X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/5db41b5518f6e1ca133bc938bf46cd02882d9337..a808a8e5276ff8e3012d1b54b9c3f29744889620:/target/linux/ramips/base-files/etc/uci-defaults/network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 5891b480c..7e58ef043 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -9,39 +9,6 @@ if [ ! -x /usr/sbin/maccalc ]; then
 	return
 fi
 
-ramips_get_mac_binary()
-{
-	local mtdname="$1"
-	local seek="$2"
-	local part
-
-	part=$(find_mtd_part "$mtdname")
-	if [ -z "$part" ]; then
-		echo "ramips_get_mac_binary: partition $mtdname not found!" >&2
-		return
-	fi
-
-	dd bs=1 skip=$seek count=6 if=$part 2>/dev/null | /usr/sbin/maccalc bin2mac
-}
-
-ramips_get_mac_nvram()
-{
-	local mtdname="$1"
-	local key="$2"
-	local part
-	local mac_dirty
-
-	part=$(find_mtd_part "$mtdname")
-	if [ -z "$part" ]; then
-		echo "ramips_get_mac_nvram: partition $mtdname not found!" >&2
-		return
-	fi
-
-	mac_dirty=$(strings "$part" | sed -n 's/'"$key"'=//p')
-	# "canonicalize" mac
-	maccalc add "$mac_dirty" 0
-}
-
 ramips_setup_interfaces()
 {
 	local board="$1"
@@ -52,10 +19,23 @@ ramips_setup_interfaces()
 	argus-atp52b | \
 	b2c | \
 	f5d8235-v2 | \
-	nw718)
+	nw718 | \
+	w502u)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		;;
+
+	wl-351)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "rtl8366rb" "1" "1"
+		ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
+		ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+		;;
+
+	wli-tx4-ag300n)
+		ucidef_set_interface_lan "eth0"
 		;;
 
+	f5d8235-v1 | \
 	rt-n15)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "rtl8366s" "1" "1"
@@ -88,11 +68,36 @@ ramips_setup_macs()
 
 	argus-atp52b | \
 	b2c | \
+	f5d8235-v1 | \
 	nw718 | \
-	rt-n15)
+	rt-n15 | \
+	wl-351)
 		lan_mac=$(ramips_get_mac_binary factory 4)
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 		;;
+
+	dir-300-b1 |\
+	dir-300-b2 |\
+	dir-600-b1)
+		lan_mac=$(ramips_get_mac_binary devdata 16388)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	esr-9753 | \
+	nbg-419n)
+                lan_mac=$(ramips_get_mac_binary factory 4)
+                wan_mac=$(ramips_get_mac_binary factory 40)
+		;;
+
+	w502u)
+                lan_mac=$(ramips_get_mac_binary factory 40)
+                wan_mac=$(ramips_get_mac_binary factory 46)
+		;;
+
+	wli-tx4-ag300n)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		;;
+
 	esac
 
 	[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac