 8 ++#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ ++#define SBAM_BASE1_SHIFT 12 ++#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ ++#define SBAM_BASE2_SHIFT 16 + -+static ssize_t -+dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos) -+{ -+ char tmp[100], *name = tmp, *value; -+ ssize_t ret; -+ unsigned long off; ++/* sbtmconfiglow */ ++#define SBTMCL_CD_MASK 0xff /* clock divide */ ++#define SBTMCL_CO_MASK 0xf800 /* clock offset */ ++#define SBTMCL_CO_SHIFT 11 ++#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ ++#define SBTMCL_IF_SHIFT 18 ++#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ ++#define SBTMCL_IM_SHIFT 24 + -+ if (count > sizeof(tmp)) { -+ if (!(name = kmalloc(count, GFP_KERNEL))) -+ return -ENOMEM; -+ } ++/* sbtmconfighigh */ ++#define SBTMCH_BM_MASK 0x3 /* busy mode */ ++#define SBTMCH_RM_MASK 0x3 /* retry mode */ ++#define SBTMCH_RM_SHIFT 2 ++#define SBTMCH_SM_MASK 0x30 /* stop mode */ ++#define SBTMCH_SM_SHIFT 4 ++#define SBTMCH_EM_MASK 0x300 /* sb error mode */ ++#define SBTMCH_EM_SHIFT 8 ++#define SBTMCH_IM_MASK 0xc00 /* int mode */ ++#define SBTMCH_IM_SHIFT 10 + -+ if (copy_from_user(name, buf, count)) { -+ ret = -EFAULT; -+ goto done; -+ } ++/* sbbconfig */ ++#define SBBC_LAT_MASK 0x3 /* sb latency */ ++#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ ++#define SBBC_MAX0_SHIFT 16 ++#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ ++#define SBBC_MAX1_SHIFT 20 + -+ if (*name == '\0') { -+ /* Get all variables */ -+ ret = nvram_getall(name, count); -+ if (ret == 0) { -+ if (copy_to_user(buf, name, count)) { -+ ret = -EFAULT; -+ goto done; -+ } -+ ret = count; -+ } -+ } else { -+ if (!(value = nvram_get(name))) { -+ ret = 0; -+ goto done; -+ } ++/* sbbstate */ ++#define SBBS_SRD 0x1 /* st reg disable */ ++#define SBBS_HRD 0x2 /* hold reg disable */ + -+ /* Provide the offset into mmap() space */ -+ off = (unsigned long) value - (unsigned long) nvram_buf; ++/* sbidlow */ ++#define SBIDL_CS_MASK 0x3 /* config space */ ++#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ ++#define SBIDL_AR_SHIFT 3 ++#define SBIDL_SYNCH 0x40 /* sync */ ++#define SBIDL_INIT 0x80 /* initiator */ ++#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ ++#define SBIDL_MINLAT_SHIFT 8 ++#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ ++#define SBIDL_MAXLAT_SHIFT 12 ++#define SBIDL_FIRST 0x10000 /* this initiator is first */ ++#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ ++#define SBIDL_CW_SHIFT 18 ++#define SBIDL_TP_MASK 0xf00000 /* target ports */ ++#define SBIDL_TP_SHIFT 20 ++#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ ++#define SBIDL_IP_SHIFT 24 ++#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ ++#define SBIDL_RV_SHIFT 28 ++#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ ++#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ + -+ if (put_user(off, (unsigned long *) buf)) { -+ ret = -EFAULT; -+ goto done; -+ } ++/* sbidhigh */ ++#define SBIDH_RC_MASK 0x000f /* revision code */ ++#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ ++#define SBIDH_RCE_SHIFT 8 ++#define SBCOREREV(sbidh) \ ++ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) ++#define SBIDH_CC_MASK 0x8ff0 /* core code */ ++#define SBIDH_CC_SHIFT 4 ++#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ ++#define SBIDH_VC_SHIFT 16 + -+ ret = sizeof(unsigned long); -+ } ++#define SB_COMMIT 0xfd8 /* update buffered registers value */ + -+ flush_cache_all(); -+ -+done: -+ if (name != tmp) -+ kfree(name); ++/* vendor codes */ ++#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ + -+ return ret; -+} ++/* core codes */ ++#define SB_NODEV 0x700 /* Invalid coreid */ ++#define SB_CC 0x800 /* chipcommon core */ ++#define SB_ILINE20 0x801 /* iline20 core */ ++#define SB_SDRAM 0x803 /* sdram core */ ++#define SB_PCI 0x804 /* pci core */ ++#define SB_MIPS 0x805 /* mips core */ ++#define SB_ENET 0x806 /* enet mac core */ ++#define SB_CODEC 0x807 /* v90 codec core */ ++#define SB_USB 0x808 /* usb 1.1 host/device core */ ++#define SB_ADSL 0x809 /* ADSL core */ ++#define SB_ILINE100 0x80a /* iline100 core */ ++#define SB_IPSEC 0x80b /* ipsec core */ ++#define SB_PCMCIA 0x80d /* pcmcia core */ ++#define SB_SDIOD SB_PCMCIA /* pcmcia core has sdio device */ ++#define SB_SOCRAM 0x80e /* internal memory core */ ++#define SB_MEMC 0x80f /* memc sdram core */ ++#define SB_EXTIF 0x811 /* external interface core */ ++#define SB_D11 0x812 /* 802.11 MAC core */ ++#define SB_MIPS33 0x816 /* mips3302 core */ ++#define SB_USB11H 0x817 /* usb 1.1 host core */ ++#define SB_USB11D 0x818 /* usb 1.1 device core */ ++#define SB_USB20H 0x819 /* usb 2.0 host core */ ++#define SB_USB20D 0x81a /* usb 2.0 device core */ ++#define SB_SDIOH 0x81b /* sdio host core */ ++#define SB_ROBO 0x81c /* roboswitch core */ ++#define SB_ATA100 0x81d /* parallel ATA core */ ++#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ ++#define SB_GIGETH 0x81f /* gigabit ethernet core */ ++#define SB_PCIE 0x820 /* pci express core */ ++#define SB_MIMO 0x821 /* MIMO phy core */ ++#define SB_SRAMC 0x822 /* SRAM controller core */ ++#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ ++#define SB_ARM11 0x824 /* ARM 1176 core */ ++#define SB_ARM7 0x825 /* ARM 7tdmi core */ + -+static ssize_t -+dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos) -+{ -+ char tmp[100], *name = tmp, *value; -+ ssize_t ret; ++#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ + -+ if (count > sizeof(tmp)) { -+ if (!(name = kmalloc(count, GFP_KERNEL))) -+ return -ENOMEM; -+ } ++/* Not really related to Silicon Backplane, but a couple of software ++ * conventions for the use the flash space: ++ */ + -+ if (copy_from_user(name, buf, count)) { -+ ret = -EFAULT; -+ goto done; -+ } ++/* Minumum amount of flash we support */ ++#define FLASH_MIN 0x00020000 /* Minimum flash size */ + -+ value = name; -+ name = strsep(&value, "="); -+ if (value) -+ ret = nvram_set(name, value) ? : count; -+ else -+ ret = nvram_unset(name) ? : count; ++/* A boot/binary may have an embedded block that describes its size */ ++#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ ++#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ ++#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ ++#define BISZ_TXTST_IDX 1 /* 1: text start */ ++#define BISZ_TXTEND_IDX 2 /* 2: text start */ ++#define BISZ_DATAST_IDX 3 /* 3: text start */ ++#define BISZ_DATAEND_IDX 4 /* 4: text start */ ++#define BISZ_BSSST_IDX 5 /* 5: text start */ ++#define BISZ_BSSEND_IDX 6 /* 6: text start */ ++#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ + -+ done: -+ if (name != tmp) -+ kfree(name); ++#endif /* _SBCONFIG_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h +--- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,243 @@ ++/* ++ * Hardware-specific External Interface I/O core definitions ++ * for the BCM47xx family of SiliconBackplane-based chips. ++ * ++ * The External Interface core supports a total of three external chip selects ++ * supporting external interfaces. One of the external chip selects is ++ * used for Flash, one is used for PCMCIA, and the other may be ++ * programmed to support either a synchronous interface or an ++ * asynchronous interface. The asynchronous interface can be used to ++ * support external devices such as UARTs and the BCM2019 Bluetooth ++ * baseband processor. ++ * The external interface core also contains 2 on-chip 16550 UARTs, clock ++ * frequency control, a watchdog interrupt timer, and a GPIO interface. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ ++ */ + -+ return ret; -+} ++#ifndef _SBEXTIF_H ++#define _SBEXTIF_H + -+static int -+dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ if (cmd != NVRAM_MAGIC) -+ return -EINVAL; -+ return nvram_commit(); -+} ++/* external interface address space */ ++#define EXTIF_PCMCIA_MEMBASE(x) (x) ++#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) ++#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) ++#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) ++#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) + -+static int -+dev_nvram_mmap(struct file *file, struct vm_area_struct *vma) -+{ -+ unsigned long offset = virt_to_phys(nvram_buf); ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ + -+ if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start, -+ vma->vm_page_prot)) -+ return -EAGAIN; ++/* ++ * The multiple instances of output and output enable registers ++ * are present to allow driver software for multiple cores to control ++ * gpio outputs without needing to share a single register pair. ++ */ ++struct gpiouser { ++ uint32 out; ++ uint32 outen; ++}; ++#define NGPIOUSER 5 + -+ return 0; -+} ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 extstatus; ++ uint32 PAD[2]; + -+static int -+dev_nvram_open(struct inode *inode, struct file * file) -+{ -+ MOD_INC_USE_COUNT; -+ return 0; -+} ++ /* pcmcia control registers */ ++ uint32 pcmcia_config; ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; + -+static int -+dev_nvram_release(struct inode *inode, struct file * file) -+{ -+ MOD_DEC_USE_COUNT; -+ return 0; -+} ++ /* programmable interface control registers */ ++ uint32 prog_config; ++ uint32 prog_waitcount; + -+static struct file_operations dev_nvram_fops = { -+ owner: THIS_MODULE, -+ open: dev_nvram_open, -+ release: dev_nvram_release, -+ read: dev_nvram_read, -+ write: dev_nvram_write, -+ ioctl: dev_nvram_ioctl, -+ mmap: dev_nvram_mmap, -+}; ++ /* flash control registers */ ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[4]; + -+static void -+dev_nvram_exit(void) -+{ -+ int order = 0; -+ struct page *page, *end; ++ uint32 watchdog; + -+ if (nvram_handle) -+ devfs_unregister(nvram_handle); ++ /* clock control */ ++ uint32 clockcontrol_n; ++ uint32 clockcontrol_sb; ++ uint32 clockcontrol_pci; ++ uint32 clockcontrol_mii; ++ uint32 PAD[3]; + -+ if (nvram_major >= 0) -+ devfs_unregister_chrdev(nvram_major, "nvram"); ++ /* gpio */ ++ uint32 gpioin; ++ struct gpiouser gpio[NGPIOUSER]; ++ uint32 PAD; ++ uint32 ejtagouten; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[153]; + -+ if (nvram_mtd) -+ put_mtd_device(nvram_mtd); ++ uint8 uartdata; ++ uint8 PAD[3]; ++ uint8 uartimer; ++ uint8 PAD[3]; ++ uint8 uartfcr; ++ uint8 PAD[3]; ++ uint8 uartlcr; ++ uint8 PAD[3]; ++ uint8 uartmcr; ++ uint8 PAD[3]; ++ uint8 uartlsr; ++ uint8 PAD[3]; ++ uint8 uartmsr; ++ uint8 PAD[3]; ++ uint8 uartscratch; ++ uint8 PAD[3]; ++} extifregs_t; + -+ while ((PAGE_SIZE << order) < NVRAM_SPACE) -+ order++; -+ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); -+ for (page = virt_to_page(nvram_buf); page <= end; page++) -+ mem_map_unreserve(page); ++/* corecontrol */ ++#define CC_UE (1 << 0) /* uart enable */ + -+ _nvram_exit(); -+} ++/* extstatus */ ++#define ES_EM (1 << 0) /* endian mode (ro) */ ++#define ES_EI (1 << 1) /* external interrupt pin (ro) */ ++#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ + -+static int __init -+dev_nvram_init(void) -+{ -+ int order = 0, ret = 0; -+ struct page *page, *end; -+ unsigned int i; ++/* gpio bit mask */ ++#define GPIO_BIT0 (1 << 0) ++#define GPIO_BIT1 (1 << 1) ++#define GPIO_BIT2 (1 << 2) ++#define GPIO_BIT3 (1 << 3) ++#define GPIO_BIT4 (1 << 4) ++#define GPIO_BIT5 (1 << 5) ++#define GPIO_BIT6 (1 << 6) ++#define GPIO_BIT7 (1 << 7) + -+ /* Allocate and reserve memory to mmap() */ -+ while ((PAGE_SIZE << order) < NVRAM_SPACE) -+ order++; -+ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); -+ for (page = virt_to_page(nvram_buf); page <= end; page++) -+ mem_map_reserve(page); + -+#ifdef CONFIG_MTD -+ /* Find associated MTD device */ -+ for (i = 0; i < MAX_MTD_DEVICES; i++) { -+ nvram_mtd = get_mtd_device(NULL, i); -+ if (nvram_mtd) { -+ if (!strcmp(nvram_mtd->name, "nvram") && -+ nvram_mtd->size >= NVRAM_SPACE) -+ break; -+ put_mtd_device(nvram_mtd); -+ } -+ } -+ if (i >= MAX_MTD_DEVICES) -+ nvram_mtd = NULL; -+#endif ++/* pcmcia/prog/flash_config */ ++#define CF_EN (1 << 0) /* enable */ ++#define CF_EM_MASK 0xe /* mode */ ++#define CF_EM_SHIFT 1 ++#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ ++#define CF_EM_SYNC 0x2 /* synchronous mode */ ++#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ ++#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ ++#define CF_BS (1 << 5) /* byteswap */ ++#define CF_CD_MASK 0xc0 /* clock divider */ ++#define CF_CD_SHIFT 6 ++#define CF_CD_DIV2 0x0 /* backplane/2 */ ++#define CF_CD_DIV3 0x40 /* backplane/3 */ ++#define CF_CD_DIV4 0x80 /* backplane/4 */ ++#define CF_CE (1 << 8) /* clock enable */ ++#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ + -+ /* Initialize hash table lock */ -+ spin_lock_init(&nvram_lock); ++/* pcmcia_memwait */ ++#define PM_W0_MASK 0x3f /* waitcount0 */ ++#define PM_W1_MASK 0x1f00 /* waitcount1 */ ++#define PM_W1_SHIFT 8 ++#define PM_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PM_W2_SHIFT 16 ++#define PM_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PM_W3_SHIFT 24 + -+ /* Initialize commit semaphore */ -+ init_MUTEX(&nvram_sem); ++/* pcmcia_attrwait */ ++#define PA_W0_MASK 0x3f /* waitcount0 */ ++#define PA_W1_MASK 0x1f00 /* waitcount1 */ ++#define PA_W1_SHIFT 8 ++#define PA_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PA_W2_SHIFT 16 ++#define PA_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PA_W3_SHIFT 24 + -+ /* Register char device */ -+ if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) { -+ ret = nvram_major; -+ goto err; -+ } ++/* pcmcia_iowait */ ++#define PI_W0_MASK 0x3f /* waitcount0 */ ++#define PI_W1_MASK 0x1f00 /* waitcount1 */ ++#define PI_W1_SHIFT 8 ++#define PI_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PI_W2_SHIFT 16 ++#define PI_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PI_W3_SHIFT 24 + -+ /* Initialize hash table */ -+ _nvram_init(); ++/* prog_waitcount */ ++#define PW_W0_MASK 0x0000001f /* waitcount0 */ ++#define PW_W1_MASK 0x00001f00 /* waitcount1 */ ++#define PW_W1_SHIFT 8 ++#define PW_W2_MASK 0x001f0000 /* waitcount2 */ ++#define PW_W2_SHIFT 16 ++#define PW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PW_W3_SHIFT 24 + -+ /* Create /dev/nvram handle */ -+ nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0, -+ S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL); ++#define PW_W0 0x0000000c ++#define PW_W1 0x00000a00 ++#define PW_W2 0x00020000 ++#define PW_W3 0x01000000 + -+ /* Set the SDRAM NCDL value into NVRAM if not already done */ -+ if (getintvar(NULL, "sdram_ncdl") == 0) { -+ unsigned int ncdl; -+ char buf[] = "0x00000000"; ++/* flash_waitcount */ ++#define FW_W0_MASK 0x1f /* waitcount0 */ ++#define FW_W1_MASK 0x1f00 /* waitcount1 */ ++#define FW_W1_SHIFT 8 ++#define FW_W2_MASK 0x1f0000 /* waitcount2 */ ++#define FW_W2_SHIFT 16 ++#define FW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define FW_W3_SHIFT 24 + -+ if ((ncdl = sb_memc_get_ncdl(sbh))) { -+ sprintf(buf, "0x%08x", ncdl); -+ nvram_set("sdram_ncdl", buf); -+ nvram_commit(); -+ } -+ } ++/* watchdog */ ++#define WATCHDOG_CLOCK 48000000 /* Hz */ + -+ return 0; ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 + -+ err: -+ dev_nvram_exit(); -+ return ret; -+} ++/* clockcontrol_sb/pci/mii */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 + -+module_init(dev_nvram_init); -+module_exit(dev_nvram_exit); -diff -Nur linux-2.4.32/arch/mips/bcm947xx/pcibios.c linux-2.4.32-brcm/arch/mips/bcm947xx/pcibios.c ---- linux-2.4.32/arch/mips/bcm947xx/pcibios.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/pcibios.c 2005-12-16 23:39:10.944836750 +0100 -@@ -0,0 +1,355 @@ ++/* Clock control default values */ ++#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ ++#define CC_DEF_100 0x04020011 ++#define CC_DEF_33 0x11030011 ++#define CC_DEF_25 0x11050011 ++ ++/* Clock control values for 125Mhz */ ++#define CC_125_N 0x0802 ++#define CC_125_M 0x04020009 ++#define CC_125_M25 0x11090009 ++#define CC_125_M33 0x11090005 ++ ++/* Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 ++ ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ ++ ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 ++ ++#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ ++ ++#endif /* _SBEXTIF_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbhndmips.h linux.dev/arch/mips/bcm947xx/include/sbhndmips.h +--- linux.old/arch/mips/bcm947xx/include/sbhndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbhndmips.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,47 @@ +/* -+ * Low-Level PCI and SB support for BCM47xx (Linux support code) ++ * Broadcom SiliconBackplane MIPS definitions + * -+ * Copyright 2005, Broadcom Corporation ++ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane ++ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits ++ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP ++ * interface. The core revision is stored in the SB ID register in SB ++ * configuration space. ++ * ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -7360,358 +7159,399 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/pcibios.c linux-2.4.32-brcm/arch/mips/ + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id$ ++ * $Id: sbhndmips.h,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ + */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#ifndef _sbhndmips_h_ ++#define _sbhndmips_h_ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#include + -+/* Global SB handle */ -+extern sb_t *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; ++#ifndef _LANGUAGE_ASSEMBLY + -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ + -+static int -+sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value) -+{ -+ unsigned long flags; -+ int ret; ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 PAD[2]; ++ uint32 biststatus; ++ uint32 PAD[4]; ++ uint32 intstatus; ++ uint32 intmask; ++ uint32 timer; ++} mipsregs_t; + -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} ++#endif /* _LANGUAGE_ASSEMBLY */ + -+static int -+sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value) -+{ -+ unsigned long flags; -+ int ret; ++#endif /* _sbhndmips_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h +--- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,147 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbmemc.h,v 1.6 2006/03/02 12:33:44 honor Exp $ ++ */ + -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} ++#ifndef _SBMEMC_H ++#define _SBMEMC_H + -+static int -+sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value) -+{ -+ unsigned long flags; -+ int ret; ++#ifdef _LANGUAGE_ASSEMBLY + -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, value, sizeof(*value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} ++#define MEMC_CONTROL 0x00 ++#define MEMC_CONFIG 0x04 ++#define MEMC_REFRESH 0x08 ++#define MEMC_BISTSTAT 0x0c ++#define MEMC_MODEBUF 0x10 ++#define MEMC_BKCLS 0x14 ++#define MEMC_PRIORINV 0x18 ++#define MEMC_DRAMTIM 0x1c ++#define MEMC_INTSTAT 0x20 ++#define MEMC_INTMASK 0x24 ++#define MEMC_INTINFO 0x28 ++#define MEMC_NCDLCTL 0x30 ++#define MEMC_RDNCDLCOR 0x34 ++#define MEMC_WRNCDLCOR 0x38 ++#define MEMC_MISCDLYCTL 0x3c ++#define MEMC_DQSGATENCDL 0x40 ++#define MEMC_SPARE 0x44 ++#define MEMC_TPADDR 0x48 ++#define MEMC_TPDATA 0x4c ++#define MEMC_BARRIER 0x50 ++#define MEMC_CORE 0x54 + -+static int -+sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value) -+{ -+ unsigned long flags; -+ int ret; ++#else /* !_LANGUAGE_ASSEMBLY */ + -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} ++/* Sonics side: MEMC core registers */ ++typedef volatile struct sbmemcregs { ++ uint32 control; ++ uint32 config; ++ uint32 refresh; ++ uint32 biststat; ++ uint32 modebuf; ++ uint32 bkcls; ++ uint32 priorinv; ++ uint32 dramtim; ++ uint32 intstat; ++ uint32 intmask; ++ uint32 intinfo; ++ uint32 reserved1; ++ uint32 ncdlctl; ++ uint32 rdncdlcor; ++ uint32 wrncdlcor; ++ uint32 miscdlyctl; ++ uint32 dqsgatencdl; ++ uint32 spare; ++ uint32 tpaddr; ++ uint32 tpdata; ++ uint32 barrier; ++ uint32 core; ++} sbmemcregs_t; + -+static int -+sbpci_write_config_word(struct pci_dev *dev, int where, u16 value) -+{ -+ unsigned long flags; -+ int ret; ++#endif /* _LANGUAGE_ASSEMBLY */ + -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} ++/* MEMC Core Init values (OCP ID 0x80f) */ + -+static int -+sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value) -+{ -+ unsigned long flags; -+ int ret; ++/* For sdr: */ ++#define MEMC_SD_CONFIG_INIT 0x00048000 ++#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_SD_DRAMTIM3_INIT 0x000754da ++#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ ++#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b ++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ ++#define MEMC_SD_CONTROL_INIT0 0x00000002 ++#define MEMC_SD_CONTROL_INIT1 0x00000008 ++#define MEMC_SD_CONTROL_INIT2 0x00000004 ++#define MEMC_SD_CONTROL_INIT3 0x00000010 ++#define MEMC_SD_CONTROL_INIT4 0x00000001 ++#define MEMC_SD_MODEBUF_INIT 0x00000000 ++#define MEMC_SD_REFRESH_INIT 0x0000840f + -+ spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), where, &value, sizeof(value)); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} + -+static struct pci_ops pcibios_ops = { -+ sbpci_read_config_byte, -+ sbpci_read_config_word, -+ sbpci_read_config_dword, -+ sbpci_write_config_byte, -+ sbpci_write_config_word, -+ sbpci_write_config_dword -+}; ++/* This is for SDRM8X8X4 */ ++#define MEMC_SDR_INIT 0x0008 ++#define MEMC_SDR_MODE 0x32 ++#define MEMC_SDR_NCDL 0x00020032 ++#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ + ++/* For ddr: */ ++#define MEMC_CONFIG_INIT 0x00048000 ++#define MEMC_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_DRAMTIM25_INIT 0x000754d9 ++#define MEMC_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */ ++#define MEMC_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_1_WRNCDLCOR_INIT 0x14500200 ++#define MEMC_DQSGATENCDL_INIT 0x00030000 ++#define MEMC_MISCDLYCTL_INIT 0x21061c1b ++#define MEMC_1_MISCDLYCTL_INIT 0x21021400 ++#define MEMC_NCDLCTL_INIT 0x00002001 ++#define MEMC_CONTROL_INIT0 0x00000002 ++#define MEMC_CONTROL_INIT1 0x00000008 ++#define MEMC_MODEBUF_INIT0 0x00004000 ++#define MEMC_CONTROL_INIT2 0x00000010 ++#define MEMC_MODEBUF_INIT1 0x00000100 ++#define MEMC_CONTROL_INIT3 0x00000010 ++#define MEMC_CONTROL_INIT4 0x00000008 ++#define MEMC_REFRESH_INIT 0x0000840f ++#define MEMC_CONTROL_INIT5 0x00000004 ++#define MEMC_MODEBUF_INIT2 0x00000000 ++#define MEMC_CONTROL_INIT6 0x00000010 ++#define MEMC_CONTROL_INIT7 0x00000001 + -+void __init -+pcibios_init(void) -+{ -+ ulong flags; + -+ if (!(sbh = sb_kattach())) -+ panic("sb_kattach failed"); -+ spin_lock_init(&sbh_lock); ++/* This is for DDRM16X16X2 */ ++#define MEMC_DDR_INIT 0x0009 ++#define MEMC_DDR_MODE 0x62 ++#define MEMC_DDR_NCDL 0x0005050a ++#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ + -+ spin_lock_irqsave(&sbh_lock, flags); -+ sbpci_init(sbh); -+ spin_unlock_irqrestore(&sbh_lock, flags); ++/* mask for sdr/ddr calibration registers */ ++#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff ++#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff ++#define MEMC_DQSGATENCDL_G_MASK 0x000000ff + -+ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); ++/* masks for miscdlyctl registers */ ++#define MEMC_MISC_SM_MASK 0x30000000 ++#define MEMC_MISC_SM_SHIFT 28 ++#define MEMC_MISC_SD_MASK 0x0f000000 ++#define MEMC_MISC_SD_SHIFT 24 + -+ mdelay(300); //By Joey for Atheros Card ++/* hw threshhold for calculating wr/rd for sdr memc */ ++#define MEMC_CD_THRESHOLD 128 + -+ /* Scan the SB bus */ -+ pci_scan_bus(0, &pcibios_ops, NULL); ++/* Low bit of init register says if memc is ddr or sdr */ ++#define MEMC_CONFIG_DDR 0x00000001 + -+} ++#endif /* _SBMEMC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbpcie.h linux.dev/arch/mips/bcm947xx/include/sbpcie.h +--- linux.old/arch/mips/bcm947xx/include/sbpcie.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbpcie.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,200 @@ ++/* ++ * BCM43XX SiliconBackplane PCIE core hardware definitions. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbpcie.h,v 1.1.1.2 2006/02/27 03:43:16 honor Exp $ ++ */ + -+char * __init -+pcibios_setup(char *str) -+{ -+ if (!strncmp(str, "ban=", 4)) { -+ sbpci_ban(simple_strtoul(str + 4, NULL, 0)); -+ return NULL; -+ } ++#ifndef _SBPCIE_H ++#define _SBPCIE_H + -+ return (str); -+} ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif + -+static u32 pci_iobase = 0x100; -+static u32 pci_membase = SB_PCI_DMA; ++/* PCIE Enumeration space offsets */ ++#define PCIE_CORE_CONFIG_OFFSET 0x0 ++#define PCIE_FUNC0_CONFIG_OFFSET 0x400 ++#define PCIE_FUNC1_CONFIG_OFFSET 0x500 ++#define PCIE_FUNC2_CONFIG_OFFSET 0x600 ++#define PCIE_FUNC3_CONFIG_OFFSET 0x700 ++#define PCIE_SPROM_SHADOW_OFFSET 0x800 ++#define PCIE_SBCONFIG_OFFSET 0xE00 + -+void __init -+pcibios_fixup_bus(struct pci_bus *b) -+{ -+ struct list_head *ln; -+ struct pci_dev *d; -+ struct resource *res; -+ int pos, size; -+ u32 *base; -+ u8 irq; ++/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */ ++#define PCIE_DEV_BAR0_SIZE 0x4000 ++#define PCIE_BAR0_WINMAPCORE_OFFSET 0x0 ++#define PCIE_BAR0_EXTSPROM_OFFSET 0x1000 ++#define PCIE_BAR0_PCIECORE_OFFSET 0x2000 ++#define PCIE_BAR0_CCCOREREG_OFFSET 0x3000 + -+ printk("PCI: Fixing up bus %d\n", b->number); ++/* SB side: PCIE core and host control registers */ ++typedef struct sbpcieregs { ++ uint32 PAD[3]; ++ uint32 biststatus; /* bist Status: 0x00C */ ++ uint32 PAD[6]; ++ uint32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */ ++ uint32 PAD[54]; ++ uint32 sbtopcie0; /* sb to pcie translation 0: 0x100 */ ++ uint32 sbtopcie1; /* sb to pcie translation 1: 0x104 */ ++ uint32 sbtopcie2; /* sb to pcie translation 2: 0x108 */ ++ uint32 PAD[4]; + -+ /* Fix up SB */ -+ if (b->number == 0) { -+ for (ln=b->devices.next; ln != &b->devices; ln=ln->next) { -+ d = pci_dev_b(ln); -+ /* Fix up interrupt lines */ -+ pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq); -+ d->irq = irq + 2; -+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -+ } -+ } ++ /* pcie core supports in direct access to config space */ ++ uint32 configaddr; /* pcie config space access: Address field: 0x120 */ ++ uint32 configdata; /* pcie config space access: Data field: 0x124 */ + -+ /* Fix up external PCI */ -+ else { -+ for (ln=b->devices.next; ln != &b->devices; ln=ln->next) { -+ d = pci_dev_b(ln); -+ /* Fix up resource bases */ -+ for (pos = 0; pos < 6; pos++) { -+ res = &d->resource[pos]; -+ base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase; -+ if (res->end) { -+ size = res->end - res->start + 1; -+ if (*base & (size - 1)) -+ *base = (*base + size) & ~(size - 1); -+ res->start = *base; -+ res->end = res->start + size - 1; -+ *base += size; -+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -+ } -+ /* Fix up PCI bridge BAR0 only */ -+ if (b->number == 1 && PCI_SLOT(d->devfn) == 0) -+ break; -+ } -+ /* Fix up interrupt lines */ -+ if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL)) -+ d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq; -+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -+ } -+ } -+} ++ /* mdio access to serdes */ ++ uint32 mdiocontrol; /* controls the mdio access: 0x128 */ ++ uint32 mdiodata; /* Data to the mdio access: 0x12c */ + -+unsigned int -+pcibios_assign_all_busses(void) -+{ -+ return 1; -+} -+ -+void -+pcibios_align_resource(void *data, struct resource *res, -+ unsigned long size, unsigned long align) -+{ -+} -+ -+int -+pcibios_enable_resources(struct pci_dev *dev) -+{ -+ u16 cmd, old_cmd; -+ int idx; -+ struct resource *r; -+ -+ /* External PCI only */ -+ if (dev->bus->number == 0) -+ return 0; -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ old_cmd = cmd; -+ for(idx=0; idx<6; idx++) { -+ r = &dev->resource[idx]; -+ if (r->flags & IORESOURCE_IO) -+ cmd |= PCI_COMMAND_IO; -+ if (r->flags & IORESOURCE_MEM) -+ cmd |= PCI_COMMAND_MEMORY; -+ } -+ if (dev->resource[PCI_ROM_RESOURCE].start) -+ cmd |= PCI_COMMAND_MEMORY; -+ if (cmd != old_cmd) { -+ printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ } -+ return 0; -+} -+ -+int -+pcibios_enable_device(struct pci_dev *dev, int mask) -+{ -+ ulong flags; -+ uint coreidx; -+ -+ /* External PCI device enable */ -+ if (dev->bus->number != 0) -+ return pcibios_enable_resources(dev); ++ /* pcie protocol phy/dllp/tlp register access mechanism */ ++ uint32 pcieaddr; /* address of the internal registeru: 0x130 */ ++ uint32 pciedata; /* Data to/from the internal regsiter: 0x134 */ + -+ /* These cores come out of reset enabled */ -+ if (dev->device == SB_MIPS || -+ dev->device == SB_MIPS33 || -+ dev->device == SB_EXTIF || -+ dev->device == SB_CC) -+ return 0; ++ uint32 PAD[434]; ++ uint16 sprom[36]; /* SPROM shadow Area */ ++} sbpcieregs_t; + -+ spin_lock_irqsave(&sbh_lock, flags); -+ coreidx = sb_coreidx(sbh); -+ if (!sb_setcoreidx(sbh, PCI_SLOT(dev->devfn))) -+ return PCIBIOS_DEVICE_NOT_FOUND; ++/* SB to PCIE translation masks */ ++#define SBTOPCIE0_MASK 0xfc000000 ++#define SBTOPCIE1_MASK 0xfc000000 ++#define SBTOPCIE2_MASK 0xc0000000 + -+ /* -+ * The USB core requires a special bit to be set during core -+ * reset to enable host (OHCI) mode. Resetting the SB core in -+ * pcibios_enable_device() is a hack for compatibility with -+ * vanilla usb-ohci so that it does not have to know about -+ * SB. A driver that wants to use the USB core in device mode -+ * should know about SB and should reset the bit back to 0 -+ * after calling pcibios_enable_device(). -+ */ -+ if (sb_coreid(sbh) == SB_USB) { -+ sb_core_disable(sbh, sb_coreflags(sbh, 0, 0)); -+ sb_core_reset(sbh, 1 << 29); -+ } else -+ sb_core_reset(sbh, 0); ++/* Access type bits (0:1) */ ++#define SBTOPCIE_MEM 0 ++#define SBTOPCIE_IO 1 ++#define SBTOPCIE_CFG0 2 ++#define SBTOPCIE_CFG1 3 + -+ sb_setcoreidx(sbh, coreidx); -+ spin_unlock_irqrestore(&sbh_lock, flags); -+ -+ return 0; -+} ++/* Prefetch enable bit 2 */ ++#define SBTOPCIE_PF 4 + -+void -+pcibios_update_resource(struct pci_dev *dev, struct resource *root, -+ struct resource *res, int resource) -+{ -+ unsigned long where, size; -+ u32 reg; ++/* Write Burst enable for memory write bit 3 */ ++#define SBTOPCIE_WR_BURST 8 + -+ /* External PCI only */ -+ if (dev->bus->number == 0) -+ return; ++/* config access */ ++#define CONFIGADDR_FUNC_MASK 0x7000 ++#define CONFIGADDR_FUNC_SHF 12 ++#define CONFIGADDR_REG_MASK 0x0FFF ++#define CONFIGADDR_REG_SHF 0 + -+ where = PCI_BASE_ADDRESS_0 + (resource * 4); -+ size = res->end - res->start; -+ pci_read_config_dword(dev, where, ®); -+ reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); -+ pci_write_config_dword(dev, where, reg); -+} ++/* PCIE protocol regs Indirect Address */ ++#define PCIEADDR_PROT_MASK 0x300 ++#define PCIEADDR_PROT_SHF 8 ++#define PCIEADDR_PL_TLP 0 ++#define PCIEADDR_PL_DLLP 1 ++#define PCIEADDR_PL_PLP 2 + -+static void __init -+quirk_sbpci_bridge(struct pci_dev *dev) -+{ -+ if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0) -+ return; ++/* PCIE protocol PHY diagnostic registers */ ++#define PCIE_PLP_MODEREG 0x200 /* Mode */ ++#define PCIE_PLP_STATUSREG 0x204 /* Status */ ++#define PCIE_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define PCIE_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define PCIE_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define PCIE_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define PCIE_PLP_ATTNREG 0x218 /* Attention */ ++#define PCIE_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define PCIE_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define PCIE_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define PCIE_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define PCIE_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define PCIE_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define PCIE_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define PCIE_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define PCIE_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ + -+ printk("PCI: Fixing up bridge\n"); ++/* PCIE protocol DLLP diagnostic registers */ ++#define PCIE_DLLP_LCREG 0x100 /* Link Control */ ++#define PCIE_DLLP_LSREG 0x104 /* Link Status */ ++#define PCIE_DLLP_LAREG 0x108 /* Link Attention */ ++#define PCIE_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define PCIE_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define PCIE_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define PCIE_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define PCIE_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define PCIE_DLLP_LRREG 0x120 /* Link Replay */ ++#define PCIE_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define PCIE_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define PCIE_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define PCIE_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define PCIE_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define PCIE_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define PCIE_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define PCIE_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define PCIE_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define PCIE_DLLP_TESTREG 0x14C /* Test */ ++#define PCIE_DLLP_PKTBIST 0x150 /* Packet BIST */ + -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ pcibios_enable_resources(dev); ++/* PCIE protocol TLP diagnostic registers */ ++#define PCIE_TLP_CONFIGREG 0x000 /* Configuration */ ++#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */ ++#define PCIE_TLP_WRDMAUPPER 0x010 /* Write DMA Upper Address */ ++#define PCIE_TLP_WRDMALOWER 0x014 /* Write DMA Lower Address */ ++#define PCIE_TLP_WRDMAREQ_LBEREG 0x018 /* Write DMA Len/ByteEn Req */ ++#define PCIE_TLP_RDDMAUPPER 0x01C /* Read DMA Upper Address */ ++#define PCIE_TLP_RDDMALOWER 0x020 /* Read DMA Lower Address */ ++#define PCIE_TLP_RDDMALENREG 0x024 /* Read DMA Len Req */ ++#define PCIE_TLP_MSIDMAUPPER 0x028 /* MSI DMA Upper Address */ ++#define PCIE_TLP_MSIDMALOWER 0x02C /* MSI DMA Lower Address */ ++#define PCIE_TLP_MSIDMALENREG 0x030 /* MSI DMA Len Req */ ++#define PCIE_TLP_SLVREQLENREG 0x034 /* Slave Request Len */ ++#define PCIE_TLP_FCINPUTSREQ 0x038 /* Flow Control Inputs */ ++#define PCIE_TLP_TXSMGRSREQ 0x03C /* Tx StateMachine and Gated Req */ ++#define PCIE_TLP_ADRACKCNTARBLEN 0x040 /* Address Ack XferCnt and ARB Len */ ++#define PCIE_TLP_DMACPLHDR0 0x044 /* DMA Completion Hdr 0 */ ++#define PCIE_TLP_DMACPLHDR1 0x048 /* DMA Completion Hdr 1 */ ++#define PCIE_TLP_DMACPLHDR2 0x04C /* DMA Completion Hdr 2 */ ++#define PCIE_TLP_DMACPLMISC0 0x050 /* DMA Completion Misc0 */ ++#define PCIE_TLP_DMACPLMISC1 0x054 /* DMA Completion Misc1 */ ++#define PCIE_TLP_DMACPLMISC2 0x058 /* DMA Completion Misc2 */ ++#define PCIE_TLP_SPTCTRLLEN 0x05C /* Split Controller Req len */ ++#define PCIE_TLP_SPTCTRLMSIC0 0x060 /* Split Controller Misc 0 */ ++#define PCIE_TLP_SPTCTRLMSIC1 0x064 /* Split Controller Misc 1 */ ++#define PCIE_TLP_BUSDEVFUNC 0x068 /* Bus/Device/Func */ ++#define PCIE_TLP_RESETCTR 0x06C /* Reset Counter */ ++#define PCIE_TLP_RTRYBUF 0x070 /* Retry Buffer value */ ++#define PCIE_TLP_TGTDEBUG1 0x074 /* Target Debug Reg1 */ ++#define PCIE_TLP_TGTDEBUG2 0x078 /* Target Debug Reg2 */ ++#define PCIE_TLP_TGTDEBUG3 0x07C /* Target Debug Reg3 */ ++#define PCIE_TLP_TGTDEBUG4 0x080 /* Target Debug Reg4 */ + -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3); -+} ++/* MDIO control */ ++#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define MDIOCTL_DIVISOR_VAL 0x2 ++#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ + -+struct pci_fixup pcibios_fixups[] = { -+ { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge }, -+ { 0 } -+}; ++/* MDIO Data */ ++#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define MDIODATA_TA 0x00020000 /* Turnaround */ ++#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define MDIODATA_REGADDR_MASK 0x003c0000 /* Regaddr Mask */ ++#define MDIODATA_DEVADDR_SHF 22 /* Physmedia devaddr shift */ ++#define MDIODATA_DEVADDR_MASK 0x0fc00000 /* Physmedia devaddr Mask */ ++#define MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define MDIODATA_START 0x40000000 /* start of Transaction */ + -+/* -+ * If we set up a device for bus mastering, we need to check the latency -+ * timer as certain crappy BIOSes forget to set it properly. -+ */ -+unsigned int pcibios_max_latency = 255; ++/* MDIO devices (SERDES modules) */ ++#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ + -+void pcibios_set_master(struct pci_dev *dev) -+{ -+ u8 lat; -+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); -+ if (lat < 16) -+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; -+ else if (lat > pcibios_max_latency) -+ lat = pcibios_max_latency; -+ else -+ return; -+ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat); -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -+} ++/* SERDES registers */ ++#define SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define SERDES_RX_CDR 6 /* CDR */ ++#define SERDES_RX_CDRBW 7 /* CDR BW */ + -diff -Nur linux-2.4.32/arch/mips/bcm947xx/prom.c linux-2.4.32-brcm/arch/mips/bcm947xx/prom.c ---- linux-2.4.32/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/prom.c 2005-12-16 23:39:10.944836750 +0100 -@@ -0,0 +1,41 @@ ++#endif /* _SBPCIE_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h +--- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,114 @@ +/* -+ * Early initialization code for BCM94710 boards ++ * HND SiliconBackplane PCI core hardware definitions. + * -+ * Copyright 2004, Broadcom Corporation ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -7719,7219 +7559,4441 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/prom.c linux-2.4.32-brcm/arch/mips/bcm + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id: prom.c,v 1.1 2005/03/16 13:49:59 wbx Exp $ ++ * $Id: sbpci.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $ + */ + -+#include -+#include -+#include -+#include -+#include ++#ifndef _sbpci_h_ ++#define _sbpci_h_ + -+void __init -+prom_init(int argc, const char **argv) -+{ -+ unsigned long mem; ++#ifndef _LANGUAGE_ASSEMBLY + -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM947XX; ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif + -+ /* Figure out memory size by finding aliases */ -+ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { -+ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == -+ *(unsigned long *)(prom_init)) -+ break; -+ } -+ add_memory_region(0, mem, BOOT_MEM_RAM); -+} ++/* Sonics side: PCI core and host control registers */ ++typedef struct sbpciregs { ++ uint32 control; /* PCI control */ ++ uint32 PAD[3]; ++ uint32 arbcontrol; /* PCI arbiter control */ ++ uint32 PAD[3]; ++ uint32 intstatus; /* Interrupt status */ ++ uint32 intmask; /* Interrupt mask */ ++ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ ++ uint32 PAD[9]; ++ uint32 bcastaddr; /* Sonics broadcast address */ ++ uint32 bcastdata; /* Sonics broadcast data */ ++ uint32 PAD[2]; ++ uint32 gpioin; /* ro: gpio input (>=rev2) */ ++ uint32 gpioout; /* rw: gpio output (>=rev2) */ ++ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ ++ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ ++ uint32 PAD[36]; ++ uint32 sbtopci0; /* Sonics to PCI translation 0 */ ++ uint32 sbtopci1; /* Sonics to PCI translation 1 */ ++ uint32 sbtopci2; /* Sonics to PCI translation 2 */ ++ uint32 PAD[189]; ++ uint32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */ ++ uint16 sprom[36]; /* SPROM shadow Area */ ++ uint32 PAD[46]; ++} sbpciregs_t; + -+void __init -+prom_free_prom_memory(void) -+{ -+} -diff -Nur linux-2.4.32/arch/mips/bcm947xx/sbmips.c linux-2.4.32-brcm/arch/mips/bcm947xx/sbmips.c ---- linux-2.4.32/arch/mips/bcm947xx/sbmips.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/sbmips.c 2005-12-16 23:39:10.944836750 +0100 -@@ -0,0 +1,1038 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane MIPS core routines -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++#endif /* _LANGUAGE_ASSEMBLY */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/* PCI control */ ++#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ ++#define PCI_RST 0x02 /* Value driven out to pin */ ++#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ ++#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ + -+/* -+ * Returns TRUE if an external UART exists at the given base -+ * register. -+ */ -+static bool -+BCMINITFN(serial_exists)(uint8 *regs) -+{ -+ uint8 save_mcr, status1; ++/* PCI arbiter control */ ++#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ ++#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ ++/* ParkID - for PCI corerev >= 8 */ ++#define PCI_PARKID_MASK 0x1c /* Selects which agent is parked on an idle bus */ ++#define PCI_PARKID_SHIFT 2 ++#define PCI_PARKID_EXT0 0 /* External master 0 */ ++#define PCI_PARKID_EXT1 1 /* External master 1 */ ++#define PCI_PARKID_EXT2 2 /* External master 2 */ ++#define PCI_PARKID_INT 3 /* Internal master */ ++#define PCI_PARKID_LAST 4 /* Last active master */ ++ ++/* Interrupt status/mask */ ++#define PCI_INTA 0x01 /* PCI INTA# is asserted */ ++#define PCI_INTB 0x02 /* PCI INTB# is asserted */ ++#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ ++#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ ++#define PCI_PME 0x10 /* PCI PME# is asserted */ + -+ save_mcr = R_REG(®s[UART_MCR]); -+ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); -+ status1 = R_REG(®s[UART_MSR]) & 0xf0; -+ W_REG(®s[UART_MCR], save_mcr); ++/* (General) PCI/SB mailbox interrupts, two bits per pci function */ ++#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ ++#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ ++#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ ++#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ ++#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ ++#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ ++#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ ++#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ + -+ return (status1 == 0x90); -+} ++/* Sonics broadcast address */ ++#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ ++ ++/* Sonics to PCI translation types */ ++#define SBTOPCI0_MASK 0xfc000000 ++#define SBTOPCI1_MASK 0xfc000000 ++#define SBTOPCI2_MASK 0xc0000000 ++#define SBTOPCI_MEM 0 ++#define SBTOPCI_IO 1 ++#define SBTOPCI_CFG0 2 ++#define SBTOPCI_CFG1 3 ++#define SBTOPCI_PREF 0x4 /* prefetch enable */ ++#define SBTOPCI_BURST 0x8 /* burst enable */ ++#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */ ++#define SBTOPCI_RC_READ 0x00 /* memory read */ ++#define SBTOPCI_RC_READLINE 0x10 /* memory read line */ ++#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ ++ ++/* PCI core index in SROM shadow area */ ++#define SRSH_PI_OFFSET 0 /* first word */ ++#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ ++#define SRSH_PI_SHIFT 12 /* bit 15:12 */ + ++#endif /* _sbpci_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbpcmcia.h linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h +--- linux.old/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbpcmcia.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,147 @@ +/* -+ * Initializes UART access. The callback function will be called once -+ * per found UART. ++ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbpcmcia.h,v 1.1.1.9 2006/02/27 03:43:16 honor Exp $ + */ -+void -+BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) -+{ -+ void *regs; -+ ulong base; -+ uint irq; -+ int i, n; + -+ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { -+ extifregs_t *eir = (extifregs_t *) regs; -+ sbconfig_t *sb; ++#ifndef _SBPCMCIA_H ++#define _SBPCMCIA_H + -+ /* Determine external UART register base */ -+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); -+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); + -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); ++/* All the addresses that are offsets in attribute space are divided ++ * by two to account for the fact that odd bytes are invalid in ++ * attribute space and our read/write routines make the space appear ++ * as if they didn't exist. Still we want to show the original numbers ++ * as documented in the hnd_pcmcia core manual. ++ */ + -+ /* Disable GPIO interrupt initially */ -+ W_REG(&eir->gpiointpolarity, 0); -+ W_REG(&eir->gpiointmask, 0); ++/* PCMCIA Function Configuration Registers */ ++#define PCMCIA_FCR (0x700 / 2) + -+ /* Search for external UARTs */ -+ n = 2; -+ for (i = 0; i < 2; i++) { -+ regs = (void *) REG_MAP(base + (i * 8), 8); -+ if (BCMINIT(serial_exists)(regs)) { -+ /* Set GPIO 1 to be the external UART IRQ */ -+ W_REG(&eir->gpiointmask, 2); -+ if (add) -+ add(regs, irq, 13500000, 0); -+ } -+ } ++#define FCR0_OFF 0 ++#define FCR1_OFF (0x40 / 2) ++#define FCR2_OFF (0x80 / 2) ++#define FCR3_OFF (0xc0 / 2) + -+ /* Add internal UART if enabled */ -+ if (R_REG(&eir->corecontrol) & CC_UE) -+ if (add) -+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); -+ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { -+ chipcregs_t *cc = (chipcregs_t *) regs; -+ uint32 rev, cap, pll, baud_base, div; ++#define PCMCIA_FCR0 (0x700 / 2) ++#define PCMCIA_FCR1 (0x740 / 2) ++#define PCMCIA_FCR2 (0x780 / 2) ++#define PCMCIA_FCR3 (0x7c0 / 2) + -+ /* Determine core revision and capabilities */ -+ rev = sb_corerev(sbh); -+ cap = R_REG(&cc->capabilities); -+ pll = cap & CAP_PLL_MASK; ++/* Standard PCMCIA FCR registers */ + -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); ++#define PCMCIA_COR 0 + -+ if (pll == PLL_TYPE1) { -+ /* PLL clock */ -+ baud_base = sb_clock_rate(pll, -+ R_REG(&cc->clockcontrol_n), -+ R_REG(&cc->clockcontrol_m2)); -+ div = 1; -+ } else { -+ if (rev >= 11) { -+ /* Fixed ALP clock */ -+ baud_base = 20000000; -+ div = 1; -+ /* Set the override bit so we don't divide it */ -+ W_REG(&cc->corecontrol, CC_UARTCLKO); -+ } else if (rev >= 3) { -+ /* Internal backplane clock */ -+ baud_base = sb_clock(sbh); -+ div = 2; /* Minimum divisor */ -+ W_REG(&cc->clkdiv, -+ ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div)); -+ } else { -+ /* Fixed internal backplane clock */ -+ baud_base = 88000000; -+ div = 48; -+ } ++#define COR_RST 0x80 ++#define COR_LEV 0x40 ++#define COR_IRQEN 0x04 ++#define COR_BLREN 0x01 ++#define COR_FUNEN 0x01 + -+ /* Clock source depends on strapping if UartClkOverride is unset */ -+ if ((rev > 0) && -+ ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { -+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { -+ /* Internal divided backplane clock */ -+ baud_base /= div; -+ } else { -+ /* Assume external clock of 1.8432 MHz */ -+ baud_base = 1843200; -+ } -+ } -+ } + -+ /* Add internal UARTs */ -+ n = cap & CAP_UARTS_MASK; -+ for (i = 0; i < n; i++) { -+ /* Register offset changed after revision 0 */ -+ if (rev) -+ regs = (void *)((ulong) &cc->uart0data + (i * 256)); -+ else -+ regs = (void *)((ulong) &cc->uart0data + (i * 8)); ++#define PCICIA_FCSR (2 / 2) ++#define PCICIA_PRR (4 / 2) ++#define PCICIA_SCR (6 / 2) ++#define PCICIA_ESR (8 / 2) + -+ if (add) -+ add(regs, irq, baud_base, 0); -+ } -+ } -+} + -+/* -+ * Initialize jtag master and return handle for -+ * jtag_rwreg. Returns NULL on failure. -+ */ -+void * -+sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap) -+{ -+ void *regs; ++#define PCM_MEMOFF 0x0000 ++#define F0_MEMOFF 0x1000 ++#define F1_MEMOFF 0x2000 ++#define F2_MEMOFF 0x3000 ++#define F3_MEMOFF 0x4000 + -+ if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) { -+ chipcregs_t *cc = (chipcregs_t *) regs; -+ uint32 tmp; ++/* Memory base in the function fcr's */ ++#define MEM_ADDR0 (0x728 / 2) ++#define MEM_ADDR1 (0x72a / 2) ++#define MEM_ADDR2 (0x72c / 2) + -+ /* -+ * Determine jtagm availability from -+ * core revision and capabilities. -+ */ -+ tmp = sb_corerev(sbh); -+ /* -+ * Corerev 10 has jtagm, but the only chip -+ * with it does not have a mips, and -+ * the layout of the jtagcmd register is -+ * different. We'll only accept >= 11. -+ */ -+ if (tmp < 11) -+ return (NULL); -+ -+ tmp = R_REG(&cc->capabilities); -+ if ((tmp & CAP_JTAGP) == 0) -+ return (NULL); -+ -+ /* Set clock divider if requested */ -+ if (clkd != 0) { -+ tmp = R_REG(&cc->clkdiv); -+ tmp = (tmp & ~CLKD_JTAG) | -+ ((clkd << CLKD_JTAG_SHIFT) & CLKD_JTAG); -+ W_REG(&cc->clkdiv, tmp); -+ } ++/* PCMCIA base plus Srom access in fcr0: */ ++#define PCMCIA_ADDR0 (0x072e / 2) ++#define PCMCIA_ADDR1 (0x0730 / 2) ++#define PCMCIA_ADDR2 (0x0732 / 2) + -+ /* Enable jtagm */ -+ tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0); -+ W_REG(&cc->jtagctrl, tmp); -+ } ++#define MEM_SEG (0x0734 / 2) ++#define SROM_CS (0x0736 / 2) ++#define SROM_DATAL (0x0738 / 2) ++#define SROM_DATAH (0x073a / 2) ++#define SROM_ADDRL (0x073c / 2) ++#define SROM_ADDRH (0x073e / 2) + -+ return (regs); -+} ++/* Values for srom_cs: */ ++#define SROM_IDLE 0 ++#define SROM_WRITE 1 ++#define SROM_READ 2 ++#define SROM_WEN 4 ++#define SROM_WDS 7 ++#define SROM_DONE 8 + -+void -+sb_jtagm_disable(void *h) -+{ -+ chipcregs_t *cc = (chipcregs_t *)h; ++/* CIS stuff */ + -+ W_REG(&cc->jtagctrl, R_REG(&cc->jtagctrl) & ~JCTRL_EN); -+} ++/* The CIS stops where the FCRs start */ ++#define CIS_SIZE PCMCIA_FCR + -+/* -+ * Read/write a jtag register. Assumes a target with -+ * 8 bit IR and 32 bit DR. -+ */ -+#define IRWIDTH 8 -+#define DRWIDTH 32 -+uint32 -+jtag_rwreg(void *h, uint32 ir, uint32 dr) -+{ -+ chipcregs_t *cc = (chipcregs_t *) h; -+ uint32 tmp; -+ -+ W_REG(&cc->jtagir, ir); -+ W_REG(&cc->jtagdr, dr); -+ tmp = JCMD_START | JCMD_ACC_IRDR | -+ ((IRWIDTH - 1) << JCMD_IRW_SHIFT) | -+ (DRWIDTH - 1); -+ W_REG(&cc->jtagcmd, tmp); -+ while (((tmp = R_REG(&cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) { -+ /* OSL_DELAY(1); */ -+ } ++/* Standard tuples we know about */ + -+ tmp = R_REG(&cc->jtagdr); -+ return (tmp); -+} ++#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ ++#define CISTPL_FUNCE 0x22 /* Function extensions */ ++#define CISTPL_CFTABLE 0x1b /* Config table entry */ + -+/* Returns the SB interrupt flag of the current core. */ -+uint32 -+sb_flag(sb_t *sbh) -+{ -+ void *regs; -+ sbconfig_t *sb; ++/* Function extensions for LANs */ + -+ regs = sb_coreregs(sbh); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++#define LAN_TECH 1 /* Technology type */ ++#define LAN_SPEED 2 /* Raw bit rate */ ++#define LAN_MEDIA 3 /* Transmission media */ ++#define LAN_NID 4 /* Node identification (aka MAC addr) */ ++#define LAN_CONN 5 /* Connector standard */ + -+ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK); -+} + -+static const uint32 sbips_int_mask[] = { -+ 0, -+ SBIPS_INT1_MASK, -+ SBIPS_INT2_MASK, -+ SBIPS_INT3_MASK, -+ SBIPS_INT4_MASK -+}; -+ -+static const uint32 sbips_int_shift[] = { -+ 0, -+ 0, -+ SBIPS_INT2_SHIFT, -+ SBIPS_INT3_SHIFT, -+ SBIPS_INT4_SHIFT -+}; ++/* CFTable */ ++#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ ++#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ ++#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ + -+/* -+ * Returns the MIPS IRQ assignment of the current core. If unassigned, -+ * 0 is returned. ++/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll ++ * take one for HNBU, and use "extensions" (a la FUNCE) within it. + */ -+uint -+sb_irq(sb_t *sbh) -+{ -+ uint idx; -+ void *regs; -+ sbconfig_t *sb; -+ uint32 flag, sbipsflag; -+ uint irq = 0; + -+ flag = sb_flag(sbh); ++#define CISTPL_BRCM_HNBU 0x80 + -+ idx = sb_coreidx(sbh); ++/* Subtypes of BRCM_HNBU: */ + -+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || -+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */ ++#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */ ++#define HNBU_BOARDREV 0x02 /* One byte board revision */ ++#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1) ++ * or 9 (sromrev > 1) bytes ++ */ ++#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */ ++#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */ ++#define HNBU_AA 0x06 /* Antennas available */ ++#define HNBU_AG 0x07 /* Antenna gain */ ++#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */ ++#define HNBU_LEDS 0x09 /* LED set */ ++#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl) ++ * in rev 2 ++ */ ++#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */ ++#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */ ++#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */ + -+ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ -+ sbipsflag = R_REG(&sb->sbipsflag); -+ for (irq = 1; irq <= 4; irq++) { -+ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) -+ break; -+ } -+ if (irq == 5) -+ irq = 0; -+ } + -+ sb_setcoreidx(sbh, idx); ++/* sbtmstatelow */ ++#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */ ++#define SBTML_INT_EN 0x20000 /* enable sb interrupt */ + -+ return irq; -+} ++/* sbtmstatehigh */ ++#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */ + -+/* Clears the specified MIPS IRQ. */ -+static void -+BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq) -+{ -+ void *regs; -+ sbconfig_t *sb; ++#endif /* _SBPCMCIA_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h +--- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,85 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbsdram.h,v 1.1.1.9 2006/03/02 13:03:52 honor Exp $ ++ */ + -+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(regs); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++#ifndef _SBSDRAM_H ++#define _SBSDRAM_H + -+ if (irq == 0) -+ W_REG(&sb->sbintvec, 0); -+ else -+ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); -+} ++#ifndef _LANGUAGE_ASSEMBLY + -+/* -+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS -+ * IRQ 0 may be assigned more than once. -+ */ -+static void -+BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit) -+{ -+ void *regs; -+ sbconfig_t *sb; -+ uint32 flag; ++/* Sonics side: SDRAM core registers */ ++typedef volatile struct sbsdramregs { ++ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ ++ uint32 config; /* Initializes external SDRAM mode register */ ++ uint32 refresh; /* Controls external SDRAM refresh rate */ ++ uint32 pad1; ++ uint32 pad2; ++} sbsdramregs_t; + -+ regs = sb_setcore(sbh, coreid, coreunit); -+ ASSERT(regs); -+ flag = sb_flag(sbh); ++/* SDRAM simulation */ ++#ifdef RAMSZ ++#define SDRAMSZ RAMSZ ++#else ++#define SDRAMSZ (4 * 1024 * 1024) ++#endif + -+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(regs); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++extern uchar sdrambuf[SDRAMSZ]; + -+ if (irq == 0) -+ OR_REG(&sb->sbintvec, 1 << flag); -+ else { -+ flag <<= sbips_int_shift[irq]; -+ ASSERT(!(flag & ~sbips_int_mask[irq])); -+ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; -+ W_REG(&sb->sbipsflag, flag); -+ } -+} ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++/* SDRAM initialization control (initcontrol) register bits */ ++#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ ++#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ ++#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ ++#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ ++#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ ++#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ ++#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ ++#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ ++#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ ++#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ ++#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ ++#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ ++#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ ++ ++/* SDRAM configuration (config) register bits */ ++#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ ++#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ ++#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ ++#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ ++#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ ++#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ ++ ++/* SDRAM refresh control (refresh) register bits */ ++#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ ++#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ ++ ++/* SDRAM Core default Init values (OCP ID 0x803) */ ++#define SDRAM_INIT MEM4MX16X2 ++#define SDRAM_CONFIG SDRAM_BURSTFULL ++#define SDRAM_REFRESH SDRAM_REF(0x40) ++ ++#define MEM1MX16 0x009 /* 2 MB */ ++#define MEM1MX16X2 0x409 /* 4 MB */ ++#define MEM2MX8X2 0x809 /* 4 MB */ ++#define MEM2MX8X4 0xc09 /* 8 MB */ ++#define MEM2MX32 0x439 /* 8 MB */ ++#define MEM4MX16 0x019 /* 8 MB */ ++#define MEM4MX16X2 0x419 /* 16 MB */ ++#define MEM8MX8X2 0x819 /* 16 MB */ ++#define MEM8MX16 0x829 /* 16 MB */ ++#define MEM4MX32 0x429 /* 16 MB */ ++#define MEM8MX8X4 0xc19 /* 32 MB */ ++#define MEM8MX16X2 0xc29 /* 32 MB */ + ++#endif /* _SBSDRAM_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbsocram.h linux.dev/arch/mips/bcm947xx/include/sbsocram.h +--- linux.old/arch/mips/bcm947xx/include/sbsocram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbsocram.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,64 @@ +/* -+ * Initializes clocks and interrupts. SB and NVRAM access must be -+ * initialized prior to calling. ++ * BCM47XX Sonics SiliconBackplane embedded ram core ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbsocram.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $ + */ -+void -+BCMINITFN(sb_mips_init)(sb_t *sbh) -+{ -+ ulong hz, ns, tmp; -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ char *value; -+ uint irq; + -+ /* Figure out current SB clock speed */ -+ if ((hz = sb_clock(sbh)) == 0) -+ hz = 100000000; -+ ns = 1000000000 / hz; ++#ifndef _SBSOCRAM_H ++#define _SBSOCRAM_H + -+ /* Setup external interface timing */ -+ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { -+ /* Initialize extif so we can get to the LEDs and external UART */ -+ W_REG(&eir->prog_config, CF_EN); ++#define SR_COREINFO 0x00 ++#define SR_BWALLOC 0x04 ++#define SR_BISTSTAT 0x0c ++#define SR_BANKINDEX 0x10 ++#define SR_BANKSTBYCTL 0x14 + -+ /* Set timing for the flash */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ -+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ + -+ /* Set programmable interface timing for external uart */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ -+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ -+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ -+ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { -+ /* Set timing for the flash */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ -+ tmp |= CEIL(120, ns); /* W0 = 120nS */ -+ -+ // Added by Chen-I for 5365 -+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) -+ { -+ W_REG(&cc->flash_waitcount, tmp); -+ W_REG(&cc->pcmcia_memwait, tmp); -+ } -+ else -+ { -+ if (sb_corerev(sbh) < 9) -+ W_REG(&cc->flash_waitcount, tmp); ++#ifndef _LANGUAGE_ASSEMBLY + -+ if ((sb_corerev(sbh) < 9) || -+ ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) { -+ W_REG(&cc->pcmcia_memwait, tmp); -+ } -+ } -+ } ++/* Memcsocram core registers */ ++typedef volatile struct sbsocramregs { ++ uint32 coreinfo; ++ uint32 bwalloc; ++ uint32 PAD; ++ uint32 biststat; ++ uint32 bankidx; ++ uint32 standbyctrl; ++} sbsocramregs_t; + -+ /* Chip specific initialization */ -+ switch (BCMINIT(sb_chip)(sbh)) { -+ case BCM4710_DEVICE_ID: -+ /* Clear interrupt map */ -+ for (irq = 0; irq <= 4; irq++) -+ BCMINIT(sb_clearirq)(sbh, irq); -+ BCMINIT(sb_setirq)(sbh, 0, SB_CODEC, 0); -+ BCMINIT(sb_setirq)(sbh, 0, SB_EXTIF, 0); -+ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 1); -+ BCMINIT(sb_setirq)(sbh, 3, SB_ILINE20, 0); -+ BCMINIT(sb_setirq)(sbh, 4, SB_PCI, 0); -+ ASSERT(eir); -+ value = BCMINIT(nvram_get)("et0phyaddr"); -+ if (value && !strcmp(value, "31")) { -+ /* Enable internal UART */ -+ W_REG(&eir->corecontrol, CC_UE); -+ /* Give USB its own interrupt */ -+ BCMINIT(sb_setirq)(sbh, 1, SB_USB, 0); -+ } else { -+ /* Disable internal UART */ -+ W_REG(&eir->corecontrol, 0); -+ /* Give Ethernet its own interrupt */ -+ BCMINIT(sb_setirq)(sbh, 1, SB_ENET, 0); -+ BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0); -+ } -+ break; -+ case BCM5350_DEVICE_ID: -+ /* Clear interrupt map */ -+ for (irq = 0; irq <= 4; irq++) -+ BCMINIT(sb_clearirq)(sbh, irq); -+ BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0); -+ BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0); -+ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0); -+ BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0); -+ BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0); -+ break; -+ } -+} ++#endif + -+uint32 -+BCMINITFN(sb_mips_clock)(sb_t *sbh) -+{ -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ uint32 n, m; -+ uint idx; -+ uint32 pll_type, rate = 0; ++/* Coreinfo register */ ++#define SRCI_PT_MASK 0x30000 ++#define SRCI_PT_SHIFT 16 + -+ /* get index of the current core */ -+ idx = sb_coreidx(sbh); -+ pll_type = PLL_TYPE1; ++/* In corerev 0, the memory size is 2 to the power of the ++ * base plus 16 plus to the contents of the memsize field plus 1. ++ */ ++#define SRCI_MS0_MASK 0xf ++#define SR_MS0_BASE 16 + -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ n = R_REG(&eir->clockcontrol_n); -+ m = R_REG(&eir->clockcontrol_sb); -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; -+ n = R_REG(&cc->clockcontrol_n); -+ if ((pll_type == PLL_TYPE2) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE6) || -+ (pll_type == PLL_TYPE7)) -+ m = R_REG(&cc->clockcontrol_mips); -+ else if (pll_type == PLL_TYPE5) { -+ rate = 200000000; -+ goto out; -+ } -+ else if (pll_type == PLL_TYPE3) { -+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) { /* 5365 is also type3 */ -+ rate = 200000000; -+ goto out; -+ } else -+ m = R_REG(&cc->clockcontrol_m2); /* 5350 uses m2 to control mips */ -+ } else -+ m = R_REG(&cc->clockcontrol_sb); -+ } else -+ goto out; -+ -+ // Added by Chen-I for 5365 -+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) -+ rate = 100000000; -+ else -+ /* calculate rate */ -+ rate = sb_clock_rate(pll_type, n, m); -+ -+ if (pll_type == PLL_TYPE6) -+ rate = SB2MIPS_T6(rate); ++/* ++ * In corerev 1 the bank size is 2 ^ the bank size field plus 14, ++ * the memory size is number of banks times bank size. ++ * The same applies to rom size. ++ */ ++#define SRCI_ROMNB_MASK 0xf000 ++#define SRCI_ROMNB_SHIFT 12 ++#define SRCI_ROMBSZ_MASK 0xf00 ++#define SRCI_ROMBSZ_SHIFT 8 ++#define SRCI_SRNB_MASK 0xf0 ++#define SRCI_SRNB_SHIFT 4 ++#define SRCI_SRBSZ_MASK 0xf ++#define SRCI_SRBSZ_SHIFT 0 ++ ++#define SR_BSZ_BASE 14 ++#endif /* _SBSOCRAM_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h +--- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,151 @@ ++/* ++ * Misc utility routines for accessing chip-specific features ++ * of Broadcom HNBU SiliconBackplane-based chips. ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sbutils.h,v 1.4 2006/04/08 07:12:42 honor Exp $ ++ */ + -+out: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); ++#ifndef _sbutils_h_ ++#define _sbutils_h_ + -+ return rate; -+} ++/* ++ * Datastructure to export all chip specific common variables ++ * public (read-only) portion of sbutils handle returned by ++ * sb_attach()/sb_kattach() ++*/ + -+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) ++struct sb_pub { + -+static void -+BCMINITFN(handler)(void) -+{ -+ /* Step 11 */ -+ __asm__ ( -+ ".set\tmips32\n\t" -+ "ssnop\n\t" -+ "ssnop\n\t" -+ /* Disable interrupts */ -+ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ -+ "mfc0 $15, $12\n\t" -+ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ -+ "li $14, -31746\n\t" -+ "and $15, $15, $14\n\t" -+ "mtc0 $15, $12\n\t" -+ "eret\n\t" -+ "nop\n\t" -+ "nop\n\t" -+ ".set\tmips0" -+ ); -+} ++ uint bustype; /* SB_BUS, PCI_BUS */ ++ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE */ ++ uint buscorerev; /* buscore rev */ ++ uint buscoreidx; /* buscore index */ ++ int ccrev; /* chip common core rev */ ++ uint boardtype; /* board type */ ++ uint boardvendor; /* board vendor */ ++ uint chip; /* chip number */ ++ uint chiprev; /* chip revision */ ++ uint chippkg; /* chip package option */ ++ uint sonicsrev; /* sonics backplane rev */ ++}; + -+/* The following MUST come right after handler() */ -+static void -+BCMINITFN(afterhandler)(void) -+{ -+} ++typedef const struct sb_pub sb_t; + +/* -+ * Set the MIPS, backplane and PCI clocks as closely as possible. ++ * Many of the routines below take an 'sbh' handle as their first arg. ++ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). ++ * At any one time, the sbh is logically focused on one particular sb core ++ * (the "current core"). ++ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. + */ -+bool -+BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) -+{ -+ extifregs_t *eir = NULL; -+ chipcregs_t *cc = NULL; -+ mipsregs_t *mipsr = NULL; -+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; -+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; -+ uint32 pll_type, sync_mode; -+ uint ic_size, ic_lsize; -+ uint idx, i; -+ typedef struct { -+ uint32 mipsclock; -+ uint16 n; -+ uint32 sb; -+ uint32 pci33; -+ uint32 pci25; -+ } n3m_table_t; -+ static n3m_table_t BCMINITDATA(type1_table)[] = { -+ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ -+ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ -+ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ -+ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */ -+ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */ -+ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */ -+ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */ -+ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */ -+ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */ -+ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */ -+ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */ -+ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */ -+ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */ -+ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */ -+ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */ -+ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */ -+ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */ -+ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */ -+ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */ -+ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */ -+ }; -+ typedef struct { -+ uint32 mipsclock; -+ uint16 n; -+ uint32 m2; /* that is the clockcontrol_m2 */ -+ } type3_table_t; -+ static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */ -+ { 150000000, 0x311, 0x4020005 }, -+ { 200000000, 0x311, 0x4020003 }, -+ }; -+ typedef struct { -+ uint32 mipsclock; -+ uint32 sbclock; -+ uint16 n; -+ uint32 sb; -+ uint32 pci33; -+ uint32 m2; -+ uint32 m3; -+ uint32 ratio_cfg; -+ uint32 ratio_parm; -+ } n4m_table_t; -+ -+ static n4m_table_t BCMINITDATA(type2_table)[] = { -+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9 }, -+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 }, -+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, -+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, -+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, -+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9 }, -+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, -+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, -+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, -+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, -+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, -+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, -+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, -+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 8, 0x012a00a9 }, -+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 } -+ }; -+ -+ static n4m_table_t BCMINITDATA(type4_table)[] = { -+ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, -+ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, -+ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, -+ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, -+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, 0x012a00a9 }, -+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, 0x254a14a9 }, -+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, -+ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, 0x02520129 }, -+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, -+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 }, -+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, -+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, -+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, 0x02520129 }, -+ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 } -+ }; + -+ static n4m_table_t BCMINITDATA(type7_table)[] = { -+ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, -+ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, -+ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, -+ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, -+ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, -+ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, -+ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, -+ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 }, -+ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 } -+ }; ++#define SB_OSH NULL /* Use for sb_kattach when no osh is available */ ++/* exported externs */ ++extern sb_t *sb_attach(uint pcidev, osl_t *osh, void *regs, uint bustype, ++ void *sdh, char **vars, uint *varsz); ++extern sb_t *sb_kattach(void); ++extern void sb_detach(sb_t *sbh); ++extern uint sb_chip(sb_t *sbh); ++extern uint sb_chiprev(sb_t *sbh); ++extern uint sb_chipcrev(sb_t *sbh); ++extern uint sb_chippkg(sb_t *sbh); ++extern uint sb_pcirev(sb_t *sbh); ++extern bool sb_war16165(sb_t *sbh); ++extern uint sb_pcmciarev(sb_t *sbh); ++extern uint sb_boardvendor(sb_t *sbh); ++extern uint sb_boardtype(sb_t *sbh); ++extern uint sb_bus(sb_t *sbh); ++extern uint sb_buscoretype(sb_t *sbh); ++extern uint sb_buscorerev(sb_t *sbh); ++extern uint sb_corelist(sb_t *sbh, uint coreid[]); ++extern uint sb_coreid(sb_t *sbh); ++extern uint sb_coreidx(sb_t *sbh); ++extern uint sb_coreunit(sb_t *sbh); ++extern uint sb_corevendor(sb_t *sbh); ++extern uint sb_corerev(sb_t *sbh); ++extern void *sb_osh(sb_t *sbh); ++extern void sb_setosh(sb_t *sbh, osl_t *osh); ++extern void *sb_coreregs(sb_t *sbh); ++extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val); ++extern bool sb_iscoreup(sb_t *sbh); ++extern void *sb_setcoreidx(sb_t *sbh, uint coreidx); ++extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit); ++extern int sb_corebist(sb_t *sbh); ++extern void sb_commit(sb_t *sbh); ++extern uint32 sb_base(uint32 admatch); ++extern uint32 sb_size(uint32 admatch); ++extern void sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits); ++extern void sb_core_tofixup(sb_t *sbh); ++extern void sb_core_disable(sb_t *sbh, uint32 bits); ++extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); ++extern uint32 sb_clock(sb_t *sbh); ++extern void sb_pci_setup(sb_t *sbh, uint coremask); ++extern void sb_pcmcia_init(sb_t *sbh); ++extern void sb_watchdog(sb_t *sbh, uint ticks); ++extern void *sb_gpiosetcore(sb_t *sbh); ++extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioin(sb_t *sbh); ++extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority); ++extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority); + -+ ulong start, end, dst; -+ bool ret = FALSE; ++extern void sb_clkctl_init(sb_t *sbh); ++extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh); ++extern bool sb_clkctl_clk(sb_t *sbh, uint mode); ++extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on); ++extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, ++ void *intrsenabled_fn, void *intr_arg); ++extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to); ++extern int sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif, ++ uint8 *pciheader); ++extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset); ++extern uint sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val); ++extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val); ++extern bool sb_backplane64(sb_t *sbh); ++extern void sb_btcgpiowar(sb_t *sbh); + -+ /* get index of the current core */ -+ idx = sb_coreidx(sbh); -+ clockcontrol_m2 = NULL; + -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ pll_type = PLL_TYPE1; -+ clockcontrol_n = &eir->clockcontrol_n; -+ clockcontrol_sb = &eir->clockcontrol_sb; -+ clockcontrol_pci = &eir->clockcontrol_pci; -+ clockcontrol_m2 = &cc->clockcontrol_m2; -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; -+ if (pll_type == PLL_TYPE6) { -+ clockcontrol_n = NULL; -+ clockcontrol_sb = NULL; -+ clockcontrol_pci = NULL; -+ } else { -+ clockcontrol_n = &cc->clockcontrol_n; -+ clockcontrol_sb = &cc->clockcontrol_sb; -+ clockcontrol_pci = &cc->clockcontrol_pci; -+ clockcontrol_m2 = &cc->clockcontrol_m2; -+ } -+ } else -+ goto done; + -+ if (pll_type == PLL_TYPE6) { -+ /* Silence compilers */ -+ orig_n = orig_sb = orig_pci = 0; -+ } else { -+ /* Store the current clock register values */ -+ orig_n = R_REG(clockcontrol_n); -+ orig_sb = R_REG(clockcontrol_sb); -+ orig_pci = R_REG(clockcontrol_pci); -+ } + -+ if (pll_type == PLL_TYPE1) { -+ /* Keep the current PCI clock if not specified */ -+ if (pciclock == 0) { -+ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci)); -+ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; -+ } ++extern bool sb_deviceremoved(sb_t *sbh); ++extern uint32 sb_socram_size(sb_t *sbh); + -+ /* Search for the closest MIPS clock less than or equal to a preferred value */ -+ for (i = 0; i < ARRAYSIZE(BCMINIT(type1_table)); i++) { -+ ASSERT(BCMINIT(type1_table)[i].mipsclock == -+ sb_clock_rate(pll_type, BCMINIT(type1_table)[i].n, BCMINIT(type1_table)[i].sb)); -+ if (BCMINIT(type1_table)[i].mipsclock > mipsclock) -+ break; -+ } -+ if (i == 0) { -+ ret = FALSE; -+ goto done; -+ } else { -+ ret = TRUE; -+ i--; -+ } -+ ASSERT(BCMINIT(type1_table)[i].mipsclock <= mipsclock); ++/* ++* Build device path. Path size must be >= SB_DEVPATH_BUFSZ. ++* The returned path is NULL terminated and has trailing '/'. ++* Return 0 on success, nonzero otherwise. ++*/ ++extern int sb_devpath(sb_t *sbh, char *path, int size); + -+ /* No PLL change */ -+ if ((orig_n == BCMINIT(type1_table)[i].n) && -+ (orig_sb == BCMINIT(type1_table)[i].sb) && -+ (orig_pci == BCMINIT(type1_table)[i].pci33)) -+ goto done; ++/* clkctl xtal what flags */ ++#define XTAL 0x1 /* primary crystal oscillator (2050) */ ++#define PLL 0x2 /* main chip pll */ + -+ /* Set the PLL controls */ -+ W_REG(clockcontrol_n, BCMINIT(type1_table)[i].n); -+ W_REG(clockcontrol_sb, BCMINIT(type1_table)[i].sb); -+ if (pciclock == 25000000) -+ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci25); -+ else -+ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci33); ++/* clkctl clk mode */ ++#define CLK_FAST 0 /* force fast (pll) clock */ ++#define CLK_DYNAMIC 2 /* enable dynamic clock control */ + -+ /* Reset */ -+ sb_watchdog(sbh, 1); + -+ while (1); -+ } else if ((pll_type == PLL_TYPE3) && -+ (BCMINIT(sb_chip)(sbh) != BCM5365_DEVICE_ID)) { -+ /* 5350 */ -+ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++/* GPIO usage priorities */ ++#define GPIO_DRV_PRIORITY 0 /* Driver */ ++#define GPIO_APP_PRIORITY 1 /* Application */ ++#define GPIO_HI_PRIORITY 2 /* Highest priority. Ignore GPIO reservation */ + -+ for (i = 0; i < ARRAYSIZE(type3_table); i++) { -+ if (type3_table[i].mipsclock > mipsclock) -+ break; -+ } -+ if (i == 0) { -+ ret = FALSE; -+ goto done; -+ } else { -+ ret = TRUE; -+ i--; -+ } -+ ASSERT(type3_table[i].mipsclock <= mipsclock); ++/* device path */ ++#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ + -+ /* No PLL change */ -+ orig_m2 = R_REG(&cc->clockcontrol_m2); -+ if ((orig_n == type3_table[i].n) && -+ (orig_m2 == type3_table[i].m2)) { -+ goto done; -+ } ++#endif /* _sbutils_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h +--- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,36 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: sflash.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ ++ */ + -+ /* Set the PLL controls */ -+ W_REG(clockcontrol_n, type3_table[i].n); -+ W_REG(clockcontrol_m2, type3_table[i].m2); ++#ifndef _sflash_h_ ++#define _sflash_h_ + -+ /* Reset */ -+ sb_watchdog(sbh, 1); -+ while (1); -+ } else if ((pll_type == PLL_TYPE2) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE6) || -+ (pll_type == PLL_TYPE7)) { -+ n4m_table_t *table = NULL, *te; -+ uint tabsz = 0; ++#include ++#include + -+ ASSERT(cc); ++struct sflash { ++ uint blocksize; /* Block size */ ++ uint numblocks; /* Number of blocks */ ++ uint32 type; /* Type */ ++ uint size; /* Total size in bytes */ ++}; + -+ orig_mips = R_REG(&cc->clockcontrol_mips); ++/* Utility functions */ ++extern int sflash_poll(chipcregs_t *cc, uint offset); ++extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); ++extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern int sflash_erase(chipcregs_t *cc, uint offset); ++extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern struct sflash * sflash_init(chipcregs_t *cc); + -+ if (pll_type == PLL_TYPE6) { -+ uint32 new_mips = 0; ++#endif /* _sflash_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h +--- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,33 @@ ++/* ++ * TRX image file header format. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ ret = TRUE; -+ if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) -+ new_mips = CC_T6_MMASK; ++#include + -+ if (orig_mips == new_mips) -+ goto done; ++#define TRX_MAGIC 0x30524448 /* "HDR0" */ ++#define TRX_VERSION 1 ++#define TRX_MAX_LEN 0x3A0000 ++#define TRX_NO_HEADER 1 /* Do not write TRX header */ ++#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ ++#define TRX_MAX_OFFSET 3 + -+ W_REG(&cc->clockcontrol_mips, new_mips); -+ goto end_fill; -+ } ++struct trx_header { ++ uint32 magic; /* "HDR0" */ ++ uint32 len; /* Length of file including header */ ++ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ ++ uint32 flag_version; /* 0:15 flags, 16:31 version */ ++ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ ++}; + -+ if (pll_type == PLL_TYPE2) { -+ table = BCMINIT(type2_table); -+ tabsz = ARRAYSIZE(BCMINIT(type2_table)); -+ } else if (pll_type == PLL_TYPE4) { -+ table = BCMINIT(type4_table); -+ tabsz = ARRAYSIZE(BCMINIT(type4_table)); -+ } else if (pll_type == PLL_TYPE7) { -+ table = BCMINIT(type7_table); -+ tabsz = ARRAYSIZE(BCMINIT(type7_table)); -+ } else -+ ASSERT("No table for plltype" == NULL); ++/* Compatibility */ ++typedef struct trx_header TRXHDR, *PTRXHDR; +diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h +--- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,361 @@ ++/* ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $ ++ */ + -+ /* Store the current clock register values */ -+ orig_m2 = R_REG(&cc->clockcontrol_m2); -+ orig_ratio_parm = 0; -+ orig_ratio_cfg = 0; ++#ifndef _TYPEDEFS_H_ ++#define _TYPEDEFS_H_ + -+ /* Look up current ratio */ -+ for (i = 0; i < tabsz; i++) { -+ if ((orig_n == table[i].n) && -+ (orig_sb == table[i].sb) && -+ (orig_pci == table[i].pci33) && -+ (orig_m2 == table[i].m2) && -+ (orig_mips == table[i].m3)) { -+ orig_ratio_parm = table[i].ratio_parm; -+ orig_ratio_cfg = table[i].ratio_cfg; -+ break; -+ } -+ } + -+ /* Search for the closest MIPS clock greater or equal to a preferred value */ -+ for (i = 0; i < tabsz; i++) { -+ ASSERT(table[i].mipsclock == -+ sb_clock_rate(pll_type, table[i].n, table[i].m3)); -+ if ((mipsclock <= table[i].mipsclock) && -+ ((sbclock == 0) || (sbclock <= table[i].sbclock))) -+ break; -+ } -+ if (i == tabsz) { -+ ret = FALSE; -+ goto done; -+ } else { -+ te = &table[i]; -+ ret = TRUE; -+ } ++/* Define 'SITE_TYPEDEFS' in the compile to include a site specific ++ * typedef file "site_typedefs.h". ++ * ++ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" ++ * section of this file makes inferences about the compile environment ++ * based on defined symbols and possibly compiler pragmas. ++ * ++ * Following these two sections is the "Default Typedefs" ++ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is ++ * defined. This section has a default set of typedefs and a few ++ * proprocessor symbols (TRUE, FALSE, NULL, ...). ++ */ + -+ /* No PLL change */ -+ if ((orig_n == te->n) && -+ (orig_sb == te->sb) && -+ (orig_pci == te->pci33) && -+ (orig_m2 == te->m2) && -+ (orig_mips == te->m3)) -+ goto done; ++#ifdef SITE_TYPEDEFS + -+ /* Set the PLL controls */ -+ W_REG(clockcontrol_n, te->n); -+ W_REG(clockcontrol_sb, te->sb); -+ W_REG(clockcontrol_pci, te->pci33); -+ W_REG(&cc->clockcontrol_m2, te->m2); -+ W_REG(&cc->clockcontrol_mips, te->m3); ++/* ++ * Site Specific Typedefs ++ * ++ */ + -+ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ -+ if ((pll_type == PLL_TYPE7) && -+ (te->sb != te->m2) && -+ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) -+ W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100); ++#include "site_typedefs.h" + -+ /* No ratio change */ -+ if (orig_ratio_parm == te->ratio_parm) -+ goto end_fill; ++#else + -+ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); ++/* ++ * Inferred Typedefs ++ * ++ */ + -+ /* Preload the code into the cache */ -+ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); -+ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); -+ while (start < end) { -+ cache_op(start, Fill_I); -+ start += ic_lsize; -+ } ++/* Infer the compile environment based on preprocessor symbols and pramas. ++ * Override type definitions as needed, and include configuration dependent ++ * header files to define types. ++ */ + -+ /* Copy the handler */ -+ start = (ulong) &BCMINIT(handler); -+ end = (ulong) &BCMINIT(afterhandler); -+ dst = KSEG1ADDR(0x180); -+ for (i = 0; i < (end - start); i += 4) -+ *((ulong *)(dst + i)) = *((ulong *)(start + i)); ++#ifdef __cplusplus + -+ /* Preload handler into the cache one line at a time */ -+ for (i = 0; i < (end - start); i += 4) -+ cache_op(dst + i, Fill_I); ++#define TYPEDEF_BOOL ++#ifndef FALSE ++#define FALSE false ++#endif ++#ifndef TRUE ++#define TRUE true ++#endif + -+ /* Clear BEV bit */ -+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); ++#else /* ! __cplusplus */ + -+ /* Enable interrupts */ -+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); ++#if defined(_WIN32) + -+ /* Enable MIPS timer interrupt */ -+ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(mipsr); -+ W_REG(&mipsr->intmask, 1); ++#define TYPEDEF_BOOL ++typedef unsigned char bool; /* consistent w/BOOL */ + -+ start_fill: -+ /* step 1, set clock ratios */ -+ MTC0(C0_BROADCOM, 3, te->ratio_parm); -+ MTC0(C0_BROADCOM, 1, te->ratio_cfg); ++#endif /* _WIN32 */ + -+ /* step 2: program timer intr */ -+ W_REG(&mipsr->timer, 100); -+ (void) R_REG(&mipsr->timer); ++#endif /* ! __cplusplus */ + -+ /* step 3, switch to async */ -+ sync_mode = MFC0(C0_BROADCOM, 4); -+ MTC0(C0_BROADCOM, 4, 1 << 22); ++/* use the Windows ULONG_PTR type when compiling for 64 bit */ ++#if defined(_WIN64) ++#include ++#define TYPEDEF_UINTPTR ++typedef ULONG_PTR uintptr; ++#endif + -+ /* step 4, set cfg active */ -+ MTC0(C0_BROADCOM, 2, 0x9); + ++#if defined(_MINOSL_) ++#define _NEED_SIZE_T_ ++#endif + -+ /* steps 5 & 6 */ -+ __asm__ __volatile__ ( -+ ".set\tmips3\n\t" -+ "wait\n\t" -+ ".set\tmips0" -+ ); ++#if defined(_NEED_SIZE_T_) ++typedef long unsigned int size_t; ++#endif + -+ /* step 7, clear cfg_active */ -+ MTC0(C0_BROADCOM, 2, 0); ++#ifdef __DJGPP__ ++typedef long unsigned int size_t; ++#endif /* __DJGPP__ */ + -+ /* Additional Step: set back to orig sync mode */ -+ MTC0(C0_BROADCOM, 4, sync_mode); ++#ifdef _MSC_VER /* Microsoft C */ ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++typedef signed __int64 int64; ++typedef unsigned __int64 uint64; ++#endif + -+ /* step 8, fake soft reset */ -+ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4); ++#if defined(MACOSX) ++#define TYPEDEF_BOOL ++#endif + -+ end_fill: -+ /* step 9 set watchdog timer */ -+ sb_watchdog(sbh, 20); -+ (void) R_REG(&cc->chipid); -+ -+ /* step 11 */ -+ __asm__ __volatile__ ( -+ ".set\tmips3\n\t" -+ "sync\n\t" -+ "wait\n\t" -+ ".set\tmips0" -+ ); -+ while (1); -+ } ++#if defined(__NetBSD__) ++#define TYPEDEF_ULONG ++#endif + -+done: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); + -+ return ret; -+} ++#if defined(linux) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#define TYPEDEF_ULONG ++#endif + -+/* -+ * This also must be run from the cache on 47xx -+ * so there are no mips core BIU ops in progress -+ * when the PFC is enabled. -+ */ ++#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) && \ ++ !defined(_HNDRTE_) && !defined(_MINOSL_) && !defined(__DJGPP__) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#endif + -+static void -+BCMINITFN(_enable_pfc)(uint32 mode) -+{ -+ /* write range */ -+ *(volatile uint32 *)PFC_CR1 = 0xffff0000; + -+ /* enable */ -+ *(volatile uint32 *)PFC_CR0 = mode; -+} ++/* Do not support the (u)int64 types with strict ansi for GNU C */ ++#if defined(__GNUC__) && defined(__STRICT_ANSI__) ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++#endif + -+void -+BCMINITFN(enable_pfc)(uint32 mode) -+{ -+ ulong start, end; -+ int i; ++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode ++ * for singned or unsigned ++ */ ++#if defined(__ICL) + -+ /* If auto then choose the correct mode for this -+ platform, currently we only ever select one mode */ -+ if (mode == PFC_AUTO) -+ mode = PFC_INST; ++#define TYPEDEF_INT64 + -+ /* enable prefetch cache if available */ -+ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { -+ start = (ulong) &BCMINIT(_enable_pfc); -+ end = (ulong) &BCMINIT(enable_pfc); ++#if defined(__STDC__) ++#define TYPEDEF_UINT64 ++#endif + -+ /* Preload handler into the cache one line at a time */ -+ for (i = 0; i < (end - start); i += 4) -+ cache_op(start + i, Fill_I); ++#endif /* __ICL */ + -+ BCMINIT(_enable_pfc)(mode); -+ } -+} ++#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && \ ++ !defined(__DJGPP__) + -+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ -+uint32 -+BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh) -+{ -+ sbmemcregs_t *memc; -+ uint32 ret = 0; -+ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; -+ uint idx, rev; ++/* pick up ushort & uint from standard types.h */ ++#if defined(linux) && defined(__KERNEL__) + -+ idx = sb_coreidx(sbh); ++#include /* sys/types.h and linux/types.h are oil and water */ + -+ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); -+ if (memc == 0) -+ goto out; ++#else + -+ rev = sb_corerev(sbh); ++#include + -+ config = R_REG(&memc->config); -+ wr = R_REG(&memc->wrncdlcor); -+ rd = R_REG(&memc->rdncdlcor); -+ misc = R_REG(&memc->miscdlyctl); -+ dqsg = R_REG(&memc->dqsgatencdl); ++#endif + -+ rd &= MEMC_RDNCDLCOR_RD_MASK; -+ wr &= MEMC_WRNCDLCOR_WR_MASK; -+ dqsg &= MEMC_DQSGATENCDL_G_MASK; ++#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ && !__DJGPP__ */ + -+ if (config & MEMC_CONFIG_DDR) { -+ ret = (wr << 16) | (rd << 8) | dqsg; -+ } else { -+ if (rev > 0) -+ cd = rd; -+ else -+ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); -+ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; -+ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; -+ ret = (sm << 16) | (sd << 8) | cd; -+ } ++#if defined(MACOSX) + -+out: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); ++#ifdef __BIG_ENDIAN__ ++#define IL_BIGENDIAN ++#else ++#ifdef IL_BIGENDIAN ++#error "IL_BIGENDIAN was defined for a little-endian compile" ++#endif ++#endif /* __BIG_ENDIAN__ */ + -+ return ret; -+} ++#if !defined(__cplusplus) + -diff -Nur linux-2.4.32/arch/mips/bcm947xx/sbpci.c linux-2.4.32-brcm/arch/mips/bcm947xx/sbpci.c ---- linux-2.4.32/arch/mips/bcm947xx/sbpci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/sbpci.c 2005-12-16 23:39:10.948837000 +0100 -@@ -0,0 +1,588 @@ -+/* -+ * Low-Level PCI and SB support for BCM47xx -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++#if defined(__i386__) ++typedef unsigned char bool; ++#else ++typedef unsigned int bool; ++#endif ++#define TYPE_BOOL 1 ++enum { ++ false = 0, ++ true = 1 ++}; + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#if defined(KERNEL) ++#include ++#endif /* KERNEL */ + -+/* Can free sbpci_init() memory after boot */ -+#ifndef linux -+#define __init -+#endif ++#endif /* __cplusplus */ + -+/* Emulated configuration space */ -+static pci_config_regs sb_config_regs[SB_MAXCORES]; ++#endif /* MACOSX */ + -+/* Banned cores */ -+static uint16 pci_ban[32] = { 0 }; -+static uint pci_banned = 0; + -+/* CardBus mode */ -+static bool cardbus = FALSE; ++/* use the default typedefs in the next section of this file */ ++#define USE_TYPEDEF_DEFAULTS ++ ++#endif /* SITE_TYPEDEFS */ + -+/* Disable PCI host core */ -+static bool pci_disabled = FALSE; + +/* -+ * Functions for accessing external PCI configuration space ++ * Default Typedefs ++ * + */ + -+/* Assume one-hot slot wiring */ -+#define PCI_SLOT_MAX 16 ++#ifdef USE_TYPEDEF_DEFAULTS ++#undef USE_TYPEDEF_DEFAULTS + -+static uint32 -+config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off) -+{ -+ uint coreidx; -+ sbpciregs_t *regs; -+ uint32 addr = 0; ++#ifndef TYPEDEF_BOOL ++typedef /* @abstract@ */ unsigned char bool; ++#endif + -+ /* CardBusMode supports only one device */ -+ if (cardbus && dev > 1) -+ return 0; ++/* define uchar, ushort, uint, ulong */ + -+ coreidx = sb_coreidx(sbh); -+ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); ++#ifndef TYPEDEF_UCHAR ++typedef unsigned char uchar; ++#endif + -+ /* Type 0 transaction */ -+ if (bus == 1) { -+ /* Skip unwired slots */ -+ if (dev < PCI_SLOT_MAX) { -+ /* Slide the PCI window to the appropriate slot */ -+ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK)); -+ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) | -+ (func << 8) | (off & ~3); -+ } -+ } ++#ifndef TYPEDEF_USHORT ++typedef unsigned short ushort; ++#endif + -+ /* Type 1 transaction */ -+ else { -+ W_REG(®s->sbtopci1, SBTOPCI_CFG1); -+ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3); -+ } ++#ifndef TYPEDEF_UINT ++typedef unsigned int uint; ++#endif + -+ sb_setcoreidx(sbh, coreidx); ++#ifndef TYPEDEF_ULONG ++typedef unsigned long ulong; ++#endif + -+ return addr; -+} ++/* define [u]int8/16/32/64, uintptr */ + -+static int -+extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ uint32 addr, *reg = NULL, val; -+ int ret = 0; ++#ifndef TYPEDEF_UINT8 ++typedef unsigned char uint8; ++#endif + -+ if (pci_disabled || -+ !(addr = config_cmd(sbh, bus, dev, func, off)) || -+ !(reg = (uint32 *) REG_MAP(addr, len)) || -+ BUSPROBE(val, reg)) -+ val = 0xffffffff; ++#ifndef TYPEDEF_UINT16 ++typedef unsigned short uint16; ++#endif + -+ val >>= 8 * (off & 3); -+ if (len == 4) -+ *((uint32 *) buf) = val; -+ else if (len == 2) -+ *((uint16 *) buf) = (uint16) val; -+ else if (len == 1) -+ *((uint8 *) buf) = (uint8) val; -+ else -+ ret = -1; ++#ifndef TYPEDEF_UINT32 ++typedef unsigned int uint32; ++#endif + -+ if (reg) -+ REG_UNMAP(reg); ++#ifndef TYPEDEF_UINT64 ++typedef unsigned long long uint64; ++#endif + -+ return ret; -+} ++#ifndef TYPEDEF_UINTPTR ++typedef unsigned int uintptr; ++#endif + -+static int -+extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ uint32 addr, *reg = NULL, val; -+ int ret = 0; ++#ifndef TYPEDEF_INT8 ++typedef signed char int8; ++#endif + -+ if (pci_disabled || -+ !(addr = config_cmd(sbh, bus, dev, func, off)) || -+ !(reg = (uint32 *) REG_MAP(addr, len)) || -+ BUSPROBE(val, reg)) -+ goto done; ++#ifndef TYPEDEF_INT16 ++typedef signed short int16; ++#endif + -+ if (len == 4) -+ val = *((uint32 *) buf); -+ else if (len == 2) { -+ val &= ~(0xffff << (8 * (off & 3))); -+ val |= *((uint16 *) buf) << (8 * (off & 3)); -+ } else if (len == 1) { -+ val &= ~(0xff << (8 * (off & 3))); -+ val |= *((uint8 *) buf) << (8 * (off & 3)); -+ } else -+ ret = -1; ++#ifndef TYPEDEF_INT32 ++typedef signed int int32; ++#endif ++ ++#ifndef TYPEDEF_INT64 ++typedef signed long long int64; ++#endif + -+ W_REG(reg, val); ++/* define float32/64, float_t */ + -+ done: -+ if (reg) -+ REG_UNMAP(reg); ++#ifndef TYPEDEF_FLOAT32 ++typedef float float32; ++#endif + -+ return ret; -+} ++#ifndef TYPEDEF_FLOAT64 ++typedef double float64; ++#endif + +/* -+ * Functions for accessing translated SB configuration space ++ * abstracted floating point type allows for compile time selection of ++ * single or double precision arithmetic. Compiling with -DFLOAT32 ++ * selects single precision; the default is double precision. + */ + -+static int -+sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ pci_config_regs *cfg; ++#ifndef TYPEDEF_FLOAT_T + -+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) -+ return -1; -+ cfg = &sb_config_regs[dev]; ++#if defined(FLOAT32) ++typedef float32 float_t; ++#else /* default to double precision floating point */ ++typedef float64 float_t; ++#endif + -+ ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED((uintptr)buf, len)); ++#endif /* TYPEDEF_FLOAT_T */ + -+ if (len == 4) -+ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); -+ else if (len == 2) -+ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); -+ else if (len == 1) -+ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); -+ else -+ return -1; ++/* define macro values */ + -+ return 0; -+} ++#ifndef FALSE ++#define FALSE 0 ++#endif + -+static int -+sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ uint coreidx, n; -+ void *regs; -+ sbconfig_t *sb; -+ pci_config_regs *cfg; ++#ifndef TRUE ++#define TRUE 1 /* TRUE */ ++#endif + -+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) -+ return -1; -+ cfg = &sb_config_regs[dev]; ++#ifndef NULL ++#define NULL 0 ++#endif + -+ ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED((uintptr)buf, len)); ++#ifndef OFF ++#define OFF 0 ++#endif + -+ /* Emulate BAR sizing */ -+ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && -+ len == 4 && *((uint32 *) buf) == ~0) { -+ coreidx = sb_coreidx(sbh); -+ if ((regs = sb_setcoreidx(sbh, dev))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ /* Highest numbered address match register */ -+ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; -+ if (off == OFFSETOF(pci_config_regs, base[0])) -+ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) -+ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) -+ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) -+ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1); -+ } -+ sb_setcoreidx(sbh, coreidx); -+ return 0; -+ } ++#ifndef ON ++#define ON 1 /* ON = 1 */ ++#endif + -+ if (len == 4) -+ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); -+ else if (len == 2) -+ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); -+ else if (len == 1) -+ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); -+ else -+ return -1; ++#define AUTO (-1) /* Auto = -1 */ + -+ return 0; -+} ++/* define PTRSZ, INLINE */ + -+int -+sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ if (bus == 0) -+ return sb_read_config(sbh, bus, dev, func, off, buf, len); -+ else -+ return extpci_read_config(sbh, bus, dev, func, off, buf, len); -+} ++#ifndef PTRSZ ++#define PTRSZ sizeof(char*) ++#endif + -+int -+sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ if (bus == 0) -+ return sb_write_config(sbh, bus, dev, func, off, buf, len); -+ else -+ return extpci_write_config(sbh, bus, dev, func, off, buf, len); -+} ++#ifndef INLINE + -+void -+sbpci_ban(uint16 core) -+{ -+ if (pci_banned < ARRAYSIZE(pci_ban)) -+ pci_ban[pci_banned++] = core; -+} ++#ifdef _MSC_VER + -+static int -+sbpci_init_pci(sb_t *sbh) -+{ -+ uint chip, chiprev, chippkg, host; -+ uint32 boardflags; -+ sbpciregs_t *pci; -+ sbconfig_t *sb; -+ uint32 val; ++#define INLINE __inline + -+ chip = sb_chip(sbh); -+ chiprev = sb_chiprev(sbh); -+ chippkg = sb_chippkg(sbh); ++#elif __GNUC__ + -+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) { -+ printf("PCI: no core\n"); -+ pci_disabled = TRUE; -+ return -1; -+ } -+ sb_core_reset(sbh, 0); ++#define INLINE __inline__ + -+ boardflags = (uint32) getintvar(NULL, "boardflags"); ++#else + -+ if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) -+ pci_disabled = TRUE; ++#define INLINE + -+ /* -+ * The 200-pin BCM4712 package does not bond out PCI. Even when -+ * PCI is bonded out, some boards may leave the pins -+ * floating. -+ */ -+ if (((chip == BCM4712_DEVICE_ID) && -+ ((chippkg == BCM4712SMALL_PKG_ID) || -+ (chippkg == BCM4712MID_PKG_ID))) || -+ (boardflags & BFL_NOPCI)) -+ pci_disabled = TRUE; ++#endif /* _MSC_VER */ + -+ /* -+ * If the PCI core should not be touched (disabled, not bonded -+ * out, or pins floating), do not even attempt to access core -+ * registers. Otherwise, try to determine if it is in host -+ * mode. -+ */ -+ if (pci_disabled) -+ host = 0; -+ else -+ host = !BUSPROBE(val, &pci->control); ++#endif /* INLINE */ + -+ if (!host) { -+ /* Disable PCI interrupts in client mode */ -+ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); -+ W_REG(&sb->sbintvec, 0); ++#undef TYPEDEF_BOOL ++#undef TYPEDEF_UCHAR ++#undef TYPEDEF_USHORT ++#undef TYPEDEF_UINT ++#undef TYPEDEF_ULONG ++#undef TYPEDEF_UINT8 ++#undef TYPEDEF_UINT16 ++#undef TYPEDEF_UINT32 ++#undef TYPEDEF_UINT64 ++#undef TYPEDEF_UINTPTR ++#undef TYPEDEF_INT8 ++#undef TYPEDEF_INT16 ++#undef TYPEDEF_INT32 ++#undef TYPEDEF_INT64 ++#undef TYPEDEF_FLOAT32 ++#undef TYPEDEF_FLOAT64 ++#undef TYPEDEF_FLOAT_T + -+ /* Disable the PCI bridge in client mode */ -+ sbpci_ban(SB_PCI); -+ printf("PCI: Disabled\n"); -+ } else { -+ /* Reset the external PCI bus and enable the clock */ -+ W_REG(&pci->control, 0x5); /* enable the tristate drivers */ -+ W_REG(&pci->control, 0xd); /* enable the PCI clock */ -+ OSL_DELAY(150); /* delay > 100 us */ -+ W_REG(&pci->control, 0xf); /* deassert PCI reset */ -+ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ -+ OSL_DELAY(1); /* delay 1 us */ ++#endif /* USE_TYPEDEF_DEFAULTS */ + -+ /* Enable CardBusMode */ -+ cardbus = nvram_match("cardbus", "1"); -+ if (cardbus) { -+ printf("PCI: Enabling CardBus\n"); -+ /* GPIO 1 resets the CardBus device on bcm94710ap */ -+ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY); -+ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY); -+ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); -+ } ++/* ++ * Including the bcmdefs.h here, to make sure everyone including typedefs.h ++ * gets this automatically ++*/ ++#include "bcmdefs.h" + -+ /* 64 MB I/O access window */ -+ W_REG(&pci->sbtopci0, SBTOPCI_IO); -+ /* 64 MB configuration access window */ -+ W_REG(&pci->sbtopci1, SBTOPCI_CFG0); -+ /* 1 GB memory access window */ -+ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); ++#endif /* _TYPEDEFS_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile +--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/Makefile 2006-10-02 21:26:08.000000000 +0200 +@@ -0,0 +1,17 @@ ++# ++# Makefile for the BCM947xx specific kernel interface routines ++# under Linux. ++# + -+ /* Enable PCI bridge BAR0 prefetch and burst */ -+ val = 6; -+ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val)); ++EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -fno-delayed-branch + -+ /* Enable PCI interrupts */ -+ W_REG(&pci->intmask, PCI_INTA); -+ } -+ -+ return 0; -+} ++O_TARGET := bcm947xx.o + -+static int -+sbpci_init_cores(sb_t *sbh) -+{ -+ uint chip, chiprev, chippkg, coreidx, i; -+ sbconfig_t *sb; -+ pci_config_regs *cfg; -+ void *regs; -+ char varname[8]; -+ uint wlidx = 0; -+ uint16 vendor, core; -+ uint8 class, subclass, progif; -+ uint32 val; -+ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; -+ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; ++export-objs := export.o ++obj-y := prom.o setup.o time.o sbmips.o gpio.o ++obj-y += nvram.o nvram_linux.o sflash.o cfe_env.o ++obj-y += sbutils.o bcmutils.o bcmsrom.o hndchipc.o ++obj-$(CONFIG_PCI) += sbpci.o pcibios.o ++obj-y += export.o + -+ chip = sb_chip(sbh); -+ chiprev = sb_chiprev(sbh); -+ chippkg = sb_chippkg(sbh); -+ coreidx = sb_coreidx(sbh); ++include $(TOPDIR)/Rules.make +diff -urN linux.old/arch/mips/bcm947xx/nvram.c linux.dev/arch/mips/bcm947xx/nvram.c +--- linux.old/arch/mips/bcm947xx/nvram.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/nvram.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,315 @@ ++/* ++ * NVRAM variable manipulation (common) ++ * ++ * Copyright 2004, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ */ + -+ /* Scan the SB bus */ -+ bzero(sb_config_regs, sizeof(sb_config_regs)); -+ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) { -+ cfg->vendor = 0xffff; -+ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs))) -+ continue; -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++#include ++#include ++#include ++#include ++#include ++#include + -+ /* Read ID register and parse vendor and core */ -+ val = R_REG(&sb->sbidhigh); -+ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT; -+ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; -+ progif = 0; ++extern struct nvram_tuple * BCMINIT(_nvram_realloc)(struct nvram_tuple *t, const char *name, const char *value); ++extern void BCMINIT(_nvram_free)(struct nvram_tuple *t); ++extern int BCMINIT(_nvram_read)(void *buf); + -+ /* Check if this core is banned */ -+ for (i = 0; i < pci_banned; i++) -+ if (core == pci_ban[i]) -+ break; -+ if (i < pci_banned) -+ continue; ++char * BCMINIT(_nvram_get)(const char *name); ++int BCMINIT(_nvram_set)(const char *name, const char *value); ++int BCMINIT(_nvram_unset)(const char *name); ++int BCMINIT(_nvram_getall)(char *buf, int count); ++int BCMINIT(_nvram_commit)(struct nvram_header *header); ++int BCMINIT(_nvram_init)(void); ++void BCMINIT(_nvram_exit)(void); + -+ /* Known vendor translations */ -+ switch (vendor) { -+ case SB_VEND_BCM: -+ vendor = VENDOR_BROADCOM; -+ break; -+ } ++static struct nvram_tuple * BCMINITDATA(nvram_hash)[257]; ++static struct nvram_tuple * nvram_dead; + -+ /* Determine class based on known core codes */ -+ switch (core) { -+ case SB_ILINE20: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ core = BCM47XX_ILINE_ID; -+ break; -+ case SB_ILINE100: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ core = BCM4610_ILINE_ID; -+ break; -+ case SB_ENET: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ core = BCM47XX_ENET_ID; -+ break; -+ case SB_SDRAM: -+ case SB_MEMC: -+ class = PCI_CLASS_MEMORY; -+ subclass = PCI_MEMORY_RAM; -+ break; -+ case SB_PCI: -+ class = PCI_CLASS_BRIDGE; -+ subclass = PCI_BRIDGE_PCI; -+ break; -+ case SB_MIPS: -+ case SB_MIPS33: -+ class = PCI_CLASS_CPU; -+ subclass = PCI_CPU_MIPS; -+ break; -+ case SB_CODEC: -+ class = PCI_CLASS_COMM; -+ subclass = PCI_COMM_MODEM; -+ core = BCM47XX_V90_ID; -+ break; -+ case SB_USB: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = 0x10; /* OHCI */ -+ core = BCM47XX_USB_ID; -+ break; -+ case SB_USB11H: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = 0x10; /* OHCI */ -+ core = BCM47XX_USBH_ID; -+ break; -+ case SB_USB11D: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ core = BCM47XX_USBD_ID; -+ break; -+ case SB_IPSEC: -+ class = PCI_CLASS_CRYPT; -+ subclass = PCI_CRYPT_NETWORK; -+ core = BCM47XX_IPSEC_ID; -+ break; -+ case SB_ROBO: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_OTHER; -+ core = BCM47XX_ROBO_ID; -+ break; -+ case SB_EXTIF: -+ case SB_CC: -+ class = PCI_CLASS_MEMORY; -+ subclass = PCI_MEMORY_FLASH; -+ break; -+ case SB_D11: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_OTHER; -+ /* Let an nvram variable override this */ -+ sprintf(varname, "wl%did", wlidx); -+ wlidx++; -+ if ((core = getintvar(NULL, varname)) == 0) { -+ if (chip == BCM4712_DEVICE_ID) { -+ if (chippkg == BCM4712SMALL_PKG_ID) -+ core = BCM4306_D11G_ID; -+ else -+ core = BCM4306_D11DUAL_ID; -+ } else { -+ /* 4310 */ -+ core = BCM4310_D11B_ID; -+ } -+ } -+ break; ++/* Free all tuples. Should be locked. */ ++static void ++BCMINITFN(nvram_free)(void) ++{ ++ uint i; ++ struct nvram_tuple *t, *next; + -+ default: -+ class = subclass = progif = 0xff; -+ break; ++ /* Free hash table */ ++ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { ++ for (t = BCMINIT(nvram_hash)[i]; t; t = next) { ++ next = t->next; ++ BCMINIT(_nvram_free)(t); + } ++ BCMINIT(nvram_hash)[i] = NULL; ++ } + -+ /* Supported translations */ -+ cfg->vendor = htol16(vendor); -+ cfg->device = htol16(core); -+ cfg->rev_id = chiprev; -+ cfg->prog_if = progif; -+ cfg->sub_class = subclass; -+ cfg->base_class = class; -+ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); -+ cfg->base[1] = htol32(sb_base(R_REG(&sb->sbadmatch1))); -+ cfg->base[2] = htol32(sb_base(R_REG(&sb->sbadmatch2))); -+ cfg->base[3] = htol32(sb_base(R_REG(&sb->sbadmatch3))); -+ cfg->base[4] = 0; -+ cfg->base[5] = 0; -+ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) -+ cfg->header_type = PCI_HEADER_BRIDGE; -+ else -+ cfg->header_type = PCI_HEADER_NORMAL; -+ /* Save core interrupt flag */ -+ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK; -+ /* Default to MIPS shared interrupt 0 */ -+ cfg->int_line = 0; -+ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */ -+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || -+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ val = R_REG(&sb->sbipsflag); -+ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) { -+ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin) -+ break; -+ } -+ if (cfg->int_line > 4) -+ cfg->int_line = 0; -+ } -+ /* Emulated core */ -+ *((uint32 *) &cfg->sprom_control) = 0xffffffff; ++ /* Free dead table */ ++ for (t = nvram_dead; t; t = next) { ++ next = t->next; ++ BCMINIT(_nvram_free)(t); + } ++ nvram_dead = NULL; + -+ sb_setcoreidx(sbh, coreidx); -+ return 0; ++ /* Indicate to per-port code that all tuples have been freed */ ++ BCMINIT(_nvram_free)(NULL); +} + -+int __init -+sbpci_init(sb_t *sbh) ++/* String hash */ ++static INLINE uint ++hash(const char *s) +{ -+ sbpci_init_pci(sbh); -+ sbpci_init_cores(sbh); -+ return 0; -+} ++ uint hash = 0; + -+void -+sbpci_check(sb_t *sbh) -+{ -+ uint coreidx; -+ sbpciregs_t *pci; -+ uint32 sbtopci1; -+ uint32 buf[64], *ptr, i; -+ ulong pa; -+ volatile uint j; ++ while (*s) ++ hash = 31 * hash + *s++; + -+ coreidx = sb_coreidx(sbh); -+ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); -+ -+ /* Clear the test array */ -+ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL); -+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); -+ memset(ptr, 0, sizeof(buf)); -+ -+ /* Point PCI window 1 to memory */ -+ sbtopci1 = R_REG(&pci->sbtopci1); -+ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK)); -+ -+ /* Fill the test array via PCI window 1 */ -+ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf)); -+ for (i = 0; i < ARRAYSIZE(buf); i++) { -+ for (j = 0; j < 2; j++); -+ W_REG(&ptr[i], i); -+ } -+ REG_UNMAP(ptr); ++ return hash; ++} ++ ++/* (Re)initialize the hash table. Should be locked. */ ++static int ++BCMINITFN(nvram_rehash)(struct nvram_header *header) ++{ ++ char buf[] = "0xXXXXXXXX", *name, *value, *end, *eq; + -+ /* Restore PCI window 1 */ -+ W_REG(&pci->sbtopci1, sbtopci1); ++ /* (Re)initialize hash table */ ++ BCMINIT(nvram_free)(); + -+ /* Check the test array */ -+ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL); -+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); -+ for (i = 0; i < ARRAYSIZE(buf); i++) { -+ if (ptr[i] != i) ++ /* Parse and set "name=value\0 ... \0\0" */ ++ name = (char *) &header[1]; ++ end = (char *) header + NVRAM_SPACE - 2; ++ end[0] = end[1] = '\0'; ++ for (; *name; name = value + strlen(value) + 1) { ++ if (!(eq = strchr(name, '='))) + break; ++ *eq = '\0'; ++ value = eq + 1; ++ BCMINIT(_nvram_set)(name, value); ++ *eq = '='; + } + -+ /* Change the clock if the test fails */ -+ if (i < ARRAYSIZE(buf)) { -+ uint32 req, cur; -+ -+ cur = sb_clock(sbh); -+ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000); -+ for (req = 104000000; req < 176000000; req += 4000000) { -+ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000); -+ /* This will only reset if the clocks are valid and have changed */ -+ sb_mips_setclock(sbh, req, 0, 0); -+ } -+ /* Should not reach here */ -+ ASSERT(0); ++ /* Set special SDRAM parameters */ ++ if (!BCMINIT(_nvram_get)("sdram_init")) { ++ sprintf(buf, "0x%04X", (uint16)(header->crc_ver_init >> 16)); ++ BCMINIT(_nvram_set)("sdram_init", buf); ++ } ++ if (!BCMINIT(_nvram_get)("sdram_config")) { ++ sprintf(buf, "0x%04X", (uint16)(header->config_refresh & 0xffff)); ++ BCMINIT(_nvram_set)("sdram_config", buf); ++ } ++ if (!BCMINIT(_nvram_get)("sdram_refresh")) { ++ sprintf(buf, "0x%04X", (uint16)((header->config_refresh >> 16) & 0xffff)); ++ BCMINIT(_nvram_set)("sdram_refresh", buf); ++ } ++ if (!BCMINIT(_nvram_get)("sdram_ncdl")) { ++ sprintf(buf, "0x%08X", header->config_ncdl); ++ BCMINIT(_nvram_set)("sdram_ncdl", buf); + } + -+ sb_setcoreidx(sbh, coreidx); ++ return 0; +} + -diff -Nur linux-2.4.32/arch/mips/bcm947xx/setup.c linux-2.4.32-brcm/arch/mips/bcm947xx/setup.c ---- linux-2.4.32/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/setup.c 2005-12-20 00:29:40.187416500 +0100 -@@ -0,0 +1,234 @@ -+/* -+ * Generic setup routines for Broadcom MIPS boards -+ * -+ * Copyright (C) 2005 Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ */ ++/* Get the value of an NVRAM variable. Should be locked. */ ++char * ++BCMINITFN(_nvram_get)(const char *name) ++{ ++ uint i; ++ struct nvram_tuple *t; ++ char *value; + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ if (!name) ++ return NULL; + -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ /* Hash the name */ ++ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); + -+/* Global SB handle */ -+sb_t *bcm947xx_sbh = NULL; -+spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED; ++ /* Find the associated tuple in the hash table */ ++ for (t = BCMINIT(nvram_hash)[i]; t && strcmp(t->name, name); t = t->next); + -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock ++ value = t ? t->value : NULL; + -+extern void bcm947xx_time_init(void); -+extern void bcm947xx_timer_setup(struct irqaction *irq); ++ return value; ++} + -+#ifdef CONFIG_REMOTE_DEBUG -+extern void set_debug_traps(void); -+extern void rs_kgdb_hook(struct serial_state *); -+extern void breakpoint(void); -+#endif ++/* Get the value of an NVRAM variable. Should be locked. */ ++int ++BCMINITFN(_nvram_set)(const char *name, const char *value) ++{ ++ uint i; ++ struct nvram_tuple *t, *u, **prev; + -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+extern struct ide_ops std_ide_ops; -+#endif ++ /* Hash the name */ ++ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); + -+/* Kernel command line */ -+char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE; ++ /* Find the associated tuple in the hash table */ ++ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); + -+void -+bcm947xx_machine_restart(char *command) -+{ -+ printk("Please stand by while rebooting the system...\n"); ++ /* (Re)allocate tuple */ ++ if (!(u = BCMINIT(_nvram_realloc)(t, name, value))) ++ return -12; /* -ENOMEM */ + -+ /* Set the watchdog timer to reset immediately */ -+ __cli(); -+ sb_watchdog(sbh, 1); -+ while (1); -+} ++ /* Value reallocated */ ++ if (t && t == u) ++ return 0; + -+void -+bcm947xx_machine_halt(void) -+{ -+ printk("System halted\n"); ++ /* Move old tuple to the dead table */ ++ if (t) { ++ *prev = t->next; ++ t->next = nvram_dead; ++ nvram_dead = t; ++ } + -+ /* Disable interrupts and watchdog and spin forever */ -+ __cli(); -+ sb_watchdog(sbh, 0); -+ while (1); ++ /* Add new tuple to the hash table */ ++ u->next = BCMINIT(nvram_hash)[i]; ++ BCMINIT(nvram_hash)[i] = u; ++ ++ return 0; +} + -+#ifdef CONFIG_SERIAL ++/* Unset the value of an NVRAM variable. Should be locked. */ ++int ++BCMINITFN(_nvram_unset)(const char *name) ++{ ++ uint i; ++ struct nvram_tuple *t, **prev; + -+static int ser_line = 0; ++ if (!name) ++ return 0; + -+typedef struct { -+ void *regs; -+ uint irq; -+ uint baud_base; -+ uint reg_shift; -+} serial_port; ++ /* Hash the name */ ++ i = hash(name) % ARRAYSIZE(BCMINIT(nvram_hash)); + -+static serial_port ports[4]; -+static int num_ports = 0; ++ /* Find the associated tuple in the hash table */ ++ for (prev = &BCMINIT(nvram_hash)[i], t = *prev; t && strcmp(t->name, name); prev = &t->next, t = *prev); + -+static void -+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) -+{ -+ ports[num_ports].regs = regs; -+ ports[num_ports].irq = irq; -+ ports[num_ports].baud_base = baud_base; -+ ports[num_ports].reg_shift = reg_shift; -+ num_ports++; ++ /* Move it to the dead table */ ++ if (t) { ++ *prev = t->next; ++ t->next = nvram_dead; ++ nvram_dead = t; ++ } ++ ++ return 0; +} + -+static void -+do_serial_add(serial_port *port) ++/* Get all NVRAM variables. Should be locked. */ ++int ++BCMINITFN(_nvram_getall)(char *buf, int count) +{ -+ void *regs; -+ uint irq; -+ uint baud_base; -+ uint reg_shift; -+ struct serial_struct s; -+ -+ regs = port->regs; -+ irq = port->irq; -+ baud_base = port->baud_base; -+ reg_shift = port->reg_shift; ++ uint i; ++ struct nvram_tuple *t; ++ int len = 0; + -+ memset(&s, 0, sizeof(s)); ++ bzero(buf, count); + -+ s.line = ser_line++; -+ s.iomem_base = regs; -+ s.irq = irq + 2; -+ s.baud_base = baud_base / 16; -+ s.flags = ASYNC_BOOT_AUTOCONF; -+ s.io_type = SERIAL_IO_MEM; -+ s.iomem_reg_shift = reg_shift; ++ /* Write name=value\0 ... \0\0 */ ++ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { ++ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) { ++ if ((count - len) > (strlen(t->name) + 1 + strlen(t->value) + 1)) ++ len += sprintf(buf + len, "%s=%s", t->name, t->value) + 1; ++ else ++ break; ++ } ++ } + -+ if (early_serial_setup(&s) != 0) { -+ printk(KERN_ERR "Serial setup failed!\n"); -+ } ++ return 0; +} + -+#endif /* CONFIG_SERIAL */ -+ -+void __init -+brcm_setup(void) -+{ -+ char *s; ++/* Regenerate NVRAM. Should be locked. */ ++int ++BCMINITFN(_nvram_commit)(struct nvram_header *header) ++{ ++ char *init, *config, *refresh, *ncdl; ++ char *ptr, *end; + int i; -+ char *value; -+ -+ /* Get global SB handle */ -+ sbh = sb_kattach(); -+ -+ /* Initialize clocks and interrupts */ -+ sb_mips_init(sbh); ++ struct nvram_tuple *t; ++ struct nvram_header tmp; ++ uint8 crc; + -+ if (BCM330X(current_cpu_data.processor_id) && -+ (read_c0_diag() & BRCM_PFC_AVAIL)) { -+ /* -+ * Now that the sbh is inited set the proper PFC value -+ */ -+ printk("Setting the PFC to its default value\n"); -+ enable_pfc(PFC_AUTO); ++ /* Regenerate header */ ++ header->magic = NVRAM_MAGIC; ++ header->crc_ver_init = (NVRAM_VERSION << 8); ++ if (!(init = BCMINIT(_nvram_get)("sdram_init")) || ++ !(config = BCMINIT(_nvram_get)("sdram_config")) || ++ !(refresh = BCMINIT(_nvram_get)("sdram_refresh")) || ++ !(ncdl = BCMINIT(_nvram_get)("sdram_ncdl"))) { ++ header->crc_ver_init |= SDRAM_INIT << 16; ++ header->config_refresh = SDRAM_CONFIG; ++ header->config_refresh |= SDRAM_REFRESH << 16; ++ header->config_ncdl = 0; ++ } else { ++ header->crc_ver_init |= (bcm_strtoul(init, NULL, 0) & 0xffff) << 16; ++ header->config_refresh = bcm_strtoul(config, NULL, 0) & 0xffff; ++ header->config_refresh |= (bcm_strtoul(refresh, NULL, 0) & 0xffff) << 16; ++ header->config_ncdl = bcm_strtoul(ncdl, NULL, 0); + } + ++ /* Clear data area */ ++ ptr = (char *) header + sizeof(struct nvram_header); ++ bzero(ptr, NVRAM_SPACE - sizeof(struct nvram_header)); + -+#ifdef CONFIG_SERIAL -+ sb_serial_init(sbh, serial_add); ++ /* Leave space for a double NUL at the end */ ++ end = (char *) header + NVRAM_SPACE - 2; + -+ /* reverse serial ports if nvram variable starts with console=ttyS1 */ -+ /* Initialize UARTs */ -+ s = nvram_get("kernel_args"); -+ if (!s) s = ""; -+ if (!strncmp(s, "console=ttyS1", 13)) { -+ for (i = num_ports; i; i--) -+ do_serial_add(&ports[i - 1]); -+ } else { -+ for (i = 0; i < num_ports; i++) -+ do_serial_add(&ports[i]); ++ /* Write out all tuples */ ++ for (i = 0; i < ARRAYSIZE(BCMINIT(nvram_hash)); i++) { ++ for (t = BCMINIT(nvram_hash)[i]; t; t = t->next) { ++ if ((ptr + strlen(t->name) + 1 + strlen(t->value) + 1) > end) ++ break; ++ ptr += sprintf(ptr, "%s=%s", t->name, t->value) + 1; ++ } + } -+#endif + -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+ ide_ops = &std_ide_ops; -+#endif ++ /* End with a double NUL */ ++ ptr += 2; + -+ /* Override default command line arguments */ -+ value = nvram_get("kernel_cmdline"); -+ if (value && strlen(value) && strncmp(value, "empty", 5)) -+ strncpy(arcs_cmdline, value, sizeof(arcs_cmdline)); ++ /* Set new length */ ++ header->len = ROUNDUP(ptr - (char *) header, 4); ++ ++ /* Little-endian CRC8 over the last 11 bytes of the header */ ++ tmp.crc_ver_init = htol32(header->crc_ver_init); ++ tmp.config_refresh = htol32(header->config_refresh); ++ tmp.config_ncdl = htol32(header->config_ncdl); ++ crc = hndcrc8((char *) &tmp + 9, sizeof(struct nvram_header) - 9, CRC8_INIT_VALUE); + ++ /* Continue CRC8 over data bytes */ ++ crc = hndcrc8((char *) &header[1], header->len - sizeof(struct nvram_header), crc); + -+ /* Generic setup */ -+ _machine_restart = bcm947xx_machine_restart; -+ _machine_halt = bcm947xx_machine_halt; -+ _machine_power_off = bcm947xx_machine_halt; ++ /* Set new CRC8 */ ++ header->crc_ver_init |= crc; + -+ board_time_init = bcm947xx_time_init; -+ board_timer_setup = bcm947xx_timer_setup; ++ /* Reinitialize hash table */ ++ return BCMINIT(nvram_rehash)(header); +} + -+const char * -+get_system_type(void) ++/* Initialize hash table. Should be locked. */ ++int ++BCMINITFN(_nvram_init)(void) +{ -+ static char s[32]; ++ struct nvram_header *header; ++ int ret; + -+ if (bcm947xx_sbh) { -+ sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh), -+ sb_chiprev(bcm947xx_sbh)); -+ return s; ++ if (!(header = (struct nvram_header *) kmalloc(NVRAM_SPACE, GFP_ATOMIC))) { ++ return -12; /* -ENOMEM */ + } -+ else -+ return "Broadcom BCM947XX"; ++ ++ if ((ret = BCMINIT(_nvram_read)(header)) == 0 && ++ header->magic == NVRAM_MAGIC) ++ BCMINIT(nvram_rehash)(header); ++ ++ kfree(header); ++ return ret; +} + -+void __init -+bus_error_init(void) ++/* Free hash table. Should be locked. */ ++void ++BCMINITFN(_nvram_exit)(void) +{ ++ BCMINIT(nvram_free)(); +} -+ -+EXPORT_SYMBOL(bcm947xx_sbh); -diff -Nur linux-2.4.32/arch/mips/bcm947xx/sflash.c linux-2.4.32-brcm/arch/mips/bcm947xx/sflash.c ---- linux-2.4.32/arch/mips/bcm947xx/sflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/sflash.c 2005-12-16 23:39:10.948837000 +0100 -@@ -0,0 +1,418 @@ +diff -urN linux.old/arch/mips/bcm947xx/nvram_linux.c linux.dev/arch/mips/bcm947xx/nvram_linux.c +--- linux.old/arch/mips/bcm947xx/nvram_linux.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/nvram_linux.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,723 @@ +/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * NVRAM variable manipulation (Linux kernel half) + * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id$ ++ * $Id: nvram_linux.c,v 1.19 2006/04/08 07:12:42 honor Exp $ + */ + -+#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ +#include ++#include ++#include ++#include ++#include +#include +#include -+#include -+#include -+#include ++#include ++#include +#include + -+/* Private global state */ -+static struct sflash sflash; ++/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ ++static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); + -+/* Issue a serial flash command */ -+static INLINE void -+sflash_cmd(chipcregs_t *cc, uint opcode) -+{ -+ W_REG(&cc->flashcontrol, SFLASH_START | opcode); -+ while (R_REG(&cc->flashcontrol) & SFLASH_BUSY); -+} ++#ifdef MODULE + -+/* Initialize serial flash access */ -+struct sflash * -+sflash_init(chipcregs_t *cc) -+{ -+ uint32 id, id2; ++#define early_nvram_get(name) nvram_get(name) + -+ bzero(&sflash, sizeof(sflash)); ++#else /* !MODULE */ + -+ sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK; ++/* Global SB handle */ ++extern void *bcm947xx_sbh; ++extern spinlock_t bcm947xx_sbh_lock; + -+ switch (sflash.type) { -+ case SFLASH_ST: -+ /* Probe for ST chips */ -+ sflash_cmd(cc, SFLASH_ST_DP); -+ sflash_cmd(cc, SFLASH_ST_RES); -+ id = R_REG(&cc->flashdata); -+ switch (id) { -+ case 0x11: -+ /* ST M25P20 2 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 4; -+ break; -+ case 0x12: -+ /* ST M25P40 4 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 8; -+ break; -+ case 0x13: -+ /* ST M25P80 8 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 16; -+ break; -+ case 0x14: -+ /* ST M25P16 16 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 32; -+ break; -+ case 0x15: -+ /* ST M25P32 32 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 64; ++static int cfe_env; ++extern char *cfe_env_get(char *nv_buf, const char *name); ++ ++/* Convenience */ ++#define sbh bcm947xx_sbh ++#define sbh_lock bcm947xx_sbh_lock ++#define KB * 1024 ++#define MB * 1024 * 1024 ++ ++/* Probe for NVRAM header */ ++static void __init ++early_nvram_init(void) ++{ ++ struct nvram_header *header; ++ chipcregs_t *cc; ++ struct sflash *info = NULL; ++ int i; ++ uint32 base, off, lim; ++ u32 *src, *dst; ++ ++ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ base = KSEG1ADDR(SB_FLASH2); ++ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { ++ case PFLASH: ++ lim = SB_FLASH2_SZ; + break; -+ case 0xbf: -+ W_REG(&cc->flashaddress, 1); -+ sflash_cmd(cc, SFLASH_ST_RES); -+ id2 = R_REG(&cc->flashdata); -+ if (id2 == 0x44) { -+ /* SST M25VF80 4 Mbit Serial Flash */ -+ sflash.blocksize = 64 * 1024; -+ sflash.numblocks = 8; -+ } ++ ++ case SFLASH_ST: ++ case SFLASH_AT: ++ if ((info = sflash_init(cc)) == NULL) ++ return; ++ lim = info->size; + break; ++ ++ case FLASH_NONE: ++ default: ++ return; + } -+ break; ++ } else { ++ /* extif assumed, Stop at 4 MB */ ++ base = KSEG1ADDR(SB_FLASH1); ++ lim = SB_FLASH1_SZ; ++ } + -+ case SFLASH_AT: -+ /* Probe for Atmel chips */ -+ sflash_cmd(cc, SFLASH_AT_STATUS); -+ id = R_REG(&cc->flashdata) & 0x3c; -+ switch (id) { -+ case 0xc: -+ /* Atmel AT45DB011 1Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 512; -+ break; -+ case 0x14: -+ /* Atmel AT45DB021 2Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 1024; -+ break; -+ case 0x1c: -+ /* Atmel AT45DB041 4Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 2048; -+ break; -+ case 0x24: -+ /* Atmel AT45DB081 8Mbit Serial Flash */ -+ sflash.blocksize = 256; -+ sflash.numblocks = 4096; -+ break; -+ case 0x2c: -+ /* Atmel AT45DB161 16Mbit Serial Flash */ -+ sflash.blocksize = 512; -+ sflash.numblocks = 4096; -+ break; -+ case 0x34: -+ /* Atmel AT45DB321 32Mbit Serial Flash */ -+ sflash.blocksize = 512; -+ sflash.numblocks = 8192; -+ break; -+ case 0x3c: -+ /* Atmel AT45DB642 64Mbit Serial Flash */ -+ sflash.blocksize = 1024; -+ sflash.numblocks = 8192; -+ break; ++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ ++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); ++ dst = (u32 *) nvram_buf; ++ if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) { ++ printk("early_nvram_init: WGT634U NVRAM found.\n"); ++ ++ for (i = 0; i < 0x1ff0; i++) { ++ if (*src == 0xFFFFFFFF) ++ break; ++ *dst++ = *src++; + } -+ break; ++ cfe_env = 1; ++ return; + } + -+ sflash.size = sflash.blocksize * sflash.numblocks; -+ return sflash.size ? &sflash : NULL; ++ off = FLASH_MIN; ++ while (off <= lim) { ++ /* Windowed flash access */ ++ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ off <<= 1; ++ } ++ ++ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ ++ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ printk("early_nvram_init: NVRAM not found\n"); ++ return; ++ ++found: ++ src = (u32 *) header; ++ dst = (u32 *) nvram_buf; ++ for (i = 0; i < sizeof(struct nvram_header); i += 4) ++ *dst++ = *src++; ++ for (; i < header->len && i < NVRAM_SPACE; i += 4) ++ *dst++ = ltoh32(*src++); +} + -+/* Read len bytes starting at offset into buf. Returns number of bytes read. */ -+int -+sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) ++/* Early (before mm or mtd) read-only access to NVRAM */ ++static char * __init ++early_nvram_get(const char *name) +{ -+ int cnt; -+ uint32 *from, *to; ++ char *var, *value, *end, *eq; + -+ if (!len) -+ return 0; ++ if (!name) ++ return NULL; + -+ if ((offset + len) > sflash.size) -+ return -22; ++ /* Too early? */ ++ if (sbh == NULL) ++ return NULL; + -+ if ((len >= 4) && (offset & 3)) -+ cnt = 4 - (offset & 3); -+ else if ((len >= 4) && ((uint32)buf & 3)) -+ cnt = 4 - ((uint32)buf & 3); -+ else -+ cnt = len; ++ if (!nvram_buf[0]) ++ early_nvram_init(); + -+ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset); -+ to = (uint32 *)buf; ++ if (cfe_env) ++ return cfe_env_get(nvram_buf, name); + -+ if (cnt < 4) { -+ bcopy(from, to, cnt); -+ return cnt; ++ /* Look for name=value and return value */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var = value + strlen(value) + 1) { ++ if (!(eq = strchr(var, '='))) ++ break; ++ value = eq + 1; ++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) ++ return value; + } + -+ while (cnt >= 4) { -+ *to++ = *from++; -+ cnt -= 4; ++ return NULL; ++} ++ ++static int __init ++early_nvram_getall(char *buf, int count) ++{ ++ char *var, *end; ++ int len = 0; ++ ++ /* Too early? */ ++ if (sbh == NULL) ++ return -1; ++ ++ if (!nvram_buf[0]) ++ early_nvram_init(); ++ ++ bzero(buf, count); ++ ++ /* Write name=value\0 ... \0\0 */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var += strlen(var) + 1) { ++ if ((count - len) <= (strlen(var) + 1)) ++ break; ++ len += sprintf(buf + len, "%s", var) + 1; + } + -+ return (len - cnt); ++ return 0; +} ++#endif /* !MODULE */ ++ ++extern char * _nvram_get(const char *name); ++extern int _nvram_set(const char *name, const char *value); ++extern int _nvram_unset(const char *name); ++extern int _nvram_getall(char *buf, int count); ++extern int _nvram_commit(struct nvram_header *header); ++extern int _nvram_init(void *sbh); ++extern void _nvram_exit(void); ++ ++/* Globals */ ++static spinlock_t nvram_lock = SPIN_LOCK_UNLOCKED; ++static struct semaphore nvram_sem; ++static unsigned long nvram_offset = 0; ++static int nvram_major = -1; ++static devfs_handle_t nvram_handle = NULL; ++static struct mtd_info *nvram_mtd = NULL; + -+/* Poll for command completion. Returns zero when complete. */ +int -+sflash_poll(chipcregs_t *cc, uint offset) ++_nvram_read(char *buf) +{ -+ if (offset >= sflash.size) -+ return -22; ++ struct nvram_header *header = (struct nvram_header *) buf; ++ size_t len; + -+ switch (sflash.type) { -+ case SFLASH_ST: -+ /* Check for ST Write In Progress bit */ -+ sflash_cmd(cc, SFLASH_ST_RDSR); -+ return R_REG(&cc->flashdata) & SFLASH_ST_WIP; -+ case SFLASH_AT: -+ /* Check for Atmel Ready bit */ -+ sflash_cmd(cc, SFLASH_AT_STATUS); -+ return !(R_REG(&cc->flashdata) & SFLASH_AT_READY); ++ if (!nvram_mtd || ++ MTD_READ(nvram_mtd, nvram_mtd->size - NVRAM_SPACE, NVRAM_SPACE, &len, buf) || ++ len != NVRAM_SPACE || ++ header->magic != NVRAM_MAGIC) { ++ /* Maybe we can recover some data from early initialization */ ++ memcpy(buf, nvram_buf, NVRAM_SPACE); + } + + return 0; +} + -+/* Write len bytes starting at offset into buf. Returns number of bytes -+ * written. Caller should poll for completion. -+ */ ++struct nvram_tuple * ++_nvram_realloc(struct nvram_tuple *t, const char *name, const char *value) ++{ ++ if ((nvram_offset + strlen(value) + 1) > NVRAM_SPACE) ++ return NULL; ++ ++ if (!t) { ++ if (!(t = kmalloc(sizeof(struct nvram_tuple) + strlen(name) + 1, GFP_ATOMIC))) ++ return NULL; ++ ++ /* Copy name */ ++ t->name = (char *) &t[1]; ++ strcpy(t->name, name); ++ ++ t->value = NULL; ++ } ++ ++ /* Copy value */ ++ if (!t->value || strcmp(t->value, value)) { ++ t->value = &nvram_buf[nvram_offset]; ++ strcpy(t->value, value); ++ nvram_offset += strlen(value) + 1; ++ } ++ ++ return t; ++} ++ ++void ++_nvram_free(struct nvram_tuple *t) ++{ ++ if (!t) ++ nvram_offset = 0; ++ else ++ kfree(t); ++} ++ +int -+sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++nvram_set(const char *name, const char *value) +{ -+ struct sflash *sfl; -+ int ret = 0; -+ bool is4712b0; -+ uint32 page, byte, mask; ++ unsigned long flags; ++ int ret; ++ struct nvram_header *header; + -+ if (!len) -+ return 0; ++ spin_lock_irqsave(&nvram_lock, flags); ++ if ((ret = _nvram_set(name, value))) { ++ /* Consolidate space and try again */ ++ if ((header = kmalloc(NVRAM_SPACE, GFP_ATOMIC))) { ++ if (_nvram_commit(header) == 0) ++ ret = _nvram_set(name, value); ++ kfree(header); ++ } ++ } ++ spin_unlock_irqrestore(&nvram_lock, flags); + -+ if ((offset + len) > sflash.size) -+ return -22; ++ return ret; ++} + -+ sfl = &sflash; -+ switch (sfl->type) { -+ case SFLASH_ST: -+ mask = R_REG(&cc->chipid); -+ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) && -+ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT))); -+ /* Enable writes */ -+ sflash_cmd(cc, SFLASH_ST_WREN); -+ if (is4712b0) { -+ mask = 1 << 14; -+ W_REG(&cc->flashaddress, offset); -+ W_REG(&cc->flashdata, *buf++); -+ /* Set chip select */ -+ OR_REG(&cc->gpioout, mask); -+ /* Issue a page program with the first byte */ -+ sflash_cmd(cc, SFLASH_ST_PP); -+ ret = 1; -+ offset++; -+ len--; -+ while (len > 0) { -+ if ((offset & 255) == 0) { -+ /* Page boundary, drop cs and return */ -+ AND_REG(&cc->gpioout, ~mask); -+ if (!sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -11; -+ } -+ return ret; -+ } else { -+ /* Write single byte */ -+ sflash_cmd(cc, *buf++); -+ } -+ ret++; -+ offset++; -+ len--; -+ } -+ /* All done, drop cs if needed */ -+ if ((offset & 255) != 1) { -+ /* Drop cs */ -+ AND_REG(&cc->gpioout, ~mask); -+ if (!sflash_poll(cc, offset)) { -+ /* Flash rejected command */ -+ return -12; -+ } -+ } -+ } else { -+ ret = 1; -+ W_REG(&cc->flashaddress, offset); -+ W_REG(&cc->flashdata, *buf); -+ /* Page program */ -+ sflash_cmd(cc, SFLASH_ST_PP); -+ } -+ break; -+ case SFLASH_AT: -+ mask = sfl->blocksize - 1; -+ page = (offset & ~mask) << 1; -+ byte = offset & mask; -+ /* Read main memory page into buffer 1 */ -+ if (byte || len < sfl->blocksize) { -+ W_REG(&cc->flashaddress, page); -+ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); -+ /* 250 us for AT45DB321B */ -+ SPINWAIT(sflash_poll(cc, offset), 1000); -+ ASSERT(!sflash_poll(cc, offset)); -+ } -+ /* Write into buffer 1 */ -+ for (ret = 0; ret < len && byte < sfl->blocksize; ret++) { -+ W_REG(&cc->flashaddress, byte++); -+ W_REG(&cc->flashdata, *buf++); -+ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); -+ } -+ /* Write buffer 1 into main memory page */ -+ W_REG(&cc->flashaddress, page); -+ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); -+ break; -+ } ++char * ++real_nvram_get(const char *name) ++{ ++ unsigned long flags; ++ char *value; + -+ return ret; ++ spin_lock_irqsave(&nvram_lock, flags); ++ value = _nvram_get(name); ++ spin_unlock_irqrestore(&nvram_lock, flags); ++ ++ return value; ++} ++ ++char * ++nvram_get(const char *name) ++{ ++ if (nvram_major >= 0) ++ return real_nvram_get(name); ++ else ++ return early_nvram_get(name); +} + -+/* Erase a region. Returns number of bytes scheduled for erasure. -+ * Caller should poll for completion. -+ */ +int -+sflash_erase(chipcregs_t *cc, uint offset) ++nvram_unset(const char *name) +{ -+ struct sflash *sfl; ++ unsigned long flags; ++ int ret; + -+ if (offset >= sflash.size) -+ return -22; ++ spin_lock_irqsave(&nvram_lock, flags); ++ ret = _nvram_unset(name); ++ spin_unlock_irqrestore(&nvram_lock, flags); + -+ sfl = &sflash; -+ switch (sfl->type) { -+ case SFLASH_ST: -+ sflash_cmd(cc, SFLASH_ST_WREN); -+ W_REG(&cc->flashaddress, offset); -+ sflash_cmd(cc, SFLASH_ST_SE); -+ return sfl->blocksize; -+ case SFLASH_AT: -+ W_REG(&cc->flashaddress, offset << 1); -+ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); -+ return sfl->blocksize; -+ } ++ return ret; ++} + -+ return 0; ++static void ++erase_callback(struct erase_info *done) ++{ ++ wait_queue_head_t *wait_q = (wait_queue_head_t *) done->priv; ++ wake_up(wait_q); +} + -+/* -+ * writes the appropriate range of flash, a NULL buf simply erases -+ * the region of flash -+ */ +int -+sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++nvram_commit(void) +{ -+ struct sflash *sfl; -+ uchar *block = NULL, *cur_ptr, *blk_ptr; -+ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; -+ uint blk_offset, blk_len, copied; -+ int bytes, ret = 0; ++ char *buf; ++ size_t erasesize, len, magic_len; ++ unsigned int i; ++ int ret; ++ struct nvram_header *header; ++ unsigned long flags; ++ u_int32_t offset; ++ DECLARE_WAITQUEUE(wait, current); ++ wait_queue_head_t wait_q; ++ struct erase_info erase; ++ u_int32_t magic_offset = 0; /* Offset for writing MAGIC # */ + -+ /* Check address range */ -+ if (len <= 0) -+ return 0; ++ if (!nvram_mtd) { ++ printk("nvram_commit: NVRAM not found\n"); ++ return -ENODEV; ++ } + -+ sfl = &sflash; -+ if ((offset + len) > sfl->size) -+ return -1; ++ if (in_interrupt()) { ++ printk("nvram_commit: not committing in interrupt\n"); ++ return -EINVAL; ++ } + -+ blocksize = sfl->blocksize; -+ mask = blocksize - 1; ++ /* Backup sector blocks to be erased */ ++ erasesize = ROUNDUP(NVRAM_SPACE, nvram_mtd->erasesize); ++ if (!(buf = kmalloc(erasesize, GFP_KERNEL))) { ++ printk("nvram_commit: out of memory\n"); ++ return -ENOMEM; ++ } + -+ /* Allocate a block of mem */ -+ if (!(block = MALLOC(NULL, blocksize))) -+ return -1; ++ down(&nvram_sem); + -+ while (len) { -+ /* Align offset */ -+ cur_offset = offset & ~mask; -+ cur_length = blocksize; -+ cur_ptr = block; ++ if ((i = erasesize - NVRAM_SPACE) > 0) { ++ offset = nvram_mtd->size - erasesize; ++ len = 0; ++ ret = MTD_READ(nvram_mtd, offset, i, &len, buf); ++ if (ret || len != i) { ++ printk("nvram_commit: read error ret = %d, len = %d/%d\n", ret, len, i); ++ ret = -EIO; ++ goto done; ++ } ++ header = (struct nvram_header *)(buf + i); ++ magic_offset = i + ((void *)&header->magic - (void *)header); ++ } else { ++ offset = nvram_mtd->size - NVRAM_SPACE; ++ magic_offset = ((void *)&header->magic - (void *)header); ++ header = (struct nvram_header *)buf; ++ } + -+ remainder = blocksize - (offset & mask); -+ if (len < remainder) -+ cur_retlen = len; -+ else -+ cur_retlen = remainder; ++ /* clear the existing magic # to mark the NVRAM as unusable ++ we can pull MAGIC bits low without erase */ ++ header->magic = NVRAM_CLEAR_MAGIC; /* All zeros magic */ + -+ /* buf == NULL means erase only */ -+ if (buf) { -+ /* Copy existing data into holding block if necessary */ -+ if ((offset & mask) || (len < blocksize)) { -+ blk_offset = cur_offset; -+ blk_len = cur_length; -+ blk_ptr = cur_ptr; ++ /* Unlock sector blocks (for Intel 28F320C3B flash) , 20060309 */ ++ if(nvram_mtd->unlock) ++ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize); + -+ /* Copy entire block */ -+ while(blk_len) { -+ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); -+ blk_offset += copied; -+ blk_len -= copied; -+ blk_ptr += copied; -+ } -+ } ++ ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic), ++ &magic_len, (char *)&header->magic); ++ if (ret || magic_len != sizeof(header->magic)) { ++ printk("nvram_commit: clear MAGIC error\n"); ++ ret = -EIO; ++ goto done; ++ } + -+ /* Copy input data into holding block */ -+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); -+ } ++ header->magic = NVRAM_MAGIC; /* reset MAGIC before we regenerate the NVRAM, ++ otherwise we'll have an incorrect CRC */ ++ /* Regenerate NVRAM */ ++ spin_lock_irqsave(&nvram_lock, flags); ++ ret = _nvram_commit(header); ++ spin_unlock_irqrestore(&nvram_lock, flags); ++ if (ret) ++ goto done; + -+ /* Erase block */ -+ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) -+ goto done; -+ while (sflash_poll(cc, (uint) cur_offset)); ++ /* Erase sector blocks */ ++ init_waitqueue_head(&wait_q); ++ for (; offset < nvram_mtd->size - NVRAM_SPACE + header->len; offset += nvram_mtd->erasesize) { ++ erase.mtd = nvram_mtd; ++ erase.addr = offset; ++ erase.len = nvram_mtd->erasesize; ++ erase.callback = erase_callback; ++ erase.priv = (u_long) &wait_q; + -+ /* buf == NULL means erase only */ -+ if (!buf) { -+ offset += cur_retlen; -+ len -= cur_retlen; -+ continue; -+ } ++ set_current_state(TASK_INTERRUPTIBLE); ++ add_wait_queue(&wait_q, &wait); + -+ /* Write holding block */ -+ while (cur_length > 0) { -+ if ((bytes = sflash_write(cc, -+ (uint) cur_offset, -+ (uint) cur_length, -+ (uchar *) cur_ptr)) < 0) { -+ ret = bytes; -+ goto done; -+ } -+ while (sflash_poll(cc, (uint) cur_offset)); -+ cur_offset += bytes; -+ cur_length -= bytes; -+ cur_ptr += bytes; ++ /* Unlock sector blocks */ ++ if (nvram_mtd->unlock) ++ nvram_mtd->unlock(nvram_mtd, offset, nvram_mtd->erasesize); ++ ++ if ((ret = MTD_ERASE(nvram_mtd, &erase))) { ++ set_current_state(TASK_RUNNING); ++ remove_wait_queue(&wait_q, &wait); ++ printk("nvram_commit: erase error\n"); ++ goto done; + } + -+ offset += cur_retlen; -+ len -= cur_retlen; -+ buf += cur_retlen; ++ /* Wait for erase to finish */ ++ schedule(); ++ remove_wait_queue(&wait_q, &wait); + } + -+ ret = len; -+done: -+ if (block) -+ MFREE(NULL, block, blocksize); -+ return ret; -+} -+ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/time.c linux-2.4.32-brcm/arch/mips/bcm947xx/time.c ---- linux-2.4.32/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/time.c 2005-12-16 23:39:10.948837000 +0100 -@@ -0,0 +1,118 @@ -+/* -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: time.c,v 1.1 2005/03/16 13:49:59 wbx Exp $ -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ /* Write partition up to end of data area */ ++ header->magic = NVRAM_INVALID_MAGIC; /* All ones magic */ ++ offset = nvram_mtd->size - erasesize; ++ i = erasesize - NVRAM_SPACE + header->len; ++ ret = MTD_WRITE(nvram_mtd, offset, i, &len, buf); ++ if (ret || len != i) { ++ printk("nvram_commit: write error\n"); ++ ret = -EIO; ++ goto done; ++ } + -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ /* Now mark the NVRAM in flash as "valid" by setting the correct ++ MAGIC # */ ++ header->magic = NVRAM_MAGIC; ++ ret = MTD_WRITE(nvram_mtd, offset + magic_offset, sizeof(header->magic), ++ &magic_len, (char *)&header->magic); ++ if (ret || magic_len != sizeof(header->magic)) { ++ printk("nvram_commit: write MAGIC error\n"); ++ ret = -EIO; ++ goto done; ++ } + -+/* Global SB handle */ -+extern void *bcm947xx_sbh; -+extern spinlock_t bcm947xx_sbh_lock; ++ /* ++ * Reading a few bytes back here will put the device ++ * back to the correct mode on certain flashes */ ++ offset = nvram_mtd->size - erasesize; ++ ret = MTD_READ(nvram_mtd, offset, 4, &len, buf); + -+/* Convenience */ -+#define sbh bcm947xx_sbh -+#define sbh_lock bcm947xx_sbh_lock ++ done: ++ up(&nvram_sem); ++ kfree(buf); + -+extern int panic_timeout; -+static int watchdog = 0; -+static u8 *mcr = NULL; ++ return ret; ++} + -+void __init -+bcm947xx_time_init(void) ++int ++nvram_getall(char *buf, int count) +{ -+ unsigned int hz; -+ extifregs_t *eir; ++ unsigned long flags; ++ int ret; + -+ /* -+ * Use deterministic values for initial counter interrupt -+ * so that calibrate delay avoids encountering a counter wrap. -+ */ -+ write_c0_count(0); -+ write_c0_compare(0xffff); ++ spin_lock_irqsave(&nvram_lock, flags); ++ if (nvram_major >= 0) ++ ret = _nvram_getall(buf, count); ++ else ++ ret = early_nvram_getall(buf, count); ++ spin_unlock_irqrestore(&nvram_lock, flags); + -+ if (!(hz = sb_mips_clock(sbh))) -+ hz = 100000000; ++ return ret; ++} + -+ printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh), -+ (hz + 500000) / 1000000); + -+ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ -+ mips_hpt_frequency = hz / 2; + -+ /* Set watchdog interval in ms */ -+ watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0); -+ -+ /* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */ -+ if (watchdog > 0) { -+ if (watchdog < 3000) -+ watchdog = 3000; ++ ++ ++ ++ ++/* User mode interface below */ ++ ++static ssize_t ++dev_nvram_read(struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ char tmp[100], *name = tmp, *value; ++ ssize_t ret; ++ unsigned long off; ++ ++ if (count > sizeof(tmp)) { ++ if (!(name = kmalloc(count, GFP_KERNEL))) ++ return -ENOMEM; + } + ++ if (copy_from_user(name, buf, count)) { ++ ret = -EFAULT; ++ goto done; ++ } + -+ /* Set panic timeout in seconds */ -+ panic_timeout = watchdog / 1000; ++ if (*name == '\0') { ++ /* Get all variables */ ++ ret = nvram_getall(name, count); ++ if (ret == 0) { ++ if (copy_to_user(buf, name, count)) { ++ ret = -EFAULT; ++ goto done; ++ } ++ ret = count; ++ } ++ } else { ++ if (!(value = nvram_get(name))) { ++ ret = 0; ++ goto done; ++ } + -+ /* Setup blink */ -+ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { -+ sbconfig_t *sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF); -+ unsigned long base = EXTIF_CFGIF_BASE(sb_base(readl(&sb->sbadmatch1))); -+ mcr = (u8 *) ioremap_nocache(base + UART_MCR, 1); ++ /* Provide the offset into mmap() space */ ++ off = (unsigned long) value - (unsigned long) nvram_buf; ++ ++ if (put_user(off, (unsigned long *) buf)) { ++ ret = -EFAULT; ++ goto done; ++ } ++ ++ ret = sizeof(unsigned long); + } ++ ++ flush_cache_all(); ++ ++done: ++ if (name != tmp) ++ kfree(name); ++ ++ return ret; +} + -+static void -+bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++static ssize_t ++dev_nvram_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +{ -+ /* Generic MIPS timer code */ -+ timer_interrupt(irq, dev_id, regs); ++ char tmp[100], *name = tmp, *value; ++ ssize_t ret; + -+ /* Set the watchdog timer to reset after the specified number of ms */ -+ if (watchdog > 0) -+ sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog); ++ if (count > sizeof(tmp)) { ++ if (!(name = kmalloc(count, GFP_KERNEL))) ++ return -ENOMEM; ++ } + -+#ifdef CONFIG_HWSIM -+ (*((int *)0xa0000f1c))++; -+#else -+ /* Blink one of the LEDs in the external UART */ -+ if (mcr && !(jiffies % (HZ/2))) -+ writeb(readb(mcr) ^ UART_MCR_OUT2, mcr); -+#endif ++ if (copy_from_user(name, buf, count)) { ++ ret = -EFAULT; ++ goto done; ++ } ++ ++ value = name; ++ name = strsep(&value, "="); ++ if (value) ++ ret = nvram_set(name, value) ? : count; ++ else ++ ret = nvram_unset(name) ? : count; ++ ++ done: ++ if (name != tmp) ++ kfree(name); ++ ++ return ret; ++} ++ ++static int ++dev_nvram_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ if (cmd != NVRAM_MAGIC) ++ return -EINVAL; ++ ++ return nvram_commit(); +} + -+static struct irqaction bcm947xx_timer_irqaction = { -+ bcm947xx_timer_interrupt, -+ SA_INTERRUPT, -+ 0, -+ "timer", -+ NULL, -+ NULL -+}; ++static int ++dev_nvram_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ unsigned long offset = virt_to_phys(nvram_buf); + -+void __init -+bcm947xx_timer_setup(struct irqaction *irq) ++ if (remap_page_range(vma->vm_start, offset, vma->vm_end-vma->vm_start, ++ vma->vm_page_prot)) ++ return -EAGAIN; ++ ++ return 0; ++} ++ ++static int ++dev_nvram_open(struct inode *inode, struct file * file) +{ -+ /* Enable the timer interrupt */ -+ setup_irq(7, &bcm947xx_timer_irqaction); ++ MOD_INC_USE_COUNT; ++ return 0; +} -diff -Nur linux-2.4.32/arch/mips/config-shared.in linux-2.4.32-brcm/arch/mips/config-shared.in ---- linux-2.4.32/arch/mips/config-shared.in 2005-01-19 15:09:27.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/config-shared.in 2005-12-16 23:39:11.080845250 +0100 -@@ -205,6 +205,14 @@ - fi - define_bool CONFIG_MIPS_RTC y - fi -+dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL -+dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM -+if [ "$CONFIG_BCM947XX" = "y" ] ; then -+ bool ' Support for Broadcom BCM4710' CONFIG_BCM4710 -+ bool ' Support for Broadcom BCM4310' CONFIG_BCM4310 -+ bool ' Support for Broadcom BCM4704' CONFIG_BCM4704 -+ bool ' Support for Broadcom BCM5365' CONFIG_BCM5365 -+fi - bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI - bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226 - bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229 -@@ -226,6 +234,11 @@ - define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n - - # -+# Provide an option for a default kernel command line -+# -+string 'Default kernel command string' CONFIG_CMDLINE "" + -+# - # Select some configuration options automatically based on user selections. - # - if [ "$CONFIG_ACER_PICA_61" = "y" ]; then -@@ -533,6 +546,13 @@ - define_bool CONFIG_SWAP_IO_SPACE_L y - define_bool CONFIG_BOOT_ELF32 y - fi -+if [ "$CONFIG_BCM947XX" = "y" ] ; then -+ define_bool CONFIG_PCI y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_NEW_TIME_C y -+ define_bool CONFIG_NEW_IRQ y -+ define_bool CONFIG_HND y -+fi - if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then - define_bool CONFIG_ARC32 y - define_bool CONFIG_ARC_MEMORY y -@@ -1011,7 +1031,11 @@ - - bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE - bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG --bool 'Remote GDB kernel debugging' CONFIG_KGDB -+if [ "$CONFIG_BCM947XX" = "y" ] ; then -+ bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG -+else -+ bool 'Remote GDB kernel debugging' CONFIG_KGDB -+fi - dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB - if [ "$CONFIG_KGDB" = "y" ]; then - define_bool CONFIG_DEBUG_INFO y -diff -Nur linux-2.4.32/arch/mips/kernel/cpu-probe.c linux-2.4.32-brcm/arch/mips/kernel/cpu-probe.c ---- linux-2.4.32/arch/mips/kernel/cpu-probe.c 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/kernel/cpu-probe.c 2005-12-16 23:39:11.084845500 +0100 -@@ -174,7 +174,7 @@ - - static inline void cpu_probe_legacy(struct cpuinfo_mips *c) - { -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_R2000: - c->cputype = CPU_R2000; - c->isa_level = MIPS_CPU_ISA_I; -@@ -184,7 +184,7 @@ - c->tlbsize = 64; - break; - case PRID_IMP_R3000: -- if ((c->processor_id & 0xff) == PRID_REV_R3000A) -+ if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) - if (cpu_has_confreg()) - c->cputype = CPU_R3081E; - else -@@ -199,12 +199,12 @@ - break; - case PRID_IMP_R4000: - if (read_c0_config() & CONF_SC) { -- if ((c->processor_id & 0xff) >= PRID_REV_R4400) -+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) - c->cputype = CPU_R4400PC; - else - c->cputype = CPU_R4000PC; - } else { -- if ((c->processor_id & 0xff) >= PRID_REV_R4400) -+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) - c->cputype = CPU_R4400SC; - else - c->cputype = CPU_R4000SC; -@@ -450,7 +450,7 @@ - static inline void cpu_probe_mips(struct cpuinfo_mips *c) - { - decode_config1(c); -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_4KC: - c->cputype = CPU_4KC; - c->isa_level = MIPS_CPU_ISA_M32; -@@ -491,10 +491,10 @@ - { - decode_config1(c); - c->options |= MIPS_CPU_PREFETCH; -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_AU1_REV1: - case PRID_IMP_AU1_REV2: -- switch ((c->processor_id >> 24) & 0xff) { -+ switch ((c->processor_id >> 24) & PRID_REV_MASK) { - case 0: - c->cputype = CPU_AU1000; - break; -@@ -522,10 +522,34 @@ - } - } - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ c->options |= MIPS_CPU_PREFETCH; -+ switch (c->processor_id & PRID_IMP_MASK) { -+ case PRID_IMP_BCM4710: -+ c->cputype = CPU_BCM4710; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ c->scache.flags = MIPS_CACHE_NOT_PRESENT; -+ break; -+ case PRID_IMP_4KC: -+ case PRID_IMP_BCM3302: -+ c->cputype = CPU_BCM3302; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ c->scache.flags = MIPS_CACHE_NOT_PRESENT; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - static inline void cpu_probe_sibyte(struct cpuinfo_mips *c) - { - decode_config1(c); -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_SB1: - c->cputype = CPU_SB1; - c->isa_level = MIPS_CPU_ISA_M64; -@@ -547,7 +571,7 @@ - static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) - { - decode_config1(c); -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_SR71000: - c->cputype = CPU_SR71000; - c->isa_level = MIPS_CPU_ISA_M64; -@@ -572,7 +596,7 @@ - c->cputype = CPU_UNKNOWN; - - c->processor_id = read_c0_prid(); -- switch (c->processor_id & 0xff0000) { -+ switch (c->processor_id & PRID_COMP_MASK) { - - case PRID_COMP_LEGACY: - cpu_probe_legacy(c); -@@ -583,6 +607,9 @@ - case PRID_COMP_ALCHEMY: - cpu_probe_alchemy(c); - break; -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; -diff -Nur linux-2.4.32/arch/mips/kernel/head.S linux-2.4.32-brcm/arch/mips/kernel/head.S ---- linux-2.4.32/arch/mips/kernel/head.S 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/kernel/head.S 2005-12-16 23:39:11.084845500 +0100 -@@ -28,12 +28,20 @@ - #include - #include - -+#ifdef CONFIG_BCM4710 -+#undef eret -+#define eret nop; nop; eret -+#endif -+ - .text -+ j kernel_entry -+ nop -+ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. - */ -- .fill 0x400 -+ .fill 0x3f4 - - /* The following two symbols are used for kernel profiling. */ - EXPORT(stext) -diff -Nur linux-2.4.32/arch/mips/kernel/proc.c linux-2.4.32-brcm/arch/mips/kernel/proc.c ---- linux-2.4.32/arch/mips/kernel/proc.c 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/kernel/proc.c 2005-12-16 23:39:11.084845500 +0100 -@@ -78,9 +78,10 @@ - [CPU_AU1550] "Au1550", - [CPU_24K] "MIPS 24K", - [CPU_AU1200] "Au1200", -+ [CPU_BCM4710] "BCM4710", -+ [CPU_BCM3302] "BCM3302", - }; - -- - static int show_cpuinfo(struct seq_file *m, void *v) - { - unsigned int version = current_cpu_data.processor_id; -diff -Nur linux-2.4.32/arch/mips/kernel/setup.c linux-2.4.32-brcm/arch/mips/kernel/setup.c ---- linux-2.4.32/arch/mips/kernel/setup.c 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/kernel/setup.c 2005-12-16 23:39:11.140849000 +0100 -@@ -495,6 +495,7 @@ - void swarm_setup(void); - void hp_setup(void); - void au1x00_setup(void); -+ void brcm_setup(void); - void frame_info_init(void); - - frame_info_init(); -@@ -693,6 +694,11 @@ - pmc_yosemite_setup(); - break; - #endif -+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310) -+ case MACH_GROUP_BRCM: -+ brcm_setup(); -+ break; -+#endif - default: - panic("Unsupported architecture"); - } -diff -Nur linux-2.4.32/arch/mips/kernel/traps.c linux-2.4.32-brcm/arch/mips/kernel/traps.c ---- linux-2.4.32/arch/mips/kernel/traps.c 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/kernel/traps.c 2005-12-16 23:39:11.140849000 +0100 -@@ -913,6 +913,7 @@ - void __init trap_init(void) - { - extern char except_vec1_generic; -+ extern char except_vec2_generic; - extern char except_vec3_generic, except_vec3_r4000; - extern char except_vec_ejtag_debug; - extern char except_vec4; -@@ -922,6 +923,7 @@ - - /* Copy the generic exception handler code to it's final destination. */ - memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); -+ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80); - - /* - * Setup default vectors -@@ -980,6 +982,12 @@ - set_except_vector(13, handle_tr); - set_except_vector(22, handle_mdmx); - -+ if (current_cpu_data.cputype == CPU_SB1) { -+ /* Enable timer interrupt and scd mapped interrupt */ -+ clear_c0_status(0xf000); -+ set_c0_status(0xc00); -+ } -+ - if (cpu_has_fpu && !cpu_has_nofpuex) - set_except_vector(15, handle_fpe); - -diff -Nur linux-2.4.32/arch/mips/Makefile linux-2.4.32-brcm/arch/mips/Makefile ---- linux-2.4.32/arch/mips/Makefile 2005-01-19 15:09:26.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/Makefile 2005-12-16 23:39:10.668819500 +0100 -@@ -715,6 +715,19 @@ - endif - - # -+# Broadcom BCM947XX variants -+# -+ifdef CONFIG_BCM947XX -+LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o -+SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx -+LOADADDR := 0x80001000 -+ -+zImage: vmlinux -+ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed -+export LOADADDR -+endif -+ -+# - # Choosing incompatible machines durings configuration will result in - # error messages during linking. Select a default linkscript if - # none has been choosen above. -@@ -767,6 +780,7 @@ - $(MAKE) -C arch/$(ARCH)/tools clean - $(MAKE) -C arch/mips/baget clean - $(MAKE) -C arch/mips/lasat clean -+ $(MAKE) -C arch/mips/bcm947xx/compressed clean - - archmrproper: - @$(MAKEBOOT) mrproper -diff -Nur linux-2.4.32/arch/mips/mm/c-r4k.c linux-2.4.32-brcm/arch/mips/mm/c-r4k.c ---- linux-2.4.32/arch/mips/mm/c-r4k.c 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/mm/c-r4k.c 2005-12-16 23:39:11.144849250 +0100 -@@ -1114,3 +1114,47 @@ - build_clear_page(); - build_copy_page(); - } -+ -+#ifdef CONFIG_BCM4704 -+static void __init mips32_icache_fill(unsigned long addr, uint nbytes) -+{ -+ unsigned long ic_lsize = current_cpu_data.icache.linesz; -+ int i; -+ for (i = 0; i < nbytes; i += ic_lsize) -+ fill_icache_line((addr + i)); -+} -+ -+/* -+ * This must be run from the cache on 4704A0 -+ * so there are no mips core BIU ops in progress -+ * when the PFC is enabled. -+ */ -+#define PFC_CR0 0xff400000 /* control reg 0 */ -+#define PFC_CR1 0xff400004 /* control reg 1 */ -+static void __init enable_pfc(u32 mode) -+{ -+ /* write range */ -+ *(volatile u32 *)PFC_CR1 = 0xffff0000; -+ -+ /* enable */ -+ *(volatile u32 *)PFC_CR0 = mode; -+} -+#endif -+ -+ -+void check_enable_mips_pfc(int val) -+{ -+ -+#ifdef CONFIG_BCM4704 -+ struct cpuinfo_mips *c = ¤t_cpu_data; -+ -+ /* enable prefetch cache */ -+ if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302) -+ && (read_c0_diag() & (1 << 29))) { -+ mips32_icache_fill((unsigned long) &enable_pfc, 64); -+ enable_pfc(val); -+ } -+#endif -+} -+ -+ -diff -Nur linux-2.4.32/arch/mips/pci/Makefile linux-2.4.32-brcm/arch/mips/pci/Makefile ---- linux-2.4.32/arch/mips/pci/Makefile 2005-01-19 15:09:29.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/pci/Makefile 2005-12-16 23:39:11.144849250 +0100 -@@ -13,7 +13,9 @@ - obj-$(CONFIG_MIPS_MSC) += ops-msc.o - obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o - obj-$(CONFIG_SNI_RM200_PCI) += ops-sni.o -+ifndef CONFIG_BCM947XX - obj-y += pci.o -+endif - obj-$(CONFIG_PCI_AUTO) += pci_auto.o - - include $(TOPDIR)/Rules.make -diff -Nur linux-2.4.32/drivers/char/serial.c linux-2.4.32-brcm/drivers/char/serial.c ---- linux-2.4.32/drivers/char/serial.c 2005-11-16 20:12:54.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/char/serial.c 2005-12-16 23:39:11.200852750 +0100 -@@ -422,6 +422,10 @@ - return inb(info->port+1); - #endif - case SERIAL_IO_MEM: -+#ifdef CONFIG_BCM4310 -+ readb((unsigned long) info->iomem_base + -+ (UART_SCR<iomem_reg_shift)); -+#endif - return readb((unsigned long) info->iomem_base + - (offset<iomem_reg_shift)); - default: -@@ -442,6 +446,9 @@ - case SERIAL_IO_MEM: - writeb(value, (unsigned long) info->iomem_base + - (offset<iomem_reg_shift)); -+#ifdef CONFIG_BCM4704 -+ *((volatile unsigned int *) KSEG1ADDR(0x18000000)); -+#endif - break; - default: - outb(value, info->port+offset); -@@ -1704,7 +1711,7 @@ - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) -- quot = baud_base / baud; -+ quot = (baud_base + (baud / 2)) / baud; - } - /* If the quotient is zero refuse the change */ - if (!quot && old_termios) { -@@ -1721,12 +1728,12 @@ - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) -- quot = baud_base / baud; -+ quot = (baud_base + (baud / 2)) / baud; - } - } - /* As a last resort, if the quotient is zero, default to 9600 bps */ - if (!quot) -- quot = baud_base / 9600; -+ quot = (baud_base + 4800) / 9600; - /* - * Work around a bug in the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates -@@ -5982,6 +5989,13 @@ - * Divisor, bytesize and parity - */ - state = rs_table + co->index; -+ /* -+ * Safe guard: state structure must have been initialized -+ */ -+ if (state->iomem_base == NULL) { -+ printk("!unable to setup serial console!\n"); -+ return -1; -+ } - if (doflow) - state->flags |= ASYNC_CONS_FLOW; - info = &async_sercons; -@@ -5995,7 +6009,7 @@ - info->io_type = state->io_type; - info->iomem_base = state->iomem_base; - info->iomem_reg_shift = state->iomem_reg_shift; -- quot = state->baud_base / baud; -+ quot = (state->baud_base + (baud / 2)) / baud; - cval = cflag & (CSIZE | CSTOPB); - #if defined(__powerpc__) || defined(__alpha__) - cval >>= 8; -diff -Nur linux-2.4.32/drivers/net/Config.in linux-2.4.32-brcm/drivers/net/Config.in ---- linux-2.4.32/drivers/net/Config.in 2005-01-19 15:09:56.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/Config.in 2005-12-16 23:39:11.232854750 +0100 -@@ -2,6 +2,8 @@ - # Network device configuration - # - -+tristate 'Broadcom Home Network Division' CONFIG_HND $CONFIG_PCI -+ - source drivers/net/arcnet/Config.in - - tristate 'Dummy net driver support' CONFIG_DUMMY -diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/hnd/bcmsrom.c ---- linux-2.4.32/drivers/net/hnd/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/bcmsrom.c 2005-12-16 23:39:11.284858000 +0100 -@@ -0,0 +1,938 @@ -+/* -+ * Misc useful routines to access NIC SROM/OTP . -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct ether_addr { -+ uint8 octet[6]; -+} PACKED; -+ -+#define VARS_MAX 4096 /* should be reduced */ -+ -+#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */ -+#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */ -+ -+static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count); -+static int initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, int *count); -+static int initvars_flash_sb(void *sbh, char **vars, int *count); -+static int srom_parsecis(osl_t *osh, uint8 *cis, char **vars, int *count); -+static int sprom_cmd_pcmcia(osl_t *osh, uint8 cmd); -+static int sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data); -+static int sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data); -+static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc); -+ -+static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count); -+static int initvars_flash(osl_t *osh, char **vp, int len, char *devpath); -+ -+/* -+ * Initialize local vars from the right source for this platform. -+ * Return 0 on success, nonzero on error. -+ */ -+int -+srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count) -+{ -+ ASSERT(bustype == BUSTYPE(bustype)); -+ if (vars == NULL || count == NULL) -+ return (0); -+ -+ switch (BUSTYPE(bustype)) { -+ case SB_BUS: -+ case JTAG_BUS: -+ return initvars_flash_sb(sbh, vars, count); -+ -+ case PCI_BUS: -+ ASSERT(curmap); /* can not be NULL */ -+ return initvars_srom_pci(sbh, curmap, vars, count); -+ -+ case PCMCIA_BUS: -+ return initvars_cis_pcmcia(sbh, osh, vars, count); -+ -+ -+ default: -+ ASSERT(0); -+ } -+ return (-1); -+} -+ -+/* support only 16-bit word read from srom */ -+int -+srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) -+{ -+ void *srom; -+ uint i, off, nw; -+ -+ ASSERT(bustype == BUSTYPE(bustype)); -+ -+ /* check input - 16-bit access only */ -+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) -+ return 1; -+ -+ off = byteoff / 2; -+ nw = nbytes / 2; -+ -+ if (BUSTYPE(bustype) == PCI_BUS) { -+ if (!curmap) -+ return 1; -+ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET; -+ if (sprom_read_pci(srom, off, buf, nw, FALSE)) -+ return 1; -+ } else if (BUSTYPE(bustype) == PCMCIA_BUS) { -+ for (i = 0; i < nw; i++) { -+ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) -+ return 1; -+ } -+ } else { -+ return 1; -+ } -+ -+ return 0; -+} -+ -+/* support only 16-bit word write into srom */ -+int -+srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) -+{ -+ uint16 *srom; -+ uint i, off, nw, crc_range; -+ uint16 image[SPROM_SIZE], *p; -+ uint8 crc; -+ volatile uint32 val32; -+ -+ ASSERT(bustype == BUSTYPE(bustype)); -+ -+ /* check input - 16-bit access only */ -+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) -+ return 1; -+ -+ crc_range = (((BUSTYPE(bustype) == PCMCIA_BUS) || (BUSTYPE(bustype) == SDIO_BUS)) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; -+ -+ /* if changes made inside crc cover range */ -+ if (byteoff < crc_range) { -+ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; -+ /* read data including entire first 64 words from srom */ -+ if (srom_read(bustype, curmap, osh, 0, nw * 2, image)) -+ return 1; -+ /* make changes */ -+ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); -+ /* calculate crc */ -+ htol16_buf(image, crc_range); -+ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); -+ ltoh16_buf(image, crc_range); -+ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); -+ p = image; -+ off = 0; -+ } else { -+ p = buf; -+ off = byteoff / 2; -+ nw = nbytes / 2; -+ } -+ -+ if (BUSTYPE(bustype) == PCI_BUS) { -+ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET); -+ /* enable writes to the SPROM */ -+ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); -+ val32 |= SPROM_WRITEEN; -+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); -+ bcm_mdelay(WRITE_ENABLE_DELAY); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ W_REG(&srom[off + i], p[i]); -+ bcm_mdelay(WRITE_WORD_DELAY); -+ } -+ /* disable writes to the SPROM */ -+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); -+ } else if (BUSTYPE(bustype) == PCMCIA_BUS) { -+ /* enable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WEN)) -+ return 1; -+ bcm_mdelay(WRITE_ENABLE_DELAY); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]); -+ bcm_mdelay(WRITE_WORD_DELAY); -+ } -+ /* disable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WDS)) -+ return 1; -+ } else { -+ return 1; -+ } -+ -+ bcm_mdelay(WRITE_ENABLE_DELAY); -+ return 0; -+} -+ -+ -+static int -+srom_parsecis(osl_t *osh, uint8 *cis, char **vars, int *count) -+{ -+ char eabuf[32]; -+ char *vp, *base; -+ uint8 tup, tlen, sromrev = 1; -+ int i, j; -+ uint varsize; -+ bool ag_init = FALSE; -+ uint32 w32; -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ base = vp = MALLOC(osh, VARS_MAX); -+ ASSERT(vp); -+ if (!vp) -+ return -2; -+ -+ i = 0; -+ do { -+ tup = cis[i++]; -+ tlen = cis[i++]; -+ if ((i + tlen) >= CIS_SIZE) -+ break; -+ -+ switch (tup) { -+ case CISTPL_MANFID: -+ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); -+ vp++; -+ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); -+ vp++; -+ break; -+ -+ case CISTPL_FUNCE: -+ if (cis[i] == LAN_NID) { -+ ASSERT(cis[i + 1] == 6); -+ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; -+ } -+ break; -+ -+ case CISTPL_CFTABLE: -+ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); -+ vp++; -+ break; -+ -+ case CISTPL_BRCM_HNBU: -+ switch (cis[i]) { -+ case HNBU_SROMREV: -+ sromrev = cis[i + 1]; -+ break; -+ -+ case HNBU_CHIPID: -+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]); -+ vp++; -+ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]); -+ vp++; -+ if (tlen == 7) { -+ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]); -+ vp++; -+ } -+ break; -+ -+ case HNBU_BOARDREV: -+ vp += sprintf(vp, "boardrev=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_AA: -+ vp += sprintf(vp, "aa0=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_AG: -+ vp += sprintf(vp, "ag0=%d", cis[i + 1]); -+ vp++; -+ ag_init = TRUE; -+ break; -+ -+ case HNBU_CC: -+ ASSERT(sromrev > 1); -+ vp += sprintf(vp, "cc=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_PAPARMS: -+ if (tlen == 2) { -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 1]); -+ vp++; -+ } else if (tlen >= 9) { -+ if (tlen == 10) { -+ ASSERT(sromrev == 2); -+ vp += sprintf(vp, "opo=%d", cis[i + 9]); -+ vp++; -+ } else -+ ASSERT(tlen == 9); -+ -+ for (j = 0; j < 3; j++) { -+ vp += sprintf(vp, "pa0b%d=%d", j, -+ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]); -+ vp++; -+ } -+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); -+ vp++; -+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + 8]); -+ vp++; -+ } else -+ ASSERT(tlen >= 9); -+ break; -+ -+ case HNBU_OEM: -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4], -+ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]); -+ vp++; -+ break; -+ -+ case HNBU_BOARDFLAGS: -+ w32 = (cis[i + 2] << 8) + cis[i + 1]; -+ if (tlen == 5) -+ w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16); -+ vp += sprintf(vp, "boardflags=0x%x", w32); -+ vp++; -+ break; -+ -+ case HNBU_LEDS: -+ if (cis[i + 1] != 0xff) { -+ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]); -+ vp++; -+ } -+ if (cis[i + 2] != 0xff) { -+ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]); -+ vp++; -+ } -+ if (cis[i + 3] != 0xff) { -+ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]); -+ vp++; -+ } -+ if (cis[i + 4] != 0xff) { -+ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]); -+ vp++; -+ } -+ break; -+ -+ case HNBU_CCODE: -+ ASSERT(sromrev > 1); -+ vp += sprintf(vp, "ccode=%c%c", cis[i + 1], cis[i + 2]); -+ vp++; -+ vp += sprintf(vp, "cctl=0x%x", cis[i + 3]); -+ vp++; -+ break; -+ -+ case HNBU_CCKPO: -+ ASSERT(sromrev > 2); -+ vp += sprintf(vp, "cckpo=0x%x", (cis[i + 2] << 8) | cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_OFDMPO: -+ ASSERT(sromrev > 2); -+ vp += sprintf(vp, "ofdmpo=0x%x", (cis[i + 4] << 24) | -+ (cis[i + 3] << 16) | (cis[i + 2] << 8) | cis[i + 1]); -+ vp++; -+ break; -+ } -+ break; -+ -+ } -+ i += tlen; -+ } while (tup != 0xff); -+ -+ /* Set the srom version */ -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; -+ -+ /* if there is no antenna gain field, set default */ -+ if (ag_init == FALSE) { -+ ASSERT(sromrev == 1); -+ vp += sprintf(vp, "ag0=%d", 0xff); -+ vp++; -+ } -+ -+ /* final nullbyte terminator */ -+ *vp++ = '\0'; -+ varsize = (uint)(vp - base); -+ -+ ASSERT((vp - base) < VARS_MAX); -+ -+ if (varsize == VARS_MAX) { -+ *vars = base; -+ } else { -+ vp = MALLOC(osh, varsize); -+ ASSERT(vp); -+ if (vp) -+ bcopy(base, vp, varsize); -+ MFREE(osh, base, VARS_MAX); -+ *vars = vp; -+ if (!vp) { -+ *count = 0; -+ return -2; -+ } -+ } -+ *count = varsize; -+ -+ return (0); -+} -+ -+ -+/* set PCMCIA sprom command register */ -+static int -+sprom_cmd_pcmcia(osl_t *osh, uint8 cmd) -+{ -+ uint8 status = 0; -+ uint wait_cnt = 1000; -+ -+ /* write sprom command register */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); -+ -+ /* wait status */ -+ while (wait_cnt--) { -+ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); -+ if (status & SROM_DONE) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/* read a word from the PCMCIA srom */ -+static int -+sprom_read_pcmcia(osl_t *osh, uint16 addr, uint16 *data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; -+ -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); -+ -+ /* do read */ -+ if (sprom_cmd_pcmcia(osh, SROM_READ)) -+ return 1; -+ -+ /* read data */ -+ data_h = data_l = 0; -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); -+ -+ *data = (data_h << 8) | data_l; -+ return 0; -+} -+ -+/* write a word to the PCMCIA srom */ -+static int -+sprom_write_pcmcia(osl_t *osh, uint16 addr, uint16 data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; -+ -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ data_l = (uint8)(data & 0xff); -+ data_h = (uint8)((data >> 8) & 0xff); -+ -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); -+ -+ /* write data */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); -+ -+ /* do write */ -+ return sprom_cmd_pcmcia(osh, SROM_WRITE); -+} -+ -+/* -+ * Read in and validate sprom. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc) -+{ -+ int err = 0; -+ uint i; -+ -+ /* read the sprom */ -+ for (i = 0; i < nwords; i++) -+ buf[i] = R_REG(&sprom[wordoff + i]); -+ -+ if (check_crc) { -+ /* fixup the endianness so crc8 will pass */ -+ htol16_buf(buf, nwords * 2); -+ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) -+ err = 1; -+ /* now correct the endianness of the byte array */ -+ ltoh16_buf(buf, nwords * 2); -+ } -+ -+ return err; -+} -+ -+/* -+* Create variable table from memory. -+* Return 0 on success, nonzero on error. -+*/ -+static int -+initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count) -+{ -+ int c = (int)(end - start); -+ -+ /* do it only when there is more than just the null string */ -+ if (c > 1) { -+ char *vp = MALLOC(osh, c); -+ ASSERT(vp); -+ if (!vp) -+ return BCME_NOMEM; -+ bcopy(start, vp, c); -+ *vars = vp; -+ *count = c; -+ } -+ else { -+ *vars = NULL; -+ *count = 0; -+ } -+ -+ return 0; -+} -+ -+/* -+* Find variables with from flash. 'base' points to the beginning -+* of the table upon enter and to the end of the table upon exit when success. -+* Return 0 on success, nonzero on error. -+*/ -+static int -+initvars_flash(osl_t *osh, char **base, int size, char *devpath) -+{ -+ char *vp = *base; -+ char *flash; -+ int err; -+ char *s; -+ uint l, dl, copy_len; -+ -+ /* allocate memory and read in flash */ -+ if (!(flash = MALLOC(osh, NVRAM_SPACE))) -+ return BCME_NOMEM; -+ if ((err = BCMINIT(nvram_getall)(flash, NVRAM_SPACE))) -+ goto exit; -+ -+ /* grab vars with the prefix in name */ -+ dl = strlen(devpath); -+ for (s = flash; s && *s; s += l + 1) { -+ l = strlen(s); -+ -+ /* skip non-matching variable */ -+ if (strncmp(s, devpath, dl)) -+ continue; -+ -+ /* is there enough room to copy? */ -+ copy_len = l - dl + 1; -+ if (size < (int)copy_len) { -+ err = BCME_BUFTOOSHORT; -+ goto exit; -+ } -+ -+ /* no prefix, just the name=value */ -+ strcpy(vp, &s[dl]); -+ vp += copy_len; -+ size -= copy_len; -+ } -+ -+ /* add null string as terminator */ -+ if (size < 1) { -+ err = BCME_BUFTOOSHORT; -+ goto exit; -+ } -+ *vp++ = '\0'; -+ -+ *base = vp; -+ -+exit: MFREE(osh, flash, NVRAM_SPACE); -+ return err; -+} -+ -+/* -+ * Initialize nonvolatile variable table from flash. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_flash_sb(void *sbh, char **vars, int *count) -+{ -+ osl_t *osh = sb_osh(sbh); -+ char devpath[SB_DEVPATH_BUFSZ]; -+ char *vp, *base; -+ int err; -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ if ((err = sb_devpath(sbh, devpath, sizeof(devpath)))) -+ return err; -+ -+ base = vp = MALLOC(osh, VARS_MAX); -+ ASSERT(vp); -+ if (!vp) -+ return BCME_NOMEM; -+ -+ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath))) -+ goto err; -+ -+ err = initvars_table(osh, base, vp, vars, count); -+ -+err: MFREE(osh, base, VARS_MAX); -+ return err; -+} -+ -+/* -+ * Initialize nonvolatile variable table from sprom. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count) -+{ -+ uint16 w, b[64]; -+ uint8 sromrev; -+ struct ether_addr ea; -+ char eabuf[32]; -+ uint32 w32; -+ int woff, i; -+ char *vp, *base; -+ osl_t *osh = sb_osh(sbh); -+ bool flash = FALSE; -+ char name[SB_DEVPATH_BUFSZ+16], *value; -+ char devpath[SB_DEVPATH_BUFSZ]; -+ int err; -+ -+ /* -+ * Apply CRC over SROM content regardless SROM is present or not, -+ * and use variable sromrev's existance in flash to decide -+ * if we should return an error when CRC fails or read SROM variables -+ * from flash. -+ */ -+ if (sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE)) { -+ if ((err = sb_devpath(sbh, devpath, sizeof(devpath)))) -+ return err; -+ sprintf(name, "%ssromrev", devpath); -+ if (!(value = getvar(NULL, name))) -+ return (-1); -+ sromrev = (uint8)bcm_strtoul(value, NULL, 0); -+ flash = TRUE; -+ } -+ /* srom is good */ -+ else { -+ /* top word of sprom contains version and crc8 */ -+ sromrev = b[63] & 0xff; -+ /* bcm4401 sroms misprogrammed */ -+ if (sromrev == 0x10) -+ sromrev = 1; -+ } -+ -+ /* srom version check */ -+ if (sromrev > 3) -+ return (-2); -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ base = vp = MALLOC(osh, VARS_MAX); -+ ASSERT(vp); -+ if (!vp) -+ return -2; -+ -+ /* read variables from flash */ -+ if (flash) { -+ if ((err = initvars_flash(osh, &vp, VARS_MAX, devpath))) -+ goto err; -+ goto done; -+ } -+ -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; -+ -+ if (sromrev >= 3) { -+ /* New section takes over the 3th hardware function space */ -+ -+ /* Words 22+23 are 11a (mid) ofdm power offsets */ -+ w32 = ((uint32)b[23] << 16) | b[22]; -+ vp += sprintf(vp, "ofdmapo=%d", w32); -+ vp++; -+ -+ /* Words 24+25 are 11a (low) ofdm power offsets */ -+ w32 = ((uint32)b[25] << 16) | b[24]; -+ vp += sprintf(vp, "ofdmalpo=%d", w32); -+ vp++; -+ -+ /* Words 26+27 are 11a (high) ofdm power offsets */ -+ w32 = ((uint32)b[27] << 16) | b[26]; -+ vp += sprintf(vp, "ofdmahpo=%d", w32); -+ vp++; -+ -+ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ -+ w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8); -+ vp += sprintf(vp, "gpiotimerval=%d", w32); -+ -+ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ -+ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) | /* oncount*/ -+ ((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */ -+ vp += sprintf(vp, "gpiotimerval=%d", w32); -+ -+ vp++; -+ } -+ -+ if (sromrev >= 2) { -+ /* New section takes over the 4th hardware function space */ -+ -+ /* Word 29 is max power 11a high/low */ -+ w = b[29]; -+ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Words 30-32 set the 11alow pa settings, -+ * 33-35 are the 11ahigh ones. -+ */ -+ for (i = 0; i < 3; i++) { -+ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); -+ vp++; -+ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); -+ vp++; -+ } -+ w = b[59]; -+ if (w == 0) -+ vp += sprintf(vp, "ccode="); -+ else -+ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); -+ vp++; -+ -+ } -+ -+ /* parameter section of sprom starts at byte offset 72 */ -+ woff = 72/2; -+ -+ /* first 6 bytes are il0macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += 3; -+ bcm_ether_ntoa((uchar*)&ea, eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; -+ -+ /* next 6 bytes are et0macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += 3; -+ bcm_ether_ntoa((uchar*)&ea, eabuf); -+ vp += sprintf(vp, "et0macaddr=%s", eabuf); -+ vp++; -+ -+ /* next 6 bytes are et1macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += 3; -+ bcm_ether_ntoa((uchar*)&ea, eabuf); -+ vp += sprintf(vp, "et1macaddr=%s", eabuf); -+ vp++; -+ -+ /* -+ * Enet phy settings one or two singles or a dual -+ * Bits 4-0 : MII address for enet0 (0x1f for not there) -+ * Bits 9-5 : MII address for enet1 (0x1f for not there) -+ * Bit 14 : Mdio for enet0 -+ * Bit 15 : Mdio for enet1 -+ */ -+ w = b[woff]; -+ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); -+ vp++; -+ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); -+ vp++; -+ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); -+ vp++; -+ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); -+ vp++; -+ -+ /* Word 46 has board rev, antennas 0/1 & Country code/control */ -+ w = b[46]; -+ vp += sprintf(vp, "boardrev=%d", w & 0xff); -+ vp++; -+ -+ if (sromrev > 1) -+ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); -+ else -+ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); -+ vp++; -+ -+ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); -+ vp++; -+ -+ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); -+ vp++; -+ -+ /* Words 47-49 set the (wl) pa settings */ -+ woff = 47; -+ -+ for (i = 0; i < 3; i++) { -+ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); -+ vp++; -+ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); -+ vp++; -+ } -+ -+ /* -+ * Words 50-51 set the customer-configured wl led behavior. -+ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; -+ * LED behavior values defined in wlioctl.h . -+ */ -+ w = b[50]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* gpio0 */ -+ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); -+ vp++; -+ -+ /* gpio1 */ -+ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ w = b[51]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* gpio2 */ -+ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); -+ vp++; -+ -+ /* gpio3 */ -+ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ -+ /* Word 52 is max power 0/1 */ -+ w = b[52]; -+ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Word 56 is idle tssi target 0/1 */ -+ w = b[56]; -+ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ /* Word 57 is boardflags, if not programmed make it zero */ -+ w32 = (uint32)b[57]; -+ if (w32 == 0xffff) w32 = 0; -+ if (sromrev > 1) { -+ /* Word 28 is the high bits of boardflags */ -+ w32 |= (uint32)b[28] << 16; -+ } -+ vp += sprintf(vp, "boardflags=%d", w32); -+ vp++; -+ -+ /* Word 58 is antenna gain 0/1 */ -+ w = b[58]; -+ vp += sprintf(vp, "ag0=%d", w & 0xff); -+ vp++; -+ -+ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); -+ vp++; -+ -+ if (sromrev == 1) { -+ /* set the oem string */ -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ ((b[59] >> 8) & 0xff), (b[59] & 0xff), -+ ((b[60] >> 8) & 0xff), (b[60] & 0xff), -+ ((b[61] >> 8) & 0xff), (b[61] & 0xff), -+ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); -+ vp++; -+ } else if (sromrev == 2) { -+ /* Word 60 OFDM tx power offset from CCK level */ -+ /* OFDM Power Offset - opo */ -+ vp += sprintf(vp, "opo=%d", b[60] & 0xff); -+ vp++; -+ } else { -+ /* Word 60: cck power offsets */ -+ vp += sprintf(vp, "cckpo=%d", b[60]); -+ vp++; -+ -+ /* Words 61+62: 11g ofdm power offsets */ -+ w32 = ((uint32)b[62] << 16) | b[61]; -+ vp += sprintf(vp, "ofdmgpo=%d", w32); -+ vp++; -+ } -+ -+ /* final nullbyte terminator */ -+ *vp++ = '\0'; -+ -+ ASSERT((vp - base) <= VARS_MAX); -+ -+done: err = initvars_table(osh, base, vp, vars, count); -+ -+err: MFREE(osh, base, VARS_MAX); -+ return err; -+} -+ -+/* -+ * Read the cis and call parsecis to initialize the vars. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_cis_pcmcia(void *sbh, osl_t *osh, char **vars, int *count) -+{ -+ uint8 *cis = NULL; -+ int rc; -+ uint data_sz; -+ -+ data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE; -+ -+ if ((cis = MALLOC(osh, data_sz)) == NULL) -+ return (-2); -+ -+ if (sb_pcmciarev(sbh) == 1) { -+ if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) { -+ MFREE(osh, cis, data_sz); -+ return (-1); -+ } -+ /* fix up endianess for 16-bit data vs 8-bit parsing */ -+ ltoh16_buf((uint16 *)cis, data_sz); -+ } else -+ OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz); -+ -+ rc = srom_parsecis(osh, cis, vars, count); -+ -+ MFREE(osh, cis, data_sz); -+ -+ return (rc); -+} -+ -diff -Nur linux-2.4.32/drivers/net/hnd/bcmutils.c linux-2.4.32-brcm/drivers/net/hnd/bcmutils.c ---- linux-2.4.32/drivers/net/hnd/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/bcmutils.c 2005-12-16 23:39:11.288858250 +0100 -@@ -0,0 +1,1081 @@ -+/* -+ * Misc useful OS-independent routines. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#include -+#ifdef BCMDRIVER -+#include -+#include -+#include -+#else -+#include -+#include -+#endif -+#include -+#include -+#include -+ -+#ifdef BCMDRIVER -+/* copy a pkt buffer chain into a buffer */ -+uint -+pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf) -+{ -+ uint n, ret = 0; -+ -+ if (len < 0) -+ len = 4096; /* "infinite" */ -+ -+ /* skip 'offset' bytes */ -+ for (; p && offset; p = PKTNEXT(osh, p)) { -+ if (offset < (uint)PKTLEN(osh, p)) -+ break; -+ offset -= PKTLEN(osh, p); -+ } -+ -+ if (!p) -+ return 0; -+ -+ /* copy the data */ -+ for (; p && len; p = PKTNEXT(osh, p)) { -+ n = MIN((uint)PKTLEN(osh, p) - offset, (uint)len); -+ bcopy(PKTDATA(osh, p) + offset, buf, n); -+ buf += n; -+ len -= n; -+ ret += n; -+ offset = 0; -+ } -+ -+ return ret; -+} -+ -+/* return total length of buffer chain */ -+uint -+pkttotlen(osl_t *osh, void *p) -+{ -+ uint total; -+ -+ total = 0; -+ for (; p; p = PKTNEXT(osh, p)) -+ total += PKTLEN(osh, p); -+ return (total); -+} -+ -+void -+pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]) -+{ -+ q->head = q->tail = NULL; -+ q->maxlen = maxlen; -+ q->len = 0; -+ if (prio_map) { -+ q->priority = TRUE; -+ bcopy(prio_map, q->prio_map, sizeof(q->prio_map)); -+ } -+ else -+ q->priority = FALSE; -+} -+ -+/* should always check pktq_full before calling pktenq */ -+void -+pktenq(struct pktq *q, void *p, bool lifo) -+{ -+ void *next, *prev; -+ -+ /* allow 10 pkts slack */ -+ ASSERT(q->len < (q->maxlen + 10)); -+ -+ /* Queueing chains not allowed */ -+ ASSERT(PKTLINK(p) == NULL); -+ -+ /* Queue is empty */ -+ if (q->tail == NULL) { -+ ASSERT(q->head == NULL); -+ q->head = q->tail = p; -+ } -+ -+ /* Insert at head or tail */ -+ else if (q->priority == FALSE) { -+ /* Insert at head (LIFO) */ -+ if (lifo) { -+ PKTSETLINK(p, q->head); -+ q->head = p; -+ } -+ /* Insert at tail (FIFO) */ -+ else { -+ ASSERT(PKTLINK(q->tail) == NULL); -+ PKTSETLINK(q->tail, p); -+ PKTSETLINK(p, NULL); -+ q->tail = p; -+ } -+ } -+ -+ /* Insert by priority */ -+ else { -+ /* legal priorities 0-7 */ -+ ASSERT(PKTPRIO(p) <= MAXPRIO); -+ -+ ASSERT(q->head); -+ ASSERT(q->tail); -+ /* Shortcut to insertion at tail */ -+ if (_pktq_pri(q, PKTPRIO(p)) < _pktq_pri(q, PKTPRIO(q->tail)) || -+ (!lifo && _pktq_pri(q, PKTPRIO(p)) <= _pktq_pri(q, PKTPRIO(q->tail)))) { -+ prev = q->tail; -+ next = NULL; -+ } -+ /* Insert at head or in the middle */ -+ else { -+ prev = NULL; -+ next = q->head; -+ } -+ /* Walk the queue */ -+ for (; next; prev = next, next = PKTLINK(next)) { -+ /* Priority queue invariant */ -+ ASSERT(!prev || _pktq_pri(q, PKTPRIO(prev)) >= _pktq_pri(q, PKTPRIO(next))); -+ /* Insert at head of string of packets of same priority (LIFO) */ -+ if (lifo) { -+ if (_pktq_pri(q, PKTPRIO(p)) >= _pktq_pri(q, PKTPRIO(next))) -+ break; -+ } -+ /* Insert at tail of string of packets of same priority (FIFO) */ -+ else { -+ if (_pktq_pri(q, PKTPRIO(p)) > _pktq_pri(q, PKTPRIO(next))) -+ break; -+ } -+ } -+ /* Insert at tail */ -+ if (next == NULL) { -+ ASSERT(PKTLINK(q->tail) == NULL); -+ PKTSETLINK(q->tail, p); -+ PKTSETLINK(p, NULL); -+ q->tail = p; -+ } -+ /* Insert in the middle */ -+ else if (prev) { -+ PKTSETLINK(prev, p); -+ PKTSETLINK(p, next); -+ } -+ /* Insert at head */ -+ else { -+ PKTSETLINK(p, q->head); -+ q->head = p; -+ } -+ } -+ -+ /* List invariants after insertion */ -+ ASSERT(q->head); -+ ASSERT(PKTLINK(q->tail) == NULL); -+ -+ q->len++; -+} -+ -+/* dequeue packet at head */ -+void* -+pktdeq(struct pktq *q) -+{ -+ void *p; -+ -+ if ((p = q->head)) { -+ ASSERT(q->tail); -+ q->head = PKTLINK(p); -+ PKTSETLINK(p, NULL); -+ q->len--; -+ if (q->head == NULL) -+ q->tail = NULL; -+ } -+ else { -+ ASSERT(q->tail == NULL); -+ } -+ -+ return (p); -+} -+ -+/* dequeue packet at tail */ -+void* -+pktdeqtail(struct pktq *q) -+{ -+ void *p; -+ void *next, *prev; -+ -+ if (q->head == q->tail) { /* last packet on queue or queue empty */ -+ p = q->head; -+ q->head = q->tail = NULL; -+ q->len = 0; -+ return(p); -+ } -+ -+ /* start walk at head */ -+ prev = NULL; -+ next = q->head; -+ -+ /* Walk the queue to find prev of q->tail */ -+ for (; next; prev = next, next = PKTLINK(next)) { -+ if (next == q->tail) -+ break; -+ } -+ -+ ASSERT(prev); -+ -+ PKTSETLINK(prev, NULL); -+ q->tail = prev; -+ q->len--; -+ p = next; -+ -+ return (p); -+} -+ -+unsigned char bcm_ctype[] = { -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ -+ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ -+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ -+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ -+ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ -+ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ -+ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ -+ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ -+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ -+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ -+}; -+ -+uchar -+bcm_toupper(uchar c) -+{ -+ if (bcm_islower(c)) -+ c -= 'a'-'A'; -+ return (c); -+} -+ -+ulong -+bcm_strtoul(char *cp, char **endp, uint base) -+{ -+ ulong result, value; -+ bool minus; -+ -+ minus = FALSE; -+ -+ while (bcm_isspace(*cp)) -+ cp++; -+ -+ if (cp[0] == '+') -+ cp++; -+ else if (cp[0] == '-') { -+ minus = TRUE; -+ cp++; -+ } -+ -+ if (base == 0) { -+ if (cp[0] == '0') { -+ if ((cp[1] == 'x') || (cp[1] == 'X')) { -+ base = 16; -+ cp = &cp[2]; -+ } else { -+ base = 8; -+ cp = &cp[1]; -+ } -+ } else -+ base = 10; -+ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { -+ cp = &cp[2]; -+ } -+ -+ result = 0; -+ -+ while (bcm_isxdigit(*cp) && -+ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { -+ result = result*base + value; -+ cp++; -+ } -+ -+ if (minus) -+ result = (ulong)(result * -1); -+ -+ if (endp) -+ *endp = (char *)cp; -+ -+ return (result); -+} -+ -+uint -+bcm_atoi(char *s) -+{ -+ uint n; -+ -+ n = 0; -+ -+ while (bcm_isdigit(*s)) -+ n = (n * 10) + *s++ - '0'; -+ return (n); -+} -+ -+/* return pointer to location of substring 'needle' in 'haystack' */ -+char* -+bcmstrstr(char *haystack, char *needle) -+{ -+ int len, nlen; -+ int i; -+ -+ if ((haystack == NULL) || (needle == NULL)) -+ return (haystack); -+ -+ nlen = strlen(needle); -+ len = strlen(haystack) - nlen + 1; -+ -+ for (i = 0; i < len; i++) -+ if (bcmp(needle, &haystack[i], nlen) == 0) -+ return (&haystack[i]); -+ return (NULL); -+} -+ -+char* -+bcmstrcat(char *dest, const char *src) -+{ -+ strcpy(&dest[strlen(dest)], src); -+ return (dest); -+} -+ -+#if defined(CONFIG_USBRNDIS_RETAIL) || defined(NDIS_MINIPORT_DRIVER) -+/* registry routine buffer preparation utility functions: -+ * parameter order is like strncpy, but returns count -+ * of bytes copied. Minimum bytes copied is null char(1)/wchar(2) -+ */ -+ulong -+wchar2ascii( -+ char *abuf, -+ ushort *wbuf, -+ ushort wbuflen, -+ ulong abuflen -+) -+{ -+ ulong copyct = 1; -+ ushort i; -+ -+ if (abuflen == 0) -+ return 0; -+ -+ /* wbuflen is in bytes */ -+ wbuflen /= sizeof(ushort); -+ -+ for (i = 0; i < wbuflen; ++i) { -+ if (--abuflen == 0) -+ break; -+ *abuf++ = (char) *wbuf++; -+ ++copyct; -+ } -+ *abuf = '\0'; -+ -+ return copyct; -+} -+#endif -+ -+char* -+bcm_ether_ntoa(char *ea, char *buf) -+{ -+ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", -+ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, -+ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); -+ return (buf); -+} -+ -+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ -+int -+bcm_ether_atoe(char *p, char *ea) -+{ -+ int i = 0; -+ -+ for (;;) { -+ ea[i++] = (char) bcm_strtoul(p, &p, 16); -+ if (!*p++ || i == 6) -+ break; -+ } -+ -+ return (i == 6); -+} -+ -+void -+bcm_mdelay(uint ms) -+{ -+ uint i; -+ -+ for (i = 0; i < ms; i++) { -+ OSL_DELAY(1000); -+ } -+} -+ -+/* -+ * Search the name=value vars for a specific one and return its value. -+ * Returns NULL if not found. -+ */ -+char* -+getvar(char *vars, char *name) -+{ -+ char *s; -+ int len; -+ -+ len = strlen(name); -+ -+ /* first look in vars[] */ -+ for (s = vars; s && *s; ) { -+ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) -+ return (&s[len+1]); -+ -+ while (*s++) -+ ; -+ } -+ -+ /* then query nvram */ -+ return (BCMINIT(nvram_get)(name)); -+} -+ -+/* -+ * Search the vars for a specific one and return its value as -+ * an integer. Returns 0 if not found. -+ */ -+int -+getintvar(char *vars, char *name) -+{ -+ char *val; -+ -+ if ((val = getvar(vars, name)) == NULL) -+ return (0); -+ -+ return (bcm_strtoul(val, NULL, 0)); -+} -+ -+ -+/* Search for token in comma separated token-string */ -+static int -+findmatch(char *string, char *name) -+{ -+ uint len; -+ char *c; -+ -+ len = strlen(name); -+ while ((c = strchr(string, ',')) != NULL) { -+ if (len == (uint)(c - string) && !strncmp(string, name, len)) -+ return 1; -+ string = c + 1; -+ } -+ -+ return (!strcmp(string, name)); -+} -+ -+/* Return gpio pin number assigned to the named pin */ -+/* -+* Variable should be in format: -+* -+* gpio=pin_name,pin_name -+* -+* This format allows multiple features to share the gpio with mutual -+* understanding. -+* -+* 'def_pin' is returned if a specific gpio is not defined for the requested functionality -+* and if def_pin is not used by others. -+*/ -+uint -+getgpiopin(char *vars, char *pin_name, uint def_pin) -+{ -+ char name[] = "gpioXXXX"; -+ char *val; -+ uint pin; -+ -+ /* Go thru all possibilities till a match in pin name */ -+ for (pin = 0; pin < GPIO_NUMPINS; pin ++) { -+ sprintf(name, "gpio%d", pin); -+ val = getvar(vars, name); -+ if (val && findmatch(val, pin_name)) -+ return pin; -+ } -+ -+ if (def_pin != GPIO_PIN_NOTDEFINED) { -+ /* make sure the default pin is not used by someone else */ -+ sprintf(name, "gpio%d", def_pin); -+ if (getvar(vars, name)) { -+ def_pin = GPIO_PIN_NOTDEFINED; -+ } -+ } -+ -+ return def_pin; -+} -+ -+ -+static char bcm_undeferrstr[BCME_STRLEN]; -+ -+static const char *bcmerrorstrtable[] = \ -+{ "OK", /* 0 */ -+ "Undefined error", /* BCME_ERROR */ -+ "Bad Argument", /* BCME_BADARG*/ -+ "Bad Option", /* BCME_BADOPTION*/ -+ "Not up", /* BCME_NOTUP */ -+ "Not down", /* BCME_NOTDOWN */ -+ "Not AP", /* BCME_NOTAP */ -+ "Not STA", /* BCME_NOTSTA */ -+ "Bad Key Index", /* BCME_BADKEYIDX */ -+ "Radio Off", /* BCME_RADIOOFF */ -+ "Not band locked", /* BCME_NOTBANDLOCKED */ -+ "No clock", /* BCME_NOCLK */ -+ "Bad Rate valueset", /* BCME_BADRATESET */ -+ "Bad Band", /* BCME_BADBAND */ -+ "Buffer too short", /* BCME_BUFTOOSHORT */ -+ "Buffer too length", /* BCME_BUFTOOLONG */ -+ "Busy", /* BCME_BUSY */ -+ "Not Associated", /* BCME_NOTASSOCIATED */ -+ "Bad SSID len", /* BCME_BADSSIDLEN */ -+ "Out of Range Channel", /* BCME_OUTOFRANGECHAN */ -+ "Bad Channel", /* BCME_BADCHAN */ -+ "Bad Address", /* BCME_BADADDR */ -+ "Not Enough Resources", /* BCME_NORESOURCE */ -+ "Unsupported", /* BCME_UNSUPPORTED */ -+ "Bad length", /* BCME_BADLENGTH */ -+ "Not Ready", /* BCME_NOTREADY */ -+ "Not Permitted", /* BCME_EPERM */ -+ "No Memory", /* BCME_NOMEM */ -+ "Associated", /* BCME_ASSOCIATED */ -+ "Not In Range", /* BCME_RANGE */ -+ "Not Found" /* BCME_NOTFOUND */ -+ }; -+ -+/* Convert the Error codes into related Error strings */ -+const char * -+bcmerrorstr(int bcmerror) -+{ -+ int abs_bcmerror; -+ -+ abs_bcmerror = ABS(bcmerror); -+ -+ /* check if someone added a bcmerror code but forgot to add errorstring */ -+ ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(bcmerrorstrtable) - 1)); -+ if ( (bcmerror > 0) || (abs_bcmerror > ABS(BCME_LAST))) { -+ sprintf(bcm_undeferrstr, "undefined Error %d", bcmerror); -+ return bcm_undeferrstr; -+ } -+ -+ ASSERT((strlen((char*)bcmerrorstrtable[abs_bcmerror])) < BCME_STRLEN); -+ -+ return bcmerrorstrtable[abs_bcmerror]; -+} -+#endif /* #ifdef BCMDRIVER */ -+ -+ -+/******************************************************************************* -+ * crc8 -+ * -+ * Computes a crc8 over the input data using the polynomial: -+ * -+ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 -+ * -+ * The caller provides the initial value (either CRC8_INIT_VALUE -+ * or the previous returned value) to allow for processing of -+ * discontiguous blocks of data. When generating the CRC the -+ * caller is responsible for complementing the final return value -+ * and inserting it into the byte stream. When checking, a final -+ * return value of CRC8_GOOD_VALUE indicates a valid CRC. -+ * -+ * Reference: Dallas Semiconductor Application Note 27 -+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", -+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., -+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt -+ * -+ ******************************************************************************/ -+ -+static uint8 crc8_table[256] = { -+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, -+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, -+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, -+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, -+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, -+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, -+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, -+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, -+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, -+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, -+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, -+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, -+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, -+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, -+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, -+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, -+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, -+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, -+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, -+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, -+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, -+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, -+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, -+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, -+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, -+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, -+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, -+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, -+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, -+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, -+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, -+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F -+}; -+ -+#define CRC_INNER_LOOP(n, c, x) \ -+ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] -+ -+uint8 -+hndcrc8( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ -+) -+{ -+ /* hard code the crc loop instead of using CRC_INNER_LOOP macro -+ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ -+ while (nbytes-- > 0) -+ crc = crc8_table[(crc ^ *pdata++) & 0xff]; -+ -+ return crc; -+} -+ -+/******************************************************************************* -+ * crc16 -+ * -+ * Computes a crc16 over the input data using the polynomial: -+ * -+ * x^16 + x^12 +x^5 + 1 -+ * -+ * The caller provides the initial value (either CRC16_INIT_VALUE -+ * or the previous returned value) to allow for processing of -+ * discontiguous blocks of data. When generating the CRC the -+ * caller is responsible for complementing the final return value -+ * and inserting it into the byte stream. When checking, a final -+ * return value of CRC16_GOOD_VALUE indicates a valid CRC. -+ * -+ * Reference: Dallas Semiconductor Application Note 27 -+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", -+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., -+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt -+ * -+ ******************************************************************************/ -+ -+static uint16 crc16_table[256] = { -+ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF, -+ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7, -+ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E, -+ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876, -+ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD, -+ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5, -+ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C, -+ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974, -+ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB, -+ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3, -+ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A, -+ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72, -+ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9, -+ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1, -+ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738, -+ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70, -+ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7, -+ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF, -+ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036, -+ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E, -+ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5, -+ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD, -+ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134, -+ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C, -+ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3, -+ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB, -+ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232, -+ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A, -+ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1, -+ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9, -+ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330, -+ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78 -+}; -+ -+uint16 -+hndcrc16( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint16 crc /* either CRC16_INIT_VALUE or previous return value */ -+) -+{ -+ while (nbytes-- > 0) -+ CRC_INNER_LOOP(16, crc, *pdata++); -+ return crc; -+} -+ -+static uint32 crc32_table[256] = { -+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, -+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, -+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, -+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, -+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, -+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, -+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, -+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, -+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, -+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, -+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, -+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, -+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, -+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, -+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, -+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, -+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, -+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, -+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, -+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, -+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, -+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, -+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, -+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, -+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, -+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, -+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, -+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, -+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, -+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, -+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, -+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, -+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, -+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, -+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, -+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, -+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, -+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, -+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, -+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, -+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, -+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, -+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, -+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, -+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, -+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, -+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, -+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, -+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, -+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, -+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, -+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, -+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, -+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, -+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, -+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, -+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, -+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, -+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, -+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, -+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, -+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, -+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, -+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -+}; -+ -+uint32 -+hndcrc32( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint32 crc /* either CRC32_INIT_VALUE or previous return value */ -+) -+{ -+ uint8 *pend; -+#ifdef __mips__ -+ uint8 tmp[4]; -+ ulong *tptr = (ulong *)tmp; -+ -+ /* in case the beginning of the buffer isn't aligned */ -+ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc); -+ nbytes -= (pend - pdata); -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+ -+ /* handle bulk of data as 32-bit words */ -+ pend = pdata + (nbytes & 0xfffffffc); -+ while (pdata < pend) { -+ tptr = *((ulong *) pdata); -+ *((ulong *) pdata) += 1; -+ CRC_INNER_LOOP(32, crc, tmp[0]); -+ CRC_INNER_LOOP(32, crc, tmp[1]); -+ CRC_INNER_LOOP(32, crc, tmp[2]); -+ CRC_INNER_LOOP(32, crc, tmp[3]); -+ } -+ -+ /* 1-3 bytes at end of buffer */ -+ pend = pdata + (nbytes & 0x03); -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+#else -+ pend = pdata + nbytes; -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+#endif -+ -+ return crc; -+} -+ -+#ifdef notdef -+#define CLEN 1499 -+#define CBUFSIZ (CLEN+4) -+#define CNBUFS 5 -+ -+void testcrc32(void) -+{ -+ uint j,k,l; -+ uint8 *buf; -+ uint len[CNBUFS]; -+ uint32 crcr; -+ uint32 crc32tv[CNBUFS] = -+ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110}; -+ -+ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL); -+ -+ /* step through all possible alignments */ -+ for (l=0;l<=4;l++) { -+ for (j=0; jlen; -+ elt = (bcm_tlv_t*)(elt->data + len); -+ *buflen -= (2 + len); -+ -+ /* validate next elt */ -+ if (!bcm_valid_tlv(elt, *buflen)) -+ return NULL; -+ -+ return elt; -+} -+ -+/* -+ * Traverse a string of 1-byte tag/1-byte length/variable-length value -+ * triples, returning a pointer to the substring whose first element -+ * matches tag -+ */ -+bcm_tlv_t * -+bcm_parse_tlvs(void *buf, int buflen, uint key) -+{ -+ bcm_tlv_t *elt; -+ int totlen; -+ -+ elt = (bcm_tlv_t*)buf; -+ totlen = buflen; -+ -+ /* find tagged parameter */ -+ while (totlen >= 2) { -+ int len = elt->len; -+ -+ /* validate remaining totlen */ -+ if ((elt->id == key) && (totlen >= (len + 2))) -+ return (elt); -+ -+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); -+ totlen -= (len + 2); -+ } -+ -+ return NULL; -+} -+ -+/* -+ * Traverse a string of 1-byte tag/1-byte length/variable-length value -+ * triples, returning a pointer to the substring whose first element -+ * matches tag. Stop parsing when we see an element whose ID is greater -+ * than the target key. -+ */ -+bcm_tlv_t * -+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key) -+{ -+ bcm_tlv_t *elt; -+ int totlen; -+ -+ elt = (bcm_tlv_t*)buf; -+ totlen = buflen; -+ -+ /* find tagged parameter */ -+ while (totlen >= 2) { -+ uint id = elt->id; -+ int len = elt->len; -+ -+ /* Punt if we start seeing IDs > than target key */ -+ if (id > key) -+ return(NULL); -+ -+ /* validate remaining totlen */ -+ if ((id == key) && (totlen >= (len + 2))) -+ return (elt); -+ -+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); -+ totlen -= (len + 2); -+ } -+ return NULL; -+} -+/* routine to dump fields in a fileddesc structure */ -+ -+uint -+bcmdumpfields(readreg_rtn read_rtn, void *arg0, void *arg1, struct fielddesc *fielddesc_array, char *buf, uint32 bufsize) -+{ -+ uint filled_len; -+ uint len; -+ struct fielddesc *cur_ptr; -+ -+ filled_len = 0; -+ cur_ptr = fielddesc_array; -+ -+ while (bufsize > (filled_len + 64)) { -+ if (cur_ptr->nameandfmt == NULL) -+ break; -+ len = sprintf(buf, cur_ptr->nameandfmt, read_rtn(arg0, arg1, cur_ptr->offset)); -+ buf += len; -+ filled_len += len; -+ cur_ptr++; -+ } -+ return filled_len; -+} -+ -+uint -+bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint buflen) ++static int ++dev_nvram_release(struct inode *inode, struct file * file) +{ -+ uint len; -+ -+ len = strlen(name) + 1; -+ -+ if ((len + datalen) > buflen) -+ return 0; -+ -+ strcpy(buf, name); -+ -+ /* append data onto the end of the name string */ -+ memcpy(&buf[len], data, datalen); -+ len += datalen; -+ -+ return len; ++ MOD_DEC_USE_COUNT; ++ return 0; +} + -+/* Quarter dBm units to mW -+ * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153 -+ * Table is offset so the last entry is largest mW value that fits in -+ * a uint16. -+ */ -+ -+#define QDBM_OFFSET 153 -+#define QDBM_TABLE_LEN 40 -+ -+/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET. -+ * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2 -+ */ -+#define QDBM_TABLE_LOW_BOUND 6493 -+ -+/* Largest mW value that will round down to the last table entry, -+ * QDBM_OFFSET + QDBM_TABLE_LEN-1. -+ * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) + mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2. -+ */ -+#define QDBM_TABLE_HIGH_BOUND 64938 -+ -+static const uint16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = { -+/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */ -+/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000, -+/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849, -+/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119, -+/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811, -+/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096 ++static struct file_operations dev_nvram_fops = { ++ owner: THIS_MODULE, ++ open: dev_nvram_open, ++ release: dev_nvram_release, ++ read: dev_nvram_read, ++ write: dev_nvram_write, ++ ioctl: dev_nvram_ioctl, ++ mmap: dev_nvram_mmap, +}; + -+uint16 -+bcm_qdbm_to_mw(uint8 qdbm) -+{ -+ uint factor = 1; -+ int idx = qdbm - QDBM_OFFSET; -+ -+ if (idx > QDBM_TABLE_LEN) { -+ /* clamp to max uint16 mW value */ -+ return 0xFFFF; -+ } -+ -+ /* scale the qdBm index up to the range of the table 0-40 -+ * where an offset of 40 qdBm equals a factor of 10 mW. -+ */ -+ while (idx < 0) { -+ idx += 40; -+ factor *= 10; -+ } -+ -+ /* return the mW value scaled down to the correct factor of 10, -+ * adding in factor/2 to get proper rounding. */ -+ return ((nqdBm_to_mW_map[idx] + factor/2) / factor); -+} -+ -+uint8 -+bcm_mw_to_qdbm(uint16 mw) -+{ -+ uint8 qdbm; -+ int offset; -+ uint mw_uint = mw; -+ uint boundary; -+ -+ /* handle boundary case */ -+ if (mw_uint <= 1) -+ return 0; -+ -+ offset = QDBM_OFFSET; -+ -+ /* move mw into the range of the table */ -+ while (mw_uint < QDBM_TABLE_LOW_BOUND) { -+ mw_uint *= 10; -+ offset -= 40; -+ } -+ -+ for (qdbm = 0; qdbm < QDBM_TABLE_LEN-1; qdbm++) { -+ boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm+1] - nqdBm_to_mW_map[qdbm])/2; -+ if (mw_uint < boundary) break; -+ } -+ -+ qdbm += (uint8)offset; -+ -+ return(qdbm); -+} -diff -Nur linux-2.4.32/drivers/net/hnd/hnddma.c linux-2.4.32-brcm/drivers/net/hnd/hnddma.c ---- linux-2.4.32/drivers/net/hnd/hnddma.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/hnddma.c 2005-12-16 23:39:11.288858250 +0100 -@@ -0,0 +1,1527 @@ -+/* -+ * Generic Broadcom Home Networking Division (HND) DMA module. -+ * This supports the following chips: BCM42xx, 44xx, 47xx . -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct dma_info; /* forward declaration */ -+#define di_t struct dma_info -+ -+#include -+#include -+ -+/* debug/trace */ -+#define DMA_ERROR(args) -+#define DMA_TRACE(args) -+ -+/* default dma message level (if input msg_level pointer is null in dma_attach()) */ -+static uint dma_msg_level = -+ 0; -+ -+#define MAXNAMEL 8 -+ -+/* dma engine software state */ -+typedef struct dma_info { -+ hnddma_t hnddma; /* exported structure */ -+ uint *msg_level; /* message level pointer */ -+ char name[MAXNAMEL]; /* callers name for diag msgs */ -+ -+ void *osh; /* os handle */ -+ sb_t *sbh; /* sb handle */ -+ -+ bool dma64; /* dma64 enabled */ -+ bool addrext; /* this dma engine supports DmaExtendedAddrChanges */ -+ -+ dma32regs_t *d32txregs; /* 32 bits dma tx engine registers */ -+ dma32regs_t *d32rxregs; /* 32 bits dma rx engine registers */ -+ dma64regs_t *d64txregs; /* 64 bits dma tx engine registers */ -+ dma64regs_t *d64rxregs; /* 64 bits dma rx engine registers */ -+ -+ uint32 dma64align; /* either 8k or 4k depends on number of dd */ -+ dma32dd_t *txd32; /* pointer to dma32 tx descriptor ring */ -+ dma64dd_t *txd64; /* pointer to dma64 tx descriptor ring */ -+ uint ntxd; /* # tx descriptors tunable */ -+ uint txin; /* index of next descriptor to reclaim */ -+ uint txout; /* index of next descriptor to post */ -+ uint txavail; /* # free tx descriptors */ -+ void **txp; /* pointer to parallel array of pointers to packets */ -+ ulong txdpa; /* physical address of descriptor ring */ -+ uint txdalign; /* #bytes added to alloc'd mem to align txd */ -+ uint txdalloc; /* #bytes allocated for the ring */ -+ -+ dma32dd_t *rxd32; /* pointer to dma32 rx descriptor ring */ -+ dma64dd_t *rxd64; /* pointer to dma64 rx descriptor ring */ -+ uint nrxd; /* # rx descriptors tunable */ -+ uint rxin; /* index of next descriptor to reclaim */ -+ uint rxout; /* index of next descriptor to post */ -+ void **rxp; /* pointer to parallel array of pointers to packets */ -+ ulong rxdpa; /* physical address of descriptor ring */ -+ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */ -+ uint rxdalloc; /* #bytes allocated for the ring */ -+ -+ /* tunables */ -+ uint rxbufsize; /* rx buffer size in bytes */ -+ uint nrxpost; /* # rx buffers to keep posted */ -+ uint rxoffset; /* rxcontrol offset */ -+ uint ddoffsetlow; /* add to get dma address of descriptor ring, low 32 bits */ -+ uint ddoffsethigh; /* add to get dma address of descriptor ring, high 32 bits */ -+ uint dataoffsetlow; /* add to get dma address of data buffer, low 32 bits */ -+ uint dataoffsethigh; /* add to get dma address of data buffer, high 32 bits */ -+} dma_info_t; -+ -+#ifdef BCMDMA64 -+#define DMA64_ENAB(di) ((di)->dma64) -+#else -+#define DMA64_ENAB(di) (0) -+#endif -+ -+/* descriptor bumping macros */ -+#define XXD(x, n) ((x) & ((n) - 1)) -+#define TXD(x) XXD((x), di->ntxd) -+#define RXD(x) XXD((x), di->nrxd) -+#define NEXTTXD(i) TXD(i + 1) -+#define PREVTXD(i) TXD(i - 1) -+#define NEXTRXD(i) RXD(i + 1) -+#define NTXDACTIVE(h, t) TXD(t - h) -+#define NRXDACTIVE(h, t) RXD(t - h) -+ -+/* macros to convert between byte offsets and indexes */ -+#define B2I(bytes, type) ((bytes) / sizeof(type)) -+#define I2B(index, type) ((index) * sizeof(type)) -+ -+#define PCI32ADDR_HIGH 0xc0000000 /* address[31:30] */ -+#define PCI32ADDR_HIGH_SHIFT 30 -+ -+ -+/* prototypes */ -+static bool dma_isaddrext(dma_info_t *di); -+static bool dma_alloc(dma_info_t *di, uint direction); -+ -+static bool dma32_alloc(dma_info_t *di, uint direction); -+static void dma32_txreset(dma_info_t *di); -+static void dma32_rxreset(dma_info_t *di); -+static bool dma32_txsuspendedidle(dma_info_t *di); -+static int dma32_txfast(dma_info_t *di, void *p0, uint32 coreflags); -+static void* dma32_getnexttxp(dma_info_t *di, bool forceall); -+static void* dma32_getnextrxp(dma_info_t *di, bool forceall); -+static void dma32_txrotate(di_t *di); -+ -+/* prototype or stubs */ -+#ifdef BCMDMA64 -+static bool dma64_alloc(dma_info_t *di, uint direction); -+static void dma64_txreset(dma_info_t *di); -+static void dma64_rxreset(dma_info_t *di); -+static bool dma64_txsuspendedidle(dma_info_t *di); -+static int dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags); -+static void* dma64_getnexttxp(dma_info_t *di, bool forceall); -+static void* dma64_getnextrxp(dma_info_t *di, bool forceall); -+static void dma64_txrotate(di_t *di); -+#else -+static bool dma64_alloc(dma_info_t *di, uint direction) { return TRUE; } -+static void dma64_txreset(dma_info_t *di) {} -+static void dma64_rxreset(dma_info_t *di) {} -+static bool dma64_txsuspendedidle(dma_info_t *di) { return TRUE;} -+static int dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags) { return 0; } -+static void* dma64_getnexttxp(dma_info_t *di, bool forceall) { return NULL; } -+static void* dma64_getnextrxp(dma_info_t *di, bool forceall) { return NULL; } -+static void dma64_txrotate(di_t *di) { return; } -+#endif -+ -+/* old dmaregs struct for compatibility */ -+typedef volatile struct { -+ /* transmit channel */ -+ uint32 xmtcontrol; /* enable, et al */ -+ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */ -+ uint32 xmtptr; /* last descriptor posted to chip */ -+ uint32 xmtstatus; /* current active descriptor, et al */ -+ -+ /* receive channel */ -+ uint32 rcvcontrol; /* enable, et al */ -+ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */ -+ uint32 rcvptr; /* last descriptor posted to chip */ -+ uint32 rcvstatus; /* current active descriptor, et al */ -+} dmaregs_t; -+ -+typedef struct { -+ uint ddoffset; -+ uint dataoffset; -+} compat_data; -+ -+static compat_data *ugly_hack = NULL; -+ -+void* -+dma_attold(void *drv, void *osh, char *name, dmaregs_t *regs, uint ntxd, uint nrxd, -+ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level) -+{ -+ dma32regs_t *dtx = regs; -+ dma32regs_t *drx = dtx + 1; -+ -+ ugly_hack = kmalloc(sizeof(ugly_hack), GFP_KERNEL); -+ ugly_hack->ddoffset = ddoffset; -+ ugly_hack->dataoffset = dataoffset; -+ dma_attach((osl_t *) osh, name, NULL, dtx, drx, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, msg_level); -+ ugly_hack = NULL; -+} -+ -+ -+void* -+dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx, -+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level) -+{ -+ dma_info_t *di; -+ uint size; -+ -+ /* allocate private info structure */ -+ if ((di = MALLOC(osh, sizeof (dma_info_t))) == NULL) { -+ return (NULL); -+ } -+ bzero((char*)di, sizeof (dma_info_t)); -+ -+ di->msg_level = msg_level ? msg_level : &dma_msg_level; -+ -+ if (sbh != NULL) -+ di->dma64 = ((sb_coreflagshi(sbh, 0, 0) & SBTMH_DMA64) == SBTMH_DMA64); -+ -+#ifndef BCMDMA64 -+ if (di->dma64) { -+ DMA_ERROR(("dma_attach: driver doesn't have the capability to support 64 bits DMA\n")); -+ goto fail; -+ } -+#endif -+ -+ /* check arguments */ -+ ASSERT(ISPOWEROF2(ntxd)); -+ ASSERT(ISPOWEROF2(nrxd)); -+ if (nrxd == 0) -+ ASSERT(dmaregsrx == NULL); -+ if (ntxd == 0) -+ ASSERT(dmaregstx == NULL); -+ -+ -+ /* init dma reg pointer */ -+ if (di->dma64) { -+ ASSERT(ntxd <= D64MAXDD); -+ ASSERT(nrxd <= D64MAXDD); -+ di->d64txregs = (dma64regs_t *)dmaregstx; -+ di->d64rxregs = (dma64regs_t *)dmaregsrx; -+ -+ di->dma64align = D64RINGALIGN; -+ if ((ntxd < D64MAXDD / 2) && (nrxd < D64MAXDD / 2)) { -+ /* for smaller dd table, HW relax the alignment requirement */ -+ di->dma64align = D64RINGALIGN / 2; -+ } -+ } else { -+ ASSERT(ntxd <= D32MAXDD); -+ ASSERT(nrxd <= D32MAXDD); -+ di->d32txregs = (dma32regs_t *)dmaregstx; -+ di->d32rxregs = (dma32regs_t *)dmaregsrx; -+ } -+ -+ -+ /* make a private copy of our callers name */ -+ strncpy(di->name, name, MAXNAMEL); -+ di->name[MAXNAMEL-1] = '\0'; -+ -+ di->osh = osh; -+ di->sbh = sbh; -+ -+ /* save tunables */ -+ di->ntxd = ntxd; -+ di->nrxd = nrxd; -+ di->rxbufsize = rxbufsize; -+ di->nrxpost = nrxpost; -+ di->rxoffset = rxoffset; -+ -+ /* -+ * figure out the DMA physical address offset for dd and data -+ * for old chips w/o sb, use zero -+ * for new chips w sb, -+ * PCI/PCIE: they map silicon backplace address to zero based memory, need offset -+ * Other bus: use zero -+ * SB_BUS BIGENDIAN kludge: use sdram swapped region for data buffer, not descriptor -+ */ -+ di->ddoffsetlow = 0; -+ di->dataoffsetlow = 0; -+ if (ugly_hack != NULL) { -+ di->ddoffsetlow = ugly_hack->ddoffset; -+ di->dataoffsetlow = ugly_hack->dataoffset; -+ di->ddoffsethigh = 0; -+ di->dataoffsethigh = 0; -+ } else if (sbh != NULL) { -+ if (sbh->bustype == PCI_BUS) { /* for pci bus, add offset */ -+ if ((sbh->buscoretype == SB_PCIE) && di->dma64){ -+ di->ddoffsetlow = 0; -+ di->ddoffsethigh = SB_PCIE_DMA_H32; -+ } else { -+ di->ddoffsetlow = SB_PCI_DMA; -+ di->ddoffsethigh = 0; -+ } -+ di->dataoffsetlow = di->ddoffsetlow; -+ di->dataoffsethigh = di->ddoffsethigh; -+ } -+#if defined(__mips__) && defined(IL_BIGENDIAN) -+ /* use sdram swapped region for data buffers but not dma descriptors */ -+ di->dataoffsetlow = di->dataoffsetlow + SB_SDRAM_SWAPPED; -+#endif -+ } -+ -+ di->addrext = ((ugly_hack == NULL) ? dma_isaddrext(di) : 0); -+ -+ DMA_TRACE(("%s: dma_attach: osh %p ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", -+ name, osh, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, di->ddoffsetlow, di->dataoffsetlow)); -+ -+ /* allocate tx packet pointer vector */ -+ if (ntxd) { -+ size = ntxd * sizeof (void*); -+ if ((di->txp = MALLOC(osh, size)) == NULL) { -+ DMA_ERROR(("%s: dma_attach: out of tx memory, malloced %d bytes\n", di->name, MALLOCED(osh))); -+ goto fail; -+ } -+ bzero((char*)di->txp, size); -+ } -+ -+ /* allocate rx packet pointer vector */ -+ if (nrxd) { -+ size = nrxd * sizeof (void*); -+ if ((di->rxp = MALLOC(osh, size)) == NULL) { -+ DMA_ERROR(("%s: dma_attach: out of rx memory, malloced %d bytes\n", di->name, MALLOCED(osh))); -+ goto fail; -+ } -+ bzero((char*)di->rxp, size); -+ } -+ -+ /* allocate transmit descriptor ring, only need ntxd descriptors but it must be aligned */ -+ if (ntxd) { -+ if (!dma_alloc(di, DMA_TX)) -+ goto fail; -+ } -+ -+ /* allocate receive descriptor ring, only need nrxd descriptors but it must be aligned */ -+ if (nrxd) { -+ if (!dma_alloc(di, DMA_RX)) -+ goto fail; -+ } -+ -+ if ((di->ddoffsetlow == SB_PCI_DMA) && (di->txdpa > SB_PCI_DMA_SZ) && !di->addrext) { -+ DMA_ERROR(("%s: dma_attach: txdpa 0x%lx: addrext not supported\n", di->name, di->txdpa)); -+ goto fail; -+ } -+ if ((di->ddoffsetlow == SB_PCI_DMA) && (di->rxdpa > SB_PCI_DMA_SZ) && !di->addrext) { -+ DMA_ERROR(("%s: dma_attach: rxdpa 0x%lx: addrext not supported\n", di->name, di->rxdpa)); -+ goto fail; -+ } -+ -+ return ((void*)di); -+ -+fail: -+ dma_detach((void*)di); -+ return (NULL); -+} -+ -+static bool -+dma_alloc(dma_info_t *di, uint direction) -+{ -+ if (DMA64_ENAB(di)) { -+ return dma64_alloc(di, direction); -+ } else { -+ return dma32_alloc(di, direction); -+ } -+} -+ -+/* may be called with core in reset */ -+void -+dma_detach(dma_info_t *di) -+{ -+ if (di == NULL) -+ return; -+ -+ DMA_TRACE(("%s: dma_detach\n", di->name)); -+ -+ /* shouldn't be here if descriptors are unreclaimed */ -+ ASSERT(di->txin == di->txout); -+ ASSERT(di->rxin == di->rxout); -+ -+ /* free dma descriptor rings */ -+ if (di->txd32) -+ DMA_FREE_CONSISTENT(di->osh, ((int8*)di->txd32 - di->txdalign), di->txdalloc, (di->txdpa - di->txdalign)); -+ if (di->rxd32) -+ DMA_FREE_CONSISTENT(di->osh, ((int8*)di->rxd32 - di->rxdalign), di->rxdalloc, (di->rxdpa - di->rxdalign)); -+ -+ /* free packet pointer vectors */ -+ if (di->txp) -+ MFREE(di->osh, (void*)di->txp, (di->ntxd * sizeof (void*))); -+ if (di->rxp) -+ MFREE(di->osh, (void*)di->rxp, (di->nrxd * sizeof (void*))); -+ -+ /* free our private info structure */ -+ MFREE(di->osh, (void*)di, sizeof (dma_info_t)); -+} -+ -+/* return TRUE if this dma engine supports DmaExtendedAddrChanges, otherwise FALSE */ -+static bool -+dma_isaddrext(dma_info_t *di) ++static void ++dev_nvram_exit(void) +{ -+ uint32 w; ++ int order = 0; ++ struct page *page, *end; + -+ if (DMA64_ENAB(di)) { -+ OR_REG(&di->d64txregs->control, D64_XC_AE); -+ w = R_REG(&di->d32txregs->control); -+ AND_REG(&di->d32txregs->control, ~D64_XC_AE); -+ return ((w & XC_AE) == D64_XC_AE); -+ } else { -+ OR_REG(&di->d32txregs->control, XC_AE); -+ w = R_REG(&di->d32txregs->control); -+ AND_REG(&di->d32txregs->control, ~XC_AE); -+ return ((w & XC_AE) == XC_AE); -+ } -+} ++ if (nvram_handle) ++ devfs_unregister(nvram_handle); + -+void -+dma_txreset(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txreset\n", di->name)); ++ if (nvram_major >= 0) ++ devfs_unregister_chrdev(nvram_major, "nvram"); + -+ if (DMA64_ENAB(di)) -+ dma64_txreset(di); -+ else -+ dma32_txreset(di); -+} ++ if (nvram_mtd) ++ put_mtd_device(nvram_mtd); + -+void -+dma_rxreset(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_rxreset\n", di->name)); ++ while ((PAGE_SIZE << order) < NVRAM_SPACE) ++ order++; ++ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); ++ for (page = virt_to_page(nvram_buf); page <= end; page++) ++ mem_map_unreserve(page); + -+ if (DMA64_ENAB(di)) -+ dma64_rxreset(di); -+ else -+ dma32_rxreset(di); ++ _nvram_exit(); +} + -+/* initialize descriptor table base address */ -+static void -+dma_ddtable_init(dma_info_t *di, uint direction, ulong pa) ++static int __init ++dev_nvram_init(void) +{ -+ if (DMA64_ENAB(di)) { -+ if (direction == DMA_TX) { -+ W_REG(&di->d64txregs->addrlow, pa + di->ddoffsetlow); -+ W_REG(&di->d64txregs->addrhigh, di->ddoffsethigh); -+ } else { -+ W_REG(&di->d64rxregs->addrlow, pa + di->ddoffsetlow); -+ W_REG(&di->d64rxregs->addrhigh, di->ddoffsethigh); -+ } -+ } else { -+ uint32 offset = di->ddoffsetlow; -+ if ((offset != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) { -+ if (direction == DMA_TX) -+ W_REG(&di->d32txregs->addr, (pa + offset)); -+ else -+ W_REG(&di->d32rxregs->addr, (pa + offset)); -+ } else { -+ /* dma32 address extension */ -+ uint32 ae; -+ ASSERT(di->addrext); -+ ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT; -+ -+ if (direction == DMA_TX) { -+ W_REG(&di->d32txregs->addr, ((pa & ~PCI32ADDR_HIGH) + offset)); -+ SET_REG(&di->d32txregs->control, XC_AE, (ae << XC_AE_SHIFT)); -+ } else { -+ W_REG(&di->d32rxregs->addr, ((pa & ~PCI32ADDR_HIGH) + offset)); -+ SET_REG(&di->d32rxregs->control, RC_AE, (ae << RC_AE_SHIFT)); -+ } ++ int order = 0, ret = 0; ++ struct page *page, *end; ++ unsigned int i; ++ ++ /* Allocate and reserve memory to mmap() */ ++ while ((PAGE_SIZE << order) < NVRAM_SPACE) ++ order++; ++ end = virt_to_page(nvram_buf + (PAGE_SIZE << order) - 1); ++ for (page = virt_to_page(nvram_buf); page <= end; page++) ++ mem_map_reserve(page); ++ ++#ifdef CONFIG_MTD ++ /* Find associated MTD device */ ++ for (i = 0; i < MAX_MTD_DEVICES; i++) { ++ nvram_mtd = get_mtd_device(NULL, i); ++ if (nvram_mtd) { ++ if (!strcmp(nvram_mtd->name, "nvram") && ++ nvram_mtd->size >= NVRAM_SPACE) ++ break; ++ put_mtd_device(nvram_mtd); + } + } -+} ++ if (i >= MAX_MTD_DEVICES) ++ nvram_mtd = NULL; ++#endif + -+/* init the tx or rx descriptor */ -+static INLINE void -+dma32_dd_upd(dma_info_t *di, dma32dd_t *ddring, ulong pa, uint outidx, uint32 *ctrl) -+{ -+ uint offset = di->dataoffsetlow; -+ -+ if ((offset != SB_PCI_DMA) || !(pa & PCI32ADDR_HIGH)) { -+ W_SM(&ddring[outidx].addr, BUS_SWAP32(pa + offset)); -+ W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*ctrl)); -+ } else { -+ /* address extension */ -+ uint32 ae; -+ ASSERT(di->addrext); -+ ae = (pa & PCI32ADDR_HIGH) >> PCI32ADDR_HIGH_SHIFT; -+ -+ *ctrl |= (ae << CTRL_AE_SHIFT); -+ W_SM(&ddring[outidx].addr, BUS_SWAP32((pa & ~PCI32ADDR_HIGH) + offset)); -+ W_SM(&ddring[outidx].ctrl, BUS_SWAP32(*ctrl)); -+ } -+} ++ /* Initialize hash table lock */ ++ spin_lock_init(&nvram_lock); + -+/* init the tx or rx descriptor */ -+static INLINE void -+dma64_dd_upd(dma_info_t *di, dma64dd_t *ddring, ulong pa, uint outidx, uint32 *flags, uint32 bufcount) -+{ -+ uint32 bufaddr_low = pa + di->dataoffsetlow; -+ uint32 bufaddr_high = 0 + di->dataoffsethigh; ++ /* Initialize commit semaphore */ ++ init_MUTEX(&nvram_sem); + -+ uint32 ctrl2 = bufcount & D64_CTRL2_BC_MASK; ++ /* Register char device */ ++ if ((nvram_major = devfs_register_chrdev(0, "nvram", &dev_nvram_fops)) < 0) { ++ ret = nvram_major; ++ goto err; ++ } + -+ W_SM(&ddring[outidx].addrlow, BUS_SWAP32(bufaddr_low)); -+ W_SM(&ddring[outidx].addrhigh, BUS_SWAP32(bufaddr_high)); -+ W_SM(&ddring[outidx].ctrl1, BUS_SWAP32(*flags)); -+ W_SM(&ddring[outidx].ctrl2, BUS_SWAP32(ctrl2)); -+} ++ /* Initialize hash table */ ++ _nvram_init(sbh); + -+void -+dma_txinit(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txinit\n", di->name)); ++ /* Create /dev/nvram handle */ ++ nvram_handle = devfs_register(NULL, "nvram", DEVFS_FL_NONE, nvram_major, 0, ++ S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP, &dev_nvram_fops, NULL); + -+ di->txin = di->txout = 0; -+ di->txavail = di->ntxd - 1; ++ /* Set the SDRAM NCDL value into NVRAM if not already done */ ++ if (getintvar(NULL, "sdram_ncdl") == 0) { ++ unsigned int ncdl; ++ char buf[] = "0x00000000"; + -+ /* clear tx descriptor ring */ -+ if (DMA64_ENAB(di)) { -+ BZERO_SM((void*)di->txd64, (di->ntxd * sizeof (dma64dd_t))); -+ W_REG(&di->d64txregs->control, XC_XE); -+ dma_ddtable_init(di, DMA_TX, di->txdpa); -+ } else { -+ BZERO_SM((void*)di->txd32, (di->ntxd * sizeof (dma32dd_t))); -+ W_REG(&di->d32txregs->control, XC_XE); -+ dma_ddtable_init(di, DMA_TX, di->txdpa); ++ if ((ncdl = sb_memc_get_ncdl(sbh))) { ++ sprintf(buf, "0x%08x", ncdl); ++ nvram_set("sdram_ncdl", buf); ++ nvram_commit(); ++ } + } -+} + -+bool -+dma_txenabled(dma_info_t *di) -+{ -+ uint32 xc; -+ -+ /* If the chip is dead, it is not enabled :-) */ -+ if (DMA64_ENAB(di)) { -+ xc = R_REG(&di->d64txregs->control); -+ return ((xc != 0xffffffff) && (xc & D64_XC_XE)); -+ } else { -+ xc = R_REG(&di->d32txregs->control); -+ return ((xc != 0xffffffff) && (xc & XC_XE)); -+ } -+} ++ return 0; + -+void -+dma_txsuspend(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txsuspend\n", di->name)); -+ if (DMA64_ENAB(di)) -+ OR_REG(&di->d64txregs->control, D64_XC_SE); -+ else -+ OR_REG(&di->d32txregs->control, XC_SE); ++ err: ++ dev_nvram_exit(); ++ return ret; +} + -+void -+dma_txresume(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txresume\n", di->name)); -+ if (DMA64_ENAB(di)) -+ AND_REG(&di->d64txregs->control, ~D64_XC_SE); -+ else -+ AND_REG(&di->d32txregs->control, ~XC_SE); -+} ++module_init(dev_nvram_init); ++module_exit(dev_nvram_exit); +diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c +--- linux.old/arch/mips/bcm947xx/pcibios.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/pcibios.c 2006-10-02 21:22:56.000000000 +0200 +@@ -0,0 +1,380 @@ ++/* ++ * Low-Level PCI and SB support for BCM47xx (Linux support code) ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: pcibios.c,v 1.1.1.9 2006/02/27 03:42:55 honor Exp $ ++ */ + -+bool -+dma_txsuspendedidle(dma_info_t *di) -+{ -+ if (DMA64_ENAB(di)) -+ return dma64_txsuspendedidle(di); -+ else -+ return dma32_txsuspendedidle(di); -+} ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+bool -+dma_txsuspended(dma_info_t *di) -+{ -+ if (DMA64_ENAB(di)) -+ return ((R_REG(&di->d64txregs->control) & D64_XC_SE) == D64_XC_SE); -+ else -+ return ((R_REG(&di->d32txregs->control) & XC_SE) == XC_SE); -+} ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+bool -+dma_txstopped(dma_info_t *di) -+{ -+ if (DMA64_ENAB(di)) -+ return ((R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK) == D64_XS0_XS_STOPPED); -+ else -+ return ((R_REG(&di->d32txregs->status) & XS_XS_MASK) == XS_XS_STOPPED); -+} ++/* Global SB handle */ ++extern sb_t *bcm947xx_sbh; ++extern spinlock_t bcm947xx_sbh_lock; + -+bool -+dma_rxstopped(dma_info_t *di) -+{ -+ if (DMA64_ENAB(di)) -+ return ((R_REG(&di->d64rxregs->status0) & D64_RS0_RS_MASK) == D64_RS0_RS_STOPPED); -+ else -+ return ((R_REG(&di->d32rxregs->status) & RS_RS_MASK) == RS_RS_STOPPED); -+} ++/* Convenience */ ++#define sbh bcm947xx_sbh ++#define sbh_lock bcm947xx_sbh_lock + -+void -+dma_fifoloopbackenable(dma_info_t *di) ++static int ++sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value) +{ -+ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name)); -+ if (DMA64_ENAB(di)) -+ OR_REG(&di->d64txregs->control, D64_XC_LE); -+ else -+ OR_REG(&di->d32txregs->control, XC_LE); ++ unsigned long flags; ++ int ret; ++ ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn), where, value, sizeof(*value)); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+void -+dma_rxinit(dma_info_t *di) ++static int ++sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value) +{ -+ DMA_TRACE(("%s: dma_rxinit\n", di->name)); -+ -+ di->rxin = di->rxout = 0; ++ unsigned long flags; ++ int ret; + -+ /* clear rx descriptor ring */ -+ if (DMA64_ENAB(di)) { -+ BZERO_SM((void*)di->rxd64, (di->nrxd * sizeof (dma64dd_t))); -+ dma_rxenable(di); -+ dma_ddtable_init(di, DMA_RX, di->rxdpa); -+ } else { -+ BZERO_SM((void*)di->rxd32, (di->nrxd * sizeof (dma32dd_t))); -+ dma_rxenable(di); -+ dma_ddtable_init(di, DMA_RX, di->rxdpa); -+ } ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn), where, value, sizeof(*value)); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+void -+dma_rxenable(dma_info_t *di) ++static int ++sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value) +{ -+ DMA_TRACE(("%s: dma_rxenable\n", di->name)); -+ if (DMA64_ENAB(di)) -+ W_REG(&di->d64rxregs->control, ((di->rxoffset << D64_RC_RO_SHIFT) | D64_RC_RE)); -+ else -+ W_REG(&di->d32rxregs->control, ((di->rxoffset << RC_RO_SHIFT) | RC_RE)); ++ unsigned long flags; ++ int ret; ++ ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn), where, value, sizeof(*value)); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+bool -+dma_rxenabled(dma_info_t *di) ++static int ++sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value) +{ -+ uint32 rc; ++ unsigned long flags; ++ int ret; + -+ if (DMA64_ENAB(di)) { -+ rc = R_REG(&di->d64rxregs->control); -+ return ((rc != 0xffffffff) && (rc & D64_RC_RE)); -+ } else { -+ rc = R_REG(&di->d32rxregs->control); -+ return ((rc != 0xffffffff) && (rc & RC_RE)); -+ } ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn), where, &value, sizeof(value)); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+ -+/* !! tx entry routine */ -+int -+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags) ++static int ++sbpci_write_config_word(struct pci_dev *dev, int where, u16 value) +{ -+ if (DMA64_ENAB(di)) { -+ return dma64_txfast(di, p0, coreflags); -+ } else { -+ return dma32_txfast(di, p0, coreflags); -+ } -+} -+ -+/* !! rx entry routine, returns a pointer to the next frame received, or NULL if there are no more */ -+void* -+dma_rx(dma_info_t *di) -+{ -+ void *p; -+ uint len; -+ int skiplen = 0; -+ -+ while ((p = dma_getnextrxp(di, FALSE))) { -+ /* skip giant packets which span multiple rx descriptors */ -+ if (skiplen > 0) { -+ skiplen -= di->rxbufsize; -+ if (skiplen < 0) -+ skiplen = 0; -+ PKTFREE(di->osh, p, FALSE); -+ continue; -+ } -+ -+ len = ltoh16(*(uint16*)(PKTDATA(di->osh, p))); -+ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len)); -+ -+ /* bad frame length check */ -+ if (len > (di->rxbufsize - di->rxoffset)) { -+ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len)); -+ if (len > 0) -+ skiplen = len - (di->rxbufsize - di->rxoffset); -+ PKTFREE(di->osh, p, FALSE); -+ di->hnddma.rxgiants++; -+ continue; -+ } -+ -+ /* set actual length */ -+ PKTSETLEN(di->osh, p, (di->rxoffset + len)); -+ -+ break; -+ } ++ unsigned long flags; ++ int ret; + -+ return (p); ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn), where, &value, sizeof(value)); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+/* post receive buffers */ -+void -+dma_rxfill(dma_info_t *di) ++static int ++sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value) +{ -+ void *p; -+ uint rxin, rxout; -+ uint32 ctrl; -+ uint n; -+ uint i; -+ uint32 pa; -+ uint rxbufsize; -+ -+ /* -+ * Determine how many receive buffers we're lacking -+ * from the full complement, allocate, initialize, -+ * and post them, then update the chip rx lastdscr. -+ */ -+ -+ rxin = di->rxin; -+ rxout = di->rxout; -+ rxbufsize = di->rxbufsize; -+ -+ n = di->nrxpost - NRXDACTIVE(rxin, rxout); -+ -+ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n)); -+ -+ for (i = 0; i < n; i++) { -+ if ((p = PKTGET(di->osh, rxbufsize, FALSE)) == NULL) { -+ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name)); -+ di->hnddma.rxnobuf++; -+ break; -+ } -+ -+ /* Do a cached write instead of uncached write since DMA_MAP -+ * will flush the cache. */ -+ *(uint32*)(PKTDATA(di->osh, p)) = 0; -+ -+ pa = (uint32) DMA_MAP(di->osh, PKTDATA(di->osh, p), rxbufsize, DMA_RX, p); -+ ASSERT(ISALIGNED(pa, 4)); ++ unsigned long flags; ++ int ret; + -+ /* save the free packet pointer */ -+ ASSERT(di->rxp[rxout] == NULL); -+ di->rxp[rxout] = p; ++ spin_lock_irqsave(&sbh_lock, flags); ++ ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn), ++ PCI_FUNC(dev->devfn), where, &value, sizeof(value)); ++ spin_unlock_irqrestore(&sbh_lock, flags); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} + -+ if (DMA64_ENAB(di)) { -+ /* prep the descriptor control value */ -+ if (rxout == (di->nrxd - 1)) -+ ctrl = CTRL_EOT; ++static struct pci_ops pcibios_ops = { ++ sbpci_read_config_byte, ++ sbpci_read_config_word, ++ sbpci_read_config_dword, ++ sbpci_write_config_byte, ++ sbpci_write_config_word, ++ sbpci_write_config_dword ++}; + -+ dma64_dd_upd(di, di->rxd64, pa, rxout, &ctrl, rxbufsize); -+ } else { -+ /* prep the descriptor control value */ -+ ctrl = rxbufsize; -+ if (rxout == (di->nrxd - 1)) -+ ctrl |= CTRL_EOT; -+ dma32_dd_upd(di, di->rxd32, pa, rxout, &ctrl); -+ } + -+ rxout = NEXTRXD(rxout); -+ } ++void __init ++pcibios_init(void) ++{ ++ ulong flags; + -+ di->rxout = rxout; ++ if (!(sbh = sb_kattach())) ++ panic("sb_kattach failed"); ++ spin_lock_init(&sbh_lock); + -+ /* update the chip lastdscr pointer */ -+ if (DMA64_ENAB(di)) { -+ W_REG(&di->d64rxregs->ptr, I2B(rxout, dma64dd_t)); -+ } else { -+ W_REG(&di->d32rxregs->ptr, I2B(rxout, dma32dd_t)); -+ } -+} ++ spin_lock_irqsave(&sbh_lock, flags); ++ sbpci_init(sbh); ++ spin_unlock_irqrestore(&sbh_lock, flags); + -+void -+dma_txreclaim(dma_info_t *di, bool forceall) -+{ -+ void *p; ++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); + -+ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : "")); ++ /* Scan the SB bus */ ++ pci_scan_bus(0, &pcibios_ops, NULL); + -+ while ((p = dma_getnexttxp(di, forceall))) -+ PKTFREE(di->osh, p, TRUE); +} + -+/* -+ * Reclaim next completed txd (txds if using chained buffers) and -+ * return associated packet. -+ * If 'force' is true, reclaim txd(s) and return associated packet -+ * regardless of the value of the hardware "curr" pointer. -+ */ -+void* -+dma_getnexttxp(dma_info_t *di, bool forceall) -+{ -+ if (DMA64_ENAB(di)) { -+ return dma64_getnexttxp(di, forceall); -+ } else { -+ return dma32_getnexttxp(di, forceall); -+ } -+} -+ -+/* like getnexttxp but no reclaim */ -+void* -+dma_peeknexttxp(dma_info_t *di) ++char * __init ++pcibios_setup(char *str) +{ -+ uint end, i; -+ -+ if (DMA64_ENAB(di)) { -+ end = B2I(R_REG(&di->d64txregs->status0) & D64_XS0_CD_MASK, dma64dd_t); -+ } else { -+ end = B2I(R_REG(&di->d32txregs->status) & XS_CD_MASK, dma32dd_t); ++ if (!strncmp(str, "ban=", 4)) { ++ sbpci_ban(simple_strtoul(str + 4, NULL, 0)); ++ return NULL; + } + -+ for (i = di->txin; i != end; i = NEXTTXD(i)) -+ if (di->txp[i]) -+ return (di->txp[i]); -+ -+ return (NULL); ++ return (str); +} + -+/* -+ * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin). -+ */ -+void -+dma_txrotate(di_t *di) -+{ -+ if (DMA64_ENAB(di)) { -+ dma64_txrotate(di); -+ } else { -+ dma32_txrotate(di); -+ } -+} ++static u32 pci_iobase = 0x100; ++static u32 pci_membase = SB_PCI_DMA; + -+void -+dma_rxreclaim(dma_info_t *di) ++void __init ++pcibios_fixup_bus(struct pci_bus *b) +{ -+ void *p; -+ -+ DMA_TRACE(("%s: dma_rxreclaim\n", di->name)); ++ struct list_head *ln; ++ struct pci_dev *d; ++ struct resource *res; ++ int pos, size; ++ u32 *base; ++ u8 irq; + -+ while ((p = dma_getnextrxp(di, TRUE))) -+ PKTFREE(di->osh, p, FALSE); -+} ++ printk("PCI: Fixing up bus %d\n", b->number); + -+void * -+dma_getnextrxp(dma_info_t *di, bool forceall) -+{ -+ if (DMA64_ENAB(di)) { -+ return dma64_getnextrxp(di, forceall); -+ } else { -+ return dma32_getnextrxp(di, forceall); ++ /* Fix up SB */ ++ if (b->number == 0) { ++ for (ln = b->devices.next; ln != &b->devices; ln = ln->next) { ++ d = pci_dev_b(ln); ++ /* Fix up interrupt lines */ ++ pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq); ++ d->irq = irq + 2; ++ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); ++ } + } -+} + -+uintptr -+dma_getvar(dma_info_t *di, char *name) -+{ -+ if (!strcmp(name, "&txavail")) -+ return ((uintptr) &di->txavail); ++ /* Fix up external PCI */ + else { -+ ASSERT(0); ++ for (ln = b->devices.next; ln != &b->devices; ln = ln->next) { ++ d = pci_dev_b(ln); ++ /* Fix up resource bases */ ++ for (pos = 0; pos < 6; pos++) { ++ res = &d->resource[pos]; ++ base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase; ++ if (res->end) { ++ size = res->end - res->start + 1; ++ if (*base & (size - 1)) ++ *base = (*base + size) & ~(size - 1); ++ res->start = *base; ++ res->end = res->start + size - 1; ++ *base += size; ++ pci_write_config_dword(d, ++ PCI_BASE_ADDRESS_0 + (pos << 2), res->start); ++ } ++ /* Fix up PCI bridge BAR0 only */ ++ if (b->number == 1 && PCI_SLOT(d->devfn) == 0) ++ break; ++ } ++ /* Fix up interrupt lines */ ++ if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL)) ++ d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq; ++ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); ++ } + } -+ return (0); +} + -+void -+dma_txblock(dma_info_t *di) ++unsigned int ++pcibios_assign_all_busses(void) +{ -+ di->txavail = 0; ++ return 1; +} + +void -+dma_txunblock(dma_info_t *di) ++pcibios_align_resource(void *data, struct resource *res, ++ unsigned long size, unsigned long align) +{ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; +} + -+uint -+dma_txactive(dma_info_t *di) -+{ -+ return (NTXDACTIVE(di->txin, di->txout)); -+} -+ -+void -+dma_rxpiomode(dma32regs_t *regs) ++int ++pcibios_enable_resources(struct pci_dev *dev) +{ -+ W_REG(®s->control, RC_FM); -+} ++ u16 cmd, old_cmd; ++ int idx; ++ struct resource *r; + -+void -+dma_txpioloopback(dma32regs_t *regs) -+{ -+ OR_REG(®s->control, XC_LE); -+} ++ /* External PCI only */ ++ if (dev->bus->number == 0) ++ return 0; + ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ old_cmd = cmd; ++ for (idx = 0; idx < 6; idx++) { ++ r = &dev->resource[idx]; ++ if (r->flags & IORESOURCE_IO) ++ cmd |= PCI_COMMAND_IO; ++ if (r->flags & IORESOURCE_MEM) ++ cmd |= PCI_COMMAND_MEMORY; ++ } ++ if (dev->resource[PCI_ROM_RESOURCE].start) ++ cmd |= PCI_COMMAND_MEMORY; ++ if (cmd != old_cmd) { ++ printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++ } ++ return 0; ++} + ++int ++pcibios_enable_device(struct pci_dev *dev, int mask) ++{ ++ ulong flags; ++ uint coreidx; ++ void *regs; + ++ /* External PCI device enable */ ++ if (dev->bus->number != 0) ++ return pcibios_enable_resources(dev); + -+/*** 32 bits DMA non-inline functions ***/ -+static bool -+dma32_alloc(dma_info_t *di, uint direction) -+{ -+ uint size; -+ uint ddlen; -+ void *va; ++ /* These cores come out of reset enabled */ ++ if (dev->device == SB_MIPS || ++ dev->device == SB_MIPS33 || ++ dev->device == SB_EXTIF || ++ dev->device == SB_CC) ++ return 0; + -+ ddlen = sizeof (dma32dd_t); ++ spin_lock_irqsave(&sbh_lock, flags); ++ coreidx = sb_coreidx(sbh); ++ regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn)); ++ if (!regs) ++ return PCIBIOS_DEVICE_NOT_FOUND; + -+ size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen); ++ /* ++ * The USB core requires a special bit to be set during core ++ * reset to enable host (OHCI) mode. Resetting the SB core in ++ * pcibios_enable_device() is a hack for compatibility with ++ * vanilla usb-ohci so that it does not have to know about ++ * SB. A driver that wants to use the USB core in device mode ++ * should know about SB and should reset the bit back to 0 ++ * after calling pcibios_enable_device(). ++ */ ++ if (sb_coreid(sbh) == SB_USB) { ++ sb_core_disable(sbh, sb_coreflags(sbh, 0, 0)); ++ sb_core_reset(sbh, 1 << 29, 0); ++ } ++ /* ++ * USB 2.0 special considerations: ++ * ++ * 1. Since the core supports both OHCI and EHCI functions, it must ++ * only be reset once. ++ * ++ * 2. In addition to the standard SB reset sequence, the Host Control ++ * Register must be programmed to bring the USB core and various ++ * phy components out of reset. ++ */ ++ else if (sb_coreid(sbh) == SB_USB20H) { ++ if (!sb_iscoreup(sbh)) { ++ sb_core_reset(sbh, 0, 0); ++ writel(0x7FF, (ulong)regs + 0x200); ++ udelay(1); ++ } ++ } else ++ sb_core_reset(sbh, 0, 0); + -+ if (!ISALIGNED(DMA_CONSISTENT_ALIGN, D32RINGALIGN)) -+ size += D32RINGALIGN; ++ sb_setcoreidx(sbh, coreidx); ++ spin_unlock_irqrestore(&sbh_lock, flags); + ++ return 0; ++} + -+ if (direction == DMA_TX) { -+ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa)) == NULL) { -+ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n", di->name)); -+ return FALSE; -+ } ++void ++pcibios_update_resource(struct pci_dev *dev, struct resource *root, ++ struct resource *res, int resource) ++{ ++ unsigned long where, size; ++ u32 reg; + -+ di->txd32 = (dma32dd_t*) ROUNDUP((uintptr)va, D32RINGALIGN); -+ di->txdalign = (uint)((int8*)di->txd32 - (int8*)va); -+ di->txdpa += di->txdalign; -+ di->txdalloc = size; -+ ASSERT(ISALIGNED((uintptr)di->txd32, D32RINGALIGN)); -+ } else { -+ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa)) == NULL) { -+ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n", di->name)); -+ return FALSE; -+ } -+ di->rxd32 = (dma32dd_t*) ROUNDUP((uintptr)va, D32RINGALIGN); -+ di->rxdalign = (uint)((int8*)di->rxd32 - (int8*)va); -+ di->rxdpa += di->rxdalign; -+ di->rxdalloc = size; -+ ASSERT(ISALIGNED((uintptr)di->rxd32, D32RINGALIGN)); -+ } ++ /* External PCI only */ ++ if (dev->bus->number == 0) ++ return; + -+ return TRUE; ++ where = PCI_BASE_ADDRESS_0 + (resource * 4); ++ size = res->end - res->start; ++ pci_read_config_dword(dev, where, ®); ++ reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); ++ pci_write_config_dword(dev, where, reg); +} + -+static void -+dma32_txreset(dma_info_t *di) ++static void __init ++quirk_sbpci_bridge(struct pci_dev *dev) +{ -+ uint32 status; ++ if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ printk("PCI: Fixing up bridge\n"); + -+ /* suspend tx DMA first */ -+ W_REG(&di->d32txregs->control, XC_SE); -+ SPINWAIT((status = (R_REG(&di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED && -+ status != XS_XS_IDLE && -+ status != XS_XS_STOPPED, -+ 10000); ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ pcibios_enable_resources(dev); + -+ W_REG(&di->d32txregs->control, 0); -+ SPINWAIT((status = (R_REG(&di->d32txregs->status) & XS_XS_MASK)) != XS_XS_DISABLED, -+ 10000); ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3); ++} + -+ if (status != XS_XS_DISABLED) { -+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); -+ } ++struct pci_fixup pcibios_fixups[] = { ++ { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge }, ++ { 0 } ++}; ++ ++/* ++ * If we set up a device for bus mastering, we need to check the latency ++ * timer as certain crappy BIOSes forget to set it properly. ++ */ ++unsigned int pcibios_max_latency = 255; + -+ /* wait for the last transaction to complete */ -+ OSL_DELAY(300); ++void pcibios_set_master(struct pci_dev *dev) ++{ ++ u8 lat; ++ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); ++ if (lat < 16) ++ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; ++ else if (lat > pcibios_max_latency) ++ lat = pcibios_max_latency; ++ else ++ return; ++ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat); ++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + -+static void -+dma32_rxreset(dma_info_t *di) +diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c +--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/prom.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,41 @@ ++/* ++ * Early initialization code for BCM94710 boards ++ * ++ * Copyright 2004, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: prom.c,v 1.1 2005/03/16 13:49:59 wbx Exp $ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++void __init ++prom_init(int argc, const char **argv) +{ -+ uint32 status; ++ unsigned long mem; + -+ W_REG(&di->d32rxregs->control, 0); -+ SPINWAIT((status = (R_REG(&di->d32rxregs->status) & RS_RS_MASK)) != RS_RS_DISABLED, -+ 10000); ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM947XX; + -+ if (status != RS_RS_DISABLED) { -+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); ++ /* Figure out memory size by finding aliases */ ++ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { ++ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == ++ *(unsigned long *)(prom_init)) ++ break; + } ++ add_memory_region(0, mem, BOOT_MEM_RAM); +} + -+static bool -+dma32_txsuspendedidle(dma_info_t *di) ++void __init ++prom_free_prom_memory(void) +{ -+ if (!(R_REG(&di->d32txregs->control) & XC_SE)) -+ return 0; -+ -+ if ((R_REG(&di->d32txregs->status) & XS_XS_MASK) != XS_XS_IDLE) -+ return 0; -+ -+ OSL_DELAY(2); -+ return ((R_REG(&di->d32txregs->status) & XS_XS_MASK) == XS_XS_IDLE); +} -+ +diff -urN linux.old/arch/mips/bcm947xx/sbmips.c linux.dev/arch/mips/bcm947xx/sbmips.c +--- linux.old/arch/mips/bcm947xx/sbmips.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/sbmips.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,1132 @@ +/* -+ * supports full 32bit dma engine buffer addressing so -+ * dma buffers can cross 4 Kbyte page boundaries. ++ * BCM47XX Sonics SiliconBackplane MIPS core routines ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: hndmips.c,v 1.1.1.1 2006/02/27 03:43:16 honor Exp $ + */ -+static int -+dma32_txfast(dma_info_t *di, void *p0, uint32 coreflags) -+{ -+ void *p, *next; -+ uchar *data; -+ uint len; -+ uint txout; -+ uint32 ctrl; -+ uint32 pa; + -+ DMA_TRACE(("%s: dma_txfast\n", di->name)); -+ -+ txout = di->txout; -+ ctrl = 0; -+ -+ /* -+ * Walk the chain of packet buffers -+ * allocating and initializing transmit descriptor entries. -+ */ -+ for (p = p0; p; p = next) { -+ data = PKTDATA(di->osh, p); -+ len = PKTLEN(di->osh, p); -+ next = PKTNEXT(di->osh, p); ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ /* return nonzero if out of tx descriptors */ -+ if (NEXTTXD(txout) == di->txin) -+ goto outoftxd; ++/* sbipsflag register format, indexed by irq. */ ++static const uint32 sbips_int_mask[] = { ++ 0, /* placeholder */ ++ SBIPS_INT1_MASK, ++ SBIPS_INT2_MASK, ++ SBIPS_INT3_MASK, ++ SBIPS_INT4_MASK ++}; + -+ if (len == 0) -+ continue; ++static const uint32 sbips_int_shift[] = { ++ 0, /* placeholder */ ++ SBIPS_INT1_SHIFT, ++ SBIPS_INT2_SHIFT, ++ SBIPS_INT3_SHIFT, ++ SBIPS_INT4_SHIFT ++}; + -+ /* get physical address of buffer start */ -+ pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p); ++/* ++ * Map SB cores sharing the MIPS hardware IRQ0 to virtual dedicated OS IRQs. ++ * Per-port BSP code is required to provide necessary translations between ++ * the shared MIPS IRQ and the virtual OS IRQs based on SB core flag. ++ * ++ * See sb_irq() for the mapping. ++ */ ++static uint shirq_map_base = 0; + -+ /* build the descriptor control value */ -+ ctrl = len & CTRL_BC_MASK; ++/* Returns the SB interrupt flag of the current core. */ ++static uint32 ++sb_getflag(sb_t *sbh) ++{ ++ osl_t *osh; ++ void *regs; ++ sbconfig_t *sb; + -+ ctrl |= coreflags; -+ -+ if (p == p0) -+ ctrl |= CTRL_SOF; -+ if (next == NULL) -+ ctrl |= (CTRL_IOC | CTRL_EOF); -+ if (txout == (di->ntxd - 1)) -+ ctrl |= CTRL_EOT; -+ -+ if (DMA64_ENAB(di)) { -+ dma64_dd_upd(di, di->txd64, pa, txout, &ctrl, len); -+ } else { -+ dma32_dd_upd(di, di->txd32, pa, txout, &ctrl); -+ } ++ osh = sb_osh(sbh); ++ regs = sb_coreregs(sbh); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+ ASSERT(di->txp[txout] == NULL); ++ return (R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK); ++} + -+ txout = NEXTTXD(txout); -+ } ++/* ++ * Returns the MIPS IRQ assignment of the current core. If unassigned, ++ * 0 is returned. ++ */ ++uint ++sb_irq(sb_t *sbh) ++{ ++ osl_t *osh; ++ uint idx; ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag, sbipsflag; ++ uint irq = 0; + -+ /* if last txd eof not set, fix it */ -+ if (!(ctrl & CTRL_EOF)) -+ W_SM(&di->txd32[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); ++ osh = sb_osh(sbh); ++ flag = sb_getflag(sbh); + -+ /* save the packet */ -+ di->txp[PREVTXD(txout)] = p0; ++ idx = sb_coreidx(sbh); + -+ /* bump the tx descriptor index */ -+ di->txout = txout; ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+ /* kick the chip */ -+ if (DMA64_ENAB(di)) { -+ W_REG(&di->d64txregs->ptr, I2B(txout, dma64dd_t)); -+ } else { -+ W_REG(&di->d32txregs->ptr, I2B(txout, dma32dd_t)); ++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ ++ sbipsflag = R_REG(osh, &sb->sbipsflag); ++ for (irq = 1; irq <= 4; irq++) { ++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) ++ break; ++ } ++ if (irq == 5) ++ irq = 0; + } + -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+ -+ return (0); ++ sb_setcoreidx(sbh, idx); + -+ outoftxd: -+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); -+ PKTFREE(di->osh, p0, TRUE); -+ di->txavail = 0; -+ di->hnddma.txnobuf++; -+ return (-1); ++ return irq; +} + -+static void* -+dma32_getnexttxp(dma_info_t *di, bool forceall) ++/* Clears the specified MIPS IRQ. */ ++static void ++BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq) +{ -+ uint start, end, i; -+ void *txp; ++ osl_t *osh; ++ void *regs; ++ sbconfig_t *sb; + -+ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); ++ osh = sb_osh(sbh); + -+ txp = NULL; ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+ start = di->txin; -+ if (forceall) -+ end = di->txout; ++ if (irq == 0) ++ W_REG(osh, &sb->sbintvec, 0); + else -+ end = B2I(R_REG(&di->d32txregs->status) & XS_CD_MASK, dma32dd_t); -+ -+ if ((start == 0) && (end > di->txout)) -+ goto bogus; -+ -+ for (i = start; i != end && !txp; i = NEXTTXD(i)) { -+ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd32[i].addr)) - di->dataoffsetlow), -+ (BUS_SWAP32(R_SM(&di->txd32[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]); -+ -+ W_SM(&di->txd32[i].addr, 0xdeadbeef); -+ txp = di->txp[i]; -+ di->txp[i] = NULL; -+ } -+ -+ di->txin = i; -+ -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+ -+ return (txp); -+ -+bogus: -+/* -+ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", -+ start, end, di->txout, forceall)); -+*/ -+ return (NULL); ++ OR_REG(osh, &sb->sbipsflag, sbips_int_mask[irq]); +} + -+static void * -+dma32_getnextrxp(dma_info_t *di, bool forceall) ++/* ++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS ++ * IRQ 0 may be assigned more than once. ++ * ++ * The old assignment to the specified core is removed first. ++ */ ++static void ++BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit) +{ -+ uint i; -+ void *rxp; -+ -+ /* if forcing, dma engine must be disabled */ -+ ASSERT(!forceall || !dma_rxenabled(di)); -+ -+ i = di->rxin; -+ -+ /* return if no packets posted */ -+ if (i == di->rxout) -+ return (NULL); ++ osl_t *osh; ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag; ++ uint oldirq; + -+ /* ignore curr if forceall */ -+ if (!forceall && (i == B2I(R_REG(&di->d32rxregs->status) & RS_CD_MASK, dma32dd_t))) -+ return (NULL); ++ osh = sb_osh(sbh); + -+ /* get the packet pointer that corresponds to the rx descriptor */ -+ rxp = di->rxp[i]; -+ ASSERT(rxp); -+ di->rxp[i] = NULL; ++ regs = sb_setcore(sbh, coreid, coreunit); ++ ASSERT(regs); ++ flag = sb_getflag(sbh); ++ oldirq = sb_irq(sbh); ++ if (oldirq) ++ sb_clearirq(sbh, oldirq); + -+ /* clear this packet from the descriptor ring */ -+ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd32[i].addr)) - di->dataoffsetlow), -+ di->rxbufsize, DMA_RX, rxp); -+ W_SM(&di->rxd32[i].addr, 0xdeadbeef); ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+ di->rxin = NEXTRXD(i); ++ if (!oldirq) ++ AND_REG(osh, &sb->sbintvec, ~(1 << flag)); + -+ return (rxp); ++ if (irq == 0) ++ OR_REG(osh, &sb->sbintvec, 1 << flag); ++ else { ++ flag <<= sbips_int_shift[irq]; ++ ASSERT(!(flag & ~sbips_int_mask[irq])); ++ flag |= R_REG(osh, &sb->sbipsflag) & ~sbips_int_mask[irq]; ++ W_REG(osh, &sb->sbipsflag, flag); ++ } +} + -+static void -+dma32_txrotate(di_t *di) ++/* ++ * Initializes clocks and interrupts. SB and NVRAM access must be ++ * initialized prior to calling. ++ * ++ * 'shirqmap' enables virtual dedicated OS IRQ mapping if non-zero. ++ */ ++void ++BCMINITFN(sb_mips_init)(sb_t *sbh, uint shirqmap) +{ -+ uint ad; -+ uint nactive; -+ uint rot; -+ uint old, new; -+ uint32 w; -+ uint first, last; -+ -+ ASSERT(dma_txsuspendedidle(di)); ++ osl_t *osh; ++ ulong hz, ns, tmp; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ char *value; ++ uint irq; + -+ nactive = dma_txactive(di); -+ ad = B2I(((R_REG(&di->d32txregs->status) & XS_AD_MASK) >> XS_AD_SHIFT), dma32dd_t); -+ rot = TXD(ad - di->txin); ++ osh = sb_osh(sbh); + -+ ASSERT(rot < di->ntxd); ++ /* Figure out current SB clock speed */ ++ if ((hz = sb_clock(sbh)) == 0) ++ hz = 100000000; ++ ns = 1000000000 / hz; + -+ /* full-ring case is a lot harder - don't worry about this */ -+ if (rot >= (di->ntxd - nactive)) { -+ DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name)); -+ return; -+ } ++ /* Setup external interface timing */ ++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { ++ /* Initialize extif so we can get to the LEDs and external UART */ ++ W_REG(osh, &eir->prog_config, CF_EN); + -+ first = di->txin; -+ last = PREVTXD(di->txout); ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ + -+ /* move entries starting at last and moving backwards to first */ -+ for (old = last; old != PREVTXD(first); old = PREVTXD(old)) { -+ new = TXD(old + rot); ++ /* Set programmable interface timing for external uart */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ ++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ ++ tmp |= CEIL(120, ns); /* W0 = 120nS */ ++ if ((sb_corerev(sbh) < 9) || ++ (BCMINIT(sb_chip)(sbh) == 0x5365)) ++ W_REG(osh, &cc->flash_waitcount, tmp); ++ ++ if ((sb_corerev(sbh) < 9) || ++ ((sb_chip(sbh) == BCM5350_CHIP_ID) && sb_chiprev(sbh) == 0) || ++ (BCMINIT(sb_chip)(sbh) == 0x5365)) { ++ W_REG(osh, &cc->pcmcia_memwait, tmp); ++ } + -+ /* -+ * Move the tx dma descriptor. -+ * EOT is set only in the last entry in the ring. -+ */ -+ w = R_SM(&di->txd32[old].ctrl) & ~CTRL_EOT; -+ if (new == (di->ntxd - 1)) -+ w |= CTRL_EOT; -+ W_SM(&di->txd32[new].ctrl, w); -+ W_SM(&di->txd32[new].addr, R_SM(&di->txd32[old].addr)); -+ -+ /* zap the old tx dma descriptor address field */ -+ W_SM(&di->txd32[old].addr, 0xdeadbeef); -+ -+ /* move the corresponding txp[] entry */ -+ ASSERT(di->txp[new] == NULL); -+ di->txp[new] = di->txp[old]; -+ di->txp[old] = NULL; ++ /* Save shared IRQ mapping base */ ++ shirq_map_base = shirqmap; + } + -+ /* update txin and txout */ -+ di->txin = ad; -+ di->txout = TXD(di->txout + rot); -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+ -+ /* kick the chip */ -+ W_REG(&di->d32txregs->ptr, I2B(di->txout, dma32dd_t)); ++ /* Chip specific initialization */ ++ switch (sb_chip(sbh)) { ++ case BCM4710_CHIP_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ sb_clearirq(sbh, irq); ++ sb_setirq(sbh, 0, SB_CODEC, 0); ++ sb_setirq(sbh, 0, SB_EXTIF, 0); ++ sb_setirq(sbh, 2, SB_ENET, 1); ++ sb_setirq(sbh, 3, SB_ILINE20, 0); ++ sb_setirq(sbh, 4, SB_PCI, 0); ++ ASSERT(eir); ++ value = nvram_get("et0phyaddr"); ++ if (value && !strcmp(value, "31")) { ++ /* Enable internal UART */ ++ W_REG(osh, &eir->corecontrol, CC_UE); ++ /* Give USB its own interrupt */ ++ sb_setirq(sbh, 1, SB_USB, 0); ++ } else { ++ /* Disable internal UART */ ++ W_REG(osh, &eir->corecontrol, 0); ++ /* Give Ethernet its own interrupt */ ++ sb_setirq(sbh, 1, SB_ENET, 0); ++ sb_setirq(sbh, 0, SB_USB, 0); ++ } ++ break; ++ case BCM5350_CHIP_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ sb_clearirq(sbh, irq); ++ sb_setirq(sbh, 0, SB_CC, 0); ++ sb_setirq(sbh, 0, SB_MIPS33, 0); ++ sb_setirq(sbh, 1, SB_D11, 0); ++ sb_setirq(sbh, 2, SB_ENET, 0); ++ sb_setirq(sbh, 3, SB_PCI, 0); ++ sb_setirq(sbh, 4, SB_USB, 0); ++ break; ++ case BCM4785_CHIP_ID: ++ /* Reassign PCI to irq 4 */ ++ sb_setirq(sbh, 4, SB_PCI, 0); ++ break; ++ } +} + -+/*** 64 bits DMA non-inline functions ***/ -+ -+#ifdef BCMDMA64 -+ -+static bool -+dma64_alloc(dma_info_t *di, uint direction) ++uint32 ++BCMINITFN(sb_cpu_clock)(sb_t *sbh) +{ -+ uint size; -+ uint ddlen; -+ uint32 alignbytes; -+ void *va; -+ -+ ddlen = sizeof (dma64dd_t); -+ -+ size = (direction == DMA_TX) ? (di->ntxd * ddlen) : (di->nrxd * ddlen); -+ -+ alignbytes = di->dma64align; -+ -+ if (!ISALIGNED(DMA_CONSISTENT_ALIGN, alignbytes)) -+ size += alignbytes; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ uint32 n, m; ++ uint idx; ++ uint32 pll_type, rate = 0; + ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ pll_type = PLL_TYPE1; + -+ if (direction == DMA_TX) { -+ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->txdpa)) == NULL) { -+ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(ntxd) failed\n", di->name)); -+ return FALSE; ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ n = R_REG(osh, &eir->clockcontrol_n); ++ m = R_REG(osh, &eir->clockcontrol_sb); ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK; ++ n = R_REG(osh, &cc->clockcontrol_n); ++ if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) ++ m = R_REG(osh, &cc->clockcontrol_m3); ++ else if (pll_type == PLL_TYPE5) { ++ rate = 200000000; ++ goto out; + } ++ else if (pll_type == PLL_TYPE3) { ++ if (sb_chip(sbh) == BCM5365_CHIP_ID) { ++ rate = 200000000; ++ goto out; ++ } ++ /* 5350 uses m2 to control mips */ ++ else ++ m = R_REG(osh, &cc->clockcontrol_m2); ++ } else ++ m = R_REG(osh, &cc->clockcontrol_sb); ++ } else ++ goto out; + -+ di->txd64 = (dma64dd_t*) ROUNDUP((uintptr)va, alignbytes); -+ di->txdalign = (uint)((int8*)di->txd64 - (int8*)va); -+ di->txdpa += di->txdalign; -+ di->txdalloc = size; -+ ASSERT(ISALIGNED((uintptr)di->txd64, alignbytes)); -+ } else { -+ if ((va = DMA_ALLOC_CONSISTENT(di->osh, size, &di->rxdpa)) == NULL) { -+ DMA_ERROR(("%s: dma_attach: DMA_ALLOC_CONSISTENT(nrxd) failed\n", di->name)); -+ return FALSE; -+ } -+ di->rxd64 = (dma64dd_t*) ROUNDUP((uintptr)va, alignbytes); -+ di->rxdalign = (uint)((int8*)di->rxd64 - (int8*)va); -+ di->rxdpa += di->rxdalign; -+ di->rxdalloc = size; -+ ASSERT(ISALIGNED((uintptr)di->rxd64, alignbytes)); -+ } + -+ return TRUE; -+} ++ /* calculate rate */ ++ if (BCMINIT(sb_chip)(sbh) == 0x5365) ++ rate = 100000000; ++ else ++ rate = sb_clock_rate(pll_type, n, m); + -+static void -+dma64_txreset(dma_info_t *di) -+{ -+ uint32 status; ++ if (pll_type == PLL_TYPE6) ++ rate = SB2MIPS_T6(rate); ++ ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); + -+ /* suspend tx DMA first */ -+ W_REG(&di->d64txregs->control, D64_XC_SE); -+ SPINWAIT((status = (R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK)) != D64_XS0_XS_DISABLED && -+ status != D64_XS0_XS_IDLE && -+ status != D64_XS0_XS_STOPPED, -+ 10000); ++ return rate; ++} + -+ W_REG(&di->d64txregs->control, 0); -+ SPINWAIT((status = (R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK)) != D64_XS0_XS_DISABLED, -+ 10000); ++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) + -+ if (status != D64_XS0_XS_DISABLED) { -+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); -+ } ++static void ++BCMINITFN(handler)(void) ++{ ++ __asm__( ++ ".set\tmips32\n\t" ++ "ssnop\n\t" ++ "ssnop\n\t" ++ /* Disable interrupts */ ++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ ++ "mfc0 $15, $12\n\t" ++ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ ++ "li $14, -31746\n\t" ++ "and $15, $15, $14\n\t" ++ "mtc0 $15, $12\n\t" ++ "eret\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set\tmips0"); ++} + -+ /* wait for the last transaction to complete */ -+ OSL_DELAY(300); ++/* The following MUST come right after handler() */ ++static void ++BCMINITFN(afterhandler)(void) ++{ +} + -+static void -+dma64_rxreset(dma_info_t *di) ++/* ++ * Set the MIPS, backplane and PCI clocks as closely as possible. ++ * ++ * MIPS clocks synchronization function has been moved from PLL in chipcommon ++ * core rev. 15 to a DLL inside the MIPS core in 4785. ++ */ ++bool ++BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) +{ -+ uint32 status; ++ extifregs_t *eir = NULL; ++ chipcregs_t *cc = NULL; ++ mipsregs_t *mipsr = NULL; ++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; ++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; ++ uint32 pll_type, sync_mode; ++ uint ic_size, ic_lsize; ++ uint idx, i; + -+ W_REG(&di->d64rxregs->control, 0); -+ SPINWAIT((status = (R_REG(&di->d64rxregs->status0) & D64_RS0_RS_MASK)) != D64_RS0_RS_DISABLED, -+ 10000); ++ /* PLL configuration: type 1 */ ++ typedef struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 pci25; ++ } n3m_table_t; ++ static n3m_table_t BCMINITDATA(type1_table)[] = { ++ /* 96.000 32.000 24.000 */ ++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, ++ /* 100.000 33.333 25.000 */ ++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, ++ /* 104.000 31.200 24.960 */ ++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, ++ /* 108.000 32.400 24.923 */ ++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, ++ /* 112.000 32.000 24.889 */ ++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, ++ /* 115.200 32.000 24.000 */ ++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, ++ /* 120.000 30.000 24.000 */ ++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, ++ /* 124.800 31.200 24.960 */ ++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, ++ /* 128.000 32.000 24.000 */ ++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, ++ /* 132.000 33.000 24.750 */ ++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, ++ /* 136.000 32.640 24.727 */ ++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, ++ /* 140.000 30.000 24.706 */ ++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, ++ /* 144.000 30.857 24.686 */ ++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, ++ /* 150.857 33.000 24.000 */ ++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, ++ /* 152.000 32.571 24.000 */ ++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, ++ /* 156.000 31.200 24.960 */ ++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, ++ /* 160.000 32.000 24.000 */ ++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, ++ /* 163.200 32.640 24.727 */ ++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, ++ /* 168.000 32.000 24.889 */ ++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, ++ /* 176.000 33.000 24.000 */ ++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, ++ }; ++ ++ /* PLL configuration: type 3 */ ++ typedef struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 m2; /* that is the clockcontrol_m2 */ ++ } type3_table_t; ++ static type3_table_t type3_table[] = { ++ /* for 5350, mips clock is always double sb clock */ ++ { 150000000, 0x311, 0x4020005 }, ++ { 200000000, 0x311, 0x4020003 }, ++ }; + -+ if (status != D64_RS0_RS_DISABLED) { -+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); -+ } -+} ++ /* PLL configuration: type 2, 4, 7 */ ++ typedef struct { ++ uint32 mipsclock; ++ uint32 sbclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 m2; ++ uint32 m3; ++ uint32 ratio_cfg; ++ uint32 ratio_parm; ++ uint32 d11_r1; ++ uint32 d11_r2; ++ } n4m_table_t; ++ static n4m_table_t BCMINITDATA(type2_table)[] = { ++ { 120000000, 60000000, 0x0303, 0x01000200, 0x01000600, 0x01000200, 0x05000200, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 150000000, 75000000, 0x0303, 0x01000100, 0x01000600, 0x01000100, 0x05000100, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, ++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, ++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, ++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, ++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, ++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01010100, 0x05000100, 8, ++ 0x012a00a9, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01010100, 0x05000100, 11, ++ 0x0aaa0555, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 330000000, 132000000, 0x0903, 0x01000200, 0x00020200, 0x01010100, 0x05000100, 0, ++ 0, 10 /* ratio 4/10 */, 0x02520129 }, ++ { 330000000, 146666666, 0x0903, 0x01010000, 0x00020200, 0x01010100, 0x05000100, 0, ++ 0, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 330000000, 165000000, 0x0903, 0x01000100, 0x00020200, 0x01010100, 0x05000100, 0, ++ 0, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 360000000, 120000000, 0x0a03, 0x01000300, 0x00010201, 0x01010200, 0x05000100, 0, ++ 0, 12 /* ratio 4/12 */, 0x04920492 }, ++ { 360000000, 144000000, 0x0a03, 0x01000200, 0x00010201, 0x01010200, 0x05000100, 0, ++ 0, 10 /* ratio 4/10 */, 0x02520129 }, ++ { 360000000, 160000000, 0x0a03, 0x01010000, 0x00010201, 0x01010200, 0x05000100, 0, ++ 0, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 360000000, 180000000, 0x0a03, 0x01000100, 0x00010201, 0x01010200, 0x05000100, 0, ++ 0, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ { 390000000, 130000000, 0x0b03, 0x01010100, 0x00020101, 0x01020100, 0x05000100, 0, ++ 0, 12 /* ratio 4/12 */, 0x04920492 }, ++ { 390000000, 156000000, 0x0b03, 0x01000200, 0x00020101, 0x01020100, 0x05000100, 0, ++ 0, 10 /* ratio 4/10 */, 0x02520129 }, ++ { 390000000, 173000000, 0x0b03, 0x01010000, 0x00020101, 0x01020100, 0x05000100, 0, ++ 0, 9 /* ratio 4/9 */, 0x012a00a9 }, ++ { 390000000, 195000000, 0x0b03, 0x01000100, 0x00020101, 0x01020100, 0x05000100, 0, ++ 0, 8 /* ratio 4/8 */, 0x00aa0055 }, ++ }; ++ static n4m_table_t BCMINITDATA(type4_table)[] = { ++ { 120000000, 60000000, 0x0009, 0x11020009, 0x01030203, 0x11020009, 0x04000009, 11, ++ 0x0aaa0555 }, ++ { 150000000, 75000000, 0x0009, 0x11050002, 0x01030203, 0x11050002, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, ++ 0x0aaa0555 }, ++ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, ++ 0x012a00a9 }, ++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, ++ 0x254a14a9 }, ++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, ++ 0x02520129 }, ++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, ++ 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, ++ 0x0aaa0555 }, ++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, ++ 0x254a14a9 }, ++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, ++ 0x254a14a9 }, ++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, ++ 0x254a14a9 }, ++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, ++ 0x02520129 }, ++ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, ++ 0x0aaa0555 } ++ }; ++ static n4m_table_t BCMINITDATA(type7_table)[] = { ++ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, ++ 0x0aaa0555 }, ++ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, ++ 0x0aaa0555 }, ++ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, ++ 0x0aaa0555 }, ++ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, ++ 0x0aaa0555 }, ++ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, ++ 0x0aaa0555 } ++ }; + -+static bool -+dma64_txsuspendedidle(dma_info_t *di) -+{ ++ ulong start, end, dst; ++ bool ret = FALSE; + -+ if (!(R_REG(&di->d64txregs->control) & D64_XC_SE)) -+ return 0; -+ -+ if ((R_REG(&di->d64txregs->status0) & D64_XS0_XS_MASK) == D64_XS0_XS_IDLE) -+ return 1; ++ volatile uint32 *dll_ctrl = (volatile uint32 *)0xff400008; ++ volatile uint32 *dll_r1 = (volatile uint32 *)0xff400010; ++ volatile uint32 *dll_r2 = (volatile uint32 *)0xff400018; + -+ return 0; -+} ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ clockcontrol_m2 = NULL; + -+/* -+ * supports full 32bit dma engine buffer addressing so -+ * dma buffers can cross 4 Kbyte page boundaries. -+ */ -+static int -+dma64_txfast(dma_info_t *di, void *p0, uint32 coreflags) -+{ -+ void *p, *next; -+ uchar *data; -+ uint len; -+ uint txout; -+ uint32 flags; -+ uint32 pa; ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ pll_type = PLL_TYPE1; ++ clockcontrol_n = &eir->clockcontrol_n; ++ clockcontrol_sb = &eir->clockcontrol_sb; ++ clockcontrol_pci = &eir->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK; ++ if (pll_type == PLL_TYPE6) { ++ clockcontrol_n = NULL; ++ clockcontrol_sb = NULL; ++ clockcontrol_pci = NULL; ++ } else { ++ clockcontrol_n = &cc->clockcontrol_n; ++ clockcontrol_sb = &cc->clockcontrol_sb; ++ clockcontrol_pci = &cc->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } ++ } else ++ goto done; + -+ DMA_TRACE(("%s: dma_txfast\n", di->name)); ++ if (pll_type == PLL_TYPE6) { ++ /* Silence compilers */ ++ orig_n = orig_sb = orig_pci = 0; ++ } else { ++ /* Store the current clock register values */ ++ orig_n = R_REG(osh, clockcontrol_n); ++ orig_sb = R_REG(osh, clockcontrol_sb); ++ orig_pci = R_REG(osh, clockcontrol_pci); ++ } + -+ txout = di->txout; -+ flags = 0; ++ if (pll_type == PLL_TYPE1) { ++ /* Keep the current PCI clock if not specified */ ++ if (pciclock == 0) { ++ pciclock = sb_clock_rate(pll_type, R_REG(osh, clockcontrol_n), ++ R_REG(osh, clockcontrol_pci)); ++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; ++ } + -+ /* -+ * Walk the chain of packet buffers -+ * allocating and initializing transmit descriptor entries. -+ */ -+ for (p = p0; p; p = next) { -+ data = PKTDATA(di->osh, p); -+ len = PKTLEN(di->osh, p); -+ next = PKTNEXT(di->osh, p); ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++ for (i = 0; i < ARRAYSIZE(type1_table); i++) { ++ ASSERT(type1_table[i].mipsclock == ++ sb_clock_rate(pll_type, type1_table[i].n, ++ type1_table[i].sb)); ++ if (type1_table[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(type1_table[i].mipsclock <= mipsclock); + -+ /* return nonzero if out of tx descriptors */ -+ if (NEXTTXD(txout) == di->txin) -+ goto outoftxd; ++ /* No PLL change */ ++ if ((orig_n == type1_table[i].n) && ++ (orig_sb == type1_table[i].sb) && ++ (orig_pci == type1_table[i].pci33)) ++ goto done; + -+ if (len == 0) -+ continue; ++ /* Set the PLL controls */ ++ W_REG(osh, clockcontrol_n, type1_table[i].n); ++ W_REG(osh, clockcontrol_sb, type1_table[i].sb); ++ if (pciclock == 25000000) ++ W_REG(osh, clockcontrol_pci, type1_table[i].pci25); ++ else ++ W_REG(osh, clockcontrol_pci, type1_table[i].pci33); + -+ /* get physical address of buffer start */ -+ pa = (uint32) DMA_MAP(di->osh, data, len, DMA_TX, p); ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ while (1); ++ } else if (pll_type == PLL_TYPE3) { ++ /* 5350 */ ++ if (sb_chip(sbh) != BCM5365_CHIP_ID) { ++ /* ++ * Search for the closest MIPS clock less than or equal to ++ * a preferred value. ++ */ ++ for (i = 0; i < ARRAYSIZE(type3_table); i++) { ++ if (type3_table[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(type3_table[i].mipsclock <= mipsclock); + -+ flags = coreflags; -+ -+ if (p == p0) -+ flags |= D64_CTRL1_SOF; -+ if (next == NULL) -+ flags |= (D64_CTRL1_IOC | D64_CTRL1_EOF); -+ if (txout == (di->ntxd - 1)) -+ flags |= D64_CTRL1_EOT; ++ /* No PLL change */ ++ orig_m2 = R_REG(osh, &cc->clockcontrol_m2); ++ if ((orig_n == type3_table[i].n) && ++ (orig_m2 == type3_table[i].m2)) { ++ goto done; ++ } + -+ dma64_dd_upd(di, di->txd64, pa, txout, &flags, len); ++ /* Set the PLL controls */ ++ W_REG(osh, clockcontrol_n, type3_table[i].n); ++ W_REG(osh, clockcontrol_m2, type3_table[i].m2); + -+ ASSERT(di->txp[txout] == NULL); ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ while (1); ++ } ++ } else if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) { ++ n4m_table_t *table = NULL, *te; ++ uint tabsz = 0; + -+ txout = NEXTTXD(txout); -+ } ++ ASSERT(cc); + -+ /* if last txd eof not set, fix it */ -+ if (!(flags & D64_CTRL1_EOF)) -+ W_SM(&di->txd64[PREVTXD(txout)].ctrl1, BUS_SWAP32(flags | D64_CTRL1_IOC | D64_CTRL1_EOF)); ++ orig_mips = R_REG(osh, &cc->clockcontrol_m3); + -+ /* save the packet */ -+ di->txp[PREVTXD(txout)] = p0; ++ switch (pll_type) { ++ case PLL_TYPE6: { ++ uint32 new_mips = 0; + -+ /* bump the tx descriptor index */ -+ di->txout = txout; ++ ret = TRUE; ++ if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) ++ new_mips = CC_T6_MMASK; + -+ /* kick the chip */ -+ W_REG(&di->d64txregs->ptr, I2B(txout, dma64dd_t)); ++ if (orig_mips == new_mips) ++ goto done; + -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ W_REG(osh, &cc->clockcontrol_m3, new_mips); ++ goto end_fill; ++ } ++ case PLL_TYPE2: ++ table = type2_table; ++ tabsz = ARRAYSIZE(type2_table); ++ break; ++ case PLL_TYPE4: ++ table = type4_table; ++ tabsz = ARRAYSIZE(type4_table); ++ break; ++ case PLL_TYPE7: ++ table = type7_table; ++ tabsz = ARRAYSIZE(type7_table); ++ break; ++ default: ++ ASSERT("No table for plltype" == NULL); ++ break; ++ } + -+ return (0); ++ /* Store the current clock register values */ ++ orig_m2 = R_REG(osh, &cc->clockcontrol_m2); ++ orig_ratio_parm = 0; ++ orig_ratio_cfg = 0; + -+outoftxd: -+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); -+ PKTFREE(di->osh, p0, TRUE); -+ di->txavail = 0; -+ di->hnddma.txnobuf++; -+ return (-1); -+} ++ /* Look up current ratio */ ++ for (i = 0; i < tabsz; i++) { ++ if ((orig_n == table[i].n) && ++ (orig_sb == table[i].sb) && ++ (orig_pci == table[i].pci33) && ++ (orig_m2 == table[i].m2) && ++ (orig_mips == table[i].m3)) { ++ orig_ratio_parm = table[i].ratio_parm; ++ orig_ratio_cfg = table[i].ratio_cfg; ++ break; ++ } ++ } + -+static void* -+dma64_getnexttxp(dma_info_t *di, bool forceall) -+{ -+ uint start, end, i; -+ void *txp; ++ /* Search for the closest MIPS clock greater or equal to a preferred value */ ++ for (i = 0; i < tabsz; i++) { ++ ASSERT(table[i].mipsclock == ++ sb_clock_rate(pll_type, table[i].n, table[i].m3)); ++ if ((mipsclock <= table[i].mipsclock) && ++ ((sbclock == 0) || (sbclock <= table[i].sbclock))) ++ break; ++ } ++ if (i == tabsz) { ++ ret = FALSE; ++ goto done; ++ } else { ++ te = &table[i]; ++ ret = TRUE; ++ } + -+ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); ++ /* No PLL change */ ++ if ((orig_n == te->n) && ++ (orig_sb == te->sb) && ++ (orig_pci == te->pci33) && ++ (orig_m2 == te->m2) && ++ (orig_mips == te->m3)) ++ goto done; + -+ txp = NULL; ++ /* Set the PLL controls */ ++ W_REG(osh, clockcontrol_n, te->n); ++ W_REG(osh, clockcontrol_sb, te->sb); ++ W_REG(osh, clockcontrol_pci, te->pci33); ++ W_REG(osh, &cc->clockcontrol_m2, te->m2); ++ W_REG(osh, &cc->clockcontrol_m3, te->m3); + -+ start = di->txin; -+ if (forceall) -+ end = di->txout; -+ else -+ end = B2I(R_REG(&di->d64txregs->status0) & D64_XS0_CD_MASK, dma64dd_t); ++ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ ++ if ((pll_type == PLL_TYPE7) && (te->sb != te->m2) && ++ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) ++ W_REG(osh, &cc->chipcontrol, ++ R_REG(osh, &cc->chipcontrol) | 0x100); + -+ if ((start == 0) && (end > di->txout)) -+ goto bogus; ++ /* No ratio change */ ++ if (sb_chip(sbh) != BCM4785_CHIP_ID) { ++ if (orig_ratio_parm == te->ratio_parm) ++ goto end_fill; ++ } + -+ for (i = start; i != end && !txp; i = NEXTTXD(i)) { -+ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->txd64[i].addrlow)) - di->dataoffsetlow), -+ (BUS_SWAP32(R_SM(&di->txd64[i].ctrl2)) & D64_CTRL2_BC_MASK), DMA_TX, di->txp[i]); ++ /* Preload the code into the cache */ ++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); ++ if (sb_chip(sbh) == BCM4785_CHIP_ID) { ++ start = ((ulong) &&start_fill_4785) & ~(ic_lsize - 1); ++ end = ((ulong) &&end_fill_4785 + (ic_lsize - 1)) & ~(ic_lsize - 1); ++ } ++ else { ++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); ++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); ++ } ++ while (start < end) { ++ cache_op(start, Fill_I); ++ start += ic_lsize; ++ } + -+ W_SM(&di->txd64[i].addrlow, 0xdeadbeef); -+ W_SM(&di->txd64[i].addrhigh, 0xdeadbeef); ++ /* Copy the handler */ ++ start = (ulong) &handler; ++ end = (ulong) &afterhandler; ++ dst = KSEG1ADDR(0x180); ++ for (i = 0; i < (end - start); i += 4) ++ *((ulong *)(dst + i)) = *((ulong *)(start + i)); + -+ txp = di->txp[i]; -+ di->txp[i] = NULL; -+ } ++ /* Preload the handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += ic_lsize) ++ cache_op(dst + i, Fill_I); + -+ di->txin = i; ++ /* Clear BEV bit */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); + -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ /* Enable interrupts */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); + -+ return (txp); ++ /* 4785 clock freq change procedures */ ++ if (sb_chip(sbh) == BCM4785_CHIP_ID) { ++ start_fill_4785: ++ /* Switch to async */ ++ MTC0(C0_BROADCOM, 4, (1 << 22)); + -+bogus: -+/* -+ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", -+ start, end, di->txout, forceall)); -+*/ -+ return (NULL); -+} ++ /* Set clock ratio in MIPS */ ++ *dll_r1 = (*dll_r1 & 0xfffffff0) | (te->d11_r1 - 1); ++ *dll_r2 = te->d11_r2; + -+static void * -+dma64_getnextrxp(dma_info_t *di, bool forceall) -+{ -+ uint i; -+ void *rxp; ++ /* Enable new settings in MIPS */ ++ *dll_r1 = *dll_r1 | 0xc0000000; + -+ /* if forcing, dma engine must be disabled */ -+ ASSERT(!forceall || !dma_rxenabled(di)); ++ /* Set active cfg */ ++ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) | (1 << 3) | 1); + -+ i = di->rxin; ++ /* Fake soft reset (clock cfg registers not reset) */ ++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2)); + -+ /* return if no packets posted */ -+ if (i == di->rxout) -+ return (NULL); ++ /* Clear active cfg */ ++ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) & ~(1 << 3)); + -+ /* ignore curr if forceall */ -+ if (!forceall && (i == B2I(R_REG(&di->d64rxregs->status0) & D64_RS0_CD_MASK, dma64dd_t))) -+ return (NULL); ++ /* set watchdog timer */ ++ W_REG(osh, &cc->watchdog, 20); ++ (void) R_REG(osh, &cc->chipid); + -+ /* get the packet pointer that corresponds to the rx descriptor */ -+ rxp = di->rxp[i]; -+ ASSERT(rxp); -+ di->rxp[i] = NULL; ++ /* wait for timer interrupt */ ++ __asm__ __volatile__( ++ ".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0"); ++ end_fill_4785: ++ while (1); ++ } ++ /* Generic clock freq change procedures */ ++ else { ++ /* Enable MIPS timer interrupt */ ++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(mipsr); ++ W_REG(osh, &mipsr->intmask, 1); + -+ /* clear this packet from the descriptor ring */ -+ DMA_UNMAP(di->osh, (BUS_SWAP32(R_SM(&di->rxd64[i].addrlow)) - di->dataoffsetlow), -+ di->rxbufsize, DMA_RX, rxp); ++ start_fill: ++ /* step 1, set clock ratios */ ++ MTC0(C0_BROADCOM, 3, te->ratio_parm); ++ MTC0(C0_BROADCOM, 1, te->ratio_cfg); + -+ W_SM(&di->rxd64[i].addrlow, 0xdeadbeef); -+ W_SM(&di->rxd64[i].addrhigh, 0xdeadbeef); ++ /* step 2: program timer intr */ ++ W_REG(osh, &mipsr->timer, 100); ++ (void) R_REG(osh, &mipsr->timer); + -+ di->rxin = NEXTRXD(i); ++ /* step 3, switch to async */ ++ sync_mode = MFC0(C0_BROADCOM, 4); ++ MTC0(C0_BROADCOM, 4, 1 << 22); + -+ return (rxp); -+} ++ /* step 4, set cfg active */ ++ MTC0(C0_BROADCOM, 2, (1 << 3) | 1); + -+static void -+dma64_txrotate(di_t *di) -+{ -+ uint ad; -+ uint nactive; -+ uint rot; -+ uint old, new; -+ uint32 w; -+ uint first, last; ++ /* steps 5 & 6 */ ++ __asm__ __volatile__( ++ ".set\tmips3\n\t" ++ "wait\n\t" ++ ".set\tmips0"); + -+ ASSERT(dma_txsuspendedidle(di)); ++ /* step 7, clear cfg active */ ++ MTC0(C0_BROADCOM, 2, 0); + -+ nactive = dma_txactive(di); -+ ad = B2I((R_REG(&di->d64txregs->status1) & D64_XS1_AD_MASK), dma64dd_t); -+ rot = TXD(ad - di->txin); ++ /* Additional Step: set back to orig sync mode */ ++ MTC0(C0_BROADCOM, 4, sync_mode); + -+ ASSERT(rot < di->ntxd); ++ /* step 8, fake soft reset */ ++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2)); + -+ /* full-ring case is a lot harder - don't worry about this */ -+ if (rot >= (di->ntxd - nactive)) { -+ DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name)); -+ return; ++ end_fill: ++ /* set watchdog timer */ ++ W_REG(osh, &cc->watchdog, 20); ++ (void) R_REG(osh, &cc->chipid); ++ ++ /* wait for timer interrupt */ ++ __asm__ __volatile__( ++ ".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0"); ++ while (1); ++ } + } + -+ first = di->txin; -+ last = PREVTXD(di->txout); ++done: ++ /* Enable 4785 DLL */ ++ if (sb_chip(sbh) == BCM4785_CHIP_ID) { ++ uint32 tmp; + -+ /* move entries starting at last and moving backwards to first */ -+ for (old = last; old != PREVTXD(first); old = PREVTXD(old)) { -+ new = TXD(old + rot); ++ /* set mask to 1e, enable DLL (bit 0) */ ++ *dll_ctrl |= 0x0041e021; + -+ /* -+ * Move the tx dma descriptor. -+ * EOT is set only in the last entry in the ring. -+ */ -+ w = R_SM(&di->txd64[old].ctrl1) & ~D64_CTRL1_EOT; -+ if (new == (di->ntxd - 1)) -+ w |= D64_CTRL1_EOT; -+ W_SM(&di->txd64[new].ctrl1, w); ++ /* enable aggressive hardware mode */ ++ *dll_ctrl |= 0x00000080; + -+ w = R_SM(&di->txd64[old].ctrl2); -+ W_SM(&di->txd64[new].ctrl2, w); ++ /* wait for lock flag to clear */ ++ while ((*dll_ctrl & 0x2) == 0); + -+ W_SM(&di->txd64[new].addrlow, R_SM(&di->txd64[old].addrlow)); -+ W_SM(&di->txd64[new].addrhigh, R_SM(&di->txd64[old].addrhigh)); ++ /* clear sticky flags (clear on write 1) */ ++ tmp = *dll_ctrl; ++ *dll_ctrl = tmp; + -+ /* zap the old tx dma descriptor address field */ -+ W_SM(&di->txd64[old].addrlow, 0xdeadbeef); -+ W_SM(&di->txd64[old].addrhigh, 0xdeadbeef); ++ /* set mask to 5b'10001 */ ++ *dll_ctrl = (*dll_ctrl & 0xfffc1fff) | 0x00022000; + -+ /* move the corresponding txp[] entry */ -+ ASSERT(di->txp[new] == NULL); -+ di->txp[new] = di->txp[old]; -+ di->txp[old] = NULL; ++ /* enable sync mode */ ++ MTC0(C0_BROADCOM, 4, MFC0(C0_BROADCOM, 4) & 0xfe3fffff); ++ (void)MFC0(C0_BROADCOM, 4); + } + -+ /* update txin and txout */ -+ di->txin = ad; -+ di->txout = TXD(di->txout + rot); -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); + -+ /* kick the chip */ -+ W_REG(&di->d64txregs->ptr, I2B(di->txout, dma64dd_t)); ++ return ret; +} + -+#endif -+ -diff -Nur linux-2.4.32/drivers/net/hnd/linux_osl.c linux-2.4.32-brcm/drivers/net/hnd/linux_osl.c ---- linux-2.4.32/drivers/net/hnd/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/linux_osl.c 2005-12-16 23:39:11.292858500 +0100 -@@ -0,0 +1,708 @@ -+/* -+ * Linux OS Independent Layer -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++void ++BCMINITFN(enable_pfc)(uint32 mode) ++{ ++ ulong start, end; ++ uint ic_size, ic_lsize; + -+#define LINUX_OSL ++ /* If auto then choose the correct mode for this ++ * platform, currently we only ever select one mode ++ */ ++ if (mode == PFC_AUTO) ++ mode = PFC_INST; + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#ifdef mips -+#include -+#endif -+#include ++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); + -+#define PCI_CFG_RETRY 10 ++ /* enable prefetch cache if available */ ++ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { ++ start = ((ulong) &&setpfc_start) & ~(ic_lsize - 1); ++ end = ((ulong) &&setpfc_end + (ic_lsize - 1)) & ~(ic_lsize - 1); + -+#define OS_HANDLE_MAGIC 0x1234abcd -+#define BCM_MEM_FILENAME_LEN 24 ++ /* Preload setpfc code into the cache one line at a time */ ++ while (start < end) { ++ cache_op(start, Fill_I); ++ start += ic_lsize; ++ } + -+typedef struct bcm_mem_link { -+ struct bcm_mem_link *prev; -+ struct bcm_mem_link *next; -+ uint size; -+ int line; -+ char file[BCM_MEM_FILENAME_LEN]; -+} bcm_mem_link_t; ++ /* Now set the pfc */ ++ setpfc_start: ++ /* write range */ ++ *(volatile uint32 *)PFC_CR1 = 0xffff0000; + -+struct os_handle { -+ uint magic; -+ void *pdev; -+ uint malloced; -+ uint failed; -+ bcm_mem_link_t *dbgmem_list; -+}; ++ /* enable */ ++ *(volatile uint32 *)PFC_CR0 = mode; ++ setpfc_end: ++ /* Compiler foder */ ++ ic_size = 0; ++ } ++} + -+static int16 linuxbcmerrormap[] = \ -+{ 0, /* 0 */ -+ -EINVAL, /* BCME_ERROR */ -+ -EINVAL, /* BCME_BADARG*/ -+ -EINVAL, /* BCME_BADOPTION*/ -+ -EINVAL, /* BCME_NOTUP */ -+ -EINVAL, /* BCME_NOTDOWN */ -+ -EINVAL, /* BCME_NOTAP */ -+ -EINVAL, /* BCME_NOTSTA */ -+ -EINVAL, /* BCME_BADKEYIDX */ -+ -EINVAL, /* BCME_RADIOOFF */ -+ -EINVAL, /* BCME_NOTBANDLOCKED */ -+ -EINVAL, /* BCME_NOCLK */ -+ -EINVAL, /* BCME_BADRATESET */ -+ -EINVAL, /* BCME_BADBAND */ -+ -E2BIG, /* BCME_BUFTOOSHORT */ -+ -E2BIG, /* BCME_BUFTOOLONG */ -+ -EBUSY, /* BCME_BUSY */ -+ -EINVAL, /* BCME_NOTASSOCIATED */ -+ -EINVAL, /* BCME_BADSSIDLEN */ -+ -EINVAL, /* BCME_OUTOFRANGECHAN */ -+ -EINVAL, /* BCME_BADCHAN */ -+ -EFAULT, /* BCME_BADADDR */ -+ -ENOMEM, /* BCME_NORESOURCE */ -+ -EOPNOTSUPP, /* BCME_UNSUPPORTED */ -+ -EMSGSIZE, /* BCME_BADLENGTH */ -+ -EINVAL, /* BCME_NOTREADY */ -+ -EPERM, /* BCME_NOTPERMITTED */ -+ -ENOMEM, /* BCME_NOMEM */ -+ -EINVAL, /* BCME_ASSOCIATED */ -+ -ERANGE, /* BCME_RANGE */ -+ -EINVAL /* BCME_NOTFOUND */ -+}; -+ -+/* translate bcmerrors into linux errors*/ -+int -+osl_error(int bcmerror) ++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ ++uint32 ++BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh) +{ -+ int abs_bcmerror; -+ int array_size = ARRAYSIZE(linuxbcmerrormap); -+ -+ abs_bcmerror = ABS(bcmerror); ++ osl_t *osh; ++ sbmemcregs_t *memc; ++ uint32 ret = 0; ++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; ++ uint idx, rev; + -+ if (bcmerror > 0) -+ abs_bcmerror = 0; ++ osh = sb_osh(sbh); + -+ else if (abs_bcmerror >= array_size) -+ abs_bcmerror = BCME_ERROR; ++ idx = sb_coreidx(sbh); + -+ return linuxbcmerrormap[abs_bcmerror]; -+} ++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); ++ if (memc == 0) ++ goto out; + -+osl_t * -+osl_attach(void *pdev) -+{ -+ osl_t *osh; ++ rev = sb_corerev(sbh); + -+ osh = kmalloc(sizeof(osl_t), GFP_ATOMIC); -+ ASSERT(osh); ++ config = R_REG(osh, &memc->config); ++ wr = R_REG(osh, &memc->wrncdlcor); ++ rd = R_REG(osh, &memc->rdncdlcor); ++ misc = R_REG(osh, &memc->miscdlyctl); ++ dqsg = R_REG(osh, &memc->dqsgatencdl); + -+ /* -+ * check the cases where -+ * 1.Error code Added to bcmerror table, but forgot to add it to the OS -+ * dependent error code -+ * 2. Error code is added to the bcmerror table, but forgot to add the -+ * corresponding errorstring(dummy call to bcmerrorstr) -+ */ -+ bcmerrorstr(0); -+ ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(linuxbcmerrormap) - 1)); ++ rd &= MEMC_RDNCDLCOR_RD_MASK; ++ wr &= MEMC_WRNCDLCOR_WR_MASK; ++ dqsg &= MEMC_DQSGATENCDL_G_MASK; ++ ++ if (config & MEMC_CONFIG_DDR) { ++ ret = (wr << 16) | (rd << 8) | dqsg; ++ } else { ++ if (rev > 0) ++ cd = rd; ++ else ++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); ++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; ++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; ++ ret = (sm << 16) | (sd << 8) | cd; ++ } + -+ osh->magic = OS_HANDLE_MAGIC; -+ osh->malloced = 0; -+ osh->failed = 0; -+ osh->dbgmem_list = NULL; -+ osh->pdev = pdev; ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); + -+ return osh; ++ return ret; +} + ++#if defined(BCMPERFSTATS) ++/* ++ * CP0 Register 25 supports 4 semi-independent 32bit performance counters. ++ * $25 select 0, 1, 2, and 3 are the counters. The counters *decrement* (who thought this one up?) ++ * $25 select 4 and 5 each contain 2-16bit control fields, one for each of the 4 counters ++ * $25 select 6 is the global perf control register. ++ */ ++/* enable and start instruction counting */ ++ +void -+osl_detach(osl_t *osh) ++hndmips_perf_instrcount_enable() +{ -+ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC)); -+ kfree(osh); ++ MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */ ++ MTC0(C0_PERFORMANCE, 4, ++ 0x8044 | MFC0(C0_PERFORMANCE, 4)); /* enable instruction counting for counter 0 */ ++ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */ +} + -+void* -+osl_pktget(osl_t *osh, uint len, bool send) ++/* enable and start I$ hit and I$ miss counting */ ++void ++hndmips_perf_icachecount_enable(void) +{ -+ struct sk_buff *skb; -+ -+ if ((skb = dev_alloc_skb(len)) == NULL) -+ return (NULL); -+ -+ skb_put(skb, len); ++ MTC0(C0_PERFORMANCE, 6, 0x80000218); /* enable I$ counting */ ++ MTC0(C0_PERFORMANCE, 4, 0x80148018); /* count I$ hits in cntr 0 and misses in cntr 1 */ ++ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # I$ hits */ ++ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # I$ misses */ ++} + -+ /* ensure the cookie field is cleared */ -+ PKTSETCOOKIE(skb, NULL); ++/* enable and start D$ hit and I$ miss counting */ ++void ++hndmips_perf_dcachecount_enable(void) ++{ ++ MTC0(C0_PERFORMANCE, 6, 0x80000211); /* enable D$ counting */ ++ MTC0(C0_PERFORMANCE, 4, 0x80248028); /* count D$ hits in cntr 0 and misses in cntr 1 */ ++ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # D$ hits */ ++ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # D$ misses */ ++} + -+ return ((void*) skb); ++void ++hndmips_perf_icache_miss_enable() ++{ ++ MTC0(C0_PERFORMANCE, 4, ++ 0x80140000 | MFC0(C0_PERFORMANCE, 4)); /* enable cache misses counting for counter 1 */ ++ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter one */ +} + ++ +void -+osl_pktfree(void *p) ++hndmips_perf_icache_hit_enable() +{ -+ struct sk_buff *skb, *nskb; ++ MTC0(C0_PERFORMANCE, 5, 0x8018 | MFC0(C0_PERFORMANCE, 5)); ++ /* enable cache hits counting for counter 2 */ ++ MTC0(C0_PERFORMANCE, 2, 0); /* zero counter 2 */ ++} + -+ skb = (struct sk_buff*) p; ++uint32 ++hndmips_perf_read_instrcount() ++{ ++ return -(long)(MFC0(C0_PERFORMANCE, 0)); ++} + -+ /* perversion: we use skb->next to chain multi-skb packets */ -+ while (skb) { -+ nskb = skb->next; -+ skb->next = NULL; -+ if (skb->destructor) { -+ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */ -+ dev_kfree_skb_any(skb); -+ } else { -+ /* can free immediately (even in_irq()) if destructor does not exist */ -+ dev_kfree_skb(skb); -+ } -+ skb = nskb; -+ } ++uint32 ++hndmips_perf_read_cache_miss() ++{ ++ return -(long)(MFC0(C0_PERFORMANCE, 1)); +} + +uint32 -+osl_pci_read_config(osl_t *osh, uint offset, uint size) ++hndmips_perf_read_cache_hit() +{ -+ uint val; -+ uint retry=PCI_CFG_RETRY; ++ return -(long)(MFC0(C0_PERFORMANCE, 2)); ++} ++ ++#endif /* BCMINTERNAL | BCMPERFSTATS */ +diff -urN linux.old/arch/mips/bcm947xx/sbpci.c linux.dev/arch/mips/bcm947xx/sbpci.c +--- linux.old/arch/mips/bcm947xx/sbpci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/sbpci.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,768 @@ ++/* ++ * Low-Level PCI and SB support for BCM47xx ++ * ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id: hndpci.c,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $ ++ */ + -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ /* only 4byte access supported */ -+ ASSERT(size == 4); ++/* debug/trace */ ++#ifdef BCMDBG_PCI ++#define PCI_MSG(args) printf args ++#else ++#define PCI_MSG(args) ++#endif /* BCMDBG_PCI */ + -+ do { -+ pci_read_config_dword(osh->pdev, offset, &val); -+ if (val != 0xffffffff) -+ break; -+ } while (retry--); ++/* Can free sbpci_init() memory after boot */ ++#ifndef linux ++#define __init ++#endif /* linux */ + ++/* Emulated configuration space */ ++typedef struct { ++ int n; ++ uint size0; ++ uint size1; ++ uint size2; ++ uint size3; ++} sb_bar_cfg_t; ++static pci_config_regs sb_config_regs[SB_MAXCORES]; ++static sb_bar_cfg_t sb_bar_cfg[SB_MAXCORES]; + -+ return (val); -+} ++/* Links to emulated and real PCI configuration spaces */ ++#define MAXFUNCS 2 ++typedef struct { ++ pci_config_regs *emu; /* emulated PCI config */ ++ pci_config_regs *pci; /* real PCI config */ ++ sb_bar_cfg_t *bar; /* region sizes */ ++} sb_pci_cfg_t; ++static sb_pci_cfg_t sb_pci_cfg[SB_MAXCORES][MAXFUNCS]; + -+void -+osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val) -+{ -+ uint retry=PCI_CFG_RETRY; ++/* Special emulated config space for non-existing device */ ++static pci_config_regs sb_pci_null = { 0xffff, 0xffff }; + -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++/* Banned cores */ ++static uint16 pci_ban[SB_MAXCORES] = { 0 }; ++static uint pci_banned = 0; + -+ /* only 4byte access supported */ -+ ASSERT(size == 4); ++/* CardBus mode */ ++static bool cardbus = FALSE; + -+ do { -+ pci_write_config_dword(osh->pdev, offset, val); -+ if (offset!=PCI_BAR0_WIN) -+ break; -+ if (osl_pci_read_config(osh,offset,size) == val) -+ break; -+ } while (retry--); ++/* Disable PCI host core */ ++static bool pci_disabled = FALSE; + -+} ++/* Host bridge slot #, default to 0 */ ++static uint8 pci_hbslot = 0; + -+/* return bus # for the pci device pointed by osh->pdev */ -+uint -+osl_pci_bus(osl_t *osh) -+{ -+ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev); ++/* Internal macros */ ++#define PCI_SLOTAD_MAP 16 /* SLOT mapps to AD */ ++#define PCI_HBSBCFG_REV 8 /* MIN. core rev. required to ++ * access host bridge PCI cfg space ++ * from SB ++ */ + -+ return ((struct pci_dev *)osh->pdev)->bus->number; -+} ++/* ++ * Functions for accessing external PCI configuration space ++ */ + -+/* return slot # for the pci device pointed by osh->pdev */ -+uint -+osl_pci_slot(osl_t *osh) ++/* Assume one-hot slot wiring */ ++#define PCI_SLOT_MAX 16 /* Max. PCI Slots */ ++ ++static uint32 ++config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off) +{ -+ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev); ++ uint coreidx; ++ sbpciregs_t *regs; ++ uint32 addr = 0; ++ osl_t *osh; + -+ return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn); -+} ++ /* CardBusMode supports only one device */ ++ if (cardbus && dev > 1) ++ return 0; + -+static void -+osl_pcmcia_attr(osl_t *osh, uint offset, char *buf, int size, bool write) -+{ -+} ++ osh = sb_osh(sbh); + -+void -+osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size) -+{ -+ osl_pcmcia_attr(osh, offset, (char *) buf, size, FALSE); -+} ++ coreidx = sb_coreidx(sbh); ++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); + -+void -+osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size) -+{ -+ osl_pcmcia_attr(osh, offset, (char *) buf, size, TRUE); -+} ++ /* Type 0 transaction */ ++ if (bus == 1) { ++ /* Skip unwired slots */ ++ if (dev < PCI_SLOT_MAX) { ++ uint32 win; ++ ++ /* Slide the PCI window to the appropriate slot */ ++ win = (SBTOPCI_CFG0 | ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK)); ++ W_REG(osh, ®s->sbtopci1, win); ++ addr = SB_PCI_CFG | ++ ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) | ++ (func << PCICFG_FUN_SHIFT) | ++ (off & ~3); ++ } ++ } else { ++ /* Type 1 transaction */ ++ W_REG(osh, ®s->sbtopci1, SBTOPCI_CFG1); ++ addr = SB_PCI_CFG | ++ (bus << PCICFG_BUS_SHIFT) | ++ (dev << PCICFG_SLOT_SHIFT) | ++ (func << PCICFG_FUN_SHIFT) | ++ (off & ~3); ++ } + ++ sb_setcoreidx(sbh, coreidx); + -+#ifdef BCMDBG_MEM ++ return addr; ++} + -+void* -+osl_debug_malloc(osl_t *osh, uint size, int line, char* file) ++/* ++ * Read host bridge PCI config registers from Silicon Backplane (>=rev8). ++ * ++ * It returns TRUE to indicate that access to the host bridge's pci config ++ * from SB is ok, and values in 'addr' and 'val' are valid. ++ * ++ * It can only read registers at multiple of 4-bytes. Callers must pick up ++ * needed bytes from 'val' based on 'off' value. Value in 'addr' reflects ++ * the register address where value in 'val' is read. ++ */ ++static bool ++sb_pcihb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, ++ uint32 **addr, uint32 *val) +{ -+ bcm_mem_link_t *p; -+ char* basename; ++ sbpciregs_t *regs; ++ osl_t *osh; ++ uint coreidx; ++ bool ret = FALSE; + -+ ASSERT(size); -+ -+ if ((p = (bcm_mem_link_t*)osl_malloc(osh, sizeof(bcm_mem_link_t) + size)) == NULL) -+ return (NULL); -+ -+ p->size = size; -+ p->line = line; -+ -+ basename = strrchr(file, '/'); -+ /* skip the '/' */ -+ if (basename) -+ basename++; ++ /* sanity check */ ++ ASSERT(bus == 1); ++ ASSERT(dev == pci_hbslot); ++ ASSERT(func == 0); + -+ if (!basename) -+ basename = file; -+ -+ strncpy(p->file, basename, BCM_MEM_FILENAME_LEN); -+ p->file[BCM_MEM_FILENAME_LEN - 1] = '\0'; ++ osh = sb_osh(sbh); + -+ /* link this block */ -+ p->prev = NULL; -+ p->next = osh->dbgmem_list; -+ if (p->next) -+ p->next->prev = p; -+ osh->dbgmem_list = p; ++ /* read pci config when core rev >= 8 */ ++ coreidx = sb_coreidx(sbh); ++ regs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); ++ if (regs && sb_corerev(sbh) >= PCI_HBSBCFG_REV) { ++ *addr = (uint32 *)®s->pcicfg[func][off >> 2]; ++ *val = R_REG(osh, *addr); ++ ret = TRUE; ++ } ++ sb_setcoreidx(sbh, coreidx); + -+ return p + 1; ++ return ret; +} + -+void -+osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file) ++int ++extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ bcm_mem_link_t *p = (bcm_mem_link_t *)((int8*)addr - sizeof(bcm_mem_link_t)); -+ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ uint32 addr = 0, *reg = NULL, val; ++ int ret = 0; + -+ if (p->size == 0) { -+ printk("osl_debug_mfree: double free on addr 0x%x size %d at line %d file %s\n", -+ (uint)addr, size, line, file); -+ ASSERT(p->size); -+ return; -+ } ++ /* ++ * Set value to -1 when: ++ * flag 'pci_disabled' is true; ++ * value of 'addr' is zero; ++ * REG_MAP() fails; ++ * BUSPROBE() fails; ++ */ ++ if (pci_disabled) ++ val = 0xffffffff; ++ else if (bus == 1 && dev == pci_hbslot && func == 0 && ++ sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) ++ ; ++ else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) || ++ ((reg = (uint32 *)REG_MAP(addr, len)) == 0) || ++ (BUSPROBE(val, reg) != 0)) ++ val = 0xffffffff; + -+ if (p->size != size) { -+ printk("osl_debug_mfree: dealloc size %d does not match alloc size %d on addr 0x%x at line %d file %s\n", -+ size, p->size, (uint)addr, line, file); -+ ASSERT(p->size == size); -+ return; -+ } ++ PCI_MSG(("%s: 0x%x <= 0x%p(0x%x), len %d, off 0x%x, buf 0x%p\n", ++ __FUNCTION__, val, reg, addr, len, off, buf)); ++ ++ val >>= 8 * (off & 3); ++ if (len == 4) ++ *((uint32 *) buf) = val; ++ else if (len == 2) ++ *((uint16 *) buf) = (uint16) val; ++ else if (len == 1) ++ *((uint8 *) buf) = (uint8) val; ++ else ++ ret = -1; + -+ /* unlink this block */ -+ if (p->prev) -+ p->prev->next = p->next; -+ if (p->next) -+ p->next->prev = p->prev; -+ if (osh->dbgmem_list == p) -+ osh->dbgmem_list = p->next; -+ p->next = p->prev = NULL; ++ if (reg && addr) ++ REG_UNMAP(reg); + -+ osl_mfree(osh, p, size + sizeof(bcm_mem_link_t)); ++ return ret; +} + -+char* -+osl_debug_memdump(osl_t *osh, char *buf, uint sz) ++int ++extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ bcm_mem_link_t *p; -+ char *obuf; -+ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); -+ obuf = buf; -+ -+ buf += sprintf(buf, " Address\tSize\tFile:line\n"); -+ for (p = osh->dbgmem_list; p && ((buf - obuf) < (sz - 128)); p = p->next) -+ buf += sprintf(buf, "0x%08x\t%5d\t%s:%d\n", -+ (int)p + sizeof(bcm_mem_link_t), p->size, p->file, p->line); -+ -+ return (obuf); -+} ++ osl_t *osh; ++ uint32 addr = 0, *reg = NULL, val; ++ int ret = 0; + -+#endif /* BCMDBG_MEM */ ++ osh = sb_osh(sbh); + -+void* -+osl_malloc(osl_t *osh, uint size) -+{ -+ void *addr; -+ -+ /* only ASSERT if osh is defined */ -+ if (osh) -+ ASSERT(osh->magic == OS_HANDLE_MAGIC); ++ /* ++ * Ignore write attempt when: ++ * flag 'pci_disabled' is true; ++ * value of 'addr' is zero; ++ * REG_MAP() fails; ++ * BUSPROBE() fails; ++ */ ++ if (pci_disabled) ++ return 0; ++ else if (bus == 1 && dev == pci_hbslot && func == 0 && ++ sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) ++ ; ++ else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) || ++ ((reg = (uint32 *) REG_MAP(addr, len)) == 0) || ++ (BUSPROBE(val, reg) != 0)) ++ goto done; + -+ if ((addr = kmalloc(size, GFP_ATOMIC)) == NULL) { -+ if(osh) -+ osh->failed++; -+ return (NULL); ++ if (len == 4) ++ val = *((uint32 *) buf); ++ else if (len == 2) { ++ val &= ~(0xffff << (8 * (off & 3))); ++ val |= *((uint16 *) buf) << (8 * (off & 3)); ++ } else if (len == 1) { ++ val &= ~(0xff << (8 * (off & 3))); ++ val |= *((uint8 *) buf) << (8 * (off & 3)); ++ } else { ++ ret = -1; ++ goto done; + } -+ if (osh) -+ osh->malloced += size; -+ -+ return (addr); -+} + -+void -+osl_mfree(osl_t *osh, void *addr, uint size) -+{ -+ if (osh) { -+ ASSERT(osh->magic == OS_HANDLE_MAGIC); -+ osh->malloced -= size; -+ } -+ kfree(addr); -+} ++ PCI_MSG(("%s: 0x%x => 0x%p\n", __FUNCTION__, val, reg)); + -+uint -+osl_malloced(osl_t *osh) -+{ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); -+ return (osh->malloced); -+} ++ W_REG(osh, reg, val); + -+uint osl_malloc_failed(osl_t *osh) -+{ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); -+ return (osh->failed); ++done: ++ if (reg && addr) ++ REG_UNMAP(reg); ++ ++ return ret; +} + -+void* -+osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap) ++/* ++ * Must access emulated PCI configuration at these locations even when ++ * the real PCI config space exists and is accessible. ++ * ++ * PCI_CFG_VID (0x00) ++ * PCI_CFG_DID (0x02) ++ * PCI_CFG_PROGIF (0x09) ++ * PCI_CFG_SUBCL (0x0a) ++ * PCI_CFG_BASECL (0x0b) ++ * PCI_CFG_HDR (0x0e) ++ * PCI_CFG_INT (0x3c) ++ * PCI_CFG_PIN (0x3d) ++ */ ++#define FORCE_EMUCFG(off, len) \ ++ ((off == PCI_CFG_VID) || (off == PCI_CFG_DID) || \ ++ (off == PCI_CFG_PROGIF) || \ ++ (off == PCI_CFG_SUBCL) || (off == PCI_CFG_BASECL) || \ ++ (off == PCI_CFG_HDR) || \ ++ (off == PCI_CFG_INT) || (off == PCI_CFG_PIN)) ++ ++/* Sync the emulation registers and the real PCI config registers. */ ++static void ++sb_pcid_read_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg, ++ uint off, uint len) +{ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ osl_t *osh; ++ uint oldidx; + -+ return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap)); -+} ++ ASSERT(cfg); ++ ASSERT(cfg->emu); ++ ASSERT(cfg->pci); + -+void -+osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa) -+{ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ /* decide if real PCI config register access is necessary */ ++ if (FORCE_EMUCFG(off, len)) ++ return; + -+ pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa); -+} ++ osh = sb_osh(sbh); + -+uint -+osl_dma_map(osl_t *osh, void *va, uint size, int direction) -+{ -+ int dir; -+ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); -+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; -+ return (pci_map_single(osh->pdev, va, size, dir)); ++ /* access to the real pci config space only when the core is up */ ++ oldidx = sb_coreidx(sbh); ++ sb_setcoreidx(sbh, coreidx); ++ if (sb_iscoreup(sbh)) { ++ if (len == 4) ++ *(uint32 *)((ulong)cfg->emu + off) = ++ htol32(R_REG(osh, (uint32 *)((ulong)cfg->pci + off))); ++ else if (len == 2) ++ *(uint16 *)((ulong)cfg->emu + off) = ++ htol16(R_REG(osh, (uint16 *)((ulong)cfg->pci + off))); ++ else if (len == 1) ++ *(uint8 *)((ulong)cfg->emu + off) = ++ R_REG(osh, (uint8 *)((ulong)cfg->pci + off)); ++ } ++ sb_setcoreidx(sbh, oldidx); +} + -+void -+osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction) ++static void ++sb_pcid_write_config(sb_t *sbh, uint coreidx, sb_pci_cfg_t *cfg, ++ uint off, uint len) +{ -+ int dir; -+ -+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); -+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; -+ pci_unmap_single(osh->pdev, (uint32)pa, size, dir); -+} ++ osl_t *osh; ++ uint oldidx; + -+#if defined(BINOSL) -+void -+osl_assert(char *exp, char *file, int line) -+{ -+ char tempbuf[255]; ++ ASSERT(cfg); ++ ASSERT(cfg->emu); ++ ASSERT(cfg->pci); + -+ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line); -+ panic(tempbuf); -+} -+#endif /* BCMDBG || BINOSL */ ++ osh = sb_osh(sbh); + -+void -+osl_delay(uint usec) -+{ -+ uint d; ++ /* decide if real PCI config register access is necessary */ ++ if (FORCE_EMUCFG(off, len)) ++ return; + -+ while (usec > 0) { -+ d = MIN(usec, 1000); -+ udelay(d); -+ usec -= d; ++ /* access to the real pci config space only when the core is up */ ++ oldidx = sb_coreidx(sbh); ++ sb_setcoreidx(sbh, coreidx); ++ if (sb_iscoreup(sbh)) { ++ if (len == 4) ++ W_REG(osh, (uint32 *)((ulong)cfg->pci + off), ++ ltoh32(*(uint32 *)((ulong)cfg->emu + off))); ++ else if (len == 2) ++ W_REG(osh, (uint16 *)((ulong)cfg->pci + off), ++ ltoh16(*(uint16 *)((ulong)cfg->emu + off))); ++ else if (len == 1) ++ W_REG(osh, (uint8 *)((ulong)cfg->pci + off), ++ *(uint8 *)((ulong)cfg->emu + off)); + } ++ sb_setcoreidx(sbh, oldidx); +} + +/* -+ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++ * Functions for accessing translated SB configuration space + */ -+#ifdef BINOSL -+ -+int -+osl_printf(const char *format, ...) ++static int ++sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ va_list args; -+ char buf[1024]; -+ int len; ++ pci_config_regs *cfg; + -+ /* sprintf into a local buffer because there *is* no "vprintk()".. */ -+ va_start(args, format); -+ len = vsprintf(buf, format, args); -+ va_end(args); ++ if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = sb_pci_cfg[dev][func].emu; + -+ if (len > sizeof (buf)) { -+ printk("osl_printf: buffer overrun\n"); -+ return (0); -+ } ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); + -+ return (printk(buf)); -+} ++ /* use special config space if the device does not exist */ ++ if (!cfg) ++ cfg = &sb_pci_null; ++ /* sync emulation with real PCI config if necessary */ ++ else if (sb_pci_cfg[dev][func].pci) ++ sb_pcid_read_config(sbh, dev, &sb_pci_cfg[dev][func], off, len); + -+int -+osl_sprintf(char *buf, const char *format, ...) -+{ -+ va_list args; -+ int rc; ++ if (len == 4) ++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); ++ else if (len == 2) ++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); ++ else if (len == 1) ++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); ++ else ++ return -1; + -+ va_start(args, format); -+ rc = vsprintf(buf, format, args); -+ va_end(args); -+ return (rc); ++ return 0; +} + -+int -+osl_strcmp(const char *s1, const char *s2) ++static int ++sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ return (strcmp(s1, s2)); -+} ++ uint coreidx; ++ void *regs; ++ pci_config_regs *cfg; ++ osl_t *osh; ++ sb_bar_cfg_t *bar; + -+int -+osl_strncmp(const char *s1, const char *s2, uint n) -+{ -+ return (strncmp(s1, s2, n)); -+} ++ if (dev >= SB_MAXCORES || func >= MAXFUNCS || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = sb_pci_cfg[dev][func].emu; ++ if (!cfg) ++ return -1; + -+int -+osl_strlen(const char *s) -+{ -+ return (strlen(s)); -+} ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); + -+char* -+osl_strcpy(char *d, const char *s) -+{ -+ return (strcpy(d, s)); -+} ++ osh = sb_osh(sbh); + -+char* -+osl_strncpy(char *d, const char *s, uint n) -+{ -+ return (strncpy(d, s, n)); ++ /* Emulate BAR sizing */ ++ if (off >= OFFSETOF(pci_config_regs, base[0]) && ++ off <= OFFSETOF(pci_config_regs, base[3]) && ++ len == 4 && *((uint32 *) buf) == ~0) { ++ coreidx = sb_coreidx(sbh); ++ if ((regs = sb_setcoreidx(sbh, dev))) { ++ bar = sb_pci_cfg[dev][func].bar; ++ /* Highest numbered address match register */ ++ if (off == OFFSETOF(pci_config_regs, base[0])) ++ cfg->base[0] = ~(bar->size0 - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[1]) && bar->n >= 1) ++ cfg->base[1] = ~(bar->size1 - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[2]) && bar->n >= 2) ++ cfg->base[2] = ~(bar->size2 - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[3]) && bar->n >= 3) ++ cfg->base[3] = ~(bar->size3 - 1); ++ } ++ sb_setcoreidx(sbh, coreidx); ++ } ++ else if (len == 4) ++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); ++ else if (len == 2) ++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); ++ else if (len == 1) ++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); ++ else ++ return -1; ++ ++ /* sync emulation with real PCI config if necessary */ ++ if (sb_pci_cfg[dev][func].pci) ++ sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off, len); ++ ++ return 0; +} + -+void -+bcopy(const void *src, void *dst, int len) ++int ++sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ memcpy(dst, src, len); ++ if (bus == 0) ++ return sb_read_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_read_config(sbh, bus, dev, func, off, buf, len); +} + +int -+bcmp(const void *b1, const void *b2, int len) ++sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ return (memcmp(b1, b2, len)); ++ if (bus == 0) ++ return sb_write_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_write_config(sbh, bus, dev, func, off, buf, len); +} + +void -+bzero(void *b, int len) ++sbpci_ban(uint16 core) +{ -+ memset(b, '\0', len); ++ if (pci_banned < ARRAYSIZE(pci_ban)) ++ pci_ban[pci_banned++] = core; +} + -+uint32 -+osl_readl(volatile uint32 *r) ++/* ++ * Initiliaze PCI core. Return 0 after a successful initialization. ++ * Otherwise return -1 to indicate there is no PCI core and return 1 ++ * to indicate PCI core is disabled. ++ */ ++int __init ++sbpci_init_pci(sb_t *sbh) +{ -+ return (readl(r)); -+} ++ uint chip, chiprev, chippkg, host; ++ uint32 boardflags; ++ sbpciregs_t *pci; ++ sbconfig_t *sb; ++ uint32 val; ++ int ret = 0; ++ char *hbslot; ++ osl_t *osh; + -+uint16 -+osl_readw(volatile uint16 *r) -+{ -+ return (readw(r)); -+} ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); + -+uint8 -+osl_readb(volatile uint8 *r) -+{ -+ return (readb(r)); -+} ++ osh = sb_osh(sbh); + -+void -+osl_writel(uint32 v, volatile uint32 *r) -+{ -+ writel(v, r); -+} ++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) { ++ printk("PCI: no core\n"); ++ pci_disabled = TRUE; ++ return -1; ++ } + -+void -+osl_writew(uint16 v, volatile uint16 *r) -+{ -+ writew(v, r); -+} ++ if ((chip == 0x4310) && (chiprev == 0)) ++ pci_disabled = TRUE; ++ ++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); + -+void -+osl_writeb(uint8 v, volatile uint8 *r) -+{ -+ writeb(v, r); -+} ++ boardflags = (uint32) getintvar(NULL, "boardflags"); + -+void * -+osl_uncached(void *va) -+{ -+#ifdef mips -+ return ((void*)KSEG1ADDR(va)); -+#else -+ return ((void*)va); -+#endif -+} ++ /* ++ * The 200-pin BCM4712 package does not bond out PCI. Even when ++ * PCI is bonded out, some boards may leave the pins ++ * floating. ++ */ ++ if (((chip == BCM4712_CHIP_ID) && ++ ((chippkg == BCM4712SMALL_PKG_ID) || ++ (chippkg == BCM4712MID_PKG_ID))) || ++ (boardflags & BFL_NOPCI)) ++ pci_disabled = TRUE; + -+uint -+osl_getcycles(void) -+{ -+ uint cycles; ++ /* Enable the core */ ++ sb_core_reset(sbh, 0, 0); + -+#if defined(mips) -+ cycles = read_c0_count() * 2; -+#elif defined(__i386__) -+ rdtscl(cycles); -+#else -+ cycles = 0; -+#endif -+ return cycles; -+} ++ /* ++ * If the PCI core should not be touched (disabled, not bonded ++ * out, or pins floating), do not even attempt to access core ++ * registers. Otherwise, try to determine if it is in host ++ * mode. ++ */ ++ if (pci_disabled) ++ host = 0; ++ else ++ host = !BUSPROBE(val, &pci->control); + -+void * -+osl_reg_map(uint32 pa, uint size) -+{ -+ return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); -+} ++ if (!host) { ++ ret = 1; + -+void -+osl_reg_unmap(void *va) -+{ -+ iounmap(va); -+} ++ /* Disable PCI interrupts in client mode */ ++ W_REG(osh, &sb->sbintvec, 0); + -+int -+osl_busprobe(uint32 *val, uint32 addr) -+{ -+#ifdef mips -+ return get_dbe(*val, (uint32*)addr); -+#else -+ *val = readl(addr); -+ return 0; -+#endif -+} ++ /* Disable the PCI bridge in client mode */ ++ sbpci_ban(SB_PCI); ++ sb_core_disable(sbh, 0); + -+uchar* -+osl_pktdata(osl_t *osh, void *skb) -+{ -+ return (((struct sk_buff*)skb)->data); -+} ++ printk("PCI: Disabled\n"); ++ } else { ++ printk("PCI: Initializing host\n"); + -+uint -+osl_pktlen(osl_t *osh, void *skb) -+{ -+ return (((struct sk_buff*)skb)->len); -+} ++ /* Disable PCI SBReqeustTimeout for BCM4785 */ ++ if (chip == BCM4785_CHIP_ID) { ++ AND_REG(osh, &sb->sbimconfiglow, ~0x00000070); ++ sb_commit(sbh); ++ } + -+uint -+osl_pktheadroom(osl_t *osh, void *skb) -+{ -+ return (uint) skb_headroom((struct sk_buff *) skb); -+} ++ /* Reset the external PCI bus and enable the clock */ ++ W_REG(osh, &pci->control, 0x5); /* enable the tristate drivers */ ++ W_REG(osh, &pci->control, 0xd); /* enable the PCI clock */ ++ OSL_DELAY(150); /* delay > 100 us */ ++ W_REG(osh, &pci->control, 0xf); /* deassert PCI reset */ ++ /* Use internal arbiter and park REQ/GRNT at external master 0 */ ++ W_REG(osh, &pci->arbcontrol, PCI_INT_ARB); ++ OSL_DELAY(1); /* delay 1 us */ ++ if (sb_corerev(sbh) >= 8) { ++ val = getintvar(NULL, "parkid"); ++ ASSERT(val <= PCI_PARKID_LAST); ++ OR_REG(osh, &pci->arbcontrol, val << PCI_PARKID_SHIFT); ++ OSL_DELAY(1); ++ } + -+uint -+osl_pkttailroom(osl_t *osh, void *skb) -+{ -+ return (uint) skb_tailroom((struct sk_buff *) skb); -+} ++ /* Enable CardBusMode */ ++ cardbus = getintvar(NULL, "cardbus") == 1; ++ if (cardbus) { ++ printk("PCI: Enabling CardBus\n"); ++ /* GPIO 1 resets the CardBus device on bcm94710ap */ ++ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ W_REG(osh, &pci->sprom[0], R_REG(osh, &pci->sprom[0]) | 0x400); ++ } + -+void* -+osl_pktnext(osl_t *osh, void *skb) -+{ -+ return (((struct sk_buff*)skb)->next); -+} ++ /* 64 MB I/O access window */ ++ W_REG(osh, &pci->sbtopci0, SBTOPCI_IO); ++ /* 64 MB configuration access window */ ++ W_REG(osh, &pci->sbtopci1, SBTOPCI_CFG0); ++ /* 1 GB memory access window */ ++ W_REG(osh, &pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); + -+void -+osl_pktsetnext(void *skb, void *x) -+{ -+ ((struct sk_buff*)skb)->next = (struct sk_buff*)x; -+} ++ /* Host bridge slot # nvram overwrite */ ++ if ((hbslot = nvram_get("pcihbslot"))) { ++ pci_hbslot = bcm_strtoul(hbslot, NULL, 0); ++ ASSERT(pci_hbslot < PCI_MAX_DEVICES); ++ } + -+void -+osl_pktsetlen(osl_t *osh, void *skb, uint len) -+{ -+ __skb_trim((struct sk_buff*)skb, len); -+} ++ /* Enable PCI bridge BAR0 prefetch and burst */ ++ val = 6; ++ sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val, sizeof(val)); + -+uchar* -+osl_pktpush(osl_t *osh, void *skb, int bytes) -+{ -+ return (skb_push((struct sk_buff*)skb, bytes)); -+} ++ /* Enable PCI interrupts */ ++ W_REG(osh, &pci->intmask, PCI_INTA); ++ } + -+uchar* -+osl_pktpull(osl_t *osh, void *skb, int bytes) -+{ -+ return (skb_pull((struct sk_buff*)skb, bytes)); ++ return ret; +} + -+void* -+osl_pktdup(osl_t *osh, void *skb) ++/* ++ * Get the PCI region address and size information. ++ */ ++static void __init ++sbpci_init_regions(sb_t *sbh, uint func, pci_config_regs *cfg, sb_bar_cfg_t *bar) +{ -+ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC)); -+} ++ osl_t *osh; ++ uint16 coreid; ++ void *regs; ++ sbconfig_t *sb; ++ uint32 base; + -+void* -+osl_pktcookie(void *skb) -+{ -+ return ((void*)((struct sk_buff*)skb)->csum); -+} ++ osh = sb_osh(sbh); ++ coreid = sb_coreid(sbh); ++ regs = sb_coreregs(sbh); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+void -+osl_pktsetcookie(void *skb, void *x) -+{ -+ ((struct sk_buff*)skb)->csum = (uint)x; -+} ++ switch (coreid) { ++ case SB_USB20H: ++ base = htol32(sb_base(R_REG(osh, &sb->sbadmatch0))); + -+void* -+osl_pktlink(void *skb) -+{ -+ return (((struct sk_buff*)skb)->prev); ++ cfg->base[0] = func == 0 ? base : base + 0x800; /* OHCI/EHCI */ ++ cfg->base[1] = 0; ++ cfg->base[2] = 0; ++ cfg->base[3] = 0; ++ cfg->base[4] = 0; ++ cfg->base[5] = 0; ++ bar->n = 1; ++ bar->size0 = func == 0 ? 0x200 : 0x100; /* OHCI/EHCI */ ++ bar->size1 = 0; ++ bar->size2 = 0; ++ bar->size3 = 0; ++ break; ++ default: ++ cfg->base[0] = htol32(sb_base(R_REG(osh, &sb->sbadmatch0))); ++ cfg->base[1] = htol32(sb_base(R_REG(osh, &sb->sbadmatch1))); ++ cfg->base[2] = htol32(sb_base(R_REG(osh, &sb->sbadmatch2))); ++ cfg->base[3] = htol32(sb_base(R_REG(osh, &sb->sbadmatch3))); ++ cfg->base[4] = 0; ++ cfg->base[5] = 0; ++ bar->n = (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; ++ bar->size0 = sb_size(R_REG(osh, &sb->sbadmatch0)); ++ bar->size1 = sb_size(R_REG(osh, &sb->sbadmatch1)); ++ bar->size2 = sb_size(R_REG(osh, &sb->sbadmatch2)); ++ bar->size3 = sb_size(R_REG(osh, &sb->sbadmatch3)); ++ break; ++ } +} + -+void -+osl_pktsetlink(void *skb, void *x) ++/* ++ * Construct PCI config spaces for SB cores so that they ++ * can be accessed as if they were PCI devices. ++ */ ++static void __init ++sbpci_init_cores(sb_t *sbh) +{ -+ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x; -+} ++ uint chiprev, coreidx, i; ++ sbconfig_t *sb; ++ pci_config_regs *cfg, *pci; ++ sb_bar_cfg_t *bar; ++ void *regs; ++ osl_t *osh; ++ uint16 vendor, device; ++ uint16 coreid; ++ uint8 class, subclass, progif; ++ uint dev; ++ uint8 header; ++ uint func; + -+uint -+osl_pktprio(void *skb) -+{ -+ return (((struct sk_buff*)skb)->priority); -+} ++ chiprev = sb_chiprev(sbh); ++ coreidx = sb_coreidx(sbh); + -+void -+osl_pktsetprio(void *skb, uint x) -+{ -+ ((struct sk_buff*)skb)->priority = x; -+} ++ osh = sb_osh(sbh); + ++ /* Scan the SB bus */ ++ bzero(sb_config_regs, sizeof(sb_config_regs)); ++ bzero(sb_bar_cfg, sizeof(sb_bar_cfg)); ++ bzero(sb_pci_cfg, sizeof(sb_pci_cfg)); ++ memset(&sb_pci_null, -1, sizeof(sb_pci_null)); ++ cfg = sb_config_regs; ++ bar = sb_bar_cfg; ++ for (dev = 0; dev < SB_MAXCORES; dev ++) { ++ /* Check if the core exists */ ++ if (!(regs = sb_setcoreidx(sbh, dev))) ++ continue; ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+#endif /* BINOSL */ -diff -Nur linux-2.4.32/drivers/net/hnd/Makefile linux-2.4.32-brcm/drivers/net/hnd/Makefile ---- linux-2.4.32/drivers/net/hnd/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/Makefile 2005-12-16 23:39:11.284858000 +0100 -@@ -0,0 +1,19 @@ -+# -+# Makefile for the BCM47xx specific kernel interface routines -+# under Linux. -+# ++ /* Check if this core is banned */ ++ coreid = sb_coreid(sbh); ++ for (i = 0; i < pci_banned; i++) ++ if (coreid == pci_ban[i]) ++ break; ++ if (i < pci_banned) ++ continue; + -+EXTRA_CFLAGS += -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER ++ for (func = 0; func < MAXFUNCS; ++func) { ++ /* Make sure we won't go beyond the limit */ ++ if (cfg >= &sb_config_regs[SB_MAXCORES]) { ++ printk("PCI: too many emulated devices\n"); ++ goto done; ++ } + -+O_TARGET := hnd.o ++ /* Convert core id to pci id */ ++ if (sb_corepciid(sbh, func, &vendor, &device, &class, &subclass, ++ &progif, &header)) ++ continue; + -+HND_OBJS := bcmutils.o hnddma.o linux_osl.o sbutils.o bcmsrom.o ++ /* ++ * Differentiate real PCI config from emulated. ++ * non zero 'pci' indicate there is a real PCI config space ++ * for this device. ++ */ ++ switch (device) { ++ case BCM47XX_GIGETH_ID: ++ pci = (pci_config_regs *)((uint32)regs + 0x800); ++ break; ++ case BCM47XX_SATAXOR_ID: ++ pci = (pci_config_regs *)((uint32)regs + 0x400); ++ break; ++ case BCM47XX_ATA100_ID: ++ pci = (pci_config_regs *)((uint32)regs + 0x800); ++ break; ++ default: ++ pci = NULL; ++ break; ++ } ++ /* Supported translations */ ++ cfg->vendor = htol16(vendor); ++ cfg->device = htol16(device); ++ cfg->rev_id = chiprev; ++ cfg->prog_if = progif; ++ cfg->sub_class = subclass; ++ cfg->base_class = class; ++ cfg->header_type = header; ++ sbpci_init_regions(sbh, func, cfg, bar); ++ /* Save core interrupt flag */ ++ cfg->int_pin = R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ /* Save core interrupt assignment */ ++ cfg->int_line = sb_irq(sbh); ++ /* Indicate there is no SROM */ ++ *((uint32 *) &cfg->sprom_control) = 0xffffffff; ++ ++ /* Point to the PCI config spaces */ ++ sb_pci_cfg[dev][func].emu = cfg; ++ sb_pci_cfg[dev][func].pci = pci; ++ sb_pci_cfg[dev][func].bar = bar; ++ cfg ++; ++ bar ++; ++ } ++ } + -+export-objs := shared_ksyms.o -+obj-y := shared_ksyms.o $(HND_OBJS) -+obj-m := $(O_TARGET) ++done: ++ sb_setcoreidx(sbh, coreidx); ++} + -+include $(TOPDIR)/Rules.make ++/* ++ * Initialize PCI core and construct PCI config spaces for SB cores. ++ * Must propagate sbpci_init_pci() return value to the caller to let ++ * them know the PCI core initialization status. ++ */ ++int __init ++sbpci_init(sb_t *sbh) ++{ ++ int status = sbpci_init_pci(sbh); ++ sbpci_init_cores(sbh); ++ return status; ++} + -+shared_ksyms.c: shared_ksyms.sh $(HND_OBJS) -+ sh -e $< $(HND_OBJS) > $@ -diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/hnd/sbutils.c ---- linux-2.4.32/drivers/net/hnd/sbutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/sbutils.c 2005-12-16 23:39:11.316860000 +0100 -@@ -0,0 +1,2837 @@ +diff -urN linux.old/arch/mips/bcm947xx/sbutils.c linux.dev/arch/mips/bcm947xx/sbutils.c +--- linux.old/arch/mips/bcm947xx/sbutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/sbutils.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,3103 @@ +/* + * Misc utility routines for accessing chip-specific features + * of the SiliconBackplane-based Broadcom chips. + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * $Id: sbutils.c,v 1.10 2006/04/08 07:12:42 honor Exp $ + */ + +#include ++#include +#include -+#include +#include ++#include +#include +#include +#include @@ -14940,12 +12002,15 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +#include +#include +#include ++#include +#include ++#ifdef __mips__ ++#include ++#endif /* __mips__ */ + +/* debug/trace */ +#define SB_ERROR(args) + -+ +typedef uint32 (*sb_intrsoff_t)(void *intr_arg); +typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); +typedef bool (*sb_intrsenabled_t)(void *intr_arg); @@ -14953,7 +12018,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +/* misc sb info needed by some of the routines */ +typedef struct sb_info { + -+ struct sb_pub sb; /* back plane public state(must be first field of sb_info */ ++ struct sb_pub sb; /* back plane public state (must be first field) */ + + void *osh; /* osl os handle */ + void *sdh; /* bcmsdh handle */ @@ -14973,56 +12038,60 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + uint coreid[SB_MAXCORES]; /* id of each core */ + + void *intr_arg; /* interrupt callback function arg */ -+ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ -+ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ -+ sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */ ++ sb_intrsoff_t intrsoff_fn; /* turns chip interrupts off */ ++ sb_intrsrestore_t intrsrestore_fn; /* restore chip interrupts */ ++ sb_intrsenabled_t intrsenabled_fn; /* check if interrupts are enabled */ + +} sb_info_t; + +/* local prototypes */ -+static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, -+ uint bustype, void *sdh, char **vars, int *varsz); -+static void BCMINIT(sb_scan)(sb_info_t *si); ++static sb_info_t * sb_doattach(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, uint *varsz); ++static void sb_scan(sb_info_t *si); +static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val); +static uint _sb_coreidx(sb_info_t *si); +static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit); -+static uint BCMINIT(sb_pcidev2chip)(uint pcidev); -+static uint BCMINIT(sb_chip2numcores)(uint chip); ++static uint sb_pcidev2chip(uint pcidev); ++static uint sb_chip2numcores(uint chip); +static bool sb_ispcie(sb_info_t *si); +static bool sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen); +static int sb_pci_fixcfg(sb_info_t *si); + +/* routines to access mdio slave device registers */ +static int sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint readdr, uint val); -+static void BCMINIT(sb_war30841)(sb_info_t *si); ++static void sb_war30841(sb_info_t *si); + +/* delay needed between the mdio control/ mdiodata register data access */ +#define PR28829_DELAY() OSL_DELAY(10) + ++/* size that can take bitfielddump */ ++#define BITFIELD_DUMP_SIZE 32 + -+/* global variable to indicate reservation/release of gpio's*/ ++/* global variable to indicate reservation/release of gpio's */ +static uint32 sb_gpioreservation = 0; + +#define SB_INFO(sbh) (sb_info_t*)sbh -+#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) -+#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE)) ++#define SET_SBREG(si, r, mask, val) \ ++ W_SBREG((si), (r), ((R_SBREG((si), (r)) & ~(mask)) | (val))) ++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && \ ++ ISALIGNED((x), SB_CORE_SIZE)) +#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE)) +#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF) +#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) +#define BADIDX (SB_MAXCORES+1) -+#define NOREV -1 ++#define NOREV -1 /* Invalid rev */ + -+#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) -+#define PCIE(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE)) ++#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) ++#define PCIE(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE)) + +/* sonicsrev */ +#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT) +#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT) + -+#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) -+#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) -+#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) -+#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) ++#define R_SBREG(si, sbr) sb_read_sbreg((si), (sbr)) ++#define W_SBREG(si, sbr, v) sb_write_sbreg((si), (sbr), (v)) ++#define AND_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) & (v))) ++#define OR_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) | (v))) + +/* + * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ @@ -15036,25 +12105,28 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } + +/* dynamic clock control defines */ -+#define LPOMINFREQ 25000 /* low power oscillator min */ -+#define LPOMAXFREQ 43000 /* low power oscillator max */ -+#define XTALMINFREQ 19800000 /* 20 MHz - 1% */ -+#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */ -+#define PCIMINFREQ 25000000 /* 25 MHz */ -+#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */ ++#define LPOMINFREQ 25000 /* low power oscillator min */ ++#define LPOMAXFREQ 43000 /* low power oscillator max */ ++#define XTALMINFREQ 19800000 /* 20 MHz - 1% */ ++#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */ ++#define PCIMINFREQ 25000000 /* 25 MHz */ ++#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */ + -+#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ -+#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ ++#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ ++#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ + -+#define MIN_DUMPBUFLEN 32 /* debug */ ++/* different register spaces to access thr'u pcie indirect access */ ++#define PCIE_CONFIGREGS 1 /* Access to config space */ ++#define PCIE_PCIEREGS 2 /* Access to pcie registers */ + -+/* different register spaces to access thr'u pcie indirect access*/ -+#define PCIE_CONFIGREGS 1 -+#define PCIE_PCIEREGS 2 ++/* force HT war check */ ++#define FORCEHT_WAR32414(si) \ ++ ((PCIE(si)) && (((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev == 1)) || \ ++ ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev <= 3)))) + +/* GPIO Based LED powersave defines */ -+#define DEFAULT_GPIO_ONTIME 10 -+#define DEFAULT_GPIO_OFFTIME 90 ++#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ ++#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ + +#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) + @@ -15071,16 +12143,16 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ -+ if(si->memseg) { ++ if (si->memseg) { + INTR_OFF(si, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ sbr = (uint32) ((uintptr) sbr & ~(1 << 11)); /* mask out bit 11*/ ++ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */ + } + -+ val = R_REG(sbr); ++ val = R_REG(si->osh, sbr); + -+ if(si->memseg) { ++ if (si->memseg) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(si, intr_val); @@ -15103,29 +12175,29 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ -+ if(si->memseg) { ++ if (si->memseg) { + INTR_OFF(si, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ sbr = (uint32) ((uintptr) sbr & ~(1 << 11)); /* mask out bit 11*/ ++ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */ + } + + if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) { +#ifdef IL_BIGENDIAN -+ dummy = R_REG(sbr); -+ W_REG(((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); ++ dummy = R_REG(si->osh, sbr); ++ W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); ++ dummy = R_REG(si->osh, sbr); ++ W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff)); +#else -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+ dummy = R_REG(sbr); -+ W_REG(((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); -+#endif ++ dummy = R_REG(si->osh, sbr); ++ W_REG(si->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff)); ++ dummy = R_REG(si->osh, sbr); ++ W_REG(si->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff)); ++#endif /* IL_BIGENDIAN */ + } else -+ W_REG(sbr, v); ++ W_REG(si->osh, sbr, v); + -+ if(si->memseg) { ++ if (si->memseg) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(si, intr_val); @@ -15141,9 +12213,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + * vars - pointer to a pointer area for "environment" variables + * varsz - pointer to int to return the size of the vars + */ -+sb_t * ++sb_t * +BCMINITFN(sb_attach)(uint devid, osl_t *osh, void *regs, -+ uint bustype, void *sdh, char **vars, int *varsz) ++ uint bustype, void *sdh, char **vars, uint *varsz) +{ + sb_info_t *si; + @@ -15153,10 +12225,11 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return (NULL); + } + -+ if (BCMINIT(sb_doattach)(si, devid, osh, regs, bustype, sdh, vars, varsz) == NULL) { -+ MFREE(osh, si, sizeof (sb_info_t)); ++ if (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, (uint*)varsz) == NULL) { ++ MFREE(osh, si, sizeof(sb_info_t)); + return (NULL); + } ++ + return (sb_t *)si; +} + @@ -15166,43 +12239,64 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* global kernel resource */ +static sb_info_t ksi; ++static bool ksi_attached = FALSE; + +/* generic kernel variant of sb_attach() */ -+sb_t * -+BCMINITFN(sb_kattach)() ++sb_t * ++BCMINITFN(sb_kattach)(void) +{ ++ osl_t *osh = NULL; + uint32 *regs; + -+ if (ksi.curmap == NULL) { ++ if (!ksi_attached) { + uint32 cid; + + regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); -+ cid = R_REG((uint32 *)regs); -+ if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ cid = R_REG(osh, (uint32 *)regs); ++ if (((cid & CID_ID_MASK) == BCM4712_CHIP_ID) && + ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) && + ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) { + uint32 *scc, val; + + scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); -+ val = R_REG(scc); ++ val = R_REG(osh, scc); + SB_ERROR((" initial scc = 0x%x\n", val)); + val |= SCC_SS_XTAL; -+ W_REG(scc, val); ++ W_REG(osh, scc, val); + } + -+ if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, ++ if (sb_doattach(&ksi, BCM4710_DEVICE_ID, osh, (void*)regs, + SB_BUS, NULL, NULL, NULL) == NULL) { + return NULL; + } ++ else ++ ksi_attached = TRUE; + } + + return (sb_t *)&ksi; +} -+#endif ++#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */ ++ ++void ++BCMINITFN(sb_war32414_forceHT)(sb_t *sbh, bool forceHT) ++{ ++ sb_info_t *si; + -+static sb_info_t * ++ si = SB_INFO(sbh); ++ ++ ++ if (FORCEHT_WAR32414(si)) { ++ uint32 val = 0; ++ if (forceHT) ++ val = SYCC_HR; ++ sb_corereg((void*)si, SB_CC_IDX, OFFSETOF(chipcregs_t, system_clk_ctl), ++ SYCC_HR, val); ++ } ++} ++ ++static sb_info_t * +BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, -+ uint bustype, void *sdh, char **vars, int *varsz) ++ uint bustype, void *sdh, char **vars, uint *varsz) +{ + uint origidx; + chipcregs_t *cc; @@ -15211,26 +12305,27 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + ASSERT(GOODREGS(regs)); + -+ bzero((uchar*)si, sizeof (sb_info_t)); ++ bzero((uchar*)si, sizeof(sb_info_t)); + + si->sb.buscoreidx = si->gpioidx = BADIDX; + -+ si->osh = osh; + si->curmap = regs; + si->sdh = sdh; ++ si->osh = osh; + + /* check to see if we are a sb core mimic'ing a pci core */ + if (bustype == PCI_BUS) { -+ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) ++ if (OSL_PCI_READ_CONFIG(si->osh, PCI_SPROM_CONTROL, sizeof(uint32)) == 0xffffffff) { ++ SB_ERROR(("%s: incoming bus is PCI but it's a lie, switching to SB " ++ "devid:0x%x\n", __FUNCTION__, devid)); + bustype = SB_BUS; -+ else -+ bustype = PCI_BUS; ++ } + } + + si->sb.bustype = bustype; + if (si->sb.bustype != BUSTYPE(si->sb.bustype)) { + SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n", -+ si->sb.bustype, BUSTYPE(si->sb.bustype))); ++ si->sb.bustype, BUSTYPE(si->sb.bustype))); + return NULL; + } + @@ -15243,9 +12338,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + sb_clkctl_xtal(&si->sb, XTAL|PLL, ON); + + if (BUSTYPE(si->sb.bustype) == PCI_BUS) { -+ w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32)); ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32)); + if (!GOODCOREADDR(w)) -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32), SB_ENUM_BASE); + } + + /* initialize current core index value */ @@ -15258,7 +12353,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + /* get sonics backplane revision */ + sb = REGS2SB(si->curmap); -+ si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT; ++ si->sb.sonicsrev = (R_SBREG(si, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT; + + /* keep and reuse the initial register mapping */ + origidx = si->curidx; @@ -15274,16 +12369,12 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + /* determine chip id and rev */ + if (cc) { + /* chip common core found! */ -+ si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK; -+ si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; -+ si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; ++ si->sb.chip = R_REG(si->osh, &cc->chipid) & CID_ID_MASK; ++ si->sb.chiprev = (R_REG(si->osh, &cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ si->sb.chippkg = (R_REG(si->osh, &cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; + } else { -+ /* The only pcmcia chip without a chipcommon core is a 4301 */ -+ if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) -+ devid = BCM4301_DEVICE_ID; -+ + /* no chip common core -- must convert device id to chip id */ -+ if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) { ++ if ((si->sb.chip = sb_pcidev2chip(devid)) == 0) { + SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid)); + sb_setcoreidx(&si->sb, origidx); + return NULL; @@ -15295,9 +12386,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + /* determine numcores */ + if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6))) -+ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; ++ si->numcores = (R_REG(si->osh, &cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; + else -+ si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip); ++ si->numcores = sb_chip2numcores(si->sb.chip); + + /* return to original core */ + sb_setcoreidx(&si->sb, origidx); @@ -15306,7 +12397,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + ASSERT(si->sb.chip); + + /* scan for cores */ -+ BCMINIT(sb_scan)(si); ++ sb_scan(si); + + /* fixup necessary chip/core configurations */ + if (BUSTYPE(si->sb.bustype) == PCI_BUS) { @@ -15315,13 +12406,13 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return NULL; + } + } -+ ++ + /* srom_var_init() depends on sb_scan() info */ -+ if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) { ++ if (srom_var_init(si, si->sb.bustype, si->curmap, si->osh, vars, varsz)) { + SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n")); + return (NULL); + } -+ ++ + if (cc == NULL) { + /* + * The chip revision number is hardwired into all @@ -15334,7 +12425,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + ASSERT(vars); + si->sb.chiprev = getintvar(*vars, "chiprev"); + } else if (BUSTYPE(si->sb.bustype) == PCI_BUS) { -+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_REV, sizeof(uint32)); + si->sb.chiprev = w & 0xff; + } else + si->sb.chiprev = 0; @@ -15355,7 +12446,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + switch (BUSTYPE(si->sb.bustype)) { + case PCI_BUS: + /* do a pci config read to get subsystem id and subvendor id */ -+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_SVID, sizeof(uint32)); + si->sb.boardvendor = w & 0xffff; + si->sb.boardtype = (w >> 16) & 0xffff; + break; @@ -15381,16 +12472,21 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + /* setup the GPIO based LED powersave register */ + if (si->sb.ccrev >= 16) { -+ w = getintvar(*vars, "gpiotimerval"); -+ if (!w) -+ w = DEFAULT_GPIOTIMERVAL; ++ if ((vars == NULL) || ((w = getintvar(*vars, "leddc")) == 0)) ++ w = DEFAULT_GPIOTIMERVAL; + sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w); + } ++ if (FORCEHT_WAR32414(si)) { ++ /* set proper clk setup delays before forcing HT */ ++ sb_clkctl_init((void *)si); ++ sb_war32414_forceHT((void *)si, 1); ++ } + + + return (si); +} + ++ +uint +sb_coreid(sb_t *sbh) +{ @@ -15400,7 +12496,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + -+ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); ++ return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); +} + +uint @@ -15428,7 +12524,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + break; + + case PCI_BUS: -+ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); ++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32)); + break; + + case PCMCIA_BUS: { @@ -15468,7 +12564,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + -+ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); ++ return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); +} + +uint @@ -15480,7 +12576,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); -+ sbidh = R_SBREG(si, &(sb)->sbidhigh); ++ sbidh = R_SBREG(si, &sb->sbidhigh); + + return (SBCOREREV(sbidh)); +} @@ -15494,7 +12590,18 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return si->osh; +} + -+#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) ++void ++sb_setosh(sb_t *sbh, osl_t *osh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ if (si->osh != NULL) { ++ SB_ERROR(("osh is already set....\n")); ++ ASSERT(!si->osh); ++ } ++ si->osh = osh; ++} + +/* set/clear sbtmstatelow core-specific flags */ +uint32 @@ -15508,7 +12615,6 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + sb = REGS2SB(si->curmap); + + ASSERT((val & ~mask) == 0); -+ ASSERT((mask & ~SBTML_ALLOW) == 0); + + /* mask and set */ + if (mask || val) { @@ -15517,7 +12623,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + } + + /* return the new value */ -+ return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW); ++ return (R_SBREG(si, &sb->sbtmstatelow)); +} + +/* set/clear sbtmstatehigh core-specific flags */ @@ -15544,31 +12650,27 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK); +} + -+/* caller needs to take care of core-specific bist hazards */ ++/* Run bist on current core. Caller needs to take care of core-specific bist hazards */ +int -+sb_corebist(sb_t *sbh, uint coreid, uint coreunit) ++sb_corebist(sb_t *sbh) +{ + uint32 sblo; -+ uint coreidx; + sb_info_t *si; ++ sbconfig_t *sb; + int result = 0; + + si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ sblo = R_SBREG(si, &sb->sbtmstatelow); ++ W_SBREG(si, &sb->sbtmstatelow, (sblo | SBTML_FGC | SBTML_BE)); + -+ coreidx = sb_findcoreidx(si, coreid, coreunit); -+ if (!GOODIDX(coreidx)) ++ SPINWAIT(((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTD) == 0), 100000); ++ ++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTF) + result = BCME_ERROR; -+ else { -+ sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0); -+ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE)); -+ -+ SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000); -+ -+ if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF) -+ result = BCME_ERROR; + -+ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo); -+ } ++ W_SBREG(si, &sb->sbtmstatelow, sblo); + + return result; +} @@ -15582,32 +12684,75 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + -+ return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK); ++ return ((R_SBREG(si, &sb->sbtmstatelow) & ++ (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK); +} + +/* + * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, + * switch back to the original core, and return the new value. ++ * ++ * When using the silicon backplane, no fidleing with interrupts or core switches are needed. ++ * ++ * Also, when using pci/pcie, we can optimize away the core switching for pci registers ++ * and (on newer pci cores) chipcommon registers. + */ +static uint +sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val) +{ -+ uint origidx; -+ uint32 *r; ++ uint origidx = 0; ++ uint32 *r = NULL; + uint w; + uint intr_val = 0; ++ bool fast = FALSE; + + ASSERT(GOODIDX(coreidx)); + ASSERT(regoff < SB_CORE_SIZE); + ASSERT((val & ~mask) == 0); + -+ INTR_OFF(si, intr_val); ++#ifdef notyet ++ if (si->sb.bustype == SB_BUS) { ++ /* If internal bus, we can always get at everything */ ++ fast = TRUE; ++ r = (uint32 *)((uchar *)si->regs[coreidx] + regoff); ++ } else if (si->sb.bustype == PCI_BUS) { ++ /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */ ++ ++ if ((si->coreid[coreidx] == SB_CC) && ++ ((si->sb.buscoretype == SB_PCIE) || ++ (si->sb.buscorerev >= 13))) { ++ /* Chipc registers are mapped at 12KB */ ++ ++ fast = TRUE; ++ r = (uint32 *)((char *)si->curmap + PCI_16KB0_CCREGS_OFFSET + regoff); ++ } else if (si->sb.buscoreidx == coreidx) { ++ /* pci registers are at either in the last 2KB of an 8KB window ++ * or, in pcie and pci rev 13 at 8KB ++ */ ++ fast = TRUE; ++ if ((si->sb.buscoretype == SB_PCIE) || ++ (si->sb.buscorerev >= 13)) ++ r = (uint32 *)((char *)si->curmap + ++ PCI_16KB0_PCIREGS_OFFSET + regoff); ++ else ++ r = (uint32 *)((char *)si->curmap + ++ ((regoff >= SBCONFIGOFF) ? ++ PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) + ++ regoff); ++ } ++ } ++#endif /* notyet */ + -+ /* save current core index */ -+ origidx = sb_coreidx(&si->sb); ++ if (!fast) { ++ INTR_OFF(si, intr_val); + -+ /* switch core */ -+ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff); ++ /* save current core index */ ++ origidx = sb_coreidx(&si->sb); ++ ++ /* switch core */ ++ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff); ++ } ++ ASSERT(r); + + /* mask and set */ + if (mask || val) { @@ -15615,8 +12760,8 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + w = (R_SBREG(si, r) & ~mask) | val; + W_SBREG(si, r, w); + } else { -+ w = (R_REG(r) & ~mask) | val; -+ W_REG(r, w); ++ w = (R_REG(si->osh, r) & ~mask) | val; ++ W_REG(si->osh, r, w); + } + } + @@ -15624,13 +12769,16 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if (regoff >= SBCONFIGOFF) + w = R_SBREG(si, r); + else -+ w = R_REG(r); ++ w = R_REG(si->osh, r); + -+ /* restore core index */ -+ if (origidx != coreidx) -+ sb_setcoreidx(&si->sb, origidx); ++ if (!fast) { ++ /* restore core index */ ++ if (origidx != coreidx) ++ sb_setcoreidx(&si->sb, origidx); ++ ++ INTR_RESTORE(si, intr_val); ++ } + -+ INTR_RESTORE(si, intr_val); + return (w); +} + @@ -15647,12 +12795,12 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +#define read_pci_cfg_byte(a) \ + (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff) + -+#define read_pci_cfg_write(a) \ ++#define read_pci_cfg_word(a) \ + (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff) + + +/* return TRUE if requested capability exists in the PCI config space */ -+static bool ++static bool +sb_find_pci_capability(sb_info_t *si, uint8 req_cap_id, uchar *buf, uint32 *buflen) +{ + uint8 cap_id; @@ -15663,7 +12811,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if (BUSTYPE(si->sb.bustype) != PCI_BUS) + return FALSE; + -+ /* check for Header type 0*/ ++ /* check for Header type 0 */ + byte_val = read_pci_cfg_byte(PCI_CFG_HDR); + if ((byte_val & 0x7f) != PCI_HEADER_NORMAL) + return FALSE; @@ -15692,7 +12840,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return FALSE; + } + /* found the caller requested capability */ -+ if ((buf != NULL) && (buflen != NULL)) { ++ if ((buf != NULL) && (buflen != NULL)) { + bufsize = *buflen; + if (!bufsize) goto end; + *buflen = 0; @@ -15712,10 +12860,10 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +} + +/* return TRUE if PCIE capability exists the pci config space */ -+static bool ++static inline bool +sb_ispcie(sb_info_t *si) +{ -+ return(sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL)); ++ return (sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL)); +} + +/* scan the sb enumerated space to identify all cores */ @@ -15732,7 +12880,6 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + uint pcierev; + + -+ + /* numcores should already be set */ + ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); + @@ -15752,7 +12899,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + sb_setcoreidx(&si->sb, i); + si->coreid[i] = sb_coreid(&si->sb); + -+ if (si->coreid[i] == SB_PCI) { ++ if (si->coreid[i] == SB_PCI) { + pciidx = i; + pcirev = sb_corerev(&si->sb); + pci = TRUE; @@ -15763,7 +12910,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + } else if (si->coreid[i] == SB_PCMCIA) { + si->sb.buscorerev = sb_corerev(&si->sb); + si->sb.buscoretype = si->coreid[i]; -+ si->sb.buscoreidx = i; ++ si->sb.buscoreidx = i; + } + } + if (pci && pcie) { @@ -15774,13 +12921,12 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + } + if (pci) { + si->sb.buscoretype = SB_PCI; -+ si->sb.buscorerev = pcirev; -+ si->sb.buscoreidx = pciidx; -+ } -+ else if (pcie) { ++ si->sb.buscorerev = pcirev; ++ si->sb.buscoreidx = pciidx; ++ } else if (pcie) { + si->sb.buscoretype = SB_PCIE; -+ si->sb.buscorerev = pcierev; -+ si->sb.buscoreidx = pcieidx; ++ si->sb.buscorerev = pcierev; ++ si->sb.buscoreidx = pcieidx; + } + + /* @@ -15824,9 +12970,11 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + REG_UNMAP(si->regs[idx]); + si->regs[idx] = NULL; + } -+ ++#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS) + if (si != &ksi) -+ MFREE(si->osh, si, sizeof (sb_info_t)); ++#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */ ++ MFREE(si->osh, si, sizeof(sb_info_t)); ++ +} + +/* use pci dev id to determine chip id for chips not having a chipcommon core */ @@ -15834,15 +12982,11 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +BCMINITFN(sb_pcidev2chip)(uint pcidev) +{ + if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) -+ return (BCM4710_DEVICE_ID); -+ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) -+ return (BCM4402_DEVICE_ID); ++ return (BCM4710_CHIP_ID); ++ if ((pcidev >= BCM4402_ENET_ID) && (pcidev <= BCM4402_V90_ID)) ++ return (BCM4402_CHIP_ID); + if (pcidev == BCM4401_ENET_ID) -+ return (BCM4402_DEVICE_ID); -+ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) -+ return (BCM4307_DEVICE_ID); -+ if (pcidev == BCM4301_DEVICE_ID) -+ return (BCM4301_DEVICE_ID); ++ return (BCM4402_CHIP_ID); + + return (0); +} @@ -15851,17 +12995,15 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +static uint +BCMINITFN(sb_chip2numcores)(uint chip) +{ -+ if (chip == BCM4710_DEVICE_ID) ++ if (chip == BCM4710_CHIP_ID) + return (9); -+ if (chip == BCM4402_DEVICE_ID) ++ if (chip == BCM4402_CHIP_ID) + return (3); -+ if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID)) -+ return (5); -+ if (chip == BCM4306_DEVICE_ID) /* < 4306c0 */ ++ if (chip == BCM4306_CHIP_ID) /* < 4306c0 */ + return (6); -+ if (chip == BCM4704_DEVICE_ID) ++ if (chip == BCM4704_CHIP_ID) + return (9); -+ if (chip == BCM5365_DEVICE_ID) ++ if (chip == BCM5365_CHIP_ID) + return (7); + + SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); @@ -15871,7 +13013,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return index of coreid or BADIDX if not found */ +static uint -+sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit) ++sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit) +{ + uint found; + uint i; @@ -15889,7 +13031,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +} + +/* -+ * this function changes logical "focus" to the indiciated core, ++ * this function changes logical "focus" to the indiciated core, + * must be called with interrupt off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ @@ -15904,7 +13046,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + if (coreidx >= si->numcores) + return (NULL); -+ ++ + /* + * If the user has provided an interrupt mask enabled function, + * then assert interrupts are disabled before switching the core. @@ -15954,7 +13096,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +} + +/* -+ * this function changes logical "focus" to the indiciated core, ++ * this function changes logical "focus" to the indiciated core, + * must be called with interrupt off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ @@ -15974,7 +13116,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return chip number */ +uint -+BCMINITFN(sb_chip)(sb_t *sbh) ++sb_chip(sb_t *sbh) +{ + sb_info_t *si; + @@ -15984,7 +13126,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return chip revision number */ +uint -+BCMINITFN(sb_chiprev)(sb_t *sbh) ++sb_chiprev(sb_t *sbh) +{ + sb_info_t *si; + @@ -15994,7 +13136,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return chip common revision number */ +uint -+BCMINITFN(sb_chipcrev)(sb_t *sbh) ++sb_chipcrev(sb_t *sbh) +{ + sb_info_t *si; + @@ -16004,7 +13146,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return chip package option */ +uint -+BCMINITFN(sb_chippkg)(sb_t *sbh) ++sb_chippkg(sb_t *sbh) +{ + sb_info_t *si; + @@ -16014,7 +13156,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return PCI core rev. */ +uint -+BCMINITFN(sb_pcirev)(sb_t *sbh) ++sb_pcirev(sb_t *sbh) +{ + sb_info_t *si; + @@ -16032,7 +13174,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return (PCI(si) && (si->sb.buscorerev <= 10)); +} + -+static void ++static void +BCMINITFN(sb_war30841)(sb_info_t *si) +{ + sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128); @@ -16052,7 +13194,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return board vendor id */ +uint -+BCMINITFN(sb_boardvendor)(sb_t *sbh) ++sb_boardvendor(sb_t *sbh) +{ + sb_info_t *si; + @@ -16062,7 +13204,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* return boardtype */ +uint -+BCMINITFN(sb_boardtype)(sb_t *sbh) ++sb_boardtype(sb_t *sbh) +{ + sb_info_t *si; + char *var; @@ -16136,7 +13278,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + si = SB_INFO(sbh); + -+ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); ++ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof(uint))); + return (si->numcores); +} + @@ -16173,14 +13315,14 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); + + /* do the buffer registers update */ -+ W_REG(&ccregs->broadcastaddress, SB_COMMIT); -+ W_REG(&ccregs->broadcastdata, 0x0); ++ W_REG(si->osh, &ccregs->broadcastaddress, SB_COMMIT); ++ W_REG(si->osh, &ccregs->broadcastdata, 0x0); + } else if (PCI(si)) { + sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); + + /* do the buffer registers update */ -+ W_REG(&pciregs->bcastaddr, SB_COMMIT); -+ W_REG(&pciregs->bcastdata, 0x0); ++ W_REG(si->osh, &pciregs->bcastaddr, SB_COMMIT); ++ W_REG(si->osh, &pciregs->bcastdata, 0x0); + } else + ASSERT(0); + @@ -16189,9 +13331,13 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + INTR_RESTORE(si, intr_val); +} + -+/* reset and re-enable a core */ ++/* reset and re-enable a core ++ * inputs: ++ * bits - core specific bits that are set during and after reset sequence ++ * resetbits - core specific bits that are set only during reset sequence ++ */ +void -+sb_core_reset(sb_t *sbh, uint32 bits) ++sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -16204,14 +13350,14 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + /* + * Must do the disable sequence first to work for arbitrary current core state. + */ -+ sb_core_disable(sbh, bits); ++ sb_core_disable(sbh, (bits | resetbits)); + + /* + * Now do the initialization sequence. + */ + + /* set reset while enabling the clock and forcing them on throughout the core */ -+ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits | resetbits)); + dummy = R_SBREG(si, &sb->sbtmstatelow); + OSL_DELAY(1); + @@ -16241,7 +13387,8 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + si = SB_INFO(sbh); + -+ if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) || (PCI(si) && (si->sb.buscorerev >= 5)) ) ++ if ((BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) || ++ (PCI(si) && (si->sb.buscorerev >= 5))) + return; + + ASSERT(GOODREGS(si->curmap)); @@ -16249,13 +13396,13 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + if (BUSTYPE(si->sb.bustype) == SB_BUS) { + SET_SBREG(si, &sb->sbimconfiglow, -+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); + } else { + if (sb_coreid(sbh) == SB_PCI) { + SET_SBREG(si, &sb->sbimconfiglow, -+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + } else { + SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); + } @@ -16306,7 +13453,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + idx = BADIDX; + switch (BUSTYPE(si->sb.bustype)) { + case PCI_BUS: -+ idx = si->sb.buscoreidx; ++ idx = si->sb.buscoreidx; + break; + case JTAG_BUS: + idx = SB_CC_IDX; @@ -16372,8 +13519,10 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + dummy = R_SBREG(si, &sb->sbtmstatelow); + OSL_DELAY(1); + SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000); ++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY) ++ SB_ERROR(("%s: target state still busy\n", __FUNCTION__)); + -+ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) { ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) { + OR_SBREG(si, &sb->sbimstate, SBIM_RJ); + dummy = R_SBREG(si, &sb->sbimstate); + OSL_DELAY(1); @@ -16401,10 +13550,28 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +{ + sb_info_t *si = SB_INFO(sbh); + ++ /* make sure we come up in fast clock mode */ ++ sb_clkctl_clk(sbh, CLK_FAST); ++ + /* instant NMI */ + switch (si->gpioid) { + case SB_CC: ++#ifdef __mips__ ++ if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1) ++ MTC0(C0_BROADCOM, 4, (1 << 22)); ++#endif /* __mips__ */ + sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); ++#ifdef __mips__ ++ if (sb_chip(sbh) == BCM4785_CHIP_ID && ticks <= 1) { ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); ++ while (1); ++ } ++#endif /* __mips__ */ + break; + case SB_EXTIF: + sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); @@ -16417,21 +13584,14 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +sb_pcmcia_init(sb_t *sbh) +{ + sb_info_t *si; -+ uint8 cor; ++ uint8 cor = 0; + + si = SB_INFO(sbh); + + /* enable d11 mac interrupts */ -+ if (si->sb.chip == BCM4301_DEVICE_ID) { -+ /* Have to use FCR2 in 4301 */ -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); -+ } else { -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ } ++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); ++ cor |= COR_IRQEN | COR_FUNEN; ++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); + +} + @@ -16441,7 +13601,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + * coremask is the bitvec of cores by index to be enabled. + */ +void -+sb_pci_setup(sb_t *sbh, uint coremask) ++BCMINITFN(sb_pci_setup)(sb_t *sbh, uint coremask) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -16487,9 +13647,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + } + + if (PCI(si)) { -+ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); ++ OR_REG(si->osh, &pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); + if (si->sb.buscorerev >= 11) -+ OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI); ++ OR_REG(si->osh, &pciregs->sbtopci2, SBTOPCI_RC_READMULTI); + if (si->sb.buscorerev < 5) { + SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); @@ -16497,17 +13657,28 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + } + } + -+ if (PCIE(si) && (si->sb.buscorerev == 0)) { -+ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG); -+ reg_val |= 0x8; -+ sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG, reg_val); ++#ifdef PCIE_SUPPOER ++ /* PCIE workarounds */ ++ if (PCIE(si)) { ++ if ((si->sb.buscorerev == 0) || (si->sb.buscorerev == 1)) { ++ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, ++ PCIE_TLP_WORKAROUNDSREG); ++ reg_val |= 0x8; ++ sb_pcie_writereg((void *)sbh, (void *)PCIE_PCIEREGS, ++ PCIE_TLP_WORKAROUNDSREG, reg_val); ++ } + -+ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG); -+ reg_val &= ~(0x40); -+ sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val); ++ if (si->sb.buscorerev == 1) { ++ reg_val = sb_pcie_readreg((void *)sbh, (void *)PCIE_PCIEREGS, ++ PCIE_DLLP_LCREG); ++ reg_val |= (0x40); ++ sb_pcie_writereg(sbh, (void *)PCIE_PCIEREGS, PCIE_DLLP_LCREG, reg_val); ++ } + -+ BCMINIT(sb_war30841)(si); ++ if (si->sb.buscorerev == 0) ++ sb_war30841(si); + } ++#endif + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); @@ -16616,9 +13787,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + else + return CC_T6_M0; + } else if ((pll_type == PLL_TYPE1) || -+ (pll_type == PLL_TYPE3) || -+ (pll_type == PLL_TYPE4) || -+ (pll_type == PLL_TYPE7)) { ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { + n1 = factor6(n1); + n2 += CC_F5_BIAS; + } else if (pll_type == PLL_TYPE2) { @@ -16632,10 +13803,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + ASSERT(0); + /* PLL types 3 and 7 use BASE2 (25Mhz) */ + if ((pll_type == PLL_TYPE3) || -+ (pll_type == PLL_TYPE7)) { ++ (pll_type == PLL_TYPE7)) { + clock = CC_CLOCK_BASE2 * n1 * n2; -+ } -+ else ++ } else + clock = CC_CLOCK_BASE1 * n1 * n2; + + if (clock == 0) @@ -16682,7 +13852,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if ((mc & CC_T2MC_M3BYP) == 0) + clock /= m3; + -+ return(clock); ++ return (clock); + } +} + @@ -16706,37 +13876,32 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ n = R_REG(&eir->clockcontrol_n); -+ m = R_REG(&eir->clockcontrol_sb); ++ n = R_REG(si->osh, &eir->clockcontrol_n); ++ m = R_REG(si->osh, &eir->clockcontrol_sb); + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; -+ n = R_REG(&cc->clockcontrol_n); -+ if (pll_type == PLL_TYPE6) -+ m = R_REG(&cc->clockcontrol_mips); -+ else if (pll_type == PLL_TYPE3) -+ { -+ // Added by Chen-I for 5365 -+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) -+ m = R_REG(&cc->clockcontrol_sb); -+ else -+ m = R_REG(&cc->clockcontrol_m2); ++ pll_type = R_REG(si->osh, &cc->capabilities) & CAP_PLL_MASK; ++ if (pll_type == PLL_NONE) { ++ INTR_RESTORE(si, intr_val); ++ return 80000000; + } ++ n = R_REG(si->osh, &cc->clockcontrol_n); ++ if (pll_type == PLL_TYPE6) ++ m = R_REG(si->osh, &cc->clockcontrol_m3); ++ else if ((pll_type == PLL_TYPE3) && !(BCMINIT(sb_chip)(sbh) == 0x5365)) ++ m = R_REG(si->osh, &cc->clockcontrol_m2); + else -+ m = R_REG(&cc->clockcontrol_sb); ++ m = R_REG(si->osh, &cc->clockcontrol_sb); + } else { + INTR_RESTORE(si, intr_val); + return 0; + } + -+ // Added by Chen-I for 5365 -+ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) -+ { ++ /* calculate rate */ ++ if (BCMINIT(sb_chip)(sbh) == 0x5365) + rate = 100000000; -+ } -+ else -+ { -+ /* calculate rate */ ++ else { + rate = sb_clock_rate(pll_type, n, m); ++ + if (pll_type == PLL_TYPE3) + rate = rate / 2; + } @@ -16877,8 +14042,10 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ -+ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ /* only cores on SB_BUS share GPIO's and only applcation users need to ++ * reserve/release GPIO ++ */ ++ if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { + ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); + return -1; + } @@ -16899,7 +14066,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + +/* release one gpio */ +/* -+ * releasing the gpio doesn't change the current value on the GPIO last write value ++ * releasing the gpio doesn't change the current value on the GPIO last write value + * persists till some one overwrites it +*/ + @@ -16912,8 +14079,10 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ -+ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ /* only cores on SB_BUS share GPIO's and only applcation users need to ++ * reserve/release GPIO ++ */ ++ if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { + ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); + return -1; + } @@ -16922,7 +14091,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); + return -1; + } -+ ++ + /* already released */ + if (!(sb_gpioreservation & gpio_bitmask)) + return -1; @@ -17045,11 +14214,11 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return -1; + + /* gpio led powersave reg */ -+ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val)); ++ return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val)); +} + -+/* mask&set gpio timer val */ -+uint32 ++/* mask & set gpio timer val */ ++uint32 +sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval) +{ + sb_info_t *si; @@ -17058,7 +14227,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if (si->sb.ccrev < 16) + return -1; + -+ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval)); ++ return (sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval)); +} + + @@ -17072,14 +14241,15 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + ASSERT(sb_coreid(&si->sb) == SB_CC); + + if (si->sb.ccrev < 6) { -+ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) -+ && (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS)) ++ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) && ++ (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32)) & ++ PCI_CFG_GPIO_SCS)) + return (SCC_SS_PCI); + else + return (SCC_SS_XTAL); + } else if (si->sb.ccrev < 10) { + cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); -+ return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK); ++ return (R_REG(si->osh, &cc->slow_clk_ctl) & SCC_SS_MASK); + } else /* Insta-clock */ + return (SCC_SS_XTAL); +} @@ -17098,7 +14268,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); + + /* shouldn't be here unless we've established the chip has dynamic clk control */ -+ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); ++ ASSERT(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL); + + slowclk = sb_slowclk_src(si); + if (si->sb.ccrev < 6) { @@ -17107,7 +14277,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + else + return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); + } else if (si->sb.ccrev < 10) { -+ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ div = 4 * (((R_REG(si->osh, &cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); + if (slowclk == SCC_SS_LPO) + return (max? LPOMAXFREQ : LPOMINFREQ); + else if (slowclk == SCC_SS_XTAL) @@ -17118,7 +14288,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + ASSERT(0); + } else { + /* Chipc rev 10 is InstaClock */ -+ div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT; ++ div = R_REG(si->osh, &cc->system_clk_ctl) >> SYCC_CD_SHIFT; + div = 4 * (div + 1); + return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); + } @@ -17126,7 +14296,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +} + +static void -+sb_clkctl_setdelay(sb_info_t *si, void *chipcregs) ++BCMINITFN(sb_clkctl_setdelay)(sb_info_t *si, void *chipcregs) +{ + chipcregs_t * cc; + uint slowmaxfreq, pll_delay, slowclk; @@ -17137,67 +14307,25 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + /* If the slow clock is not sourced by the xtal then add the xtal_on_delay + * since the xtal will also be powered down by dynamic clk control logic. + */ -+ slowclk = sb_slowclk_src(si); -+ if (slowclk != SCC_SS_XTAL) -+ pll_delay += XTAL_ON_DELAY; -+ -+ /* Starting with 4318 it is ILP that is used for the delays */ -+ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE); -+ -+ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; -+ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; -+ -+ cc = (chipcregs_t *)chipcregs; -+ W_REG(&cc->pll_on_delay, pll_on_delay); -+ W_REG(&cc->fref_sel_delay, fref_sel_delay); -+} -+ -+int -+sb_pwrctl_slowclk(void *sbh, bool set, uint *div) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ uint intr_val = 0; -+ uint err = 0; -+ -+ si = SB_INFO(sbh); -+ -+ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ -+ if (si->sb.ccrev < 6) -+ return 1; -+ -+ /* chipcommon cores rev10 are a whole new ball game */ -+ if (si->sb.ccrev >= 10) -+ return 1; -+ -+ if (set && ((*div % 4) || (*div < 4))) -+ return 2; -+ -+ INTR_OFF(si, intr_val); -+ origidx = si->curidx; -+ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); -+ ASSERT(cc != NULL); -+ -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) { -+ err = 3; -+ goto done; -+ } + -+ if (set) { -+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT)); -+ sb_clkctl_setdelay(sbh, (void *)cc); -+ } else -+ *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ slowclk = sb_slowclk_src(si); ++ if (slowclk != SCC_SS_XTAL) ++ pll_delay += XTAL_ON_DELAY; + -+done: -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+ return err; ++ /* Starting with 4318 it is ILP that is used for the delays */ ++ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE); ++ ++ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; ++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; ++ ++ cc = (chipcregs_t *)chipcregs; ++ W_REG(si->osh, &cc->pll_on_delay, pll_on_delay); ++ W_REG(si->osh, &cc->fref_sel_delay, fref_sel_delay); +} + +/* initialize power control delay registers */ -+void sb_clkctl_init(sb_t *sbh) ++void ++BCMINITFN(sb_clkctl_init)(sb_t *sbh) +{ + sb_info_t *si; + uint origidx; @@ -17210,26 +14338,24 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) + return; + -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) -+ goto done; ++ if ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev < 2)) ++ W_REG(si->osh, &cc->chipcontrol, ++ (si->sb.chiprev == 0) ? CHIPCTRL_4321A0_DEFAULT : CHIPCTRL_4321A1_DEFAULT); + -+ /* 4317pc does not work with SlowClock less than 5 MHz */ -+ if ((BUSTYPE(si->sb.bustype) == PCMCIA_BUS) && (si->sb.ccrev >= 6) && (si->sb.ccrev < 10)) -+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (ILP_DIV_5MHZ << SCC_CD_SHIFT)); ++ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL)) ++ goto done; + + /* set all Instaclk chip ILP to 1 MHz */ + else if (si->sb.ccrev >= 10) -+ SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); -+ ++ SET_REG(si->osh, &cc->system_clk_ctl, SYCC_CD_MASK, ++ (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ++ + sb_clkctl_setdelay(si, (void *)cc); + +done: + sb_setcoreidx(sbh, origidx); +} -+void sb_pwrctl_init(sb_t *sbh) -+{ -+sb_clkctl_init(sbh); -+} ++ +/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ +uint16 +sb_clkctl_fast_pwrup_delay(sb_t *sbh) @@ -17250,21 +14376,19 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) + goto done; + -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL)) + goto done; + + slowminfreq = sb_slowclk_freq(si, FALSE); -+ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; ++ fpdelay = (((R_REG(si->osh, &cc->pll_on_delay) + 2) * 1000000) + ++ (slowminfreq - 1)) / slowminfreq; + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return (fpdelay); +} -+uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh) -+{ -+return sb_clkctl_fast_pwrup_delay(sbh); -+} ++ +/* turn primary xtal and/or pll off/on */ +int +sb_clkctl_xtal(sb_t *sbh, uint what, bool on) @@ -17287,9 +14411,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if (PCIE(si)) + return -1; + -+ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); -+ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); -+ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); ++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof(uint32)); ++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32)); ++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32)); + + /* + * Avoid glitching the clock if GPRS is already using it. @@ -17310,15 +14434,18 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + out |= PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, ++ sizeof(uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, ++ sizeof(uint32), outen); + OSL_DELAY(XTAL_ON_DELAY); + } + + /* turn pll on */ + if (what & PLL) { + out &= ~PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, ++ sizeof(uint32), out); + OSL_DELAY(2000); + } + } else { @@ -17326,8 +14453,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + out &= ~PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof(uint32), ++ outen); + } + + default: @@ -17337,13 +14465,8 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return (0); +} + -+int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on) -+{ -+return sb_clkctl_xtal(sbh,what,on); -+} -+ +/* set dynamic clk control mode (forceslow, forcefast, dynamic) */ -+/* returns true if ignore pll off is set and false if it is not */ ++/* returns true if we are forcing fast clock */ +bool +sb_clkctl_clk(sb_t *sbh, uint mode) +{ @@ -17351,7 +14474,6 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + uint origidx; + chipcregs_t *cc; + uint32 scc; -+ bool forcefastclk=FALSE; + uint intr_val = 0; + + si = SB_INFO(sbh); @@ -17360,60 +14482,73 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + if (si->sb.ccrev < 6) + return (FALSE); + -+ /* chipcommon cores rev10 are a whole new ball game */ -+ if (si->sb.ccrev >= 10) -+ return (FALSE); ++ ++ /* Chips with ccrev 10 are EOL and they don't have SYCC_HR which we use below */ ++ ASSERT(si->sb.ccrev != 10); + + INTR_OFF(si, intr_val); + + origidx = si->curidx; + ++ if (sb_setcore(sbh, SB_MIPS33, 0) && (sb_corerev(&si->sb) <= 7) && ++ (BUSTYPE(si->sb.bustype) == SB_BUS) && (si->sb.ccrev >= 10)) ++ goto done; ++ ++ /* PR32414WAR "Force HT clock on" all the time, no dynamic clk ctl */ ++ if ((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev <= 1)) ++ goto done; ++ + cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); + ASSERT(cc != NULL); + -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ if (!(R_REG(si->osh, &cc->capabilities) & CAP_PWR_CTL)) + goto done; + + switch (mode) { + case CLK_FAST: /* force fast (pll) clock */ -+ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ -+ sb_clkctl_xtal(&si->sb, XTAL, ON); ++ if (si->sb.ccrev < 10) { ++ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ ++ sb_clkctl_xtal(&si->sb, XTAL, ON); + -+ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); ++ SET_REG(si->osh, &cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); ++ } else ++ OR_REG(si->osh, &cc->system_clk_ctl, SYCC_HR); ++ /* wait for the PLL */ ++ OSL_DELAY(PLL_DELAY); + break; + + case CLK_DYNAMIC: /* enable dynamic clock control */ -+ scc = R_REG(&cc->slow_clk_ctl); -+ scc &= ~(SCC_FS | SCC_IP | SCC_XC); -+ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) -+ scc |= SCC_XC; -+ W_REG(&cc->slow_clk_ctl, scc); -+ -+ /* for dynamic control, we have to release our xtal_pu "force on" */ -+ if (scc & SCC_XC) -+ sb_clkctl_xtal(&si->sb, XTAL, OFF); ++ ++ if (si->sb.ccrev < 10) { ++ scc = R_REG(si->osh, &cc->slow_clk_ctl); ++ scc &= ~(SCC_FS | SCC_IP | SCC_XC); ++ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) ++ scc |= SCC_XC; ++ W_REG(si->osh, &cc->slow_clk_ctl, scc); ++ ++ /* for dynamic control, we have to release our xtal_pu "force on" */ ++ if (scc & SCC_XC) ++ sb_clkctl_xtal(&si->sb, XTAL, OFF); ++ } else { ++ /* Instaclock */ ++ AND_REG(si->osh, &cc->system_clk_ctl, ~SYCC_HR); ++ } + break; + + default: + ASSERT(0); + } + -+ /* Is the h/w forcing the use of the fast clk */ -+ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); -+ +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); -+ return (forcefastclk); ++ return (mode == CLK_FAST); +} + -+bool sb_pwrctl_clk(sb_t *sbh, uint mode) -+{ -+return sb_clkctl_clk(sbh, mode); -+} +/* register driver interrupt disabling and restoring callback functions */ +void -+sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg) ++sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, ++ void *intrsenabled_fn, void *intr_arg) +{ + sb_info_t *si; + @@ -17429,29 +14564,41 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h +} + + -+void -+sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, -+ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif) ++int ++sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif, ++ uint8 *pciheader) +{ -+ uint vendor, core, unit; ++ uint16 vendor = 0xffff, device = 0xffff; ++ uint core, unit; + uint chip, chippkg; -+ char varname[8]; ++ uint nfunc; ++ char varname[SB_DEVPATH_BUFSZ + 8]; + uint8 class, subclass, progif; -+ -+ vendor = sb_corevendor(sbh); ++ char devpath[SB_DEVPATH_BUFSZ]; ++ uint8 header; ++ + core = sb_coreid(sbh); + unit = sb_coreunit(sbh); + -+ chip = BCMINIT(sb_chip)(sbh); -+ chippkg = BCMINIT(sb_chippkg)(sbh); ++ chip = sb_chip(sbh); ++ chippkg = sb_chippkg(sbh); + + progif = 0; -+ ++ header = PCI_HEADER_NORMAL; ++ ++ /* Verify whether the function exists for the core */ ++ nfunc = (core == SB_USB20H) ? 2 : 1; ++ if (func >= nfunc) ++ return BCME_ERROR; ++ + /* Known vendor translations */ -+ switch (vendor) { ++ switch (sb_corevendor(sbh)) { + case SB_VEND_BCM: + vendor = VENDOR_BROADCOM; + break; ++ default: ++ return BCME_ERROR; + } + + /* Determine class based on known core codes */ @@ -17459,97 +14606,144 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + case SB_ILINE20: + class = PCI_CLASS_NET; + subclass = PCI_NET_ETHER; -+ core = BCM47XX_ILINE_ID; ++ device = BCM47XX_ILINE_ID; + break; + case SB_ENET: + class = PCI_CLASS_NET; + subclass = PCI_NET_ETHER; -+ core = BCM47XX_ENET_ID; ++ device = BCM47XX_ENET_ID; ++ break; ++ case SB_GIGETH: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ device = BCM47XX_GIGETH_ID; + break; + case SB_SDRAM: + case SB_MEMC: + class = PCI_CLASS_MEMORY; + subclass = PCI_MEMORY_RAM; ++ device = (uint16)core; + break; + case SB_PCI: + case SB_PCIE: + class = PCI_CLASS_BRIDGE; + subclass = PCI_BRIDGE_PCI; ++ device = (uint16)core; ++ header = PCI_HEADER_BRIDGE; + break; + case SB_MIPS: + case SB_MIPS33: + class = PCI_CLASS_CPU; + subclass = PCI_CPU_MIPS; ++ device = (uint16)core; + break; + case SB_CODEC: + class = PCI_CLASS_COMM; + subclass = PCI_COMM_MODEM; -+ core = BCM47XX_V90_ID; ++ device = BCM47XX_V90_ID; + break; + case SB_USB: + class = PCI_CLASS_SERIAL; + subclass = PCI_SERIAL_USB; + progif = 0x10; /* OHCI */ -+ core = BCM47XX_USB_ID; ++ device = BCM47XX_USB_ID; + break; + case SB_USB11H: + class = PCI_CLASS_SERIAL; + subclass = PCI_SERIAL_USB; + progif = 0x10; /* OHCI */ -+ core = BCM47XX_USBH_ID; ++ device = BCM47XX_USBH_ID; ++ break; ++ case SB_USB20H: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = func == 0 ? 0x10 : 0x20; /* OHCI/EHCI */ ++ device = BCM47XX_USB20H_ID; ++ header = 0x80; /* multifunction */ + break; + case SB_USB11D: + class = PCI_CLASS_SERIAL; + subclass = PCI_SERIAL_USB; -+ core = BCM47XX_USBD_ID; ++ device = BCM47XX_USBD_ID; ++ break; ++ case SB_USB20D: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ device = BCM47XX_USB20D_ID; + break; + case SB_IPSEC: + class = PCI_CLASS_CRYPT; + subclass = PCI_CRYPT_NETWORK; -+ core = BCM47XX_IPSEC_ID; ++ device = BCM47XX_IPSEC_ID; + break; + case SB_ROBO: + class = PCI_CLASS_NET; + subclass = PCI_NET_OTHER; -+ core = BCM47XX_ROBO_ID; ++ device = BCM47XX_ROBO_ID; + break; + case SB_EXTIF: + case SB_CC: + class = PCI_CLASS_MEMORY; + subclass = PCI_MEMORY_FLASH; ++ device = (uint16)core; + break; + case SB_D11: + class = PCI_CLASS_NET; + subclass = PCI_NET_OTHER; -+ /* Let an nvram variable override this */ ++ /* Let nvram variable override core ID */ ++ sb_devpath(sbh, devpath, sizeof(devpath)); ++ sprintf(varname, "%sdevid", devpath); ++ if ((device = (uint16)getintvar(NULL, varname))) ++ break; ++ /* ++ * no longer support wl%did, but keep the code ++ * here for backward compatibility. ++ */ + sprintf(varname, "wl%did", unit); -+ if ((core = getintvar(NULL, varname)) == 0) { -+ if (chip == BCM4712_DEVICE_ID) { -+ if (chippkg == BCM4712SMALL_PKG_ID) -+ core = BCM4306_D11G_ID; -+ else -+ core = BCM4306_D11DUAL_ID; -+ } ++ if ((device = (uint16)getintvar(NULL, varname))) ++ break; ++ /* Chip specific conversion */ ++ if (chip == BCM4712_CHIP_ID) { ++ if (chippkg == BCM4712SMALL_PKG_ID) ++ device = BCM4306_D11G_ID; ++ else ++ device = BCM4306_D11DUAL_ID; ++ break; + } ++ /* ignore it */ ++ device = 0xffff; ++ break; ++ case SB_SATAXOR: ++ class = PCI_CLASS_XOR; ++ subclass = PCI_XOR_QDMA; ++ device = BCM47XX_SATAXOR_ID; ++ break; ++ case SB_ATA100: ++ class = PCI_CLASS_DASDI; ++ subclass = PCI_DASDI_IDE; ++ device = BCM47XX_ATA100_ID; + break; + + default: + class = subclass = progif = 0xff; ++ device = (uint16)core; + break; + } + -+ *pcivendor = (uint16)vendor; -+ *pcidevice = (uint16)core; ++ *pcivendor = vendor; ++ *pcidevice = device; + *pciclass = class; + *pcisubclass = subclass; + *pciprogif = progif; -+} ++ *pciheader = header; + ++ return 0; ++} + + + +/* use the mdio interface to write to mdio slaves */ -+static int ++static int +sb_pcie_mdiowrite(sb_info_t *si, uint physmedia, uint regaddr, uint val) +{ + uint mdiodata; @@ -17557,24 +14751,24 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + sbpcieregs_t *pcieregs; + + pcieregs = (sbpcieregs_t*) sb_setcoreidx(&si->sb, si->sb.buscoreidx); -+ ASSERT (pcieregs); ++ ASSERT(pcieregs); + -+ /* enable mdio access to SERDES */ -+ W_REG((&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL); ++ /* enable mdio access to SERDES */ ++ W_REG(si->osh, (&pcieregs->mdiocontrol), MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL); + -+ mdiodata = MDIODATA_START | MDIODATA_WRITE | ++ mdiodata = MDIODATA_START | MDIODATA_WRITE | + (physmedia << MDIODATA_DEVADDR_SHF) | + (regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val; + -+ W_REG((&pcieregs->mdiodata), mdiodata); ++ W_REG(si->osh, (&pcieregs->mdiodata), mdiodata); + + PR28829_DELAY(); + + /* retry till the transaction is complete */ -+ while ( i < 10 ) { -+ if (R_REG(&(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) { -+ /* Disable mdio access to SERDES */ -+ W_REG((&pcieregs->mdiocontrol), 0); ++ while (i < 10) { ++ if (R_REG(si->osh, &(pcieregs->mdiocontrol)) & MDIOCTL_ACCESS_DONE) { ++ /* Disable mdio access to SERDES */ ++ W_REG(si->osh, (&pcieregs->mdiocontrol), 0); + return 0; + } + OSL_DELAY(1000); @@ -17582,87 +14776,86 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + } + + SB_ERROR(("sb_pcie_mdiowrite: timed out\n")); -+ /* Disable mdio access to SERDES */ -+ W_REG((&pcieregs->mdiocontrol), 0); ++ /* Disable mdio access to SERDES */ ++ W_REG(si->osh, (&pcieregs->mdiocontrol), 0); + ASSERT(0); -+ return 1; ++ return 1; + +} + -+/* indirect way to read pcie config regs*/ -+uint ++/* indirect way to read pcie config regs */ ++uint +sb_pcie_readreg(void *sb, void* arg1, uint offset) +{ + sb_info_t *si; + sb_t *sbh; + uint retval = 0xFFFFFFFF; -+ sbpcieregs_t *pcieregs; ++ sbpcieregs_t *pcieregs; + uint addrtype; + + sbh = (sb_t *)sb; + si = SB_INFO(sbh); -+ ASSERT (PCIE(si)); ++ ASSERT(PCIE(si)); + + pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0); -+ ASSERT (pcieregs); ++ ASSERT(pcieregs); + + addrtype = (uint)((uintptr)arg1); -+ switch(addrtype) { ++ switch (addrtype) { + case PCIE_CONFIGREGS: -+ W_REG((&pcieregs->configaddr),offset); -+ retval = R_REG(&(pcieregs->configdata)); ++ W_REG(si->osh, (&pcieregs->configaddr), offset); ++ retval = R_REG(si->osh, &(pcieregs->configdata)); + break; + case PCIE_PCIEREGS: -+ W_REG(&(pcieregs->pcieaddr),offset); -+ retval = R_REG(&(pcieregs->pciedata)); ++ W_REG(si->osh, &(pcieregs->pcieaddr), offset); ++ retval = R_REG(si->osh, &(pcieregs->pciedata)); + break; + default: -+ ASSERT(0); ++ ASSERT(0); + break; + } + return retval; +} + -+/* indirect way to write pcie config/mdio/pciecore regs*/ -+uint ++/* indirect way to write pcie config/mdio/pciecore regs */ ++uint +sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val) +{ + sb_info_t *si; -+ sbpcieregs_t *pcieregs; ++ sbpcieregs_t *pcieregs; + uint addrtype; + + si = SB_INFO(sbh); -+ ASSERT (PCIE(si)); ++ ASSERT(PCIE(si)); + + pcieregs = (sbpcieregs_t *)sb_setcore(sbh, SB_PCIE, 0); -+ ASSERT (pcieregs); ++ ASSERT(pcieregs); + + addrtype = (uint)((uintptr)arg1); + -+ switch(addrtype) { ++ switch (addrtype) { + case PCIE_CONFIGREGS: -+ W_REG((&pcieregs->configaddr),offset); -+ W_REG((&pcieregs->configdata),val); ++ W_REG(si->osh, (&pcieregs->configaddr), offset); ++ W_REG(si->osh, (&pcieregs->configdata), val); + break; + case PCIE_PCIEREGS: -+ W_REG((&pcieregs->pcieaddr),offset); -+ W_REG((&pcieregs->pciedata),val); ++ W_REG(si->osh, (&pcieregs->pcieaddr), offset); ++ W_REG(si->osh, (&pcieregs->pciedata), val); + break; + default: -+ ASSERT(0); ++ ASSERT(0); + break; + } + return 0; +} + -+ +/* Build device path. Support SB, PCI, and JTAG for now. */ +int +sb_devpath(sb_t *sbh, char *path, int size) +{ + ASSERT(path); + ASSERT(size >= SB_DEVPATH_BUFSZ); -+ ++ + switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) { + case SB_BUS: + case JTAG_BUS: @@ -17690,7 +14883,10 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return 0; +} + -+/* Fix chip's configuration. The current core may be changed upon return */ ++/* ++ * Fixup SROMless PCI device's configuration. ++ * The current core may be changed upon return. ++ */ +static int +sb_pci_fixcfg(sb_info_t *si) +{ @@ -17703,7 +14899,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + + ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS); + -+ /* Fix PCI(e) SROM shadow area */ ++ /* Fixup PI in SROM shadow area to enable the correct PCI core access */ + /* save the current index */ + origidx = sb_coreidx(&si->sb); + @@ -17712,28 +14908,29 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + pcieregs = (sbpcieregs_t *)sb_setcore(&si->sb, SB_PCIE, 0); + ASSERT(pcieregs); + reg16 = &pcieregs->sprom[SRSH_PI_OFFSET]; -+ } -+ else if (si->sb.buscoretype == SB_PCI) { ++ } else if (si->sb.buscoretype == SB_PCI) { + pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0); + ASSERT(pciregs); + reg16 = &pciregs->sprom[SRSH_PI_OFFSET]; -+ } -+ else { ++ } else { + ASSERT(0); + return -1; + } + pciidx = sb_coreidx(&si->sb); -+ val16 = R_REG(reg16); ++ val16 = R_REG(si->osh, reg16); + if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) { + val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK); -+ W_REG(reg16, val16); ++ W_REG(si->osh, reg16, val16); + } + + /* restore the original index */ + sb_setcoreidx(&si->sb, origidx); -+ -+ /* Fix bar0window */ -+ /* !do it last, it changes the current core! */ ++ ++ /* ++ * Fixup bar0window in PCI config space to make the core indicated ++ * by the nvram variable the current core. ++ * !Do it last, it may change the current core! ++ */ + if (sb_devpath(&si->sb, devpath, sizeof(devpath))) + return -1; + sprintf(name, "%sb0w", devpath); @@ -17751,487 +14948,389 @@ diff -Nur linux-2.4.32/drivers/net/hnd/sbutils.c linux-2.4.32-brcm/drivers/net/h + return 0; +} + -diff -Nur linux-2.4.32/drivers/net/hnd/shared_ksyms.sh linux-2.4.32-brcm/drivers/net/hnd/shared_ksyms.sh ---- linux-2.4.32/drivers/net/hnd/shared_ksyms.sh 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/hnd/shared_ksyms.sh 2005-12-16 23:39:11.316860000 +0100 -@@ -0,0 +1,21 @@ -+#!/bin/sh -+# -+# Copyright 2004, Broadcom Corporation -+# All Rights Reserved. -+# -+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+# -+# $Id: shared_ksyms.sh,v 1.1 2005/03/16 13:50:00 wbx Exp $ -+# -+ -+cat < -+#include -+EOF -+ -+for file in $* ; do -+ ${NM} $file | sed -ne 's/[0-9A-Fa-f]* [DT] \([^ ]*\)/extern void \1; EXPORT_SYMBOL(\1);/p' -+done -diff -Nur linux-2.4.32/drivers/net/Makefile linux-2.4.32-brcm/drivers/net/Makefile ---- linux-2.4.32/drivers/net/Makefile 2005-01-19 15:09:56.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/Makefile 2005-12-16 23:39:11.284858000 +0100 -@@ -3,6 +3,8 @@ - # Makefile for the Linux network (ethercard) device drivers. - # - -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -+ - obj-y := - obj-m := - obj-n := -@@ -39,6 +41,8 @@ - obj-$(CONFIG_ISDN) += slhc.o - endif - -+subdir-$(CONFIG_HND) += hnd -+subdir-$(CONFIG_WL) += wl - subdir-$(CONFIG_NET_PCMCIA) += pcmcia - subdir-$(CONFIG_NET_WIRELESS) += wireless - subdir-$(CONFIG_TULIP) += tulip -@@ -69,6 +74,13 @@ - obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o - obj-$(CONFIG_SUNGEM) += sungem.o - -+ifeq ($(CONFIG_HND),y) -+ obj-y += hnd/hnd.o -+endif -+ifeq ($(CONFIG_WL),y) -+ obj-y += wl/wl.o -+endif -+ - obj-$(CONFIG_MACE) += mace.o - obj-$(CONFIG_BMAC) += bmac.o - obj-$(CONFIG_GMAC) += gmac.o -diff -Nur linux-2.4.32/drivers/net/wireless/Config.in linux-2.4.32-brcm/drivers/net/wireless/Config.in ---- linux-2.4.32/drivers/net/wireless/Config.in 2004-11-17 12:54:21.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/wireless/Config.in 2005-12-16 23:39:11.364863000 +0100 -@@ -13,6 +13,7 @@ - fi - - if [ "$CONFIG_PCI" = "y" ]; then -+ dep_tristate ' Proprietary Broadcom BCM43xx 802.11 Wireless support' CONFIG_WL - dep_tristate ' Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)' CONFIG_PLX_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL - dep_tristate ' Hermes in TMD7160/NCP130 based PCI adaptor support (Pheecom WL-PCI etc.) (EXPERIMENTAL)' CONFIG_TMD_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL - dep_tristate ' Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)' CONFIG_PCI_HERMES $CONFIG_HERMES $CONFIG_EXPERIMENTAL -diff -Nur linux-2.4.32/drivers/net/wl/Makefile linux-2.4.32-brcm/drivers/net/wl/Makefile ---- linux-2.4.32/drivers/net/wl/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/net/wl/Makefile 2005-12-16 23:39:11.364863000 +0100 -@@ -0,0 +1,26 @@ -+# -+# Makefile for the Broadcom wl driver -+# -+# Copyright 2004, Broadcom Corporation -+# All Rights Reserved. -+# -+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+# -+# $Id: Makefile,v 1.2 2005/03/29 03:32:18 mbm Exp $ -+ -+EXTRA_CFLAGS += -I$(TOPDIR)/arch/mips/bcm947xx/include -+ -+O_TARGET := wl.o -+ -+obj-y := apsta_aeskeywrap.o apsta_aes.o apsta_bcmwpa.o apsta_d11ucode.o -+obj-y += apsta_hmac.o apsta_md5.o apsta_passhash.o apsta_prf.o apsta_rc4.o -+obj-y += apsta_rijndael-alg-fst.o apsta_sha1.o apsta_tkhash.o apsta_wlc_led.o -+obj-y += apsta_wlc_phy.o apsta_wlc_rate.o apsta_wlc_security.o -+obj-y += apsta_wlc_sup.o apsta_wlc_wet.o apsta_wl_linux.o apsta_wlc.o -+ -+obj-m := $(O_TARGET) -+ -+include $(TOPDIR)/Rules.make -diff -Nur linux-2.4.32/drivers/parport/Config.in linux-2.4.32-brcm/drivers/parport/Config.in ---- linux-2.4.32/drivers/parport/Config.in 2004-02-18 14:36:31.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/parport/Config.in 2005-12-16 23:39:11.364863000 +0100 -@@ -11,6 +11,7 @@ - tristate 'Parallel port support' CONFIG_PARPORT - if [ "$CONFIG_PARPORT" != "n" ]; then - dep_tristate ' PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT -+ dep_tristate ' Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT - if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then - if [ "$CONFIG_SERIAL" = "m" ]; then - define_tristate CONFIG_PARPORT_PC_CML1 m -diff -Nur linux-2.4.32/drivers/parport/Makefile linux-2.4.32-brcm/drivers/parport/Makefile ---- linux-2.4.32/drivers/parport/Makefile 2004-08-08 01:26:05.000000000 +0200 -+++ linux-2.4.32-brcm/drivers/parport/Makefile 2005-12-16 23:39:11.364863000 +0100 -@@ -22,6 +22,7 @@ - - obj-$(CONFIG_PARPORT) += parport.o - obj-$(CONFIG_PARPORT_PC) += parport_pc.o -+obj-$(CONFIG_PARPORT_SPLINK) += parport_splink.o - obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o - obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o - obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o -diff -Nur linux-2.4.32/drivers/parport/parport_splink.c linux-2.4.32-brcm/drivers/parport/parport_splink.c ---- linux-2.4.32/drivers/parport/parport_splink.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/parport/parport_splink.c 2005-12-16 23:39:11.364863000 +0100 -@@ -0,0 +1,345 @@ -+/* Low-level parallel port routines for the ASUS WL-500g built-in port -+ * -+ * Author: Nuno Grilo -+ * Based on parport_pc source -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define SPLINK_ADDRESS 0xBF800010 -+ -+#undef DEBUG -+ -+#ifdef DEBUG -+#define DPRINTK printk -+#else -+#define DPRINTK(stuff...) -+#endif -+ -+ -+/* __parport_splink_frob_control differs from parport_splink_frob_control in that -+ * it doesn't do any extra masking. */ -+static __inline__ unsigned char __parport_splink_frob_control (struct parport *p, -+ unsigned char mask, -+ unsigned char val) ++static uint ++sb_chipc_capability(sb_t *sbh) +{ -+ struct parport_pc_private *priv = p->physport->private_data; -+ unsigned char *io = (unsigned char *) p->base; -+ unsigned char ctr = priv->ctr; -+#ifdef DEBUG_PARPORT -+ printk (KERN_DEBUG -+ "__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n", -+ mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); -+#endif -+ ctr = (ctr & ~mask) ^ val; -+ ctr &= priv->ctr_writable; /* only write writable bits. */ -+ *(io+2) = ctr; -+ priv->ctr = ctr; /* Update soft copy */ -+ return ctr; -+} -+ ++ sb_info_t *si; + ++ si = SB_INFO(sbh); + -+static void parport_splink_data_forward (struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); -+ __parport_splink_frob_control (p, 0x20, 0); ++ /* Make sure that there is ChipCommon core present */ ++ if (si->coreid[SB_CC_IDX] == SB_CC) ++ return (sb_corereg(si, SB_CC_IDX, OFFSETOF(chipcregs_t, capabilities), ++ 0, 0)); ++ return 0; +} + -+static void parport_splink_data_reverse (struct parport *p) ++/* Return ADDR64 capability of the backplane */ ++bool ++sb_backplane64(sb_t *sbh) +{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); -+ __parport_splink_frob_control (p, 0x20, 0x20); ++ return ((sb_chipc_capability(sbh) & CAP_BKPLN64) != 0); +} + -+/* -+static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++void ++sb_btcgpiowar(sb_t *sbh) +{ -+ DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n"); -+ parport_generic_irq(irq, (struct parport *) dev_id, regs); -+} -+*/ ++ sb_info_t *si; ++ uint origidx; ++ uint intr_val = 0; ++ chipcregs_t *cc; ++ si = SB_INFO(sbh); + -+static void parport_splink_enable_irq(struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n"); -+ __parport_splink_frob_control (p, 0x10, 0x10); -+} ++ /* Make sure that there is ChipCommon core present && ++ * UART_TX is strapped to 1 ++ */ ++ if (!(sb_chipc_capability(sbh) & CAP_UARTGPIO)) ++ return; + -+static void parport_splink_disable_irq(struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n"); -+ __parport_splink_frob_control (p, 0x10, 0); -+} ++ /* sb_corereg cannot be used as we have to guarantee 8-bit read/writes */ ++ INTR_OFF(si, intr_val); + -+static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n"); -+ s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0); -+ if (dev->irq_func && -+ dev->port->irq != PARPORT_IRQ_NONE) -+ /* Set ackIntEn */ -+ s->u.pc.ctr |= 0x10; -+} ++ origidx = sb_coreidx(sbh); + -+static void parport_splink_save_state(struct parport *p, struct parport_state *s) -+{ -+ const struct parport_pc_private *priv = p->physport->private_data; -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n"); -+ s->u.pc.ctr = priv->ctr; ++ cc = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); ++ if (cc == NULL) ++ goto end; ++ ++ W_REG(si->osh, &cc->uart0mcr, R_REG(si->osh, &cc->uart0mcr) | 0x04); ++ ++end: ++ /* restore the original index */ ++ sb_setcoreidx(sbh, origidx); ++ ++ INTR_RESTORE(si, intr_val); +} + -+static void parport_splink_restore_state(struct parport *p, struct parport_state *s) ++/* check if the device is removed */ ++bool ++sb_deviceremoved(sb_t *sbh) +{ -+ struct parport_pc_private *priv = p->physport->private_data; -+ unsigned char *io = (unsigned char *) p->base; -+ unsigned char ctr = s->u.pc.ctr; ++ uint32 w; ++ sb_info_t *si; + -+ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n"); -+ *(io+2) = ctr; -+ priv->ctr = ctr; -+} ++ si = SB_INFO(sbh); + -+static void parport_splink_setup_interrupt(void) { -+ return; ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ ASSERT(si->osh); ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_VID, sizeof(uint32)); ++ if ((w & 0xFFFF) != VENDOR_BROADCOM) ++ return TRUE; ++ else ++ return FALSE; ++ default: ++ return FALSE; ++ } ++ return FALSE; +} + -+static void parport_splink_write_data(struct parport *p, unsigned char d) { -+ DPRINTK(KERN_DEBUG "parport_splink: write data called\n"); -+ unsigned char *io = (unsigned char *) p->base; -+ *io = d; -+} ++/* Return the RAM size of the SOCRAM core */ ++uint32 ++sb_socram_size(sb_t *sbh) ++{ ++ sb_info_t *si; ++ uint origidx; ++ uint intr_val = 0; + -+static unsigned char parport_splink_read_data(struct parport *p) { -+ DPRINTK(KERN_DEBUG "parport_splink: read data called\n"); -+ unsigned char *io = (unsigned char *) p->base; -+ return *io; -+} ++ sbsocramregs_t *regs; ++ bool wasup; ++ uint corerev; ++ uint32 coreinfo; ++ uint memsize = 0; + -+static void parport_splink_write_control(struct parport *p, unsigned char d) -+{ -+ const unsigned char wm = (PARPORT_CONTROL_STROBE | -+ PARPORT_CONTROL_AUTOFD | -+ PARPORT_CONTROL_INIT | -+ PARPORT_CONTROL_SELECT); ++ si = SB_INFO(sbh); ++ ASSERT(si); + -+ DPRINTK(KERN_DEBUG "parport_splink: write control called\n"); -+ /* Take this out when drivers have adapted to the newer interface. */ -+ if (d & 0x20) { -+ printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", -+ p->name, p->cad->name); -+ parport_splink_data_reverse (p); ++ /* Block ints and save current core */ ++ INTR_OFF(si, intr_val); ++ origidx = sb_coreidx(sbh); ++ ++ /* Switch to SOCRAM core */ ++ if (!(regs = sb_setcore(sbh, SB_SOCRAM, 0))) ++ goto done; ++ ++ /* Get info for determining size */ ++ if (!(wasup = sb_iscoreup(sbh))) ++ sb_core_reset(sbh, 0, 0); ++ corerev = sb_corerev(sbh); ++ coreinfo = R_REG(si->osh, ®s->coreinfo); ++ ++ /* Calculate size from coreinfo based on rev */ ++ switch (corerev) { ++ case 0: ++ memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK)); ++ break; ++ default: /* rev >= 1 */ ++ memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK)); ++ memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT; ++ break; + } + -+ __parport_splink_frob_control (p, wm, d & wm); -+} ++ /* Return to previous state and core */ ++ if (!wasup) ++ sb_core_disable(sbh, 0); ++ sb_setcoreidx(sbh, origidx); + -+static unsigned char parport_splink_read_control(struct parport *p) -+{ -+ const unsigned char wm = (PARPORT_CONTROL_STROBE | -+ PARPORT_CONTROL_AUTOFD | -+ PARPORT_CONTROL_INIT | -+ PARPORT_CONTROL_SELECT); -+ DPRINTK(KERN_DEBUG "parport_splink: read control called\n"); -+ const struct parport_pc_private *priv = p->physport->private_data; -+ return priv->ctr & wm; /* Use soft copy */ ++done: ++ INTR_RESTORE(si, intr_val); ++ return memsize; +} + -+static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask, -+ unsigned char val) -+{ -+ const unsigned char wm = (PARPORT_CONTROL_STROBE | -+ PARPORT_CONTROL_AUTOFD | -+ PARPORT_CONTROL_INIT | -+ PARPORT_CONTROL_SELECT); + -+ DPRINTK(KERN_DEBUG "parport_splink: frob control called\n"); -+ /* Take this out when drivers have adapted to the newer interface. */ -+ if (mask & 0x20) { -+ printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", -+ p->name, p->cad->name, -+ (val & 0x20) ? "reverse" : "forward"); -+ if (val & 0x20) -+ parport_splink_data_reverse (p); -+ else -+ parport_splink_data_forward (p); -+ } +diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c +--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/setup.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,241 @@ ++/* ++ * Generic setup routines for Broadcom MIPS boards ++ * ++ * Copyright (C) 2005 Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ */ + -+ /* Restrict mask and val to control lines. */ -+ mask &= wm; -+ val &= wm; ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ return __parport_splink_frob_control (p, mask, val); -+} ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+static unsigned char parport_splink_read_status(struct parport *p) -+{ -+ DPRINTK(KERN_DEBUG "parport_splink: read status called\n"); -+ unsigned char *io = (unsigned char *) p->base; -+ return *(io+1); -+} ++/* Virtual IRQ base, after last hw IRQ */ ++#define SBMIPS_VIRTIRQ_BASE 6 + -+static void parport_splink_inc_use_count(void) -+{ -+#ifdef MODULE -+ MOD_INC_USE_COUNT; ++/* # IRQs, hw and sw IRQs */ ++#define SBMIPS_NUMIRQS 8 ++ ++/* Global SB handle */ ++sb_t *bcm947xx_sbh = NULL; ++spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED; ++ ++/* Convenience */ ++#define sbh bcm947xx_sbh ++#define sbh_lock bcm947xx_sbh_lock ++ ++extern void bcm947xx_time_init(void); ++extern void bcm947xx_timer_setup(struct irqaction *irq); ++ ++#ifdef CONFIG_REMOTE_DEBUG ++extern void set_debug_traps(void); ++extern void rs_kgdb_hook(struct serial_state *); ++extern void breakpoint(void); +#endif -+} + -+static void parport_splink_dec_use_count(void) -+{ -+#ifdef MODULE -+ MOD_DEC_USE_COUNT; ++#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ++extern struct ide_ops std_ide_ops; +#endif ++ ++/* Kernel command line */ ++char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE; ++extern void sb_serial_init(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); ++ ++void ++bcm947xx_machine_restart(char *command) ++{ ++ printk("Please stand by while rebooting the system...\n"); ++ ++ /* Set the watchdog timer to reset immediately */ ++ __cli(); ++ sb_watchdog(sbh, 1); ++ while (1); +} + -+static struct parport_operations parport_splink_ops = ++void ++bcm947xx_machine_halt(void) +{ -+ parport_splink_write_data, -+ parport_splink_read_data, ++ printk("System halted\n"); + -+ parport_splink_write_control, -+ parport_splink_read_control, -+ parport_splink_frob_control, ++ /* Disable interrupts and watchdog and spin forever */ ++ __cli(); ++ sb_watchdog(sbh, 0); ++ while (1); ++} + -+ parport_splink_read_status, ++#ifdef CONFIG_SERIAL + -+ parport_splink_enable_irq, -+ parport_splink_disable_irq, ++static int ser_line = 0; + -+ parport_splink_data_forward, -+ parport_splink_data_reverse, ++typedef struct { ++ void *regs; ++ uint irq; ++ uint baud_base; ++ uint reg_shift; ++} serial_port; + -+ parport_splink_init_state, -+ parport_splink_save_state, -+ parport_splink_restore_state, ++static serial_port ports[4]; ++static int num_ports = 0; + -+ parport_splink_inc_use_count, -+ parport_splink_dec_use_count, ++static void ++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) ++{ ++ ports[num_ports].regs = regs; ++ ports[num_ports].irq = irq; ++ ports[num_ports].baud_base = baud_base; ++ ports[num_ports].reg_shift = reg_shift; ++ num_ports++; ++} + -+ parport_ieee1284_epp_write_data, -+ parport_ieee1284_epp_read_data, -+ parport_ieee1284_epp_write_addr, -+ parport_ieee1284_epp_read_addr, ++static void ++do_serial_add(serial_port *port) ++{ ++ void *regs; ++ uint irq; ++ uint baud_base; ++ uint reg_shift; ++ struct serial_struct s; ++ ++ regs = port->regs; ++ irq = port->irq; ++ baud_base = port->baud_base; ++ reg_shift = port->reg_shift; ++ ++ memset(&s, 0, sizeof(s)); + -+ parport_ieee1284_ecp_write_data, -+ parport_ieee1284_ecp_read_data, -+ parport_ieee1284_ecp_write_addr, ++ s.line = ser_line++; ++ s.iomem_base = regs; ++ s.irq = irq + 2; ++ s.baud_base = baud_base / 16; ++ s.flags = ASYNC_BOOT_AUTOCONF; ++ s.io_type = SERIAL_IO_MEM; ++ s.iomem_reg_shift = reg_shift; + -+ parport_ieee1284_write_compat, -+ parport_ieee1284_read_nibble, -+ parport_ieee1284_read_byte, -+}; ++ if (early_serial_setup(&s) != 0) { ++ printk(KERN_ERR "Serial setup failed!\n"); ++ } ++} + -+/* --- Initialisation code -------------------------------- */ ++#endif /* CONFIG_SERIAL */ + -+static struct parport *parport_splink_probe_port (unsigned long int base) ++void __init ++brcm_setup(void) +{ -+ struct parport_pc_private *priv; -+ struct parport_operations *ops; -+ struct parport *p; ++ char *s; ++ int i; ++ char *value; + -+ if (check_mem_region(base, 3)) { -+ printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base); -+ return NULL; -+ } -+ priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL); -+ if (!priv) { -+ printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); -+ return NULL; -+ } -+ ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL); -+ if (!ops) { -+ printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n", -+ base); -+ kfree (priv); -+ return NULL; -+ } -+ memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations)); -+ priv->ctr = 0xc; -+ priv->ctr_writable = 0xff; ++ /* Get global SB handle */ ++ sbh = sb_kattach(); + -+ if (!(p = parport_register_port(base, PARPORT_IRQ_NONE, -+ PARPORT_DMA_NONE, ops))) { -+ printk (KERN_DEBUG "parport (0x%lx): registration failed!\n", -+ base); -+ kfree (priv); -+ kfree (ops); -+ return NULL; ++ /* Initialize clocks and interrupts */ ++ sb_mips_init(sbh, SBMIPS_VIRTIRQ_BASE); ++ ++ if (BCM330X(current_cpu_data.processor_id) && ++ (read_c0_diag() & BRCM_PFC_AVAIL)) { ++ /* ++ * Now that the sbh is inited set the proper PFC value ++ */ ++ printk("Setting the PFC to its default value\n"); ++ enable_pfc(PFC_AUTO); + } + -+ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT; -+ p->size = (p->modes & PARPORT_MODE_EPP)?8:3; -+ p->private_data = priv; + -+ parport_proc_register(p); -+ request_mem_region (p->base, 3, p->name); ++#ifdef CONFIG_SERIAL ++ sb_serial_init(sbh, serial_add); + -+ /* Done probing. Now put the port into a sensible start-up state. */ -+ parport_splink_write_data(p, 0); -+ parport_splink_data_forward (p); ++ /* reverse serial ports if nvram variable starts with console=ttyS1 */ ++ /* Initialize UARTs */ ++ s = nvram_get("kernel_args"); ++ if (!s) s = ""; ++ if (!strncmp(s, "console=ttyS1", 13)) { ++ for (i = num_ports; i; i--) ++ do_serial_add(&ports[i - 1]); ++ } else { ++ for (i = 0; i < num_ports; i++) ++ do_serial_add(&ports[i]); ++ } ++#endif + -+ /* Now that we've told the sharing engine about the port, and -+ found out its characteristics, let the high-level drivers -+ know about it. */ -+ parport_announce_port (p); ++#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ++ ide_ops = &std_ide_ops; ++#endif + -+ DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n", -+ base); -+ return p; -+} ++ /* Override default command line arguments */ ++ value = nvram_get("kernel_cmdline"); ++ if (value && strlen(value) && strncmp(value, "empty", 5)) ++ strncpy(arcs_cmdline, value, sizeof(arcs_cmdline)); + -+static void parport_splink_unregister_port(struct parport *p) { -+ struct parport_pc_private *priv = p->private_data; -+ struct parport_operations *ops = p->ops; + -+ if (p->irq != PARPORT_IRQ_NONE) -+ free_irq(p->irq, p); -+ release_mem_region(p->base, 3); -+ parport_proc_unregister(p); -+ kfree (priv); -+ parport_unregister_port(p); -+ kfree (ops); ++ /* Generic setup */ ++ _machine_restart = bcm947xx_machine_restart; ++ _machine_halt = bcm947xx_machine_halt; ++ _machine_power_off = bcm947xx_machine_halt; ++ ++ board_time_init = bcm947xx_time_init; ++ board_timer_setup = bcm947xx_timer_setup; +} + ++const char * ++get_system_type(void) ++{ ++ static char s[32]; + -+int parport_splink_init(void) -+{ -+ int ret; -+ -+ DPRINTK(KERN_DEBUG "parport_splink init called\n"); -+ parport_splink_setup_interrupt(); -+ ret = !parport_splink_probe_port(SPLINK_ADDRESS); -+ -+ return ret; ++ if (bcm947xx_sbh) { ++ sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh), ++ sb_chiprev(bcm947xx_sbh)); ++ return s; ++ } ++ else ++ return "Broadcom BCM947XX"; +} + -+void parport_splink_cleanup(void) { -+ struct parport *p = parport_enumerate(), *tmp; -+ DPRINTK(KERN_DEBUG "parport_splink cleanup called\n"); -+ if (p->size) { -+ if (p->modes & PARPORT_MODE_PCSPP) { -+ while(p) { -+ tmp = p->next; -+ parport_splink_unregister_port(p); -+ p = tmp; -+ } -+ } -+ } ++void __init ++bus_error_init(void) ++{ +} + -+MODULE_AUTHOR("Nuno Grilo "); -+MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port"); -+MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port"); -+MODULE_LICENSE("GPL"); -+ -+module_init(parport_splink_init) -+module_exit(parport_splink_cleanup) -+ -diff -Nur linux-2.4.32/drivers/pcmcia/bcm4710_generic.c linux-2.4.32-brcm/drivers/pcmcia/bcm4710_generic.c ---- linux-2.4.32/drivers/pcmcia/bcm4710_generic.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/pcmcia/bcm4710_generic.c 2005-12-16 23:39:11.368863250 +0100 -@@ -0,0 +1,912 @@ +diff -urN linux.old/arch/mips/bcm947xx/sflash.c linux.dev/arch/mips/bcm947xx/sflash.c +--- linux.old/arch/mips/bcm947xx/sflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/sflash.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,422 @@ +/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface + * -+ * bcm47xx pcmcia driver -+ * -+ * Copyright 2004, Broadcom Corporation ++ * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -18239,1324 +15338,1350 @@ diff -Nur linux-2.4.32/drivers/pcmcia/bcm4710_generic.c linux-2.4.32-brcm/driver + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * Based on sa1100_generic.c from www.handhelds.org, -+ * and au1000_generic.c from oss.sgi.com. -+ * -+ * $Id: bcm4710_generic.c,v 1.1 2005/03/16 13:50:00 wbx Exp $ ++ * $Id: sflash.c,v 1.1.1.13 2006/02/27 03:43:16 honor Exp $ + */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "cs_internal.h" -+ -+#include -+#include -+#include + ++#include +#include -+#include -+#include -+ -+#include "bcm4710pcmcia.h" -+ -+#ifdef PCMCIA_DEBUG -+static int pc_debug = PCMCIA_DEBUG; -+#endif -+ -+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller"); -+ -+/* This structure maintains housekeeping state for each socket, such -+ * as the last known values of the card detect pins, or the Card Services -+ * callback value associated with the socket: -+ */ -+static struct bcm47xx_pcmcia_socket *pcmcia_socket; -+static int socket_count; -+ -+ -+/* Returned by the low-level PCMCIA interface: */ -+static struct pcmcia_low_level *pcmcia_low_level; -+ -+/* Event poll timer structure */ -+static struct timer_list poll_timer; -+ ++#include ++#include ++#include ++#include ++#include ++#include + -+/* Prototypes for routines which are used internally: */ ++/* Private global state */ ++static struct sflash sflash; + -+static int bcm47xx_pcmcia_driver_init(void); -+static void bcm47xx_pcmcia_driver_shutdown(void); -+static void bcm47xx_pcmcia_task_handler(void *data); -+static void bcm47xx_pcmcia_poll_event(unsigned long data); -+static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs); -+static struct tq_struct bcm47xx_pcmcia_task; ++/* Issue a serial flash command */ ++static INLINE void ++sflash_cmd(chipcregs_t *cc, uint opcode) ++{ ++ W_REG(NULL, &cc->flashcontrol, SFLASH_START | opcode); ++ while (R_REG(NULL, &cc->flashcontrol) & SFLASH_BUSY); ++} + -+#ifdef CONFIG_PROC_FS -+static int bcm47xx_pcmcia_proc_status(char *buf, char **start, -+ off_t pos, int count, int *eof, void *data); -+#endif ++/* Initialize serial flash access */ ++struct sflash * ++sflash_init(chipcregs_t *cc) ++{ ++ uint32 id, id2; + ++ bzero(&sflash, sizeof(sflash)); + -+/* Prototypes for operations which are exported to the -+ * in-kernel PCMCIA core: -+ */ ++ sflash.type = R_REG(NULL, &cc->capabilities) & CAP_FLASH_MASK; + -+static int bcm47xx_pcmcia_init(unsigned int sock); -+static int bcm47xx_pcmcia_suspend(unsigned int sock); -+static int bcm47xx_pcmcia_register_callback(unsigned int sock, -+ void (*handler)(void *, unsigned int), void *info); -+static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap); -+static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value); -+static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state); -+static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state); -+static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io); -+static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io); -+static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem); -+static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem); -+#ifdef CONFIG_PROC_FS -+static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base); -+#endif ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Probe for ST chips */ ++ sflash_cmd(cc, SFLASH_ST_DP); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id = R_REG(NULL, &cc->flashdata); ++ switch (id) { ++ case 0x11: ++ /* ST M25P20 2 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 4; ++ break; ++ case 0x12: ++ /* ST M25P40 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ break; ++ case 0x13: ++ /* ST M25P80 8 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 16; ++ break; ++ case 0x14: ++ /* ST M25P16 16 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 32; ++ break; ++ case 0x15: ++ /* ST M25P32 32 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 64; ++ break; ++ case 0x16: ++ /* ST M25P64 64 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 128; ++ break; ++ case 0xbf: ++ W_REG(NULL, &cc->flashaddress, 1); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id2 = R_REG(NULL, &cc->flashdata); ++ if (id2 == 0x44) { ++ /* SST M25VF80 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ } ++ break; ++ } ++ break; + -+static struct pccard_operations bcm47xx_pcmcia_operations = { -+ bcm47xx_pcmcia_init, -+ bcm47xx_pcmcia_suspend, -+ bcm47xx_pcmcia_register_callback, -+ bcm47xx_pcmcia_inquire_socket, -+ bcm47xx_pcmcia_get_status, -+ bcm47xx_pcmcia_get_socket, -+ bcm47xx_pcmcia_set_socket, -+ bcm47xx_pcmcia_get_io_map, -+ bcm47xx_pcmcia_set_io_map, -+ bcm47xx_pcmcia_get_mem_map, -+ bcm47xx_pcmcia_set_mem_map, -+#ifdef CONFIG_PROC_FS -+ bcm47xx_pcmcia_proc_setup -+#endif -+}; ++ case SFLASH_AT: ++ /* Probe for Atmel chips */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ id = R_REG(NULL, &cc->flashdata) & 0x3c; ++ switch (id) { ++ case 0xc: ++ /* Atmel AT45DB011 1Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 512; ++ break; ++ case 0x14: ++ /* Atmel AT45DB021 2Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 1024; ++ break; ++ case 0x1c: ++ /* Atmel AT45DB041 4Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 2048; ++ break; ++ case 0x24: ++ /* Atmel AT45DB081 8Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 4096; ++ break; ++ case 0x2c: ++ /* Atmel AT45DB161 16Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 4096; ++ break; ++ case 0x34: ++ /* Atmel AT45DB321 32Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 8192; ++ break; ++ case 0x3c: ++ /* Atmel AT45DB642 64Mbit Serial Flash */ ++ sflash.blocksize = 1024; ++ sflash.numblocks = 8192; ++ break; ++ } ++ break; ++ } + ++ sflash.size = sflash.blocksize * sflash.numblocks; ++ return sflash.size ? &sflash : NULL; ++} + -+/* -+ * bcm47xx_pcmcia_driver_init() -+ * -+ * This routine performs a basic sanity check to ensure that this -+ * kernel has been built with the appropriate board-specific low-level -+ * PCMCIA support, performs low-level PCMCIA initialization, registers -+ * this socket driver with Card Services, and then spawns the daemon -+ * thread which is the real workhorse of the socket driver. -+ * -+ * Please see linux/Documentation/arm/SA1100/PCMCIA for more information -+ * on the low-level kernel interface. -+ * -+ * Returns: 0 on success, -1 on error -+ */ -+static int __init bcm47xx_pcmcia_driver_init(void) ++/* Read len bytes starting at offset into buf. Returns number of bytes read. */ ++int ++sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) +{ -+ servinfo_t info; -+ struct pcmcia_init pcmcia_init; -+ struct pcmcia_state state; -+ unsigned int i; -+ unsigned long tmp; -+ -+ -+ printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE); -+ -+ CardServices(GetCardServicesInfo, &info); ++ int cnt; ++ uint32 *from, *to; + -+ if (info.Revision != CS_RELEASE_CODE) { -+ printk(KERN_ERR "Card Services release codes do not match\n"); -+ return -1; -+ } ++ if (!len) ++ return 0; + -+#ifdef CONFIG_BCM4710 -+ pcmcia_low_level=&bcm4710_pcmcia_ops; -+#else -+#error Unsupported Broadcom BCM47XX board. -+#endif ++ if ((offset + len) > sflash.size) ++ return -22; + -+ pcmcia_init.handler=bcm47xx_pcmcia_interrupt; ++ if ((len >= 4) && (offset & 3)) ++ cnt = 4 - (offset & 3); ++ else if ((len >= 4) && ((uint32)buf & 3)) ++ cnt = 4 - ((uint32)buf & 3); ++ else ++ cnt = len; + -+ if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) { -+ printk(KERN_ERR "Unable to initialize PCMCIA service.\n"); -+ return -EIO; -+ } else { -+ printk("\t%d PCMCIA sockets initialized.\n", socket_count); -+ } ++ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset); ++ to = (uint32 *)buf; + -+ pcmcia_socket = -+ kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count, -+ GFP_KERNEL); -+ memset(pcmcia_socket, 0, -+ sizeof(struct bcm47xx_pcmcia_socket) * socket_count); -+ if (!pcmcia_socket) { -+ printk(KERN_ERR "Card Services can't get memory \n"); -+ return -1; -+ } -+ -+ for (i = 0; i < socket_count; i++) { -+ if (pcmcia_low_level->socket_state(i, &state) < 0) { -+ printk(KERN_ERR "Unable to get PCMCIA status\n"); -+ return -EIO; -+ } -+ pcmcia_socket[i].k_state = state; -+ pcmcia_socket[i].cs_state.csc_mask = SS_DETECT; -+ -+ if (i == 0) { -+ pcmcia_socket[i].virt_io = -+ (unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000); -+ /* Substract ioport base which gets added by in/out */ -+ pcmcia_socket[i].virt_io -= mips_io_port_base; -+ pcmcia_socket[i].phys_attr = -+ (unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF); -+ pcmcia_socket[i].phys_mem = -+ (unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF); -+ } else { -+ printk(KERN_ERR "bcm4710: socket 1 not supported\n"); -+ return 1; -+ } ++ if (cnt < 4) { ++ bcopy(from, to, cnt); ++ return cnt; + } + -+ /* Only advertise as many sockets as we can detect: */ -+ if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) { -+ printk(KERN_ERR "Unable to register socket service routine\n"); -+ return -ENXIO; ++ while (cnt >= 4) { ++ *to++ = *from++; ++ cnt -= 4; + } + -+ /* Start the event poll timer. -+ * It will reschedule by itself afterwards. -+ */ -+ bcm47xx_pcmcia_poll_event(0); -+ -+ DEBUG(1, "bcm4710: initialization complete\n"); -+ return 0; -+ ++ return (len - cnt); +} + -+module_init(bcm47xx_pcmcia_driver_init); -+ -+ -+/* -+ * bcm47xx_pcmcia_driver_shutdown() -+ * -+ * Invokes the low-level kernel service to free IRQs associated with this -+ * socket controller and reset GPIO edge detection. -+ */ -+static void __exit bcm47xx_pcmcia_driver_shutdown(void) ++/* Poll for command completion. Returns zero when complete. */ ++int ++sflash_poll(chipcregs_t *cc, uint offset) +{ -+ int i; ++ if (offset >= sflash.size) ++ return -22; + -+ del_timer_sync(&poll_timer); -+ unregister_ss_entry(&bcm47xx_pcmcia_operations); -+ pcmcia_low_level->shutdown(); -+ flush_scheduled_tasks(); -+ for (i = 0; i < socket_count; i++) { -+ if (pcmcia_socket[i].virt_io) -+ iounmap((void *)pcmcia_socket[i].virt_io); -+ if (pcmcia_socket[i].phys_attr) -+ iounmap((void *)pcmcia_socket[i].phys_attr); -+ if (pcmcia_socket[i].phys_mem) -+ iounmap((void *)pcmcia_socket[i].phys_mem); ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Check for ST Write In Progress bit */ ++ sflash_cmd(cc, SFLASH_ST_RDSR); ++ return R_REG(NULL, &cc->flashdata) & SFLASH_ST_WIP; ++ case SFLASH_AT: ++ /* Check for Atmel Ready bit */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ return !(R_REG(NULL, &cc->flashdata) & SFLASH_AT_READY); + } -+ DEBUG(1, "bcm4710: shutdown complete\n"); -+} -+ -+module_exit(bcm47xx_pcmcia_driver_shutdown); -+ -+/* -+ * bcm47xx_pcmcia_init() -+ * We perform all of the interesting initialization tasks in -+ * bcm47xx_pcmcia_driver_init(). -+ * -+ * Returns: 0 -+ */ -+static int bcm47xx_pcmcia_init(unsigned int sock) -+{ -+ DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock); -+ -+ return 0; -+} -+ -+/* -+ * bcm47xx_pcmcia_suspend() -+ * -+ * We don't currently perform any actions on a suspend. -+ * -+ * Returns: 0 -+ */ -+static int bcm47xx_pcmcia_suspend(unsigned int sock) -+{ -+ DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock); + + return 0; +} + -+ -+/* -+ * bcm47xx_pcmcia_events() -+ * -+ * Helper routine to generate a Card Services event mask based on -+ * state information obtained from the kernel low-level PCMCIA layer -+ * in a recent (and previous) sampling. Updates `prev_state'. -+ * -+ * Returns: an event mask for the given socket state. ++/* Write len bytes starting at offset into buf. Returns number of bytes ++ * written. Caller should poll for completion. + */ -+static inline unsigned -+bcm47xx_pcmcia_events(struct pcmcia_state *state, -+ struct pcmcia_state *prev_state, -+ unsigned int mask, unsigned int flags) ++int ++sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) +{ -+ unsigned int events=0; -+ -+ if (state->bvd1 != prev_state->bvd1) { -+ -+ DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1); -+ -+ events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD; -+ } -+ -+ if (state->bvd2 != prev_state->bvd2) { -+ -+ DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2); -+ -+ events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN; -+ } -+ -+ if (state->detect != prev_state->detect) { -+ -+ DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect); -+ -+ events |= mask & SS_DETECT; -+ } -+ -+ -+ if (state->ready != prev_state->ready) { ++ struct sflash *sfl; ++ int ret = 0; ++ bool is4712b0; ++ uint32 page, byte, mask; + -+ DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready); ++ if (!len) ++ return 0; + -+ events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY); -+ } ++ if ((offset + len) > sflash.size) ++ return -22; + -+ if (events != 0) { -+ DEBUG(2, "events: %s%s%s%s%s\n", -+ (events & SS_DETECT) ? "DETECT " : "", -+ (events & SS_READY) ? "READY " : "", -+ (events & SS_BATDEAD) ? "BATDEAD " : "", -+ (events & SS_BATWARN) ? "BATWARN " : "", -+ (events & SS_STSCHG) ? "STSCHG " : ""); ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ mask = R_REG(NULL, &cc->chipid); ++ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_CHIP_ID) && ++ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT))); ++ /* Enable writes */ ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ if (is4712b0) { ++ mask = 1 << 14; ++ W_REG(NULL, &cc->flashaddress, offset); ++ W_REG(NULL, &cc->flashdata, *buf++); ++ /* Set chip select */ ++ OR_REG(NULL, &cc->gpioout, mask); ++ /* Issue a page program with the first byte */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ ret = 1; ++ offset++; ++ len--; ++ while (len > 0) { ++ if ((offset & 255) == 0) { ++ /* Page boundary, drop cs and return */ ++ AND_REG(NULL, &cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -11; ++ } ++ return ret; ++ } else { ++ /* Write single byte */ ++ sflash_cmd(cc, *buf++); ++ } ++ ret++; ++ offset++; ++ len--; ++ } ++ /* All done, drop cs if needed */ ++ if ((offset & 255) != 1) { ++ /* Drop cs */ ++ AND_REG(NULL, &cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -12; ++ } ++ } ++ } else { ++ ret = 1; ++ W_REG(NULL, &cc->flashaddress, offset); ++ W_REG(NULL, &cc->flashdata, *buf); ++ /* Page program */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ } ++ break; ++ case SFLASH_AT: ++ mask = sfl->blocksize - 1; ++ page = (offset & ~mask) << 1; ++ byte = offset & mask; ++ /* Read main memory page into buffer 1 */ ++ if (byte || (len < sfl->blocksize)) { ++ W_REG(NULL, &cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); ++ /* 250 us for AT45DB321B */ ++ SPINWAIT(sflash_poll(cc, offset), 1000); ++ ASSERT(!sflash_poll(cc, offset)); ++ } ++ /* Write into buffer 1 */ ++ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) { ++ W_REG(NULL, &cc->flashaddress, byte++); ++ W_REG(NULL, &cc->flashdata, *buf++); ++ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); ++ } ++ /* Write buffer 1 into main memory page */ ++ W_REG(NULL, &cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); ++ break; + } + -+ *prev_state=*state; -+ return events; ++ return ret; +} + -+ -+/* -+ * bcm47xx_pcmcia_task_handler() -+ * -+ * Processes serviceable socket events using the "eventd" thread context. -+ * -+ * Event processing (specifically, the invocation of the Card Services event -+ * callback) occurs in this thread rather than in the actual interrupt -+ * handler due to the use of scheduling operations in the PCMCIA core. ++/* Erase a region. Returns number of bytes scheduled for erasure. ++ * Caller should poll for completion. + */ -+static void bcm47xx_pcmcia_task_handler(void *data) ++int ++sflash_erase(chipcregs_t *cc, uint offset) +{ -+ struct pcmcia_state state; -+ int i, events, irq_status; -+ -+ DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__); -+ -+ for (i = 0; i < socket_count; i++) { -+ if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0) -+ printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n"); -+ -+ events = bcm47xx_pcmcia_events(&state, -+ &pcmcia_socket[i].k_state, -+ pcmcia_socket[i].cs_state.csc_mask, -+ pcmcia_socket[i].cs_state.flags); ++ struct sflash *sfl; + -+ if (pcmcia_socket[i].handler != NULL) { -+ pcmcia_socket[i].handler(pcmcia_socket[i].handler_info, -+ events); -+ } -+ } -+} ++ if (offset >= sflash.size) ++ return -22; + -+static struct tq_struct bcm47xx_pcmcia_task = { -+ routine: bcm47xx_pcmcia_task_handler -+}; ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ W_REG(NULL, &cc->flashaddress, offset); ++ sflash_cmd(cc, SFLASH_ST_SE); ++ return sfl->blocksize; ++ case SFLASH_AT: ++ W_REG(NULL, &cc->flashaddress, offset << 1); ++ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); ++ return sfl->blocksize; ++ } + ++ return 0; ++} + +/* -+ * bcm47xx_pcmcia_poll_event() -+ * -+ * Let's poll for events in addition to IRQs since IRQ only is unreliable... ++ * writes the appropriate range of flash, a NULL buf simply erases ++ * the region of flash + */ -+static void bcm47xx_pcmcia_poll_event(unsigned long dummy) ++int ++sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) +{ -+ DEBUG(4, "%s(): polling for events\n", __FUNCTION__); -+ -+ poll_timer.function = bcm47xx_pcmcia_poll_event; -+ poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD; -+ add_timer(&poll_timer); -+ schedule_task(&bcm47xx_pcmcia_task); -+} ++ struct sflash *sfl; ++ uchar *block = NULL, *cur_ptr, *blk_ptr; ++ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; ++ uint blk_offset, blk_len, copied; ++ int bytes, ret = 0; + ++ /* Check address range */ ++ if (len <= 0) ++ return 0; + -+/* -+ * bcm47xx_pcmcia_interrupt() -+ * -+ * Service routine for socket driver interrupts (requested by the -+ * low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()). -+ * -+ * The actual interrupt-servicing work is performed by -+ * bcm47xx_pcmcia_task(), largely because the Card Services event- -+ * handling code performs scheduling operations which cannot be -+ * executed from within an interrupt context. -+ */ -+static void -+bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs) -+{ -+ DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq); -+ schedule_task(&bcm47xx_pcmcia_task); -+} ++ sfl = &sflash; ++ if ((offset + len) > sfl->size) ++ return -1; + ++ blocksize = sfl->blocksize; ++ mask = blocksize - 1; + -+/* -+ * bcm47xx_pcmcia_register_callback() -+ * -+ * Implements the register_callback() operation for the in-kernel -+ * PCMCIA service (formerly SS_RegisterCallback in Card Services). If -+ * the function pointer `handler' is not NULL, remember the callback -+ * location in the state for `sock', and increment the usage counter -+ * for the driver module. (The callback is invoked from the interrupt -+ * service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services -+ * of interesting events.) Otherwise, clear the callback pointer in the -+ * socket state and decrement the module usage count. -+ * -+ * Returns: 0 -+ */ -+static int -+bcm47xx_pcmcia_register_callback(unsigned int sock, -+ void (*handler)(void *, unsigned int), void *info) -+{ -+ if (handler == NULL) { -+ pcmcia_socket[sock].handler = NULL; -+ MOD_DEC_USE_COUNT; -+ } else { -+ MOD_INC_USE_COUNT; -+ pcmcia_socket[sock].handler = handler; -+ pcmcia_socket[sock].handler_info = info; -+ } -+ return 0; -+} ++ /* Allocate a block of mem */ ++ if (!(block = MALLOC(NULL, blocksize))) ++ return -1; + ++ while (len) { ++ /* Align offset */ ++ cur_offset = offset & ~mask; ++ cur_length = blocksize; ++ cur_ptr = block; + -+/* -+ * bcm47xx_pcmcia_inquire_socket() -+ * -+ * Implements the inquire_socket() operation for the in-kernel PCMCIA -+ * service (formerly SS_InquireSocket in Card Services). Of note is -+ * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of -+ * `cap' to "trick" Card Services into tolerating large "I/O memory" -+ * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory -+ * resource database check. (Mapped memory is set up within the socket -+ * driver itself.) -+ * -+ * In conjunction with the STATIC_MAP capability is a new field, -+ * `io_offset', recommended by David Hinds. Rather than go through -+ * the SetIOMap interface (which is not quite suited for communicating -+ * window locations up from the socket driver), we just pass up -+ * an offset which is applied to client-requested base I/O addresses -+ * in alloc_io_space(). -+ * -+ * Returns: 0 on success, -1 if no pin has been configured for `sock' -+ */ -+static int -+bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap) -+{ -+ struct pcmcia_irq_info irq_info; ++ remainder = blocksize - (offset & mask); ++ if (len < remainder) ++ cur_retlen = len; ++ else ++ cur_retlen = remainder; + -+ if (sock >= socket_count) { -+ printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock); -+ return -1; -+ } ++ /* buf == NULL means erase only */ ++ if (buf) { ++ /* Copy existing data into holding block if necessary */ ++ if ((offset & mask) || (len < blocksize)) { ++ blk_offset = cur_offset; ++ blk_len = cur_length; ++ blk_ptr = cur_ptr; + -+ /* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the -+ * force_low argument to validate_mem() in rsrc_mgr.c -- since in -+ * general, the mapped * addresses of the PCMCIA memory regions -+ * will not be within 0xffff, setting force_low would be -+ * undesirable. -+ * -+ * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory -+ * resource database; we instead pass up physical address ranges -+ * and allow other parts of Card Services to deal with remapping. -+ * -+ * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but -+ * not 32-bit CardBus devices. -+ */ -+ cap->features = (SS_CAP_PAGE_REGS | SS_CAP_STATIC_MAP | SS_CAP_PCCARD); ++ /* Copy entire block */ ++ while (blk_len) { ++ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); ++ blk_offset += copied; ++ blk_len -= copied; ++ blk_ptr += copied; ++ } ++ } + -+ irq_info.sock = sock; -+ irq_info.irq = -1; ++ /* Copy input data into holding block */ ++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); ++ } + -+ if (pcmcia_low_level->get_irq_info(&irq_info) < 0) { -+ printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock); -+ return -1; -+ } ++ /* Erase block */ ++ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) ++ goto done; ++ while (sflash_poll(cc, (uint) cur_offset)); + -+ cap->irq_mask = 0; -+ cap->map_size = PAGE_SIZE; -+ cap->pci_irq = irq_info.irq; -+ cap->io_offset = pcmcia_socket[sock].virt_io; ++ /* buf == NULL means erase only */ ++ if (!buf) { ++ offset += cur_retlen; ++ len -= cur_retlen; ++ continue; ++ } + -+ return 0; -+} ++ /* Write holding block */ ++ while (cur_length > 0) { ++ if ((bytes = sflash_write(cc, ++ (uint) cur_offset, ++ (uint) cur_length, ++ (uchar *) cur_ptr)) < 0) { ++ ret = bytes; ++ goto done; ++ } ++ while (sflash_poll(cc, (uint) cur_offset)); ++ cur_offset += bytes; ++ cur_length -= bytes; ++ cur_ptr += bytes; ++ } + ++ offset += cur_retlen; ++ len -= cur_retlen; ++ buf += cur_retlen; ++ } + ++ ret = len; ++done: ++ if (block) ++ MFREE(NULL, block, blocksize); ++ return ret; ++} +diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c +--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/time.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,104 @@ +/* -+ * bcm47xx_pcmcia_get_status() -+ * -+ * Implements the get_status() operation for the in-kernel PCMCIA -+ * service (formerly SS_GetStatus in Card Services). Essentially just -+ * fills in bits in `status' according to internal driver state or -+ * the value of the voltage detect chipselect register. -+ * -+ * As a debugging note, during card startup, the PCMCIA core issues -+ * three set_socket() commands in a row the first with RESET deasserted, -+ * the second with RESET asserted, and the last with RESET deasserted -+ * again. Following the third set_socket(), a get_status() command will -+ * be issued. The kernel is looking for the SS_READY flag (see -+ * setup_socket(), reset_socket(), and unreset_socket() in cs.c). ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * Returns: 0 ++ * $Id: time.c,v 1.1.1.10 2006/02/27 03:42:55 honor Exp $ + */ -+static int -+bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status) -+{ -+ struct pcmcia_state state; ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ if ((pcmcia_low_level->socket_state(sock, &state)) < 0) { -+ printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n"); -+ return -1; -+ } ++/* Global SB handle */ ++extern void *bcm947xx_sbh; ++extern spinlock_t bcm947xx_sbh_lock; + -+ pcmcia_socket[sock].k_state = state; ++/* Convenience */ ++#define sbh bcm947xx_sbh ++#define sbh_lock bcm947xx_sbh_lock + -+ *status = state.detect ? SS_DETECT : 0; ++extern int panic_timeout; ++static int watchdog = 0; ++static u8 *mcr = NULL; + -+ *status |= state.ready ? SS_READY : 0; ++void __init ++bcm947xx_time_init(void) ++{ ++ unsigned int hz; ++ extifregs_t *eir; + -+ /* The power status of individual sockets is not available -+ * explicitly from the hardware, so we just remember the state -+ * and regurgitate it upon request: ++ /* ++ * Use deterministic values for initial counter interrupt ++ * so that calibrate delay avoids encountering a counter wrap. + */ -+ *status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0; ++ write_c0_count(0); ++ write_c0_compare(0xffff); + -+ if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD) -+ *status |= state.bvd1 ? SS_STSCHG : 0; -+ else { -+ if (state.bvd1 == 0) -+ *status |= SS_BATDEAD; -+ else if (state.bvd2 == 0) -+ *status |= SS_BATWARN; -+ } ++ if (!(hz = sb_cpu_clock(sbh))) ++ hz = 100000000; + -+ *status |= state.vs_3v ? SS_3VCARD : 0; ++ printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh), ++ (hz + 500000) / 1000000); + -+ *status |= state.vs_Xv ? SS_XVCARD : 0; ++ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ ++ mips_hpt_frequency = hz / 2; + -+ DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n", -+ (*status&SS_DETECT)?"DETECT ":"", -+ (*status&SS_READY)?"READY ":"", -+ (*status&SS_BATDEAD)?"BATDEAD ":"", -+ (*status&SS_BATWARN)?"BATWARN ":"", -+ (*status&SS_POWERON)?"POWERON ":"", -+ (*status&SS_STSCHG)?"STSCHG ":"", -+ (*status&SS_3VCARD)?"3VCARD ":"", -+ (*status&SS_XVCARD)?"XVCARD ":""); ++ /* Set watchdog interval in ms */ ++ watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0); + -+ return 0; -+} ++ /* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */ ++ if (watchdog > 0) { ++ if (watchdog < 3000) ++ watchdog = 3000; ++ } + ++ /* Set panic timeout in seconds */ ++ panic_timeout = watchdog / 1000; ++} + -+/* -+ * bcm47xx_pcmcia_get_socket() -+ * -+ * Implements the get_socket() operation for the in-kernel PCMCIA -+ * service (formerly SS_GetSocket in Card Services). Not a very -+ * exciting routine. -+ * -+ * Returns: 0 -+ */ -+static int -+bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state) ++static void ++bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ -+ DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); ++ /* Generic MIPS timer code */ ++ timer_interrupt(irq, dev_id, regs); + -+ /* This information was given to us in an earlier call to set_socket(), -+ * so we're just regurgitating it here: -+ */ -+ *state = pcmcia_socket[sock].cs_state; -+ return 0; ++ /* Set the watchdog timer to reset after the specified number of ms */ ++ if (watchdog > 0) ++ sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog); +} + ++static struct irqaction bcm947xx_timer_irqaction = { ++ bcm947xx_timer_interrupt, ++ SA_INTERRUPT, ++ 0, ++ "timer", ++ NULL, ++ NULL ++}; + -+/* -+ * bcm47xx_pcmcia_set_socket() -+ * -+ * Implements the set_socket() operation for the in-kernel PCMCIA -+ * service (formerly SS_SetSocket in Card Services). We more or -+ * less punt all of this work and let the kernel handle the details -+ * of power configuration, reset, &c. We also record the value of -+ * `state' in order to regurgitate it to the PCMCIA core later. -+ * -+ * Returns: 0 -+ */ -+static int -+bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state) -+{ -+ struct pcmcia_configure configure; -+ -+ DEBUG(2, "\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n" -+ "\tVcc %d Vpp %d irq %d\n", -+ (state->csc_mask == 0) ? "" : "", -+ (state->csc_mask & SS_DETECT) ? "DETECT " : "", -+ (state->csc_mask & SS_READY) ? "READY " : "", -+ (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "", -+ (state->csc_mask & SS_BATWARN) ? "BATWARN " : "", -+ (state->csc_mask & SS_STSCHG) ? "STSCHG " : "", -+ (state->flags == 0) ? "" : "", -+ (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "", -+ (state->flags & SS_IOCARD) ? "IOCARD " : "", -+ (state->flags & SS_RESET) ? "RESET " : "", -+ (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "", -+ (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "", -+ state->Vcc, state->Vpp, state->io_irq); -+ -+ configure.sock = sock; -+ configure.vcc = state->Vcc; -+ configure.vpp = state->Vpp; -+ configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0; -+ configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0; -+ configure.reset = (state->flags & SS_RESET) ? 1 : 0; -+ -+ if (pcmcia_low_level->configure_socket(&configure) < 0) { -+ printk(KERN_ERR "Unable to configure socket %u\n", sock); -+ return -1; -+ } -+ -+ pcmcia_socket[sock].cs_state = *state; -+ return 0; ++void __init ++bcm947xx_timer_setup(struct irqaction *irq) ++{ ++ /* Enable the timer interrupt */ ++ setup_irq(7, &bcm947xx_timer_irqaction); +} +diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in +--- linux.old/arch/mips/config-shared.in 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/config-shared.in 2006-10-02 21:19:59.000000000 +0200 +@@ -208,6 +208,14 @@ + fi + define_bool CONFIG_MIPS_RTC y + fi ++dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL ++dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM ++if [ "$CONFIG_BCM947XX" = "y" ] ; then ++ bool ' Support for Broadcom BCM4710' CONFIG_BCM4710 ++ bool ' Support for Broadcom BCM4310' CONFIG_BCM4310 ++ bool ' Support for Broadcom BCM4704' CONFIG_BCM4704 ++ bool ' Support for Broadcom BCM5365' CONFIG_BCM5365 ++fi + bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI + bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226 + bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229 +@@ -229,6 +237,11 @@ + define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n + + # ++# Provide an option for a default kernel command line ++# ++string 'Default kernel command string' CONFIG_CMDLINE "" + -+ -+/* -+ * bcm47xx_pcmcia_get_io_map() -+ * -+ * Implements the get_io_map() operation for the in-kernel PCMCIA -+ * service (formerly SS_GetIOMap in Card Services). Just returns an -+ * I/O map descriptor which was assigned earlier by a set_io_map(). -+ * -+ * Returns: 0 on success, -1 if the map index was out of range -+ */ -+static int -+bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map) ++# + # Select some configuration options automatically based on user selections. + # + if [ "$CONFIG_ACER_PICA_61" = "y" ]; then +@@ -554,6 +567,12 @@ + define_bool CONFIG_SWAP_IO_SPACE_L y + define_bool CONFIG_BOOT_ELF32 y + fi ++if [ "$CONFIG_BCM947XX" = "y" ] ; then ++ define_bool CONFIG_PCI y ++ define_bool CONFIG_NONCOHERENT_IO y ++ define_bool CONFIG_NEW_TIME_C y ++ define_bool CONFIG_NEW_IRQ y ++fi + if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then + define_bool CONFIG_ARC32 y + define_bool CONFIG_ARC_MEMORY y +@@ -1042,7 +1061,11 @@ + + bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE + bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG +-bool 'Remote GDB kernel debugging' CONFIG_KGDB ++if [ "$CONFIG_BCM947XX" = "y" ] ; then ++ bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG ++else ++ bool 'Remote GDB kernel debugging' CONFIG_KGDB ++fi + dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB + if [ "$CONFIG_KGDB" = "y" ]; then + define_bool CONFIG_DEBUG_INFO y +diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c +--- linux.old/arch/mips/kernel/cpu-probe.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-10-02 21:19:59.000000000 +0200 +@@ -162,7 +162,7 @@ + + static inline void cpu_probe_legacy(struct cpuinfo_mips *c) + { +- switch (c->processor_id & 0xff00) { ++ switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_R2000: + c->cputype = CPU_R2000; + c->isa_level = MIPS_CPU_ISA_I; +@@ -172,7 +172,7 @@ + c->tlbsize = 64; + break; + case PRID_IMP_R3000: +- if ((c->processor_id & 0xff) == PRID_REV_R3000A) ++ if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) + if (cpu_has_confreg()) + c->cputype = CPU_R3081E; + else +@@ -187,12 +187,12 @@ + break; + case PRID_IMP_R4000: + if (read_c0_config() & CONF_SC) { +- if ((c->processor_id & 0xff) >= PRID_REV_R4400) ++ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) + c->cputype = CPU_R4400PC; + else + c->cputype = CPU_R4000PC; + } else { +- if ((c->processor_id & 0xff) >= PRID_REV_R4400) ++ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) + c->cputype = CPU_R4400SC; + else + c->cputype = CPU_R4000SC; +@@ -438,7 +438,7 @@ + static inline void cpu_probe_mips(struct cpuinfo_mips *c) + { + decode_config1(c); +- switch (c->processor_id & 0xff00) { ++ switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_4KC: + c->cputype = CPU_4KC; + c->isa_level = MIPS_CPU_ISA_M32; +@@ -479,10 +479,10 @@ + { + decode_config1(c); + c->options |= MIPS_CPU_PREFETCH; +- switch (c->processor_id & 0xff00) { ++ switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_AU1_REV1: + case PRID_IMP_AU1_REV2: +- switch ((c->processor_id >> 24) & 0xff) { ++ switch ((c->processor_id >> 24) & PRID_REV_MASK) { + case 0: + c->cputype = CPU_AU1000; + break; +@@ -510,10 +510,34 @@ + } + } + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) +{ -+ DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock); -+ -+ if (map->map >= MAX_IO_WIN) { -+ printk(KERN_ERR "%s(): map (%d) out of range\n", -+ __FUNCTION__, map->map); -+ return -1; ++ decode_config1(c); ++ c->options |= MIPS_CPU_PREFETCH; ++ switch (c->processor_id & PRID_IMP_MASK) { ++ case PRID_IMP_BCM4710: ++ c->cputype = CPU_BCM4710; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; ++ c->scache.flags = MIPS_CACHE_NOT_PRESENT; ++ break; ++ case PRID_IMP_4KC: ++ case PRID_IMP_BCM3302: ++ c->cputype = CPU_BCM3302; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; ++ c->scache.flags = MIPS_CACHE_NOT_PRESENT; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; + } -+ -+ *map = pcmcia_socket[sock].io_map[map->map]; -+ return 0; +} + + static inline void cpu_probe_sibyte(struct cpuinfo_mips *c) + { + decode_config1(c); +- switch (c->processor_id & 0xff00) { ++ switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_SB1: + c->cputype = CPU_SB1; + c->isa_level = MIPS_CPU_ISA_M64; +@@ -535,7 +559,7 @@ + static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) + { + decode_config1(c); +- switch (c->processor_id & 0xff00) { ++ switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_SR71000: + c->cputype = CPU_SR71000; + c->isa_level = MIPS_CPU_ISA_M64; +@@ -560,7 +584,7 @@ + c->cputype = CPU_UNKNOWN; + + c->processor_id = read_c0_prid(); +- switch (c->processor_id & 0xff0000) { ++ switch (c->processor_id & PRID_COMP_MASK) { + + case PRID_COMP_LEGACY: + cpu_probe_legacy(c); +@@ -571,6 +595,9 @@ + case PRID_COMP_ALCHEMY: + cpu_probe_alchemy(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_SIBYTE: + cpu_probe_sibyte(c); + break; +diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S +--- linux.old/arch/mips/kernel/head.S 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/kernel/head.S 2006-10-02 21:19:59.000000000 +0200 +@@ -28,12 +28,20 @@ + #include + #include + ++#ifdef CONFIG_BCM4710 ++#undef eret ++#define eret nop; nop; eret ++#endif + -+/* -+ * bcm47xx_pcmcia_set_io_map() -+ * -+ * Implements the set_io_map() operation for the in-kernel PCMCIA -+ * service (formerly SS_SetIOMap in Card Services). We configure -+ * the map speed as requested, but override the address ranges -+ * supplied by Card Services. -+ * -+ * Returns: 0 on success, -1 on error -+ */ -+int -+bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map) -+{ -+ unsigned int speed; -+ unsigned long start; -+ -+ DEBUG(2, "\tmap %u speed %u\n\tstart 0x%08lx stop 0x%08lx\n" -+ "\tflags: %s%s%s%s%s%s%s%s\n", -+ map->map, map->speed, map->start, map->stop, -+ (map->flags == 0) ? "" : "", -+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", -+ (map->flags & MAP_16BIT) ? "16BIT " : "", -+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", -+ (map->flags & MAP_0WS) ? "0WS " : "", -+ (map->flags & MAP_WRPROT) ? "WRPROT " : "", -+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", -+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); -+ -+ if (map->map >= MAX_IO_WIN) { -+ printk(KERN_ERR "%s(): map (%d) out of range\n", -+ __FUNCTION__, map->map); -+ return -1; -+ } + .text ++ j kernel_entry ++ nop + -+ if (map->flags & MAP_ACTIVE) { -+ speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED; -+ pcmcia_socket[sock].speed_io = speed; + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. + */ +- .fill 0x400 ++ .fill 0x3f4 + + /* The following two symbols are used for kernel profiling. */ + EXPORT(stext) +diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c +--- linux.old/arch/mips/kernel/proc.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/kernel/proc.c 2006-10-02 21:19:59.000000000 +0200 +@@ -78,9 +78,10 @@ + [CPU_AU1550] "Au1550", + [CPU_24K] "MIPS 24K", + [CPU_AU1200] "Au1200", ++ [CPU_BCM4710] "BCM4710", ++ [CPU_BCM3302] "BCM3302", + }; + +- + static int show_cpuinfo(struct seq_file *m, void *v) + { + unsigned int version = current_cpu_data.processor_id; +diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c +--- linux.old/arch/mips/kernel/setup.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/kernel/setup.c 2006-10-02 21:19:59.000000000 +0200 +@@ -493,6 +493,7 @@ + void swarm_setup(void); + void hp_setup(void); + void au1x00_setup(void); ++ void brcm_setup(void); + void frame_info_init(void); + + frame_info_init(); +@@ -691,6 +692,11 @@ + pmc_yosemite_setup(); + break; + #endif ++#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310) ++ case MACH_GROUP_BRCM: ++ brcm_setup(); ++ break; ++#endif + default: + panic("Unsupported architecture"); + } +diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c +--- linux.old/arch/mips/kernel/traps.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/kernel/traps.c 2006-10-02 21:19:59.000000000 +0200 +@@ -920,6 +920,7 @@ + void __init trap_init(void) + { + extern char except_vec1_generic; ++ extern char except_vec2_generic; + extern char except_vec3_generic, except_vec3_r4000; + extern char except_vec_ejtag_debug; + extern char except_vec4; +@@ -927,6 +928,7 @@ + + /* Copy the generic exception handler code to it's final destination. */ + memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); ++ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80); + + /* + * Setup default vectors +@@ -985,6 +987,12 @@ + set_except_vector(13, handle_tr); + set_except_vector(22, handle_mdmx); + ++ if (current_cpu_data.cputype == CPU_SB1) { ++ /* Enable timer interrupt and scd mapped interrupt */ ++ clear_c0_status(0xf000); ++ set_c0_status(0xc00); + } + -+ start = map->start; -+ -+ if (map->stop == 1) { -+ map->stop = PAGE_SIZE - 1; -+ } + if (cpu_has_fpu && !cpu_has_nofpuex) + set_except_vector(15, handle_fpe); + +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/Makefile 2006-10-02 21:19:59.000000000 +0200 +@@ -726,6 +726,19 @@ + endif + + # ++# Broadcom BCM947XX variants ++# ++ifdef CONFIG_BCM947XX ++LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o ++SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx ++LOADADDR := 0x80001000 + -+ map->start = pcmcia_socket[sock].virt_io; -+ map->stop = map->start + (map->stop - start); -+ pcmcia_socket[sock].io_map[map->map] = *map; -+ DEBUG(2, "set_io_map %d start %x stop %x\n", -+ map->map, map->start, map->stop); -+ return 0; -+} ++zImage: vmlinux ++ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed ++export LOADADDR ++endif + ++# + # Choosing incompatible machines durings configuration will result in + # error messages during linking. Select a default linkscript if + # none has been choosen above. +@@ -778,6 +791,7 @@ + $(MAKE) -C arch/$(ARCH)/tools clean + $(MAKE) -C arch/mips/baget clean + $(MAKE) -C arch/mips/lasat clean ++ $(MAKE) -C arch/mips/bcm947xx/compressed clean + + archmrproper: + @$(MAKEBOOT) mrproper +diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c +--- linux.old/arch/mips/mm/c-r4k.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/mm/c-r4k.c 2006-10-02 21:19:59.000000000 +0200 +@@ -1166,3 +1166,47 @@ + build_clear_page(); + build_copy_page(); + } + -+/* -+ * bcm47xx_pcmcia_get_mem_map() -+ * -+ * Implements the get_mem_map() operation for the in-kernel PCMCIA -+ * service (formerly SS_GetMemMap in Card Services). Just returns a -+ * memory map descriptor which was assigned earlier by a -+ * set_mem_map() request. -+ * -+ * Returns: 0 on success, -1 if the map index was out of range -+ */ -+static int -+bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map) ++#ifdef CONFIG_BCM4704 ++static void __init mips32_icache_fill(unsigned long addr, uint nbytes) +{ -+ DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); -+ -+ if (map->map >= MAX_WIN) { -+ printk(KERN_ERR "%s(): map (%d) out of range\n", -+ __FUNCTION__, map->map); -+ return -1; -+ } -+ -+ *map = pcmcia_socket[sock].mem_map[map->map]; -+ return 0; ++ unsigned long ic_lsize = current_cpu_data.icache.linesz; ++ int i; ++ for (i = 0; i < nbytes; i += ic_lsize) ++ fill_icache_line((addr + i)); +} + -+ -+/* -+ * bcm47xx_pcmcia_set_mem_map() -+ * -+ * Implements the set_mem_map() operation for the in-kernel PCMCIA -+ * service (formerly SS_SetMemMap in Card Services). We configure -+ * the map speed as requested, but override the address ranges -+ * supplied by Card Services. -+ * -+ * Returns: 0 on success, -1 on error ++/* ++ * This must be run from the cache on 4704A0 ++ * so there are no mips core BIU ops in progress ++ * when the PFC is enabled. + */ -+static int -+bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map) ++#define PFC_CR0 0xff400000 /* control reg 0 */ ++#define PFC_CR1 0xff400004 /* control reg 1 */ ++static void __init enable_pfc(u32 mode) +{ -+ unsigned int speed; -+ unsigned long start; -+ u_long flags; -+ -+ if (map->map >= MAX_WIN) { -+ printk(KERN_ERR "%s(): map (%d) out of range\n", -+ __FUNCTION__, map->map); -+ return -1; -+ } ++ /* write range */ ++ *(volatile u32 *)PFC_CR1 = 0xffff0000; + -+ DEBUG(2, "\tmap %u speed %u\n\tsys_start %#lx\n" -+ "\tsys_stop %#lx\n\tcard_start %#x\n" -+ "\tflags: %s%s%s%s%s%s%s%s\n", -+ map->map, map->speed, map->sys_start, map->sys_stop, -+ map->card_start, (map->flags == 0) ? "" : "", -+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", -+ (map->flags & MAP_16BIT) ? "16BIT " : "", -+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", -+ (map->flags & MAP_0WS) ? "0WS " : "", -+ (map->flags & MAP_WRPROT) ? "WRPROT " : "", -+ (map->flags & MAP_ATTRIB) ? "ATTRIB " : "", -+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : ""); -+ -+ if (map->flags & MAP_ACTIVE) { -+ /* When clients issue RequestMap, the access speed is not always -+ * properly configured: -+ */ -+ speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED; ++ /* enable */ ++ *(volatile u32 *)PFC_CR0 = mode; ++} ++#endif + -+ /* TBD */ -+ if (map->flags & MAP_ATTRIB) { -+ pcmcia_socket[sock].speed_attr = speed; -+ } else { -+ pcmcia_socket[sock].speed_mem = speed; -+ } -+ } + -+ save_flags(flags); -+ cli(); -+ start = map->sys_start; ++void check_enable_mips_pfc(int val) ++{ + -+ if (map->sys_stop == 0) -+ map->sys_stop = PAGE_SIZE - 1; ++#ifdef CONFIG_BCM4704 ++ struct cpuinfo_mips *c = ¤t_cpu_data; + -+ if (map->flags & MAP_ATTRIB) { -+ map->sys_start = pcmcia_socket[sock].phys_attr + -+ map->card_start; -+ } else { -+ map->sys_start = pcmcia_socket[sock].phys_mem + -+ map->card_start; ++ /* enable prefetch cache */ ++ if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302) ++ && (read_c0_diag() & (1 << 29))) { ++ mips32_icache_fill((unsigned long) &enable_pfc, 64); ++ enable_pfc(val); + } -+ -+ map->sys_stop = map->sys_start + (map->sys_stop - start); -+ pcmcia_socket[sock].mem_map[map->map] = *map; -+ restore_flags(flags); -+ DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n", -+ map->map, map->sys_start, map->sys_stop, -+ map->card_start); -+ return 0; ++#endif +} + + -+#if defined(CONFIG_PROC_FS) -+ -+/* -+ * bcm47xx_pcmcia_proc_setup() -+ * -+ * Implements the proc_setup() operation for the in-kernel PCMCIA -+ * service (formerly SS_ProcSetup in Card Services). -+ * -+ * Returns: 0 on success, -1 on error -+ */ -+static void -+bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base) -+{ -+ struct proc_dir_entry *entry; -+ -+ if ((entry = create_proc_entry("status", 0, base)) == NULL) { -+ printk(KERN_ERR "Unable to install \"status\" procfs entry\n"); -+ return; +diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile +--- linux.old/arch/mips/pci/Makefile 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/arch/mips/pci/Makefile 2006-10-02 21:19:59.000000000 +0200 +@@ -13,7 +13,9 @@ + obj-$(CONFIG_MIPS_MSC) += ops-msc.o + obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o + obj-$(CONFIG_SNI_RM200_PCI) += ops-sni.o ++ifndef CONFIG_BCM947XX + obj-y += pci.o ++endif + obj-$(CONFIG_PCI_AUTO) += pci_auto.o + + include $(TOPDIR)/Rules.make +diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c +--- linux.old/drivers/char/serial.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/drivers/char/serial.c 2006-10-02 21:19:59.000000000 +0200 +@@ -444,6 +444,10 @@ + return inb(info->port+1); + #endif + case SERIAL_IO_MEM: ++#ifdef CONFIG_BCM4310 ++ readb((unsigned long) info->iomem_base + ++ (UART_SCR<iomem_reg_shift)); ++#endif + return readb((unsigned long) info->iomem_base + + (offset<iomem_reg_shift)); + default: +@@ -464,6 +468,9 @@ + case SERIAL_IO_MEM: + writeb(value, (unsigned long) info->iomem_base + + (offset<iomem_reg_shift)); ++#ifdef CONFIG_BCM4704 ++ *((volatile unsigned int *) KSEG1ADDR(0x18000000)); ++#endif + break; + default: + outb(value, info->port+offset); +@@ -1728,7 +1735,7 @@ + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) +- quot = baud_base / baud; ++ quot = (baud_base + (baud / 2)) / baud; + } + /* If the quotient is zero refuse the change */ + if (!quot && old_termios) { +@@ -1745,12 +1752,12 @@ + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) +- quot = baud_base / baud; ++ quot = (baud_base + (baud / 2)) / baud; + } + } + /* As a last resort, if the quotient is zero, default to 9600 bps */ + if (!quot) +- quot = baud_base / 9600; ++ quot = (baud_base + 4800) / 9600; + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates +@@ -5994,6 +6001,13 @@ + * Divisor, bytesize and parity + */ + state = rs_table + co->index; ++ /* ++ * Safe guard: state structure must have been initialized ++ */ ++ if (state->iomem_base == NULL) { ++ printk("!unable to setup serial console!\n"); ++ return -1; + } + if (doflow) + state->flags |= ASYNC_CONS_FLOW; + info = &async_sercons; +@@ -6007,7 +6021,7 @@ + info->io_type = state->io_type; + info->iomem_base = state->iomem_base; + info->iomem_reg_shift = state->iomem_reg_shift; +- quot = state->baud_base / baud; ++ quot = (state->baud_base + (baud / 2)) / baud; + cval = cflag & (CSIZE | CSTOPB); + #if defined(__powerpc__) || defined(__alpha__) + cval >>= 8; +diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile +--- linux.old/drivers/net/Makefile 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/drivers/net/Makefile 2006-10-02 21:19:59.000000000 +0200 +@@ -3,6 +3,8 @@ + # Makefile for the Linux network (ethercard) device drivers. + # + ++EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include + -+ entry->read_proc = bcm47xx_pcmcia_proc_status; -+ entry->data = (void *)sock; -+} -+ -+ -+/* -+ * bcm47xx_pcmcia_proc_status() -+ * -+ * Implements the /proc/bus/pccard/??/status file. -+ * -+ * Returns: the number of characters added to the buffer -+ */ -+static int -+bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos, -+ int count, int *eof, void *data) -+{ -+ char *p = buf; -+ unsigned int sock = (unsigned int)data; -+ -+ p += sprintf(p, "k_flags : %s%s%s%s%s%s%s\n", -+ pcmcia_socket[sock].k_state.detect ? "detect " : "", -+ pcmcia_socket[sock].k_state.ready ? "ready " : "", -+ pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "", -+ pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "", -+ pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "", -+ pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "", -+ pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : ""); -+ -+ p += sprintf(p, "status : %s%s%s%s%s%s%s%s%s\n", -+ pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "", -+ pcmcia_socket[sock].k_state.ready ? "SS_READY " : "", -+ pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "", -+ pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "", -+ (pcmcia_socket[sock].cs_state.flags & SS_IOCARD && -+ pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "", -+ ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && -+ (pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "", -+ ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && -+ (pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "", -+ pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "", -+ pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : ""); -+ -+ p += sprintf(p, "mask : %s%s%s%s%s\n", -+ pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "", -+ pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "", -+ pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "", -+ pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "", -+ pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : ""); -+ -+ p += sprintf(p, "cs_flags : %s%s%s%s%s\n", -+ pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ? -+ "SS_PWR_AUTO " : "", -+ pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? -+ "SS_IOCARD " : "", -+ pcmcia_socket[sock].cs_state.flags & SS_RESET ? -+ "SS_RESET " : "", -+ pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ? -+ "SS_SPKR_ENA " : "", -+ pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ? -+ "SS_OUTPUT_ENA " : ""); -+ -+ p += sprintf(p, "Vcc : %d\n", pcmcia_socket[sock].cs_state.Vcc); -+ p += sprintf(p, "Vpp : %d\n", pcmcia_socket[sock].cs_state.Vpp); -+ p += sprintf(p, "irq : %d\n", pcmcia_socket[sock].cs_state.io_irq); -+ p += sprintf(p, "I/O : %u\n", pcmcia_socket[sock].speed_io); -+ p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr); -+ p += sprintf(p, "common : %u\n", pcmcia_socket[sock].speed_mem); -+ return p-buf; -+} -+ -+ -+#endif /* defined(CONFIG_PROC_FS) */ -diff -Nur linux-2.4.32/drivers/pcmcia/bcm4710_pcmcia.c linux-2.4.32-brcm/drivers/pcmcia/bcm4710_pcmcia.c ---- linux-2.4.32/drivers/pcmcia/bcm4710_pcmcia.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/pcmcia/bcm4710_pcmcia.c 2005-12-16 23:39:11.368863250 +0100 -@@ -0,0 +1,266 @@ -+/* -+ * BCM4710 specific pcmcia routines. -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + obj-y := + obj-m := + obj-n := +diff -urN linux.old/drivers/parport/Config.in linux.dev/drivers/parport/Config.in +--- linux.old/drivers/parport/Config.in 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/drivers/parport/Config.in 2006-10-02 21:19:59.000000000 +0200 +@@ -11,6 +11,7 @@ + tristate 'Parallel port support' CONFIG_PARPORT + if [ "$CONFIG_PARPORT" != "n" ]; then + dep_tristate ' PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT ++ dep_tristate ' Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT + if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then + if [ "$CONFIG_SERIAL" = "m" ]; then + define_tristate CONFIG_PARPORT_PC_CML1 m +diff -urN linux.old/drivers/parport/Makefile linux.dev/drivers/parport/Makefile +--- linux.old/drivers/parport/Makefile 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/drivers/parport/Makefile 2006-10-02 21:19:59.000000000 +0200 +@@ -22,6 +22,7 @@ + + obj-$(CONFIG_PARPORT) += parport.o + obj-$(CONFIG_PARPORT_PC) += parport_pc.o ++obj-$(CONFIG_PARPORT_SPLINK) += parport_splink.o + obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o + obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o + obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o +diff -urN linux.old/drivers/parport/parport_splink.c linux.dev/drivers/parport/parport_splink.c +--- linux.old/drivers/parport/parport_splink.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/parport/parport_splink.c 2006-10-02 21:19:59.000000000 +0200 +@@ -0,0 +1,345 @@ ++/* Low-level parallel port routines for the ASUS WL-500g built-in port + * -+ * $Id: bcm4710_pcmcia.c,v 1.1 2005/03/16 13:50:00 wbx Exp $ ++ * Author: Nuno Grilo ++ * Based on parport_pc source + */ ++ ++#include +#include +#include -+#include -+#include +#include +#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#include ++#include ++#include + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "cs_internal.h" ++#define SPLINK_ADDRESS 0xBF800010 + -+#include -+#include -+#include ++#undef DEBUG + ++#ifdef DEBUG ++#define DPRINTK printk ++#else ++#define DPRINTK(stuff...) ++#endif + -+#include -+#include -+#include -+#include -+#include + -+#include "bcm4710pcmcia.h" ++/* __parport_splink_frob_control differs from parport_splink_frob_control in that ++ * it doesn't do any extra masking. */ ++static __inline__ unsigned char __parport_splink_frob_control (struct parport *p, ++ unsigned char mask, ++ unsigned char val) ++{ ++ struct parport_pc_private *priv = p->physport->private_data; ++ unsigned char *io = (unsigned char *) p->base; ++ unsigned char ctr = priv->ctr; ++#ifdef DEBUG_PARPORT ++ printk (KERN_DEBUG ++ "__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n", ++ mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); ++#endif ++ ctr = (ctr & ~mask) ^ val; ++ ctr &= priv->ctr_writable; /* only write writable bits. */ ++ *(io+2) = ctr; ++ priv->ctr = ctr; /* Update soft copy */ ++ return ctr; ++} ++ + -+/* Use a static var for irq dev_id */ -+static int bcm47xx_pcmcia_dev_id; + -+/* Do we think we have a card or not? */ -+static int bcm47xx_pcmcia_present = 0; ++static void parport_splink_data_forward (struct parport *p) ++{ ++ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); ++ __parport_splink_frob_control (p, 0x20, 0); ++} + ++static void parport_splink_data_reverse (struct parport *p) ++{ ++ DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n"); ++ __parport_splink_frob_control (p, 0x20, 0x20); ++} + -+static void bcm4710_pcmcia_reset(void) ++/* ++static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ -+ extifregs_t *eir; -+ unsigned long s; -+ uint32 out0, out1, outen; ++ DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n"); ++ parport_generic_irq(irq, (struct parport *) dev_id, regs); ++} ++*/ ++ ++static void parport_splink_enable_irq(struct parport *p) ++{ ++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n"); ++ __parport_splink_frob_control (p, 0x10, 0x10); ++} ++ ++static void parport_splink_disable_irq(struct parport *p) ++{ ++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n"); ++ __parport_splink_frob_control (p, 0x10, 0); ++} + ++static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s) ++{ ++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n"); ++ s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0); ++ if (dev->irq_func && ++ dev->port->irq != PARPORT_IRQ_NONE) ++ /* Set ackIntEn */ ++ s->u.pc.ctr |= 0x10; ++} + -+ eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); ++static void parport_splink_save_state(struct parport *p, struct parport_state *s) ++{ ++ const struct parport_pc_private *priv = p->physport->private_data; ++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n"); ++ s->u.pc.ctr = priv->ctr; ++} + -+ save_and_cli(s); ++static void parport_splink_restore_state(struct parport *p, struct parport_state *s) ++{ ++ struct parport_pc_private *priv = p->physport->private_data; ++ unsigned char *io = (unsigned char *) p->base; ++ unsigned char ctr = s->u.pc.ctr; + -+ /* Use gpio7 to reset the pcmcia slot */ -+ outen = readl(&eir->gpio[0].outen); -+ outen |= BCM47XX_PCMCIA_RESET; -+ out0 = readl(&eir->gpio[0].out); -+ out0 &= ~(BCM47XX_PCMCIA_RESET); -+ out1 = out0 | BCM47XX_PCMCIA_RESET; ++ DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n"); ++ *(io+2) = ctr; ++ priv->ctr = ctr; ++} + -+ writel(out0, &eir->gpio[0].out); -+ writel(outen, &eir->gpio[0].outen); -+ mdelay(1); -+ writel(out1, &eir->gpio[0].out); -+ mdelay(1); -+ writel(out0, &eir->gpio[0].out); ++static void parport_splink_setup_interrupt(void) { ++ return; ++} + -+ restore_flags(s); ++static void parport_splink_write_data(struct parport *p, unsigned char d) { ++ DPRINTK(KERN_DEBUG "parport_splink: write data called\n"); ++ unsigned char *io = (unsigned char *) p->base; ++ *io = d; +} + ++static unsigned char parport_splink_read_data(struct parport *p) { ++ DPRINTK(KERN_DEBUG "parport_splink: read data called\n"); ++ unsigned char *io = (unsigned char *) p->base; ++ return *io; ++} + -+static int bcm4710_pcmcia_init(struct pcmcia_init *init) ++static void parport_splink_write_control(struct parport *p, unsigned char d) +{ -+ struct pci_dev *pdev; -+ extifregs_t *eir; -+ uint32 outen, intp, intm, tmp; -+ uint16 *attrsp; -+ int rc = 0, i; -+ extern unsigned long bcm4710_cpu_cycle; -+ -+ -+ if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_EXTIF, NULL))) { -+ printk(KERN_ERR "bcm4710_pcmcia: extif not found\n"); -+ return -ENODEV; -+ } -+ eir = (extifregs_t *) ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); -+ -+ /* Initialize the pcmcia i/f: 16bit no swap */ -+ writel(CF_EM_PCMCIA | CF_DS | CF_EN, &eir->pcmcia_config); -+ -+#ifdef notYet -+ -+ /* Set the timing for memory accesses */ -+ tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ -+ tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ -+ tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ -+ tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ -+ writel(tmp, &eir->pcmcia_memwait); /* 0x01020a0c for a 100Mhz clock */ -+ -+ /* Set the timing for I/O accesses */ -+ tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ -+ tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ -+ tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ -+ tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ -+ writel(tmp, &eir->pcmcia_iowait); /* 0x01020a0c for a 100Mhz clock */ -+ -+ /* Set the timing for attribute accesses */ -+ tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ -+ tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ -+ tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ -+ tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ -+ writel(tmp, &eir->pcmcia_attrwait); /* 0x01020a0c for a 100Mhz clock */ -+ -+#endif -+ /* Make sure gpio0 and gpio5 are inputs */ -+ outen = readl(&eir->gpio[0].outen); -+ outen &= ~(BCM47XX_PCMCIA_WP | BCM47XX_PCMCIA_STSCHG | BCM47XX_PCMCIA_RESET); -+ writel(outen, &eir->gpio[0].outen); -+ -+ /* Issue a reset to the pcmcia socket */ -+ bcm4710_pcmcia_reset(); -+ -+#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS -+ /* Setup gpio5 to be the STSCHG interrupt */ -+ intp = readl(&eir->gpiointpolarity); -+ writel(intp | BCM47XX_PCMCIA_STSCHG, &eir->gpiointpolarity); /* Active low */ -+ intm = readl(&eir->gpiointmask); -+ writel(intm | BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Enable it */ -+#endif -+ -+ DEBUG(2, "bcm4710_pcmcia after reset:\n"); -+ DEBUG(2, "\textstatus\t= 0x%08x:\n", readl(&eir->extstatus)); -+ DEBUG(2, "\tpcmcia_config\t= 0x%08x:\n", readl(&eir->pcmcia_config)); -+ DEBUG(2, "\tpcmcia_memwait\t= 0x%08x:\n", readl(&eir->pcmcia_memwait)); -+ DEBUG(2, "\tpcmcia_attrwait\t= 0x%08x:\n", readl(&eir->pcmcia_attrwait)); -+ DEBUG(2, "\tpcmcia_iowait\t= 0x%08x:\n", readl(&eir->pcmcia_iowait)); -+ DEBUG(2, "\tgpioin\t\t= 0x%08x:\n", readl(&eir->gpioin)); -+ DEBUG(2, "\tgpio_outen0\t= 0x%08x:\n", readl(&eir->gpio[0].outen)); -+ DEBUG(2, "\tgpio_out0\t= 0x%08x:\n", readl(&eir->gpio[0].out)); -+ DEBUG(2, "\tgpiointpolarity\t= 0x%08x:\n", readl(&eir->gpiointpolarity)); -+ DEBUG(2, "\tgpiointmask\t= 0x%08x:\n", readl(&eir->gpiointmask)); -+ -+#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS -+ /* Request pcmcia interrupt */ -+ rc = request_irq(BCM47XX_PCMCIA_IRQ, init->handler, SA_INTERRUPT, -+ "PCMCIA Interrupt", &bcm47xx_pcmcia_dev_id); -+#endif ++ const unsigned char wm = (PARPORT_CONTROL_STROBE | ++ PARPORT_CONTROL_AUTOFD | ++ PARPORT_CONTROL_INIT | ++ PARPORT_CONTROL_SELECT); + -+ attrsp = (uint16 *)ioremap_nocache(EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF), 0x1000); -+ tmp = readw(&attrsp[0]); -+ DEBUG(2, "\tattr[0] = 0x%04x\n", tmp); -+ if ((tmp == 0x7fff) || (tmp == 0x7f00)) { -+ bcm47xx_pcmcia_present = 0; -+ } else { -+ bcm47xx_pcmcia_present = 1; ++ DPRINTK(KERN_DEBUG "parport_splink: write control called\n"); ++ /* Take this out when drivers have adapted to the newer interface. */ ++ if (d & 0x20) { ++ printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", ++ p->name, p->cad->name); ++ parport_splink_data_reverse (p); + } + -+ /* There's only one socket */ -+ return 1; ++ __parport_splink_frob_control (p, wm, d & wm); +} + -+static int bcm4710_pcmcia_shutdown(void) ++static unsigned char parport_splink_read_control(struct parport *p) +{ -+ extifregs_t *eir; -+ uint32 intm; -+ -+ eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); -+ -+ /* Disable the pcmcia i/f */ -+ writel(0, &eir->pcmcia_config); -+ -+ /* Reset gpio's */ -+ intm = readl(&eir->gpiointmask); -+ writel(intm & ~BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Disable it */ -+ -+ free_irq(BCM47XX_PCMCIA_IRQ, &bcm47xx_pcmcia_dev_id); -+ -+ return 0; ++ const unsigned char wm = (PARPORT_CONTROL_STROBE | ++ PARPORT_CONTROL_AUTOFD | ++ PARPORT_CONTROL_INIT | ++ PARPORT_CONTROL_SELECT); ++ DPRINTK(KERN_DEBUG "parport_splink: read control called\n"); ++ const struct parport_pc_private *priv = p->physport->private_data; ++ return priv->ctr & wm; /* Use soft copy */ +} + -+static int -+bcm4710_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) ++static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask, ++ unsigned char val) +{ -+ extifregs_t *eir; -+ -+ eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); -+ ++ const unsigned char wm = (PARPORT_CONTROL_STROBE | ++ PARPORT_CONTROL_AUTOFD | ++ PARPORT_CONTROL_INIT | ++ PARPORT_CONTROL_SELECT); + -+ if (sock != 0) { -+ printk(KERN_ERR "bcm4710 socket_state bad sock %d\n", sock); -+ return -1; ++ DPRINTK(KERN_DEBUG "parport_splink: frob control called\n"); ++ /* Take this out when drivers have adapted to the newer interface. */ ++ if (mask & 0x20) { ++ printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", ++ p->name, p->cad->name, ++ (val & 0x20) ? "reverse" : "forward"); ++ if (val & 0x20) ++ parport_splink_data_reverse (p); ++ else ++ parport_splink_data_forward (p); + } + -+ if (bcm47xx_pcmcia_present) { -+ state->detect = 1; -+ state->ready = 1; -+ state->bvd1 = 1; -+ state->bvd2 = 1; -+ state->wrprot = (readl(&eir->gpioin) & BCM47XX_PCMCIA_WP) == BCM47XX_PCMCIA_WP; -+ state->vs_3v = 0; -+ state->vs_Xv = 0; -+ } else { -+ state->detect = 0; -+ state->ready = 0; -+ } ++ /* Restrict mask and val to control lines. */ ++ mask &= wm; ++ val &= wm; + -+ return 1; ++ return __parport_splink_frob_control (p, mask, val); +} + -+ -+static int bcm4710_pcmcia_get_irq_info(struct pcmcia_irq_info *info) ++static unsigned char parport_splink_read_status(struct parport *p) +{ -+ if (info->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; -+ -+ info->irq = BCM47XX_PCMCIA_IRQ; -+ -+ return 0; ++ DPRINTK(KERN_DEBUG "parport_splink: read status called\n"); ++ unsigned char *io = (unsigned char *) p->base; ++ return *(io+1); +} + -+ -+static int -+bcm4710_pcmcia_configure_socket(const struct pcmcia_configure *configure) ++static void parport_splink_inc_use_count(void) +{ -+ if (configure->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; ++#ifdef MODULE ++ MOD_INC_USE_COUNT; ++#endif ++} + ++static void parport_splink_dec_use_count(void) ++{ ++#ifdef MODULE ++ MOD_DEC_USE_COUNT; ++#endif ++} + -+ DEBUG(2, "Vcc %dV Vpp %dV output %d speaker %d reset %d\n", configure->vcc, -+ configure->vpp, configure->output, configure->speaker, configure->reset); ++static struct parport_operations parport_splink_ops = ++{ ++ parport_splink_write_data, ++ parport_splink_read_data, + -+ if ((configure->vcc != 50) || (configure->vpp != 50)) { -+ printk("%s: bad Vcc/Vpp (%d:%d)\n", __FUNCTION__, configure->vcc, -+ configure->vpp); -+ } ++ parport_splink_write_control, ++ parport_splink_read_control, ++ parport_splink_frob_control, + -+ if (configure->reset) { -+ /* Issue a reset to the pcmcia socket */ -+ DEBUG(1, "%s: Reseting socket\n", __FUNCTION__); -+ bcm4710_pcmcia_reset(); -+ } ++ parport_splink_read_status, + ++ parport_splink_enable_irq, ++ parport_splink_disable_irq, + -+ return 0; -+} ++ parport_splink_data_forward, ++ parport_splink_data_reverse, + -+struct pcmcia_low_level bcm4710_pcmcia_ops = { -+ bcm4710_pcmcia_init, -+ bcm4710_pcmcia_shutdown, -+ bcm4710_pcmcia_socket_state, -+ bcm4710_pcmcia_get_irq_info, -+ bcm4710_pcmcia_configure_socket -+}; ++ parport_splink_init_state, ++ parport_splink_save_state, ++ parport_splink_restore_state, + -diff -Nur linux-2.4.32/drivers/pcmcia/bcm4710pcmcia.h linux-2.4.32-brcm/drivers/pcmcia/bcm4710pcmcia.h ---- linux-2.4.32/drivers/pcmcia/bcm4710pcmcia.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/pcmcia/bcm4710pcmcia.h 2005-12-16 23:39:11.368863250 +0100 -@@ -0,0 +1,118 @@ -+/* -+ * -+ * bcm47xx pcmcia driver -+ * -+ * Copyright 2004, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Based on sa1100.h and include/asm-arm/arch-sa1100/pcmica.h -+ * from www.handhelds.org, -+ * and au1000_generic.c from oss.sgi.com. -+ * -+ * $Id: bcm4710pcmcia.h,v 1.1 2005/03/16 13:50:00 wbx Exp $ -+ */ ++ parport_splink_inc_use_count, ++ parport_splink_dec_use_count, + -+#if !defined(_BCM4710PCMCIA_H) -+#define _BCM4710PCMCIA_H ++ parport_ieee1284_epp_write_data, ++ parport_ieee1284_epp_read_data, ++ parport_ieee1284_epp_write_addr, ++ parport_ieee1284_epp_read_addr, + -+#include -+#include -+#include -+#include -+#include "cs_internal.h" ++ parport_ieee1284_ecp_write_data, ++ parport_ieee1284_ecp_read_data, ++ parport_ieee1284_ecp_write_addr, + ++ parport_ieee1284_write_compat, ++ parport_ieee1284_read_nibble, ++ parport_ieee1284_read_byte, ++}; + -+/* The 47xx can only support one socket */ -+#define BCM47XX_PCMCIA_MAX_SOCK 1 ++/* --- Initialisation code -------------------------------- */ + -+/* In the bcm947xx gpio's are used for some pcmcia functions */ -+#define BCM47XX_PCMCIA_WP 0x01 /* Bit 0 is WP input */ -+#define BCM47XX_PCMCIA_STSCHG 0x20 /* Bit 5 is STSCHG input/interrupt */ -+#define BCM47XX_PCMCIA_RESET 0x80 /* Bit 7 is RESET */ ++static struct parport *parport_splink_probe_port (unsigned long int base) ++{ ++ struct parport_pc_private *priv; ++ struct parport_operations *ops; ++ struct parport *p; + -+#define BCM47XX_PCMCIA_IRQ 2 ++ if (check_mem_region(base, 3)) { ++ printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base); ++ return NULL; ++ } ++ priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL); ++ if (!priv) { ++ printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base); ++ return NULL; ++ } ++ ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL); ++ if (!ops) { ++ printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n", ++ base); ++ kfree (priv); ++ return NULL; ++ } ++ memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations)); ++ priv->ctr = 0xc; ++ priv->ctr_writable = 0xff; + -+/* The socket driver actually works nicely in interrupt-driven form, -+ * so the (relatively infrequent) polling is "just to be sure." -+ */ -+#define BCM47XX_PCMCIA_POLL_PERIOD (2 * HZ) ++ if (!(p = parport_register_port(base, PARPORT_IRQ_NONE, ++ PARPORT_DMA_NONE, ops))) { ++ printk (KERN_DEBUG "parport (0x%lx): registration failed!\n", ++ base); ++ kfree (priv); ++ kfree (ops); ++ return NULL; ++ } + -+#define BCM47XX_PCMCIA_IO_SPEED (255) -+#define BCM47XX_PCMCIA_MEM_SPEED (300) ++ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT; ++ p->size = (p->modes & PARPORT_MODE_EPP)?8:3; ++ p->private_data = priv; + ++ parport_proc_register(p); ++ request_mem_region (p->base, 3, p->name); + -+struct pcmcia_state { -+ unsigned detect: 1, -+ ready: 1, -+ bvd1: 1, -+ bvd2: 1, -+ wrprot: 1, -+ vs_3v: 1, -+ vs_Xv: 1; -+}; ++ /* Done probing. Now put the port into a sensible start-up state. */ ++ parport_splink_write_data(p, 0); ++ parport_splink_data_forward (p); + ++ /* Now that we've told the sharing engine about the port, and ++ found out its characteristics, let the high-level drivers ++ know about it. */ ++ parport_announce_port (p); + -+struct pcmcia_configure { -+ unsigned sock: 8, -+ vcc: 8, -+ vpp: 8, -+ output: 1, -+ speaker: 1, -+ reset: 1; -+}; ++ DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n", ++ base); ++ return p; ++} + -+struct pcmcia_irq_info { -+ unsigned int sock; -+ unsigned int irq; -+}; ++static void parport_splink_unregister_port(struct parport *p) { ++ struct parport_pc_private *priv = p->private_data; ++ struct parport_operations *ops = p->ops; + -+/* This structure encapsulates per-socket state which we might need to -+ * use when responding to a Card Services query of some kind. -+ */ -+struct bcm47xx_pcmcia_socket { -+ socket_state_t cs_state; -+ struct pcmcia_state k_state; -+ unsigned int irq; -+ void (*handler)(void *, unsigned int); -+ void *handler_info; -+ pccard_io_map io_map[MAX_IO_WIN]; -+ pccard_mem_map mem_map[MAX_WIN]; -+ ioaddr_t virt_io, phys_attr, phys_mem; -+ unsigned short speed_io, speed_attr, speed_mem; -+}; ++ if (p->irq != PARPORT_IRQ_NONE) ++ free_irq(p->irq, p); ++ release_mem_region(p->base, 3); ++ parport_proc_unregister(p); ++ kfree (priv); ++ parport_unregister_port(p); ++ kfree (ops); ++} + -+struct pcmcia_init { -+ void (*handler)(int irq, void *dev, struct pt_regs *regs); -+}; + -+struct pcmcia_low_level { -+ int (*init)(struct pcmcia_init *); -+ int (*shutdown)(void); -+ int (*socket_state)(unsigned sock, struct pcmcia_state *); -+ int (*get_irq_info)(struct pcmcia_irq_info *); -+ int (*configure_socket)(const struct pcmcia_configure *); -+}; ++int parport_splink_init(void) ++{ ++ int ret; ++ ++ DPRINTK(KERN_DEBUG "parport_splink init called\n"); ++ parport_splink_setup_interrupt(); ++ ret = !parport_splink_probe_port(SPLINK_ADDRESS); ++ ++ return ret; ++} + -+extern struct pcmcia_low_level bcm47xx_pcmcia_ops; ++void parport_splink_cleanup(void) { ++ struct parport *p = parport_enumerate(), *tmp; ++ DPRINTK(KERN_DEBUG "parport_splink cleanup called\n"); ++ if (p->size) { ++ if (p->modes & PARPORT_MODE_PCSPP) { ++ while(p) { ++ tmp = p->next; ++ parport_splink_unregister_port(p); ++ p = tmp; ++ } ++ } ++ } ++} + -+/* I/O pins replacing memory pins -+ * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75) -+ * -+ * These signals change meaning when going from memory-only to -+ * memory-or-I/O interface: -+ */ -+#define iostschg bvd1 -+#define iospkr bvd2 ++MODULE_AUTHOR("Nuno Grilo "); ++MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port"); ++MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port"); ++MODULE_LICENSE("GPL"); + ++module_init(parport_splink_init) ++module_exit(parport_splink_cleanup) + -+/* -+ * Declaration for implementation specific low_level operations. -+ */ -+extern struct pcmcia_low_level bcm4710_pcmcia_ops; -+ -+#endif /* !defined(_BCM4710PCMCIA_H) */ -diff -Nur linux-2.4.32/drivers/pcmcia/Makefile linux-2.4.32-brcm/drivers/pcmcia/Makefile ---- linux-2.4.32/drivers/pcmcia/Makefile 2004-02-18 14:36:31.000000000 +0100 -+++ linux-2.4.32-brcm/drivers/pcmcia/Makefile 2005-12-16 23:39:11.364863000 +0100 -@@ -65,6 +65,10 @@ - au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o - au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o - -+obj-$(CONFIG_PCMCIA_BCM4710) += bcm4710_ss.o -+bcm4710_ss-objs := bcm4710_generic.o -+bcm4710_ss-objs += bcm4710_pcmcia.o -+ - obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o - obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o - obj-$(CONFIG_PCMCIA_SIBYTE) += sibyte_generic.o -@@ -102,5 +106,8 @@ - au1x00_ss.o: $(au1000_ss-objs-y) - $(LD) -r -o $@ $(au1000_ss-objs-y) - -+bcm4710_ss.o: $(bcm4710_ss-objs) -+ $(LD) -r -o $@ $(bcm4710_ss-objs) -+ - yenta_socket.o: $(yenta_socket-objs) - $(LD) $(LD_RFLAG) -r -o $@ $(yenta_socket-objs) -diff -Nur linux-2.4.32/include/asm-mips/bootinfo.h linux-2.4.32-brcm/include/asm-mips/bootinfo.h ---- linux-2.4.32/include/asm-mips/bootinfo.h 2004-02-18 14:36:32.000000000 +0100 -+++ linux-2.4.32-brcm/include/asm-mips/bootinfo.h 2005-12-16 23:39:11.400865250 +0100 +diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h +--- linux.old/include/asm-mips/bootinfo.h 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/include/asm-mips/bootinfo.h 2006-10-02 21:19:59.000000000 +0200 @@ -37,6 +37,7 @@ #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */ #define MACH_GROUP_LASAT 21 @@ -19565,7 +16690,7 @@ diff -Nur linux-2.4.32/include/asm-mips/bootinfo.h linux-2.4.32-brcm/include/asm /* * Valid machtype values for group unknown (low order halfword of mips_machtype) -@@ -194,6 +195,15 @@ +@@ -197,6 +198,15 @@ #define MACH_TANBAC_TB0229 7 /* TANBAC TB0229 (VR4131DIMM) */ /* @@ -19581,9 +16706,9 @@ diff -Nur linux-2.4.32/include/asm-mips/bootinfo.h linux-2.4.32-brcm/include/asm * Valid machtype for group TITAN */ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ -diff -Nur linux-2.4.32/include/asm-mips/cpu.h linux-2.4.32-brcm/include/asm-mips/cpu.h ---- linux-2.4.32/include/asm-mips/cpu.h 2005-01-19 15:10:11.000000000 +0100 -+++ linux-2.4.32-brcm/include/asm-mips/cpu.h 2005-12-16 23:39:11.412866000 +0100 +diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h +--- linux.old/include/asm-mips/cpu.h 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/include/asm-mips/cpu.h 2006-10-02 21:19:59.000000000 +0200 @@ -22,6 +22,11 @@ spec. */ @@ -19632,10 +16757,10 @@ diff -Nur linux-2.4.32/include/asm-mips/cpu.h linux-2.4.32-brcm/include/asm-mips /* * ISA Level encodings -diff -Nur linux-2.4.32/include/asm-mips/r4kcache.h linux-2.4.32-brcm/include/asm-mips/r4kcache.h ---- linux-2.4.32/include/asm-mips/r4kcache.h 2004-02-18 14:36:32.000000000 +0100 -+++ linux-2.4.32-brcm/include/asm-mips/r4kcache.h 2005-12-16 23:39:11.416866250 +0100 -@@ -567,4 +567,17 @@ +diff -urN linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h +--- linux.old/include/asm-mips/r4kcache.h 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/include/asm-mips/r4kcache.h 2006-10-02 21:19:59.000000000 +0200 +@@ -658,4 +658,17 @@ cache128_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -19653,9 +16778,9 @@ diff -Nur linux-2.4.32/include/asm-mips/r4kcache.h linux-2.4.32-brcm/include/asm +} + #endif /* __ASM_R4KCACHE_H */ -diff -Nur linux-2.4.32/include/asm-mips/serial.h linux-2.4.32-brcm/include/asm-mips/serial.h ---- linux-2.4.32/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100 -+++ linux-2.4.32-brcm/include/asm-mips/serial.h 2005-12-16 23:39:11.428867000 +0100 +diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h +--- linux.old/include/asm-mips/serial.h 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/include/asm-mips/serial.h 2006-10-02 21:19:59.000000000 +0200 @@ -223,6 +223,13 @@ #define TXX927_SERIAL_PORT_DEFNS #endif @@ -19678,10 +16803,10 @@ diff -Nur linux-2.4.32/include/asm-mips/serial.h linux-2.4.32-brcm/include/asm-m COBALT_SERIAL_PORT_DEFNS \ DDB5477_SERIAL_PORT_DEFNS \ EV96100_SERIAL_PORT_DEFNS \ -diff -Nur linux-2.4.32/init/do_mounts.c linux-2.4.32-brcm/init/do_mounts.c ---- linux-2.4.32/init/do_mounts.c 2003-11-28 19:26:21.000000000 +0100 -+++ linux-2.4.32-brcm/init/do_mounts.c 2005-12-16 23:39:11.504871750 +0100 -@@ -253,7 +253,13 @@ +diff -urN linux.old/init/do_mounts.c linux.dev/init/do_mounts.c +--- linux.old/init/do_mounts.c 2006-10-02 21:23:10.000000000 +0200 ++++ linux.dev/init/do_mounts.c 2006-10-02 21:19:59.000000000 +0200 +@@ -254,7 +254,13 @@ { "ftlb", 0x2c08 }, { "ftlc", 0x2c10 }, { "ftld", 0x2c18 },