X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/7d51245340742956d612c8a569f904d3a946135f..6f30b3374c635b7cf0f988c166f8afc0602395da:/README

diff --git a/README b/README
index d718e5971..2bba6fa6f 100644
--- a/README
+++ b/README
@@ -1,29 +1,24 @@
-This is the buildsystem for the OpenWrt Linux Distribution
-It is a modified uClibc buildroot2.
+This is the buildsystem for the OpenWrt Linux distribution
 
 Please use "make menuconfig" to configure your appreciated
 configuration for the toolchain and firmware.
 
-Simply running 'make' will build your firmware and a tarball
-of kernel modules. It will download all sources, build the 
-cross-compile toolchain, the kernel and all choosen applications.
+You need to have installed gcc, binutils, patch, bzip2, flex, bison,
+make, gettext, pkg-config, unzip, libz-dev and libc headers.
 
-You can use flash.sh for remotely updating your embedded system
+Simply running 'make' will build your firmware.
+It will download all sources, build the cross-compile toolchain, 
+the kernel and all choosen applications.
+
+You can use scripts/flash.sh for remotely updating your embedded system
 via tftp.
 
+The buildroot system is documented in docs/buildroot-documentation.html.
 
-There are some cleanup targets we would like to explain.
-"make clean" will only clean the firmware images and the root
-filesystem. "make dirclean" will remove the extracted kernel source
-and all exctracted software. (busybox,bridge-utils,..), but will
-preserve your toolchain. (compiler,linker,..)
-"make distclean" will remove everything, including the toolchain, 
-all downloaded source code archives and your firmware configuration. 
-You can cleanup separate directories by using "make application-dirclean" 
-and rebuild the firmware with "make".
+Building your own firmware you need to have access to a Linux system.
 
-Be happy..
-	Your OpenWRT Project
-	http://www.openwrt.org
+Sunshine!
+	Your OpenWrt Project
+	http://openwrt.org