X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/856089e5a98f8bda361be71533556272b5c63c6c..aa132e5ca8045ed91a2a3b22485c8359aa26e015:/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch diff --git a/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch b/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch index 0d69114d3..538ef69a1 100644 --- a/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch +++ b/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch @@ -1,7 +1,7 @@ -diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig ---- linux-2.6.12.5/arch/mips/Kconfig 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/Kconfig 2005-09-03 21:53:36.323284896 +0200 -@@ -40,6 +40,15 @@ +diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig +--- linux.old/arch/mips/Kconfig 2005-12-15 13:26:49.758027500 +0100 ++++ linux.dev/arch/mips/Kconfig 2005-12-15 12:57:27.889182500 +0100 +@@ -244,6 +244,17 @@ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and Olivetti M700-10 workstations. @@ -10,44 +10,20 @@ diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU -+ select CPU_LITTLE_ENDIAN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN + help + Support for BCM947xx based boards -+ - config ACER_PICA_61 - bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" - depends on MACH_JAZZ && EXPERIMENTAL -@@ -974,7 +983,7 @@ - - config CPU_LITTLE_ENDIAN - bool "Generate little endian code" -- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA -+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM947XX - default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 - help - Some MIPS machines can be configured for either little or big endian -diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile ---- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-09-03 22:24:07.794917120 +0200 -@@ -79,7 +79,7 @@ - cflags-y += -I $(TOPDIR)/include/asm/gcc - cflags-y += -G 0 -mno-abicalls -fno-pic -pipe - cflags-y += $(call cc-option, -finline-limit=100000) --LDFLAGS_vmlinux += -G 0 -static -n -+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib - MODFLAGS += -mlong-calls - - cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer -@@ -170,6 +170,7 @@ - cflags-$(CONFIG_CPU_MIPS32) += \ - $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ - -Wa,--trap -+cflags-$(CONFIG_CPU_MIPS32) += -Wa,--trap - - cflags-$(CONFIG_CPU_MIPS64) += \ - $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \ -@@ -618,6 +619,14 @@ - load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 ++ + config LASAT + bool "Support for LASAT Networks platforms" + select DMA_NONCOHERENT +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/Makefile 2005-12-15 12:57:27.921168500 +0100 +@@ -689,6 +689,13 @@ + load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # +# Broadcom BCM47XX boards @@ -56,46 +32,45 @@ diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefi +cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include +load-$(CONFIG_BCM947XX) := 0xffffffff80001000 + -+ +# # SNI RM200 PCI # core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile ---- linux-2.6.12.5/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile 2005-08-28 11:12:20.406862800 +0200 +diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile +--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/Makefile 2005-12-15 14:32:03.580639500 +0100 @@ -0,0 +1,6 @@ +# +# Makefile for the BCM47xx specific kernel interface routines +# under Linux. +# + -+obj-y := irq.o int-handler.o prom.o setup.o time.o -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile 2005-08-28 11:12:20.407862648 +0200 ++obj-y := irq.o int-handler.o prom.o setup.o time.o pci.o +diff -urN linux.old/arch/mips/bcm947xx/broadcom/Makefile linux.dev/arch/mips/bcm947xx/broadcom/Makefile +--- linux.old/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/Makefile 2005-12-17 20:51:17.749271000 +0100 @@ -0,0 +1,6 @@ +# +# Makefile for the BCM47xx specific kernel interface routines +# under Linux. +# -+ -+obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-08-28 11:12:20.408862496 +0200 -@@ -0,0 +1,685 @@ -+/* -+ * Misc useful routines to access NIC SROM ++ ++obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o sflash.o nvram.o cfe_env.o +diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c +--- linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-12-17 01:21:23.007883000 +0100 +@@ -0,0 +1,481 @@ ++/* ++ * Misc useful routines to access NIC SROM/OTP . + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ + */ + +#include @@ -104,76 +79,66 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br +#include +#include +#include -+#include +#include ++#include + +#include /* for sprom content groking */ + +#define VARS_MAX 4096 /* should be reduced */ + -+static int initvars_srom_pci(void *curmap, char **vars, int *count); -+static int initvars_cis_pcmcia(void *osh, char **vars, int *count); -+static int sprom_cmd_pcmcia(void *osh, uint8 cmd); -+static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data); -+static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data); -+static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc); ++#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */ ++#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */ ++ ++static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count); ++static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc); ++ ++static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count); + +/* -+ * Initialize the vars from the right source for this platform. ++ * Initialize local vars from the right source for this platform. + * Return 0 on success, nonzero on error. + */ +int -+srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count) ++srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count) +{ -+ if (vars == NULL) ++ ASSERT(bustype == BUSTYPE(bustype)); ++ if (vars == NULL || count == NULL) + return (0); + -+ switch (bus) { -+ case SB_BUS: -+ /* These two could be asserts ... */ -+ *vars = NULL; -+ *count = 0; -+ return(0); ++ switch (BUSTYPE(bustype)) { + + case PCI_BUS: + ASSERT(curmap); /* can not be NULL */ -+ return(initvars_srom_pci(curmap, vars, count)); -+ -+ case PCMCIA_BUS: -+ return(initvars_cis_pcmcia(osh, vars, count)); -+ ++ return initvars_srom_pci(sbh, curmap, vars, count); + + default: -+ ASSERT(0); ++ return 0; + } + return (-1); +} + -+ +/* support only 16-bit word read from srom */ +int -+srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) ++srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) +{ + void *srom; -+ uint i, off, nw; ++ uint off, nw; ++ ++ ASSERT(bustype == BUSTYPE(bustype)); + + /* check input - 16-bit access only */ + if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) + return 1; + -+ if (bus == PCI_BUS) { ++ off = byteoff / 2; ++ nw = nbytes / 2; ++ ++ if (BUSTYPE(bustype) == PCI_BUS) { + if (!curmap) + return 1; -+ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET); -+ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE)) ++ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET; ++ if (sprom_read_pci(srom, off, buf, nw, FALSE)) + return 1; -+ } else if (bus == PCMCIA_BUS) { -+ off = byteoff / 2; -+ nw = nbytes / 2; -+ for (i = 0; i < nw; i++) { -+ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) -+ return 1; -+ } + } else { + return 1; + } @@ -183,7 +148,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br + +/* support only 16-bit word write into srom */ +int -+srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) ++srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) +{ + uint16 *srom; + uint i, off, nw, crc_range; @@ -191,23 +156,25 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br + uint8 crc; + volatile uint32 val32; + ++ ASSERT(bustype == BUSTYPE(bustype)); ++ + /* check input - 16-bit access only */ + if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) + return 1; + -+ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; ++ crc_range = (((BUSTYPE(bustype) == SDIO_BUS)) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; + + /* if changes made inside crc cover range */ + if (byteoff < crc_range) { + nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; + /* read data including entire first 64 words from srom */ -+ if (srom_read(bus, curmap, osh, 0, nw * 2, image)) ++ if (srom_read(bustype, curmap, osh, 0, nw * 2, image)) + return 1; + /* make changes */ + bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); + /* calculate crc */ + htol16_buf(image, crc_range); -+ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); ++ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); + ltoh16_buf(image, crc_range); + image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); + p = image; @@ -218,344 +185,161 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br + nw = nbytes / 2; + } + -+ if (bus == PCI_BUS) { -+ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET); ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET); + /* enable writes to the SPROM */ + val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); + val32 |= SPROM_WRITEEN; + OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); -+ bcm_mdelay(500); ++ bcm_mdelay(WRITE_ENABLE_DELAY); + /* write srom */ + for (i = 0; i < nw; i++) { + W_REG(&srom[off + i], p[i]); -+ bcm_mdelay(20); ++ bcm_mdelay(WRITE_WORD_DELAY); + } + /* disable writes to the SPROM */ + OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); -+ } else if (bus == PCMCIA_BUS) { -+ /* enable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WEN)) -+ return 1; -+ bcm_mdelay(500); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]); -+ bcm_mdelay(20); -+ } -+ /* disable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WDS)) -+ return 1; + } else { + return 1; + } + -+ bcm_mdelay(500); -+ return 0; -+} -+ -+ -+int -+srom_parsecis(uint8 *cis, char **vars, int *count) -+{ -+ char eabuf[32]; -+ char *vp, *base; -+ uint8 tup, tlen, sromrev = 1; -+ int i, j; -+ uint varsize; -+ bool ag_init = FALSE; -+ uint16 w; -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ base = vp = MALLOC(VARS_MAX); -+ ASSERT(vp); -+ -+ i = 0; -+ do { -+ tup = cis[i++]; -+ tlen = cis[i++]; -+ -+ switch (tup) { -+ case CISTPL_MANFID: -+ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); -+ vp++; -+ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); -+ vp++; -+ break; -+ -+ case CISTPL_FUNCE: -+ if (cis[i] == LAN_NID) { -+ ASSERT(cis[i + 1] == ETHER_ADDR_LEN); -+ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; -+ } -+ break; -+ -+ case CISTPL_CFTABLE: -+ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); -+ vp++; -+ break; -+ -+ case CISTPL_BRCM_HNBU: -+ switch (cis[i]) { -+ case HNBU_CHIPID: -+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]); -+ vp++; -+ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]); -+ vp++; -+ if (tlen == 7) { -+ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]); -+ vp++; -+ } -+ break; -+ -+ case HNBU_BOARDREV: -+ vp += sprintf(vp, "boardrev=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_AA: -+ vp += sprintf(vp, "aa0=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_AG: -+ vp += sprintf(vp, "ag0=%d", cis[i + 1]); -+ vp++; -+ ag_init = TRUE; -+ break; -+ -+ case HNBU_CC: -+ vp += sprintf(vp, "cc=%d", cis[i + 1]); -+ vp++; -+ break; -+ -+ case HNBU_PAPARMS: -+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]); -+ vp++; -+ if (tlen == 9) { -+ /* New version */ -+ for (j = 0; j < 3; j++) { -+ vp += sprintf(vp, "pa0b%d=%d", j, -+ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]); -+ vp++; -+ } -+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); -+ vp++; -+ } -+ break; -+ -+ case HNBU_OEM: -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4], -+ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]); -+ vp++; -+ break; -+ case HNBU_BOARDFLAGS: -+ w = (cis[i + 2] << 8) + cis[i + 1]; -+ if (w == 0xffff) w = 0; -+ vp += sprintf(vp, "boardflags=%d", w); -+ vp++; -+ break; -+ case HNBU_LED: -+ if (cis[i + 1] != 0xff) { -+ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]); -+ vp++; -+ } -+ if (cis[i + 2] != 0xff) { -+ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]); -+ vp++; -+ } -+ if (cis[i + 3] != 0xff) { -+ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]); -+ vp++; -+ } -+ if (cis[i + 4] != 0xff) { -+ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]); -+ vp++; -+ } -+ break; -+ } -+ break; -+ -+ } -+ i += tlen; -+ } while (tup != 0xff); -+ -+ /* Set the srom version */ -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; -+ -+ /* For now just set boardflags2 to zero */ -+ vp += sprintf(vp, "boardflags2=0"); -+ vp++; -+ -+ /* if there is no antenna gain field, set default */ -+ if (ag_init == FALSE) { -+ vp += sprintf(vp, "ag0=%d", 0xff); -+ vp++; -+ } -+ -+ /* final nullbyte terminator */ -+ *vp++ = '\0'; -+ varsize = (uint)vp - (uint)base; -+ -+ ASSERT(varsize < VARS_MAX); -+ -+ if (varsize == VARS_MAX) { -+ *vars = base; -+ } else { -+ vp = MALLOC(varsize); -+ ASSERT(vp); -+ bcopy(base, vp, varsize); -+ MFREE(base, VARS_MAX); -+ *vars = vp; -+ } -+ *count = varsize; -+ -+ return (0); -+} -+ -+ -+/* set PCMCIA sprom command register */ -+static int -+sprom_cmd_pcmcia(void *osh, uint8 cmd) -+{ -+ uint8 status; -+ uint wait_cnt = 1000; -+ -+ /* write sprom command register */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); -+ -+ /* wait status */ -+ while (wait_cnt--) { -+ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); -+ if (status & SROM_DONE) -+ return 0; -+ } -+ return 1; -+} -+ -+/* read a word from the PCMCIA srom */ -+static int -+sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; -+ -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); -+ -+ /* do read */ -+ if (sprom_cmd_pcmcia(osh, SROM_READ)) -+ return 1; -+ -+ /* read data */ -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); -+ -+ *data = (data_h << 8) | data_l; ++ bcm_mdelay(WRITE_ENABLE_DELAY); + return 0; +} + -+/* write a word to the PCMCIA srom */ -+static int -+sprom_write_pcmcia(void *osh, uint16 addr, uint16 data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; -+ -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ data_l = (uint8)(data & 0xff); -+ data_h = (uint8)((data >> 8) & 0xff); -+ -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); -+ -+ /* write data */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); -+ -+ /* do write */ -+ return sprom_cmd_pcmcia(osh, SROM_WRITE); -+} + +/* + * Read in and validate sprom. + * Return 0 on success, nonzero on error. + */ +static int -+sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc) ++sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc) +{ -+ int off, nw; -+ uint8 chk8; -+ int i; -+ -+ off = byteoff / 2; -+ nw = ROUNDUP(nbytes, 2) / 2; ++ int err = 0; ++ uint i; + + /* read the sprom */ -+ for (i = 0; i < nw; i++) -+ buf[i] = R_REG(&sprom[off + i]); ++ for (i = 0; i < nwords; i++) ++ buf[i] = R_REG(&sprom[wordoff + i]); + + if (check_crc) { + /* fixup the endianness so crc8 will pass */ -+ htol16_buf(buf, nw * 2); -+ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE) -+ return (1); ++ htol16_buf(buf, nwords * 2); ++ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) ++ err = 1; + /* now correct the endianness of the byte array */ -+ ltoh16_buf(buf, nw * 2); ++ ltoh16_buf(buf, nwords * 2); + } ++ ++ return err; ++} + -+ return (0); ++/* ++* Create variable table from memory. ++* Return 0 on success, nonzero on error. ++*/ ++static int ++initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count) ++{ ++ int c = (int)(end - start); ++ ++ /* do it only when there is more than just the null string */ ++ if (c > 1) { ++ char *vp = MALLOC(osh, c); ++ ASSERT(vp); ++ if (!vp) ++ return BCME_NOMEM; ++ bcopy(start, vp, c); ++ *vars = vp; ++ *count = c; ++ } ++ else { ++ *vars = NULL; ++ *count = 0; ++ } ++ ++ return 0; +} + +/* + * Initialize nonvolatile variable table from sprom. + * Return 0 on success, nonzero on error. + */ -+ +static int -+initvars_srom_pci(void *curmap, char **vars, int *count) ++initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count) +{ + uint16 w, b[64]; + uint8 sromrev; + struct ether_addr ea; + char eabuf[32]; -+ int c, woff, i; ++ uint32 w32; ++ int woff, i; + char *vp, *base; ++ osl_t *osh = sb_osh(sbh); ++ int err; + -+ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE)) -+ return (-1); ++ /* ++ * Apply CRC over SROM content regardless SROM is present or not, ++ * and use variable sromrev's existance in flash to decide ++ * if we should return an error when CRC fails or read SROM variables ++ * from flash. ++ */ ++ sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE); + + /* top word of sprom contains version and crc8 */ + sromrev = b[63] & 0xff; -+ if ((sromrev != 1) && (sromrev != 2)) { ++ /* bcm4401 sroms misprogrammed */ ++ if (sromrev == 0x10) ++ sromrev = 1; ++ ++ /* srom version check */ ++ if (sromrev > 3) + return (-2); -+ } + + ASSERT(vars); + ASSERT(count); + -+ base = vp = MALLOC(VARS_MAX); ++ base = vp = MALLOC(osh, VARS_MAX); + ASSERT(vp); ++ if (!vp) ++ return -2; + + vp += sprintf(vp, "sromrev=%d", sromrev); + vp++; + -+ if (sromrev >= 2) { -+ /* New section takes over the 4th hardware function space */ ++ if (sromrev >= 3) { ++ /* New section takes over the 3th hardware function space */ ++ ++ /* Words 22+23 are 11a (mid) ofdm power offsets */ ++ w32 = ((uint32)b[23] << 16) | b[22]; ++ vp += sprintf(vp, "ofdmapo=%d", w32); ++ vp++; ++ ++ /* Words 24+25 are 11a (low) ofdm power offsets */ ++ w32 = ((uint32)b[25] << 16) | b[24]; ++ vp += sprintf(vp, "ofdmalpo=%d", w32); ++ vp++; + -+ /* Word 28 is boardflags2 */ -+ vp += sprintf(vp, "boardflags2=%d", b[28]); ++ /* Words 26+27 are 11a (high) ofdm power offsets */ ++ w32 = ((uint32)b[27] << 16) | b[26]; ++ vp += sprintf(vp, "ofdmahpo=%d", w32); + vp++; + ++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ ++ w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8); ++ vp += sprintf(vp, "gpiotimerval=%d", w32); ++ ++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ ++ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) | /* oncount*/ ++ ((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */ ++ vp += sprintf(vp, "gpiotimerval=%d", w32); ++ ++ vp++; ++ } ++ ++ if (sromrev >= 2) { ++ /* New section takes over the 4th hardware function space */ ++ + /* Word 29 is max power 11a high/low */ + w = b[29]; + vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); @@ -705,9 +489,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br + vp++; + + /* Word 57 is boardflags, if not programmed make it zero */ -+ w = b[57]; -+ if (w == 0xffff) w = 0; -+ vp += sprintf(vp, "boardflags=%d", w); ++ w32 = (uint32)b[57]; ++ if (w32 == 0xffff) w32 = 0; ++ if (sromrev > 1) { ++ /* Word 28 is the high bits of boardflags */ ++ w32 |= (uint32)b[28] << 16; ++ } ++ vp += sprintf(vp, "boardflags=%d", w32); + vp++; + + /* Word 58 is antenna gain 0/1 */ @@ -726,72 +514,57 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br + ((b[61] >> 8) & 0xff), (b[61] & 0xff), + ((b[62] >> 8) & 0xff), (b[62] & 0xff)); + vp++; ++ } else if (sromrev == 2) { ++ /* Word 60 OFDM tx power offset from CCK level */ ++ /* OFDM Power Offset - opo */ ++ vp += sprintf(vp, "opo=%d", b[60] & 0xff); ++ vp++; ++ } else { ++ /* Word 60: cck power offsets */ ++ vp += sprintf(vp, "cckpo=%d", b[60]); ++ vp++; ++ ++ /* Words 61+62: 11g ofdm power offsets */ ++ w32 = ((uint32)b[62] << 16) | b[61]; ++ vp += sprintf(vp, "ofdmgpo=%d", w32); ++ vp++; + } + + /* final nullbyte terminator */ + *vp++ = '\0'; + -+ c = vp - base; -+ ASSERT(c <= VARS_MAX); -+ -+ if (c == VARS_MAX) { -+ *vars = base; -+ } else { -+ vp = MALLOC(c); -+ ASSERT(vp); -+ bcopy(base, vp, c); -+ MFREE(base, VARS_MAX); -+ *vars = vp; -+ } -+ *count = c; -+ -+ return (0); -+} -+ -+/* -+ * Read the cis and call parsecis to initialize the vars. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_cis_pcmcia(void *osh, char **vars, int *count) -+{ -+ uint8 *cis = NULL; -+ int rc; -+ -+ if ((cis = MALLOC(CIS_SIZE)) == NULL) -+ return (-1); -+ -+ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE); -+ -+ rc = srom_parsecis(cis, vars, count); -+ -+ MFREE(cis, CIS_SIZE); -+ -+ return (rc); ++ ASSERT((vp - base) <= VARS_MAX); ++ ++ err = initvars_table(osh, base, vp, vars, count); ++ ++ MFREE(osh, base, VARS_MAX); ++ return err; +} + -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200 -@@ -0,0 +1,691 @@ +diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c +--- linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-12-17 17:53:52.387365000 +0100 +@@ -0,0 +1,356 @@ +/* + * Misc useful OS-independent routines. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ + */ + +#include +#include ++#include ++#include +#include +#include -+#include ++#include + +unsigned char bcm_ctype[] = { + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ @@ -890,104 +663,34 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-b + return (n); +} + -+void -+deadbeef(char *p, uint len) -+{ -+ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef }; -+ -+ while (len-- > 0) { -+ *p = meat[((uint)p) & 3]; -+ p++; -+ } -+} -+ -+/* pretty hex print a contiguous buffer */ -+void -+prhex(char *msg, uchar *buf, uint nbytes) -+{ -+ char line[256]; -+ char* p; -+ uint i; -+ -+ if (msg && (msg[0] != '\0')) -+ printf("%s: ", msg); -+ -+ p = line; -+ for (i = 0; i < nbytes; i++) { -+ if (i % 16 == 0) { -+ p += sprintf(p, "%04d: ", i); /* line prefix */ -+ } -+ p += sprintf(p, "%02x ", buf[i]); -+ if (i % 16 == 15) { -+ printf("%s\n", line); /* flush line */ -+ p = line; -+ } -+ } -+ -+ /* flush last partial line */ -+ if (p != line) -+ printf("%s\n", line); -+} -+ -+/* pretty hex print a pkt buffer chain */ -+void -+prpkt(char *msg, void *drv, void *p0) -+{ -+ void *p; -+ -+ if (msg && (msg[0] != '\0')) -+ printf("%s: ", msg); -+ -+ for (p = p0; p; p = PKTNEXT(drv, p)) -+ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p)); -+} -+ -+/* copy a pkt buffer chain into a buffer */ -+uint -+pktcopy(void *drv, void *p, uint offset, int len, uchar *buf) ++/* return pointer to location of substring 'needle' in 'haystack' */ ++char* ++bcmstrstr(char *haystack, char *needle) +{ -+ uint n, ret = 0; -+ -+ if (len < 0) -+ len = 4096; /* "infinite" */ -+ -+ /* skip 'offset' bytes */ -+ for (; p && offset; p = PKTNEXT(drv, p)) { -+ if (offset < (uint)PKTLEN(drv, p)) -+ break; -+ offset -= PKTLEN(drv, p); -+ } ++ int len, nlen; ++ int i; + -+ if (!p) -+ return 0; ++ if ((haystack == NULL) || (needle == NULL)) ++ return (haystack); + -+ /* copy the data */ -+ for (; p && len; p = PKTNEXT(drv, p)) { -+ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len); -+ bcopy(PKTDATA(drv, p) + offset, buf, n); -+ buf += n; -+ len -= n; -+ ret += n; -+ offset = 0; -+ } ++ nlen = strlen(needle); ++ len = strlen(haystack) - nlen + 1; + -+ return ret; ++ for (i = 0; i < len; i++) ++ if (bcmp(needle, &haystack[i], nlen) == 0) ++ return (&haystack[i]); ++ return (NULL); +} + -+/* return total length of buffer chain */ -+uint -+pkttotlen(void *drv, void *p) ++char* ++bcmstrcat(char *dest, const char *src) +{ -+ uint total; -+ -+ total = 0; -+ for (; p; p = PKTNEXT(drv, p)) -+ total += PKTLEN(drv, p); -+ return (total); ++ strcpy(&dest[strlen(dest)], src); ++ return (dest); +} + + -+uchar* ++char* +bcm_ether_ntoa(char *ea, char *buf) +{ + sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", @@ -1011,123 +714,113 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-b + return (i == 6); +} + -+/* -+ * Traverse a string of 1-byte tag/1-byte length/variable-length value -+ * triples, returning a pointer to the substring whose first element -+ * matches tag. Stop parsing when we see an element whose ID is greater -+ * than the target key. -+ */ -+bcm_tlv_t * -+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key) -+{ -+ bcm_tlv_t *elt; -+ int totlen; -+ -+ elt = (bcm_tlv_t*)buf; -+ totlen = buflen; -+ -+ /* find tagged parameter */ -+ while (totlen >= 2) { -+ uint id = elt->id; -+ int len = elt->len; -+ -+ /* Punt if we start seeing IDs > than target key */ -+ if (id > key) -+ return(NULL); -+ -+ /* validate remaining totlen */ -+ if ((id == key) && (totlen >= (len + 2))) -+ return (elt); ++void ++bcm_mdelay(uint ms) ++{ ++ uint i; + -+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); -+ totlen -= (len + 2); ++ for (i = 0; i < ms; i++) { ++ OSL_DELAY(1000); + } -+ return NULL; +} + -+ -+/* -+ * Traverse a string of 1-byte tag/1-byte length/variable-length value -+ * triples, returning a pointer to the substring whose first element -+ * matches tag ++/* ++ * Search the name=value vars for a specific one and return its value. ++ * Returns NULL if not found. + */ -+bcm_tlv_t * -+bcm_parse_tlvs(void *buf, int buflen, uint key) ++char* ++getvar(char *vars, char *name) +{ -+ bcm_tlv_t *elt; -+ int totlen; -+ -+ elt = (bcm_tlv_t*)buf; -+ totlen = buflen; ++ char *s; ++ int len; + -+ /* find tagged parameter */ -+ while (totlen >= 2) { -+ int len = elt->len; ++ len = strlen(name); + -+ /* validate remaining totlen */ -+ if ((elt->id == key) && (totlen >= (len + 2))) -+ return (elt); ++ /* first look in vars[] */ ++ for (s = vars; s && *s; ) { ++ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) ++ return (&s[len+1]); + -+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); -+ totlen -= (len + 2); ++ while (*s++) ++ ; + } -+ -+ return NULL; ++ ++ /* then query nvram */ ++ return (BCMINIT(nvram_get)(name)); +} + -+void -+pktqinit(struct pktq *q, int maxlen) ++/* ++ * Search the vars for a specific one and return its value as ++ * an integer. Returns 0 if not found. ++ */ ++int ++getintvar(char *vars, char *name) +{ -+ q->head = q->tail = NULL; -+ q->maxlen = maxlen; -+ q->len = 0; ++ char *val; ++ ++ if ((val = getvar(vars, name)) == NULL) ++ return (0); ++ ++ return (bcm_strtoul(val, NULL, 0)); +} + -+void -+pktenq(struct pktq *q, void *p, bool lifo) -+{ -+ ASSERT(PKTLINK(p) == NULL); + -+ PKTSETLINK(p, NULL); ++/* Search for token in comma separated token-string */ ++static int ++findmatch(char *string, char *name) ++{ ++ uint len; ++ char *c; + -+ if (q->tail == NULL) { -+ ASSERT(q->head == NULL); -+ q->head = q->tail = p; -+ } -+ else { -+ ASSERT(q->head); -+ ASSERT(PKTLINK(q->tail) == NULL); -+ if (lifo) { -+ PKTSETLINK(p, q->head); -+ q->head = p; -+ } else { -+ PKTSETLINK(q->tail, p); -+ q->tail = p; -+ } ++ len = strlen(name); ++ while ((c = strchr(string, ',')) != NULL) { ++ if (len == (uint)(c - string) && !strncmp(string, name, len)) ++ return 1; ++ string = c + 1; + } -+ q->len++; ++ ++ return (!strcmp(string, name)); +} + -+void* -+pktdeq(struct pktq *q) ++/* Return gpio pin number assigned to the named pin */ ++/* ++* Variable should be in format: ++* ++* gpio=pin_name,pin_name ++* ++* This format allows multiple features to share the gpio with mutual ++* understanding. ++* ++* 'def_pin' is returned if a specific gpio is not defined for the requested functionality ++* and if def_pin is not used by others. ++*/ ++uint ++getgpiopin(char *vars, char *pin_name, uint def_pin) +{ -+ void *p; ++ char name[] = "gpioXXXX"; ++ char *val; ++ uint pin; + -+ if ((p = q->head)) { -+ ASSERT(q->tail); -+ q->head = PKTLINK(p); -+ PKTSETLINK(p, NULL); -+ q->len--; -+ if (q->head == NULL) -+ q->tail = NULL; ++ /* Go thru all possibilities till a match in pin name */ ++ for (pin = 0; pin < GPIO_NUMPINS; pin ++) { ++ sprintf(name, "gpio%d", pin); ++ val = getvar(vars, name); ++ if (val && findmatch(val, pin_name)) ++ return pin; + } -+ else { -+ ASSERT(q->tail == NULL); ++ ++ if (def_pin != GPIO_PIN_NOTDEFINED) { ++ /* make sure the default pin is not used by someone else */ ++ sprintf(name, "gpio%d", def_pin); ++ if (getvar(vars, name)) { ++ def_pin = GPIO_PIN_NOTDEFINED; ++ } + } + -+ return (p); ++ return def_pin; +} + ++ +/******************************************************************************* + * crc8 + * @@ -1184,61 +877,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-b + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F +}; + -+/* -+ * Search the name=value vars for a specific one and return its value. -+ * Returns NULL if not found. -+ */ -+char* -+getvar(char *vars, char *name) -+{ -+ char *s; -+ int len; -+ -+ len = strlen(name); -+ -+ /* first look in vars[] */ -+ for (s = vars; s && *s; ) { -+ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) -+ return (&s[len+1]); -+ -+ while (*s++) -+ ; -+ } -+ -+ /* then query nvram */ -+ return (nvram_get(name)); -+} -+ -+/* -+ * Search the vars for a specific one and return its value as -+ * an integer. Returns 0 if not found. -+ */ -+int -+getintvar(char *vars, char *name) -+{ -+ char *val; -+ -+ if ((val = getvar(vars, name)) == NULL) -+ return (0); -+ -+ return (bcm_strtoul(val, NULL, 0)); -+} -+ -+void -+bcm_mdelay(uint ms) -+{ -+ uint i; -+ -+ for (i = 0; i < ms; i++) { -+ OSL_DELAY(1000); -+ } -+} -+ +#define CRC_INNER_LOOP(n, c, x) \ + (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] + +uint8 -+crc8( ++hndcrc8( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint8 crc /* either CRC8_INIT_VALUE or previous return value */ @@ -1252,226 +895,18 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-b + return crc; +} + -+/******************************************************************************* -+ * crc16 -+ * -+ * Computes a crc16 over the input data using the polynomial: -+ * -+ * x^16 + x^12 +x^5 + 1 -+ * -+ * The caller provides the initial value (either CRC16_INIT_VALUE -+ * or the previous returned value) to allow for processing of -+ * discontiguous blocks of data. When generating the CRC the -+ * caller is responsible for complementing the final return value -+ * and inserting it into the byte stream. When checking, a final -+ * return value of CRC16_GOOD_VALUE indicates a valid CRC. -+ * -+ * Reference: Dallas Semiconductor Application Note 27 -+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", -+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., -+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt -+ * -+ ******************************************************************************/ -+ -+static uint16 crc16_table[256] = { -+ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF, -+ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7, -+ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E, -+ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876, -+ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD, -+ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5, -+ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C, -+ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974, -+ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB, -+ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3, -+ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A, -+ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72, -+ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9, -+ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1, -+ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738, -+ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70, -+ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7, -+ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF, -+ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036, -+ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E, -+ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5, -+ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD, -+ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134, -+ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C, -+ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3, -+ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB, -+ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232, -+ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A, -+ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1, -+ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9, -+ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330, -+ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78 -+}; -+ -+uint16 -+crc16( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint16 crc /* either CRC16_INIT_VALUE or previous return value */ -+) -+{ -+ while (nbytes-- > 0) -+ CRC_INNER_LOOP(16, crc, *pdata++); -+ return crc; -+} -+ -+static uint32 crc32_table[256] = { -+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, -+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, -+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, -+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, -+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, -+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, -+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, -+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, -+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, -+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, -+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, -+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, -+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, -+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, -+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, -+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, -+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, -+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, -+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, -+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, -+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, -+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, -+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, -+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, -+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, -+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, -+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, -+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, -+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, -+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, -+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, -+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, -+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, -+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, -+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, -+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, -+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, -+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, -+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, -+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, -+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, -+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, -+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, -+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, -+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, -+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, -+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, -+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, -+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, -+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, -+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, -+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, -+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, -+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, -+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, -+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, -+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, -+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, -+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, -+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, -+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, -+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, -+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, -+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -+}; -+ -+uint32 -+crc32( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint32 crc /* either CRC32_INIT_VALUE or previous return value */ -+) -+{ -+ uint8 *pend; -+#ifdef __mips__ -+ uint8 tmp[4]; -+ ulong *tptr = (ulong *)tmp; -+ -+ /* in case the beginning of the buffer isn't aligned */ -+ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc); -+ nbytes -= (pend - pdata); -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+ -+ /* handle bulk of data as 32-bit words */ -+ pend = pdata + (nbytes & 0xfffffffc); -+ while (pdata < pend) { -+ *tptr = *((ulong *)pdata)++; -+ CRC_INNER_LOOP(32, crc, tmp[0]); -+ CRC_INNER_LOOP(32, crc, tmp[1]); -+ CRC_INNER_LOOP(32, crc, tmp[2]); -+ CRC_INNER_LOOP(32, crc, tmp[3]); -+ } -+ -+ /* 1-3 bytes at end of buffer */ -+ pend = pdata + (nbytes & 0x03); -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+#else -+ pend = pdata + nbytes; -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+#endif -+ -+ return crc; -+} -+ +#ifdef notdef +#define CLEN 1499 +#define CBUFSIZ (CLEN+4) +#define CNBUFS 5 + -+void testcrc32(void) -+{ -+ uint j,k,l; -+ uint8 *buf; -+ uint len[CNBUFS]; -+ uint32 crcr; -+ uint32 crc32tv[CNBUFS] = -+ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110}; -+ -+ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL); -+ -+ /* step through all possible alignments */ -+ for (l=0;l<=4;l++) { -+ for (j=0; j ++#include ++#include ++#include ++#include ++#include ++#include ++ +#include +#include +#include +#include + -+struct dma_info; /* forward declaration */ -+#define di_t struct dma_info -+#include ++#define NVRAM_SIZE (0x1ff0) ++static char _nvdata[NVRAM_SIZE] __initdata; ++static char _valuestr[256] __initdata; + -+/* debug/trace */ -+#define DMA_ERROR(args) -+#define DMA_TRACE(args) -+ -+/* default dma message level(if input msg_level pointer is null in dma_attach()) */ -+static uint dma_msg_level = 0; -+ -+#define MAXNAMEL 8 -+#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t)) -+ -+/* dma engine software state */ -+typedef struct dma_info { -+ hnddma_t hnddma; /* exported structure */ -+ uint *msg_level; /* message level pointer */ -+ -+ char name[MAXNAMEL]; /* callers name for diag msgs */ -+ void *drv; /* driver handle */ -+ void *dev; /* device handle */ -+ dmaregs_t *regs; /* dma engine registers */ -+ -+ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */ -+ uint txin; /* index of next descriptor to reclaim */ -+ uint txout; /* index of next descriptor to post */ -+ uint txavail; /* # free tx descriptors */ -+ void *txp[MAXDD]; /* parallel array of pointers to packets */ -+ ulong txdpa; /* physical address of descriptor ring */ -+ uint txdalign; /* #bytes added to alloc'd mem to align txd */ -+ -+ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */ -+ uint rxin; /* index of next descriptor to reclaim */ -+ uint rxout; /* index of next descriptor to post */ -+ void *rxp[MAXDD]; /* parallel array of pointers to packets */ -+ ulong rxdpa; /* physical address of descriptor ring */ -+ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */ -+ -+ /* tunables */ -+ uint ntxd; /* # tx descriptors */ -+ uint nrxd; /* # rx descriptors */ -+ uint rxbufsize; /* rx buffer size in bytes */ -+ uint nrxpost; /* # rx buffers to keep posted */ -+ uint rxoffset; /* rxcontrol offset */ -+ uint ddoffset; /* add to get dma address of descriptor ring */ -+ uint dataoffset; /* add to get dma address of data buffer */ -+} dma_info_t; -+ -+/* descriptor bumping macros */ -+#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1)) -+#define PREVTXD(i) ((i - 1) & (di->ntxd - 1)) -+#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1)) -+#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1)) -+#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1)) -+ -+/* macros to convert between byte offsets and indexes */ -+#define B2I(bytes) ((bytes) / sizeof (dmadd_t)) -+#define I2B(index) ((index) * sizeof (dmadd_t)) -+ -+void* -+dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd, -+ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level) -+{ -+ dma_info_t *di; -+ void *va; ++/* ++ * TLV types. These codes are used in the "type-length-value" ++ * encoding of the items stored in the NVRAM device (flash or EEPROM) ++ * ++ * The layout of the flash/nvram is as follows: ++ * ++ * ++ * ++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. ++ * The "length" field marks the length of the data section, not ++ * including the type and length fields. ++ * ++ * Environment variables are stored as follows: ++ * ++ * = ++ * ++ * If bit 0 (low bit) is set, the length is an 8-bit value. ++ * If bit 0 (low bit) is clear, the length is a 16-bit value ++ * ++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still ++ * indicates the size of the length field. ++ * ++ * Flags are from the constants below: ++ * ++ */ ++#define ENV_LENGTH_16BITS 0x00 /* for low bit */ ++#define ENV_LENGTH_8BITS 0x01 + -+ ASSERT(ntxd <= MAXDD); -+ ASSERT(nrxd <= MAXDD); ++#define ENV_TYPE_USER 0x80 + -+ /* allocate private info structure */ -+ if ((di = MALLOC(sizeof (dma_info_t))) == NULL) -+ return (NULL); -+ bzero((char*)di, sizeof (dma_info_t)); -+ -+ /* set message level */ -+ di->msg_level = msg_level ? msg_level : &dma_msg_level; -+ -+ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset)); -+ -+ /* make a private copy of our callers name */ -+ strncpy(di->name, name, MAXNAMEL); -+ di->name[MAXNAMEL-1] = '\0'; -+ -+ di->drv = drv; -+ di->dev = dev; -+ di->regs = regs; -+ -+ /* allocate transmit descriptor ring */ -+ if (ntxd) { -+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL) -+ goto fail; -+ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); -+ di->txdalign = ((uint)di->txd - (uint)va); -+ di->txdpa = di->txdpa + di->txdalign; -+ ASSERT(ISALIGNED(di->txd, DMARINGALIGN)); -+ } -+ -+ /* allocate receive descriptor ring */ -+ if (nrxd) { -+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL) -+ goto fail; -+ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); -+ di->rxdalign = ((uint)di->rxd - (uint)va); -+ di->rxdpa = di->rxdpa + di->rxdalign; -+ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN)); -+ } -+ -+ /* save tunables */ -+ di->ntxd = ntxd; -+ di->nrxd = nrxd; -+ di->rxbufsize = rxbufsize; -+ di->nrxpost = nrxpost; -+ di->rxoffset = rxoffset; -+ di->ddoffset = ddoffset; -+ di->dataoffset = dataoffset; -+ -+ return ((void*)di); -+ -+fail: -+ dma_detach((void*)di); -+ return (NULL); -+} ++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) ++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) + -+/* may be called with core in reset */ -+void -+dma_detach(dma_info_t *di) -+{ -+ if (di == NULL) -+ return; ++/* ++ * The actual TLV types we support ++ */ + -+ DMA_TRACE(("%s: dma_detach\n", di->name)); ++#define ENV_TLV_TYPE_END 0x00 ++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) + -+ /* shouldn't be here if descriptors are unreclaimed */ -+ ASSERT(di->txin == di->txout); -+ ASSERT(di->rxin == di->rxout); ++/* ++ * Environment variable flags ++ */ + -+ /* free dma descriptor rings */ -+ if (di->txd) -+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa); -+ if (di->rxd) -+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa); ++#define ENV_FLG_NORMAL 0x00 /* normal read/write */ ++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ ++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ + -+ /* free our private info structure */ -+ MFREE((void*)di, sizeof (dma_info_t)); -+} ++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ ++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ + + -+void -+dma_txreset(dma_info_t *di) ++/* ********************************************************************* ++ * _nvram_read(buffer,offset,length) ++ * ++ * Read data from the NVRAM device ++ * ++ * Input parameters: ++ * buffer - destination buffer ++ * offset - offset of data to read ++ * length - number of bytes to read ++ * ++ * Return value: ++ * number of bytes read, or <0 if error occured ++ ********************************************************************* */ ++static int ++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) +{ -+ uint32 status; -+ -+ DMA_TRACE(("%s: dma_txreset\n", di->name)); ++ int i; ++ if (offset > NVRAM_SIZE) ++ return -1; + -+ /* suspend tx DMA first */ -+ W_REG(&di->regs->xmtcontrol, XC_SE); -+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED && -+ status != XS_XS_IDLE && -+ status != XS_XS_STOPPED, -+ 10000); -+ -+ W_REG(&di->regs->xmtcontrol, 0); -+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED, -+ 10000); -+ -+ if (status != XS_XS_DISABLED) { -+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); -+ } -+ -+ /* wait for the last transaction to complete */ -+ OSL_DELAY(300); ++ for ( i = 0; i < length; i++) { ++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; ++ } ++ return length; +} + -+void -+dma_rxreset(dma_info_t *di) -+{ -+ uint32 status; -+ -+ DMA_TRACE(("%s: dma_rxreset\n", di->name)); + -+ W_REG(&di->regs->rcvcontrol, 0); -+ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED, -+ 10000); -+ -+ if (status != RS_RS_DISABLED) { -+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); ++static char* ++_strnchr(const char *dest,int c,size_t cnt) ++{ ++ while (*dest && (cnt > 0)) { ++ if (*dest == c) return (char *) dest; ++ dest++; ++ cnt--; + } ++ return NULL; +} + -+void -+dma_txinit(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txinit\n", di->name)); + -+ di->txin = di->txout = 0; -+ di->txavail = di->ntxd - 1; + -+ /* clear tx descriptor ring */ -+ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t))); ++/* ++ * Core support API: Externally visible. ++ */ + -+ W_REG(&di->regs->xmtcontrol, XC_XE); -+ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset)); -+} ++/* ++ * Get the value of an NVRAM variable ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ + -+bool -+dma_txenabled(dma_info_t *di) ++char* ++cfe_env_get(unsigned char *nv_buf, char* name) +{ -+ uint32 xc; -+ -+ /* If the chip is dead, it is not enabled :-) */ -+ xc = R_REG(&di->regs->xmtcontrol); -+ return ((xc != 0xffffffff) && (xc & XC_XE)); -+} ++ int size; ++ unsigned char *buffer; ++ unsigned char *ptr; ++ unsigned char *envval; ++ unsigned int reclen; ++ unsigned int rectype; ++ int offset; ++ int flg; ++ ++ size = NVRAM_SIZE; ++ buffer = &_nvdata[0]; + -+void -+dma_txsuspend(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txsuspend\n", di->name)); -+ OR_REG(&di->regs->xmtcontrol, XC_SE); -+} ++ ptr = buffer; ++ offset = 0; + -+void -+dma_txresume(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txresume\n", di->name)); -+ AND_REG(&di->regs->xmtcontrol, ~XC_SE); -+} ++ /* Read the record type and length */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ ++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { + -+bool -+dma_txsuspended(dma_info_t *di) -+{ -+ uint32 xc; -+ uint32 xs; ++ /* Adjust pointer for TLV type */ ++ rectype = *(ptr); ++ offset++; ++ size--; + -+ xc = R_REG(&di->regs->xmtcontrol); -+ if (xc & XC_SE) { -+ xs = R_REG(&di->regs->xmtstatus); -+ return ((xs & XS_XS_MASK) == XS_XS_IDLE); ++ /* ++ * Read the length. It can be either 1 or 2 bytes ++ * depending on the code ++ */ ++ if (rectype & ENV_LENGTH_8BITS) { ++ /* Read the record type and length - 8 bits */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ reclen = *(ptr); ++ size--; ++ offset++; + } -+ return 0; -+} ++ else { ++ /* Read the record type and length - 16 bits, MSB first */ ++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { ++ goto error; ++ } ++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); ++ size -= 2; ++ offset += 2; ++ } ++ ++ if (reclen > size) ++ break; /* should not happen, bad NVRAM */ ++ ++ switch (rectype) { ++ case ENV_TLV_TYPE_ENV: ++ /* Read the TLV data */ ++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) ++ goto error; ++ flg = *ptr++; ++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); ++ if (envval) { ++ *envval++ = '\0'; ++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); ++ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; ++#if 0 ++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); ++#endif ++ if(!strcmp(ptr, name)){ ++ return _valuestr; ++ } ++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) ++ return _valuestr; ++ } ++ break; ++ ++ default: ++ /* Unknown TLV type, skip it. */ ++ break; ++ } + -+bool -+dma_txstopped(dma_info_t *di) -+{ -+ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED); -+} ++ /* ++ * Advance to next TLV ++ */ ++ ++ size -= (int)reclen; ++ offset += reclen; + -+bool -+dma_rxstopped(dma_info_t *di) -+{ -+ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED); -+} ++ /* Read the next record type */ ++ ptr = buffer; ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) ++ goto error; ++ } ++ ++error: ++ return NULL; + -+void -+dma_fifoloopbackenable(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name)); -+ OR_REG(&di->regs->xmtcontrol, XC_LE); +} + -+void -+dma_rxinit(dma_info_t *di) +diff -urN linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c +--- linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-12-15 17:11:05.818041750 +0100 +@@ -0,0 +1,102 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#define LINUX_OSL ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#ifdef mips ++#include ++#endif ++#include ++ ++#define PCI_CFG_RETRY 10 ++ ++#define OS_HANDLE_MAGIC 0x1234abcd ++#define BCM_MEM_FILENAME_LEN 24 ++ ++typedef struct bcm_mem_link { ++ struct bcm_mem_link *prev; ++ struct bcm_mem_link *next; ++ uint size; ++ int line; ++ char file[BCM_MEM_FILENAME_LEN]; ++} bcm_mem_link_t; ++ ++struct os_handle { ++ uint magic; ++ void *pdev; ++ uint malloced; ++ uint failed; ++ bcm_mem_link_t *dbgmem_list; ++}; ++ ++uint32 ++osl_pci_read_config(osl_t *osh, uint offset, uint size) +{ -+ DMA_TRACE(("%s: dma_rxinit\n", di->name)); ++ uint val; ++ uint retry=PCI_CFG_RETRY; + -+ di->rxin = di->rxout = 0; ++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ ++ /* only 4byte access supported */ ++ ASSERT(size == 4); ++ ++ do { ++ pci_read_config_dword(osh->pdev, offset, &val); ++ if (val != 0xffffffff) ++ break; ++ } while (retry--); + -+ /* clear rx descriptor ring */ -+ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t))); + -+ dma_rxenable(di); -+ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset)); ++ return (val); +} + +void -+dma_rxenable(dma_info_t *di) ++osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val) +{ -+ DMA_TRACE(("%s: dma_rxenable\n", di->name)); -+ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE)); ++ uint retry=PCI_CFG_RETRY; ++ ++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); ++ ++ /* only 4byte access supported */ ++ ASSERT(size == 4); ++ ++ do { ++ pci_write_config_dword(osh->pdev, offset, val); ++ if (offset!=PCI_BAR0_WIN) ++ break; ++ if (osl_pci_read_config(osh,offset,size) == val) ++ break; ++ } while (retry--); ++ +} + -+bool -+dma_rxenabled(dma_info_t *di) ++void ++osl_delay(uint usec) +{ -+ uint32 rc; ++ uint d; + -+ rc = R_REG(&di->regs->rcvcontrol); -+ return ((rc != 0xffffffff) && (rc & RC_RE)); ++ while (usec > 0) { ++ d = MIN(usec, 1000); ++ udelay(d); ++ usec -= d; ++ } +} + +diff -urN linux.old/arch/mips/bcm947xx/broadcom/nvram.c linux.dev/arch/mips/bcm947xx/broadcom/nvram.c +--- linux.old/arch/mips/bcm947xx/broadcom/nvram.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/nvram.c 2005-12-17 21:41:45.656819500 +0100 +@@ -0,0 +1,165 @@ +/* -+ * The BCM47XX family supports full 32bit dma engine buffer addressing so -+ * dma buffers can cross 4 Kbyte page boundaries. ++ * NVRAM variable manipulation (Linux kernel half) ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ -+int -+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags) -+{ -+ void *p, *next; -+ uchar *data; -+ uint len; -+ uint txout; -+ uint32 ctrl; -+ uint32 pa; + -+ DMA_TRACE(("%s: dma_txfast\n", di->name)); ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ txout = di->txout; -+ ctrl = 0; ++/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ ++static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); + -+ /* -+ * Walk the chain of packet buffers -+ * allocating and initializing transmit descriptor entries. -+ */ -+ for (p = p0; p; p = next) { -+ data = PKTDATA(di->drv, p); -+ len = PKTLEN(di->drv, p); -+ next = PKTNEXT(di->drv, p); ++/* Global SB handle */ ++extern void *sbh; ++extern spinlock_t bcm947xx_sbh_lock; ++static int cfe_env; + -+ /* return nonzero if out of tx descriptors */ -+ if (NEXTTXD(txout) == di->txin) -+ goto outoftxd; ++extern char *cfe_env_get(unsigned char *nv_buf, char *name); ++ + -+ if (len == 0) -+ continue; ++/* Convenience */ ++#define sbh_lock bcm947xx_sbh_lock ++#define KB * 1024 ++#define MB * 1024 * 1024 + -+ /* get physical address of buffer start */ -+ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p); ++/* Probe for NVRAM header */ ++static void __init ++early_nvram_init(void) ++{ ++ struct nvram_header *header; ++ chipcregs_t *cc; ++ struct sflash *info = NULL; ++ int i; ++ uint32 base, off, lim; ++ u32 *src, *dst; ++ ++ cfe_env = 0; ++ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ base = KSEG1ADDR(SB_FLASH2); ++ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { ++ case PFLASH: ++ lim = SB_FLASH2_SZ; ++ break; + -+ /* build the descriptor control value */ -+ ctrl = len & CTRL_BC_MASK; ++ case SFLASH_ST: ++ case SFLASH_AT: ++ if ((info = sflash_init(cc)) == NULL) ++ return; ++ lim = info->size; ++ break; + -+ ctrl |= coreflags; -+ -+ if (p == p0) -+ ctrl |= CTRL_SOF; -+ if (next == NULL) -+ ctrl |= (CTRL_IOC | CTRL_EOF); -+ if (txout == (di->ntxd - 1)) -+ ctrl |= CTRL_EOT; ++ case FLASH_NONE: ++ default: ++ return; ++ } ++ } else { ++ /* extif assumed, Stop at 4 MB */ ++ base = KSEG1ADDR(SB_FLASH1); ++ lim = SB_FLASH1_SZ; ++ } + -+ /* init the tx descriptor */ -+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); -+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ ++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); ++ dst = (u32 *) nvram_buf; ++ if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) { ++ printk("early_nvram_init: WGT634U NVRAM found.\n"); + -+ ASSERT(di->txp[txout] == NULL); ++ for (i = 0; i < 0x1ff0; i++) { ++ if (*src == 0xFFFFFFFF) ++ break; ++ *dst++ = *src++; ++ } ++ cfe_env = 1; ++ return; ++ } + -+ txout = NEXTTXD(txout); ++ off = FLASH_MIN; ++ while (off <= lim) { ++ /* Windowed flash access */ ++ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ off <<= 1; + } + -+ /* if last txd eof not set, fix it */ -+ if (!(ctrl & CTRL_EOF)) -+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); ++ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ ++ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ return; + -+ /* save the packet */ -+ di->txp[PREVTXD(txout)] = p0; ++found: ++ src = (u32 *) header; ++ dst = (u32 *) nvram_buf; ++ for (i = 0; i < sizeof(struct nvram_header); i += 4) ++ *dst++ = *src++; ++ for (; i < header->len && i < NVRAM_SPACE; i += 4) ++ *dst++ = ltoh32(*src++); ++} + -+ /* bump the tx descriptor index */ -+ di->txout = txout; ++/* Early (before mm or mtd) read-only access to NVRAM */ ++char * __init nvram_get(const char *name) ++{ ++ char *var, *value, *end, *eq; + -+ /* kick the chip */ -+ W_REG(&di->regs->xmtptr, I2B(txout)); ++ if (!name) ++ return NULL; + -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ /* Too early? */ ++ if (sbh == NULL) ++ return NULL; + -+ return (0); ++ if (!nvram_buf[0]) ++ early_nvram_init(); + -+outoftxd: -+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); -+ PKTFREE(di->drv, p0, TRUE); -+ di->txavail = 0; -+ di->hnddma.txnobuf++; -+ return (-1); -+} ++ if (cfe_env) ++ return cfe_env_get(nvram_buf, name); + -+#define PAGESZ 4096 -+#define PAGEBASE(x) ((uint)(x) & ~4095) ++ /* Look for name=value and return value */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var = value + strlen(value) + 1) { ++ if (!(eq = strchr(var, '='))) ++ break; ++ value = eq + 1; ++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) ++ return value; ++ } + ++ return NULL; ++} +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbmips.c linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c +--- linux.old/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c 2005-12-15 16:46:31.122961250 +0100 +@@ -0,0 +1,1038 @@ +/* -+ * Just like above except go through the extra effort of splitting -+ * buffers that cross 4Kbyte boundaries into multiple tx descriptors. ++ * BCM47XX Sonics SiliconBackplane MIPS core routines ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ -+int -+dma_tx(dma_info_t *di, void *p0, uint32 coreflags) -+{ -+ void *p, *next; -+ uchar *data; -+ uint plen, len; -+ uchar *page, *start, *end; -+ uint txout; -+ uint32 ctrl; -+ uint32 pa; -+ -+ DMA_TRACE(("%s: dma_tx\n", di->name)); -+ -+ txout = di->txout; -+ ctrl = 0; -+ -+ /* -+ * Walk the chain of packet buffers -+ * splitting those that cross 4 Kbyte boundaries -+ * allocating and initializing transmit descriptor entries. -+ */ -+ for (p = p0; p; p = next) { -+ data = PKTDATA(di->drv, p); -+ plen = PKTLEN(di->drv, p); -+ next = PKTNEXT(di->drv, p); -+ -+ if (plen == 0) -+ continue; + -+ for (page = (uchar*)PAGEBASE(data); -+ page <= (uchar*)PAGEBASE(data + plen - 1); -+ page += PAGESZ) { ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ /* return nonzero if out of tx descriptors */ -+ if (NEXTTXD(txout) == di->txin) -+ goto outoftxd; ++/* ++ * Returns TRUE if an external UART exists at the given base ++ * register. ++ */ ++static bool ++BCMINITFN(serial_exists)(uint8 *regs) ++{ ++ uint8 save_mcr, status1; + -+ start = (page == (uchar*)PAGEBASE(data))? data: page; -+ end = (page == (uchar*)PAGEBASE(data + plen))? -+ (data + plen): (page + PAGESZ); -+ len = end - start; ++ save_mcr = R_REG(®s[UART_MCR]); ++ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); ++ status1 = R_REG(®s[UART_MSR]) & 0xf0; ++ W_REG(®s[UART_MCR], save_mcr); + -+ /* build the descriptor control value */ -+ ctrl = len & CTRL_BC_MASK; ++ return (status1 == 0x90); ++} + -+ ctrl |= coreflags; ++/* ++ * Initializes UART access. The callback function will be called once ++ * per found UART. ++ */ ++void ++BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) ++{ ++ void *regs; ++ ulong base; ++ uint irq; ++ int i, n; + -+ if ((p == p0) && (start == data)) -+ ctrl |= CTRL_SOF; -+ if ((next == NULL) && (end == (data + plen))) -+ ctrl |= (CTRL_IOC | CTRL_EOF); -+ if (txout == (di->ntxd - 1)) -+ ctrl |= CTRL_EOT; ++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { ++ extifregs_t *eir = (extifregs_t *) regs; ++ sbconfig_t *sb; + -+ /* get physical address of buffer start */ -+ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p); ++ /* Determine external UART register base */ ++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); ++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); + -+ /* init the tx descriptor */ -+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); -+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); + -+ ASSERT(di->txp[txout] == NULL); ++ /* Disable GPIO interrupt initially */ ++ W_REG(&eir->gpiointpolarity, 0); ++ W_REG(&eir->gpiointmask, 0); + -+ txout = NEXTTXD(txout); ++ /* Search for external UARTs */ ++ n = 2; ++ for (i = 0; i < 2; i++) { ++ regs = (void *) REG_MAP(base + (i * 8), 8); ++ if (BCMINIT(serial_exists)(regs)) { ++ /* Set GPIO 1 to be the external UART IRQ */ ++ W_REG(&eir->gpiointmask, 2); ++ if (add) ++ add(regs, irq, 13500000, 0); ++ } + } -+ } + -+ /* if last txd eof not set, fix it */ -+ if (!(ctrl & CTRL_EOF)) -+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); ++ /* Add internal UART if enabled */ ++ if (R_REG(&eir->corecontrol) & CC_UE) ++ if (add) ++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); ++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 rev, cap, pll, baud_base, div; + -+ /* save the packet */ -+ di->txp[PREVTXD(txout)] = p0; ++ /* Determine core revision and capabilities */ ++ rev = sb_corerev(sbh); ++ cap = R_REG(&cc->capabilities); ++ pll = cap & CAP_PLL_MASK; + -+ /* bump the tx descriptor index */ -+ di->txout = txout; ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); + -+ /* kick the chip */ -+ W_REG(&di->regs->xmtptr, I2B(txout)); ++ if (pll == PLL_TYPE1) { ++ /* PLL clock */ ++ baud_base = sb_clock_rate(pll, ++ R_REG(&cc->clockcontrol_n), ++ R_REG(&cc->clockcontrol_m2)); ++ div = 1; ++ } else { ++ if (rev >= 11) { ++ /* Fixed ALP clock */ ++ baud_base = 20000000; ++ div = 1; ++ /* Set the override bit so we don't divide it */ ++ W_REG(&cc->corecontrol, CC_UARTCLKO); ++ } else if (rev >= 3) { ++ /* Internal backplane clock */ ++ baud_base = sb_clock(sbh); ++ div = 2; /* Minimum divisor */ ++ W_REG(&cc->clkdiv, ++ ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div)); ++ } else { ++ /* Fixed internal backplane clock */ ++ baud_base = 88000000; ++ div = 48; ++ } + -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ /* Clock source depends on strapping if UartClkOverride is unset */ ++ if ((rev > 0) && ++ ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { ++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { ++ /* Internal divided backplane clock */ ++ baud_base /= div; ++ } else { ++ /* Assume external clock of 1.8432 MHz */ ++ baud_base = 1843200; ++ } ++ } ++ } + -+ return (0); ++ /* Add internal UARTs */ ++ n = cap & CAP_UARTS_MASK; ++ for (i = 0; i < n; i++) { ++ /* Register offset changed after revision 0 */ ++ if (rev) ++ regs = (void *)((ulong) &cc->uart0data + (i * 256)); ++ else ++ regs = (void *)((ulong) &cc->uart0data + (i * 8)); + -+outoftxd: -+ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name)); -+ PKTFREE(di->drv, p0, TRUE); -+ di->txavail = 0; -+ di->hnddma.txnobuf++; -+ return (-1); ++ if (add) ++ add(regs, irq, baud_base, 0); ++ } ++ } +} + -+/* returns a pointer to the next frame received, or NULL if there are no more */ -+void* -+dma_rx(dma_info_t *di) ++/* ++ * Initialize jtag master and return handle for ++ * jtag_rwreg. Returns NULL on failure. ++ */ ++void * ++sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap) +{ -+ void *p; -+ uint len; -+ int skiplen = 0; -+ -+ while ((p = dma_getnextrxp(di, FALSE))) { -+ /* skip giant packets which span multiple rx descriptors */ -+ if (skiplen > 0) { -+ skiplen -= di->rxbufsize; -+ if (skiplen < 0) -+ skiplen = 0; -+ PKTFREE(di->drv, p, FALSE); -+ continue; -+ } ++ void *regs; + -+ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p))); -+ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len)); ++ if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 tmp; + -+ /* bad frame length check */ -+ if (len > (di->rxbufsize - di->rxoffset)) { -+ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len)); -+ if (len > 0) -+ skiplen = len - (di->rxbufsize - di->rxoffset); -+ PKTFREE(di->drv, p, FALSE); -+ di->hnddma.rxgiants++; -+ continue; ++ /* ++ * Determine jtagm availability from ++ * core revision and capabilities. ++ */ ++ tmp = sb_corerev(sbh); ++ /* ++ * Corerev 10 has jtagm, but the only chip ++ * with it does not have a mips, and ++ * the layout of the jtagcmd register is ++ * different. We'll only accept >= 11. ++ */ ++ if (tmp < 11) ++ return (NULL); ++ ++ tmp = R_REG(&cc->capabilities); ++ if ((tmp & CAP_JTAGP) == 0) ++ return (NULL); ++ ++ /* Set clock divider if requested */ ++ if (clkd != 0) { ++ tmp = R_REG(&cc->clkdiv); ++ tmp = (tmp & ~CLKD_JTAG) | ++ ((clkd << CLKD_JTAG_SHIFT) & CLKD_JTAG); ++ W_REG(&cc->clkdiv, tmp); + } + -+ /* set actual length */ -+ PKTSETLEN(di->drv, p, (di->rxoffset + len)); -+ -+ break; ++ /* Enable jtagm */ ++ tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0); ++ W_REG(&cc->jtagctrl, tmp); + } + -+ return (p); ++ return (regs); +} + -+/* post receive buffers */ +void -+dma_rxfill(dma_info_t *di) ++sb_jtagm_disable(void *h) +{ -+ void *p; -+ uint rxin, rxout; -+ uint ctrl; -+ uint n; -+ uint i; -+ uint32 pa; -+ uint rxbufsize; ++ chipcregs_t *cc = (chipcregs_t *)h; + -+ /* -+ * Determine how many receive buffers we're lacking -+ * from the full complement, allocate, initialize, -+ * and post them, then update the chip rx lastdscr. -+ */ -+ -+ rxin = di->rxin; -+ rxout = di->rxout; -+ rxbufsize = di->rxbufsize; -+ -+ n = di->nrxpost - NRXDACTIVE(rxin, rxout); -+ -+ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n)); -+ -+ for (i = 0; i < n; i++) { -+ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) { -+ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name)); -+ di->hnddma.rxnobuf++; -+ break; -+ } -+ -+ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0; -+ -+ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p); -+ ASSERT(ISALIGNED(pa, 4)); -+ -+ /* save the free packet pointer */ -+ ASSERT(di->rxp[rxout] == NULL); -+ di->rxp[rxout] = p; -+ -+ /* prep the descriptor control value */ -+ ctrl = rxbufsize; -+ if (rxout == (di->nrxd - 1)) -+ ctrl |= CTRL_EOT; -+ -+ /* init the rx descriptor */ -+ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl)); -+ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset)); -+ -+ rxout = NEXTRXD(rxout); -+ } -+ -+ di->rxout = rxout; -+ -+ /* update the chip lastdscr pointer */ -+ W_REG(&di->regs->rcvptr, I2B(rxout)); -+} -+ -+void -+dma_txreclaim(dma_info_t *di, bool forceall) -+{ -+ void *p; -+ -+ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : "")); -+ -+ while ((p = dma_getnexttxp(di, forceall))) -+ PKTFREE(di->drv, p, TRUE); -+} -+ -+/* -+ * Reclaim next completed txd (txds if using chained buffers) and -+ * return associated packet. -+ * If 'force' is true, reclaim txd(s) and return associated packet -+ * regardless of the value of the hardware "curr" pointer. -+ */ -+void* -+dma_getnexttxp(dma_info_t *di, bool forceall) -+{ -+ uint start, end, i; -+ void *txp; -+ -+ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); -+ -+ txp = NULL; -+ -+ start = di->txin; -+ if (forceall) -+ end = di->txout; -+ else -+ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); -+ -+ if ((start == 0) && (end > di->txout)) -+ goto bogus; -+ -+ for (i = start; i != end && !txp; i = NEXTTXD(i)) { -+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset), -+ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]); -+ W_SM(&di->txd[i].addr, 0xdeadbeef); -+ txp = di->txp[i]; -+ di->txp[i] = NULL; -+ } -+ -+ di->txin = i; -+ -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+ -+ return (txp); -+ -+bogus: -+/* -+ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", -+ start, end, di->txout, forceall)); -+*/ -+ return (NULL); -+} -+ -+void -+dma_rxreclaim(dma_info_t *di) -+{ -+ void *p; -+ -+ DMA_TRACE(("%s: dma_rxreclaim\n", di->name)); -+ -+ while ((p = dma_getnextrxp(di, TRUE))) -+ PKTFREE(di->drv, p, FALSE); -+} -+ -+void * -+dma_getnextrxp(dma_info_t *di, bool forceall) -+{ -+ uint i; -+ void *rxp; -+ -+ /* if forcing, dma engine must be disabled */ -+ ASSERT(!forceall || !dma_rxenabled(di)); -+ -+ i = di->rxin; -+ -+ /* return if no packets posted */ -+ if (i == di->rxout) -+ return (NULL); -+ -+ /* ignore curr if forceall */ -+ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK))) -+ return (NULL); -+ -+ /* get the packet pointer that corresponds to the rx descriptor */ -+ rxp = di->rxp[i]; -+ ASSERT(rxp); -+ di->rxp[i] = NULL; -+ -+ /* clear this packet from the descriptor ring */ -+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset), -+ di->rxbufsize, DMA_RX, rxp); -+ W_SM(&di->rxd[i].addr, 0xdeadbeef); -+ -+ di->rxin = NEXTRXD(i); -+ -+ return (rxp); -+} -+ -+char* -+dma_dumptx(dma_info_t *di, char *buf) -+{ -+ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n", -+ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail); -+ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n", -+ R_REG(&di->regs->xmtcontrol), -+ R_REG(&di->regs->xmtaddr), -+ R_REG(&di->regs->xmtptr), -+ R_REG(&di->regs->xmtstatus)); -+ return (buf); -+} -+ -+char* -+dma_dumprx(dma_info_t *di, char *buf) -+{ -+ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n", -+ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout); -+ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n", -+ R_REG(&di->regs->rcvcontrol), -+ R_REG(&di->regs->rcvaddr), -+ R_REG(&di->regs->rcvptr), -+ R_REG(&di->regs->rcvstatus)); -+ return (buf); -+} -+ -+char* -+dma_dump(dma_info_t *di, char *buf) -+{ -+ buf = dma_dumptx(di, buf); -+ buf = dma_dumprx(di, buf); -+ return (buf); -+} -+ -+uint -+dma_getvar(dma_info_t *di, char *name) -+{ -+ if (!strcmp(name, "&txavail")) -+ return ((uint) &di->txavail); -+ else { -+ ASSERT(0); -+ } -+ return (0); -+} -+ -+void -+dma_txblock(dma_info_t *di) -+{ -+ di->txavail = 0; -+} -+ -+void -+dma_txunblock(dma_info_t *di) -+{ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+} -+ -+uint -+dma_txactive(dma_info_t *di) -+{ -+ return (NTXDACTIVE(di->txin, di->txout)); -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200 -@@ -0,0 +1,420 @@ -+/* -+ * Linux OS Independent Layer -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $ -+ */ -+ -+#define LINUX_OSL -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#ifdef mips -+#include -+#endif -+#include -+ -+#define PCI_CFG_RETRY 10 -+ -+void* -+osl_pktget(void *drv, uint len, bool send) -+{ -+ struct sk_buff *skb; -+ -+ if ((skb = dev_alloc_skb(len)) == NULL) -+ return (NULL); -+ -+ skb_put(skb, len); -+ -+ /* ensure the cookie field is cleared */ -+ PKTSETCOOKIE(skb, NULL); -+ -+ return ((void*) skb); -+} -+ -+void -+osl_pktfree(void *p) -+{ -+ struct sk_buff *skb, *nskb; -+ -+ skb = (struct sk_buff*) p; -+ -+ /* perversion: we use skb->next to chain multi-skb packets */ -+ while (skb) { -+ nskb = skb->next; -+ skb->next = NULL; -+ if (skb->destructor) { -+ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */ -+ dev_kfree_skb_any(skb); -+ } else { -+ /* can free immediately (even in_irq()) if destructor does not exist */ -+ dev_kfree_skb(skb); -+ } -+ skb = nskb; -+ } -+} -+ -+uint32 -+osl_pci_read_config(void *loc, uint offset, uint size) -+{ -+ struct pci_dev *pdev; -+ uint val; -+ uint retry=PCI_CFG_RETRY; -+ -+ /* only 4byte access supported */ -+ ASSERT(size == 4); -+ -+ pdev = (struct pci_dev*)loc; -+ do { -+ pci_read_config_dword(pdev, offset, &val); -+ if (val != 0xffffffff) -+ break; -+ } while (retry--); -+ -+ -+ return (val); -+} -+ -+void -+osl_pci_write_config(void *loc, uint offset, uint size, uint val) -+{ -+ struct pci_dev *pdev; -+ uint retry=PCI_CFG_RETRY; -+ -+ /* only 4byte access supported */ -+ ASSERT(size == 4); -+ -+ pdev = (struct pci_dev*)loc; -+ -+ do { -+ pci_write_config_dword(pdev, offset, val); -+ if (offset!=PCI_BAR0_WIN) -+ break; -+ if (osl_pci_read_config(loc,offset,size) == val) -+ break; -+ } while (retry--); -+ -+} -+ -+void -+osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size) -+{ -+ ASSERT(0); -+} -+ -+void -+osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size) -+{ -+ ASSERT(0); -+} -+ -+void -+osl_assert(char *exp, char *file, int line) -+{ -+ char tempbuf[255]; -+ -+ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line); -+ panic(tempbuf); -+} -+ -+/* -+ * BINOSL selects the slightly slower function-call-based binary compatible osl. -+ */ -+#ifdef BINOSL -+ -+int -+osl_printf(const char *format, ...) -+{ -+ va_list args; -+ char buf[1024]; -+ int len; -+ -+ /* sprintf into a local buffer because there *is* no "vprintk()".. */ -+ va_start(args, format); -+ len = vsprintf(buf, format, args); -+ va_end(args); -+ -+ if (len > sizeof (buf)) { -+ printk("osl_printf: buffer overrun\n"); -+ return (0); -+ } -+ -+ return (printk(buf)); -+} -+ -+int -+osl_sprintf(char *buf, const char *format, ...) -+{ -+ va_list args; -+ int rc; -+ -+ va_start(args, format); -+ rc = vsprintf(buf, format, args); -+ va_end(args); -+ return (rc); -+} -+ -+int -+osl_strcmp(const char *s1, const char *s2) -+{ -+ return (strcmp(s1, s2)); -+} -+ -+int -+osl_strncmp(const char *s1, const char *s2, uint n) -+{ -+ return (strncmp(s1, s2, n)); -+} -+ -+int -+osl_strlen(char *s) -+{ -+ return (strlen(s)); -+} -+ -+char* -+osl_strcpy(char *d, const char *s) -+{ -+ return (strcpy(d, s)); -+} -+ -+char* -+osl_strncpy(char *d, const char *s, uint n) -+{ -+ return (strncpy(d, s, n)); -+} -+ -+void -+bcopy(const void *src, void *dst, int len) -+{ -+ memcpy(dst, src, len); -+} -+ -+int -+bcmp(const void *b1, const void *b2, int len) -+{ -+ return (memcmp(b1, b2, len)); -+} -+ -+void -+bzero(void *b, int len) -+{ -+ memset(b, '\0', len); -+} -+ -+void* -+osl_malloc(uint size) -+{ -+ return (kmalloc(size, GFP_ATOMIC)); -+} -+ -+void -+osl_mfree(void *addr, uint size) -+{ -+ kfree(addr); -+} -+ -+uint32 -+osl_readl(volatile uint32 *r) -+{ -+ return (readl(r)); -+} -+ -+uint16 -+osl_readw(volatile uint16 *r) -+{ -+ return (readw(r)); -+} -+ -+uint8 -+osl_readb(volatile uint8 *r) -+{ -+ return (readb(r)); -+} -+ -+void -+osl_writel(uint32 v, volatile uint32 *r) -+{ -+ writel(v, r); -+} -+ -+void -+osl_writew(uint16 v, volatile uint16 *r) -+{ -+ writew(v, r); -+} -+ -+void -+osl_writeb(uint8 v, volatile uint8 *r) -+{ -+ writeb(v, r); -+} -+ -+void * -+osl_uncached(void *va) -+{ -+#ifdef mips -+ return ((void*)KSEG1ADDR(va)); -+#else -+ return ((void*)va); -+#endif -+} -+ -+uint -+osl_getcycles(void) -+{ -+ uint cycles; -+ -+#if defined(mips) -+ cycles = read_c0_count() * 2; -+#elif defined(__i386__) -+ rdtscl(cycles); -+#else -+ cycles = 0; -+#endif -+ return cycles; -+} -+ -+void * -+osl_reg_map(uint32 pa, uint size) -+{ -+ return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); -+} -+ -+void -+osl_reg_unmap(void *va) -+{ -+ iounmap(va); -+} -+ -+int -+osl_busprobe(uint32 *val, uint32 addr) -+{ -+#ifdef mips -+ return get_dbe(*val, (uint32*)addr); -+#else -+ *val = readl(addr); -+ return 0; -+#endif -+} -+ -+void* -+osl_dma_alloc_consistent(void *dev, uint size, ulong *pap) -+{ -+ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap)); -+} -+ -+void -+osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa) -+{ -+ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa); -+} -+ -+uint -+osl_dma_map(void *dev, void *va, uint size, int direction) -+{ -+ int dir; -+ -+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; -+ return (pci_map_single(dev, va, size, dir)); -+} -+ -+void -+osl_dma_unmap(void *dev, uint pa, uint size, int direction) -+{ -+ int dir; -+ -+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; -+ pci_unmap_single(dev, (uint32)pa, size, dir); -+} -+ -+void -+osl_delay(uint usec) -+{ -+ udelay(usec); -+} -+ -+uchar* -+osl_pktdata(void *drv, void *skb) -+{ -+ return (((struct sk_buff*)skb)->data); -+} -+ -+uint -+osl_pktlen(void *drv, void *skb) -+{ -+ return (((struct sk_buff*)skb)->len); -+} -+ -+void* -+osl_pktnext(void *drv, void *skb) -+{ -+ return (((struct sk_buff*)skb)->next); -+} -+ -+void -+osl_pktsetnext(void *skb, void *x) -+{ -+ ((struct sk_buff*)skb)->next = (struct sk_buff*)x; -+} -+ -+void -+osl_pktsetlen(void *drv, void *skb, uint len) -+{ -+ __skb_trim((struct sk_buff*)skb, len); -+} -+ -+uchar* -+osl_pktpush(void *drv, void *skb, int bytes) -+{ -+ return (skb_push((struct sk_buff*)skb, bytes)); -+} -+ -+uchar* -+osl_pktpull(void *drv, void *skb, int bytes) -+{ -+ return (skb_pull((struct sk_buff*)skb, bytes)); -+} -+ -+void* -+osl_pktdup(void *drv, void *skb) -+{ -+ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC)); -+} -+ -+void* -+osl_pktcookie(void *skb) -+{ -+ return ((void*)((struct sk_buff*)skb)->csum); -+} -+ -+void -+osl_pktsetcookie(void *skb, void *x) -+{ -+ ((struct sk_buff*)skb)->csum = (uint)x; -+} -+ -+void* -+osl_pktlink(void *skb) -+{ -+ return (((struct sk_buff*)skb)->prev); -+} -+ -+void -+osl_pktsetlink(void *skb, void *x) -+{ -+ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x; -+} -+ -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200 -@@ -0,0 +1,950 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane MIPS core routines -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * Memory segments (32bit kernel mode addresses) -+ */ -+#undef KUSEG -+#undef KSEG0 -+#undef KSEG1 -+#undef KSEG2 -+#undef KSEG3 -+#define KUSEG 0x00000000 -+#define KSEG0 0x80000000 -+#define KSEG1 0xa0000000 -+#define KSEG2 0xc0000000 -+#define KSEG3 0xe0000000 -+ -+/* -+ * Map an address to a certain kernel segment -+ */ -+#undef KSEG0ADDR -+#undef KSEG1ADDR -+#undef KSEG2ADDR -+#undef KSEG3ADDR -+#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) -+#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) -+#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) -+#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) -+ -+/* -+ * The following macros are especially useful for __asm__ -+ * inline assembler. -+ */ -+#ifndef __STR -+#define __STR(x) #x -+#endif -+#ifndef STR -+#define STR(x) __STR(x) -+#endif -+ -+/* ********************************************************************* -+ * CP0 Registers -+ ********************************************************************* */ -+ -+#define C0_INX 0 /* CP0: TLB Index */ -+#define C0_RAND 1 /* CP0: TLB Random */ -+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ -+#define C0_CTEXT 4 /* CP0: Context */ -+#define C0_PGMASK 5 /* CP0: TLB PageMask */ -+#define C0_WIRED 6 /* CP0: TLB Wired */ -+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ -+#define C0_COUNT 9 /* CP0: Count */ -+#define C0_TLBHI 10 /* CP0: TLB EntryHi */ -+#define C0_COMPARE 11 /* CP0: Compare */ -+#define C0_SR 12 /* CP0: Processor Status */ -+#define C0_STATUS C0_SR /* CP0: Processor Status */ -+#define C0_CAUSE 13 /* CP0: Exception Cause */ -+#define C0_EPC 14 /* CP0: Exception PC */ -+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ -+#define C0_CONFIG 16 /* CP0: Config */ -+#define C0_LLADDR 17 /* CP0: LLAddr */ -+#define C0_WATCHLO 18 /* CP0: WatchpointLo */ -+#define C0_WATCHHI 19 /* CP0: WatchpointHi */ -+#define C0_XCTEXT 20 /* CP0: XContext */ -+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ -+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ -+#define C0_ECC 26 /* CP0: ECC */ -+#define C0_CACHEERR 27 /* CP0: CacheErr */ -+#define C0_TAGLO 28 /* CP0: TagLo */ -+#define C0_TAGHI 29 /* CP0: TagHi */ -+#define C0_ERREPC 30 /* CP0: ErrorEPC */ -+ -+/* -+ * Macros to access the system control coprocessor -+ */ -+ -+#define MFC0(source, sel) \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ -+ "move\t%0,$1\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ :"=r" (__res) \ -+ : \ -+ :"$1"); \ -+ __res; \ -+}) -+ -+#define MTC0(source, sel, value) \ -+do { \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ "move\t$1,%z0\n\t" \ -+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ : \ -+ :"Jr" (value) \ -+ :"$1"); \ -+} while (0) -+ -+/* -+ * R4x00 interrupt enable / cause bits -+ */ -+#undef IE_SW0 -+#undef IE_SW1 -+#undef IE_IRQ0 -+#undef IE_IRQ1 -+#undef IE_IRQ2 -+#undef IE_IRQ3 -+#undef IE_IRQ4 -+#undef IE_IRQ5 -+#define IE_SW0 (1<< 8) -+#define IE_SW1 (1<< 9) -+#define IE_IRQ0 (1<<10) -+#define IE_IRQ1 (1<<11) -+#define IE_IRQ2 (1<<12) -+#define IE_IRQ3 (1<<13) -+#define IE_IRQ4 (1<<14) -+#define IE_IRQ5 (1<<15) -+ -+/* -+ * Bitfields in the R4xx0 cp0 status register -+ */ -+#define ST0_IE 0x00000001 -+#define ST0_EXL 0x00000002 -+#define ST0_ERL 0x00000004 -+#define ST0_KSU 0x00000018 -+# define KSU_USER 0x00000010 -+# define KSU_SUPERVISOR 0x00000008 -+# define KSU_KERNEL 0x00000000 -+#define ST0_UX 0x00000020 -+#define ST0_SX 0x00000040 -+#define ST0_KX 0x00000080 -+#define ST0_DE 0x00010000 -+#define ST0_CE 0x00020000 -+ -+/* -+ * Status register bits available in all MIPS CPUs. -+ */ -+#define ST0_IM 0x0000ff00 -+#define ST0_CH 0x00040000 -+#define ST0_SR 0x00100000 -+#define ST0_TS 0x00200000 -+#define ST0_BEV 0x00400000 -+#define ST0_RE 0x02000000 -+#define ST0_FR 0x04000000 -+#define ST0_CU 0xf0000000 -+#define ST0_CU0 0x10000000 -+#define ST0_CU1 0x20000000 -+#define ST0_CU2 0x40000000 -+#define ST0_CU3 0x80000000 -+#define ST0_XX 0x80000000 /* MIPS IV naming */ ++ W_REG(&cc->jtagctrl, R_REG(&cc->jtagctrl) & ~JCTRL_EN); ++} + +/* -+ * Cache Operations -+ */ -+ -+#ifndef Fill_I -+#define Fill_I 0x14 -+#endif -+ -+#define cache_unroll(base,op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, (%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); -+ -+/* -+ * These are the UART port assignments, expressed as offsets from the base -+ * register. These assignments should hold for any serial port based on -+ * a 8250, 16450, or 16550(A). -+ */ -+ -+#define UART_MCR 4 /* Out: Modem Control Register */ -+#define UART_MSR 6 /* In: Modem Status Register */ -+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -+ -+/* -+ * Returns TRUE if an external UART exists at the given base -+ * register. ++ * Read/write a jtag register. Assumes a target with ++ * 8 bit IR and 32 bit DR. + */ -+static bool -+serial_exists(uint8 *regs) -+{ -+ uint8 save_mcr, status1; -+ -+ save_mcr = R_REG(®s[UART_MCR]); -+ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); -+ status1 = R_REG(®s[UART_MSR]) & 0xf0; -+ W_REG(®s[UART_MCR], save_mcr); -+ -+ return (status1 == 0x90); -+} -+ -+/* -+ * Initializes UART access. The callback function will be called once -+ * per found UART. -+*/ -+void -+sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) ++#define IRWIDTH 8 ++#define DRWIDTH 32 ++uint32 ++jtag_rwreg(void *h, uint32 ir, uint32 dr) +{ -+ void *regs; -+ ulong base; -+ uint irq; -+ int i, n; -+ -+ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { -+ extifregs_t *eir = (extifregs_t *) regs; -+ sbconfig_t *sb; ++ chipcregs_t *cc = (chipcregs_t *) h; ++ uint32 tmp; + -+ /* Determine external UART register base */ -+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); -+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); -+ -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); -+ -+ /* Disable GPIO interrupt initially */ -+ W_REG(&eir->gpiointpolarity, 0); -+ W_REG(&eir->gpiointmask, 0); -+ -+ /* Search for external UARTs */ -+ n = 2; -+ for (i = 0; i < 2; i++) { -+ regs = (void *) REG_MAP(base + (i * 8), 8); -+ if (serial_exists(regs)) { -+ /* Set GPIO 1 to be the external UART IRQ */ -+ W_REG(&eir->gpiointmask, 2); -+ if (add) -+ add(regs, irq, 13500000, 0); -+ } -+ } -+ -+ /* Add internal UART if enabled */ -+ if (R_REG(&eir->corecontrol) & CC_UE) -+ if (add) -+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); -+ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { -+ chipcregs_t *cc = (chipcregs_t *) regs; -+ uint32 rev, cap, pll, baud_base, div; -+ -+ /* Determine core revision and capabilities */ -+ rev = sb_corerev(sbh); -+ cap = R_REG(&cc->capabilities); -+ pll = cap & CAP_PLL_MASK; -+ -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); -+ -+ if (pll == PLL_TYPE1) { -+ /* PLL clock */ -+ baud_base = sb_clock_rate(pll, -+ R_REG(&cc->clockcontrol_n), -+ R_REG(&cc->clockcontrol_m2)); -+ div = 1; -+ } else if (rev >= 3) { -+ /* Internal backplane clock */ -+ baud_base = sb_clock_rate(pll, -+ R_REG(&cc->clockcontrol_n), -+ R_REG(&cc->clockcontrol_sb)); -+ div = 2; /* Minimum divisor */ -+ W_REG(&cc->uart_clkdiv, div); -+ } else { -+ /* Fixed internal backplane clock */ -+ baud_base = 88000000; -+ div = 48; -+ } -+ -+ /* Clock source depends on strapping if UartClkOverride is unset */ -+ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { -+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { -+ /* Internal divided backplane clock */ -+ baud_base /= div; -+ } else { -+ /* Assume external clock of 1.8432 MHz */ -+ baud_base = 1843200; -+ } -+ } -+ -+ /* Add internal UARTs */ -+ n = cap & CAP_UARTS_MASK; -+ for (i = 0; i < n; i++) { -+ /* Register offset changed after revision 0 */ -+ if (rev) -+ regs = (void *)((ulong) &cc->uart0data + (i * 256)); -+ else -+ regs = (void *)((ulong) &cc->uart0data + (i * 8)); -+ -+ if (add) -+ add(regs, irq, baud_base, 0); -+ } ++ W_REG(&cc->jtagir, ir); ++ W_REG(&cc->jtagdr, dr); ++ tmp = JCMD_START | JCMD_ACC_IRDR | ++ ((IRWIDTH - 1) << JCMD_IRW_SHIFT) | ++ (DRWIDTH - 1); ++ W_REG(&cc->jtagcmd, tmp); ++ while (((tmp = R_REG(&cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) { ++ /* OSL_DELAY(1); */ + } ++ ++ tmp = R_REG(&cc->jtagdr); ++ return (tmp); +} + +/* Returns the SB interrupt flag of the current core. */ +uint32 -+sb_flag(void *sbh) ++sb_flag(sb_t *sbh) +{ + void *regs; + sbconfig_t *sb; @@ -3019,12 +1681,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + SBIPS_INT4_SHIFT +}; + -+/* ++/* + * Returns the MIPS IRQ assignment of the current core. If unassigned, + * 0 is returned. + */ +uint -+sb_irq(void *sbh) ++sb_irq(sb_t *sbh) +{ + uint idx; + void *regs; @@ -3057,7 +1719,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + +/* Clears the specified MIPS IRQ. */ +static void -+sb_clearirq(void *sbh, uint irq) ++BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq) +{ + void *regs; + sbconfig_t *sb; @@ -3073,12 +1735,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); +} + -+/* ++/* + * Assigns the specified MIPS IRQ to the specified core. Shared MIPS + * IRQ 0 may be assigned more than once. + */ +static void -+sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit) ++BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit) +{ + void *regs; + sbconfig_t *sb; @@ -3101,14 +1763,14 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; + W_REG(&sb->sbipsflag, flag); + } -+} ++} + -+/* ++/* + * Initializes clocks and interrupts. SB and NVRAM access must be + * initialized prior to calling. + */ +void -+sb_mips_init(void *sbh) ++BCMINITFN(sb_mips_init)(sb_t *sbh) +{ + ulong hz, ns, tmp; + extifregs_t *eir; @@ -3143,45 +1805,66 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ + tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ + tmp |= CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(&cc->parallelflashwaitcnt, tmp); ++ ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ { ++ W_REG(&cc->flash_waitcount, tmp); ++ W_REG(&cc->pcmcia_memwait, tmp); ++ } ++ else ++ { ++ if (sb_corerev(sbh) < 9) ++ W_REG(&cc->flash_waitcount, tmp); + -+ W_REG(&cc->cs01memwaitcnt, tmp); ++ if ((sb_corerev(sbh) < 9) || ++ ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) { ++ W_REG(&cc->pcmcia_memwait, tmp); ++ } ++ } + } + + /* Chip specific initialization */ -+ switch (sb_chip(sbh)) { ++ switch (BCMINIT(sb_chip)(sbh)) { + case BCM4710_DEVICE_ID: + /* Clear interrupt map */ + for (irq = 0; irq <= 4; irq++) -+ sb_clearirq(sbh, irq); -+ sb_setirq(sbh, 0, SB_CODEC, 0); -+ sb_setirq(sbh, 0, SB_EXTIF, 0); -+ sb_setirq(sbh, 2, SB_ENET, 1); -+ sb_setirq(sbh, 3, SB_ILINE20, 0); -+ sb_setirq(sbh, 4, SB_PCI, 0); ++ BCMINIT(sb_clearirq)(sbh, irq); ++ BCMINIT(sb_setirq)(sbh, 0, SB_CODEC, 0); ++ BCMINIT(sb_setirq)(sbh, 0, SB_EXTIF, 0); ++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 1); ++ BCMINIT(sb_setirq)(sbh, 3, SB_ILINE20, 0); ++ BCMINIT(sb_setirq)(sbh, 4, SB_PCI, 0); + ASSERT(eir); -+ value = nvram_get("et0phyaddr"); ++ value = BCMINIT(nvram_get)("et0phyaddr"); + if (value && !strcmp(value, "31")) { + /* Enable internal UART */ + W_REG(&eir->corecontrol, CC_UE); + /* Give USB its own interrupt */ -+ sb_setirq(sbh, 1, SB_USB, 0); ++ BCMINIT(sb_setirq)(sbh, 1, SB_USB, 0); + } else { + /* Disable internal UART */ + W_REG(&eir->corecontrol, 0); + /* Give Ethernet its own interrupt */ -+ sb_setirq(sbh, 1, SB_ENET, 0); -+ sb_setirq(sbh, 0, SB_USB, 0); ++ BCMINIT(sb_setirq)(sbh, 1, SB_ENET, 0); ++ BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0); + } + break; -+ case BCM4310_DEVICE_ID: -+ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22)); ++ case BCM5350_DEVICE_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ BCMINIT(sb_clearirq)(sbh, irq); ++ BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0); ++ BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0); ++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0); ++ BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0); ++ BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0); + break; + } +} + +uint32 -+sb_mips_clock(void *sbh) ++BCMINITFN(sb_mips_clock)(sb_t *sbh) +{ + extifregs_t *eir; + chipcregs_t *cc; @@ -3200,18 +1883,35 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + n = R_REG(&cc->clockcontrol_n); -+ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) ++ if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) + m = R_REG(&cc->clockcontrol_mips); -+ else if (pll_type == PLL_TYPE3) { ++ else if (pll_type == PLL_TYPE5) { + rate = 200000000; + goto out; ++ } ++ else if (pll_type == PLL_TYPE3) { ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) { /* 5365 is also type3 */ ++ rate = 200000000; ++ goto out; ++ } else ++ m = R_REG(&cc->clockcontrol_m2); /* 5350 uses m2 to control mips */ + } else + m = R_REG(&cc->clockcontrol_sb); + } else + goto out; + -+ /* calculate rate */ -+ rate = sb_clock_rate(pll_type, n, m); ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ rate = 100000000; ++ else ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ ++ if (pll_type == PLL_TYPE6) ++ rate = SB2MIPS_T6(rate); + +out: + /* switch back to previous core */ @@ -3220,26 +1920,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + return rate; +} + -+static void -+icache_probe(int *size, int *lsize) -+{ -+ uint32 config1; -+ uint sets, ways; -+ -+ config1 = MFC0(C0_CONFIG, 1); -+ -+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((*lsize = ((config1 >> 19) & 7))) -+ *lsize = 2 << *lsize; -+ sets = 64 << ((config1 >> 22) & 7); -+ ways = 1 + ((config1 >> 16) & 7); -+ *size = *lsize * sets * ways; -+} -+ +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) + +static void -+handler(void) ++BCMINITFN(handler)(void) +{ + /* Step 11 */ + __asm__ ( @@ -3249,7 +1933,9 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + /* Disable interrupts */ + /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ + "mfc0 $15, $12\n\t" -+ "and $15, $15, -31746\n\t" ++ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ ++ "li $14, -31746\n\t" ++ "and $15, $15, $14\n\t" + "mtc0 $15, $12\n\t" + "eret\n\t" + "nop\n\t" @@ -3260,7 +1946,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + +/* The following MUST come right after handler() */ +static void -+afterhandler(void) ++BCMINITFN(afterhandler)(void) +{ +} + @@ -3268,22 +1954,24 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + * Set the MIPS, backplane and PCI clocks as closely as possible. + */ +bool -+sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) ++BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) +{ + extifregs_t *eir = NULL; + chipcregs_t *cc = NULL; + mipsregs_t *mipsr = NULL; -+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci; -+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio; ++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; ++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; + uint32 pll_type, sync_mode; ++ uint ic_size, ic_lsize; + uint idx, i; -+ struct { ++ typedef struct { + uint32 mipsclock; + uint16 n; + uint32 sb; + uint32 pci33; + uint32 pci25; -+ } type1_table[] = { ++ } n3m_table_t; ++ static n3m_table_t BCMINITDATA(type1_table)[] = { + { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ + { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ + { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ @@ -3307,56 +1995,91 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + }; + typedef struct { + uint32 mipsclock; ++ uint16 n; ++ uint32 m2; /* that is the clockcontrol_m2 */ ++ } type3_table_t; ++ static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */ ++ { 150000000, 0x311, 0x4020005 }, ++ { 200000000, 0x311, 0x4020003 }, ++ }; ++ typedef struct { ++ uint32 mipsclock; + uint32 sbclock; + uint16 n; + uint32 sb; + uint32 pci33; + uint32 m2; + uint32 m3; -+ uint32 ratio; ++ uint32 ratio_cfg; + uint32 ratio_parm; + } n4m_table_t; + -+ n4m_table_t type2_table[] = { -+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, -+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, -+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, -+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 } ++ static n4m_table_t BCMINITDATA(type2_table)[] = { ++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 }, ++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, ++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, ++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 } ++ }; ++ ++ static n4m_table_t BCMINITDATA(type4_table)[] = { ++ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, ++ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, 0x012a00a9 }, ++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, 0x254a14a9 }, ++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, 0x02520129 }, ++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, ++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, 0x02520129 }, ++ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 } + }; + -+ n4m_table_t type4_table[] = { -+ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, -+ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, -+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 }, -+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, -+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 }, -+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, -+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, -+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, -+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, -+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 } ++ static n4m_table_t BCMINITDATA(type7_table)[] = { ++ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, ++ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 }, ++ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 } + }; -+ uint icache_size, ic_lsize; ++ + ulong start, end, dst; + bool ret = FALSE; + + /* get index of the current core */ + idx = sb_coreidx(sbh); ++ clockcontrol_m2 = NULL; + + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { @@ -3364,18 +2087,31 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + clockcontrol_n = &eir->clockcontrol_n; + clockcontrol_sb = &eir->clockcontrol_sb; + clockcontrol_pci = &eir->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; -+ clockcontrol_n = &cc->clockcontrol_n; -+ clockcontrol_sb = &cc->clockcontrol_sb; -+ clockcontrol_pci = &cc->clockcontrol_pci; ++ if (pll_type == PLL_TYPE6) { ++ clockcontrol_n = NULL; ++ clockcontrol_sb = NULL; ++ clockcontrol_pci = NULL; ++ } else { ++ clockcontrol_n = &cc->clockcontrol_n; ++ clockcontrol_sb = &cc->clockcontrol_sb; ++ clockcontrol_pci = &cc->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } + } else + goto done; + -+ /* Store the current clock register values */ -+ orig_n = R_REG(clockcontrol_n); -+ orig_sb = R_REG(clockcontrol_sb); -+ orig_pci = R_REG(clockcontrol_pci); ++ if (pll_type == PLL_TYPE6) { ++ /* Silence compilers */ ++ orig_n = orig_sb = orig_pci = 0; ++ } else { ++ /* Store the current clock register values */ ++ orig_n = R_REG(clockcontrol_n); ++ orig_sb = R_REG(clockcontrol_sb); ++ orig_pci = R_REG(clockcontrol_pci); ++ } + + if (pll_type == PLL_TYPE1) { + /* Keep the current PCI clock if not specified */ @@ -3385,10 +2121,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + } + + /* Search for the closest MIPS clock less than or equal to a preferred value */ -+ for (i = 0; i < ARRAYSIZE(type1_table); i++) { -+ ASSERT(type1_table[i].mipsclock == -+ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb)); -+ if (type1_table[i].mipsclock > mipsclock) ++ for (i = 0; i < ARRAYSIZE(BCMINIT(type1_table)); i++) { ++ ASSERT(BCMINIT(type1_table)[i].mipsclock == ++ sb_clock_rate(pll_type, BCMINIT(type1_table)[i].n, BCMINIT(type1_table)[i].sb)); ++ if (BCMINIT(type1_table)[i].mipsclock > mipsclock) + break; + } + if (i == 0) { @@ -3398,35 +2134,99 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + ret = TRUE; + i--; + } -+ ASSERT(type1_table[i].mipsclock <= mipsclock); ++ ASSERT(BCMINIT(type1_table)[i].mipsclock <= mipsclock); + + /* No PLL change */ -+ if ((orig_n == type1_table[i].n) && -+ (orig_sb == type1_table[i].sb) && -+ (orig_pci == type1_table[i].pci33)) ++ if ((orig_n == BCMINIT(type1_table)[i].n) && ++ (orig_sb == BCMINIT(type1_table)[i].sb) && ++ (orig_pci == BCMINIT(type1_table)[i].pci33)) + goto done; + + /* Set the PLL controls */ -+ W_REG(clockcontrol_n, type1_table[i].n); -+ W_REG(clockcontrol_sb, type1_table[i].sb); ++ W_REG(clockcontrol_n, BCMINIT(type1_table)[i].n); ++ W_REG(clockcontrol_sb, BCMINIT(type1_table)[i].sb); + if (pciclock == 25000000) -+ W_REG(clockcontrol_pci, type1_table[i].pci25); ++ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci25); + else -+ W_REG(clockcontrol_pci, type1_table[i].pci33); ++ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci33); ++ ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ ++ while (1); ++ } else if ((pll_type == PLL_TYPE3) && ++ (BCMINIT(sb_chip)(sbh) != BCM5365_DEVICE_ID)) { ++ /* 5350 */ ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++ ++ for (i = 0; i < ARRAYSIZE(type3_table); i++) { ++ if (type3_table[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(type3_table[i].mipsclock <= mipsclock); ++ ++ /* No PLL change */ ++ orig_m2 = R_REG(&cc->clockcontrol_m2); ++ if ((orig_n == type3_table[i].n) && ++ (orig_m2 == type3_table[i].m2)) { ++ goto done; ++ } ++ ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, type3_table[i].n); ++ W_REG(clockcontrol_m2, type3_table[i].m2); + + /* Reset */ + sb_watchdog(sbh, 1); + while (1); -+ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) { -+ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table; -+ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table); ++ } else if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) { ++ n4m_table_t *table = NULL, *te; ++ uint tabsz = 0; + + ASSERT(cc); + ++ orig_mips = R_REG(&cc->clockcontrol_mips); ++ ++ if (pll_type == PLL_TYPE6) { ++ uint32 new_mips = 0; ++ ++ ret = TRUE; ++ if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) ++ new_mips = CC_T6_MMASK; ++ ++ if (orig_mips == new_mips) ++ goto done; ++ ++ W_REG(&cc->clockcontrol_mips, new_mips); ++ goto end_fill; ++ } ++ ++ if (pll_type == PLL_TYPE2) { ++ table = BCMINIT(type2_table); ++ tabsz = ARRAYSIZE(BCMINIT(type2_table)); ++ } else if (pll_type == PLL_TYPE4) { ++ table = BCMINIT(type4_table); ++ tabsz = ARRAYSIZE(BCMINIT(type4_table)); ++ } else if (pll_type == PLL_TYPE7) { ++ table = BCMINIT(type7_table); ++ tabsz = ARRAYSIZE(BCMINIT(type7_table)); ++ } else ++ ASSERT("No table for plltype" == NULL); ++ + /* Store the current clock register values */ + orig_m2 = R_REG(&cc->clockcontrol_m2); -+ orig_mips = R_REG(&cc->clockcontrol_mips); + orig_ratio_parm = 0; ++ orig_ratio_cfg = 0; + + /* Look up current ratio */ + for (i = 0; i < tabsz; i++) { @@ -3436,6 +2236,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + (orig_m2 == table[i].m2) && + (orig_mips == table[i].m3)) { + orig_ratio_parm = table[i].ratio_parm; ++ orig_ratio_cfg = table[i].ratio_cfg; + break; + } + } @@ -3452,50 +2253,55 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + ret = FALSE; + goto done; + } else { ++ te = &table[i]; + ret = TRUE; + } + + /* No PLL change */ -+ if ((orig_n == table[i].n) && -+ (orig_sb == table[i].sb) && -+ (orig_pci == table[i].pci33) && -+ (orig_m2 == table[i].m2) && -+ (orig_mips == table[i].m3)) ++ if ((orig_n == te->n) && ++ (orig_sb == te->sb) && ++ (orig_pci == te->pci33) && ++ (orig_m2 == te->m2) && ++ (orig_mips == te->m3)) + goto done; + + /* Set the PLL controls */ -+ W_REG(clockcontrol_n, table[i].n); -+ W_REG(clockcontrol_sb, table[i].sb); -+ W_REG(clockcontrol_pci, table[i].pci33); -+ W_REG(&cc->clockcontrol_m2, table[i].m2); -+ W_REG(&cc->clockcontrol_mips, table[i].m3); ++ W_REG(clockcontrol_n, te->n); ++ W_REG(clockcontrol_sb, te->sb); ++ W_REG(clockcontrol_pci, te->pci33); ++ W_REG(&cc->clockcontrol_m2, te->m2); ++ W_REG(&cc->clockcontrol_mips, te->m3); ++ ++ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ ++ if ((pll_type == PLL_TYPE7) && ++ (te->sb != te->m2) && ++ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) ++ W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100); + + /* No ratio change */ -+ if (orig_ratio_parm == table[i].ratio_parm) ++ if (orig_ratio_parm == te->ratio_parm) + goto end_fill; + -+ new_ratio = table[i].ratio_parm; -+ -+ icache_probe(&icache_size, &ic_lsize); ++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); + + /* Preload the code into the cache */ + start = ((ulong) &&start_fill) & ~(ic_lsize - 1); + end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); + while (start < end) { -+ cache_unroll(start, Fill_I); ++ cache_op(start, Fill_I); + start += ic_lsize; + } + + /* Copy the handler */ -+ start = (ulong) &handler; -+ end = (ulong) &afterhandler; ++ start = (ulong) &BCMINIT(handler); ++ end = (ulong) &BCMINIT(afterhandler); + dst = KSEG1ADDR(0x180); + for (i = 0; i < (end - start); i += 4) + *((ulong *)(dst + i)) = *((ulong *)(start + i)); -+ ++ + /* Preload handler into the cache one line at a time */ + for (i = 0; i < (end - start); i += 4) -+ cache_unroll(dst + i, Fill_I); ++ cache_op(dst + i, Fill_I); + + /* Clear BEV bit */ + MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); @@ -3511,8 +2317,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + + start_fill: + /* step 1, set clock ratios */ -+ MTC0(C0_BROADCOM, 3, new_ratio); -+ MTC0(C0_BROADCOM, 1, 8); ++ MTC0(C0_BROADCOM, 3, te->ratio_parm); ++ MTC0(C0_BROADCOM, 1, te->ratio_cfg); + + /* step 2: program timer intr */ + W_REG(&mipsr->timer, 100); @@ -3526,7 +2332,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + MTC0(C0_BROADCOM, 2, 0x9); + + -+ /* steps 5 & 6 */ ++ /* steps 5 & 6 */ + __asm__ __volatile__ ( + ".set\tmips3\n\t" + "wait\n\t" @@ -3535,7 +2341,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + + /* step 7, clear cfg_active */ + MTC0(C0_BROADCOM, 2, 0); -+ ++ + /* Additional Step: set back to orig sync mode */ + MTC0(C0_BROADCOM, 4, sync_mode); + @@ -3564,10 +2370,49 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + return ret; +} + ++/* ++ * This also must be run from the cache on 47xx ++ * so there are no mips core BIU ops in progress ++ * when the PFC is enabled. ++ */ ++ ++static void ++BCMINITFN(_enable_pfc)(uint32 mode) ++{ ++ /* write range */ ++ *(volatile uint32 *)PFC_CR1 = 0xffff0000; ++ ++ /* enable */ ++ *(volatile uint32 *)PFC_CR0 = mode; ++} ++ ++void ++BCMINITFN(enable_pfc)(uint32 mode) ++{ ++ ulong start, end; ++ int i; ++ ++ /* If auto then choose the correct mode for this ++ platform, currently we only ever select one mode */ ++ if (mode == PFC_AUTO) ++ mode = PFC_INST; ++ ++ /* enable prefetch cache if available */ ++ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { ++ start = (ulong) &BCMINIT(_enable_pfc); ++ end = (ulong) &BCMINIT(enable_pfc); ++ ++ /* Preload handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += 4) ++ cache_op(start + i, Fill_I); ++ ++ BCMINIT(_enable_pfc)(mode); ++ } ++} + +/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ +uint32 -+sb_memc_get_ncdl(void *sbh) ++BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh) +{ + sbmemcregs_t *memc; + uint32 ret = 0; @@ -3589,7 +2434,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + dqsg = R_REG(&memc->dqsgatencdl); + + rd &= MEMC_RDNCDLCOR_RD_MASK; -+ wr &= MEMC_WRNCDLCOR_WR_MASK; ++ wr &= MEMC_WRNCDLCOR_WR_MASK; + dqsg &= MEMC_DQSGATENCDL_G_MASK; + + if (config & MEMC_CONFIG_DDR) { @@ -3610,14 +2455,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + + return ret; +} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200 -@@ -0,0 +1,530 @@ ++ +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbpci.c linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c +--- linux.old/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c 2005-12-15 23:50:31.846688500 +0100 +@@ -0,0 +1,531 @@ +/* + * Low-Level PCI and SB support for BCM47xx + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -3625,18 +2471,18 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $ ++ * $Id$ + */ + +#include +#include +#include +#include -+#include +#include ++#include ++#include +#include +#include -+#include +#include +#include + @@ -3655,6 +2501,9 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +/* CardBus mode */ +static bool cardbus = FALSE; + ++/* Disable PCI host core */ ++static bool pci_disabled = FALSE; ++ +/* + * Functions for accessing external PCI configuration space + */ @@ -3663,7 +2512,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +#define PCI_SLOT_MAX 16 + +static uint32 -+config_cmd(void *sbh, uint bus, uint dev, uint func, uint off) ++config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off) +{ + uint coreidx; + sbpciregs_t *regs; @@ -3699,12 +2548,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +} + +static int -+extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + uint32 addr, *reg = NULL, val; + int ret = 0; + -+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) || ++ if (pci_disabled || ++ !(addr = config_cmd(sbh, bus, dev, func, off)) || + !(reg = (uint32 *) REG_MAP(addr, len)) || + BUSPROBE(val, reg)) + val = 0xffffffff; @@ -3726,12 +2576,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +} + +static int -+extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + uint32 addr, *reg = NULL, val; + int ret = 0; + -+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) || ++ if (pci_disabled || ++ !(addr = config_cmd(sbh, bus, dev, func, off)) || + !(reg = (uint32 *) REG_MAP(addr, len)) || + BUSPROBE(val, reg)) + goto done; @@ -3761,7 +2612,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + */ + +static int -+sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + pci_config_regs *cfg; + @@ -3770,7 +2621,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + cfg = &sb_config_regs[dev]; + + ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED(buf, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); + + if (len == 4) + *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); @@ -3785,7 +2636,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +} + +static int -+sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + uint coreidx, n; + void *regs; @@ -3797,7 +2648,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + cfg = &sb_config_regs[dev]; + + ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED(buf, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); + + /* Emulate BAR sizing */ + if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && @@ -3809,12 +2660,14 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; + if (off == OFFSETOF(pci_config_regs, base[0])) + cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); -+ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) ++#if 0 ++ else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) + cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); + else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) + cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); + else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) -+ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/ ++ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1); ++#endif + } + sb_setcoreidx(sbh, coreidx); + return 0; @@ -3833,7 +2686,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +} + +int -+sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + if (bus == 0) + return sb_read_config(sbh, bus, dev, func, off, buf, len); @@ -3842,7 +2695,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm +} + +int -+sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ + if (bus == 0) + return sb_write_config(sbh, bus, dev, func, off, buf, len); @@ -3857,33 +2710,49 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + pci_ban[pci_banned++] = core; +} + -+int __init -+sbpci_init(void *sbh) ++static int ++sbpci_init_pci(sb_t *sbh) +{ -+ uint chip, chiprev, chippkg, coreidx, host, i; ++ uint chip, chiprev, chippkg, host; ++ uint32 boardflags; + sbpciregs_t *pci; + sbconfig_t *sb; -+ pci_config_regs *cfg; -+ void *regs; -+ char varname[8]; -+ uint wlidx = 0; -+ uint16 vendor, core; -+ uint8 class, subclass, progif; + uint32 val; -+ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; -+ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; + + chip = sb_chip(sbh); + chiprev = sb_chiprev(sbh); + chippkg = sb_chippkg(sbh); -+ coreidx = sb_coreidx(sbh); + -+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) ++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) { ++ printf("PCI: no core\n"); ++ pci_disabled = TRUE; + return -1; ++ } + sb_core_reset(sbh, 0); + -+ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) || -+ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID))) ++ boardflags = (uint32) getintvar(NULL, "boardflags"); ++ ++ if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ++ pci_disabled = TRUE; ++ ++ /* ++ * The 200-pin BCM4712 package does not bond out PCI. Even when ++ * PCI is bonded out, some boards may leave the pins ++ * floating. ++ */ ++ if (((chip == BCM4712_DEVICE_ID) && ++ ((chippkg == BCM4712SMALL_PKG_ID) || ++ (chippkg == BCM4712MID_PKG_ID))) || ++ (boardflags & BFL_NOPCI)) ++ pci_disabled = TRUE; ++ ++ /* ++ * If the PCI core should not be touched (disabled, not bonded ++ * out, or pins floating), do not even attempt to access core ++ * registers. Otherwise, try to determine if it is in host ++ * mode. ++ */ ++ if (pci_disabled) + host = 0; + else + host = !BUSPROBE(val, &pci->control); @@ -3900,7 +2769,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + /* Reset the external PCI bus and enable the clock */ + W_REG(&pci->control, 0x5); /* enable the tristate drivers */ + W_REG(&pci->control, 0xd); /* enable the PCI clock */ -+ OSL_DELAY(100); /* delay 100 us */ ++ OSL_DELAY(150); /* delay > 100 us */ + W_REG(&pci->control, 0xf); /* deassert PCI reset */ + W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ + OSL_DELAY(1); /* delay 1 us */ @@ -3910,8 +2779,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + if (cardbus) { + printf("PCI: Enabling CardBus\n"); + /* GPIO 1 resets the CardBus device on bcm94710ap */ -+ sb_gpioout(sbh, 1, 1); -+ sb_gpioouten(sbh, 1, 1); ++ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY); + W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); + } + @@ -3929,6 +2798,29 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + /* Enable PCI interrupts */ + W_REG(&pci->intmask, PCI_INTA); + } ++ ++ return 0; ++} ++ ++static int ++sbpci_init_cores(sb_t *sbh) ++{ ++ uint chip, chiprev, chippkg, coreidx, i; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; ++ void *regs; ++ char varname[8]; ++ uint wlidx = 0; ++ uint16 vendor, core; ++ uint8 class, subclass, progif; ++ uint32 val; ++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; ++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; ++ ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); ++ coreidx = sb_coreidx(sbh); + + /* Scan the SB bus */ + bzero(sb_config_regs, sizeof(sb_config_regs)); @@ -3983,7 +2875,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + case SB_PCI: + class = PCI_CLASS_BRIDGE; + subclass = PCI_BRIDGE_PCI; -+ //break; ++ break; + case SB_MIPS: + case SB_MIPS33: + class = PCI_CLASS_CPU; @@ -4016,6 +2908,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + subclass = PCI_CRYPT_NETWORK; + core = BCM47XX_IPSEC_ID; + break; ++ case SB_ROBO: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ core = BCM47XX_ROBO_ID; ++ break; + case SB_EXTIF: + case SB_CC: + class = PCI_CLASS_MEMORY; @@ -4053,9 +2950,9 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + cfg->sub_class = subclass; + cfg->base_class = class; + cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); -+ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/; -+ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/; -+ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/; ++ cfg->base[1] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch1))); ++ cfg->base[2] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch2))); ++ cfg->base[3] = 0;//htol32(sb_base(R_REG(&sb->sbadmatch3))); + cfg->base[4] = 0; + cfg->base[5] = 0; + if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) @@ -4086,110 +2983,56 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm + return 0; +} + -+void -+sbpci_check(void *sbh) ++int __init ++sbpci_init(sb_t *sbh) +{ -+ uint coreidx; -+ sbpciregs_t *pci; -+ uint32 sbtopci1; -+ uint32 buf[64], *ptr, i; -+ ulong pa; -+ volatile uint j; -+ -+ coreidx = sb_coreidx(sbh); -+ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); -+ -+ /* Clear the test array */ -+ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL); -+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); -+ memset(ptr, 0, sizeof(buf)); -+ -+ /* Point PCI window 1 to memory */ -+ sbtopci1 = R_REG(&pci->sbtopci1); -+ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK)); -+ -+ /* Fill the test array via PCI window 1 */ -+ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf)); -+ for (i = 0; i < ARRAYSIZE(buf); i++) { -+ for (j = 0; j < 2; j++); -+ W_REG(&ptr[i], i); -+ } -+ REG_UNMAP(ptr); -+ -+ /* Restore PCI window 1 */ -+ W_REG(&pci->sbtopci1, sbtopci1); -+ -+ /* Check the test array */ -+ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL); -+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); -+ for (i = 0; i < ARRAYSIZE(buf); i++) { -+ if (ptr[i] != i) -+ break; -+ } -+ -+ /* Change the clock if the test fails */ -+ if (i < ARRAYSIZE(buf)) { -+ uint32 req, cur; -+ -+ cur = sb_clock(sbh); -+ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000); -+ for (req = 104000000; req < 176000000; req += 4000000) { -+ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000); -+ /* This will only reset if the clocks are valid and have changed */ -+ sb_mips_setclock(sbh, req, 0, 0); -+ } -+ /* Should not reach here */ -+ ASSERT(0); -+ } -+ -+ sb_setcoreidx(sbh, coreidx); ++ sbpci_init_pci(sbh); ++ sbpci_init_cores(sbh); ++ return 0; +} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200 -@@ -0,0 +1,1895 @@ ++ +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbutils.c linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c +--- linux.old/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c 2005-12-17 01:21:12.951254500 +0100 +@@ -0,0 +1,2370 @@ +/* + * Misc utility routines for accessing chip-specific features + * of the SiliconBackplane-based Broadcom chips. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ ++ * $Id$ + */ + +#include +#include ++#include +#include +#include +#include +#include +#include +#include -+#include +#include -+#include +#include + +/* debug/trace */ +#define SB_ERROR(args) + ++ +typedef uint32 (*sb_intrsoff_t)(void *intr_arg); +typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); ++typedef bool (*sb_intrsenabled_t)(void *intr_arg); + +/* misc sb info needed by some of the routines */ +typedef struct sb_info { -+ uint chip; /* chip number */ -+ uint chiprev; /* chip revision */ -+ uint chippkg; /* chip package option */ -+ uint boardtype; /* board type */ -+ uint boardvendor; /* board vendor id */ -+ uint bus; /* what bus type we are going through */ ++ ++ struct sb_pub sb; /* back plane public state(must be first field of sb_info */ + + void *osh; /* osl os handle */ + void *sdh; /* bcmsdh handle */ @@ -4199,14 +3042,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + + uint curidx; /* current core index */ + uint dev_coreid; /* the core provides driver functions */ -+ uint pciidx; /* pci core index */ -+ uint pcirev; /* pci core rev */ -+ -+ uint pcmciaidx; /* pcmcia core index */ -+ uint pcmciarev; /* pcmcia core rev */ -+ bool memseg; /* flag to toggle MEM_SEG register */ -+ -+ uint ccrev; /* chipc core rev */ + + uint gpioidx; /* gpio control core index */ + uint gpioid; /* gpio control coretype */ @@ -4217,32 +3052,49 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + void *intr_arg; /* interrupt callback function arg */ + sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ + sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ ++ sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */ ++ +} sb_info_t; + +/* local prototypes */ -+static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); -+static void sb_scan(sb_info_t *si); -+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val); -+static uint _sb_coreidx(void *sbh); -+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit); -+static uint sb_pcidev2chip(uint pcidev); -+static uint sb_chip2numcores(uint chip); ++static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, int *varsz); ++static void BCMINIT(sb_scan)(sb_info_t *si); ++static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val); ++static uint _sb_coreidx(sb_info_t *si); ++static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit); ++static uint BCMINIT(sb_pcidev2chip)(uint pcidev); ++static uint BCMINIT(sb_chip2numcores)(uint chip); ++static int sb_pci_fixcfg(sb_info_t *si); ++ ++/* delay needed between the mdio control/ mdiodata register data access */ ++#define PR28829_DELAY() OSL_DELAY(10) ++ ++ ++/* global variable to indicate reservation/release of gpio's*/ ++static uint32 sb_gpioreservation = 0; + +#define SB_INFO(sbh) (sb_info_t*)sbh +#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) -+#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \ -+ && ISALIGNED((x), SB_CORE_SIZE)) -+#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE)) -+#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF) ++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE)) ++#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE)) ++#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF) +#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) +#define BADIDX (SB_MAXCORES+1) ++#define NOREV -1 ++ ++#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) ++ ++/* sonicsrev */ ++#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT) ++#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT) + +#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) +#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) +#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) +#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) + -+/* ++/* + * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ + * after core switching to avoid invalid register accesss inside ISR. + */ @@ -4253,173 +3105,98 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ + (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } + -+/* power control defines */ -+#define PLL_DELAY 150 /* 150us pll on delay */ -+#define FREF_DELAY 15 /* 15us fref change delay */ ++/* dynamic clock control defines */ +#define LPOMINFREQ 25000 /* low power oscillator min */ +#define LPOMAXFREQ 43000 /* low power oscillator max */ -+#define XTALMINFREQ 19800000 /* 20mhz - 1% */ -+#define XTALMAXFREQ 20200000 /* 20mhz + 1% */ -+#define PCIMINFREQ 25000000 /* 25mhz */ -+#define PCIMAXFREQ 34000000 /* 33mhz + fudge */ -+ -+#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */ ++#define XTALMINFREQ 19800000 /* 20 MHz - 1% */ ++#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */ ++#define PCIMINFREQ 25000000 /* 25 MHz */ ++#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */ + ++#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ ++#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ + -+static uint32 -+sb_read_sbreg(void *sbh, volatile uint32 *sbr) -+{ -+ sb_info_t *si; -+ uint8 tmp; -+ uint32 val, intr_val = 0; ++#define MIN_DUMPBUFLEN 32 /* debug */ + -+ si = SB_INFO(sbh); ++/* GPIO Based LED powersave defines */ ++#define DEFAULT_GPIO_ONTIME 10 ++#define DEFAULT_GPIO_OFFTIME 90 + -+ /* -+ * compact flash only has 11 bits address, while we needs 12 bits address. -+ * MEM_SEG will be OR'd with other 11 bits address in hardware, -+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). -+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special -+ */ -+ if(si->memseg) { -+ INTR_OFF(si, intr_val); -+ tmp = 1; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/ -+ } ++#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) + -+ val = R_REG(sbr); -+ -+ if(si->memseg) { -+ tmp = 0; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ INTR_RESTORE(si, intr_val); -+ } ++static uint32 ++sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr) ++{ ++ uint32 val = R_REG(sbr); + + return (val); +} + +static void -+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v) ++sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v) +{ -+ sb_info_t *si; -+ uint8 tmp; -+ volatile uint32 dummy; -+ uint32 intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ -+ /* -+ * compact flash only has 11 bits address, while we needs 12 bits address. -+ * MEM_SEG will be OR'd with other 11 bits address in hardware, -+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). -+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special -+ */ -+ if(si->memseg) { -+ INTR_OFF(si, intr_val); -+ tmp = 1; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */ -+ } -+ -+ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) { -+#ifdef IL_BIGENDIAN -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+#else -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); -+#endif -+ } else -+ W_REG(sbr, v); -+ -+ if(si->memseg) { -+ tmp = 0; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ INTR_RESTORE(si, intr_val); -+ } ++ W_REG(sbr, v); +} + -+/* -+ * Allocate a sb handle. -+ * devid - pci device id (used to determine chip#) -+ * osh - opaque OS handle -+ * regs - virtual address of initial core registers -+ * bustype - pci/pcmcia/sb/sdio/etc -+ * vars - pointer to a pointer area for "environment" variables -+ * varsz - pointer to int to return the size of the vars -+ */ -+void* -+sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) -+{ -+ sb_info_t *si; -+ -+ /* alloc sb_info_t */ -+ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) { -+ SB_ERROR(("sb_attach: malloc failed!\n")); -+ return (NULL); -+ } -+ -+ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz)); -+} ++/* Using sb_kattach depends on SB_BUS support, either implicit */ ++/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */ ++#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS) + +/* global kernel resource */ +static sb_info_t ksi; + +/* generic kernel variant of sb_attach() */ -+void* -+sb_kattach() ++sb_t * ++BCMINITFN(sb_kattach)() +{ + uint32 *regs; -+ char *unused; -+ int varsz; + + if (ksi.curmap == NULL) { + uint32 cid; ++ + regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); + cid = R_REG((uint32 *)regs); -+ if ((cid == 0x08104712) || (cid == 0x08114712)) { ++ if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) && ++ ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) { + uint32 *scc, val; + -+ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); ++ scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); + val = R_REG(scc); + SB_ERROR((" initial scc = 0x%x\n", val)); + val |= SCC_SS_XTAL; + W_REG(scc, val); + } + -+ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, -+ SB_BUS, NULL, &unused, &varsz); ++ if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, ++ SB_BUS, NULL, NULL, NULL) == NULL) { ++ return NULL; ++ } + } + -+ return &ksi; ++ return (sb_t *)&ksi; +} ++#endif + -+static void* -+sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) ++static sb_info_t * ++BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, int *varsz) +{ + uint origidx; + chipcregs_t *cc; ++ sbconfig_t *sb; + uint32 w; + + ASSERT(GOODREGS(regs)); + + bzero((uchar*)si, sizeof (sb_info_t)); + -+ si->pciidx = si->gpioidx = BADIDX; ++ si->sb.buscoreidx = si->gpioidx = BADIDX; + + si->osh = osh; + si->curmap = regs; + si->sdh = sdh; + -+ /* 4317A0 PCMCIA is no longer supported */ -+ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317)) -+ return NULL; -+ + /* check to see if we are a sb core mimic'ing a pci core */ + if (bustype == PCI_BUS) { + if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) @@ -4428,142 +3205,149 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + bustype = PCI_BUS; + } + -+ si->bus = bustype; ++ si->sb.bustype = bustype; ++ if (si->sb.bustype != BUSTYPE(si->sb.bustype)) { ++ SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n", ++ si->sb.bustype, BUSTYPE(si->sb.bustype))); ++ return NULL; ++ } + + /* kludge to enable the clock on the 4306 which lacks a slowclock */ -+ if (si->bus == PCI_BUS) -+ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON); ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) ++ sb_clkctl_xtal(&si->sb, XTAL|PLL, ON); + -+ /* clear any previous epidiag-induced target abort */ -+ sb_taclear((void*)si); ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32)); ++ if (!GOODCOREADDR(w)) ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE); ++ } + + /* initialize current core index value */ -+ si->curidx = _sb_coreidx((void*)si); ++ si->curidx = _sb_coreidx(si); ++ ++ if (si->curidx == BADIDX) { ++ SB_ERROR(("sb_doattach: bad core index\n")); ++ return NULL; ++ } ++ ++ /* get sonics backplane revision */ ++ sb = REGS2SB(si->curmap); ++ si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT; + + /* keep and reuse the initial register mapping */ + origidx = si->curidx; -+ if (si->bus == SB_BUS) ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) + si->regs[origidx] = regs; + -+ /* initialize the vars */ -+ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) { -+ SB_ERROR(("sb_attach: srom_var_init failed\n")); -+ goto bad; -+ } -+ -+ if (si->bus == PCMCIA_BUS) { -+ w = getintvar(*vars, "regwindowsz"); -+ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE; -+ } -+ + /* is core-0 a chipcommon core? */ + si->numcores = 1; -+ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0); -+ if (sb_coreid((void*)si) != SB_CC) ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0); ++ if (sb_coreid(&si->sb) != SB_CC) + cc = NULL; + + /* determine chip id and rev */ + if (cc) { + /* chip common core found! */ -+ si->chip = R_REG(&cc->chipid) & CID_ID_MASK; -+ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; -+ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; ++ si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK; ++ si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; + } else { -+ /* without chip common core, get devid for PCMCIA */ -+ if (si->bus == PCMCIA_BUS) -+ devid = getintvar(*vars, "devid"); -+ + /* no chip common core -- must convert device id to chip id */ -+ if ((si->chip = sb_pcidev2chip(devid)) == 0) { -+ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid)); -+ goto bad; ++ if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) { ++ SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid)); ++ sb_setcoreidx(&si->sb, origidx); ++ return NULL; + } -+ -+ /* -+ * The chip revision number is hardwired into all -+ * of the pci function config rev fields and is -+ * independent from the individual core revision numbers. -+ * For example, the "A0" silicon of each chip is chip rev 0. -+ * For PCMCIA we get it from the CIS instead. -+ */ -+ if (si->bus == PCMCIA_BUS) { -+ ASSERT(vars); -+ si->chiprev = getintvar(*vars, "chiprev"); -+ } else if (si->bus == PCI_BUS) { -+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); -+ si->chiprev = w & 0xff; -+ } else -+ si->chiprev = 0; + } + + /* get chipcommon rev */ -+ si->ccrev = cc? sb_corerev((void*)si) : 0; -+ ++ si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV; ++ + /* determine numcores */ -+ if ((si->ccrev == 4) || (si->ccrev >= 6)) ++ if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6))) + si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; + else -+ si->numcores = sb_chip2numcores(si->chip); ++ si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip); + + /* return to original core */ -+ sb_setcoreidx((void*)si, origidx); ++ sb_setcoreidx(&si->sb, origidx); + + /* sanity checks */ -+ ASSERT(si->chip); -+ /* 4704A1 is chiprev 8 :-( */ -+ ASSERT((si->chiprev < 8) || -+ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8)))); ++ ASSERT(si->sb.chip); + + /* scan for cores */ -+ sb_scan(si); ++ BCMINIT(sb_scan)(si); + -+ /* pci core is required */ -+ if (!GOODIDX(si->pciidx)) { -+ SB_ERROR(("sb_attach: pci core not found\n")); -+ goto bad; ++ /* fixup necessary chip/core configurations */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ if (sb_pci_fixcfg(si)) { ++ SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n")); ++ return NULL; ++ } ++ } ++ ++ /* srom_var_init() depends on sb_scan() info */ ++ if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) { ++ SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n")); ++ return (NULL); ++ } ++ ++ if (cc == NULL) { ++ /* ++ * The chip revision number is hardwired into all ++ * of the pci function config rev fields and is ++ * independent from the individual core revision numbers. ++ * For example, the "A0" silicon of each chip is chip rev 0. ++ */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); ++ si->sb.chiprev = w & 0xff; ++ } else ++ si->sb.chiprev = 0; + } + + /* gpio control core is required */ + if (!GOODIDX(si->gpioidx)) { -+ SB_ERROR(("sb_attach: gpio control core not found\n")); -+ goto bad; ++ SB_ERROR(("sb_doattach: gpio control core not found\n")); ++ return NULL; + } + + /* get boardtype and boardrev */ -+ switch (si->bus) { ++ switch (BUSTYPE(si->sb.bustype)) { + case PCI_BUS: + /* do a pci config read to get subsystem id and subvendor id */ + w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); -+ si->boardvendor = w & 0xffff; -+ si->boardtype = (w >> 16) & 0xffff; -+ break; -+ -+ case PCMCIA_BUS: -+ case SDIO_BUS: -+ si->boardvendor = getintvar(*vars, "manfid"); -+ si->boardtype = getintvar(*vars, "prodid"); ++ si->sb.boardvendor = w & 0xffff; ++ si->sb.boardtype = (w >> 16) & 0xffff; + break; + + case SB_BUS: -+ si->boardvendor = VENDOR_BROADCOM; -+ si->boardtype = 0xffff; ++ case JTAG_BUS: ++ si->sb.boardvendor = VENDOR_BROADCOM; ++ if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0) ++ si->sb.boardtype = 0xffff; + break; + } + -+ if (si->boardtype == 0) { -+ SB_ERROR(("sb_attach: unknown board type\n")); -+ ASSERT(si->boardtype); ++ if (si->sb.boardtype == 0) { ++ SB_ERROR(("sb_doattach: unknown board type\n")); ++ ASSERT(si->sb.boardtype); + } + -+ return ((void*)si); ++ /* setup the GPIO based LED powersave register */ ++ if (si->sb.ccrev >= 16) { ++ w = getintvar(*vars, "gpiotimerval"); ++ if (!w) ++ w = DEFAULT_GPIOTIMERVAL; ++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w); ++ } + -+bad: -+ MFREE(si, sizeof (sb_info_t)); -+ return (NULL); ++ ++ return (si); +} + +uint -+sb_coreid(void *sbh) ++sb_coreid(sb_t *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -4571,11 +3355,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + -+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); ++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); +} + +uint -+sb_coreidx(void *sbh) ++sb_coreidx(sb_t *sbh) +{ + sb_info_t *si; + @@ -4585,46 +3369,41 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* return current index of core */ +static uint -+_sb_coreidx(void *sbh) ++_sb_coreidx(sb_info_t *si) +{ -+ sb_info_t *si; + sbconfig_t *sb; + uint32 sbaddr = 0; + -+ si = SB_INFO(sbh); + ASSERT(si); + -+ switch (si->bus) { ++ switch (BUSTYPE(si->sb.bustype)) { + case SB_BUS: + sb = REGS2SB(si->curmap); -+ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0)); ++ sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0)); + break; + + case PCI_BUS: + sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); + break; + -+ case PCMCIA_BUS: { -+ uint8 tmp; -+ -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); -+ sbaddr = (uint)tmp << 12; -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); -+ sbaddr |= (uint)tmp << 16; -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); -+ sbaddr |= (uint)tmp << 24; ++#ifdef BCMJTAG ++ case JTAG_BUS: ++ sbaddr = (uint32)si->curmap; + break; -+ } ++#endif /* BCMJTAG */ ++ + default: + ASSERT(0); + } + -+ ASSERT(GOODCOREADDR(sbaddr)); -+ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE); ++ if (!GOODCOREADDR(sbaddr)) ++ return BADIDX; ++ ++ return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE); +} + +uint -+sb_corevendor(void *sbh) ++sb_corevendor(sb_t *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -4632,26 +3411,37 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + -+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); ++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); +} + +uint -+sb_corerev(void *sbh) ++sb_corerev(sb_t *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; ++ uint sbidh; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); ++ sbidh = R_SBREG(si, &(sb)->sbidhigh); ++ ++ return (SBCOREREV(sbidh)); ++} ++ ++void * ++sb_osh(sb_t *sbh) ++{ ++ sb_info_t *si; + -+ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK); ++ si = SB_INFO(sbh); ++ return si->osh; +} + +#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) + +/* set/clear sbtmstatelow core-specific flags */ +uint32 -+sb_coreflags(void *sbh, uint32 mask, uint32 val) ++sb_coreflags(sb_t *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -4665,40 +3455,69 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + + /* mask and set */ + if (mask || val) { -+ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val; -+ W_SBREG(sbh, &sb->sbtmstatelow, w); ++ w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val; ++ W_SBREG(si, &sb->sbtmstatelow, w); + } + + /* return the new value */ -+ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW); ++ return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW); +} + +/* set/clear sbtmstatehigh core-specific flags */ +uint32 -+sb_coreflagshi(void *sbh, uint32 mask, uint32 val) ++sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; ++ ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTMH_FL_MASK) == 0); ++ ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val; ++ W_SBREG(si, &sb->sbtmstatehigh, w); ++ } ++ ++ /* return the new value */ ++ return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK); ++} ++ ++/* caller needs to take care of core-specific bist hazards */ ++int ++sb_corebist(sb_t *sbh, uint coreid, uint coreunit) +{ ++ uint32 sblo; ++ uint coreidx; + sb_info_t *si; -+ sbconfig_t *sb; -+ uint32 w; ++ int result = 0; + + si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); + -+ ASSERT((val & ~mask) == 0); -+ ASSERT((mask & ~SBTMH_FL_MASK) == 0); ++ coreidx = sb_findcoreidx(si, coreid, coreunit); ++ if (!GOODIDX(coreidx)) ++ result = BCME_ERROR; ++ else { ++ sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0); ++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE)); ++ ++ SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000); ++ ++ if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF) ++ result = BCME_ERROR; + -+ /* mask and set */ -+ if (mask || val) { -+ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val; -+ W_SBREG(sbh, &sb->sbtmstatehigh, w); ++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo); + } + -+ /* return the new value */ -+ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK); ++ return result; +} + +bool -+sb_iscoreup(void *sbh) ++sb_iscoreup(sb_t *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -4706,7 +3525,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + -+ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK); ++ return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK); +} + +/* @@ -4714,9 +3533,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + * switch back to the original core, and return the new value. + */ +static uint -+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val) ++sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val) +{ -+ sb_info_t *si; + uint origidx; + uint32 *r; + uint w; @@ -4726,20 +3544,19 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + ASSERT(regoff < SB_CORE_SIZE); + ASSERT((val & ~mask) == 0); + -+ si = SB_INFO(sbh); ++ INTR_OFF(si, intr_val); + + /* save current core index */ -+ origidx = sb_coreidx(sbh); ++ origidx = sb_coreidx(&si->sb); + + /* switch core */ -+ INTR_OFF(si, intr_val); -+ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff); ++ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff); + + /* mask and set */ + if (mask || val) { + if (regoff >= SBCONFIGOFF) { -+ w = (R_SBREG(sbh, r) & ~mask) | val; -+ W_SBREG(sbh, r, w); ++ w = (R_SBREG(si, r) & ~mask) | val; ++ W_SBREG(si, r, w); + } else { + w = (R_REG(r) & ~mask) | val; + W_REG(r, w); @@ -4747,50 +3564,78 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + } + + /* readback */ -+ w = R_SBREG(sbh, r); ++ if (regoff >= SBCONFIGOFF) ++ w = R_SBREG(si, r); ++ else ++ w = R_REG(r); + + /* restore core index */ + if (origidx != coreidx) -+ sb_setcoreidx(sbh, origidx); ++ sb_setcoreidx(&si->sb, origidx); + + INTR_RESTORE(si, intr_val); + return (w); +} + ++#define DWORD_ALIGN(x) (x & ~(0x03)) ++#define BYTE_POS(x) (x & 0x3) ++#define WORD_POS(x) (x & 0x1) ++ ++#define BYTE_SHIFT(x) (8 * BYTE_POS(x)) ++#define WORD_SHIFT(x) (16 * WORD_POS(x)) ++ ++#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF) ++#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF) ++ ++#define read_pci_cfg_byte(a) \ ++ (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff) ++ ++#define read_pci_cfg_write(a) \ ++ (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff) ++ ++ +/* scan the sb enumerated space to identify all cores */ +static void -+sb_scan(sb_info_t *si) ++BCMINITFN(sb_scan)(sb_info_t *si) +{ -+ void *sbh; + uint origidx; + uint i; ++ bool pci; ++ uint pciidx; ++ uint pcirev; ++ + -+ sbh = (void*) si; + + /* numcores should already be set */ + ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); + + /* save current core index */ -+ origidx = sb_coreidx(sbh); ++ origidx = sb_coreidx(&si->sb); + -+ si->pciidx = si->gpioidx = BADIDX; ++ si->sb.buscorerev = NOREV; ++ si->sb.buscoreidx = BADIDX; + -+ for (i = 0; i < si->numcores; i++) { -+ sb_setcoreidx(sbh, i); -+ si->coreid[i] = sb_coreid(sbh); ++ si->gpioidx = BADIDX; + -+ if (si->coreid[i] == SB_CC) -+ si->ccrev = sb_corerev(sbh); ++ pci = FALSE; ++ pcirev = NOREV; ++ pciidx = BADIDX; + -+ else if (si->coreid[i] == SB_PCI) { -+ si->pciidx = i; -+ si->pcirev = sb_corerev(sbh); ++ for (i = 0; i < si->numcores; i++) { ++ sb_setcoreidx(&si->sb, i); ++ si->coreid[i] = sb_coreid(&si->sb); + -+ }else if (si->coreid[i] == SB_PCMCIA){ -+ si->pcmciaidx = i; -+ si->pcmciarev = sb_corerev(sbh); ++ if (si->coreid[i] == SB_PCI) { ++ pciidx = i; ++ pcirev = sb_corerev(&si->sb); ++ pci = TRUE; + } + } ++ if (pci) { ++ si->sb.buscoretype = SB_PCI; ++ si->sb.buscorerev = pcirev; ++ si->sb.buscoreidx = pciidx; ++ } + + /* + * Find the gpio "controlling core" type and index. @@ -4799,24 +3644,25 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + * - else if there's a pci core (rev >= 2) - use that + * - else there had better be an extif core (4710 only) + */ -+ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) { -+ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0); ++ if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) { ++ si->gpioidx = sb_findcoreidx(si, SB_CC, 0); + si->gpioid = SB_CC; -+ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) { -+ si->gpioidx = si->pciidx; ++ } else if (PCI(si) && (si->sb.buscorerev >= 2)) { ++ si->gpioidx = si->sb.buscoreidx; + si->gpioid = SB_PCI; -+ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) { -+ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0); ++ } else if (sb_findcoreidx(si, SB_EXTIF, 0)) { ++ si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0); + si->gpioid = SB_EXTIF; -+ } ++ } else ++ ASSERT(si->gpioidx != BADIDX); + + /* return to original core index */ -+ sb_setcoreidx(sbh, origidx); ++ sb_setcoreidx(&si->sb, origidx); +} + +/* may be called with core in reset */ +void -+sb_detach(void *sbh) ++sb_detach(sb_t *sbh) +{ + sb_info_t *si; + uint idx; @@ -4826,26 +3672,27 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + if (si == NULL) + return; + -+ if (si->bus == SB_BUS) ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) + for (idx = 0; idx < SB_MAXCORES; idx++) + if (si->regs[idx]) { + REG_UNMAP(si->regs[idx]); + si->regs[idx] = NULL; + } + -+ MFREE(si, sizeof (sb_info_t)); ++ if (si != &ksi) ++ MFREE(si->osh, si, sizeof (sb_info_t)); +} + +/* use pci dev id to determine chip id for chips not having a chipcommon core */ +static uint -+sb_pcidev2chip(uint pcidev) ++BCMINITFN(sb_pcidev2chip)(uint pcidev) +{ + if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) + return (BCM4710_DEVICE_ID); -+ if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID)) -+ return (BCM4610_DEVICE_ID); + if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) + return (BCM4402_DEVICE_ID); ++ if (pcidev == BCM4401_ENET_ID) ++ return (BCM4402_DEVICE_ID); + if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) + return (BCM4307_DEVICE_ID); + if (pcidev == BCM4301_DEVICE_ID) @@ -4856,23 +3703,19 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* convert chip number to number of i/o cores */ +static uint -+sb_chip2numcores(uint chip) ++BCMINITFN(sb_chip2numcores)(uint chip) +{ -+ if (chip == 0x4710) ++ if (chip == BCM4710_DEVICE_ID) + return (9); -+ if (chip == 0x4610) -+ return (9); -+ if (chip == 0x4402) ++ if (chip == BCM4402_DEVICE_ID) + return (3); -+ if ((chip == 0x4307) || (chip == 0x4301)) ++ if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID)) + return (5); -+ if (chip == 0x4310) -+ return (8); -+ if (chip == 0x4306) /* < 4306c0 */ ++ if (chip == BCM4306_DEVICE_ID) /* < 4306c0 */ + return (6); -+ if (chip == 0x4704) ++ if (chip == BCM4704_DEVICE_ID) + return (9); -+ if (chip == 0x5365) ++ if (chip == BCM5365_DEVICE_ID) + return (7); + + SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); @@ -4882,13 +3725,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* return index of coreid or BADIDX if not found */ +static uint -+sb_findcoreidx(void *sbh, uint coreid, uint coreunit) ++sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit) +{ -+ sb_info_t *si; + uint found; + uint i; + -+ si = SB_INFO(sbh); + found = 0; + + for (i = 0; i < si->numcores; i++) @@ -4901,28 +3742,31 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + return (BADIDX); +} + -+/* change logical "focus" to the indiciated core */ ++/* ++ * this function changes logical "focus" to the indiciated core, ++ * must be called with interrupt off. ++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core ++ */ +void* -+sb_setcoreidx(void *sbh, uint coreidx) ++sb_setcoreidx(sb_t *sbh, uint coreidx) +{ + sb_info_t *si; + uint32 sbaddr; -+ uint8 tmp; + + si = SB_INFO(sbh); + + if (coreidx >= si->numcores) + return (NULL); -+ ++ + /* + * If the user has provided an interrupt mask enabled function, + * then assert interrupts are disabled before switching the core. + */ -+ ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg)); ++ ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg)); + + sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); + -+ switch (si->bus) { ++ switch (BUSTYPE(si->sb.bustype)) { + case SB_BUS: + /* map new one */ + if (!si->regs[coreidx]) { @@ -4937,14 +3781,16 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); + break; + -+ case PCMCIA_BUS: -+ tmp = (sbaddr >> 12) & 0x0f; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); -+ tmp = (sbaddr >> 16) & 0xff; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); -+ tmp = (sbaddr >> 24) & 0xff; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); ++#ifdef BCMJTAG ++ case JTAG_BUS: ++ /* map new one */ ++ if (!si->regs[coreidx]) { ++ si->regs[coreidx] = (void *)sbaddr; ++ ASSERT(GOODREGS(si->regs[coreidx])); ++ } ++ si->curmap = si->regs[coreidx]; + break; ++#endif /* BCMJTAG */ + } + + si->curidx = coreidx; @@ -4952,16 +3798,19 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + return (si->curmap); +} + -+/* change logical "focus" to the indicated core */ ++/* ++ * this function changes logical "focus" to the indiciated core, ++ * must be called with interrupt off. ++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core ++ */ +void* -+sb_setcore(void *sbh, uint coreid, uint coreunit) ++sb_setcore(sb_t *sbh, uint coreid, uint coreunit) +{ + sb_info_t *si; + uint idx; + + si = SB_INFO(sbh); -+ -+ idx = sb_findcoreidx(sbh, coreid, coreunit); ++ idx = sb_findcoreidx(si, coreid, coreunit); + if (!GOODIDX(idx)) + return (NULL); + @@ -4970,125 +3819,145 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* return chip number */ +uint -+sb_chip(void *sbh) ++BCMINITFN(sb_chip)(sb_t *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); -+ return (si->chip); ++ return (si->sb.chip); +} + +/* return chip revision number */ +uint -+sb_chiprev(void *sbh) ++BCMINITFN(sb_chiprev)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.chiprev); ++} ++ ++/* return chip common revision number */ ++uint ++BCMINITFN(sb_chipcrev)(sb_t *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); -+ return (si->chiprev); ++ return (si->sb.ccrev); +} + +/* return chip package option */ +uint -+sb_chippkg(void *sbh) ++BCMINITFN(sb_chippkg)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.chippkg); ++} ++ ++/* return PCI core rev. */ ++uint ++BCMINITFN(sb_pcirev)(sb_t *sbh) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ return (si->sb.buscorerev); ++} ++ ++bool ++BCMINITFN(sb_war16165)(sb_t *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); -+ return (si->chippkg); ++ ++ return (PCI(si) && (si->sb.buscorerev <= 10)); +} + +/* return board vendor id */ +uint -+sb_boardvendor(void *sbh) ++BCMINITFN(sb_boardvendor)(sb_t *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); -+ return (si->boardvendor); ++ return (si->sb.boardvendor); +} + +/* return boardtype */ +uint -+sb_boardtype(void *sbh) ++BCMINITFN(sb_boardtype)(sb_t *sbh) +{ + sb_info_t *si; + char *var; + + si = SB_INFO(sbh); + -+ if (si->bus == SB_BUS && si->boardtype == 0xffff) { ++ if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) { + /* boardtype format is a hex string */ -+ si->boardtype = getintvar(NULL, "boardtype"); ++ si->sb.boardtype = getintvar(NULL, "boardtype"); + + /* backward compatibility for older boardtype string format */ -+ if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) { ++ if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) { + if (!strcmp(var, "bcm94710dev")) -+ si->boardtype = BCM94710D_BOARD; ++ si->sb.boardtype = BCM94710D_BOARD; + else if (!strcmp(var, "bcm94710ap")) -+ si->boardtype = BCM94710AP_BOARD; -+ else if (!strcmp(var, "bcm94310u")) -+ si->boardtype = BCM94310U_BOARD; -+ else if (!strcmp(var, "bu4711")) -+ si->boardtype = BU4711_BOARD; ++ si->sb.boardtype = BCM94710AP_BOARD; + else if (!strcmp(var, "bu4710")) -+ si->boardtype = BU4710_BOARD; ++ si->sb.boardtype = BU4710_BOARD; + else if (!strcmp(var, "bcm94702mn")) -+ si->boardtype = BCM94702MN_BOARD; ++ si->sb.boardtype = BCM94702MN_BOARD; + else if (!strcmp(var, "bcm94710r1")) -+ si->boardtype = BCM94710R1_BOARD; ++ si->sb.boardtype = BCM94710R1_BOARD; + else if (!strcmp(var, "bcm94710r4")) -+ si->boardtype = BCM94710R4_BOARD; ++ si->sb.boardtype = BCM94710R4_BOARD; + else if (!strcmp(var, "bcm94702cpci")) -+ si->boardtype = BCM94702CPCI_BOARD; ++ si->sb.boardtype = BCM94702CPCI_BOARD; + else if (!strcmp(var, "bcm95380_rr")) -+ si->boardtype = BCM95380RR_BOARD; ++ si->sb.boardtype = BCM95380RR_BOARD; + } + } + -+ return (si->boardtype); ++ return (si->sb.boardtype); +} + -+/* return board bus style */ ++/* return bus type of sbh device */ +uint -+sb_boardstyle(void *sbh) ++sb_bus(sb_t *sbh) +{ + sb_info_t *si; -+ uint16 w; + + si = SB_INFO(sbh); ++ return (si->sb.bustype); ++} + -+ if (si->bus == PCMCIA_BUS) -+ return (BOARDSTYLE_PCMCIA); -+ -+ if (si->bus == SB_BUS) -+ return (BOARDSTYLE_SOC); -+ -+ /* bus is PCI */ -+ -+ if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0) -+ return (BOARDSTYLE_CARDBUS); ++/* return bus core type */ ++uint ++sb_buscoretype(sb_t *sbh) ++{ ++ sb_info_t *si; + -+ if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) && -+ (w == 0x0313)) -+ return (BOARDSTYLE_CARDBUS); ++ si = SB_INFO(sbh); + -+ return (BOARDSTYLE_PCI); ++ return (si->sb.buscoretype); +} + -+/* return boolean if sbh device is in pci hostmode or client mode */ ++/* return bus core revision */ +uint -+sb_bus(void *sbh) ++sb_buscorerev(sb_t *sbh) +{ + sb_info_t *si; -+ + si = SB_INFO(sbh); -+ return (si->bus); ++ ++ return (si->sb.buscorerev); +} + +/* return list of found cores */ +uint -+sb_corelist(void *sbh, uint coreid[]) ++sb_corelist(sb_t *sbh, uint coreid[]) +{ + sb_info_t *si; + @@ -5100,7 +3969,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* return current register mapping */ +void * -+sb_coreregs(void *sbh) ++sb_coreregs(sb_t *sbh) +{ + sb_info_t *si; + @@ -5110,49 +3979,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + return (si->curmap); +} + -+/* Check if a target abort has happened and clear it */ -+bool -+sb_taclear(void *sbh) -+{ -+ sb_info_t *si; -+ bool rc = FALSE; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ if (si->bus == PCI_BUS) { -+ uint32 stcmd; -+ -+ stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd)); -+ rc = (stcmd & 0x08000000) != 0; -+ -+ if (rc) { -+ /* Target abort bit is set, clear it */ -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd); -+ } -+ } else if (si->bus == PCMCIA_BUS) { -+ rc = FALSE; -+ } -+ else if (si->bus == SDIO_BUS) { -+ /* due to 4317 A0 HW bug, sdio core wedged on target abort, -+ just clear SBSErr bit blindly */ -+ if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) { -+ SB_ERROR(("SDIO target abort, clean it")); -+ W_SBREG(sbh, &sb->sbtmstatehigh, 0); -+ } -+ rc = FALSE; -+ } -+ -+ return (rc); -+} + +/* do buffered registers update */ +void -+sb_commit(void *sbh) ++sb_commit(sb_t *sbh) +{ + sb_info_t *si; -+ sbpciregs_t *pciregs; + uint origidx; + uint intr_val = 0; + @@ -5162,12 +3994,22 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + ASSERT(GOODIDX(origidx)); + + INTR_OFF(si, intr_val); -+ /* switch over to pci core */ -+ pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0); + -+ /* do the buffer registers update */ -+ W_REG(&pciregs->bcastaddr, SB_COMMIT); -+ W_REG(&pciregs->bcastdata, 0x0); ++ /* switch over to chipcommon core if there is one, else use pci */ ++ if (si->sb.ccrev != NOREV) { ++ chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&ccregs->broadcastaddress, SB_COMMIT); ++ W_REG(&ccregs->broadcastdata, 0x0); ++ } else if (PCI(si)) { ++ sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&pciregs->bcastaddr, SB_COMMIT); ++ W_REG(&pciregs->bcastdata, 0x0); ++ } else ++ ASSERT(0); + + /* restore core index */ + sb_setcoreidx(sbh, origidx); @@ -5176,7 +4018,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* reset and re-enable a core */ +void -+sb_core_reset(void *sbh, uint32 bits) ++sb_core_reset(sb_t *sbh, uint32 bits) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -5196,69 +4038,135 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + */ + + /* set reset while enabling the clock and forcing them on throughout the core */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); -+ -+ if (sb_coreid(sbh) == SB_ILINE100) { -+ bcm_mdelay(50); -+ } else { -+ OSL_DELAY(1); -+ } ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); + -+ if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) { -+ W_SBREG(sbh, &sb->sbtmstatehigh, 0); ++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) { ++ W_SBREG(si, &sb->sbtmstatehigh, 0); + } -+ if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { -+ AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); ++ if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { ++ AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + } + + /* clear reset and allow it to propagate throughout the core */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); + OSL_DELAY(1); + + /* leave clock enabled */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); + OSL_DELAY(1); +} + +void -+sb_core_tofixup(void *sbh) ++sb_core_tofixup(sb_t *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + -+ if (si->pcirev >= 5) ++ if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || (PCI(si) && (si->sb.buscorerev >= 5)) ) + return; + + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + -+ if (si->bus == SB_BUS) { -+ SET_SBREG(sbh, &sb->sbimconfiglow, ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) { ++ SET_SBREG(si, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x5 << SBIMCL_RTO_SHIFT) | 0x3); + } else { + if (sb_coreid(sbh) == SB_PCI) { -+ SET_SBREG(sbh, &sb->sbimconfiglow, ++ SET_SBREG(si, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + } else { -+ SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); ++ SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); + } + } + + sb_commit(sbh); +} + ++/* ++ * Set the initiator timeout for the "master core". ++ * The master core is defined to be the core in control ++ * of the chip and so it issues accesses to non-memory ++ * locations (Because of dma *any* core can access memeory). ++ * ++ * The routine uses the bus to decide who is the master: ++ * SB_BUS => mips ++ * JTAG_BUS => chipc ++ * PCI_BUS => pci ++ * ++ * This routine exists so callers can disable initiator ++ * timeouts so accesses to very slow devices like otp ++ * won't cause an abort. The routine allows arbitrary ++ * settings of the service and request timeouts, though. ++ * ++ * Returns the timeout state before changing it or -1 ++ * on error. ++ */ ++ ++#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK) ++ ++uint32 ++sb_set_initiator_to(sb_t *sbh, uint32 to) ++{ ++ sb_info_t *si; ++ uint origidx, idx; ++ uint intr_val = 0; ++ uint32 tmp, ret = 0xffffffff; ++ sbconfig_t *sb; ++ ++ si = SB_INFO(sbh); ++ ++ if ((to & ~TO_MASK) != 0) ++ return ret; ++ ++ /* Figure out the master core */ ++ idx = BADIDX; ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ idx = si->sb.buscoreidx; ++ break; ++ case JTAG_BUS: ++ idx = SB_CC_IDX; ++ break; ++ case SB_BUS: ++ if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX) ++ idx = sb_findcoreidx(si, SB_MIPS, 0); ++ break; ++ default: ++ ASSERT(0); ++ } ++ if (idx == BADIDX) ++ return ret; ++ ++ INTR_OFF(si, intr_val); ++ origidx = sb_coreidx(sbh); ++ ++ sb = REGS2SB(sb_setcoreidx(sbh, idx)); ++ ++ tmp = R_SBREG(si, &sb->sbimconfiglow); ++ ret = tmp & TO_MASK; ++ W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to); ++ ++ sb_commit(sbh); ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return ret; ++} ++ +void -+sb_core_disable(void *sbh, uint32 bits) ++sb_core_disable(sb_t *sbh, uint32 bits) +{ + sb_info_t *si; + volatile uint32 dummy; ++ uint32 rej; + sbconfig_t *sb; + + si = SB_INFO(sbh); @@ -5266,83 +4174,72 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + -+ /* must return if core is already in reset */ -+ if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET) ++ /* if core is already in reset, just return */ ++ if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET) + return; + -+ /* put into reset and return if clocks are not enabled */ -+ if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0) -+ goto disable; ++ /* reject value changed between sonics 2.2 and 2.3 */ ++ if (si->sb.sonicsrev == SONICS_2_2) ++ rej = (1 << SBTML_REJ_SHIFT); ++ else ++ rej = (2 << SBTML_REJ_SHIFT); + -+ /* set the reject bit */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ)); ++ /* if clocks are not enabled, put into reset and return */ ++ if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0) ++ goto disable; + -+ /* spin until reject is set */ -+ while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0) -+ OSL_DELAY(1); ++ /* set target reject and spin until busy is clear (preserve core-specific bits) */ ++ OR_SBREG(si, &sb->sbtmstatelow, rej); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000); + -+ /* spin until sbtmstatehigh.busy is clear */ -+ while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY) ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) { ++ OR_SBREG(si, &sb->sbimstate, SBIM_RJ); ++ dummy = R_SBREG(si, &sb->sbimstate); + OSL_DELAY(1); ++ SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000); ++ } + + /* set reset and reject while enabling the clocks */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); + OSL_DELAY(10); + -+ disable: ++ /* don't forget to clear the initiator reject bit */ ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) ++ AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ); ++ ++disable: + /* leave reset and reject asserted */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET)); ++ W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET)); + OSL_DELAY(1); +} + ++/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +void -+sb_watchdog(void *sbh, uint ticks) ++sb_watchdog(sb_t *sbh, uint ticks) +{ + sb_info_t *si = SB_INFO(sbh); + + /* instant NMI */ + switch (si->gpioid) { + case SB_CC: -+ sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); ++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); + break; + case SB_EXTIF: -+ sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); ++ sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); + break; + } +} + -+/* initialize the pcmcia core */ -+void -+sb_pcmcia_init(void *sbh) -+{ -+ sb_info_t *si; -+ uint8 cor; -+ -+ si = SB_INFO(sbh); -+ -+ /* enable d11 mac interrupts */ -+ if (si->chip == BCM4301_DEVICE_ID) { -+ /* Have to use FCR2 in 4301 */ -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); -+ } else { -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ } -+ -+} -+ + +/* + * Configure the pci core for pci client (NIC) action -+ * and get appropriate dma offset value. + * coremask is the bitvec of cores by index to be enabled. + */ +void -+sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask) ++sb_pci_setup(sb_t *sbh, uint coremask) +{ + sb_info_t *si; + sbconfig_t *sb; @@ -5353,14 +4250,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + + si = SB_INFO(sbh); + -+ if (dmaoffset) -+ *dmaoffset = 0; -+ + /* if not pci bus, we're done */ -+ if (si->bus != PCI_BUS) ++ if (BUSTYPE(si->sb.bustype) != PCI_BUS) + return; + -+ ASSERT(si->pciidx); ++ ASSERT(PCI(si)); ++ ASSERT(si->sb.buscoreidx != BADIDX); + + /* get current core index */ + idx = si->curidx; @@ -5368,41 +4263,39 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + /* we interrupt on this backplane flag number */ + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); -+ sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK; + + /* switch over to pci core */ -+ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx); ++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx); + sb = REGS2SB(pciregs); + + /* + * Enable sb->pci interrupts. Assume + * PCI rev 2.3 support was added in pci core rev 6 and things changed.. + */ -+ if (si->pcirev < 6) { -+ /* set sbintvec bit for our flag number */ -+ OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag)); -+ } else { ++ if ((PCI(si) && ((si->sb.buscorerev) >= 6))) { + /* pci config write to set this core bit in PCIIntMask */ + w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); + w |= (coremask << PCI_SBIM_SHIFT); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); ++ } else { ++ /* set sbintvec bit for our flag number */ ++ OR_SBREG(si, &sb->sbintvec, (1 << sbflag)); + } + -+ /* enable prefetch and bursts for sonics-to-pci translation 2 */ -+ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); -+ -+ if (si->pcirev < 5) { -+ SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); -+ sb_commit(sbh); ++ if (PCI(si)) { ++ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); ++ if (si->sb.buscorerev >= 11) ++ OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI); ++ if (si->sb.buscorerev < 5) { ++ SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ sb_commit(sbh); ++ } + } + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); -+ -+ /* use large sb pci dma window */ -+ if (dmaoffset) -+ *dmaoffset = SB_PCI_DMA; +} + +uint32 @@ -5455,7 +4348,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* return the core-type instantiation # of the current core */ +uint -+sb_coreunit(void *sbh) ++sb_coreunit(sb_t *sbh) +{ + sb_info_t *si; + uint idx; @@ -5502,7 +4395,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + n1 = n & CN_N1_MASK; + n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; + -+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { ++ if (pll_type == PLL_TYPE6) { ++ if (m & CC_T6_MMASK) ++ return CC_T6_M1; ++ else ++ return CC_T6_M0; ++ } else if ((pll_type == PLL_TYPE1) || ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { + n1 = factor6(n1); + n2 += CC_F5_BIAS; + } else if (pll_type == PLL_TYPE2) { @@ -5510,12 +4411,17 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + n2 += CC_T2_BIAS; + ASSERT((n1 >= 2) && (n1 <= 7)); + ASSERT((n2 >= 5) && (n2 <= 23)); -+ } else if (pll_type == PLL_TYPE3) { ++ } else if (pll_type == PLL_TYPE5) { + return (100000000); + } else -+ ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4)); -+ -+ clock = CC_CLOCK_BASE * n1 * n2; ++ ASSERT(0); ++ /* PLL types 3 and 7 use BASE2 (25Mhz) */ ++ if ((pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE7)) { ++ clock = CC_CLOCK_BASE2 * n1 * n2; ++ } ++ else ++ clock = CC_CLOCK_BASE1 * n1 * n2; + + if (clock == 0) + return 0; @@ -5525,9 +4431,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; + mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; + -+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { ++ if ((pll_type == PLL_TYPE1) || ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { + m1 = factor6(m1); -+ if (pll_type == PLL_TYPE1) ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3)) + m2 += CC_F5_BIAS; + else + m2 = factor6(m2); @@ -5564,7 +4473,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* returns the current speed the SB is running at */ +uint32 -+sb_clock(void *sbh) ++sb_clock(sb_t *sbh) +{ + sb_info_t *si; + extifregs_t *eir; @@ -5587,14 +4496,35 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + n = R_REG(&cc->clockcontrol_n); -+ m = R_REG(&cc->clockcontrol_sb); ++ if (pll_type == PLL_TYPE6) ++ m = R_REG(&cc->clockcontrol_mips); ++ else if (pll_type == PLL_TYPE3) ++ { ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ m = R_REG(&cc->clockcontrol_sb); ++ else ++ m = R_REG(&cc->clockcontrol_m2); ++ } ++ else ++ m = R_REG(&cc->clockcontrol_sb); + } else { + INTR_RESTORE(si, intr_val); + return 0; + } + -+ /* calculate rate */ -+ rate = sb_clock_rate(pll_type, n, m); ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ { ++ rate = 100000000; ++ } ++ else ++ { ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ if (pll_type == PLL_TYPE3) ++ rate = rate / 2; ++ } + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); @@ -5606,7 +4536,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* change logical "focus" to the gpio core for optimized access */ +void* -+sb_gpiosetcore(void *sbh) ++sb_gpiosetcore(sb_t *sbh) +{ + sb_info_t *si; + @@ -5617,7 +4547,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + +/* mask&set gpiocontrol bits */ +uint32 -+sb_gpiocontrol(void *sbh, uint32 mask, uint32 val) ++sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ + sb_info_t *si; + uint regoff; @@ -5625,6 +4555,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + regoff = 0; + ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiocontrol); @@ -5638,12 +4577,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + return (0); + } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio output enable bits */ +uint32 -+sb_gpioouten(void *sbh, uint32 mask, uint32 val) ++sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ + sb_info_t *si; + uint regoff; @@ -5651,6 +4590,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + regoff = 0; + ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioouten); @@ -5665,12 +4613,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + break; + } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio output bits */ +uint32 -+sb_gpioout(void *sbh, uint32 mask, uint32 val) ++sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ + sb_info_t *si; + uint regoff; @@ -5678,6 +4626,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + regoff = 0; + ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioout); @@ -5692,12 +4649,78 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + break; + } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* reserve one gpio */ ++uint32 ++sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ ++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); ++ return -1; ++ } ++ /* make sure only one bit is set */ ++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { ++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); ++ return -1; ++ } ++ ++ /* already reserved */ ++ if (sb_gpioreservation & gpio_bitmask) ++ return -1; ++ /* set reservation */ ++ sb_gpioreservation |= gpio_bitmask; ++ ++ return sb_gpioreservation; ++} ++ ++/* release one gpio */ ++/* ++ * releasing the gpio doesn't change the current value on the GPIO last write value ++ * persists till some one overwrites it ++*/ ++ ++uint32 ++sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ ++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); ++ return -1; ++ } ++ /* make sure only one bit is set */ ++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { ++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); ++ return -1; ++ } ++ ++ /* already released */ ++ if (!(sb_gpioreservation & gpio_bitmask)) ++ return -1; ++ ++ /* clear reservation */ ++ sb_gpioreservation &= ~gpio_bitmask; ++ ++ return sb_gpioreservation; +} + +/* return the current gpioin register value */ +uint32 -+sb_gpioin(void *sbh) ++sb_gpioin(sb_t *sbh) +{ + sb_info_t *si; + uint regoff; @@ -5719,12 +4742,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + break; + } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0)); ++ return (sb_corereg(si, si->gpioidx, regoff, 0, 0)); +} + +/* mask&set gpio interrupt polarity bits */ +uint32 -+sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val) ++sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ + sb_info_t *si; + uint regoff; @@ -5732,6 +4755,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + regoff = 0; + ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiointpolarity); @@ -5747,12 +4779,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + break; + } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio interrupt mask bits */ +uint32 -+sb_gpiointmask(void *sbh, uint32 mask, uint32 val) ++sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ + sb_info_t *si; + uint regoff; @@ -5760,6 +4792,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si = SB_INFO(sbh); + regoff = 0; + ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ ++ ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } ++ + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiointmask); @@ -5775,71 +4816,180 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + break; + } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); -+} ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* assign the gpio to an led */ ++uint32 ++sb_gpioled(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ if (si->sb.ccrev < 16) ++ return -1; ++ ++ /* gpio led powersave reg */ ++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val)); ++} ++ ++/* mask&set gpio timer val */ ++uint32 ++sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval) ++{ ++ sb_info_t *si; ++ si = SB_INFO(sbh); ++ ++ if (si->sb.ccrev < 16) ++ return -1; ++ ++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval)); ++} ++ ++ ++/* return the slow clock source - LPO, XTAL, or PCI */ ++static uint ++sb_slowclk_src(sb_info_t *si) ++{ ++ chipcregs_t *cc; ++ + ++ ASSERT(sb_coreid(&si->sb) == SB_CC); + -+/* -+ * Return the slowclock min or max frequency. -+ * Three sources of SLOW CLOCK: -+ * 1. On Chip LPO - 32khz or 160khz -+ * 2. On Chip Xtal OSC - 20mhz/4*(divider+1) -+ * 3. External PCI clock - 66mhz/4*(divider+1) -+ */ ++ if (si->sb.ccrev < 6) { ++ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) ++ && (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS)) ++ return (SCC_SS_PCI); ++ else ++ return (SCC_SS_XTAL); ++ } else if (si->sb.ccrev < 10) { ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); ++ return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK); ++ } else /* Insta-clock */ ++ return (SCC_SS_XTAL); ++} ++ ++/* return the ILP (slowclock) min or max frequency */ +static uint -+slowfreq(void *sbh, bool max) ++sb_slowclk_freq(sb_info_t *si, bool max) +{ -+ sb_info_t *si; + chipcregs_t *cc; -+ uint32 v; ++ uint32 slowclk; + uint div; + -+ si = SB_INFO(sbh); + -+ ASSERT(sb_coreid(sbh) == SB_CC); ++ ASSERT(sb_coreid(&si->sb) == SB_CC); + -+ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); + -+ /* shouldn't be here unless we've established the chip has dynamic power control */ ++ /* shouldn't be here unless we've established the chip has dynamic clk control */ + ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); + -+ if (si->ccrev < 6) { -+ v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); -+ -+ if (v & PCI_CFG_GPIO_SCS) ++ slowclk = sb_slowclk_src(si); ++ if (si->sb.ccrev < 6) { ++ if (slowclk == SCC_SS_PCI) + return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); + else + return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); -+ } else { -+ v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK; -+ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); -+ if (v == SCC_SS_LPO) ++ } else if (si->sb.ccrev < 10) { ++ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ if (slowclk == SCC_SS_LPO) + return (max? LPOMAXFREQ : LPOMINFREQ); -+ else if (v == SCC_SS_XTAL) ++ else if (slowclk == SCC_SS_XTAL) + return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); -+ else if (v == SCC_SS_PCI) ++ else if (slowclk == SCC_SS_PCI) + return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); + else + ASSERT(0); ++ } else { ++ /* Chipc rev 10 is InstaClock */ ++ div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT; ++ div = 4 * (div + 1); ++ return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); + } + return (0); +} + ++static void ++sb_clkctl_setdelay(sb_info_t *si, void *chipcregs) ++{ ++ chipcregs_t * cc; ++ uint slowmaxfreq, pll_delay, slowclk; ++ uint pll_on_delay, fref_sel_delay; ++ ++ pll_delay = PLL_DELAY; ++ ++ /* If the slow clock is not sourced by the xtal then add the xtal_on_delay ++ * since the xtal will also be powered down by dynamic clk control logic. ++ */ ++ slowclk = sb_slowclk_src(si); ++ if (slowclk != SCC_SS_XTAL) ++ pll_delay += XTAL_ON_DELAY; ++ ++ /* Starting with 4318 it is ILP that is used for the delays */ ++ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE); ++ ++ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; ++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; ++ ++ cc = (chipcregs_t *)chipcregs; ++ W_REG(&cc->pll_on_delay, pll_on_delay); ++ W_REG(&cc->fref_sel_delay, fref_sel_delay); ++} ++ ++int ++sb_pwrctl_slowclk(void *sbh, bool set, uint *div) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint intr_val = 0; ++ uint err = 0; ++ ++ si = SB_INFO(sbh); ++ ++ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ ++ if (si->sb.ccrev < 6) ++ return 1; ++ ++ /* chipcommon cores rev10 are a whole new ball game */ ++ if (si->sb.ccrev >= 10) ++ return 1; ++ ++ if (set && ((*div % 4) || (*div < 4))) ++ return 2; ++ ++ INTR_OFF(si, intr_val); ++ origidx = si->curidx; ++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); ++ ASSERT(cc != NULL); ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) { ++ err = 3; ++ goto done; ++ } ++ ++ if (set) { ++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT)); ++ sb_clkctl_setdelay(sbh, (void *)cc); ++ } else ++ *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return err; ++} ++ +/* initialize power control delay registers */ -+void -+sb_pwrctl_init(void *sbh) ++void sb_clkctl_init(sb_t *sbh) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; -+ uint slowmaxfreq; -+ uint pll_on_delay, fref_sel_delay; + + si = SB_INFO(sbh); + -+ if (si->bus == SB_BUS) -+ return; -+ + origidx = si->curidx; + + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) @@ -5848,24 +4998,22 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + -+ slowmaxfreq = slowfreq(sbh, TRUE); -+ pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000; -+ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; -+ -+ W_REG(&cc->pll_on_delay, pll_on_delay); -+ W_REG(&cc->fref_sel_delay, fref_sel_delay); -+ -+ /* 4317pc does not work with SlowClock less than 5Mhz */ -+ if (si->bus == PCMCIA_BUS) -+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF)); ++ /* set all Instaclk chip ILP to 1 MHz */ ++ if (si->sb.ccrev >= 10) ++ SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ++ ++ sb_clkctl_setdelay(si, (void *)cc); + +done: + sb_setcoreidx(sbh, origidx); +} -+ ++void sb_pwrctl_init(sb_t *sbh) ++{ ++sb_clkctl_init(sbh); ++} +/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ +uint16 -+sb_pwrctl_fast_pwrup_delay(void *sbh) ++sb_clkctl_fast_pwrup_delay(sb_t *sbh) +{ + sb_info_t *si; + uint origidx; @@ -5878,9 +5026,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + fpdelay = 0; + origidx = si->curidx; + -+ if (si->bus == SB_BUS) -+ goto done; -+ + INTR_OFF(si, intr_val); + + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) @@ -5889,7 +5034,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + -+ slowminfreq = slowfreq(sbh, FALSE); ++ slowminfreq = sb_slowclk_freq(si, FALSE); + fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; + +done: @@ -5897,73 +5042,81 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + INTR_RESTORE(si, intr_val); + return (fpdelay); +} -+ ++uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh) ++{ ++return sb_clkctl_fast_pwrup_delay(sbh); ++} +/* turn primary xtal and/or pll off/on */ +int -+sb_pwrctl_xtal(void *sbh, uint what, bool on) ++sb_clkctl_xtal(sb_t *sbh, uint what, bool on) +{ + sb_info_t *si; + uint32 in, out, outen; + + si = SB_INFO(sbh); + ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: + -+ if (si->bus == PCMCIA_BUS) { -+ return (0); -+ } -+ -+ if (si->bus != PCI_BUS) -+ return (-1); -+ -+ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); -+ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); -+ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); -+ -+ /* -+ * We can't actually read the state of the PLLPD so we infer it -+ * by the value of XTAL_PU which *is* readable via gpioin. -+ */ -+ if (on && (in & PCI_CFG_GPIO_XTAL)) -+ return (0); ++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); ++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); ++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); + -+ if (what & XTAL) -+ outen |= PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ outen |= PCI_CFG_GPIO_PLL; ++ /* ++ * Avoid glitching the clock if GPRS is already using it. ++ * We can't actually read the state of the PLLPD so we infer it ++ * by the value of XTAL_PU which *is* readable via gpioin. ++ */ ++ if (on && (in & PCI_CFG_GPIO_XTAL)) ++ return (0); + -+ if (on) { -+ /* turn primary xtal on */ -+ if (what & XTAL) { -+ out |= PCI_CFG_GPIO_XTAL; ++ if (what & XTAL) ++ outen |= PCI_CFG_GPIO_XTAL; + if (what & PLL) -+ out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); -+ OSL_DELAY(200); -+ } ++ outen |= PCI_CFG_GPIO_PLL; ++ ++ if (on) { ++ /* turn primary xtal on */ ++ if (what & XTAL) { ++ out |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ OSL_DELAY(XTAL_ON_DELAY); ++ } + -+ /* turn pll on */ -+ if (what & PLL) { -+ out &= ~PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_DELAY(2000); -+ } -+ } else { -+ if (what & XTAL) -+ out &= ~PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ /* turn pll on */ ++ if (what & PLL) { ++ out &= ~PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_DELAY(2000); ++ } ++ } else { ++ if (what & XTAL) ++ out &= ~PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ } ++ ++ default: ++ return (-1); + } + + return (0); +} + -+/* set dynamic power control mode (forceslow, forcefast, dynamic) */ ++int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on) ++{ ++return sb_clkctl_xtal(sbh,what,on); ++} ++ ++/* set dynamic clk control mode (forceslow, forcefast, dynamic) */ +/* returns true if ignore pll off is set and false if it is not */ +bool -+sb_pwrctl_clk(void *sbh, uint mode) ++sb_clkctl_clk(sb_t *sbh, uint mode) +{ + sb_info_t *si; + uint origidx; @@ -5974,8 +5127,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + + si = SB_INFO(sbh); + -+ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ -+ if (si->ccrev < 6) ++ /* chipcommon cores prior to rev6 don't support dynamic clock control */ ++ if (si->sb.ccrev < 6) ++ return (FALSE); ++ ++ /* chipcommon cores rev10 are a whole new ball game */ ++ if (si->sb.ccrev >= 10) + return (FALSE); + + INTR_OFF(si, intr_val); @@ -5991,20 +5148,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + switch (mode) { + case CLK_FAST: /* force fast (pll) clock */ + /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ -+ sb_pwrctl_xtal(sbh, XTAL, ON); ++ sb_clkctl_xtal(&si->sb, XTAL, ON); + + SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); + break; + -+ case CLK_SLOW: /* force slow clock */ -+ if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS)) -+ return (-1); -+ -+ if (si->ccrev >= 6) -+ OR_REG(&cc->slow_clk_ctl, SCC_FS); -+ break; -+ -+ case CLK_DYNAMIC: /* enable dynamic power control */ ++ case CLK_DYNAMIC: /* enable dynamic clock control */ + scc = R_REG(&cc->slow_clk_ctl); + scc &= ~(SCC_FS | SCC_IP | SCC_XC); + if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) @@ -6013,10 +5162,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + + /* for dynamic control, we have to release our xtal_pu "force on" */ + if (scc & SCC_XC) -+ sb_pwrctl_xtal(sbh, XTAL, OFF); ++ sb_clkctl_xtal(&si->sb, XTAL, OFF); + break; ++ ++ default: ++ ASSERT(0); + } -+ ++ + /* Is the h/w forcing the use of the fast clk */ + forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); + @@ -6026,9 +5178,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + return (forcefastclk); +} + ++bool sb_pwrctl_clk(sb_t *sbh, uint mode) ++{ ++return sb_clkctl_clk(sbh, mode); ++} +/* register driver interrupt disabling and restoring callback functions */ +void -+sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg) ++sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg) +{ + sb_info_t *si; + @@ -6036,6 +5192,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br + si->intr_arg = intr_arg; + si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; + si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; ++ si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn; + /* save current core id. when this function called, the current core + * must be the core which provides driver functions(il, et, wl, etc.) + */ @@ -6043,115 +5200,608 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-br +} + + -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h 2005-08-28 11:12:20.430859152 +0200 -@@ -0,0 +1,90 @@ ++void ++sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif) ++{ ++ uint vendor, core, unit; ++ uint chip, chippkg; ++ char varname[8]; ++ uint8 class, subclass, progif; ++ ++ vendor = sb_corevendor(sbh); ++ core = sb_coreid(sbh); ++ unit = sb_coreunit(sbh); ++ ++ chip = BCMINIT(sb_chip)(sbh); ++ chippkg = BCMINIT(sb_chippkg)(sbh); ++ ++ progif = 0; ++ ++ /* Known vendor translations */ ++ switch (vendor) { ++ case SB_VEND_BCM: ++ vendor = VENDOR_BROADCOM; ++ break; ++ } ++ ++ /* Determine class based on known core codes */ ++ switch (core) { ++ case SB_ILINE20: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ILINE_ID; ++ break; ++ case SB_ENET: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ENET_ID; ++ break; ++ case SB_SDRAM: ++ case SB_MEMC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_RAM; ++ break; ++ case SB_PCI: ++ class = PCI_CLASS_BRIDGE; ++ subclass = PCI_BRIDGE_PCI; ++ break; ++ case SB_MIPS: ++ case SB_MIPS33: ++ class = PCI_CLASS_CPU; ++ subclass = PCI_CPU_MIPS; ++ break; ++ case SB_CODEC: ++ class = PCI_CLASS_COMM; ++ subclass = PCI_COMM_MODEM; ++ core = BCM47XX_V90_ID; ++ break; ++ case SB_USB: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USB_ID; ++ break; ++ case SB_USB11H: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USBH_ID; ++ break; ++ case SB_USB11D: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ core = BCM47XX_USBD_ID; ++ break; ++ case SB_IPSEC: ++ class = PCI_CLASS_CRYPT; ++ subclass = PCI_CRYPT_NETWORK; ++ core = BCM47XX_IPSEC_ID; ++ break; ++ case SB_ROBO: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ core = BCM47XX_ROBO_ID; ++ break; ++ case SB_EXTIF: ++ case SB_CC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_FLASH; ++ break; ++ case SB_D11: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ /* Let an nvram variable override this */ ++ sprintf(varname, "wl%did", unit); ++ if ((core = getintvar(NULL, varname)) == 0) { ++ if (chip == BCM4712_DEVICE_ID) { ++ if (chippkg == BCM4712SMALL_PKG_ID) ++ core = BCM4306_D11G_ID; ++ else ++ core = BCM4306_D11DUAL_ID; ++ } ++ } ++ break; ++ ++ default: ++ class = subclass = progif = 0xff; ++ break; ++ } ++ ++ *pcivendor = (uint16)vendor; ++ *pcidevice = (uint16)core; ++ *pciclass = class; ++ *pcisubclass = subclass; ++ *pciprogif = progif; ++} ++ ++/* Fix chip's configuration. The current core may be changed upon return */ ++static int ++sb_pci_fixcfg(sb_info_t *si) ++{ ++ uint origidx, pciidx; ++ sbpciregs_t *pciregs; ++ uint16 val16, *reg16; ++ ++ ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS); ++ ++ /* Fix PCI(e) SROM shadow area */ ++ /* save the current index */ ++ origidx = sb_coreidx(&si->sb); ++ ++ if (si->sb.buscoretype == SB_PCI) { ++ pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0); ++ ASSERT(pciregs); ++ reg16 = &pciregs->sprom[SRSH_PI_OFFSET]; ++ } ++ else { ++ ASSERT(0); ++ return -1; ++ } ++ pciidx = sb_coreidx(&si->sb); ++ val16 = R_REG(reg16); ++ if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) { ++ val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK); ++ W_REG(reg16, val16); ++ } ++ ++ /* restore the original index */ ++ sb_setcoreidx(&si->sb, origidx); ++ ++ return 0; ++} ++ ++EXPORT_SYMBOL(sb_boardtype); ++EXPORT_SYMBOL(sb_boardvendor); ++EXPORT_SYMBOL(sb_gpiocontrol); ++EXPORT_SYMBOL(sb_gpioin); ++EXPORT_SYMBOL(sb_gpiointmask); ++EXPORT_SYMBOL(sb_gpiointpolarity); ++EXPORT_SYMBOL(sb_gpioled); ++EXPORT_SYMBOL(sb_gpioout); ++EXPORT_SYMBOL(sb_gpioouten); ++EXPORT_SYMBOL(sb_gpiorelease); ++EXPORT_SYMBOL(sb_gpioreserve); ++EXPORT_SYMBOL(sb_gpiosetcore); ++EXPORT_SYMBOL(sb_gpiotimerval); ++EXPORT_SYMBOL(sb_watchdog); +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sflash.c linux.dev/arch/mips/bcm947xx/broadcom/sflash.c +--- linux.old/arch/mips/bcm947xx/broadcom/sflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sflash.c 2005-12-15 16:59:20.045933750 +0100 +@@ -0,0 +1,418 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Private global state */ ++static struct sflash sflash; ++ ++/* Issue a serial flash command */ ++static INLINE void ++sflash_cmd(chipcregs_t *cc, uint opcode) ++{ ++ W_REG(&cc->flashcontrol, SFLASH_START | opcode); ++ while (R_REG(&cc->flashcontrol) & SFLASH_BUSY); ++} ++ ++/* Initialize serial flash access */ ++struct sflash * ++sflash_init(chipcregs_t *cc) ++{ ++ uint32 id, id2; ++ ++ bzero(&sflash, sizeof(sflash)); ++ ++ sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK; ++ ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Probe for ST chips */ ++ sflash_cmd(cc, SFLASH_ST_DP); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id = R_REG(&cc->flashdata); ++ switch (id) { ++ case 0x11: ++ /* ST M25P20 2 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 4; ++ break; ++ case 0x12: ++ /* ST M25P40 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ break; ++ case 0x13: ++ /* ST M25P80 8 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 16; ++ break; ++ case 0x14: ++ /* ST M25P16 16 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 32; ++ break; ++ case 0x15: ++ /* ST M25P32 32 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 64; ++ break; ++ case 0xbf: ++ W_REG(&cc->flashaddress, 1); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id2 = R_REG(&cc->flashdata); ++ if (id2 == 0x44) { ++ /* SST M25VF80 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ } ++ break; ++ } ++ break; ++ ++ case SFLASH_AT: ++ /* Probe for Atmel chips */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ id = R_REG(&cc->flashdata) & 0x3c; ++ switch (id) { ++ case 0xc: ++ /* Atmel AT45DB011 1Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 512; ++ break; ++ case 0x14: ++ /* Atmel AT45DB021 2Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 1024; ++ break; ++ case 0x1c: ++ /* Atmel AT45DB041 4Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 2048; ++ break; ++ case 0x24: ++ /* Atmel AT45DB081 8Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 4096; ++ break; ++ case 0x2c: ++ /* Atmel AT45DB161 16Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 4096; ++ break; ++ case 0x34: ++ /* Atmel AT45DB321 32Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 8192; ++ break; ++ case 0x3c: ++ /* Atmel AT45DB642 64Mbit Serial Flash */ ++ sflash.blocksize = 1024; ++ sflash.numblocks = 8192; ++ break; ++ } ++ break; ++ } ++ ++ sflash.size = sflash.blocksize * sflash.numblocks; ++ return sflash.size ? &sflash : NULL; ++} ++ ++/* Read len bytes starting at offset into buf. Returns number of bytes read. */ ++int ++sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) ++{ ++ int cnt; ++ uint32 *from, *to; ++ ++ if (!len) ++ return 0; ++ ++ if ((offset + len) > sflash.size) ++ return -22; ++ ++ if ((len >= 4) && (offset & 3)) ++ cnt = 4 - (offset & 3); ++ else if ((len >= 4) && ((uint32)buf & 3)) ++ cnt = 4 - ((uint32)buf & 3); ++ else ++ cnt = len; ++ ++ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset); ++ to = (uint32 *)buf; ++ ++ if (cnt < 4) { ++ bcopy(from, to, cnt); ++ return cnt; ++ } ++ ++ while (cnt >= 4) { ++ *to++ = *from++; ++ cnt -= 4; ++ } ++ ++ return (len - cnt); ++} ++ ++/* Poll for command completion. Returns zero when complete. */ ++int ++sflash_poll(chipcregs_t *cc, uint offset) ++{ ++ if (offset >= sflash.size) ++ return -22; ++ ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Check for ST Write In Progress bit */ ++ sflash_cmd(cc, SFLASH_ST_RDSR); ++ return R_REG(&cc->flashdata) & SFLASH_ST_WIP; ++ case SFLASH_AT: ++ /* Check for Atmel Ready bit */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ return !(R_REG(&cc->flashdata) & SFLASH_AT_READY); ++ } ++ ++ return 0; ++} ++ ++/* Write len bytes starting at offset into buf. Returns number of bytes ++ * written. Caller should poll for completion. ++ */ ++int ++sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++{ ++ struct sflash *sfl; ++ int ret = 0; ++ bool is4712b0; ++ uint32 page, byte, mask; ++ ++ if (!len) ++ return 0; ++ ++ if ((offset + len) > sflash.size) ++ return -22; ++ ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ mask = R_REG(&cc->chipid); ++ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT))); ++ /* Enable writes */ ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ if (is4712b0) { ++ mask = 1 << 14; ++ W_REG(&cc->flashaddress, offset); ++ W_REG(&cc->flashdata, *buf++); ++ /* Set chip select */ ++ OR_REG(&cc->gpioout, mask); ++ /* Issue a page program with the first byte */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ ret = 1; ++ offset++; ++ len--; ++ while (len > 0) { ++ if ((offset & 255) == 0) { ++ /* Page boundary, drop cs and return */ ++ AND_REG(&cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -11; ++ } ++ return ret; ++ } else { ++ /* Write single byte */ ++ sflash_cmd(cc, *buf++); ++ } ++ ret++; ++ offset++; ++ len--; ++ } ++ /* All done, drop cs if needed */ ++ if ((offset & 255) != 1) { ++ /* Drop cs */ ++ AND_REG(&cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -12; ++ } ++ } ++ } else { ++ ret = 1; ++ W_REG(&cc->flashaddress, offset); ++ W_REG(&cc->flashdata, *buf); ++ /* Page program */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ } ++ break; ++ case SFLASH_AT: ++ mask = sfl->blocksize - 1; ++ page = (offset & ~mask) << 1; ++ byte = offset & mask; ++ /* Read main memory page into buffer 1 */ ++ if (byte || len < sfl->blocksize) { ++ W_REG(&cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); ++ /* 250 us for AT45DB321B */ ++ SPINWAIT(sflash_poll(cc, offset), 1000); ++ ASSERT(!sflash_poll(cc, offset)); ++ } ++ /* Write into buffer 1 */ ++ for (ret = 0; ret < len && byte < sfl->blocksize; ret++) { ++ W_REG(&cc->flashaddress, byte++); ++ W_REG(&cc->flashdata, *buf++); ++ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); ++ } ++ /* Write buffer 1 into main memory page */ ++ W_REG(&cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); ++ break; ++ } ++ ++ return ret; ++} ++ ++/* Erase a region. Returns number of bytes scheduled for erasure. ++ * Caller should poll for completion. ++ */ ++int ++sflash_erase(chipcregs_t *cc, uint offset) ++{ ++ struct sflash *sfl; ++ ++ if (offset >= sflash.size) ++ return -22; ++ ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ W_REG(&cc->flashaddress, offset); ++ sflash_cmd(cc, SFLASH_ST_SE); ++ return sfl->blocksize; ++ case SFLASH_AT: ++ W_REG(&cc->flashaddress, offset << 1); ++ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); ++ return sfl->blocksize; ++ } ++ ++ return 0; ++} ++ +/* -+ * BCM4710 address space map and definitions -+ * Think twice before adding to this file, this is not the kitchen sink -+ * These definitions are not guaranteed for all 47xx chips, only the 4710 -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * writes the appropriate range of flash, a NULL buf simply erases ++ * the region of flash + */ ++int ++sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++{ ++ struct sflash *sfl; ++ uchar *block = NULL, *cur_ptr, *blk_ptr; ++ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; ++ uint blk_offset, blk_len, copied; ++ int bytes, ret = 0; + -+#ifndef _bcm4710_h_ -+#define _bcm4710_h_ ++ /* Check address range */ ++ if (len <= 0) ++ return 0; + -+/* Address map */ -+#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ -+#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ -+#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ ++ sfl = &sflash; ++ if ((offset + len) > sfl->size) ++ return -1; + -+/* Core register space */ -+#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ -+#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ -+#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ -+#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ -+#define BCM4710_REG_USB 0x18004000 /* USB core registers */ -+#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ -+#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ -+#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ -+#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ -+ -+#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ -+#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ -+#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ -+#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ -+#define BCM4710_PROG 0x1f800000 /* Programable interface */ -+#define BCM4710_FLASH 0x1fc00000 /* Flash */ -+ -+#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) -+ -+#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) -+#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++ blocksize = sfl->blocksize; ++ mask = blocksize - 1; + -+#define SBFLAG_PCI 0 -+#define SBFLAG_ENET0 1 -+#define SBFLAG_ILINE20 2 -+#define SBFLAG_CODEC 3 -+#define SBFLAG_USB 4 -+#define SBFLAG_EXTIF 5 -+#define SBFLAG_ENET1 6 ++ /* Allocate a block of mem */ ++ if (!(block = MALLOC(NULL, blocksize))) ++ return -1; + -+#ifdef CONFIG_HWSIM -+#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0) -+#else -+#define BCM4710_TRACE(trval) -+#endif ++ while (len) { ++ /* Align offset */ ++ cur_offset = offset & ~mask; ++ cur_length = blocksize; ++ cur_ptr = block; + ++ remainder = blocksize - (offset & mask); ++ if (len < remainder) ++ cur_retlen = len; ++ else ++ cur_retlen = remainder; ++ ++ /* buf == NULL means erase only */ ++ if (buf) { ++ /* Copy existing data into holding block if necessary */ ++ if ((offset & mask) || (len < blocksize)) { ++ blk_offset = cur_offset; ++ blk_len = cur_length; ++ blk_ptr = cur_ptr; ++ ++ /* Copy entire block */ ++ while(blk_len) { ++ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); ++ blk_offset += copied; ++ blk_len -= copied; ++ blk_ptr += copied; ++ } ++ } + -+/* BCM94702 CPCI -ExtIF used for LocalBus devs */ ++ /* Copy input data into holding block */ ++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); ++ } + -+#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF -+#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000) -+#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000) -+#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR -+#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000) -+#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000) -+#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ -+#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0) ++ /* Erase block */ ++ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) ++ goto done; ++ while (sflash_poll(cc, (uint) cur_offset)); + -+#define LED_REG(x) \ -+ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x))) ++ /* buf == NULL means erase only */ ++ if (!buf) { ++ offset += cur_retlen; ++ len -= cur_retlen; ++ continue; ++ } + -+/* -+ * Reset function implemented in PLD. Read or write should trigger hard reset -+ */ -+#define SYS_HARD_RESET() \ -+ { for (;;) \ -+ *( (volatile unsigned char *)\ -+ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \ -+ } ++ /* Write holding block */ ++ while (cur_length > 0) { ++ if ((bytes = sflash_write(cc, ++ (uint) cur_offset, ++ (uint) cur_length, ++ (uchar *) cur_ptr)) < 0) { ++ ret = bytes; ++ goto done; ++ } ++ while (sflash_poll(cc, (uint) cur_offset)); ++ cur_offset += bytes; ++ cur_length -= bytes; ++ cur_ptr += bytes; ++ } ++ ++ offset += cur_retlen; ++ len -= cur_retlen; ++ buf += cur_retlen; ++ } + -+#endif /* _bcm4710_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h 2005-08-28 11:12:20.431859000 +0200 -@@ -0,0 +1,238 @@ ++ ret = len; ++done: ++ if (block) ++ MFREE(NULL, block, blocksize); ++ return ret; ++} ++ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h +--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2005-12-15 15:25:24.905340500 +0100 +@@ -0,0 +1,391 @@ +/* + * Broadcom device-specific manifest constants. + * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ + */ + +#ifndef _BCMDEVS_H @@ -6193,6 +5843,9 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc +#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ +#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ +#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ ++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ ++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ + +#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ + @@ -6206,6 +5859,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc +#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ +#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ +#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ + +#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ +#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ @@ -6234,19 +5888,68 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc +#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ +#define BCM4310_USB_ID 0x4315 /* 4310 usb */ + ++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ ++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ ++ ++ +#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ +#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ + +#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ + ++#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */ ++#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */ ++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */ ++#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */ ++ ++#define FPGA_JTAGM_ID 0x4330 /* ??? */ ++ ++/* Address map */ ++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ ++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ ++ ++/* Core register space */ ++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ ++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ ++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ ++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ ++#define BCM4710_REG_USB 0x18004000 /* USB core registers */ ++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ ++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ ++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ ++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ ++ ++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ ++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ ++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ ++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ ++#define BCM4710_PROG 0x1f800000 /* Programable interface */ ++#define BCM4710_FLASH 0x1fc00000 /* Flash */ ++ ++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) ++ ++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) ++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++ +#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ +#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ ++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ +#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ + +#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ + +#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ ++#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */ ++#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */ + ++#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */ + +/* PCMCIA vendor Id's */ + @@ -6260,13 +5963,22 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc +#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ +#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ +#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ -+#define BFL_ENETSPI 0x0010 /* This board has ephy roboswitch spi */ ++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ +#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ +#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ -+#define BFL_ENETVLAN 0x0100 /* This board can do vlan */ ++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ ++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ ++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ ++#define BFL_FEM 0x0800 /* This board supports the Front End Module */ ++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ ++#define BFL_HGPA 0x2000 /* This board has a high gain PA */ ++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ ++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ + +/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ +#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ ++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ ++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ +#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ +#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ +#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ @@ -6280,6 +5992,20 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc +#define PCI_BUS 1 /* PCI target */ +#define PCMCIA_BUS 2 /* PCMCIA target */ +#define SDIO_BUS 3 /* SDIO target */ ++#define JTAG_BUS 4 /* JTAG */ ++ ++/* Allows optimization for single-bus support */ ++#ifdef BCMBUSTYPE ++#define BUSTYPE(bus) (BCMBUSTYPE) ++#else ++#define BUSTYPE(bus) (bus) ++#endif ++ ++/* power control defines */ ++#define PLL_DELAY 150 /* us pll on delay */ ++#define FREF_DELAY 200 /* us fref change delay */ ++#define MIN_SLOW_CLK 32 /* us Slow clock period */ ++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ + +/* Reference Board Types */ + @@ -6370,30 +6096,109 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc +#define BCM94317SDIO_BOARD 0x0443 + +#define BU4712_BOARD 0x0444 ++#define BU4712SD_BOARD 0x045d ++#define BU4712L_BOARD 0x045f + +/* BCM4712 boards */ -+#define BCM94712AGR_BOARD 0x0445 -+#define BCM94712AP_BOARD 0x0446 ++#define BCM94712AP_BOARD 0x0445 ++#define BCM94712P_BOARD 0x0446 ++ ++/* BCM4318 boards */ ++#define BU4318_BOARD 0x0447 ++#define CB4318_BOARD 0x0448 ++#define MPG4318_BOARD 0x0449 ++#define MP4318_BOARD 0x044a ++#define SD4318_BOARD 0x044b ++ ++/* BCM63XX boards */ ++#define BCM96338_BOARD 0x6338 ++#define BCM96345_BOARD 0x6345 ++#define BCM96348_BOARD 0x6348 ++ ++/* Another mp4306 with SiGe */ ++#define BCM94306P_BOARD 0x044c ++ ++/* CF-like 4317 modules */ ++#define BCM94317CF_BOARD 0x044d ++ ++/* mp4303 */ ++#define BCM94303MP_BOARD 0x044e ++ ++/* mpsgh4306 */ ++#define BCM94306MPSGH_BOARD 0x044f ++ ++/* BRCM 4306 w/ Front End Modules */ ++#define BCM94306MPM 0x0450 ++#define BCM94306MPL 0x0453 ++ ++/* 4712agr */ ++#define BCM94712AGR_BOARD 0x0451 ++ ++/* The real CF 4317 board */ ++#define CFI4317_BOARD 0x0452 ++ ++/* pcmcia 4303 */ ++#define PC4303_BOARD 0x0454 ++ ++/* 5350K */ ++#define BCM95350K_BOARD 0x0455 ++ ++/* 5350R */ ++#define BCM95350R_BOARD 0x0456 + -+/* BCM4702 boards */ -+#define CT4702AP_BOARD 0x0447 ++/* 4306mplna */ ++#define BCM94306MPLNA_BOARD 0x0457 ++ ++/* 4320 boards */ ++#define BU4320_BOARD 0x0458 ++#define BU4320S_BOARD 0x0459 ++#define BCM94320PH_BOARD 0x045a ++ ++/* 4306mph */ ++#define BCM94306MPH_BOARD 0x045b ++ ++/* 4306pciv */ ++#define BCM94306PCIV_BOARD 0x045c ++ ++#define BU4712SD_BOARD 0x045d ++ ++#define BCM94320PFLSH_BOARD 0x045e ++ ++#define BU4712L_BOARD 0x045f ++#define BCM94712LGR_BOARD 0x0460 ++#define BCM94320R_BOARD 0x0461 ++ ++#define BU5352_BOARD 0x0462 ++ ++#define BCM94318MPGH_BOARD 0x0463 ++ ++ ++#define BCM95352GR_BOARD 0x0467 ++ ++/* bcm95351agr */ ++#define BCM95351AGR_BOARD 0x0470 ++ ++/* # of GPIO pins */ ++#define GPIO_NUMPINS 16 + +#endif /* _BCMDEVS_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h 2005-08-28 11:12:20.431859000 +0200 -@@ -0,0 +1,125 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation +diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h +--- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2005-12-15 15:25:47.146730500 +0100 +@@ -0,0 +1,152 @@ ++/* ++ * local version of endian.h - byte order defines ++ * ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * local version of endian.h - byte order defines -+ ******************************************************************************/ ++ * ++ * $Id$ ++*/ + +#ifndef _BCMENDIAN_H_ +#define _BCMENDIAN_H_ @@ -6413,6 +6218,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-b + (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ + (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ + (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) ++ ++/* 2 Byte swap a 32 bit value */ ++#define BCMSWAP32BY16(val) \ ++ ((uint32)( \ ++ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \ ++ (((uint32)(val) & (uint32)0xffff0000UL) >> 16) )) ++ + +static INLINE uint16 +bcmswap16(uint16 val) @@ -6426,6 +6238,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-b + return BCMSWAP32(val); +} + ++static INLINE uint32 ++bcmswap32by16(uint32 val) ++{ ++ return BCMSWAP32BY16(val); ++} ++ +/* buf - start of buffer of shorts to swap */ +/* len - byte length of buffer */ +static INLINE void @@ -6507,382 +6325,35 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-b + return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; +} + -+#endif /* _BCMENDIAN_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-08-28 11:12:20.432858848 +0200 -@@ -0,0 +1,229 @@ -+/* -+ * Hardware-specific definitions for -+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _bcmenet_47xx_h_ -+#define _bcmenet_47xx_h_ -+ -+#include -+#include -+ -+#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */ -+#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */ -+#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */ -+#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */ -+ -+/* power management event wakeup pattern constants */ -+#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */ -+#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */ -+#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */ -+#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */ -+#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */ -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+/* sometimes you just need the enet mib definitions */ -+#include -+ -+/* -+ * Host Interface Registers -+ */ -+typedef volatile struct _bcmenettregs { -+ /* Device and Power Control */ -+ uint32 devcontrol; -+ uint32 PAD[2]; -+ uint32 biststatus; -+ uint32 wakeuplength; -+ uint32 PAD[3]; -+ -+ /* Interrupt Control */ -+ uint32 intstatus; -+ uint32 intmask; -+ uint32 gptimer; -+ uint32 PAD[23]; -+ -+ /* Ethernet MAC Address Filtering Control */ -+ uint32 PAD[2]; -+ uint32 enetftaddr; -+ uint32 enetftdata; -+ uint32 PAD[2]; -+ -+ /* Ethernet MAC Control */ -+ uint32 emactxmaxburstlen; -+ uint32 emacrxmaxburstlen; -+ uint32 emaccontrol; -+ uint32 emacflowcontrol; -+ -+ uint32 PAD[20]; -+ -+ /* DMA Lazy Interrupt Control */ -+ uint32 intrecvlazy; -+ uint32 PAD[63]; -+ -+ /* DMA engine */ -+ dmaregs_t dmaregs; -+ dmafifo_t dmafifo; -+ uint32 PAD[116]; -+ -+ /* EMAC Registers */ -+ uint32 rxconfig; -+ uint32 rxmaxlength; -+ uint32 txmaxlength; -+ uint32 PAD; -+ uint32 mdiocontrol; -+ uint32 mdiodata; -+ uint32 emacintmask; -+ uint32 emacintstatus; -+ uint32 camdatalo; -+ uint32 camdatahi; -+ uint32 camcontrol; -+ uint32 enetcontrol; -+ uint32 txcontrol; -+ uint32 txwatermark; -+ uint32 mibcontrol; -+ uint32 PAD[49]; -+ -+ /* EMAC MIB counters */ -+ bcmenetmib_t mib; -+ -+ uint32 PAD[585]; -+ -+ /* Sonics SiliconBackplane config registers */ -+ sbconfig_t sbconfig; -+} bcmenetregs_t; -+ -+/* device control */ -+#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */ -+#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */ -+#define DC_ER ((uint32)1 << 15) /* ephy reset */ -+#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */ -+#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */ -+#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */ -+#define DC_PA_SHIFT 18 -+ -+/* wakeup length */ -+#define WL_P0_MASK 0x7f /* pattern 0 */ -+#define WL_D0 ((uint32)1 << 7) -+#define WL_P1_MASK 0x7f00 /* pattern 1 */ -+#define WL_P1_SHIFT 8 -+#define WL_D1 ((uint32)1 << 15) -+#define WL_P2_MASK 0x7f0000 /* pattern 2 */ -+#define WL_P2_SHIFT 16 -+#define WL_D2 ((uint32)1 << 23) -+#define WL_P3_MASK 0x7f000000 /* pattern 3 */ -+#define WL_P3_SHIFT 24 -+#define WL_D3 ((uint32)1 << 31) -+ -+/* intstatus and intmask */ -+#define I_PME ((uint32)1 << 6) /* power management event */ -+#define I_TO ((uint32)1 << 7) /* general purpose timeout */ -+#define I_PC ((uint32)1 << 10) /* descriptor error */ -+#define I_PD ((uint32)1 << 11) /* data error */ -+#define I_DE ((uint32)1 << 12) /* descriptor protocol error */ -+#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */ -+#define I_RO ((uint32)1 << 14) /* receive fifo overflow */ -+#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */ -+#define I_RI ((uint32)1 << 16) /* receive interrupt */ -+#define I_XI ((uint32)1 << 24) /* transmit interrupt */ -+#define I_EM ((uint32)1 << 26) /* emac interrupt */ -+#define I_MW ((uint32)1 << 27) /* mii write */ -+#define I_MR ((uint32)1 << 28) /* mii read */ -+ -+/* emaccontrol */ -+#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */ -+#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */ -+#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */ -+#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */ -+#define EMC_LC_SHIFT 5 -+ -+/* emacflowcontrol */ -+#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */ -+#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */ -+ -+/* interrupt receive lazy */ -+#define IRL_TO_MASK 0x00ffffff /* timeout */ -+#define IRL_FC_MASK 0xff000000 /* frame count */ -+#define IRL_FC_SHIFT 24 /* frame count */ -+ -+/* emac receive config */ -+#define ERC_DB ((uint32)1 << 0) /* disable broadcast */ -+#define ERC_AM ((uint32)1 << 1) /* accept all multicast */ -+#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */ -+#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */ -+#define ERC_LE ((uint32)1 << 4) /* loopback enable */ -+#define ERC_FE ((uint32)1 << 5) /* enable flow control */ -+#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */ -+#define ERC_RF ((uint32)1 << 7) /* reject filter */ -+ -+/* emac mdio control */ -+#define MC_MF_MASK 0x7f /* mdc frequency */ -+#define MC_PE ((uint32)1 << 7) /* mii preamble enable */ -+ -+/* emac mdio data */ -+#define MD_DATA_MASK 0xffff /* r/w data */ -+#define MD_TA_MASK 0x30000 /* turnaround value */ -+#define MD_TA_SHIFT 16 -+#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */ -+#define MD_RA_MASK 0x7c0000 /* register address */ -+#define MD_RA_SHIFT 18 -+#define MD_PMD_MASK 0xf800000 /* physical media device */ -+#define MD_PMD_SHIFT 23 -+#define MD_OP_MASK 0x30000000 /* opcode */ -+#define MD_OP_SHIFT 28 -+#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */ -+#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */ -+#define MD_SB_MASK 0xc0000000 /* start bits */ -+#define MD_SB_SHIFT 30 -+#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */ -+ -+/* emac intstatus and intmask */ -+#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */ -+#define EI_MIB ((uint32)1 << 1) /* mib interrupt */ -+#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */ -+ -+/* emac cam data high */ -+#define CD_V ((uint32)1 << 16) /* valid bit */ -+ -+/* emac cam control */ -+#define CC_CE ((uint32)1 << 0) /* cam enable */ -+#define CC_MS ((uint32)1 << 1) /* mask select */ -+#define CC_RD ((uint32)1 << 2) /* read */ -+#define CC_WR ((uint32)1 << 3) /* write */ -+#define CC_INDEX_MASK 0x3f0000 /* index */ -+#define CC_INDEX_SHIFT 16 -+#define CC_CB ((uint32)1 << 31) /* cam busy */ -+ -+/* emac ethernet control */ -+#define EC_EE ((uint32)1 << 0) /* emac enable */ -+#define EC_ED ((uint32)1 << 1) /* emac disable */ -+#define EC_ES ((uint32)1 << 2) /* emac soft reset */ -+#define EC_EP ((uint32)1 << 3) /* external phy select */ -+ -+/* emac transmit control */ -+#define EXC_FD ((uint32)1 << 0) /* full duplex */ -+#define EXC_FM ((uint32)1 << 1) /* flowmode */ -+#define EXC_SB ((uint32)1 << 2) /* single backoff enable */ -+#define EXC_SS ((uint32)1 << 3) /* small slottime */ -+ -+/* emac mib control */ -+#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */ -+ -+/* sometimes you just need the enet rxheader definitions */ -+#include -+ -+#endif /* _bcmenet_47xx_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-08-28 11:12:20.432858848 +0200 -@@ -0,0 +1,81 @@ -+/* -+ * Hardware-specific MIB definition for -+ * Broadcom Home Networking Division -+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _bcmenetmib_h_ -+#define _bcmenetmib_h_ -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+/* -+ * EMAC MIB Registers -+ */ -+typedef volatile struct { -+ uint32 tx_good_octets; -+ uint32 tx_good_pkts; -+ uint32 tx_octets; -+ uint32 tx_pkts; -+ uint32 tx_broadcast_pkts; -+ uint32 tx_multicast_pkts; -+ uint32 tx_len_64; -+ uint32 tx_len_65_to_127; -+ uint32 tx_len_128_to_255; -+ uint32 tx_len_256_to_511; -+ uint32 tx_len_512_to_1023; -+ uint32 tx_len_1024_to_max; -+ uint32 tx_jabber_pkts; -+ uint32 tx_oversize_pkts; -+ uint32 tx_fragment_pkts; -+ uint32 tx_underruns; -+ uint32 tx_total_cols; -+ uint32 tx_single_cols; -+ uint32 tx_multiple_cols; -+ uint32 tx_excessive_cols; -+ uint32 tx_late_cols; -+ uint32 tx_defered; -+ uint32 tx_carrier_lost; -+ uint32 tx_pause_pkts; -+ uint32 PAD[8]; -+ -+ uint32 rx_good_octets; -+ uint32 rx_good_pkts; -+ uint32 rx_octets; -+ uint32 rx_pkts; -+ uint32 rx_broadcast_pkts; -+ uint32 rx_multicast_pkts; -+ uint32 rx_len_64; -+ uint32 rx_len_65_to_127; -+ uint32 rx_len_128_to_255; -+ uint32 rx_len_256_to_511; -+ uint32 rx_len_512_to_1023; -+ uint32 rx_len_1024_to_max; -+ uint32 rx_jabber_pkts; -+ uint32 rx_oversize_pkts; -+ uint32 rx_fragment_pkts; -+ uint32 rx_missed_pkts; -+ uint32 rx_crc_align_errs; -+ uint32 rx_undersize; -+ uint32 rx_crc_errs; -+ uint32 rx_align_errs; -+ uint32 rx_symbol_errs; -+ uint32 rx_pause_pkts; -+ uint32 rx_nonpause_pkts; -+} bcmenetmib_t; -+ -+#endif /* _bcmenetmib_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-08-28 11:12:20.433858696 +0200 -@@ -0,0 +1,43 @@ -+/* -+ * Hardware-specific Receive Data Header for the -+ * Broadcom Home Networking Division -+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ ++#define ltoh_ua(ptr) ( \ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \ ++ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \ ++) + -+#ifndef _bcmenetrxh_h_ -+#define _bcmenetrxh_h_ ++#define ntoh_ua(ptr) ( \ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \ ++ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \ ++) + -+/* -+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header -+ * with every frame consisting of -+ * 16bits of frame length, followed by -+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined. -+ */ -+typedef volatile struct { -+ uint16 len; -+ uint16 flags; -+ uint16 pad[12]; -+} bcmenetrxh_t; -+ -+#define RXHDR_LEN 28 -+ -+#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */ -+#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */ -+#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */ -+#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */ -+#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */ -+#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */ -+#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */ -+#define RXF_CRC ((uint16)1 << 1) /* crc error */ -+#define RXF_OV ((uint16)1 << 0) /* fifo overflow */ -+ -+#endif /* _bcmenetrxh_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-08-28 11:12:20.433858696 +0200 -@@ -0,0 +1,131 @@ ++#endif /* _BCMENDIAN_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h +--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2005-12-15 16:04:35.850827500 +0100 +@@ -0,0 +1,87 @@ +/* + * NVRAM variable manipulation + * -+ * $Copyright Open Broadcom Corporation$ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id: bcmnvram.h,v 1.1.1.1 2004/01/21 03:50:44 gigis Exp $ ++ * $Id$ + */ + +#ifndef _bcmnvram_h_ @@ -6895,8 +6366,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-br +struct nvram_header { + uint32 magic; + uint32 len; -+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ -+ uint32 config_refresh; /* 0:15 config, 16:31 refresh */ ++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ ++ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ + uint32 config_ncdl; /* ncdl values for memc */ +}; + @@ -6907,31 +6378,19 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-br +}; + +/* -+ * Initialize NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern int nvram_init(void *sbh); -+ -+/* -+ * Disable NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern void nvram_exit(void); -+ -+/* + * Get the value of an NVRAM variable. The pointer returned may be + * invalid after a set. + * @param name name of variable to get + * @return value of variable or NULL if undefined + */ -+extern char * nvram_get(const char *name); ++extern char * __init nvram_get(const char *name); + +/* + * Get the value of an NVRAM variable. + * @param name name of variable to get + * @return value of variable or NUL if undefined + */ -+#define nvram_safe_get(name) (nvram_get(name) ? : "") ++#define nvram_safe_get(name) (BCMINIT(nvram_get)(name) ? : "") + +/* + * Match an NVRAM variable. @@ -6940,9 +6399,9 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-br + * @return TRUE if variable is defined and its value is string equal + * to match or FALSE otherwise + */ -+static INLINE int ++static inline int +nvram_match(char *name, char *match) { -+ const char *value = nvram_get(name); ++ const char *value = BCMINIT(nvram_get)(name); + return (value && !strcmp(value, match)); +} + @@ -6953,69 +6412,31 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-br + * @return TRUE if variable is defined and its value is not string + * equal to invmatch or FALSE otherwise + */ -+static INLINE int ++static inline int +nvram_invmatch(char *name, char *invmatch) { -+ const char *value = nvram_get(name); ++ const char *value = BCMINIT(nvram_get)(name); + return (value && strcmp(value, invmatch)); +} + -+/* -+ * Set the value of an NVRAM variable. The name and value strings are -+ * copied into private storage. Pointers to previously set values -+ * may become invalid. The new value may be immediately -+ * retrieved but will not be permanently stored until a commit. -+ * @param name name of variable to set -+ * @param value value of variable -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_set(const char *name, const char *value); -+ -+/* -+ * Unset an NVRAM variable. Pointers to previously set values -+ * remain valid until a set. -+ * @param name name of variable to unset -+ * @return 0 on success and errno on failure -+ * NOTE: use nvram_commit to commit this change to flash. -+ */ -+extern int nvram_unset(const char *name); -+ -+/* -+ * Commit NVRAM variables to permanent storage. All pointers to values -+ * may be invalid after a commit. -+ * NVRAM values are undefined after a commit. -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_commit(void); -+ -+/* -+ * Get all NVRAM variables (format name=value\0 ... \0\0). -+ * @param buf buffer to store variables -+ * @param count size of buffer in bytes -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_getall(char *buf, int count); -+ -+extern int kernel_write(unsigned char *buffer, int offset, int length); -+ +#endif /* _LANGUAGE_ASSEMBLY */ + +#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ +#define NVRAM_VERSION 1 +#define NVRAM_HEADER_SIZE 20 -+#define NVRAM_LOC_GAP 0x100000 -+#define NVRAM_SPACE 0x2000 -+#define NVRAM_FIRST_LOC (0xbfd00000 - NVRAM_SPACE) -+#define NVRAM_LAST_LOC (0xc0000000 - NVRAM_SPACE) ++#define NVRAM_SPACE 0x8000 ++ ++#define NVRAM_MAX_VALUE_LEN 255 ++#define NVRAM_MAX_PARAM_LEN 64 + +#endif /* _bcmnvram_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-08-28 11:12:20.433858696 +0200 -@@ -0,0 +1,24 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h +--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2005-12-15 15:34:32.919589250 +0100 +@@ -0,0 +1,23 @@ +/* -+ * Misc useful routines to access NIC srom ++ * Misc useful routines to access NIC local SROM/OTP . + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -7029,58 +6450,34 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brc +#ifndef _bcmsrom_h_ +#define _bcmsrom_h_ + -+extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count); ++extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count); ++ ++extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); ++extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); + -+extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); -+extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); -+extern int srom_parsecis(uint8 *cis, char **vars, int *count); -+ +#endif /* _bcmsrom_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h 2005-08-28 11:12:20.435858392 +0200 -@@ -0,0 +1,136 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h +--- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2005-12-15 16:44:25.619117750 +0100 +@@ -0,0 +1,308 @@ +/* + * Misc useful os-independent macros and functions. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _bcmutils_h_ -+#define _bcmutils_h_ -+ -+#ifndef MIN -+#define MIN(a, b) (((a)<(b))?(a):(b)) -+#endif -+ -+#ifndef MAX -+#define MAX(a, b) (((a)>(b))?(a):(b)) -+#endif -+ -+#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -+#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) -+#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) -+#define ISPOWEROF2(x) ((((x)-1)&(x))==0) -+#define OFFSETOF(type, member) ((uint) &((type *)0)->member) -+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) -+ -+/* bit map related macros */ -+#ifndef setbit -+#define NBBY 8 /* 8 bits per byte */ -+#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) -+#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -+#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) -+#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) -+#endif ++#define _bcmutils_h_ + -+#define NBITS(type) (sizeof (type) * 8) ++/*** driver-only section ***/ ++#include + +#define _BCM_U 0x01 /* upper */ +#define _BCM_L 0x02 /* lower */ @@ -7091,6 +6488,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-br +#define _BCM_X 0x40 /* hex digit */ +#define _BCM_SP 0x80 /* hard space (0x20) */ + ++#define GPIO_PIN_NOTDEFINED 0x20 ++ +extern unsigned char bcm_ctype[]; +#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) + @@ -7121,25 +6520,142 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-br + +/* generic osl packet queue */ +struct pktq { -+ void *head; -+ void *tail; -+ uint len; -+ uint maxlen; ++ void *head; /* first packet to dequeue */ ++ void *tail; /* last packet to dequeue */ ++ uint len; /* number of queued packets */ ++ uint maxlen; /* maximum number of queued packets */ ++ bool priority; /* enqueue by packet priority */ ++ uint8 prio_map[MAXPRIO+1]; /* user priority to packet enqueue policy map */ +}; +#define DEFAULT_QLEN 128 + -+#define pktq_len(q) ((q)->len) ++#define pktq_len(q) ((q)->len) +#define pktq_avail(q) ((q)->maxlen - (q)->len) +#define pktq_head(q) ((q)->head) +#define pktq_full(q) ((q)->len >= (q)->maxlen) ++#define _pktq_pri(q, pri) ((q)->prio_map[pri]) ++#define pktq_tailpri(q) ((q)->tail ? _pktq_pri(q, PKTPRIO((q)->tail)) : _pktq_pri(q, 0)) ++ ++/* externs */ ++/* packet */ ++extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf); ++extern uint pkttotlen(osl_t *osh, void *); ++extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]); ++extern void pktenq(struct pktq *q, void *p, bool lifo); ++extern void *pktdeq(struct pktq *q); ++extern void *pktdeqtail(struct pktq *q); ++/* string */ ++extern uint bcm_atoi(char *s); ++extern uchar bcm_toupper(uchar c); ++extern ulong bcm_strtoul(char *cp, char **endp, uint base); ++extern char *bcmstrstr(char *haystack, char *needle); ++extern char *bcmstrcat(char *dest, const char *src); ++extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen); ++/* ethernet address */ ++extern char *bcm_ether_ntoa(char *ea, char *buf); ++extern int bcm_ether_atoe(char *p, char *ea); ++/* delay */ ++extern void bcm_mdelay(uint ms); ++/* variable access */ ++extern char *getvar(char *vars, char *name); ++extern int getintvar(char *vars, char *name); ++extern uint getgpiopin(char *vars, char *pin_name, uint def_pin); ++#define bcmlog(fmt, a1, a2) ++#define bcmdumplog(buf, size) *buf = '\0' ++#define bcmdumplogent(buf, idx) -1 ++ ++/*** driver/apps-shared section ***/ ++ ++#define BCME_STRLEN 64 ++#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) ++ ++ ++/* ++ * error codes could be added but the defined ones shouldn't be changed/deleted ++ * these error codes are exposed to the user code ++ * when ever a new error code is added to this list ++ * please update errorstring table with the related error string and ++ * update osl files with os specific errorcode map ++*/ ++ ++#define BCME_ERROR -1 /* Error generic */ ++#define BCME_BADARG -2 /* Bad Argument */ ++#define BCME_BADOPTION -3 /* Bad option */ ++#define BCME_NOTUP -4 /* Not up */ ++#define BCME_NOTDOWN -5 /* Not down */ ++#define BCME_NOTAP -6 /* Not AP */ ++#define BCME_NOTSTA -7 /* Not STA */ ++#define BCME_BADKEYIDX -8 /* BAD Key Index */ ++#define BCME_RADIOOFF -9 /* Radio Off */ ++#define BCME_NOTBANDLOCKED -10 /* Not bandlocked */ ++#define BCME_NOCLK -11 /* No Clock*/ ++#define BCME_BADRATESET -12 /* BAD RateSet*/ ++#define BCME_BADBAND -13 /* BAD Band */ ++#define BCME_BUFTOOSHORT -14 /* Buffer too short */ ++#define BCME_BUFTOOLONG -15 /* Buffer too Long */ ++#define BCME_BUSY -16 /* Busy*/ ++#define BCME_NOTASSOCIATED -17 /* Not associated*/ ++#define BCME_BADSSIDLEN -18 /* BAD SSID Len */ ++#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel*/ ++#define BCME_BADCHAN -20 /* BAD Channel */ ++#define BCME_BADADDR -21 /* BAD Address*/ ++#define BCME_NORESOURCE -22 /* No resources*/ ++#define BCME_UNSUPPORTED -23 /* Unsupported*/ ++#define BCME_BADLEN -24 /* Bad Length*/ ++#define BCME_NOTREADY -25 /* Not ready Yet*/ ++#define BCME_EPERM -26 /* Not Permitted */ ++#define BCME_NOMEM -27 /* No Memory */ ++#define BCME_ASSOCIATED -28 /* Associated */ ++#define BCME_RANGE -29 /* Range Error*/ ++#define BCME_NOTFOUND -30 /* Not found */ ++#define BCME_LAST BCME_NOTFOUND ++ ++#ifndef ABS ++#define ABS(a) (((a)<0)?-(a):(a)) ++#endif ++ ++#ifndef MIN ++#define MIN(a, b) (((a)<(b))?(a):(b)) ++#endif ++ ++#ifndef MAX ++#define MAX(a, b) (((a)>(b))?(a):(b)) ++#endif ++ ++#define CEIL(x, y) (((x) + ((y)-1)) / (y)) ++#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) ++#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) ++#define ISPOWEROF2(x) ((((x)-1)&(x))==0) ++#define VALID_MASK(mask) !((mask) & ((mask) + 1)) ++#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) ++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) ++ ++/* bit map related macros */ ++#ifndef setbit ++#define NBBY 8 /* 8 bits per byte */ ++#define setbit(a,i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) ++#define clrbit(a,i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) ++#define isset(a,i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) ++#define isclr(a,i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) ++#endif ++ ++#define NBITS(type) (sizeof(type) * 8) ++#define NBITVAL(bits) (1 << (bits)) ++#define MAXBITVAL(bits) ((1 << (bits)) - 1) + +/* crc defines */ +#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ +#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ +#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ +#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++ ++/* bcm_format_flags() bit description structure */ ++typedef struct bcm_bit_desc { ++ uint32 bit; ++ char* name; ++} bcm_bit_desc_t; + +/* tag_ID/length/value_buffer tuple */ +typedef struct bcm_tlv { @@ -7148,48 +6664,124 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-br + uint8 data[1]; +} bcm_tlv_t; + -+/* externs */ -+extern uint bcm_atoi(char *s); -+extern uchar bcm_toupper(uchar c); -+extern ulong bcm_strtoul(char *cp, char **endp, uint base); -+extern void deadbeef(char *p, uint len); -+extern void prhex(char *msg, uchar *buf, uint len); -+extern void prpkt(char *msg, void *drv, void *p0); -+extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); -+extern uint pkttotlen(void *drv, void *); -+extern uchar *bcm_ether_ntoa(char *ea, char *buf); -+extern int bcm_ether_atoe(char *p, char *ea); -+extern void bcm_mdelay(uint ms); -+extern char *getvar(char *vars, char *name); -+extern int getintvar(char *vars, char *name); ++/* Check that bcm_tlv_t fits into the given buflen */ ++#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) ++ ++/* buffer length for ethernet address from bcm_ether_ntoa() */ ++#define ETHER_ADDR_STR_LEN 18 ++ ++/* unaligned load and store macros */ ++#ifdef IL_BIGENDIAN ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); ++} ++ ++static INLINE void ++store32_ua(uint8 *a, uint32 v) ++{ ++ a[0] = (v >> 24) & 0xff; ++ a[1] = (v >> 16) & 0xff; ++ a[2] = (v >> 8) & 0xff; ++ a[3] = v & 0xff; ++} ++ ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[0] << 8) | a[1]); ++} ++ ++static INLINE void ++store16_ua(uint8 *a, uint16 v) ++{ ++ a[0] = (v >> 8) & 0xff; ++ a[1] = v & 0xff; ++} ++ ++#else ++ ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); ++} ++ ++static INLINE void ++store32_ua(uint8 *a, uint32 v) ++{ ++ a[3] = (v >> 24) & 0xff; ++ a[2] = (v >> 16) & 0xff; ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} ++ ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[1] << 8) | a[0]); ++} ++ ++static INLINE void ++store16_ua(uint8 *a, uint16 v) ++{ ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} ++ ++#endif + -+extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); -+extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); -+extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); ++/* externs */ ++/* crc */ ++extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc); ++/* format/print */ ++/* IE parsing */ ++extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); +extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); +extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); -+extern void pktqinit(struct pktq *q, int maxlen); -+extern void pktenq(struct pktq *q, void *p, bool lifo); -+extern void *pktdeq(struct pktq *q); + -+#define bcmlog(fmt, a1, a2) -+#define bcmdumplog(buf, size) *buf = '\0' ++/* bcmerror*/ ++extern const char *bcmerrorstr(int bcmerror); ++ ++/* multi-bool data type: set of bools, mbool is true if any is set */ ++typedef uint32 mbool; ++#define mboolset(mb, bit) (mb |= bit) /* set one bool */ ++#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */ ++#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */ ++#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) ++ ++/* power conversion */ ++extern uint16 bcm_qdbm_to_mw(uint8 qdbm); ++extern uint8 bcm_mw_to_qdbm(uint16 mw); ++ ++/* generic datastruct to help dump routines */ ++struct fielddesc { ++ char *nameandfmt; ++ uint32 offset; ++ uint32 len; ++}; ++ ++typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset); ++extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize); ++ ++extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); + +#endif /* _bcmutils_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-08-28 11:12:20.435858392 +0200 +diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bcm947xx/include/bitfuncs.h +--- linux.old/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h 2005-12-15 15:34:40.268048500 +0100 @@ -0,0 +1,85 @@ +/* + * bit manipulation utility functions + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + @@ -7265,85 +6857,14 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-br +#endif + +#endif /* _BITFUNCS_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h 2005-08-28 11:12:20.435858392 +0200 -@@ -0,0 +1,69 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm947xx/include/flash.h +--- linux.old/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/flash.h 2005-12-15 15:34:44.280299250 +0100 +@@ -0,0 +1,188 @@ +/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * flash.h: Common definitions for flash access. + * -+*/ -+ -+#ifndef _epivers_h_ -+#define _epivers_h_ -+ -+#ifdef linux -+#include -+#endif -+ -+/* Vendor Name, ASCII, 32 chars max */ -+#ifdef COMPANYNAME -+#define HPNA_VENDOR COMPANYNAME -+#else -+#define HPNA_VENDOR "Broadcom Corporation" -+#endif -+ -+/* Driver Date, ASCII, 32 chars max */ -+#define HPNA_DRV_BUILD_DATE __DATE__ -+ -+/* Hardware Manufacture Date, ASCII, 32 chars max */ -+#define HPNA_HW_MFG_DATE "Not Specified" -+ -+/* See documentation for Device Type values, 32 values max */ -+#ifndef HPNA_DEV_TYPE -+ -+#if defined(CONFIG_BRCM_VJ) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } -+ -+#elif defined(CONFIG_BCRM_93725) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } -+ -+#else -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } -+ -+#endif -+ -+#endif /* !HPNA_DEV_TYPE */ -+ -+ -+#define EPI_MAJOR_VERSION 1 -+ -+#define EPI_MINOR_VERSION 1 -+ -+#define EPI_RC_NUMBER 2 -+ -+#define EPI_INCREMENTAL_NUMBER 0 -+ -+#define EPI_BUILD_NUMBER 0 -+ -+#define EPI_VERSION 1,1,2,0 -+ -+#define EPI_VERSION_NUM 0x01010200 -+ -+/* Driver Version String, ASCII, 32 chars max */ -+#define EPI_VERSION_STR "1.1.2.0" -+#define EPI_ROUTER_VERSION_STR "1.1.2.0" -+ -+#endif /* _epivers_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in ---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-08-28 11:12:20.436858240 +0200 -@@ -0,0 +1,69 @@ -+/* -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -7352,149 +6873,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5- + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ -+ * -+*/ -+ -+#ifndef _epivers_h_ -+#define _epivers_h_ -+ -+#ifdef linux -+#include -+#endif -+ -+/* Vendor Name, ASCII, 32 chars max */ -+#ifdef COMPANYNAME -+#define HPNA_VENDOR COMPANYNAME -+#else -+#define HPNA_VENDOR "Broadcom Corporation" -+#endif -+ -+/* Driver Date, ASCII, 32 chars max */ -+#define HPNA_DRV_BUILD_DATE __DATE__ -+ -+/* Hardware Manufacture Date, ASCII, 32 chars max */ -+#define HPNA_HW_MFG_DATE "Not Specified" -+ -+/* See documentation for Device Type values, 32 values max */ -+#ifndef HPNA_DEV_TYPE -+ -+#if defined(CONFIG_BRCM_VJ) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } -+ -+#elif defined(CONFIG_BCRM_93725) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } -+ -+#else -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } -+ -+#endif -+ -+#endif /* !HPNA_DEV_TYPE */ -+ -+ -+#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@ -+ -+#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@ -+ -+#define EPI_RC_NUMBER @EPI_RC_NUMBER@ -+ -+#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@ -+ -+#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@ -+ -+#define EPI_VERSION @EPI_VERSION@ -+ -+#define EPI_VERSION_NUM @EPI_VERSION_NUM@ -+ -+/* Driver Version String, ASCII, 32 chars max */ -+#define EPI_VERSION_STR "@EPI_VERSION_STR@" -+#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@" -+ -+#endif /* _epivers_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-08-28 11:12:20.436858240 +0200 -@@ -0,0 +1,60 @@ -+/* -+ * Driver-specific socket ioctls -+ * used by BSD, Linux, and PSOS -+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _etsockio_h_ -+#define _etsockio_h_ -+ -+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */ -+ -+ -+#if defined(linux) -+#define SIOCSETCUP (SIOCDEVPRIVATE + 0) -+#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1) -+#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2) -+#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3) -+#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4) -+#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5) -+#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */ -+#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7) -+#define SIOCTXGEN (SIOCDEVPRIVATE + 8) -+#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) -+#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) -+#define SIOCPERF (SIOCDEVPRIVATE + 11) -+#define SIOCPERFDMA (SIOCDEVPRIVATE + 12) -+ -+#else /* !linux */ -+ -+#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq) -+#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq) -+#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq) -+#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq) -+#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq) -+#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq) -+#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */ -+#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq) -+#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq) -+ -+#endif -+ -+/* arg to SIOCTXGEN */ -+struct txg { -+ uint32 num; /* number of frames to send */ -+ uint32 delay; /* delay in microseconds between sending each */ -+ uint32 size; /* size of ether frame to send */ -+ uchar buf[1514]; /* starting ether frame data */ -+}; -+ -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h 2005-08-28 11:12:20.437858088 +0200 -@@ -0,0 +1,184 @@ -+/* -+ * flash.h: Common definitions for flash access. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ + */ + +/* Types of flashes we know about */ -+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t; ++typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t; + +/* Commands to write/erase the flases */ +typedef struct _flash_cmds{ @@ -7537,13 +6919,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/ + + +#ifdef DECLARE_FLASHES ++flash_cmds_t sflash_cmd_t = ++ { SFLASH, 0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + +flash_cmds_t flash_cmds[] = { -+/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ -+ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, -+ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, -+ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, -+ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ ++ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, + { 0 } +}; + @@ -7612,6 +6996,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/ +}; + + ++flash_desc_t sflash_desc = ++ { 0, 0, 0, 0, SFLASH, 0, 0, 0, 0, 0, NULL, "SFLASH" }; + +flash_desc_t flashes[] = { + { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" }, @@ -7640,7 +7026,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/ + { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" }, + { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" }, + { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" }, -+ { 0x0001, 0x2201, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, ++ { 0x0001, 0x227e, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, + { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" }, + { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" }, + { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" }, @@ -7663,238 +7049,46 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/ +extern flash_desc_t flashes[]; + +#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-08-28 11:12:20.437858088 +0200 -@@ -0,0 +1,34 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bcm947xx/include/flashutl.h +--- linux.old/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/flashutl.h 2005-12-15 15:34:48.160541750 +0100 +@@ -0,0 +1,27 @@ +/* + * BCM47XX FLASH driver interface + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _flashutl_h_ +#define _flashutl_h_ + -+#define FLASH_BASE 0xbfc00000 /* BCM4710 */ -+ -+int flash_init(void* base_addr, char *flash_str); -+int flash_erase(void); -+int flash_eraseblk(unsigned long off); -+int flash_write(unsigned long off, uint16 *src, uint nbytes); -+unsigned long flash_block_base(unsigned long off); -+unsigned long flash_block_lim(unsigned long off); -+int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes); -+ -+void nvWrite(unsigned short *data, unsigned int len); -+ -+/* Global vars */ -+extern char* flashutl_base; -+extern flash_desc_t* flashutl_desc; -+extern flash_cmds_t* flashutl_cmd; -+ -+#endif /* _flashutl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-08-28 11:12:20.438857936 +0200 -@@ -0,0 +1,181 @@ -+/* -+ * Generic Broadcom Home Networking Division (HND) DMA engine definitions. -+ * This supports the following chips: BCM42xx, 44xx, 47xx . -+ * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ -+ -+#ifndef _hnddma_h_ -+#define _hnddma_h_ -+ -+/* -+ * Each DMA processor consists of a transmit channel and a receive channel. -+ */ -+typedef volatile struct { -+ /* transmit channel */ -+ uint32 xmtcontrol; /* enable, et al */ -+ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */ -+ uint32 xmtptr; /* last descriptor posted to chip */ -+ uint32 xmtstatus; /* current active descriptor, et al */ -+ -+ /* receive channel */ -+ uint32 rcvcontrol; /* enable, et al */ -+ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */ -+ uint32 rcvptr; /* last descriptor posted to chip */ -+ uint32 rcvstatus; /* current active descriptor, et al */ -+} dmaregs_t; -+ -+typedef volatile struct { -+ /* diag access */ -+ uint32 fifoaddr; /* diag address */ -+ uint32 fifodatalow; /* low 32bits of data */ -+ uint32 fifodatahigh; /* high 32bits of data */ -+ uint32 pad; /* reserved */ -+} dmafifo_t; -+ -+/* transmit channel control */ -+#define XC_XE ((uint32)1 << 0) /* transmit enable */ -+#define XC_SE ((uint32)1 << 1) /* transmit suspend request */ -+#define XC_LE ((uint32)1 << 2) /* loopback enable */ -+#define XC_FL ((uint32)1 << 4) /* flush request */ -+ -+/* transmit descriptor table pointer */ -+#define XP_LD_MASK 0xfff /* last valid descriptor */ -+ -+/* transmit channel status */ -+#define XS_CD_MASK 0x0fff /* current descriptor pointer */ -+#define XS_XS_MASK 0xf000 /* transmit state */ -+#define XS_XS_SHIFT 12 -+#define XS_XS_DISABLED 0x0000 /* disabled */ -+#define XS_XS_ACTIVE 0x1000 /* active */ -+#define XS_XS_IDLE 0x2000 /* idle wait */ -+#define XS_XS_STOPPED 0x3000 /* stopped */ -+#define XS_XS_SUSP 0x4000 /* suspend pending */ -+#define XS_XE_MASK 0xf0000 /* transmit errors */ -+#define XS_XE_SHIFT 16 -+#define XS_XE_NOERR 0x00000 /* no error */ -+#define XS_XE_DPE 0x10000 /* descriptor protocol error */ -+#define XS_XE_DFU 0x20000 /* data fifo underrun */ -+#define XS_XE_BEBR 0x30000 /* bus error on buffer read */ -+#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */ -+#define XS_FL ((uint32)1 << 20) /* flushed */ -+ -+/* receive channel control */ -+#define RC_RE ((uint32)1 << 0) /* receive enable */ -+#define RC_RO_MASK 0xfe /* receive frame offset */ -+#define RC_RO_SHIFT 1 -+#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */ -+ -+/* receive descriptor table pointer */ -+#define RP_LD_MASK 0xfff /* last valid descriptor */ -+ -+/* receive channel status */ -+#define RS_CD_MASK 0x0fff /* current descriptor pointer */ -+#define RS_RS_MASK 0xf000 /* receive state */ -+#define RS_RS_SHIFT 12 -+#define RS_RS_DISABLED 0x0000 /* disabled */ -+#define RS_RS_ACTIVE 0x1000 /* active */ -+#define RS_RS_IDLE 0x2000 /* idle wait */ -+#define RS_RS_STOPPED 0x3000 /* reserved */ -+#define RS_RE_MASK 0xf0000 /* receive errors */ -+#define RS_RE_SHIFT 16 -+#define RS_RE_NOERR 0x00000 /* no error */ -+#define RS_RE_DPE 0x10000 /* descriptor protocol error */ -+#define RS_RE_DFO 0x20000 /* data fifo overflow */ -+#define RS_RE_BEBW 0x30000 /* bus error on buffer write */ -+#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */ -+ -+/* fifoaddr */ -+#define FA_OFF_MASK 0xffff /* offset */ -+#define FA_SEL_MASK 0xf0000 /* select */ -+#define FA_SEL_SHIFT 16 -+#define FA_SEL_XDD 0x00000 /* transmit dma data */ -+#define FA_SEL_XDP 0x10000 /* transmit dma pointers */ -+#define FA_SEL_RDD 0x40000 /* receive dma data */ -+#define FA_SEL_RDP 0x50000 /* receive dma pointers */ -+#define FA_SEL_XFD 0x80000 /* transmit fifo data */ -+#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */ -+#define FA_SEL_RFD 0xc0000 /* receive fifo data */ -+#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */ -+ -+/* -+ * DMA Descriptor -+ * Descriptors are only read by the hardware, never written back. -+ */ -+typedef volatile struct { -+ uint32 ctrl; /* misc control bits & bufcount */ -+ uint32 addr; /* data buffer address */ -+} dmadd_t; -+ -+/* -+ * Each descriptor ring must be 4096byte aligned -+ * and fit within a single 4096byte page. -+ */ -+#define DMAMAXRINGSZ 4096 -+#define DMARINGALIGN 4096 + -+/* control flags */ -+#define CTRL_BC_MASK 0x1fff /* buffer byte count */ -+#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */ -+#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */ -+#define CTRL_EOF ((uint32)1 << 30) /* end of frame */ -+#define CTRL_SOF ((uint32)1 << 31) /* start of frame */ ++#ifndef _LANGUAGE_ASSEMBLY + -+/* control flags in the range [27:20] are core-specific and not defined here */ -+#define CTRL_CORE_MASK 0x0ff00000 ++int sysFlashInit(char *flash_str); ++int sysFlashRead(uint off, uchar *dst, uint bytes); ++int sysFlashWrite(uint off, uchar *src, uint bytes); ++void nvWrite(unsigned short *data, unsigned int len); + -+/* export structure */ -+typedef volatile struct { -+ /* rx error counters */ -+ uint rxgiants; /* rx giant frames */ -+ uint rxnobuf; /* rx out of dma descriptors */ -+ /* tx error counters */ -+ uint txnobuf; /* tx out of dma descriptors */ -+} hnddma_t; -+ -+#ifndef di_t -+#define di_t void -+#endif ++#endif /* _LANGUAGE_ASSEMBLY */ + -+/* externs */ -+extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs, -+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, -+ uint ddoffset, uint dataoffset, uint *msg_level); -+extern void dma_detach(di_t *di); -+extern void dma_txreset(di_t *di); -+extern void dma_rxreset(di_t *di); -+extern void dma_txinit(di_t *di); -+extern bool dma_txenabled(di_t *di); -+extern void dma_rxinit(di_t *di); -+extern void dma_rxenable(di_t *di); -+extern bool dma_rxenabled(di_t *di); -+extern void dma_txsuspend(di_t *di); -+extern void dma_txresume(di_t *di); -+extern bool dma_txsuspended(di_t *di); -+extern bool dma_txstopped(di_t *di); -+extern bool dma_rxstopped(di_t *di); -+extern int dma_txfast(di_t *di, void *p, uint32 coreflags); -+extern int dma_tx(di_t *di, void *p, uint32 coreflags); -+extern void dma_fifoloopbackenable(di_t *di); -+extern void *dma_rx(di_t *di); -+extern void dma_rxfill(di_t *di); -+extern void dma_txreclaim(di_t *di, bool forceall); -+extern void dma_rxreclaim(di_t *di); -+extern char *dma_dump(di_t *di, char *buf); -+extern char *dma_dumptx(di_t *di, char *buf); -+extern char *dma_dumprx(di_t *di, char *buf); -+extern uint dma_getvar(di_t *di, char *name); -+extern void *dma_getnexttxp(di_t *di, bool forceall); -+extern void *dma_getnextrxp(di_t *di, bool forceall); -+extern void dma_txblock(di_t *di); -+extern void dma_txunblock(di_t *di); -+extern uint dma_txactive(di_t *di); -+ -+#endif /* _hnddma_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-08-28 11:12:20.439857784 +0200 ++#endif /* _flashutl_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h +--- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2005-12-15 15:34:53.396869000 +0100 @@ -0,0 +1,16 @@ +/* + * Alternate include file for HND sbmips.h since CFE also ships with + * a sbmips.h. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -7906,14 +7100,14 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brc + */ + +#include "sbmips.h" -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-08-28 11:12:20.440857632 +0200 -@@ -0,0 +1,313 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/bcm947xx/include/linux_osl.h +--- linux.old/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h 2005-12-15 17:23:39.225126750 +0100 +@@ -0,0 +1,331 @@ +/* + * Linux OS Independent Layer + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -7933,30 +7127,73 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +#include + +/* assert and panic */ ++#ifdef __GNUC__ ++#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) ++#if GCC_VERSION > 30100 +#define ASSERT(exp) do {} while (0) ++#else ++/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/ ++#define ASSERT(exp) ++#endif ++#endif + -+/* PCMCIA attribute space access macros */ -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_read_attr((osh), (offset), (buf), (size)) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_write_attr((osh), (offset), (buf), (size)) -+extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size); -+extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size); ++/* microsecond delay */ ++#define OSL_DELAY(usec) osl_delay(usec) ++extern void osl_delay(uint usec); + +/* PCI configuration space access macros */ -+#define OSL_PCI_READ_CONFIG(loc, offset, size) \ -+ osl_pci_read_config((loc), (offset), (size)) -+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \ -+ osl_pci_write_config((loc), (offset), (size), (val)) -+extern uint32 osl_pci_read_config(void *loc, uint size, uint offset); -+extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val); ++#define OSL_PCI_READ_CONFIG(osh, offset, size) \ ++ osl_pci_read_config((osh), (offset), (size)) ++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ ++ osl_pci_write_config((osh), (offset), (size), (val)) ++extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset); ++extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val); ++ ++/* PCI device bus # and slot # */ ++#define OSL_PCI_BUS(osh) osl_pci_bus(osh) ++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) ++extern uint osl_pci_bus(osl_t *osh); ++extern uint osl_pci_slot(osl_t *osh); + +/* OSL initialization */ -+#define osl_init() do {} while (0) ++extern osl_t *osl_attach(void *pdev); ++extern void osl_detach(osl_t *osh); + +/* host/bus architecture-specific byte swap */ +#define BUS_SWAP32(v) (v) + ++/* general purpose memory allocation */ ++ ++#define MALLOC(osh, size) kmalloc(size, GFP_ATOMIC) ++#define MFREE(osh, addr, size) kfree(addr); ++ ++#define MALLOC_FAILED(osh) osl_malloc_failed((osh)) ++ ++extern void *osl_malloc(osl_t *osh, uint size); ++extern void osl_mfree(osl_t *osh, void *addr, uint size); ++extern uint osl_malloced(osl_t *osh); ++extern uint osl_malloc_failed(osl_t *osh); ++ ++/* allocate/free shared (dma-able) consistent memory */ ++#define DMA_CONSISTENT_ALIGN PAGE_SIZE ++#define DMA_ALLOC_CONSISTENT(osh, size, pap) \ ++ osl_dma_alloc_consistent((osh), (size), (pap)) ++#define DMA_FREE_CONSISTENT(osh, va, size, pa) \ ++ osl_dma_free_consistent((osh), (void*)(va), (size), (pa)) ++extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap); ++extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa); ++ ++/* map/unmap direction */ ++#define DMA_TX 1 ++#define DMA_RX 2 ++ ++/* register access macros */ ++#if defined(BCMJTAG) ++#include ++#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r))) ++#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r))) ++#endif ++ +/* + * BINOSL selects the slightly slower function-call-based binary compatible osl. + * Macros expand to calls to functions defined in linux_osl.c . @@ -7969,22 +7206,39 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +#include + +/* register access macros */ ++#if !defined(BCMJTAG) ++#ifndef IL_BIGENDIAN ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ ++ readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#else /* IL_BIGENDIAN */ +#define R_REG(r) ({ \ + __typeof(*(r)) __osl_v; \ + switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = readb((volatile uint8*)(r)); break; \ -+ case sizeof(uint16): __osl_v = readw((volatile uint16*)(r)); break; \ ++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ + case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ + } \ + __osl_v; \ +}) +#define W_REG(r, v) do { \ + switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ + case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ + } \ +} while (0) ++#endif ++#endif + +#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) +#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) @@ -7994,10 +7248,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) +#define bzero(b, len) memset((b), '\0', (len)) + -+/* general purpose memory allocation */ -+#define MALLOC(size) kmalloc((size), GFP_ATOMIC) -+#define MFREE(addr, size) kfree((addr)) -+ +/* uncached virtual address */ +#ifdef mips +#define OSL_UNCACHED(va) KSEG1ADDR((va)) @@ -8031,52 +7281,31 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) +#define REG_UNMAP(va) iounmap((void *)(va)) + -+/* allocate/free shared (dma-able) consistent (uncached) memory */ -+#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ -+ pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap)) -+#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ -+ pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa)) -+ -+/* map/unmap direction */ -+#define DMA_TX PCI_DMA_TODEVICE -+#define DMA_RX PCI_DMA_FROMDEVICE -+ -+/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(dev, va, size, direction, p) \ -+ pci_map_single((dev), (va), (size), (direction)) -+#define DMA_UNMAP(dev, pa, size, direction, p) \ -+ pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction)) -+ -+/* microsecond delay */ -+#define OSL_DELAY(usec) udelay(usec) -+#include -+#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \ -+ schedule_timeout((usec*HZ)/1000000); -+#define OSL_IN_INTERRUPT() in_interrupt() -+ +/* shared (dma-able) memory access macros */ +#define R_SM(r) *(r) +#define W_SM(r, v) (*(r) = (v)) +#define BZERO_SM(r, len) memset((r), '\0', (len)) + +/* packet primitives */ -+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) -+#define PKTFREE(drv, skb, send) osl_pktfree((skb)) -+#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data) -+#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len) -+#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head)) -+#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) -+#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next) ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data) ++#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len) ++#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head)) ++#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) ++#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next) +#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) -+#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) -+#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) -+#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) -+#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) ++#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) ++#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) ++#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) +#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) +#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) +#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) +#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) -+extern void *osl_pktget(void *drv, uint len, bool send); ++#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) ++#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); +extern void osl_pktfree(void *skb); + +#else /* BINOSL */ @@ -8102,20 +7331,17 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +extern int osl_sprintf(char *buf, const char *format, ...); +extern int osl_strcmp(const char *s1, const char *s2); +extern int osl_strncmp(const char *s1, const char *s2, uint n); -+extern int osl_strlen(char *s); ++extern int osl_strlen(const char *s); +extern char* osl_strcpy(char *d, const char *s); +extern char* osl_strncpy(char *d, const char *s, uint n); + +/* register access macros */ -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = osl_readb((volatile uint8*)(r)); break; \ -+ case sizeof(uint16): __osl_v = osl_readw((volatile uint16*)(r)); break; \ -+ case sizeof(uint32): __osl_v = osl_readl((volatile uint32*)(r)); break; \ -+ } \ -+ __osl_v; \ -+}) ++#if !defined(BCMJTAG) ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ ++ osl_readl((volatile uint32*)(r)) \ ++) +#define W_REG(r, v) do { \ + switch (sizeof(*(r))) { \ + case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ @@ -8123,6 +7349,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b + case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ + } \ +} while (0) ++#endif ++ +#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) +#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) +extern uint8 osl_readb(volatile uint8 *r); @@ -8137,12 +7365,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +extern int bcmp(const void *b1, const void *b2, int len); +extern void bzero(void *b, int len); + -+/* general purpose memory allocation */ -+#define MALLOC(size) osl_malloc((size)) -+#define MFREE(addr, size) osl_mfree((char*)(addr), (size)) -+extern void *osl_malloc(uint size); -+extern void osl_mfree(void *addr, uint size); -+ +/* uncached virtual address */ +#define OSL_UNCACHED(va) osl_uncached((va)) +extern void *osl_uncached(void *va); @@ -8161,83 +7383,74 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b +extern void *osl_reg_map(uint32 pa, uint size); +extern void osl_reg_unmap(void *va); + -+/* allocate/free shared (dma-able) consistent (uncached) memory */ -+#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ -+ osl_dma_alloc_consistent((dev), (size), (pap)) -+#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ -+ osl_dma_free_consistent((dev), (void*)(va), (size), (pa)) -+extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap); -+extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa); -+ -+/* map/unmap direction */ -+#define DMA_TX 1 -+#define DMA_RX 2 -+ -+/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(dev, va, size, direction, p) \ -+ osl_dma_map((dev), (va), (size), (direction)) -+#define DMA_UNMAP(dev, pa, size, direction, p) \ -+ osl_dma_unmap((dev), (pa), (size), (direction)) -+extern uint osl_dma_map(void *dev, void *va, uint size, int direction); -+extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction); -+ -+/* microsecond delay */ -+#define OSL_DELAY(usec) osl_delay((usec)) -+extern void osl_delay(uint usec); -+ +/* shared (dma-able) memory access macros */ +#define R_SM(r) *(r) +#define W_SM(r, v) (*(r) = (v)) +#define BZERO_SM(r, len) bzero((r), (len)) + +/* packet primitives */ -+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) -+#define PKTFREE(drv, skb, send) osl_pktfree((skb)) -+#define PKTDATA(drv, skb) osl_pktdata((drv), (skb)) -+#define PKTLEN(drv, skb) osl_pktlen((drv), (skb)) -+#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb)) ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) osl_pktdata((osh), (skb)) ++#define PKTLEN(osh, skb) osl_pktlen((osh), (skb)) ++#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb)) ++#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb)) ++#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb)) +#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) -+#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len)) -+#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes)) -+#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes)) -+#define PKTDUP(drv, skb) osl_pktdup((drv), (skb)) ++#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len)) ++#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes)) ++#define PKTDUP(osh, skb) osl_pktdup((osh), (skb)) +#define PKTCOOKIE(skb) osl_pktcookie((skb)) +#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) +#define PKTLINK(skb) osl_pktlink((skb)) +#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) -+extern void *osl_pktget(void *drv, uint len, bool send); ++#define PKTPRIO(skb) osl_pktprio((skb)) ++#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); +extern void osl_pktfree(void *skb); -+extern uchar *osl_pktdata(void *drv, void *skb); -+extern uint osl_pktlen(void *drv, void *skb); -+extern void *osl_pktnext(void *drv, void *skb); ++extern uchar *osl_pktdata(osl_t *osh, void *skb); ++extern uint osl_pktlen(osl_t *osh, void *skb); ++extern uint osl_pktheadroom(osl_t *osh, void *skb); ++extern uint osl_pkttailroom(osl_t *osh, void *skb); ++extern void *osl_pktnext(osl_t *osh, void *skb); +extern void osl_pktsetnext(void *skb, void *x); -+extern void osl_pktsetlen(void *drv, void *skb, uint len); -+extern uchar *osl_pktpush(void *drv, void *skb, int bytes); -+extern uchar *osl_pktpull(void *drv, void *skb, int bytes); -+extern void *osl_pktdup(void *drv, void *skb); ++extern void osl_pktsetlen(osl_t *osh, void *skb, uint len); ++extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes); ++extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes); ++extern void *osl_pktdup(osl_t *osh, void *skb); +extern void *osl_pktcookie(void *skb); +extern void osl_pktsetcookie(void *skb, void *x); +extern void *osl_pktlink(void *skb); +extern void osl_pktsetlink(void *skb, void *x); ++extern uint osl_pktprio(void *skb); ++extern void osl_pktsetprio(void *skb, uint x); + +#endif /* BINOSL */ + ++#define OSL_ERROR(bcmerror) osl_error(bcmerror) ++extern int osl_error(int bcmerror); ++ ++/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ ++#define PKTBUFSZ 2048 ++ +#endif /* _linux_osl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-08-28 11:12:20.441857480 +0200 -@@ -0,0 +1,326 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h +--- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2005-12-15 16:02:45.467929000 +0100 +@@ -0,0 +1,389 @@ +/* + * Linux-specific abstractions to gain some independence from linux kernel versions. -+ * Pave over some 2.2 versus 2.4 kernel differences. ++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * + * $Id$ + */ + @@ -8260,6 +7473,16 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-br +#include +#endif + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ++#include ++#endif ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") ++#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) ++#endif ++ +/* linux/malloc.h is deprecated, use linux/slab.h instead. */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) +#include @@ -8269,7 +7492,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-br + +#include +#include -+#include +#include +#include +#include @@ -8277,6 +7499,36 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-br +#include +#include + ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) ++#include ++#else ++#include ++#ifndef work_struct ++#define work_struct tq_struct ++#endif ++#ifndef INIT_WORK ++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) ++#endif ++#ifndef schedule_work ++#define schedule_work(_work) schedule_task((_work)) ++#endif ++#ifndef flush_scheduled_work ++#define flush_scheduled_work() flush_scheduled_tasks() ++#endif ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* Some distributions have their own 2.6.x compatibility layers */ ++#ifndef IRQ_NONE ++typedef void irqreturn_t; ++#define IRQ_NONE ++#define IRQ_HANDLED ++#define IRQ_RETVAL(x) ++#endif ++#else ++typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); ++#endif ++ +#ifndef __exit +#define __exit +#endif @@ -8505,152 +7757,668 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-br + +#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) ++ ++/* Power management related routines */ ++ ++static inline int ++pci_save_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_read_config_dword(dev, i * 4,&buffer[i]); ++ } ++ return 0; ++} ++ ++static inline int ++pci_restore_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_write_config_dword(dev,i * 4, buffer[i]); ++ } ++ /* ++ * otherwise, write the context information we know from bootup. ++ * This works around a problem where warm-booting from Windows ++ * combined with a D3(hot)->D0 transition causes PCI config ++ * header data to be forgotten. ++ */ ++ else { ++ for (i = 0; i < 6; i ++) ++ pci_write_config_dword(dev, ++ PCI_BASE_ADDRESS_0 + (i * 4), ++ pci_resource_start(dev, i)); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ } ++ return 0; ++} ++ ++#endif /* PCI power management */ ++ ++/* Old cp0 access macros deprecated in 2.4.19 */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) ++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) ++#endif ++ ++/* Module refcount handled internally in 2.6.x */ ++#ifndef SET_MODULE_OWNER ++#define SET_MODULE_OWNER(dev) do {} while (0) ++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT ++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT ++#else ++#define OLD_MOD_INC_USE_COUNT do {} while (0) ++#define OLD_MOD_DEC_USE_COUNT do {} while (0) ++#endif ++ ++#ifndef SET_NETDEV_DEV ++#define SET_NETDEV_DEV(net, pdev) do {} while (0) ++#endif ++ ++#ifndef HAVE_FREE_NETDEV ++#define free_netdev(dev) kfree(dev) ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* struct packet_type redefined in 2.6.x */ ++#define af_packet_priv data ++#endif ++ ++#endif /* _linuxver_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h +--- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2005-12-15 16:47:29.886633750 +0100 +@@ -0,0 +1,552 @@ ++/* ++ * HND Run Time Environment for standalone MIPS programs. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _MISPINC_H ++#define _MISPINC_H ++ ++ ++/* MIPS defines */ ++ ++#ifdef _LANGUAGE_ASSEMBLY ++ ++/* ++ * Symbolic register names for 32 bit ABI ++ */ ++#define zero $0 /* wired zero */ ++#define AT $1 /* assembler temp - uppercase because of ".set at" */ ++#define v0 $2 /* return value */ ++#define v1 $3 ++#define a0 $4 /* argument registers */ ++#define a1 $5 ++#define a2 $6 ++#define a3 $7 ++#define t0 $8 /* caller saved */ ++#define t1 $9 ++#define t2 $10 ++#define t3 $11 ++#define t4 $12 ++#define t5 $13 ++#define t6 $14 ++#define t7 $15 ++#define s0 $16 /* callee saved */ ++#define s1 $17 ++#define s2 $18 ++#define s3 $19 ++#define s4 $20 ++#define s5 $21 ++#define s6 $22 ++#define s7 $23 ++#define t8 $24 /* caller saved */ ++#define t9 $25 ++#define jp $25 /* PIC jump register */ ++#define k0 $26 /* kernel scratch */ ++#define k1 $27 ++#define gp $28 /* global pointer */ ++#define sp $29 /* stack pointer */ ++#define fp $30 /* frame pointer */ ++#define s8 $30 /* same like fp! */ ++#define ra $31 /* return address */ ++ ++ ++/* ++ * CP0 Registers ++ */ ++ ++#define C0_INX $0 ++#define C0_RAND $1 ++#define C0_TLBLO0 $2 ++#define C0_TLBLO C0_TLBLO0 ++#define C0_TLBLO1 $3 ++#define C0_CTEXT $4 ++#define C0_PGMASK $5 ++#define C0_WIRED $6 ++#define C0_BADVADDR $8 ++#define C0_COUNT $9 ++#define C0_TLBHI $10 ++#define C0_COMPARE $11 ++#define C0_SR $12 ++#define C0_STATUS C0_SR ++#define C0_CAUSE $13 ++#define C0_EPC $14 ++#define C0_PRID $15 ++#define C0_CONFIG $16 ++#define C0_LLADDR $17 ++#define C0_WATCHLO $18 ++#define C0_WATCHHI $19 ++#define C0_XCTEXT $20 ++#define C0_DIAGNOSTIC $22 ++#define C0_BROADCOM C0_DIAGNOSTIC ++#define C0_PERFORMANCE $25 ++#define C0_ECC $26 ++#define C0_CACHEERR $27 ++#define C0_TAGLO $28 ++#define C0_TAGHI $29 ++#define C0_ERREPC $30 ++#define C0_DESAVE $31 ++ ++/* ++ * LEAF - declare leaf routine ++ */ ++#define LEAF(symbol) \ ++ .globl symbol; \ ++ .align 2; \ ++ .type symbol,@function; \ ++ .ent symbol,0; \ ++symbol: .frame sp,0,ra ++ ++/* ++ * END - mark end of function ++ */ ++#define END(function) \ ++ .end function; \ ++ .size function,.-function ++ ++#define _ULCAST_ ++ ++#else ++ ++/* ++ * The following macros are especially useful for __asm__ ++ * inline assembler. ++ */ ++#ifndef __STR ++#define __STR(x) #x ++#endif ++#ifndef STR ++#define STR(x) __STR(x) ++#endif ++ ++#define _ULCAST_ (unsigned long) ++ ++ ++/* ++ * CP0 Registers ++ */ ++ ++#define C0_INX 0 /* CP0: TLB Index */ ++#define C0_RAND 1 /* CP0: TLB Random */ ++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ ++#define C0_CTEXT 4 /* CP0: Context */ ++#define C0_PGMASK 5 /* CP0: TLB PageMask */ ++#define C0_WIRED 6 /* CP0: TLB Wired */ ++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ ++#define C0_COUNT 9 /* CP0: Count */ ++#define C0_TLBHI 10 /* CP0: TLB EntryHi */ ++#define C0_COMPARE 11 /* CP0: Compare */ ++#define C0_SR 12 /* CP0: Processor Status */ ++#define C0_STATUS C0_SR /* CP0: Processor Status */ ++#define C0_CAUSE 13 /* CP0: Exception Cause */ ++#define C0_EPC 14 /* CP0: Exception PC */ ++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ ++#define C0_CONFIG 16 /* CP0: Config */ ++#define C0_LLADDR 17 /* CP0: LLAddr */ ++#define C0_WATCHLO 18 /* CP0: WatchpointLo */ ++#define C0_WATCHHI 19 /* CP0: WatchpointHi */ ++#define C0_XCTEXT 20 /* CP0: XContext */ ++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ ++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ ++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ ++#define C0_ECC 26 /* CP0: ECC */ ++#define C0_CACHEERR 27 /* CP0: CacheErr */ ++#define C0_TAGLO 28 /* CP0: TagLo */ ++#define C0_TAGHI 29 /* CP0: TagHi */ ++#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++#define C0_DESAVE 31 /* CP0: DebugSave */ ++ ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++/* ++ * Memory segments (32bit kernel mode addresses) ++ */ ++#undef KUSEG ++#undef KSEG0 ++#undef KSEG1 ++#undef KSEG2 ++#undef KSEG3 ++#define KUSEG 0x00000000 ++#define KSEG0 0x80000000 ++#define KSEG1 0xa0000000 ++#define KSEG2 0xc0000000 ++#define KSEG3 0xe0000000 ++#define PHYSADDR_MASK 0x1fffffff ++ ++/* ++ * Map an address to a certain kernel segment ++ */ ++#undef PHYSADDR ++#undef KSEG0ADDR ++#undef KSEG1ADDR ++#undef KSEG2ADDR ++#undef KSEG3ADDR ++ ++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) ++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) ++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) ++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) ++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) ++ ++ ++#ifndef Index_Invalidate_I ++/* ++ * Cache Operations ++ */ ++#define Index_Invalidate_I 0x00 ++#define Index_Writeback_Inv_D 0x01 ++#define Index_Invalidate_SI 0x02 ++#define Index_Writeback_Inv_SD 0x03 ++#define Index_Load_Tag_I 0x04 ++#define Index_Load_Tag_D 0x05 ++#define Index_Load_Tag_SI 0x06 ++#define Index_Load_Tag_SD 0x07 ++#define Index_Store_Tag_I 0x08 ++#define Index_Store_Tag_D 0x09 ++#define Index_Store_Tag_SI 0x0A ++#define Index_Store_Tag_SD 0x0B ++#define Create_Dirty_Excl_D 0x0d ++#define Create_Dirty_Excl_SD 0x0f ++#define Hit_Invalidate_I 0x10 ++#define Hit_Invalidate_D 0x11 ++#define Hit_Invalidate_SI 0x12 ++#define Hit_Invalidate_SD 0x13 ++#define Fill_I 0x14 ++#define Hit_Writeback_Inv_D 0x15 ++ /* 0x16 is unused */ ++#define Hit_Writeback_Inv_SD 0x17 ++#define R5K_Page_Invalidate_S 0x17 ++#define Hit_Writeback_I 0x18 ++#define Hit_Writeback_D 0x19 ++ /* 0x1a is unused */ ++#define Hit_Writeback_SD 0x1b ++ /* 0x1c is unused */ ++ /* 0x1e is unused */ ++#define Hit_Set_Virtual_SI 0x1e ++#define Hit_Set_Virtual_SD 0x1f ++#endif ++ ++ ++/* ++ * R4x00 interrupt enable / cause bits ++ */ ++#define IE_SW0 (_ULCAST_(1) << 8) ++#define IE_SW1 (_ULCAST_(1) << 9) ++#define IE_IRQ0 (_ULCAST_(1) << 10) ++#define IE_IRQ1 (_ULCAST_(1) << 11) ++#define IE_IRQ2 (_ULCAST_(1) << 12) ++#define IE_IRQ3 (_ULCAST_(1) << 13) ++#define IE_IRQ4 (_ULCAST_(1) << 14) ++#define IE_IRQ5 (_ULCAST_(1) << 15) ++ ++#ifndef ST0_UM ++/* ++ * Bitfields in the mips32 cp0 status register ++ */ ++#define ST0_IE 0x00000001 ++#define ST0_EXL 0x00000002 ++#define ST0_ERL 0x00000004 ++#define ST0_UM 0x00000010 ++#define ST0_SWINT0 0x00000100 ++#define ST0_SWINT1 0x00000200 ++#define ST0_HWINT0 0x00000400 ++#define ST0_HWINT1 0x00000800 ++#define ST0_HWINT2 0x00001000 ++#define ST0_HWINT3 0x00002000 ++#define ST0_HWINT4 0x00004000 ++#define ST0_HWINT5 0x00008000 ++#define ST0_IM 0x0000ff00 ++#define ST0_NMI 0x00080000 ++#define ST0_SR 0x00100000 ++#define ST0_TS 0x00200000 ++#define ST0_BEV 0x00400000 ++#define ST0_RE 0x02000000 ++#define ST0_RP 0x08000000 ++#define ST0_CU 0xf0000000 ++#define ST0_CU0 0x10000000 ++#define ST0_CU1 0x20000000 ++#define ST0_CU2 0x40000000 ++#define ST0_CU3 0x80000000 ++#endif ++ + -+/* Power management related routines */ ++/* ++ * Bitfields in the mips32 cp0 cause register ++ */ ++#define C_EXC 0x0000007c ++#define C_EXC_SHIFT 2 ++#define C_INT 0x0000ff00 ++#define C_INT_SHIFT 8 ++#define C_SW0 (_ULCAST_(1) << 8) ++#define C_SW1 (_ULCAST_(1) << 9) ++#define C_IRQ0 (_ULCAST_(1) << 10) ++#define C_IRQ1 (_ULCAST_(1) << 11) ++#define C_IRQ2 (_ULCAST_(1) << 12) ++#define C_IRQ3 (_ULCAST_(1) << 13) ++#define C_IRQ4 (_ULCAST_(1) << 14) ++#define C_IRQ5 (_ULCAST_(1) << 15) ++#define C_WP 0x00400000 ++#define C_IV 0x00800000 ++#define C_CE 0x30000000 ++#define C_CE_SHIFT 28 ++#define C_BD 0x80000000 ++ ++/* Values in C_EXC */ ++#define EXC_INT 0 ++#define EXC_TLBM 1 ++#define EXC_TLBL 2 ++#define EXC_TLBS 3 ++#define EXC_AEL 4 ++#define EXC_AES 5 ++#define EXC_IBE 6 ++#define EXC_DBE 7 ++#define EXC_SYS 8 ++#define EXC_BPT 9 ++#define EXC_RI 10 ++#define EXC_CU 11 ++#define EXC_OV 12 ++#define EXC_TR 13 ++#define EXC_WATCH 23 ++#define EXC_MCHK 24 ++ ++ ++/* ++ * Bits in the cp0 config register. ++ */ ++#define CONF_CM_CACHABLE_NO_WA 0 ++#define CONF_CM_CACHABLE_WA 1 ++#define CONF_CM_UNCACHED 2 ++#define CONF_CM_CACHABLE_NONCOHERENT 3 ++#define CONF_CM_CACHABLE_CE 4 ++#define CONF_CM_CACHABLE_COW 5 ++#define CONF_CM_CACHABLE_CUW 6 ++#define CONF_CM_CACHABLE_ACCELERATED 7 ++#define CONF_CM_CMASK 7 ++#define CONF_CU (_ULCAST_(1) << 3) ++#define CONF_DB (_ULCAST_(1) << 4) ++#define CONF_IB (_ULCAST_(1) << 5) ++#define CONF_SE (_ULCAST_(1) << 12) ++#define CONF_SC (_ULCAST_(1) << 17) ++#define CONF_AC (_ULCAST_(1) << 23) ++#define CONF_HALT (_ULCAST_(1) << 25) ++ ++ ++/* ++ * Bits in the cp0 config register select 1. ++ */ ++#define CONF1_FP 0x00000001 /* FPU present */ ++#define CONF1_EP 0x00000002 /* EJTAG present */ ++#define CONF1_CA 0x00000004 /* mips16 implemented */ ++#define CONF1_WR 0x00000008 /* Watch registers present */ ++#define CONF1_PC 0x00000010 /* Performance counters present */ ++#define CONF1_DA_SHIFT 7 /* D$ associativity */ ++#define CONF1_DA_MASK 0x00000380 ++#define CONF1_DA_BASE 1 ++#define CONF1_DL_SHIFT 10 /* D$ line size */ ++#define CONF1_DL_MASK 0x00001c00 ++#define CONF1_DL_BASE 2 ++#define CONF1_DS_SHIFT 13 /* D$ sets/way */ ++#define CONF1_DS_MASK 0x0000e000 ++#define CONF1_DS_BASE 64 ++#define CONF1_IA_SHIFT 16 /* I$ associativity */ ++#define CONF1_IA_MASK 0x00070000 ++#define CONF1_IA_BASE 1 ++#define CONF1_IL_SHIFT 19 /* I$ line size */ ++#define CONF1_IL_MASK 0x00380000 ++#define CONF1_IL_BASE 2 ++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ ++#define CONF1_IS_MASK 0x01c00000 ++#define CONF1_IS_BASE 64 ++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ ++#define CONF1_MS_SHIFT 25 ++ ++/* PRID register */ ++#define PRID_COPT_MASK 0xff000000 ++#define PRID_COMP_MASK 0x00ff0000 ++#define PRID_IMP_MASK 0x0000ff00 ++#define PRID_REV_MASK 0x000000ff ++ ++#define PRID_COMP_LEGACY 0x000000 ++#define PRID_COMP_MIPS 0x010000 ++#define PRID_COMP_BROADCOM 0x020000 ++#define PRID_COMP_ALCHEMY 0x030000 ++#define PRID_COMP_SIBYTE 0x040000 ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++#define PRID_IMP_BCM3303 0x9100 ++ ++#define PRID_IMP_UNKNOWN 0xff00 ++ ++#define BCM330X(id) \ ++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ ++ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) ++ ++/* Bits in C0_BROADCOM */ ++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ ++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ ++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ ++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ ++ ++/* PreFetch Cache aka Read Ahead Cache */ ++ ++#define PFC_CR0 0xff400000 /* control reg 0 */ ++#define PFC_CR1 0xff400004 /* control reg 1 */ ++ ++/* PFC operations */ ++#define PFC_I 0x00000001 /* Enable PFC use for instructions */ ++#define PFC_D 0x00000002 /* Enable PFC use for data */ ++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ ++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ ++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ ++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ ++#define PFC_DPF 0x00000040 /* Enable directional prefetching */ ++#define PFC_FLUSH 0x00000100 /* Flush the PFC */ ++#define PFC_BRR 0x40000000 /* Bus error indication */ ++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ ++ ++/* Handy defaults */ ++#define PFC_DISABLED 0 ++#define PFC_AUTO 0xffffffff /* auto select the default mode */ ++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) ++#define PFC_INST_NOPF (PFC_I | PFC_CINV) ++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) ++#define PFC_DATA_NOPF (PFC_D | PFC_CINV) ++#define PFC_I_AND_D (PFC_INST | PFC_DATA) ++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) + -+static inline int -+pci_save_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_read_config_dword(dev, i * 4,&buffer[i]); -+ } -+ return 0; -+} + -+static inline int -+pci_restore_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; ++/* ++ * These are the UART port assignments, expressed as offsets from the base ++ * register. These assignments should hold for any serial port based on ++ * a 8250, 16450, or 16550(A). ++ */ + -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_write_config_dword(dev,i * 4, buffer[i]); -+ } -+ /* -+ * otherwise, write the context information we know from bootup. -+ * This works around a problem where warm-booting from Windows -+ * combined with a D3(hot)->D0 transition causes PCI config -+ * header data to be forgotten. -+ */ -+ else { -+ for (i = 0; i < 6; i ++) -+ pci_write_config_dword(dev, -+ PCI_BASE_ADDRESS_0 + (i * 4), -+ pci_resource_start(dev, i)); -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ } -+ return 0; -+} ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_RXRDY 0x01 /* Receiver ready */ + -+#endif /* PCI power management */ + -+/* Old cp0 access macros deprecated in 2.4.19 */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) -+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) -+#endif ++#ifndef _LANGUAGE_ASSEMBLY + -+#endif /* _linuxver_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h 2005-08-28 11:12:20.441857480 +0200 -@@ -0,0 +1,62 @@ +/* -+ * Broadcom Home Gateway Reference Design -+ * Ports Web Page Configuration Support Routines -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Macros to access the system control coprocessor + */ + -+#ifndef _nvports_h_ -+#define _nvports_h_ -+ -+#define uint32 unsigned long -+#define uint16 unsigned short -+#define uint unsigned int -+#define uint8 unsigned char -+#define uint64 unsigned long long -+ -+enum FORCE_PORT { -+ FORCE_OFF, -+ FORCE_10H, -+ FORCE_10F, -+ FORCE_100H, -+ FORCE_100F, -+ FORCE_DOWN, -+ POWER_OFF -+}; -+ -+typedef struct _PORT_ATTRIBS -+{ -+ uint autoneg; -+ uint force; -+ uint native; -+} PORT_ATTRIBS; ++#define MFC0(source, sel) \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ ++ "move\t%0,$1\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res) \ ++ : \ ++ :"$1"); \ ++ __res; \ ++}) + -+extern uint -+nvExistsPortAttrib(char *attrib, uint portno); ++#define MTC0(source, sel, value) \ ++do { \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "move\t$1,%z0\n\t" \ ++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ : \ ++ :"jr" (value) \ ++ :"$1"); \ ++} while (0) + -+extern int -+nvExistsAnyForcePortAttrib(uint portno); ++#define get_c0_count() \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "mfc0\t%0,$9\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res)); \ ++ __res; \ ++}) + -+extern void -+nvSetPortAttrib(char *attrib, uint portno); ++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; + -+extern void -+nvUnsetPortAttrib(char *attrib, uint portno); ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) ++ lsz = CONF1_IL_BASE << lsz; ++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); ++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} + -+extern void -+nvUnsetAllForcePortAttrib(uint portno); ++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; + -+extern PORT_ATTRIBS -+nvGetSwitchPortAttribs(uint portno); ++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) ++ lsz = CONF1_DL_BASE << lsz; ++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); ++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} + -+#endif /* _nvports_h_ */ ++#define cache_op(base, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, (%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + ++#define cache_unroll4(base, delta, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1,0(%0); \ ++ cache %1,delta(%0); \ ++ cache %1,(2 * delta)(%0); \ ++ cache %1,(3 * delta)(%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + ++#endif /* !_LANGUAGE_ASSEMBLY */ + -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h 2005-08-28 11:12:20.441857480 +0200 -@@ -0,0 +1,38 @@ ++#endif /* _MISPINC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h +--- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2005-12-15 15:35:08.321801750 +0100 +@@ -0,0 +1,42 @@ +/* -+ * OS Independent Layer ++ * OS Abstraction Layer + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _osl_h_ +#define _osl_h_ + -+#ifdef V2_HAL -+#include -+#elif defined(linux) ++/* osl handle type forward declaration */ ++typedef struct os_handle osl_t; ++ ++#if defined(linux) +#include -+#elif PMON -+#include +#elif defined(NDIS) +#include +#elif defined(_CFE_) +#include -+#elif defined(MACOS9) -+#include ++#elif defined(_HNDRTE_) ++#include ++#elif defined(_MINOSL_) ++#include ++#elif PMON ++#include +#elif defined(MACOSX) +#include +#else @@ -8659,16 +8427,17 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/ar + +/* handy */ +#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) ++#define MAXPRIO 7 /* 0-7 */ + +#endif /* _osl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-08-28 11:12:20.442857328 +0200 -@@ -0,0 +1,362 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h +--- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2005-12-15 15:36:31.719013750 +0100 +@@ -0,0 +1,398 @@ +/* + * pcicfg.h: PCI configuration constants and structures. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -8706,7 +8475,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm +#define PCICFG_BUS_SHIFT 16 /* Bus shift */ +#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ +#define PCICFG_FUN_SHIFT 8 /* Function shift */ -+#define PCICFG_OFF_SHIFT 0 /* Bus shift */ ++#define PCICFG_OFF_SHIFT 0 /* Register shift */ + +#define PCICFG_BUS_MASK 0xff /* Bus mask */ +#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ @@ -8724,7 +8493,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm +#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) +#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) + -+ +/* The actual config space */ + +#define PCI_BAR_MAX 6 @@ -8733,6 +8501,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm + +#define PCR_RSVDA_MAX 2 + ++/* pci config status reg has a bit to indicate that capability ptr is present*/ ++ ++#define PCI_CAPPTR_PRESENT 0x0010 ++ +typedef struct _pci_config_regs { + unsigned short vendor; + unsigned short device; @@ -8788,6 +8560,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm +#define PCI_CFG_SVID 0x2c +#define PCI_CFG_SSID 0x2e +#define PCI_CFG_ROMBAR 0x30 ++#define PCI_CFG_CAPPTR 0x34 +#define PCI_CFG_INT 0x3c +#define PCI_CFG_PIN 0x3d +#define PCI_CFG_MINGNT 0x3e @@ -8996,7 +8769,32 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm + unsigned char dev_dep[192]; +} ppb_config_regs; + -+/* Eveything below is BRCM HND proprietary */ ++ ++/* PCI CAPABILITY DEFINES */ ++#define PCI_CAP_POWERMGMTCAP_ID 0x01 ++#define PCI_CAP_MSICAP_ID 0x05 ++ ++/* Data structure to define the Message Signalled Interrupt facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_msi { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short msgctrl; ++ unsigned int msgaddr; ++} pciconfig_cap_msi; ++ ++/* Data structure to define the Power managment facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_pwrmgmt { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pme_cap; ++ unsigned short pme_sts_ctrl; ++ unsigned char pme_bridge_ext; ++ unsigned char data; ++} pciconfig_cap_pwrmgmt; ++ ++/* Everything below is BRCM HND proprietary */ + +#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ +#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ @@ -9014,9 +8812,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm +#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ +#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ + ++/* PCI_INT_STATUS */ ++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ ++ +/* PCI_INT_MASK */ +#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ +#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ ++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ + +/* PCI_SPROM_CONTROL */ +#define SPROM_BLANK 0x04 /* indicating a blank sprom */ @@ -9026,693 +8828,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm +#define SPROM_SIZE 256 /* sprom size in 16-bit */ +#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ + -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-08-28 11:12:20.450856112 +0200 -@@ -0,0 +1,679 @@ -+/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Fundamental types and constants relating to 802.11 -+ * -+ * $Id$ -+ */ -+ -+#ifndef _802_11_H_ -+#define _802_11_H_ -+ -+#ifndef _TYPEDEFS_H_ -+#include -+#endif -+ -+#ifndef _NET_ETHERNET_H_ -+#include -+#endif -+ -+/* enable structure packing */ -+#if !defined(__GNUC__) -+#pragma pack(1) -+#endif -+ -+/* some platforms require stronger medicine */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#define PACKED -+#endif -+ -+ -+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ -+ -+/* Generic 802.11 frame constants */ -+#define DOT11_A3_HDR_LEN 24 -+#define DOT11_A4_HDR_LEN 30 -+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN -+#define DOT11_FCS_LEN 4 -+#define DOT11_ICV_LEN 4 -+#define DOT11_ICV_AES_LEN 8 -+ -+ -+#define DOT11_KEY_INDEX_SHIFT 6 -+#define DOT11_IV_LEN 4 -+#define DOT11_IV_TKIP_LEN 8 -+#define DOT11_IV_AES_OCB_LEN 4 -+#define DOT11_IV_AES_CCM_LEN 8 -+ -+#define DOT11_MAX_MPDU_BODY_LEN 2312 -+#define DOT11_MAX_MPDU_LEN 2346 /* body len + A4 hdr + FCS */ -+#define DOT11_MAX_SSID_LEN 32 -+ -+/* dot11RTSThreshold */ -+#define DOT11_DEFAULT_RTS_LEN 2347 -+#define DOT11_MAX_RTS_LEN 2347 -+ -+/* dot11FragmentationThreshold */ -+#define DOT11_MIN_FRAG_LEN 256 -+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ -+#define DOT11_DEFAULT_FRAG_LEN 2346 -+ -+/* dot11BeaconPeriod */ -+#define DOT11_MIN_BEACON_PERIOD 1 -+#define DOT11_MAX_BEACON_PERIOD 0xFFFF -+ -+/* dot11DTIMPeriod */ -+#define DOT11_MIN_DTIM_PERIOD 1 -+#define DOT11_MAX_DTIM_PERIOD 0xFF -+ -+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ -+#define DOT11_LLC_SNAP_HDR_LEN 8 -+#define DOT11_OUI_LEN 3 -+struct dot11_llc_snap_header { -+ uint8 dsap; /* always 0xAA */ -+ uint8 ssap; /* always 0xAA */ -+ uint8 ctl; /* always 0x03 */ -+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 -+ Bridge-Tunnel: 0x00 0x00 0xF8 */ -+ uint16 type; /* ethertype */ -+} PACKED; -+ -+/* RFC1042 header used by 802.11 per 802.1H */ -+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) -+ -+/* Generic 802.11 MAC header */ -+/* -+ * N.B.: This struct reflects the full 4 address 802.11 MAC header. -+ * The fields are defined such that the shorter 1, 2, and 3 -+ * address headers just use the first k fields. -+ */ -+struct dot11_header { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr a1; /* address 1 */ -+ struct ether_addr a2; /* address 2 */ -+ struct ether_addr a3; /* address 3 */ -+ uint16 seq; /* sequence control */ -+ struct ether_addr a4; /* address 4 */ -+} PACKED; -+ -+/* Control frames */ -+ -+struct dot11_rts_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+ struct ether_addr ta; /* transmitter address */ -+} PACKED; -+#define DOT11_RTS_LEN 16 -+ -+struct dot11_cts_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+} PACKED; -+#define DOT11_CTS_LEN 10 -+ -+struct dot11_ack_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+} PACKED; -+#define DOT11_ACK_LEN 10 -+ -+struct dot11_ps_poll_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* AID */ -+ struct ether_addr bssid; /* receiver address, STA in AP */ -+ struct ether_addr ta; /* transmitter address */ -+} PACKED; -+#define DOT11_PS_POLL_LEN 16 -+ -+struct dot11_cf_end_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+ struct ether_addr bssid; /* transmitter address, STA in AP */ -+} PACKED; -+#define DOT11_CS_END_LEN 16 -+ -+/* Management frame header */ -+struct dot11_management_header { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr da; /* receiver address */ -+ struct ether_addr sa; /* transmitter address */ -+ struct ether_addr bssid; /* BSS ID */ -+ uint16 seq; /* sequence control */ -+} PACKED; -+#define DOT11_MGMT_HDR_LEN 24 -+ -+/* Management frame payloads */ -+ -+struct dot11_bcn_prb { -+ uint32 timestamp[2]; -+ uint16 beacon_interval; -+ uint16 capability; -+} PACKED; -+#define DOT11_BCN_PRB_LEN 12 -+ -+struct dot11_auth { -+ uint16 alg; /* algorithm */ -+ uint16 seq; /* sequence control */ -+ uint16 status; /* status code */ -+} PACKED; -+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ -+ -+struct dot11_assoc_req { -+ uint16 capability; /* capability information */ -+ uint16 listen; /* listen interval */ -+} PACKED; -+ -+struct dot11_assoc_resp { -+ uint16 capability; /* capability information */ -+ uint16 status; /* status code */ -+ uint16 aid; /* association ID */ -+} PACKED; -+ -+struct dot11_action_measure { -+ uint8 category; -+ uint8 action; -+ uint8 token; -+ uint8 data[1]; -+} PACKED; -+#define DOT11_ACTION_MEASURE_LEN 3 -+ -+/************** -+ 802.11h related definitions. -+**************/ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 power; -+} dot11_power_cnst_t; -+ -+typedef struct { -+ uint8 min; -+ uint8 max; -+} dot11_power_cap_t; -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 tx_pwr; -+ uint8 margin; -+} dot11_tpc_rep_t; -+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 first_channel; -+ uint8 num_channels; -+} dot11_supp_channels_t; -+ -+struct dot11_channel_switch { -+ uint8 id; -+ uint8 len; -+ uint8 mode; -+ uint8 channel; -+ uint8 count; -+} PACKED; -+typedef struct dot11_channel_switch dot11_channel_switch_t; -+ -+/* 802.11h Measurement Request/Report IEs */ -+/* Measurement Type field */ -+#define DOT11_MEASURE_TYPE_BASIC 0 -+#define DOT11_MEASURE_TYPE_CCA 1 -+#define DOT11_MEASURE_TYPE_RPI 2 -+ -+/* Measurement Mode field */ -+ -+/* Measurement Request Modes */ -+#define DOT11_MEASURE_MODE_ENABLE (1<<1) -+#define DOT11_MEASURE_MODE_REQUEST (1<<2) -+#define DOT11_MEASURE_MODE_REPORT (1<<3) -+/* Measurement Report Modes */ -+#define DOT11_MEASURE_MODE_LATE (1<<0) -+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) -+#define DOT11_MEASURE_MODE_REFUSED (1<<2) -+/* Basic Measurement Map bits */ -+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) -+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) -+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) -+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) -+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 token; -+ uint8 mode; -+ uint8 type; -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+} dot11_meas_req_t; -+#define DOT11_MNG_IE_MREQ_LEN 14 -+/* length of Measure Request IE data not including variable len */ -+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 -+ -+struct dot11_meas_rep { -+ uint8 id; -+ uint8 len; -+ uint8 token; -+ uint8 mode; -+ uint8 type; -+ union -+ { -+ struct { -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+ uint8 map; -+ } PACKED basic; -+ uint8 data[1]; -+ } PACKED rep; -+} PACKED; -+typedef struct dot11_meas_rep dot11_meas_rep_t; -+ -+/* length of Measure Report IE data not including variable len */ -+#define DOT11_MNG_IE_MREP_FIXED_LEN 3 -+ -+struct dot11_meas_rep_basic { -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+ uint8 map; -+} PACKED; -+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; -+#define DOT11_MEASURE_BASIC_REP_LEN 12 -+ -+struct dot11_quiet { -+ uint8 id; -+ uint8 len; -+ uint8 count; /* TBTTs until beacon interval in quiet starts */ -+ uint8 period; /* Beacon intervals between periodic quiet periods ? */ -+ uint16 duration;/* Length of quiet period, in TU's */ -+ uint16 offset; /* TU's offset from TBTT in Count field */ -+} PACKED; -+typedef struct dot11_quiet dot11_quiet_t; -+ -+typedef struct { -+ uint8 channel; -+ uint8 map; -+} chan_map_tuple_t; -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 eaddr[ETHER_ADDR_LEN]; -+ uint8 interval; -+ chan_map_tuple_t map[1]; -+} dot11_ibss_dfs_t; -+ -+ -+/* Macro to take a pointer to a beacon or probe response -+ * header and return the char* pointer to the SSID info element -+ */ -+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) -+ -+/* Authentication frame payload constants */ -+#define DOT11_OPEN_SYSTEM 0 -+#define DOT11_SHARED_KEY 1 -+#define DOT11_CHALLENGE_LEN 128 -+ -+/* Frame control macros */ -+#define FC_PVER_MASK 0x3 -+#define FC_PVER_SHIFT 0 -+#define FC_TYPE_MASK 0xC -+#define FC_TYPE_SHIFT 2 -+#define FC_SUBTYPE_MASK 0xF0 -+#define FC_SUBTYPE_SHIFT 4 -+#define FC_TODS 0x100 -+#define FC_TODS_SHIFT 8 -+#define FC_FROMDS 0x200 -+#define FC_FROMDS_SHIFT 9 -+#define FC_MOREFRAG 0x400 -+#define FC_MOREFRAG_SHIFT 10 -+#define FC_RETRY 0x800 -+#define FC_RETRY_SHIFT 11 -+#define FC_PM 0x1000 -+#define FC_PM_SHIFT 12 -+#define FC_MOREDATA 0x2000 -+#define FC_MOREDATA_SHIFT 13 -+#define FC_WEP 0x4000 -+#define FC_WEP_SHIFT 14 -+#define FC_ORDER 0x8000 -+#define FC_ORDER_SHIFT 15 -+ -+/* sequence control macros */ -+#define SEQNUM_SHIFT 4 -+#define FRAGNUM_MASK 0xF -+ -+/* Frame Control type/subtype defs */ -+ -+/* FC Types */ -+#define FC_TYPE_MNG 0 -+#define FC_TYPE_CTL 1 -+#define FC_TYPE_DATA 2 -+ -+/* Management Subtypes */ -+#define FC_SUBTYPE_ASSOC_REQ 0 -+#define FC_SUBTYPE_ASSOC_RESP 1 -+#define FC_SUBTYPE_REASSOC_REQ 2 -+#define FC_SUBTYPE_REASSOC_RESP 3 -+#define FC_SUBTYPE_PROBE_REQ 4 -+#define FC_SUBTYPE_PROBE_RESP 5 -+#define FC_SUBTYPE_BEACON 8 -+#define FC_SUBTYPE_ATIM 9 -+#define FC_SUBTYPE_DISASSOC 10 -+#define FC_SUBTYPE_AUTH 11 -+#define FC_SUBTYPE_DEAUTH 12 -+#define FC_SUBTYPE_ACTION 13 -+ -+/* Control Subtypes */ -+#define FC_SUBTYPE_PS_POLL 10 -+#define FC_SUBTYPE_RTS 11 -+#define FC_SUBTYPE_CTS 12 -+#define FC_SUBTYPE_ACK 13 -+#define FC_SUBTYPE_CF_END 14 -+#define FC_SUBTYPE_CF_END_ACK 15 -+ -+/* Data Subtypes */ -+#define FC_SUBTYPE_DATA 0 -+#define FC_SUBTYPE_DATA_CF_ACK 1 -+#define FC_SUBTYPE_DATA_CF_POLL 2 -+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 -+#define FC_SUBTYPE_NULL 4 -+#define FC_SUBTYPE_CF_ACK 5 -+#define FC_SUBTYPE_CF_POLL 6 -+#define FC_SUBTYPE_CF_ACK_POLL 7 -+ -+/* type-subtype combos */ -+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) -+ -+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) -+ -+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) -+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) -+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) -+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) -+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) -+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) -+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) -+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) -+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) -+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) -+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) -+ -+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) -+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) -+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) -+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) -+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) -+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) -+ -+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) -+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) -+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) -+ -+/* Management Frames */ -+ -+/* Management Frame Constants */ -+ -+/* Fixed fields */ -+#define DOT11_MNG_AUTH_ALGO_LEN 2 -+#define DOT11_MNG_AUTH_SEQ_LEN 2 -+#define DOT11_MNG_BEACON_INT_LEN 2 -+#define DOT11_MNG_CAP_LEN 2 -+#define DOT11_MNG_AP_ADDR_LEN 6 -+#define DOT11_MNG_LISTEN_INT_LEN 2 -+#define DOT11_MNG_REASON_LEN 2 -+#define DOT11_MNG_AID_LEN 2 -+#define DOT11_MNG_STATUS_LEN 2 -+#define DOT11_MNG_TIMESTAMP_LEN 8 -+ -+/* DUR/ID field in assoc resp is 0xc000 | AID */ -+#define DOT11_AID_MASK 0x3fff -+ -+/* Reason Codes */ -+#define DOT11_RC_RESERVED 0 -+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ -+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ -+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is -+ leaving (or has left) IBSS or ESS */ -+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ -+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle -+ all currently associated stations */ -+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from -+ nonauthenticated station */ -+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from -+ nonassociated station */ -+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is -+ leaving (or has left) BSS */ -+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is -+ not authenticated with responding station */ -+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ -+ -+/* Status Codes */ -+#define DOT11_STATUS_SUCCESS 0 /* Successful */ -+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ -+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities -+ in the Capability Information field */ -+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to -+ confirm that association exists */ -+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside -+ the scope of this standard */ -+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the -+ specified authentication algorithm */ -+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with -+ authentication transaction sequence number -+ out of expected sequence */ -+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ -+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting -+ for next frame in sequence */ -+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to -+ handle additional associated stations */ -+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station -+ not supporting all of the data rates in the -+ BSSBasicRateSet parameter */ -+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station -+ not supporting the Short Preamble option */ -+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station -+ not supporting the PBCC Modulation option */ -+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station -+ not supporting the Channel Agility option */ -+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management -+ capability is required. */ -+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the -+ Power Cap element is unacceptable. */ -+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the -+ Supported Channel element is unacceptable */ -+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station -+ not supporting the Short Slot Time option */ -+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station -+ not supporting the ER-PBCC Modulation option */ -+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station -+ not supporting the DSS-OFDM option */ -+ -+/* Info Elts, length of INFORMATION portion of Info Elts */ -+#define DOT11_MNG_DS_PARAM_LEN 1 -+#define DOT11_MNG_IBSS_PARAM_LEN 2 -+ -+/* TIM Info element has 3 bytes fixed info in INFORMATION field, -+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */ -+#define DOT11_MNG_TIM_FIXED_LEN 3 -+#define DOT11_MNG_TIM_DTIM_COUNT 0 -+#define DOT11_MNG_TIM_DTIM_PERIOD 1 -+#define DOT11_MNG_TIM_BITMAP_CTL 2 -+#define DOT11_MNG_TIM_PVB 3 -+ -+/* TLV defines */ -+#define TLV_TAG_OFF 0 -+#define TLV_LEN_OFF 1 -+#define TLV_HDR_LEN 2 -+#define TLV_BODY_OFF 2 -+ -+/* Management Frame Information Element IDs */ -+#define DOT11_MNG_SSID_ID 0 -+#define DOT11_MNG_RATES_ID 1 -+#define DOT11_MNG_FH_PARMS_ID 2 -+#define DOT11_MNG_DS_PARMS_ID 3 -+#define DOT11_MNG_CF_PARMS_ID 4 -+#define DOT11_MNG_TIM_ID 5 -+#define DOT11_MNG_IBSS_PARMS_ID 6 -+#define DOT11_MNG_COUNTRY_ID 7 -+#define DOT11_MNG_HOPPING_PARMS_ID 8 -+#define DOT11_MNG_HOPPING_TABLE_ID 9 -+#define DOT11_MNG_REQUEST_ID 10 -+#define DOT11_MNG_CHALLENGE_ID 16 -+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ -+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ -+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ -+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ -+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ -+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ -+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ -+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ -+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ -+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ -+#define DOT11_MNG_ERP_ID 42 -+#define DOT11_MNG_NONERP_ID 47 -+#define DOT11_MNG_EXT_RATES_ID 50 -+#define DOT11_MNG_WPA_ID 221 -+#define DOT11_MNG_PROPR_ID 221 -+ -+/* ERP info element bit values */ -+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ -+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ -+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ -+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ -+ -+/* Capability Information Field */ -+#define DOT11_CAP_ESS 0x0001 -+#define DOT11_CAP_IBSS 0x0002 -+#define DOT11_CAP_POLLABLE 0x0004 -+#define DOT11_CAP_POLL_RQ 0x0008 -+#define DOT11_CAP_PRIVACY 0x0010 -+#define DOT11_CAP_SHORT 0x0020 -+#define DOT11_CAP_PBCC 0x0040 -+#define DOT11_CAP_AGILITY 0x0080 -+#define DOT11_CAP_SPECTRUM 0x0100 -+#define DOT11_CAP_SHORTSLOT 0x0400 -+#define DOT11_CAP_CCK_OFDM 0x2000 -+ -+/* Action Frame Constants */ -+#define DOT11_ACTION_CAT_ERR_MASK 0x10 -+#define DOT11_ACTION_CAT_SPECT_MNG 0x00 -+ -+#define DOT11_ACTION_ID_M_REQ 0 -+#define DOT11_ACTION_ID_M_REP 1 -+#define DOT11_ACTION_ID_TPC_REQ 2 -+#define DOT11_ACTION_ID_TPC_REP 3 -+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 -+ -+/* MLME Enumerations */ -+#define DOT11_BSSTYPE_INFRASTRUCTURE 0 -+#define DOT11_BSSTYPE_INDEPENDENT 1 -+#define DOT11_BSSTYPE_ANY 2 -+#define DOT11_SCANTYPE_ACTIVE 0 -+#define DOT11_SCANTYPE_PASSIVE 1 -+ -+/* 802.11 A PHY constants */ -+#define APHY_SLOT_TIME 9 -+#define APHY_SIFS_TIME 16 -+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) -+#define APHY_PREAMBLE_TIME 16 -+#define APHY_SIGNAL_TIME 4 -+#define APHY_SYMBOL_TIME 4 -+#define APHY_SERVICE_NBITS 16 -+#define APHY_TAIL_NBITS 6 -+#define APHY_CWMIN 15 -+ -+/* 802.11 B PHY constants */ -+#define BPHY_SLOT_TIME 20 -+#define BPHY_SIFS_TIME 10 -+#define BPHY_DIFS_TIME 50 -+#define BPHY_PLCP_TIME 192 -+#define BPHY_PLCP_SHORT_TIME 96 -+#define BPHY_CWMIN 31 -+ -+/* 802.11 G constants */ -+#define DOT11_OFDM_SIGNAL_EXTENSION 6 -+ -+#define PHY_CWMAX 1023 -+ -+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ -+ -+/* dot11Counters Table - 802.11 spec., Annex D */ -+typedef struct d11cnt { -+ uint32 txfrag; /* dot11TransmittedFragmentCount */ -+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ -+ uint32 txfail; /* dot11FailedCount */ -+ uint32 txretry; /* dot11RetryCount */ -+ uint32 txretrie; /* dot11MultipleRetryCount */ -+ uint32 rxdup; /* dot11FrameduplicateCount */ -+ uint32 txrts; /* dot11RTSSuccessCount */ -+ uint32 txnocts; /* dot11RTSFailureCount */ -+ uint32 txnoack; /* dot11ACKFailureCount */ -+ uint32 rxfrag; /* dot11ReceivedFragmentCount */ -+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ -+ uint32 rxcrc; /* dot11FCSErrorCount */ -+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */ -+ uint32 rxundec; /* dot11WEPUndecryptableCount */ -+} d11cnt_t; -+ -+/* BRCM OUI */ -+#define BRCM_OUI "\x00\x10\x18" -+ -+/* WPA definitions */ -+#define WPA_VERSION 1 -+#define WPA_OUI "\x00\x50\xF2" -+ -+#define WPA_OUI_LEN 3 -+ -+/* WPA authentication modes */ -+#define WPA_AUTH_NONE 0 /* None */ -+#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ -+#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ -+#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ -+ -+#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ -+ (auth) == WPA_AUTH_UNSPECIFIED || \ -+ (auth) == WPA_AUTH_PSK) -+ -+ -+/* Key related defines */ -+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ -+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ -+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ -+ -+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ -+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ -+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ -+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -+#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ -+#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ -+#define AES_KEY_SIZE 16 /* size of AES key */ ++/* PCI_CFG_CMD_STAT */ ++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ + -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() +#endif -+ -+#endif /* _802_11_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-08-28 11:12:20.450856112 +0200 +diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h +--- linux.old/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h 2005-12-15 12:57:27.869191250 +0100 @@ -0,0 +1,145 @@ +/******************************************************************************* + * $Id$ @@ -9859,82 +8981,9 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.1 +#undef PACKED + +#endif /* _NET_ETHERNET_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-08-28 11:12:20.451855960 +0200 -@@ -0,0 +1,69 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * crc.h - a function to compute crc for iLine10 headers -+ ******************************************************************************/ -+ -+#ifndef _RTS_CRC_H_ -+#define _RTS_CRC_H_ 1 -+ -+#include "typedefs.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+ -+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -+#define HCS_GOOD_VALUE 0x39 /* Good final header checksum value */ -+ -+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -+ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ -+ -+void hcs(uint8 *, uint); -+uint8 crc8(uint8 *, uint, uint8); -+uint16 crc16(uint8 *, uint, uint16); -+uint32 crc32(uint8 *, uint, uint32); -+ -+/* macros for common usage */ -+ -+#define APPEND_CRC8(pbytes, nbytes) \ -+do { \ -+ uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \ -+ (pbytes)[(nbytes)] = tmp; \ -+ (nbytes) += 1; \ -+} while (0) -+ -+#define APPEND_CRC16(pbytes, nbytes) \ -+do { \ -+ uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \ -+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ -+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ -+ (nbytes) += 2; \ -+} while (0) -+ -+#define APPEND_CRC32(pbytes, nbytes) \ -+do { \ -+ uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \ -+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ -+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ -+ (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff; \ -+ (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff; \ -+ (nbytes) += 4; \ -+} while (0) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _RTS_CRC_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h 2005-08-28 11:12:20.451855960 +0200 +diff -urN linux.old/arch/mips/bcm947xx/include/s5.h linux.dev/arch/mips/bcm947xx/include/s5.h +--- linux.old/arch/mips/bcm947xx/include/s5.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/s5.h 2005-12-15 12:57:27.869191250 +0100 @@ -0,0 +1,103 @@ +#ifndef _S5_H_ +#define _S5_H_ @@ -10039,10 +9088,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h linux-2.6.12.5-brcm/arc + + +#endif /*!_S5_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h 2005-08-28 11:12:20.468853376 +0200 -@@ -0,0 +1,281 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h +--- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2005-12-15 15:35:20.458560250 +0100 +@@ -0,0 +1,440 @@ +/* + * SiliconBackplane Chipcommon core hardware definitions. + * @@ -10050,7 +9099,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, + * gpio interface, extbus, and support for serial and parallel flashes. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * $Id$ ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -10058,13 +9108,14 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * $Id$ + */ + +#ifndef _SBCHIPC_H +#define _SBCHIPC_H + + ++#ifndef _LANGUAGE_ASSEMBLY ++ +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line @@ -10076,12 +9127,25 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + uint32 chipid; /* 0x0 */ + uint32 capabilities; + uint32 corecontrol; /* corerev >= 1 */ -+ uint32 PAD[5]; ++ uint32 bist; ++ ++ /* OTP */ ++ uint32 otpstatus; /* 0x10, corerev >= 10 */ ++ uint32 otpcontrol; ++ uint32 otpprog; ++ uint32 PAD; + + /* Interrupt control */ + uint32 intstatus; /* 0x20 */ + uint32 intmask; -+ uint32 PAD[6]; ++ uint32 chipcontrol; /* 0x28, rev >= 11 */ ++ uint32 chipstatus; /* 0x2c, rev >= 11 */ ++ ++ /* Jtag Master */ ++ uint32 jtagcmd; /* 0x30, rev >= 10 */ ++ uint32 jtagir; ++ uint32 jtagdr; ++ uint32 jtagctrl; + + /* serial flash interface registers */ + uint32 flashcontrol; /* 0x40 */ @@ -10090,7 +9154,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + uint32 PAD[1]; + + /* Silicon backplane configuration broadcast control */ -+ uint32 broadcastaddress; ++ uint32 broadcastaddress; /* 0x50 */ + uint32 broadcastdata; + uint32 PAD[2]; + @@ -10105,7 +9169,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + + /* Watchdog timer */ + uint32 watchdog; /* 0x80 */ -+ uint32 PAD[3]; ++ uint32 PAD[1]; ++ ++ /*GPIO based LED powersave registers corerev >= 16*/ ++ uint32 gpiotimerval; /*0x88 */ ++ uint32 gpiotimeroutmask; + + /* clock control */ + uint32 clockcontrol_n; /* 0x90 */ @@ -10113,28 +9181,33 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + uint32 clockcontrol_pci; /* aka m1 */ + uint32 clockcontrol_m2; /* mii/uart/mipsref */ + uint32 clockcontrol_mips; /* aka m3 */ -+ uint32 uart_clkdiv; /* corerev >= 3 */ ++ uint32 clkdiv; /* corerev >= 3 */ + uint32 PAD[2]; + + /* pll delay registers (corerev >= 4) */ + uint32 pll_on_delay; /* 0xb0 */ + uint32 fref_sel_delay; -+ uint32 slow_clk_ctl; -+ uint32 PAD[17]; ++ uint32 slow_clk_ctl; /* 5 < corerev < 10 */ ++ uint32 PAD[1]; ++ ++ /* Instaclock registers (corerev >= 10) */ ++ uint32 system_clk_ctl; /* 0xc0 */ ++ uint32 clkstatestretch; ++ uint32 PAD[14]; + + /* ExtBus control registers (corerev >= 3) */ -+ uint32 cs01config; /* 0x100 */ -+ uint32 cs01memwaitcnt; -+ uint32 cs01attrwaitcnt; -+ uint32 cs01iowaitcnt; -+ uint32 cs23config; -+ uint32 cs23memwaitcnt; -+ uint32 cs23attrwaitcnt; -+ uint32 cs23iowaitcnt; -+ uint32 cs4config; -+ uint32 cs4waitcnt; -+ uint32 parallelflashconfig; -+ uint32 parallelflashwaitcnt; ++ uint32 pcmcia_config; /* 0x100 */ ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; ++ uint32 ide_config; ++ uint32 ide_memwait; ++ uint32 ide_attrwait; ++ uint32 ide_iowait; ++ uint32 prog_config; ++ uint32 prog_waitcount; ++ uint32 flash_config; ++ uint32 flash_waitcount; + uint32 PAD[116]; + + /* uarts */ @@ -10158,6 +9231,24 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc + uint8 uart1scratch; +} chipcregs_t; + ++#endif /* _LANGUAGE_ASSEMBLY */ ++ ++#define CC_CHIPID 0 ++#define CC_CAPABILITIES 4 ++#define CC_JTAGCMD 0x30 ++#define CC_JTAGIR 0x34 ++#define CC_JTAGDR 0x38 ++#define CC_JTAGCTRL 0x3c ++#define CC_WATCHDOG 0x80 ++#define CC_CLKC_N 0x90 ++#define CC_CLKC_M0 0x94 ++#define CC_CLKC_M1 0x98 ++#define CC_CLKC_M2 0x9c ++#define CC_CLKC_M3 0xa0 ++#define CC_CLKDIV 0xa4 ++#define CC_SYS_CLK_CTL 0xc0 ++#define CC_OTP 0x800 ++ +/* chipid */ +#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ +#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ @@ -10177,6 +9268,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc +#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ +#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ +#define CAP_PWR_CTL 0x00040000 /* Power control */ ++#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ ++#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ ++#define CAP_OTPSIZE_BASE 5 /* OTP Size base */ ++#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ ++#define CAP_ROM 0x00800000 /* Internal boot rom active */ + +/* PLL type */ +#define PLL_NONE 0x00000000 @@ -10184,13 +9280,81 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc +#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ +#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ +#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */ ++#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ ++#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */ + +/* corecontrol */ +#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ +#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ + ++/* Fields in the otpstatus register */ ++#define OTPS_PROGFAIL 0x80000000 ++#define OTPS_PROTECT 0x00000007 ++#define OTPS_HW_PROTECT 0x00000001 ++#define OTPS_SW_PROTECT 0x00000002 ++#define OTPS_CID_PROTECT 0x00000004 ++ ++/* Fields in the otpcontrol register */ ++#define OTPC_RECWAIT 0xff000000 ++#define OTPC_PROGWAIT 0x00ffff00 ++#define OTPC_PRW_SHIFT 8 ++#define OTPC_MAXFAIL 0x00000038 ++#define OTPC_VSEL 0x00000006 ++#define OTPC_SELVL 0x00000001 ++ ++/* Fields in otpprog */ ++#define OTPP_COL_MASK 0x000000ff ++#define OTPP_ROW_MASK 0x0000ff00 ++#define OTPP_ROW_SHIFT 8 ++#define OTPP_READERR 0x10000000 ++#define OTPP_VALUE 0x20000000 ++#define OTPP_VALUE_SHIFT 29 ++#define OTPP_READ 0x40000000 ++#define OTPP_START 0x80000000 ++#define OTPP_BUSY 0x80000000 ++ ++/* jtagcmd */ ++#define JCMD_START 0x80000000 ++#define JCMD_BUSY 0x80000000 ++#define JCMD_PAUSE 0x40000000 ++#define JCMD0_ACC_MASK 0x0000f000 ++#define JCMD0_ACC_IRDR 0x00000000 ++#define JCMD0_ACC_DR 0x00001000 ++#define JCMD0_ACC_IR 0x00002000 ++#define JCMD0_ACC_RESET 0x00003000 ++#define JCMD0_ACC_IRPDR 0x00004000 ++#define JCMD0_ACC_PDR 0x00005000 ++#define JCMD0_IRW_MASK 0x00000f00 ++#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ ++#define JCMD_ACC_IRDR 0x00000000 ++#define JCMD_ACC_DR 0x00010000 ++#define JCMD_ACC_IR 0x00020000 ++#define JCMD_ACC_RESET 0x00030000 ++#define JCMD_ACC_IRPDR 0x00040000 ++#define JCMD_ACC_PDR 0x00050000 ++#define JCMD_IRW_MASK 0x00001f00 ++#define JCMD_IRW_SHIFT 8 ++#define JCMD_DRW_MASK 0x0000003f ++ ++/* jtagctrl */ ++#define JCTRL_FORCE_CLK 4 /* Force clock */ ++#define JCTRL_EXT_EN 2 /* Enable external targets */ ++#define JCTRL_EN 1 /* Enable Jtag master */ ++ ++/* Fields in clkdiv */ ++#define CLKD_SFLASH 0x0f000000 ++#define CLKD_SFLASH_SHIFT 24 ++#define CLKD_OTP 0x000f0000 ++#define CLKD_OTP_SHIFT 16 ++#define CLKD_JTAG 0x00000f00 ++#define CLKD_JTAG_SHIFT 8 ++#define CLKD_UART 0x000000ff ++ +/* intstatus/intmask */ ++#define CI_GPIO 0x00000001 /* gpio intr */ +#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ ++#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ + +/* slow_clk_ctl */ +#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ @@ -10203,13 +9367,27 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc +#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ -+#define SCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */ -+#define SCC_CD_SHF 16 /* CLockDivider shift */ ++#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ ++#define SCC_CD_SHIFT 16 ++ ++/* system_clk_ctl */ ++#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ ++#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ ++#define SYCC_FP 0x00000004 /* ForcePLLOn */ ++#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ ++#define SYCC_HR 0x00000010 /* Force HT */ ++#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4+divisor)) */ ++#define SYCC_CD_SHIFT 16 ++ ++/* gpiotimerval*/ ++#define GPIO_ONTIME_SHIFT 16 + +/* clockcontrol_n */ +#define CN_N1_MASK 0x3f /* n1 control */ +#define CN_N2_MASK 0x3f00 /* n2 control */ +#define CN_N2_SHIFT 8 ++#define CN_PLLC_MASK 0xf0000 /* pll control */ ++#define CN_PLLC_SHIFT 16 + +/* clockcontrol_sb/pci/uart */ +#define CC_M1_MASK 0x3f /* m1 control */ @@ -10220,12 +9398,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc +#define CC_MC_MASK 0x1f000000 /* mux control */ +#define CC_MC_SHIFT 24 + -+/* N3M Clock control values for 125Mhz */ -+#define CC_125_N 0x0802 /* Default values for bcm4310 */ -+#define CC_125_M 0x04020009 -+#define CC_125_M25 0x11090009 -+#define CC_125_M33 0x11090005 -+ +/* N3M Clock control magic field values */ +#define CC_F6_2 0x02 /* A factor of 2 in */ +#define CC_F6_3 0x03 /* 6-bit fields like */ @@ -10250,8 +9422,19 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc +#define CC_T2MC_M2BYP 2 +#define CC_T2MC_M3BYP 4 + ++/* Type 6 Clock control magic field values */ ++#define CC_T6_MMASK 1 /* bits of interest in m */ ++#define CC_T6_M0 120000000 /* sb clock for m = 0 */ ++#define CC_T6_M1 100000000 /* sb clock for m = 1 */ ++#define SB2MIPS_T6(sb) (2 * (sb)) ++ +/* Common clock base */ -+#define CC_CLOCK_BASE 24000000 /* Half the clock freq */ ++#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ ++#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */ ++ ++/* Clock control values for 200Mhz in 5350 */ ++#define CLKC_5350_N 0x0311 ++#define CLKC_5350_M 0x04020009 + +/* Flash types in the chipcommon capabilities register */ +#define FLASH_NONE 0x000 /* No flash */ @@ -10323,21 +9506,46 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brc +#define SFLASH_AT_ID_MASK 0x38 +#define SFLASH_AT_ID_SHIFT 3 + ++/* OTP regions */ ++#define OTP_HW_REGION OTPS_HW_PROTECT ++#define OTP_SW_REGION OTPS_SW_PROTECT ++#define OTP_CID_REGION OTPS_CID_PROTECT ++ ++/* OTP regions (Byte offsets from otp size) */ ++#define OTP_SWLIM_OFF (-8) ++#define OTP_CIDBASE_OFF 0 ++#define OTP_CIDLIM_OFF 8 ++ ++/* Predefined OTP words (Word offset from otp size) */ ++#define OTP_BOUNDARY_OFF (-4) ++#define OTP_HWSIGN_OFF (-3) ++#define OTP_SWSIGN_OFF (-2) ++#define OTP_CIDSIGN_OFF (-1) ++ ++#define OTP_CID_OFF 0 ++#define OTP_PKG_OFF 1 ++#define OTP_FID_OFF 2 ++#define OTP_RSV_OFF 3 ++#define OTP_LIM_OFF 4 ++ ++#define OTP_SIGNATURE 0x578a ++#define OTP_MAGIC 0x4e56 ++ +#endif /* _SBCHIPC_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h 2005-08-28 11:12:20.469853224 +0200 -@@ -0,0 +1,296 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h +--- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2005-12-15 15:35:24.538815250 +0100 +@@ -0,0 +1,342 @@ +/* + * Broadcom SiliconBackplane hardware register definitions. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + @@ -10356,16 +9564,27 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br + * All regions may not exist on all chips. + */ +#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ -+#define SB_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define SB_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ +#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ +#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ +#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ ++ ++#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ ++#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ ++ +#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ -+#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define SB_FLASH1 0x1fc00000 /* Flash Region 1 */ ++#define SB_FLASH1_SZ 0x00400000 /* Size of Flash Region 1 */ ++ ++#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ ++#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ ++#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ +#define SB_EUART (SB_EXTIF_BASE + 0x00800000) +#define SB_LED (SB_EXTIF_BASE + 0x00900000) + ++ +/* enumeration space related defs */ +#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ +#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) @@ -10378,8 +9597,6 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br +/* + * Sonics Configuration Space Registers. + */ -+#ifdef _LANGUAGE_ASSEMBLY -+ +#define SBIPSFLAG 0x08 +#define SBTPSFLAG 0x18 +#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ @@ -10404,8 +9621,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br +#define SBIDLOW 0xf8 +#define SBIDHIGH 0xfc + -+ -+#else ++#ifndef _LANGUAGE_ASSEMBLY + +typedef volatile struct _sbconfig { + uint32 PAD[2]; @@ -10483,7 +9699,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br + +/* sbtmstatelow */ +#define SBTML_RESET 0x1 /* reset */ -+#define SBTML_REJ 0x2 /* reject */ ++#define SBTML_REJ_MASK 0x6 /* reject */ ++#define SBTML_REJ_SHIFT 1 +#define SBTML_CLK 0x10000 /* clock enable */ +#define SBTML_FGC 0x20000 /* force gated clocks on */ +#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ @@ -10496,10 +9713,12 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br +#define SBTMH_BUSY 0x4 /* busy */ +#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ +#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ ++#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ +#define SBTMH_GCR 0x20000000 /* gated clock request */ +#define SBTMH_BISTF 0x40000000 /* bist failed */ +#define SBTMH_BISTD 0x80000000 /* bist done */ + ++ +/* sbbwa0 */ +#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ +#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ @@ -10587,10 +9806,16 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br +#define SBIDL_IP_SHIFT 24 +#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ +#define SBIDL_RV_SHIFT 28 ++#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ ++#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ + +/* sbidhigh */ -+#define SBIDH_RC_MASK 0xf /* revision code*/ -+#define SBIDH_CC_MASK 0xfff0 /* core code */ ++#define SBIDH_RC_MASK 0x000f /* revision code */ ++#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ ++#define SBIDH_RCE_SHIFT 8 ++#define SBCOREREV(sbidh) \ ++ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) ++#define SBIDH_CC_MASK 0x8ff0 /* core code */ +#define SBIDH_CC_SHIFT 4 +#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ +#define SBIDH_VC_SHIFT 16 @@ -10609,9 +9834,11 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br +#define SB_ENET 0x806 /* enet mac core */ +#define SB_CODEC 0x807 /* v90 codec core */ +#define SB_USB 0x808 /* usb 1.1 host/device core */ ++#define SB_ADSL 0x809 /* ADSL core */ +#define SB_ILINE100 0x80a /* iline100 core */ +#define SB_IPSEC 0x80b /* ipsec core */ +#define SB_PCMCIA 0x80d /* pcmcia core */ ++#define SB_SOCRAM 0x80e /* internal memory core */ +#define SB_MEMC 0x80f /* memc sdram core */ +#define SB_EXTIF 0x811 /* external interface core */ +#define SB_D11 0x812 /* 802.11 MAC core */ @@ -10619,14 +9846,41 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-br +#define SB_USB11H 0x817 /* usb 1.1 host core */ +#define SB_USB11D 0x818 /* usb 1.1 device core */ +#define SB_USB20H 0x819 /* usb 2.0 host core */ -+#define SB_USB20D 0x81A /* usb 2.0 device core */ -+#define SB_SDIOH 0x81B /* sdio host core */ -+#define SB_ROBO 0x81C /* robo switch core */ ++#define SB_USB20D 0x81a /* usb 2.0 device core */ ++#define SB_SDIOH 0x81b /* sdio host core */ ++#define SB_ROBO 0x81c /* roboswitch core */ ++#define SB_ATA100 0x81d /* parallel ATA core */ ++#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ ++#define SB_GIGETH 0x81f /* gigabit ethernet core */ ++#define SB_PCIE 0x820 /* pci express core */ ++#define SB_SRAMC 0x822 /* SRAM controller core */ ++#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ ++ ++#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ ++ ++/* Not really related to Silicon Backplane, but a couple of software ++ * conventions for the use the flash space: ++ */ ++ ++/* Minumum amount of flash we support */ ++#define FLASH_MIN 0x00020000 /* Minimum flash size */ ++ ++/* A boot/binary may have an embedded block that describes its size */ ++#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ ++#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ ++#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ ++#define BISZ_TXTST_IDX 1 /* 1: text start */ ++#define BISZ_TXTEND_IDX 2 /* 2: text start */ ++#define BISZ_DATAST_IDX 3 /* 3: text start */ ++#define BISZ_DATAEND_IDX 4 /* 4: text start */ ++#define BISZ_BSSST_IDX 5 /* 5: text start */ ++#define BISZ_BSSEND_IDX 6 /* 6: text start */ ++#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ + +#endif /* _SBCONFIG_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h 2005-08-28 11:12:20.470853072 +0200 +diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h +--- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2005-12-15 16:48:55.651993750 +0100 @@ -0,0 +1,242 @@ +/* + * Hardware-specific External Interface I/O core definitions @@ -10642,13 +9896,13 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h linux-2.6.12.5-brc + * The external interface core also contains 2 on-chip 16550 UARTs, clock + * frequency control, a watchdog interrupt timer, and a GPIO interface. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + @@ -10870,20 +10124,21 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h linux-2.6.12.5-brc +#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ + +#endif /* _SBEXTIF_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h 2005-08-28 11:12:20.471852920 +0200 -@@ -0,0 +1,144 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h +--- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2005-12-15 15:35:31.567254500 +0100 +@@ -0,0 +1,148 @@ +/* + * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * + * $Id$ + */ + @@ -10949,7 +10204,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm + +/* For sdr: */ +#define MEMC_SD_CONFIG_INIT 0x00048000 -+#define MEMC_SD_DRAMTIM_INIT 0x000754da ++#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_SD_DRAMTIM3_INIT 0x000754da +#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 +#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 +#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ @@ -10972,8 +10228,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm + +/* For ddr: */ +#define MEMC_CONFIG_INIT 0x00048000 -+#define MEMC_DRAMTIM_INIT 0x000754d9 ++#define MEMC_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_DRAMTIM25_INIT 0x000754d9 +#define MEMC_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */ +#define MEMC_WRNCDLCOR_INIT 0x49351200 +#define MEMC_1_WRNCDLCOR_INIT 0x14500200 +#define MEMC_DQSGATENCDL_INIT 0x00030000 @@ -11018,10 +10276,10 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm +#define MEMC_CONFIG_DDR 0x00000001 + +#endif /* _SBMEMC_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h 2005-08-28 11:12:20.471852920 +0200 -@@ -0,0 +1,56 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm947xx/include/sbmips.h +--- linux.old/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbmips.h 2005-12-15 16:46:57.616617000 +0100 +@@ -0,0 +1,62 @@ +/* + * Broadcom SiliconBackplane MIPS definitions + * @@ -11031,7 +10289,7 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm + * interface. The core revision is stored in the SB ID register in SB + * configuration space. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -11045,6 +10303,8 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm +#ifndef _SBMIPS_H +#define _SBMIPS_H + ++#include ++ +#ifndef _LANGUAGE_ASSEMBLY + +/* cpp contortions to concatenate w/arg prescan */ @@ -11064,35 +10324,39 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm + uint32 timer; +} mipsregs_t; + -+extern uint32 sb_flag(void *sbh); -+extern uint sb_irq(void *sbh); ++extern uint32 sb_flag(sb_t *sbh); ++extern uint sb_irq(sb_t *sbh); + -+extern void sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); ++extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); + -+extern void sb_mips_init(void *sbh); -+extern uint32 sb_mips_clock(void *sbh); -+extern bool sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); ++extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap); ++extern void sb_jtagm_disable(void *h); ++extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr); ++extern void BCMINIT(sb_mips_init)(sb_t *sbh); ++extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh); ++extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); ++extern void BCMINIT(enable_pfc)(uint32 mode); ++extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh); + -+extern uint32 sb_memc_get_ncdl(void *sbh); + +#endif /* _LANGUAGE_ASSEMBLY */ + +#endif /* _SBMIPS_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h 2005-08-28 11:12:20.471852920 +0200 -@@ -0,0 +1,113 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h +--- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2005-12-15 15:35:36.795581250 +0100 +@@ -0,0 +1,122 @@ +/* + * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. + * + * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + */ + +#ifndef _SBPCI_H @@ -11175,8 +10439,17 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h linux-2.6.12.5-brcm/ +#define SBTOPCI_IO 1 +#define SBTOPCI_CFG0 2 +#define SBTOPCI_CFG1 3 -+#define SBTOPCI_PREF 0x4 /* prefetch enable */ -+#define SBTOPCI_BURST 0x8 /* burst enable */ ++#define SBTOPCI_PREF 0x4 /* prefetch enable */ ++#define SBTOPCI_BURST 0x8 /* burst enable */ ++#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */ ++#define SBTOPCI_RC_READ 0x00 /* memory read */ ++#define SBTOPCI_RC_READLINE 0x10 /* memory read line */ ++#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ ++ ++/* PCI core index in SROM shadow area */ ++#define SRSH_PI_OFFSET 0 /* first word */ ++#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ ++#define SRSH_PI_SHIFT 12 /* bit 15:12 */ + +/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ +#define cap_list rsvd_a[0] @@ -11186,164 +10459,29 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h linux-2.6.12.5-brcm/ + +#ifndef _LANGUAGE_ASSEMBLY + -+extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); -+extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); +extern void sbpci_ban(uint16 core); -+extern int sbpci_init(void *sbh); -+extern void sbpci_check(void *sbh); ++extern int sbpci_init(sb_t *sbh); ++extern void sbpci_check(sb_t *sbh); + +#endif /* !_LANGUAGE_ASSEMBLY */ + +#endif /* _SBPCI_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h 2005-08-28 11:12:20.472852768 +0200 -@@ -0,0 +1,131 @@ -+/* -+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. -+ * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ -+ -+#ifndef _SBPCMCIA_H -+#define _SBPCMCIA_H -+ -+ -+/* All the addresses that are offsets in attribute space are divided -+ * by two to account for the fact that odd bytes are invalid in -+ * attribute space and our read/write routines make the space appear -+ * as if they didn't exist. Still we want to show the original numbers -+ * as documented in the hnd_pcmcia core manual. -+ */ -+ -+/* PCMCIA Function Configuration Registers */ -+#define PCMCIA_FCR (0x700 / 2) -+ -+#define FCR0_OFF 0 -+#define FCR1_OFF (0x40 / 2) -+#define FCR2_OFF (0x80 / 2) -+#define FCR3_OFF (0xc0 / 2) -+ -+#define PCMCIA_FCR0 (0x700 / 2) -+#define PCMCIA_FCR1 (0x740 / 2) -+#define PCMCIA_FCR2 (0x780 / 2) -+#define PCMCIA_FCR3 (0x7c0 / 2) -+ -+/* Standard PCMCIA FCR registers */ -+ -+#define PCMCIA_COR 0 -+ -+#define COR_RST 0x80 -+#define COR_LEV 0x40 -+#define COR_IRQEN 0x04 -+#define COR_BLREN 0x01 -+#define COR_FUNEN 0x01 -+ -+ -+#define PCICIA_FCSR (2 / 2) -+#define PCICIA_PRR (4 / 2) -+#define PCICIA_SCR (6 / 2) -+#define PCICIA_ESR (8 / 2) -+ -+ -+#define PCM_MEMOFF 0x0000 -+#define F0_MEMOFF 0x1000 -+#define F1_MEMOFF 0x2000 -+#define F2_MEMOFF 0x3000 -+#define F3_MEMOFF 0x4000 -+ -+/* Memory base in the function fcr's */ -+#define MEM_ADDR0 (0x728 / 2) -+#define MEM_ADDR1 (0x72a / 2) -+#define MEM_ADDR2 (0x72c / 2) -+ -+/* PCMCIA base plus Srom access in fcr0: */ -+#define PCMCIA_ADDR0 (0x072e / 2) -+#define PCMCIA_ADDR1 (0x0730 / 2) -+#define PCMCIA_ADDR2 (0x0732 / 2) -+ -+#define MEM_SEG (0x0734 / 2) -+#define SROM_CS (0x0736 / 2) -+#define SROM_DATAL (0x0738 / 2) -+#define SROM_DATAH (0x073a / 2) -+#define SROM_ADDRL (0x073c / 2) -+#define SROM_ADDRH (0x073e / 2) -+ -+/* Values for srom_cs: */ -+#define SROM_IDLE 0 -+#define SROM_WRITE 1 -+#define SROM_READ 2 -+#define SROM_WEN 4 -+#define SROM_WDS 7 -+#define SROM_DONE 8 -+ -+/* CIS stuff */ -+ -+/* The CIS stops where the FCRs start */ -+#define CIS_SIZE PCMCIA_FCR -+ -+/* Standard tuples we know about */ -+ -+#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ -+#define CISTPL_FUNCE 0x22 /* Function extensions */ -+#define CISTPL_CFTABLE 0x1b /* Config table entry */ -+ -+/* Function extensions for LANs */ -+ -+#define LAN_TECH 1 /* Technology type */ -+#define LAN_SPEED 2 /* Raw bit rate */ -+#define LAN_MEDIA 3 /* Transmission media */ -+#define LAN_NID 4 /* Node identification (aka MAC addr) */ -+#define LAN_CONN 5 /* Connector standard */ -+ -+ -+/* CFTable */ -+#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ -+#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ -+#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ -+ -+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll -+ * take one for HNBU, and use "extensions" (a la FUNCE) within it. -+ */ -+ -+#define CISTPL_BRCM_HNBU 0x80 -+ -+/* Subtypes of BRCM_HNBU: */ -+ -+#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor & -+ * device id and chiprev -+ */ -+#define HNBU_BOARDREV 0x02 /* Two bytes board revision */ -+#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */ -+#define HNBU_OEM 0x04 /* Eight bytes OEM data */ -+#define HNBU_CC 0x05 /* Default country code */ -+#define HNBU_AA 0x06 /* Antennas available */ -+#define HNBU_AG 0x07 /* Antenna gain */ -+#define HNBU_BOARDFLAGS 0x08 /* board flags */ -+#define HNBU_LED 0x09 /* LED set */ -+ -+#endif /* _SBPCMCIA_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h 2005-08-28 11:12:20.472852768 +0200 +diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h +--- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2005-12-15 15:35:40.175792500 +0100 @@ -0,0 +1,75 @@ +/* + * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + @@ -11409,15 +10547,15 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.12.5-brc +#define MEM8MX16X2 0xc29 /* 32 MB */ + +#endif /* _SBSDRAM_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h 2005-08-28 11:12:20.473852616 +0200 -@@ -0,0 +1,90 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h +--- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2005-12-15 16:00:47.404550500 +0100 +@@ -0,0 +1,136 @@ +/* + * Misc utility routines for accessing chip-specific features + * of Broadcom HNBU SiliconBackplane-based chips. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -11431,11 +10569,28 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h linux-2.6.12.5-brc +#ifndef _sbutils_h_ +#define _sbutils_h_ + -+/* Board styles (bustype) */ -+#define BOARDSTYLE_SOC 0 /* Silicon Backplane */ -+#define BOARDSTYLE_PCI 1 /* PCI/MiniPCI board */ -+#define BOARDSTYLE_PCMCIA 2 /* PCMCIA board */ -+#define BOARDSTYLE_CARDBUS 3 /* Cardbus board */ ++/* ++ * Datastructure to export all chip specific common variables ++ * public (read-only) portion of sbutils handle returned by ++ * sb_attach()/sb_kattach() ++*/ ++ ++struct sb_pub { ++ ++ uint bustype; /* SB_BUS, PCI_BUS */ ++ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE*/ ++ uint buscorerev; /* buscore rev */ ++ uint buscoreidx; /* buscore index */ ++ int ccrev; /* chip common core rev */ ++ uint boardtype; /* board type */ ++ uint boardvendor; /* board vendor */ ++ uint chip; /* chip number */ ++ uint chiprev; /* chip revision */ ++ uint chippkg; /* chip package option */ ++ uint sonicsrev; /* sonics backplane rev */ ++}; ++ ++typedef const struct sb_pub sb_t; + +/* + * Many of the routines below take an 'sbh' handle as their first arg. @@ -11446,71 +10601,140 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h linux-2.6.12.5-brc + */ + +/* exported externs */ -+extern void *sb_attach(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); -+extern void *sb_kattach(void); -+extern void sb_detach(void *sbh); -+extern uint sb_chip(void *sbh); -+extern uint sb_chiprev(void *sbh); -+extern uint sb_chippkg(void *sbh); -+extern uint sb_boardvendor(void *sbh); -+extern uint sb_boardtype(void *sbh); -+extern uint sb_boardstyle(void *sbh); -+extern uint sb_bus(void *sbh); -+extern uint sb_corelist(void *sbh, uint coreid[]); -+extern uint sb_coreid(void *sbh); -+extern uint sb_coreidx(void *sbh); -+extern uint sb_coreunit(void *sbh); -+extern uint sb_corevendor(void *sbh); -+extern uint sb_corerev(void *sbh); -+extern void *sb_coreregs(void *sbh); -+extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val); -+extern bool sb_iscoreup(void *sbh); -+extern void *sb_setcoreidx(void *sbh, uint coreidx); -+extern void *sb_setcore(void *sbh, uint coreid, uint coreunit); -+extern void sb_commit(void *sbh); ++extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); ++extern sb_t * BCMINIT(sb_kattach)(void); ++extern void sb_detach(sb_t *sbh); ++extern uint BCMINIT(sb_chip)(sb_t *sbh); ++extern uint BCMINIT(sb_chiprev)(sb_t *sbh); ++extern uint BCMINIT(sb_chipcrev)(sb_t *sbh); ++extern uint BCMINIT(sb_chippkg)(sb_t *sbh); ++extern uint BCMINIT(sb_pcirev)(sb_t *sbh); ++extern bool BCMINIT(sb_war16165)(sb_t *sbh); ++extern uint BCMINIT(sb_boardvendor)(sb_t *sbh); ++extern uint BCMINIT(sb_boardtype)(sb_t *sbh); ++extern uint sb_bus(sb_t *sbh); ++extern uint sb_buscoretype(sb_t *sbh); ++extern uint sb_buscorerev(sb_t *sbh); ++extern uint sb_corelist(sb_t *sbh, uint coreid[]); ++extern uint sb_coreid(sb_t *sbh); ++extern uint sb_coreidx(sb_t *sbh); ++extern uint sb_coreunit(sb_t *sbh); ++extern uint sb_corevendor(sb_t *sbh); ++extern uint sb_corerev(sb_t *sbh); ++extern void *sb_osh(sb_t *sbh); ++extern void *sb_coreregs(sb_t *sbh); ++extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val); ++extern bool sb_iscoreup(sb_t *sbh); ++extern void *sb_setcoreidx(sb_t *sbh, uint coreidx); ++extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit); ++extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit); ++extern void sb_commit(sb_t *sbh); +extern uint32 sb_base(uint32 admatch); +extern uint32 sb_size(uint32 admatch); -+extern void sb_core_reset(void *sbh, uint32 bits); -+extern void sb_core_tofixup(void *sbh); -+extern void sb_core_disable(void *sbh, uint32 bits); ++extern void sb_core_reset(sb_t *sbh, uint32 bits); ++extern void sb_core_tofixup(sb_t *sbh); ++extern void sb_core_disable(sb_t *sbh, uint32 bits); +extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); -+extern uint32 sb_clock(void *sbh); -+extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask); -+extern void sb_pcmcia_init(void *sbh); -+extern void sb_watchdog(void *sbh, uint ticks); -+extern void *sb_gpiosetcore(void *sbh); -+extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioin(void *sbh); -+extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val); -+extern bool sb_taclear(void *sbh); -+extern void sb_pwrctl_init(void *sbh); -+extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh); -+extern bool sb_pwrctl_clk(void *sbh, uint mode); -+extern int sb_pwrctl_xtal(void *sbh, uint what, bool on); -+extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg); -+ -+/* pwrctl xtal what flags */ ++extern uint32 sb_clock(sb_t *sbh); ++extern void sb_pci_setup(sb_t *sbh, uint coremask); ++extern void sb_watchdog(sb_t *sbh, uint ticks); ++extern void *sb_gpiosetcore(sb_t *sbh); ++extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioin(sb_t *sbh); ++extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority); ++extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority); ++ ++extern void sb_clkctl_init(sb_t *sbh); ++extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh); ++extern bool sb_clkctl_clk(sb_t *sbh, uint mode); ++extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on); ++extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, ++ void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg); ++extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to); ++extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif); ++extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val); ++ ++ ++ ++/* ++* Build device path. Path size must be >= SB_DEVPATH_BUFSZ. ++* The returned path is NULL terminated and has trailing '/'. ++* Return 0 on success, nonzero otherwise. ++*/ ++extern int sb_devpath(sb_t *sbh, char *path, int size); ++ ++/* clkctl xtal what flags */ +#define XTAL 0x1 /* primary crystal oscillator (2050) */ +#define PLL 0x2 /* main chip pll */ + -+/* pwrctl clk mode */ ++/* clkctl clk mode */ +#define CLK_FAST 0 /* force fast (pll) clock */ -+#define CLK_SLOW 1 /* force slow clock */ -+#define CLK_DYNAMIC 2 /* enable dynamic power control */ ++#define CLK_DYNAMIC 2 /* enable dynamic clock control */ ++ ++ ++/* GPIO usage priorities */ ++#define GPIO_DRV_PRIORITY 0 ++#define GPIO_APP_PRIORITY 1 ++ ++/* device path */ ++#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ + +#endif /* _sbutils_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h 2005-08-28 11:12:20.474852464 +0200 -@@ -0,0 +1,31 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h +--- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2005-12-15 16:49:23.001703000 +0100 +@@ -0,0 +1,36 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ ++ ++#ifndef _sflash_h_ ++#define _sflash_h_ ++ ++#include ++#include ++ ++struct sflash { ++ uint blocksize; /* Block size */ ++ uint numblocks; /* Number of blocks */ ++ uint32 type; /* Type */ ++ uint size; /* Total size in bytes */ ++}; ++ ++/* Utility functions */ ++extern int sflash_poll(chipcregs_t *cc, uint offset); ++extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); ++extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern int sflash_erase(chipcregs_t *cc, uint offset); ++extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern struct sflash * sflash_init(chipcregs_t *cc); ++ ++#endif /* _sflash_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h +--- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2005-12-15 15:35:49.220357750 +0100 +@@ -0,0 +1,33 @@ +/* + * TRX image file header format. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -11527,1068 +10751,353 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.12.5-brcm +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 1 /* Do not write TRX header */ ++#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ ++#define TRX_MAX_OFFSET 3 + +struct trx_header { + uint32 magic; /* "HDR0" */ + uint32 len; /* Length of file including header */ + uint32 crc32; /* 32-bit CRC from flag_version to end of file */ + uint32 flag_version; /* 0:15 flags, 16:31 version */ -+ uint32 offsets[3]; /* Offsets of partitions from start of header */ ++ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ +}; + +/* Compatibility */ +typedef struct trx_header TRXHDR, *PTRXHDR; -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h 2005-08-28 11:12:20.474852464 +0200 -@@ -0,0 +1,162 @@ +diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h +--- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2005-12-15 15:35:52.436558750 +0100 +@@ -0,0 +1,326 @@ +/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#ifndef _TYPEDEFS_H_ +#define _TYPEDEFS_H_ + -+/*----------------------- define TRUE, FALSE, NULL, bool ----------------*/ -+#ifdef __cplusplus + -+#ifndef FALSE -+#define FALSE false -+#endif -+#ifndef TRUE -+#define TRUE true -+#endif ++/* Define 'SITE_TYPEDEFS' in the compile to include a site specific ++ * typedef file "site_typedefs.h". ++ * ++ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" ++ * section of this file makes inferences about the compile environment ++ * based on defined symbols and possibly compiler pragmas. ++ * ++ * Following these two sections is the "Default Typedefs" ++ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is ++ * defined. This section has a default set of typedefs and a few ++ * proprocessor symbols (TRUE, FALSE, NULL, ...). ++ */ + -+#else /* !__cplusplus */ ++#ifdef SITE_TYPEDEFS + -+#if defined(_WIN32) ++/******************************************************************************* ++ * Site Specific Typedefs ++ *******************************************************************************/ + -+typedef unsigned char bool; ++#include "site_typedefs.h" + +#else + -+#if defined(MACOSX) && defined(KERNEL) -+#include -+#else -+typedef int bool; -+#endif ++/******************************************************************************* ++ * Inferred Typedefs ++ *******************************************************************************/ + -+#endif ++/* Infer the compile environment based on preprocessor symbols and pramas. ++ * Override type definitions as needed, and include configuration dependent ++ * header files to define types. ++ */ + ++#ifdef __cplusplus ++ ++#define TYPEDEF_BOOL +#ifndef FALSE -+#define FALSE 0 ++#define FALSE false +#endif +#ifndef TRUE -+#define TRUE 1 -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#endif -+ -+#endif /* __cplusplus */ -+ -+#ifndef OFF -+#define OFF 0 -+#endif -+ -+#ifndef ON -+#define ON 1 -+#endif -+ -+/*----------------------- define uchar, ushort, uint, ulong ----------------*/ -+ -+typedef unsigned char uchar; -+ -+#if defined(_WIN32) || defined(PMON) || defined(__MRC__) || defined(V2_HAL) || defined(_CFE_) -+ -+#ifndef V2_HAL -+typedef unsigned short ushort; -+#endif -+ -+typedef unsigned int uint; -+typedef unsigned long ulong; -+ -+#else -+ -+/* pick up ushort & uint from standard types.h */ -+#if defined(linux) && defined(__KERNEL__) -+#include /* sys/types.h and linux/types.h are oil and water */ -+#else -+#include -+#if !defined(TARGETENV_sun4) && !defined(linux) -+typedef unsigned long ulong; -+#endif /* TARGETENV_sun4 */ -+#endif -+#if defined(PMON) -+typedef unsigned int uint; -+typedef unsigned long long uint64; ++#define TRUE true +#endif + -+#endif /* WIN32 || PMON || .. */ -+ -+/*----------------------- define [u]int8/16/32/64 --------------------------*/ -+ -+ -+#ifdef V2_HAL -+#include -+#else -+typedef signed char int8; -+typedef signed short int16; -+typedef signed int int32; -+ -+typedef unsigned char uint8; -+typedef unsigned short uint16; -+typedef unsigned int uint32; -+#endif /* V2_HAL */ -+ -+typedef float float32; -+typedef double float64; -+ -+/* -+ * abstracted floating point type allows for compile time selection of -+ * single or double precision arithmetic. Compiling with -DFLOAT32 -+ * selects single precision; the default is double precision. -+ */ -+ -+#if defined(FLOAT32) -+typedef float32 float_t; -+#else /* default to double precision floating point */ -+typedef float64 float_t; -+#endif /* FLOAT32 */ -+ -+#ifdef _MSC_VER /* Microsoft C */ -+typedef signed __int64 int64; -+typedef unsigned __int64 uint64; -+ -+#elif defined(__GNUC__) && !defined(__STRICT_ANSI__) -+/* gcc understands signed/unsigned 64 bit types, but complains in ANSI mode */ -+typedef signed long long int64; -+typedef unsigned long long uint64; -+ -+#elif defined(__ICL) && !defined(__STDC__) -+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode */ -+typedef unsigned long long uint64; -+ -+#endif /* _MSC_VER */ -+ -+ -+/*----------------------- define PTRSZ, INLINE --------------------------*/ -+ -+#define PTRSZ sizeof (char*) -+ -+#ifndef INLINE -+ -+#ifdef _MSC_VER ++#else /* ! __cplusplus */ + -+#define INLINE __inline ++#if defined(_WIN32) + -+#elif __GNUC__ ++#define TYPEDEF_BOOL ++typedef unsigned char bool; /* consistent w/BOOL */ + -+#define INLINE __inline__ ++#endif /* _WIN32 */ + -+#else ++#endif /* ! __cplusplus */ + -+#define INLINE ++/* use the Windows ULONG_PTR type when compiling for 64 bit */ ++#if defined(_WIN64) ++#include ++#define TYPEDEF_UINTPTR ++typedef ULONG_PTR uintptr; ++#endif + -+#endif /* _MSC_VER */ ++#ifdef _HNDRTE_ ++typedef long unsigned int size_t; ++#endif + -+#endif /* INLINE */ ++#ifdef _MSC_VER /* Microsoft C */ ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++typedef signed __int64 int64; ++typedef unsigned __int64 uint64; ++#endif + -+#endif /* _TYPEDEFS_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h 2005-08-28 11:12:20.475852312 +0200 -@@ -0,0 +1,690 @@ -+/* -+ * Custom OID/ioctl definitions for -+ * Broadcom 802.11abg Networking Device Driver -+ * -+ * Definitions subject to change without notice. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++#if defined(MACOSX) && defined(KERNEL) ++#define TYPEDEF_BOOL ++#endif + -+#ifndef _wlioctl_h_ -+#define _wlioctl_h_ + -+#include -+#include -+#include ++#if defined(linux) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#define TYPEDEF_ULONG ++#endif + -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#define PACKED ++#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT +#endif + -+/* -+ * Per-bss information structure. -+ */ + -+#define WL_NUMRATES 255 /* max # of rates in a rateset */ -+ -+typedef struct wl_rateset { -+ uint32 count; /* # rates in this set */ -+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -+} wl_rateset_t; -+ -+#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ -+#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ -+ -+typedef struct wl_bss_info106 { -+ uint version; /* version field */ -+ struct ether_addr BSSID; -+ uint8 SSID_len; -+ uint8 SSID[32]; -+ uint8 Privacy; /* 0=No WEP, 1=Use WEP */ -+ int16 RSSI; /* receive signal strength (in dBm) */ -+ uint16 beacon_period; /* units are Kusec */ -+ uint16 atim_window; /* units are Kusec */ -+ uint8 channel; /* Channel no. */ -+ int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ -+ struct { -+ uint count; /* # rates in this set */ -+ uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ -+ } rateset; /* supported rates */ -+ uint8 dtim_period; /* DTIM period */ -+ int8 phy_noise; /* noise right after tx (in dBm) */ -+ uint16 capability; /* Capability information */ -+ struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ -+ uint16 prb_len; /* probe response frame length (ioctl na) */ -+ struct { -+ uint8 supported; /* wpa supported */ -+ uint8 multicast; /* multicast cipher */ -+ uint8 ucount; /* count of unicast ciphers */ -+ uint8 unicast[4]; /* unicast ciphers */ -+ uint8 acount; /* count of auth modes */ -+ uint8 auth[4]; /* Authentication modes */ -+ } wpa; -+} wl_bss_info106_t; -+ -+typedef struct wl_bss_info { -+ uint32 version; /* version field */ -+ uint32 length; /* byte length of data in this record, starting at version and including IEs */ -+ struct ether_addr BSSID; -+ uint16 beacon_period; /* units are Kusec */ -+ uint16 capability; /* Capability information */ -+ uint8 SSID_len; -+ uint8 SSID[32]; -+ struct { -+ uint count; /* # rates in this set */ -+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ -+ } rateset; /* supported rates */ -+ uint8 channel; /* Channel no. */ -+ uint16 atim_window; /* units are Kusec */ -+ uint8 dtim_period; /* DTIM period */ -+ int16 RSSI; /* receive signal strength (in dBm) */ -+ int8 phy_noise; /* noise (in dBm) */ -+ uint32 ie_length; /* byte length of Information Elements */ -+ /* variable length Information Elements */ -+} wl_bss_info_t; -+ -+typedef struct wl_scan_results { -+ uint32 buflen; -+ uint32 version; -+ uint32 count; -+ wl_bss_info_t bss_info[1]; -+} wl_scan_results_t; -+/* size of wl_scan_results not including variable length array */ -+#define WL_SCAN_RESULTS_FIXED_SIZE 12 -+ -+/* uint32 list */ -+typedef struct wl_uint32_list { -+ /* in - # of elements, out - # of entries */ -+ uint32 count; -+ /* variable length uint32 list */ -+ uint32 element[1]; -+} wl_uint32_list_t; -+ -+typedef struct wlc_ssid { -+ uint32 SSID_len; -+ uchar SSID[32]; -+} wlc_ssid_t; -+ -+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ -+ -+typedef struct wl_channels_in_country { -+ uint32 buflen; -+ uint32 band; -+ char country_abbrev[WLC_CNTRY_BUF_SZ]; -+ uint32 count; -+ uint32 channel[1]; -+} wl_channels_in_country_t; -+ -+typedef struct wl_country_list { -+ uint32 buflen; -+ uint32 band_set; -+ uint32 band; -+ uint32 count; -+ char country_abbrev[1]; -+} wl_country_list_t; ++/* Do not support the (u)int64 types with strict ansi for GNU C */ ++#if defined(__GNUC__) && defined(__STRICT_ANSI__) ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++#endif + ++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode ++ * for singned or unsigned */ ++#if defined(__ICL) + -+/* -+* Maximum # of keys that wl driver supports in S/W. Keys supported -+* in H/W is less than or equal to WSEC_MAX_KEYS. -+*/ -+#define WSEC_MAX_KEYS 54 /* Max # of keys (50 + 4 default keys) */ -+#define WSEC_MAX_DEFAULT_KEYS 4 /* # of default keys */ ++#define TYPEDEF_INT64 + -+/* -+* Remove these two defines if access to crypto/tkhash.h -+* is unconditionally permitted. -+*/ -+#define TKHASH_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ -+#define TKHASH_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ -+ -+/* Enumerate crypto algorithms */ -+#define CRYPTO_ALGO_OFF 0 -+#define CRYPTO_ALGO_WEP1 1 -+#define CRYPTO_ALGO_TKIP 2 -+#define CRYPTO_ALGO_WEP128 3 -+#define CRYPTO_ALGO_AES_CCM 4 -+#define CRYPTO_ALGO_AES_OCB_MSDU 5 -+#define CRYPTO_ALGO_AES_OCB_MPDU 6 -+#define CRYPTO_ALGO_NALG 7 -+ -+/* For use with wlc_wep_key.flags */ -+#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -+#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate MIC error */ -+#define WSEC_REPLAY_ERROR (1 << 3) /* Provoke deliberate replay */ -+ -+#define WSEC_GEN_MIC_ERROR 0x0001 -+#define WSEC_GEN_REPLAY 0x0002 -+ -+typedef struct tkip_info { -+ uint16 phase1[TKHASH_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ -+ uint8 phase2[TKHASH_P2_KEY_SIZE]; /* tkhash phase2 result */ -+ uint32 micl; -+ uint32 micr; -+} tkip_info_t; -+ -+typedef struct wsec_iv { -+ uint32 hi; /* upper 32 bits of IV */ -+ uint16 lo; /* lower 16 bits of IV */ -+} wsec_iv_t; -+ -+typedef struct wsec_key { -+ uint32 index; /* key index */ -+ uint32 len; /* key length */ -+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ -+ tkip_info_t tkip_tx; /* tkip transmit state */ -+ tkip_info_t tkip_rx; /* tkip receive state */ -+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ -+ uint32 flags; /* misc flags */ -+ uint32 algo_hw; /* cache for hw register*/ -+ uint32 aes_mode; /* cache for hw register*/ -+ int iv_len; /* IV length */ -+ int iv_initialized; /* has IV been initialized already? */ -+ int icv_len; /* ICV length */ -+ wsec_iv_t rxiv; /* Rx IV */ -+ wsec_iv_t txiv; /* Tx IV */ -+ struct ether_addr ea; /* per station */ -+} wsec_key_t; -+ -+/* wireless security bitvec */ -+#define WEP_ENABLED 1 -+#define TKIP_ENABLED 2 -+#define AES_ENABLED 4 -+#define WSEC_SWFLAG 8 -+ -+#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) -+#define WSEC_HW(wsec) (!WSEC_SW(wsec)) -+#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) -+#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) -+#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) -+#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) -+ -+/* wireless authentication bit vector */ -+#define WPA_ENABLED 1 -+#define PSK_ENABLED 2 -+ -+#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) -+#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) -+#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) -+ -+/* group/mcast cipher */ -+#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ -+ ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ -+ WPA_CIPHER_NONE) -+ -+typedef struct wl_led_info { -+ uint32 index; /* led index */ -+ uint32 behavior; -+ bool activehi; -+} wl_led_info_t; ++#if defined(__STDC__) ++#define TYPEDEF_UINT64 ++#endif + -+/* -+ * definitions for driver messages passed from WL to NAS. -+ */ -+/* Use this to recognize wpa and 802.1x driver messages. */ -+static const uint8 wl_wpa_snap_template[] = -+ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; -+ -+#define WL_WPA_MSG_IFNAME_MAX 16 -+ -+/* WPA driver message */ -+typedef struct wl_wpa_header { -+ struct ether_header eth; -+ struct dot11_llc_snap_header snap; -+ uint8 version; -+ uint8 type; -+ /* version 2 additions */ -+ char ifname[WL_WPA_MSG_IFNAME_MAX]; -+ /* version specific data */ -+ /* uint8 data[1]; */ -+} wl_wpa_header_t PACKED; -+ -+#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) -+ -+/* WPA driver message ethertype - private between wlc and nas */ -+#define WL_WPA_ETHER_TYPE 0x9999 -+ -+/* WPA driver message current version */ -+#define WL_WPA_MSG_VERSION 2 -+ -+/* Type field values for the 802.2 driver messages for WPA. */ -+#define WLC_ASSOC_MSG 1 -+#define WLC_DISASSOC_MSG 2 -+#define WLC_PTK_MIC_MSG 3 -+#define WLC_GTK_MIC_MSG 4 -+ -+/* 802.1x driver message */ -+typedef struct wl_eapol_header { -+ struct ether_header eth; -+ struct dot11_llc_snap_header snap; -+ uint8 version; -+ uint8 reserved; -+ char ifname[WL_WPA_MSG_IFNAME_MAX]; -+ /* version specific data */ -+ /* uint8 802_1x_msg[1]; */ -+} wl_eapol_header_t PACKED; -+ -+#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) -+ -+/* 802.1x driver message ethertype - private between wlc and nas */ -+#define WL_EAPOL_ETHER_TYPE 0x999A -+ -+/* 802.1x driver message current version */ -+#define WL_EAPOL_MSG_VERSION 1 -+ -+/* srom read/write struct passed through ioctl */ -+typedef struct { -+ uint byteoff; /* byte offset */ -+ uint nbytes; /* number of bytes */ -+ uint16 buf[1]; -+} srom_rw_t; ++#endif /* __ICL */ + -+/* R_REG and W_REG struct passed through ioctl */ -+typedef struct { -+ uint32 byteoff; /* byte offset of the field in d11regs_t */ -+ uint32 val; /* read/write value of the field */ -+ uint32 size; /* sizeof the field */ -+} rw_reg_t; + -+/* Structure used by GET/SET_ATTEN ioctls */ -+typedef struct { -+ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ -+ uint16 bb; /* Baseband attenuation */ -+ uint16 radio; /* Radio attenuation */ -+ uint16 txctl1; /* Radio TX_CTL1 value */ -+} atten_t; ++#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) + -+/* Used to get specific STA parameters */ -+typedef struct { -+ uint32 val; -+ struct ether_addr ea; -+} scb_val_t; -+ -+/* callback registration data types */ -+ -+typedef struct _mac_event_params { -+ uint msg; -+ struct ether_addr *addr; -+ uint result; -+ uint status; -+ uint auth_type; -+} mac_event_params_t; -+ -+typedef struct _mic_error_params { -+ struct ether_addr *ea; -+ bool group; -+ bool flush_txq; -+} mic_error_params_t; -+ -+typedef enum _wl_callback { -+ WL_MAC_EVENT_CALLBACK = 0, -+ WL_LINK_UP_CALLBACK, -+ WL_LINK_DOWN_CALLBACK, -+ WL_MIC_ERROR_CALLBACK, -+ WL_LAST_CALLBACK -+} wl_callback_t; -+ -+typedef struct _callback { -+ void (*fn)(void *, void *); -+ void *context; -+} callback_t; -+ -+typedef struct _scan_callback { -+ void (*fn)(void *); -+ void *context; -+} scan_callback_t; -+ -+/* used to register an arbitrary callback via the IOCTL interface */ -+typedef struct _set_callback { -+ int index; -+ callback_t callback; -+} set_callback_t; ++/* pick up ushort & uint from standard types.h */ ++#if defined(linux) && defined(__KERNEL__) + -+/* -+ * Country locale determines which channels are available to us. -+ */ -+typedef enum _wlc_locale { -+ WLC_WW = 0, /* Worldwide */ -+ WLC_THA, /* Thailand */ -+ WLC_ISR, /* Israel */ -+ WLC_JDN, /* Jordan */ -+ WLC_PRC, /* China */ -+ WLC_JPN, /* Japan */ -+ WLC_FCC, /* USA */ -+ WLC_EUR, /* Europe */ -+ WLC_USL, /* US Low Band only */ -+ WLC_JPH, /* Japan High Band only */ -+ WLC_ALL, /* All the channels in this band */ -+ WLC_11D, /* Represents locale recieved by 11d beacons */ -+ WLC_LAST_LOCALE, -+ WLC_UNDEFINED_LOCALE = 0xf -+} wlc_locale_t; -+ -+/* channel encoding */ -+typedef struct channel_info { -+ int hw_channel; -+ int target_channel; -+ int scan_channel; -+} channel_info_t; -+ -+/* For ioctls that take a list of MAC addresses */ -+struct maclist { -+ uint count; /* number of MAC addresses */ -+ struct ether_addr ea[1]; /* variable length array of MAC addresses */ -+}; ++#include /* sys/types.h and linux/types.h are oil and water */ + -+/* get pkt count struct passed through ioctl */ -+typedef struct get_pktcnt { -+ uint rx_good_pkt; -+ uint rx_bad_pkt; -+ uint tx_good_pkt; -+ uint tx_bad_pkt; -+} get_pktcnt_t; -+ -+/* Linux network driver ioctl encoding */ -+typedef struct wl_ioctl { -+ int cmd; /* common ioctl definition */ -+ void *buf; /* pointer to user buffer */ -+ int len; /* length of user buffer */ -+} wl_ioctl_t; ++#else + -+/* -+ * Structure for passing hardware and software -+ * revision info up from the driver. -+ */ -+typedef struct wlc_rev_info { -+ uint vendorid; /* PCI vendor id */ -+ uint deviceid; /* device id of chip */ -+ uint radiorev; /* radio revision */ -+ uint chiprev; /* chip revision */ -+ uint corerev; /* core revision */ -+ uint boardid; /* board identifier (usu. PCI sub-device id) */ -+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ -+ uint boardrev; /* board revision */ -+ uint driverrev; /* driver version */ -+ uint ucoderev; /* microcode version */ -+ uint bus; /* bus type */ -+ uint chipnum; /* chip number */ -+} wlc_rev_info_t; -+ -+/* check this magic number */ -+#define WLC_IOCTL_MAGIC 0x14e46c77 -+ -+/* bump this number if you change the ioctl interface */ -+#define WLC_IOCTL_VERSION 1 -+ -+/* maximum length buffer required */ -+#define WLC_IOCTL_MAXLEN 8192 -+ -+/* common ioctl definitions */ -+#define WLC_GET_MAGIC 0 -+#define WLC_GET_VERSION 1 -+#define WLC_UP 2 -+#define WLC_DOWN 3 -+#define WLC_DUMP 6 -+#define WLC_GET_MSGLEVEL 7 -+#define WLC_SET_MSGLEVEL 8 -+#define WLC_GET_PROMISC 9 -+#define WLC_SET_PROMISC 10 -+#define WLC_GET_RATE 12 -+#define WLC_SET_RATE 13 -+#define WLC_GET_INSTANCE 14 -+#define WLC_GET_FRAG 15 -+#define WLC_SET_FRAG 16 -+#define WLC_GET_RTS 17 -+#define WLC_SET_RTS 18 -+#define WLC_GET_INFRA 19 -+#define WLC_SET_INFRA 20 -+#define WLC_GET_AUTH 21 -+#define WLC_SET_AUTH 22 -+#define WLC_GET_BSSID 23 -+#define WLC_SET_BSSID 24 -+#define WLC_GET_SSID 25 -+#define WLC_SET_SSID 26 -+#define WLC_RESTART 27 -+#define WLC_GET_CHANNEL 29 -+#define WLC_SET_CHANNEL 30 -+#define WLC_GET_SRL 31 -+#define WLC_SET_SRL 32 -+#define WLC_GET_LRL 33 -+#define WLC_SET_LRL 34 -+#define WLC_GET_PLCPHDR 35 -+#define WLC_SET_PLCPHDR 36 -+#define WLC_GET_RADIO 37 -+#define WLC_SET_RADIO 38 -+#define WLC_GET_PHYTYPE 39 -+#define WLC_GET_WEP 42 -+#define WLC_SET_WEP 43 -+#define WLC_GET_KEY 44 -+#define WLC_SET_KEY 45 -+#define WLC_SCAN 50 -+#define WLC_SCAN_RESULTS 51 -+#define WLC_DISASSOC 52 -+#define WLC_REASSOC 53 -+#define WLC_GET_ROAM_TRIGGER 54 -+#define WLC_SET_ROAM_TRIGGER 55 -+#define WLC_GET_TXANT 61 -+#define WLC_SET_TXANT 62 -+#define WLC_GET_ANTDIV 63 -+#define WLC_SET_ANTDIV 64 -+#define WLC_GET_TXPWR 65 -+#define WLC_SET_TXPWR 66 -+#define WLC_GET_CLOSED 67 -+#define WLC_SET_CLOSED 68 -+#define WLC_GET_MACLIST 69 -+#define WLC_SET_MACLIST 70 -+#define WLC_GET_RATESET 71 -+#define WLC_SET_RATESET 72 -+#define WLC_GET_LOCALE 73 -+#define WLC_SET_LOCALE 74 -+#define WLC_GET_BCNPRD 75 -+#define WLC_SET_BCNPRD 76 -+#define WLC_GET_DTIMPRD 77 -+#define WLC_SET_DTIMPRD 78 -+#define WLC_GET_SROM 79 -+#define WLC_SET_SROM 80 -+#define WLC_GET_WEP_RESTRICT 81 -+#define WLC_SET_WEP_RESTRICT 82 -+#define WLC_GET_COUNTRY 83 -+#define WLC_SET_COUNTRY 84 -+#define WLC_GET_REVINFO 98 -+#define WLC_GET_MACMODE 105 -+#define WLC_SET_MACMODE 106 -+#define WLC_GET_GMODE 109 -+#define WLC_SET_GMODE 110 -+#define WLC_GET_CURR_RATESET 114 /* current rateset */ -+#define WLC_GET_SCANSUPPRESS 115 -+#define WLC_SET_SCANSUPPRESS 116 -+#define WLC_GET_AP 117 -+#define WLC_SET_AP 118 -+#define WLC_GET_EAP_RESTRICT 119 -+#define WLC_SET_EAP_RESTRICT 120 -+#define WLC_GET_WDSLIST 123 -+#define WLC_SET_WDSLIST 124 -+#define WLC_GET_RSSI 127 -+#define WLC_GET_WSEC 133 -+#define WLC_SET_WSEC 134 -+#define WLC_GET_BSS_INFO 136 -+#define WLC_GET_LAZYWDS 138 -+#define WLC_SET_LAZYWDS 139 -+#define WLC_GET_BANDLIST 140 -+#define WLC_GET_BAND 141 -+#define WLC_SET_BAND 142 -+#define WLC_GET_SHORTSLOT 144 -+#define WLC_GET_SHORTSLOT_OVERRIDE 145 -+#define WLC_SET_SHORTSLOT_OVERRIDE 146 -+#define WLC_GET_SHORTSLOT_RESTRICT 147 -+#define WLC_SET_SHORTSLOT_RESTRICT 148 -+#define WLC_GET_GMODE_PROTECTION 149 -+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -+#define WLC_UPGRADE 152 -+#define WLC_GET_ASSOCLIST 159 -+#define WLC_GET_CLK 160 -+#define WLC_SET_CLK 161 -+#define WLC_GET_UP 162 -+#define WLC_OUT 163 -+#define WLC_GET_WPA_AUTH 164 -+#define WLC_SET_WPA_AUTH 165 -+#define WLC_GET_GMODE_PROTECTION_CONTROL 178 -+#define WLC_SET_GMODE_PROTECTION_CONTROL 179 -+#define WLC_GET_PHYLIST 180 -+#define WLC_GET_GMODE_PROTECTION_CTS 198 -+#define WLC_SET_GMODE_PROTECTION_CTS 199 -+#define WLC_GET_PIOMODE 203 -+#define WLC_SET_PIOMODE 204 -+#define WLC_SET_LED 209 -+#define WLC_GET_LED 210 -+#define WLC_GET_CHANNEL_SEL 215 -+#define WLC_START_CHANNEL_SEL 216 -+#define WLC_GET_VALID_CHANNELS 217 -+#define WLC_GET_FAKEFRAG 218 -+#define WLC_SET_FAKEFRAG 219 -+#define WLC_GET_WET 230 -+#define WLC_SET_WET 231 -+#define WLC_GET_KEY_PRIMARY 235 -+#define WLC_SET_KEY_PRIMARY 236 -+#define WLC_SCAN_WITH_CALLBACK 240 -+#define WLC_SET_CS_SCAN_TIMER 248 -+#define WLC_GET_CS_SCAN_TIMER 249 -+#define WLC_CURRENT_PWR 256 -+#define WLC_GET_CHANNELS_IN_COUNTRY 260 -+#define WLC_GET_COUNTRY_LIST 261 -+#define WLC_NVRAM_GET 264 -+#define WLC_NVRAM_SET 265 -+#define WLC_LAST 271 /* bump after adding */ ++#include + -+/* -+ * Minor kludge alert: -+ * Duplicate a few definitions that irelay requires from epiioctl.h here -+ * so caller doesn't have to include this file and epiioctl.h . -+ * If this grows any more, it would be time to move these irelay-specific -+ * definitions out of the epiioctl.h and into a separate driver common file. -+ */ -+#ifndef EPICTRL_COOKIE -+#define EPICTRL_COOKIE 0xABADCEDE +#endif + -+/* vx wlc ioctl's offset */ -+#define CMN_IOCTL_OFF 0x180 ++#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ */ + -+/* -+ * custom OID support -+ * -+ * 0xFF - implementation specific OID -+ * 0xE4 - first byte of Broadcom PCI vendor ID -+ * 0x14 - second byte of Broadcom PCI vendor ID -+ * 0xXX - the custom OID number -+ */ -+ -+/* begin 0x1f values beyond the start of the ET driver range. */ -+#define WL_OID_BASE 0xFFE41420 ++#if defined(MACOSX) && defined(KERNEL) ++#include ++#endif + -+/* NDIS overrides */ -+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) + -+#define WL_DECRYPT_STATUS_SUCCESS 1 -+#define WL_DECRYPT_STATUS_FAILURE 2 -+#define WL_DECRYPT_STATUS_UNKNOWN 3 ++/* use the default typedefs in the next section of this file */ ++#define USE_TYPEDEF_DEFAULTS + -+/* allows user-mode app to poll the status of USB image upgrade */ -+#define WLC_UPGRADE_SUCCESS 0 -+#define WLC_UPGRADE_PENDING 1 ++#endif /* SITE_TYPEDEFS */ + -+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -+#define WL_RADIO_SW_DISABLE (1<<0) -+#define WL_RADIO_HW_DISABLE (1<<1) + -+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -+#define WL_TXPWR_OVERRIDE (1<<31) ++/******************************************************************************* ++ * Default Typedefs ++ *******************************************************************************/ + ++#ifdef USE_TYPEDEF_DEFAULTS ++#undef USE_TYPEDEF_DEFAULTS + -+/* Bus types */ -+#define WL_SB_BUS 0 /* Silicon Backplane */ -+#define WL_PCI_BUS 1 /* PCI target */ -+#define WL_PCMCIA_BUS 2 /* PCMCIA target */ ++#ifndef TYPEDEF_BOOL ++typedef /*@abstract@*/ unsigned char bool; ++#endif + -+/* band types */ -+#define WLC_BAND_AUTO 0 /* auto-select */ -+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ -+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ ++/*----------------------- define uchar, ushort, uint, ulong ------------------*/ + -+/* MAC list modes */ -+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ ++#ifndef TYPEDEF_UCHAR ++typedef unsigned char uchar; ++#endif + -+/* -+ * -+ */ -+#define GMODE_LEGACY_B 0 -+#define GMODE_AUTO 1 -+#define GMODE_ONLY 2 -+#define GMODE_B_DEFERRED 3 -+#define GMODE_PERFORMANCE 4 -+#define GMODE_LRS 5 -+#define GMODE_MAX 6 ++#ifndef TYPEDEF_USHORT ++typedef unsigned short ushort; ++#endif + -+/* values for PLCPHdr_override */ -+#define WLC_PLCP_AUTO -1 -+#define WLC_PLCP_SHORT 0 -+#define WLC_PLCP_LONG 1 ++#ifndef TYPEDEF_UINT ++typedef unsigned int uint; ++#endif + -+/* values for g_protection_override */ -+#define WLC_G_PROTECTION_AUTO -1 -+#define WLC_G_PROTECTION_OFF 0 -+#define WLC_G_PROTECTION_ON 1 ++#ifndef TYPEDEF_ULONG ++typedef unsigned long ulong; ++#endif + -+/* values for g_protection_control */ -+#define WLC_G_PROTECTION_CTL_OFF 0 -+#define WLC_G_PROTECTION_CTL_LOCAL 1 -+#define WLC_G_PROTECTION_CTL_OVERLAP 2 ++/*----------------------- define [u]int8/16/32/64, uintptr --------------------*/ + ++#ifndef TYPEDEF_UINT8 ++typedef unsigned char uint8; ++#endif + ++#ifndef TYPEDEF_UINT16 ++typedef unsigned short uint16; ++#endif + ++#ifndef TYPEDEF_UINT32 ++typedef unsigned int uint32; ++#endif + ++#ifndef TYPEDEF_UINT64 ++typedef unsigned long long uint64; ++#endif + ++#ifndef TYPEDEF_UINTPTR ++typedef unsigned int uintptr; ++#endif + -+/* max # of leds supported by GPIO (gpio pin# == led index#) */ -+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ ++#ifndef TYPEDEF_INT8 ++typedef signed char int8; ++#endif + -+/* led per-pin behaviors */ -+#define WL_LED_OFF 0 /* always off */ -+#define WL_LED_ON 1 /* always on */ -+#define WL_LED_ACTIVITY 2 /* activity */ -+#define WL_LED_RADIO 3 /* radio enabled */ -+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -+#define WL_LED_WI1 7 -+#define WL_LED_WI2 8 -+#define WL_LED_WI3 9 -+#define WL_LED_ASSOC 10 /* associated state indicator */ -+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -+#define WL_LED_NUMBEHAVIOR 12 ++#ifndef TYPEDEF_INT16 ++typedef signed short int16; ++#endif + -+/* led behavior numeric value format */ -+#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ ++#ifndef TYPEDEF_INT32 ++typedef signed int int32; ++#endif + ++#ifndef TYPEDEF_INT64 ++typedef signed long long int64; ++#endif + -+/* rate check */ -+#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ -+ ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ -+ ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ -+ ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) ++/*----------------------- define float32/64, float_t -----------------------*/ + ++#ifndef TYPEDEF_FLOAT32 ++typedef float float32; ++#endif + -+#undef PACKED ++#ifndef TYPEDEF_FLOAT64 ++typedef double float64; ++#endif + -+#endif /* _wlioctl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S ---- linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S 2005-08-28 16:58:08.027788792 +0200 -@@ -0,0 +1,48 @@ +/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * abstracted floating point type allows for compile time selection of ++ * single or double precision arithmetic. Compiling with -DFLOAT32 ++ * selects single precision; the default is double precision. + */ + -+#include -+#include -+#include -+#include -+ -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ -+ NESTED(bcm47xx_irq_handler, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ -+ .set at -+ .set noreorder ++#ifndef TYPEDEF_FLOAT_T + -+ jal bcm47xx_irq_dispatch -+ move a0, sp ++#if defined(FLOAT32) ++typedef float32 float_t; ++#else /* default to double precision floating point */ ++typedef float64 float_t; ++#endif + -+ j ret_from_irq -+ nop -+ -+ END(bcm47xx_irq_handler) -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/irq.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c ---- linux-2.6.12.5/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c 2005-08-28 16:58:26.178029536 +0200 -@@ -0,0 +1,68 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ ++#endif /* TYPEDEF_FLOAT_T */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/*----------------------- define macro values -----------------------------*/ + -+#include -+#include -+#include -+#include -+#include ++#ifndef FALSE ++#define FALSE 0 ++#endif + -+extern asmlinkage void bcm47xx_irq_handler(void); ++#ifndef TRUE ++#define TRUE 1 ++#endif + -+void bcm47xx_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; ++#ifndef NULL ++#define NULL 0 ++#endif + -+ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; ++#ifndef OFF ++#define OFF 0 ++#endif + -+ clear_c0_status(cause); ++#ifndef ON ++#define ON 1 ++#endif + -+ if (cause & CAUSEF_IP7) -+ do_IRQ(7, regs); -+ if (cause & CAUSEF_IP2) -+ do_IRQ(2, regs); -+ if (cause & CAUSEF_IP3) -+ do_IRQ(3, regs); -+ if (cause & CAUSEF_IP4) -+ do_IRQ(4, regs); -+ if (cause & CAUSEF_IP5) -+ do_IRQ(5, regs); -+ if (cause & CAUSEF_IP6) -+ do_IRQ(6, regs); -+} ++#define AUTO (-1) + -+void __init arch_init_irq(void) -+{ -+ set_except_vector(0, bcm47xx_irq_handler); -+ mips_cpu_irq_init(0); -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/prom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c ---- linux-2.6.12.5/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c 2005-08-28 16:58:41.789656208 +0200 -@@ -0,0 +1,59 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ ++/* Reclaiming text and data : ++ The following macros specify special linker sections that can be reclaimed ++ after a system is considered 'up'. ++ */ ++#if defined(__GNUC__) && defined(BCMRECLAIM) ++extern bool bcmreclaimed; ++#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data##_ini ++#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn##_ini ++#define BCMINIT(_id) _id##_ini ++#else ++#define BCMINITDATA(_data) _data ++#define BCMINITFN(_fn) _fn ++#define BCMINIT(_id) _id ++#define bcmreclaimed 0 ++#endif + -+#include -+#include -+#include -+#include ++/*----------------------- define PTRSZ, INLINE ----------------------------*/ + -+#include -+#include -+#include ++#ifndef PTRSZ ++#define PTRSZ sizeof (char*) ++#endif + -+const char *get_system_type(void) -+{ -+ return "Broadcom BCM47xx"; -+} ++#ifndef INLINE + -+void __init prom_init(void) -+{ -+ unsigned long mem; ++#ifdef _MSC_VER + -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM47XX; ++#define INLINE __inline + -+ /* Figure out memory size by finding aliases */ -+ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { -+ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == -+ *(unsigned long *)(prom_init)) -+ break; -+ } ++#elif __GNUC__ + -+ add_memory_region(0, mem, BOOT_MEM_RAM); -+} ++#define INLINE __inline__ + -+unsigned long __init prom_free_prom_memory(void) -+{ -+ return 0; -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/setup.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c ---- linux-2.6.12.5/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c 2005-08-28 16:57:28.317825624 +0200 -@@ -0,0 +1,127 @@ ++#else ++ ++#define INLINE ++ ++#endif /* _MSC_VER */ ++ ++#endif /* INLINE */ ++ ++#undef TYPEDEF_BOOL ++#undef TYPEDEF_UCHAR ++#undef TYPEDEF_USHORT ++#undef TYPEDEF_UINT ++#undef TYPEDEF_ULONG ++#undef TYPEDEF_UINT8 ++#undef TYPEDEF_UINT16 ++#undef TYPEDEF_UINT32 ++#undef TYPEDEF_UINT64 ++#undef TYPEDEF_UINTPTR ++#undef TYPEDEF_INT8 ++#undef TYPEDEF_INT16 ++#undef TYPEDEF_INT32 ++#undef TYPEDEF_INT64 ++#undef TYPEDEF_FLOAT32 ++#undef TYPEDEF_FLOAT64 ++#undef TYPEDEF_FLOAT_T ++ ++#endif /* USE_TYPEDEF_DEFAULTS */ ++ ++#endif /* _TYPEDEFS_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/int-handler.S linux.dev/arch/mips/bcm947xx/int-handler.S +--- linux.old/arch/mips/bcm947xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/int-handler.S 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,48 @@ +/* + * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) + * @@ -12613,113 +11122,34 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/setup.c linux-2.6.12.5-brcm/arch/mip + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if 1 -+ -+#define SER_PORT1(reg) (*((volatile unsigned char *)(0xb8000400+reg))) -+ -+int putDebugChar(char c) -+{ -+ while (!(SER_PORT1(UART_LSR) & UART_LSR_THRE)); -+ SER_PORT1(UART_TX) = c; -+ -+ return 1; -+} -+ -+char getDebugChar(void) -+{ -+ while (!(SER_PORT1(UART_LSR) & 1)); -+ return SER_PORT1(UART_RX); -+} -+ -+ -+static int ser_line = 0; -+ -+static void -+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) -+{ -+ struct uart_port s; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ s.line = ser_line++; -+ s.membase = regs; -+ s.irq = irq + 2; -+ s.uartclk = baud_base; -+ s.flags = ASYNC_BOOT_AUTOCONF; -+ s.iotype = SERIAL_IO_MEM; -+ s.regshift = reg_shift; -+ -+ if (early_serial_setup(&s) != 0) { -+ printk(KERN_ERR "Serial setup failed!\n"); -+ } -+} -+#endif -+ -+extern void bcm47xx_time_init(void); -+extern void bcm47xx_timer_setup(struct irqaction *irq); -+ -+void *nvram_get(char *foo) -+{ -+ return NULL; -+} -+ -+void *sbh; -+ -+static void bcm47xx_machine_restart(char *command) -+{ -+ /* Set the watchdog timer to reset immediately */ -+ cli(); -+ sb_watchdog(sbh, 1); -+ while (1); -+} ++#include ++#include ++#include ++#include + -+static void bcm47xx_machine_halt(void) -+{ -+ /* Disable interrupts and watchdog and spin forever */ -+ cli(); -+ sb_watchdog(sbh, 0); -+ while (1); -+} ++ .text ++ .set noreorder ++ .set noat ++ .align 5 + -+static int __init bcm47xx_init(void) -+{ ++ NESTED(bcm47xx_irq_handler, PT_SIZE, sp) ++ SAVE_ALL ++ CLI + -+ sbh = sb_kattach(); -+ sb_mips_init(sbh); -+ sbpci_init(sbh); -+ sb_serial_init(sbh, serial_add); ++ .set at ++ .set noreorder + -+ _machine_restart = bcm47xx_machine_restart; -+ _machine_halt = bcm47xx_machine_halt; -+ _machine_power_off = bcm47xx_machine_halt; -+ -+ board_time_init = bcm47xx_time_init; -+ board_timer_setup = bcm47xx_timer_setup; -+ -+ return 0; -+} ++ jal bcm47xx_irq_dispatch ++ move a0, sp + -+early_initcall(bcm47xx_init); -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/time.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c ---- linux-2.6.12.5/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c 2005-08-28 16:57:55.440702320 +0200 -@@ -0,0 +1,59 @@ ++ j ret_from_irq ++ nop ++ ++ END(bcm47xx_irq_handler) +diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c +--- linux.old/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/irq.c 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,67 @@ +/* + * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) + * @@ -12745,228 +11175,94 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/time.c linux-2.6.12.5-brcm/arch/mips + */ + +#include ++#include +#include -+#include -+#include -+#include +#include -+#include -+#include -+#include -+ -+void __init -+bcm47xx_time_init(void) -+{ -+ unsigned int hz; -+ -+ /* -+ * Use deterministic values for initial counter interrupt -+ * so that calibrate delay avoids encountering a counter wrap. -+ */ -+ write_c0_count(0); -+ write_c0_compare(0xffff); -+ -+ hz = 200 * 1000 * 1000; -+ -+ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ -+ mips_hpt_frequency = hz / 2; -+ -+} -+ -+void __init -+bcm47xx_timer_setup(struct irqaction *irq) -+{ -+ /* Enable the timer interrupt */ -+ setup_irq(7, irq); -+} -diff -Nur linux-2.6.12.5/arch/mips/kernel/cpu-probe.c linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c ---- linux-2.6.12.5/arch/mips/kernel/cpu-probe.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c 2005-08-28 11:12:20.538842736 +0200 -@@ -555,6 +555,28 @@ - } - } - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_BCM3302: -+ c->cputype = CPU_BCM3302; -+ c->isa_level = MIPS_CPU_ISA_M32; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ break; -+ case PRID_IMP_BCM4710: -+ c->cputype = CPU_BCM4710; -+ c->isa_level = MIPS_CPU_ISA_M32; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - __init void cpu_probe(void) - { - struct cpuinfo_mips *c = ¤t_cpu_data; -@@ -577,7 +599,9 @@ - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; -- -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_SANDCRAFT: - cpu_probe_sandcraft(c); - break; -diff -Nur linux-2.6.12.5/arch/mips/kernel/head.S linux-2.6.12.5-brcm/arch/mips/kernel/head.S ---- linux-2.6.12.5/arch/mips/kernel/head.S 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/kernel/head.S 2005-08-28 11:12:20.539842584 +0200 -@@ -122,6 +122,14 @@ - #endif - .endm - -+#ifdef CONFIG_BCM4710 -+#undef eret -+#define eret nop; nop; eret -+#endif -+ -+ j kernel_entry -+ nop ++#include ++#include ++#include ++#include + - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. -diff -Nur linux-2.6.12.5/arch/mips/kernel/proc.c linux-2.6.12.5-brcm/arch/mips/kernel/proc.c ---- linux-2.6.12.5/arch/mips/kernel/proc.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/kernel/proc.c 2005-08-28 11:12:20.553840456 +0200 -@@ -75,7 +75,9 @@ - [CPU_VR4133] "NEC VR4133", - [CPU_VR4181] "NEC VR4181", - [CPU_VR4181A] "NEC VR4181A", -- [CPU_SR71000] "Sandcraft SR71000" -+ [CPU_SR71000] "Sandcraft SR71000", -+ [CPU_BCM3302] "Broadcom BCM3302", -+ [CPU_BCM4710] "Broadcom BCM4710" - }; - - -diff -Nur linux-2.6.12.5/arch/mips/mm/tlbex.c linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c ---- linux-2.6.12.5/arch/mips/mm/tlbex.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c 2005-08-28 11:12:20.587835288 +0200 -@@ -851,6 +851,8 @@ - case CPU_4KSC: - case CPU_20KC: - case CPU_25KF: -+ case CPU_BCM3302: -+ case CPU_BCM4710: - tlbw(p); - break; - -diff -Nur linux-2.6.12.5/arch/mips/pci/Makefile linux-2.6.12.5-brcm/arch/mips/pci/Makefile ---- linux-2.6.12.5/arch/mips/pci/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/pci/Makefile 2005-08-28 16:41:44.565297816 +0200 -@@ -18,6 +18,7 @@ - obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o - obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o - obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o -+obj-$(CONFIG_BCM947XX) += ops-sb.o fixup-bcm47xx.o pci-bcm47xx.o - - # - # These are still pretty much in the old state, watch, go blind. -diff -Nur linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c ---- linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c 2005-08-28 11:12:20.611831640 +0200 -@@ -0,0 +1,23 @@ -+#include -+#include ++#include ++#include ++#include ++#include + -+/* Do platform specific device initialization at pci_enable_device() time */ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ return 0; -+} ++extern asmlinkage void bcm47xx_irq_handler(void); + -+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++void bcm47xx_irq_dispatch(struct pt_regs *regs) +{ -+ u8 irq; -+ -+ if (dev->bus->number == 1) -+ return 2; ++ u32 cause; + -+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); -+ return irq + 2; ++ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; ++ ++ clear_c0_status(cause); ++ ++ if (cause & CAUSEF_IP7) ++ do_IRQ(7, regs); ++ if (cause & CAUSEF_IP2) ++ do_IRQ(2, regs); ++ if (cause & CAUSEF_IP3) ++ do_IRQ(3, regs); ++ if (cause & CAUSEF_IP4) ++ do_IRQ(4, regs); ++ if (cause & CAUSEF_IP5) ++ do_IRQ(5, regs); ++ if (cause & CAUSEF_IP6) ++ do_IRQ(6, regs); +} + -+struct pci_fixup pcibios_fixups[] __initdata = { -+ { 0 } -+}; -diff -Nur linux-2.6.12.5/arch/mips/pci/ops-sb.c linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c ---- linux-2.6.12.5/arch/mips/pci/ops-sb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c 2005-08-28 11:12:20.612831488 +0200 -@@ -0,0 +1,44 @@ ++void __init arch_init_irq(void) ++{ ++ set_except_vector(0, bcm47xx_irq_handler); ++ mips_cpu_irq_init(0); ++} +diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c +--- linux.old/arch/mips/bcm947xx/pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/pci.c 2005-12-17 18:11:52.350836000 +0100 +@@ -0,0 +1,92 @@ +#include +#include +#include +#include -+#include ++ ++#include ++#include + +#include ++#include ++#include ++#include ++#include +#include + -+extern void *sbh; -+//extern spinlock_t bcm47xx_sbh_lock; ++extern sb_t *sbh; ++ + +static int +sb_pci_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) ++ int reg, int size, u32 *val) +{ -+ //unsigned long flags; + int ret; -+ -+ -+ //spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size); -+ //spin_unlock_irqrestore(&sbh_lock, flags); -+ + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int +sb_pci_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) ++ int reg, int size, u32 val) +{ -+// unsigned long flags; + int ret; -+ -+// spin_lock_irqsave(&sbh_lock, flags); + ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size); -+// spin_unlock_irqrestore(&sbh_lock, flags); + return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+struct pci_ops sb_pci_ops = { -+ .read = sb_pci_read_config, -+ .write = sb_pci_write_config, -+}; -diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c ---- linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c 2005-08-28 11:12:20.612831488 +0200 -@@ -0,0 +1,61 @@ -+#include -+#include -+#include -+ -+#include -+#include + -+#include -+#include ++static struct pci_ops sb_pci_ops = { ++ .read = sb_pci_read_config, ++ .write = sb_pci_write_config, ++}; + -+extern struct pci_ops sb_pci_ops; + +static struct resource sb_pci_mem_resource = { + .name = "SB PCI Memory resources", @@ -12984,15 +11280,14 @@ diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mi + +static struct pci_controller bcm47xx_sb_pci_controller = { + .pci_ops = &sb_pci_ops, -+ .mem_resource = &sb_pci_mem_resource, -+ .io_resource = &sb_pci_io_resource, ++ .mem_resource = &sb_pci_mem_resource, ++ .io_resource = &sb_pci_io_resource, +}; + +static struct resource ext_pci_mem_resource = { + .name = "Ext PCI Memory resources", -+ .start = SB_PCI_DMA, -+// .end = 0x7FFFFFFF, -+ .end = 0x40FFFFFF, ++ .start = 0x40000000, ++ .end = 0x40ffffff, + .flags = IORESOURCE_MEM, +}; + @@ -13005,67 +11300,25 @@ diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mi + +static struct pci_controller bcm47xx_ext_pci_controller = { + .pci_ops = &sb_pci_ops, -+ .mem_resource = &ext_pci_mem_resource, -+ .io_resource = &ext_pci_io_resource, ++ .mem_resource = &ext_pci_mem_resource, ++ .io_resource = &ext_pci_io_resource, +}; + -+static int __init bcm47xx_pci_init(void) ++void bcm47xx_pci_init(void) +{ ++ sbpci_init(sbh); ++ ++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); ++ + register_pci_controller(&bcm47xx_sb_pci_controller); + register_pci_controller(&bcm47xx_ext_pci_controller); -+ return 0; +} -+ -+early_initcall(bcm47xx_pci_init); -diff -Nur linux-2.6.12.5/arch/mips/pci/pci.c linux-2.6.12.5-brcm/arch/mips/pci/pci.c ---- linux-2.6.12.5/arch/mips/pci/pci.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/pci/pci.c 2005-08-28 11:12:20.629828904 +0200 -@@ -238,7 +238,8 @@ - if (dev->resource[i].flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (dev->resource[i].flags & IORESOURCE_MEM) -- offset = hose->mem_offset; -+ offset = 0x26000000; -+ // offset = hose->mem_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; -diff -Nur linux-2.6.12.5/drivers/mtd/maps/Kconfig linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig ---- linux-2.6.12.5/drivers/mtd/maps/Kconfig 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig 2005-08-28 16:21:23.595930936 +0200 -@@ -357,6 +357,12 @@ - Mapping for the Flaga digital module. If you don't have one, ignore - this setting. - -+config MTD_BCM47XX -+ tristate "BCM47xx flash device" -+ depends on MIPS && MTD_CFI && BCM947XX -+ help -+ Support for the flash chips on the BCM947xx board. -+ - config MTD_BEECH - tristate "CFI Flash device mapped on IBM 405LP Beech" - depends on MTD_CFI && PPC32 && 40x && BEECH -diff -Nur linux-2.6.12.5/drivers/mtd/maps/Makefile linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile ---- linux-2.6.12.5/drivers/mtd/maps/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile 2005-08-28 11:12:20.666823280 +0200 -@@ -31,6 +31,7 @@ - obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o - obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o - obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o -+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o - obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o - obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o - obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o -diff -Nur linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c ---- linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c 2005-09-04 04:50:19.246786848 +0200 -@@ -0,0 +1,249 @@ +diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c +--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/prom.c 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,59 @@ +/* + * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * Copyright (C) 2005 Waldemar Brodkorb -+ * -+ * original functions for finding root filesystem from Mike Baker + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the @@ -13086,993 +11339,404 @@ diff -Nur linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.12.5-brcm/dr + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: bcm47xx-flash.c,v 1.1 2004/10/21 07:18:31 jolt Exp $ -+ * -+ * Flash mapping for BCM947XX boards + */ + +#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_MTD_PARTITIONS -+extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size); -+#endif -+ -+#define CFE_SIZE 1024*384 -+#define NVRAM_SIZE 1024*128 -+ -+#define WINDOW_ADDR 0x1c000000 -+#define WINDOW_SIZE (0x400000*2) -+#define BUSWIDTH 2 ++#include ++#include ++#include + -+static struct mtd_info *bcm947xx_mtd; ++#include ++#include ++#include + -+static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) ++const char *get_system_type(void) +{ -+#define MIPS_MEMCPY_ALIGN 4 -+ map_word ret; -+ ssize_t transfer; -+ ssize_t done = 0; -+ if ((len >= MIPS_MEMCPY_ALIGN) && (!(from & (MIPS_MEMCPY_ALIGN - 1))) && (!(((unsigned int)to & (MIPS_MEMCPY_ALIGN - 1))))) { -+ done = len & ~(MIPS_MEMCPY_ALIGN - 1); -+ memcpy_fromio(to, map->virt + from, done); -+ } -+ while (done < len) { -+ ret = map->read(map, from + done); -+ transfer = len - done; -+ if (transfer > map->bankwidth) -+ transfer = map->bankwidth; -+ memcpy((void *)((unsigned long)to + done), &ret.x[0], transfer); -+ done += transfer; -+ } ++ return "Broadcom BCM47xx"; +} + -+static struct map_info bcm947xx_map = { -+ name: "Physically mapped flash", -+ size: WINDOW_SIZE, -+ bankwidth: BUSWIDTH, -+ phys: WINDOW_ADDR, -+}; -+ -+#ifdef CONFIG_MTD_PARTITIONS -+ -+static struct mtd_partition bcm947xx_parts[] = { -+ { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, }, -+ { name: "linux", offset: 0, size: 0, }, -+ { name: "rootfs", offset: 0, size: 0, }, -+ { name: "nvram", offset: 0, size: 0, }, -+ { name: "OpenWrt", offset: 0, size: 0, }, -+ { name: NULL, }, -+}; -+ -+static int __init -+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part) ++void __init prom_init(void) +{ -+ struct trx_header *trx; -+ unsigned char buf[512]; -+ int off; -+ size_t len; -+ -+ trx = (struct trx_header *) buf; -+ -+ for (off = (512*1024); off < size; off += mtd->erasesize) { -+ memset(buf, 0xe5, sizeof(buf)); -+ -+ /* -+ * Read into buffer -+ */ -+ if (MTD_READ(mtd, off, sizeof(buf), &len, buf) || -+ len != sizeof(buf)) -+ continue; -+ -+ /* found a TRX header */ -+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) { -+ part->offset = le32_to_cpu(trx->offsets[2]) ? : -+ le32_to_cpu(trx->offsets[1]); -+ part->size = le32_to_cpu(trx->len); ++ unsigned long mem; + -+ part->size -= part->offset; -+ part->offset += off; ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM47XX; + -+ goto done; -+ } ++ /* Figure out memory size by finding aliases */ ++ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { ++ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == ++ *(unsigned long *)(prom_init)) ++ break; + } + -+ printk(KERN_NOTICE -+ "%s: Couldn't find root filesystem\n", -+ mtd->name); -+ return -1; -+ -+ done: -+ return part->size; ++ add_memory_region(0, mem, BOOT_MEM_RAM); +} + -+struct mtd_partition * __init -+init_mtd_partitions(struct mtd_info *mtd, size_t size) ++unsigned long __init prom_free_prom_memory(void) +{ ++ return 0; ++} +diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c +--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/setup.c 2005-12-17 22:14:27.619043750 +0100 +@@ -0,0 +1,155 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * Copyright (C) 2005 Waldemar Brodkorb ++ * Copyright (C) 2005 Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+ /* boot loader */ -+ bcm947xx_parts[0].offset = 0; -+ bcm947xx_parts[0].size = CFE_SIZE; ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ /* nvram (old config partition) */ -+ bcm947xx_parts[3].offset = bcm947xx_parts[0].size; -+ bcm947xx_parts[3].size = NVRAM_SIZE; ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ /* Size linux (kernel and rootfs) */ -+ bcm947xx_parts[1].offset = bcm947xx_parts[0].size + bcm947xx_parts[3].size; -+ bcm947xx_parts[1].size = size - NVRAM_SIZE - bcm947xx_parts[0].size - bcm947xx_parts[3].size; ++extern void bcm47xx_pci_init(void); ++extern void bcm47xx_time_init(void); ++extern void bcm47xx_timer_setup(struct irqaction *irq); ++void *sbh; ++int boardflags; + -+ /* Find and size rootfs */ -+ if (find_root(mtd,size,&bcm947xx_parts[2])==0) { -+ /* entirely jffs2 */ -+ bcm947xx_parts[2].size = bcm947xx_parts[3].offset - bcm947xx_parts[2].offset; -+ bcm947xx_parts[4].name = NULL; -+ } else { -+ /* legacy setup */ -+ /* calculate leftover flash, and assign it to the jffs2 partition */ -+ bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + bcm947xx_parts[2].size; -+ if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) { -+ bcm947xx_parts[4].offset += mtd->erasesize - -+ (bcm947xx_parts[4].offset % mtd->erasesize); -+ bcm947xx_parts[4].size = size - NVRAM_SIZE - bcm947xx_parts[4].offset; -+ } else { -+ bcm947xx_parts[4].size = bcm947xx_parts[3].offset - bcm947xx_parts[4].offset; -+ } -+ } ++static int ser_line = 0; + -+ return bcm947xx_parts; -+} ++typedef struct { ++ void *regs; ++ uint irq; ++ uint baud_base; ++ uint reg_shift; ++} serial_port; + -+EXPORT_SYMBOL(init_mtd_partitions); -+#endif ++static serial_port ports[4]; ++static int num_ports = 0; + -+int __init init_bcm947xx_map(void) ++static void ++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) +{ -+ size_t size; -+ int ret = 0; -+#ifdef CONFIG_MTD_PARTITIONS -+ struct mtd_partition *parts; -+ int i; -+#endif -+ -+ bcm947xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); ++ ports[num_ports].regs = regs; ++ ports[num_ports].irq = irq; ++ ports[num_ports].baud_base = baud_base; ++ ports[num_ports].reg_shift = reg_shift; ++ num_ports++; ++} + -+ if (!bcm947xx_map.virt) { -+ printk("Failed to ioremap\n"); -+ return -EIO; -+ } -+ simple_map_init(&bcm947xx_map); -+ -+ bcm947xx_map.copy_from = bcm947xx_map_copy_from; ++static void ++do_serial_add(serial_port *port) ++{ ++ void *regs; ++ uint irq; ++ uint baud_base; ++ uint reg_shift; ++ struct uart_port s; + -+ if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { -+ printk("Failed to do_map_probe\n"); -+ iounmap((void *)bcm947xx_map.virt); -+ return -ENXIO; -+ } ++ regs = port->regs; ++ irq = port->irq; ++ baud_base = port->baud_base; ++ reg_shift = port->reg_shift; + -+ bcm947xx_mtd->owner = THIS_MODULE; -+ -+ size = bcm947xx_mtd->size; ++ memset(&s, 0, sizeof(s)); + -+ printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", bcm947xx_mtd->size, WINDOW_ADDR); ++ s.line = ser_line++; ++ s.membase = regs; ++ s.irq = irq + 2; ++ s.uartclk = baud_base; ++ s.flags = ASYNC_BOOT_AUTOCONF; ++ s.iotype = SERIAL_IO_MEM; ++ s.regshift = reg_shift; + -+#ifdef CONFIG_MTD_PARTITIONS -+ parts = init_mtd_partitions(bcm947xx_mtd, size); -+ for (i = 0; parts[i].name; i++); -+ ret = add_mtd_partitions(bcm947xx_mtd, parts, i); -+ if (ret) { -+ printk(KERN_ERR "Flash: add_mtd_partitions failed\n"); -+ goto fail; ++ if (early_serial_setup(&s) != 0) { ++ printk(KERN_ERR "Serial setup failed!\n"); + } -+#endif -+ -+ return 0; -+ -+ fail: -+ if (bcm947xx_mtd) -+ map_destroy(bcm947xx_mtd); -+ if (bcm947xx_map.map_priv_1) -+ iounmap((void *) bcm947xx_map.map_priv_1); -+ bcm947xx_map.map_priv_1 = 0; -+ return ret; +} -+ -+void __exit cleanup_bcm947xx_map(void) -+{ -+#ifdef CONFIG_MTD_PARTITIONS -+ del_mtd_partitions(bcm947xx_mtd); -+#endif -+ map_destroy(bcm947xx_mtd); -+ iounmap((void *)bcm947xx_map.virt); -+} -+ -+module_init(init_bcm947xx_map); -+module_exit(cleanup_bcm947xx_map); -diff -Nur linux-2.6.12.5/drivers/net/b44.c linux-2.6.12.5-brcm/drivers/net/b44.c ---- linux-2.6.12.5/drivers/net/b44.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/net/b44.c 2005-08-28 11:12:20.691819480 +0200 -@@ -1,7 +1,8 @@ --/* b44.c: Broadcom 4400 device driver. -+/* b44.c: Broadcom 4400/47xx device driver. - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) -- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * - * Distribute under GPL. - */ -@@ -78,7 +79,7 @@ - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; - - MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); --MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); -+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver"); - MODULE_LICENSE("GPL"); - MODULE_VERSION(DRV_MODULE_VERSION); - -@@ -93,6 +94,8 @@ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { } /* terminate list with empty entry */ - }; - -@@ -106,24 +109,13 @@ - static void b44_poll_controller(struct net_device *dev); - #endif - --static inline unsigned long br32(const struct b44 *bp, unsigned long reg) --{ -- return readl(bp->regs + reg); --} -- --static inline void bw32(const struct b44 *bp, -- unsigned long reg, unsigned long val) --{ -- writel(val, bp->regs + reg); --} -- - static int b44_wait_bit(struct b44 *bp, unsigned long reg, - u32 bit, unsigned long timeout, const int clear) - { - unsigned long i; - - for (i = 0; i < timeout; i++) { -- u32 val = br32(bp, reg); -+ u32 val = br32(reg); - - if (clear && !(val & bit)) - break; -@@ -154,7 +146,7 @@ - - static u32 ssb_get_core_rev(struct b44 *bp) - { -- return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); -+ return (br32(B44_SBIDHIGH) & SBIDHIGH_RC_MASK); - } - - static u32 ssb_pci_setup(struct b44 *bp, u32 cores) -@@ -165,13 +157,13 @@ - pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); - pci_rev = ssb_get_core_rev(bp); - -- val = br32(bp, B44_SBINTVEC); -+ val = br32(B44_SBINTVEC); - val |= cores; -- bw32(bp, B44_SBINTVEC, val); -+ bw32(B44_SBINTVEC, val); - -- val = br32(bp, SSB_PCI_TRANS_2); -+ val = br32(SSB_PCI_TRANS_2); - val |= SSB_PCI_PREF | SSB_PCI_BURST; -- bw32(bp, SSB_PCI_TRANS_2, val); -+ bw32(SSB_PCI_TRANS_2, val); - - pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); - -@@ -180,18 +172,18 @@ - - static void ssb_core_disable(struct b44 *bp) - { -- if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) -+ if (br32(B44_SBTMSLOW) & SBTMSLOW_RESET) - return; - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); - b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); - b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | -+ bw32(B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | - SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -+ br32(B44_SBTMSLOW); - udelay(1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -+ br32(B44_SBTMSLOW); - udelay(1); - } - -@@ -200,58 +192,65 @@ - u32 val; - - ssb_core_disable(bp); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -+ br32(B44_SBTMSLOW); - udelay(1); - - /* Clear SERR if set, this is a hw bug workaround. */ -- if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) -- bw32(bp, B44_SBTMSHIGH, 0); -+ if (br32(B44_SBTMSHIGH) & SBTMSHIGH_SERR) -+ bw32(B44_SBTMSHIGH, 0); - -- val = br32(bp, B44_SBIMSTATE); -+ val = br32(B44_SBIMSTATE); - if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) -- bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); -+ bw32(B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -+ br32(B44_SBTMSLOW); - udelay(1); - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -+ br32(B44_SBTMSLOW); - udelay(1); - } - -+static int b44_4713_instance; -+ - static int ssb_core_unit(struct b44 *bp) - { --#if 0 -- u32 val = br32(bp, B44_SBADMATCH0); -- u32 base; -- -- type = val & SBADMATCH0_TYPE_MASK; -- switch (type) { -- case 0: -- base = val & SBADMATCH0_BS0_MASK; -- break; -- -- case 1: -- base = val & SBADMATCH0_BS1_MASK; -- break; -- -- case 2: -- default: -- base = val & SBADMATCH0_BS2_MASK; -- break; -- }; --#endif -- return 0; -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) -+ return b44_4713_instance++; -+ else -+ return 0; - } - - static int ssb_is_core_up(struct b44 *bp) - { -- return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) -+ return ((br32(B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) - == SBTMSLOW_CLOCK); - } - -+static void __b44_cam_read(struct b44 *bp, unsigned char *data, int index) ++ ++static void bcm47xx_machine_restart(char *command) +{ -+ u32 val; ++ printk("Please stand by while rebooting the system...\n"); ++ ++ /* Set the watchdog timer to reset immediately */ ++ local_irq_disable(); ++ sb_watchdog(sbh, 1); ++ while (1); ++} + -+ bw32(B44_CAM_CTRL, (CAM_CTRL_READ | -+ (index << CAM_CTRL_INDEX_SHIFT))); ++static void bcm47xx_machine_halt(void) ++{ ++ /* Disable interrupts and watchdog and spin forever */ ++ local_irq_disable(); ++ sb_watchdog(sbh, 0); ++ while (1); ++} + -+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); ++void __init plat_setup(void) ++{ ++ char *s; ++ int i; ++ ++ sbh = sb_kattach(); ++ sb_mips_init(sbh); + -+ val = br32(B44_CAM_DATA_LO); ++ bcm47xx_pci_init(); + -+ data[2] = (val >> 24) & 0xFF; -+ data[3] = (val >> 16) & 0xFF; -+ data[4] = (val >> 8) & 0xFF; -+ data[5] = (val >> 0) & 0xFF; ++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); + -+ val = br32(B44_CAM_DATA_HI); ++ sb_serial_init(sbh, serial_add); ++ boardflags = getintvar(NULL, "boardflags"); ++ ++ /* reverse serial ports if the nvram variable kernel_args starts with console=ttyS1 */ ++ s = nvram_get("kernel_args"); ++ if (!s) s = ""; ++ if (!strncmp(s, "console=ttyS1", 13)) { ++ for (i = num_ports; i; i--) ++ do_serial_add(&ports[i - 1]); ++ } else { ++ for (i = 0; i < num_ports; i++) ++ do_serial_add(&ports[i]); ++ } ++ ++ _machine_restart = bcm47xx_machine_restart; ++ _machine_halt = bcm47xx_machine_halt; ++ _machine_power_off = bcm47xx_machine_halt; + -+ data[0] = (val >> 8) & 0xFF; -+ data[1] = (val >> 0) & 0xFF; ++ board_time_init = bcm47xx_time_init; ++ board_timer_setup = bcm47xx_timer_setup; +} + - static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) - { - u32 val; -@@ -260,19 +259,19 @@ - val |= ((u32) data[3]) << 16; - val |= ((u32) data[4]) << 8; - val |= ((u32) data[5]) << 0; -- bw32(bp, B44_CAM_DATA_LO, val); -+ bw32(B44_CAM_DATA_LO, val); - val = (CAM_DATA_HI_VALID | - (((u32) data[0]) << 8) | - (((u32) data[1]) << 0)); -- bw32(bp, B44_CAM_DATA_HI, val); -- bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE | -+ bw32(B44_CAM_DATA_HI, val); -+ bw32(B44_CAM_CTRL, (CAM_CTRL_WRITE | - (index << CAM_CTRL_INDEX_SHIFT))); - b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); - } - - static inline void __b44_disable_ints(struct b44 *bp) - { -- bw32(bp, B44_IMASK, 0); -+ bw32(B44_IMASK, 0); - } - - static void b44_disable_ints(struct b44 *bp) -@@ -280,34 +279,40 @@ - __b44_disable_ints(bp); - - /* Flush posted writes. */ -- br32(bp, B44_IMASK); -+ br32(B44_IMASK); - } - - static void b44_enable_ints(struct b44 *bp) - { -- bw32(bp, B44_IMASK, bp->imask); -+ bw32(B44_IMASK, bp->imask); - } - - static int b44_readphy(struct b44 *bp, int reg, u32 *val) - { - int err; - -- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); -- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; ++EXPORT_SYMBOL(sbh); ++EXPORT_SYMBOL(boardflags); +diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c +--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/time.c 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+ bw32(B44_EMAC_ISTAT, EMAC_INT_MII); -+ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | - (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); - err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -- *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; -+ *val = br32(B44_MDIO_DATA) & MDIO_DATA_DATA; - - return err; - } - - static int b44_writephy(struct b44 *bp, int reg, u32 val) - { -- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); -- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ bw32(B44_EMAC_ISTAT, EMAC_INT_MII); -+ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | - (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | -@@ -344,6 +349,9 @@ - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; ++void __init ++bcm47xx_time_init(void) ++{ ++ unsigned int hz; + - err = b44_writephy(bp, MII_BMCR, BMCR_RESET); - if (err) - return err; -@@ -367,20 +375,20 @@ - bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE); - bp->flags |= pause_flags; - -- val = br32(bp, B44_RXCONFIG); -+ val = br32(B44_RXCONFIG); - if (pause_flags & B44_FLAG_RX_PAUSE) - val |= RXCONFIG_FLOW; - else - val &= ~RXCONFIG_FLOW; -- bw32(bp, B44_RXCONFIG, val); -+ bw32(B44_RXCONFIG, val); - -- val = br32(bp, B44_MAC_FLOW); -+ val = br32(B44_MAC_FLOW); - if (pause_flags & B44_FLAG_TX_PAUSE) - val |= (MAC_FLOW_PAUSE_ENAB | - (0xc0 & MAC_FLOW_RX_HI_WATER)); - else - val &= ~MAC_FLOW_PAUSE_ENAB; -- bw32(bp, B44_MAC_FLOW, val); -+ bw32(B44_MAC_FLOW, val); - } - - static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) -@@ -414,6 +422,9 @@ - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; ++ /* ++ * Use deterministic values for initial counter interrupt ++ * so that calibrate delay avoids encountering a counter wrap. ++ */ ++ write_c0_count(0); ++ write_c0_compare(0xffff); + - if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) - goto out; - if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, -@@ -476,11 +487,11 @@ - - val = &bp->hw_stats.tx_good_octets; - for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) { -- *val++ += br32(bp, reg); -+ *val++ += br32(reg); - } - val = &bp->hw_stats.rx_good_octets; - for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) { -- *val++ += br32(bp, reg); -+ *val++ += br32(reg); - } ++ hz = 200 * 1000 * 1000; ++ ++ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ ++ mips_hpt_frequency = hz / 2; ++ ++} ++ ++void __init ++bcm47xx_timer_setup(struct irqaction *irq) ++{ ++ /* Enable the timer interrupt */ ++ setup_irq(7, irq); ++} +diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c +--- linux.old/arch/mips/kernel/cpu-probe.c 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/kernel/cpu-probe.c 2005-12-15 12:57:27.901177250 +0100 +@@ -656,6 +656,28 @@ } -@@ -506,6 +517,19 @@ - { - u32 bmsr, aux; -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) { -+ bp->flags |= B44_FLAG_100_BASE_T; -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ if (!netif_carrier_ok(bp->dev)) { -+ u32 val = br32(B44_TX_CTRL); -+ val |= TX_CTRL_DUPLEX; -+ bw32(B44_TX_CTRL, val); -+ netif_carrier_on(bp->dev); -+ b44_link_report(bp); -+ } -+ return; ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_config1(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM3302: ++ c->cputype = CPU_BCM3302; ++ c->isa_level = MIPS_CPU_ISA_M32; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; ++ break; ++ case PRID_IMP_BCM4710: ++ c->cputype = CPU_BCM4710; ++ c->isa_level = MIPS_CPU_ISA_M32; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; + } ++} + - if (!b44_readphy(bp, MII_BMSR, &bmsr) && - !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && - (bmsr != 0xffff)) { -@@ -520,14 +544,14 @@ - - if (!netif_carrier_ok(bp->dev) && - (bmsr & BMSR_LSTATUS)) { -- u32 val = br32(bp, B44_TX_CTRL); -+ u32 val = br32(B44_TX_CTRL); - u32 local_adv, remote_adv; - - if (bp->flags & B44_FLAG_FULL_DUPLEX) - val |= TX_CTRL_DUPLEX; - else - val &= ~TX_CTRL_DUPLEX; -- bw32(bp, B44_TX_CTRL, val); -+ bw32(B44_TX_CTRL, val); - - if (!(bp->flags & B44_FLAG_FORCE_LINK) && - !b44_readphy(bp, MII_ADVERTISE, &local_adv) && -@@ -572,7 +596,7 @@ - { - u32 cur, cons; - -- cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK; -+ cur = br32(B44_DMATX_STAT) & DMATX_STAT_CDMASK; - cur /= sizeof(struct dma_desc); - - /* XXX needs updating when NETIF_F_SG is supported */ -@@ -596,7 +620,7 @@ - TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH) - netif_wake_queue(bp->dev); - -- bw32(bp, B44_GPTIMER, 0); -+ bw32(B44_GPTIMER, 0); - } - - /* Works like this. This chip writes a 'struct rx_header" 30 bytes -@@ -713,7 +737,7 @@ - u32 cons, prod; - - received = 0; -- prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK; -+ prod = br32(B44_DMARX_STAT) & DMARX_STAT_CDMASK; - prod /= sizeof(struct dma_desc); - cons = bp->rx_cons; - -@@ -792,7 +816,7 @@ - } - - bp->rx_cons = cons; -- bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc)); -+ bw32(B44_DMARX_PTR, cons * sizeof(struct dma_desc)); - - return received; - } -@@ -856,8 +880,8 @@ - - spin_lock_irqsave(&bp->lock, flags); - -- istat = br32(bp, B44_ISTAT); -- imask = br32(bp, B44_IMASK); -+ istat = br32(B44_ISTAT); -+ imask = br32(B44_IMASK); - - /* ??? What the fuck is the purpose of the interrupt mask - * ??? register if we have to mask it out by hand anyways? -@@ -877,8 +901,8 @@ - dev->name); - } - -- bw32(bp, B44_ISTAT, istat); -- br32(bp, B44_ISTAT); -+ bw32(B44_ISTAT, istat); -+ br32(B44_ISTAT); - } - spin_unlock_irqrestore(&bp->lock, flags); - return IRQ_RETVAL(handled); -@@ -965,11 +989,11 @@ - - wmb(); - -- bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); -+ bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc)); - if (bp->flags & B44_FLAG_BUGGY_TXPTR) -- bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); -+ bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc)); - if (bp->flags & B44_FLAG_REORDER_BUG) -- br32(bp, B44_DMATX_PTR); -+ br32(B44_DMATX_PTR); - - if (TX_BUFFS_AVAIL(bp) < 1) - netif_stop_queue(dev); -@@ -1137,32 +1161,35 @@ - { - unsigned long reg; - -- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); -+ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); - for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) -- br32(bp, reg); -+ br32(reg); - for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) -- br32(bp, reg); -+ br32(reg); - } - - /* bp->lock is held. */ - static void b44_chip_reset(struct b44 *bp) - { -+ unsigned int sb_clock; -+ - if (ssb_is_core_up(bp)) { -- bw32(bp, B44_RCV_LAZY, 0); -- bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); -+ bw32(B44_RCV_LAZY, 0); -+ bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE); - b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1); -- bw32(bp, B44_DMATX_CTRL, 0); -+ bw32(B44_DMATX_CTRL, 0); - bp->tx_prod = bp->tx_cons = 0; -- if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) { -+ if (br32(B44_DMARX_STAT) & DMARX_STAT_EMASK) { - b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, - 100, 0); - } -- bw32(bp, B44_DMARX_CTRL, 0); -+ bw32(B44_DMARX_CTRL, 0); - bp->rx_prod = bp->rx_cons = 0; - } else { -- ssb_pci_setup(bp, (bp->core_unit == 0 ? -- SBINTVEC_ENET0 : -- SBINTVEC_ENET1)); -+ if (bp->pdev->device != PCI_DEVICE_ID_BCM4713) -+ ssb_pci_setup(bp, (bp->core_unit == 0 ? -+ SBINTVEC_ENET0 : -+ SBINTVEC_ENET1)); - } - - ssb_core_reset(bp); -@@ -1170,20 +1197,26 @@ - b44_clear_stats(bp); - - /* Make PHY accessible. */ -- bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -- (0x0d & MDIO_CTRL_MAXF_MASK))); -- br32(bp, B44_MDIO_CTRL); -- -- if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { -- bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); -- br32(bp, B44_ENET_CTRL); -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) -+ sb_clock = 100000000; /* 100 MHz */ -+ else -+ sb_clock = 62500000; /* 62.5 MHz */ -+ -+ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO) -+ & MDIO_CTRL_MAXF_MASK))); -+ br32(B44_MDIO_CTRL); -+ -+ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) { -+ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL); -+ br32(B44_ENET_CTRL); - bp->flags &= ~B44_FLAG_INTERNAL_PHY; - } else { -- u32 val = br32(bp, B44_DEVCTRL); -+ u32 val = br32(B44_DEVCTRL); - - if (val & DEVCTRL_EPR) { -- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); -- br32(bp, B44_DEVCTRL); -+ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR)); -+ br32(B44_DEVCTRL); - udelay(100); - } - bp->flags |= B44_FLAG_INTERNAL_PHY; -@@ -1200,13 +1233,13 @@ - /* bp->lock is held. */ - static void __b44_set_mac_addr(struct b44 *bp) - { -- bw32(bp, B44_CAM_CTRL, 0); -+ bw32(B44_CAM_CTRL, 0); - if (!(bp->dev->flags & IFF_PROMISC)) { - u32 val; - - __b44_cam_write(bp, bp->dev->dev_addr, 0); -- val = br32(bp, B44_CAM_CTRL); -- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); -+ val = br32(B44_CAM_CTRL); -+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE); - } - } - -@@ -1240,30 +1273,30 @@ - b44_setup_phy(bp); - - /* Enable CRC32, set proper LED modes and power on PHY */ -- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); -- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); -+ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); -+ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); - - /* This sets the MAC address too. */ - __b44_set_rx_mode(bp->dev); - - /* MTU + eth header + possible VLAN tag + struct rx_header */ -- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -+ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -+ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); - -- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */ -- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); -- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); -- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | -+ bw32(B44_TX_WMARK, 56); /* XXX magic */ -+ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE); -+ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); -+ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | - (bp->rx_offset << DMARX_CTRL_ROSHIFT))); -- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); -+ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); - -- bw32(bp, B44_DMARX_PTR, bp->rx_pending); -+ bw32(B44_DMARX_PTR, bp->rx_pending); - bp->rx_prod = bp->rx_pending; - -- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); -+ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); - -- val = br32(bp, B44_ENET_CTRL); -- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); -+ val = br32(B44_ENET_CTRL); -+ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); - } - - static int b44_open(struct net_device *dev) -@@ -1416,11 +1449,11 @@ - int i=0; - unsigned char zero[6] = {0,0,0,0,0,0}; - -- val = br32(bp, B44_RXCONFIG); -+ val = br32(B44_RXCONFIG); - val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); - if (dev->flags & IFF_PROMISC) { - val |= RXCONFIG_PROMISC; -- bw32(bp, B44_RXCONFIG, val); -+ bw32(B44_RXCONFIG, val); - } else { - __b44_set_mac_addr(bp); - -@@ -1432,9 +1465,9 @@ - for(;i<64;i++) { - __b44_cam_write(bp, zero, i); - } -- bw32(bp, B44_RXCONFIG, val); -- val = br32(bp, B44_CAM_CTRL); -- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); -+ bw32(B44_RXCONFIG, val); -+ val = br32(B44_CAM_CTRL); -+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE); - } - } - -@@ -1704,19 +1737,41 @@ + __init void cpu_probe(void) { - u8 eeprom[128]; - int err; -+ unsigned long flags; + struct cpuinfo_mips *c = ¤t_cpu_data; +@@ -678,6 +700,9 @@ + case PRID_COMP_SIBYTE: + cpu_probe_sibyte(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_SANDCRAFT: + cpu_probe_sandcraft(c); + break; +diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S +--- linux.old/arch/mips/kernel/head.S 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/kernel/head.S 2005-12-15 12:57:27.901177250 +0100 +@@ -107,6 +107,14 @@ + #endif + .endm -- err = b44_read_eeprom(bp, &eeprom[0]); -- if (err) -- goto out; -- -- bp->dev->dev_addr[0] = eeprom[79]; -- bp->dev->dev_addr[1] = eeprom[78]; -- bp->dev->dev_addr[2] = eeprom[81]; -- bp->dev->dev_addr[3] = eeprom[80]; -- bp->dev->dev_addr[4] = eeprom[83]; -- bp->dev->dev_addr[5] = eeprom[82]; -- -- bp->phy_addr = eeprom[90] & 0x1f; -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) { -+ /* -+ * BCM47xx boards don't have a EEPROM. The MAC is stored in -+ * a NVRAM area somewhere in the flash memory. As we don't -+ * know the location and/or the format of the NVRAM area -+ * here, we simply rely on the bootloader to write the -+ * MAC into the CAM. -+ */ -+ spin_lock_irqsave(&bp->lock, flags); -+ __b44_cam_read(bp, bp->dev->dev_addr, 0); -+ spin_unlock_irqrestore(&bp->lock, flags); ++#ifdef CONFIG_BCM4710 ++#undef eret ++#define eret nop; nop; eret ++#endif + -+ /* -+ * BCM47xx boards don't have a PHY. Usually there is a switch -+ * chip with multiple PHYs connected to the PHY port. -+ */ -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+ bp->dma_offset = 0; -+ } else { -+ err = b44_read_eeprom(bp, &eeprom[0]); -+ if (err) -+ return err; -+ -+ bp->dev->dev_addr[0] = eeprom[79]; -+ bp->dev->dev_addr[1] = eeprom[78]; -+ bp->dev->dev_addr[2] = eeprom[81]; -+ bp->dev->dev_addr[3] = eeprom[80]; -+ bp->dev->dev_addr[4] = eeprom[83]; -+ bp->dev->dev_addr[5] = eeprom[82]; -+ -+ bp->phy_addr = eeprom[90] & 0x1f; -+ bp->dma_offset = SB_PCI_DMA; -+ } ++ j kernel_entry ++ nop ++ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. +diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c +--- linux.old/arch/mips/kernel/proc.c 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/kernel/proc.c 2005-12-15 12:57:27.921168500 +0100 +@@ -82,6 +82,8 @@ + [CPU_VR4181] = "NEC VR4181", + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000", ++ [CPU_BCM3302] = "Broadcom BCM3302", ++ [CPU_BCM4710] = "Broadcom BCM4710", + [CPU_PR4450] = "Philips PR4450", + }; - /* With this, plus the rx_header prepended to the data by the - * hardware, we'll land the ethernet header on a 2-byte boundary. -@@ -1726,13 +1781,12 @@ - bp->imask = IMASK_DEF; +diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c +--- linux.old/arch/mips/mm/tlbex.c 2005-12-15 13:26:49.794011750 +0100 ++++ linux.dev/arch/mips/mm/tlbex.c 2005-12-15 12:57:27.945158000 +0100 +@@ -858,6 +858,8 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM3302: ++ case CPU_BCM4710: + tlbw(p); + break; - bp->core_unit = ssb_core_unit(bp); -- bp->dma_offset = SB_PCI_DMA; +diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile +--- linux.old/arch/mips/pci/Makefile 2005-12-15 13:26:49.814003000 +0100 ++++ linux.dev/arch/mips/pci/Makefile 2005-12-15 14:27:26.439319250 +0100 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o ++obj-$(CONFIG_BCM947XX) += fixup-bcm47xx.o - /* XXX - really required? - bp->flags |= B44_FLAG_BUGGY_TXPTR; - */ --out: -- return err; + # + # These are still pretty much in the old state, watch, go blind. +diff -urN linux.old/arch/mips/pci/fixup-bcm47xx.c linux.dev/arch/mips/pci/fixup-bcm47xx.c +--- linux.old/arch/mips/pci/fixup-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/fixup-bcm47xx.c 2005-12-15 12:57:27.945158000 +0100 +@@ -0,0 +1,23 @@ ++#include ++#include + ++/* Do platform specific device initialization at pci_enable_device() time */ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ + return 0; - } - - static int __devinit b44_init_one(struct pci_dev *pdev, -@@ -1810,7 +1864,7 @@ - - spin_lock_init(&bp->lock); - -- bp->regs = ioremap(b44reg_base, b44reg_len); -+ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len); - if (bp->regs == 0UL) { - printk(KERN_ERR PFX "Cannot map device registers, " - "aborting.\n"); -@@ -1871,7 +1925,8 @@ - - pci_save_state(bp->pdev); - -- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); -+ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name, -+ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400"); - for (i = 0; i < 6; i++) - printk("%2.2x%c", dev->dev_addr[i], - i == 5 ? '\n' : ':'); -@@ -1879,7 +1934,7 @@ - return 0; - - err_out_iounmap: -- iounmap(bp->regs); -+ iounmap((void *) bp->regs); - - err_out_free_dev: - free_netdev(dev); -@@ -1901,7 +1956,7 @@ - struct b44 *bp = netdev_priv(dev); - - unregister_netdev(dev); -- iounmap(bp->regs); -+ iounmap((void *) bp->regs); - free_netdev(dev); - pci_release_regions(pdev); - pci_disable_device(pdev); -diff -Nur linux-2.6.12.5/drivers/net/b44.h linux-2.6.12.5-brcm/drivers/net/b44.h ---- linux-2.6.12.5/drivers/net/b44.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/net/b44.h 2005-08-28 11:12:20.694819024 +0200 -@@ -292,6 +292,9 @@ - #define SSB_PCI_MASK1 0xfc000000 - #define SSB_PCI_MASK2 0xc0000000 - -+#define br32(REG) readl(bp->regs + (REG)) -+#define bw32(REG,VAL) writel((VAL), bp->regs + (REG)) ++} + - /* 4400 PHY registers */ - #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ - #define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ -@@ -345,6 +348,8 @@ - }; - - #define B44_MCAST_TABLE_SIZE 32 -+#define B44_PHY_ADDR_NO_PHY 30 -+#define B44_MDC_RATIO 5000000 - - /* SW copy of device statistics, kept up to date by periodic timer - * which probes HW values. Must have same relative layout as HW -@@ -410,7 +415,7 @@ - struct net_device_stats stats; - struct b44_hw_stats hw_stats; - -- void __iomem *regs; -+ unsigned long regs; - struct pci_dev *pdev; - struct net_device *dev; ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u8 irq; ++ ++ if (dev->bus->number == 1) ++ return 2; ++ ++ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); ++ return irq + 2; ++} ++ ++struct pci_fixup pcibios_fixups[] = { ++ { 0 } ++}; +diff -urN linux.old/arch/mips/pci/pci.c linux.dev/arch/mips/pci/pci.c +--- linux.old/arch/mips/pci/pci.c 2005-12-15 13:26:49.814003000 +0100 ++++ linux.dev/arch/mips/pci/pci.c 2005-12-17 18:08:13.553162000 +0100 +@@ -307,7 +307,8 @@ + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) +- offset = hose->mem_offset; ++// offset = hose->mem_offset; ++ offset = 0x24000000; -diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h ---- linux-2.6.12.5/include/asm-mips/bootinfo.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h 2005-08-28 11:12:20.695818872 +0200 -@@ -213,6 +213,12 @@ + res->start = region->start + offset; + res->end = region->end + offset; +diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h +--- linux.old/include/asm-mips/bootinfo.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/asm-mips/bootinfo.h 2005-12-15 12:57:27.969147500 +0100 +@@ -218,6 +218,12 @@ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ @@ -14085,10 +11749,10 @@ diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include #define CL_SIZE COMMAND_LINE_SIZE const char *get_system_type(void); -diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm-mips/cpu.h ---- linux-2.6.12.5/include/asm-mips/cpu.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/asm-mips/cpu.h 2005-08-28 11:12:20.695818872 +0200 -@@ -87,6 +87,13 @@ +diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h +--- linux.old/include/asm-mips/cpu.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/asm-mips/cpu.h 2005-12-15 12:57:27.969147500 +0100 +@@ -102,6 +102,13 @@ #define PRID_IMP_SR71000 0x0400 /* @@ -14102,42 +11766,20 @@ diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm- * Definitions for 7:0 on legacy processors */ -@@ -177,7 +184,9 @@ - #define CPU_VR4133 56 - #define CPU_AU1550 57 - #define CPU_24K 58 --#define CPU_LAST 58 -+#define CPU_BCM3302 59 -+#define CPU_BCM4710 60 -+#define CPU_LAST 60 +@@ -196,7 +203,9 @@ + #define CPU_34K 60 + #define CPU_PR4450 61 + #define CPU_SB1A 62 +-#define CPU_LAST 62 ++#define CPU_BCM3302 63 ++#define CPU_BCM4710 64 ++#define CPU_LAST 64 /* * ISA Level encodings -diff -Nur linux-2.6.12.5/include/asm-mips/mipsregs.h linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h ---- linux-2.6.12.5/include/asm-mips/mipsregs.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h 2005-08-28 11:12:20.722814768 +0200 -@@ -790,10 +790,18 @@ - #define read_c0_config1() __read_32bit_c0_register($16, 1) - #define read_c0_config2() __read_32bit_c0_register($16, 2) - #define read_c0_config3() __read_32bit_c0_register($16, 3) -+#define read_c0_config4() __read_32bit_c0_register($16, 4) -+#define read_c0_config5() __read_32bit_c0_register($16, 5) -+#define read_c0_config6() __read_32bit_c0_register($16, 6) -+#define read_c0_config7() __read_32bit_c0_register($16, 7) - #define write_c0_config(val) __write_32bit_c0_register($16, 0, val) - #define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) - #define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) - #define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) -+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) -+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) -+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) -+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) - - /* - * The WatchLo register. There may be upto 8 of them. -diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/init.h ---- linux-2.6.12.5/include/linux/init.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/linux/init.h 2005-08-28 11:12:20.723814616 +0200 +diff -urN linux.old/include/linux/init.h linux.dev/include/linux/init.h +--- linux.old/include/linux/init.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/linux/init.h 2005-12-15 12:57:27.973145750 +0100 @@ -86,6 +86,8 @@ static initcall_t __initcall_##fn __attribute_used__ \ __attribute__((__section__(".initcall" level ".init"))) = fn @@ -14147,10 +11789,10 @@ diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/ #define core_initcall(fn) __define_initcall("1",fn) #define postcore_initcall(fn) __define_initcall("2",fn) #define arch_initcall(fn) __define_initcall("3",fn) -diff -Nur linux-2.6.12.5/include/linux/pci_ids.h linux-2.6.12.5-brcm/include/linux/pci_ids.h ---- linux-2.6.12.5/include/linux/pci_ids.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h 2005-08-28 11:12:20.726814160 +0200 -@@ -2110,6 +2110,7 @@ +diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h +--- linux.old/include/linux/pci_ids.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/linux/pci_ids.h 2005-12-15 12:57:27.977144000 +0100 +@@ -1835,6 +1835,7 @@ #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e #define PCI_DEVICE_ID_BCM4401 0x4401 #define PCI_DEVICE_ID_BCM4401B0 0x4402