X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/5be70dfb578c8793084aa8b4526fad08d68a6155..aea7a72fb9fe9c86010022366fba33c66a06514a:/package/madwifi/Makefile

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index 2d952d114..3c72bc730 100644
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -10,20 +10,21 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_VERSION:=0.9.2
+PKG_REV:=3053
+PKG_VERSION:=r$(PKG_REV)
+PKG_BRANCH:=madwifi-dfs
 PKG_RELEASE:=1
 
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_MD5SUM:=a75baacbe07085ddc5cb28e1fb43edbb
-PKG_CAT:=bzcat
+PKG_SOURCE_PROTO:=svn
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BRANCH)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-RATE_CONTROL:=sample
-
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf
 endif
@@ -33,29 +34,47 @@ endif
 ifeq ($(ARCH),i386)
   HAL_TARGET:=i386-elf
 endif
+ifeq ($(ARCH),i686)
+  HAL_TARGET:=i386-elf
+endif
 ifeq ($(ARCH),armeb)
   HAL_TARGET:=xscale-be-elf
 endif
+ifeq ($(ARCH),arm)
+  HAL_TARGET:=xscale-le-elf
+endif
 ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif
 
-BUS:=PCI
-ifneq ($(CONFIG_LINUX_2_4_AR531X),)
+ifneq ($(CONFIG_TARGET_atheros),)
   BUS:=AHB
-endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
-  BUS:=PCI AHB	# no suitable HAL for AHB yet.
+  HAL_TARGET:=ap51
+else
+  ifneq ($(CONFIG_PCI_SUPPORT),)
+    BUS:=PCI
+  endif
 endif
 
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_uml),)
+ BUS:=
 endif
 
+RATE_CONTROL:=minstrel
+
+MADWIFI_FILES:= \
+	$(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
 MADWIFI_AUTOLOAD:= \
 	wlan \
 	wlan_scan_ap \
@@ -66,80 +85,81 @@ MADWIFI_AUTOLOAD:= \
 	wlan_ccmp \
 	wlan_tkip \
 	wlan_wep \
-	wlan_xauth
+	wlan_xauth \
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
-	MADWIFI_AUTOLOAD += ath_ahb
+	MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+	MADWIFI_AUTOLOAD+= ath_ahb
 endif
 ifeq ($(findstring PCI,$(BUS)),PCI)
-	MADWIFI_AUTOLOAD += ath_pci
+	MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+	MADWIFI_AUTOLOAD+= ath_pci
 endif
 
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
-  DEPENDS:=+wireless-tools
-  DESCRIPTION:=\
-	This package contains a driver for Atheros 802.11a/b/g chipsets.
   URL:=http://madwifi.org/
-  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-  FILES:= \
-		$(PKG_BUILD_DIR)/ath/ath_hal.$(LINUX_KMOD_SUFFIX) \
-		$(BUS_MODULES) \
-		$(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
 
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-		PATH="$(TARGET_PATH)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		TARGET="$(HAL_TARGET)" \
-		TOOLPREFIX="$(KERNEL_CROSS)" \
-		TOOLPATH="$(KERNEL_CROSS)" \
-		KERNELPATH="$(LINUX_DIR)" \
-		LDOPTS=" " \
-		ATH_RATE="ath_rate/$(RATE_CONTROL)" \
-		DOMULTI=1
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
+endef
+
+MAKE_ARGS:= \
+	PATH="$(TARGET_PATH)" \
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	TARGET="$(HAL_TARGET)" \
+	TOOLPREFIX="$(KERNEL_CROSS)" \
+	TOOLPATH="$(KERNEL_CROSS)" \
+	KERNELPATH="$(LINUX_DIR)" \
+	LDOPTS="--no-warn-mismatch " \
+	ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+	WARNINGS="" \
+	DOMULTI=1
+
+MAKE_VARS:= \
+	COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   define Build/Compile/ahb
-	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" modules
+	$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+	$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
   endef
 endif
 
 ifeq ($(findstring PCI,$(BUS)),PCI)
   define Build/Compile/pci
-	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" modules
+	$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+	$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
   endef
 endif
 
+define Build/Configure
+	$(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
+endef
+
 define Build/Compile
 	$(call Build/Compile/ahb)
 	$(call Build/Compile/pci)
-	$(MAKE) $(MADWIFI_MAKEOPTS) \
-		CFLAGS="$(TARGET_CFLAGS)" \
-		tools
 endef
 
 define Build/InstallDev
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi
-	$(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
-	$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
-endef
-
-define Build/UninstallDev
-	rm -rf	$(STAGING_DIR)/usr/include/madwifi
+	mkdir -p $(1)/usr/include/madwifi
+	$(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+	mkdir -p $(1)/usr/include/madwifi/net80211
+	$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
 endef
 
 define KernelPackage/madwifi/install
-	mkdir -p $(1)/etc/init.d
-	mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
-	mkdir -p $(1)/usr/sbin
-	install -m0755 ./files/madwifi.init $(1)/etc/init.d/madwifi
-	$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/lib/wifi
+	$(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211stats,athchans,athctrl,athkey,athstats,wlanconfig} $(1)/usr/sbin/
 endef
 
 $(eval $(call KernelPackage,madwifi))