X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/8c1fd3fc2df82ae8290be58900f7bd7a4aeb6d0e..d6aaedceeac935d362eecb78341bb44ed009556d:/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch diff --git a/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch b/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch index 2e9bca7a1..ade90a05a 100644 --- a/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch +++ b/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch @@ -1,7 +1,7 @@ -diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig ---- linux-2.6.12.5/arch/mips/Kconfig 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/Kconfig 2005-08-28 16:21:04.700803432 +0200 -@@ -40,6 +40,15 @@ +diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig +--- linux.old/arch/mips/Kconfig 2005-12-15 13:26:49.758027500 +0100 ++++ linux.dev/arch/mips/Kconfig 2005-12-15 12:57:27.889182500 +0100 +@@ -244,6 +244,17 @@ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and Olivetti M700-10 workstations. @@ -10,4869 +10,4229 @@ diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU -+ select CPU_LITTLE_ENDIAN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN + help + Support for BCM947xx based boards -+ - config ACER_PICA_61 - bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" - depends on MACH_JAZZ && EXPERIMENTAL -@@ -974,7 +983,7 @@ ++ + config LASAT + bool "Support for LASAT Networks platforms" + select DMA_NONCOHERENT +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/Makefile 2005-12-15 12:57:27.921168500 +0100 +@@ -689,6 +689,13 @@ + load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 - config CPU_LITTLE_ENDIAN - bool "Generate little endian code" -- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA -+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM47XX - default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 - help - Some MIPS machines can be configured for either little or big endian -diff -Nur linux-2.6.12.5/arch/mips/Kconfig.orig linux-2.6.12.5-brcm/arch/mips/Kconfig.orig ---- linux-2.6.12.5/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/Kconfig.orig 2005-08-15 02:20:18.000000000 +0200 -@@ -0,0 +1,1662 @@ -+config MIPS -+ bool -+ default y -+ # Horrible source of confusion. Die, die, die ... -+ select EMBEDDED -+ -+config MIPS64 -+ bool "64-bit kernel" -+ help -+ Select this option if you want to build a 64-bit kernel. You should -+ only select this option if you have hardware that actually has a -+ 64-bit processor and if your application will actually benefit from -+ 64-bit processing, otherwise say N. You must say Y for kernels for -+ SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N. + # ++# Broadcom BCM47XX boards ++# ++core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/ ++cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include ++load-$(CONFIG_BCM947XX) := 0xffffffff80001000 + -+config 64BIT -+ def_bool MIPS64 ++# + # SNI RM200 PCI + # + core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/ +diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile +--- linux.old/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/Makefile 2005-12-15 14:32:03.580639500 +0100 +@@ -0,0 +1,6 @@ ++# ++# Makefile for the BCM47xx specific kernel interface routines ++# under Linux. ++# + -+config MIPS32 -+ bool -+ depends on MIPS64 = 'n' -+ default y ++obj-y := irq.o int-handler.o prom.o setup.o time.o pci.o +diff -urN linux.old/arch/mips/bcm947xx/broadcom/Makefile linux.dev/arch/mips/bcm947xx/broadcom/Makefile +--- linux.old/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/Makefile 2005-12-15 16:59:40.571216500 +0100 +@@ -0,0 +1,6 @@ ++# ++# Makefile for the BCM47xx specific kernel interface routines ++# under Linux. ++# ++ ++obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o sflash.o nvram.o +diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c +--- linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-12-15 17:35:21.719238750 +0100 +@@ -0,0 +1,483 @@ ++/* ++ * Misc useful routines to access NIC SROM/OTP . ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+mainmenu "Linux/MIPS Kernel Configuration" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+source "init/Kconfig" ++#include /* for sprom content groking */ + -+menu "Machine selection" ++#define VARS_MAX 4096 /* should be reduced */ + -+config MACH_JAZZ -+ bool "Support for the Jazz family of machines" -+ select ARC -+ select ARC32 -+ select GENERIC_ISA_DMA -+ select I8259 -+ select ISA -+ help -+ This a family of machines based on the MIPS R4030 chipset which was -+ used by several vendors to build RISC/os and Windows NT workstations. -+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and -+ Olivetti M700-10 workstations. -+ -+config ACER_PICA_61 -+ bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" -+ depends on MACH_JAZZ && EXPERIMENTAL -+ select DMA_NONCOHERENT -+ help -+ This is a machine with a R4400 133/150 MHz CPU. To compile a Linux -+ kernel that runs on these, say Y here. For details about Linux on -+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at -+ . -+ -+config MIPS_MAGNUM_4000 -+ bool "Support for MIPS Magnum 4000" -+ depends on MACH_JAZZ -+ select DMA_NONCOHERENT -+ help -+ This is a machine with a R4000 100 MHz CPU. To compile a Linux -+ kernel that runs on these, say Y here. For details about Linux on -+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at -+ . -+ -+config OLIVETTI_M700 -+ bool "Support for Olivetti M700-10" -+ depends on MACH_JAZZ -+ select DMA_NONCOHERENT -+ help -+ This is a machine with a R4000 100 MHz CPU. To compile a Linux -+ kernel that runs on these, say Y here. For details about Linux on -+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at -+ . -+ -+config MACH_VR41XX -+ bool "Support for NEC VR41XX-based machines" -+ -+config NEC_CMBVR4133 -+ bool "Support for NEC CMB-VR4133" -+ depends on MACH_VR41XX -+ select CPU_VR41XX -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select HW_HAS_PCI -+ select PCI_VR41XX ++#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */ ++#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */ + -+config ROCKHOPPER -+ bool "Support for Rockhopper baseboard" -+ depends on NEC_CMBVR4133 -+ select I8259 -+ select HAVE_STD_PC_SERIAL_PORT ++static int initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count); ++static int sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc); + -+config CASIO_E55 -+ bool "Support for CASIO CASSIOPEIA E-10/15/55/65" -+ depends on MACH_VR41XX -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select ISA ++static int initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count); + -+config IBM_WORKPAD -+ bool "Support for IBM WorkPad z50" -+ depends on MACH_VR41XX -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select ISA ++/* ++ * Initialize local vars from the right source for this platform. ++ * Return 0 on success, nonzero on error. ++ */ ++int ++srom_var_init(void *sbh, uint bustype, void *curmap, osl_t *osh, char **vars, int *count) ++{ ++ ASSERT(bustype == BUSTYPE(bustype)); ++ if (vars == NULL || count == NULL) ++ return (0); + -+config TANBAC_TB0226 -+ bool "Support for TANBAC TB0226 (Mbase)" -+ depends on MACH_VR41XX -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ help -+ The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC. -+ Please refer to about Mbase. ++ switch (BUSTYPE(bustype)) { + -+config TANBAC_TB0229 -+ bool "Support for TANBAC TB0229 (VR4131DIMM)" -+ depends on MACH_VR41XX -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ help -+ The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC. -+ Please refer to about VR4131DIMM. ++ case PCI_BUS: ++ ASSERT(curmap); /* can not be NULL */ ++ return initvars_srom_pci(sbh, curmap, vars, count); + -+config VICTOR_MPC30X -+ bool "Support for Victor MP-C303/304" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ depends on MACH_VR41XX ++ default: ++ return 0; ++ } ++ return (-1); ++} + -+config ZAO_CAPCELLA -+ bool "Support for ZAO Networks Capcella" -+ depends on MACH_VR41XX -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU ++/* support only 16-bit word read from srom */ ++int ++srom_read(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) ++{ ++ void *srom; ++ uint off, nw; + -+config PCI_VR41XX -+ bool "Add PCI control unit support of NEC VR4100 series" -+ depends on MACH_VR41XX && PCI -+ -+config VRC4171 -+ tristate "Add NEC VRC4171 companion chip support" -+ depends on MACH_VR41XX && ISA -+ ---help--- -+ The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121. -+ -+config VRC4173 -+ tristate "Add NEC VRC4173 companion chip support" -+ depends on MACH_VR41XX && PCI_VR41XX -+ ---help--- -+ The NEC VRC4173 is a companion chip for NEC VR4122/VR4131. -+ -+config TOSHIBA_JMR3927 -+ bool "Support for Toshiba JMR-TX3927 board" -+ depends on MIPS32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select SWAP_IO_SPACE ++ ASSERT(bustype == BUSTYPE(bustype)); + -+config MIPS_COBALT -+ bool "Support for Cobalt Server (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select I8259 -+ select IRQ_CPU ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; + -+config MACH_DECSTATION -+ bool "Support for DECstations" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ depends on MIPS32 || EXPERIMENTAL -+ ---help--- -+ This enables support for DEC's MIPS based workstations. For details -+ see the Linux/MIPS FAQ on and the -+ DECstation porting pages on . ++ off = byteoff / 2; ++ nw = nbytes / 2; + -+ If you have one of the following DECstation Models you definitely -+ want to choose R4xx0 for the CPU Type: ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ if (!curmap) ++ return 1; ++ srom = (uchar*)curmap + PCI_BAR0_SPROM_OFFSET; ++ if (sprom_read_pci(srom, off, buf, nw, FALSE)) ++ return 1; ++ } else { ++ return 1; ++ } + -+ DECstation 5000/50 -+ DECstation 5000/150 -+ DECstation 5000/260 -+ DECsystem 5900/260 ++ return 0; ++} + -+ otherwise choose R3000. ++/* support only 16-bit word write into srom */ ++int ++srom_write(uint bustype, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf) ++{ ++ uint16 *srom; ++ uint i, off, nw, crc_range; ++ uint16 image[SPROM_SIZE], *p; ++ uint8 crc; ++ volatile uint32 val32; + -+config MIPS_EV64120 -+ bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select MIPS_GT64120 -+ help -+ This is an evaluation board based on the Galileo GT-64120 -+ single-chip system controller that contains a MIPS R5000 compatible -+ core running at 75/100MHz. Their website is located at -+ . Say Y here if you wish to build a -+ kernel for this platform. -+ -+config EVB_PCI1 -+ bool "Enable Second PCI (PCI1)" -+ depends on MIPS_EV64120 -+ -+config MIPS_EV96100 -+ bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select MIPS_GT96100 -+ select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE -+ help -+ This is an evaluation board based on the Galileo GT-96100 LAN/WAN -+ communications controllers containing a MIPS R5000 compatible core -+ running at 83MHz. Their website is . Say Y -+ here if you wish to build a kernel for this platform. ++ ASSERT(bustype == BUSTYPE(bustype)); + -+config MIPS_IVR -+ bool "Support for Globespan IVR board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ help -+ This is an evaluation board built by Globespan to showcase thir -+ iVR (Internet Video Recorder) design. It utilizes a QED RM5231 -+ R5000 MIPS core. More information can be found out their website -+ located at . Say Y here if you wish to -+ build a kernel for this platform. -+ -+config LASAT -+ bool "Support for LASAT Networks platforms" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select MIPS_GT64120 -+ select R5000_CPU_SCACHE ++ /* check input - 16-bit access only */ ++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) ++ return 1; + -+config PICVUE -+ tristate "PICVUE LCD display driver" -+ depends on LASAT ++ crc_range = (((BUSTYPE(bustype) == SDIO_BUS)) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; + -+config PICVUE_PROC -+ tristate "PICVUE LCD display driver /proc interface" -+ depends on PICVUE ++ /* if changes made inside crc cover range */ ++ if (byteoff < crc_range) { ++ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; ++ /* read data including entire first 64 words from srom */ ++ if (srom_read(bustype, curmap, osh, 0, nw * 2, image)) ++ return 1; ++ /* make changes */ ++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); ++ /* calculate crc */ ++ htol16_buf(image, crc_range); ++ crc = ~hndcrc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); ++ ltoh16_buf(image, crc_range); ++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); ++ p = image; ++ off = 0; ++ } else { ++ p = buf; ++ off = byteoff / 2; ++ nw = nbytes / 2; ++ } + -+config DS1603 -+ bool "DS1603 RTC driver" -+ depends on LASAT ++ if (BUSTYPE(bustype) == PCI_BUS) { ++ srom = (uint16*)((uchar*)curmap + PCI_BAR0_SPROM_OFFSET); ++ /* enable writes to the SPROM */ ++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); ++ val32 |= SPROM_WRITEEN; ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ /* write srom */ ++ for (i = 0; i < nw; i++) { ++ W_REG(&srom[off + i], p[i]); ++ bcm_mdelay(WRITE_WORD_DELAY); ++ } ++ /* disable writes to the SPROM */ ++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); ++ } else { ++ return 1; ++ } + -+config LASAT_SYSCTL -+ bool "LASAT sysctl interface" -+ depends on LASAT ++ bcm_mdelay(WRITE_ENABLE_DELAY); ++ return 0; ++} + -+config MIPS_ITE8172 -+ bool "Support for ITE 8172G board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ help -+ Ths is an evaluation board made by ITE -+ with ATX form factor that utilizes a MIPS R5000 to work with its -+ ITE8172G companion internet appliance chip. The MIPS core can be -+ either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build -+ a kernel for this platform. -+ -+config IT8172_REVC -+ bool "Support for older IT8172 (Rev C)" -+ depends on MIPS_ITE8172 -+ help -+ Say Y here to support the older, Revision C version of the Integrated -+ Technology Express, Inc. ITE8172 SBC. Vendor page at -+ ; picture of the -+ board at . -+ -+config MIPS_ATLAS -+ bool "Support for MIPS Atlas board" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select MIPS_GT64120 -+ select SWAP_IO_SPACE -+ help -+ This enables support for the QED R5231-based MIPS Atlas evaluation -+ board. + -+config MIPS_MALTA -+ bool "Support for MIPS Malta board" -+ select BOOT_ELF32 -+ select HAVE_STD_PC_SERIAL_PORT -+ select DMA_NONCOHERENT -+ select GENERIC_ISA_DMA -+ select HW_HAS_PCI -+ select I8259 -+ select MIPS_GT64120 -+ select SWAP_IO_SPACE -+ help -+ This enables support for the VR5000-based MIPS Malta evaluation -+ board. ++/* ++ * Read in and validate sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++sprom_read_pci(uint16 *sprom, uint wordoff, uint16 *buf, uint nwords, bool check_crc) ++{ ++ int err = 0; ++ uint i; + -+config MIPS_SEAD -+ bool "Support for MIPS SEAD board (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select IRQ_CPU -+ select DMA_NONCOHERENT ++ /* read the sprom */ ++ for (i = 0; i < nwords; i++) ++ buf[i] = R_REG(&sprom[wordoff + i]); + -+config MOMENCO_OCELOT -+ bool "Support for Momentum Ocelot board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_CPU_RM7K -+ select MIPS_GT64120 -+ select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE -+ help -+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by -+ Momentum Computer . ++ if (check_crc) { ++ /* fixup the endianness so crc8 will pass */ ++ htol16_buf(buf, nwords * 2); ++ if (hndcrc8((uint8*)buf, nwords * 2, CRC8_INIT_VALUE) != CRC8_GOOD_VALUE) ++ err = 1; ++ /* now correct the endianness of the byte array */ ++ ltoh16_buf(buf, nwords * 2); ++ } ++ ++ return err; ++} + -+config MOMENCO_OCELOT_G -+ bool "Support for Momentum Ocelot-G board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_CPU_RM7K -+ select PCI_MARVELL -+ select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE -+ help -+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by -+ Momentum Computer . ++/* ++* Create variable table from memory. ++* Return 0 on success, nonzero on error. ++*/ ++static int ++initvars_table(osl_t *osh, char *start, char *end, char **vars, uint *count) ++{ ++ int c = (int)(end - start); + -+config MOMENCO_OCELOT_C -+ bool "Support for Momentum Ocelot-C board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_MV64340 -+ select PCI_MARVELL -+ select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE -+ help -+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by -+ Momentum Computer . ++ /* do it only when there is more than just the null string */ ++ if (c > 1) { ++ char *vp = MALLOC(osh, c); ++ ASSERT(vp); ++ if (!vp) ++ return BCME_NOMEM; ++ bcopy(start, vp, c); ++ *vars = vp; ++ *count = c; ++ } ++ else { ++ *vars = NULL; ++ *count = 0; ++ } ++ ++ return 0; ++} + -+config MOMENCO_OCELOT_3 -+ bool "Support for Momentum Ocelot-3 board" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_CPU_RM7K -+ select IRQ_MV64340 -+ select PCI_MARVELL -+ select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE -+ help -+ The Ocelot-3 is based off Discovery III System Controller and -+ PMC-Sierra Rm79000 core. ++/* ++ * Initialize nonvolatile variable table from sprom. ++ * Return 0 on success, nonzero on error. ++ */ ++static int ++initvars_srom_pci(void *sbh, void *curmap, char **vars, int *count) ++{ ++ uint16 w, b[64]; ++ uint8 sromrev; ++ struct ether_addr ea; ++ char eabuf[32]; ++ uint32 w32; ++ int woff, i; ++ char *vp, *base; ++ osl_t *osh = sb_osh(sbh); ++ char name[SB_DEVPATH_BUFSZ+16], *value; ++ char devpath[SB_DEVPATH_BUFSZ]; ++ int err; + -+config MOMENCO_JAGUAR_ATX -+ bool "Support for Momentum Jaguar board" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_CPU_RM7K -+ select IRQ_MV64340 -+ select LIMITED_DMA -+ select PCI_MARVELL -+ select RM7000_CPU_SCACHE -+ select SWAP_IO_SPACE -+ help -+ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by -+ Momentum Computer . ++ /* ++ * Apply CRC over SROM content regardless SROM is present or not, ++ * and use variable sromrev's existance in flash to decide ++ * if we should return an error when CRC fails or read SROM variables ++ * from flash. ++ */ ++ sprom_read_pci((void*)((int8*)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof(b)/sizeof(b[0]), TRUE); + -+config JAGUAR_DMALOW -+ bool "Low DMA Mode" -+ depends on MOMENCO_JAGUAR_ATX -+ help -+ Select to Y if jump JP5 is set on your board, N otherwise. Normally -+ the jumper is set, so if you feel unsafe, just say Y. ++ /* top word of sprom contains version and crc8 */ ++ sromrev = b[63] & 0xff; ++ /* bcm4401 sroms misprogrammed */ ++ if (sromrev == 0x10) ++ sromrev = 1; ++ ++ /* srom version check */ ++ if (sromrev > 3) ++ return (-2); + -+config PMC_YOSEMITE -+ bool "Support for PMC-Sierra Yosemite eval board" -+ select DMA_COHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_CPU_RM7K -+ select IRQ_CPU_RM9K -+ select SWAP_IO_SPACE -+ help -+ Yosemite is an evaluation board for the RM9000x2 processor -+ manufactured by PMC-Sierra ++ ASSERT(vars); ++ ASSERT(count); + -+config HYPERTRANSPORT -+ bool "Hypertransport Support for PMC-Sierra Yosemite" -+ depends on PMC_YOSEMITE ++ base = vp = MALLOC(osh, VARS_MAX); ++ ASSERT(vp); ++ if (!vp) ++ return -2; + -+config DDB5074 -+ bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT -+ select HAVE_STD_PC_SERIAL_PORT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select I8259 -+ select ISA -+ help -+ This enables support for the VR5000-based NEC DDB Vrc-5074 -+ evaluation board. ++ vp += sprintf(vp, "sromrev=%d", sromrev); ++ vp++; + -+config DDB5476 -+ bool "Support for NEC DDB Vrc-5476" -+ select DMA_NONCOHERENT -+ select HAVE_STD_PC_SERIAL_PORT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select I8259 -+ select ISA -+ help -+ This enables support for the R5432-based NEC DDB Vrc-5476 -+ evaluation board. ++ if (sromrev >= 3) { ++ /* New section takes over the 3th hardware function space */ + -+ Features : kernel debugging, serial terminal, NFS root fs, on-board -+ ether port USB, AC97, PCI, PCI VGA card & framebuffer console, -+ IDE controller, PS2 keyboard, PS2 mouse, etc. ++ /* Words 22+23 are 11a (mid) ofdm power offsets */ ++ w32 = ((uint32)b[23] << 16) | b[22]; ++ vp += sprintf(vp, "ofdmapo=%d", w32); ++ vp++; + -+config DDB5477 -+ bool "Support for NEC DDB Vrc-5477" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select I8259 -+ select IRQ_CPU -+ help -+ This enables support for the R5432-based NEC DDB Vrc-5477, -+ or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. -+ -+ Features : kernel debugging, serial terminal, NFS root fs, on-board -+ ether port USB, AC97, PCI, etc. -+ -+config DDB5477_BUS_FREQUENCY -+ int "bus frequency (in kHZ, 0 for auto-detect)" -+ depends on DDB5477 -+ default 0 ++ /* Words 24+25 are 11a (low) ofdm power offsets */ ++ w32 = ((uint32)b[25] << 16) | b[24]; ++ vp += sprintf(vp, "ofdmalpo=%d", w32); ++ vp++; + -+config NEC_OSPREY -+ bool "Support for NEC Osprey board" -+ select DMA_NONCOHERENT -+ select IRQ_CPU ++ /* Words 26+27 are 11a (high) ofdm power offsets */ ++ w32 = ((uint32)b[27] << 16) | b[26]; ++ vp += sprintf(vp, "ofdmahpo=%d", w32); ++ vp++; + -+config SGI_IP22 -+ bool "Support for SGI IP22 (Indy/Indigo2)" -+ select ARC -+ select ARC32 -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select IP22_CPU_SCACHE -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ help -+ This are the SGI Indy, Challenge S and Indigo2, as well as certain -+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel -+ that runs on these, say Y here. -+ -+config SGI_IP27 -+ bool "Support for SGI IP27 (Origin200/2000)" -+ depends on MIPS64 -+ select ARC -+ select ARC64 -+ select DMA_IP27 -+ select HW_HAS_PCI -+ select PCI_DOMAINS -+ help -+ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics -+ workstations. To compile a Linux kernel that runs on these, say Y -+ here. -+ -+#config SGI_SN0_XXL -+# bool "IP27 XXL" -+# depends on SGI_IP27 -+# This options adds support for userspace processes upto 16TB size. -+# Normally the limit is just .5TB. -+ -+config SGI_SN0_N_MODE -+ bool "IP27 N-Mode" -+ depends on SGI_IP27 -+ help -+ The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be -+ configured in either N-Modes which allows for more nodes or M-Mode -+ which allows for more memory. Your system is most probably -+ running in M-Mode, so you should say N here. -+ -+config DISCONTIGMEM -+ bool -+ default y if SGI_IP27 -+ help -+ Say Y to upport efficient handling of discontiguous physical memory, -+ for architectures which are either NUMA (Non-Uniform Memory Access) -+ or have huge holes in the physical address space for other reasons. -+ See for more. -+ -+config NUMA -+ bool "NUMA Support" -+ depends on SGI_IP27 -+ help -+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory -+ Access). This option is for configuring high-end multiprocessor -+ server machines. If in doubt, say N. ++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ ++ w32 = ((uint32)b[43] << 24) | ((uint32)b[42] << 8); ++ vp += sprintf(vp, "gpiotimerval=%d", w32); + -+config MAPPED_KERNEL -+ bool "Mapped kernel support" -+ depends on SGI_IP27 -+ help -+ Change the way a Linux kernel is loaded into memory on a MIPS64 -+ machine. This is required in order to support text replication and -+ NUMA. If you need to understand it, read the source code. ++ /*GPIO LED Powersave duty cycle (oncount >> 24) (offcount >> 8)*/ ++ w32 = ((uint32)((unsigned char)(b[21] >> 8) & 0xFF) << 24) | /* oncount*/ ++ ((uint32)((unsigned char)(b[21] & 0xFF)) << 8); /* offcount */ ++ vp += sprintf(vp, "gpiotimerval=%d", w32); + -+config REPLICATE_KTEXT -+ bool "Kernel text replication support" -+ depends on SGI_IP27 -+ help -+ Say Y here to enable replicating the kernel text across multiple -+ nodes in a NUMA cluster. This trades memory for speed. ++ vp++; ++ } + -+config REPLICATE_EXHANDLERS -+ bool "Exception handler replication support" -+ depends on SGI_IP27 -+ help -+ Say Y here to enable replicating the kernel exception handlers -+ across multiple nodes in a NUMA cluster. This trades memory for -+ speed. -+ -+config SGI_IP32 -+ bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" -+ depends on MIPS64 && EXPERIMENTAL -+ select ARC -+ select ARC32 -+ select BOOT_ELF32 -+ select OWN_DMA -+ select DMA_IP32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select R5000_CPU_SCACHE -+ select RM7000_CPU_SCACHE -+ help -+ If you want this kernel to run on SGI O2 workstation, say Y here. ++ if (sromrev >= 2) { ++ /* New section takes over the 4th hardware function space */ + -+config SOC_AU1X00 -+ depends on MIPS32 -+ bool "Support for AMD/Alchemy Au1X00 SOCs" ++ /* Word 29 is max power 11a high/low */ ++ w = b[29]; ++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); ++ vp++; + -+choice -+ prompt "Au1X00 SOC Type" -+ depends on SOC_AU1X00 -+ help -+ Say Y here to enable support for one of three AMD/Alchemy -+ SOCs. For additional documentation see www.amd.com. -+ -+config SOC_AU1000 -+ bool "SOC_AU1000" -+config SOC_AU1100 -+ bool "SOC_AU1100" -+config SOC_AU1500 -+ bool "SOC_AU1500" -+config SOC_AU1550 -+ bool "SOC_AU1550" -+ -+endchoice -+ -+choice -+ prompt "AMD/Alchemy Au1x00 board support" -+ depends on SOC_AU1X00 -+ help -+ These are evaluation boards built by AMD/Alchemy to -+ showcase their Au1X00 Internet Edge Processors. The SOC design -+ is based on the MIPS32 architecture running at 266/400/500MHz -+ with many integrated peripherals. Further information can be -+ found at their website, . Say Y here if you -+ wish to build a kernel for this platform. -+ -+config MIPS_PB1000 -+ bool "PB1000 board" -+ depends on SOC_AU1000 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select SWAP_IO_SPACE ++ /* Words 30-32 set the 11alow pa settings, ++ * 33-35 are the 11ahigh ones. ++ */ ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); ++ vp++; ++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); ++ vp++; ++ } ++ w = b[59]; ++ if (w == 0) ++ vp += sprintf(vp, "ccode="); ++ else ++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); ++ vp++; + -+config MIPS_PB1100 -+ bool "PB1100 board" -+ depends on SOC_AU1100 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select SWAP_IO_SPACE ++ } + -+config MIPS_PB1500 -+ bool "PB1500 board" -+ depends on SOC_AU1500 -+ select DMA_COHERENT -+ select HW_HAS_PCI ++ /* parameter section of sprom starts at byte offset 72 */ ++ woff = 72/2; + -+config MIPS_PB1550 -+ bool "PB1550 board" -+ depends on SOC_AU1550 -+ select DMA_COHERENT -+ select HW_HAS_PCI -+ select MIPS_DISABLE_OBSOLETE_IDE ++ /* first 6 bytes are il0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "il0macaddr=%s", eabuf); ++ vp++; + -+config MIPS_DB1000 -+ bool "DB1000 board" -+ depends on SOC_AU1000 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI ++ /* next 6 bytes are et0macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "et0macaddr=%s", eabuf); ++ vp++; + -+config MIPS_DB1100 -+ bool "DB1100 board" -+ depends on SOC_AU1100 -+ select DMA_NONCOHERENT ++ /* next 6 bytes are et1macaddr */ ++ ea.octet[0] = (b[woff] >> 8) & 0xff; ++ ea.octet[1] = b[woff] & 0xff; ++ ea.octet[2] = (b[woff+1] >> 8) & 0xff; ++ ea.octet[3] = b[woff+1] & 0xff; ++ ea.octet[4] = (b[woff+2] >> 8) & 0xff; ++ ea.octet[5] = b[woff+2] & 0xff; ++ woff += ETHER_ADDR_LEN/2 ; ++ bcm_ether_ntoa((uchar*)&ea, eabuf); ++ vp += sprintf(vp, "et1macaddr=%s", eabuf); ++ vp++; + -+config MIPS_DB1500 -+ bool "DB1500 board" -+ depends on SOC_AU1500 -+ select DMA_COHERENT -+ select HW_HAS_PCI -+ select MIPS_DISABLE_OBSOLETE_IDE ++ /* ++ * Enet phy settings one or two singles or a dual ++ * Bits 4-0 : MII address for enet0 (0x1f for not there) ++ * Bits 9-5 : MII address for enet1 (0x1f for not there) ++ * Bit 14 : Mdio for enet0 ++ * Bit 15 : Mdio for enet1 ++ */ ++ w = b[woff]; ++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); ++ vp++; ++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); ++ vp++; ++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); ++ vp++; + -+config MIPS_DB1550 -+ bool "DB1550 board" -+ depends on SOC_AU1550 -+ select HW_HAS_PCI -+ select DMA_COHERENT -+ select MIPS_DISABLE_OBSOLETE_IDE ++ /* Word 46 has board rev, antennas 0/1 & Country code/control */ ++ w = b[46]; ++ vp += sprintf(vp, "boardrev=%d", w & 0xff); ++ vp++; + -+config MIPS_BOSPORUS -+ bool "Bosporus board" -+ depends on SOC_AU1500 -+ select DMA_NONCOHERENT ++ if (sromrev > 1) ++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); ++ else ++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); ++ vp++; + -+config MIPS_MIRAGE -+ bool "Mirage board" -+ depends on SOC_AU1500 -+ select DMA_NONCOHERENT ++ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); ++ vp++; + -+config MIPS_XXS1500 -+ bool "MyCable XXS1500 board" -+ depends on SOC_AU1500 -+ select DMA_NONCOHERENT ++ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); ++ vp++; + -+config MIPS_MTX1 -+ bool "4G Systems MTX-1 board" -+ depends on SOC_AU1500 -+ select HW_HAS_PCI -+ select DMA_NONCOHERENT ++ /* Words 47-49 set the (wl) pa settings */ ++ woff = 47; + -+endchoice ++ for (i = 0; i < 3; i++) { ++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); ++ vp++; ++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); ++ vp++; ++ } + -+config SIBYTE_SB1xxx_SOC -+ bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select SWAP_IO_SPACE ++ /* ++ * Words 50-51 set the customer-configured wl led behavior. ++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; ++ * LED behavior values defined in wlioctl.h . ++ */ ++ w = b[50]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* gpio0 */ ++ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); ++ vp++; + -+choice -+ prompt "BCM1xxx SOC-based board" -+ depends on SIBYTE_SB1xxx_SOC -+ default SIBYTE_SWARM -+ help -+ Enable support for boards based on the SiByte line of SOCs -+ from Broadcom. There are configurations for the known -+ evaluation boards, or you can choose "Other" and add your -+ own board support code. ++ /* gpio1 */ ++ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ w = b[51]; ++ if ((w != 0) && (w != 0xffff)) { ++ /* gpio2 */ ++ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); ++ vp++; + -+config SIBYTE_SWARM -+ bool "BCM91250A-SWARM" -+ select SIBYTE_SB1250 ++ /* gpio3 */ ++ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); ++ vp++; ++ } ++ ++ /* Word 52 is max power 0/1 */ ++ w = b[52]; ++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); ++ vp++; + -+config SIBYTE_SENTOSA -+ bool "BCM91250E-Sentosa" -+ select SIBYTE_SB1250 ++ /* Word 56 is idle tssi target 0/1 */ ++ w = b[56]; ++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); ++ vp++; ++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); ++ vp++; + -+config SIBYTE_RHONE -+ bool "BCM91125E-Rhone" -+ select SIBYTE_BCM1125H ++ /* Word 57 is boardflags, if not programmed make it zero */ ++ w32 = (uint32)b[57]; ++ if (w32 == 0xffff) w32 = 0; ++ if (sromrev > 1) { ++ /* Word 28 is the high bits of boardflags */ ++ w32 |= (uint32)b[28] << 16; ++ } ++ vp += sprintf(vp, "boardflags=%d", w32); ++ vp++; + -+config SIBYTE_CARMEL -+ bool "BCM91120x-Carmel" -+ select SIBYTE_BCM1120 ++ /* Word 58 is antenna gain 0/1 */ ++ w = b[58]; ++ vp += sprintf(vp, "ag0=%d", w & 0xff); ++ vp++; + -+config SIBYTE_PTSWARM -+ bool "BCM91250PT-PTSWARM" -+ select SIBYTE_SB1250 ++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); ++ vp++; + -+config SIBYTE_LITTLESUR -+ bool "BCM91250C2-LittleSur" -+ select SIBYTE_SB1250 ++ if (sromrev == 1) { ++ /* set the oem string */ ++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", ++ ((b[59] >> 8) & 0xff), (b[59] & 0xff), ++ ((b[60] >> 8) & 0xff), (b[60] & 0xff), ++ ((b[61] >> 8) & 0xff), (b[61] & 0xff), ++ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); ++ vp++; ++ } else if (sromrev == 2) { ++ /* Word 60 OFDM tx power offset from CCK level */ ++ /* OFDM Power Offset - opo */ ++ vp += sprintf(vp, "opo=%d", b[60] & 0xff); ++ vp++; ++ } else { ++ /* Word 60: cck power offsets */ ++ vp += sprintf(vp, "cckpo=%d", b[60]); ++ vp++; + -+config SIBYTE_CRHINE -+ bool "BCM91120C-CRhine" -+ select SIBYTE_BCM1120 ++ /* Words 61+62: 11g ofdm power offsets */ ++ w32 = ((uint32)b[62] << 16) | b[61]; ++ vp += sprintf(vp, "ofdmgpo=%d", w32); ++ vp++; ++ } + -+config SIBYTE_CRHONE -+ bool "BCM91125C-CRhone" -+ select SIBYTE_BCM1125 ++ /* final nullbyte terminator */ ++ *vp++ = '\0'; + -+config SIBYTE_UNKNOWN -+ bool "Other" ++ ASSERT((vp - base) <= VARS_MAX); ++ ++ err = initvars_table(osh, base, vp, vars, count); ++ ++ MFREE(osh, base, VARS_MAX); ++ return err; ++} + -+endchoice +diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c +--- linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-12-15 20:14:31.420035750 +0100 +@@ -0,0 +1,358 @@ ++/* ++ * Misc useful OS-independent routines. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+config SIBYTE_BOARD -+ bool -+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN -+ default y ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+choice -+ prompt "BCM1xxx SOC Type" -+ depends on SIBYTE_UNKNOWN -+ default SIBYTE_UNK_BCM1250 -+ help -+ Since you haven't chosen a known evaluation board from -+ Broadcom, you must explicitly pick the SOC this kernel is -+ targetted for. ++unsigned char bcm_ctype[] = { ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ ++ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ ++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ ++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ ++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ ++ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ ++ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ ++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ ++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ ++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ ++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ ++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ ++}; + -+config SIBYTE_UNK_BCM1250 -+ bool "BCM1250" -+ select SIBYTE_SB1250 ++uchar ++bcm_toupper(uchar c) ++{ ++ if (bcm_islower(c)) ++ c -= 'a'-'A'; ++ return (c); ++} + -+config SIBYTE_UNK_BCM1120 -+ bool "BCM1120" -+ select SIBYTE_BCM1120 ++ulong ++bcm_strtoul(char *cp, char **endp, uint base) ++{ ++ ulong result, value; ++ bool minus; ++ ++ minus = FALSE; + -+config SIBYTE_UNK_BCM1125 -+ bool "BCM1125" -+ select SIBYTE_BCM1125 -+ -+config SIBYTE_UNK_BCM1125H -+ bool "BCM1125H" -+ select SIBYTE_BCM1125H ++ while (bcm_isspace(*cp)) ++ cp++; ++ ++ if (cp[0] == '+') ++ cp++; ++ else if (cp[0] == '-') { ++ minus = TRUE; ++ cp++; ++ } ++ ++ if (base == 0) { ++ if (cp[0] == '0') { ++ if ((cp[1] == 'x') || (cp[1] == 'X')) { ++ base = 16; ++ cp = &cp[2]; ++ } else { ++ base = 8; ++ cp = &cp[1]; ++ } ++ } else ++ base = 10; ++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { ++ cp = &cp[2]; ++ } ++ ++ result = 0; + -+endchoice ++ while (bcm_isxdigit(*cp) && ++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { ++ result = result*base + value; ++ cp++; ++ } + -+config SIBYTE_SB1250 -+ bool -+ select HW_HAS_PCI ++ if (minus) ++ result = (ulong)(result * -1); + -+config SIBYTE_BCM1120 -+ bool -+ select SIBYTE_BCM112X ++ if (endp) ++ *endp = (char *)cp; + -+config SIBYTE_BCM1125 -+ bool -+ select HW_HAS_PCI -+ select SIBYTE_BCM112X ++ return (result); ++} + -+config SIBYTE_BCM1125H -+ bool -+ select HW_HAS_PCI -+ select SIBYTE_BCM112X ++uint ++bcm_atoi(char *s) ++{ ++ uint n; + -+config SIBYTE_BCM112X -+ bool ++ n = 0; + -+choice -+ prompt "SiByte SOC Stepping" -+ depends on SIBYTE_SB1xxx_SOC ++ while (bcm_isdigit(*s)) ++ n = (n * 10) + *s++ - '0'; ++ return (n); ++} + -+config CPU_SB1_PASS_1 -+ bool "1250 Pass1" -+ depends on SIBYTE_SB1250 -+ select CPU_HAS_PREFETCH ++/* return pointer to location of substring 'needle' in 'haystack' */ ++char* ++bcmstrstr(char *haystack, char *needle) ++{ ++ int len, nlen; ++ int i; + -+config CPU_SB1_PASS_2_1250 -+ bool "1250 An" -+ depends on SIBYTE_SB1250 -+ select CPU_SB1_PASS_2 -+ help -+ Also called BCM1250 Pass 2 ++ if ((haystack == NULL) || (needle == NULL)) ++ return (haystack); + -+config CPU_SB1_PASS_2_2 -+ bool "1250 Bn" -+ depends on SIBYTE_SB1250 -+ select CPU_HAS_PREFETCH -+ help -+ Also called BCM1250 Pass 2.2 ++ nlen = strlen(needle); ++ len = strlen(haystack) - nlen + 1; + -+config CPU_SB1_PASS_4 -+ bool "1250 Cn" -+ depends on SIBYTE_SB1250 -+ select CPU_HAS_PREFETCH -+ help -+ Also called BCM1250 Pass 3 ++ for (i = 0; i < len; i++) ++ if (bcmp(needle, &haystack[i], nlen) == 0) ++ return (&haystack[i]); ++ return (NULL); ++} + -+config CPU_SB1_PASS_2_112x -+ bool "112x Hybrid" -+ depends on SIBYTE_BCM112X -+ select CPU_SB1_PASS_2 ++char* ++bcmstrcat(char *dest, const char *src) ++{ ++ strcpy(&dest[strlen(dest)], src); ++ return (dest); ++} + -+config CPU_SB1_PASS_3 -+ bool "112x An" -+ depends on SIBYTE_BCM112X -+ select CPU_HAS_PREFETCH + -+endchoice ++char* ++bcm_ether_ntoa(char *ea, char *buf) ++{ ++ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", ++ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, ++ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); ++ return (buf); ++} + -+config CPU_SB1_PASS_2 -+ bool ++/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ ++int ++bcm_ether_atoe(char *p, char *ea) ++{ ++ int i = 0; + -+config SIBYTE_HAS_LDT -+ bool -+ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H) -+ default y ++ for (;;) { ++ ea[i++] = (char) bcm_strtoul(p, &p, 16); ++ if (!*p++ || i == 6) ++ break; ++ } + -+config SIMULATION -+ bool "Running under simulation" -+ depends on SIBYTE_SB1xxx_SOC -+ help -+ Build a kernel suitable for running under the GDB simulator. -+ Primarily adjusts the kernel's notion of time. ++ return (i == 6); ++} + -+config SIBYTE_CFE -+ bool "Booting from CFE" -+ depends on SIBYTE_SB1xxx_SOC -+ help -+ Make use of the CFE API for enumerating available memory, -+ controlling secondary CPUs, and possibly console output. ++void ++bcm_mdelay(uint ms) ++{ ++ uint i; + -+config SIBYTE_CFE_CONSOLE -+ bool "Use firmware console" -+ depends on SIBYTE_CFE -+ help -+ Use the CFE API's console write routines during boot. Other console -+ options (VT console, sb1250 duart console, etc.) should not be -+ configured. -+ -+config SIBYTE_STANDALONE -+ bool -+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE -+ default y -+ -+config SIBYTE_STANDALONE_RAM_SIZE -+ int "Memory size (in megabytes)" -+ depends on SIBYTE_STANDALONE -+ default "32" -+ -+config SIBYTE_BUS_WATCHER -+ bool "Support for Bus Watcher statistics" -+ depends on SIBYTE_SB1xxx_SOC -+ help -+ Handle and keep statistics on the bus error interrupts (COR_ECC, -+ BAD_ECC, IO_BUS). ++ for (i = 0; i < ms; i++) { ++ OSL_DELAY(1000); ++ } ++} + -+config SIBYTE_BW_TRACE -+ bool "Capture bus trace before bus error" -+ depends on SIBYTE_BUS_WATCHER -+ help -+ Run a continuous bus trace, dumping the raw data as soon as -+ a ZBbus error is detected. Cannot work if ZBbus profiling -+ is turned on, and also will interfere with JTAG-based trace -+ buffer activity. Raw buffer data is dumped to console, and -+ must be processed off-line. -+ -+config SIBYTE_SB1250_PROF -+ bool "Support for SB1/SOC profiling - SB1/SCD perf counters" -+ depends on SIBYTE_SB1xxx_SOC -+ -+config SIBYTE_TBPROF -+ bool "Support for ZBbus profiling" -+ depends on SIBYTE_SB1xxx_SOC -+ -+config SNI_RM200_PCI -+ bool "Support for SNI RM200 PCI" -+ select ARC -+ select ARC32 -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select GENERIC_ISA_DMA -+ select HAVE_STD_PC_SERIAL_PORT -+ select HW_HAS_PCI -+ select I8259 -+ select ISA -+ help -+ The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens -+ Nixdorf Informationssysteme (SNI), parent company of Pyramid -+ Technology and now in turn merged with Fujitsu. Say Y here to -+ support this machine type. -+ -+config TOSHIBA_RBTX4927 -+ bool "Support for Toshiba TBTX49[23]7 board" -+ depends on MIPS32 -+ select DMA_NONCOHERENT -+ select HAS_TXX9_SERIAL -+ select HW_HAS_PCI -+ select I8259 -+ select ISA -+ select SWAP_IO_SPACE -+ help -+ This Toshiba board is based on the TX4927 processor. Say Y here to -+ support this machine type ++/* ++ * Search the name=value vars for a specific one and return its value. ++ * Returns NULL if not found. ++ */ ++char* ++getvar(char *vars, char *name) ++{ ++ char *s; ++ int len; + -+config TOSHIBA_FPCIB0 -+ bool "FPCIB0 Backplane Support" -+ depends on TOSHIBA_RBTX4927 ++ len = strlen(name); + -+config RWSEM_GENERIC_SPINLOCK -+ bool -+ default y ++ /* first look in vars[] */ ++ for (s = vars; s && *s; ) { ++ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) ++ return (&s[len+1]); + -+config RWSEM_XCHGADD_ALGORITHM -+ bool ++ while (*s++) ++ ; ++ } + -+config GENERIC_CALIBRATE_DELAY -+ bool -+ default y ++ /* then query nvram */ ++ return (BCMINIT(nvram_get)(name)); ++} + -+config HAVE_DEC_LOCK -+ bool -+ default y ++/* ++ * Search the vars for a specific one and return its value as ++ * an integer. Returns 0 if not found. ++ */ ++int ++getintvar(char *vars, char *name) ++{ ++ char *val; + -+# -+# Select some configuration options automatically based on user selections. -+# -+config ARC -+ bool -+ depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 -+ default y -+ -+config DMA_COHERENT -+ bool -+ -+config DMA_IP27 -+ bool -+ -+config DMA_NONCOHERENT -+ bool -+ -+config EARLY_PRINTK -+ bool -+ depends on MACH_DECSTATION -+ default y -+ -+config GENERIC_ISA_DMA -+ bool -+ depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA -+ default y -+ -+config I8259 -+ bool -+ depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT -+ default y -+ -+config LIMITED_DMA -+ bool -+ select HIGHMEM -+ -+config MIPS_BONITO64 -+ bool -+ depends on MIPS_ATLAS || MIPS_MALTA -+ default y -+ -+config MIPS_MSC -+ bool -+ depends on MIPS_ATLAS || MIPS_MALTA -+ default y -+ -+config MIPS_NILE4 -+ bool -+ depends on LASAT -+ default y -+ -+config MIPS_DISABLE_OBSOLETE_IDE -+ bool -+ -+config CPU_LITTLE_ENDIAN -+ bool "Generate little endian code" -+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA -+ default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 -+ help -+ Some MIPS machines can be configured for either little or big endian -+ byte order. These modes require different kernels. Say Y if your -+ machine is little endian, N if it's a big endian machine. ++ if ((val = getvar(vars, name)) == NULL) ++ return (0); + -+config IRQ_CPU -+ bool ++ return (bcm_strtoul(val, NULL, 0)); ++} + -+config IRQ_CPU_RM7K -+ bool + -+config IRQ_MV64340 -+ bool ++/* Search for token in comma separated token-string */ ++static int ++findmatch(char *string, char *name) ++{ ++ uint len; ++ char *c; + -+config DDB5XXX_COMMON -+ bool -+ depends on DDB5074 || DDB5476 || DDB5477 -+ default y ++ len = strlen(name); ++ while ((c = strchr(string, ',')) != NULL) { ++ if (len == (uint)(c - string) && !strncmp(string, name, len)) ++ return 1; ++ string = c + 1; ++ } + -+config MIPS_BOARDS_GEN -+ bool -+ depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD -+ default y ++ return (!strcmp(string, name)); ++} + -+config MIPS_GT64111 -+ bool -+ depends on MIPS_COBALT -+ default y ++/* Return gpio pin number assigned to the named pin */ ++/* ++* Variable should be in format: ++* ++* gpio=pin_name,pin_name ++* ++* This format allows multiple features to share the gpio with mutual ++* understanding. ++* ++* 'def_pin' is returned if a specific gpio is not defined for the requested functionality ++* and if def_pin is not used by others. ++*/ ++uint ++getgpiopin(char *vars, char *pin_name, uint def_pin) ++{ ++ char name[] = "gpioXXXX"; ++ char *val; ++ uint pin; + -+config MIPS_GT64120 -+ bool -+ depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT -+ default y ++ /* Go thru all possibilities till a match in pin name */ ++ for (pin = 0; pin < GPIO_NUMPINS; pin ++) { ++ sprintf(name, "gpio%d", pin); ++ val = getvar(vars, name); ++ if (val && findmatch(val, pin_name)) ++ return pin; ++ } + -+config MIPS_TX3927 -+ bool -+ depends on TOSHIBA_JMR3927 -+ select HAS_TXX9_SERIAL -+ default y ++ if (def_pin != GPIO_PIN_NOTDEFINED) { ++ /* make sure the default pin is not used by someone else */ ++ sprintf(name, "gpio%d", def_pin); ++ if (getvar(vars, name)) { ++ def_pin = GPIO_PIN_NOTDEFINED; ++ } ++ } + -+config PCI_MARVELL -+ bool ++ return def_pin; ++} + -+config ITE_BOARD_GEN -+ bool -+ depends on MIPS_IVR || MIPS_ITE8172 -+ default y + -+config SWAP_IO_SPACE -+ bool ++/******************************************************************************* ++ * crc8 ++ * ++ * Computes a crc8 over the input data using the polynomial: ++ * ++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 ++ * ++ * The caller provides the initial value (either CRC8_INIT_VALUE ++ * or the previous returned value) to allow for processing of ++ * discontiguous blocks of data. When generating the CRC the ++ * caller is responsible for complementing the final return value ++ * and inserting it into the byte stream. When checking, a final ++ * return value of CRC8_GOOD_VALUE indicates a valid CRC. ++ * ++ * Reference: Dallas Semiconductor Application Note 27 ++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", ++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., ++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt ++ * ++ ******************************************************************************/ + -+# -+# Unfortunately not all GT64120 systems run the chip at the same clock. -+# As the user for the clock rate and try to minimize the available options. -+# -+choice -+ prompt "Galileo Chip Clock" -+ #default SYSCLK_83 if MIPS_EV64120 -+ depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G -+ default SYSCLK_83 if MIPS_EV64120 -+ default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G ++static uint8 crc8_table[256] = { ++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, ++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, ++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, ++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, ++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, ++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, ++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, ++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, ++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, ++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, ++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, ++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, ++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, ++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, ++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, ++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, ++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, ++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, ++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, ++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, ++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, ++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, ++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, ++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, ++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, ++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, ++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, ++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, ++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, ++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, ++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, ++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F ++}; + -+config SYSCLK_75 -+ bool "75" if MIPS_EV64120 ++#define CRC_INNER_LOOP(n, c, x) \ ++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] + -+config SYSCLK_83 -+ bool "83.3" if MIPS_EV64120 ++uint8 ++hndcrc8( ++ uint8 *pdata, /* pointer to array of data to process */ ++ uint nbytes, /* number of input data bytes to process */ ++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ ++) ++{ ++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro ++ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ ++ while (nbytes-- > 0) ++ crc = crc8_table[(crc ^ *pdata++) & 0xff]; + -+config SYSCLK_100 -+ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G ++ return crc; ++} + -+endchoice ++#ifdef notdef ++#define CLEN 1499 ++#define CBUFSIZ (CLEN+4) ++#define CNBUFS 5 + -+config AU1X00_USB_DEVICE -+ bool -+ depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 -+ default n ++#endif + -+config MIPS_GT96100 -+ bool -+ depends on MIPS_EV96100 -+ default y -+ help -+ Say Y here to support the Galileo Technology GT96100 communications -+ controller card. There is a web page at . -+ -+config IT8172_CIR -+ bool -+ depends on MIPS_ITE8172 || MIPS_IVR -+ default y -+ -+config IT8712 -+ bool -+ depends on MIPS_ITE8172 -+ default y -+ -+config BOOT_ELF32 -+ bool -+ depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI -+ default y -+ -+config MIPS_L1_CACHE_SHIFT -+ int -+ default "4" if MACH_DECSTATION -+ default "7" if SGI_IP27 -+ default "5" -+ -+config ARC32 -+ bool -+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 -+ default y -+ -+config FB -+ bool -+ depends on MIPS_MAGNUM_4000 || OLIVETTI_M700 -+ default y -+ ---help--- -+ The frame buffer device provides an abstraction for the graphics -+ hardware. It represents the frame buffer of some video hardware and -+ allows application software to access the graphics hardware through -+ a well-defined interface, so the software doesn't need to know -+ anything about the low-level (hardware register) stuff. -+ -+ Frame buffer devices work identically across the different -+ architectures supported by Linux and make the implementation of -+ application programs easier and more portable; at this point, an X -+ server exists which uses the frame buffer device exclusively. -+ On several non-X86 architectures, the frame buffer device is the -+ only way to use the graphics hardware. -+ -+ The device is accessed through special device nodes, usually located -+ in the /dev directory, i.e. /dev/fb*. -+ -+ You need an utility program called fbset to make full use of frame -+ buffer devices. Please read -+ and the Framebuffer-HOWTO at -+ for more information. -+ -+ Say Y here and to the driver for your graphics board below if you -+ are compiling a kernel for a non-x86 architecture. -+ -+ If you are compiling for the x86 architecture, you can say Y if you -+ want to play with it, but it is not essential. Please note that -+ running graphical applications that directly touch the hardware -+ (e.g. an accelerated X server) and that are not frame buffer -+ device-aware may cause unexpected results. If unsure, say N. -+ -+config HAVE_STD_PC_SERIAL_PORT -+ bool -+ -+config VR4181 -+ bool -+ depends on NEC_OSPREY -+ default y -+ -+config ARC_CONSOLE -+ bool "ARC console support" -+ depends on SGI_IP22 || SNI_RM200_PCI -+ -+config ARC_MEMORY -+ bool -+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 -+ default y -+ -+config ARC_PROMLIB -+ bool -+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 -+ default y -+ -+config ARC64 -+ bool -+ depends on SGI_IP27 -+ default y -+ -+config BOOT_ELF64 -+ bool -+ depends on SGI_IP27 -+ default y -+ -+#config MAPPED_PCI_IO y -+# bool -+# depends on SGI_IP27 -+# default y -+ -+config QL_ISP_A64 -+ bool -+ depends on SGI_IP27 -+ default y -+ -+config TOSHIBA_BOARDS -+ bool -+ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 -+ default y -+ -+endmenu -+ -+menu "CPU selection" -+ -+choice -+ prompt "CPU type" -+ default CPU_R4X00 -+ -+config CPU_MIPS32 -+ bool "MIPS32" -+ -+config CPU_MIPS64 -+ bool "MIPS64" -+ -+config CPU_R3000 -+ bool "R3000" -+ depends on MIPS32 -+ help -+ Please make sure to pick the right CPU type. Linux/MIPS is not -+ designed to be generic, i.e. Kernels compiled for R3000 CPUs will -+ *not* work on R4000 machines and vice versa. However, since most -+ of the supported machines have an R4000 (or similar) CPU, R4x00 -+ might be a safe bet. If the resulting kernel does not work, -+ try to recompile with R3000. -+ -+config CPU_TX39XX -+ bool "R39XX" -+ depends on MIPS32 -+ -+config CPU_VR41XX -+ bool "R41xx" -+ help -+ The options selects support for the NEC VR41xx series of processors. -+ Only choose this option if you have one of these processors as a -+ kernel built with this option will not run on any other type of -+ processor or vice versa. + -+config CPU_R4300 -+ bool "R4300" -+ help -+ MIPS Technologies R4300-series processors. +diff -urN linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c +--- linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-12-15 17:11:05.818041750 +0100 +@@ -0,0 +1,102 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+config CPU_R4X00 -+ bool "R4x00" -+ help -+ MIPS Technologies R4000-series processors other than 4300, including -+ the R4000, R4400, R4600, and 4700. ++#define LINUX_OSL + -+config CPU_TX49XX -+ bool "R49XX" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#ifdef mips ++#include ++#endif ++#include + -+config CPU_R5000 -+ bool "R5000" -+ help -+ MIPS Technologies R5000-series processors other than the Nevada. ++#define PCI_CFG_RETRY 10 ++ ++#define OS_HANDLE_MAGIC 0x1234abcd ++#define BCM_MEM_FILENAME_LEN 24 ++ ++typedef struct bcm_mem_link { ++ struct bcm_mem_link *prev; ++ struct bcm_mem_link *next; ++ uint size; ++ int line; ++ char file[BCM_MEM_FILENAME_LEN]; ++} bcm_mem_link_t; ++ ++struct os_handle { ++ uint magic; ++ void *pdev; ++ uint malloced; ++ uint failed; ++ bcm_mem_link_t *dbgmem_list; ++}; + -+config CPU_R5432 -+ bool "R5432" -+ -+config CPU_R6000 -+ bool "R6000" -+ depends on MIPS32 && EXPERIMENTAL -+ help -+ MIPS Technologies R6000 and R6000A series processors. Note these -+ processors are extremly rare and the support for them is incomplete. -+ -+config CPU_NEVADA -+ bool "RM52xx" -+ help -+ QED / PMC-Sierra RM52xx-series ("Nevada") processors. -+ -+config CPU_R8000 -+ bool "R8000" -+ depends on MIPS64 && EXPERIMENTAL -+ help -+ MIPS Technologies R8000 processors. Note these processors are -+ uncommon and the support for them is incomplete. -+ -+config CPU_R10000 -+ bool "R10000" -+ help -+ MIPS Technologies R10000-series processors. ++uint32 ++osl_pci_read_config(osl_t *osh, uint offset, uint size) ++{ ++ uint val; ++ uint retry=PCI_CFG_RETRY; + -+config CPU_RM7000 -+ bool "RM7000" ++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); + -+config CPU_RM9000 -+ bool "RM9000" ++ /* only 4byte access supported */ ++ ASSERT(size == 4); + -+config CPU_SB1 -+ bool "SB1" ++ do { ++ pci_read_config_dword(osh->pdev, offset, &val); ++ if (val != 0xffffffff) ++ break; ++ } while (retry--); + -+endchoice + -+choice -+ prompt "Kernel page size" -+ default PAGE_SIZE_4KB ++ return (val); ++} + -+config PAGE_SIZE_4KB -+ bool "4kB" -+ help -+ This option select the standard 4kB Linux page size. On some -+ R3000-family processors this is the only available page size. Using -+ 4kB page size will minimize memory consumption and is therefore -+ recommended for low memory systems. -+ -+config PAGE_SIZE_8KB -+ bool "8kB" -+ depends on EXPERIMENTAL && CPU_R8000 -+ help -+ Using 8kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available -+ only on the R8000 processor. Not that at the time of this writing -+ this option is still high experimental; there are also issues with -+ compatibility of user applications. -+ -+config PAGE_SIZE_16KB -+ bool "16kB" -+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX -+ help -+ Using 16kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available on -+ all non-R3000 family processor. Not that at the time of this -+ writing this option is still high experimental; there are also -+ issues with compatibility of user applications. -+ -+config PAGE_SIZE_64KB -+ bool "64kB" -+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX -+ help -+ Using 64kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available on -+ all non-R3000 family processor. Not that at the time of this -+ writing this option is still high experimental; there are also -+ issues with compatibility of user applications. ++void ++osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val) ++{ ++ uint retry=PCI_CFG_RETRY; + -+endchoice ++ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC))); + -+config BOARD_SCACHE -+ bool ++ /* only 4byte access supported */ ++ ASSERT(size == 4); + -+config IP22_CPU_SCACHE -+ bool -+ select BOARD_SCACHE ++ do { ++ pci_write_config_dword(osh->pdev, offset, val); ++ if (offset!=PCI_BAR0_WIN) ++ break; ++ if (osl_pci_read_config(osh,offset,size) == val) ++ break; ++ } while (retry--); + -+config R5000_CPU_SCACHE -+ bool -+ select BOARD_SCACHE ++} + -+config RM7000_CPU_SCACHE -+ bool -+ select BOARD_SCACHE ++void ++osl_delay(uint usec) ++{ ++ uint d; + -+config SIBYTE_DMA_PAGEOPS -+ bool "Use DMA to clear/copy pages" -+ depends on CPU_SB1 -+ help -+ Instead of using the CPU to zero and copy pages, use a Data Mover -+ channel. These DMA channels are otherwise unused by the standard -+ SiByte Linux port. Seems to give a small performance benefit. -+ -+config CPU_HAS_PREFETCH -+ bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2 -+ default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 -+ -+config VTAG_ICACHE -+ bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32 -+ default y if CPU_SB1 -+ -+config SB1_PASS_1_WORKAROUNDS -+ bool -+ depends on CPU_SB1_PASS_1 -+ default y -+ -+config SB1_PASS_2_WORKAROUNDS -+ bool -+ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) -+ default y -+ -+config SB1_PASS_2_1_WORKAROUNDS -+ bool -+ depends on CPU_SB1 && CPU_SB1_PASS_2 -+ default y -+ -+config 64BIT_PHYS_ADDR -+ bool "Support for 64-bit physical address space" -+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32 -+ -+config CPU_ADVANCED -+ bool "Override CPU Options" -+ depends on MIPS32 -+ help -+ Saying yes here allows you to select support for various features -+ your CPU may or may not have. Most people should say N here. ++ while (usec > 0) { ++ d = MIN(usec, 1000); ++ udelay(d); ++ usec -= d; ++ } ++} + -+config CPU_HAS_LLSC -+ bool "ll/sc Instructions available" if CPU_ADVANCED -+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX -+ help -+ MIPS R4000 series and later provide the Load Linked (ll) -+ and Store Conditional (sc) instructions. More information is -+ available at . +diff -urN linux.old/arch/mips/bcm947xx/broadcom/nvram.c linux.dev/arch/mips/bcm947xx/broadcom/nvram.c +--- linux.old/arch/mips/bcm947xx/broadcom/nvram.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/nvram.c 2005-12-15 17:36:23.151078000 +0100 +@@ -0,0 +1,145 @@ ++/* ++ * NVRAM variable manipulation (Linux kernel half) ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ Say Y here if your CPU has the ll and sc instructions. Say Y here -+ for better performance, N if you don't know. You must say Y here -+ for multiprocessor machines. ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+config CPU_HAS_LLDSCD -+ bool "lld/scd Instructions available" if CPU_ADVANCED -+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32 -+ help -+ Say Y here if your CPU has the lld and scd instructions, the 64-bit -+ equivalents of ll and sc. Say Y here for better performance, N if -+ you don't know. You must say Y here for multiprocessor machines. ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+config CPU_HAS_WB -+ bool "Writeback Buffer available" if CPU_ADVANCED -+ default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION -+ help -+ Say N here for slightly better performance. You must say Y here for -+ machines which require flushing of write buffers in software. Saying -+ Y is the safe option; N may result in kernel malfunction and crashes. ++/* In BSS to minimize text size and page aligned so it can be mmap()-ed */ ++static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE))); + -+config CPU_HAS_SYNC -+ bool -+ depends on !CPU_R3000 -+ default y ++/* Global SB handle */ ++extern void *sbh; ++extern spinlock_t bcm947xx_sbh_lock; + -+# -+# - Highmem only makes sense for the 32-bit kernel. -+# - The current highmem code will only work properly on physically indexed -+# caches such as R3000, SB1, R7000 or those that look like they're virtually -+# indexed such as R4000/R4400 SC and MC versions or R10000. So for the -+# moment we protect the user and offer the highmem option only on machines -+# where it's known to be safe. This will not offer highmem on a few systems -+# such as MIPS32 and MIPS64 CPUs which may have virtual and physically -+# indexed CPUs but we're playing safe. -+# - We should not offer highmem for system of which we already know that they -+# don't have memory configurations that could gain from highmem support in -+# the kernel because they don't support configurations with RAM at physical -+# addresses > 0x20000000. -+# -+config HIGHMEM -+ bool "High Memory Support" -+ depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX) -+ -+config SMP -+ bool "Multi-Processing support" -+ depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 -+ ---help--- -+ This enables support for systems with more than one CPU. If you have -+ a system with only one CPU, like most personal computers, say N. If -+ you have a system with more than one CPU, say Y. -+ -+ If you say N here, the kernel will run on single and multiprocessor -+ machines, but will use only one CPU of a multiprocessor machine. If -+ you say Y here, the kernel will run on many, but not all, -+ singleprocessor machines. On a singleprocessor machine, the kernel -+ will run faster if you say N here. -+ -+ People using multiprocessor machines who say Y here should also say -+ Y to "Enhanced Real Time Clock Support", below. -+ -+ See also the and the SMP-HOWTO -+ available at . -+ -+ If you don't know what to do here, say N. -+ -+config NR_CPUS -+ int "Maximum number of CPUs (2-64)" -+ range 2 64 -+ depends on SMP -+ default "64" if SGI_IP27 -+ default "2" -+ help -+ This allows you to specify the maximum number of CPUs which this -+ kernel will support. The maximum supported value is 32 for 32-bit -+ kernel and 64 for 64-bit kernels; the minimum value which makes -+ sense is 2. ++/* Convenience */ ++#define sbh_lock bcm947xx_sbh_lock ++#define KB * 1024 ++#define MB * 1024 * 1024 + -+ This is purely to save memory - each supported CPU adds -+ approximately eight kilobytes to the kernel image. ++/* Probe for NVRAM header */ ++static void __init ++early_nvram_init(void) ++{ ++ struct nvram_header *header; ++ chipcregs_t *cc; ++ struct sflash *info = NULL; ++ int i; ++ uint32 base, off, lim; ++ u32 *src, *dst; ++ ++ if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ base = KSEG1ADDR(SB_FLASH2); ++ switch (readl(&cc->capabilities) & CAP_FLASH_MASK) { ++ case PFLASH: ++ lim = SB_FLASH2_SZ; ++ break; + -+config PREEMPT -+ bool "Preemptible Kernel" -+ help -+ This option reduces the latency of the kernel when reacting to -+ real-time or interactive events by allowing a low priority process to -+ be preempted even if it is in kernel mode executing a system call. -+ This allows applications to run more reliably even when the system is -+ under load. -+ -+config RTC_DS1742 -+ bool "DS1742 BRAM/RTC support" -+ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 -+ -+config MIPS_INSANE_LARGE -+ bool "Support for large 64-bit configurations" -+ depends on CPU_R10000 && MIPS64 -+ help -+ MIPS R10000 does support a 44 bit / 16TB address space as opposed to -+ previous 64-bit processors which only supported 40 bit / 1TB. If you -+ need processes of more than 1TB virtual address space, say Y here. -+ This will result in additional memory usage, so it is not -+ recommended for normal users. ++ case SFLASH_ST: ++ case SFLASH_AT: ++ if ((info = sflash_init(cc)) == NULL) ++ return; ++ lim = info->size; ++ break; + -+config RWSEM_GENERIC_SPINLOCK -+ bool -+ default y ++ case FLASH_NONE: ++ default: ++ return; ++ } ++ } else { ++ /* extif assumed, Stop at 4 MB */ ++ base = KSEG1ADDR(SB_FLASH1); ++ lim = SB_FLASH1_SZ; ++ } + -+endmenu ++ off = FLASH_MIN; ++ while (off <= lim) { ++ /* Windowed flash access */ ++ header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ off <<= 1; ++ } + -+menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" ++ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ ++ header = (struct nvram_header *) KSEG1ADDR(base + 4 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ header = (struct nvram_header *) KSEG1ADDR(base + 1 KB); ++ if (header->magic == NVRAM_MAGIC) ++ goto found; ++ ++ printk("early_nvram_init: NVRAM not found\n"); ++ return; + -+config HW_HAS_PCI -+ bool ++found: ++ src = (u32 *) header; ++ dst = (u32 *) nvram_buf; ++ for (i = 0; i < sizeof(struct nvram_header); i += 4) ++ *dst++ = *src++; ++ for (; i < header->len && i < NVRAM_SPACE; i += 4) ++ *dst++ = ltoh32(*src++); ++} + -+config PCI -+ bool "Support for PCI controller" -+ depends on HW_HAS_PCI -+ help -+ Find out whether you have a PCI motherboard. PCI is the name of a -+ bus system, i.e. the way the CPU talks to the other stuff inside -+ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, -+ say Y, otherwise N. ++/* Early (before mm or mtd) read-only access to NVRAM */ ++char * __init nvram_get(const char *name) ++{ ++ char *var, *value, *end, *eq; + -+ The PCI-HOWTO, available from -+ , contains valuable -+ information about which PCI hardware does work under Linux and which -+ doesn't. ++ if (!name) ++ return NULL; + -+config PCI_DOMAINS -+ bool -+ depends on PCI ++ /* Too early? */ ++ if (sbh == NULL) ++ return NULL; + -+source "drivers/pci/Kconfig" ++ if (!nvram_buf[0]) ++ early_nvram_init(); + -+# -+# ISA support is now enabled via select. Too many systems still have the one -+# or other ISA chip on the board that users don't know about so don't expect -+# users to choose the right thing ... -+# -+config ISA -+ bool ++ /* Look for name=value and return value */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var = value + strlen(value) + 1) { ++ if (!(eq = strchr(var, '='))) ++ break; ++ value = eq + 1; ++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) ++ return value; ++ } + -+config EISA -+ bool "EISA support" -+ depends on SGI_IP22 || SNI_RM200_PCI -+ select ISA -+ ---help--- -+ The Extended Industry Standard Architecture (EISA) bus was -+ developed as an open alternative to the IBM MicroChannel bus. ++ return NULL; ++} + -+ The EISA bus provided some of the features of the IBM MicroChannel -+ bus while maintaining backward compatibility with cards made for -+ the older ISA bus. The EISA bus saw limited use between 1988 and -+ 1995 when it was made obsolete by the PCI bus. ++EXPORT_SYMBOL(nvram_get); +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbmips.c linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c +--- linux.old/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c 2005-12-15 16:46:31.122961250 +0100 +@@ -0,0 +1,1038 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane MIPS core routines ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ Say Y here if you are building a kernel for an EISA-based machine. ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ Otherwise, say N. ++/* ++ * Returns TRUE if an external UART exists at the given base ++ * register. ++ */ ++static bool ++BCMINITFN(serial_exists)(uint8 *regs) ++{ ++ uint8 save_mcr, status1; + -+source "drivers/eisa/Kconfig" ++ save_mcr = R_REG(®s[UART_MCR]); ++ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); ++ status1 = R_REG(®s[UART_MSR]) & 0xf0; ++ W_REG(®s[UART_MCR], save_mcr); + -+config TC -+ bool "TURBOchannel support" -+ depends on MACH_DECSTATION -+ help -+ TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS -+ processors. Documentation on writing device drivers for TurboChannel -+ is available at: -+ . ++ return (status1 == 0x90); ++} + -+#config ACCESSBUS -+# bool "Access.Bus support" -+# depends on TC ++/* ++ * Initializes UART access. The callback function will be called once ++ * per found UART. ++ */ ++void ++BCMINITFN(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) ++{ ++ void *regs; ++ ulong base; ++ uint irq; ++ int i, n; + -+config MMU -+ bool -+ default y ++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { ++ extifregs_t *eir = (extifregs_t *) regs; ++ sbconfig_t *sb; + -+config MCA -+ bool ++ /* Determine external UART register base */ ++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); ++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); + -+config SBUS -+ bool ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); + -+source "drivers/pcmcia/Kconfig" ++ /* Disable GPIO interrupt initially */ ++ W_REG(&eir->gpiointpolarity, 0); ++ W_REG(&eir->gpiointmask, 0); + -+source "drivers/pci/hotplug/Kconfig" ++ /* Search for external UARTs */ ++ n = 2; ++ for (i = 0; i < 2; i++) { ++ regs = (void *) REG_MAP(base + (i * 8), 8); ++ if (BCMINIT(serial_exists)(regs)) { ++ /* Set GPIO 1 to be the external UART IRQ */ ++ W_REG(&eir->gpiointmask, 2); ++ if (add) ++ add(regs, irq, 13500000, 0); ++ } ++ } + -+endmenu ++ /* Add internal UART if enabled */ ++ if (R_REG(&eir->corecontrol) & CC_UE) ++ if (add) ++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); ++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 rev, cap, pll, baud_base, div; + -+menu "Executable file formats" ++ /* Determine core revision and capabilities */ ++ rev = sb_corerev(sbh); ++ cap = R_REG(&cc->capabilities); ++ pll = cap & CAP_PLL_MASK; + -+source "fs/Kconfig.binfmt" ++ /* Determine IRQ */ ++ irq = sb_irq(sbh); + -+config TRAD_SIGNALS -+ bool -+ default y if MIPS32 ++ if (pll == PLL_TYPE1) { ++ /* PLL clock */ ++ baud_base = sb_clock_rate(pll, ++ R_REG(&cc->clockcontrol_n), ++ R_REG(&cc->clockcontrol_m2)); ++ div = 1; ++ } else { ++ if (rev >= 11) { ++ /* Fixed ALP clock */ ++ baud_base = 20000000; ++ div = 1; ++ /* Set the override bit so we don't divide it */ ++ W_REG(&cc->corecontrol, CC_UARTCLKO); ++ } else if (rev >= 3) { ++ /* Internal backplane clock */ ++ baud_base = sb_clock(sbh); ++ div = 2; /* Minimum divisor */ ++ W_REG(&cc->clkdiv, ++ ((R_REG(&cc->clkdiv) & ~CLKD_UART) | div)); ++ } else { ++ /* Fixed internal backplane clock */ ++ baud_base = 88000000; ++ div = 48; ++ } + -+config BUILD_ELF64 -+ bool "Use 64-bit ELF format for building" -+ depends on MIPS64 -+ help -+ A 64-bit kernel is usually built using the 64-bit ELF binary object -+ format as it's one that allows arbitrary 64-bit constructs. For -+ kernels that are loaded within the KSEG compatibility segments the -+ 32-bit ELF format can optionally be used resulting in a somewhat -+ smaller binary, but this option is not explicitly supported by the -+ toolchain and since binutils 2.14 it does not even work at all. ++ /* Clock source depends on strapping if UartClkOverride is unset */ ++ if ((rev > 0) && ++ ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { ++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { ++ /* Internal divided backplane clock */ ++ baud_base /= div; ++ } else { ++ /* Assume external clock of 1.8432 MHz */ ++ baud_base = 1843200; ++ } ++ } ++ } + -+ Say Y to use the 64-bit format or N to use the 32-bit one. ++ /* Add internal UARTs */ ++ n = cap & CAP_UARTS_MASK; ++ for (i = 0; i < n; i++) { ++ /* Register offset changed after revision 0 */ ++ if (rev) ++ regs = (void *)((ulong) &cc->uart0data + (i * 256)); ++ else ++ regs = (void *)((ulong) &cc->uart0data + (i * 8)); + -+ If unsure say Y. ++ if (add) ++ add(regs, irq, baud_base, 0); ++ } ++ } ++} + -+config BINFMT_IRIX -+ bool "Include IRIX binary compatibility" -+ depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN ++/* ++ * Initialize jtag master and return handle for ++ * jtag_rwreg. Returns NULL on failure. ++ */ ++void * ++sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap) ++{ ++ void *regs; + -+config MIPS32_COMPAT -+ bool "Kernel support for Linux/MIPS 32-bit binary compatibility" -+ depends on MIPS64 -+ help -+ Select this option if you want Linux/MIPS 32-bit binary -+ compatibility. Since all software available for Linux/MIPS is -+ currently 32-bit you should say Y here. -+ -+config COMPAT -+ bool -+ depends on MIPS32_COMPAT -+ default y -+ -+config MIPS32_O32 -+ bool "Kernel support for o32 binaries" -+ depends on MIPS32_COMPAT -+ help -+ Select this option if you want to run o32 binaries. These are pure -+ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of -+ existing binaries are in this format. ++ if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) { ++ chipcregs_t *cc = (chipcregs_t *) regs; ++ uint32 tmp; + -+ If unsure, say Y. ++ /* ++ * Determine jtagm availability from ++ * core revision and capabilities. ++ */ ++ tmp = sb_corerev(sbh); ++ /* ++ * Corerev 10 has jtagm, but the only chip ++ * with it does not have a mips, and ++ * the layout of the jtagcmd register is ++ * different. We'll only accept >= 11. ++ */ ++ if (tmp < 11) ++ return (NULL); ++ ++ tmp = R_REG(&cc->capabilities); ++ if ((tmp & CAP_JTAGP) == 0) ++ return (NULL); ++ ++ /* Set clock divider if requested */ ++ if (clkd != 0) { ++ tmp = R_REG(&cc->clkdiv); ++ tmp = (tmp & ~CLKD_JTAG) | ++ ((clkd << CLKD_JTAG_SHIFT) & CLKD_JTAG); ++ W_REG(&cc->clkdiv, tmp); ++ } + -+config MIPS32_N32 -+ bool "Kernel support for n32 binaries" -+ depends on MIPS32_COMPAT -+ help -+ Select this option if you want to run n32 binaries. These are -+ 64-bit binaries using 32-bit quantities for addressing and certain -+ data that would normally be 64-bit. They are used in special -+ cases. ++ /* Enable jtagm */ ++ tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0); ++ W_REG(&cc->jtagctrl, tmp); ++ } + -+ If unsure, say N. ++ return (regs); ++} + -+config BINFMT_ELF32 -+ bool -+ default y if MIPS32_O32 || MIPS32_N32 ++void ++sb_jtagm_disable(void *h) ++{ ++ chipcregs_t *cc = (chipcregs_t *)h; + -+config PM -+ bool "Power Management support (EXPERIMENTAL)" -+ depends on EXPERIMENTAL && MACH_AU1X00 ++ W_REG(&cc->jtagctrl, R_REG(&cc->jtagctrl) & ~JCTRL_EN); ++} + -+endmenu ++/* ++ * Read/write a jtag register. Assumes a target with ++ * 8 bit IR and 32 bit DR. ++ */ ++#define IRWIDTH 8 ++#define DRWIDTH 32 ++uint32 ++jtag_rwreg(void *h, uint32 ir, uint32 dr) ++{ ++ chipcregs_t *cc = (chipcregs_t *) h; ++ uint32 tmp; + -+source "drivers/Kconfig" ++ W_REG(&cc->jtagir, ir); ++ W_REG(&cc->jtagdr, dr); ++ tmp = JCMD_START | JCMD_ACC_IRDR | ++ ((IRWIDTH - 1) << JCMD_IRW_SHIFT) | ++ (DRWIDTH - 1); ++ W_REG(&cc->jtagcmd, tmp); ++ while (((tmp = R_REG(&cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) { ++ /* OSL_DELAY(1); */ ++ } + -+source "fs/Kconfig" ++ tmp = R_REG(&cc->jtagdr); ++ return (tmp); ++} + -+source "arch/mips/Kconfig.debug" ++/* Returns the SB interrupt flag of the current core. */ ++uint32 ++sb_flag(sb_t *sbh) ++{ ++ void *regs; ++ sbconfig_t *sb; + -+source "security/Kconfig" ++ regs = sb_coreregs(sbh); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+source "crypto/Kconfig" ++ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK); ++} + -+source "lib/Kconfig" ++static const uint32 sbips_int_mask[] = { ++ 0, ++ SBIPS_INT1_MASK, ++ SBIPS_INT2_MASK, ++ SBIPS_INT3_MASK, ++ SBIPS_INT4_MASK ++}; + -+# -+# Use the generic interrupt handling code in kernel/irq/: -+# -+config GENERIC_HARDIRQS -+ bool -+ default y -+ -+config GENERIC_IRQ_PROBE -+ bool -+ default y -+ -+config ISA_DMA_API -+ bool -+ default y -diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile ---- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-08-28 16:39:59.077334424 +0200 -@@ -79,7 +79,7 @@ - cflags-y += -I $(TOPDIR)/include/asm/gcc - cflags-y += -G 0 -mno-abicalls -fno-pic -pipe - cflags-y += $(call cc-option, -finline-limit=100000) --LDFLAGS_vmlinux += -G 0 -static -n -+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib - MODFLAGS += -mlong-calls - - cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer -@@ -167,9 +167,10 @@ - $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ - -Wa,--trap - --cflags-$(CONFIG_CPU_MIPS32) += \ -- $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ -- -Wa,--trap -+#cflags-$(CONFIG_CPU_MIPS32) += \ -+# $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ -+# -Wa,--trap -+cflags-$(CONFIG_CPU_MIPS32) += -mips2 -Wa,--trap - - cflags-$(CONFIG_CPU_MIPS64) += \ - $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \ -@@ -618,6 +619,14 @@ - load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 - - # -+# Broadcom BCM47XX boards -+# -+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/ -+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include -+load-$(CONFIG_BCM947XX) := 0xffffffff80001000 -+ -+ -+# - # SNI RM200 PCI - # - core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/ -@@ -729,6 +738,7 @@ - archclean: - @$(MAKE) $(clean)=arch/mips/boot - @$(MAKE) $(clean)=arch/mips/lasat -+ @$(MAKE) -C arch/mips/bcm47xx/compressed clean - - # Generate -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include /* for sprom content groking */ ++ flag = sb_flag(sbh); + -+#define VARS_MAX 4096 /* should be reduced */ ++ idx = sb_coreidx(sbh); + -+static int initvars_srom_pci(void *curmap, char **vars, int *count); -+static int initvars_cis_pcmcia(void *osh, char **vars, int *count); -+static int sprom_cmd_pcmcia(void *osh, uint8 cmd); -+static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data); -+static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data); -+static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc); ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+/* -+ * Initialize the vars from the right source for this platform. -+ * Return 0 on success, nonzero on error. -+ */ -+int -+srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count) -+{ -+ if (vars == NULL) -+ return (0); ++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ ++ sbipsflag = R_REG(&sb->sbipsflag); ++ for (irq = 1; irq <= 4; irq++) { ++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) ++ break; ++ } ++ if (irq == 5) ++ irq = 0; ++ } + -+ switch (bus) { -+ case SB_BUS: -+ /* These two could be asserts ... */ -+ *vars = NULL; -+ *count = 0; -+ return(0); ++ sb_setcoreidx(sbh, idx); + -+ case PCI_BUS: -+ ASSERT(curmap); /* can not be NULL */ -+ return(initvars_srom_pci(curmap, vars, count)); ++ return irq; ++} + -+ case PCMCIA_BUS: -+ return(initvars_cis_pcmcia(osh, vars, count)); ++/* Clears the specified MIPS IRQ. */ ++static void ++BCMINITFN(sb_clearirq)(sb_t *sbh, uint irq) ++{ ++ void *regs; ++ sbconfig_t *sb; + ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+ default: -+ ASSERT(0); -+ } -+ return (-1); ++ if (irq == 0) ++ W_REG(&sb->sbintvec, 0); ++ else ++ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); +} + -+ -+/* support only 16-bit word read from srom */ -+int -+srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) ++/* ++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS ++ * IRQ 0 may be assigned more than once. ++ */ ++static void ++BCMINITFN(sb_setirq)(sb_t *sbh, uint irq, uint coreid, uint coreunit) +{ -+ void *srom; -+ uint i, off, nw; ++ void *regs; ++ sbconfig_t *sb; ++ uint32 flag; + -+ /* check input - 16-bit access only */ -+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) -+ return 1; ++ regs = sb_setcore(sbh, coreid, coreunit); ++ ASSERT(regs); ++ flag = sb_flag(sbh); + -+ if (bus == PCI_BUS) { -+ if (!curmap) -+ return 1; -+ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET); -+ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE)) -+ return 1; -+ } else if (bus == PCMCIA_BUS) { -+ off = byteoff / 2; -+ nw = nbytes / 2; -+ for (i = 0; i < nw; i++) { -+ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) -+ return 1; -+ } -+ } else { -+ return 1; -+ } ++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(regs); ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+ return 0; ++ if (irq == 0) ++ OR_REG(&sb->sbintvec, 1 << flag); ++ else { ++ flag <<= sbips_int_shift[irq]; ++ ASSERT(!(flag & ~sbips_int_mask[irq])); ++ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; ++ W_REG(&sb->sbipsflag, flag); ++ } +} + -+/* support only 16-bit word write into srom */ -+int -+srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) ++/* ++ * Initializes clocks and interrupts. SB and NVRAM access must be ++ * initialized prior to calling. ++ */ ++void ++BCMINITFN(sb_mips_init)(sb_t *sbh) +{ -+ uint16 *srom; -+ uint i, off, nw, crc_range; -+ uint16 image[SPROM_SIZE], *p; -+ uint8 crc; -+ volatile uint32 val32; ++ ulong hz, ns, tmp; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ char *value; ++ uint irq; + -+ /* check input - 16-bit access only */ -+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) -+ return 1; ++ /* Figure out current SB clock speed */ ++ if ((hz = sb_clock(sbh)) == 0) ++ hz = 100000000; ++ ns = 1000000000 / hz; + -+ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; ++ /* Setup external interface timing */ ++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { ++ /* Initialize extif so we can get to the LEDs and external UART */ ++ W_REG(&eir->prog_config, CF_EN); + -+ /* if changes made inside crc cover range */ -+ if (byteoff < crc_range) { -+ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; -+ /* read data including entire first 64 words from srom */ -+ if (srom_read(bus, curmap, osh, 0, nw * 2, image)) -+ return 1; -+ /* make changes */ -+ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); -+ /* calculate crc */ -+ htol16_buf(image, crc_range); -+ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); -+ ltoh16_buf(image, crc_range); -+ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); -+ p = image; -+ off = 0; -+ } else { -+ p = buf; -+ off = byteoff / 2; -+ nw = nbytes / 2; -+ } ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ + -+ if (bus == PCI_BUS) { -+ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET); -+ /* enable writes to the SPROM */ -+ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); -+ val32 |= SPROM_WRITEEN; -+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); -+ bcm_mdelay(500); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ W_REG(&srom[off + i], p[i]); -+ bcm_mdelay(20); ++ /* Set programmable interface timing for external uart */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ ++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ ++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ ++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { ++ /* Set timing for the flash */ ++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ ++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ ++ tmp |= CEIL(120, ns); /* W0 = 120nS */ ++ ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ { ++ W_REG(&cc->flash_waitcount, tmp); ++ W_REG(&cc->pcmcia_memwait, tmp); + } -+ /* disable writes to the SPROM */ -+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); -+ } else if (bus == PCMCIA_BUS) { -+ /* enable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WEN)) -+ return 1; -+ bcm_mdelay(500); -+ /* write srom */ -+ for (i = 0; i < nw; i++) { -+ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]); -+ bcm_mdelay(20); ++ else ++ { ++ if (sb_corerev(sbh) < 9) ++ W_REG(&cc->flash_waitcount, tmp); ++ ++ if ((sb_corerev(sbh) < 9) || ++ ((BCMINIT(sb_chip)(sbh) == BCM5350_DEVICE_ID) && BCMINIT(sb_chiprev)(sbh) == 0)) { ++ W_REG(&cc->pcmcia_memwait, tmp); ++ } + } -+ /* disable writes to the SPROM */ -+ if (sprom_cmd_pcmcia(osh, SROM_WDS)) -+ return 1; -+ } else { -+ return 1; + } + -+ bcm_mdelay(500); -+ return 0; ++ /* Chip specific initialization */ ++ switch (BCMINIT(sb_chip)(sbh)) { ++ case BCM4710_DEVICE_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ BCMINIT(sb_clearirq)(sbh, irq); ++ BCMINIT(sb_setirq)(sbh, 0, SB_CODEC, 0); ++ BCMINIT(sb_setirq)(sbh, 0, SB_EXTIF, 0); ++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 1); ++ BCMINIT(sb_setirq)(sbh, 3, SB_ILINE20, 0); ++ BCMINIT(sb_setirq)(sbh, 4, SB_PCI, 0); ++ ASSERT(eir); ++ value = BCMINIT(nvram_get)("et0phyaddr"); ++ if (value && !strcmp(value, "31")) { ++ /* Enable internal UART */ ++ W_REG(&eir->corecontrol, CC_UE); ++ /* Give USB its own interrupt */ ++ BCMINIT(sb_setirq)(sbh, 1, SB_USB, 0); ++ } else { ++ /* Disable internal UART */ ++ W_REG(&eir->corecontrol, 0); ++ /* Give Ethernet its own interrupt */ ++ BCMINIT(sb_setirq)(sbh, 1, SB_ENET, 0); ++ BCMINIT(sb_setirq)(sbh, 0, SB_USB, 0); ++ } ++ break; ++ case BCM5350_DEVICE_ID: ++ /* Clear interrupt map */ ++ for (irq = 0; irq <= 4; irq++) ++ BCMINIT(sb_clearirq)(sbh, irq); ++ BCMINIT(sb_setirq)(sbh, 0, SB_CC, 0); ++ BCMINIT(sb_setirq)(sbh, 1, SB_D11, 0); ++ BCMINIT(sb_setirq)(sbh, 2, SB_ENET, 0); ++ BCMINIT(sb_setirq)(sbh, 3, SB_PCI, 0); ++ BCMINIT(sb_setirq)(sbh, 4, SB_USB, 0); ++ break; ++ } +} + -+ -+int -+srom_parsecis(uint8 *cis, char **vars, int *count) ++uint32 ++BCMINITFN(sb_mips_clock)(sb_t *sbh) +{ -+ char eabuf[32]; -+ char *vp, *base; -+ uint8 tup, tlen, sromrev = 1; -+ int i, j; -+ uint varsize; -+ bool ag_init = FALSE; -+ uint16 w; -+ -+ ASSERT(vars); -+ ASSERT(count); -+ -+ base = vp = MALLOC(VARS_MAX); -+ ASSERT(vp); -+ -+ i = 0; -+ do { -+ tup = cis[i++]; -+ tlen = cis[i++]; ++ extifregs_t *eir; ++ chipcregs_t *cc; ++ uint32 n, m; ++ uint idx; ++ uint32 pll_type, rate = 0; + -+ switch (tup) { -+ case CISTPL_MANFID: -+ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); -+ vp++; -+ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); -+ vp++; -+ break; ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ pll_type = PLL_TYPE1; + -+ case CISTPL_FUNCE: -+ if (cis[i] == LAN_NID) { -+ ASSERT(cis[i + 1] == ETHER_ADDR_LEN); -+ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; -+ } -+ break; ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ n = R_REG(&eir->clockcontrol_n); ++ m = R_REG(&eir->clockcontrol_sb); ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ n = R_REG(&cc->clockcontrol_n); ++ if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) ++ m = R_REG(&cc->clockcontrol_mips); ++ else if (pll_type == PLL_TYPE5) { ++ rate = 200000000; ++ goto out; ++ } ++ else if (pll_type == PLL_TYPE3) { ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) { /* 5365 is also type3 */ ++ rate = 200000000; ++ goto out; ++ } else ++ m = R_REG(&cc->clockcontrol_m2); /* 5350 uses m2 to control mips */ ++ } else ++ m = R_REG(&cc->clockcontrol_sb); ++ } else ++ goto out; + -+ case CISTPL_CFTABLE: -+ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); -+ vp++; -+ break; ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ rate = 100000000; ++ else ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); + -+ case CISTPL_BRCM_HNBU: -+ switch (cis[i]) { -+ case HNBU_CHIPID: -+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]); -+ vp++; -+ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]); -+ vp++; -+ if (tlen == 7) { -+ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]); -+ vp++; -+ } -+ break; ++ if (pll_type == PLL_TYPE6) ++ rate = SB2MIPS_T6(rate); + -+ case HNBU_BOARDREV: -+ vp += sprintf(vp, "boardrev=%d", cis[i + 1]); -+ vp++; -+ break; ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); + -+ case HNBU_AA: -+ vp += sprintf(vp, "aa0=%d", cis[i + 1]); -+ vp++; -+ break; ++ return rate; ++} + -+ case HNBU_AG: -+ vp += sprintf(vp, "ag0=%d", cis[i + 1]); -+ vp++; -+ ag_init = TRUE; -+ break; ++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) + -+ case HNBU_CC: -+ vp += sprintf(vp, "cc=%d", cis[i + 1]); -+ vp++; -+ break; ++static void ++BCMINITFN(handler)(void) ++{ ++ /* Step 11 */ ++ __asm__ ( ++ ".set\tmips32\n\t" ++ "ssnop\n\t" ++ "ssnop\n\t" ++ /* Disable interrupts */ ++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ ++ "mfc0 $15, $12\n\t" ++ /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ ++ "li $14, -31746\n\t" ++ "and $15, $15, $14\n\t" ++ "mtc0 $15, $12\n\t" ++ "eret\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set\tmips0" ++ ); ++} + -+ case HNBU_PAPARMS: -+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]); -+ vp++; -+ if (tlen == 9) { -+ /* New version */ -+ for (j = 0; j < 3; j++) { -+ vp += sprintf(vp, "pa0b%d=%d", j, -+ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]); -+ vp++; -+ } -+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); -+ vp++; -+ } -+ break; ++/* The following MUST come right after handler() */ ++static void ++BCMINITFN(afterhandler)(void) ++{ ++} + -+ case HNBU_OEM: -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4], -+ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]); -+ vp++; -+ break; -+ case HNBU_BOARDFLAGS: -+ w = (cis[i + 2] << 8) + cis[i + 1]; -+ if (w == 0xffff) w = 0; -+ vp += sprintf(vp, "boardflags=%d", w); -+ vp++; -+ break; -+ case HNBU_LED: -+ if (cis[i + 1] != 0xff) { -+ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]); -+ vp++; -+ } -+ if (cis[i + 2] != 0xff) { -+ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]); -+ vp++; -+ } -+ if (cis[i + 3] != 0xff) { -+ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]); -+ vp++; -+ } -+ if (cis[i + 4] != 0xff) { -+ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]); -+ vp++; -+ } -+ break; -+ } -+ break; ++/* ++ * Set the MIPS, backplane and PCI clocks as closely as possible. ++ */ ++bool ++BCMINITFN(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) ++{ ++ extifregs_t *eir = NULL; ++ chipcregs_t *cc = NULL; ++ mipsregs_t *mipsr = NULL; ++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; ++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; ++ uint32 pll_type, sync_mode; ++ uint ic_size, ic_lsize; ++ uint idx, i; ++ typedef struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 pci25; ++ } n3m_table_t; ++ static n3m_table_t BCMINITDATA(type1_table)[] = { ++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ ++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ ++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ ++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */ ++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */ ++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */ ++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */ ++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */ ++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */ ++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */ ++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */ ++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */ ++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */ ++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */ ++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */ ++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */ ++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */ ++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */ ++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */ ++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */ ++ }; ++ typedef struct { ++ uint32 mipsclock; ++ uint16 n; ++ uint32 m2; /* that is the clockcontrol_m2 */ ++ } type3_table_t; ++ static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */ ++ { 150000000, 0x311, 0x4020005 }, ++ { 200000000, 0x311, 0x4020003 }, ++ }; ++ typedef struct { ++ uint32 mipsclock; ++ uint32 sbclock; ++ uint16 n; ++ uint32 sb; ++ uint32 pci33; ++ uint32 m2; ++ uint32 m3; ++ uint32 ratio_cfg; ++ uint32 ratio_parm; ++ } n4m_table_t; + -+ } -+ i += tlen; -+ } while (tup != 0xff); ++ static n4m_table_t BCMINITDATA(type2_table)[] = { ++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555 }, ++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555 }, ++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, ++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555 }, ++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 8, 0x012a00a9 }, ++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 11, 0x0aaa0555 } ++ }; + -+ /* Set the srom version */ -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; ++ static n4m_table_t BCMINITDATA(type4_table)[] = { ++ { 192000000, 96000000, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 198000000, 99000000, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, ++ { 204000000, 102000000, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 208000000, 104000000, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 210000000, 105000000, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 216000000, 108000000, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 224000000, 112000000, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, 0x012a00a9 }, ++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 240000000, 102857143, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, 0x254a14a9 }, ++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, 0x0aaa0555 }, ++ { 252000000, 100800000, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, 0x02520129 }, ++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, ++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555 }, ++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9 }, ++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, 0x02520129 }, ++ { 300000000, 150000000, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555 } ++ }; + -+ /* For now just set boardflags2 to zero */ -+ vp += sprintf(vp, "boardflags2=0"); -+ vp++; ++ static n4m_table_t BCMINITDATA(type7_table)[] = { ++ { 183333333, 91666666, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 187500000, 93750000, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555 }, ++ { 196875000, 98437500, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555 }, ++ { 200000000, 100000000, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555 }, ++ { 206250000, 103125000, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 212500000, 106250000, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 215625000, 107812500, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 216666666, 108333333, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 225000000, 112500000, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 233333333, 116666666, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555 }, ++ { 237500000, 118750000, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555 }, ++ { 240000000, 120000000, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555 }, ++ { 250000000, 125000000, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555 } ++ }; + -+ /* if there is no antenna gain field, set default */ -+ if (ag_init == FALSE) { -+ vp += sprintf(vp, "ag0=%d", 0xff); -+ vp++; -+ } ++ ulong start, end, dst; ++ bool ret = FALSE; + -+ /* final nullbyte terminator */ -+ *vp++ = '\0'; -+ varsize = (uint)vp - (uint)base; ++ /* get index of the current core */ ++ idx = sb_coreidx(sbh); ++ clockcontrol_m2 = NULL; + -+ ASSERT(varsize < VARS_MAX); ++ /* switch to extif or chipc core */ ++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { ++ pll_type = PLL_TYPE1; ++ clockcontrol_n = &eir->clockcontrol_n; ++ clockcontrol_sb = &eir->clockcontrol_sb; ++ clockcontrol_pci = &eir->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { ++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; ++ if (pll_type == PLL_TYPE6) { ++ clockcontrol_n = NULL; ++ clockcontrol_sb = NULL; ++ clockcontrol_pci = NULL; ++ } else { ++ clockcontrol_n = &cc->clockcontrol_n; ++ clockcontrol_sb = &cc->clockcontrol_sb; ++ clockcontrol_pci = &cc->clockcontrol_pci; ++ clockcontrol_m2 = &cc->clockcontrol_m2; ++ } ++ } else ++ goto done; + -+ if (varsize == VARS_MAX) { -+ *vars = base; ++ if (pll_type == PLL_TYPE6) { ++ /* Silence compilers */ ++ orig_n = orig_sb = orig_pci = 0; + } else { -+ vp = MALLOC(varsize); -+ ASSERT(vp); -+ bcopy(base, vp, varsize); -+ MFREE(base, VARS_MAX); -+ *vars = vp; ++ /* Store the current clock register values */ ++ orig_n = R_REG(clockcontrol_n); ++ orig_sb = R_REG(clockcontrol_sb); ++ orig_pci = R_REG(clockcontrol_pci); + } -+ *count = varsize; -+ -+ return (0); -+} + ++ if (pll_type == PLL_TYPE1) { ++ /* Keep the current PCI clock if not specified */ ++ if (pciclock == 0) { ++ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci)); ++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; ++ } + -+/* set PCMCIA sprom command register */ -+static int -+sprom_cmd_pcmcia(void *osh, uint8 cmd) -+{ -+ uint8 status; -+ uint wait_cnt = 1000; ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ ++ for (i = 0; i < ARRAYSIZE(BCMINIT(type1_table)); i++) { ++ ASSERT(BCMINIT(type1_table)[i].mipsclock == ++ sb_clock_rate(pll_type, BCMINIT(type1_table)[i].n, BCMINIT(type1_table)[i].sb)); ++ if (BCMINIT(type1_table)[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(BCMINIT(type1_table)[i].mipsclock <= mipsclock); + -+ /* write sprom command register */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); ++ /* No PLL change */ ++ if ((orig_n == BCMINIT(type1_table)[i].n) && ++ (orig_sb == BCMINIT(type1_table)[i].sb) && ++ (orig_pci == BCMINIT(type1_table)[i].pci33)) ++ goto done; + -+ /* wait status */ -+ while (wait_cnt--) { -+ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); -+ if (status & SROM_DONE) -+ return 0; -+ } -+ return 1; -+} ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, BCMINIT(type1_table)[i].n); ++ W_REG(clockcontrol_sb, BCMINIT(type1_table)[i].sb); ++ if (pciclock == 25000000) ++ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci25); ++ else ++ W_REG(clockcontrol_pci, BCMINIT(type1_table)[i].pci33); + -+/* read a word from the PCMCIA srom */ -+static int -+sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; ++ /* Reset */ ++ sb_watchdog(sbh, 1); + -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); ++ while (1); ++ } else if ((pll_type == PLL_TYPE3) && ++ (BCMINIT(sb_chip)(sbh) != BCM5365_DEVICE_ID)) { ++ /* 5350 */ ++ /* Search for the closest MIPS clock less than or equal to a preferred value */ + -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); ++ for (i = 0; i < ARRAYSIZE(type3_table); i++) { ++ if (type3_table[i].mipsclock > mipsclock) ++ break; ++ } ++ if (i == 0) { ++ ret = FALSE; ++ goto done; ++ } else { ++ ret = TRUE; ++ i--; ++ } ++ ASSERT(type3_table[i].mipsclock <= mipsclock); + -+ /* do read */ -+ if (sprom_cmd_pcmcia(osh, SROM_READ)) -+ return 1; ++ /* No PLL change */ ++ orig_m2 = R_REG(&cc->clockcontrol_m2); ++ if ((orig_n == type3_table[i].n) && ++ (orig_m2 == type3_table[i].m2)) { ++ goto done; ++ } + -+ /* read data */ -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, type3_table[i].n); ++ W_REG(clockcontrol_m2, type3_table[i].m2); + -+ *data = (data_h << 8) | data_l; -+ return 0; -+} ++ /* Reset */ ++ sb_watchdog(sbh, 1); ++ while (1); ++ } else if ((pll_type == PLL_TYPE2) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE6) || ++ (pll_type == PLL_TYPE7)) { ++ n4m_table_t *table = NULL, *te; ++ uint tabsz = 0; + -+/* write a word to the PCMCIA srom */ -+static int -+sprom_write_pcmcia(void *osh, uint16 addr, uint16 data) -+{ -+ uint8 addr_l, addr_h, data_l, data_h; ++ ASSERT(cc); + -+ addr_l = (uint8)((addr * 2) & 0xff); -+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff); -+ data_l = (uint8)(data & 0xff); -+ data_h = (uint8)((data >> 8) & 0xff); ++ orig_mips = R_REG(&cc->clockcontrol_mips); + -+ /* set address */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); ++ if (pll_type == PLL_TYPE6) { ++ uint32 new_mips = 0; + -+ /* write data */ -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); -+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); ++ ret = TRUE; ++ if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) ++ new_mips = CC_T6_MMASK; + -+ /* do write */ -+ return sprom_cmd_pcmcia(osh, SROM_WRITE); -+} ++ if (orig_mips == new_mips) ++ goto done; + -+/* -+ * Read in and validate sprom. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc) -+{ -+ int off, nw; -+ uint8 chk8; -+ int i; ++ W_REG(&cc->clockcontrol_mips, new_mips); ++ goto end_fill; ++ } + -+ off = byteoff / 2; -+ nw = ROUNDUP(nbytes, 2) / 2; ++ if (pll_type == PLL_TYPE2) { ++ table = BCMINIT(type2_table); ++ tabsz = ARRAYSIZE(BCMINIT(type2_table)); ++ } else if (pll_type == PLL_TYPE4) { ++ table = BCMINIT(type4_table); ++ tabsz = ARRAYSIZE(BCMINIT(type4_table)); ++ } else if (pll_type == PLL_TYPE7) { ++ table = BCMINIT(type7_table); ++ tabsz = ARRAYSIZE(BCMINIT(type7_table)); ++ } else ++ ASSERT("No table for plltype" == NULL); + -+ /* read the sprom */ -+ for (i = 0; i < nw; i++) -+ buf[i] = R_REG(&sprom[off + i]); ++ /* Store the current clock register values */ ++ orig_m2 = R_REG(&cc->clockcontrol_m2); ++ orig_ratio_parm = 0; ++ orig_ratio_cfg = 0; + -+ if (check_crc) { -+ /* fixup the endianness so crc8 will pass */ -+ htol16_buf(buf, nw * 2); -+ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE) -+ return (1); -+ /* now correct the endianness of the byte array */ -+ ltoh16_buf(buf, nw * 2); -+ } ++ /* Look up current ratio */ ++ for (i = 0; i < tabsz; i++) { ++ if ((orig_n == table[i].n) && ++ (orig_sb == table[i].sb) && ++ (orig_pci == table[i].pci33) && ++ (orig_m2 == table[i].m2) && ++ (orig_mips == table[i].m3)) { ++ orig_ratio_parm = table[i].ratio_parm; ++ orig_ratio_cfg = table[i].ratio_cfg; ++ break; ++ } ++ } + -+ return (0); -+} ++ /* Search for the closest MIPS clock greater or equal to a preferred value */ ++ for (i = 0; i < tabsz; i++) { ++ ASSERT(table[i].mipsclock == ++ sb_clock_rate(pll_type, table[i].n, table[i].m3)); ++ if ((mipsclock <= table[i].mipsclock) && ++ ((sbclock == 0) || (sbclock <= table[i].sbclock))) ++ break; ++ } ++ if (i == tabsz) { ++ ret = FALSE; ++ goto done; ++ } else { ++ te = &table[i]; ++ ret = TRUE; ++ } + -+/* -+ * Initialize nonvolatile variable table from sprom. -+ * Return 0 on success, nonzero on error. -+ */ ++ /* No PLL change */ ++ if ((orig_n == te->n) && ++ (orig_sb == te->sb) && ++ (orig_pci == te->pci33) && ++ (orig_m2 == te->m2) && ++ (orig_mips == te->m3)) ++ goto done; + -+static int -+initvars_srom_pci(void *curmap, char **vars, int *count) -+{ -+ uint16 w, b[64]; -+ uint8 sromrev; -+ struct ether_addr ea; -+ char eabuf[32]; -+ int c, woff, i; -+ char *vp, *base; ++ /* Set the PLL controls */ ++ W_REG(clockcontrol_n, te->n); ++ W_REG(clockcontrol_sb, te->sb); ++ W_REG(clockcontrol_pci, te->pci33); ++ W_REG(&cc->clockcontrol_m2, te->m2); ++ W_REG(&cc->clockcontrol_mips, te->m3); ++ ++ /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ ++ if ((pll_type == PLL_TYPE7) && ++ (te->sb != te->m2) && ++ (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) ++ W_REG(&cc->chipcontrol, R_REG(&cc->chipcontrol) | 0x100); + -+ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE)) -+ return (-1); ++ /* No ratio change */ ++ if (orig_ratio_parm == te->ratio_parm) ++ goto end_fill; + -+ /* top word of sprom contains version and crc8 */ -+ sromrev = b[63] & 0xff; -+ if ((sromrev != 1) && (sromrev != 2)) { -+ return (-2); -+ } ++ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); + -+ ASSERT(vars); -+ ASSERT(count); ++ /* Preload the code into the cache */ ++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); ++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); ++ while (start < end) { ++ cache_op(start, Fill_I); ++ start += ic_lsize; ++ } + -+ base = vp = MALLOC(VARS_MAX); -+ ASSERT(vp); ++ /* Copy the handler */ ++ start = (ulong) &BCMINIT(handler); ++ end = (ulong) &BCMINIT(afterhandler); ++ dst = KSEG1ADDR(0x180); ++ for (i = 0; i < (end - start); i += 4) ++ *((ulong *)(dst + i)) = *((ulong *)(start + i)); + -+ vp += sprintf(vp, "sromrev=%d", sromrev); -+ vp++; ++ /* Preload handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += 4) ++ cache_op(dst + i, Fill_I); + -+ if (sromrev >= 2) { -+ /* New section takes over the 4th hardware function space */ ++ /* Clear BEV bit */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); + -+ /* Word 28 is boardflags2 */ -+ vp += sprintf(vp, "boardflags2=%d", b[28]); -+ vp++; ++ /* Enable interrupts */ ++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); + -+ /* Word 29 is max power 11a high/low */ -+ w = b[29]; -+ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); -+ vp++; ++ /* Enable MIPS timer interrupt */ ++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && ++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) ++ ASSERT(mipsr); ++ W_REG(&mipsr->intmask, 1); + -+ /* Words 30-32 set the 11alow pa settings, -+ * 33-35 are the 11ahigh ones. -+ */ -+ for (i = 0; i < 3; i++) { -+ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); -+ vp++; -+ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); -+ vp++; -+ } -+ w = b[59]; -+ if (w == 0) -+ vp += sprintf(vp, "ccode="); -+ else -+ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); -+ vp++; ++ start_fill: ++ /* step 1, set clock ratios */ ++ MTC0(C0_BROADCOM, 3, te->ratio_parm); ++ MTC0(C0_BROADCOM, 1, te->ratio_cfg); + -+ } ++ /* step 2: program timer intr */ ++ W_REG(&mipsr->timer, 100); ++ (void) R_REG(&mipsr->timer); + -+ /* parameter section of sprom starts at byte offset 72 */ -+ woff = 72/2; ++ /* step 3, switch to async */ ++ sync_mode = MFC0(C0_BROADCOM, 4); ++ MTC0(C0_BROADCOM, 4, 1 << 22); + -+ /* first 6 bytes are il0macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += ETHER_ADDR_LEN/2 ; -+ bcm_ether_ntoa((uchar*)&ea, eabuf); -+ vp += sprintf(vp, "il0macaddr=%s", eabuf); -+ vp++; ++ /* step 4, set cfg active */ ++ MTC0(C0_BROADCOM, 2, 0x9); + -+ /* next 6 bytes are et0macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += ETHER_ADDR_LEN/2 ; -+ bcm_ether_ntoa((uchar*)&ea, eabuf); -+ vp += sprintf(vp, "et0macaddr=%s", eabuf); -+ vp++; + -+ /* next 6 bytes are et1macaddr */ -+ ea.octet[0] = (b[woff] >> 8) & 0xff; -+ ea.octet[1] = b[woff] & 0xff; -+ ea.octet[2] = (b[woff+1] >> 8) & 0xff; -+ ea.octet[3] = b[woff+1] & 0xff; -+ ea.octet[4] = (b[woff+2] >> 8) & 0xff; -+ ea.octet[5] = b[woff+2] & 0xff; -+ woff += ETHER_ADDR_LEN/2 ; -+ bcm_ether_ntoa((uchar*)&ea, eabuf); -+ vp += sprintf(vp, "et1macaddr=%s", eabuf); -+ vp++; ++ /* steps 5 & 6 */ ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); + -+ /* -+ * Enet phy settings one or two singles or a dual -+ * Bits 4-0 : MII address for enet0 (0x1f for not there) -+ * Bits 9-5 : MII address for enet1 (0x1f for not there) -+ * Bit 14 : Mdio for enet0 -+ * Bit 15 : Mdio for enet1 -+ */ -+ w = b[woff]; -+ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); -+ vp++; -+ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); -+ vp++; -+ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); -+ vp++; -+ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); -+ vp++; ++ /* step 7, clear cfg_active */ ++ MTC0(C0_BROADCOM, 2, 0); + -+ /* Word 46 has board rev, antennas 0/1 & Country code/control */ -+ w = b[46]; -+ vp += sprintf(vp, "boardrev=%d", w & 0xff); -+ vp++; ++ /* Additional Step: set back to orig sync mode */ ++ MTC0(C0_BROADCOM, 4, sync_mode); + -+ if (sromrev > 1) -+ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); -+ else -+ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); -+ vp++; ++ /* step 8, fake soft reset */ ++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4); + -+ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); -+ vp++; ++ end_fill: ++ /* step 9 set watchdog timer */ ++ sb_watchdog(sbh, 20); ++ (void) R_REG(&cc->chipid); + -+ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); -+ vp++; ++ /* step 11 */ ++ __asm__ __volatile__ ( ++ ".set\tmips3\n\t" ++ "sync\n\t" ++ "wait\n\t" ++ ".set\tmips0" ++ ); ++ while (1); ++ } + -+ /* Words 47-49 set the (wl) pa settings */ -+ woff = 47; ++done: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); + -+ for (i = 0; i < 3; i++) { -+ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); -+ vp++; -+ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); -+ vp++; -+ } ++ return ret; ++} + -+ /* -+ * Words 50-51 set the customer-configured wl led behavior. -+ * 8 bits/gpio pin. High bit: activehi=0, activelo=1; -+ * LED behavior values defined in wlioctl.h . -+ */ -+ w = b[50]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* gpio0 */ -+ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); -+ vp++; ++/* ++ * This also must be run from the cache on 47xx ++ * so there are no mips core BIU ops in progress ++ * when the PFC is enabled. ++ */ + -+ /* gpio1 */ -+ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ w = b[51]; -+ if ((w != 0) && (w != 0xffff)) { -+ /* gpio2 */ -+ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); -+ vp++; ++static void ++BCMINITFN(_enable_pfc)(uint32 mode) ++{ ++ /* write range */ ++ *(volatile uint32 *)PFC_CR1 = 0xffff0000; + -+ /* gpio3 */ -+ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); -+ vp++; -+ } -+ -+ /* Word 52 is max power 0/1 */ -+ w = b[52]; -+ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); -+ vp++; ++ /* enable */ ++ *(volatile uint32 *)PFC_CR0 = mode; ++} + -+ /* Word 56 is idle tssi target 0/1 */ -+ w = b[56]; -+ vp += sprintf(vp, "pa0itssit=%d", w & 0xff); -+ vp++; -+ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); -+ vp++; ++void ++BCMINITFN(enable_pfc)(uint32 mode) ++{ ++ ulong start, end; ++ int i; + -+ /* Word 57 is boardflags, if not programmed make it zero */ -+ w = b[57]; -+ if (w == 0xffff) w = 0; -+ vp += sprintf(vp, "boardflags=%d", w); -+ vp++; ++ /* If auto then choose the correct mode for this ++ platform, currently we only ever select one mode */ ++ if (mode == PFC_AUTO) ++ mode = PFC_INST; + -+ /* Word 58 is antenna gain 0/1 */ -+ w = b[58]; -+ vp += sprintf(vp, "ag0=%d", w & 0xff); -+ vp++; ++ /* enable prefetch cache if available */ ++ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { ++ start = (ulong) &BCMINIT(_enable_pfc); ++ end = (ulong) &BCMINIT(enable_pfc); + -+ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); -+ vp++; ++ /* Preload handler into the cache one line at a time */ ++ for (i = 0; i < (end - start); i += 4) ++ cache_op(start + i, Fill_I); + -+ if (sromrev == 1) { -+ /* set the oem string */ -+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", -+ ((b[59] >> 8) & 0xff), (b[59] & 0xff), -+ ((b[60] >> 8) & 0xff), (b[60] & 0xff), -+ ((b[61] >> 8) & 0xff), (b[61] & 0xff), -+ ((b[62] >> 8) & 0xff), (b[62] & 0xff)); -+ vp++; ++ BCMINIT(_enable_pfc)(mode); + } ++} + -+ /* final nullbyte terminator */ -+ *vp++ = '\0'; -+ -+ c = vp - base; -+ ASSERT(c <= VARS_MAX); ++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ ++uint32 ++BCMINITFN(sb_memc_get_ncdl)(sb_t *sbh) ++{ ++ sbmemcregs_t *memc; ++ uint32 ret = 0; ++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; ++ uint idx, rev; + -+ if (c == VARS_MAX) { -+ *vars = base; -+ } else { -+ vp = MALLOC(c); -+ ASSERT(vp); -+ bcopy(base, vp, c); -+ MFREE(base, VARS_MAX); -+ *vars = vp; -+ } -+ *count = c; ++ idx = sb_coreidx(sbh); + -+ return (0); -+} ++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); ++ if (memc == 0) ++ goto out; + -+/* -+ * Read the cis and call parsecis to initialize the vars. -+ * Return 0 on success, nonzero on error. -+ */ -+static int -+initvars_cis_pcmcia(void *osh, char **vars, int *count) -+{ -+ uint8 *cis = NULL; -+ int rc; ++ rev = sb_corerev(sbh); + -+ if ((cis = MALLOC(CIS_SIZE)) == NULL) -+ return (-1); ++ config = R_REG(&memc->config); ++ wr = R_REG(&memc->wrncdlcor); ++ rd = R_REG(&memc->rdncdlcor); ++ misc = R_REG(&memc->miscdlyctl); ++ dqsg = R_REG(&memc->dqsgatencdl); + -+ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE); ++ rd &= MEMC_RDNCDLCOR_RD_MASK; ++ wr &= MEMC_WRNCDLCOR_WR_MASK; ++ dqsg &= MEMC_DQSGATENCDL_G_MASK; + -+ rc = srom_parsecis(cis, vars, count); ++ if (config & MEMC_CONFIG_DDR) { ++ ret = (wr << 16) | (rd << 8) | dqsg; ++ } else { ++ if (rev > 0) ++ cd = rd; ++ else ++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); ++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; ++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; ++ ret = (sm << 16) | (sd << 8) | cd; ++ } + -+ MFREE(cis, CIS_SIZE); ++out: ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); + -+ return (rc); ++ return ret; +} + -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200 -@@ -0,0 +1,691 @@ +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbpci.c linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c +--- linux.old/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c 2005-12-15 20:09:46.562233250 +0100 +@@ -0,0 +1,529 @@ +/* -+ * Misc useful OS-independent routines. ++ * Low-Level PCI and SB support for BCM47xx + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ + +#include ++#include ++#include ++#include +#include -+#include ++#include ++#include +#include ++#include +#include ++#include + -+unsigned char bcm_ctype[] = { -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ -+ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ -+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ -+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ -+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ -+ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ -+ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ -+ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ -+ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ -+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ -+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ -+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ -+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ -+}; -+ -+uchar -+bcm_toupper(uchar c) -+{ -+ if (bcm_islower(c)) -+ c -= 'a'-'A'; -+ return (c); -+} -+ -+ulong -+bcm_strtoul(char *cp, char **endp, uint base) -+{ -+ ulong result, value; -+ bool minus; -+ -+ minus = FALSE; -+ -+ while (bcm_isspace(*cp)) -+ cp++; -+ -+ if (cp[0] == '+') -+ cp++; -+ else if (cp[0] == '-') { -+ minus = TRUE; -+ cp++; -+ } -+ -+ if (base == 0) { -+ if (cp[0] == '0') { -+ if ((cp[1] == 'x') || (cp[1] == 'X')) { -+ base = 16; -+ cp = &cp[2]; -+ } else { -+ base = 8; -+ cp = &cp[1]; -+ } -+ } else -+ base = 10; -+ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { -+ cp = &cp[2]; -+ } -+ -+ result = 0; -+ -+ while (bcm_isxdigit(*cp) && -+ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { -+ result = result*base + value; -+ cp++; -+ } ++/* Can free sbpci_init() memory after boot */ ++#ifndef linux ++#define __init ++#endif + -+ if (minus) -+ result = (ulong)(result * -1); ++/* Emulated configuration space */ ++static pci_config_regs sb_config_regs[SB_MAXCORES]; + -+ if (endp) -+ *endp = (char *)cp; ++/* Banned cores */ ++static uint16 pci_ban[32] = { 0 }; ++static uint pci_banned = 0; + -+ return (result); -+} ++/* CardBus mode */ ++static bool cardbus = FALSE; + -+uint -+bcm_atoi(char *s) -+{ -+ uint n; ++/* Disable PCI host core */ ++static bool pci_disabled = FALSE; + -+ n = 0; ++/* ++ * Functions for accessing external PCI configuration space ++ */ + -+ while (bcm_isdigit(*s)) -+ n = (n * 10) + *s++ - '0'; -+ return (n); -+} ++/* Assume one-hot slot wiring */ ++#define PCI_SLOT_MAX 16 + -+void -+deadbeef(char *p, uint len) ++static uint32 ++config_cmd(sb_t *sbh, uint bus, uint dev, uint func, uint off) +{ -+ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef }; -+ -+ while (len-- > 0) { -+ *p = meat[((uint)p) & 3]; -+ p++; -+ } -+} ++ uint coreidx; ++ sbpciregs_t *regs; ++ uint32 addr = 0; + -+/* pretty hex print a contiguous buffer */ -+void -+prhex(char *msg, uchar *buf, uint nbytes) -+{ -+ char line[256]; -+ char* p; -+ uint i; ++ /* CardBusMode supports only one device */ ++ if (cardbus && dev > 1) ++ return 0; + -+ if (msg && (msg[0] != '\0')) -+ printf("%s: ", msg); ++ coreidx = sb_coreidx(sbh); ++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); + -+ p = line; -+ for (i = 0; i < nbytes; i++) { -+ if (i % 16 == 0) { -+ p += sprintf(p, "%04d: ", i); /* line prefix */ -+ } -+ p += sprintf(p, "%02x ", buf[i]); -+ if (i % 16 == 15) { -+ printf("%s\n", line); /* flush line */ -+ p = line; ++ /* Type 0 transaction */ ++ if (bus == 1) { ++ /* Skip unwired slots */ ++ if (dev < PCI_SLOT_MAX) { ++ /* Slide the PCI window to the appropriate slot */ ++ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK)); ++ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) | ++ (func << 8) | (off & ~3); + } + } + -+ /* flush last partial line */ -+ if (p != line) -+ printf("%s\n", line); -+} -+ -+/* pretty hex print a pkt buffer chain */ -+void -+prpkt(char *msg, void *drv, void *p0) -+{ -+ void *p; ++ /* Type 1 transaction */ ++ else { ++ W_REG(®s->sbtopci1, SBTOPCI_CFG1); ++ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3); ++ } + -+ if (msg && (msg[0] != '\0')) -+ printf("%s: ", msg); ++ sb_setcoreidx(sbh, coreidx); + -+ for (p = p0; p; p = PKTNEXT(drv, p)) -+ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p)); ++ return addr; +} + -+/* copy a pkt buffer chain into a buffer */ -+uint -+pktcopy(void *drv, void *p, uint offset, int len, uchar *buf) ++static int ++extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ uint n, ret = 0; -+ -+ if (len < 0) -+ len = 4096; /* "infinite" */ ++ uint32 addr, *reg = NULL, val; ++ int ret = 0; + -+ /* skip 'offset' bytes */ -+ for (; p && offset; p = PKTNEXT(drv, p)) { -+ if (offset < (uint)PKTLEN(drv, p)) -+ break; -+ offset -= PKTLEN(drv, p); -+ } ++ if (pci_disabled || ++ !(addr = config_cmd(sbh, bus, dev, func, off)) || ++ !(reg = (uint32 *) REG_MAP(addr, len)) || ++ BUSPROBE(val, reg)) ++ val = 0xffffffff; + -+ if (!p) -+ return 0; ++ val >>= 8 * (off & 3); ++ if (len == 4) ++ *((uint32 *) buf) = val; ++ else if (len == 2) ++ *((uint16 *) buf) = (uint16) val; ++ else if (len == 1) ++ *((uint8 *) buf) = (uint8) val; ++ else ++ ret = -1; + -+ /* copy the data */ -+ for (; p && len; p = PKTNEXT(drv, p)) { -+ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len); -+ bcopy(PKTDATA(drv, p) + offset, buf, n); -+ buf += n; -+ len -= n; -+ ret += n; -+ offset = 0; -+ } ++ if (reg) ++ REG_UNMAP(reg); + + return ret; +} + -+/* return total length of buffer chain */ -+uint -+pkttotlen(void *drv, void *p) ++static int ++extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ uint total; -+ -+ total = 0; -+ for (; p; p = PKTNEXT(drv, p)) -+ total += PKTLEN(drv, p); -+ return (total); -+} ++ uint32 addr, *reg = NULL, val; ++ int ret = 0; + ++ if (pci_disabled || ++ !(addr = config_cmd(sbh, bus, dev, func, off)) || ++ !(reg = (uint32 *) REG_MAP(addr, len)) || ++ BUSPROBE(val, reg)) ++ goto done; + -+uchar* -+bcm_ether_ntoa(char *ea, char *buf) -+{ -+ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", -+ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, -+ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); -+ return (buf); -+} ++ if (len == 4) ++ val = *((uint32 *) buf); ++ else if (len == 2) { ++ val &= ~(0xffff << (8 * (off & 3))); ++ val |= *((uint16 *) buf) << (8 * (off & 3)); ++ } else if (len == 1) { ++ val &= ~(0xff << (8 * (off & 3))); ++ val |= *((uint8 *) buf) << (8 * (off & 3)); ++ } else ++ ret = -1; + -+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ -+int -+bcm_ether_atoe(char *p, char *ea) -+{ -+ int i = 0; ++ W_REG(reg, val); + -+ for (;;) { -+ ea[i++] = (char) bcm_strtoul(p, &p, 16); -+ if (!*p++ || i == 6) -+ break; -+ } ++ done: ++ if (reg) ++ REG_UNMAP(reg); + -+ return (i == 6); ++ return ret; +} + -+/* -+ * Traverse a string of 1-byte tag/1-byte length/variable-length value -+ * triples, returning a pointer to the substring whose first element -+ * matches tag. Stop parsing when we see an element whose ID is greater -+ * than the target key. ++/* ++ * Functions for accessing translated SB configuration space + */ -+bcm_tlv_t * -+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key) ++ ++static int ++sb_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ bcm_tlv_t *elt; -+ int totlen; ++ pci_config_regs *cfg; + -+ elt = (bcm_tlv_t*)buf; -+ totlen = buflen; ++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = &sb_config_regs[dev]; + -+ /* find tagged parameter */ -+ while (totlen >= 2) { -+ uint id = elt->id; -+ int len = elt->len; -+ -+ /* Punt if we start seeing IDs > than target key */ -+ if (id > key) -+ return(NULL); ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); + -+ /* validate remaining totlen */ -+ if ((id == key) && (totlen >= (len + 2))) -+ return (elt); ++ if (len == 4) ++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); ++ else if (len == 2) ++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); ++ else if (len == 1) ++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); ++ else ++ return -1; + -+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); -+ totlen -= (len + 2); -+ } -+ return NULL; ++ return 0; +} + -+ -+/* -+ * Traverse a string of 1-byte tag/1-byte length/variable-length value -+ * triples, returning a pointer to the substring whose first element -+ * matches tag -+ */ -+bcm_tlv_t * -+bcm_parse_tlvs(void *buf, int buflen, uint key) ++static int ++sb_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ bcm_tlv_t *elt; -+ int totlen; -+ -+ elt = (bcm_tlv_t*)buf; -+ totlen = buflen; ++ uint coreidx, n; ++ void *regs; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; + -+ /* find tagged parameter */ -+ while (totlen >= 2) { -+ int len = elt->len; ++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) ++ return -1; ++ cfg = &sb_config_regs[dev]; + -+ /* validate remaining totlen */ -+ if ((elt->id == key) && (totlen >= (len + 2))) -+ return (elt); ++ ASSERT(ISALIGNED(off, len)); ++ ASSERT(ISALIGNED((uintptr)buf, len)); + -+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); -+ totlen -= (len + 2); ++ /* Emulate BAR sizing */ ++ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && ++ len == 4 && *((uint32 *) buf) == ~0) { ++ coreidx = sb_coreidx(sbh); ++ if ((regs = sb_setcoreidx(sbh, dev))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ /* Highest numbered address match register */ ++ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; ++ if (off == OFFSETOF(pci_config_regs, base[0])) ++ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) ++ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) ++ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); ++ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) ++ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1); ++ } ++ sb_setcoreidx(sbh, coreidx); ++ return 0; + } -+ -+ return NULL; ++ ++ if (len == 4) ++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); ++ else if (len == 2) ++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); ++ else if (len == 1) ++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); ++ else ++ return -1; ++ ++ return 0; +} + -+void -+pktqinit(struct pktq *q, int maxlen) ++int ++sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ q->head = q->tail = NULL; -+ q->maxlen = maxlen; -+ q->len = 0; ++ if (bus == 0) ++ return sb_read_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_read_config(sbh, bus, dev, func, off, buf, len); +} + -+void -+pktenq(struct pktq *q, void *p, bool lifo) ++int ++sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) +{ -+ ASSERT(PKTLINK(p) == NULL); -+ -+ PKTSETLINK(p, NULL); -+ -+ if (q->tail == NULL) { -+ ASSERT(q->head == NULL); -+ q->head = q->tail = p; -+ } -+ else { -+ ASSERT(q->head); -+ ASSERT(PKTLINK(q->tail) == NULL); -+ if (lifo) { -+ PKTSETLINK(p, q->head); -+ q->head = p; -+ } else { -+ PKTSETLINK(q->tail, p); -+ q->tail = p; -+ } -+ } -+ q->len++; ++ if (bus == 0) ++ return sb_write_config(sbh, bus, dev, func, off, buf, len); ++ else ++ return extpci_write_config(sbh, bus, dev, func, off, buf, len); +} + -+void* -+pktdeq(struct pktq *q) ++void ++sbpci_ban(uint16 core) +{ -+ void *p; -+ -+ if ((p = q->head)) { -+ ASSERT(q->tail); -+ q->head = PKTLINK(p); -+ PKTSETLINK(p, NULL); -+ q->len--; -+ if (q->head == NULL) -+ q->tail = NULL; -+ } -+ else { -+ ASSERT(q->tail == NULL); -+ } -+ -+ return (p); ++ if (pci_banned < ARRAYSIZE(pci_ban)) ++ pci_ban[pci_banned++] = core; +} + -+/******************************************************************************* -+ * crc8 -+ * -+ * Computes a crc8 over the input data using the polynomial: -+ * -+ * x^8 + x^7 +x^6 + x^4 + x^2 + 1 -+ * -+ * The caller provides the initial value (either CRC8_INIT_VALUE -+ * or the previous returned value) to allow for processing of -+ * discontiguous blocks of data. When generating the CRC the -+ * caller is responsible for complementing the final return value -+ * and inserting it into the byte stream. When checking, a final -+ * return value of CRC8_GOOD_VALUE indicates a valid CRC. -+ * -+ * Reference: Dallas Semiconductor Application Note 27 -+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", -+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., -+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt -+ * -+ ******************************************************************************/ -+ -+static uint8 crc8_table[256] = { -+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, -+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, -+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, -+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, -+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, -+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, -+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, -+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, -+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, -+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, -+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, -+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, -+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, -+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, -+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, -+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, -+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, -+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, -+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, -+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, -+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, -+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, -+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, -+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, -+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, -+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, -+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, -+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, -+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, -+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, -+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, -+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F -+}; -+ -+/* -+ * Search the name=value vars for a specific one and return its value. -+ * Returns NULL if not found. -+ */ -+char* -+getvar(char *vars, char *name) ++static int ++sbpci_init_pci(sb_t *sbh) +{ -+ char *s; -+ int len; -+ -+ len = strlen(name); ++ uint chip, chiprev, chippkg, host; ++ uint32 boardflags; ++ sbpciregs_t *pci; ++ sbconfig_t *sb; ++ uint32 val; + -+ /* first look in vars[] */ -+ for (s = vars; s && *s; ) { -+ if ((bcmp(s, name, len) == 0) && (s[len] == '=')) -+ return (&s[len+1]); ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); + -+ while (*s++) -+ ; ++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) { ++ printf("PCI: no core\n"); ++ pci_disabled = TRUE; ++ return -1; + } ++ sb_core_reset(sbh, 0); + -+ /* then query nvram */ -+ return (nvram_get(name)); -+} ++ boardflags = (uint32) getintvar(NULL, "boardflags"); + -+/* -+ * Search the vars for a specific one and return its value as -+ * an integer. Returns 0 if not found. -+ */ -+int -+getintvar(char *vars, char *name) -+{ -+ char *val; ++ if ((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ++ pci_disabled = TRUE; + -+ if ((val = getvar(vars, name)) == NULL) -+ return (0); ++ /* ++ * The 200-pin BCM4712 package does not bond out PCI. Even when ++ * PCI is bonded out, some boards may leave the pins ++ * floating. ++ */ ++ if (((chip == BCM4712_DEVICE_ID) && ++ ((chippkg == BCM4712SMALL_PKG_ID) || ++ (chippkg == BCM4712MID_PKG_ID))) || ++ (boardflags & BFL_NOPCI)) ++ pci_disabled = TRUE; + -+ return (bcm_strtoul(val, NULL, 0)); -+} ++ /* ++ * If the PCI core should not be touched (disabled, not bonded ++ * out, or pins floating), do not even attempt to access core ++ * registers. Otherwise, try to determine if it is in host ++ * mode. ++ */ ++ if (pci_disabled) ++ host = 0; ++ else ++ host = !BUSPROBE(val, &pci->control); + -+void -+bcm_mdelay(uint ms) -+{ -+ uint i; ++ if (!host) { ++ /* Disable PCI interrupts in client mode */ ++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); ++ W_REG(&sb->sbintvec, 0); + -+ for (i = 0; i < ms; i++) { -+ OSL_DELAY(1000); -+ } -+} ++ /* Disable the PCI bridge in client mode */ ++ sbpci_ban(SB_PCI); ++ printf("PCI: Disabled\n"); ++ } else { ++ /* Reset the external PCI bus and enable the clock */ ++ W_REG(&pci->control, 0x5); /* enable the tristate drivers */ ++ W_REG(&pci->control, 0xd); /* enable the PCI clock */ ++ OSL_DELAY(150); /* delay > 100 us */ ++ W_REG(&pci->control, 0xf); /* deassert PCI reset */ ++ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ ++ OSL_DELAY(1); /* delay 1 us */ + -+#define CRC_INNER_LOOP(n, c, x) \ -+ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] ++ /* Enable CardBusMode */ ++ cardbus = nvram_match("cardbus", "1"); ++ if (cardbus) { ++ printf("PCI: Enabling CardBus\n"); ++ /* GPIO 1 resets the CardBus device on bcm94710ap */ ++ sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY); ++ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); ++ } + -+uint8 -+crc8( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint8 crc /* either CRC8_INIT_VALUE or previous return value */ -+) -+{ -+ /* hard code the crc loop instead of using CRC_INNER_LOOP macro -+ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ -+ while (nbytes-- > 0) -+ crc = crc8_table[(crc ^ *pdata++) & 0xff]; ++ /* 64 MB I/O access window */ ++ W_REG(&pci->sbtopci0, SBTOPCI_IO); ++ /* 64 MB configuration access window */ ++ W_REG(&pci->sbtopci1, SBTOPCI_CFG0); ++ /* 1 GB memory access window */ ++ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); + -+ return crc; ++ /* Enable PCI bridge BAR0 prefetch and burst */ ++ val = 6; ++ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val)); ++ ++ /* Enable PCI interrupts */ ++ W_REG(&pci->intmask, PCI_INTA); ++ } ++ ++ return 0; +} + -+/******************************************************************************* -+ * crc16 -+ * -+ * Computes a crc16 over the input data using the polynomial: -+ * -+ * x^16 + x^12 +x^5 + 1 -+ * -+ * The caller provides the initial value (either CRC16_INIT_VALUE -+ * or the previous returned value) to allow for processing of -+ * discontiguous blocks of data. When generating the CRC the -+ * caller is responsible for complementing the final return value -+ * and inserting it into the byte stream. When checking, a final -+ * return value of CRC16_GOOD_VALUE indicates a valid CRC. -+ * -+ * Reference: Dallas Semiconductor Application Note 27 -+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", -+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., -+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt -+ * -+ ******************************************************************************/ ++static int ++sbpci_init_cores(sb_t *sbh) ++{ ++ uint chip, chiprev, chippkg, coreidx, i; ++ sbconfig_t *sb; ++ pci_config_regs *cfg; ++ void *regs; ++ char varname[8]; ++ uint wlidx = 0; ++ uint16 vendor, core; ++ uint8 class, subclass, progif; ++ uint32 val; ++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; ++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; + -+static uint16 crc16_table[256] = { -+ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF, -+ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7, -+ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E, -+ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876, -+ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD, -+ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5, -+ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C, -+ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974, -+ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB, -+ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3, -+ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A, -+ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72, -+ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9, -+ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1, -+ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738, -+ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70, -+ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7, -+ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF, -+ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036, -+ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E, -+ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5, -+ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD, -+ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134, -+ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C, -+ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3, -+ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB, -+ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232, -+ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A, -+ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1, -+ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9, -+ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330, -+ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78 -+}; ++ chip = sb_chip(sbh); ++ chiprev = sb_chiprev(sbh); ++ chippkg = sb_chippkg(sbh); ++ coreidx = sb_coreidx(sbh); + -+uint16 -+crc16( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint16 crc /* either CRC16_INIT_VALUE or previous return value */ -+) -+{ -+ while (nbytes-- > 0) -+ CRC_INNER_LOOP(16, crc, *pdata++); -+ return crc; -+} ++ /* Scan the SB bus */ ++ bzero(sb_config_regs, sizeof(sb_config_regs)); ++ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) { ++ cfg->vendor = 0xffff; ++ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs))) ++ continue; ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); + -+static uint32 crc32_table[256] = { -+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, -+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, -+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, -+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, -+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, -+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, -+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, -+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, -+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, -+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, -+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, -+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, -+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, -+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, -+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, -+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, -+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, -+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, -+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, -+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, -+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, -+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, -+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, -+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, -+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, -+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, -+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, -+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, -+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, -+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, -+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, -+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, -+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, -+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, -+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, -+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, -+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, -+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, -+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, -+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, -+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, -+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, -+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, -+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, -+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, -+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, -+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, -+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, -+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, -+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, -+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, -+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, -+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, -+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, -+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, -+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, -+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, -+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, -+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, -+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, -+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, -+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, -+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, -+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -+}; ++ /* Read ID register and parse vendor and core */ ++ val = R_REG(&sb->sbidhigh); ++ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT; ++ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; ++ progif = 0; + -+uint32 -+crc32( -+ uint8 *pdata, /* pointer to array of data to process */ -+ uint nbytes, /* number of input data bytes to process */ -+ uint32 crc /* either CRC32_INIT_VALUE or previous return value */ -+) -+{ -+ uint8 *pend; -+#ifdef __mips__ -+ uint8 tmp[4]; -+ ulong *tptr = (ulong *)tmp; -+ -+ /* in case the beginning of the buffer isn't aligned */ -+ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc); -+ nbytes -= (pend - pdata); -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+ -+ /* handle bulk of data as 32-bit words */ -+ pend = pdata + (nbytes & 0xfffffffc); -+ while (pdata < pend) { -+ *tptr = *((ulong *)pdata)++; -+ CRC_INNER_LOOP(32, crc, tmp[0]); -+ CRC_INNER_LOOP(32, crc, tmp[1]); -+ CRC_INNER_LOOP(32, crc, tmp[2]); -+ CRC_INNER_LOOP(32, crc, tmp[3]); -+ } -+ -+ /* 1-3 bytes at end of buffer */ -+ pend = pdata + (nbytes & 0x03); -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+#else -+ pend = pdata + nbytes; -+ while (pdata < pend) -+ CRC_INNER_LOOP(32, crc, *pdata++); -+#endif -+ -+ return crc; -+} ++ /* Check if this core is banned */ ++ for (i = 0; i < pci_banned; i++) ++ if (core == pci_ban[i]) ++ break; ++ if (i < pci_banned) ++ continue; + -+#ifdef notdef -+#define CLEN 1499 -+#define CBUFSIZ (CLEN+4) -+#define CNBUFS 5 ++ /* Known vendor translations */ ++ switch (vendor) { ++ case SB_VEND_BCM: ++ vendor = VENDOR_BROADCOM; ++ break; ++ } + -+void testcrc32(void) -+{ -+ uint j,k,l; -+ uint8 *buf; -+ uint len[CNBUFS]; -+ uint32 crcr; -+ uint32 crc32tv[CNBUFS] = -+ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110}; -+ -+ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL); -+ -+ /* step through all possible alignments */ -+ for (l=0;l<=4;l++) { -+ for (j=0; jvendor = htol16(vendor); ++ cfg->device = htol16(core); ++ cfg->rev_id = chiprev; ++ cfg->prog_if = progif; ++ cfg->sub_class = subclass; ++ cfg->base_class = class; ++ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); ++ cfg->base[1] = htol32(sb_base(R_REG(&sb->sbadmatch1))); ++ cfg->base[2] = htol32(sb_base(R_REG(&sb->sbadmatch2))); ++ cfg->base[3] = htol32(sb_base(R_REG(&sb->sbadmatch3))); ++ cfg->base[4] = 0; ++ cfg->base[5] = 0; ++ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) ++ cfg->header_type = PCI_HEADER_BRIDGE; ++ else ++ cfg->header_type = PCI_HEADER_NORMAL; ++ /* Save core interrupt flag */ ++ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK; ++ /* Default to MIPS shared interrupt 0 */ ++ cfg->int_line = 0; ++ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */ ++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || ++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { ++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ val = R_REG(&sb->sbipsflag); ++ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) { ++ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin) ++ break; ++ } ++ if (cfg->int_line > 4) ++ cfg->int_line = 0; + } ++ /* Emulated core */ ++ *((uint32 *) &cfg->sprom_control) = 0xffffffff; + } + -+ MFREE(buf, CBUFSIZ*CNBUFS); -+ return; ++ sb_setcoreidx(sbh, coreidx); ++ return 0; +} -+#endif -+ + ++int __init ++sbpci_init(sb_t *sbh) ++{ ++ sbpci_init_pci(sbh); ++ sbpci_init_cores(sbh); ++ return 0; ++} + -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c 2005-08-28 11:12:20.430859152 +0200 -@@ -0,0 +1,763 @@ +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbutils.c linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c +--- linux.old/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c 2005-12-15 17:31:12.211645500 +0100 +@@ -0,0 +1,2407 @@ +/* -+ * Generic Broadcom Home Networking Division (HND) DMA module. -+ * This supports the following chips: BCM42xx, 44xx, 47xx . ++ * Misc utility routines for accessing chip-specific features ++ * of the SiliconBackplane-based Broadcom chips. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ ++ * $Id$ + */ + +#include +#include -+#include ++#include +#include -+ -+struct dma_info; /* forward declaration */ -+#define di_t struct dma_info -+#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + +/* debug/trace */ -+#define DMA_ERROR(args) -+#define DMA_TRACE(args) -+ -+/* default dma message level(if input msg_level pointer is null in dma_attach()) */ -+static uint dma_msg_level = 0; -+ -+#define MAXNAMEL 8 -+#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t)) -+ -+/* dma engine software state */ -+typedef struct dma_info { -+ hnddma_t hnddma; /* exported structure */ -+ uint *msg_level; /* message level pointer */ -+ -+ char name[MAXNAMEL]; /* callers name for diag msgs */ -+ void *drv; /* driver handle */ -+ void *dev; /* device handle */ -+ dmaregs_t *regs; /* dma engine registers */ -+ -+ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */ -+ uint txin; /* index of next descriptor to reclaim */ -+ uint txout; /* index of next descriptor to post */ -+ uint txavail; /* # free tx descriptors */ -+ void *txp[MAXDD]; /* parallel array of pointers to packets */ -+ ulong txdpa; /* physical address of descriptor ring */ -+ uint txdalign; /* #bytes added to alloc'd mem to align txd */ -+ -+ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */ -+ uint rxin; /* index of next descriptor to reclaim */ -+ uint rxout; /* index of next descriptor to post */ -+ void *rxp[MAXDD]; /* parallel array of pointers to packets */ -+ ulong rxdpa; /* physical address of descriptor ring */ -+ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */ -+ -+ /* tunables */ -+ uint ntxd; /* # tx descriptors */ -+ uint nrxd; /* # rx descriptors */ -+ uint rxbufsize; /* rx buffer size in bytes */ -+ uint nrxpost; /* # rx buffers to keep posted */ -+ uint rxoffset; /* rxcontrol offset */ -+ uint ddoffset; /* add to get dma address of descriptor ring */ -+ uint dataoffset; /* add to get dma address of data buffer */ -+} dma_info_t; -+ -+/* descriptor bumping macros */ -+#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1)) -+#define PREVTXD(i) ((i - 1) & (di->ntxd - 1)) -+#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1)) -+#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1)) -+#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1)) -+ -+/* macros to convert between byte offsets and indexes */ -+#define B2I(bytes) ((bytes) / sizeof (dmadd_t)) -+#define I2B(index) ((index) * sizeof (dmadd_t)) ++#define SB_ERROR(args) + -+void* -+dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd, -+ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level) -+{ -+ dma_info_t *di; -+ void *va; + -+ ASSERT(ntxd <= MAXDD); -+ ASSERT(nrxd <= MAXDD); ++typedef uint32 (*sb_intrsoff_t)(void *intr_arg); ++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); ++typedef bool (*sb_intrsenabled_t)(void *intr_arg); + -+ /* allocate private info structure */ -+ if ((di = MALLOC(sizeof (dma_info_t))) == NULL) -+ return (NULL); -+ bzero((char*)di, sizeof (dma_info_t)); ++/* misc sb info needed by some of the routines */ ++typedef struct sb_info { + -+ /* set message level */ -+ di->msg_level = msg_level ? msg_level : &dma_msg_level; ++ struct sb_pub sb; /* back plane public state(must be first field of sb_info */ + -+ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset)); ++ void *osh; /* osl os handle */ ++ void *sdh; /* bcmsdh handle */ + -+ /* make a private copy of our callers name */ -+ strncpy(di->name, name, MAXNAMEL); -+ di->name[MAXNAMEL-1] = '\0'; ++ void *curmap; /* current regs va */ ++ void *regs[SB_MAXCORES]; /* other regs va */ + -+ di->drv = drv; -+ di->dev = dev; -+ di->regs = regs; ++ uint curidx; /* current core index */ ++ uint dev_coreid; /* the core provides driver functions */ + -+ /* allocate transmit descriptor ring */ -+ if (ntxd) { -+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL) -+ goto fail; -+ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); -+ di->txdalign = ((uint)di->txd - (uint)va); -+ di->txdpa = di->txdpa + di->txdalign; -+ ASSERT(ISALIGNED(di->txd, DMARINGALIGN)); -+ } ++ uint gpioidx; /* gpio control core index */ ++ uint gpioid; /* gpio control coretype */ + -+ /* allocate receive descriptor ring */ -+ if (nrxd) { -+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL) -+ goto fail; -+ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); -+ di->rxdalign = ((uint)di->rxd - (uint)va); -+ di->rxdpa = di->rxdpa + di->rxdalign; -+ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN)); -+ } -+ -+ /* save tunables */ -+ di->ntxd = ntxd; -+ di->nrxd = nrxd; -+ di->rxbufsize = rxbufsize; -+ di->nrxpost = nrxpost; -+ di->rxoffset = rxoffset; -+ di->ddoffset = ddoffset; -+ di->dataoffset = dataoffset; ++ uint numcores; /* # discovered cores */ ++ uint coreid[SB_MAXCORES]; /* id of each core */ + -+ return ((void*)di); ++ void *intr_arg; /* interrupt callback function arg */ ++ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ ++ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ ++ sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */ + -+fail: -+ dma_detach((void*)di); -+ return (NULL); -+} ++} sb_info_t; + -+/* may be called with core in reset */ -+void -+dma_detach(dma_info_t *di) -+{ -+ if (di == NULL) -+ return; ++/* local prototypes */ ++static sb_info_t * BCMINIT(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, int *varsz); ++static void BCMINIT(sb_scan)(sb_info_t *si); ++static uint sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val); ++static uint _sb_coreidx(sb_info_t *si); ++static uint sb_findcoreidx(sb_info_t *si, uint coreid, uint coreunit); ++static uint BCMINIT(sb_pcidev2chip)(uint pcidev); ++static uint BCMINIT(sb_chip2numcores)(uint chip); ++static int sb_pci_fixcfg(sb_info_t *si); + -+ DMA_TRACE(("%s: dma_detach\n", di->name)); ++/* delay needed between the mdio control/ mdiodata register data access */ ++#define PR28829_DELAY() OSL_DELAY(10) + -+ /* shouldn't be here if descriptors are unreclaimed */ -+ ASSERT(di->txin == di->txout); -+ ASSERT(di->rxin == di->rxout); + -+ /* free dma descriptor rings */ -+ if (di->txd) -+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa); -+ if (di->rxd) -+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa); ++/* global variable to indicate reservation/release of gpio's*/ ++static uint32 sb_gpioreservation = 0; + -+ /* free our private info structure */ -+ MFREE((void*)di, sizeof (dma_info_t)); -+} ++#define SB_INFO(sbh) (sb_info_t*)sbh ++#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) ++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE)) ++#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE)) ++#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF) ++#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) ++#define BADIDX (SB_MAXCORES+1) ++#define NOREV -1 + ++#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI)) + -+void -+dma_txreset(dma_info_t *di) -+{ -+ uint32 status; ++/* sonicsrev */ ++#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT) ++#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT) + -+ DMA_TRACE(("%s: dma_txreset\n", di->name)); ++#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) ++#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) ++#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) ++#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) + -+ /* suspend tx DMA first */ -+ W_REG(&di->regs->xmtcontrol, XC_SE); -+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED && -+ status != XS_XS_IDLE && -+ status != XS_XS_STOPPED, -+ 10000); ++/* ++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ ++ * after core switching to avoid invalid register accesss inside ISR. ++ */ ++#define INTR_OFF(si, intr_val) \ ++ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ ++ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } ++#define INTR_RESTORE(si, intr_val) \ ++ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ ++ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } + -+ W_REG(&di->regs->xmtcontrol, 0); -+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED, -+ 10000); ++/* dynamic clock control defines */ ++#define LPOMINFREQ 25000 /* low power oscillator min */ ++#define LPOMAXFREQ 43000 /* low power oscillator max */ ++#define XTALMINFREQ 19800000 /* 20 MHz - 1% */ ++#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */ ++#define PCIMINFREQ 25000000 /* 25 MHz */ ++#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */ + -+ if (status != XS_XS_DISABLED) { -+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); -+ } ++#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ ++#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ + -+ /* wait for the last transaction to complete */ -+ OSL_DELAY(300); -+} ++#define MIN_DUMPBUFLEN 32 /* debug */ + -+void -+dma_rxreset(dma_info_t *di) -+{ -+ uint32 status; ++/* GPIO Based LED powersave defines */ ++#define DEFAULT_GPIO_ONTIME 10 ++#define DEFAULT_GPIO_OFFTIME 90 + -+ DMA_TRACE(("%s: dma_rxreset\n", di->name)); ++#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) + -+ W_REG(&di->regs->rcvcontrol, 0); -+ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED, -+ 10000); ++static uint32 ++sb_read_sbreg(sb_info_t *si, volatile uint32 *sbr) ++{ ++ uint32 val = R_REG(sbr); + -+ if (status != RS_RS_DISABLED) { -+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); -+ } ++ return (val); +} + -+void -+dma_txinit(dma_info_t *di) ++static void ++sb_write_sbreg(sb_info_t *si, volatile uint32 *sbr, uint32 v) +{ -+ DMA_TRACE(("%s: dma_txinit\n", di->name)); -+ -+ di->txin = di->txout = 0; -+ di->txavail = di->ntxd - 1; -+ -+ /* clear tx descriptor ring */ -+ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t))); -+ -+ W_REG(&di->regs->xmtcontrol, XC_XE); -+ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset)); ++ W_REG(sbr, v); +} + -+bool -+dma_txenabled(dma_info_t *di) -+{ -+ uint32 xc; ++/* Using sb_kattach depends on SB_BUS support, either implicit */ ++/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */ ++#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS) + -+ /* If the chip is dead, it is not enabled :-) */ -+ xc = R_REG(&di->regs->xmtcontrol); -+ return ((xc != 0xffffffff) && (xc & XC_XE)); -+} ++/* global kernel resource */ ++static sb_info_t ksi; + -+void -+dma_txsuspend(dma_info_t *di) ++/* generic kernel variant of sb_attach() */ ++sb_t * ++BCMINITFN(sb_kattach)() +{ -+ DMA_TRACE(("%s: dma_txsuspend\n", di->name)); -+ OR_REG(&di->regs->xmtcontrol, XC_SE); -+} ++ uint32 *regs; + -+void -+dma_txresume(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_txresume\n", di->name)); -+ AND_REG(&di->regs->xmtcontrol, ~XC_SE); -+} ++ if (ksi.curmap == NULL) { ++ uint32 cid; + -+bool -+dma_txsuspended(dma_info_t *di) -+{ -+ uint32 xc; -+ uint32 xs; ++ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); ++ cid = R_REG((uint32 *)regs); ++ if (((cid & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) && ++ ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) { ++ uint32 *scc, val; ++ ++ scc = (uint32 *)((uchar*)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); ++ val = R_REG(scc); ++ SB_ERROR((" initial scc = 0x%x\n", val)); ++ val |= SCC_SS_XTAL; ++ W_REG(scc, val); ++ } + -+ xc = R_REG(&di->regs->xmtcontrol); -+ if (xc & XC_SE) { -+ xs = R_REG(&di->regs->xmtstatus); -+ return ((xs & XS_XS_MASK) == XS_XS_IDLE); ++ if (BCMINIT(sb_doattach)(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, ++ SB_BUS, NULL, NULL, NULL) == NULL) { ++ return NULL; ++ } + } -+ return 0; -+} + -+bool -+dma_txstopped(dma_info_t *di) -+{ -+ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED); ++ return (sb_t *)&ksi; +} ++#endif + -+bool -+dma_rxstopped(dma_info_t *di) ++static sb_info_t * ++BCMINITFN(sb_doattach)(sb_info_t *si, uint devid, osl_t *osh, void *regs, ++ uint bustype, void *sdh, char **vars, int *varsz) +{ -+ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED); -+} ++ uint origidx; ++ chipcregs_t *cc; ++ sbconfig_t *sb; ++ uint32 w; + -+void -+dma_fifoloopbackenable(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name)); -+ OR_REG(&di->regs->xmtcontrol, XC_LE); -+} ++ ASSERT(GOODREGS(regs)); + -+void -+dma_rxinit(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_rxinit\n", di->name)); ++ bzero((uchar*)si, sizeof (sb_info_t)); + -+ di->rxin = di->rxout = 0; ++ si->sb.buscoreidx = si->gpioidx = BADIDX; + -+ /* clear rx descriptor ring */ -+ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t))); ++ si->osh = osh; ++ si->curmap = regs; ++ si->sdh = sdh; + -+ dma_rxenable(di); -+ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset)); -+} ++ /* check to see if we are a sb core mimic'ing a pci core */ ++ if (bustype == PCI_BUS) { ++ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) ++ bustype = SB_BUS; ++ else ++ bustype = PCI_BUS; ++ } + -+void -+dma_rxenable(dma_info_t *di) -+{ -+ DMA_TRACE(("%s: dma_rxenable\n", di->name)); -+ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE)); -+} ++ si->sb.bustype = bustype; ++ if (si->sb.bustype != BUSTYPE(si->sb.bustype)) { ++ SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n", ++ si->sb.bustype, BUSTYPE(si->sb.bustype))); ++ return NULL; ++ } + -+bool -+dma_rxenabled(dma_info_t *di) -+{ -+ uint32 rc; ++ /* kludge to enable the clock on the 4306 which lacks a slowclock */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) ++ sb_clkctl_xtal(&si->sb, XTAL|PLL, ON); + -+ rc = R_REG(&di->regs->rcvcontrol); -+ return ((rc != 0xffffffff) && (rc & RC_RE)); -+} ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_BAR0_WIN, sizeof (uint32)); ++ if (!GOODCOREADDR(w)) ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32), SB_ENUM_BASE); ++ } + -+/* -+ * The BCM47XX family supports full 32bit dma engine buffer addressing so -+ * dma buffers can cross 4 Kbyte page boundaries. -+ */ -+int -+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags) -+{ -+ void *p, *next; -+ uchar *data; -+ uint len; -+ uint txout; -+ uint32 ctrl; -+ uint32 pa; ++ /* initialize current core index value */ ++ si->curidx = _sb_coreidx(si); + -+ DMA_TRACE(("%s: dma_txfast\n", di->name)); ++ if (si->curidx == BADIDX) { ++ SB_ERROR(("sb_doattach: bad core index\n")); ++ return NULL; ++ } + -+ txout = di->txout; -+ ctrl = 0; ++ /* get sonics backplane revision */ ++ sb = REGS2SB(si->curmap); ++ si->sb.sonicsrev = (R_SBREG(si, &(sb)->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT; + -+ /* -+ * Walk the chain of packet buffers -+ * allocating and initializing transmit descriptor entries. -+ */ -+ for (p = p0; p; p = next) { -+ data = PKTDATA(di->drv, p); -+ len = PKTLEN(di->drv, p); -+ next = PKTNEXT(di->drv, p); ++ /* keep and reuse the initial register mapping */ ++ origidx = si->curidx; ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) ++ si->regs[origidx] = regs; + -+ /* return nonzero if out of tx descriptors */ -+ if (NEXTTXD(txout) == di->txin) -+ goto outoftxd; ++ /* is core-0 a chipcommon core? */ ++ si->numcores = 1; ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, 0); ++ if (sb_coreid(&si->sb) != SB_CC) ++ cc = NULL; + -+ if (len == 0) -+ continue; ++ /* determine chip id and rev */ ++ if (cc) { ++ /* chip common core found! */ ++ si->sb.chip = R_REG(&cc->chipid) & CID_ID_MASK; ++ si->sb.chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; ++ si->sb.chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; ++ } else { ++ /* no chip common core -- must convert device id to chip id */ ++ if ((si->sb.chip = BCMINIT(sb_pcidev2chip)(devid)) == 0) { ++ SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid)); ++ sb_setcoreidx(&si->sb, origidx); ++ return NULL; ++ } ++ } + -+ /* get physical address of buffer start */ -+ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p); ++ /* get chipcommon rev */ ++ si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV; + -+ /* build the descriptor control value */ -+ ctrl = len & CTRL_BC_MASK; ++ /* determine numcores */ ++ if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6))) ++ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; ++ else ++ si->numcores = BCMINIT(sb_chip2numcores)(si->sb.chip); + -+ ctrl |= coreflags; -+ -+ if (p == p0) -+ ctrl |= CTRL_SOF; -+ if (next == NULL) -+ ctrl |= (CTRL_IOC | CTRL_EOF); -+ if (txout == (di->ntxd - 1)) -+ ctrl |= CTRL_EOT; ++ /* return to original core */ ++ sb_setcoreidx(&si->sb, origidx); + -+ /* init the tx descriptor */ -+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); -+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ /* sanity checks */ ++ ASSERT(si->sb.chip); + -+ ASSERT(di->txp[txout] == NULL); ++ /* scan for cores */ ++ BCMINIT(sb_scan)(si); + -+ txout = NEXTTXD(txout); ++ /* fixup necessary chip/core configurations */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ if (sb_pci_fixcfg(si)) { ++ SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n")); ++ return NULL; ++ } ++ } ++ ++ /* srom_var_init() depends on sb_scan() info */ ++ if (srom_var_init(si, si->sb.bustype, si->curmap, osh, vars, varsz)) { ++ SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n")); ++ return (NULL); ++ } ++ ++ if (cc == NULL) { ++ /* ++ * The chip revision number is hardwired into all ++ * of the pci function config rev fields and is ++ * independent from the individual core revision numbers. ++ * For example, the "A0" silicon of each chip is chip rev 0. ++ */ ++ if (BUSTYPE(si->sb.bustype) == PCI_BUS) { ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); ++ si->sb.chiprev = w & 0xff; ++ } else ++ si->sb.chiprev = 0; + } + -+ /* if last txd eof not set, fix it */ -+ if (!(ctrl & CTRL_EOF)) -+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); ++ /* gpio control core is required */ ++ if (!GOODIDX(si->gpioidx)) { ++ SB_ERROR(("sb_doattach: gpio control core not found\n")); ++ return NULL; ++ } + -+ /* save the packet */ -+ di->txp[PREVTXD(txout)] = p0; ++ /* get boardtype and boardrev */ ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ /* do a pci config read to get subsystem id and subvendor id */ ++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); ++ si->sb.boardvendor = w & 0xffff; ++ si->sb.boardtype = (w >> 16) & 0xffff; ++ break; + -+ /* bump the tx descriptor index */ -+ di->txout = txout; ++ case SB_BUS: ++ case JTAG_BUS: ++ si->sb.boardvendor = VENDOR_BROADCOM; ++ if ((si->sb.boardtype = getintvar(NULL, "boardtype")) == 0) ++ si->sb.boardtype = 0xffff; ++ break; ++ } + -+ /* kick the chip */ -+ W_REG(&di->regs->xmtptr, I2B(txout)); ++ if (si->sb.boardtype == 0) { ++ SB_ERROR(("sb_doattach: unknown board type\n")); ++ ASSERT(si->sb.boardtype); ++ } + -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; ++ /* setup the GPIO based LED powersave register */ ++ if (si->sb.ccrev >= 16) { ++ w = getintvar(*vars, "gpiotimerval"); ++ if (!w) ++ w = DEFAULT_GPIOTIMERVAL; ++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), ~0, w); ++ } + -+ return (0); + -+outoftxd: -+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); -+ PKTFREE(di->drv, p0, TRUE); -+ di->txavail = 0; -+ di->hnddma.txnobuf++; -+ return (-1); ++ return (si); +} + -+#define PAGESZ 4096 -+#define PAGEBASE(x) ((uint)(x) & ~4095) -+ -+/* -+ * Just like above except go through the extra effort of splitting -+ * buffers that cross 4Kbyte boundaries into multiple tx descriptors. -+ */ -+int -+dma_tx(dma_info_t *di, void *p0, uint32 coreflags) ++uint ++sb_coreid(sb_t *sbh) +{ -+ void *p, *next; -+ uchar *data; -+ uint plen, len; -+ uchar *page, *start, *end; -+ uint txout; -+ uint32 ctrl; -+ uint32 pa; -+ -+ DMA_TRACE(("%s: dma_tx\n", di->name)); -+ -+ txout = di->txout; -+ ctrl = 0; -+ -+ /* -+ * Walk the chain of packet buffers -+ * splitting those that cross 4 Kbyte boundaries -+ * allocating and initializing transmit descriptor entries. -+ */ -+ for (p = p0; p; p = next) { -+ data = PKTDATA(di->drv, p); -+ plen = PKTLEN(di->drv, p); -+ next = PKTNEXT(di->drv, p); -+ -+ if (plen == 0) -+ continue; ++ sb_info_t *si; ++ sbconfig_t *sb; + -+ for (page = (uchar*)PAGEBASE(data); -+ page <= (uchar*)PAGEBASE(data + plen - 1); -+ page += PAGESZ) { ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); + -+ /* return nonzero if out of tx descriptors */ -+ if (NEXTTXD(txout) == di->txin) -+ goto outoftxd; ++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); ++} + -+ start = (page == (uchar*)PAGEBASE(data))? data: page; -+ end = (page == (uchar*)PAGEBASE(data + plen))? -+ (data + plen): (page + PAGESZ); -+ len = end - start; ++uint ++sb_coreidx(sb_t *sbh) ++{ ++ sb_info_t *si; + -+ /* build the descriptor control value */ -+ ctrl = len & CTRL_BC_MASK; ++ si = SB_INFO(sbh); ++ return (si->curidx); ++} + -+ ctrl |= coreflags; ++/* return current index of core */ ++static uint ++_sb_coreidx(sb_info_t *si) ++{ ++ sbconfig_t *sb; ++ uint32 sbaddr = 0; + -+ if ((p == p0) && (start == data)) -+ ctrl |= CTRL_SOF; -+ if ((next == NULL) && (end == (data + plen))) -+ ctrl |= (CTRL_IOC | CTRL_EOF); -+ if (txout == (di->ntxd - 1)) -+ ctrl |= CTRL_EOT; ++ ASSERT(si); + -+ /* get physical address of buffer start */ -+ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p); ++ switch (BUSTYPE(si->sb.bustype)) { ++ case SB_BUS: ++ sb = REGS2SB(si->curmap); ++ sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0)); ++ break; + -+ /* init the tx descriptor */ -+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); -+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ case PCI_BUS: ++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); ++ break; + -+ ASSERT(di->txp[txout] == NULL); ++#ifdef BCMJTAG ++ case JTAG_BUS: ++ sbaddr = (uint32)si->curmap; ++ break; ++#endif /* BCMJTAG */ + -+ txout = NEXTTXD(txout); -+ } ++ default: ++ ASSERT(0); + } + -+ /* if last txd eof not set, fix it */ -+ if (!(ctrl & CTRL_EOF)) -+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); -+ -+ /* save the packet */ -+ di->txp[PREVTXD(txout)] = p0; -+ -+ /* bump the tx descriptor index */ -+ di->txout = txout; -+ -+ /* kick the chip */ -+ W_REG(&di->regs->xmtptr, I2B(txout)); -+ -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+ -+ return (0); ++ if (!GOODCOREADDR(sbaddr)) ++ return BADIDX; + -+outoftxd: -+ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name)); -+ PKTFREE(di->drv, p0, TRUE); -+ di->txavail = 0; -+ di->hnddma.txnobuf++; -+ return (-1); ++ return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE); +} + -+/* returns a pointer to the next frame received, or NULL if there are no more */ -+void* -+dma_rx(dma_info_t *di) ++uint ++sb_corevendor(sb_t *sbh) +{ -+ void *p; -+ uint len; -+ int skiplen = 0; -+ -+ while ((p = dma_getnextrxp(di, FALSE))) { -+ /* skip giant packets which span multiple rx descriptors */ -+ if (skiplen > 0) { -+ skiplen -= di->rxbufsize; -+ if (skiplen < 0) -+ skiplen = 0; -+ PKTFREE(di->drv, p, FALSE); -+ continue; -+ } ++ sb_info_t *si; ++ sbconfig_t *sb; + -+ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p))); -+ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len)); ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); + -+ /* bad frame length check */ -+ if (len > (di->rxbufsize - di->rxoffset)) { -+ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len)); -+ if (len > 0) -+ skiplen = len - (di->rxbufsize - di->rxoffset); -+ PKTFREE(di->drv, p, FALSE); -+ di->hnddma.rxgiants++; -+ continue; -+ } ++ return ((R_SBREG(si, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); ++} + -+ /* set actual length */ -+ PKTSETLEN(di->drv, p, (di->rxoffset + len)); ++uint ++sb_corerev(sb_t *sbh) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint sbidh; + -+ break; -+ } ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); ++ sbidh = R_SBREG(si, &(sb)->sbidhigh); + -+ return (p); ++ return (SBCOREREV(sbidh)); +} + -+/* post receive buffers */ -+void -+dma_rxfill(dma_info_t *di) ++void * ++sb_osh(sb_t *sbh) +{ -+ void *p; -+ uint rxin, rxout; -+ uint ctrl; -+ uint n; -+ uint i; -+ uint32 pa; -+ uint rxbufsize; -+ -+ /* -+ * Determine how many receive buffers we're lacking -+ * from the full complement, allocate, initialize, -+ * and post them, then update the chip rx lastdscr. -+ */ ++ sb_info_t *si; + -+ rxin = di->rxin; -+ rxout = di->rxout; -+ rxbufsize = di->rxbufsize; ++ si = SB_INFO(sbh); ++ return si->osh; ++} + -+ n = di->nrxpost - NRXDACTIVE(rxin, rxout); ++#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) + -+ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n)); -+ -+ for (i = 0; i < n; i++) { -+ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) { -+ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name)); -+ di->hnddma.rxnobuf++; -+ break; -+ } -+ -+ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0; -+ -+ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p); -+ ASSERT(ISALIGNED(pa, 4)); -+ -+ /* save the free packet pointer */ -+ ASSERT(di->rxp[rxout] == NULL); -+ di->rxp[rxout] = p; ++/* set/clear sbtmstatelow core-specific flags */ ++uint32 ++sb_coreflags(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; + -+ /* prep the descriptor control value */ -+ ctrl = rxbufsize; -+ if (rxout == (di->nrxd - 1)) -+ ctrl |= CTRL_EOT; ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); + -+ /* init the rx descriptor */ -+ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl)); -+ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset)); ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTML_ALLOW) == 0); + -+ rxout = NEXTRXD(rxout); ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val; ++ W_SBREG(si, &sb->sbtmstatelow, w); + } + -+ di->rxout = rxout; -+ -+ /* update the chip lastdscr pointer */ -+ W_REG(&di->regs->rcvptr, I2B(rxout)); ++ /* return the new value */ ++ return (R_SBREG(si, &sb->sbtmstatelow) & SBTML_ALLOW); +} + -+void -+dma_txreclaim(dma_info_t *di, bool forceall) ++/* set/clear sbtmstatehigh core-specific flags */ ++uint32 ++sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val) +{ -+ void *p; ++ sb_info_t *si; ++ sbconfig_t *sb; ++ uint32 w; + -+ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : "")); ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); + -+ while ((p = dma_getnexttxp(di, forceall))) -+ PKTFREE(di->drv, p, TRUE); -+} ++ ASSERT((val & ~mask) == 0); ++ ASSERT((mask & ~SBTMH_FL_MASK) == 0); + -+/* -+ * Reclaim next completed txd (txds if using chained buffers) and -+ * return associated packet. -+ * If 'force' is true, reclaim txd(s) and return associated packet -+ * regardless of the value of the hardware "curr" pointer. -+ */ -+void* -+dma_getnexttxp(dma_info_t *di, bool forceall) -+{ -+ uint start, end, i; -+ void *txp; ++ /* mask and set */ ++ if (mask || val) { ++ w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val; ++ W_SBREG(si, &sb->sbtmstatehigh, w); ++ } + -+ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); ++ /* return the new value */ ++ return (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_FL_MASK); ++} + -+ txp = NULL; ++/* caller needs to take care of core-specific bist hazards */ ++int ++sb_corebist(sb_t *sbh, uint coreid, uint coreunit) ++{ ++ uint32 sblo; ++ uint coreidx; ++ sb_info_t *si; ++ int result = 0; + -+ start = di->txin; -+ if (forceall) -+ end = di->txout; -+ else -+ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); ++ si = SB_INFO(sbh); + -+ if ((start == 0) && (end > di->txout)) -+ goto bogus; ++ coreidx = sb_findcoreidx(si, coreid, coreunit); ++ if (!GOODIDX(coreidx)) ++ result = BCME_ERROR; ++ else { ++ sblo = sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), 0, 0); ++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, (sblo | SBTML_FGC | SBTML_BE)); ++ ++ SPINWAIT(((sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTD) == 0), 100000); ++ ++ if (sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatehigh), 0, 0) & SBTMH_BISTF) ++ result = BCME_ERROR; + -+ for (i = start; i != end && !txp; i = NEXTTXD(i)) { -+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset), -+ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]); -+ W_SM(&di->txd[i].addr, 0xdeadbeef); -+ txp = di->txp[i]; -+ di->txp[i] = NULL; ++ sb_corereg(si, coreidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbtmstatelow), ~0, sblo); + } + -+ di->txin = i; -+ -+ /* tx flow control */ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+ -+ return (txp); -+ -+bogus: -+/* -+ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", -+ start, end, di->txout, forceall)); -+*/ -+ return (NULL); ++ return result; +} + -+void -+dma_rxreclaim(dma_info_t *di) ++bool ++sb_iscoreup(sb_t *sbh) +{ -+ void *p; ++ sb_info_t *si; ++ sbconfig_t *sb; + -+ DMA_TRACE(("%s: dma_rxreclaim\n", di->name)); ++ si = SB_INFO(sbh); ++ sb = REGS2SB(si->curmap); + -+ while ((p = dma_getnextrxp(di, TRUE))) -+ PKTFREE(di->drv, p, FALSE); ++ return ((R_SBREG(si, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK); +} + -+void * -+dma_getnextrxp(dma_info_t *di, bool forceall) ++/* ++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, ++ * switch back to the original core, and return the new value. ++ */ ++static uint ++sb_corereg(sb_info_t *si, uint coreidx, uint regoff, uint mask, uint val) +{ -+ uint i; -+ void *rxp; ++ uint origidx; ++ uint32 *r; ++ uint w; ++ uint intr_val = 0; + -+ /* if forcing, dma engine must be disabled */ -+ ASSERT(!forceall || !dma_rxenabled(di)); ++ ASSERT(GOODIDX(coreidx)); ++ ASSERT(regoff < SB_CORE_SIZE); ++ ASSERT((val & ~mask) == 0); + -+ i = di->rxin; ++ INTR_OFF(si, intr_val); + -+ /* return if no packets posted */ -+ if (i == di->rxout) -+ return (NULL); ++ /* save current core index */ ++ origidx = sb_coreidx(&si->sb); + -+ /* ignore curr if forceall */ -+ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK))) -+ return (NULL); ++ /* switch core */ ++ r = (uint32*) ((uchar*) sb_setcoreidx(&si->sb, coreidx) + regoff); + -+ /* get the packet pointer that corresponds to the rx descriptor */ -+ rxp = di->rxp[i]; -+ ASSERT(rxp); -+ di->rxp[i] = NULL; ++ /* mask and set */ ++ if (mask || val) { ++ if (regoff >= SBCONFIGOFF) { ++ w = (R_SBREG(si, r) & ~mask) | val; ++ W_SBREG(si, r, w); ++ } else { ++ w = (R_REG(r) & ~mask) | val; ++ W_REG(r, w); ++ } ++ } + -+ /* clear this packet from the descriptor ring */ -+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset), -+ di->rxbufsize, DMA_RX, rxp); -+ W_SM(&di->rxd[i].addr, 0xdeadbeef); ++ /* readback */ ++ if (regoff >= SBCONFIGOFF) ++ w = R_SBREG(si, r); ++ else ++ w = R_REG(r); + -+ di->rxin = NEXTRXD(i); ++ /* restore core index */ ++ if (origidx != coreidx) ++ sb_setcoreidx(&si->sb, origidx); + -+ return (rxp); ++ INTR_RESTORE(si, intr_val); ++ return (w); +} + -+char* -+dma_dumptx(dma_info_t *di, char *buf) -+{ -+ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n", -+ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail); -+ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n", -+ R_REG(&di->regs->xmtcontrol), -+ R_REG(&di->regs->xmtaddr), -+ R_REG(&di->regs->xmtptr), -+ R_REG(&di->regs->xmtstatus)); -+ return (buf); -+} ++#define DWORD_ALIGN(x) (x & ~(0x03)) ++#define BYTE_POS(x) (x & 0x3) ++#define WORD_POS(x) (x & 0x1) + -+char* -+dma_dumprx(dma_info_t *di, char *buf) -+{ -+ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n", -+ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout); -+ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n", -+ R_REG(&di->regs->rcvcontrol), -+ R_REG(&di->regs->rcvaddr), -+ R_REG(&di->regs->rcvptr), -+ R_REG(&di->regs->rcvstatus)); -+ return (buf); -+} ++#define BYTE_SHIFT(x) (8 * BYTE_POS(x)) ++#define WORD_SHIFT(x) (16 * WORD_POS(x)) + -+char* -+dma_dump(dma_info_t *di, char *buf) -+{ -+ buf = dma_dumptx(di, buf); -+ buf = dma_dumprx(di, buf); -+ return (buf); -+} ++#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF) ++#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF) + -+uint -+dma_getvar(dma_info_t *di, char *name) -+{ -+ if (!strcmp(name, "&txavail")) -+ return ((uint) &di->txavail); -+ else { -+ ASSERT(0); -+ } -+ return (0); -+} ++#define read_pci_cfg_byte(a) \ ++ (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff) + -+void -+dma_txblock(dma_info_t *di) -+{ -+ di->txavail = 0; -+} ++#define read_pci_cfg_write(a) \ ++ (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff) + -+void -+dma_txunblock(dma_info_t *di) -+{ -+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; -+} + -+uint -+dma_txactive(dma_info_t *di) ++/* scan the sb enumerated space to identify all cores */ ++static void ++BCMINITFN(sb_scan)(sb_info_t *si) +{ -+ return (NTXDACTIVE(di->txin, di->txout)); -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200 -@@ -0,0 +1,420 @@ -+/* -+ * Linux OS Independent Layer -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $ -+ */ -+ -+#define LINUX_OSL -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#ifdef mips -+#include -+#endif -+#include ++ uint origidx; ++ uint i; ++ bool pci; ++ uint pciidx; ++ uint pcirev; + -+#define PCI_CFG_RETRY 10 + -+void* -+osl_pktget(void *drv, uint len, bool send) -+{ -+ struct sk_buff *skb; + -+ if ((skb = dev_alloc_skb(len)) == NULL) -+ return (NULL); ++ /* numcores should already be set */ ++ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); + -+ skb_put(skb, len); ++ /* save current core index */ ++ origidx = sb_coreidx(&si->sb); + -+ /* ensure the cookie field is cleared */ -+ PKTSETCOOKIE(skb, NULL); ++ si->sb.buscorerev = NOREV; ++ si->sb.buscoreidx = BADIDX; + -+ return ((void*) skb); -+} ++ si->gpioidx = BADIDX; + -+void -+osl_pktfree(void *p) -+{ -+ struct sk_buff *skb, *nskb; ++ pci = FALSE; ++ pcirev = NOREV; ++ pciidx = BADIDX; + -+ skb = (struct sk_buff*) p; ++ for (i = 0; i < si->numcores; i++) { ++ sb_setcoreidx(&si->sb, i); ++ si->coreid[i] = sb_coreid(&si->sb); + -+ /* perversion: we use skb->next to chain multi-skb packets */ -+ while (skb) { -+ nskb = skb->next; -+ skb->next = NULL; -+ if (skb->destructor) { -+ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */ -+ dev_kfree_skb_any(skb); -+ } else { -+ /* can free immediately (even in_irq()) if destructor does not exist */ -+ dev_kfree_skb(skb); ++ if (si->coreid[i] == SB_PCI) { ++ pciidx = i; ++ pcirev = sb_corerev(&si->sb); ++ pci = TRUE; + } -+ skb = nskb; + } -+} -+ -+uint32 -+osl_pci_read_config(void *loc, uint offset, uint size) -+{ -+ struct pci_dev *pdev; -+ uint val; -+ uint retry=PCI_CFG_RETRY; -+ -+ /* only 4byte access supported */ -+ ASSERT(size == 4); -+ -+ pdev = (struct pci_dev*)loc; -+ do { -+ pci_read_config_dword(pdev, offset, &val); -+ if (val != 0xffffffff) -+ break; -+ } while (retry--); ++ if (pci) { ++ si->sb.buscoretype = SB_PCI; ++ si->sb.buscorerev = pcirev; ++ si->sb.buscoreidx = pciidx; ++ } + ++ /* ++ * Find the gpio "controlling core" type and index. ++ * Precedence: ++ * - if there's a chip common core - use that ++ * - else if there's a pci core (rev >= 2) - use that ++ * - else there had better be an extif core (4710 only) ++ */ ++ if (GOODIDX(sb_findcoreidx(si, SB_CC, 0))) { ++ si->gpioidx = sb_findcoreidx(si, SB_CC, 0); ++ si->gpioid = SB_CC; ++ } else if (PCI(si) && (si->sb.buscorerev >= 2)) { ++ si->gpioidx = si->sb.buscoreidx; ++ si->gpioid = SB_PCI; ++ } else if (sb_findcoreidx(si, SB_EXTIF, 0)) { ++ si->gpioidx = sb_findcoreidx(si, SB_EXTIF, 0); ++ si->gpioid = SB_EXTIF; ++ } else ++ ASSERT(si->gpioidx != BADIDX); + -+ return (val); ++ /* return to original core index */ ++ sb_setcoreidx(&si->sb, origidx); +} + ++/* may be called with core in reset */ +void -+osl_pci_write_config(void *loc, uint offset, uint size, uint val) ++sb_detach(sb_t *sbh) +{ -+ struct pci_dev *pdev; -+ uint retry=PCI_CFG_RETRY; ++ sb_info_t *si; ++ uint idx; + -+ /* only 4byte access supported */ -+ ASSERT(size == 4); ++ si = SB_INFO(sbh); + -+ pdev = (struct pci_dev*)loc; ++ if (si == NULL) ++ return; + -+ do { -+ pci_write_config_dword(pdev, offset, val); -+ if (offset!=PCI_BAR0_WIN) -+ break; -+ if (osl_pci_read_config(loc,offset,size) == val) -+ break; -+ } while (retry--); ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) ++ for (idx = 0; idx < SB_MAXCORES; idx++) ++ if (si->regs[idx]) { ++ REG_UNMAP(si->regs[idx]); ++ si->regs[idx] = NULL; ++ } + ++ if (si != &ksi) ++ MFREE(si->osh, si, sizeof (sb_info_t)); +} + -+void -+osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size) ++/* use pci dev id to determine chip id for chips not having a chipcommon core */ ++static uint ++BCMINITFN(sb_pcidev2chip)(uint pcidev) +{ -+ ASSERT(0); ++ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) ++ return (BCM4710_DEVICE_ID); ++ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) ++ return (BCM4402_DEVICE_ID); ++ if (pcidev == BCM4401_ENET_ID) ++ return (BCM4402_DEVICE_ID); ++ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) ++ return (BCM4307_DEVICE_ID); ++ if (pcidev == BCM4301_DEVICE_ID) ++ return (BCM4301_DEVICE_ID); ++ ++ return (0); +} + -+void -+osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size) ++/* convert chip number to number of i/o cores */ ++static uint ++BCMINITFN(sb_chip2numcores)(uint chip) +{ ++ if (chip == BCM4710_DEVICE_ID) ++ return (9); ++ if (chip == BCM4402_DEVICE_ID) ++ return (3); ++ if ((chip == BCM4301_DEVICE_ID) || (chip == BCM4307_DEVICE_ID)) ++ return (5); ++ if (chip == BCM4306_DEVICE_ID) /* < 4306c0 */ ++ return (6); ++ if (chip == BCM4704_DEVICE_ID) ++ return (9); ++ if (chip == BCM5365_DEVICE_ID) ++ return (7); ++ ++ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); + ASSERT(0); ++ return (1); +} + -+void -+osl_assert(char *exp, char *file, int line) ++/* return index of coreid or BADIDX if not found */ ++static uint ++sb_findcoreidx( sb_info_t *si, uint coreid, uint coreunit) +{ -+ char tempbuf[255]; ++ uint found; ++ uint i; ++ ++ found = 0; ++ ++ for (i = 0; i < si->numcores; i++) ++ if (si->coreid[i] == coreid) { ++ if (found == coreunit) ++ return (i); ++ found++; ++ } + -+ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line); -+ panic(tempbuf); ++ return (BADIDX); +} + -+/* -+ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++/* ++ * this function changes logical "focus" to the indiciated core, ++ * must be called with interrupt off. ++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ -+#ifdef BINOSL -+ -+int -+osl_printf(const char *format, ...) ++void* ++sb_setcoreidx(sb_t *sbh, uint coreidx) +{ -+ va_list args; -+ char buf[1024]; -+ int len; ++ sb_info_t *si; ++ uint32 sbaddr; + -+ /* sprintf into a local buffer because there *is* no "vprintk()".. */ -+ va_start(args, format); -+ len = vsprintf(buf, format, args); -+ va_end(args); ++ si = SB_INFO(sbh); + -+ if (len > sizeof (buf)) { -+ printk("osl_printf: buffer overrun\n"); -+ return (0); -+ } ++ if (coreidx >= si->numcores) ++ return (NULL); ++ ++ /* ++ * If the user has provided an interrupt mask enabled function, ++ * then assert interrupts are disabled before switching the core. ++ */ ++ ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg)); + -+ return (printk(buf)); -+} ++ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); + -+int -+osl_sprintf(char *buf, const char *format, ...) -+{ -+ va_list args; -+ int rc; ++ switch (BUSTYPE(si->sb.bustype)) { ++ case SB_BUS: ++ /* map new one */ ++ if (!si->regs[coreidx]) { ++ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); ++ ASSERT(GOODREGS(si->regs[coreidx])); ++ } ++ si->curmap = si->regs[coreidx]; ++ break; + -+ va_start(args, format); -+ rc = vsprintf(buf, format, args); -+ va_end(args); -+ return (rc); -+} ++ case PCI_BUS: ++ /* point bar0 window */ ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); ++ break; + -+int -+osl_strcmp(const char *s1, const char *s2) -+{ -+ return (strcmp(s1, s2)); -+} ++#ifdef BCMJTAG ++ case JTAG_BUS: ++ /* map new one */ ++ if (!si->regs[coreidx]) { ++ si->regs[coreidx] = (void *)sbaddr; ++ ASSERT(GOODREGS(si->regs[coreidx])); ++ } ++ si->curmap = si->regs[coreidx]; ++ break; ++#endif /* BCMJTAG */ ++ } + -+int -+osl_strncmp(const char *s1, const char *s2, uint n) -+{ -+ return (strncmp(s1, s2, n)); -+} ++ si->curidx = coreidx; + -+int -+osl_strlen(char *s) -+{ -+ return (strlen(s)); ++ return (si->curmap); +} + -+char* -+osl_strcpy(char *d, const char *s) ++/* ++ * this function changes logical "focus" to the indiciated core, ++ * must be called with interrupt off. ++ * Moreover, callers should keep interrupts off during switching out of and back to d11 core ++ */ ++void* ++sb_setcore(sb_t *sbh, uint coreid, uint coreunit) +{ -+ return (strcpy(d, s)); -+} ++ sb_info_t *si; ++ uint idx; + -+char* -+osl_strncpy(char *d, const char *s, uint n) -+{ -+ return (strncpy(d, s, n)); -+} ++ si = SB_INFO(sbh); ++ idx = sb_findcoreidx(si, coreid, coreunit); ++ if (!GOODIDX(idx)) ++ return (NULL); + -+void -+bcopy(const void *src, void *dst, int len) -+{ -+ memcpy(dst, src, len); ++ return (sb_setcoreidx(sbh, idx)); +} + -+int -+bcmp(const void *b1, const void *b2, int len) ++/* return chip number */ ++uint ++BCMINITFN(sb_chip)(sb_t *sbh) +{ -+ return (memcmp(b1, b2, len)); -+} ++ sb_info_t *si; + -+void -+bzero(void *b, int len) -+{ -+ memset(b, '\0', len); ++ si = SB_INFO(sbh); ++ return (si->sb.chip); +} + -+void* -+osl_malloc(uint size) ++/* return chip revision number */ ++uint ++BCMINITFN(sb_chiprev)(sb_t *sbh) +{ -+ return (kmalloc(size, GFP_ATOMIC)); -+} ++ sb_info_t *si; + -+void -+osl_mfree(void *addr, uint size) -+{ -+ kfree(addr); ++ si = SB_INFO(sbh); ++ return (si->sb.chiprev); +} + -+uint32 -+osl_readl(volatile uint32 *r) ++/* return chip common revision number */ ++uint ++BCMINITFN(sb_chipcrev)(sb_t *sbh) +{ -+ return (readl(r)); -+} ++ sb_info_t *si; + -+uint16 -+osl_readw(volatile uint16 *r) -+{ -+ return (readw(r)); ++ si = SB_INFO(sbh); ++ return (si->sb.ccrev); +} + -+uint8 -+osl_readb(volatile uint8 *r) ++/* return chip package option */ ++uint ++BCMINITFN(sb_chippkg)(sb_t *sbh) +{ -+ return (readb(r)); -+} ++ sb_info_t *si; + -+void -+osl_writel(uint32 v, volatile uint32 *r) -+{ -+ writel(v, r); ++ si = SB_INFO(sbh); ++ return (si->sb.chippkg); +} + -+void -+osl_writew(uint16 v, volatile uint16 *r) ++/* return PCI core rev. */ ++uint ++BCMINITFN(sb_pcirev)(sb_t *sbh) +{ -+ writew(v, r); -+} ++ sb_info_t *si; + -+void -+osl_writeb(uint8 v, volatile uint8 *r) -+{ -+ writeb(v, r); ++ si = SB_INFO(sbh); ++ return (si->sb.buscorerev); +} + -+void * -+osl_uncached(void *va) ++bool ++BCMINITFN(sb_war16165)(sb_t *sbh) +{ -+#ifdef mips -+ return ((void*)KSEG1ADDR(va)); -+#else -+ return ((void*)va); -+#endif ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ++ return (PCI(si) && (si->sb.buscorerev <= 10)); +} + ++/* return board vendor id */ +uint -+osl_getcycles(void) ++BCMINITFN(sb_boardvendor)(sb_t *sbh) +{ -+ uint cycles; ++ sb_info_t *si; + -+#if defined(mips) -+ cycles = read_c0_count() * 2; -+#elif defined(__i386__) -+ rdtscl(cycles); -+#else -+ cycles = 0; -+#endif -+ return cycles; ++ si = SB_INFO(sbh); ++ return (si->sb.boardvendor); +} + -+void * -+osl_reg_map(uint32 pa, uint size) ++/* return boardtype */ ++uint ++BCMINITFN(sb_boardtype)(sb_t *sbh) +{ -+ return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); -+} ++ sb_info_t *si; ++ char *var; + -+void -+osl_reg_unmap(void *va) -+{ -+ iounmap(va); -+} ++ si = SB_INFO(sbh); + -+int -+osl_busprobe(uint32 *val, uint32 addr) -+{ -+#ifdef mips -+ return get_dbe(*val, (uint32*)addr); -+#else -+ *val = readl(addr); -+ return 0; -+#endif -+} ++ if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) { ++ /* boardtype format is a hex string */ ++ si->sb.boardtype = getintvar(NULL, "boardtype"); + -+void* -+osl_dma_alloc_consistent(void *dev, uint size, ulong *pap) -+{ -+ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap)); -+} ++ /* backward compatibility for older boardtype string format */ ++ if ((si->sb.boardtype == 0) && (var = getvar(NULL, "boardtype"))) { ++ if (!strcmp(var, "bcm94710dev")) ++ si->sb.boardtype = BCM94710D_BOARD; ++ else if (!strcmp(var, "bcm94710ap")) ++ si->sb.boardtype = BCM94710AP_BOARD; ++ else if (!strcmp(var, "bu4710")) ++ si->sb.boardtype = BU4710_BOARD; ++ else if (!strcmp(var, "bcm94702mn")) ++ si->sb.boardtype = BCM94702MN_BOARD; ++ else if (!strcmp(var, "bcm94710r1")) ++ si->sb.boardtype = BCM94710R1_BOARD; ++ else if (!strcmp(var, "bcm94710r4")) ++ si->sb.boardtype = BCM94710R4_BOARD; ++ else if (!strcmp(var, "bcm94702cpci")) ++ si->sb.boardtype = BCM94702CPCI_BOARD; ++ else if (!strcmp(var, "bcm95380_rr")) ++ si->sb.boardtype = BCM95380RR_BOARD; ++ } ++ } + -+void -+osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa) -+{ -+ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa); ++ return (si->sb.boardtype); +} + ++/* return bus type of sbh device */ +uint -+osl_dma_map(void *dev, void *va, uint size, int direction) ++sb_bus(sb_t *sbh) +{ -+ int dir; ++ sb_info_t *si; + -+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; -+ return (pci_map_single(dev, va, size, dir)); ++ si = SB_INFO(sbh); ++ return (si->sb.bustype); +} + -+void -+osl_dma_unmap(void *dev, uint pa, uint size, int direction) ++/* return bus core type */ ++uint ++sb_buscoretype(sb_t *sbh) +{ -+ int dir; ++ sb_info_t *si; + -+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; -+ pci_unmap_single(dev, (uint32)pa, size, dir); -+} ++ si = SB_INFO(sbh); + -+void -+osl_delay(uint usec) -+{ -+ udelay(usec); ++ return (si->sb.buscoretype); +} + -+uchar* -+osl_pktdata(void *drv, void *skb) ++/* return bus core revision */ ++uint ++sb_buscorerev(sb_t *sbh) +{ -+ return (((struct sk_buff*)skb)->data); ++ sb_info_t *si; ++ si = SB_INFO(sbh); ++ ++ return (si->sb.buscorerev); +} + ++/* return list of found cores */ +uint -+osl_pktlen(void *drv, void *skb) ++sb_corelist(sb_t *sbh, uint coreid[]) +{ -+ return (((struct sk_buff*)skb)->len); -+} ++ sb_info_t *si; + -+void* -+osl_pktnext(void *drv, void *skb) -+{ -+ return (((struct sk_buff*)skb)->next); ++ si = SB_INFO(sbh); ++ ++ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); ++ return (si->numcores); +} + -+void -+osl_pktsetnext(void *skb, void *x) ++/* return current register mapping */ ++void * ++sb_coreregs(sb_t *sbh) +{ -+ ((struct sk_buff*)skb)->next = (struct sk_buff*)x; ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ ASSERT(GOODREGS(si->curmap)); ++ ++ return (si->curmap); +} + ++ ++/* do buffered registers update */ +void -+osl_pktsetlen(void *drv, void *skb, uint len) ++sb_commit(sb_t *sbh) +{ -+ __skb_trim((struct sk_buff*)skb, len); -+} ++ sb_info_t *si; ++ uint origidx; ++ uint intr_val = 0; + -+uchar* -+osl_pktpush(void *drv, void *skb, int bytes) -+{ -+ return (skb_push((struct sk_buff*)skb, bytes)); -+} ++ si = SB_INFO(sbh); + -+uchar* -+osl_pktpull(void *drv, void *skb, int bytes) -+{ -+ return (skb_pull((struct sk_buff*)skb, bytes)); -+} ++ origidx = si->curidx; ++ ASSERT(GOODIDX(origidx)); + -+void* -+osl_pktdup(void *drv, void *skb) -+{ -+ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC)); -+} ++ INTR_OFF(si, intr_val); + -+void* -+osl_pktcookie(void *skb) -+{ -+ return ((void*)((struct sk_buff*)skb)->csum); ++ /* switch over to chipcommon core if there is one, else use pci */ ++ if (si->sb.ccrev != NOREV) { ++ chipcregs_t *ccregs = (chipcregs_t *)sb_setcore(sbh, SB_CC, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&ccregs->broadcastaddress, SB_COMMIT); ++ W_REG(&ccregs->broadcastdata, 0x0); ++ } else if (PCI(si)) { ++ sbpciregs_t *pciregs = (sbpciregs_t *)sb_setcore(sbh, SB_PCI, 0); ++ ++ /* do the buffer registers update */ ++ W_REG(&pciregs->bcastaddr, SB_COMMIT); ++ W_REG(&pciregs->bcastdata, 0x0); ++ } else ++ ASSERT(0); ++ ++ /* restore core index */ ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); +} + ++/* reset and re-enable a core */ +void -+osl_pktsetcookie(void *skb, void *x) ++sb_core_reset(sb_t *sbh, uint32 bits) +{ -+ ((struct sk_buff*)skb)->csum = (uint)x; -+} ++ sb_info_t *si; ++ sbconfig_t *sb; ++ volatile uint32 dummy; + -+void* -+osl_pktlink(void *skb) -+{ -+ return (((struct sk_buff*)skb)->prev); ++ si = SB_INFO(sbh); ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ ++ /* ++ * Must do the disable sequence first to work for arbitrary current core state. ++ */ ++ sb_core_disable(sbh, bits); ++ ++ /* ++ * Now do the initialization sequence. ++ */ ++ ++ /* set reset while enabling the clock and forcing them on throughout the core */ ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ ++ if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) { ++ W_SBREG(si, &sb->sbtmstatehigh, 0); ++ } ++ if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { ++ AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); ++ } ++ ++ /* clear reset and allow it to propagate throughout the core */ ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ ++ /* leave clock enabled */ ++ W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); +} + +void -+osl_pktsetlink(void *skb, void *x) ++sb_core_tofixup(sb_t *sbh) +{ -+ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x; -+} ++ sb_info_t *si; ++ sbconfig_t *sb; + -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200 -@@ -0,0 +1,950 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane MIPS core routines -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ -+ */ ++ si = SB_INFO(sbh); + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ if ( (BUSTYPE(si->sb.bustype) != PCI_BUS) || (PCI(si) && (si->sb.buscorerev >= 5)) ) ++ return; + -+/* -+ * Memory segments (32bit kernel mode addresses) -+ */ -+#undef KUSEG -+#undef KSEG0 -+#undef KSEG1 -+#undef KSEG2 -+#undef KSEG3 -+#define KUSEG 0x00000000 -+#define KSEG0 0x80000000 -+#define KSEG1 0xa0000000 -+#define KSEG2 0xc0000000 -+#define KSEG3 0xe0000000 ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); + -+/* -+ * Map an address to a certain kernel segment -+ */ -+#undef KSEG0ADDR -+#undef KSEG1ADDR -+#undef KSEG2ADDR -+#undef KSEG3ADDR -+#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) -+#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) -+#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) -+#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) ++ if (BUSTYPE(si->sb.bustype) == SB_BUS) { ++ SET_SBREG(si, &sb->sbimconfiglow, ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); ++ } else { ++ if (sb_coreid(sbh) == SB_PCI) { ++ SET_SBREG(si, &sb->sbimconfiglow, ++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ } else { ++ SET_SBREG(si, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); ++ } ++ } ++ ++ sb_commit(sbh); ++} + +/* -+ * The following macros are especially useful for __asm__ -+ * inline assembler. ++ * Set the initiator timeout for the "master core". ++ * The master core is defined to be the core in control ++ * of the chip and so it issues accesses to non-memory ++ * locations (Because of dma *any* core can access memeory). ++ * ++ * The routine uses the bus to decide who is the master: ++ * SB_BUS => mips ++ * JTAG_BUS => chipc ++ * PCI_BUS => pci ++ * ++ * This routine exists so callers can disable initiator ++ * timeouts so accesses to very slow devices like otp ++ * won't cause an abort. The routine allows arbitrary ++ * settings of the service and request timeouts, though. ++ * ++ * Returns the timeout state before changing it or -1 ++ * on error. + */ -+#ifndef __STR -+#define __STR(x) #x -+#endif -+#ifndef STR -+#define STR(x) __STR(x) -+#endif + -+/* ********************************************************************* -+ * CP0 Registers -+ ********************************************************************* */ ++#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK) + -+#define C0_INX 0 /* CP0: TLB Index */ -+#define C0_RAND 1 /* CP0: TLB Random */ -+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ -+#define C0_CTEXT 4 /* CP0: Context */ -+#define C0_PGMASK 5 /* CP0: TLB PageMask */ -+#define C0_WIRED 6 /* CP0: TLB Wired */ -+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ -+#define C0_COUNT 9 /* CP0: Count */ -+#define C0_TLBHI 10 /* CP0: TLB EntryHi */ -+#define C0_COMPARE 11 /* CP0: Compare */ -+#define C0_SR 12 /* CP0: Processor Status */ -+#define C0_STATUS C0_SR /* CP0: Processor Status */ -+#define C0_CAUSE 13 /* CP0: Exception Cause */ -+#define C0_EPC 14 /* CP0: Exception PC */ -+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ -+#define C0_CONFIG 16 /* CP0: Config */ -+#define C0_LLADDR 17 /* CP0: LLAddr */ -+#define C0_WATCHLO 18 /* CP0: WatchpointLo */ -+#define C0_WATCHHI 19 /* CP0: WatchpointHi */ -+#define C0_XCTEXT 20 /* CP0: XContext */ -+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ -+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ -+#define C0_ECC 26 /* CP0: ECC */ -+#define C0_CACHEERR 27 /* CP0: CacheErr */ -+#define C0_TAGLO 28 /* CP0: TagLo */ -+#define C0_TAGHI 29 /* CP0: TagHi */ -+#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++uint32 ++sb_set_initiator_to(sb_t *sbh, uint32 to) ++{ ++ sb_info_t *si; ++ uint origidx, idx; ++ uint intr_val = 0; ++ uint32 tmp, ret = 0xffffffff; ++ sbconfig_t *sb; + -+/* -+ * Macros to access the system control coprocessor -+ */ ++ si = SB_INFO(sbh); + -+#define MFC0(source, sel) \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ -+ "move\t%0,$1\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ :"=r" (__res) \ -+ : \ -+ :"$1"); \ -+ __res; \ -+}) ++ if ((to & ~TO_MASK) != 0) ++ return ret; + -+#define MTC0(source, sel, value) \ -+do { \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ "move\t$1,%z0\n\t" \ -+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ : \ -+ :"Jr" (value) \ -+ :"$1"); \ -+} while (0) ++ /* Figure out the master core */ ++ idx = BADIDX; ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: ++ idx = si->sb.buscoreidx; ++ break; ++ case JTAG_BUS: ++ idx = SB_CC_IDX; ++ break; ++ case SB_BUS: ++ if ((idx = sb_findcoreidx(si, SB_MIPS33, 0)) == BADIDX) ++ idx = sb_findcoreidx(si, SB_MIPS, 0); ++ break; ++ default: ++ ASSERT(0); ++ } ++ if (idx == BADIDX) ++ return ret; + -+/* -+ * R4x00 interrupt enable / cause bits -+ */ -+#undef IE_SW0 -+#undef IE_SW1 -+#undef IE_IRQ0 -+#undef IE_IRQ1 -+#undef IE_IRQ2 -+#undef IE_IRQ3 -+#undef IE_IRQ4 -+#undef IE_IRQ5 -+#define IE_SW0 (1<< 8) -+#define IE_SW1 (1<< 9) -+#define IE_IRQ0 (1<<10) -+#define IE_IRQ1 (1<<11) -+#define IE_IRQ2 (1<<12) -+#define IE_IRQ3 (1<<13) -+#define IE_IRQ4 (1<<14) -+#define IE_IRQ5 (1<<15) ++ INTR_OFF(si, intr_val); ++ origidx = sb_coreidx(sbh); + -+/* -+ * Bitfields in the R4xx0 cp0 status register -+ */ -+#define ST0_IE 0x00000001 -+#define ST0_EXL 0x00000002 -+#define ST0_ERL 0x00000004 -+#define ST0_KSU 0x00000018 -+# define KSU_USER 0x00000010 -+# define KSU_SUPERVISOR 0x00000008 -+# define KSU_KERNEL 0x00000000 -+#define ST0_UX 0x00000020 -+#define ST0_SX 0x00000040 -+#define ST0_KX 0x00000080 -+#define ST0_DE 0x00010000 -+#define ST0_CE 0x00020000 ++ sb = REGS2SB(sb_setcoreidx(sbh, idx)); + -+/* -+ * Status register bits available in all MIPS CPUs. -+ */ -+#define ST0_IM 0x0000ff00 -+#define ST0_CH 0x00040000 -+#define ST0_SR 0x00100000 -+#define ST0_TS 0x00200000 -+#define ST0_BEV 0x00400000 -+#define ST0_RE 0x02000000 -+#define ST0_FR 0x04000000 -+#define ST0_CU 0xf0000000 -+#define ST0_CU0 0x10000000 -+#define ST0_CU1 0x20000000 -+#define ST0_CU2 0x40000000 -+#define ST0_CU3 0x80000000 -+#define ST0_XX 0x80000000 /* MIPS IV naming */ ++ tmp = R_SBREG(si, &sb->sbimconfiglow); ++ ret = tmp & TO_MASK; ++ W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to); + -+/* -+ * Cache Operations -+ */ ++ sb_commit(sbh); ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return ret; ++} + -+#ifndef Fill_I -+#define Fill_I 0x14 -+#endif ++void ++sb_core_disable(sb_t *sbh, uint32 bits) ++{ ++ sb_info_t *si; ++ volatile uint32 dummy; ++ uint32 rej; ++ sbconfig_t *sb; + -+#define cache_unroll(base,op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, (%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); ++ si = SB_INFO(sbh); + -+/* -+ * These are the UART port assignments, expressed as offsets from the base -+ * register. These assignments should hold for any serial port based on -+ * a 8250, 16450, or 16550(A). -+ */ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); + -+#define UART_MCR 4 /* Out: Modem Control Register */ -+#define UART_MSR 6 /* In: Modem Status Register */ -+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++ /* if core is already in reset, just return */ ++ if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET) ++ return; + -+/* -+ * Returns TRUE if an external UART exists at the given base -+ * register. -+ */ -+static bool -+serial_exists(uint8 *regs) -+{ -+ uint8 save_mcr, status1; ++ /* reject value changed between sonics 2.2 and 2.3 */ ++ if (si->sb.sonicsrev == SONICS_2_2) ++ rej = (1 << SBTML_REJ_SHIFT); ++ else ++ rej = (2 << SBTML_REJ_SHIFT); + -+ save_mcr = R_REG(®s[UART_MCR]); -+ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a); -+ status1 = R_REG(®s[UART_MSR]) & 0xf0; -+ W_REG(®s[UART_MCR], save_mcr); ++ /* if clocks are not enabled, put into reset and return */ ++ if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0) ++ goto disable; + -+ return (status1 == 0x90); ++ /* set target reject and spin until busy is clear (preserve core-specific bits) */ ++ OR_SBREG(si, &sb->sbtmstatelow, rej); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(1); ++ SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000); ++ ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) { ++ OR_SBREG(si, &sb->sbimstate, SBIM_RJ); ++ dummy = R_SBREG(si, &sb->sbimstate); ++ OSL_DELAY(1); ++ SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000); ++ } ++ ++ /* set reset and reject while enabling the clocks */ ++ W_SBREG(si, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET)); ++ dummy = R_SBREG(si, &sb->sbtmstatelow); ++ OSL_DELAY(10); ++ ++ /* don't forget to clear the initiator reject bit */ ++ if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) ++ AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ); ++ ++disable: ++ /* leave reset and reject asserted */ ++ W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET)); ++ OSL_DELAY(1); +} + -+/* -+ * Initializes UART access. The callback function will be called once -+ * per found UART. -+*/ ++/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +void -+sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)) ++sb_watchdog(sb_t *sbh, uint ticks) +{ -+ void *regs; -+ ulong base; -+ uint irq; -+ int i, n; ++ sb_info_t *si = SB_INFO(sbh); + -+ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) { -+ extifregs_t *eir = (extifregs_t *) regs; -+ sbconfig_t *sb; ++ /* instant NMI */ ++ switch (si->gpioid) { ++ case SB_CC: ++ sb_corereg(si, 0, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); ++ break; ++ case SB_EXTIF: ++ sb_corereg(si, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); ++ break; ++ } ++} + -+ /* Determine external UART register base */ -+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF); -+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1))); + -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); ++/* ++ * Configure the pci core for pci client (NIC) action ++ * coremask is the bitvec of cores by index to be enabled. ++ */ ++void ++sb_pci_setup(sb_t *sbh, uint coremask) ++{ ++ sb_info_t *si; ++ sbconfig_t *sb; ++ sbpciregs_t *pciregs; ++ uint32 sbflag; ++ uint32 w; ++ uint idx; + -+ /* Disable GPIO interrupt initially */ -+ W_REG(&eir->gpiointpolarity, 0); -+ W_REG(&eir->gpiointmask, 0); ++ si = SB_INFO(sbh); + -+ /* Search for external UARTs */ -+ n = 2; -+ for (i = 0; i < 2; i++) { -+ regs = (void *) REG_MAP(base + (i * 8), 8); -+ if (serial_exists(regs)) { -+ /* Set GPIO 1 to be the external UART IRQ */ -+ W_REG(&eir->gpiointmask, 2); -+ if (add) -+ add(regs, irq, 13500000, 0); -+ } -+ } -+ -+ /* Add internal UART if enabled */ -+ if (R_REG(&eir->corecontrol) & CC_UE) -+ if (add) -+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2); -+ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) { -+ chipcregs_t *cc = (chipcregs_t *) regs; -+ uint32 rev, cap, pll, baud_base, div; ++ /* if not pci bus, we're done */ ++ if (BUSTYPE(si->sb.bustype) != PCI_BUS) ++ return; + -+ /* Determine core revision and capabilities */ -+ rev = sb_corerev(sbh); -+ cap = R_REG(&cc->capabilities); -+ pll = cap & CAP_PLL_MASK; ++ ASSERT(PCI(si)); ++ ASSERT(si->sb.buscoreidx != BADIDX); + -+ /* Determine IRQ */ -+ irq = sb_irq(sbh); ++ /* get current core index */ ++ idx = si->curidx; + -+ if (pll == PLL_TYPE1) { -+ /* PLL clock */ -+ baud_base = sb_clock_rate(pll, -+ R_REG(&cc->clockcontrol_n), -+ R_REG(&cc->clockcontrol_m2)); -+ div = 1; -+ } else if (rev >= 3) { -+ /* Internal backplane clock */ -+ baud_base = sb_clock_rate(pll, -+ R_REG(&cc->clockcontrol_n), -+ R_REG(&cc->clockcontrol_sb)); -+ div = 2; /* Minimum divisor */ -+ W_REG(&cc->uart_clkdiv, div); -+ } else { -+ /* Fixed internal backplane clock */ -+ baud_base = 88000000; -+ div = 48; -+ } ++ /* we interrupt on this backplane flag number */ ++ ASSERT(GOODREGS(si->curmap)); ++ sb = REGS2SB(si->curmap); ++ sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK; + -+ /* Clock source depends on strapping if UartClkOverride is unset */ -+ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) { -+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) { -+ /* Internal divided backplane clock */ -+ baud_base /= div; -+ } else { -+ /* Assume external clock of 1.8432 MHz */ -+ baud_base = 1843200; -+ } -+ } ++ /* switch over to pci core */ ++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->sb.buscoreidx); ++ sb = REGS2SB(pciregs); + -+ /* Add internal UARTs */ -+ n = cap & CAP_UARTS_MASK; -+ for (i = 0; i < n; i++) { -+ /* Register offset changed after revision 0 */ -+ if (rev) -+ regs = (void *)((ulong) &cc->uart0data + (i * 256)); -+ else -+ regs = (void *)((ulong) &cc->uart0data + (i * 8)); ++ /* ++ * Enable sb->pci interrupts. Assume ++ * PCI rev 2.3 support was added in pci core rev 6 and things changed.. ++ */ ++ if ((PCI(si) && ((si->sb.buscorerev) >= 6))) { ++ /* pci config write to set this core bit in PCIIntMask */ ++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); ++ w |= (coremask << PCI_SBIM_SHIFT); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); ++ } else { ++ /* set sbintvec bit for our flag number */ ++ OR_SBREG(si, &sb->sbintvec, (1 << sbflag)); ++ } + -+ if (add) -+ add(regs, irq, baud_base, 0); ++ if (PCI(si)) { ++ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); ++ if (si->sb.buscorerev >= 11) ++ OR_REG(&pciregs->sbtopci2, SBTOPCI_RC_READMULTI); ++ if (si->sb.buscorerev < 5) { ++ SET_SBREG(si, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, ++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); ++ sb_commit(sbh); + } + } ++ ++ /* switch back to previous core */ ++ sb_setcoreidx(sbh, idx); +} + -+/* Returns the SB interrupt flag of the current core. */ +uint32 -+sb_flag(void *sbh) ++sb_base(uint32 admatch) +{ -+ void *regs; -+ sbconfig_t *sb; ++ uint32 base; ++ uint type; + -+ regs = sb_coreregs(sbh); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ type = admatch & SBAM_TYPE_MASK; ++ ASSERT(type < 3); + -+ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK); -+} ++ base = 0; + -+static const uint32 sbips_int_mask[] = { -+ 0, -+ SBIPS_INT1_MASK, -+ SBIPS_INT2_MASK, -+ SBIPS_INT3_MASK, -+ SBIPS_INT4_MASK -+}; ++ if (type == 0) { ++ base = admatch & SBAM_BASE0_MASK; ++ } else if (type == 1) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ base = admatch & SBAM_BASE1_MASK; ++ } else if (type == 2) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ base = admatch & SBAM_BASE2_MASK; ++ } + -+static const uint32 sbips_int_shift[] = { -+ 0, -+ 0, -+ SBIPS_INT2_SHIFT, -+ SBIPS_INT3_SHIFT, -+ SBIPS_INT4_SHIFT -+}; ++ return (base); ++} + -+/* -+ * Returns the MIPS IRQ assignment of the current core. If unassigned, -+ * 0 is returned. -+ */ -+uint -+sb_irq(void *sbh) ++uint32 ++sb_size(uint32 admatch) +{ -+ uint idx; -+ void *regs; -+ sbconfig_t *sb; -+ uint32 flag, sbipsflag; -+ uint irq = 0; -+ -+ flag = sb_flag(sbh); ++ uint32 size; ++ uint type; + -+ idx = sb_coreidx(sbh); ++ type = admatch & SBAM_TYPE_MASK; ++ ASSERT(type < 3); + -+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || -+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ size = 0; + -+ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ -+ sbipsflag = R_REG(&sb->sbipsflag); -+ for (irq = 1; irq <= 4; irq++) { -+ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) -+ break; -+ } -+ if (irq == 5) -+ irq = 0; ++ if (type == 0) { ++ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); ++ } else if (type == 1) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); ++ } else if (type == 2) { ++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ ++ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); + } + -+ sb_setcoreidx(sbh, idx); -+ -+ return irq; ++ return (size); +} + -+/* Clears the specified MIPS IRQ. */ -+static void -+sb_clearirq(void *sbh, uint irq) ++/* return the core-type instantiation # of the current core */ ++uint ++sb_coreunit(sb_t *sbh) +{ -+ void *regs; -+ sbconfig_t *sb; ++ sb_info_t *si; ++ uint idx; ++ uint coreid; ++ uint coreunit; ++ uint i; + -+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(regs); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ si = SB_INFO(sbh); ++ coreunit = 0; + -+ if (irq == 0) -+ W_REG(&sb->sbintvec, 0); -+ else -+ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]); -+} ++ idx = si->curidx; + -+/* -+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS -+ * IRQ 0 may be assigned more than once. -+ */ -+static void -+sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit) -+{ -+ void *regs; -+ sbconfig_t *sb; -+ uint32 flag; ++ ASSERT(GOODREGS(si->curmap)); ++ coreid = sb_coreid(sbh); + -+ regs = sb_setcore(sbh, coreid, coreunit); -+ ASSERT(regs); -+ flag = sb_flag(sbh); ++ /* count the cores of our type */ ++ for (i = 0; i < idx; i++) ++ if (si->coreid[i] == coreid) ++ coreunit++; + -+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(regs = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(regs); -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ return (coreunit); ++} + -+ if (irq == 0) -+ OR_REG(&sb->sbintvec, 1 << flag); -+ else { -+ flag <<= sbips_int_shift[irq]; -+ ASSERT(!(flag & ~sbips_int_mask[irq])); -+ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq]; -+ W_REG(&sb->sbipsflag, flag); ++static INLINE uint32 ++factor6(uint32 x) ++{ ++ switch (x) { ++ case CC_F6_2: return 2; ++ case CC_F6_3: return 3; ++ case CC_F6_4: return 4; ++ case CC_F6_5: return 5; ++ case CC_F6_6: return 6; ++ case CC_F6_7: return 7; ++ default: return 0; + } -+} ++} + -+/* -+ * Initializes clocks and interrupts. SB and NVRAM access must be -+ * initialized prior to calling. -+ */ -+void -+sb_mips_init(void *sbh) ++/* calculate the speed the SB would run at given a set of clockcontrol values */ ++uint32 ++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) +{ -+ ulong hz, ns, tmp; -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ char *value; -+ uint irq; ++ uint32 n1, n2, clock, m1, m2, m3, mc; + -+ /* Figure out current SB clock speed */ -+ if ((hz = sb_clock(sbh)) == 0) -+ hz = 100000000; -+ ns = 1000000000 / hz; ++ n1 = n & CN_N1_MASK; ++ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; + -+ /* Setup external interface timing */ -+ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { -+ /* Initialize extif so we can get to the LEDs and external UART */ -+ W_REG(&eir->prog_config, CF_EN); ++ if (pll_type == PLL_TYPE6) { ++ if (m & CC_T6_MMASK) ++ return CC_T6_M1; ++ else ++ return CC_T6_M0; ++ } else if ((pll_type == PLL_TYPE1) || ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { ++ n1 = factor6(n1); ++ n2 += CC_F5_BIAS; ++ } else if (pll_type == PLL_TYPE2) { ++ n1 += CC_T2_BIAS; ++ n2 += CC_T2_BIAS; ++ ASSERT((n1 >= 2) && (n1 <= 7)); ++ ASSERT((n2 >= 5) && (n2 <= 23)); ++ } else if (pll_type == PLL_TYPE5) { ++ return (100000000); ++ } else ++ ASSERT(0); ++ /* PLL types 3 and 7 use BASE2 (25Mhz) */ ++ if ((pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE7)) { ++ clock = CC_CLOCK_BASE2 * n1 * n2; ++ } ++ else ++ clock = CC_CLOCK_BASE1 * n1 * n2; + -+ /* Set timing for the flash */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ -+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ ++ if (clock == 0) ++ return 0; + -+ /* Set programmable interface timing for external uart */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ -+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ -+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ -+ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { -+ /* Set timing for the flash */ -+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -+ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ -+ tmp |= CEIL(120, ns); /* W0 = 120nS */ -+ W_REG(&cc->parallelflashwaitcnt, tmp); ++ m1 = m & CC_M1_MASK; ++ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; ++ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; ++ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; + -+ W_REG(&cc->cs01memwaitcnt, tmp); -+ } ++ if ((pll_type == PLL_TYPE1) || ++ (pll_type == PLL_TYPE3) || ++ (pll_type == PLL_TYPE4) || ++ (pll_type == PLL_TYPE7)) { ++ m1 = factor6(m1); ++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3)) ++ m2 += CC_F5_BIAS; ++ else ++ m2 = factor6(m2); ++ m3 = factor6(m3); + -+ /* Chip specific initialization */ -+ switch (sb_chip(sbh)) { -+ case BCM4710_DEVICE_ID: -+ /* Clear interrupt map */ -+ for (irq = 0; irq <= 4; irq++) -+ sb_clearirq(sbh, irq); -+ sb_setirq(sbh, 0, SB_CODEC, 0); -+ sb_setirq(sbh, 0, SB_EXTIF, 0); -+ sb_setirq(sbh, 2, SB_ENET, 1); -+ sb_setirq(sbh, 3, SB_ILINE20, 0); -+ sb_setirq(sbh, 4, SB_PCI, 0); -+ ASSERT(eir); -+ value = nvram_get("et0phyaddr"); -+ if (value && !strcmp(value, "31")) { -+ /* Enable internal UART */ -+ W_REG(&eir->corecontrol, CC_UE); -+ /* Give USB its own interrupt */ -+ sb_setirq(sbh, 1, SB_USB, 0); -+ } else { -+ /* Disable internal UART */ -+ W_REG(&eir->corecontrol, 0); -+ /* Give Ethernet its own interrupt */ -+ sb_setirq(sbh, 1, SB_ENET, 0); -+ sb_setirq(sbh, 0, SB_USB, 0); ++ switch (mc) { ++ case CC_MC_BYPASS: return (clock); ++ case CC_MC_M1: return (clock / m1); ++ case CC_MC_M1M2: return (clock / (m1 * m2)); ++ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); ++ case CC_MC_M1M3: return (clock / (m1 * m3)); ++ default: return (0); + } -+ break; -+ case BCM4310_DEVICE_ID: -+ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22)); -+ break; ++ } else { ++ ASSERT(pll_type == PLL_TYPE2); ++ ++ m1 += CC_T2_BIAS; ++ m2 += CC_T2M2_BIAS; ++ m3 += CC_T2_BIAS; ++ ASSERT((m1 >= 2) && (m1 <= 7)); ++ ASSERT((m2 >= 3) && (m2 <= 10)); ++ ASSERT((m3 >= 2) && (m3 <= 7)); ++ ++ if ((mc & CC_T2MC_M1BYP) == 0) ++ clock /= m1; ++ if ((mc & CC_T2MC_M2BYP) == 0) ++ clock /= m2; ++ if ((mc & CC_T2MC_M3BYP) == 0) ++ clock /= m3; ++ ++ return(clock); + } +} + ++/* returns the current speed the SB is running at */ +uint32 -+sb_mips_clock(void *sbh) ++sb_clock(sb_t *sbh) +{ ++ sb_info_t *si; + extifregs_t *eir; + chipcregs_t *cc; + uint32 n, m; + uint idx; -+ uint32 pll_type, rate = 0; ++ uint32 pll_type, rate; ++ uint intr_val = 0; + -+ /* get index of the current core */ -+ idx = sb_coreidx(sbh); ++ si = SB_INFO(sbh); ++ idx = si->curidx; + pll_type = PLL_TYPE1; + ++ INTR_OFF(si, intr_val); ++ + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { + n = R_REG(&eir->clockcontrol_n); @@ -4880,3822 +4240,3985 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brc + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + n = R_REG(&cc->clockcontrol_n); -+ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) ++ if (pll_type == PLL_TYPE6) + m = R_REG(&cc->clockcontrol_mips); -+ else if (pll_type == PLL_TYPE3) { -+ rate = 200000000; -+ goto out; -+ } else ++ else if (pll_type == PLL_TYPE3) ++ { ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ m = R_REG(&cc->clockcontrol_sb); ++ else ++ m = R_REG(&cc->clockcontrol_m2); ++ } ++ else + m = R_REG(&cc->clockcontrol_sb); -+ } else -+ goto out; ++ } else { ++ INTR_RESTORE(si, intr_val); ++ return 0; ++ } + -+ /* calculate rate */ -+ rate = sb_clock_rate(pll_type, n, m); ++ // Added by Chen-I for 5365 ++ if (BCMINIT(sb_chip)(sbh) == BCM5365_DEVICE_ID) ++ { ++ rate = 100000000; ++ } ++ else ++ { ++ /* calculate rate */ ++ rate = sb_clock_rate(pll_type, n, m); ++ if (pll_type == PLL_TYPE3) ++ rate = rate / 2; ++ } + -+out: + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + ++ INTR_RESTORE(si, intr_val); ++ + return rate; +} + -+static void -+icache_probe(int *size, int *lsize) ++/* change logical "focus" to the gpio core for optimized access */ ++void* ++sb_gpiosetcore(sb_t *sbh) +{ -+ uint32 config1; -+ uint sets, ways; ++ sb_info_t *si; + -+ config1 = MFC0(C0_CONFIG, 1); ++ si = SB_INFO(sbh); + -+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((*lsize = ((config1 >> 19) & 7))) -+ *lsize = 2 << *lsize; -+ sets = 64 << ((config1 >> 22) & 7); -+ ways = 1 + ((config1 >> 16) & 7); -+ *size = *lsize * sets * ways; ++ return (sb_setcoreidx(sbh, si->gpioidx)); +} + -+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -+ -+static void -+handler(void) ++/* mask&set gpiocontrol bits */ ++uint32 ++sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ -+ /* Step 11 */ -+ __asm__ ( -+ ".set\tmips32\n\t" -+ "ssnop\n\t" -+ "ssnop\n\t" -+ /* Disable interrupts */ -+ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ -+ "mfc0 $15, $12\n\t" -+ "and $15, $15, -31746\n\t" -+ "mtc0 $15, $12\n\t" -+ "eret\n\t" -+ "nop\n\t" -+ "nop\n\t" -+ ".set\tmips0" -+ ); -+} ++ sb_info_t *si; ++ uint regoff; + -+/* The following MUST come right after handler() */ -+static void -+afterhandler(void) -+{ -+} ++ si = SB_INFO(sbh); ++ regoff = 0; + -+/* -+ * Set the MIPS, backplane and PCI clocks as closely as possible. -+ */ -+bool -+sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) -+{ -+ extifregs_t *eir = NULL; -+ chipcregs_t *cc = NULL; -+ mipsregs_t *mipsr = NULL; -+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci; -+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio; -+ uint32 pll_type, sync_mode; -+ uint idx, i; -+ struct { -+ uint32 mipsclock; -+ uint16 n; -+ uint32 sb; -+ uint32 pci33; -+ uint32 pci25; -+ } type1_table[] = { -+ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */ -+ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */ -+ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */ -+ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */ -+ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */ -+ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */ -+ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */ -+ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */ -+ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */ -+ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */ -+ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */ -+ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */ -+ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */ -+ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */ -+ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */ -+ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */ -+ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */ -+ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */ -+ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */ -+ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */ -+ }; -+ typedef struct { -+ uint32 mipsclock; -+ uint32 sbclock; -+ uint16 n; -+ uint32 sb; -+ uint32 pci33; -+ uint32 m2; -+ uint32 m3; -+ uint32 ratio; -+ uint32 ratio_parm; -+ } n4m_table_t; ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ n4m_table_t type2_table[] = { -+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, -+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 }, -+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, -+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 }, -+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 }, -+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 } -+ }; ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } + -+ n4m_table_t type4_table[] = { -+ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, -+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 }, -+ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, -+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 }, -+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 }, -+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 }, -+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, -+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 }, -+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, -+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, -+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 }, -+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 } -+ }; -+ uint icache_size, ic_lsize; -+ ulong start, end, dst; -+ bool ret = FALSE; ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiocontrol); ++ break; + -+ /* get index of the current core */ -+ idx = sb_coreidx(sbh); ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpiocontrol); ++ break; + -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ pll_type = PLL_TYPE1; -+ clockcontrol_n = &eir->clockcontrol_n; -+ clockcontrol_sb = &eir->clockcontrol_sb; -+ clockcontrol_pci = &eir->clockcontrol_pci; -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; -+ clockcontrol_n = &cc->clockcontrol_n; -+ clockcontrol_sb = &cc->clockcontrol_sb; -+ clockcontrol_pci = &cc->clockcontrol_pci; -+ } else -+ goto done; ++ case SB_EXTIF: ++ return (0); ++ } + -+ /* Store the current clock register values */ -+ orig_n = R_REG(clockcontrol_n); -+ orig_sb = R_REG(clockcontrol_sb); -+ orig_pci = R_REG(clockcontrol_pci); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} + -+ if (pll_type == PLL_TYPE1) { -+ /* Keep the current PCI clock if not specified */ -+ if (pciclock == 0) { -+ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci)); -+ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; -+ } ++/* mask&set gpio output enable bits */ ++uint32 ++sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; + -+ /* Search for the closest MIPS clock less than or equal to a preferred value */ -+ for (i = 0; i < ARRAYSIZE(type1_table); i++) { -+ ASSERT(type1_table[i].mipsclock == -+ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb)); -+ if (type1_table[i].mipsclock > mipsclock) -+ break; -+ } -+ if (i == 0) { -+ ret = FALSE; -+ goto done; -+ } else { -+ ret = TRUE; -+ i--; -+ } -+ ASSERT(type1_table[i].mipsclock <= mipsclock); ++ si = SB_INFO(sbh); ++ regoff = 0; + -+ /* No PLL change */ -+ if ((orig_n == type1_table[i].n) && -+ (orig_sb == type1_table[i].sb) && -+ (orig_pci == type1_table[i].pci33)) -+ goto done; ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ /* Set the PLL controls */ -+ W_REG(clockcontrol_n, type1_table[i].n); -+ W_REG(clockcontrol_sb, type1_table[i].sb); -+ if (pciclock == 25000000) -+ W_REG(clockcontrol_pci, type1_table[i].pci25); -+ else -+ W_REG(clockcontrol_pci, type1_table[i].pci33); ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } + -+ /* Reset */ -+ sb_watchdog(sbh, 1); -+ while (1); -+ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) { -+ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table; -+ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table); ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioouten); ++ break; + -+ ASSERT(cc); ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioouten); ++ break; + -+ /* Store the current clock register values */ -+ orig_m2 = R_REG(&cc->clockcontrol_m2); -+ orig_mips = R_REG(&cc->clockcontrol_mips); -+ orig_ratio_parm = 0; ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpio[0].outen); ++ break; ++ } + -+ /* Look up current ratio */ -+ for (i = 0; i < tabsz; i++) { -+ if ((orig_n == table[i].n) && -+ (orig_sb == table[i].sb) && -+ (orig_pci == table[i].pci33) && -+ (orig_m2 == table[i].m2) && -+ (orig_mips == table[i].m3)) { -+ orig_ratio_parm = table[i].ratio_parm; -+ break; -+ } -+ } -+ -+ /* Search for the closest MIPS clock greater or equal to a preferred value */ -+ for (i = 0; i < tabsz; i++) { -+ ASSERT(table[i].mipsclock == -+ sb_clock_rate(pll_type, table[i].n, table[i].m3)); -+ if ((mipsclock <= table[i].mipsclock) && -+ ((sbclock == 0) || (sbclock <= table[i].sbclock))) -+ break; -+ } -+ if (i == tabsz) { -+ ret = FALSE; -+ goto done; -+ } else { -+ ret = TRUE; -+ } -+ -+ /* No PLL change */ -+ if ((orig_n == table[i].n) && -+ (orig_sb == table[i].sb) && -+ (orig_pci == table[i].pci33) && -+ (orig_m2 == table[i].m2) && -+ (orig_mips == table[i].m3)) -+ goto done; ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} + -+ /* Set the PLL controls */ -+ W_REG(clockcontrol_n, table[i].n); -+ W_REG(clockcontrol_sb, table[i].sb); -+ W_REG(clockcontrol_pci, table[i].pci33); -+ W_REG(&cc->clockcontrol_m2, table[i].m2); -+ W_REG(&cc->clockcontrol_mips, table[i].m3); ++/* mask&set gpio output bits */ ++uint32 ++sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; + -+ /* No ratio change */ -+ if (orig_ratio_parm == table[i].ratio_parm) -+ goto end_fill; ++ si = SB_INFO(sbh); ++ regoff = 0; + -+ new_ratio = table[i].ratio_parm; ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ icache_probe(&icache_size, &ic_lsize); ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } + -+ /* Preload the code into the cache */ -+ start = ((ulong) &&start_fill) & ~(ic_lsize - 1); -+ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); -+ while (start < end) { -+ cache_unroll(start, Fill_I); -+ start += ic_lsize; -+ } ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioout); ++ break; + -+ /* Copy the handler */ -+ start = (ulong) &handler; -+ end = (ulong) &afterhandler; -+ dst = KSEG1ADDR(0x180); -+ for (i = 0; i < (end - start); i += 4) -+ *((ulong *)(dst + i)) = *((ulong *)(start + i)); -+ -+ /* Preload handler into the cache one line at a time */ -+ for (i = 0; i < (end - start); i += 4) -+ cache_unroll(dst + i, Fill_I); ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioout); ++ break; + -+ /* Clear BEV bit */ -+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpio[0].out); ++ break; ++ } + -+ /* Enable interrupts */ -+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} + -+ /* Enable MIPS timer interrupt */ -+ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && -+ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) -+ ASSERT(mipsr); -+ W_REG(&mipsr->intmask, 1); ++/* reserve one gpio */ ++uint32 ++sb_gpioreserve(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) ++{ ++ sb_info_t *si; + -+ start_fill: -+ /* step 1, set clock ratios */ -+ MTC0(C0_BROADCOM, 3, new_ratio); -+ MTC0(C0_BROADCOM, 1, 8); ++ si = SB_INFO(sbh); + -+ /* step 2: program timer intr */ -+ W_REG(&mipsr->timer, 100); -+ (void) R_REG(&mipsr->timer); ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ /* step 3, switch to async */ -+ sync_mode = MFC0(C0_BROADCOM, 4); -+ MTC0(C0_BROADCOM, 4, 1 << 22); ++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ ++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); ++ return -1; ++ } ++ /* make sure only one bit is set */ ++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { ++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); ++ return -1; ++ } + -+ /* step 4, set cfg active */ -+ MTC0(C0_BROADCOM, 2, 0x9); ++ /* already reserved */ ++ if (sb_gpioreservation & gpio_bitmask) ++ return -1; ++ /* set reservation */ ++ sb_gpioreservation |= gpio_bitmask; + ++ return sb_gpioreservation; ++} + -+ /* steps 5 & 6 */ -+ __asm__ __volatile__ ( -+ ".set\tmips3\n\t" -+ "wait\n\t" -+ ".set\tmips0" -+ ); ++/* release one gpio */ ++/* ++ * releasing the gpio doesn't change the current value on the GPIO last write value ++ * persists till some one overwrites it ++*/ + -+ /* step 7, clear cfg_active */ -+ MTC0(C0_BROADCOM, 2, 0); -+ -+ /* Additional Step: set back to orig sync mode */ -+ MTC0(C0_BROADCOM, 4, sync_mode); ++uint32 ++sb_gpiorelease(sb_t *sbh, uint32 gpio_bitmask, uint8 priority) ++{ ++ sb_info_t *si; + -+ /* step 8, fake soft reset */ -+ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4); ++ si = SB_INFO(sbh); + -+ end_fill: -+ /* step 9 set watchdog timer */ -+ sb_watchdog(sbh, 20); -+ (void) R_REG(&cc->chipid); ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ /* step 11 */ -+ __asm__ __volatile__ ( -+ ".set\tmips3\n\t" -+ "sync\n\t" -+ "wait\n\t" -+ ".set\tmips0" -+ ); -+ while (1); ++ /* only cores on SB_BUS share GPIO's and only applcation users need to reserve/release GPIO */ ++ if ( (BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) { ++ ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority)); ++ return -1; ++ } ++ /* make sure only one bit is set */ ++ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) { ++ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1))); ++ return -1; + } ++ ++ /* already released */ ++ if (!(sb_gpioreservation & gpio_bitmask)) ++ return -1; + -+done: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); ++ /* clear reservation */ ++ sb_gpioreservation &= ~gpio_bitmask; + -+ return ret; ++ return sb_gpioreservation; +} + -+ -+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */ ++/* return the current gpioin register value */ +uint32 -+sb_memc_get_ncdl(void *sbh) ++sb_gpioin(sb_t *sbh) +{ -+ sbmemcregs_t *memc; -+ uint32 ret = 0; -+ uint32 config, rd, wr, misc, dqsg, cd, sm, sd; -+ uint idx, rev; -+ -+ idx = sb_coreidx(sbh); -+ -+ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0); -+ if (memc == 0) -+ goto out; ++ sb_info_t *si; ++ uint regoff; + -+ rev = sb_corerev(sbh); ++ si = SB_INFO(sbh); ++ regoff = 0; + -+ config = R_REG(&memc->config); -+ wr = R_REG(&memc->wrncdlcor); -+ rd = R_REG(&memc->rdncdlcor); -+ misc = R_REG(&memc->miscdlyctl); -+ dqsg = R_REG(&memc->dqsgatencdl); ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpioin); ++ break; + -+ rd &= MEMC_RDNCDLCOR_RD_MASK; -+ wr &= MEMC_WRNCDLCOR_WR_MASK; -+ dqsg &= MEMC_DQSGATENCDL_G_MASK; ++ case SB_PCI: ++ regoff = OFFSETOF(sbpciregs_t, gpioin); ++ break; + -+ if (config & MEMC_CONFIG_DDR) { -+ ret = (wr << 16) | (rd << 8) | dqsg; -+ } else { -+ if (rev > 0) -+ cd = rd; -+ else -+ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); -+ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; -+ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; -+ ret = (sm << 16) | (sd << 8) | cd; ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpioin); ++ break; + } + -+out: -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+ -+ return ret; ++ return (sb_corereg(si, si->gpioidx, regoff, 0, 0)); +} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200 -@@ -0,0 +1,530 @@ -+/* -+ * Low-Level PCI and SB support for BCM47xx -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $ -+ */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/* mask&set gpio interrupt polarity bits */ ++uint32 ++sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) ++{ ++ sb_info_t *si; ++ uint regoff; + -+/* Can free sbpci_init() memory after boot */ -+#ifndef linux -+#define __init -+#endif ++ si = SB_INFO(sbh); ++ regoff = 0; + -+/* Emulated configuration space */ -+static pci_config_regs sb_config_regs[SB_MAXCORES]; ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+/* Banned cores */ -+static uint16 pci_ban[32] = { 0 }; -+static uint pci_banned = 0; ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; ++ } + -+/* CardBus mode */ -+static bool cardbus = FALSE; ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiointpolarity); ++ break; + -+/* -+ * Functions for accessing external PCI configuration space -+ */ ++ case SB_PCI: ++ /* pci gpio implementation does not support interrupt polarity */ ++ ASSERT(0); ++ break; + -+/* Assume one-hot slot wiring */ -+#define PCI_SLOT_MAX 16 ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpiointpolarity); ++ break; ++ } + -+static uint32 -+config_cmd(void *sbh, uint bus, uint dev, uint func, uint off) ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} ++ ++/* mask&set gpio interrupt mask bits */ ++uint32 ++sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority) +{ -+ uint coreidx; -+ sbpciregs_t *regs; -+ uint32 addr = 0; ++ sb_info_t *si; ++ uint regoff; + -+ /* CardBusMode supports only one device */ -+ if (cardbus && dev > 1) -+ return 0; ++ si = SB_INFO(sbh); ++ regoff = 0; + -+ coreidx = sb_coreidx(sbh); -+ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); ++ priority = GPIO_DRV_PRIORITY; /* compatibility hack */ + -+ /* Type 0 transaction */ -+ if (bus == 1) { -+ /* Skip unwired slots */ -+ if (dev < PCI_SLOT_MAX) { -+ /* Slide the PCI window to the appropriate slot */ -+ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK)); -+ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) | -+ (func << 8) | (off & ~3); -+ } ++ /* gpios could be shared on router platforms */ ++ if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) { ++ mask = priority ? (sb_gpioreservation & mask) : ++ ((sb_gpioreservation | mask) & ~(sb_gpioreservation)); ++ val &= mask; + } + -+ /* Type 1 transaction */ -+ else { -+ W_REG(®s->sbtopci1, SBTOPCI_CFG1); -+ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3); ++ switch (si->gpioid) { ++ case SB_CC: ++ regoff = OFFSETOF(chipcregs_t, gpiointmask); ++ break; ++ ++ case SB_PCI: ++ /* pci gpio implementation does not support interrupt mask */ ++ ASSERT(0); ++ break; ++ ++ case SB_EXTIF: ++ regoff = OFFSETOF(extifregs_t, gpiointmask); ++ break; + } + -+ sb_setcoreidx(sbh, coreidx); ++ return (sb_corereg(si, si->gpioidx, regoff, mask, val)); ++} + -+ return addr; ++/* assign the gpio to an led */ ++uint32 ++sb_gpioled(sb_t *sbh, uint32 mask, uint32 val) ++{ ++ sb_info_t *si; ++ ++ si = SB_INFO(sbh); ++ if (si->sb.ccrev < 16) ++ return -1; ++ ++ /* gpio led powersave reg */ ++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val)); +} + -+static int -+extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++/* mask&set gpio timer val */ ++uint32 ++sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 gpiotimerval) +{ -+ uint32 addr, *reg = NULL, val; -+ int ret = 0; ++ sb_info_t *si; ++ si = SB_INFO(sbh); + -+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) || -+ !(reg = (uint32 *) REG_MAP(addr, len)) || -+ BUSPROBE(val, reg)) -+ val = 0xffffffff; ++ if (si->sb.ccrev < 16) ++ return -1; + -+ val >>= 8 * (off & 3); -+ if (len == 4) -+ *((uint32 *) buf) = val; -+ else if (len == 2) -+ *((uint16 *) buf) = (uint16) val; -+ else if (len == 1) -+ *((uint8 *) buf) = (uint8) val; -+ else -+ ret = -1; ++ return(sb_corereg(si, 0, OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval)); ++} + -+ if (reg) -+ REG_UNMAP(reg); + -+ return ret; ++/* return the slow clock source - LPO, XTAL, or PCI */ ++static uint ++sb_slowclk_src(sb_info_t *si) ++{ ++ chipcregs_t *cc; ++ ++ ++ ASSERT(sb_coreid(&si->sb) == SB_CC); ++ ++ if (si->sb.ccrev < 6) { ++ if ((BUSTYPE(si->sb.bustype) == PCI_BUS) ++ && (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)) & PCI_CFG_GPIO_SCS)) ++ return (SCC_SS_PCI); ++ else ++ return (SCC_SS_XTAL); ++ } else if (si->sb.ccrev < 10) { ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); ++ return (R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK); ++ } else /* Insta-clock */ ++ return (SCC_SS_XTAL); +} + -+static int -+extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++/* return the ILP (slowclock) min or max frequency */ ++static uint ++sb_slowclk_freq(sb_info_t *si, bool max) +{ -+ uint32 addr, *reg = NULL, val; -+ int ret = 0; ++ chipcregs_t *cc; ++ uint32 slowclk; ++ uint div; + -+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) || -+ !(reg = (uint32 *) REG_MAP(addr, len)) || -+ BUSPROBE(val, reg)) -+ goto done; + -+ if (len == 4) -+ val = *((uint32 *) buf); -+ else if (len == 2) { -+ val &= ~(0xffff << (8 * (off & 3))); -+ val |= *((uint16 *) buf) << (8 * (off & 3)); -+ } else if (len == 1) { -+ val &= ~(0xff << (8 * (off & 3))); -+ val |= *((uint8 *) buf) << (8 * (off & 3)); -+ } else -+ ret = -1; ++ ASSERT(sb_coreid(&si->sb) == SB_CC); + -+ W_REG(reg, val); ++ cc = (chipcregs_t*) sb_setcoreidx(&si->sb, si->curidx); + -+ done: -+ if (reg) -+ REG_UNMAP(reg); ++ /* shouldn't be here unless we've established the chip has dynamic clk control */ ++ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); + -+ return ret; ++ slowclk = sb_slowclk_src(si); ++ if (si->sb.ccrev < 6) { ++ if (slowclk == SCC_SS_PCI) ++ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); ++ else ++ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); ++ } else if (si->sb.ccrev < 10) { ++ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); ++ if (slowclk == SCC_SS_LPO) ++ return (max? LPOMAXFREQ : LPOMINFREQ); ++ else if (slowclk == SCC_SS_XTAL) ++ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); ++ else if (slowclk == SCC_SS_PCI) ++ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); ++ else ++ ASSERT(0); ++ } else { ++ /* Chipc rev 10 is InstaClock */ ++ div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT; ++ div = 4 * (div + 1); ++ return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); ++ } ++ return (0); +} + -+/* -+ * Functions for accessing translated SB configuration space -+ */ -+ -+static int -+sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++static void ++sb_clkctl_setdelay(sb_info_t *si, void *chipcregs) +{ -+ pci_config_regs *cfg; ++ chipcregs_t * cc; ++ uint slowmaxfreq, pll_delay, slowclk; ++ uint pll_on_delay, fref_sel_delay; + -+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) -+ return -1; -+ cfg = &sb_config_regs[dev]; ++ pll_delay = PLL_DELAY; + -+ ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED(buf, len)); ++ /* If the slow clock is not sourced by the xtal then add the xtal_on_delay ++ * since the xtal will also be powered down by dynamic clk control logic. ++ */ ++ slowclk = sb_slowclk_src(si); ++ if (slowclk != SCC_SS_XTAL) ++ pll_delay += XTAL_ON_DELAY; + -+ if (len == 4) -+ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off))); -+ else if (len == 2) -+ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off))); -+ else if (len == 1) -+ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off)); -+ else -+ return -1; ++ /* Starting with 4318 it is ILP that is used for the delays */ ++ slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE); + -+ return 0; ++ pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; ++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; ++ ++ cc = (chipcregs_t *)chipcregs; ++ W_REG(&cc->pll_on_delay, pll_on_delay); ++ W_REG(&cc->fref_sel_delay, fref_sel_delay); +} + -+static int -+sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++int ++sb_pwrctl_slowclk(void *sbh, bool set, uint *div) +{ -+ uint coreidx, n; -+ void *regs; -+ sbconfig_t *sb; -+ pci_config_regs *cfg; ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint intr_val = 0; ++ uint err = 0; ++ ++ si = SB_INFO(sbh); + -+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs)) -+ return -1; -+ cfg = &sb_config_regs[dev]; ++ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ ++ if (si->sb.ccrev < 6) ++ return 1; + -+ ASSERT(ISALIGNED(off, len)); -+ ASSERT(ISALIGNED(buf, len)); ++ /* chipcommon cores rev10 are a whole new ball game */ ++ if (si->sb.ccrev >= 10) ++ return 1; + -+ /* Emulate BAR sizing */ -+ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) && -+ len == 4 && *((uint32 *) buf) == ~0) { -+ coreidx = sb_coreidx(sbh); -+ if ((regs = sb_setcoreidx(sbh, dev))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ /* Highest numbered address match register */ -+ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT; -+ if (off == OFFSETOF(pci_config_regs, base[0])) -+ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1); -+ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1) -+ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2) -+ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1); -+ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3) -+ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/ -+ } -+ sb_setcoreidx(sbh, coreidx); -+ return 0; ++ if (set && ((*div % 4) || (*div < 4))) ++ return 2; ++ ++ INTR_OFF(si, intr_val); ++ origidx = si->curidx; ++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); ++ ASSERT(cc != NULL); ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) { ++ err = 3; ++ goto done; + } + -+ if (len == 4) -+ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf)); -+ else if (len == 2) -+ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf)); -+ else if (len == 1) -+ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf); -+ else -+ return -1; ++ if (set) { ++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHIFT)); ++ sb_clkctl_setdelay(sbh, (void *)cc); ++ } else ++ *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); + -+ return 0; ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return err; +} + -+int -+sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) ++/* initialize power control delay registers */ ++void sb_clkctl_init(sb_t *sbh) +{ -+ if (bus == 0) -+ return sb_read_config(sbh, bus, dev, func, off, buf, len); -+ else -+ return extpci_read_config(sbh, bus, dev, func, off, buf, len); -+} ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; + -+int -+sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len) -+{ -+ if (bus == 0) -+ return sb_write_config(sbh, bus, dev, func, off, buf, len); -+ else -+ return extpci_write_config(sbh, bus, dev, func, off, buf, len); -+} ++ si = SB_INFO(sbh); + -+void -+sbpci_ban(uint16 core) ++ origidx = si->curidx; ++ ++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) ++ return; ++ ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; ++ ++ /* set all Instaclk chip ILP to 1 MHz */ ++ if (si->sb.ccrev >= 10) ++ SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ++ ++ sb_clkctl_setdelay(si, (void *)cc); ++ ++done: ++ sb_setcoreidx(sbh, origidx); ++} ++void sb_pwrctl_init(sb_t *sbh) +{ -+ if (pci_banned < ARRAYSIZE(pci_ban)) -+ pci_ban[pci_banned++] = core; ++sb_clkctl_init(sbh); +} -+ -+int __init -+sbpci_init(void *sbh) ++/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ ++uint16 ++sb_clkctl_fast_pwrup_delay(sb_t *sbh) +{ -+ uint chip, chiprev, chippkg, coreidx, host, i; -+ sbpciregs_t *pci; -+ sbconfig_t *sb; -+ pci_config_regs *cfg; -+ void *regs; -+ char varname[8]; -+ uint wlidx = 0; -+ uint16 vendor, core; -+ uint8 class, subclass, progif; -+ uint32 val; -+ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; -+ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint slowminfreq; ++ uint16 fpdelay; ++ uint intr_val = 0; + -+ chip = sb_chip(sbh); -+ chiprev = sb_chiprev(sbh); -+ chippkg = sb_chippkg(sbh); -+ coreidx = sb_coreidx(sbh); ++ si = SB_INFO(sbh); ++ fpdelay = 0; ++ origidx = si->curidx; + -+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) -+ return -1; -+ sb_core_reset(sbh, 0); ++ INTR_OFF(si, intr_val); + -+ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) || -+ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID))) -+ host = 0; -+ else -+ host = !BUSPROBE(val, &pci->control); ++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) ++ goto done; + -+ if (!host) { -+ /* Disable PCI interrupts in client mode */ -+ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF); -+ W_REG(&sb->sbintvec, 0); -+ -+ /* Disable the PCI bridge in client mode */ -+ sbpci_ban(SB_PCI); -+ printf("PCI: Disabled\n"); -+ } else { -+ /* Reset the external PCI bus and enable the clock */ -+ W_REG(&pci->control, 0x5); /* enable the tristate drivers */ -+ W_REG(&pci->control, 0xd); /* enable the PCI clock */ -+ OSL_DELAY(100); /* delay 100 us */ -+ W_REG(&pci->control, 0xf); /* deassert PCI reset */ -+ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */ -+ OSL_DELAY(1); /* delay 1 us */ -+ -+ /* Enable CardBusMode */ -+ cardbus = nvram_match("cardbus", "1"); -+ if (cardbus) { -+ printf("PCI: Enabling CardBus\n"); -+ /* GPIO 1 resets the CardBus device on bcm94710ap */ -+ sb_gpioout(sbh, 1, 1); -+ sb_gpioouten(sbh, 1, 1); -+ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400); -+ } ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; + -+ /* 64 MB I/O access window */ -+ W_REG(&pci->sbtopci0, SBTOPCI_IO); -+ /* 64 MB configuration access window */ -+ W_REG(&pci->sbtopci1, SBTOPCI_CFG0); -+ /* 1 GB memory access window */ -+ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA); ++ slowminfreq = sb_slowclk_freq(si, FALSE); ++ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; + -+ /* Enable PCI bridge BAR0 prefetch and burst */ -+ val = 6; -+ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val)); ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return (fpdelay); ++} ++uint16 sb_pwrctl_fast_pwrup_delay(sb_t *sbh) ++{ ++return sb_clkctl_fast_pwrup_delay(sbh); ++} ++/* turn primary xtal and/or pll off/on */ ++int ++sb_clkctl_xtal(sb_t *sbh, uint what, bool on) ++{ ++ sb_info_t *si; ++ uint32 in, out, outen; + -+ /* Enable PCI interrupts */ -+ W_REG(&pci->intmask, PCI_INTA); -+ } ++ si = SB_INFO(sbh); + -+ /* Scan the SB bus */ -+ bzero(sb_config_regs, sizeof(sb_config_regs)); -+ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) { -+ cfg->vendor = 0xffff; -+ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs))) -+ continue; -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); ++ switch (BUSTYPE(si->sb.bustype)) { ++ case PCI_BUS: + -+ /* Read ID register and parse vendor and core */ -+ val = R_REG(&sb->sbidhigh); -+ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT; -+ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT; -+ progif = 0; ++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); ++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); ++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); + -+ /* Check if this core is banned */ -+ for (i = 0; i < pci_banned; i++) -+ if (core == pci_ban[i]) -+ break; -+ if (i < pci_banned) -+ continue; ++ /* ++ * Avoid glitching the clock if GPRS is already using it. ++ * We can't actually read the state of the PLLPD so we infer it ++ * by the value of XTAL_PU which *is* readable via gpioin. ++ */ ++ if (on && (in & PCI_CFG_GPIO_XTAL)) ++ return (0); + -+ /* Known vendor translations */ -+ switch (vendor) { -+ case SB_VEND_BCM: -+ vendor = VENDOR_BROADCOM; -+ break; -+ } ++ if (what & XTAL) ++ outen |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ outen |= PCI_CFG_GPIO_PLL; ++ ++ if (on) { ++ /* turn primary xtal on */ ++ if (what & XTAL) { ++ out |= PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); ++ OSL_DELAY(XTAL_ON_DELAY); ++ } + -+ /* Determine class based on known core codes */ -+ switch (core) { -+ case SB_ILINE20: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ core = BCM47XX_ILINE_ID; -+ break; -+ case SB_ILINE100: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ core = BCM4610_ILINE_ID; -+ break; -+ case SB_ENET: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_ETHER; -+ core = BCM47XX_ENET_ID; -+ break; -+ case SB_SDRAM: -+ case SB_MEMC: -+ class = PCI_CLASS_MEMORY; -+ subclass = PCI_MEMORY_RAM; -+ break; -+ case SB_PCI: -+ class = PCI_CLASS_BRIDGE; -+ subclass = PCI_BRIDGE_PCI; -+ //break; -+ case SB_MIPS: -+ case SB_MIPS33: -+ class = PCI_CLASS_CPU; -+ subclass = PCI_CPU_MIPS; -+ break; -+ case SB_CODEC: -+ class = PCI_CLASS_COMM; -+ subclass = PCI_COMM_MODEM; -+ core = BCM47XX_V90_ID; -+ break; -+ case SB_USB: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = 0x10; /* OHCI */ -+ core = BCM47XX_USB_ID; -+ break; -+ case SB_USB11H: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ progif = 0x10; /* OHCI */ -+ core = BCM47XX_USBH_ID; -+ break; -+ case SB_USB11D: -+ class = PCI_CLASS_SERIAL; -+ subclass = PCI_SERIAL_USB; -+ core = BCM47XX_USBD_ID; -+ break; -+ case SB_IPSEC: -+ class = PCI_CLASS_CRYPT; -+ subclass = PCI_CRYPT_NETWORK; -+ core = BCM47XX_IPSEC_ID; -+ break; -+ case SB_EXTIF: -+ case SB_CC: -+ class = PCI_CLASS_MEMORY; -+ subclass = PCI_MEMORY_FLASH; -+ break; -+ case SB_D11: -+ class = PCI_CLASS_NET; -+ subclass = PCI_NET_OTHER; -+ /* Let an nvram variable override this */ -+ sprintf(varname, "wl%did", wlidx); -+ wlidx++; -+ if ((core = getintvar(NULL, varname)) == 0) { -+ if (chip == BCM4712_DEVICE_ID) { -+ if (chippkg == BCM4712SMALL_PKG_ID) -+ core = BCM4306_D11G_ID; -+ else -+ core = BCM4306_D11DUAL_ID; -+ } else { -+ /* 4310 */ -+ core = BCM4310_D11B_ID; ++ /* turn pll on */ ++ if (what & PLL) { ++ out &= ~PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_DELAY(2000); + } ++ } else { ++ if (what & XTAL) ++ out &= ~PCI_CFG_GPIO_XTAL; ++ if (what & PLL) ++ out |= PCI_CFG_GPIO_PLL; ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); + } -+ break; + + default: -+ class = subclass = progif = 0xff; -+ break; -+ } -+ -+ /* Supported translations */ -+ cfg->vendor = htol16(vendor); -+ cfg->device = htol16(core); -+ cfg->rev_id = chiprev; -+ cfg->prog_if = progif; -+ cfg->sub_class = subclass; -+ cfg->base_class = class; -+ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0))); -+ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/; -+ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/; -+ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/; -+ cfg->base[4] = 0; -+ cfg->base[5] = 0; -+ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI) -+ cfg->header_type = PCI_HEADER_BRIDGE; -+ else -+ cfg->header_type = PCI_HEADER_NORMAL; -+ /* Save core interrupt flag */ -+ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK; -+ /* Default to MIPS shared interrupt 0 */ -+ cfg->int_line = 0; -+ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */ -+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || -+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) { -+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF); -+ val = R_REG(&sb->sbipsflag); -+ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) { -+ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin) -+ break; -+ } -+ if (cfg->int_line > 4) -+ cfg->int_line = 0; -+ } -+ /* Emulated core */ -+ *((uint32 *) &cfg->sprom_control) = 0xffffffff; ++ return (-1); + } + -+ sb_setcoreidx(sbh, coreidx); -+ return 0; ++ return (0); +} + -+void -+sbpci_check(void *sbh) ++int sb_pwrctl_xtal(sb_t *sbh, uint what, bool on) +{ -+ uint coreidx; -+ sbpciregs_t *pci; -+ uint32 sbtopci1; -+ uint32 buf[64], *ptr, i; -+ ulong pa; -+ volatile uint j; -+ -+ coreidx = sb_coreidx(sbh); -+ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0); -+ -+ /* Clear the test array */ -+ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL); -+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); -+ memset(ptr, 0, sizeof(buf)); -+ -+ /* Point PCI window 1 to memory */ -+ sbtopci1 = R_REG(&pci->sbtopci1); -+ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK)); -+ -+ /* Fill the test array via PCI window 1 */ -+ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf)); -+ for (i = 0; i < ARRAYSIZE(buf); i++) { -+ for (j = 0; j < 2; j++); -+ W_REG(&ptr[i], i); -+ } -+ REG_UNMAP(ptr); ++return sb_clkctl_xtal(sbh,what,on); ++} + -+ /* Restore PCI window 1 */ -+ W_REG(&pci->sbtopci1, sbtopci1); ++/* set dynamic clk control mode (forceslow, forcefast, dynamic) */ ++/* returns true if ignore pll off is set and false if it is not */ ++bool ++sb_clkctl_clk(sb_t *sbh, uint mode) ++{ ++ sb_info_t *si; ++ uint origidx; ++ chipcregs_t *cc; ++ uint32 scc; ++ bool forcefastclk=FALSE; ++ uint intr_val = 0; + -+ /* Check the test array */ -+ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL); -+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]); -+ for (i = 0; i < ARRAYSIZE(buf); i++) { -+ if (ptr[i] != i) -+ break; -+ } ++ si = SB_INFO(sbh); + -+ /* Change the clock if the test fails */ -+ if (i < ARRAYSIZE(buf)) { -+ uint32 req, cur; ++ /* chipcommon cores prior to rev6 don't support dynamic clock control */ ++ if (si->sb.ccrev < 6) ++ return (FALSE); + -+ cur = sb_clock(sbh); -+ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000); -+ for (req = 104000000; req < 176000000; req += 4000000) { -+ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000); -+ /* This will only reset if the clocks are valid and have changed */ -+ sb_mips_setclock(sbh, req, 0, 0); -+ } -+ /* Should not reach here */ -+ ASSERT(0); -+ } ++ /* chipcommon cores rev10 are a whole new ball game */ ++ if (si->sb.ccrev >= 10) ++ return (FALSE); + -+ sb_setcoreidx(sbh, coreidx); -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c ---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200 -@@ -0,0 +1,1895 @@ -+/* -+ * Misc utility routines for accessing chip-specific features -+ * of the SiliconBackplane-based Broadcom chips. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $ -+ */ ++ INTR_OFF(si, intr_val); + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ origidx = si->curidx; + -+/* debug/trace */ -+#define SB_ERROR(args) ++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); ++ ASSERT(cc != NULL); + -+typedef uint32 (*sb_intrsoff_t)(void *intr_arg); -+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); ++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) ++ goto done; + -+/* misc sb info needed by some of the routines */ -+typedef struct sb_info { -+ uint chip; /* chip number */ -+ uint chiprev; /* chip revision */ -+ uint chippkg; /* chip package option */ -+ uint boardtype; /* board type */ -+ uint boardvendor; /* board vendor id */ -+ uint bus; /* what bus type we are going through */ ++ switch (mode) { ++ case CLK_FAST: /* force fast (pll) clock */ ++ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ ++ sb_clkctl_xtal(&si->sb, XTAL, ON); + -+ void *osh; /* osl os handle */ -+ void *sdh; /* bcmsdh handle */ ++ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); ++ break; + -+ void *curmap; /* current regs va */ -+ void *regs[SB_MAXCORES]; /* other regs va */ ++ case CLK_DYNAMIC: /* enable dynamic clock control */ ++ scc = R_REG(&cc->slow_clk_ctl); ++ scc &= ~(SCC_FS | SCC_IP | SCC_XC); ++ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) ++ scc |= SCC_XC; ++ W_REG(&cc->slow_clk_ctl, scc); + -+ uint curidx; /* current core index */ -+ uint dev_coreid; /* the core provides driver functions */ -+ uint pciidx; /* pci core index */ -+ uint pcirev; /* pci core rev */ ++ /* for dynamic control, we have to release our xtal_pu "force on" */ ++ if (scc & SCC_XC) ++ sb_clkctl_xtal(&si->sb, XTAL, OFF); ++ break; + -+ uint pcmciaidx; /* pcmcia core index */ -+ uint pcmciarev; /* pcmcia core rev */ -+ bool memseg; /* flag to toggle MEM_SEG register */ ++ default: ++ ASSERT(0); ++ } + -+ uint ccrev; /* chipc core rev */ ++ /* Is the h/w forcing the use of the fast clk */ ++ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); + -+ uint gpioidx; /* gpio control core index */ -+ uint gpioid; /* gpio control coretype */ ++done: ++ sb_setcoreidx(sbh, origidx); ++ INTR_RESTORE(si, intr_val); ++ return (forcefastclk); ++} + -+ uint numcores; /* # discovered cores */ -+ uint coreid[SB_MAXCORES]; /* id of each core */ ++bool sb_pwrctl_clk(sb_t *sbh, uint mode) ++{ ++return sb_clkctl_clk(sbh, mode); ++} ++/* register driver interrupt disabling and restoring callback functions */ ++void ++sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg) ++{ ++ sb_info_t *si; + -+ void *intr_arg; /* interrupt callback function arg */ -+ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ -+ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ -+} sb_info_t; ++ si = SB_INFO(sbh); ++ si->intr_arg = intr_arg; ++ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; ++ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; ++ si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn; ++ /* save current core id. when this function called, the current core ++ * must be the core which provides driver functions(il, et, wl, etc.) ++ */ ++ si->dev_coreid = si->coreid[si->curidx]; ++} + -+/* local prototypes */ -+static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); -+static void sb_scan(sb_info_t *si); -+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val); -+static uint _sb_coreidx(void *sbh); -+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit); -+static uint sb_pcidev2chip(uint pcidev); -+static uint sb_chip2numcores(uint chip); + -+#define SB_INFO(sbh) (sb_info_t*)sbh -+#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) -+#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \ -+ && ISALIGNED((x), SB_CORE_SIZE)) -+#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE)) -+#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF) -+#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) -+#define BADIDX (SB_MAXCORES+1) ++void ++sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif) ++{ ++ uint vendor, core, unit; ++ uint chip, chippkg; ++ char varname[8]; ++ uint8 class, subclass, progif; ++ ++ vendor = sb_corevendor(sbh); ++ core = sb_coreid(sbh); ++ unit = sb_coreunit(sbh); + -+#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) -+#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) -+#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) -+#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) ++ chip = BCMINIT(sb_chip)(sbh); ++ chippkg = BCMINIT(sb_chippkg)(sbh); + -+/* -+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ -+ * after core switching to avoid invalid register accesss inside ISR. -+ */ -+#define INTR_OFF(si, intr_val) \ -+ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ -+ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } -+#define INTR_RESTORE(si, intr_val) \ -+ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ -+ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } ++ progif = 0; ++ ++ /* Known vendor translations */ ++ switch (vendor) { ++ case SB_VEND_BCM: ++ vendor = VENDOR_BROADCOM; ++ break; ++ } + -+/* power control defines */ -+#define PLL_DELAY 150 /* 150us pll on delay */ -+#define FREF_DELAY 15 /* 15us fref change delay */ -+#define LPOMINFREQ 25000 /* low power oscillator min */ -+#define LPOMAXFREQ 43000 /* low power oscillator max */ -+#define XTALMINFREQ 19800000 /* 20mhz - 1% */ -+#define XTALMAXFREQ 20200000 /* 20mhz + 1% */ -+#define PCIMINFREQ 25000000 /* 25mhz */ -+#define PCIMAXFREQ 34000000 /* 33mhz + fudge */ ++ /* Determine class based on known core codes */ ++ switch (core) { ++ case SB_ILINE20: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ILINE_ID; ++ break; ++ case SB_ENET: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_ETHER; ++ core = BCM47XX_ENET_ID; ++ break; ++ case SB_SDRAM: ++ case SB_MEMC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_RAM; ++ break; ++ case SB_PCI: ++ class = PCI_CLASS_BRIDGE; ++ subclass = PCI_BRIDGE_PCI; ++ break; ++ case SB_MIPS: ++ case SB_MIPS33: ++ class = PCI_CLASS_CPU; ++ subclass = PCI_CPU_MIPS; ++ break; ++ case SB_CODEC: ++ class = PCI_CLASS_COMM; ++ subclass = PCI_COMM_MODEM; ++ core = BCM47XX_V90_ID; ++ break; ++ case SB_USB: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USB_ID; ++ break; ++ case SB_USB11H: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ progif = 0x10; /* OHCI */ ++ core = BCM47XX_USBH_ID; ++ break; ++ case SB_USB11D: ++ class = PCI_CLASS_SERIAL; ++ subclass = PCI_SERIAL_USB; ++ core = BCM47XX_USBD_ID; ++ break; ++ case SB_IPSEC: ++ class = PCI_CLASS_CRYPT; ++ subclass = PCI_CRYPT_NETWORK; ++ core = BCM47XX_IPSEC_ID; ++ break; ++ case SB_ROBO: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ core = BCM47XX_ROBO_ID; ++ break; ++ case SB_EXTIF: ++ case SB_CC: ++ class = PCI_CLASS_MEMORY; ++ subclass = PCI_MEMORY_FLASH; ++ break; ++ case SB_D11: ++ class = PCI_CLASS_NET; ++ subclass = PCI_NET_OTHER; ++ /* Let an nvram variable override this */ ++ sprintf(varname, "wl%did", unit); ++ if ((core = getintvar(NULL, varname)) == 0) { ++ if (chip == BCM4712_DEVICE_ID) { ++ if (chippkg == BCM4712SMALL_PKG_ID) ++ core = BCM4306_D11G_ID; ++ else ++ core = BCM4306_D11DUAL_ID; ++ } ++ } ++ break; + -+#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */ ++ default: ++ class = subclass = progif = 0xff; ++ break; ++ } + ++ *pcivendor = (uint16)vendor; ++ *pcidevice = (uint16)core; ++ *pciclass = class; ++ *pcisubclass = subclass; ++ *pciprogif = progif; ++} + -+static uint32 -+sb_read_sbreg(void *sbh, volatile uint32 *sbr) ++#if 0 ++/* Build device path. Support SB, PCI, and JTAG for now. */ ++int ++sb_devpath(sb_t *sbh, char *path, int size) +{ -+ sb_info_t *si; -+ uint8 tmp; -+ uint32 val, intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ -+ /* -+ * compact flash only has 11 bits address, while we needs 12 bits address. -+ * MEM_SEG will be OR'd with other 11 bits address in hardware, -+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). -+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special -+ */ -+ if(si->memseg) { -+ INTR_OFF(si, intr_val); -+ tmp = 1; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/ -+ } -+ -+ val = R_REG(sbr); ++ ASSERT(path); ++ ASSERT(size >= SB_DEVPATH_BUFSZ); + -+ if(si->memseg) { -+ tmp = 0; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ INTR_RESTORE(si, intr_val); ++ switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) { ++ case SB_BUS: ++ case JTAG_BUS: ++ sprintf(path, "sb/%u/", sb_coreidx(sbh)); ++ break; ++ case PCI_BUS: ++ ASSERT((SB_INFO(sbh))->osh); ++ sprintf(path, "pci/%u/%u/", OSL_PCI_BUS((SB_INFO(sbh))->osh), ++ PCI_SLOT(((struct pci_dev *)(SB_INFO(sbh))->osh)->pdev)->devfn); ++ break; ++ case SDIO_BUS: ++ SB_ERROR(("sb_devpath: device 0 assumed\n")); ++ sprintf(path, "sd/%u/", sb_coreidx(sbh)); ++ break; ++ default: ++ ASSERT(0); ++ break; + } + -+ return (val); ++ return 0; +} ++#endif + -+static void -+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v) ++/* Fix chip's configuration. The current core may be changed upon return */ ++static int ++sb_pci_fixcfg(sb_info_t *si) +{ -+ sb_info_t *si; -+ uint8 tmp; -+ volatile uint32 dummy; -+ uint32 intr_val = 0; ++ uint origidx, pciidx; ++ sbpciregs_t *pciregs; ++ uint16 val16, *reg16; ++ char name[SB_DEVPATH_BUFSZ+16], *value; ++ char devpath[SB_DEVPATH_BUFSZ]; + -+ si = SB_INFO(sbh); ++ ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS); + -+ /* -+ * compact flash only has 11 bits address, while we needs 12 bits address. -+ * MEM_SEG will be OR'd with other 11 bits address in hardware, -+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). -+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special -+ */ -+ if(si->memseg) { -+ INTR_OFF(si, intr_val); -+ tmp = 1; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */ ++ /* Fix PCI(e) SROM shadow area */ ++ /* save the current index */ ++ origidx = sb_coreidx(&si->sb); ++ ++ if (si->sb.buscoretype == SB_PCI) { ++ pciregs = (sbpciregs_t *)sb_setcore(&si->sb, SB_PCI, 0); ++ ASSERT(pciregs); ++ reg16 = &pciregs->sprom[SRSH_PI_OFFSET]; ++ } ++ else { ++ ASSERT(0); ++ return -1; ++ } ++ pciidx = sb_coreidx(&si->sb); ++ val16 = R_REG(reg16); ++ if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16)pciidx) { ++ val16 = (uint16)(pciidx << SRSH_PI_SHIFT) | (val16 & ~SRSH_PI_MASK); ++ W_REG(reg16, val16); + } + -+ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) { -+#ifdef IL_BIGENDIAN -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+#else -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); -+ dummy = R_REG(sbr); -+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); -+#endif -+ } else -+ W_REG(sbr, v); ++ /* restore the original index */ ++ sb_setcoreidx(&si->sb, origidx); + -+ if(si->memseg) { -+ tmp = 0; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); -+ INTR_RESTORE(si, intr_val); ++#if 0 ++ /* Fix bar0window */ ++ /* !do it last, it changes the current core! */ ++ if (sb_devpath(&si->sb, devpath, sizeof(devpath))) ++ return -1; ++ sprintf(name, "%sb0w", devpath); ++ if ((value = getvar(NULL, name))) { ++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32), ++ bcm_strtoul(value, NULL, 16)); ++ /* update curidx since the current core is changed */ ++ si->curidx = _sb_coreidx(si); ++ if (si->curidx == BADIDX) { ++ SB_ERROR(("sb_pci_fixcfg: bad core index\n")); ++ return -1; ++ } + } ++#endif ++ ++ return 0; +} + +diff -urN linux.old/arch/mips/bcm947xx/broadcom/sflash.c linux.dev/arch/mips/bcm947xx/broadcom/sflash.c +--- linux.old/arch/mips/bcm947xx/broadcom/sflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/broadcom/sflash.c 2005-12-15 16:59:20.045933750 +0100 +@@ -0,0 +1,418 @@ +/* -+ * Allocate a sb handle. -+ * devid - pci device id (used to determine chip#) -+ * osh - opaque OS handle -+ * regs - virtual address of initial core registers -+ * bustype - pci/pcmcia/sb/sdio/etc -+ * vars - pointer to a pointer area for "environment" variables -+ * varsz - pointer to int to return the size of the vars ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ -+void* -+sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) -+{ -+ sb_info_t *si; + -+ /* alloc sb_info_t */ -+ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) { -+ SB_ERROR(("sb_attach: malloc failed!\n")); -+ return (NULL); -+ } ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz)); -+} ++/* Private global state */ ++static struct sflash sflash; + -+/* global kernel resource */ -+static sb_info_t ksi; ++/* Issue a serial flash command */ ++static INLINE void ++sflash_cmd(chipcregs_t *cc, uint opcode) ++{ ++ W_REG(&cc->flashcontrol, SFLASH_START | opcode); ++ while (R_REG(&cc->flashcontrol) & SFLASH_BUSY); ++} + -+/* generic kernel variant of sb_attach() */ -+void* -+sb_kattach() ++/* Initialize serial flash access */ ++struct sflash * ++sflash_init(chipcregs_t *cc) +{ -+ uint32 *regs; -+ char *unused; -+ int varsz; ++ uint32 id, id2; + -+ if (ksi.curmap == NULL) { -+ uint32 cid; -+ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); -+ cid = R_REG((uint32 *)regs); -+ if ((cid == 0x08104712) || (cid == 0x08114712)) { -+ uint32 *scc, val; ++ bzero(&sflash, sizeof(sflash)); + -+ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); -+ val = R_REG(scc); -+ SB_ERROR((" initial scc = 0x%x\n", val)); -+ val |= SCC_SS_XTAL; -+ W_REG(scc, val); ++ sflash.type = R_REG(&cc->capabilities) & CAP_FLASH_MASK; ++ ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Probe for ST chips */ ++ sflash_cmd(cc, SFLASH_ST_DP); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id = R_REG(&cc->flashdata); ++ switch (id) { ++ case 0x11: ++ /* ST M25P20 2 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 4; ++ break; ++ case 0x12: ++ /* ST M25P40 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ break; ++ case 0x13: ++ /* ST M25P80 8 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 16; ++ break; ++ case 0x14: ++ /* ST M25P16 16 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 32; ++ break; ++ case 0x15: ++ /* ST M25P32 32 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 64; ++ break; ++ case 0xbf: ++ W_REG(&cc->flashaddress, 1); ++ sflash_cmd(cc, SFLASH_ST_RES); ++ id2 = R_REG(&cc->flashdata); ++ if (id2 == 0x44) { ++ /* SST M25VF80 4 Mbit Serial Flash */ ++ sflash.blocksize = 64 * 1024; ++ sflash.numblocks = 8; ++ } ++ break; + } ++ break; + -+ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, -+ SB_BUS, NULL, &unused, &varsz); ++ case SFLASH_AT: ++ /* Probe for Atmel chips */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ id = R_REG(&cc->flashdata) & 0x3c; ++ switch (id) { ++ case 0xc: ++ /* Atmel AT45DB011 1Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 512; ++ break; ++ case 0x14: ++ /* Atmel AT45DB021 2Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 1024; ++ break; ++ case 0x1c: ++ /* Atmel AT45DB041 4Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 2048; ++ break; ++ case 0x24: ++ /* Atmel AT45DB081 8Mbit Serial Flash */ ++ sflash.blocksize = 256; ++ sflash.numblocks = 4096; ++ break; ++ case 0x2c: ++ /* Atmel AT45DB161 16Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 4096; ++ break; ++ case 0x34: ++ /* Atmel AT45DB321 32Mbit Serial Flash */ ++ sflash.blocksize = 512; ++ sflash.numblocks = 8192; ++ break; ++ case 0x3c: ++ /* Atmel AT45DB642 64Mbit Serial Flash */ ++ sflash.blocksize = 1024; ++ sflash.numblocks = 8192; ++ break; ++ } ++ break; + } + -+ return &ksi; ++ sflash.size = sflash.blocksize * sflash.numblocks; ++ return sflash.size ? &sflash : NULL; +} + -+static void* -+sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) ++/* Read len bytes starting at offset into buf. Returns number of bytes read. */ ++int ++sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf) +{ -+ uint origidx; -+ chipcregs_t *cc; -+ uint32 w; -+ -+ ASSERT(GOODREGS(regs)); ++ int cnt; ++ uint32 *from, *to; + -+ bzero((uchar*)si, sizeof (sb_info_t)); ++ if (!len) ++ return 0; + -+ si->pciidx = si->gpioidx = BADIDX; ++ if ((offset + len) > sflash.size) ++ return -22; + -+ si->osh = osh; -+ si->curmap = regs; -+ si->sdh = sdh; ++ if ((len >= 4) && (offset & 3)) ++ cnt = 4 - (offset & 3); ++ else if ((len >= 4) && ((uint32)buf & 3)) ++ cnt = 4 - ((uint32)buf & 3); ++ else ++ cnt = len; + -+ /* 4317A0 PCMCIA is no longer supported */ -+ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317)) -+ return NULL; ++ from = (uint32 *)KSEG1ADDR(SB_FLASH2 + offset); ++ to = (uint32 *)buf; + -+ /* check to see if we are a sb core mimic'ing a pci core */ -+ if (bustype == PCI_BUS) { -+ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) -+ bustype = SB_BUS; -+ else -+ bustype = PCI_BUS; ++ if (cnt < 4) { ++ bcopy(from, to, cnt); ++ return cnt; + } + -+ si->bus = bustype; -+ -+ /* kludge to enable the clock on the 4306 which lacks a slowclock */ -+ if (si->bus == PCI_BUS) -+ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON); -+ -+ /* clear any previous epidiag-induced target abort */ -+ sb_taclear((void*)si); ++ while (cnt >= 4) { ++ *to++ = *from++; ++ cnt -= 4; ++ } + -+ /* initialize current core index value */ -+ si->curidx = _sb_coreidx((void*)si); ++ return (len - cnt); ++} + -+ /* keep and reuse the initial register mapping */ -+ origidx = si->curidx; -+ if (si->bus == SB_BUS) -+ si->regs[origidx] = regs; ++/* Poll for command completion. Returns zero when complete. */ ++int ++sflash_poll(chipcregs_t *cc, uint offset) ++{ ++ if (offset >= sflash.size) ++ return -22; + -+ /* initialize the vars */ -+ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) { -+ SB_ERROR(("sb_attach: srom_var_init failed\n")); -+ goto bad; -+ } -+ -+ if (si->bus == PCMCIA_BUS) { -+ w = getintvar(*vars, "regwindowsz"); -+ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE; ++ switch (sflash.type) { ++ case SFLASH_ST: ++ /* Check for ST Write In Progress bit */ ++ sflash_cmd(cc, SFLASH_ST_RDSR); ++ return R_REG(&cc->flashdata) & SFLASH_ST_WIP; ++ case SFLASH_AT: ++ /* Check for Atmel Ready bit */ ++ sflash_cmd(cc, SFLASH_AT_STATUS); ++ return !(R_REG(&cc->flashdata) & SFLASH_AT_READY); + } + -+ /* is core-0 a chipcommon core? */ -+ si->numcores = 1; -+ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0); -+ if (sb_coreid((void*)si) != SB_CC) -+ cc = NULL; ++ return 0; ++} + -+ /* determine chip id and rev */ -+ if (cc) { -+ /* chip common core found! */ -+ si->chip = R_REG(&cc->chipid) & CID_ID_MASK; -+ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; -+ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; -+ } else { -+ /* without chip common core, get devid for PCMCIA */ -+ if (si->bus == PCMCIA_BUS) -+ devid = getintvar(*vars, "devid"); ++/* Write len bytes starting at offset into buf. Returns number of bytes ++ * written. Caller should poll for completion. ++ */ ++int ++sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++{ ++ struct sflash *sfl; ++ int ret = 0; ++ bool is4712b0; ++ uint32 page, byte, mask; + -+ /* no chip common core -- must convert device id to chip id */ -+ if ((si->chip = sb_pcidev2chip(devid)) == 0) { -+ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid)); -+ goto bad; -+ } ++ if (!len) ++ return 0; + -+ /* -+ * The chip revision number is hardwired into all -+ * of the pci function config rev fields and is -+ * independent from the individual core revision numbers. -+ * For example, the "A0" silicon of each chip is chip rev 0. -+ * For PCMCIA we get it from the CIS instead. -+ */ -+ if (si->bus == PCMCIA_BUS) { -+ ASSERT(vars); -+ si->chiprev = getintvar(*vars, "chiprev"); -+ } else if (si->bus == PCI_BUS) { -+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); -+ si->chiprev = w & 0xff; -+ } else -+ si->chiprev = 0; ++ if ((offset + len) > sflash.size) ++ return -22; ++ ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ mask = R_REG(&cc->chipid); ++ is4712b0 = (((mask & CID_ID_MASK) == BCM4712_DEVICE_ID) && ++ ((mask & CID_REV_MASK) == (3 << CID_REV_SHIFT))); ++ /* Enable writes */ ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ if (is4712b0) { ++ mask = 1 << 14; ++ W_REG(&cc->flashaddress, offset); ++ W_REG(&cc->flashdata, *buf++); ++ /* Set chip select */ ++ OR_REG(&cc->gpioout, mask); ++ /* Issue a page program with the first byte */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ ret = 1; ++ offset++; ++ len--; ++ while (len > 0) { ++ if ((offset & 255) == 0) { ++ /* Page boundary, drop cs and return */ ++ AND_REG(&cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -11; ++ } ++ return ret; ++ } else { ++ /* Write single byte */ ++ sflash_cmd(cc, *buf++); ++ } ++ ret++; ++ offset++; ++ len--; ++ } ++ /* All done, drop cs if needed */ ++ if ((offset & 255) != 1) { ++ /* Drop cs */ ++ AND_REG(&cc->gpioout, ~mask); ++ if (!sflash_poll(cc, offset)) { ++ /* Flash rejected command */ ++ return -12; ++ } ++ } ++ } else { ++ ret = 1; ++ W_REG(&cc->flashaddress, offset); ++ W_REG(&cc->flashdata, *buf); ++ /* Page program */ ++ sflash_cmd(cc, SFLASH_ST_PP); ++ } ++ break; ++ case SFLASH_AT: ++ mask = sfl->blocksize - 1; ++ page = (offset & ~mask) << 1; ++ byte = offset & mask; ++ /* Read main memory page into buffer 1 */ ++ if (byte || len < sfl->blocksize) { ++ W_REG(&cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_LOAD); ++ /* 250 us for AT45DB321B */ ++ SPINWAIT(sflash_poll(cc, offset), 1000); ++ ASSERT(!sflash_poll(cc, offset)); ++ } ++ /* Write into buffer 1 */ ++ for (ret = 0; ret < len && byte < sfl->blocksize; ret++) { ++ W_REG(&cc->flashaddress, byte++); ++ W_REG(&cc->flashdata, *buf++); ++ sflash_cmd(cc, SFLASH_AT_BUF1_WRITE); ++ } ++ /* Write buffer 1 into main memory page */ ++ W_REG(&cc->flashaddress, page); ++ sflash_cmd(cc, SFLASH_AT_BUF1_PROGRAM); ++ break; + } + -+ /* get chipcommon rev */ -+ si->ccrev = cc? sb_corerev((void*)si) : 0; -+ -+ /* determine numcores */ -+ if ((si->ccrev == 4) || (si->ccrev >= 6)) -+ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; -+ else -+ si->numcores = sb_chip2numcores(si->chip); -+ -+ /* return to original core */ -+ sb_setcoreidx((void*)si, origidx); ++ return ret; ++} + -+ /* sanity checks */ -+ ASSERT(si->chip); -+ /* 4704A1 is chiprev 8 :-( */ -+ ASSERT((si->chiprev < 8) || -+ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8)))); ++/* Erase a region. Returns number of bytes scheduled for erasure. ++ * Caller should poll for completion. ++ */ ++int ++sflash_erase(chipcregs_t *cc, uint offset) ++{ ++ struct sflash *sfl; + -+ /* scan for cores */ -+ sb_scan(si); ++ if (offset >= sflash.size) ++ return -22; + -+ /* pci core is required */ -+ if (!GOODIDX(si->pciidx)) { -+ SB_ERROR(("sb_attach: pci core not found\n")); -+ goto bad; ++ sfl = &sflash; ++ switch (sfl->type) { ++ case SFLASH_ST: ++ sflash_cmd(cc, SFLASH_ST_WREN); ++ W_REG(&cc->flashaddress, offset); ++ sflash_cmd(cc, SFLASH_ST_SE); ++ return sfl->blocksize; ++ case SFLASH_AT: ++ W_REG(&cc->flashaddress, offset << 1); ++ sflash_cmd(cc, SFLASH_AT_PAGE_ERASE); ++ return sfl->blocksize; + } + -+ /* gpio control core is required */ -+ if (!GOODIDX(si->gpioidx)) { -+ SB_ERROR(("sb_attach: gpio control core not found\n")); -+ goto bad; -+ } ++ return 0; ++} + -+ /* get boardtype and boardrev */ -+ switch (si->bus) { -+ case PCI_BUS: -+ /* do a pci config read to get subsystem id and subvendor id */ -+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); -+ si->boardvendor = w & 0xffff; -+ si->boardtype = (w >> 16) & 0xffff; -+ break; ++/* ++ * writes the appropriate range of flash, a NULL buf simply erases ++ * the region of flash ++ */ ++int ++sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf) ++{ ++ struct sflash *sfl; ++ uchar *block = NULL, *cur_ptr, *blk_ptr; ++ uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder; ++ uint blk_offset, blk_len, copied; ++ int bytes, ret = 0; + -+ case PCMCIA_BUS: -+ case SDIO_BUS: -+ si->boardvendor = getintvar(*vars, "manfid"); -+ si->boardtype = getintvar(*vars, "prodid"); -+ break; ++ /* Check address range */ ++ if (len <= 0) ++ return 0; + -+ case SB_BUS: -+ si->boardvendor = VENDOR_BROADCOM; -+ si->boardtype = 0xffff; -+ break; -+ } ++ sfl = &sflash; ++ if ((offset + len) > sfl->size) ++ return -1; + -+ if (si->boardtype == 0) { -+ SB_ERROR(("sb_attach: unknown board type\n")); -+ ASSERT(si->boardtype); -+ } ++ blocksize = sfl->blocksize; ++ mask = blocksize - 1; + -+ return ((void*)si); ++ /* Allocate a block of mem */ ++ if (!(block = MALLOC(NULL, blocksize))) ++ return -1; + -+bad: -+ MFREE(si, sizeof (sb_info_t)); -+ return (NULL); -+} ++ while (len) { ++ /* Align offset */ ++ cur_offset = offset & ~mask; ++ cur_length = blocksize; ++ cur_ptr = block; + -+uint -+sb_coreid(void *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; ++ remainder = blocksize - (offset & mask); ++ if (len < remainder) ++ cur_retlen = len; ++ else ++ cur_retlen = remainder; ++ ++ /* buf == NULL means erase only */ ++ if (buf) { ++ /* Copy existing data into holding block if necessary */ ++ if ((offset & mask) || (len < blocksize)) { ++ blk_offset = cur_offset; ++ blk_len = cur_length; ++ blk_ptr = cur_ptr; ++ ++ /* Copy entire block */ ++ while(blk_len) { ++ copied = sflash_read(cc, blk_offset, blk_len, blk_ptr); ++ blk_offset += copied; ++ blk_len -= copied; ++ blk_ptr += copied; ++ } ++ } + -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); ++ /* Copy input data into holding block */ ++ memcpy(cur_ptr + (offset & mask), buf, cur_retlen); ++ } + -+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); -+} ++ /* Erase block */ ++ if ((ret = sflash_erase(cc, (uint) cur_offset)) < 0) ++ goto done; ++ while (sflash_poll(cc, (uint) cur_offset)); + -+uint -+sb_coreidx(void *sbh) -+{ -+ sb_info_t *si; ++ /* buf == NULL means erase only */ ++ if (!buf) { ++ offset += cur_retlen; ++ len -= cur_retlen; ++ continue; ++ } + -+ si = SB_INFO(sbh); -+ return (si->curidx); ++ /* Write holding block */ ++ while (cur_length > 0) { ++ if ((bytes = sflash_write(cc, ++ (uint) cur_offset, ++ (uint) cur_length, ++ (uchar *) cur_ptr)) < 0) { ++ ret = bytes; ++ goto done; ++ } ++ while (sflash_poll(cc, (uint) cur_offset)); ++ cur_offset += bytes; ++ cur_length -= bytes; ++ cur_ptr += bytes; ++ } ++ ++ offset += cur_retlen; ++ len -= cur_retlen; ++ buf += cur_retlen; ++ } ++ ++ ret = len; ++done: ++ if (block) ++ MFREE(NULL, block, blocksize); ++ return ret; +} + -+/* return current index of core */ -+static uint -+_sb_coreidx(void *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ uint32 sbaddr = 0; +diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h +--- linux.old/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h 2005-12-15 15:25:24.905340500 +0100 +@@ -0,0 +1,391 @@ ++/* ++ * Broadcom device-specific manifest constants. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+ si = SB_INFO(sbh); -+ ASSERT(si); ++#ifndef _BCMDEVS_H ++#define _BCMDEVS_H + -+ switch (si->bus) { -+ case SB_BUS: -+ sb = REGS2SB(si->curmap); -+ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0)); -+ break; + -+ case PCI_BUS: -+ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); -+ break; ++/* Known PCI vendor Id's */ ++#define VENDOR_EPIGRAM 0xfeda ++#define VENDOR_BROADCOM 0x14e4 ++#define VENDOR_3COM 0x10b7 ++#define VENDOR_NETGEAR 0x1385 ++#define VENDOR_DIAMOND 0x1092 ++#define VENDOR_DELL 0x1028 ++#define VENDOR_HP 0x0e11 ++#define VENDOR_APPLE 0x106b + -+ case PCMCIA_BUS: { -+ uint8 tmp; ++/* PCI Device Id's */ ++#define BCM4210_DEVICE_ID 0x1072 /* never used */ ++#define BCM4211_DEVICE_ID 0x4211 ++#define BCM4230_DEVICE_ID 0x1086 /* never used */ ++#define BCM4231_DEVICE_ID 0x4231 + -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); -+ sbaddr = (uint)tmp << 12; -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); -+ sbaddr |= (uint)tmp << 16; -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); -+ sbaddr |= (uint)tmp << 24; -+ break; -+ } -+ default: -+ ASSERT(0); -+ } ++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ ++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ ++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ ++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ + -+ ASSERT(GOODCOREADDR(sbaddr)); -+ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE); -+} ++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ ++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ + -+uint -+sb_corevendor(void *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; ++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ ++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ + -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); ++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ ++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ ++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ ++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ ++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ ++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ ++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ ++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */ ++#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */ ++#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */ + -+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); -+} ++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ + -+uint -+sb_corerev(void *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; ++#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ ++#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ ++#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ ++#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ ++#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ ++#define BCM4610_USB_ID 0x4615 /* 4610 usb */ + -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); ++#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ ++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ ++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */ + -+ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK); -+} ++#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ ++#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ + -+#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) ++#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ ++#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ ++#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ ++#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ + -+/* set/clear sbtmstatelow core-specific flags */ -+uint32 -+sb_coreflags(void *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ uint32 w; ++#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ ++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ ++#define BCM4306_D11G_ID2 0x4325 ++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ ++#define BCM4306_UART_ID 0x4322 /* 4306 uart */ ++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ ++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ + -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); ++#define BCM4309_PKG_ID 1 /* 4309 package id */ + -+ ASSERT((val & ~mask) == 0); -+ ASSERT((mask & ~SBTML_ALLOW) == 0); ++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ ++#define BCM4303_PKG_ID 2 /* 4303 package id */ + -+ /* mask and set */ -+ if (mask || val) { -+ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val; -+ W_SBREG(sbh, &sb->sbtmstatelow, w); -+ } ++#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ ++#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ ++#define BCM4310_UART_ID 0x4312 /* 4310 uart */ ++#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ ++#define BCM4310_USB_ID 0x4315 /* 4310 usb */ + -+ /* return the new value */ -+ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW); -+} ++#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */ ++#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */ + -+/* set/clear sbtmstatehigh core-specific flags */ -+uint32 -+sb_coreflagshi(void *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ uint32 w; + -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); ++#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ ++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ + -+ ASSERT((val & ~mask) == 0); -+ ASSERT((mask & ~SBTMH_FL_MASK) == 0); ++#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ + -+ /* mask and set */ -+ if (mask || val) { -+ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val; -+ W_SBREG(sbh, &sb->sbtmstatehigh, w); -+ } ++#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */ ++#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */ ++#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */ ++#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */ + -+ /* return the new value */ -+ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK); -+} ++#define FPGA_JTAGM_ID 0x4330 /* ??? */ + -+bool -+sb_iscoreup(void *sbh) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; ++/* Address map */ ++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ ++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ ++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ ++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ ++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ + -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); ++/* Core register space */ ++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ ++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ ++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ ++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ ++#define BCM4710_REG_USB 0x18004000 /* USB core registers */ ++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ ++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ ++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ ++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ ++ ++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ ++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ ++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ ++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ ++#define BCM4710_PROG 0x1f800000 /* Programable interface */ ++#define BCM4710_FLASH 0x1fc00000 /* Flash */ ++ ++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ ++ ++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) ++ ++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) ++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) + -+ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK); -+} ++#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ ++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ ++#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */ ++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */ + -+/* -+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, -+ * switch back to the original core, and return the new value. -+ */ -+static uint -+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val) -+{ -+ sb_info_t *si; -+ uint origidx; -+ uint32 *r; -+ uint w; -+ uint intr_val = 0; ++#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ + -+ ASSERT(GOODIDX(coreidx)); -+ ASSERT(regoff < SB_CORE_SIZE); -+ ASSERT((val & ~mask) == 0); ++#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ ++#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */ ++#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */ + -+ si = SB_INFO(sbh); ++#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */ + -+ /* save current core index */ -+ origidx = sb_coreidx(sbh); ++/* PCMCIA vendor Id's */ + -+ /* switch core */ -+ INTR_OFF(si, intr_val); -+ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff); ++#define VENDOR_BROADCOM_PCMCIA 0x02d0 + -+ /* mask and set */ -+ if (mask || val) { -+ if (regoff >= SBCONFIGOFF) { -+ w = (R_SBREG(sbh, r) & ~mask) | val; -+ W_SBREG(sbh, r, w); -+ } else { -+ w = (R_REG(r) & ~mask) | val; -+ W_REG(r, w); -+ } -+ } ++/* SDIO vendor Id's */ ++#define VENDOR_BROADCOM_SDIO 0x00BF + -+ /* readback */ -+ w = R_SBREG(sbh, r); + -+ /* restore core index */ -+ if (origidx != coreidx) -+ sb_setcoreidx(sbh, origidx); ++/* boardflags */ ++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ ++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ ++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ ++#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */ ++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ ++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ ++#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */ ++#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */ ++#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */ ++#define BFL_FEM 0x0800 /* This board supports the Front End Module */ ++#define BFL_EXTLNA 0x1000 /* This board has an external LNA */ ++#define BFL_HGPA 0x2000 /* This board has a high gain PA */ ++#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */ ++#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */ + -+ INTR_RESTORE(si, intr_val); -+ return (w); -+} ++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ ++#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ ++#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */ ++#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */ ++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ ++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ ++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ ++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ ++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ ++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ ++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + -+/* scan the sb enumerated space to identify all cores */ -+static void -+sb_scan(sb_info_t *si) -+{ -+ void *sbh; -+ uint origidx; -+ uint i; ++/* Bus types */ ++#define SB_BUS 0 /* Silicon Backplane */ ++#define PCI_BUS 1 /* PCI target */ ++#define PCMCIA_BUS 2 /* PCMCIA target */ ++#define SDIO_BUS 3 /* SDIO target */ ++#define JTAG_BUS 4 /* JTAG */ + -+ sbh = (void*) si; ++/* Allows optimization for single-bus support */ ++#ifdef BCMBUSTYPE ++#define BUSTYPE(bus) (BCMBUSTYPE) ++#else ++#define BUSTYPE(bus) (bus) ++#endif + -+ /* numcores should already be set */ -+ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); ++/* power control defines */ ++#define PLL_DELAY 150 /* us pll on delay */ ++#define FREF_DELAY 200 /* us fref change delay */ ++#define MIN_SLOW_CLK 32 /* us Slow clock period */ ++#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ + -+ /* save current core index */ -+ origidx = sb_coreidx(sbh); ++/* Reference Board Types */ + -+ si->pciidx = si->gpioidx = BADIDX; ++#define BU4710_BOARD 0x0400 ++#define VSIM4710_BOARD 0x0401 ++#define QT4710_BOARD 0x0402 + -+ for (i = 0; i < si->numcores; i++) { -+ sb_setcoreidx(sbh, i); -+ si->coreid[i] = sb_coreid(sbh); ++#define BU4610_BOARD 0x0403 ++#define VSIM4610_BOARD 0x0404 + -+ if (si->coreid[i] == SB_CC) -+ si->ccrev = sb_corerev(sbh); ++#define BU4307_BOARD 0x0405 ++#define BCM94301CB_BOARD 0x0406 ++#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ ++#define BCM94301MP_BOARD 0x0407 ++#define BCM94307MP_BOARD 0x0408 ++#define BCMAP4307_BOARD 0x0409 + -+ else if (si->coreid[i] == SB_PCI) { -+ si->pciidx = i; -+ si->pcirev = sb_corerev(sbh); ++#define BU4309_BOARD 0x040a ++#define BCM94309CB_BOARD 0x040b ++#define BCM94309MP_BOARD 0x040c ++#define BCM4309AP_BOARD 0x040d + -+ }else if (si->coreid[i] == SB_PCMCIA){ -+ si->pcmciaidx = i; -+ si->pcmciarev = sb_corerev(sbh); -+ } -+ } ++#define BCM94302MP_BOARD 0x040e + -+ /* -+ * Find the gpio "controlling core" type and index. -+ * Precedence: -+ * - if there's a chip common core - use that -+ * - else if there's a pci core (rev >= 2) - use that -+ * - else there had better be an extif core (4710 only) -+ */ -+ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) { -+ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0); -+ si->gpioid = SB_CC; -+ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) { -+ si->gpioidx = si->pciidx; -+ si->gpioid = SB_PCI; -+ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) { -+ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0); -+ si->gpioid = SB_EXTIF; -+ } ++#define VSIM4310_BOARD 0x040f ++#define BU4711_BOARD 0x0410 ++#define BCM94310U_BOARD 0x0411 ++#define BCM94310AP_BOARD 0x0412 ++#define BCM94310MP_BOARD 0x0414 + -+ /* return to original core index */ -+ sb_setcoreidx(sbh, origidx); -+} ++#define BU4306_BOARD 0x0416 ++#define BCM94306CB_BOARD 0x0417 ++#define BCM94306MP_BOARD 0x0418 + -+/* may be called with core in reset */ -+void -+sb_detach(void *sbh) -+{ -+ sb_info_t *si; -+ uint idx; ++#define BCM94710D_BOARD 0x041a ++#define BCM94710R1_BOARD 0x041b ++#define BCM94710R4_BOARD 0x041c ++#define BCM94710AP_BOARD 0x041d + -+ si = SB_INFO(sbh); + -+ if (si == NULL) -+ return; ++#define BU2050_BOARD 0x041f + -+ if (si->bus == SB_BUS) -+ for (idx = 0; idx < SB_MAXCORES; idx++) -+ if (si->regs[idx]) { -+ REG_UNMAP(si->regs[idx]); -+ si->regs[idx] = NULL; -+ } + -+ MFREE(si, sizeof (sb_info_t)); -+} ++#define BCM94309G_BOARD 0x0421 + -+/* use pci dev id to determine chip id for chips not having a chipcommon core */ -+static uint -+sb_pcidev2chip(uint pcidev) -+{ -+ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) -+ return (BCM4710_DEVICE_ID); -+ if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID)) -+ return (BCM4610_DEVICE_ID); -+ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) -+ return (BCM4402_DEVICE_ID); -+ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) -+ return (BCM4307_DEVICE_ID); -+ if (pcidev == BCM4301_DEVICE_ID) -+ return (BCM4301_DEVICE_ID); ++#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ + -+ return (0); -+} ++#define BU4704_BOARD 0x0423 ++#define BU4702_BOARD 0x0424 + -+/* convert chip number to number of i/o cores */ -+static uint -+sb_chip2numcores(uint chip) -+{ -+ if (chip == 0x4710) -+ return (9); -+ if (chip == 0x4610) -+ return (9); -+ if (chip == 0x4402) -+ return (3); -+ if ((chip == 0x4307) || (chip == 0x4301)) -+ return (5); -+ if (chip == 0x4310) -+ return (8); -+ if (chip == 0x4306) /* < 4306c0 */ -+ return (6); -+ if (chip == 0x4704) -+ return (9); -+ if (chip == 0x5365) -+ return (7); ++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ + -+ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); -+ ASSERT(0); -+ return (1); -+} ++#define BU4317_BOARD 0x0426 + -+/* return index of coreid or BADIDX if not found */ -+static uint -+sb_findcoreidx(void *sbh, uint coreid, uint coreunit) -+{ -+ sb_info_t *si; -+ uint found; -+ uint i; + -+ si = SB_INFO(sbh); -+ found = 0; ++#define BCM94702MN_BOARD 0x0428 + -+ for (i = 0; i < si->numcores; i++) -+ if (si->coreid[i] == coreid) { -+ if (found == coreunit) -+ return (i); -+ found++; -+ } ++/* BCM4702 1U CompactPCI Board */ ++#define BCM94702CPCI_BOARD 0x0429 + -+ return (BADIDX); -+} ++/* BCM4702 with BCM95380 VLAN Router */ ++#define BCM95380RR_BOARD 0x042a + -+/* change logical "focus" to the indiciated core */ -+void* -+sb_setcoreidx(void *sbh, uint coreidx) -+{ -+ sb_info_t *si; -+ uint32 sbaddr; -+ uint8 tmp; ++/* cb4306 with SiGe PA */ ++#define BCM94306CBSG_BOARD 0x042b + -+ si = SB_INFO(sbh); ++/* mp4301 with 2050 radio */ ++#define BCM94301MPL_BOARD 0x042c + -+ if (coreidx >= si->numcores) -+ return (NULL); ++/* cb4306 with SiGe PA */ ++#define PCSG94306_BOARD 0x042d + -+ /* -+ * If the user has provided an interrupt mask enabled function, -+ * then assert interrupts are disabled before switching the core. -+ */ -+ ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg)); ++/* bu4704 with sdram */ ++#define BU4704SD_BOARD 0x042e + -+ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); ++/* Dual 11a/11g Router */ ++#define BCM94704AGR_BOARD 0x042f + -+ switch (si->bus) { -+ case SB_BUS: -+ /* map new one */ -+ if (!si->regs[coreidx]) { -+ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); -+ ASSERT(GOODREGS(si->regs[coreidx])); -+ } -+ si->curmap = si->regs[coreidx]; -+ break; ++/* 11a-only minipci */ ++#define BCM94308MP_BOARD 0x0430 + -+ case PCI_BUS: -+ /* point bar0 window */ -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); -+ break; + -+ case PCMCIA_BUS: -+ tmp = (sbaddr >> 12) & 0x0f; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); -+ tmp = (sbaddr >> 16) & 0xff; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); -+ tmp = (sbaddr >> 24) & 0xff; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); -+ break; -+ } + -+ si->curidx = coreidx; ++/* BCM94317 boards */ ++#define BCM94317CB_BOARD 0x0440 ++#define BCM94317MP_BOARD 0x0441 ++#define BCM94317PCMCIA_BOARD 0x0442 ++#define BCM94317SDIO_BOARD 0x0443 + -+ return (si->curmap); -+} ++#define BU4712_BOARD 0x0444 ++#define BU4712SD_BOARD 0x045d ++#define BU4712L_BOARD 0x045f + -+/* change logical "focus" to the indicated core */ -+void* -+sb_setcore(void *sbh, uint coreid, uint coreunit) -+{ -+ sb_info_t *si; -+ uint idx; ++/* BCM4712 boards */ ++#define BCM94712AP_BOARD 0x0445 ++#define BCM94712P_BOARD 0x0446 + -+ si = SB_INFO(sbh); ++/* BCM4318 boards */ ++#define BU4318_BOARD 0x0447 ++#define CB4318_BOARD 0x0448 ++#define MPG4318_BOARD 0x0449 ++#define MP4318_BOARD 0x044a ++#define SD4318_BOARD 0x044b + -+ idx = sb_findcoreidx(sbh, coreid, coreunit); -+ if (!GOODIDX(idx)) -+ return (NULL); ++/* BCM63XX boards */ ++#define BCM96338_BOARD 0x6338 ++#define BCM96345_BOARD 0x6345 ++#define BCM96348_BOARD 0x6348 + -+ return (sb_setcoreidx(sbh, idx)); -+} ++/* Another mp4306 with SiGe */ ++#define BCM94306P_BOARD 0x044c + -+/* return chip number */ -+uint -+sb_chip(void *sbh) -+{ -+ sb_info_t *si; ++/* CF-like 4317 modules */ ++#define BCM94317CF_BOARD 0x044d + -+ si = SB_INFO(sbh); -+ return (si->chip); -+} ++/* mp4303 */ ++#define BCM94303MP_BOARD 0x044e + -+/* return chip revision number */ -+uint -+sb_chiprev(void *sbh) -+{ -+ sb_info_t *si; ++/* mpsgh4306 */ ++#define BCM94306MPSGH_BOARD 0x044f + -+ si = SB_INFO(sbh); -+ return (si->chiprev); -+} ++/* BRCM 4306 w/ Front End Modules */ ++#define BCM94306MPM 0x0450 ++#define BCM94306MPL 0x0453 + -+/* return chip package option */ -+uint -+sb_chippkg(void *sbh) -+{ -+ sb_info_t *si; ++/* 4712agr */ ++#define BCM94712AGR_BOARD 0x0451 + -+ si = SB_INFO(sbh); -+ return (si->chippkg); -+} ++/* The real CF 4317 board */ ++#define CFI4317_BOARD 0x0452 + -+/* return board vendor id */ -+uint -+sb_boardvendor(void *sbh) -+{ -+ sb_info_t *si; ++/* pcmcia 4303 */ ++#define PC4303_BOARD 0x0454 + -+ si = SB_INFO(sbh); -+ return (si->boardvendor); -+} ++/* 5350K */ ++#define BCM95350K_BOARD 0x0455 + -+/* return boardtype */ -+uint -+sb_boardtype(void *sbh) -+{ -+ sb_info_t *si; -+ char *var; ++/* 5350R */ ++#define BCM95350R_BOARD 0x0456 + -+ si = SB_INFO(sbh); ++/* 4306mplna */ ++#define BCM94306MPLNA_BOARD 0x0457 + -+ if (si->bus == SB_BUS && si->boardtype == 0xffff) { -+ /* boardtype format is a hex string */ -+ si->boardtype = getintvar(NULL, "boardtype"); ++/* 4320 boards */ ++#define BU4320_BOARD 0x0458 ++#define BU4320S_BOARD 0x0459 ++#define BCM94320PH_BOARD 0x045a + -+ /* backward compatibility for older boardtype string format */ -+ if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) { -+ if (!strcmp(var, "bcm94710dev")) -+ si->boardtype = BCM94710D_BOARD; -+ else if (!strcmp(var, "bcm94710ap")) -+ si->boardtype = BCM94710AP_BOARD; -+ else if (!strcmp(var, "bcm94310u")) -+ si->boardtype = BCM94310U_BOARD; -+ else if (!strcmp(var, "bu4711")) -+ si->boardtype = BU4711_BOARD; -+ else if (!strcmp(var, "bu4710")) -+ si->boardtype = BU4710_BOARD; -+ else if (!strcmp(var, "bcm94702mn")) -+ si->boardtype = BCM94702MN_BOARD; -+ else if (!strcmp(var, "bcm94710r1")) -+ si->boardtype = BCM94710R1_BOARD; -+ else if (!strcmp(var, "bcm94710r4")) -+ si->boardtype = BCM94710R4_BOARD; -+ else if (!strcmp(var, "bcm94702cpci")) -+ si->boardtype = BCM94702CPCI_BOARD; -+ else if (!strcmp(var, "bcm95380_rr")) -+ si->boardtype = BCM95380RR_BOARD; -+ } -+ } ++/* 4306mph */ ++#define BCM94306MPH_BOARD 0x045b + -+ return (si->boardtype); -+} ++/* 4306pciv */ ++#define BCM94306PCIV_BOARD 0x045c + -+/* return board bus style */ -+uint -+sb_boardstyle(void *sbh) -+{ -+ sb_info_t *si; -+ uint16 w; ++#define BU4712SD_BOARD 0x045d + -+ si = SB_INFO(sbh); ++#define BCM94320PFLSH_BOARD 0x045e + -+ if (si->bus == PCMCIA_BUS) -+ return (BOARDSTYLE_PCMCIA); ++#define BU4712L_BOARD 0x045f ++#define BCM94712LGR_BOARD 0x0460 ++#define BCM94320R_BOARD 0x0461 + -+ if (si->bus == SB_BUS) -+ return (BOARDSTYLE_SOC); ++#define BU5352_BOARD 0x0462 + -+ /* bus is PCI */ ++#define BCM94318MPGH_BOARD 0x0463 + -+ if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0) -+ return (BOARDSTYLE_CARDBUS); + -+ if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) && -+ (w == 0x0313)) -+ return (BOARDSTYLE_CARDBUS); ++#define BCM95352GR_BOARD 0x0467 + -+ return (BOARDSTYLE_PCI); -+} ++/* bcm95351agr */ ++#define BCM95351AGR_BOARD 0x0470 + -+/* return boolean if sbh device is in pci hostmode or client mode */ -+uint -+sb_bus(void *sbh) -+{ -+ sb_info_t *si; ++/* # of GPIO pins */ ++#define GPIO_NUMPINS 16 + -+ si = SB_INFO(sbh); -+ return (si->bus); -+} ++#endif /* _BCMDEVS_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h +--- linux.old/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h 2005-12-15 15:25:47.146730500 +0100 +@@ -0,0 +1,152 @@ ++/* ++ * local version of endian.h - byte order defines ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++*/ + -+/* return list of found cores */ -+uint -+sb_corelist(void *sbh, uint coreid[]) -+{ -+ sb_info_t *si; ++#ifndef _BCMENDIAN_H_ ++#define _BCMENDIAN_H_ + -+ si = SB_INFO(sbh); ++#include + -+ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); -+ return (si->numcores); -+} ++/* Byte swap a 16 bit value */ ++#define BCMSWAP16(val) \ ++ ((uint16)( \ ++ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ ++ (((uint16)(val) & (uint16)0xff00U) >> 8) )) ++ ++/* Byte swap a 32 bit value */ ++#define BCMSWAP32(val) \ ++ ((uint32)( \ ++ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ ++ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ ++ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ ++ (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) ++ ++/* 2 Byte swap a 32 bit value */ ++#define BCMSWAP32BY16(val) \ ++ ((uint32)( \ ++ (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \ ++ (((uint32)(val) & (uint32)0xffff0000UL) >> 16) )) ++ + -+/* return current register mapping */ -+void * -+sb_coreregs(void *sbh) ++static INLINE uint16 ++bcmswap16(uint16 val) +{ -+ sb_info_t *si; -+ -+ si = SB_INFO(sbh); -+ ASSERT(GOODREGS(si->curmap)); -+ -+ return (si->curmap); ++ return BCMSWAP16(val); +} + -+/* Check if a target abort has happened and clear it */ -+bool -+sb_taclear(void *sbh) ++static INLINE uint32 ++bcmswap32(uint32 val) +{ -+ sb_info_t *si; -+ bool rc = FALSE; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ sb = REGS2SB(si->curmap); -+ -+ if (si->bus == PCI_BUS) { -+ uint32 stcmd; -+ -+ stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd)); -+ rc = (stcmd & 0x08000000) != 0; -+ -+ if (rc) { -+ /* Target abort bit is set, clear it */ -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd); -+ } -+ } else if (si->bus == PCMCIA_BUS) { -+ rc = FALSE; -+ } -+ else if (si->bus == SDIO_BUS) { -+ /* due to 4317 A0 HW bug, sdio core wedged on target abort, -+ just clear SBSErr bit blindly */ -+ if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) { -+ SB_ERROR(("SDIO target abort, clean it")); -+ W_SBREG(sbh, &sb->sbtmstatehigh, 0); -+ } -+ rc = FALSE; -+ } -+ -+ return (rc); ++ return BCMSWAP32(val); +} + -+/* do buffered registers update */ -+void -+sb_commit(void *sbh) ++static INLINE uint32 ++bcmswap32by16(uint32 val) +{ -+ sb_info_t *si; -+ sbpciregs_t *pciregs; -+ uint origidx; -+ uint intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ -+ origidx = si->curidx; -+ ASSERT(GOODIDX(origidx)); -+ -+ INTR_OFF(si, intr_val); -+ /* switch over to pci core */ -+ pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0); -+ -+ /* do the buffer registers update */ -+ W_REG(&pciregs->bcastaddr, SB_COMMIT); -+ W_REG(&pciregs->bcastdata, 0x0); -+ -+ /* restore core index */ -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); ++ return BCMSWAP32BY16(val); +} + -+/* reset and re-enable a core */ -+void -+sb_core_reset(void *sbh, uint32 bits) ++/* buf - start of buffer of shorts to swap */ ++/* len - byte length of buffer */ ++static INLINE void ++bcmswap16_buf(uint16 *buf, uint len) +{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ volatile uint32 dummy; -+ -+ si = SB_INFO(sbh); -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ -+ /* -+ * Must do the disable sequence first to work for arbitrary current core state. -+ */ -+ sb_core_disable(sbh, bits); -+ -+ /* -+ * Now do the initialization sequence. -+ */ -+ -+ /* set reset while enabling the clock and forcing them on throughout the core */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); ++ len = len/2; + -+ if (sb_coreid(sbh) == SB_ILINE100) { -+ bcm_mdelay(50); -+ } else { -+ OSL_DELAY(1); ++ while(len--){ ++ *buf = bcmswap16(*buf); ++ buf++; + } ++} + -+ if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) { -+ W_SBREG(sbh, &sb->sbtmstatehigh, 0); -+ } -+ if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { -+ AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); -+ } ++#ifndef hton16 ++#ifndef IL_BIGENDIAN ++#define HTON16(i) BCMSWAP16(i) ++#define hton16(i) bcmswap16(i) ++#define hton32(i) bcmswap32(i) ++#define ntoh16(i) bcmswap16(i) ++#define ntoh32(i) bcmswap32(i) ++#define ltoh16(i) (i) ++#define ltoh32(i) (i) ++#define htol16(i) (i) ++#define htol32(i) (i) ++#else ++#define HTON16(i) (i) ++#define hton16(i) (i) ++#define hton32(i) (i) ++#define ntoh16(i) (i) ++#define ntoh32(i) (i) ++#define ltoh16(i) bcmswap16(i) ++#define ltoh32(i) bcmswap32(i) ++#define htol16(i) bcmswap16(i) ++#define htol32(i) bcmswap32(i) ++#endif ++#endif + -+ /* clear reset and allow it to propagate throughout the core */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); -+ OSL_DELAY(1); ++#ifndef IL_BIGENDIAN ++#define ltoh16_buf(buf, i) ++#define htol16_buf(buf, i) ++#else ++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#endif + -+ /* leave clock enabled */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); -+ OSL_DELAY(1); ++/* ++* load 16-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint16 ++ltoh16_ua(uint8 *bytes) ++{ ++ return (bytes[1]<<8)+bytes[0]; +} + -+void -+sb_core_tofixup(void *sbh) ++/* ++* load 32-bit value from unaligned little endian byte array. ++*/ ++static INLINE uint32 ++ltoh32_ua(uint8 *bytes) +{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ -+ si = SB_INFO(sbh); -+ -+ if (si->pcirev >= 5) -+ return; -+ -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ -+ if (si->bus == SB_BUS) { -+ SET_SBREG(sbh, &sb->sbimconfiglow, -+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x5 << SBIMCL_RTO_SHIFT) | 0x3); -+ } else { -+ if (sb_coreid(sbh) == SB_PCI) { -+ SET_SBREG(sbh, &sb->sbimconfiglow, -+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); -+ } else { -+ SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); -+ } -+ } -+ -+ sb_commit(sbh); ++ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0]; +} + -+void -+sb_core_disable(void *sbh, uint32 bits) ++/* ++* load 16-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint16 ++ntoh16_ua(uint8 *bytes) +{ -+ sb_info_t *si; -+ volatile uint32 dummy; -+ sbconfig_t *sb; ++ return (bytes[0]<<8)+bytes[1]; ++} + -+ si = SB_INFO(sbh); ++/* ++* load 32-bit value from unaligned big(network) endian byte array. ++*/ ++static INLINE uint32 ++ntoh32_ua(uint8 *bytes) ++{ ++ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; ++} + -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); ++#define ltoh_ua(ptr) ( \ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \ ++ (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \ ++) + -+ /* must return if core is already in reset */ -+ if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET) -+ return; ++#define ntoh_ua(ptr) ( \ ++ sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \ ++ sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \ ++ (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \ ++) + -+ /* put into reset and return if clocks are not enabled */ -+ if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0) -+ goto disable; ++#endif /* _BCMENDIAN_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h +--- linux.old/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h 2005-12-15 16:04:35.850827500 +0100 +@@ -0,0 +1,87 @@ ++/* ++ * NVRAM variable manipulation ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ /* set the reject bit */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ)); ++#ifndef _bcmnvram_h_ ++#define _bcmnvram_h_ + -+ /* spin until reject is set */ -+ while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0) -+ OSL_DELAY(1); ++#ifndef _LANGUAGE_ASSEMBLY + -+ /* spin until sbtmstatehigh.busy is clear */ -+ while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY) -+ OSL_DELAY(1); ++#include + -+ /* set reset and reject while enabling the clocks */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET)); -+ dummy = R_SBREG(sbh, &sb->sbtmstatelow); -+ OSL_DELAY(10); ++struct nvram_header { ++ uint32 magic; ++ uint32 len; ++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ ++ uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ ++ uint32 config_ncdl; /* ncdl values for memc */ ++}; + -+ disable: -+ /* leave reset and reject asserted */ -+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET)); -+ OSL_DELAY(1); -+} ++struct nvram_tuple { ++ char *name; ++ char *value; ++ struct nvram_tuple *next; ++}; + -+void -+sb_watchdog(void *sbh, uint ticks) -+{ -+ sb_info_t *si = SB_INFO(sbh); ++/* ++ * Get the value of an NVRAM variable. The pointer returned may be ++ * invalid after a set. ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++extern char * __init nvram_get(const char *name); + -+ /* instant NMI */ -+ switch (si->gpioid) { -+ case SB_CC: -+ sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); -+ break; -+ case SB_EXTIF: -+ sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); -+ break; -+ } -+} ++/* ++ * Get the value of an NVRAM variable. ++ * @param name name of variable to get ++ * @return value of variable or NUL if undefined ++ */ ++#define nvram_safe_get(name) (BCMINIT(nvram_get)(name) ? : "") + -+/* initialize the pcmcia core */ -+void -+sb_pcmcia_init(void *sbh) -+{ -+ sb_info_t *si; -+ uint8 cor; ++/* ++ * Match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is string equal ++ * to match or FALSE otherwise ++ */ ++static inline int ++nvram_match(char *name, char *match) { ++ const char *value = BCMINIT(nvram_get)(name); ++ return (value && !strcmp(value, match)); ++} + -+ si = SB_INFO(sbh); ++/* ++ * Inversely match an NVRAM variable. ++ * @param name name of variable to match ++ * @param match value to compare against value of variable ++ * @return TRUE if variable is defined and its value is not string ++ * equal to invmatch or FALSE otherwise ++ */ ++static inline int ++nvram_invmatch(char *name, char *invmatch) { ++ const char *value = BCMINIT(nvram_get)(name); ++ return (value && strcmp(value, invmatch)); ++} + -+ /* enable d11 mac interrupts */ -+ if (si->chip == BCM4301_DEVICE_ID) { -+ /* Have to use FCR2 in 4301 */ -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); -+ } else { -+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ cor |= COR_IRQEN | COR_FUNEN; -+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); -+ } ++#endif /* _LANGUAGE_ASSEMBLY */ + -+} ++#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ ++#define NVRAM_VERSION 1 ++#define NVRAM_HEADER_SIZE 20 ++#define NVRAM_SPACE 0x8000 + ++#define NVRAM_MAX_VALUE_LEN 255 ++#define NVRAM_MAX_PARAM_LEN 64 + ++#endif /* _bcmnvram_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h +--- linux.old/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h 2005-12-15 15:34:32.919589250 +0100 +@@ -0,0 +1,23 @@ +/* -+ * Configure the pci core for pci client (NIC) action -+ * and get appropriate dma offset value. -+ * coremask is the bitvec of cores by index to be enabled. ++ * Misc useful routines to access NIC local SROM/OTP . ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ -+void -+sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask) -+{ -+ sb_info_t *si; -+ sbconfig_t *sb; -+ sbpciregs_t *pciregs; -+ uint32 sbflag; -+ uint32 w; -+ uint idx; -+ -+ si = SB_INFO(sbh); + -+ if (dmaoffset) -+ *dmaoffset = 0; ++#ifndef _bcmsrom_h_ ++#define _bcmsrom_h_ + -+ /* if not pci bus, we're done */ -+ if (si->bus != PCI_BUS) -+ return; ++extern int srom_var_init(void *sbh, uint bus, void *curmap, osl_t *osh, char **vars, int *count); + -+ ASSERT(si->pciidx); ++extern int srom_read(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); ++extern int srom_write(uint bus, void *curmap, osl_t *osh, uint byteoff, uint nbytes, uint16 *buf); + -+ /* get current core index */ -+ idx = si->curidx; ++#endif /* _bcmsrom_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h +--- linux.old/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h 2005-12-15 16:44:25.619117750 +0100 +@@ -0,0 +1,308 @@ ++/* ++ * Misc useful os-independent macros and functions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+ /* we interrupt on this backplane flag number */ -+ ASSERT(GOODREGS(si->curmap)); -+ sb = REGS2SB(si->curmap); -+ sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; ++#ifndef _bcmutils_h_ ++#define _bcmutils_h_ + -+ /* switch over to pci core */ -+ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx); -+ sb = REGS2SB(pciregs); ++/*** driver-only section ***/ ++#include + -+ /* -+ * Enable sb->pci interrupts. Assume -+ * PCI rev 2.3 support was added in pci core rev 6 and things changed.. -+ */ -+ if (si->pcirev < 6) { -+ /* set sbintvec bit for our flag number */ -+ OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag)); -+ } else { -+ /* pci config write to set this core bit in PCIIntMask */ -+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); -+ w |= (coremask << PCI_SBIM_SHIFT); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); -+ } ++#define _BCM_U 0x01 /* upper */ ++#define _BCM_L 0x02 /* lower */ ++#define _BCM_D 0x04 /* digit */ ++#define _BCM_C 0x08 /* cntrl */ ++#define _BCM_P 0x10 /* punct */ ++#define _BCM_S 0x20 /* white space (space/lf/tab) */ ++#define _BCM_X 0x40 /* hex digit */ ++#define _BCM_SP 0x80 /* hard space (0x20) */ + -+ /* enable prefetch and bursts for sonics-to-pci translation 2 */ -+ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); ++#define GPIO_PIN_NOTDEFINED 0x20 + -+ if (si->pcirev < 5) { -+ SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, -+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2); -+ sb_commit(sbh); -+ } ++extern unsigned char bcm_ctype[]; ++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) + -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); ++#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) ++#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) ++#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) ++#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) ++#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) ++#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) ++#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) ++#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) ++#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) ++#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) + -+ /* use large sb pci dma window */ -+ if (dmaoffset) -+ *dmaoffset = SB_PCI_DMA; ++/* ++ * Spin at most 'us' microseconds while 'exp' is true. ++ * Caller should explicitly test 'exp' when this completes ++ * and take appropriate error action if 'exp' is still true. ++ */ ++#define SPINWAIT(exp, us) { \ ++ uint countdown = (us) + 9; \ ++ while ((exp) && (countdown >= 10)) {\ ++ OSL_DELAY(10); \ ++ countdown -= 10; \ ++ } \ +} + -+uint32 -+sb_base(uint32 admatch) -+{ -+ uint32 base; -+ uint type; ++/* generic osl packet queue */ ++struct pktq { ++ void *head; /* first packet to dequeue */ ++ void *tail; /* last packet to dequeue */ ++ uint len; /* number of queued packets */ ++ uint maxlen; /* maximum number of queued packets */ ++ bool priority; /* enqueue by packet priority */ ++ uint8 prio_map[MAXPRIO+1]; /* user priority to packet enqueue policy map */ ++}; ++#define DEFAULT_QLEN 128 + -+ type = admatch & SBAM_TYPE_MASK; -+ ASSERT(type < 3); ++#define pktq_len(q) ((q)->len) ++#define pktq_avail(q) ((q)->maxlen - (q)->len) ++#define pktq_head(q) ((q)->head) ++#define pktq_full(q) ((q)->len >= (q)->maxlen) ++#define _pktq_pri(q, pri) ((q)->prio_map[pri]) ++#define pktq_tailpri(q) ((q)->tail ? _pktq_pri(q, PKTPRIO((q)->tail)) : _pktq_pri(q, 0)) + -+ base = 0; ++/* externs */ ++/* packet */ ++extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf); ++extern uint pkttotlen(osl_t *osh, void *); ++extern void pktq_init(struct pktq *q, uint maxlen, const uint8 prio_map[]); ++extern void pktenq(struct pktq *q, void *p, bool lifo); ++extern void *pktdeq(struct pktq *q); ++extern void *pktdeqtail(struct pktq *q); ++/* string */ ++extern uint bcm_atoi(char *s); ++extern uchar bcm_toupper(uchar c); ++extern ulong bcm_strtoul(char *cp, char **endp, uint base); ++extern char *bcmstrstr(char *haystack, char *needle); ++extern char *bcmstrcat(char *dest, const char *src); ++extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen); ++/* ethernet address */ ++extern char *bcm_ether_ntoa(char *ea, char *buf); ++extern int bcm_ether_atoe(char *p, char *ea); ++/* delay */ ++extern void bcm_mdelay(uint ms); ++/* variable access */ ++extern char *getvar(char *vars, char *name); ++extern int getintvar(char *vars, char *name); ++extern uint getgpiopin(char *vars, char *pin_name, uint def_pin); ++#define bcmlog(fmt, a1, a2) ++#define bcmdumplog(buf, size) *buf = '\0' ++#define bcmdumplogent(buf, idx) -1 + -+ if (type == 0) { -+ base = admatch & SBAM_BASE0_MASK; -+ } else if (type == 1) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ base = admatch & SBAM_BASE1_MASK; -+ } else if (type == 2) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ base = admatch & SBAM_BASE2_MASK; -+ } ++/*** driver/apps-shared section ***/ + -+ return (base); -+} ++#define BCME_STRLEN 64 ++#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) + -+uint32 -+sb_size(uint32 admatch) -+{ -+ uint32 size; -+ uint type; + -+ type = admatch & SBAM_TYPE_MASK; -+ ASSERT(type < 3); ++/* ++ * error codes could be added but the defined ones shouldn't be changed/deleted ++ * these error codes are exposed to the user code ++ * when ever a new error code is added to this list ++ * please update errorstring table with the related error string and ++ * update osl files with os specific errorcode map ++*/ + -+ size = 0; ++#define BCME_ERROR -1 /* Error generic */ ++#define BCME_BADARG -2 /* Bad Argument */ ++#define BCME_BADOPTION -3 /* Bad option */ ++#define BCME_NOTUP -4 /* Not up */ ++#define BCME_NOTDOWN -5 /* Not down */ ++#define BCME_NOTAP -6 /* Not AP */ ++#define BCME_NOTSTA -7 /* Not STA */ ++#define BCME_BADKEYIDX -8 /* BAD Key Index */ ++#define BCME_RADIOOFF -9 /* Radio Off */ ++#define BCME_NOTBANDLOCKED -10 /* Not bandlocked */ ++#define BCME_NOCLK -11 /* No Clock*/ ++#define BCME_BADRATESET -12 /* BAD RateSet*/ ++#define BCME_BADBAND -13 /* BAD Band */ ++#define BCME_BUFTOOSHORT -14 /* Buffer too short */ ++#define BCME_BUFTOOLONG -15 /* Buffer too Long */ ++#define BCME_BUSY -16 /* Busy*/ ++#define BCME_NOTASSOCIATED -17 /* Not associated*/ ++#define BCME_BADSSIDLEN -18 /* BAD SSID Len */ ++#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel*/ ++#define BCME_BADCHAN -20 /* BAD Channel */ ++#define BCME_BADADDR -21 /* BAD Address*/ ++#define BCME_NORESOURCE -22 /* No resources*/ ++#define BCME_UNSUPPORTED -23 /* Unsupported*/ ++#define BCME_BADLEN -24 /* Bad Length*/ ++#define BCME_NOTREADY -25 /* Not ready Yet*/ ++#define BCME_EPERM -26 /* Not Permitted */ ++#define BCME_NOMEM -27 /* No Memory */ ++#define BCME_ASSOCIATED -28 /* Associated */ ++#define BCME_RANGE -29 /* Range Error*/ ++#define BCME_NOTFOUND -30 /* Not found */ ++#define BCME_LAST BCME_NOTFOUND ++ ++#ifndef ABS ++#define ABS(a) (((a)<0)?-(a):(a)) ++#endif + -+ if (type == 0) { -+ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); -+ } else if (type == 1) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); -+ } else if (type == 2) { -+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ -+ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); -+ } ++#ifndef MIN ++#define MIN(a, b) (((a)<(b))?(a):(b)) ++#endif + -+ return (size); -+} ++#ifndef MAX ++#define MAX(a, b) (((a)>(b))?(a):(b)) ++#endif + -+/* return the core-type instantiation # of the current core */ -+uint -+sb_coreunit(void *sbh) -+{ -+ sb_info_t *si; -+ uint idx; -+ uint coreid; -+ uint coreunit; -+ uint i; ++#define CEIL(x, y) (((x) + ((y)-1)) / (y)) ++#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) ++#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) ++#define ISPOWEROF2(x) ((((x)-1)&(x))==0) ++#define VALID_MASK(mask) !((mask) & ((mask) + 1)) ++#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) ++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) + -+ si = SB_INFO(sbh); -+ coreunit = 0; ++/* bit map related macros */ ++#ifndef setbit ++#define NBBY 8 /* 8 bits per byte */ ++#define setbit(a,i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) ++#define clrbit(a,i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) ++#define isset(a,i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) ++#define isclr(a,i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) ++#endif + -+ idx = si->curidx; ++#define NBITS(type) (sizeof(type) * 8) ++#define NBITVAL(bits) (1 << (bits)) ++#define MAXBITVAL(bits) ((1 << (bits)) - 1) + -+ ASSERT(GOODREGS(si->curmap)); -+ coreid = sb_coreid(sbh); ++/* crc defines */ ++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ ++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ ++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ ++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ + -+ /* count the cores of our type */ -+ for (i = 0; i < idx; i++) -+ if (si->coreid[i] == coreid) -+ coreunit++; ++/* bcm_format_flags() bit description structure */ ++typedef struct bcm_bit_desc { ++ uint32 bit; ++ char* name; ++} bcm_bit_desc_t; + -+ return (coreunit); -+} ++/* tag_ID/length/value_buffer tuple */ ++typedef struct bcm_tlv { ++ uint8 id; ++ uint8 len; ++ uint8 data[1]; ++} bcm_tlv_t; + ++/* Check that bcm_tlv_t fits into the given buflen */ ++#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) ++ ++/* buffer length for ethernet address from bcm_ether_ntoa() */ ++#define ETHER_ADDR_STR_LEN 18 ++ ++/* unaligned load and store macros */ ++#ifdef IL_BIGENDIAN +static INLINE uint32 -+factor6(uint32 x) ++load32_ua(uint8 *a) +{ -+ switch (x) { -+ case CC_F6_2: return 2; -+ case CC_F6_3: return 3; -+ case CC_F6_4: return 4; -+ case CC_F6_5: return 5; -+ case CC_F6_6: return 6; -+ case CC_F6_7: return 7; -+ default: return 0; -+ } ++ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); +} + -+/* calculate the speed the SB would run at given a set of clockcontrol values */ -+uint32 -+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) ++static INLINE void ++store32_ua(uint8 *a, uint32 v) +{ -+ uint32 n1, n2, clock, m1, m2, m3, mc; -+ -+ n1 = n & CN_N1_MASK; -+ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; -+ -+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { -+ n1 = factor6(n1); -+ n2 += CC_F5_BIAS; -+ } else if (pll_type == PLL_TYPE2) { -+ n1 += CC_T2_BIAS; -+ n2 += CC_T2_BIAS; -+ ASSERT((n1 >= 2) && (n1 <= 7)); -+ ASSERT((n2 >= 5) && (n2 <= 23)); -+ } else if (pll_type == PLL_TYPE3) { -+ return (100000000); -+ } else -+ ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4)); -+ -+ clock = CC_CLOCK_BASE * n1 * n2; -+ -+ if (clock == 0) -+ return 0; -+ -+ m1 = m & CC_M1_MASK; -+ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; -+ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; -+ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; -+ -+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { -+ m1 = factor6(m1); -+ if (pll_type == PLL_TYPE1) -+ m2 += CC_F5_BIAS; -+ else -+ m2 = factor6(m2); -+ m3 = factor6(m3); -+ -+ switch (mc) { -+ case CC_MC_BYPASS: return (clock); -+ case CC_MC_M1: return (clock / m1); -+ case CC_MC_M1M2: return (clock / (m1 * m2)); -+ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); -+ case CC_MC_M1M3: return (clock / (m1 * m3)); -+ default: return (0); -+ } -+ } else { -+ ASSERT(pll_type == PLL_TYPE2); -+ -+ m1 += CC_T2_BIAS; -+ m2 += CC_T2M2_BIAS; -+ m3 += CC_T2_BIAS; -+ ASSERT((m1 >= 2) && (m1 <= 7)); -+ ASSERT((m2 >= 3) && (m2 <= 10)); -+ ASSERT((m3 >= 2) && (m3 <= 7)); -+ -+ if ((mc & CC_T2MC_M1BYP) == 0) -+ clock /= m1; -+ if ((mc & CC_T2MC_M2BYP) == 0) -+ clock /= m2; -+ if ((mc & CC_T2MC_M3BYP) == 0) -+ clock /= m3; -+ -+ return(clock); -+ } ++ a[0] = (v >> 24) & 0xff; ++ a[1] = (v >> 16) & 0xff; ++ a[2] = (v >> 8) & 0xff; ++ a[3] = v & 0xff; +} + -+/* returns the current speed the SB is running at */ -+uint32 -+sb_clock(void *sbh) ++static INLINE uint16 ++load16_ua(uint8 *a) +{ -+ sb_info_t *si; -+ extifregs_t *eir; -+ chipcregs_t *cc; -+ uint32 n, m; -+ uint idx; -+ uint32 pll_type, rate; -+ uint intr_val = 0; -+ -+ si = SB_INFO(sbh); -+ idx = si->curidx; -+ pll_type = PLL_TYPE1; -+ -+ INTR_OFF(si, intr_val); -+ -+ /* switch to extif or chipc core */ -+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { -+ n = R_REG(&eir->clockcontrol_n); -+ m = R_REG(&eir->clockcontrol_sb); -+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { -+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; -+ n = R_REG(&cc->clockcontrol_n); -+ m = R_REG(&cc->clockcontrol_sb); -+ } else { -+ INTR_RESTORE(si, intr_val); -+ return 0; -+ } -+ -+ /* calculate rate */ -+ rate = sb_clock_rate(pll_type, n, m); -+ -+ /* switch back to previous core */ -+ sb_setcoreidx(sbh, idx); -+ -+ INTR_RESTORE(si, intr_val); -+ -+ return rate; ++ return ((a[0] << 8) | a[1]); +} + -+/* change logical "focus" to the gpio core for optimized access */ -+void* -+sb_gpiosetcore(void *sbh) ++static INLINE void ++store16_ua(uint8 *a, uint16 v) +{ -+ sb_info_t *si; ++ a[0] = (v >> 8) & 0xff; ++ a[1] = v & 0xff; ++} + -+ si = SB_INFO(sbh); ++#else + -+ return (sb_setcoreidx(sbh, si->gpioidx)); ++static INLINE uint32 ++load32_ua(uint8 *a) ++{ ++ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); +} + -+/* mask&set gpiocontrol bits */ -+uint32 -+sb_gpiocontrol(void *sbh, uint32 mask, uint32 val) ++static INLINE void ++store32_ua(uint8 *a, uint32 v) +{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpiocontrol); -+ break; -+ -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpiocontrol); -+ break; -+ -+ case SB_EXTIF: -+ return (0); -+ } ++ a[3] = (v >> 24) & 0xff; ++ a[2] = (v >> 16) & 0xff; ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++static INLINE uint16 ++load16_ua(uint8 *a) ++{ ++ return ((a[1] << 8) | a[0]); +} + -+/* mask&set gpio output enable bits */ -+uint32 -+sb_gpioouten(void *sbh, uint32 mask, uint32 val) ++static INLINE void ++store16_ua(uint8 *a, uint16 v) +{ -+ sb_info_t *si; -+ uint regoff; ++ a[1] = (v >> 8) & 0xff; ++ a[0] = v & 0xff; ++} + -+ si = SB_INFO(sbh); -+ regoff = 0; ++#endif + -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpioouten); -+ break; ++/* externs */ ++/* crc */ ++extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc); ++/* format/print */ ++/* IE parsing */ ++extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen); ++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); ++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); + -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpioouten); -+ break; ++/* bcmerror*/ ++extern const char *bcmerrorstr(int bcmerror); ++ ++/* multi-bool data type: set of bools, mbool is true if any is set */ ++typedef uint32 mbool; ++#define mboolset(mb, bit) (mb |= bit) /* set one bool */ ++#define mboolclr(mb, bit) (mb &= ~bit) /* clear one bool */ ++#define mboolisset(mb, bit) ((mb & bit) != 0) /* TRUE if one bool is set */ ++#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) ++ ++/* power conversion */ ++extern uint16 bcm_qdbm_to_mw(uint8 qdbm); ++extern uint8 bcm_mw_to_qdbm(uint16 mw); ++ ++/* generic datastruct to help dump routines */ ++struct fielddesc { ++ char *nameandfmt; ++ uint32 offset; ++ uint32 len; ++}; + -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpio[0].outen); -+ break; -+ } ++typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset); ++extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str, char *buf, uint32 bufsize); + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); -+} ++extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); + -+/* mask&set gpio output bits */ -+uint32 -+sb_gpioout(void *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ uint regoff; ++#endif /* _bcmutils_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bcm947xx/include/bitfuncs.h +--- linux.old/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h 2005-12-15 15:34:40.268048500 +0100 +@@ -0,0 +1,85 @@ ++/* ++ * bit manipulation utility functions ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+ si = SB_INFO(sbh); -+ regoff = 0; ++#ifndef _BITFUNCS_H ++#define _BITFUNCS_H + -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpioout); -+ break; ++#include + -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpioout); -+ break; ++/* local prototypes */ ++static INLINE uint32 find_msbit(uint32 x); + -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpio[0].out); -+ break; -+ } + -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); -+} ++/* ++ * find_msbit: returns index of most significant set bit in x, with index ++ * range defined as 0-31. NOTE: returns zero if input is zero. ++ */ + -+/* return the current gpioin register value */ -+uint32 -+sb_gpioin(void *sbh) -+{ -+ sb_info_t *si; -+ uint regoff; ++#if defined(USE_PENTIUM_BSR) && defined(__GNUC__) + -+ si = SB_INFO(sbh); -+ regoff = 0; ++/* ++ * Implementation for Pentium processors and gcc. Note that this ++ * instruction is actually very slow on some processors (e.g., family 5, ++ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic ++ * implementation instead. ++ */ ++static INLINE uint32 find_msbit(uint32 x) ++{ ++ uint msbit; ++ __asm__("bsrl %1,%0" ++ :"=r" (msbit) ++ :"r" (x)); ++ return msbit; ++} + -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpioin); -+ break; ++#else + -+ case SB_PCI: -+ regoff = OFFSETOF(sbpciregs_t, gpioin); -+ break; ++/* ++ * Generic Implementation ++ */ + -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpioin); -+ break; -+ } -+ -+ return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0)); -+} ++#define DB_POW_MASK16 0xffff0000 ++#define DB_POW_MASK8 0x0000ff00 ++#define DB_POW_MASK4 0x000000f0 ++#define DB_POW_MASK2 0x0000000c ++#define DB_POW_MASK1 0x00000002 + -+/* mask&set gpio interrupt polarity bits */ -+uint32 -+sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val) ++static INLINE uint32 find_msbit(uint32 x) +{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpiointpolarity); -+ break; -+ -+ case SB_PCI: -+ /* pci gpio implementation does not support interrupt polarity */ -+ ASSERT(0); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpiointpolarity); -+ break; ++ uint32 temp_x = x; ++ uint msbit = 0; ++ if (temp_x & DB_POW_MASK16) { ++ temp_x >>= 16; ++ msbit = 16; + } -+ -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); -+} -+ -+/* mask&set gpio interrupt mask bits */ -+uint32 -+sb_gpiointmask(void *sbh, uint32 mask, uint32 val) -+{ -+ sb_info_t *si; -+ uint regoff; -+ -+ si = SB_INFO(sbh); -+ regoff = 0; -+ -+ switch (si->gpioid) { -+ case SB_CC: -+ regoff = OFFSETOF(chipcregs_t, gpiointmask); -+ break; -+ -+ case SB_PCI: -+ /* pci gpio implementation does not support interrupt mask */ -+ ASSERT(0); -+ break; -+ -+ case SB_EXTIF: -+ regoff = OFFSETOF(extifregs_t, gpiointmask); -+ break; ++ if (temp_x & DB_POW_MASK8) { ++ temp_x >>= 8; ++ msbit += 8; + } -+ -+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); ++ if (temp_x & DB_POW_MASK4) { ++ temp_x >>= 4; ++ msbit += 4; ++ } ++ if (temp_x & DB_POW_MASK2) { ++ temp_x >>= 2; ++ msbit += 2; ++ } ++ if (temp_x & DB_POW_MASK1) { ++ msbit += 1; ++ } ++ return(msbit); +} + ++#endif + ++#endif /* _BITFUNCS_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm947xx/include/flash.h +--- linux.old/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/flash.h 2005-12-15 15:34:44.280299250 +0100 +@@ -0,0 +1,188 @@ +/* -+ * Return the slowclock min or max frequency. -+ * Three sources of SLOW CLOCK: -+ * 1. On Chip LPO - 32khz or 160khz -+ * 2. On Chip Xtal OSC - 20mhz/4*(divider+1) -+ * 3. External PCI clock - 66mhz/4*(divider+1) ++ * flash.h: Common definitions for flash access. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ -+static uint -+slowfreq(void *sbh, bool max) -+{ -+ sb_info_t *si; -+ chipcregs_t *cc; -+ uint32 v; -+ uint div; -+ -+ si = SB_INFO(sbh); -+ -+ ASSERT(sb_coreid(sbh) == SB_CC); -+ -+ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); -+ -+ /* shouldn't be here unless we've established the chip has dynamic power control */ -+ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); -+ -+ if (si->ccrev < 6) { -+ v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); -+ -+ if (v & PCI_CFG_GPIO_SCS) -+ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); -+ else -+ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); -+ } else { -+ v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK; -+ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); -+ if (v == SCC_SS_LPO) -+ return (max? LPOMAXFREQ : LPOMINFREQ); -+ else if (v == SCC_SS_XTAL) -+ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); -+ else if (v == SCC_SS_PCI) -+ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); -+ else -+ ASSERT(0); -+ } -+ return (0); -+} + -+/* initialize power control delay registers */ -+void -+sb_pwrctl_init(void *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ uint slowmaxfreq; -+ uint pll_on_delay, fref_sel_delay; ++/* Types of flashes we know about */ ++typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t; + -+ si = SB_INFO(sbh); ++/* Commands to write/erase the flases */ ++typedef struct _flash_cmds{ ++ flash_type_t type; ++ bool need_unlock; ++ uint16 pre_erase; ++ uint16 erase_block; ++ uint16 erase_chip; ++ uint16 write_word; ++ uint16 write_buf; ++ uint16 clear_csr; ++ uint16 read_csr; ++ uint16 read_id; ++ uint16 confirm; ++ uint16 read_array; ++} flash_cmds_t; + -+ if (si->bus == SB_BUS) -+ return; ++#define UNLOCK_CMD_WORDS 2 + -+ origidx = si->curidx; ++typedef struct _unlock_cmd { ++ uint addr[UNLOCK_CMD_WORDS]; ++ uint16 cmd[UNLOCK_CMD_WORDS]; ++} unlock_cmd_t; + -+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) -+ return; ++/* Flash descriptors */ ++typedef struct _flash_desc { ++ uint16 mfgid; /* Manufacturer Id */ ++ uint16 devid; /* Device Id */ ++ uint size; /* Total size in bytes */ ++ uint width; /* Device width in bytes */ ++ flash_type_t type; /* Device type old, S, J */ ++ uint bsize; /* Block size */ ++ uint nb; /* Number of blocks */ ++ uint ff; /* First full block */ ++ uint lf; /* Last full block */ ++ uint nsub; /* Number of subblocks */ ++ uint *subblocks; /* Offsets for subblocks */ ++ char *desc; /* Description */ ++} flash_desc_t; + -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) -+ goto done; + -+ slowmaxfreq = slowfreq(sbh, TRUE); -+ pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000; -+ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; ++#ifdef DECLARE_FLASHES ++flash_cmds_t sflash_cmd_t = ++ { SFLASH, 0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + -+ W_REG(&cc->pll_on_delay, pll_on_delay); -+ W_REG(&cc->fref_sel_delay, fref_sel_delay); ++flash_cmds_t flash_cmds[] = { ++/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ ++ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, ++ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, ++ { 0 } ++}; + -+ /* 4317pc does not work with SlowClock less than 5Mhz */ -+ if (si->bus == PCMCIA_BUS) -+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF)); ++unlock_cmd_t unlock_cmd_amd = { ++#ifdef MIPSEB ++/* addr: */ { 0x0aa8, 0x0556}, ++#else ++/* addr: */ { 0x0aaa, 0x0554}, ++#endif ++/* data: */ { 0xaa, 0x55} ++}; + -+done: -+ sb_setcoreidx(sbh, origidx); -+} ++unlock_cmd_t unlock_cmd_sst = { ++#ifdef MIPSEB ++/* addr: */ { 0xaaa8, 0x5556}, ++#else ++/* addr: */ { 0xaaaa, 0x5554}, ++#endif ++/* data: */ { 0xaa, 0x55} ++}; + -+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ -+uint16 -+sb_pwrctl_fast_pwrup_delay(void *sbh) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ uint slowminfreq; -+ uint16 fpdelay; -+ uint intr_val = 0; ++#define AMD_CMD 0xaaa ++#define SST_CMD 0xaaaa + -+ si = SB_INFO(sbh); -+ fpdelay = 0; -+ origidx = si->curidx; ++/* intel unlock block cmds */ ++#define INTEL_UNLOCK1 0x60 ++#define INTEL_UNLOCK2 0xD0 + -+ if (si->bus == SB_BUS) -+ goto done; ++/* Just eight blocks of 8KB byte each */ + -+ INTR_OFF(si, intr_val); ++uint blk8x8k[] = { 0x00000000, ++ 0x00002000, ++ 0x00004000, ++ 0x00006000, ++ 0x00008000, ++ 0x0000a000, ++ 0x0000c000, ++ 0x0000e000, ++ 0x00010000 ++}; + -+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) -+ goto done; ++/* Funky AMD arrangement for 29xx800's */ ++uint amd800[] = { 0x00000000, /* 16KB */ ++ 0x00004000, /* 32KB */ ++ 0x0000c000, /* 8KB */ ++ 0x0000e000, /* 8KB */ ++ 0x00010000, /* 8KB */ ++ 0x00012000, /* 8KB */ ++ 0x00014000, /* 32KB */ ++ 0x0001c000, /* 16KB */ ++ 0x00020000 ++}; + -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) -+ goto done; ++/* AMD arrangement for 29xx160's */ ++uint amd4112[] = { 0x00000000, /* 32KB */ ++ 0x00008000, /* 8KB */ ++ 0x0000a000, /* 8KB */ ++ 0x0000c000, /* 16KB */ ++ 0x00010000 ++}; ++uint amd2114[] = { 0x00000000, /* 16KB */ ++ 0x00004000, /* 8KB */ ++ 0x00006000, /* 8KB */ ++ 0x00008000, /* 32KB */ ++ 0x00010000 ++}; + -+ slowminfreq = slowfreq(sbh, FALSE); -+ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; + -+done: -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+ return (fpdelay); -+} -+ -+/* turn primary xtal and/or pll off/on */ -+int -+sb_pwrctl_xtal(void *sbh, uint what, bool on) -+{ -+ sb_info_t *si; -+ uint32 in, out, outen; -+ -+ si = SB_INFO(sbh); ++flash_desc_t sflash_desc = ++ { 0, 0, 0, 0, SFLASH, 0, 0, 0, 0, 0, NULL, "SFLASH" }; + ++flash_desc_t flashes[] = { ++ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" }, ++ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" }, ++ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" }, ++ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" }, ++ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" }, ++ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" }, ++ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" }, ++ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" }, ++ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" }, ++ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" }, ++ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" }, ++ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" }, ++ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" }, ++ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" }, ++ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" }, ++ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" }, ++ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" }, ++ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" }, ++ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" }, ++ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" }, ++ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" }, ++ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" }, ++ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" }, ++ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" }, ++ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" }, ++ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" }, ++ { 0x0001, 0x227e, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, ++ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" }, ++ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" }, ++ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" }, ++ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, ++ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, ++ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" }, ++ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" }, ++ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" }, ++ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" }, ++ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, ++ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, ++ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" }, ++ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL }, ++}; + -+ if (si->bus == PCMCIA_BUS) { -+ return (0); -+ } ++#else + -+ if (si->bus != PCI_BUS) -+ return (-1); ++extern flash_cmds_t flash_cmds[]; ++extern unlock_cmd_t unlock_cmd; ++extern flash_desc_t flashes[]; + -+ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); -+ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); -+ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); ++#endif +diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bcm947xx/include/flashutl.h +--- linux.old/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/flashutl.h 2005-12-15 15:34:48.160541750 +0100 +@@ -0,0 +1,27 @@ ++/* ++ * BCM47XX FLASH driver interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+ /* -+ * We can't actually read the state of the PLLPD so we infer it -+ * by the value of XTAL_PU which *is* readable via gpioin. -+ */ -+ if (on && (in & PCI_CFG_GPIO_XTAL)) -+ return (0); ++#ifndef _flashutl_h_ ++#define _flashutl_h_ + -+ if (what & XTAL) -+ outen |= PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ outen |= PCI_CFG_GPIO_PLL; + -+ if (on) { -+ /* turn primary xtal on */ -+ if (what & XTAL) { -+ out |= PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); -+ OSL_DELAY(200); -+ } ++#ifndef _LANGUAGE_ASSEMBLY + -+ /* turn pll on */ -+ if (what & PLL) { -+ out &= ~PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_DELAY(2000); -+ } -+ } else { -+ if (what & XTAL) -+ out &= ~PCI_CFG_GPIO_XTAL; -+ if (what & PLL) -+ out |= PCI_CFG_GPIO_PLL; -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); -+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); -+ } ++int sysFlashInit(char *flash_str); ++int sysFlashRead(uint off, uchar *dst, uint bytes); ++int sysFlashWrite(uint off, uchar *src, uint bytes); ++void nvWrite(unsigned short *data, unsigned int len); + -+ return (0); -+} ++#endif /* _LANGUAGE_ASSEMBLY */ + -+/* set dynamic power control mode (forceslow, forcefast, dynamic) */ -+/* returns true if ignore pll off is set and false if it is not */ -+bool -+sb_pwrctl_clk(void *sbh, uint mode) -+{ -+ sb_info_t *si; -+ uint origidx; -+ chipcregs_t *cc; -+ uint32 scc; -+ bool forcefastclk=FALSE; -+ uint intr_val = 0; ++#endif /* _flashutl_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h +--- linux.old/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h 2005-12-15 15:34:53.396869000 +0100 +@@ -0,0 +1,16 @@ ++/* ++ * Alternate include file for HND sbmips.h since CFE also ships with ++ * a sbmips.h. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ si = SB_INFO(sbh); ++#include "sbmips.h" +diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/bcm947xx/include/linux_osl.h +--- linux.old/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h 2005-12-15 17:23:39.225126750 +0100 +@@ -0,0 +1,331 @@ ++/* ++ * Linux OS Independent Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ /* chipcommon cores prior to rev6 don't support slowclkcontrol */ -+ if (si->ccrev < 6) -+ return (FALSE); ++#ifndef _linux_osl_h_ ++#define _linux_osl_h_ + -+ INTR_OFF(si, intr_val); ++#include + -+ origidx = si->curidx; ++/* use current 2.4.x calling conventions */ ++#include + -+ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); -+ ASSERT(cc != NULL); ++/* assert and panic */ ++#ifdef __GNUC__ ++#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) ++#if GCC_VERSION > 30100 ++#define ASSERT(exp) do {} while (0) ++#else ++/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/ ++#define ASSERT(exp) ++#endif ++#endif + -+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) -+ goto done; ++/* microsecond delay */ ++#define OSL_DELAY(usec) osl_delay(usec) ++extern void osl_delay(uint usec); + -+ switch (mode) { -+ case CLK_FAST: /* force fast (pll) clock */ -+ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ -+ sb_pwrctl_xtal(sbh, XTAL, ON); ++/* PCI configuration space access macros */ ++#define OSL_PCI_READ_CONFIG(osh, offset, size) \ ++ osl_pci_read_config((osh), (offset), (size)) ++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ ++ osl_pci_write_config((osh), (offset), (size), (val)) ++extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset); ++extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val); ++ ++/* PCI device bus # and slot # */ ++#define OSL_PCI_BUS(osh) osl_pci_bus(osh) ++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) ++extern uint osl_pci_bus(osl_t *osh); ++extern uint osl_pci_slot(osl_t *osh); + -+ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); -+ break; ++/* OSL initialization */ ++extern osl_t *osl_attach(void *pdev); ++extern void osl_detach(osl_t *osh); + -+ case CLK_SLOW: /* force slow clock */ -+ if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS)) -+ return (-1); ++/* host/bus architecture-specific byte swap */ ++#define BUS_SWAP32(v) (v) + -+ if (si->ccrev >= 6) -+ OR_REG(&cc->slow_clk_ctl, SCC_FS); -+ break; ++/* general purpose memory allocation */ + -+ case CLK_DYNAMIC: /* enable dynamic power control */ -+ scc = R_REG(&cc->slow_clk_ctl); -+ scc &= ~(SCC_FS | SCC_IP | SCC_XC); -+ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) -+ scc |= SCC_XC; -+ W_REG(&cc->slow_clk_ctl, scc); ++#define MALLOC(osh, size) kmalloc(size, GFP_ATOMIC) ++#define MFREE(osh, addr, size) kfree(addr); + -+ /* for dynamic control, we have to release our xtal_pu "force on" */ -+ if (scc & SCC_XC) -+ sb_pwrctl_xtal(sbh, XTAL, OFF); -+ break; -+ } -+ -+ /* Is the h/w forcing the use of the fast clk */ -+ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); ++#define MALLOC_FAILED(osh) osl_malloc_failed((osh)) + -+done: -+ sb_setcoreidx(sbh, origidx); -+ INTR_RESTORE(si, intr_val); -+ return (forcefastclk); -+} ++extern void *osl_malloc(osl_t *osh, uint size); ++extern void osl_mfree(osl_t *osh, void *addr, uint size); ++extern uint osl_malloced(osl_t *osh); ++extern uint osl_malloc_failed(osl_t *osh); + -+/* register driver interrupt disabling and restoring callback functions */ -+void -+sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg) -+{ -+ sb_info_t *si; ++/* allocate/free shared (dma-able) consistent memory */ ++#define DMA_CONSISTENT_ALIGN PAGE_SIZE ++#define DMA_ALLOC_CONSISTENT(osh, size, pap) \ ++ osl_dma_alloc_consistent((osh), (size), (pap)) ++#define DMA_FREE_CONSISTENT(osh, va, size, pa) \ ++ osl_dma_free_consistent((osh), (void*)(va), (size), (pa)) ++extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap); ++extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa); + -+ si = SB_INFO(sbh); -+ si->intr_arg = intr_arg; -+ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; -+ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; -+ /* save current core id. when this function called, the current core -+ * must be the core which provides driver functions(il, et, wl, etc.) -+ */ -+ si->dev_coreid = si->coreid[si->curidx]; -+} ++/* map/unmap direction */ ++#define DMA_TX 1 ++#define DMA_RX 2 + ++/* register access macros */ ++#if defined(BCMJTAG) ++#include ++#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r))) ++#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r))) ++#endif + -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h 2005-08-28 11:12:20.430859152 +0200 -@@ -0,0 +1,90 @@ +/* -+ * BCM4710 address space map and definitions -+ * Think twice before adding to this file, this is not the kitchen sink -+ * These definitions are not guaranteed for all 47xx chips, only the 4710 -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++ * Macros expand to calls to functions defined in linux_osl.c . + */ ++#ifndef BINOSL + -+#ifndef _bcm4710_h_ -+#define _bcm4710_h_ ++/* string library, kernel mode */ ++#define printf(fmt, args...) printk(fmt, ## args) ++#include ++#include + -+/* Address map */ -+#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */ -+#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ -+#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */ ++/* register access macros */ ++#if !defined(BCMJTAG) ++#ifndef IL_BIGENDIAN ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ ++ readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#else /* IL_BIGENDIAN */ ++#define R_REG(r) ({ \ ++ __typeof(*(r)) __osl_v; \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ ++ } \ ++ __osl_v; \ ++}) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#endif ++#endif + -+/* Core register space */ -+#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */ -+#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */ -+#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */ -+#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */ -+#define BCM4710_REG_USB 0x18004000 /* USB core registers */ -+#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */ -+#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */ -+#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */ -+#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */ -+ -+#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */ -+#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */ -+#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */ -+#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */ -+#define BCM4710_PROG 0x1f800000 /* Programable interface */ -+#define BCM4710_FLASH 0x1fc00000 /* Flash */ -+ -+#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300) -+ -+#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000) -+#define BCM4710_LED (BCM4710_EXTIF + 0x00900000) ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) + -+#define SBFLAG_PCI 0 -+#define SBFLAG_ENET0 1 -+#define SBFLAG_ILINE20 2 -+#define SBFLAG_CODEC 3 -+#define SBFLAG_USB 4 -+#define SBFLAG_EXTIF 5 -+#define SBFLAG_ENET1 6 ++/* bcopy, bcmp, and bzero */ ++#define bcopy(src, dst, len) memcpy((dst), (src), (len)) ++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) ++#define bzero(b, len) memset((b), '\0', (len)) + -+#ifdef CONFIG_HWSIM -+#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0) ++/* uncached virtual address */ ++#ifdef mips ++#define OSL_UNCACHED(va) KSEG1ADDR((va)) ++#include +#else -+#define BCM4710_TRACE(trval) ++#define OSL_UNCACHED(va) (va) +#endif + ++/* get processor cycle count */ ++#if defined(mips) ++#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) ++#elif defined(__i386__) ++#define OSL_GETCYCLES(x) rdtscl((x)) ++#else ++#define OSL_GETCYCLES(x) ((x) = 0) ++#endif + -+/* BCM94702 CPCI -ExtIF used for LocalBus devs */ -+ -+#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF -+#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000) -+#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000) -+#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR -+#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000) -+#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000) -+#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ -+#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0) -+ -+#define LED_REG(x) \ -+ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x))) -+ -+/* -+ * Reset function implemented in PLD. Read or write should trigger hard reset -+ */ -+#define SYS_HARD_RESET() \ -+ { for (;;) \ -+ *( (volatile unsigned char *)\ -+ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \ -+ } -+ -+#endif /* _bcm4710_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h 2005-08-28 11:12:20.431859000 +0200 -@@ -0,0 +1,238 @@ -+/* -+ * Broadcom device-specific manifest constants. -+ * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ ++/* dereference an address that may cause a bus exception */ ++#ifdef mips ++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) ++#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") ++#else ++#define BUSPROBE(val, addr) get_dbe((val), (addr)) ++#include ++#endif ++#else ++#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) ++#endif + -+#ifndef _BCMDEVS_H -+#define _BCMDEVS_H ++/* map/unmap physical to virtual I/O */ ++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) ++#define REG_UNMAP(va) iounmap((void *)(va)) + ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) memset((r), '\0', (len)) + -+/* Known PCI vendor Id's */ -+#define VENDOR_EPIGRAM 0xfeda -+#define VENDOR_BROADCOM 0x14e4 -+#define VENDOR_3COM 0x10b7 -+#define VENDOR_NETGEAR 0x1385 -+#define VENDOR_DIAMOND 0x1092 -+#define VENDOR_DELL 0x1028 -+#define VENDOR_HP 0x0e11 -+#define VENDOR_APPLE 0x106b ++/* packet primitives */ ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data) ++#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len) ++#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head)) ++#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) ++#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next) ++#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) ++#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) ++#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) ++#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) ++#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) ++#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) ++#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) ++#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) ++#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) ++#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); ++extern void osl_pktfree(void *skb); + -+/* PCI Device Id's */ -+#define BCM4210_DEVICE_ID 0x1072 /* never used */ -+#define BCM4211_DEVICE_ID 0x4211 -+#define BCM4230_DEVICE_ID 0x1086 /* never used */ -+#define BCM4231_DEVICE_ID 0x4231 ++#else /* BINOSL */ + -+#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */ -+#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */ -+#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */ -+#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */ ++/* string library */ ++#ifndef LINUX_OSL ++#undef printf ++#define printf(fmt, args...) osl_printf((fmt), ## args) ++#undef sprintf ++#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) ++#undef strcmp ++#define strcmp(s1, s2) osl_strcmp((s1), (s2)) ++#undef strncmp ++#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) ++#undef strlen ++#define strlen(s) osl_strlen((s)) ++#undef strcpy ++#define strcpy(d, s) osl_strcpy((d), (s)) ++#undef strncpy ++#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) ++#endif ++extern int osl_printf(const char *format, ...); ++extern int osl_sprintf(char *buf, const char *format, ...); ++extern int osl_strcmp(const char *s1, const char *s2); ++extern int osl_strncmp(const char *s1, const char *s2, uint n); ++extern int osl_strlen(const char *s); ++extern char* osl_strcpy(char *d, const char *s); ++extern char* osl_strncpy(char *d, const char *s, uint n); + -+#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */ -+#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */ ++/* register access macros */ ++#if !defined(BCMJTAG) ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ ++ osl_readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#endif + -+#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */ -+#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */ ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++extern uint8 osl_readb(volatile uint8 *r); ++extern uint16 osl_readw(volatile uint16 *r); ++extern uint32 osl_readl(volatile uint32 *r); ++extern void osl_writeb(uint8 v, volatile uint8 *r); ++extern void osl_writew(uint16 v, volatile uint16 *r); ++extern void osl_writel(uint32 v, volatile uint32 *r); + -+#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */ -+#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */ -+#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */ -+#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */ -+#define BCM47XX_USB_ID 0x4715 /* 47xx usb */ -+#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */ -+#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */ -+#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */ ++/* bcopy, bcmp, and bzero */ ++extern void bcopy(const void *src, void *dst, int len); ++extern int bcmp(const void *b1, const void *b2, int len); ++extern void bzero(void *b, int len); + -+#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */ ++/* uncached virtual address */ ++#define OSL_UNCACHED(va) osl_uncached((va)) ++extern void *osl_uncached(void *va); + -+#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */ -+#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */ -+#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */ -+#define BCM4610_ENET_ID 0x4613 /* 4610 enet */ -+#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */ -+#define BCM4610_USB_ID 0x4615 /* 4610 usb */ ++/* get processor cycle count */ ++#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) ++extern uint osl_getcycles(void); + -+#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */ -+#define BCM4402_ENET_ID 0x4402 /* 4402 enet */ -+#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */ ++/* dereference an address that may target abort */ ++#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) ++extern int osl_busprobe(uint32 *val, uint32 addr); + -+#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */ -+#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */ ++/* map/unmap physical to virtual */ ++#define REG_MAP(pa, size) osl_reg_map((pa), (size)) ++#define REG_UNMAP(va) osl_reg_unmap((va)) ++extern void *osl_reg_map(uint32 pa, uint size); ++extern void osl_reg_unmap(void *va); + -+#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */ -+#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */ -+#define BCM4307_ENET_ID 0x4306 /* 4307 enet */ -+#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */ ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) bzero((r), (len)) + -+#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */ -+#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */ -+#define BCM4306_D11G_ID2 0x4325 -+#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */ -+#define BCM4306_UART_ID 0x4322 /* 4306 uart */ -+#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */ -+#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */ ++/* packet primitives */ ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) osl_pktdata((osh), (skb)) ++#define PKTLEN(osh, skb) osl_pktlen((osh), (skb)) ++#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb)) ++#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb)) ++#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb)) ++#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) ++#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len)) ++#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes)) ++#define PKTDUP(osh, skb) osl_pktdup((osh), (skb)) ++#define PKTCOOKIE(skb) osl_pktcookie((skb)) ++#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) ++#define PKTLINK(skb) osl_pktlink((skb)) ++#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) ++#define PKTPRIO(skb) osl_pktprio((skb)) ++#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); ++extern void osl_pktfree(void *skb); ++extern uchar *osl_pktdata(osl_t *osh, void *skb); ++extern uint osl_pktlen(osl_t *osh, void *skb); ++extern uint osl_pktheadroom(osl_t *osh, void *skb); ++extern uint osl_pkttailroom(osl_t *osh, void *skb); ++extern void *osl_pktnext(osl_t *osh, void *skb); ++extern void osl_pktsetnext(void *skb, void *x); ++extern void osl_pktsetlen(osl_t *osh, void *skb, uint len); ++extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes); ++extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes); ++extern void *osl_pktdup(osl_t *osh, void *skb); ++extern void *osl_pktcookie(void *skb); ++extern void osl_pktsetcookie(void *skb, void *x); ++extern void *osl_pktlink(void *skb); ++extern void osl_pktsetlink(void *skb, void *x); ++extern uint osl_pktprio(void *skb); ++extern void osl_pktsetprio(void *skb, uint x); + -+#define BCM4309_PKG_ID 1 /* 4309 package id */ ++#endif /* BINOSL */ + -+#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */ -+#define BCM4303_PKG_ID 2 /* 4303 package id */ ++#define OSL_ERROR(bcmerror) osl_error(bcmerror) ++extern int osl_error(int bcmerror); + -+#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */ -+#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */ -+#define BCM4310_UART_ID 0x4312 /* 4310 uart */ -+#define BCM4310_ENET_ID 0x4313 /* 4310 enet */ -+#define BCM4310_USB_ID 0x4315 /* 4310 usb */ ++/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ ++#define PKTBUFSZ 2048 + -+#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */ -+#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */ ++#endif /* _linux_osl_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h +--- linux.old/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h 2005-12-15 16:02:45.467929000 +0100 +@@ -0,0 +1,389 @@ ++/* ++ * Linux-specific abstractions to gain some independence from linux kernel versions. ++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */ ++#ifndef _linuxver_h_ ++#define _linuxver_h_ + -+#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */ -+#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */ -+#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */ ++#include ++#include + -+#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) ++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ ++#ifdef __UNDEF_NO_VERSION__ ++#undef __NO_VERSION__ ++#else ++#define __NO_VERSION__ ++#endif ++#endif + -+#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */ ++#if defined(MODULE) && defined(MODVERSIONS) ++#include ++#endif + ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ++#include ++#endif + -+/* PCMCIA vendor Id's */ + -+#define VENDOR_BROADCOM_PCMCIA 0x02d0 ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") ++#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) ++#endif + -+/* SDIO vendor Id's */ -+#define VENDOR_BROADCOM_SDIO 0x00BF ++/* linux/malloc.h is deprecated, use linux/slab.h instead. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) ++#include ++#else ++#include ++#endif + ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+/* boardflags */ -+#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */ -+#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */ -+#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */ -+#define BFL_ENETSPI 0x0010 /* This board has ephy roboswitch spi */ -+#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */ -+#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */ -+#define BFL_ENETVLAN 0x0100 /* This board can do vlan */ ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) ++#include ++#else ++#include ++#ifndef work_struct ++#define work_struct tq_struct ++#endif ++#ifndef INIT_WORK ++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) ++#endif ++#ifndef schedule_work ++#define schedule_work(_work) schedule_task((_work)) ++#endif ++#ifndef flush_scheduled_work ++#define flush_scheduled_work() flush_scheduled_tasks() ++#endif ++#endif + -+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ -+#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */ -+#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */ -+#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */ -+#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ -+#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ -+#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ -+#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ -+#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* Some distributions have their own 2.6.x compatibility layers */ ++#ifndef IRQ_NONE ++typedef void irqreturn_t; ++#define IRQ_NONE ++#define IRQ_HANDLED ++#define IRQ_RETVAL(x) ++#endif ++#else ++typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); ++#endif + -+/* Bus types */ -+#define SB_BUS 0 /* Silicon Backplane */ -+#define PCI_BUS 1 /* PCI target */ -+#define PCMCIA_BUS 2 /* PCMCIA target */ -+#define SDIO_BUS 3 /* SDIO target */ ++#ifndef __exit ++#define __exit ++#endif ++#ifndef __devexit ++#define __devexit ++#endif ++#ifndef __devinit ++#define __devinit __init ++#endif ++#ifndef __devinitdata ++#define __devinitdata ++#endif ++#ifndef __devexit_p ++#define __devexit_p(x) x ++#endif + -+/* Reference Board Types */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) + -+#define BU4710_BOARD 0x0400 -+#define VSIM4710_BOARD 0x0401 -+#define QT4710_BOARD 0x0402 ++#define pci_get_drvdata(dev) (dev)->sysdata ++#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) + -+#define BU4610_BOARD 0x0403 -+#define VSIM4610_BOARD 0x0404 ++/* ++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration ++ */ + -+#define BU4307_BOARD 0x0405 -+#define BCM94301CB_BOARD 0x0406 -+#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */ -+#define BCM94301MP_BOARD 0x0407 -+#define BCM94307MP_BOARD 0x0408 -+#define BCMAP4307_BOARD 0x0409 ++struct pci_device_id { ++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ ++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ ++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ ++ unsigned long driver_data; /* Data private to the driver */ ++}; + -+#define BU4309_BOARD 0x040a -+#define BCM94309CB_BOARD 0x040b -+#define BCM94309MP_BOARD 0x040c -+#define BCM4309AP_BOARD 0x040d ++struct pci_driver { ++ struct list_head node; ++ char *name; ++ const struct pci_device_id *id_table; /* NULL if wants all devices */ ++ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ ++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ ++ void (*suspend)(struct pci_dev *dev); /* Device suspended */ ++ void (*resume)(struct pci_dev *dev); /* Device woken up */ ++}; + -+#define BCM94302MP_BOARD 0x040e ++#define MODULE_DEVICE_TABLE(type, name) ++#define PCI_ANY_ID (~0) + -+#define VSIM4310_BOARD 0x040f -+#define BU4711_BOARD 0x0410 -+#define BCM94310U_BOARD 0x0411 -+#define BCM94310AP_BOARD 0x0412 -+#define BCM94310MP_BOARD 0x0414 ++/* compatpci.c */ ++#define pci_module_init pci_register_driver ++extern int pci_register_driver(struct pci_driver *drv); ++extern void pci_unregister_driver(struct pci_driver *drv); + -+#define BU4306_BOARD 0x0416 -+#define BCM94306CB_BOARD 0x0417 -+#define BCM94306MP_BOARD 0x0418 ++#endif /* PCI registration */ + -+#define BCM94710D_BOARD 0x041a -+#define BCM94710R1_BOARD 0x041b -+#define BCM94710R4_BOARD 0x041c -+#define BCM94710AP_BOARD 0x041d ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) ++#ifdef MODULE ++#define module_init(x) int init_module(void) { return x(); } ++#define module_exit(x) void cleanup_module(void) { x(); } ++#else ++#define module_init(x) __initcall(x); ++#define module_exit(x) __exitcall(x); ++#endif ++#endif + ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) ++#define list_for_each(pos, head) \ ++ for (pos = (head)->next; pos != (head); pos = pos->next) ++#endif + -+#define BU2050_BOARD 0x041f ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) ++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) ++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) ++#endif + ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) ++#define pci_enable_device(dev) do { } while (0) ++#endif + -+#define BCM94309G_BOARD 0x0421 ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) ++#define net_device device ++#endif + -+#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) + -+#define BU4704_BOARD 0x0423 -+#define BU4702_BOARD 0x0424 ++/* ++ * DMA mapping ++ * ++ * See linux/Documentation/DMA-mapping.txt ++ */ + -+#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */ ++#ifndef PCI_DMA_TODEVICE ++#define PCI_DMA_TODEVICE 1 ++#define PCI_DMA_FROMDEVICE 2 ++#endif + -+#define BU4317_BOARD 0x0426 ++typedef u32 dma_addr_t; + ++/* Pure 2^n version of get_order */ ++static inline int get_order(unsigned long size) ++{ ++ int order; + -+#define BCM94702MN_BOARD 0x0428 ++ size = (size-1) >> (PAGE_SHIFT-1); ++ order = -1; ++ do { ++ size >>= 1; ++ order++; ++ } while (size); ++ return order; ++} + -+/* BCM4702 1U CompactPCI Board */ -+#define BCM94702CPCI_BOARD 0x0429 ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, ++ dma_addr_t *dma_handle) ++{ ++ void *ret; ++ int gfp = GFP_ATOMIC | GFP_DMA; + -+/* BCM4702 with BCM95380 VLAN Router */ -+#define BCM95380RR_BOARD 0x042a ++ ret = (void *)__get_free_pages(gfp, get_order(size)); + -+/* cb4306 with SiGe PA */ -+#define BCM94306CBSG_BOARD 0x042b ++ if (ret != NULL) { ++ memset(ret, 0, size); ++ *dma_handle = virt_to_bus(ret); ++ } ++ return ret; ++} ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, ++ void *vaddr, dma_addr_t dma_handle) ++{ ++ free_pages((unsigned long)vaddr, get_order(size)); ++} ++#ifdef ILSIM ++extern uint pci_map_single(void *dev, void *va, uint size, int direction); ++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); ++#else ++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) ++#define pci_unmap_single(cookie, address, size, dir) ++#endif + -+/* mp4301 with 2050 radio */ -+#define BCM94301MPL_BOARD 0x042c ++#endif /* DMA mapping */ + -+/* cb4306 with SiGe PA */ -+#define PCSG94306_BOARD 0x042d ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) + -+/* bu4704 with sdram */ -+#define BU4704SD_BOARD 0x042e ++#define dev_kfree_skb_any(a) dev_kfree_skb(a) ++#define netif_down(dev) do { (dev)->start = 0; } while(0) + -+/* Dual 11a/11g Router */ -+#define BCM94704AGR_BOARD 0x042f ++/* pcmcia-cs provides its own netdevice compatibility layer */ ++#ifndef _COMPAT_NETDEVICE_H + -+/* 11a-only minipci */ -+#define BCM94308MP_BOARD 0x0430 ++/* ++ * SoftNet ++ * ++ * For pre-softnet kernels we need to tell the upper layer not to ++ * re-enter start_xmit() while we are in there. However softnet ++ * guarantees not to enter while we are in there so there is no need ++ * to do the netif_stop_queue() dance unless the transmit queue really ++ * gets stuck. This should also improve performance according to tests ++ * done by Aman Singla. ++ */ + ++#define dev_kfree_skb_irq(a) dev_kfree_skb(a) ++#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) ++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) + ++static inline void netif_start_queue(struct net_device *dev) ++{ ++ dev->tbusy = 0; ++ dev->interrupt = 0; ++ dev->start = 1; ++} + -+/* BCM94317 boards */ -+#define BCM94317CB_BOARD 0x0440 -+#define BCM94317MP_BOARD 0x0441 -+#define BCM94317PCMCIA_BOARD 0x0442 -+#define BCM94317SDIO_BOARD 0x0443 ++#define netif_queue_stopped(dev) (dev)->tbusy ++#define netif_running(dev) (dev)->start + -+#define BU4712_BOARD 0x0444 ++#endif /* _COMPAT_NETDEVICE_H */ + -+/* BCM4712 boards */ -+#define BCM94712AGR_BOARD 0x0445 -+#define BCM94712AP_BOARD 0x0446 ++#define netif_device_attach(dev) netif_start_queue(dev) ++#define netif_device_detach(dev) netif_stop_queue(dev) + -+/* BCM4702 boards */ -+#define CT4702AP_BOARD 0x0447 ++/* 2.4.x renamed bottom halves to tasklets */ ++#define tasklet_struct tq_struct ++static inline void tasklet_schedule(struct tasklet_struct *tasklet) ++{ ++ queue_task(tasklet, &tq_immediate); ++ mark_bh(IMMEDIATE_BH); ++} + -+#endif /* _BCMDEVS_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h 2005-08-28 11:12:20.431859000 +0200 -@@ -0,0 +1,125 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * local version of endian.h - byte order defines -+ ******************************************************************************/ ++static inline void tasklet_init(struct tasklet_struct *tasklet, ++ void (*func)(unsigned long), ++ unsigned long data) ++{ ++ tasklet->next = NULL; ++ tasklet->sync = 0; ++ tasklet->routine = (void (*)(void *))func; ++ tasklet->data = (void *)data; ++} ++#define tasklet_kill(tasklet) {do{} while(0);} + -+#ifndef _BCMENDIAN_H_ -+#define _BCMENDIAN_H_ ++/* 2.4.x introduced del_timer_sync() */ ++#define del_timer_sync(timer) del_timer(timer) + -+#include ++#else + -+/* Byte swap a 16 bit value */ -+#define BCMSWAP16(val) \ -+ ((uint16)( \ -+ (((uint16)(val) & (uint16)0x00ffU) << 8) | \ -+ (((uint16)(val) & (uint16)0xff00U) >> 8) )) -+ -+/* Byte swap a 32 bit value */ -+#define BCMSWAP32(val) \ -+ ((uint32)( \ -+ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \ -+ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \ -+ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \ -+ (((uint32)(val) & (uint32)0xff000000UL) >> 24) )) ++#define netif_down(dev) + -+static INLINE uint16 -+bcmswap16(uint16 val) -+{ -+ return BCMSWAP16(val); -+} ++#endif /* SoftNet */ + -+static INLINE uint32 -+bcmswap32(uint32 val) ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) ++ ++/* ++ * Emit code to initialise a tq_struct's routine and data pointers ++ */ ++#define PREPARE_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ (_tq)->routine = _routine; \ ++ (_tq)->data = _data; \ ++ } while (0) ++ ++/* ++ * Emit code to initialise all of a tq_struct ++ */ ++#define INIT_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ INIT_LIST_HEAD(&(_tq)->list); \ ++ (_tq)->sync = 0; \ ++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ ++ } while (0) ++ ++#endif ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) ++ ++/* Power management related routines */ ++ ++static inline int ++pci_save_state(struct pci_dev *dev, u32 *buffer) +{ -+ return BCMSWAP32(val); ++ int i; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_read_config_dword(dev, i * 4,&buffer[i]); ++ } ++ return 0; +} + -+/* buf - start of buffer of shorts to swap */ -+/* len - byte length of buffer */ -+static INLINE void -+bcmswap16_buf(uint16 *buf, uint len) ++static inline int ++pci_restore_state(struct pci_dev *dev, u32 *buffer) +{ -+ len = len/2; ++ int i; + -+ while(len--){ -+ *buf = bcmswap16(*buf); -+ buf++; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_write_config_dword(dev,i * 4, buffer[i]); ++ } ++ /* ++ * otherwise, write the context information we know from bootup. ++ * This works around a problem where warm-booting from Windows ++ * combined with a D3(hot)->D0 transition causes PCI config ++ * header data to be forgotten. ++ */ ++ else { ++ for (i = 0; i < 6; i ++) ++ pci_write_config_dword(dev, ++ PCI_BASE_ADDRESS_0 + (i * 4), ++ pci_resource_start(dev, i)); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } ++ return 0; +} + -+#ifndef hton16 -+#ifndef IL_BIGENDIAN -+#define HTON16(i) BCMSWAP16(i) -+#define hton16(i) bcmswap16(i) -+#define hton32(i) bcmswap32(i) -+#define ntoh16(i) bcmswap16(i) -+#define ntoh32(i) bcmswap32(i) -+#define ltoh16(i) (i) -+#define ltoh32(i) (i) -+#define htol16(i) (i) -+#define htol32(i) (i) -+#else -+#define HTON16(i) (i) -+#define hton16(i) (i) -+#define hton32(i) (i) -+#define ntoh16(i) (i) -+#define ntoh32(i) (i) -+#define ltoh16(i) bcmswap16(i) -+#define ltoh32(i) bcmswap32(i) -+#define htol16(i) bcmswap16(i) -+#define htol32(i) bcmswap32(i) -+#endif ++#endif /* PCI power management */ ++ ++/* Old cp0 access macros deprecated in 2.4.19 */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) ++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) +#endif + -+#ifndef IL_BIGENDIAN -+#define ltoh16_buf(buf, i) -+#define htol16_buf(buf, i) ++/* Module refcount handled internally in 2.6.x */ ++#ifndef SET_MODULE_OWNER ++#define SET_MODULE_OWNER(dev) do {} while (0) ++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT ++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT +#else -+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) -+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i) ++#define OLD_MOD_INC_USE_COUNT do {} while (0) ++#define OLD_MOD_DEC_USE_COUNT do {} while (0) +#endif + -+/* -+* load 16-bit value from unaligned little endian byte array. -+*/ -+static INLINE uint16 -+ltoh16_ua(uint8 *bytes) -+{ -+ return (bytes[1]<<8)+bytes[0]; -+} -+ -+/* -+* load 32-bit value from unaligned little endian byte array. -+*/ -+static INLINE uint32 -+ltoh32_ua(uint8 *bytes) -+{ -+ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0]; -+} ++#ifndef SET_NETDEV_DEV ++#define SET_NETDEV_DEV(net, pdev) do {} while (0) ++#endif + -+/* -+* load 16-bit value from unaligned big(network) endian byte array. -+*/ -+static INLINE uint16 -+ntoh16_ua(uint8 *bytes) -+{ -+ return (bytes[0]<<8)+bytes[1]; -+} ++#ifndef HAVE_FREE_NETDEV ++#define free_netdev(dev) kfree(dev) ++#endif + -+/* -+* load 32-bit value from unaligned big(network) endian byte array. -+*/ -+static INLINE uint32 -+ntoh32_ua(uint8 *bytes) -+{ -+ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3]; -+} ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* struct packet_type redefined in 2.6.x */ ++#define af_packet_priv data ++#endif + -+#endif /* _BCMENDIAN_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-08-28 11:12:20.432858848 +0200 -@@ -0,0 +1,229 @@ ++#endif /* _linuxver_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h +--- linux.old/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h 2005-12-15 16:47:29.886633750 +0100 +@@ -0,0 +1,552 @@ +/* -+ * Hardware-specific definitions for -+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores. ++ * HND Run Time Environment for standalone MIPS programs. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + -+#ifndef _bcmenet_47xx_h_ -+#define _bcmenet_47xx_h_ -+ -+#include -+#include ++#ifndef _MISPINC_H ++#define _MISPINC_H ++ ++ ++/* MIPS defines */ ++ ++#ifdef _LANGUAGE_ASSEMBLY ++ ++/* ++ * Symbolic register names for 32 bit ABI ++ */ ++#define zero $0 /* wired zero */ ++#define AT $1 /* assembler temp - uppercase because of ".set at" */ ++#define v0 $2 /* return value */ ++#define v1 $3 ++#define a0 $4 /* argument registers */ ++#define a1 $5 ++#define a2 $6 ++#define a3 $7 ++#define t0 $8 /* caller saved */ ++#define t1 $9 ++#define t2 $10 ++#define t3 $11 ++#define t4 $12 ++#define t5 $13 ++#define t6 $14 ++#define t7 $15 ++#define s0 $16 /* callee saved */ ++#define s1 $17 ++#define s2 $18 ++#define s3 $19 ++#define s4 $20 ++#define s5 $21 ++#define s6 $22 ++#define s7 $23 ++#define t8 $24 /* caller saved */ ++#define t9 $25 ++#define jp $25 /* PIC jump register */ ++#define k0 $26 /* kernel scratch */ ++#define k1 $27 ++#define gp $28 /* global pointer */ ++#define sp $29 /* stack pointer */ ++#define fp $30 /* frame pointer */ ++#define s8 $30 /* same like fp! */ ++#define ra $31 /* return address */ ++ ++ ++/* ++ * CP0 Registers ++ */ ++ ++#define C0_INX $0 ++#define C0_RAND $1 ++#define C0_TLBLO0 $2 ++#define C0_TLBLO C0_TLBLO0 ++#define C0_TLBLO1 $3 ++#define C0_CTEXT $4 ++#define C0_PGMASK $5 ++#define C0_WIRED $6 ++#define C0_BADVADDR $8 ++#define C0_COUNT $9 ++#define C0_TLBHI $10 ++#define C0_COMPARE $11 ++#define C0_SR $12 ++#define C0_STATUS C0_SR ++#define C0_CAUSE $13 ++#define C0_EPC $14 ++#define C0_PRID $15 ++#define C0_CONFIG $16 ++#define C0_LLADDR $17 ++#define C0_WATCHLO $18 ++#define C0_WATCHHI $19 ++#define C0_XCTEXT $20 ++#define C0_DIAGNOSTIC $22 ++#define C0_BROADCOM C0_DIAGNOSTIC ++#define C0_PERFORMANCE $25 ++#define C0_ECC $26 ++#define C0_CACHEERR $27 ++#define C0_TAGLO $28 ++#define C0_TAGHI $29 ++#define C0_ERREPC $30 ++#define C0_DESAVE $31 ++ ++/* ++ * LEAF - declare leaf routine ++ */ ++#define LEAF(symbol) \ ++ .globl symbol; \ ++ .align 2; \ ++ .type symbol,@function; \ ++ .ent symbol,0; \ ++symbol: .frame sp,0,ra ++ ++/* ++ * END - mark end of function ++ */ ++#define END(function) \ ++ .end function; \ ++ .size function,.-function ++ ++#define _ULCAST_ + -+#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */ -+#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */ -+#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */ -+#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */ ++#else + -+/* power management event wakeup pattern constants */ -+#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */ -+#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */ -+#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */ -+#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */ -+#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */ ++/* ++ * The following macros are especially useful for __asm__ ++ * inline assembler. ++ */ ++#ifndef __STR ++#define __STR(x) #x ++#endif ++#ifndef STR ++#define STR(x) __STR(x) ++#endif + -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ ++#define _ULCAST_ (unsigned long) + -+/* sometimes you just need the enet mib definitions */ -+#include + +/* -+ * Host Interface Registers ++ * CP0 Registers + */ -+typedef volatile struct _bcmenettregs { -+ /* Device and Power Control */ -+ uint32 devcontrol; -+ uint32 PAD[2]; -+ uint32 biststatus; -+ uint32 wakeuplength; -+ uint32 PAD[3]; -+ -+ /* Interrupt Control */ -+ uint32 intstatus; -+ uint32 intmask; -+ uint32 gptimer; -+ uint32 PAD[23]; -+ -+ /* Ethernet MAC Address Filtering Control */ -+ uint32 PAD[2]; -+ uint32 enetftaddr; -+ uint32 enetftdata; -+ uint32 PAD[2]; -+ -+ /* Ethernet MAC Control */ -+ uint32 emactxmaxburstlen; -+ uint32 emacrxmaxburstlen; -+ uint32 emaccontrol; -+ uint32 emacflowcontrol; + -+ uint32 PAD[20]; ++#define C0_INX 0 /* CP0: TLB Index */ ++#define C0_RAND 1 /* CP0: TLB Random */ ++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ ++#define C0_CTEXT 4 /* CP0: Context */ ++#define C0_PGMASK 5 /* CP0: TLB PageMask */ ++#define C0_WIRED 6 /* CP0: TLB Wired */ ++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ ++#define C0_COUNT 9 /* CP0: Count */ ++#define C0_TLBHI 10 /* CP0: TLB EntryHi */ ++#define C0_COMPARE 11 /* CP0: Compare */ ++#define C0_SR 12 /* CP0: Processor Status */ ++#define C0_STATUS C0_SR /* CP0: Processor Status */ ++#define C0_CAUSE 13 /* CP0: Exception Cause */ ++#define C0_EPC 14 /* CP0: Exception PC */ ++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ ++#define C0_CONFIG 16 /* CP0: Config */ ++#define C0_LLADDR 17 /* CP0: LLAddr */ ++#define C0_WATCHLO 18 /* CP0: WatchpointLo */ ++#define C0_WATCHHI 19 /* CP0: WatchpointHi */ ++#define C0_XCTEXT 20 /* CP0: XContext */ ++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ ++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ ++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ ++#define C0_ECC 26 /* CP0: ECC */ ++#define C0_CACHEERR 27 /* CP0: CacheErr */ ++#define C0_TAGLO 28 /* CP0: TagLo */ ++#define C0_TAGHI 29 /* CP0: TagHi */ ++#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++#define C0_DESAVE 31 /* CP0: DebugSave */ + -+ /* DMA Lazy Interrupt Control */ -+ uint32 intrecvlazy; -+ uint32 PAD[63]; ++#endif /* _LANGUAGE_ASSEMBLY */ + -+ /* DMA engine */ -+ dmaregs_t dmaregs; -+ dmafifo_t dmafifo; -+ uint32 PAD[116]; ++/* ++ * Memory segments (32bit kernel mode addresses) ++ */ ++#undef KUSEG ++#undef KSEG0 ++#undef KSEG1 ++#undef KSEG2 ++#undef KSEG3 ++#define KUSEG 0x00000000 ++#define KSEG0 0x80000000 ++#define KSEG1 0xa0000000 ++#define KSEG2 0xc0000000 ++#define KSEG3 0xe0000000 ++#define PHYSADDR_MASK 0x1fffffff + -+ /* EMAC Registers */ -+ uint32 rxconfig; -+ uint32 rxmaxlength; -+ uint32 txmaxlength; -+ uint32 PAD; -+ uint32 mdiocontrol; -+ uint32 mdiodata; -+ uint32 emacintmask; -+ uint32 emacintstatus; -+ uint32 camdatalo; -+ uint32 camdatahi; -+ uint32 camcontrol; -+ uint32 enetcontrol; -+ uint32 txcontrol; -+ uint32 txwatermark; -+ uint32 mibcontrol; -+ uint32 PAD[49]; -+ -+ /* EMAC MIB counters */ -+ bcmenetmib_t mib; -+ -+ uint32 PAD[585]; -+ -+ /* Sonics SiliconBackplane config registers */ -+ sbconfig_t sbconfig; -+} bcmenetregs_t; -+ -+/* device control */ -+#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */ -+#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */ -+#define DC_ER ((uint32)1 << 15) /* ephy reset */ -+#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */ -+#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */ -+#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */ -+#define DC_PA_SHIFT 18 -+ -+/* wakeup length */ -+#define WL_P0_MASK 0x7f /* pattern 0 */ -+#define WL_D0 ((uint32)1 << 7) -+#define WL_P1_MASK 0x7f00 /* pattern 1 */ -+#define WL_P1_SHIFT 8 -+#define WL_D1 ((uint32)1 << 15) -+#define WL_P2_MASK 0x7f0000 /* pattern 2 */ -+#define WL_P2_SHIFT 16 -+#define WL_D2 ((uint32)1 << 23) -+#define WL_P3_MASK 0x7f000000 /* pattern 3 */ -+#define WL_P3_SHIFT 24 -+#define WL_D3 ((uint32)1 << 31) -+ -+/* intstatus and intmask */ -+#define I_PME ((uint32)1 << 6) /* power management event */ -+#define I_TO ((uint32)1 << 7) /* general purpose timeout */ -+#define I_PC ((uint32)1 << 10) /* descriptor error */ -+#define I_PD ((uint32)1 << 11) /* data error */ -+#define I_DE ((uint32)1 << 12) /* descriptor protocol error */ -+#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */ -+#define I_RO ((uint32)1 << 14) /* receive fifo overflow */ -+#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */ -+#define I_RI ((uint32)1 << 16) /* receive interrupt */ -+#define I_XI ((uint32)1 << 24) /* transmit interrupt */ -+#define I_EM ((uint32)1 << 26) /* emac interrupt */ -+#define I_MW ((uint32)1 << 27) /* mii write */ -+#define I_MR ((uint32)1 << 28) /* mii read */ -+ -+/* emaccontrol */ -+#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */ -+#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */ -+#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */ -+#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */ -+#define EMC_LC_SHIFT 5 -+ -+/* emacflowcontrol */ -+#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */ -+#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */ -+ -+/* interrupt receive lazy */ -+#define IRL_TO_MASK 0x00ffffff /* timeout */ -+#define IRL_FC_MASK 0xff000000 /* frame count */ -+#define IRL_FC_SHIFT 24 /* frame count */ -+ -+/* emac receive config */ -+#define ERC_DB ((uint32)1 << 0) /* disable broadcast */ -+#define ERC_AM ((uint32)1 << 1) /* accept all multicast */ -+#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */ -+#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */ -+#define ERC_LE ((uint32)1 << 4) /* loopback enable */ -+#define ERC_FE ((uint32)1 << 5) /* enable flow control */ -+#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */ -+#define ERC_RF ((uint32)1 << 7) /* reject filter */ -+ -+/* emac mdio control */ -+#define MC_MF_MASK 0x7f /* mdc frequency */ -+#define MC_PE ((uint32)1 << 7) /* mii preamble enable */ -+ -+/* emac mdio data */ -+#define MD_DATA_MASK 0xffff /* r/w data */ -+#define MD_TA_MASK 0x30000 /* turnaround value */ -+#define MD_TA_SHIFT 16 -+#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */ -+#define MD_RA_MASK 0x7c0000 /* register address */ -+#define MD_RA_SHIFT 18 -+#define MD_PMD_MASK 0xf800000 /* physical media device */ -+#define MD_PMD_SHIFT 23 -+#define MD_OP_MASK 0x30000000 /* opcode */ -+#define MD_OP_SHIFT 28 -+#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */ -+#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */ -+#define MD_SB_MASK 0xc0000000 /* start bits */ -+#define MD_SB_SHIFT 30 -+#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */ -+ -+/* emac intstatus and intmask */ -+#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */ -+#define EI_MIB ((uint32)1 << 1) /* mib interrupt */ -+#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */ -+ -+/* emac cam data high */ -+#define CD_V ((uint32)1 << 16) /* valid bit */ -+ -+/* emac cam control */ -+#define CC_CE ((uint32)1 << 0) /* cam enable */ -+#define CC_MS ((uint32)1 << 1) /* mask select */ -+#define CC_RD ((uint32)1 << 2) /* read */ -+#define CC_WR ((uint32)1 << 3) /* write */ -+#define CC_INDEX_MASK 0x3f0000 /* index */ -+#define CC_INDEX_SHIFT 16 -+#define CC_CB ((uint32)1 << 31) /* cam busy */ -+ -+/* emac ethernet control */ -+#define EC_EE ((uint32)1 << 0) /* emac enable */ -+#define EC_ED ((uint32)1 << 1) /* emac disable */ -+#define EC_ES ((uint32)1 << 2) /* emac soft reset */ -+#define EC_EP ((uint32)1 << 3) /* external phy select */ -+ -+/* emac transmit control */ -+#define EXC_FD ((uint32)1 << 0) /* full duplex */ -+#define EXC_FM ((uint32)1 << 1) /* flowmode */ -+#define EXC_SB ((uint32)1 << 2) /* single backoff enable */ -+#define EXC_SS ((uint32)1 << 3) /* small slottime */ -+ -+/* emac mib control */ -+#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */ -+ -+/* sometimes you just need the enet rxheader definitions */ -+#include -+ -+#endif /* _bcmenet_47xx_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-08-28 11:12:20.432858848 +0200 -@@ -0,0 +1,81 @@ +/* -+ * Hardware-specific MIB definition for -+ * Broadcom Home Networking Division -+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Map an address to a certain kernel segment + */ ++#undef PHYSADDR ++#undef KSEG0ADDR ++#undef KSEG1ADDR ++#undef KSEG2ADDR ++#undef KSEG3ADDR + -+#ifndef _bcmenetmib_h_ -+#define _bcmenetmib_h_ ++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) ++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) ++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) ++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) ++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) + -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ + ++#ifndef Index_Invalidate_I +/* -+ * EMAC MIB Registers -+ */ -+typedef volatile struct { -+ uint32 tx_good_octets; -+ uint32 tx_good_pkts; -+ uint32 tx_octets; -+ uint32 tx_pkts; -+ uint32 tx_broadcast_pkts; -+ uint32 tx_multicast_pkts; -+ uint32 tx_len_64; -+ uint32 tx_len_65_to_127; -+ uint32 tx_len_128_to_255; -+ uint32 tx_len_256_to_511; -+ uint32 tx_len_512_to_1023; -+ uint32 tx_len_1024_to_max; -+ uint32 tx_jabber_pkts; -+ uint32 tx_oversize_pkts; -+ uint32 tx_fragment_pkts; -+ uint32 tx_underruns; -+ uint32 tx_total_cols; -+ uint32 tx_single_cols; -+ uint32 tx_multiple_cols; -+ uint32 tx_excessive_cols; -+ uint32 tx_late_cols; -+ uint32 tx_defered; -+ uint32 tx_carrier_lost; -+ uint32 tx_pause_pkts; -+ uint32 PAD[8]; -+ -+ uint32 rx_good_octets; -+ uint32 rx_good_pkts; -+ uint32 rx_octets; -+ uint32 rx_pkts; -+ uint32 rx_broadcast_pkts; -+ uint32 rx_multicast_pkts; -+ uint32 rx_len_64; -+ uint32 rx_len_65_to_127; -+ uint32 rx_len_128_to_255; -+ uint32 rx_len_256_to_511; -+ uint32 rx_len_512_to_1023; -+ uint32 rx_len_1024_to_max; -+ uint32 rx_jabber_pkts; -+ uint32 rx_oversize_pkts; -+ uint32 rx_fragment_pkts; -+ uint32 rx_missed_pkts; -+ uint32 rx_crc_align_errs; -+ uint32 rx_undersize; -+ uint32 rx_crc_errs; -+ uint32 rx_align_errs; -+ uint32 rx_symbol_errs; -+ uint32 rx_pause_pkts; -+ uint32 rx_nonpause_pkts; -+} bcmenetmib_t; -+ -+#endif /* _bcmenetmib_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-08-28 11:12:20.433858696 +0200 -@@ -0,0 +1,43 @@ -+/* -+ * Hardware-specific Receive Data Header for the -+ * Broadcom Home Networking Division -+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Cache Operations + */ ++#define Index_Invalidate_I 0x00 ++#define Index_Writeback_Inv_D 0x01 ++#define Index_Invalidate_SI 0x02 ++#define Index_Writeback_Inv_SD 0x03 ++#define Index_Load_Tag_I 0x04 ++#define Index_Load_Tag_D 0x05 ++#define Index_Load_Tag_SI 0x06 ++#define Index_Load_Tag_SD 0x07 ++#define Index_Store_Tag_I 0x08 ++#define Index_Store_Tag_D 0x09 ++#define Index_Store_Tag_SI 0x0A ++#define Index_Store_Tag_SD 0x0B ++#define Create_Dirty_Excl_D 0x0d ++#define Create_Dirty_Excl_SD 0x0f ++#define Hit_Invalidate_I 0x10 ++#define Hit_Invalidate_D 0x11 ++#define Hit_Invalidate_SI 0x12 ++#define Hit_Invalidate_SD 0x13 ++#define Fill_I 0x14 ++#define Hit_Writeback_Inv_D 0x15 ++ /* 0x16 is unused */ ++#define Hit_Writeback_Inv_SD 0x17 ++#define R5K_Page_Invalidate_S 0x17 ++#define Hit_Writeback_I 0x18 ++#define Hit_Writeback_D 0x19 ++ /* 0x1a is unused */ ++#define Hit_Writeback_SD 0x1b ++ /* 0x1c is unused */ ++ /* 0x1e is unused */ ++#define Hit_Set_Virtual_SI 0x1e ++#define Hit_Set_Virtual_SD 0x1f ++#endif + -+#ifndef _bcmenetrxh_h_ -+#define _bcmenetrxh_h_ + +/* -+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header -+ * with every frame consisting of -+ * 16bits of frame length, followed by -+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined. ++ * R4x00 interrupt enable / cause bits + */ -+typedef volatile struct { -+ uint16 len; -+ uint16 flags; -+ uint16 pad[12]; -+} bcmenetrxh_t; -+ -+#define RXHDR_LEN 28 -+ -+#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */ -+#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */ -+#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */ -+#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */ -+#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */ -+#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */ -+#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */ -+#define RXF_CRC ((uint16)1 << 1) /* crc error */ -+#define RXF_OV ((uint16)1 << 0) /* fifo overflow */ -+ -+#endif /* _bcmenetrxh_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-08-28 11:12:20.433858696 +0200 -@@ -0,0 +1,131 @@ ++#define IE_SW0 (_ULCAST_(1) << 8) ++#define IE_SW1 (_ULCAST_(1) << 9) ++#define IE_IRQ0 (_ULCAST_(1) << 10) ++#define IE_IRQ1 (_ULCAST_(1) << 11) ++#define IE_IRQ2 (_ULCAST_(1) << 12) ++#define IE_IRQ3 (_ULCAST_(1) << 13) ++#define IE_IRQ4 (_ULCAST_(1) << 14) ++#define IE_IRQ5 (_ULCAST_(1) << 15) ++ ++#ifndef ST0_UM +/* -+ * NVRAM variable manipulation -+ * -+ * $Copyright Open Broadcom Corporation$ -+ * -+ * $Id: bcmnvram.h,v 1.1.1.1 2004/01/21 03:50:44 gigis Exp $ ++ * Bitfields in the mips32 cp0 status register + */ ++#define ST0_IE 0x00000001 ++#define ST0_EXL 0x00000002 ++#define ST0_ERL 0x00000004 ++#define ST0_UM 0x00000010 ++#define ST0_SWINT0 0x00000100 ++#define ST0_SWINT1 0x00000200 ++#define ST0_HWINT0 0x00000400 ++#define ST0_HWINT1 0x00000800 ++#define ST0_HWINT2 0x00001000 ++#define ST0_HWINT3 0x00002000 ++#define ST0_HWINT4 0x00004000 ++#define ST0_HWINT5 0x00008000 ++#define ST0_IM 0x0000ff00 ++#define ST0_NMI 0x00080000 ++#define ST0_SR 0x00100000 ++#define ST0_TS 0x00200000 ++#define ST0_BEV 0x00400000 ++#define ST0_RE 0x02000000 ++#define ST0_RP 0x08000000 ++#define ST0_CU 0xf0000000 ++#define ST0_CU0 0x10000000 ++#define ST0_CU1 0x20000000 ++#define ST0_CU2 0x40000000 ++#define ST0_CU3 0x80000000 ++#endif + -+#ifndef _bcmnvram_h_ -+#define _bcmnvram_h_ + -+#ifndef _LANGUAGE_ASSEMBLY ++/* ++ * Bitfields in the mips32 cp0 cause register ++ */ ++#define C_EXC 0x0000007c ++#define C_EXC_SHIFT 2 ++#define C_INT 0x0000ff00 ++#define C_INT_SHIFT 8 ++#define C_SW0 (_ULCAST_(1) << 8) ++#define C_SW1 (_ULCAST_(1) << 9) ++#define C_IRQ0 (_ULCAST_(1) << 10) ++#define C_IRQ1 (_ULCAST_(1) << 11) ++#define C_IRQ2 (_ULCAST_(1) << 12) ++#define C_IRQ3 (_ULCAST_(1) << 13) ++#define C_IRQ4 (_ULCAST_(1) << 14) ++#define C_IRQ5 (_ULCAST_(1) << 15) ++#define C_WP 0x00400000 ++#define C_IV 0x00800000 ++#define C_CE 0x30000000 ++#define C_CE_SHIFT 28 ++#define C_BD 0x80000000 ++ ++/* Values in C_EXC */ ++#define EXC_INT 0 ++#define EXC_TLBM 1 ++#define EXC_TLBL 2 ++#define EXC_TLBS 3 ++#define EXC_AEL 4 ++#define EXC_AES 5 ++#define EXC_IBE 6 ++#define EXC_DBE 7 ++#define EXC_SYS 8 ++#define EXC_BPT 9 ++#define EXC_RI 10 ++#define EXC_CU 11 ++#define EXC_OV 12 ++#define EXC_TR 13 ++#define EXC_WATCH 23 ++#define EXC_MCHK 24 ++ ++ ++/* ++ * Bits in the cp0 config register. ++ */ ++#define CONF_CM_CACHABLE_NO_WA 0 ++#define CONF_CM_CACHABLE_WA 1 ++#define CONF_CM_UNCACHED 2 ++#define CONF_CM_CACHABLE_NONCOHERENT 3 ++#define CONF_CM_CACHABLE_CE 4 ++#define CONF_CM_CACHABLE_COW 5 ++#define CONF_CM_CACHABLE_CUW 6 ++#define CONF_CM_CACHABLE_ACCELERATED 7 ++#define CONF_CM_CMASK 7 ++#define CONF_CU (_ULCAST_(1) << 3) ++#define CONF_DB (_ULCAST_(1) << 4) ++#define CONF_IB (_ULCAST_(1) << 5) ++#define CONF_SE (_ULCAST_(1) << 12) ++#define CONF_SC (_ULCAST_(1) << 17) ++#define CONF_AC (_ULCAST_(1) << 23) ++#define CONF_HALT (_ULCAST_(1) << 25) ++ ++ ++/* ++ * Bits in the cp0 config register select 1. ++ */ ++#define CONF1_FP 0x00000001 /* FPU present */ ++#define CONF1_EP 0x00000002 /* EJTAG present */ ++#define CONF1_CA 0x00000004 /* mips16 implemented */ ++#define CONF1_WR 0x00000008 /* Watch registers present */ ++#define CONF1_PC 0x00000010 /* Performance counters present */ ++#define CONF1_DA_SHIFT 7 /* D$ associativity */ ++#define CONF1_DA_MASK 0x00000380 ++#define CONF1_DA_BASE 1 ++#define CONF1_DL_SHIFT 10 /* D$ line size */ ++#define CONF1_DL_MASK 0x00001c00 ++#define CONF1_DL_BASE 2 ++#define CONF1_DS_SHIFT 13 /* D$ sets/way */ ++#define CONF1_DS_MASK 0x0000e000 ++#define CONF1_DS_BASE 64 ++#define CONF1_IA_SHIFT 16 /* I$ associativity */ ++#define CONF1_IA_MASK 0x00070000 ++#define CONF1_IA_BASE 1 ++#define CONF1_IL_SHIFT 19 /* I$ line size */ ++#define CONF1_IL_MASK 0x00380000 ++#define CONF1_IL_BASE 2 ++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ ++#define CONF1_IS_MASK 0x01c00000 ++#define CONF1_IS_BASE 64 ++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ ++#define CONF1_MS_SHIFT 25 ++ ++/* PRID register */ ++#define PRID_COPT_MASK 0xff000000 ++#define PRID_COMP_MASK 0x00ff0000 ++#define PRID_IMP_MASK 0x0000ff00 ++#define PRID_REV_MASK 0x000000ff ++ ++#define PRID_COMP_LEGACY 0x000000 ++#define PRID_COMP_MIPS 0x010000 ++#define PRID_COMP_BROADCOM 0x020000 ++#define PRID_COMP_ALCHEMY 0x030000 ++#define PRID_COMP_SIBYTE 0x040000 ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++#define PRID_IMP_BCM3303 0x9100 ++ ++#define PRID_IMP_UNKNOWN 0xff00 ++ ++#define BCM330X(id) \ ++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ ++ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) ++ ++/* Bits in C0_BROADCOM */ ++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ ++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ ++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ ++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ ++ ++/* PreFetch Cache aka Read Ahead Cache */ ++ ++#define PFC_CR0 0xff400000 /* control reg 0 */ ++#define PFC_CR1 0xff400004 /* control reg 1 */ ++ ++/* PFC operations */ ++#define PFC_I 0x00000001 /* Enable PFC use for instructions */ ++#define PFC_D 0x00000002 /* Enable PFC use for data */ ++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ ++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ ++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ ++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ ++#define PFC_DPF 0x00000040 /* Enable directional prefetching */ ++#define PFC_FLUSH 0x00000100 /* Flush the PFC */ ++#define PFC_BRR 0x40000000 /* Bus error indication */ ++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ ++ ++/* Handy defaults */ ++#define PFC_DISABLED 0 ++#define PFC_AUTO 0xffffffff /* auto select the default mode */ ++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) ++#define PFC_INST_NOPF (PFC_I | PFC_CINV) ++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) ++#define PFC_DATA_NOPF (PFC_D | PFC_CINV) ++#define PFC_I_AND_D (PFC_INST | PFC_DATA) ++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) + -+#include + -+struct nvram_header { -+ uint32 magic; -+ uint32 len; -+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */ -+ uint32 config_refresh; /* 0:15 config, 16:31 refresh */ -+ uint32 config_ncdl; /* ncdl values for memc */ -+}; ++/* ++ * These are the UART port assignments, expressed as offsets from the base ++ * register. These assignments should hold for any serial port based on ++ * a 8250, 16450, or 16550(A). ++ */ + -+struct nvram_tuple { -+ char *name; -+ char *value; -+ struct nvram_tuple *next; -+}; ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_RXRDY 0x01 /* Receiver ready */ + -+/* -+ * Initialize NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern int nvram_init(void *sbh); + -+/* -+ * Disable NVRAM access. May be unnecessary or undefined on certain -+ * platforms. -+ */ -+extern void nvram_exit(void); ++#ifndef _LANGUAGE_ASSEMBLY + +/* -+ * Get the value of an NVRAM variable. The pointer returned may be -+ * invalid after a set. -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined ++ * Macros to access the system control coprocessor + */ -+extern char * nvram_get(const char *name); + -+/* -+ * Get the value of an NVRAM variable. -+ * @param name name of variable to get -+ * @return value of variable or NUL if undefined -+ */ -+#define nvram_safe_get(name) (nvram_get(name) ? : "") ++#define MFC0(source, sel) \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ ++ "move\t%0,$1\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res) \ ++ : \ ++ :"$1"); \ ++ __res; \ ++}) + -+/* -+ * Match an NVRAM variable. -+ * @param name name of variable to match -+ * @param match value to compare against value of variable -+ * @return TRUE if variable is defined and its value is string equal -+ * to match or FALSE otherwise -+ */ -+static INLINE int -+nvram_match(char *name, char *match) { -+ const char *value = nvram_get(name); -+ return (value && !strcmp(value, match)); ++#define MTC0(source, sel, value) \ ++do { \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "move\t$1,%z0\n\t" \ ++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ : \ ++ :"jr" (value) \ ++ :"$1"); \ ++} while (0) ++ ++#define get_c0_count() \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "mfc0\t%0,$9\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res)); \ ++ __res; \ ++}) ++ ++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; ++ ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) ++ lsz = CONF1_IL_BASE << lsz; ++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); ++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; +} + -+/* -+ * Inversely match an NVRAM variable. -+ * @param name name of variable to match -+ * @param match value to compare against value of variable -+ * @return TRUE if variable is defined and its value is not string -+ * equal to invmatch or FALSE otherwise -+ */ -+static INLINE int -+nvram_invmatch(char *name, char *invmatch) { -+ const char *value = nvram_get(name); -+ return (value && strcmp(value, invmatch)); ++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; ++ ++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) ++ lsz = CONF1_DL_BASE << lsz; ++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); ++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; +} + -+/* -+ * Set the value of an NVRAM variable. The name and value strings are -+ * copied into private storage. Pointers to previously set values -+ * may become invalid. The new value may be immediately -+ * retrieved but will not be permanently stored until a commit. -+ * @param name name of variable to set -+ * @param value value of variable -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_set(const char *name, const char *value); ++#define cache_op(base, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, (%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + -+/* -+ * Unset an NVRAM variable. Pointers to previously set values -+ * remain valid until a set. -+ * @param name name of variable to unset -+ * @return 0 on success and errno on failure -+ * NOTE: use nvram_commit to commit this change to flash. -+ */ -+extern int nvram_unset(const char *name); ++#define cache_unroll4(base, delta, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1,0(%0); \ ++ cache %1,delta(%0); \ ++ cache %1,(2 * delta)(%0); \ ++ cache %1,(3 * delta)(%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + -+/* -+ * Commit NVRAM variables to permanent storage. All pointers to values -+ * may be invalid after a commit. -+ * NVRAM values are undefined after a commit. -+ * @return 0 on success and errno on failure -+ */ -+extern int nvram_commit(void); ++#endif /* !_LANGUAGE_ASSEMBLY */ + ++#endif /* _MISPINC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h +--- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2005-12-15 15:35:08.321801750 +0100 +@@ -0,0 +1,42 @@ +/* -+ * Get all NVRAM variables (format name=value\0 ... \0\0). -+ * @param buf buffer to store variables -+ * @param count size of buffer in bytes -+ * @return 0 on success and errno on failure ++ * OS Abstraction Layer ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ + */ -+extern int nvram_getall(char *buf, int count); + -+extern int kernel_write(unsigned char *buffer, int offset, int length); ++#ifndef _osl_h_ ++#define _osl_h_ ++ ++/* osl handle type forward declaration */ ++typedef struct os_handle osl_t; + -+#endif /* _LANGUAGE_ASSEMBLY */ ++#if defined(linux) ++#include ++#elif defined(NDIS) ++#include ++#elif defined(_CFE_) ++#include ++#elif defined(_HNDRTE_) ++#include ++#elif defined(_MINOSL_) ++#include ++#elif PMON ++#include ++#elif defined(MACOSX) ++#include ++#else ++#error "Unsupported OSL requested" ++#endif + -+#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */ -+#define NVRAM_VERSION 1 -+#define NVRAM_HEADER_SIZE 20 -+#define NVRAM_LOC_GAP 0x100000 -+#define NVRAM_SPACE 0x2000 -+#define NVRAM_FIRST_LOC (0xbfd00000 - NVRAM_SPACE) -+#define NVRAM_LAST_LOC (0xc0000000 - NVRAM_SPACE) ++/* handy */ ++#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) ++#define MAXPRIO 7 /* 0-7 */ + -+#endif /* _bcmnvram_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-08-28 11:12:20.433858696 +0200 -@@ -0,0 +1,24 @@ ++#endif /* _osl_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h +--- linux.old/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h 2005-12-15 15:36:31.719013750 +0100 +@@ -0,0 +1,398 @@ +/* -+ * Misc useful routines to access NIC srom ++ * pcicfg.h: PCI configuration constants and structures. + * -+ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY @@ -8706,9398 +8229,3234 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brc + * $Id$ + */ + -+#ifndef _bcmsrom_h_ -+#define _bcmsrom_h_ -+ -+extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count); -+ -+extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); -+extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf); -+extern int srom_parsecis(uint8 *cis, char **vars, int *count); -+ -+#endif /* _bcmsrom_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h 2005-08-28 11:12:20.435858392 +0200 -@@ -0,0 +1,136 @@ -+/* -+ * Misc useful os-independent macros and functions. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _bcmutils_h_ -+#define _bcmutils_h_ ++#ifndef _h_pci_ ++#define _h_pci_ + -+#ifndef MIN -+#define MIN(a, b) (((a)<(b))?(a):(b)) ++/* The following inside ifndef's so we don't collide with NTDDK.H */ ++#ifndef PCI_MAX_BUS ++#define PCI_MAX_BUS 0x100 ++#endif ++#ifndef PCI_MAX_DEVICES ++#define PCI_MAX_DEVICES 0x20 ++#endif ++#ifndef PCI_MAX_FUNCTION ++#define PCI_MAX_FUNCTION 0x8 +#endif + -+#ifndef MAX -+#define MAX(a, b) (((a)>(b))?(a):(b)) ++#ifndef PCI_INVALID_VENDORID ++#define PCI_INVALID_VENDORID 0xffff ++#endif ++#ifndef PCI_INVALID_DEVICEID ++#define PCI_INVALID_DEVICEID 0xffff +#endif + -+#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -+#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y)) -+#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0) -+#define ISPOWEROF2(x) ((((x)-1)&(x))==0) -+#define OFFSETOF(type, member) ((uint) &((type *)0)->member) -+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) + -+/* bit map related macros */ -+#ifndef setbit -+#define NBBY 8 /* 8 bits per byte */ -+#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) -+#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -+#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) -+#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) -+#endif ++/* Convert between bus-slot-function-register and config addresses */ + -+#define NBITS(type) (sizeof (type) * 8) ++#define PCICFG_BUS_SHIFT 16 /* Bus shift */ ++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ ++#define PCICFG_FUN_SHIFT 8 /* Function shift */ ++#define PCICFG_OFF_SHIFT 0 /* Register shift */ + -+#define _BCM_U 0x01 /* upper */ -+#define _BCM_L 0x02 /* lower */ -+#define _BCM_D 0x04 /* digit */ -+#define _BCM_C 0x08 /* cntrl */ -+#define _BCM_P 0x10 /* punct */ -+#define _BCM_S 0x20 /* white space (space/lf/tab) */ -+#define _BCM_X 0x40 /* hex digit */ -+#define _BCM_SP 0x80 /* hard space (0x20) */ ++#define PCICFG_BUS_MASK 0xff /* Bus mask */ ++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ ++#define PCICFG_FUN_MASK 7 /* Function mask */ ++#define PCICFG_OFF_MASK 0xff /* Bus mask */ + -+extern unsigned char bcm_ctype[]; -+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)]) ++#define PCI_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ ++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ ++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ ++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) + -+#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0) -+#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0) -+#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0) -+#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0) -+#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0) -+#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0) -+#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0) -+#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0) -+#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0) -+#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0) -+#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0) ++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) ++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) ++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) ++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) + -+/* -+ * Spin at most 'us' microseconds while 'exp' is true. -+ * Caller should explicitly test 'exp' when this completes -+ * and take appropriate error action if 'exp' is still true. -+ */ -+#define SPINWAIT(exp, us) { \ -+ uint countdown = (us) + 9; \ -+ while ((exp) && (countdown >= 10)) {\ -+ OSL_DELAY(10); \ -+ countdown -= 10; \ -+ } \ -+} ++/* The actual config space */ + -+/* generic osl packet queue */ -+struct pktq { -+ void *head; -+ void *tail; -+ uint len; -+ uint maxlen; -+}; -+#define DEFAULT_QLEN 128 ++#define PCI_BAR_MAX 6 + -+#define pktq_len(q) ((q)->len) -+#define pktq_avail(q) ((q)->maxlen - (q)->len) -+#define pktq_head(q) ((q)->head) -+#define pktq_full(q) ((q)->len >= (q)->maxlen) ++#define PCI_ROM_BAR 8 + -+/* crc defines */ -+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++#define PCR_RSVDA_MAX 2 + -+/* tag_ID/length/value_buffer tuple */ -+typedef struct bcm_tlv { -+ uint8 id; -+ uint8 len; -+ uint8 data[1]; -+} bcm_tlv_t; ++/* pci config status reg has a bit to indicate that capability ptr is present*/ + -+/* externs */ -+extern uint bcm_atoi(char *s); -+extern uchar bcm_toupper(uchar c); -+extern ulong bcm_strtoul(char *cp, char **endp, uint base); -+extern void deadbeef(char *p, uint len); -+extern void prhex(char *msg, uchar *buf, uint len); -+extern void prpkt(char *msg, void *drv, void *p0); -+extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf); -+extern uint pkttotlen(void *drv, void *); -+extern uchar *bcm_ether_ntoa(char *ea, char *buf); -+extern int bcm_ether_atoe(char *p, char *ea); -+extern void bcm_mdelay(uint ms); -+extern char *getvar(char *vars, char *name); -+extern int getintvar(char *vars, char *name); ++#define PCI_CAPPTR_PRESENT 0x0010 + -+extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc); -+extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc); -+extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc); -+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key); -+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key); -+extern void pktqinit(struct pktq *q, int maxlen); -+extern void pktenq(struct pktq *q, void *p, bool lifo); -+extern void *pktdeq(struct pktq *q); ++typedef struct _pci_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long base[PCI_BAR_MAX]; ++ unsigned long cardbus_cis; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long baserom; ++ unsigned long rsvd_a[PCR_RSVDA_MAX]; ++ unsigned char int_line; ++ unsigned char int_pin; ++ unsigned char min_gnt; ++ unsigned char max_lat; ++ unsigned char dev_dep[192]; ++} pci_config_regs; + -+#define bcmlog(fmt, a1, a2) -+#define bcmdumplog(buf, size) *buf = '\0' ++#define SZPCR (sizeof (pci_config_regs)) ++#define MINSZPCR 64 /* offsetof (dev_dep[0] */ + -+#endif /* _bcmutils_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-08-28 11:12:20.435858392 +0200 -@@ -0,0 +1,85 @@ -+/* -+ * bit manipulation utility functions -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++/* A structure for the config registers is nice, but in most ++ * systems the config space is not memory mapped, so we need ++ * filed offsetts. :-( + */ ++#define PCI_CFG_VID 0 ++#define PCI_CFG_DID 2 ++#define PCI_CFG_CMD 4 ++#define PCI_CFG_STAT 6 ++#define PCI_CFG_REV 8 ++#define PCI_CFG_PROGIF 9 ++#define PCI_CFG_SUBCL 0xa ++#define PCI_CFG_BASECL 0xb ++#define PCI_CFG_CLSZ 0xc ++#define PCI_CFG_LATTIM 0xd ++#define PCI_CFG_HDR 0xe ++#define PCI_CFG_BIST 0xf ++#define PCI_CFG_BAR0 0x10 ++#define PCI_CFG_BAR1 0x14 ++#define PCI_CFG_BAR2 0x18 ++#define PCI_CFG_BAR3 0x1c ++#define PCI_CFG_BAR4 0x20 ++#define PCI_CFG_BAR5 0x24 ++#define PCI_CFG_CIS 0x28 ++#define PCI_CFG_SVID 0x2c ++#define PCI_CFG_SSID 0x2e ++#define PCI_CFG_ROMBAR 0x30 ++#define PCI_CFG_CAPPTR 0x34 ++#define PCI_CFG_INT 0x3c ++#define PCI_CFG_PIN 0x3d ++#define PCI_CFG_MINGNT 0x3e ++#define PCI_CFG_MAXLAT 0x3f + -+#ifndef _BITFUNCS_H -+#define _BITFUNCS_H ++/* Classes and subclasses */ + -+#include ++typedef enum { ++ PCI_CLASS_OLD = 0, ++ PCI_CLASS_DASDI, ++ PCI_CLASS_NET, ++ PCI_CLASS_DISPLAY, ++ PCI_CLASS_MMEDIA, ++ PCI_CLASS_MEMORY, ++ PCI_CLASS_BRIDGE, ++ PCI_CLASS_COMM, ++ PCI_CLASS_BASE, ++ PCI_CLASS_INPUT, ++ PCI_CLASS_DOCK, ++ PCI_CLASS_CPU, ++ PCI_CLASS_SERIAL, ++ PCI_CLASS_INTELLIGENT = 0xe, ++ PCI_CLASS_SATELLITE, ++ PCI_CLASS_CRYPT, ++ PCI_CLASS_DSP, ++ PCI_CLASS_MAX ++} pci_classes; + -+/* local prototypes */ -+static INLINE uint32 find_msbit(uint32 x); ++typedef enum { ++ PCI_DASDI_SCSI, ++ PCI_DASDI_IDE, ++ PCI_DASDI_FLOPPY, ++ PCI_DASDI_IPI, ++ PCI_DASDI_RAID, ++ PCI_DASDI_OTHER = 0x80 ++} pci_dasdi_subclasses; + ++typedef enum { ++ PCI_NET_ETHER, ++ PCI_NET_TOKEN, ++ PCI_NET_FDDI, ++ PCI_NET_ATM, ++ PCI_NET_OTHER = 0x80 ++} pci_net_subclasses; + -+/* -+ * find_msbit: returns index of most significant set bit in x, with index -+ * range defined as 0-31. NOTE: returns zero if input is zero. -+ */ ++typedef enum { ++ PCI_DISPLAY_VGA, ++ PCI_DISPLAY_XGA, ++ PCI_DISPLAY_3D, ++ PCI_DISPLAY_OTHER = 0x80 ++} pci_display_subclasses; + -+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__) ++typedef enum { ++ PCI_MMEDIA_VIDEO, ++ PCI_MMEDIA_AUDIO, ++ PCI_MMEDIA_PHONE, ++ PCI_MEDIA_OTHER = 0x80 ++} pci_mmedia_subclasses; + -+/* -+ * Implementation for Pentium processors and gcc. Note that this -+ * instruction is actually very slow on some processors (e.g., family 5, -+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic -+ * implementation instead. -+ */ -+static INLINE uint32 find_msbit(uint32 x) -+{ -+ uint msbit; -+ __asm__("bsrl %1,%0" -+ :"=r" (msbit) -+ :"r" (x)); -+ return msbit; -+} ++typedef enum { ++ PCI_MEMORY_RAM, ++ PCI_MEMORY_FLASH, ++ PCI_MEMORY_OTHER = 0x80 ++} pci_memory_subclasses; + -+#else ++typedef enum { ++ PCI_BRIDGE_HOST, ++ PCI_BRIDGE_ISA, ++ PCI_BRIDGE_EISA, ++ PCI_BRIDGE_MC, ++ PCI_BRIDGE_PCI, ++ PCI_BRIDGE_PCMCIA, ++ PCI_BRIDGE_NUBUS, ++ PCI_BRIDGE_CARDBUS, ++ PCI_BRIDGE_RACEWAY, ++ PCI_BRIDGE_OTHER = 0x80 ++} pci_bridge_subclasses; + -+/* -+ * Generic Implementation -+ */ ++typedef enum { ++ PCI_COMM_UART, ++ PCI_COMM_PARALLEL, ++ PCI_COMM_MULTIUART, ++ PCI_COMM_MODEM, ++ PCI_COMM_OTHER = 0x80 ++} pci_comm_subclasses; + -+#define DB_POW_MASK16 0xffff0000 -+#define DB_POW_MASK8 0x0000ff00 -+#define DB_POW_MASK4 0x000000f0 -+#define DB_POW_MASK2 0x0000000c -+#define DB_POW_MASK1 0x00000002 ++typedef enum { ++ PCI_BASE_PIC, ++ PCI_BASE_DMA, ++ PCI_BASE_TIMER, ++ PCI_BASE_RTC, ++ PCI_BASE_PCI_HOTPLUG, ++ PCI_BASE_OTHER = 0x80 ++} pci_base_subclasses; + -+static INLINE uint32 find_msbit(uint32 x) -+{ -+ uint32 temp_x = x; -+ uint msbit = 0; -+ if (temp_x & DB_POW_MASK16) { -+ temp_x >>= 16; -+ msbit = 16; -+ } -+ if (temp_x & DB_POW_MASK8) { -+ temp_x >>= 8; -+ msbit += 8; -+ } -+ if (temp_x & DB_POW_MASK4) { -+ temp_x >>= 4; -+ msbit += 4; -+ } -+ if (temp_x & DB_POW_MASK2) { -+ temp_x >>= 2; -+ msbit += 2; -+ } -+ if (temp_x & DB_POW_MASK1) { -+ msbit += 1; -+ } -+ return(msbit); -+} -+ -+#endif ++typedef enum { ++ PCI_INPUT_KBD, ++ PCI_INPUT_PEN, ++ PCI_INPUT_MOUSE, ++ PCI_INPUT_SCANNER, ++ PCI_INPUT_GAMEPORT, ++ PCI_INPUT_OTHER = 0x80 ++} pci_input_subclasses; + -+#endif /* _BITFUNCS_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h 2005-08-28 11:12:20.435858392 +0200 -@@ -0,0 +1,69 @@ -+/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ * -+*/ ++typedef enum { ++ PCI_DOCK_GENERIC, ++ PCI_DOCK_OTHER = 0x80 ++} pci_dock_subclasses; + -+#ifndef _epivers_h_ -+#define _epivers_h_ ++typedef enum { ++ PCI_CPU_386, ++ PCI_CPU_486, ++ PCI_CPU_PENTIUM, ++ PCI_CPU_ALPHA = 0x10, ++ PCI_CPU_POWERPC = 0x20, ++ PCI_CPU_MIPS = 0x30, ++ PCI_CPU_COPROC = 0x40, ++ PCI_CPU_OTHER = 0x80 ++} pci_cpu_subclasses; + -+#ifdef linux -+#include -+#endif ++typedef enum { ++ PCI_SERIAL_IEEE1394, ++ PCI_SERIAL_ACCESS, ++ PCI_SERIAL_SSA, ++ PCI_SERIAL_USB, ++ PCI_SERIAL_FIBER, ++ PCI_SERIAL_SMBUS, ++ PCI_SERIAL_OTHER = 0x80 ++} pci_serial_subclasses; + -+/* Vendor Name, ASCII, 32 chars max */ -+#ifdef COMPANYNAME -+#define HPNA_VENDOR COMPANYNAME -+#else -+#define HPNA_VENDOR "Broadcom Corporation" -+#endif ++typedef enum { ++ PCI_INTELLIGENT_I2O, ++} pci_intelligent_subclasses; + -+/* Driver Date, ASCII, 32 chars max */ -+#define HPNA_DRV_BUILD_DATE __DATE__ ++typedef enum { ++ PCI_SATELLITE_TV, ++ PCI_SATELLITE_AUDIO, ++ PCI_SATELLITE_VOICE, ++ PCI_SATELLITE_DATA, ++ PCI_SATELLITE_OTHER = 0x80 ++} pci_satellite_subclasses; + -+/* Hardware Manufacture Date, ASCII, 32 chars max */ -+#define HPNA_HW_MFG_DATE "Not Specified" ++typedef enum { ++ PCI_CRYPT_NETWORK, ++ PCI_CRYPT_ENTERTAINMENT, ++ PCI_CRYPT_OTHER = 0x80 ++} pci_crypt_subclasses; + -+/* See documentation for Device Type values, 32 values max */ -+#ifndef HPNA_DEV_TYPE ++typedef enum { ++ PCI_DSP_DPIO, ++ PCI_DSP_OTHER = 0x80 ++} pci_dsp_subclasses; + -+#if defined(CONFIG_BRCM_VJ) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } ++/* Header types */ ++typedef enum { ++ PCI_HEADER_NORMAL, ++ PCI_HEADER_BRIDGE, ++ PCI_HEADER_CARDBUS ++} pci_header_types; + -+#elif defined(CONFIG_BCRM_93725) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } + -+#else -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } ++/* Overlay for a PCI-to-PCI bridge */ + -+#endif ++#define PPB_RSVDA_MAX 2 ++#define PPB_RSVDD_MAX 8 + -+#endif /* !HPNA_DEV_TYPE */ ++typedef struct _ppb_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long rsvd_a[PPB_RSVDA_MAX]; ++ unsigned char prim_bus; ++ unsigned char sec_bus; ++ unsigned char sub_bus; ++ unsigned char sec_lat; ++ unsigned char io_base; ++ unsigned char io_lim; ++ unsigned short sec_status; ++ unsigned short mem_base; ++ unsigned short mem_lim; ++ unsigned short pf_mem_base; ++ unsigned short pf_mem_lim; ++ unsigned long pf_mem_base_hi; ++ unsigned long pf_mem_lim_hi; ++ unsigned short io_base_hi; ++ unsigned short io_lim_hi; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long rsvd_b; ++ unsigned char rsvd_c; ++ unsigned char int_pin; ++ unsigned short bridge_ctrl; ++ unsigned char chip_ctrl; ++ unsigned char diag_ctrl; ++ unsigned short arb_ctrl; ++ unsigned long rsvd_d[PPB_RSVDD_MAX]; ++ unsigned char dev_dep[192]; ++} ppb_config_regs; + + -+#define EPI_MAJOR_VERSION 1 ++/* PCI CAPABILITY DEFINES */ ++#define PCI_CAP_POWERMGMTCAP_ID 0x01 ++#define PCI_CAP_MSICAP_ID 0x05 ++ ++/* Data structure to define the Message Signalled Interrupt facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_msi { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short msgctrl; ++ unsigned int msgaddr; ++} pciconfig_cap_msi; ++ ++/* Data structure to define the Power managment facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_pwrmgmt { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pme_cap; ++ unsigned short pme_sts_ctrl; ++ unsigned char pme_bridge_ext; ++ unsigned char data; ++} pciconfig_cap_pwrmgmt; ++ ++/* Everything below is BRCM HND proprietary */ + -+#define EPI_MINOR_VERSION 1 ++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ ++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ ++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ ++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ ++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ ++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ ++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ ++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ ++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ ++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ ++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ ++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ + -+#define EPI_RC_NUMBER 2 ++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ ++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ + -+#define EPI_INCREMENTAL_NUMBER 0 ++/* PCI_INT_STATUS */ ++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ + -+#define EPI_BUILD_NUMBER 0 ++/* PCI_INT_MASK */ ++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ ++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ ++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ + -+#define EPI_VERSION 1,1,2,0 ++/* PCI_SPROM_CONTROL */ ++#define SPROM_BLANK 0x04 /* indicating a blank sprom */ ++#define SPROM_WRITEEN 0x10 /* sprom write enable */ ++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ + -+#define EPI_VERSION_NUM 0x01010200 ++#define SPROM_SIZE 256 /* sprom size in 16-bit */ ++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ + -+/* Driver Version String, ASCII, 32 chars max */ -+#define EPI_VERSION_STR "1.1.2.0" -+#define EPI_ROUTER_VERSION_STR "1.1.2.0" ++/* PCI_CFG_CMD_STAT */ ++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ + -+#endif /* _epivers_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in ---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-08-28 11:12:20.436858240 +0200 -@@ -0,0 +1,69 @@ -+/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * ++#endif +diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h +--- linux.old/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h 2005-12-15 12:57:27.869191250 +0100 +@@ -0,0 +1,145 @@ ++/******************************************************************************* + * $Id$ -+ * -+*/ ++ * Copyright 2001-2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. ++ ******************************************************************************/ + -+#ifndef _epivers_h_ -+#define _epivers_h_ ++#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ ++#define _NET_ETHERNET_H_ + -+#ifdef linux -+#include ++#ifndef _TYPEDEFS_H_ ++#include "typedefs.h" +#endif + -+/* Vendor Name, ASCII, 32 chars max */ -+#ifdef COMPANYNAME -+#define HPNA_VENDOR COMPANYNAME ++#if defined(__GNUC__) ++#define PACKED __attribute__((packed)) +#else -+#define HPNA_VENDOR "Broadcom Corporation" ++#define PACKED +#endif + -+/* Driver Date, ASCII, 32 chars max */ -+#define HPNA_DRV_BUILD_DATE __DATE__ -+ -+/* Hardware Manufacture Date, ASCII, 32 chars max */ -+#define HPNA_HW_MFG_DATE "Not Specified" -+ -+/* See documentation for Device Type values, 32 values max */ -+#ifndef HPNA_DEV_TYPE -+ -+#if defined(CONFIG_BRCM_VJ) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } ++/* ++ * The number of bytes in an ethernet (MAC) address. ++ */ ++#define ETHER_ADDR_LEN 6 + -+#elif defined(CONFIG_BCRM_93725) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } ++/* ++ * The number of bytes in the type field. ++ */ ++#define ETHER_TYPE_LEN 2 + -+#else -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } ++/* ++ * The number of bytes in the trailing CRC field. ++ */ ++#define ETHER_CRC_LEN 4 + -+#endif ++/* ++ * The length of the combined header. ++ */ ++#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) + -+#endif /* !HPNA_DEV_TYPE */ ++/* ++ * The minimum packet length. ++ */ ++#define ETHER_MIN_LEN 64 + ++/* ++ * The minimum packet user data length. ++ */ ++#define ETHER_MIN_DATA 46 + -+#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@ ++/* ++ * The maximum packet length. ++ */ ++#define ETHER_MAX_LEN 1518 + -+#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@ ++/* ++ * The maximum packet user data length. ++ */ ++#define ETHER_MAX_DATA 1500 + -+#define EPI_RC_NUMBER @EPI_RC_NUMBER@ ++/* ++ * Used to uniquely identify a 802.1q VLAN-tagged header. ++ */ ++#define VLAN_TAG 0x8100 + -+#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@ ++/* ++ * Located after dest & src address in ether header. ++ */ ++#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) + -+#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@ ++/* ++ * 4 bytes of vlan field info. ++ */ ++#define VLAN_FIELDS_SIZE 4 + -+#define EPI_VERSION @EPI_VERSION@ ++/* location of pri bits in 16-bit vlan fields */ ++#define VLAN_PRI_SHIFT 13 + -+#define EPI_VERSION_NUM @EPI_VERSION_NUM@ ++/* 3 bits of priority */ ++#define VLAN_PRI_MASK 7 + -+/* Driver Version String, ASCII, 32 chars max */ -+#define EPI_VERSION_STR "@EPI_VERSION_STR@" -+#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@" ++/* 802.1X ethertype */ ++#define ETHER_TYPE_802_1X 0x888e + -+#endif /* _epivers_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-08-28 11:12:20.436858240 +0200 -@@ -0,0 +1,60 @@ +/* -+ * Driver-specific socket ioctls -+ * used by BSD, Linux, and PSOS -+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * A macro to validate a length with + */ -+ -+#ifndef _etsockio_h_ -+#define _etsockio_h_ -+ -+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */ ++#define ETHER_IS_VALID_LEN(foo) \ ++ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) + + -+#if defined(linux) -+#define SIOCSETCUP (SIOCDEVPRIVATE + 0) -+#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1) -+#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2) -+#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3) -+#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4) -+#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5) -+#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */ -+#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7) -+#define SIOCTXGEN (SIOCDEVPRIVATE + 8) -+#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) -+#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) -+#define SIOCPERF (SIOCDEVPRIVATE + 11) -+#define SIOCPERFDMA (SIOCDEVPRIVATE + 12) -+ -+#else /* !linux */ -+ -+#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq) -+#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq) -+#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq) -+#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq) -+#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq) -+#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq) -+#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */ -+#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq) -+#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq) ++#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ ++/* ++ * Structure of a 10Mb/s Ethernet header. ++ */ ++struct ether_header { ++ uint8 ether_dhost[ETHER_ADDR_LEN]; ++ uint8 ether_shost[ETHER_ADDR_LEN]; ++ uint16 ether_type; ++} PACKED ; + ++/* ++ * Structure of a 48-bit Ethernet address. ++ */ ++struct ether_addr { ++ uint8 octet[ETHER_ADDR_LEN]; ++} PACKED ; +#endif + -+/* arg to SIOCTXGEN */ -+struct txg { -+ uint32 num; /* number of frames to send */ -+ uint32 delay; /* delay in microseconds between sending each */ -+ uint32 size; /* size of ether frame to send */ -+ uchar buf[1514]; /* starting ether frame data */ -+}; ++/* ++ * Takes a pointer, returns true if a 48-bit multicast address ++ * (including broadcast, since it is all ones) ++ */ ++#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) + -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h 2005-08-28 11:12:20.437858088 +0200 -@@ -0,0 +1,184 @@ +/* -+ * flash.h: Common definitions for flash access. ++ * Takes a pointer, returns true if a 48-bit broadcast (all ones) ++ */ ++#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ ++ ((uint8 *)(ea))[1] & \ ++ ((uint8 *)(ea))[2] & \ ++ ((uint8 *)(ea))[3] & \ ++ ((uint8 *)(ea))[4] & \ ++ ((uint8 *)(ea))[5]) == 0xff) ++ ++static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; ++ ++/* ++ * Takes a pointer, returns true if a 48-bit null address (all zeros) ++ */ ++#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ ++ ((uint8 *)(ea))[1] | \ ++ ((uint8 *)(ea))[2] | \ ++ ((uint8 *)(ea))[3] | \ ++ ((uint8 *)(ea))[4] | \ ++ ((uint8 *)(ea))[5]) == 0) ++ ++#undef PACKED ++ ++#endif /* _NET_ETHERNET_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/s5.h linux.dev/arch/mips/bcm947xx/include/s5.h +--- linux.old/arch/mips/bcm947xx/include/s5.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/s5.h 2005-12-15 12:57:27.869191250 +0100 +@@ -0,0 +1,103 @@ ++#ifndef _S5_H_ ++#define _S5_H_ ++/* ++ * Copyright 2003, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core ++ * and MIPS3301 (R4K) System Address Space + * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation, located in the file ++ * LICENSE. + * -+ * $Id$ ++ * $Id: s5.h,v 1.3 2003/06/10 18:54:51 jfd Exp $ ++ * + */ + -+/* Types of flashes we know about */ -+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t; -+ -+/* Commands to write/erase the flases */ -+typedef struct _flash_cmds{ -+ flash_type_t type; -+ bool need_unlock; -+ uint16 pre_erase; -+ uint16 erase_block; -+ uint16 erase_chip; -+ uint16 write_word; -+ uint16 write_buf; -+ uint16 clear_csr; -+ uint16 read_csr; -+ uint16 read_id; -+ uint16 confirm; -+ uint16 read_array; -+} flash_cmds_t; ++/* BCM5365 Address map */ ++#define KSEG1ADDR(x) ( (x) | 0xa0000000) ++#define BCM5365_SDRAM 0x00000000 /* 0-128MB Physical SDRAM */ ++#define BCM5365_PCI_MEM 0x08000000 /* Host Mode PCI mem space (64MB) */ ++#define BCM5365_PCI_CFG 0x0c000000 /* Host Mode PCI cfg space (64MB) */ ++#define BCM5365_PCI_DMA 0x40000000 /* Client Mode PCI mem space (1GB)*/ ++#define BCM5365_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define BCM5365_ENUM 0x18000000 /* Beginning of core enum space */ + -+#define UNLOCK_CMD_WORDS 2 ++/* BCM5365 Core register space */ ++#define BCM5365_REG_CHIPC 0x18000000 /* Chipcommon registers */ ++#define BCM5365_REG_EMAC0 0x18001000 /* Ethernet MAC0 core registers */ ++#define BCM5365_REG_IPSEC 0x18002000 /* BCM582x CryptoCore registers */ ++#define BCM5365_REG_USB 0x18003000 /* USB core registers */ ++#define BCM5365_REG_PCI 0x18004000 /* PCI core registers */ ++#define BCM5365_REG_MIPS33 0x18005000 /* MIPS core registers */ ++#define BCM5365_REG_MEMC 0x18006000 /* MEMC core registers */ ++#define BCM5365_REG_UARTS (BCM5365_REG_CHIPC + 0x300) /* UART regs */ ++#define BCM5365_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + -+typedef struct _unlock_cmd { -+ uint addr[UNLOCK_CMD_WORDS]; -+ uint16 cmd[UNLOCK_CMD_WORDS]; -+} unlock_cmd_t; ++/* COM Ports 1/2 */ ++#define BCM5365_UART (BCM5365_REG_UARTS) ++#define BCM5365_UART_COM2 (BCM5365_REG_UARTS + 0x00000100) + -+/* Flash descriptors */ -+typedef struct _flash_desc { -+ uint16 mfgid; /* Manufacturer Id */ -+ uint16 devid; /* Device Id */ -+ uint size; /* Total size in bytes */ -+ uint width; /* Device width in bytes */ -+ flash_type_t type; /* Device type old, S, J */ -+ uint bsize; /* Block size */ -+ uint nb; /* Number of blocks */ -+ uint ff; /* First full block */ -+ uint lf; /* Last full block */ -+ uint nsub; /* Number of subblocks */ -+ uint *subblocks; /* Offsets for subblocks */ -+ char *desc; /* Description */ -+} flash_desc_t; ++/* Registers common to MIPS33 Core used in 5365 */ ++#define MIPS33_FLASH_REGION 0x1fc00000 /* Boot FLASH Region */ ++#define MIPS33_EXTIF_REGION 0x1a000000 /* Chipcommon EXTIF region*/ ++#define BCM5365_EXTIF 0x1b000000 /* MISC_CS */ ++#define MIPS33_FLASH_REGION_AUX 0x1c000000 /* FLASH Region 2*/ + ++/* Internal Core Sonics Backplane Devices */ ++#define INTERNAL_UART_COM1 BCM5365_UART ++#define INTERNAL_UART_COM2 BCM5365_UART_COM2 ++#define SB_REG_CHIPC BCM5365_REG_CHIPC ++#define SB_REG_ENET0 BCM5365_REG_EMAC0 ++#define SB_REG_IPSEC BCM5365_REG_IPSEC ++#define SB_REG_USB BCM5365_REG_USB ++#define SB_REG_PCI BCM5365_REG_PCI ++#define SB_REG_MIPS BCM5365_REG_MIPS33 ++#define SB_REG_MEMC BCM5365_REG_MEMC ++#define SB_REG_MEMC_OFF 0x6000 ++#define SB_EXTIF_SPACE MIPS33_EXTIF_REGION ++#define SB_FLASH_SPACE MIPS33_FLASH_REGION + -+#ifdef DECLARE_FLASHES ++/* ++ * XXX ++ * 5365-specific backplane interrupt flag numbers. This should be done ++ * dynamically instead. ++ */ ++#define SBFLAG_PCI 0 ++#define SBFLAG_ENET0 1 ++#define SBFLAG_ILINE20 2 ++#define SBFLAG_CODEC 3 ++#define SBFLAG_USB 4 ++#define SBFLAG_EXTIF 5 ++#define SBFLAG_ENET1 6 + -+flash_cmds_t flash_cmds[] = { -+/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ -+ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, -+ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, -+ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, -+ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, -+ { 0 } -+}; ++/* BCM95365 Local Bus devices */ ++#define BCM95365K_RESET_ADDR BCM5365_EXTIF ++#define BCM95365K_BOARDID_ADDR (BCM5365_EXTIF | 0x4000) ++#define BCM95365K_DOC_ADDR (BCM5365_EXTIF | 0x6000) ++#define BCM95365K_LED_ADDR (BCM5365_EXTIF | 0xc000) ++#define BCM95365K_TOD_REG_BASE (BCM95365K_NVRAM_ADDR | 0x1ff0) ++#define BCM95365K_NVRAM_ADDR (BCM5365_EXTIF | 0xe000) ++#define BCM95365K_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ + -+unlock_cmd_t unlock_cmd_amd = { -+#ifdef MIPSEB -+/* addr: */ { 0x0aa8, 0x0556}, -+#else -+/* addr: */ { 0x0aaa, 0x0554}, -+#endif -+/* data: */ { 0xaa, 0x55} -+}; ++/* Write to DLR2416 VFD Display character RAM */ ++#define LED_REG(x) \ ++ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x))) + -+unlock_cmd_t unlock_cmd_sst = { -+#ifdef MIPSEB -+/* addr: */ { 0xaaa8, 0x5556}, ++#ifdef CONFIG_VSIM ++#define BCM5365_TRACE(trval) do { *((int *)0xa0002ff8) = (trval); \ ++ } while (0) +#else -+/* addr: */ { 0xaaaa, 0x5554}, ++#define BCM5365_TRACE(trval) do { *((unsigned char *)\ ++ KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \ ++ *((int *)0xa0002ff8) = (trval); } while (0) +#endif -+/* data: */ { 0xaa, 0x55} -+}; -+ -+#define AMD_CMD 0xaaa -+#define SST_CMD 0xaaaa + -+/* intel unlock block cmds */ -+#define INTEL_UNLOCK1 0x60 -+#define INTEL_UNLOCK2 0xD0 ++/* BCM9536R Local Bus devices */ ++#define BCM95365R_DOC_ADDR BCM5365_EXTIF + -+/* Just eight blocks of 8KB byte each */ + -+uint blk8x8k[] = { 0x00000000, -+ 0x00002000, -+ 0x00004000, -+ 0x00006000, -+ 0x00008000, -+ 0x0000a000, -+ 0x0000c000, -+ 0x0000e000, -+ 0x00010000 -+}; + -+/* Funky AMD arrangement for 29xx800's */ -+uint amd800[] = { 0x00000000, /* 16KB */ -+ 0x00004000, /* 32KB */ -+ 0x0000c000, /* 8KB */ -+ 0x0000e000, /* 8KB */ -+ 0x00010000, /* 8KB */ -+ 0x00012000, /* 8KB */ -+ 0x00014000, /* 32KB */ -+ 0x0001c000, /* 16KB */ -+ 0x00020000 -+}; ++#endif /*!_S5_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h +--- linux.old/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h 2005-12-15 15:35:20.458560250 +0100 +@@ -0,0 +1,440 @@ ++/* ++ * SiliconBackplane Chipcommon core hardware definitions. ++ * ++ * The chipcommon core provides chip identification, SB control, ++ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, ++ * gpio interface, extbus, and support for serial and parallel flashes. ++ * ++ * $Id$ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ */ + -+/* AMD arrangement for 29xx160's */ -+uint amd4112[] = { 0x00000000, /* 32KB */ -+ 0x00008000, /* 8KB */ -+ 0x0000a000, /* 8KB */ -+ 0x0000c000, /* 16KB */ -+ 0x00010000 -+}; -+uint amd2114[] = { 0x00000000, /* 16KB */ -+ 0x00004000, /* 8KB */ -+ 0x00006000, /* 8KB */ -+ 0x00008000, /* 32KB */ -+ 0x00010000 -+}; ++#ifndef _SBCHIPC_H ++#define _SBCHIPC_H + + ++#ifndef _LANGUAGE_ASSEMBLY + -+flash_desc_t flashes[] = { -+ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" }, -+ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" }, -+ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" }, -+ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" }, -+ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" }, -+ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" }, -+ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" }, -+ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" }, -+ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" }, -+ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" }, -+ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" }, -+ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" }, -+ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" }, -+ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" }, -+ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" }, -+ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" }, -+ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" }, -+ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" }, -+ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" }, -+ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" }, -+ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" }, -+ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" }, -+ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" }, -+ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" }, -+ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" }, -+ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" }, -+ { 0x0001, 0x2201, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, -+ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" }, -+ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" }, -+ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" }, -+ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, -+ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, -+ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" }, -+ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" }, -+ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" }, -+ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" }, -+ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, -+ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, -+ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" }, -+ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL }, -+}; ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ + -+#else ++typedef volatile struct { ++ uint32 chipid; /* 0x0 */ ++ uint32 capabilities; ++ uint32 corecontrol; /* corerev >= 1 */ ++ uint32 bist; + -+extern flash_cmds_t flash_cmds[]; -+extern unlock_cmd_t unlock_cmd; -+extern flash_desc_t flashes[]; ++ /* OTP */ ++ uint32 otpstatus; /* 0x10, corerev >= 10 */ ++ uint32 otpcontrol; ++ uint32 otpprog; ++ uint32 PAD; + -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-08-28 11:12:20.437858088 +0200 -@@ -0,0 +1,34 @@ -+/* -+ * BCM47XX FLASH driver interface -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ ++ /* Interrupt control */ ++ uint32 intstatus; /* 0x20 */ ++ uint32 intmask; ++ uint32 chipcontrol; /* 0x28, rev >= 11 */ ++ uint32 chipstatus; /* 0x2c, rev >= 11 */ + -+#ifndef _flashutl_h_ -+#define _flashutl_h_ ++ /* Jtag Master */ ++ uint32 jtagcmd; /* 0x30, rev >= 10 */ ++ uint32 jtagir; ++ uint32 jtagdr; ++ uint32 jtagctrl; + -+#define FLASH_BASE 0xbfc00000 /* BCM4710 */ ++ /* serial flash interface registers */ ++ uint32 flashcontrol; /* 0x40 */ ++ uint32 flashaddress; ++ uint32 flashdata; ++ uint32 PAD[1]; + -+int flash_init(void* base_addr, char *flash_str); -+int flash_erase(void); -+int flash_eraseblk(unsigned long off); -+int flash_write(unsigned long off, uint16 *src, uint nbytes); -+unsigned long flash_block_base(unsigned long off); -+unsigned long flash_block_lim(unsigned long off); -+int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes); ++ /* Silicon backplane configuration broadcast control */ ++ uint32 broadcastaddress; /* 0x50 */ ++ uint32 broadcastdata; ++ uint32 PAD[2]; + -+void nvWrite(unsigned short *data, unsigned int len); ++ /* gpio - cleared only by power-on-reset */ ++ uint32 gpioin; /* 0x60 */ ++ uint32 gpioout; ++ uint32 gpioouten; ++ uint32 gpiocontrol; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[2]; + -+/* Global vars */ -+extern char* flashutl_base; -+extern flash_desc_t* flashutl_desc; -+extern flash_cmds_t* flashutl_cmd; ++ /* Watchdog timer */ ++ uint32 watchdog; /* 0x80 */ ++ uint32 PAD[1]; + -+#endif /* _flashutl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-08-28 11:12:20.438857936 +0200 -@@ -0,0 +1,181 @@ -+/* -+ * Generic Broadcom Home Networking Division (HND) DMA engine definitions. -+ * This supports the following chips: BCM42xx, 44xx, 47xx . -+ * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ ++ /*GPIO based LED powersave registers corerev >= 16*/ ++ uint32 gpiotimerval; /*0x88 */ ++ uint32 gpiotimeroutmask; + -+#ifndef _hnddma_h_ -+#define _hnddma_h_ ++ /* clock control */ ++ uint32 clockcontrol_n; /* 0x90 */ ++ uint32 clockcontrol_sb; /* aka m0 */ ++ uint32 clockcontrol_pci; /* aka m1 */ ++ uint32 clockcontrol_m2; /* mii/uart/mipsref */ ++ uint32 clockcontrol_mips; /* aka m3 */ ++ uint32 clkdiv; /* corerev >= 3 */ ++ uint32 PAD[2]; + -+/* -+ * Each DMA processor consists of a transmit channel and a receive channel. -+ */ -+typedef volatile struct { -+ /* transmit channel */ -+ uint32 xmtcontrol; /* enable, et al */ -+ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */ -+ uint32 xmtptr; /* last descriptor posted to chip */ -+ uint32 xmtstatus; /* current active descriptor, et al */ -+ -+ /* receive channel */ -+ uint32 rcvcontrol; /* enable, et al */ -+ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */ -+ uint32 rcvptr; /* last descriptor posted to chip */ -+ uint32 rcvstatus; /* current active descriptor, et al */ -+} dmaregs_t; ++ /* pll delay registers (corerev >= 4) */ ++ uint32 pll_on_delay; /* 0xb0 */ ++ uint32 fref_sel_delay; ++ uint32 slow_clk_ctl; /* 5 < corerev < 10 */ ++ uint32 PAD[1]; + -+typedef volatile struct { -+ /* diag access */ -+ uint32 fifoaddr; /* diag address */ -+ uint32 fifodatalow; /* low 32bits of data */ -+ uint32 fifodatahigh; /* high 32bits of data */ -+ uint32 pad; /* reserved */ -+} dmafifo_t; -+ -+/* transmit channel control */ -+#define XC_XE ((uint32)1 << 0) /* transmit enable */ -+#define XC_SE ((uint32)1 << 1) /* transmit suspend request */ -+#define XC_LE ((uint32)1 << 2) /* loopback enable */ -+#define XC_FL ((uint32)1 << 4) /* flush request */ -+ -+/* transmit descriptor table pointer */ -+#define XP_LD_MASK 0xfff /* last valid descriptor */ -+ -+/* transmit channel status */ -+#define XS_CD_MASK 0x0fff /* current descriptor pointer */ -+#define XS_XS_MASK 0xf000 /* transmit state */ -+#define XS_XS_SHIFT 12 -+#define XS_XS_DISABLED 0x0000 /* disabled */ -+#define XS_XS_ACTIVE 0x1000 /* active */ -+#define XS_XS_IDLE 0x2000 /* idle wait */ -+#define XS_XS_STOPPED 0x3000 /* stopped */ -+#define XS_XS_SUSP 0x4000 /* suspend pending */ -+#define XS_XE_MASK 0xf0000 /* transmit errors */ -+#define XS_XE_SHIFT 16 -+#define XS_XE_NOERR 0x00000 /* no error */ -+#define XS_XE_DPE 0x10000 /* descriptor protocol error */ -+#define XS_XE_DFU 0x20000 /* data fifo underrun */ -+#define XS_XE_BEBR 0x30000 /* bus error on buffer read */ -+#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */ -+#define XS_FL ((uint32)1 << 20) /* flushed */ -+ -+/* receive channel control */ -+#define RC_RE ((uint32)1 << 0) /* receive enable */ -+#define RC_RO_MASK 0xfe /* receive frame offset */ -+#define RC_RO_SHIFT 1 -+#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */ -+ -+/* receive descriptor table pointer */ -+#define RP_LD_MASK 0xfff /* last valid descriptor */ -+ -+/* receive channel status */ -+#define RS_CD_MASK 0x0fff /* current descriptor pointer */ -+#define RS_RS_MASK 0xf000 /* receive state */ -+#define RS_RS_SHIFT 12 -+#define RS_RS_DISABLED 0x0000 /* disabled */ -+#define RS_RS_ACTIVE 0x1000 /* active */ -+#define RS_RS_IDLE 0x2000 /* idle wait */ -+#define RS_RS_STOPPED 0x3000 /* reserved */ -+#define RS_RE_MASK 0xf0000 /* receive errors */ -+#define RS_RE_SHIFT 16 -+#define RS_RE_NOERR 0x00000 /* no error */ -+#define RS_RE_DPE 0x10000 /* descriptor protocol error */ -+#define RS_RE_DFO 0x20000 /* data fifo overflow */ -+#define RS_RE_BEBW 0x30000 /* bus error on buffer write */ -+#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */ -+ -+/* fifoaddr */ -+#define FA_OFF_MASK 0xffff /* offset */ -+#define FA_SEL_MASK 0xf0000 /* select */ -+#define FA_SEL_SHIFT 16 -+#define FA_SEL_XDD 0x00000 /* transmit dma data */ -+#define FA_SEL_XDP 0x10000 /* transmit dma pointers */ -+#define FA_SEL_RDD 0x40000 /* receive dma data */ -+#define FA_SEL_RDP 0x50000 /* receive dma pointers */ -+#define FA_SEL_XFD 0x80000 /* transmit fifo data */ -+#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */ -+#define FA_SEL_RFD 0xc0000 /* receive fifo data */ -+#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */ ++ /* Instaclock registers (corerev >= 10) */ ++ uint32 system_clk_ctl; /* 0xc0 */ ++ uint32 clkstatestretch; ++ uint32 PAD[14]; + -+/* -+ * DMA Descriptor -+ * Descriptors are only read by the hardware, never written back. -+ */ -+typedef volatile struct { -+ uint32 ctrl; /* misc control bits & bufcount */ -+ uint32 addr; /* data buffer address */ -+} dmadd_t; ++ /* ExtBus control registers (corerev >= 3) */ ++ uint32 pcmcia_config; /* 0x100 */ ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; ++ uint32 ide_config; ++ uint32 ide_memwait; ++ uint32 ide_attrwait; ++ uint32 ide_iowait; ++ uint32 prog_config; ++ uint32 prog_waitcount; ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[116]; + -+/* -+ * Each descriptor ring must be 4096byte aligned -+ * and fit within a single 4096byte page. -+ */ -+#define DMAMAXRINGSZ 4096 -+#define DMARINGALIGN 4096 ++ /* uarts */ ++ uint8 uart0data; /* 0x300 */ ++ uint8 uart0imr; ++ uint8 uart0fcr; ++ uint8 uart0lcr; ++ uint8 uart0mcr; ++ uint8 uart0lsr; ++ uint8 uart0msr; ++ uint8 uart0scratch; ++ uint8 PAD[248]; /* corerev >= 1 */ + -+/* control flags */ -+#define CTRL_BC_MASK 0x1fff /* buffer byte count */ -+#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */ -+#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */ -+#define CTRL_EOF ((uint32)1 << 30) /* end of frame */ -+#define CTRL_SOF ((uint32)1 << 31) /* start of frame */ ++ uint8 uart1data; /* 0x400 */ ++ uint8 uart1imr; ++ uint8 uart1fcr; ++ uint8 uart1lcr; ++ uint8 uart1mcr; ++ uint8 uart1lsr; ++ uint8 uart1msr; ++ uint8 uart1scratch; ++} chipcregs_t; + -+/* control flags in the range [27:20] are core-specific and not defined here */ -+#define CTRL_CORE_MASK 0x0ff00000 ++#endif /* _LANGUAGE_ASSEMBLY */ + -+/* export structure */ -+typedef volatile struct { -+ /* rx error counters */ -+ uint rxgiants; /* rx giant frames */ -+ uint rxnobuf; /* rx out of dma descriptors */ -+ /* tx error counters */ -+ uint txnobuf; /* tx out of dma descriptors */ -+} hnddma_t; -+ -+#ifndef di_t -+#define di_t void -+#endif ++#define CC_CHIPID 0 ++#define CC_CAPABILITIES 4 ++#define CC_JTAGCMD 0x30 ++#define CC_JTAGIR 0x34 ++#define CC_JTAGDR 0x38 ++#define CC_JTAGCTRL 0x3c ++#define CC_WATCHDOG 0x80 ++#define CC_CLKC_N 0x90 ++#define CC_CLKC_M0 0x94 ++#define CC_CLKC_M1 0x98 ++#define CC_CLKC_M2 0x9c ++#define CC_CLKC_M3 0xa0 ++#define CC_CLKDIV 0xa4 ++#define CC_SYS_CLK_CTL 0xc0 ++#define CC_OTP 0x800 + -+/* externs */ -+extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs, -+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, -+ uint ddoffset, uint dataoffset, uint *msg_level); -+extern void dma_detach(di_t *di); -+extern void dma_txreset(di_t *di); -+extern void dma_rxreset(di_t *di); -+extern void dma_txinit(di_t *di); -+extern bool dma_txenabled(di_t *di); -+extern void dma_rxinit(di_t *di); -+extern void dma_rxenable(di_t *di); -+extern bool dma_rxenabled(di_t *di); -+extern void dma_txsuspend(di_t *di); -+extern void dma_txresume(di_t *di); -+extern bool dma_txsuspended(di_t *di); -+extern bool dma_txstopped(di_t *di); -+extern bool dma_rxstopped(di_t *di); -+extern int dma_txfast(di_t *di, void *p, uint32 coreflags); -+extern int dma_tx(di_t *di, void *p, uint32 coreflags); -+extern void dma_fifoloopbackenable(di_t *di); -+extern void *dma_rx(di_t *di); -+extern void dma_rxfill(di_t *di); -+extern void dma_txreclaim(di_t *di, bool forceall); -+extern void dma_rxreclaim(di_t *di); -+extern char *dma_dump(di_t *di, char *buf); -+extern char *dma_dumptx(di_t *di, char *buf); -+extern char *dma_dumprx(di_t *di, char *buf); -+extern uint dma_getvar(di_t *di, char *name); -+extern void *dma_getnexttxp(di_t *di, bool forceall); -+extern void *dma_getnextrxp(di_t *di, bool forceall); -+extern void dma_txblock(di_t *di); -+extern void dma_txunblock(di_t *di); -+extern uint dma_txactive(di_t *di); -+ -+#endif /* _hnddma_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-08-28 11:12:20.439857784 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * Alternate include file for HND sbmips.h since CFE also ships with -+ * a sbmips.h. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++/* chipid */ ++#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ ++#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ ++#define CID_REV_SHIFT 16 /* Chip Revision shift */ ++#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ ++#define CID_PKG_SHIFT 20 /* Package Option shift */ ++#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ ++#define CID_CC_SHIFT 24 + -+#include "sbmips.h" -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-08-28 11:12:20.440857632 +0200 -@@ -0,0 +1,313 @@ -+/* -+ * Linux OS Independent Layer -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++/* capabilities */ ++#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ ++#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ ++#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ ++#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ ++#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ ++#define CAP_EXTBUS 0x00000040 /* External bus present */ ++#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ ++#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ ++#define CAP_PWR_CTL 0x00040000 /* Power control */ ++#define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ ++#define CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ ++#define CAP_OTPSIZE_BASE 5 /* OTP Size base */ ++#define CAP_JTAGP 0x00400000 /* JTAG Master Present */ ++#define CAP_ROM 0x00800000 /* Internal boot rom active */ + -+#ifndef _linux_osl_h_ -+#define _linux_osl_h_ ++/* PLL type */ ++#define PLL_NONE 0x00000000 ++#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ ++#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ ++#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ ++#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */ ++#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ ++#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */ + -+#include ++/* corecontrol */ ++#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ ++#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ + -+/* use current 2.4.x calling conventions */ -+#include ++/* Fields in the otpstatus register */ ++#define OTPS_PROGFAIL 0x80000000 ++#define OTPS_PROTECT 0x00000007 ++#define OTPS_HW_PROTECT 0x00000001 ++#define OTPS_SW_PROTECT 0x00000002 ++#define OTPS_CID_PROTECT 0x00000004 ++ ++/* Fields in the otpcontrol register */ ++#define OTPC_RECWAIT 0xff000000 ++#define OTPC_PROGWAIT 0x00ffff00 ++#define OTPC_PRW_SHIFT 8 ++#define OTPC_MAXFAIL 0x00000038 ++#define OTPC_VSEL 0x00000006 ++#define OTPC_SELVL 0x00000001 ++ ++/* Fields in otpprog */ ++#define OTPP_COL_MASK 0x000000ff ++#define OTPP_ROW_MASK 0x0000ff00 ++#define OTPP_ROW_SHIFT 8 ++#define OTPP_READERR 0x10000000 ++#define OTPP_VALUE 0x20000000 ++#define OTPP_VALUE_SHIFT 29 ++#define OTPP_READ 0x40000000 ++#define OTPP_START 0x80000000 ++#define OTPP_BUSY 0x80000000 ++ ++/* jtagcmd */ ++#define JCMD_START 0x80000000 ++#define JCMD_BUSY 0x80000000 ++#define JCMD_PAUSE 0x40000000 ++#define JCMD0_ACC_MASK 0x0000f000 ++#define JCMD0_ACC_IRDR 0x00000000 ++#define JCMD0_ACC_DR 0x00001000 ++#define JCMD0_ACC_IR 0x00002000 ++#define JCMD0_ACC_RESET 0x00003000 ++#define JCMD0_ACC_IRPDR 0x00004000 ++#define JCMD0_ACC_PDR 0x00005000 ++#define JCMD0_IRW_MASK 0x00000f00 ++#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ ++#define JCMD_ACC_IRDR 0x00000000 ++#define JCMD_ACC_DR 0x00010000 ++#define JCMD_ACC_IR 0x00020000 ++#define JCMD_ACC_RESET 0x00030000 ++#define JCMD_ACC_IRPDR 0x00040000 ++#define JCMD_ACC_PDR 0x00050000 ++#define JCMD_IRW_MASK 0x00001f00 ++#define JCMD_IRW_SHIFT 8 ++#define JCMD_DRW_MASK 0x0000003f ++ ++/* jtagctrl */ ++#define JCTRL_FORCE_CLK 4 /* Force clock */ ++#define JCTRL_EXT_EN 2 /* Enable external targets */ ++#define JCTRL_EN 1 /* Enable Jtag master */ ++ ++/* Fields in clkdiv */ ++#define CLKD_SFLASH 0x0f000000 ++#define CLKD_SFLASH_SHIFT 24 ++#define CLKD_OTP 0x000f0000 ++#define CLKD_OTP_SHIFT 16 ++#define CLKD_JTAG 0x00000f00 ++#define CLKD_JTAG_SHIFT 8 ++#define CLKD_UART 0x000000ff + -+/* assert and panic */ -+#define ASSERT(exp) do {} while (0) ++/* intstatus/intmask */ ++#define CI_GPIO 0x00000001 /* gpio intr */ ++#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ ++#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ + -+/* PCMCIA attribute space access macros */ -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_read_attr((osh), (offset), (buf), (size)) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_write_attr((osh), (offset), (buf), (size)) -+extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size); -+extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size); ++/* slow_clk_ctl */ ++#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ ++#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ ++#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ ++#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ ++#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ ++#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ ++#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ ++#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ ++#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ ++#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ ++#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ ++#define SCC_CD_SHIFT 16 + -+/* PCI configuration space access macros */ -+#define OSL_PCI_READ_CONFIG(loc, offset, size) \ -+ osl_pci_read_config((loc), (offset), (size)) -+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \ -+ osl_pci_write_config((loc), (offset), (size), (val)) -+extern uint32 osl_pci_read_config(void *loc, uint size, uint offset); -+extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val); ++/* system_clk_ctl */ ++#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ ++#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ ++#define SYCC_FP 0x00000004 /* ForcePLLOn */ ++#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ ++#define SYCC_HR 0x00000010 /* Force HT */ ++#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4+divisor)) */ ++#define SYCC_CD_SHIFT 16 + -+/* OSL initialization */ -+#define osl_init() do {} while (0) ++/* gpiotimerval*/ ++#define GPIO_ONTIME_SHIFT 16 + -+/* host/bus architecture-specific byte swap */ -+#define BUS_SWAP32(v) (v) ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 ++#define CN_PLLC_MASK 0xf0000 /* pll control */ ++#define CN_PLLC_SHIFT 16 + -+/* -+ * BINOSL selects the slightly slower function-call-based binary compatible osl. -+ * Macros expand to calls to functions defined in linux_osl.c . -+ */ -+#ifndef BINOSL ++/* clockcontrol_sb/pci/uart */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 + -+/* string library, kernel mode */ -+#define printf(fmt, args...) printk(fmt, ## args) -+#include -+#include ++/* N3M Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 + -+/* register access macros */ -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = readb((volatile uint8*)(r)); break; \ -+ case sizeof(uint16): __osl_v = readw((volatile uint16*)(r)); break; \ -+ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ + -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 + -+/* bcopy, bcmp, and bzero */ -+#define bcopy(src, dst, len) memcpy((dst), (src), (len)) -+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) -+#define bzero(b, len) memset((b), '\0', (len)) ++/* Type 2 Clock control magic field values */ ++#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ ++#define CC_T2M2_BIAS 3 /* m2 bias */ + -+/* general purpose memory allocation */ -+#define MALLOC(size) kmalloc((size), GFP_ATOMIC) -+#define MFREE(addr, size) kfree((addr)) ++#define CC_T2MC_M1BYP 1 ++#define CC_T2MC_M2BYP 2 ++#define CC_T2MC_M3BYP 4 + -+/* uncached virtual address */ -+#ifdef mips -+#define OSL_UNCACHED(va) KSEG1ADDR((va)) -+#include -+#else -+#define OSL_UNCACHED(va) (va) -+#endif ++/* Type 6 Clock control magic field values */ ++#define CC_T6_MMASK 1 /* bits of interest in m */ ++#define CC_T6_M0 120000000 /* sb clock for m = 0 */ ++#define CC_T6_M1 100000000 /* sb clock for m = 1 */ ++#define SB2MIPS_T6(sb) (2 * (sb)) + -+/* get processor cycle count */ -+#if defined(mips) -+#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) -+#elif defined(__i386__) -+#define OSL_GETCYCLES(x) rdtscl((x)) -+#else -+#define OSL_GETCYCLES(x) ((x) = 0) -+#endif ++/* Common clock base */ ++#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ ++#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */ + -+/* dereference an address that may cause a bus exception */ -+#ifdef mips -+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) -+#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") -+#else -+#define BUSPROBE(val, addr) get_dbe((val), (addr)) -+#include -+#endif -+#else -+#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) -+#endif ++/* Clock control values for 200Mhz in 5350 */ ++#define CLKC_5350_N 0x0311 ++#define CLKC_5350_M 0x04020009 + -+/* map/unmap physical to virtual I/O */ -+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) -+#define REG_UNMAP(va) iounmap((void *)(va)) ++/* Flash types in the chipcommon capabilities register */ ++#define FLASH_NONE 0x000 /* No flash */ ++#define SFLASH_ST 0x100 /* ST serial flash */ ++#define SFLASH_AT 0x200 /* Atmel serial flash */ ++#define PFLASH 0x700 /* Parallel flash */ + -+/* allocate/free shared (dma-able) consistent (uncached) memory */ -+#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ -+ pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap)) -+#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ -+ pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa)) ++/* Bits in the config registers */ ++#define CC_CFG_EN 0x0001 /* Enable */ ++#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ ++#define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */ ++#define CC_CFG_EM_SYNC 0x0004 /* Synchronous */ ++#define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */ ++#define CC_CFG_EM_IDE 0x000a /* IDE */ ++#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ ++#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ ++#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ ++#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ + -+/* map/unmap direction */ -+#define DMA_TX PCI_DMA_TODEVICE -+#define DMA_RX PCI_DMA_FROMDEVICE ++/* Start/busy bit in flashcontrol */ ++#define SFLASH_START 0x80000000 ++#define SFLASH_BUSY SFLASH_START + -+/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(dev, va, size, direction, p) \ -+ pci_map_single((dev), (va), (size), (direction)) -+#define DMA_UNMAP(dev, pa, size, direction, p) \ -+ pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction)) ++/* flashcontrol opcodes for ST flashes */ ++#define SFLASH_ST_WREN 0x0006 /* Write Enable */ ++#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ ++#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ ++#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ ++#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ ++#define SFLASH_ST_PP 0x0302 /* Page Program */ ++#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ ++#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ ++#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ ++#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ + -+/* microsecond delay */ -+#define OSL_DELAY(usec) udelay(usec) -+#include -+#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \ -+ schedule_timeout((usec*HZ)/1000000); -+#define OSL_IN_INTERRUPT() in_interrupt() ++/* Status register bits for ST flashes */ ++#define SFLASH_ST_WIP 0x01 /* Write In Progress */ ++#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ ++#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ ++#define SFLASH_ST_BP_SHIFT 2 ++#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ + -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) memset((r), '\0', (len)) ++/* flashcontrol opcodes for Atmel flashes */ ++#define SFLASH_AT_READ 0x07e8 ++#define SFLASH_AT_PAGE_READ 0x07d2 ++#define SFLASH_AT_BUF1_READ ++#define SFLASH_AT_BUF2_READ ++#define SFLASH_AT_STATUS 0x01d7 ++#define SFLASH_AT_BUF1_WRITE 0x0384 ++#define SFLASH_AT_BUF2_WRITE 0x0387 ++#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 ++#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 ++#define SFLASH_AT_BUF1_PROGRAM 0x0288 ++#define SFLASH_AT_BUF2_PROGRAM 0x0289 ++#define SFLASH_AT_PAGE_ERASE 0x0281 ++#define SFLASH_AT_BLOCK_ERASE 0x0250 ++#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 ++#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 ++#define SFLASH_AT_BUF1_LOAD 0x0253 ++#define SFLASH_AT_BUF2_LOAD 0x0255 ++#define SFLASH_AT_BUF1_COMPARE 0x0260 ++#define SFLASH_AT_BUF2_COMPARE 0x0261 ++#define SFLASH_AT_BUF1_REPROGRAM 0x0258 ++#define SFLASH_AT_BUF2_REPROGRAM 0x0259 + -+/* packet primitives */ -+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) -+#define PKTFREE(drv, skb, send) osl_pktfree((skb)) -+#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data) -+#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len) -+#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head)) -+#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) -+#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next) -+#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) -+#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) -+#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) -+#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) -+#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) -+#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) -+#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) -+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) -+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) -+extern void *osl_pktget(void *drv, uint len, bool send); -+extern void osl_pktfree(void *skb); ++/* Status register bits for Atmel flashes */ ++#define SFLASH_AT_READY 0x80 ++#define SFLASH_AT_MISMATCH 0x40 ++#define SFLASH_AT_ID_MASK 0x38 ++#define SFLASH_AT_ID_SHIFT 3 + -+#else /* BINOSL */ ++/* OTP regions */ ++#define OTP_HW_REGION OTPS_HW_PROTECT ++#define OTP_SW_REGION OTPS_SW_PROTECT ++#define OTP_CID_REGION OTPS_CID_PROTECT + -+/* string library */ -+#ifndef LINUX_OSL -+#undef printf -+#define printf(fmt, args...) osl_printf((fmt), ## args) -+#undef sprintf -+#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) -+#undef strcmp -+#define strcmp(s1, s2) osl_strcmp((s1), (s2)) -+#undef strncmp -+#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) -+#undef strlen -+#define strlen(s) osl_strlen((s)) -+#undef strcpy -+#define strcpy(d, s) osl_strcpy((d), (s)) -+#undef strncpy -+#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) -+#endif -+extern int osl_printf(const char *format, ...); -+extern int osl_sprintf(char *buf, const char *format, ...); -+extern int osl_strcmp(const char *s1, const char *s2); -+extern int osl_strncmp(const char *s1, const char *s2, uint n); -+extern int osl_strlen(char *s); -+extern char* osl_strcpy(char *d, const char *s); -+extern char* osl_strncpy(char *d, const char *s, uint n); ++/* OTP regions (Byte offsets from otp size) */ ++#define OTP_SWLIM_OFF (-8) ++#define OTP_CIDBASE_OFF 0 ++#define OTP_CIDLIM_OFF 8 + -+/* register access macros */ -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = osl_readb((volatile uint8*)(r)); break; \ -+ case sizeof(uint16): __osl_v = osl_readw((volatile uint16*)(r)); break; \ -+ case sizeof(uint32): __osl_v = osl_readl((volatile uint32*)(r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) -+extern uint8 osl_readb(volatile uint8 *r); -+extern uint16 osl_readw(volatile uint16 *r); -+extern uint32 osl_readl(volatile uint32 *r); -+extern void osl_writeb(uint8 v, volatile uint8 *r); -+extern void osl_writew(uint16 v, volatile uint16 *r); -+extern void osl_writel(uint32 v, volatile uint32 *r); ++/* Predefined OTP words (Word offset from otp size) */ ++#define OTP_BOUNDARY_OFF (-4) ++#define OTP_HWSIGN_OFF (-3) ++#define OTP_SWSIGN_OFF (-2) ++#define OTP_CIDSIGN_OFF (-1) + -+/* bcopy, bcmp, and bzero */ -+extern void bcopy(const void *src, void *dst, int len); -+extern int bcmp(const void *b1, const void *b2, int len); -+extern void bzero(void *b, int len); ++#define OTP_CID_OFF 0 ++#define OTP_PKG_OFF 1 ++#define OTP_FID_OFF 2 ++#define OTP_RSV_OFF 3 ++#define OTP_LIM_OFF 4 + -+/* general purpose memory allocation */ -+#define MALLOC(size) osl_malloc((size)) -+#define MFREE(addr, size) osl_mfree((char*)(addr), (size)) -+extern void *osl_malloc(uint size); -+extern void osl_mfree(void *addr, uint size); ++#define OTP_SIGNATURE 0x578a ++#define OTP_MAGIC 0x4e56 + -+/* uncached virtual address */ -+#define OSL_UNCACHED(va) osl_uncached((va)) -+extern void *osl_uncached(void *va); ++#endif /* _SBCHIPC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h +--- linux.old/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h 2005-12-15 15:35:24.538815250 +0100 +@@ -0,0 +1,342 @@ ++/* ++ * Broadcom SiliconBackplane hardware register definitions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+/* get processor cycle count */ -+#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) -+extern uint osl_getcycles(void); ++#ifndef _SBCONFIG_H ++#define _SBCONFIG_H + -+/* dereference an address that may target abort */ -+#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) -+extern int osl_busprobe(uint32 *val, uint32 addr); ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif + -+/* map/unmap physical to virtual */ -+#define REG_MAP(pa, size) osl_reg_map((pa), (size)) -+#define REG_UNMAP(va) osl_reg_unmap((va)) -+extern void *osl_reg_map(uint32 pa, uint size); -+extern void osl_reg_unmap(void *va); ++/* ++ * SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ ++#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ ++#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ ++#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ + -+/* allocate/free shared (dma-able) consistent (uncached) memory */ -+#define DMA_ALLOC_CONSISTENT(dev, size, pap) \ -+ osl_dma_alloc_consistent((dev), (size), (pap)) -+#define DMA_FREE_CONSISTENT(dev, va, size, pa) \ -+ osl_dma_free_consistent((dev), (void*)(va), (size), (pa)) -+extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap); -+extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa); ++#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ ++#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ + -+/* map/unmap direction */ -+#define DMA_TX 1 -+#define DMA_RX 2 ++#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ ++#define SB_FLASH1 0x1fc00000 /* Flash Region 1 */ ++#define SB_FLASH1_SZ 0x00400000 /* Size of Flash Region 1 */ + -+/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(dev, va, size, direction, p) \ -+ osl_dma_map((dev), (va), (size), (direction)) -+#define DMA_UNMAP(dev, pa, size, direction, p) \ -+ osl_dma_unmap((dev), (pa), (size), (direction)) -+extern uint osl_dma_map(void *dev, void *va, uint size, int direction); -+extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction); ++#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */ ++#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ ++#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ ++#define SB_EUART (SB_EXTIF_BASE + 0x00800000) ++#define SB_LED (SB_EXTIF_BASE + 0x00900000) + -+/* microsecond delay */ -+#define OSL_DELAY(usec) osl_delay((usec)) -+extern void osl_delay(uint usec); + -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) bzero((r), (len)) ++/* enumeration space related defs */ ++#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ ++#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) ++#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ ++#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ + -+/* packet primitives */ -+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send)) -+#define PKTFREE(drv, skb, send) osl_pktfree((skb)) -+#define PKTDATA(drv, skb) osl_pktdata((drv), (skb)) -+#define PKTLEN(drv, skb) osl_pktlen((drv), (skb)) -+#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb)) -+#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) -+#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len)) -+#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes)) -+#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes)) -+#define PKTDUP(drv, skb) osl_pktdup((drv), (skb)) -+#define PKTCOOKIE(skb) osl_pktcookie((skb)) -+#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) -+#define PKTLINK(skb) osl_pktlink((skb)) -+#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) -+extern void *osl_pktget(void *drv, uint len, bool send); -+extern void osl_pktfree(void *skb); -+extern uchar *osl_pktdata(void *drv, void *skb); -+extern uint osl_pktlen(void *drv, void *skb); -+extern void *osl_pktnext(void *drv, void *skb); -+extern void osl_pktsetnext(void *skb, void *x); -+extern void osl_pktsetlen(void *drv, void *skb, uint len); -+extern uchar *osl_pktpush(void *drv, void *skb, int bytes); -+extern uchar *osl_pktpull(void *drv, void *skb, int bytes); -+extern void *osl_pktdup(void *drv, void *skb); -+extern void *osl_pktcookie(void *skb); -+extern void osl_pktsetcookie(void *skb, void *x); -+extern void *osl_pktlink(void *skb); -+extern void osl_pktsetlink(void *skb, void *x); -+ -+#endif /* BINOSL */ ++/* mips address */ ++#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + -+#endif /* _linux_osl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-08-28 11:12:20.441857480 +0200 -@@ -0,0 +1,326 @@ +/* -+ * Linux-specific abstractions to gain some independence from linux kernel versions. -+ * Pave over some 2.2 versus 2.4 kernel differences. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * Sonics Configuration Space Registers. + */ ++#define SBIPSFLAG 0x08 ++#define SBTPSFLAG 0x18 ++#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ ++#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ ++#define SBADMATCH3 0x60 ++#define SBADMATCH2 0x68 ++#define SBADMATCH1 0x70 ++#define SBIMSTATE 0x90 ++#define SBINTVEC 0x94 ++#define SBTMSTATELOW 0x98 ++#define SBTMSTATEHIGH 0x9c ++#define SBBWA0 0xa0 ++#define SBIMCONFIGLOW 0xa8 ++#define SBIMCONFIGHIGH 0xac ++#define SBADMATCH0 0xb0 ++#define SBTMCONFIGLOW 0xb8 ++#define SBTMCONFIGHIGH 0xbc ++#define SBBCONFIG 0xc0 ++#define SBBSTATE 0xc8 ++#define SBACTCNFG 0xd8 ++#define SBFLAGST 0xe8 ++#define SBIDLOW 0xf8 ++#define SBIDHIGH 0xfc + -+#ifndef _linuxver_h_ -+#define _linuxver_h_ -+ -+#include -+#include -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) -+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ -+#ifdef __UNDEF_NO_VERSION__ -+#undef __NO_VERSION__ -+#else -+#define __NO_VERSION__ -+#endif -+#endif -+ -+#if defined(MODULE) && defined(MODVERSIONS) -+#include -+#endif -+ -+/* linux/malloc.h is deprecated, use linux/slab.h instead. */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) -+#include -+#else -+#include -+#endif -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifndef __exit -+#define __exit -+#endif -+#ifndef __devexit -+#define __devexit -+#endif -+#ifndef __devinit -+#define __devinit __init -+#endif -+#ifndef __devinitdata -+#define __devinitdata -+#endif -+#ifndef __devexit_p -+#define __devexit_p(x) x -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) -+ -+#define pci_get_drvdata(dev) (dev)->sysdata -+#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) ++#ifndef _LANGUAGE_ASSEMBLY + -+/* -+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration -+ */ ++typedef volatile struct _sbconfig { ++ uint32 PAD[2]; ++ uint32 sbipsflag; /* initiator port ocp slave flag */ ++ uint32 PAD[3]; ++ uint32 sbtpsflag; /* target port ocp slave flag */ ++ uint32 PAD[11]; ++ uint32 sbtmerrloga; /* (sonics >= 2.3) */ ++ uint32 PAD; ++ uint32 sbtmerrlog; /* (sonics >= 2.3) */ ++ uint32 PAD[3]; ++ uint32 sbadmatch3; /* address match3 */ ++ uint32 PAD; ++ uint32 sbadmatch2; /* address match2 */ ++ uint32 PAD; ++ uint32 sbadmatch1; /* address match1 */ ++ uint32 PAD[7]; ++ uint32 sbimstate; /* initiator agent state */ ++ uint32 sbintvec; /* interrupt mask */ ++ uint32 sbtmstatelow; /* target state */ ++ uint32 sbtmstatehigh; /* target state */ ++ uint32 sbbwa0; /* bandwidth allocation table0 */ ++ uint32 PAD; ++ uint32 sbimconfiglow; /* initiator configuration */ ++ uint32 sbimconfighigh; /* initiator configuration */ ++ uint32 sbadmatch0; /* address match0 */ ++ uint32 PAD; ++ uint32 sbtmconfiglow; /* target configuration */ ++ uint32 sbtmconfighigh; /* target configuration */ ++ uint32 sbbconfig; /* broadcast configuration */ ++ uint32 PAD; ++ uint32 sbbstate; /* broadcast state */ ++ uint32 PAD[3]; ++ uint32 sbactcnfg; /* activate configuration */ ++ uint32 PAD[3]; ++ uint32 sbflagst; /* current sbflags */ ++ uint32 PAD[3]; ++ uint32 sbidlow; /* identification */ ++ uint32 sbidhigh; /* identification */ ++} sbconfig_t; + -+struct pci_device_id { -+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ -+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ -+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ -+ unsigned long driver_data; /* Data private to the driver */ -+}; ++#endif /* _LANGUAGE_ASSEMBLY */ + -+struct pci_driver { -+ struct list_head node; -+ char *name; -+ const struct pci_device_id *id_table; /* NULL if wants all devices */ -+ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ -+ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ -+ void (*suspend)(struct pci_dev *dev); /* Device suspended */ -+ void (*resume)(struct pci_dev *dev); /* Device woken up */ -+}; ++/* sbipsflag */ ++#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ ++#define SBIPS_INT1_SHIFT 0 ++#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ ++#define SBIPS_INT2_SHIFT 8 ++#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ ++#define SBIPS_INT3_SHIFT 16 ++#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ ++#define SBIPS_INT4_SHIFT 24 + -+#define MODULE_DEVICE_TABLE(type, name) -+#define PCI_ANY_ID (~0) ++/* sbtpsflag */ ++#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ ++#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ + -+/* compatpci.c */ -+#define pci_module_init pci_register_driver -+extern int pci_register_driver(struct pci_driver *drv); -+extern void pci_unregister_driver(struct pci_driver *drv); ++/* sbtmerrlog */ ++#define SBTMEL_CM 0x00000007 /* command */ ++#define SBTMEL_CI 0x0000ff00 /* connection id */ ++#define SBTMEL_EC 0x0f000000 /* error code */ ++#define SBTMEL_ME 0x80000000 /* multiple error */ + -+#endif /* PCI registration */ ++/* sbimstate */ ++#define SBIM_PC 0xf /* pipecount */ ++#define SBIM_AP_MASK 0x30 /* arbitration policy */ ++#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ ++#define SBIM_AP_TS 0x10 /* use timesliaces only */ ++#define SBIM_AP_TK 0x20 /* use token only */ ++#define SBIM_AP_RSV 0x30 /* reserved */ ++#define SBIM_IBE 0x20000 /* inbanderror */ ++#define SBIM_TO 0x40000 /* timeout */ ++#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ ++#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) -+#ifdef MODULE -+#define module_init(x) int init_module(void) { return x(); } -+#define module_exit(x) void cleanup_module(void) { x(); } -+#else -+#define module_init(x) __initcall(x); -+#define module_exit(x) __exitcall(x); -+#endif -+#endif ++/* sbtmstatelow */ ++#define SBTML_RESET 0x1 /* reset */ ++#define SBTML_REJ_MASK 0x6 /* reject */ ++#define SBTML_REJ_SHIFT 1 ++#define SBTML_CLK 0x10000 /* clock enable */ ++#define SBTML_FGC 0x20000 /* force gated clocks on */ ++#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ ++#define SBTML_PE 0x40000000 /* pme enable */ ++#define SBTML_BE 0x80000000 /* bist enable */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) -+#define list_for_each(pos, head) \ -+ for (pos = (head)->next; pos != (head); pos = pos->next) -+#endif ++/* sbtmstatehigh */ ++#define SBTMH_SERR 0x1 /* serror */ ++#define SBTMH_INT 0x2 /* interrupt */ ++#define SBTMH_BUSY 0x4 /* busy */ ++#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ ++#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ ++#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */ ++#define SBTMH_GCR 0x20000000 /* gated clock request */ ++#define SBTMH_BISTF 0x40000000 /* bist failed */ ++#define SBTMH_BISTD 0x80000000 /* bist done */ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) -+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) -+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) -+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) -+#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) -+#define pci_enable_device(dev) do { } while (0) -+#endif ++/* sbbwa0 */ ++#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ ++#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ ++#define SBBWA_TAB1_SHIFT 16 + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) -+#define net_device device -+#endif ++/* sbimconfiglow */ ++#define SBIMCL_STO_MASK 0x7 /* service timeout */ ++#define SBIMCL_RTO_MASK 0x70 /* request timeout */ ++#define SBIMCL_RTO_SHIFT 4 ++#define SBIMCL_CID_MASK 0xff0000 /* connection id */ ++#define SBIMCL_CID_SHIFT 16 + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) ++/* sbimconfighigh */ ++#define SBIMCH_IEM_MASK 0xc /* inband error mode */ ++#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ ++#define SBIMCH_TEM_SHIFT 4 ++#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ ++#define SBIMCH_BEM_SHIFT 6 + -+/* -+ * DMA mapping -+ * -+ * See linux/Documentation/DMA-mapping.txt -+ */ -+ -+#ifndef PCI_DMA_TODEVICE -+#define PCI_DMA_TODEVICE 1 -+#define PCI_DMA_FROMDEVICE 2 -+#endif -+ -+typedef u32 dma_addr_t; -+ -+/* Pure 2^n version of get_order */ -+static inline int get_order(unsigned long size) -+{ -+ int order; -+ -+ size = (size-1) >> (PAGE_SHIFT-1); -+ order = -1; -+ do { -+ size >>= 1; -+ order++; -+ } while (size); -+ return order; -+} -+ -+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, -+ dma_addr_t *dma_handle) -+{ -+ void *ret; -+ int gfp = GFP_ATOMIC | GFP_DMA; -+ -+ ret = (void *)__get_free_pages(gfp, get_order(size)); -+ -+ if (ret != NULL) { -+ memset(ret, 0, size); -+ *dma_handle = virt_to_bus(ret); -+ } -+ return ret; -+} -+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, -+ void *vaddr, dma_addr_t dma_handle) -+{ -+ free_pages((unsigned long)vaddr, get_order(size)); -+} -+#ifdef ILSIM -+extern uint pci_map_single(void *dev, void *va, uint size, int direction); -+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); -+#else -+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) -+#define pci_unmap_single(cookie, address, size, dir) -+#endif -+ -+#endif /* DMA mapping */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) -+ -+#define dev_kfree_skb_any(a) dev_kfree_skb(a) -+#define netif_down(dev) do { (dev)->start = 0; } while(0) -+ -+/* pcmcia-cs provides its own netdevice compatibility layer */ -+#ifndef _COMPAT_NETDEVICE_H -+ -+/* -+ * SoftNet -+ * -+ * For pre-softnet kernels we need to tell the upper layer not to -+ * re-enter start_xmit() while we are in there. However softnet -+ * guarantees not to enter while we are in there so there is no need -+ * to do the netif_stop_queue() dance unless the transmit queue really -+ * gets stuck. This should also improve performance according to tests -+ * done by Aman Singla. -+ */ -+ -+#define dev_kfree_skb_irq(a) dev_kfree_skb(a) -+#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) -+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) -+ -+static inline void netif_start_queue(struct net_device *dev) -+{ -+ dev->tbusy = 0; -+ dev->interrupt = 0; -+ dev->start = 1; -+} -+ -+#define netif_queue_stopped(dev) (dev)->tbusy -+#define netif_running(dev) (dev)->start -+ -+#endif /* _COMPAT_NETDEVICE_H */ -+ -+#define netif_device_attach(dev) netif_start_queue(dev) -+#define netif_device_detach(dev) netif_stop_queue(dev) -+ -+/* 2.4.x renamed bottom halves to tasklets */ -+#define tasklet_struct tq_struct -+static inline void tasklet_schedule(struct tasklet_struct *tasklet) -+{ -+ queue_task(tasklet, &tq_immediate); -+ mark_bh(IMMEDIATE_BH); -+} -+ -+static inline void tasklet_init(struct tasklet_struct *tasklet, -+ void (*func)(unsigned long), -+ unsigned long data) -+{ -+ tasklet->next = NULL; -+ tasklet->sync = 0; -+ tasklet->routine = (void (*)(void *))func; -+ tasklet->data = (void *)data; -+} -+#define tasklet_kill(tasklet) {do{} while(0);} -+ -+/* 2.4.x introduced del_timer_sync() */ -+#define del_timer_sync(timer) del_timer(timer) -+ -+#else -+ -+#define netif_down(dev) -+ -+#endif /* SoftNet */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) -+ -+/* -+ * Emit code to initialise a tq_struct's routine and data pointers -+ */ -+#define PREPARE_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ (_tq)->routine = _routine; \ -+ (_tq)->data = _data; \ -+ } while (0) -+ -+/* -+ * Emit code to initialise all of a tq_struct -+ */ -+#define INIT_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ INIT_LIST_HEAD(&(_tq)->list); \ -+ (_tq)->sync = 0; \ -+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ -+ } while (0) -+ -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) -+ -+/* Power management related routines */ -+ -+static inline int -+pci_save_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_read_config_dword(dev, i * 4,&buffer[i]); -+ } -+ return 0; -+} -+ -+static inline int -+pci_restore_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_write_config_dword(dev,i * 4, buffer[i]); -+ } -+ /* -+ * otherwise, write the context information we know from bootup. -+ * This works around a problem where warm-booting from Windows -+ * combined with a D3(hot)->D0 transition causes PCI config -+ * header data to be forgotten. -+ */ -+ else { -+ for (i = 0; i < 6; i ++) -+ pci_write_config_dword(dev, -+ PCI_BASE_ADDRESS_0 + (i * 4), -+ pci_resource_start(dev, i)); -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ } -+ return 0; -+} -+ -+#endif /* PCI power management */ -+ -+/* Old cp0 access macros deprecated in 2.4.19 */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) -+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) -+#endif -+ -+#endif /* _linuxver_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h 2005-08-28 11:12:20.441857480 +0200 -@@ -0,0 +1,62 @@ -+/* -+ * Broadcom Home Gateway Reference Design -+ * Ports Web Page Configuration Support Routines -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _nvports_h_ -+#define _nvports_h_ -+ -+#define uint32 unsigned long -+#define uint16 unsigned short -+#define uint unsigned int -+#define uint8 unsigned char -+#define uint64 unsigned long long -+ -+enum FORCE_PORT { -+ FORCE_OFF, -+ FORCE_10H, -+ FORCE_10F, -+ FORCE_100H, -+ FORCE_100F, -+ FORCE_DOWN, -+ POWER_OFF -+}; -+ -+typedef struct _PORT_ATTRIBS -+{ -+ uint autoneg; -+ uint force; -+ uint native; -+} PORT_ATTRIBS; -+ -+extern uint -+nvExistsPortAttrib(char *attrib, uint portno); -+ -+extern int -+nvExistsAnyForcePortAttrib(uint portno); -+ -+extern void -+nvSetPortAttrib(char *attrib, uint portno); -+ -+extern void -+nvUnsetPortAttrib(char *attrib, uint portno); -+ -+extern void -+nvUnsetAllForcePortAttrib(uint portno); -+ -+extern PORT_ATTRIBS -+nvGetSwitchPortAttribs(uint portno); -+ -+#endif /* _nvports_h_ */ -+ -+ -+ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h 2005-08-28 11:12:20.441857480 +0200 -@@ -0,0 +1,38 @@ -+/* -+ * OS Independent Layer -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _osl_h_ -+#define _osl_h_ -+ -+#ifdef V2_HAL -+#include -+#elif defined(linux) -+#include -+#elif PMON -+#include -+#elif defined(NDIS) -+#include -+#elif defined(_CFE_) -+#include -+#elif defined(MACOS9) -+#include -+#elif defined(MACOSX) -+#include -+#else -+#error "Unsupported OSL requested" -+#endif -+ -+/* handy */ -+#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) -+ -+#endif /* _osl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-08-28 11:12:20.442857328 +0200 -@@ -0,0 +1,362 @@ -+/* -+ * pcicfg.h: PCI configuration constants and structures. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _h_pci_ -+#define _h_pci_ -+ -+/* The following inside ifndef's so we don't collide with NTDDK.H */ -+#ifndef PCI_MAX_BUS -+#define PCI_MAX_BUS 0x100 -+#endif -+#ifndef PCI_MAX_DEVICES -+#define PCI_MAX_DEVICES 0x20 -+#endif -+#ifndef PCI_MAX_FUNCTION -+#define PCI_MAX_FUNCTION 0x8 -+#endif -+ -+#ifndef PCI_INVALID_VENDORID -+#define PCI_INVALID_VENDORID 0xffff -+#endif -+#ifndef PCI_INVALID_DEVICEID -+#define PCI_INVALID_DEVICEID 0xffff -+#endif -+ -+ -+/* Convert between bus-slot-function-register and config addresses */ -+ -+#define PCICFG_BUS_SHIFT 16 /* Bus shift */ -+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ -+#define PCICFG_FUN_SHIFT 8 /* Function shift */ -+#define PCICFG_OFF_SHIFT 0 /* Bus shift */ -+ -+#define PCICFG_BUS_MASK 0xff /* Bus mask */ -+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ -+#define PCICFG_FUN_MASK 7 /* Function mask */ -+#define PCICFG_OFF_MASK 0xff /* Bus mask */ -+ -+#define PCI_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ -+ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ -+ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ -+ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) -+ -+#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) -+#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) -+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) -+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) -+ -+ -+/* The actual config space */ -+ -+#define PCI_BAR_MAX 6 -+ -+#define PCI_ROM_BAR 8 -+ -+#define PCR_RSVDA_MAX 2 -+ -+typedef struct _pci_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long base[PCI_BAR_MAX]; -+ unsigned long cardbus_cis; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long baserom; -+ unsigned long rsvd_a[PCR_RSVDA_MAX]; -+ unsigned char int_line; -+ unsigned char int_pin; -+ unsigned char min_gnt; -+ unsigned char max_lat; -+ unsigned char dev_dep[192]; -+} pci_config_regs; -+ -+#define SZPCR (sizeof (pci_config_regs)) -+#define MINSZPCR 64 /* offsetof (dev_dep[0] */ -+ -+/* A structure for the config registers is nice, but in most -+ * systems the config space is not memory mapped, so we need -+ * filed offsetts. :-( -+ */ -+#define PCI_CFG_VID 0 -+#define PCI_CFG_DID 2 -+#define PCI_CFG_CMD 4 -+#define PCI_CFG_STAT 6 -+#define PCI_CFG_REV 8 -+#define PCI_CFG_PROGIF 9 -+#define PCI_CFG_SUBCL 0xa -+#define PCI_CFG_BASECL 0xb -+#define PCI_CFG_CLSZ 0xc -+#define PCI_CFG_LATTIM 0xd -+#define PCI_CFG_HDR 0xe -+#define PCI_CFG_BIST 0xf -+#define PCI_CFG_BAR0 0x10 -+#define PCI_CFG_BAR1 0x14 -+#define PCI_CFG_BAR2 0x18 -+#define PCI_CFG_BAR3 0x1c -+#define PCI_CFG_BAR4 0x20 -+#define PCI_CFG_BAR5 0x24 -+#define PCI_CFG_CIS 0x28 -+#define PCI_CFG_SVID 0x2c -+#define PCI_CFG_SSID 0x2e -+#define PCI_CFG_ROMBAR 0x30 -+#define PCI_CFG_INT 0x3c -+#define PCI_CFG_PIN 0x3d -+#define PCI_CFG_MINGNT 0x3e -+#define PCI_CFG_MAXLAT 0x3f -+ -+/* Classes and subclasses */ -+ -+typedef enum { -+ PCI_CLASS_OLD = 0, -+ PCI_CLASS_DASDI, -+ PCI_CLASS_NET, -+ PCI_CLASS_DISPLAY, -+ PCI_CLASS_MMEDIA, -+ PCI_CLASS_MEMORY, -+ PCI_CLASS_BRIDGE, -+ PCI_CLASS_COMM, -+ PCI_CLASS_BASE, -+ PCI_CLASS_INPUT, -+ PCI_CLASS_DOCK, -+ PCI_CLASS_CPU, -+ PCI_CLASS_SERIAL, -+ PCI_CLASS_INTELLIGENT = 0xe, -+ PCI_CLASS_SATELLITE, -+ PCI_CLASS_CRYPT, -+ PCI_CLASS_DSP, -+ PCI_CLASS_MAX -+} pci_classes; -+ -+typedef enum { -+ PCI_DASDI_SCSI, -+ PCI_DASDI_IDE, -+ PCI_DASDI_FLOPPY, -+ PCI_DASDI_IPI, -+ PCI_DASDI_RAID, -+ PCI_DASDI_OTHER = 0x80 -+} pci_dasdi_subclasses; -+ -+typedef enum { -+ PCI_NET_ETHER, -+ PCI_NET_TOKEN, -+ PCI_NET_FDDI, -+ PCI_NET_ATM, -+ PCI_NET_OTHER = 0x80 -+} pci_net_subclasses; -+ -+typedef enum { -+ PCI_DISPLAY_VGA, -+ PCI_DISPLAY_XGA, -+ PCI_DISPLAY_3D, -+ PCI_DISPLAY_OTHER = 0x80 -+} pci_display_subclasses; -+ -+typedef enum { -+ PCI_MMEDIA_VIDEO, -+ PCI_MMEDIA_AUDIO, -+ PCI_MMEDIA_PHONE, -+ PCI_MEDIA_OTHER = 0x80 -+} pci_mmedia_subclasses; -+ -+typedef enum { -+ PCI_MEMORY_RAM, -+ PCI_MEMORY_FLASH, -+ PCI_MEMORY_OTHER = 0x80 -+} pci_memory_subclasses; -+ -+typedef enum { -+ PCI_BRIDGE_HOST, -+ PCI_BRIDGE_ISA, -+ PCI_BRIDGE_EISA, -+ PCI_BRIDGE_MC, -+ PCI_BRIDGE_PCI, -+ PCI_BRIDGE_PCMCIA, -+ PCI_BRIDGE_NUBUS, -+ PCI_BRIDGE_CARDBUS, -+ PCI_BRIDGE_RACEWAY, -+ PCI_BRIDGE_OTHER = 0x80 -+} pci_bridge_subclasses; -+ -+typedef enum { -+ PCI_COMM_UART, -+ PCI_COMM_PARALLEL, -+ PCI_COMM_MULTIUART, -+ PCI_COMM_MODEM, -+ PCI_COMM_OTHER = 0x80 -+} pci_comm_subclasses; -+ -+typedef enum { -+ PCI_BASE_PIC, -+ PCI_BASE_DMA, -+ PCI_BASE_TIMER, -+ PCI_BASE_RTC, -+ PCI_BASE_PCI_HOTPLUG, -+ PCI_BASE_OTHER = 0x80 -+} pci_base_subclasses; -+ -+typedef enum { -+ PCI_INPUT_KBD, -+ PCI_INPUT_PEN, -+ PCI_INPUT_MOUSE, -+ PCI_INPUT_SCANNER, -+ PCI_INPUT_GAMEPORT, -+ PCI_INPUT_OTHER = 0x80 -+} pci_input_subclasses; -+ -+typedef enum { -+ PCI_DOCK_GENERIC, -+ PCI_DOCK_OTHER = 0x80 -+} pci_dock_subclasses; -+ -+typedef enum { -+ PCI_CPU_386, -+ PCI_CPU_486, -+ PCI_CPU_PENTIUM, -+ PCI_CPU_ALPHA = 0x10, -+ PCI_CPU_POWERPC = 0x20, -+ PCI_CPU_MIPS = 0x30, -+ PCI_CPU_COPROC = 0x40, -+ PCI_CPU_OTHER = 0x80 -+} pci_cpu_subclasses; -+ -+typedef enum { -+ PCI_SERIAL_IEEE1394, -+ PCI_SERIAL_ACCESS, -+ PCI_SERIAL_SSA, -+ PCI_SERIAL_USB, -+ PCI_SERIAL_FIBER, -+ PCI_SERIAL_SMBUS, -+ PCI_SERIAL_OTHER = 0x80 -+} pci_serial_subclasses; -+ -+typedef enum { -+ PCI_INTELLIGENT_I2O, -+} pci_intelligent_subclasses; -+ -+typedef enum { -+ PCI_SATELLITE_TV, -+ PCI_SATELLITE_AUDIO, -+ PCI_SATELLITE_VOICE, -+ PCI_SATELLITE_DATA, -+ PCI_SATELLITE_OTHER = 0x80 -+} pci_satellite_subclasses; -+ -+typedef enum { -+ PCI_CRYPT_NETWORK, -+ PCI_CRYPT_ENTERTAINMENT, -+ PCI_CRYPT_OTHER = 0x80 -+} pci_crypt_subclasses; -+ -+typedef enum { -+ PCI_DSP_DPIO, -+ PCI_DSP_OTHER = 0x80 -+} pci_dsp_subclasses; -+ -+/* Header types */ -+typedef enum { -+ PCI_HEADER_NORMAL, -+ PCI_HEADER_BRIDGE, -+ PCI_HEADER_CARDBUS -+} pci_header_types; -+ -+ -+/* Overlay for a PCI-to-PCI bridge */ -+ -+#define PPB_RSVDA_MAX 2 -+#define PPB_RSVDD_MAX 8 -+ -+typedef struct _ppb_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long rsvd_a[PPB_RSVDA_MAX]; -+ unsigned char prim_bus; -+ unsigned char sec_bus; -+ unsigned char sub_bus; -+ unsigned char sec_lat; -+ unsigned char io_base; -+ unsigned char io_lim; -+ unsigned short sec_status; -+ unsigned short mem_base; -+ unsigned short mem_lim; -+ unsigned short pf_mem_base; -+ unsigned short pf_mem_lim; -+ unsigned long pf_mem_base_hi; -+ unsigned long pf_mem_lim_hi; -+ unsigned short io_base_hi; -+ unsigned short io_lim_hi; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long rsvd_b; -+ unsigned char rsvd_c; -+ unsigned char int_pin; -+ unsigned short bridge_ctrl; -+ unsigned char chip_ctrl; -+ unsigned char diag_ctrl; -+ unsigned short arb_ctrl; -+ unsigned long rsvd_d[PPB_RSVDD_MAX]; -+ unsigned char dev_dep[192]; -+} ppb_config_regs; -+ -+/* Eveything below is BRCM HND proprietary */ -+ -+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ -+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ -+#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ -+#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ -+#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ -+#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ -+#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ -+#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ -+#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ -+#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ -+#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ -+#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ -+ -+#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ -+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ -+ -+/* PCI_INT_MASK */ -+#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ -+#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ -+ -+/* PCI_SPROM_CONTROL */ -+#define SPROM_BLANK 0x04 /* indicating a blank sprom */ -+#define SPROM_WRITEEN 0x10 /* sprom write enable */ -+#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ -+ -+#define SPROM_SIZE 256 /* sprom size in 16-bit */ -+#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ -+ -+#endif -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-08-28 11:12:20.450856112 +0200 -@@ -0,0 +1,679 @@ -+/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Fundamental types and constants relating to 802.11 -+ * -+ * $Id$ -+ */ -+ -+#ifndef _802_11_H_ -+#define _802_11_H_ -+ -+#ifndef _TYPEDEFS_H_ -+#include -+#endif -+ -+#ifndef _NET_ETHERNET_H_ -+#include -+#endif -+ -+/* enable structure packing */ -+#if !defined(__GNUC__) -+#pragma pack(1) -+#endif -+ -+/* some platforms require stronger medicine */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#define PACKED -+#endif -+ -+ -+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ -+ -+/* Generic 802.11 frame constants */ -+#define DOT11_A3_HDR_LEN 24 -+#define DOT11_A4_HDR_LEN 30 -+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN -+#define DOT11_FCS_LEN 4 -+#define DOT11_ICV_LEN 4 -+#define DOT11_ICV_AES_LEN 8 -+ -+ -+#define DOT11_KEY_INDEX_SHIFT 6 -+#define DOT11_IV_LEN 4 -+#define DOT11_IV_TKIP_LEN 8 -+#define DOT11_IV_AES_OCB_LEN 4 -+#define DOT11_IV_AES_CCM_LEN 8 -+ -+#define DOT11_MAX_MPDU_BODY_LEN 2312 -+#define DOT11_MAX_MPDU_LEN 2346 /* body len + A4 hdr + FCS */ -+#define DOT11_MAX_SSID_LEN 32 -+ -+/* dot11RTSThreshold */ -+#define DOT11_DEFAULT_RTS_LEN 2347 -+#define DOT11_MAX_RTS_LEN 2347 -+ -+/* dot11FragmentationThreshold */ -+#define DOT11_MIN_FRAG_LEN 256 -+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ -+#define DOT11_DEFAULT_FRAG_LEN 2346 -+ -+/* dot11BeaconPeriod */ -+#define DOT11_MIN_BEACON_PERIOD 1 -+#define DOT11_MAX_BEACON_PERIOD 0xFFFF -+ -+/* dot11DTIMPeriod */ -+#define DOT11_MIN_DTIM_PERIOD 1 -+#define DOT11_MAX_DTIM_PERIOD 0xFF -+ -+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ -+#define DOT11_LLC_SNAP_HDR_LEN 8 -+#define DOT11_OUI_LEN 3 -+struct dot11_llc_snap_header { -+ uint8 dsap; /* always 0xAA */ -+ uint8 ssap; /* always 0xAA */ -+ uint8 ctl; /* always 0x03 */ -+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 -+ Bridge-Tunnel: 0x00 0x00 0xF8 */ -+ uint16 type; /* ethertype */ -+} PACKED; -+ -+/* RFC1042 header used by 802.11 per 802.1H */ -+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) -+ -+/* Generic 802.11 MAC header */ -+/* -+ * N.B.: This struct reflects the full 4 address 802.11 MAC header. -+ * The fields are defined such that the shorter 1, 2, and 3 -+ * address headers just use the first k fields. -+ */ -+struct dot11_header { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr a1; /* address 1 */ -+ struct ether_addr a2; /* address 2 */ -+ struct ether_addr a3; /* address 3 */ -+ uint16 seq; /* sequence control */ -+ struct ether_addr a4; /* address 4 */ -+} PACKED; -+ -+/* Control frames */ -+ -+struct dot11_rts_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+ struct ether_addr ta; /* transmitter address */ -+} PACKED; -+#define DOT11_RTS_LEN 16 -+ -+struct dot11_cts_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+} PACKED; -+#define DOT11_CTS_LEN 10 -+ -+struct dot11_ack_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+} PACKED; -+#define DOT11_ACK_LEN 10 -+ -+struct dot11_ps_poll_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* AID */ -+ struct ether_addr bssid; /* receiver address, STA in AP */ -+ struct ether_addr ta; /* transmitter address */ -+} PACKED; -+#define DOT11_PS_POLL_LEN 16 -+ -+struct dot11_cf_end_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+ struct ether_addr bssid; /* transmitter address, STA in AP */ -+} PACKED; -+#define DOT11_CS_END_LEN 16 -+ -+/* Management frame header */ -+struct dot11_management_header { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr da; /* receiver address */ -+ struct ether_addr sa; /* transmitter address */ -+ struct ether_addr bssid; /* BSS ID */ -+ uint16 seq; /* sequence control */ -+} PACKED; -+#define DOT11_MGMT_HDR_LEN 24 -+ -+/* Management frame payloads */ -+ -+struct dot11_bcn_prb { -+ uint32 timestamp[2]; -+ uint16 beacon_interval; -+ uint16 capability; -+} PACKED; -+#define DOT11_BCN_PRB_LEN 12 -+ -+struct dot11_auth { -+ uint16 alg; /* algorithm */ -+ uint16 seq; /* sequence control */ -+ uint16 status; /* status code */ -+} PACKED; -+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ -+ -+struct dot11_assoc_req { -+ uint16 capability; /* capability information */ -+ uint16 listen; /* listen interval */ -+} PACKED; -+ -+struct dot11_assoc_resp { -+ uint16 capability; /* capability information */ -+ uint16 status; /* status code */ -+ uint16 aid; /* association ID */ -+} PACKED; -+ -+struct dot11_action_measure { -+ uint8 category; -+ uint8 action; -+ uint8 token; -+ uint8 data[1]; -+} PACKED; -+#define DOT11_ACTION_MEASURE_LEN 3 -+ -+/************** -+ 802.11h related definitions. -+**************/ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 power; -+} dot11_power_cnst_t; -+ -+typedef struct { -+ uint8 min; -+ uint8 max; -+} dot11_power_cap_t; -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 tx_pwr; -+ uint8 margin; -+} dot11_tpc_rep_t; -+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 first_channel; -+ uint8 num_channels; -+} dot11_supp_channels_t; -+ -+struct dot11_channel_switch { -+ uint8 id; -+ uint8 len; -+ uint8 mode; -+ uint8 channel; -+ uint8 count; -+} PACKED; -+typedef struct dot11_channel_switch dot11_channel_switch_t; -+ -+/* 802.11h Measurement Request/Report IEs */ -+/* Measurement Type field */ -+#define DOT11_MEASURE_TYPE_BASIC 0 -+#define DOT11_MEASURE_TYPE_CCA 1 -+#define DOT11_MEASURE_TYPE_RPI 2 -+ -+/* Measurement Mode field */ -+ -+/* Measurement Request Modes */ -+#define DOT11_MEASURE_MODE_ENABLE (1<<1) -+#define DOT11_MEASURE_MODE_REQUEST (1<<2) -+#define DOT11_MEASURE_MODE_REPORT (1<<3) -+/* Measurement Report Modes */ -+#define DOT11_MEASURE_MODE_LATE (1<<0) -+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) -+#define DOT11_MEASURE_MODE_REFUSED (1<<2) -+/* Basic Measurement Map bits */ -+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) -+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) -+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) -+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) -+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 token; -+ uint8 mode; -+ uint8 type; -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+} dot11_meas_req_t; -+#define DOT11_MNG_IE_MREQ_LEN 14 -+/* length of Measure Request IE data not including variable len */ -+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 -+ -+struct dot11_meas_rep { -+ uint8 id; -+ uint8 len; -+ uint8 token; -+ uint8 mode; -+ uint8 type; -+ union -+ { -+ struct { -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+ uint8 map; -+ } PACKED basic; -+ uint8 data[1]; -+ } PACKED rep; -+} PACKED; -+typedef struct dot11_meas_rep dot11_meas_rep_t; -+ -+/* length of Measure Report IE data not including variable len */ -+#define DOT11_MNG_IE_MREP_FIXED_LEN 3 -+ -+struct dot11_meas_rep_basic { -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+ uint8 map; -+} PACKED; -+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; -+#define DOT11_MEASURE_BASIC_REP_LEN 12 -+ -+struct dot11_quiet { -+ uint8 id; -+ uint8 len; -+ uint8 count; /* TBTTs until beacon interval in quiet starts */ -+ uint8 period; /* Beacon intervals between periodic quiet periods ? */ -+ uint16 duration;/* Length of quiet period, in TU's */ -+ uint16 offset; /* TU's offset from TBTT in Count field */ -+} PACKED; -+typedef struct dot11_quiet dot11_quiet_t; -+ -+typedef struct { -+ uint8 channel; -+ uint8 map; -+} chan_map_tuple_t; -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 eaddr[ETHER_ADDR_LEN]; -+ uint8 interval; -+ chan_map_tuple_t map[1]; -+} dot11_ibss_dfs_t; -+ -+ -+/* Macro to take a pointer to a beacon or probe response -+ * header and return the char* pointer to the SSID info element -+ */ -+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) -+ -+/* Authentication frame payload constants */ -+#define DOT11_OPEN_SYSTEM 0 -+#define DOT11_SHARED_KEY 1 -+#define DOT11_CHALLENGE_LEN 128 -+ -+/* Frame control macros */ -+#define FC_PVER_MASK 0x3 -+#define FC_PVER_SHIFT 0 -+#define FC_TYPE_MASK 0xC -+#define FC_TYPE_SHIFT 2 -+#define FC_SUBTYPE_MASK 0xF0 -+#define FC_SUBTYPE_SHIFT 4 -+#define FC_TODS 0x100 -+#define FC_TODS_SHIFT 8 -+#define FC_FROMDS 0x200 -+#define FC_FROMDS_SHIFT 9 -+#define FC_MOREFRAG 0x400 -+#define FC_MOREFRAG_SHIFT 10 -+#define FC_RETRY 0x800 -+#define FC_RETRY_SHIFT 11 -+#define FC_PM 0x1000 -+#define FC_PM_SHIFT 12 -+#define FC_MOREDATA 0x2000 -+#define FC_MOREDATA_SHIFT 13 -+#define FC_WEP 0x4000 -+#define FC_WEP_SHIFT 14 -+#define FC_ORDER 0x8000 -+#define FC_ORDER_SHIFT 15 -+ -+/* sequence control macros */ -+#define SEQNUM_SHIFT 4 -+#define FRAGNUM_MASK 0xF -+ -+/* Frame Control type/subtype defs */ -+ -+/* FC Types */ -+#define FC_TYPE_MNG 0 -+#define FC_TYPE_CTL 1 -+#define FC_TYPE_DATA 2 -+ -+/* Management Subtypes */ -+#define FC_SUBTYPE_ASSOC_REQ 0 -+#define FC_SUBTYPE_ASSOC_RESP 1 -+#define FC_SUBTYPE_REASSOC_REQ 2 -+#define FC_SUBTYPE_REASSOC_RESP 3 -+#define FC_SUBTYPE_PROBE_REQ 4 -+#define FC_SUBTYPE_PROBE_RESP 5 -+#define FC_SUBTYPE_BEACON 8 -+#define FC_SUBTYPE_ATIM 9 -+#define FC_SUBTYPE_DISASSOC 10 -+#define FC_SUBTYPE_AUTH 11 -+#define FC_SUBTYPE_DEAUTH 12 -+#define FC_SUBTYPE_ACTION 13 -+ -+/* Control Subtypes */ -+#define FC_SUBTYPE_PS_POLL 10 -+#define FC_SUBTYPE_RTS 11 -+#define FC_SUBTYPE_CTS 12 -+#define FC_SUBTYPE_ACK 13 -+#define FC_SUBTYPE_CF_END 14 -+#define FC_SUBTYPE_CF_END_ACK 15 -+ -+/* Data Subtypes */ -+#define FC_SUBTYPE_DATA 0 -+#define FC_SUBTYPE_DATA_CF_ACK 1 -+#define FC_SUBTYPE_DATA_CF_POLL 2 -+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 -+#define FC_SUBTYPE_NULL 4 -+#define FC_SUBTYPE_CF_ACK 5 -+#define FC_SUBTYPE_CF_POLL 6 -+#define FC_SUBTYPE_CF_ACK_POLL 7 -+ -+/* type-subtype combos */ -+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) -+ -+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) -+ -+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) -+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) -+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) -+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) -+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) -+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) -+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) -+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) -+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) -+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) -+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) -+ -+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) -+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) -+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) -+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) -+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) -+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) -+ -+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) -+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) -+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) -+ -+/* Management Frames */ -+ -+/* Management Frame Constants */ -+ -+/* Fixed fields */ -+#define DOT11_MNG_AUTH_ALGO_LEN 2 -+#define DOT11_MNG_AUTH_SEQ_LEN 2 -+#define DOT11_MNG_BEACON_INT_LEN 2 -+#define DOT11_MNG_CAP_LEN 2 -+#define DOT11_MNG_AP_ADDR_LEN 6 -+#define DOT11_MNG_LISTEN_INT_LEN 2 -+#define DOT11_MNG_REASON_LEN 2 -+#define DOT11_MNG_AID_LEN 2 -+#define DOT11_MNG_STATUS_LEN 2 -+#define DOT11_MNG_TIMESTAMP_LEN 8 -+ -+/* DUR/ID field in assoc resp is 0xc000 | AID */ -+#define DOT11_AID_MASK 0x3fff -+ -+/* Reason Codes */ -+#define DOT11_RC_RESERVED 0 -+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ -+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ -+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is -+ leaving (or has left) IBSS or ESS */ -+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ -+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle -+ all currently associated stations */ -+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from -+ nonauthenticated station */ -+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from -+ nonassociated station */ -+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is -+ leaving (or has left) BSS */ -+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is -+ not authenticated with responding station */ -+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ -+ -+/* Status Codes */ -+#define DOT11_STATUS_SUCCESS 0 /* Successful */ -+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ -+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities -+ in the Capability Information field */ -+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to -+ confirm that association exists */ -+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside -+ the scope of this standard */ -+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the -+ specified authentication algorithm */ -+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with -+ authentication transaction sequence number -+ out of expected sequence */ -+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ -+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting -+ for next frame in sequence */ -+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to -+ handle additional associated stations */ -+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station -+ not supporting all of the data rates in the -+ BSSBasicRateSet parameter */ -+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station -+ not supporting the Short Preamble option */ -+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station -+ not supporting the PBCC Modulation option */ -+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station -+ not supporting the Channel Agility option */ -+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management -+ capability is required. */ -+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the -+ Power Cap element is unacceptable. */ -+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the -+ Supported Channel element is unacceptable */ -+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station -+ not supporting the Short Slot Time option */ -+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station -+ not supporting the ER-PBCC Modulation option */ -+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station -+ not supporting the DSS-OFDM option */ -+ -+/* Info Elts, length of INFORMATION portion of Info Elts */ -+#define DOT11_MNG_DS_PARAM_LEN 1 -+#define DOT11_MNG_IBSS_PARAM_LEN 2 -+ -+/* TIM Info element has 3 bytes fixed info in INFORMATION field, -+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */ -+#define DOT11_MNG_TIM_FIXED_LEN 3 -+#define DOT11_MNG_TIM_DTIM_COUNT 0 -+#define DOT11_MNG_TIM_DTIM_PERIOD 1 -+#define DOT11_MNG_TIM_BITMAP_CTL 2 -+#define DOT11_MNG_TIM_PVB 3 -+ -+/* TLV defines */ -+#define TLV_TAG_OFF 0 -+#define TLV_LEN_OFF 1 -+#define TLV_HDR_LEN 2 -+#define TLV_BODY_OFF 2 -+ -+/* Management Frame Information Element IDs */ -+#define DOT11_MNG_SSID_ID 0 -+#define DOT11_MNG_RATES_ID 1 -+#define DOT11_MNG_FH_PARMS_ID 2 -+#define DOT11_MNG_DS_PARMS_ID 3 -+#define DOT11_MNG_CF_PARMS_ID 4 -+#define DOT11_MNG_TIM_ID 5 -+#define DOT11_MNG_IBSS_PARMS_ID 6 -+#define DOT11_MNG_COUNTRY_ID 7 -+#define DOT11_MNG_HOPPING_PARMS_ID 8 -+#define DOT11_MNG_HOPPING_TABLE_ID 9 -+#define DOT11_MNG_REQUEST_ID 10 -+#define DOT11_MNG_CHALLENGE_ID 16 -+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ -+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ -+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ -+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ -+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ -+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ -+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ -+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ -+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ -+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ -+#define DOT11_MNG_ERP_ID 42 -+#define DOT11_MNG_NONERP_ID 47 -+#define DOT11_MNG_EXT_RATES_ID 50 -+#define DOT11_MNG_WPA_ID 221 -+#define DOT11_MNG_PROPR_ID 221 -+ -+/* ERP info element bit values */ -+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ -+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ -+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ -+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ -+ -+/* Capability Information Field */ -+#define DOT11_CAP_ESS 0x0001 -+#define DOT11_CAP_IBSS 0x0002 -+#define DOT11_CAP_POLLABLE 0x0004 -+#define DOT11_CAP_POLL_RQ 0x0008 -+#define DOT11_CAP_PRIVACY 0x0010 -+#define DOT11_CAP_SHORT 0x0020 -+#define DOT11_CAP_PBCC 0x0040 -+#define DOT11_CAP_AGILITY 0x0080 -+#define DOT11_CAP_SPECTRUM 0x0100 -+#define DOT11_CAP_SHORTSLOT 0x0400 -+#define DOT11_CAP_CCK_OFDM 0x2000 -+ -+/* Action Frame Constants */ -+#define DOT11_ACTION_CAT_ERR_MASK 0x10 -+#define DOT11_ACTION_CAT_SPECT_MNG 0x00 -+ -+#define DOT11_ACTION_ID_M_REQ 0 -+#define DOT11_ACTION_ID_M_REP 1 -+#define DOT11_ACTION_ID_TPC_REQ 2 -+#define DOT11_ACTION_ID_TPC_REP 3 -+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 -+ -+/* MLME Enumerations */ -+#define DOT11_BSSTYPE_INFRASTRUCTURE 0 -+#define DOT11_BSSTYPE_INDEPENDENT 1 -+#define DOT11_BSSTYPE_ANY 2 -+#define DOT11_SCANTYPE_ACTIVE 0 -+#define DOT11_SCANTYPE_PASSIVE 1 -+ -+/* 802.11 A PHY constants */ -+#define APHY_SLOT_TIME 9 -+#define APHY_SIFS_TIME 16 -+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) -+#define APHY_PREAMBLE_TIME 16 -+#define APHY_SIGNAL_TIME 4 -+#define APHY_SYMBOL_TIME 4 -+#define APHY_SERVICE_NBITS 16 -+#define APHY_TAIL_NBITS 6 -+#define APHY_CWMIN 15 -+ -+/* 802.11 B PHY constants */ -+#define BPHY_SLOT_TIME 20 -+#define BPHY_SIFS_TIME 10 -+#define BPHY_DIFS_TIME 50 -+#define BPHY_PLCP_TIME 192 -+#define BPHY_PLCP_SHORT_TIME 96 -+#define BPHY_CWMIN 31 -+ -+/* 802.11 G constants */ -+#define DOT11_OFDM_SIGNAL_EXTENSION 6 -+ -+#define PHY_CWMAX 1023 -+ -+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ -+ -+/* dot11Counters Table - 802.11 spec., Annex D */ -+typedef struct d11cnt { -+ uint32 txfrag; /* dot11TransmittedFragmentCount */ -+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ -+ uint32 txfail; /* dot11FailedCount */ -+ uint32 txretry; /* dot11RetryCount */ -+ uint32 txretrie; /* dot11MultipleRetryCount */ -+ uint32 rxdup; /* dot11FrameduplicateCount */ -+ uint32 txrts; /* dot11RTSSuccessCount */ -+ uint32 txnocts; /* dot11RTSFailureCount */ -+ uint32 txnoack; /* dot11ACKFailureCount */ -+ uint32 rxfrag; /* dot11ReceivedFragmentCount */ -+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ -+ uint32 rxcrc; /* dot11FCSErrorCount */ -+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */ -+ uint32 rxundec; /* dot11WEPUndecryptableCount */ -+} d11cnt_t; -+ -+/* BRCM OUI */ -+#define BRCM_OUI "\x00\x10\x18" -+ -+/* WPA definitions */ -+#define WPA_VERSION 1 -+#define WPA_OUI "\x00\x50\xF2" -+ -+#define WPA_OUI_LEN 3 -+ -+/* WPA authentication modes */ -+#define WPA_AUTH_NONE 0 /* None */ -+#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */ -+#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */ -+#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */ -+ -+#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \ -+ (auth) == WPA_AUTH_UNSPECIFIED || \ -+ (auth) == WPA_AUTH_PSK) -+ -+ -+/* Key related defines */ -+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ -+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ -+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ -+ -+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ -+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ -+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ -+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -+#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ -+#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ -+#define AES_KEY_SIZE 16 /* size of AES key */ -+ -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() -+#endif -+ -+#endif /* _802_11_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-08-28 11:12:20.450856112 +0200 -@@ -0,0 +1,145 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. -+ ******************************************************************************/ -+ -+#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ -+#define _NET_ETHERNET_H_ -+ -+#ifndef _TYPEDEFS_H_ -+#include "typedefs.h" -+#endif -+ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#define PACKED -+#endif -+ -+/* -+ * The number of bytes in an ethernet (MAC) address. -+ */ -+#define ETHER_ADDR_LEN 6 -+ -+/* -+ * The number of bytes in the type field. -+ */ -+#define ETHER_TYPE_LEN 2 -+ -+/* -+ * The number of bytes in the trailing CRC field. -+ */ -+#define ETHER_CRC_LEN 4 -+ -+/* -+ * The length of the combined header. -+ */ -+#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) -+ -+/* -+ * The minimum packet length. -+ */ -+#define ETHER_MIN_LEN 64 -+ -+/* -+ * The minimum packet user data length. -+ */ -+#define ETHER_MIN_DATA 46 -+ -+/* -+ * The maximum packet length. -+ */ -+#define ETHER_MAX_LEN 1518 -+ -+/* -+ * The maximum packet user data length. -+ */ -+#define ETHER_MAX_DATA 1500 -+ -+/* -+ * Used to uniquely identify a 802.1q VLAN-tagged header. -+ */ -+#define VLAN_TAG 0x8100 -+ -+/* -+ * Located after dest & src address in ether header. -+ */ -+#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2) -+ -+/* -+ * 4 bytes of vlan field info. -+ */ -+#define VLAN_FIELDS_SIZE 4 -+ -+/* location of pri bits in 16-bit vlan fields */ -+#define VLAN_PRI_SHIFT 13 -+ -+/* 3 bits of priority */ -+#define VLAN_PRI_MASK 7 -+ -+/* 802.1X ethertype */ -+#define ETHER_TYPE_802_1X 0x888e -+ -+/* -+ * A macro to validate a length with -+ */ -+#define ETHER_IS_VALID_LEN(foo) \ -+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) -+ -+ -+#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ -+/* -+ * Structure of a 10Mb/s Ethernet header. -+ */ -+struct ether_header { -+ uint8 ether_dhost[ETHER_ADDR_LEN]; -+ uint8 ether_shost[ETHER_ADDR_LEN]; -+ uint16 ether_type; -+} PACKED ; -+ -+/* -+ * Structure of a 48-bit Ethernet address. -+ */ -+struct ether_addr { -+ uint8 octet[ETHER_ADDR_LEN]; -+} PACKED ; -+#endif -+ -+/* -+ * Takes a pointer, returns true if a 48-bit multicast address -+ * (including broadcast, since it is all ones) -+ */ -+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) -+ -+/* -+ * Takes a pointer, returns true if a 48-bit broadcast (all ones) -+ */ -+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ -+ ((uint8 *)(ea))[1] & \ -+ ((uint8 *)(ea))[2] & \ -+ ((uint8 *)(ea))[3] & \ -+ ((uint8 *)(ea))[4] & \ -+ ((uint8 *)(ea))[5]) == 0xff) -+ -+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; -+ -+/* -+ * Takes a pointer, returns true if a 48-bit null address (all zeros) -+ */ -+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ -+ ((uint8 *)(ea))[1] | \ -+ ((uint8 *)(ea))[2] | \ -+ ((uint8 *)(ea))[3] | \ -+ ((uint8 *)(ea))[4] | \ -+ ((uint8 *)(ea))[5]) == 0) -+ -+#undef PACKED -+ -+#endif /* _NET_ETHERNET_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-08-28 11:12:20.451855960 +0200 -@@ -0,0 +1,69 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * crc.h - a function to compute crc for iLine10 headers -+ ******************************************************************************/ -+ -+#ifndef _RTS_CRC_H_ -+#define _RTS_CRC_H_ 1 -+ -+#include "typedefs.h" -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+ -+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -+#define HCS_GOOD_VALUE 0x39 /* Good final header checksum value */ -+ -+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -+ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ -+ -+void hcs(uint8 *, uint); -+uint8 crc8(uint8 *, uint, uint8); -+uint16 crc16(uint8 *, uint, uint16); -+uint32 crc32(uint8 *, uint, uint32); -+ -+/* macros for common usage */ -+ -+#define APPEND_CRC8(pbytes, nbytes) \ -+do { \ -+ uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \ -+ (pbytes)[(nbytes)] = tmp; \ -+ (nbytes) += 1; \ -+} while (0) -+ -+#define APPEND_CRC16(pbytes, nbytes) \ -+do { \ -+ uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \ -+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ -+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ -+ (nbytes) += 2; \ -+} while (0) -+ -+#define APPEND_CRC32(pbytes, nbytes) \ -+do { \ -+ uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \ -+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ -+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ -+ (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff; \ -+ (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff; \ -+ (nbytes) += 4; \ -+} while (0) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _RTS_CRC_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h 2005-08-28 11:12:20.451855960 +0200 -@@ -0,0 +1,103 @@ -+#ifndef _S5_H_ -+#define _S5_H_ -+/* -+ * Copyright 2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core -+ * and MIPS3301 (R4K) System Address Space -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation, located in the file -+ * LICENSE. -+ * -+ * $Id: s5.h,v 1.3 2003/06/10 18:54:51 jfd Exp $ -+ * -+ */ -+ -+/* BCM5365 Address map */ -+#define KSEG1ADDR(x) ( (x) | 0xa0000000) -+#define BCM5365_SDRAM 0x00000000 /* 0-128MB Physical SDRAM */ -+#define BCM5365_PCI_MEM 0x08000000 /* Host Mode PCI mem space (64MB) */ -+#define BCM5365_PCI_CFG 0x0c000000 /* Host Mode PCI cfg space (64MB) */ -+#define BCM5365_PCI_DMA 0x40000000 /* Client Mode PCI mem space (1GB)*/ -+#define BCM5365_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define BCM5365_ENUM 0x18000000 /* Beginning of core enum space */ -+ -+/* BCM5365 Core register space */ -+#define BCM5365_REG_CHIPC 0x18000000 /* Chipcommon registers */ -+#define BCM5365_REG_EMAC0 0x18001000 /* Ethernet MAC0 core registers */ -+#define BCM5365_REG_IPSEC 0x18002000 /* BCM582x CryptoCore registers */ -+#define BCM5365_REG_USB 0x18003000 /* USB core registers */ -+#define BCM5365_REG_PCI 0x18004000 /* PCI core registers */ -+#define BCM5365_REG_MIPS33 0x18005000 /* MIPS core registers */ -+#define BCM5365_REG_MEMC 0x18006000 /* MEMC core registers */ -+#define BCM5365_REG_UARTS (BCM5365_REG_CHIPC + 0x300) /* UART regs */ -+#define BCM5365_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+/* COM Ports 1/2 */ -+#define BCM5365_UART (BCM5365_REG_UARTS) -+#define BCM5365_UART_COM2 (BCM5365_REG_UARTS + 0x00000100) -+ -+/* Registers common to MIPS33 Core used in 5365 */ -+#define MIPS33_FLASH_REGION 0x1fc00000 /* Boot FLASH Region */ -+#define MIPS33_EXTIF_REGION 0x1a000000 /* Chipcommon EXTIF region*/ -+#define BCM5365_EXTIF 0x1b000000 /* MISC_CS */ -+#define MIPS33_FLASH_REGION_AUX 0x1c000000 /* FLASH Region 2*/ -+ -+/* Internal Core Sonics Backplane Devices */ -+#define INTERNAL_UART_COM1 BCM5365_UART -+#define INTERNAL_UART_COM2 BCM5365_UART_COM2 -+#define SB_REG_CHIPC BCM5365_REG_CHIPC -+#define SB_REG_ENET0 BCM5365_REG_EMAC0 -+#define SB_REG_IPSEC BCM5365_REG_IPSEC -+#define SB_REG_USB BCM5365_REG_USB -+#define SB_REG_PCI BCM5365_REG_PCI -+#define SB_REG_MIPS BCM5365_REG_MIPS33 -+#define SB_REG_MEMC BCM5365_REG_MEMC -+#define SB_REG_MEMC_OFF 0x6000 -+#define SB_EXTIF_SPACE MIPS33_EXTIF_REGION -+#define SB_FLASH_SPACE MIPS33_FLASH_REGION -+ -+/* -+ * XXX -+ * 5365-specific backplane interrupt flag numbers. This should be done -+ * dynamically instead. -+ */ -+#define SBFLAG_PCI 0 -+#define SBFLAG_ENET0 1 -+#define SBFLAG_ILINE20 2 -+#define SBFLAG_CODEC 3 -+#define SBFLAG_USB 4 -+#define SBFLAG_EXTIF 5 -+#define SBFLAG_ENET1 6 -+ -+/* BCM95365 Local Bus devices */ -+#define BCM95365K_RESET_ADDR BCM5365_EXTIF -+#define BCM95365K_BOARDID_ADDR (BCM5365_EXTIF | 0x4000) -+#define BCM95365K_DOC_ADDR (BCM5365_EXTIF | 0x6000) -+#define BCM95365K_LED_ADDR (BCM5365_EXTIF | 0xc000) -+#define BCM95365K_TOD_REG_BASE (BCM95365K_NVRAM_ADDR | 0x1ff0) -+#define BCM95365K_NVRAM_ADDR (BCM5365_EXTIF | 0xe000) -+#define BCM95365K_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/ -+ -+/* Write to DLR2416 VFD Display character RAM */ -+#define LED_REG(x) \ -+ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x))) -+ -+#ifdef CONFIG_VSIM -+#define BCM5365_TRACE(trval) do { *((int *)0xa0002ff8) = (trval); \ -+ } while (0) -+#else -+#define BCM5365_TRACE(trval) do { *((unsigned char *)\ -+ KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \ -+ *((int *)0xa0002ff8) = (trval); } while (0) -+#endif -+ -+/* BCM9536R Local Bus devices */ -+#define BCM95365R_DOC_ADDR BCM5365_EXTIF -+ -+ -+ -+#endif /*!_S5_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h 2005-08-28 11:12:20.468853376 +0200 -@@ -0,0 +1,281 @@ -+/* -+ * SiliconBackplane Chipcommon core hardware definitions. -+ * -+ * The chipcommon core provides chip identification, SB control, -+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, -+ * gpio interface, extbus, and support for serial and parallel flashes. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _SBCHIPC_H -+#define _SBCHIPC_H -+ -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+typedef volatile struct { -+ uint32 chipid; /* 0x0 */ -+ uint32 capabilities; -+ uint32 corecontrol; /* corerev >= 1 */ -+ uint32 PAD[5]; -+ -+ /* Interrupt control */ -+ uint32 intstatus; /* 0x20 */ -+ uint32 intmask; -+ uint32 PAD[6]; -+ -+ /* serial flash interface registers */ -+ uint32 flashcontrol; /* 0x40 */ -+ uint32 flashaddress; -+ uint32 flashdata; -+ uint32 PAD[1]; -+ -+ /* Silicon backplane configuration broadcast control */ -+ uint32 broadcastaddress; -+ uint32 broadcastdata; -+ uint32 PAD[2]; -+ -+ /* gpio - cleared only by power-on-reset */ -+ uint32 gpioin; /* 0x60 */ -+ uint32 gpioout; -+ uint32 gpioouten; -+ uint32 gpiocontrol; -+ uint32 gpiointpolarity; -+ uint32 gpiointmask; -+ uint32 PAD[2]; -+ -+ /* Watchdog timer */ -+ uint32 watchdog; /* 0x80 */ -+ uint32 PAD[3]; -+ -+ /* clock control */ -+ uint32 clockcontrol_n; /* 0x90 */ -+ uint32 clockcontrol_sb; /* aka m0 */ -+ uint32 clockcontrol_pci; /* aka m1 */ -+ uint32 clockcontrol_m2; /* mii/uart/mipsref */ -+ uint32 clockcontrol_mips; /* aka m3 */ -+ uint32 uart_clkdiv; /* corerev >= 3 */ -+ uint32 PAD[2]; -+ -+ /* pll delay registers (corerev >= 4) */ -+ uint32 pll_on_delay; /* 0xb0 */ -+ uint32 fref_sel_delay; -+ uint32 slow_clk_ctl; -+ uint32 PAD[17]; -+ -+ /* ExtBus control registers (corerev >= 3) */ -+ uint32 cs01config; /* 0x100 */ -+ uint32 cs01memwaitcnt; -+ uint32 cs01attrwaitcnt; -+ uint32 cs01iowaitcnt; -+ uint32 cs23config; -+ uint32 cs23memwaitcnt; -+ uint32 cs23attrwaitcnt; -+ uint32 cs23iowaitcnt; -+ uint32 cs4config; -+ uint32 cs4waitcnt; -+ uint32 parallelflashconfig; -+ uint32 parallelflashwaitcnt; -+ uint32 PAD[116]; -+ -+ /* uarts */ -+ uint8 uart0data; /* 0x300 */ -+ uint8 uart0imr; -+ uint8 uart0fcr; -+ uint8 uart0lcr; -+ uint8 uart0mcr; -+ uint8 uart0lsr; -+ uint8 uart0msr; -+ uint8 uart0scratch; -+ uint8 PAD[248]; /* corerev >= 1 */ -+ -+ uint8 uart1data; /* 0x400 */ -+ uint8 uart1imr; -+ uint8 uart1fcr; -+ uint8 uart1lcr; -+ uint8 uart1mcr; -+ uint8 uart1lsr; -+ uint8 uart1msr; -+ uint8 uart1scratch; -+} chipcregs_t; -+ -+/* chipid */ -+#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ -+#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ -+#define CID_REV_SHIFT 16 /* Chip Revision shift */ -+#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ -+#define CID_PKG_SHIFT 20 /* Package Option shift */ -+#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ -+#define CID_CC_SHIFT 24 -+ -+/* capabilities */ -+#define CAP_UARTS_MASK 0x00000003 /* Number of uarts */ -+#define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ -+#define CAP_UCLKSEL 0x00000018 /* UARTs clock select */ -+#define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ -+#define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */ -+#define CAP_EXTBUS 0x00000040 /* External bus present */ -+#define CAP_FLASH_MASK 0x00000700 /* Type of flash */ -+#define CAP_PLL_MASK 0x00038000 /* Type of PLL */ -+#define CAP_PWR_CTL 0x00040000 /* Power control */ -+ -+/* PLL type */ -+#define PLL_NONE 0x00000000 -+#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */ -+#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */ -+#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */ -+#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */ -+ -+/* corecontrol */ -+#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ -+#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -+ -+/* intstatus/intmask */ -+#define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */ -+ -+/* slow_clk_ctl */ -+#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ -+#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ -+#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ -+#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ -+#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ -+#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ -+#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ -+#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ -+#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ -+#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ -+#define SCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */ -+#define SCC_CD_SHF 16 /* CLockDivider shift */ -+ -+/* clockcontrol_n */ -+#define CN_N1_MASK 0x3f /* n1 control */ -+#define CN_N2_MASK 0x3f00 /* n2 control */ -+#define CN_N2_SHIFT 8 -+ -+/* clockcontrol_sb/pci/uart */ -+#define CC_M1_MASK 0x3f /* m1 control */ -+#define CC_M2_MASK 0x3f00 /* m2 control */ -+#define CC_M2_SHIFT 8 -+#define CC_M3_MASK 0x3f0000 /* m3 control */ -+#define CC_M3_SHIFT 16 -+#define CC_MC_MASK 0x1f000000 /* mux control */ -+#define CC_MC_SHIFT 24 -+ -+/* N3M Clock control values for 125Mhz */ -+#define CC_125_N 0x0802 /* Default values for bcm4310 */ -+#define CC_125_M 0x04020009 -+#define CC_125_M25 0x11090009 -+#define CC_125_M33 0x11090005 -+ -+/* N3M Clock control magic field values */ -+#define CC_F6_2 0x02 /* A factor of 2 in */ -+#define CC_F6_3 0x03 /* 6-bit fields like */ -+#define CC_F6_4 0x05 /* N1, M1 or M3 */ -+#define CC_F6_5 0x09 -+#define CC_F6_6 0x11 -+#define CC_F6_7 0x21 -+ -+#define CC_F5_BIAS 5 /* 5-bit fields get this added */ -+ -+#define CC_MC_BYPASS 0x08 -+#define CC_MC_M1 0x04 -+#define CC_MC_M1M2 0x02 -+#define CC_MC_M1M2M3 0x01 -+#define CC_MC_M1M3 0x11 -+ -+/* Type 2 Clock control magic field values */ -+#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ -+#define CC_T2M2_BIAS 3 /* m2 bias */ -+ -+#define CC_T2MC_M1BYP 1 -+#define CC_T2MC_M2BYP 2 -+#define CC_T2MC_M3BYP 4 -+ -+/* Common clock base */ -+#define CC_CLOCK_BASE 24000000 /* Half the clock freq */ -+ -+/* Flash types in the chipcommon capabilities register */ -+#define FLASH_NONE 0x000 /* No flash */ -+#define SFLASH_ST 0x100 /* ST serial flash */ -+#define SFLASH_AT 0x200 /* Atmel serial flash */ -+#define PFLASH 0x700 /* Parallel flash */ -+ -+/* Bits in the config registers */ -+#define CC_CFG_EN 0x0001 /* Enable */ -+#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ -+#define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */ -+#define CC_CFG_EM_SYNC 0x0004 /* Synchronous */ -+#define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */ -+#define CC_CFG_EM_IDE 0x000a /* IDE */ -+#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ -+#define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */ -+#define CC_CFG_CE 0x0080 /* Sync: Clock enable */ -+#define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */ -+ -+/* Start/busy bit in flashcontrol */ -+#define SFLASH_START 0x80000000 -+#define SFLASH_BUSY SFLASH_START -+ -+/* flashcontrol opcodes for ST flashes */ -+#define SFLASH_ST_WREN 0x0006 /* Write Enable */ -+#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ -+#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ -+#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ -+#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ -+#define SFLASH_ST_PP 0x0302 /* Page Program */ -+#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ -+#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ -+#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ -+#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ -+ -+/* Status register bits for ST flashes */ -+#define SFLASH_ST_WIP 0x01 /* Write In Progress */ -+#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ -+#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ -+#define SFLASH_ST_BP_SHIFT 2 -+#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ -+ -+/* flashcontrol opcodes for Atmel flashes */ -+#define SFLASH_AT_READ 0x07e8 -+#define SFLASH_AT_PAGE_READ 0x07d2 -+#define SFLASH_AT_BUF1_READ -+#define SFLASH_AT_BUF2_READ -+#define SFLASH_AT_STATUS 0x01d7 -+#define SFLASH_AT_BUF1_WRITE 0x0384 -+#define SFLASH_AT_BUF2_WRITE 0x0387 -+#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 -+#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 -+#define SFLASH_AT_BUF1_PROGRAM 0x0288 -+#define SFLASH_AT_BUF2_PROGRAM 0x0289 -+#define SFLASH_AT_PAGE_ERASE 0x0281 -+#define SFLASH_AT_BLOCK_ERASE 0x0250 -+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 -+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 -+#define SFLASH_AT_BUF1_LOAD 0x0253 -+#define SFLASH_AT_BUF2_LOAD 0x0255 -+#define SFLASH_AT_BUF1_COMPARE 0x0260 -+#define SFLASH_AT_BUF2_COMPARE 0x0261 -+#define SFLASH_AT_BUF1_REPROGRAM 0x0258 -+#define SFLASH_AT_BUF2_REPROGRAM 0x0259 -+ -+/* Status register bits for Atmel flashes */ -+#define SFLASH_AT_READY 0x80 -+#define SFLASH_AT_MISMATCH 0x40 -+#define SFLASH_AT_ID_MASK 0x38 -+#define SFLASH_AT_ID_SHIFT 3 -+ -+#endif /* _SBCHIPC_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h 2005-08-28 11:12:20.469853224 +0200 -@@ -0,0 +1,296 @@ -+/* -+ * Broadcom SiliconBackplane hardware register definitions. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _SBCONFIG_H -+#define _SBCONFIG_H -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif -+ -+/* -+ * SiliconBackplane Address Map. -+ * All regions may not exist on all chips. -+ */ -+#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */ -+#define SB_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */ -+#define SB_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */ -+#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */ -+#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */ -+#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */ -+#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */ -+#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define SB_EUART (SB_EXTIF_BASE + 0x00800000) -+#define SB_LED (SB_EXTIF_BASE + 0x00900000) -+ -+/* enumeration space related defs */ -+#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */ -+#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE) -+#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ -+#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ -+ -+/* mips address */ -+#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ -+ -+/* -+ * Sonics Configuration Space Registers. -+ */ -+#ifdef _LANGUAGE_ASSEMBLY -+ -+#define SBIPSFLAG 0x08 -+#define SBTPSFLAG 0x18 -+#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ -+#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ -+#define SBADMATCH3 0x60 -+#define SBADMATCH2 0x68 -+#define SBADMATCH1 0x70 -+#define SBIMSTATE 0x90 -+#define SBINTVEC 0x94 -+#define SBTMSTATELOW 0x98 -+#define SBTMSTATEHIGH 0x9c -+#define SBBWA0 0xa0 -+#define SBIMCONFIGLOW 0xa8 -+#define SBIMCONFIGHIGH 0xac -+#define SBADMATCH0 0xb0 -+#define SBTMCONFIGLOW 0xb8 -+#define SBTMCONFIGHIGH 0xbc -+#define SBBCONFIG 0xc0 -+#define SBBSTATE 0xc8 -+#define SBACTCNFG 0xd8 -+#define SBFLAGST 0xe8 -+#define SBIDLOW 0xf8 -+#define SBIDHIGH 0xfc -+ -+ -+#else -+ -+typedef volatile struct _sbconfig { -+ uint32 PAD[2]; -+ uint32 sbipsflag; /* initiator port ocp slave flag */ -+ uint32 PAD[3]; -+ uint32 sbtpsflag; /* target port ocp slave flag */ -+ uint32 PAD[11]; -+ uint32 sbtmerrloga; /* (sonics >= 2.3) */ -+ uint32 PAD; -+ uint32 sbtmerrlog; /* (sonics >= 2.3) */ -+ uint32 PAD[3]; -+ uint32 sbadmatch3; /* address match3 */ -+ uint32 PAD; -+ uint32 sbadmatch2; /* address match2 */ -+ uint32 PAD; -+ uint32 sbadmatch1; /* address match1 */ -+ uint32 PAD[7]; -+ uint32 sbimstate; /* initiator agent state */ -+ uint32 sbintvec; /* interrupt mask */ -+ uint32 sbtmstatelow; /* target state */ -+ uint32 sbtmstatehigh; /* target state */ -+ uint32 sbbwa0; /* bandwidth allocation table0 */ -+ uint32 PAD; -+ uint32 sbimconfiglow; /* initiator configuration */ -+ uint32 sbimconfighigh; /* initiator configuration */ -+ uint32 sbadmatch0; /* address match0 */ -+ uint32 PAD; -+ uint32 sbtmconfiglow; /* target configuration */ -+ uint32 sbtmconfighigh; /* target configuration */ -+ uint32 sbbconfig; /* broadcast configuration */ -+ uint32 PAD; -+ uint32 sbbstate; /* broadcast state */ -+ uint32 PAD[3]; -+ uint32 sbactcnfg; /* activate configuration */ -+ uint32 PAD[3]; -+ uint32 sbflagst; /* current sbflags */ -+ uint32 PAD[3]; -+ uint32 sbidlow; /* identification */ -+ uint32 sbidhigh; /* identification */ -+} sbconfig_t; -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* sbipsflag */ -+#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ -+#define SBIPS_INT1_SHIFT 0 -+#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ -+#define SBIPS_INT2_SHIFT 8 -+#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ -+#define SBIPS_INT3_SHIFT 16 -+#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ -+#define SBIPS_INT4_SHIFT 24 -+ -+/* sbtpsflag */ -+#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ -+#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ -+ -+/* sbtmerrlog */ -+#define SBTMEL_CM 0x00000007 /* command */ -+#define SBTMEL_CI 0x0000ff00 /* connection id */ -+#define SBTMEL_EC 0x0f000000 /* error code */ -+#define SBTMEL_ME 0x80000000 /* multiple error */ -+ -+/* sbimstate */ -+#define SBIM_PC 0xf /* pipecount */ -+#define SBIM_AP_MASK 0x30 /* arbitration policy */ -+#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ -+#define SBIM_AP_TS 0x10 /* use timesliaces only */ -+#define SBIM_AP_TK 0x20 /* use token only */ -+#define SBIM_AP_RSV 0x30 /* reserved */ -+#define SBIM_IBE 0x20000 /* inbanderror */ -+#define SBIM_TO 0x40000 /* timeout */ -+#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ -+#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ -+ -+/* sbtmstatelow */ -+#define SBTML_RESET 0x1 /* reset */ -+#define SBTML_REJ 0x2 /* reject */ -+#define SBTML_CLK 0x10000 /* clock enable */ -+#define SBTML_FGC 0x20000 /* force gated clocks on */ -+#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */ -+#define SBTML_PE 0x40000000 /* pme enable */ -+#define SBTML_BE 0x80000000 /* bist enable */ -+ -+/* sbtmstatehigh */ -+#define SBTMH_SERR 0x1 /* serror */ -+#define SBTMH_INT 0x2 /* interrupt */ -+#define SBTMH_BUSY 0x4 /* busy */ -+#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */ -+#define SBTMH_FL_MASK 0x1fff0000 /* core-specific flags */ -+#define SBTMH_GCR 0x20000000 /* gated clock request */ -+#define SBTMH_BISTF 0x40000000 /* bist failed */ -+#define SBTMH_BISTD 0x80000000 /* bist done */ -+ -+/* sbbwa0 */ -+#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ -+#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ -+#define SBBWA_TAB1_SHIFT 16 -+ -+/* sbimconfiglow */ -+#define SBIMCL_STO_MASK 0x7 /* service timeout */ -+#define SBIMCL_RTO_MASK 0x70 /* request timeout */ -+#define SBIMCL_RTO_SHIFT 4 -+#define SBIMCL_CID_MASK 0xff0000 /* connection id */ -+#define SBIMCL_CID_SHIFT 16 -+ -+/* sbimconfighigh */ -+#define SBIMCH_IEM_MASK 0xc /* inband error mode */ -+#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ -+#define SBIMCH_TEM_SHIFT 4 -+#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ -+#define SBIMCH_BEM_SHIFT 6 -+ -+/* sbadmatch0 */ -+#define SBAM_TYPE_MASK 0x3 /* address type */ -+#define SBAM_AD64 0x4 /* reserved */ -+#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ -+#define SBAM_ADINT0_SHIFT 3 -+#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ -+#define SBAM_ADINT1_SHIFT 3 -+#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ -+#define SBAM_ADINT2_SHIFT 3 -+#define SBAM_ADEN 0x400 /* enable */ -+#define SBAM_ADNEG 0x800 /* negative decode */ -+#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ -+#define SBAM_BASE0_SHIFT 8 -+#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ -+#define SBAM_BASE1_SHIFT 12 -+#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ -+#define SBAM_BASE2_SHIFT 16 -+ -+/* sbtmconfiglow */ -+#define SBTMCL_CD_MASK 0xff /* clock divide */ -+#define SBTMCL_CO_MASK 0xf800 /* clock offset */ -+#define SBTMCL_CO_SHIFT 11 -+#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ -+#define SBTMCL_IF_SHIFT 18 -+#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ -+#define SBTMCL_IM_SHIFT 24 -+ -+/* sbtmconfighigh */ -+#define SBTMCH_BM_MASK 0x3 /* busy mode */ -+#define SBTMCH_RM_MASK 0x3 /* retry mode */ -+#define SBTMCH_RM_SHIFT 2 -+#define SBTMCH_SM_MASK 0x30 /* stop mode */ -+#define SBTMCH_SM_SHIFT 4 -+#define SBTMCH_EM_MASK 0x300 /* sb error mode */ -+#define SBTMCH_EM_SHIFT 8 -+#define SBTMCH_IM_MASK 0xc00 /* int mode */ -+#define SBTMCH_IM_SHIFT 10 -+ -+/* sbbconfig */ -+#define SBBC_LAT_MASK 0x3 /* sb latency */ -+#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ -+#define SBBC_MAX0_SHIFT 16 -+#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ -+#define SBBC_MAX1_SHIFT 20 -+ -+/* sbbstate */ -+#define SBBS_SRD 0x1 /* st reg disable */ -+#define SBBS_HRD 0x2 /* hold reg disable */ -+ -+/* sbidlow */ -+#define SBIDL_CS_MASK 0x3 /* config space */ -+#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ -+#define SBIDL_AR_SHIFT 3 -+#define SBIDL_SYNCH 0x40 /* sync */ -+#define SBIDL_INIT 0x80 /* initiator */ -+#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ -+#define SBIDL_MINLAT_SHIFT 8 -+#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ -+#define SBIDL_MAXLAT_SHIFT 12 -+#define SBIDL_FIRST 0x10000 /* this initiator is first */ -+#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ -+#define SBIDL_CW_SHIFT 18 -+#define SBIDL_TP_MASK 0xf00000 /* target ports */ -+#define SBIDL_TP_SHIFT 20 -+#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ -+#define SBIDL_IP_SHIFT 24 -+#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ -+#define SBIDL_RV_SHIFT 28 -+ -+/* sbidhigh */ -+#define SBIDH_RC_MASK 0xf /* revision code*/ -+#define SBIDH_CC_MASK 0xfff0 /* core code */ -+#define SBIDH_CC_SHIFT 4 -+#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ -+#define SBIDH_VC_SHIFT 16 -+ -+#define SB_COMMIT 0xfd8 /* update buffered registers value */ -+ -+/* vendor codes */ -+#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ -+ -+/* core codes */ -+#define SB_CC 0x800 /* chipcommon core */ -+#define SB_ILINE20 0x801 /* iline20 core */ -+#define SB_SDRAM 0x803 /* sdram core */ -+#define SB_PCI 0x804 /* pci core */ -+#define SB_MIPS 0x805 /* mips core */ -+#define SB_ENET 0x806 /* enet mac core */ -+#define SB_CODEC 0x807 /* v90 codec core */ -+#define SB_USB 0x808 /* usb 1.1 host/device core */ -+#define SB_ILINE100 0x80a /* iline100 core */ -+#define SB_IPSEC 0x80b /* ipsec core */ -+#define SB_PCMCIA 0x80d /* pcmcia core */ -+#define SB_MEMC 0x80f /* memc sdram core */ -+#define SB_EXTIF 0x811 /* external interface core */ -+#define SB_D11 0x812 /* 802.11 MAC core */ -+#define SB_MIPS33 0x816 /* mips3302 core */ -+#define SB_USB11H 0x817 /* usb 1.1 host core */ -+#define SB_USB11D 0x818 /* usb 1.1 device core */ -+#define SB_USB20H 0x819 /* usb 2.0 host core */ -+#define SB_USB20D 0x81A /* usb 2.0 device core */ -+#define SB_SDIOH 0x81B /* sdio host core */ -+#define SB_ROBO 0x81C /* robo switch core */ -+ -+#endif /* _SBCONFIG_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h 2005-08-28 11:12:20.470853072 +0200 -@@ -0,0 +1,242 @@ -+/* -+ * Hardware-specific External Interface I/O core definitions -+ * for the BCM47xx family of SiliconBackplane-based chips. -+ * -+ * The External Interface core supports a total of three external chip selects -+ * supporting external interfaces. One of the external chip selects is -+ * used for Flash, one is used for PCMCIA, and the other may be -+ * programmed to support either a synchronous interface or an -+ * asynchronous interface. The asynchronous interface can be used to -+ * support external devices such as UARTs and the BCM2019 Bluetooth -+ * baseband processor. -+ * The external interface core also contains 2 on-chip 16550 UARTs, clock -+ * frequency control, a watchdog interrupt timer, and a GPIO interface. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _SBEXTIF_H -+#define _SBEXTIF_H -+ -+/* external interface address space */ -+#define EXTIF_PCMCIA_MEMBASE(x) (x) -+#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) -+#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) -+#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) -+#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+/* -+ * The multiple instances of output and output enable registers -+ * are present to allow driver software for multiple cores to control -+ * gpio outputs without needing to share a single register pair. -+ */ -+struct gpiouser { -+ uint32 out; -+ uint32 outen; -+}; -+#define NGPIOUSER 5 -+ -+typedef volatile struct { -+ uint32 corecontrol; -+ uint32 extstatus; -+ uint32 PAD[2]; -+ -+ /* pcmcia control registers */ -+ uint32 pcmcia_config; -+ uint32 pcmcia_memwait; -+ uint32 pcmcia_attrwait; -+ uint32 pcmcia_iowait; -+ -+ /* programmable interface control registers */ -+ uint32 prog_config; -+ uint32 prog_waitcount; -+ -+ /* flash control registers */ -+ uint32 flash_config; -+ uint32 flash_waitcount; -+ uint32 PAD[4]; -+ -+ uint32 watchdog; -+ -+ /* clock control */ -+ uint32 clockcontrol_n; -+ uint32 clockcontrol_sb; -+ uint32 clockcontrol_pci; -+ uint32 clockcontrol_mii; -+ uint32 PAD[3]; -+ -+ /* gpio */ -+ uint32 gpioin; -+ struct gpiouser gpio[NGPIOUSER]; -+ uint32 PAD; -+ uint32 ejtagouten; -+ uint32 gpiointpolarity; -+ uint32 gpiointmask; -+ uint32 PAD[153]; -+ -+ uint8 uartdata; -+ uint8 PAD[3]; -+ uint8 uartimer; -+ uint8 PAD[3]; -+ uint8 uartfcr; -+ uint8 PAD[3]; -+ uint8 uartlcr; -+ uint8 PAD[3]; -+ uint8 uartmcr; -+ uint8 PAD[3]; -+ uint8 uartlsr; -+ uint8 PAD[3]; -+ uint8 uartmsr; -+ uint8 PAD[3]; -+ uint8 uartscratch; -+ uint8 PAD[3]; -+} extifregs_t; -+ -+/* corecontrol */ -+#define CC_UE (1 << 0) /* uart enable */ -+ -+/* extstatus */ -+#define ES_EM (1 << 0) /* endian mode (ro) */ -+#define ES_EI (1 << 1) /* external interrupt pin (ro) */ -+#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ -+ -+/* gpio bit mask */ -+#define GPIO_BIT0 (1 << 0) -+#define GPIO_BIT1 (1 << 1) -+#define GPIO_BIT2 (1 << 2) -+#define GPIO_BIT3 (1 << 3) -+#define GPIO_BIT4 (1 << 4) -+#define GPIO_BIT5 (1 << 5) -+#define GPIO_BIT6 (1 << 6) -+#define GPIO_BIT7 (1 << 7) -+ -+ -+/* pcmcia/prog/flash_config */ -+#define CF_EN (1 << 0) /* enable */ -+#define CF_EM_MASK 0xe /* mode */ -+#define CF_EM_SHIFT 1 -+#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ -+#define CF_EM_SYNC 0x2 /* synchronous mode */ -+#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ -+#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ -+#define CF_BS (1 << 5) /* byteswap */ -+#define CF_CD_MASK 0xc0 /* clock divider */ -+#define CF_CD_SHIFT 6 -+#define CF_CD_DIV2 0x0 /* backplane/2 */ -+#define CF_CD_DIV3 0x40 /* backplane/3 */ -+#define CF_CD_DIV4 0x80 /* backplane/4 */ -+#define CF_CE (1 << 8) /* clock enable */ -+#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ -+ -+/* pcmcia_memwait */ -+#define PM_W0_MASK 0x3f /* waitcount0 */ -+#define PM_W1_MASK 0x1f00 /* waitcount1 */ -+#define PM_W1_SHIFT 8 -+#define PM_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PM_W2_SHIFT 16 -+#define PM_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PM_W3_SHIFT 24 -+ -+/* pcmcia_attrwait */ -+#define PA_W0_MASK 0x3f /* waitcount0 */ -+#define PA_W1_MASK 0x1f00 /* waitcount1 */ -+#define PA_W1_SHIFT 8 -+#define PA_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PA_W2_SHIFT 16 -+#define PA_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PA_W3_SHIFT 24 -+ -+/* pcmcia_iowait */ -+#define PI_W0_MASK 0x3f /* waitcount0 */ -+#define PI_W1_MASK 0x1f00 /* waitcount1 */ -+#define PI_W1_SHIFT 8 -+#define PI_W2_MASK 0x1f0000 /* waitcount2 */ -+#define PI_W2_SHIFT 16 -+#define PI_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PI_W3_SHIFT 24 -+ -+/* prog_waitcount */ -+#define PW_W0_MASK 0x0000001f /* waitcount0 */ -+#define PW_W1_MASK 0x00001f00 /* waitcount1 */ -+#define PW_W1_SHIFT 8 -+#define PW_W2_MASK 0x001f0000 /* waitcount2 */ -+#define PW_W2_SHIFT 16 -+#define PW_W3_MASK 0x1f000000 /* waitcount3 */ -+#define PW_W3_SHIFT 24 -+ -+#define PW_W0 0x0000000c -+#define PW_W1 0x00000a00 -+#define PW_W2 0x00020000 -+#define PW_W3 0x01000000 -+ -+/* flash_waitcount */ -+#define FW_W0_MASK 0x1f /* waitcount0 */ -+#define FW_W1_MASK 0x1f00 /* waitcount1 */ -+#define FW_W1_SHIFT 8 -+#define FW_W2_MASK 0x1f0000 /* waitcount2 */ -+#define FW_W2_SHIFT 16 -+#define FW_W3_MASK 0x1f000000 /* waitcount3 */ -+#define FW_W3_SHIFT 24 -+ -+/* watchdog */ -+#define WATCHDOG_CLOCK 48000000 /* Hz */ -+ -+/* clockcontrol_n */ -+#define CN_N1_MASK 0x3f /* n1 control */ -+#define CN_N2_MASK 0x3f00 /* n2 control */ -+#define CN_N2_SHIFT 8 -+ -+/* clockcontrol_sb/pci/mii */ -+#define CC_M1_MASK 0x3f /* m1 control */ -+#define CC_M2_MASK 0x3f00 /* m2 control */ -+#define CC_M2_SHIFT 8 -+#define CC_M3_MASK 0x3f0000 /* m3 control */ -+#define CC_M3_SHIFT 16 -+#define CC_MC_MASK 0x1f000000 /* mux control */ -+#define CC_MC_SHIFT 24 -+ -+/* Clock control default values */ -+#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ -+#define CC_DEF_100 0x04020011 -+#define CC_DEF_33 0x11030011 -+#define CC_DEF_25 0x11050011 -+ -+/* Clock control values for 125Mhz */ -+#define CC_125_N 0x0802 -+#define CC_125_M 0x04020009 -+#define CC_125_M25 0x11090009 -+#define CC_125_M33 0x11090005 -+ -+/* Clock control magic field values */ -+#define CC_F6_2 0x02 /* A factor of 2 in */ -+#define CC_F6_3 0x03 /* 6-bit fields like */ -+#define CC_F6_4 0x05 /* N1, M1 or M3 */ -+#define CC_F6_5 0x09 -+#define CC_F6_6 0x11 -+#define CC_F6_7 0x21 -+ -+#define CC_F5_BIAS 5 /* 5-bit fields get this added */ -+ -+#define CC_MC_BYPASS 0x08 -+#define CC_MC_M1 0x04 -+#define CC_MC_M1M2 0x02 -+#define CC_MC_M1M2M3 0x01 -+#define CC_MC_M1M3 0x11 -+ -+#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ -+ -+#endif /* _SBEXTIF_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h 2005-08-28 11:12:20.471852920 +0200 -@@ -0,0 +1,144 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _SBMEMC_H -+#define _SBMEMC_H -+ -+#ifdef _LANGUAGE_ASSEMBLY -+ -+#define MEMC_CONTROL 0x00 -+#define MEMC_CONFIG 0x04 -+#define MEMC_REFRESH 0x08 -+#define MEMC_BISTSTAT 0x0c -+#define MEMC_MODEBUF 0x10 -+#define MEMC_BKCLS 0x14 -+#define MEMC_PRIORINV 0x18 -+#define MEMC_DRAMTIM 0x1c -+#define MEMC_INTSTAT 0x20 -+#define MEMC_INTMASK 0x24 -+#define MEMC_INTINFO 0x28 -+#define MEMC_NCDLCTL 0x30 -+#define MEMC_RDNCDLCOR 0x34 -+#define MEMC_WRNCDLCOR 0x38 -+#define MEMC_MISCDLYCTL 0x3c -+#define MEMC_DQSGATENCDL 0x40 -+#define MEMC_SPARE 0x44 -+#define MEMC_TPADDR 0x48 -+#define MEMC_TPDATA 0x4c -+#define MEMC_BARRIER 0x50 -+#define MEMC_CORE 0x54 -+ -+ -+#else -+ -+/* Sonics side: MEMC core registers */ -+typedef volatile struct sbmemcregs { -+ uint32 control; -+ uint32 config; -+ uint32 refresh; -+ uint32 biststat; -+ uint32 modebuf; -+ uint32 bkcls; -+ uint32 priorinv; -+ uint32 dramtim; -+ uint32 intstat; -+ uint32 intmask; -+ uint32 intinfo; -+ uint32 reserved1; -+ uint32 ncdlctl; -+ uint32 rdncdlcor; -+ uint32 wrncdlcor; -+ uint32 miscdlyctl; -+ uint32 dqsgatencdl; -+ uint32 spare; -+ uint32 tpaddr; -+ uint32 tpdata; -+ uint32 barrier; -+ uint32 core; -+} sbmemcregs_t; -+ -+#endif -+ -+/* MEMC Core Init values (OCP ID 0x80f) */ -+ -+/* For sdr: */ -+#define MEMC_SD_CONFIG_INIT 0x00048000 -+#define MEMC_SD_DRAMTIM_INIT 0x000754da -+#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 -+#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 -+#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ -+#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b -+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ -+#define MEMC_SD_CONTROL_INIT0 0x00000002 -+#define MEMC_SD_CONTROL_INIT1 0x00000008 -+#define MEMC_SD_CONTROL_INIT2 0x00000004 -+#define MEMC_SD_CONTROL_INIT3 0x00000010 -+#define MEMC_SD_CONTROL_INIT4 0x00000001 -+#define MEMC_SD_MODEBUF_INIT 0x00000000 -+#define MEMC_SD_REFRESH_INIT 0x0000840f -+ -+ -+/* This is for SDRM8X8X4 */ -+#define MEMC_SDR_INIT 0x0008 -+#define MEMC_SDR_MODE 0x32 -+#define MEMC_SDR_NCDL 0x00020032 -+#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ -+ -+/* For ddr: */ -+#define MEMC_CONFIG_INIT 0x00048000 -+#define MEMC_DRAMTIM_INIT 0x000754d9 -+#define MEMC_RDNCDLCOR_INIT 0x00000000 -+#define MEMC_WRNCDLCOR_INIT 0x49351200 -+#define MEMC_1_WRNCDLCOR_INIT 0x14500200 -+#define MEMC_DQSGATENCDL_INIT 0x00030000 -+#define MEMC_MISCDLYCTL_INIT 0x21061c1b -+#define MEMC_1_MISCDLYCTL_INIT 0x21021400 -+#define MEMC_NCDLCTL_INIT 0x00002001 -+#define MEMC_CONTROL_INIT0 0x00000002 -+#define MEMC_CONTROL_INIT1 0x00000008 -+#define MEMC_MODEBUF_INIT0 0x00004000 -+#define MEMC_CONTROL_INIT2 0x00000010 -+#define MEMC_MODEBUF_INIT1 0x00000100 -+#define MEMC_CONTROL_INIT3 0x00000010 -+#define MEMC_CONTROL_INIT4 0x00000008 -+#define MEMC_REFRESH_INIT 0x0000840f -+#define MEMC_CONTROL_INIT5 0x00000004 -+#define MEMC_MODEBUF_INIT2 0x00000000 -+#define MEMC_CONTROL_INIT6 0x00000010 -+#define MEMC_CONTROL_INIT7 0x00000001 -+ -+ -+/* This is for DDRM16X16X2 */ -+#define MEMC_DDR_INIT 0x0009 -+#define MEMC_DDR_MODE 0x62 -+#define MEMC_DDR_NCDL 0x0005050a -+#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ -+ -+/* mask for sdr/ddr calibration registers */ -+#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff -+#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff -+#define MEMC_DQSGATENCDL_G_MASK 0x000000ff -+ -+/* masks for miscdlyctl registers */ -+#define MEMC_MISC_SM_MASK 0x30000000 -+#define MEMC_MISC_SM_SHIFT 28 -+#define MEMC_MISC_SD_MASK 0x0f000000 -+#define MEMC_MISC_SD_SHIFT 24 -+ -+/* hw threshhold for calculating wr/rd for sdr memc */ -+#define MEMC_CD_THRESHOLD 128 -+ -+/* Low bit of init register says if memc is ddr or sdr */ -+#define MEMC_CONFIG_DDR 0x00000001 -+ -+#endif /* _SBMEMC_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h 2005-08-28 11:12:20.471852920 +0200 -@@ -0,0 +1,56 @@ -+/* -+ * Broadcom SiliconBackplane MIPS definitions -+ * -+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane -+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits -+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP -+ * interface. The core revision is stored in the SB ID register in SB -+ * configuration space. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _SBMIPS_H -+#define _SBMIPS_H -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+typedef volatile struct { -+ uint32 corecontrol; -+ uint32 PAD[2]; -+ uint32 biststatus; -+ uint32 PAD[4]; -+ uint32 intstatus; -+ uint32 intmask; -+ uint32 timer; -+} mipsregs_t; -+ -+extern uint32 sb_flag(void *sbh); -+extern uint sb_irq(void *sbh); -+ -+extern void sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); -+ -+extern void sb_mips_init(void *sbh); -+extern uint32 sb_mips_clock(void *sbh); -+extern bool sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); -+ -+extern uint32 sb_memc_get_ncdl(void *sbh); -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+#endif /* _SBMIPS_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h 2005-08-28 11:12:20.471852920 +0200 -@@ -0,0 +1,113 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. -+ * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ -+ -+#ifndef _SBPCI_H -+#define _SBPCI_H -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif -+ -+/* Sonics side: PCI core and host control registers */ -+typedef struct sbpciregs { -+ uint32 control; /* PCI control */ -+ uint32 PAD[3]; -+ uint32 arbcontrol; /* PCI arbiter control */ -+ uint32 PAD[3]; -+ uint32 intstatus; /* Interrupt status */ -+ uint32 intmask; /* Interrupt mask */ -+ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ -+ uint32 PAD[9]; -+ uint32 bcastaddr; /* Sonics broadcast address */ -+ uint32 bcastdata; /* Sonics broadcast data */ -+ uint32 PAD[2]; -+ uint32 gpioin; /* ro: gpio input (>=rev2) */ -+ uint32 gpioout; /* rw: gpio output (>=rev2) */ -+ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ -+ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ -+ uint32 PAD[36]; -+ uint32 sbtopci0; /* Sonics to PCI translation 0 */ -+ uint32 sbtopci1; /* Sonics to PCI translation 1 */ -+ uint32 sbtopci2; /* Sonics to PCI translation 2 */ -+ uint32 PAD[445]; -+ uint16 sprom[36]; /* SPROM shadow Area */ -+ uint32 PAD[46]; -+} sbpciregs_t; -+ -+/* PCI control */ -+#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ -+#define PCI_RST 0x02 /* Value driven out to pin */ -+#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ -+#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ -+ -+/* PCI arbiter control */ -+#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ -+#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ -+#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */ -+#define PCI_PARKID_SHIFT 1 -+#define PCI_PARKID_LAST 0 /* Last requestor */ -+#define PCI_PARKID_4710 1 /* 4710 */ -+#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */ -+#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */ -+ -+/* Interrupt status/mask */ -+#define PCI_INTA 0x01 /* PCI INTA# is asserted */ -+#define PCI_INTB 0x02 /* PCI INTB# is asserted */ -+#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ -+#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ -+#define PCI_PME 0x10 /* PCI PME# is asserted */ -+ -+/* (General) PCI/SB mailbox interrupts, two bits per pci function */ -+#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ -+#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ -+#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ -+#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ -+#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ -+#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ -+#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ -+#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ -+ -+/* Sonics broadcast address */ -+#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ -+ -+/* Sonics to PCI translation types */ -+#define SBTOPCI0_MASK 0xfc000000 -+#define SBTOPCI1_MASK 0xfc000000 -+#define SBTOPCI2_MASK 0xc0000000 -+#define SBTOPCI_MEM 0 -+#define SBTOPCI_IO 1 -+#define SBTOPCI_CFG0 2 -+#define SBTOPCI_CFG1 3 -+#define SBTOPCI_PREF 0x4 /* prefetch enable */ -+#define SBTOPCI_BURST 0x8 /* burst enable */ -+ -+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ -+#define cap_list rsvd_a[0] -+#define bar0_window dev_dep[0x80 - 0x40] -+#define bar1_window dev_dep[0x84 - 0x40] -+#define sprom_control dev_dep[0x88 - 0x40] -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); -+extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); -+extern void sbpci_ban(uint16 core); -+extern int sbpci_init(void *sbh); -+extern void sbpci_check(void *sbh); -+ -+#endif /* !_LANGUAGE_ASSEMBLY */ -+ -+#endif /* _SBPCI_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h 2005-08-28 11:12:20.472852768 +0200 -@@ -0,0 +1,131 @@ -+/* -+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions. -+ * -+ * $Id$ -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ */ -+ -+#ifndef _SBPCMCIA_H -+#define _SBPCMCIA_H -+ -+ -+/* All the addresses that are offsets in attribute space are divided -+ * by two to account for the fact that odd bytes are invalid in -+ * attribute space and our read/write routines make the space appear -+ * as if they didn't exist. Still we want to show the original numbers -+ * as documented in the hnd_pcmcia core manual. -+ */ -+ -+/* PCMCIA Function Configuration Registers */ -+#define PCMCIA_FCR (0x700 / 2) -+ -+#define FCR0_OFF 0 -+#define FCR1_OFF (0x40 / 2) -+#define FCR2_OFF (0x80 / 2) -+#define FCR3_OFF (0xc0 / 2) -+ -+#define PCMCIA_FCR0 (0x700 / 2) -+#define PCMCIA_FCR1 (0x740 / 2) -+#define PCMCIA_FCR2 (0x780 / 2) -+#define PCMCIA_FCR3 (0x7c0 / 2) -+ -+/* Standard PCMCIA FCR registers */ -+ -+#define PCMCIA_COR 0 -+ -+#define COR_RST 0x80 -+#define COR_LEV 0x40 -+#define COR_IRQEN 0x04 -+#define COR_BLREN 0x01 -+#define COR_FUNEN 0x01 -+ -+ -+#define PCICIA_FCSR (2 / 2) -+#define PCICIA_PRR (4 / 2) -+#define PCICIA_SCR (6 / 2) -+#define PCICIA_ESR (8 / 2) -+ -+ -+#define PCM_MEMOFF 0x0000 -+#define F0_MEMOFF 0x1000 -+#define F1_MEMOFF 0x2000 -+#define F2_MEMOFF 0x3000 -+#define F3_MEMOFF 0x4000 -+ -+/* Memory base in the function fcr's */ -+#define MEM_ADDR0 (0x728 / 2) -+#define MEM_ADDR1 (0x72a / 2) -+#define MEM_ADDR2 (0x72c / 2) -+ -+/* PCMCIA base plus Srom access in fcr0: */ -+#define PCMCIA_ADDR0 (0x072e / 2) -+#define PCMCIA_ADDR1 (0x0730 / 2) -+#define PCMCIA_ADDR2 (0x0732 / 2) -+ -+#define MEM_SEG (0x0734 / 2) -+#define SROM_CS (0x0736 / 2) -+#define SROM_DATAL (0x0738 / 2) -+#define SROM_DATAH (0x073a / 2) -+#define SROM_ADDRL (0x073c / 2) -+#define SROM_ADDRH (0x073e / 2) -+ -+/* Values for srom_cs: */ -+#define SROM_IDLE 0 -+#define SROM_WRITE 1 -+#define SROM_READ 2 -+#define SROM_WEN 4 -+#define SROM_WDS 7 -+#define SROM_DONE 8 -+ -+/* CIS stuff */ -+ -+/* The CIS stops where the FCRs start */ -+#define CIS_SIZE PCMCIA_FCR -+ -+/* Standard tuples we know about */ -+ -+#define CISTPL_MANFID 0x20 /* Manufacturer and device id */ -+#define CISTPL_FUNCE 0x22 /* Function extensions */ -+#define CISTPL_CFTABLE 0x1b /* Config table entry */ -+ -+/* Function extensions for LANs */ -+ -+#define LAN_TECH 1 /* Technology type */ -+#define LAN_SPEED 2 /* Raw bit rate */ -+#define LAN_MEDIA 3 /* Transmission media */ -+#define LAN_NID 4 /* Node identification (aka MAC addr) */ -+#define LAN_CONN 5 /* Connector standard */ -+ -+ -+/* CFTable */ -+#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */ -+#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */ -+#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */ -+ -+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll -+ * take one for HNBU, and use "extensions" (a la FUNCE) within it. -+ */ -+ -+#define CISTPL_BRCM_HNBU 0x80 -+ -+/* Subtypes of BRCM_HNBU: */ -+ -+#define HNBU_CHIPID 0x01 /* Six bytes with PCI vendor & -+ * device id and chiprev -+ */ -+#define HNBU_BOARDREV 0x02 /* Two bytes board revision */ -+#define HNBU_PAPARMS 0x03 /* Eleven bytes PA parameters */ -+#define HNBU_OEM 0x04 /* Eight bytes OEM data */ -+#define HNBU_CC 0x05 /* Default country code */ -+#define HNBU_AA 0x06 /* Antennas available */ -+#define HNBU_AG 0x07 /* Antenna gain */ -+#define HNBU_BOARDFLAGS 0x08 /* board flags */ -+#define HNBU_LED 0x09 /* LED set */ -+ -+#endif /* _SBPCMCIA_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h 2005-08-28 11:12:20.472852768 +0200 -@@ -0,0 +1,75 @@ -+/* -+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _SBSDRAM_H -+#define _SBSDRAM_H -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* Sonics side: SDRAM core registers */ -+typedef volatile struct sbsdramregs { -+ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ -+ uint32 config; /* Initializes external SDRAM mode register */ -+ uint32 refresh; /* Controls external SDRAM refresh rate */ -+ uint32 pad1; -+ uint32 pad2; -+} sbsdramregs_t; -+ -+#endif -+ -+/* SDRAM initialization control (initcontrol) register bits */ -+#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ -+#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ -+#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ -+#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ -+#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ -+#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ -+#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ -+#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ -+#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ -+#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ -+#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ -+#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ -+#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ -+ -+/* SDRAM configuration (config) register bits */ -+#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ -+#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ -+#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ -+#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ -+#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ -+#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ -+ -+/* SDRAM refresh control (refresh) register bits */ -+#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ -+#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ -+ -+/* SDRAM Core default Init values (OCP ID 0x803) */ -+#define SDRAM_INIT MEM4MX16X2 -+#define SDRAM_CONFIG SDRAM_BURSTFULL -+#define SDRAM_REFRESH SDRAM_REF(0x40) -+ -+#define MEM1MX16 0x009 /* 2 MB */ -+#define MEM1MX16X2 0x409 /* 4 MB */ -+#define MEM2MX8X2 0x809 /* 4 MB */ -+#define MEM2MX8X4 0xc09 /* 8 MB */ -+#define MEM2MX32 0x439 /* 8 MB */ -+#define MEM4MX16 0x019 /* 8 MB */ -+#define MEM4MX16X2 0x419 /* 16 MB */ -+#define MEM8MX8X2 0x819 /* 16 MB */ -+#define MEM8MX16 0x829 /* 16 MB */ -+#define MEM4MX32 0x429 /* 16 MB */ -+#define MEM8MX8X4 0xc19 /* 32 MB */ -+#define MEM8MX16X2 0xc29 /* 32 MB */ -+ -+#endif /* _SBSDRAM_H */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h 2005-08-28 11:12:20.473852616 +0200 -@@ -0,0 +1,90 @@ -+/* -+ * Misc utility routines for accessing chip-specific features -+ * of Broadcom HNBU SiliconBackplane-based chips. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _sbutils_h_ -+#define _sbutils_h_ -+ -+/* Board styles (bustype) */ -+#define BOARDSTYLE_SOC 0 /* Silicon Backplane */ -+#define BOARDSTYLE_PCI 1 /* PCI/MiniPCI board */ -+#define BOARDSTYLE_PCMCIA 2 /* PCMCIA board */ -+#define BOARDSTYLE_CARDBUS 3 /* Cardbus board */ -+ -+/* -+ * Many of the routines below take an 'sbh' handle as their first arg. -+ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). -+ * At any one time, the sbh is logically focused on one particular sb core -+ * (the "current core"). -+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. -+ */ -+ -+/* exported externs */ -+extern void *sb_attach(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); -+extern void *sb_kattach(void); -+extern void sb_detach(void *sbh); -+extern uint sb_chip(void *sbh); -+extern uint sb_chiprev(void *sbh); -+extern uint sb_chippkg(void *sbh); -+extern uint sb_boardvendor(void *sbh); -+extern uint sb_boardtype(void *sbh); -+extern uint sb_boardstyle(void *sbh); -+extern uint sb_bus(void *sbh); -+extern uint sb_corelist(void *sbh, uint coreid[]); -+extern uint sb_coreid(void *sbh); -+extern uint sb_coreidx(void *sbh); -+extern uint sb_coreunit(void *sbh); -+extern uint sb_corevendor(void *sbh); -+extern uint sb_corerev(void *sbh); -+extern void *sb_coreregs(void *sbh); -+extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val); -+extern bool sb_iscoreup(void *sbh); -+extern void *sb_setcoreidx(void *sbh, uint coreidx); -+extern void *sb_setcore(void *sbh, uint coreid, uint coreunit); -+extern void sb_commit(void *sbh); -+extern uint32 sb_base(uint32 admatch); -+extern uint32 sb_size(uint32 admatch); -+extern void sb_core_reset(void *sbh, uint32 bits); -+extern void sb_core_tofixup(void *sbh); -+extern void sb_core_disable(void *sbh, uint32 bits); -+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); -+extern uint32 sb_clock(void *sbh); -+extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask); -+extern void sb_pcmcia_init(void *sbh); -+extern void sb_watchdog(void *sbh, uint ticks); -+extern void *sb_gpiosetcore(void *sbh); -+extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpioin(void *sbh); -+extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val); -+extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val); -+extern bool sb_taclear(void *sbh); -+extern void sb_pwrctl_init(void *sbh); -+extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh); -+extern bool sb_pwrctl_clk(void *sbh, uint mode); -+extern int sb_pwrctl_xtal(void *sbh, uint what, bool on); -+extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg); -+ -+/* pwrctl xtal what flags */ -+#define XTAL 0x1 /* primary crystal oscillator (2050) */ -+#define PLL 0x2 /* main chip pll */ -+ -+/* pwrctl clk mode */ -+#define CLK_FAST 0 /* force fast (pll) clock */ -+#define CLK_SLOW 1 /* force slow clock */ -+#define CLK_DYNAMIC 2 /* enable dynamic power control */ -+ -+#endif /* _sbutils_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sflash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sflash.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sflash.h 2005-08-28 11:12:20.473852616 +0200 -@@ -0,0 +1,46 @@ -+/* -+ * Broadcom SiliconBackplane chipcommon serial flash interface -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _sflash_h_ -+#define _sflash_h_ -+ -+#include -+#include -+ -+/* GPIO based bank selection (1 GPIO bit) */ -+#define SFLASH_MAX_BANKS 1 -+#define SFLASH_GPIO_SHIFT 2 -+#define SFLASH_GPIO_MASK ((SFLASH_MAX_BANKS - 1) << SFLASH_GPIO_SHIFT) -+ -+struct sflash_bank { -+ uint offset; /* Byte offset */ -+ uint erasesize; /* Block size */ -+ uint numblocks; /* Number of blocks */ -+ uint size; /* Total bank size in bytes */ -+}; -+ -+struct sflash { -+ struct sflash_bank banks[SFLASH_MAX_BANKS]; /* GPIO selectable banks */ -+ uint32 type; /* Type */ -+ uint size; /* Total array size in bytes */ -+}; -+ -+/* Utility functions */ -+extern int sflash_poll(chipcregs_t *cc, uint offset); -+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); -+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); -+extern int sflash_erase(chipcregs_t *cc, uint offset); -+extern struct sflash * sflash_init(chipcregs_t *cc); -+ -+#endif /* _sflash_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h 2005-08-28 11:12:20.474852464 +0200 -@@ -0,0 +1,31 @@ -+/* -+ * TRX image file header format. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#include -+ -+#define TRX_MAGIC 0x30524448 /* "HDR0" */ -+#define TRX_VERSION 1 -+#define TRX_MAX_LEN 0x3A0000 -+#define TRX_NO_HEADER 1 /* Do not write TRX header */ -+ -+struct trx_header { -+ uint32 magic; /* "HDR0" */ -+ uint32 len; /* Length of file including header */ -+ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ -+ uint32 flag_version; /* 0:15 flags, 16:31 version */ -+ uint32 offsets[3]; /* Offsets of partitions from start of header */ -+}; -+ -+/* Compatibility */ -+typedef struct trx_header TRXHDR, *PTRXHDR; -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h 2005-08-28 11:12:20.474852464 +0200 -@@ -0,0 +1,162 @@ -+/* -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _TYPEDEFS_H_ -+#define _TYPEDEFS_H_ -+ -+/*----------------------- define TRUE, FALSE, NULL, bool ----------------*/ -+#ifdef __cplusplus -+ -+#ifndef FALSE -+#define FALSE false -+#endif -+#ifndef TRUE -+#define TRUE true -+#endif -+ -+#else /* !__cplusplus */ -+ -+#if defined(_WIN32) -+ -+typedef unsigned char bool; -+ -+#else -+ -+#if defined(MACOSX) && defined(KERNEL) -+#include -+#else -+typedef int bool; -+#endif -+ -+#endif -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+#ifndef TRUE -+#define TRUE 1 -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#endif -+ -+#endif /* __cplusplus */ -+ -+#ifndef OFF -+#define OFF 0 -+#endif -+ -+#ifndef ON -+#define ON 1 -+#endif -+ -+/*----------------------- define uchar, ushort, uint, ulong ----------------*/ -+ -+typedef unsigned char uchar; -+ -+#if defined(_WIN32) || defined(PMON) || defined(__MRC__) || defined(V2_HAL) || defined(_CFE_) -+ -+#ifndef V2_HAL -+typedef unsigned short ushort; -+#endif -+ -+typedef unsigned int uint; -+typedef unsigned long ulong; -+ -+#else -+ -+/* pick up ushort & uint from standard types.h */ -+#if defined(linux) && defined(__KERNEL__) -+#include /* sys/types.h and linux/types.h are oil and water */ -+#else -+#include -+#if !defined(TARGETENV_sun4) && !defined(linux) -+typedef unsigned long ulong; -+#endif /* TARGETENV_sun4 */ -+#endif -+#if defined(PMON) -+typedef unsigned int uint; -+typedef unsigned long long uint64; -+#endif -+ -+#endif /* WIN32 || PMON || .. */ -+ -+/*----------------------- define [u]int8/16/32/64 --------------------------*/ -+ -+ -+#ifdef V2_HAL -+#include -+#else -+typedef signed char int8; -+typedef signed short int16; -+typedef signed int int32; -+ -+typedef unsigned char uint8; -+typedef unsigned short uint16; -+typedef unsigned int uint32; -+#endif /* V2_HAL */ -+ -+typedef float float32; -+typedef double float64; -+ -+/* -+ * abstracted floating point type allows for compile time selection of -+ * single or double precision arithmetic. Compiling with -DFLOAT32 -+ * selects single precision; the default is double precision. -+ */ -+ -+#if defined(FLOAT32) -+typedef float32 float_t; -+#else /* default to double precision floating point */ -+typedef float64 float_t; -+#endif /* FLOAT32 */ -+ -+#ifdef _MSC_VER /* Microsoft C */ -+typedef signed __int64 int64; -+typedef unsigned __int64 uint64; -+ -+#elif defined(__GNUC__) && !defined(__STRICT_ANSI__) -+/* gcc understands signed/unsigned 64 bit types, but complains in ANSI mode */ -+typedef signed long long int64; -+typedef unsigned long long uint64; -+ -+#elif defined(__ICL) && !defined(__STDC__) -+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode */ -+typedef unsigned long long uint64; -+ -+#endif /* _MSC_VER */ -+ -+ -+/*----------------------- define PTRSZ, INLINE --------------------------*/ -+ -+#define PTRSZ sizeof (char*) -+ -+#ifndef INLINE -+ -+#ifdef _MSC_VER -+ -+#define INLINE __inline -+ -+#elif __GNUC__ -+ -+#define INLINE __inline__ -+ -+#else -+ -+#define INLINE -+ -+#endif /* _MSC_VER */ -+ -+#endif /* INLINE */ -+ -+#endif /* _TYPEDEFS_H_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h ---- linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h 2005-08-28 11:12:20.475852312 +0200 -@@ -0,0 +1,690 @@ -+/* -+ * Custom OID/ioctl definitions for -+ * Broadcom 802.11abg Networking Device Driver -+ * -+ * Definitions subject to change without notice. -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _wlioctl_h_ -+#define _wlioctl_h_ -+ -+#include -+#include -+#include -+ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#define PACKED -+#endif -+ -+/* -+ * Per-bss information structure. -+ */ -+ -+#define WL_NUMRATES 255 /* max # of rates in a rateset */ -+ -+typedef struct wl_rateset { -+ uint32 count; /* # rates in this set */ -+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -+} wl_rateset_t; -+ -+#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */ -+#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ -+ -+typedef struct wl_bss_info106 { -+ uint version; /* version field */ -+ struct ether_addr BSSID; -+ uint8 SSID_len; -+ uint8 SSID[32]; -+ uint8 Privacy; /* 0=No WEP, 1=Use WEP */ -+ int16 RSSI; /* receive signal strength (in dBm) */ -+ uint16 beacon_period; /* units are Kusec */ -+ uint16 atim_window; /* units are Kusec */ -+ uint8 channel; /* Channel no. */ -+ int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */ -+ struct { -+ uint count; /* # rates in this set */ -+ uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */ -+ } rateset; /* supported rates */ -+ uint8 dtim_period; /* DTIM period */ -+ int8 phy_noise; /* noise right after tx (in dBm) */ -+ uint16 capability; /* Capability information */ -+ struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */ -+ uint16 prb_len; /* probe response frame length (ioctl na) */ -+ struct { -+ uint8 supported; /* wpa supported */ -+ uint8 multicast; /* multicast cipher */ -+ uint8 ucount; /* count of unicast ciphers */ -+ uint8 unicast[4]; /* unicast ciphers */ -+ uint8 acount; /* count of auth modes */ -+ uint8 auth[4]; /* Authentication modes */ -+ } wpa; -+} wl_bss_info106_t; -+ -+typedef struct wl_bss_info { -+ uint32 version; /* version field */ -+ uint32 length; /* byte length of data in this record, starting at version and including IEs */ -+ struct ether_addr BSSID; -+ uint16 beacon_period; /* units are Kusec */ -+ uint16 capability; /* Capability information */ -+ uint8 SSID_len; -+ uint8 SSID[32]; -+ struct { -+ uint count; /* # rates in this set */ -+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ -+ } rateset; /* supported rates */ -+ uint8 channel; /* Channel no. */ -+ uint16 atim_window; /* units are Kusec */ -+ uint8 dtim_period; /* DTIM period */ -+ int16 RSSI; /* receive signal strength (in dBm) */ -+ int8 phy_noise; /* noise (in dBm) */ -+ uint32 ie_length; /* byte length of Information Elements */ -+ /* variable length Information Elements */ -+} wl_bss_info_t; -+ -+typedef struct wl_scan_results { -+ uint32 buflen; -+ uint32 version; -+ uint32 count; -+ wl_bss_info_t bss_info[1]; -+} wl_scan_results_t; -+/* size of wl_scan_results not including variable length array */ -+#define WL_SCAN_RESULTS_FIXED_SIZE 12 -+ -+/* uint32 list */ -+typedef struct wl_uint32_list { -+ /* in - # of elements, out - # of entries */ -+ uint32 count; -+ /* variable length uint32 list */ -+ uint32 element[1]; -+} wl_uint32_list_t; -+ -+typedef struct wlc_ssid { -+ uint32 SSID_len; -+ uchar SSID[32]; -+} wlc_ssid_t; -+ -+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ -+ -+typedef struct wl_channels_in_country { -+ uint32 buflen; -+ uint32 band; -+ char country_abbrev[WLC_CNTRY_BUF_SZ]; -+ uint32 count; -+ uint32 channel[1]; -+} wl_channels_in_country_t; -+ -+typedef struct wl_country_list { -+ uint32 buflen; -+ uint32 band_set; -+ uint32 band; -+ uint32 count; -+ char country_abbrev[1]; -+} wl_country_list_t; -+ -+ -+/* -+* Maximum # of keys that wl driver supports in S/W. Keys supported -+* in H/W is less than or equal to WSEC_MAX_KEYS. -+*/ -+#define WSEC_MAX_KEYS 54 /* Max # of keys (50 + 4 default keys) */ -+#define WSEC_MAX_DEFAULT_KEYS 4 /* # of default keys */ -+ -+/* -+* Remove these two defines if access to crypto/tkhash.h -+* is unconditionally permitted. -+*/ -+#define TKHASH_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */ -+#define TKHASH_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */ -+ -+/* Enumerate crypto algorithms */ -+#define CRYPTO_ALGO_OFF 0 -+#define CRYPTO_ALGO_WEP1 1 -+#define CRYPTO_ALGO_TKIP 2 -+#define CRYPTO_ALGO_WEP128 3 -+#define CRYPTO_ALGO_AES_CCM 4 -+#define CRYPTO_ALGO_AES_OCB_MSDU 5 -+#define CRYPTO_ALGO_AES_OCB_MPDU 6 -+#define CRYPTO_ALGO_NALG 7 -+ -+/* For use with wlc_wep_key.flags */ -+#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -+#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate MIC error */ -+#define WSEC_REPLAY_ERROR (1 << 3) /* Provoke deliberate replay */ -+ -+#define WSEC_GEN_MIC_ERROR 0x0001 -+#define WSEC_GEN_REPLAY 0x0002 -+ -+typedef struct tkip_info { -+ uint16 phase1[TKHASH_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */ -+ uint8 phase2[TKHASH_P2_KEY_SIZE]; /* tkhash phase2 result */ -+ uint32 micl; -+ uint32 micr; -+} tkip_info_t; -+ -+typedef struct wsec_iv { -+ uint32 hi; /* upper 32 bits of IV */ -+ uint16 lo; /* lower 16 bits of IV */ -+} wsec_iv_t; -+ -+typedef struct wsec_key { -+ uint32 index; /* key index */ -+ uint32 len; /* key length */ -+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ -+ tkip_info_t tkip_tx; /* tkip transmit state */ -+ tkip_info_t tkip_rx; /* tkip receive state */ -+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ -+ uint32 flags; /* misc flags */ -+ uint32 algo_hw; /* cache for hw register*/ -+ uint32 aes_mode; /* cache for hw register*/ -+ int iv_len; /* IV length */ -+ int iv_initialized; /* has IV been initialized already? */ -+ int icv_len; /* ICV length */ -+ wsec_iv_t rxiv; /* Rx IV */ -+ wsec_iv_t txiv; /* Tx IV */ -+ struct ether_addr ea; /* per station */ -+} wsec_key_t; -+ -+/* wireless security bitvec */ -+#define WEP_ENABLED 1 -+#define TKIP_ENABLED 2 -+#define AES_ENABLED 4 -+#define WSEC_SWFLAG 8 -+ -+#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG) -+#define WSEC_HW(wsec) (!WSEC_SW(wsec)) -+#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED) -+#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED) -+#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED) -+#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)) -+ -+/* wireless authentication bit vector */ -+#define WPA_ENABLED 1 -+#define PSK_ENABLED 2 -+ -+#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED) -+#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED) -+#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED)) -+ -+/* group/mcast cipher */ -+#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \ -+ ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \ -+ WPA_CIPHER_NONE) -+ -+typedef struct wl_led_info { -+ uint32 index; /* led index */ -+ uint32 behavior; -+ bool activehi; -+} wl_led_info_t; -+ -+/* -+ * definitions for driver messages passed from WL to NAS. -+ */ -+/* Use this to recognize wpa and 802.1x driver messages. */ -+static const uint8 wl_wpa_snap_template[] = -+ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c }; -+ -+#define WL_WPA_MSG_IFNAME_MAX 16 -+ -+/* WPA driver message */ -+typedef struct wl_wpa_header { -+ struct ether_header eth; -+ struct dot11_llc_snap_header snap; -+ uint8 version; -+ uint8 type; -+ /* version 2 additions */ -+ char ifname[WL_WPA_MSG_IFNAME_MAX]; -+ /* version specific data */ -+ /* uint8 data[1]; */ -+} wl_wpa_header_t PACKED; -+ -+#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) -+ -+/* WPA driver message ethertype - private between wlc and nas */ -+#define WL_WPA_ETHER_TYPE 0x9999 -+ -+/* WPA driver message current version */ -+#define WL_WPA_MSG_VERSION 2 -+ -+/* Type field values for the 802.2 driver messages for WPA. */ -+#define WLC_ASSOC_MSG 1 -+#define WLC_DISASSOC_MSG 2 -+#define WLC_PTK_MIC_MSG 3 -+#define WLC_GTK_MIC_MSG 4 -+ -+/* 802.1x driver message */ -+typedef struct wl_eapol_header { -+ struct ether_header eth; -+ struct dot11_llc_snap_header snap; -+ uint8 version; -+ uint8 reserved; -+ char ifname[WL_WPA_MSG_IFNAME_MAX]; -+ /* version specific data */ -+ /* uint8 802_1x_msg[1]; */ -+} wl_eapol_header_t PACKED; -+ -+#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX) -+ -+/* 802.1x driver message ethertype - private between wlc and nas */ -+#define WL_EAPOL_ETHER_TYPE 0x999A -+ -+/* 802.1x driver message current version */ -+#define WL_EAPOL_MSG_VERSION 1 -+ -+/* srom read/write struct passed through ioctl */ -+typedef struct { -+ uint byteoff; /* byte offset */ -+ uint nbytes; /* number of bytes */ -+ uint16 buf[1]; -+} srom_rw_t; -+ -+/* R_REG and W_REG struct passed through ioctl */ -+typedef struct { -+ uint32 byteoff; /* byte offset of the field in d11regs_t */ -+ uint32 val; /* read/write value of the field */ -+ uint32 size; /* sizeof the field */ -+} rw_reg_t; -+ -+/* Structure used by GET/SET_ATTEN ioctls */ -+typedef struct { -+ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ -+ uint16 bb; /* Baseband attenuation */ -+ uint16 radio; /* Radio attenuation */ -+ uint16 txctl1; /* Radio TX_CTL1 value */ -+} atten_t; -+ -+/* Used to get specific STA parameters */ -+typedef struct { -+ uint32 val; -+ struct ether_addr ea; -+} scb_val_t; -+ -+/* callback registration data types */ -+ -+typedef struct _mac_event_params { -+ uint msg; -+ struct ether_addr *addr; -+ uint result; -+ uint status; -+ uint auth_type; -+} mac_event_params_t; -+ -+typedef struct _mic_error_params { -+ struct ether_addr *ea; -+ bool group; -+ bool flush_txq; -+} mic_error_params_t; -+ -+typedef enum _wl_callback { -+ WL_MAC_EVENT_CALLBACK = 0, -+ WL_LINK_UP_CALLBACK, -+ WL_LINK_DOWN_CALLBACK, -+ WL_MIC_ERROR_CALLBACK, -+ WL_LAST_CALLBACK -+} wl_callback_t; -+ -+typedef struct _callback { -+ void (*fn)(void *, void *); -+ void *context; -+} callback_t; -+ -+typedef struct _scan_callback { -+ void (*fn)(void *); -+ void *context; -+} scan_callback_t; -+ -+/* used to register an arbitrary callback via the IOCTL interface */ -+typedef struct _set_callback { -+ int index; -+ callback_t callback; -+} set_callback_t; -+ -+/* -+ * Country locale determines which channels are available to us. -+ */ -+typedef enum _wlc_locale { -+ WLC_WW = 0, /* Worldwide */ -+ WLC_THA, /* Thailand */ -+ WLC_ISR, /* Israel */ -+ WLC_JDN, /* Jordan */ -+ WLC_PRC, /* China */ -+ WLC_JPN, /* Japan */ -+ WLC_FCC, /* USA */ -+ WLC_EUR, /* Europe */ -+ WLC_USL, /* US Low Band only */ -+ WLC_JPH, /* Japan High Band only */ -+ WLC_ALL, /* All the channels in this band */ -+ WLC_11D, /* Represents locale recieved by 11d beacons */ -+ WLC_LAST_LOCALE, -+ WLC_UNDEFINED_LOCALE = 0xf -+} wlc_locale_t; -+ -+/* channel encoding */ -+typedef struct channel_info { -+ int hw_channel; -+ int target_channel; -+ int scan_channel; -+} channel_info_t; -+ -+/* For ioctls that take a list of MAC addresses */ -+struct maclist { -+ uint count; /* number of MAC addresses */ -+ struct ether_addr ea[1]; /* variable length array of MAC addresses */ -+}; -+ -+/* get pkt count struct passed through ioctl */ -+typedef struct get_pktcnt { -+ uint rx_good_pkt; -+ uint rx_bad_pkt; -+ uint tx_good_pkt; -+ uint tx_bad_pkt; -+} get_pktcnt_t; -+ -+/* Linux network driver ioctl encoding */ -+typedef struct wl_ioctl { -+ int cmd; /* common ioctl definition */ -+ void *buf; /* pointer to user buffer */ -+ int len; /* length of user buffer */ -+} wl_ioctl_t; -+ -+/* -+ * Structure for passing hardware and software -+ * revision info up from the driver. -+ */ -+typedef struct wlc_rev_info { -+ uint vendorid; /* PCI vendor id */ -+ uint deviceid; /* device id of chip */ -+ uint radiorev; /* radio revision */ -+ uint chiprev; /* chip revision */ -+ uint corerev; /* core revision */ -+ uint boardid; /* board identifier (usu. PCI sub-device id) */ -+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ -+ uint boardrev; /* board revision */ -+ uint driverrev; /* driver version */ -+ uint ucoderev; /* microcode version */ -+ uint bus; /* bus type */ -+ uint chipnum; /* chip number */ -+} wlc_rev_info_t; -+ -+/* check this magic number */ -+#define WLC_IOCTL_MAGIC 0x14e46c77 -+ -+/* bump this number if you change the ioctl interface */ -+#define WLC_IOCTL_VERSION 1 -+ -+/* maximum length buffer required */ -+#define WLC_IOCTL_MAXLEN 8192 -+ -+/* common ioctl definitions */ -+#define WLC_GET_MAGIC 0 -+#define WLC_GET_VERSION 1 -+#define WLC_UP 2 -+#define WLC_DOWN 3 -+#define WLC_DUMP 6 -+#define WLC_GET_MSGLEVEL 7 -+#define WLC_SET_MSGLEVEL 8 -+#define WLC_GET_PROMISC 9 -+#define WLC_SET_PROMISC 10 -+#define WLC_GET_RATE 12 -+#define WLC_SET_RATE 13 -+#define WLC_GET_INSTANCE 14 -+#define WLC_GET_FRAG 15 -+#define WLC_SET_FRAG 16 -+#define WLC_GET_RTS 17 -+#define WLC_SET_RTS 18 -+#define WLC_GET_INFRA 19 -+#define WLC_SET_INFRA 20 -+#define WLC_GET_AUTH 21 -+#define WLC_SET_AUTH 22 -+#define WLC_GET_BSSID 23 -+#define WLC_SET_BSSID 24 -+#define WLC_GET_SSID 25 -+#define WLC_SET_SSID 26 -+#define WLC_RESTART 27 -+#define WLC_GET_CHANNEL 29 -+#define WLC_SET_CHANNEL 30 -+#define WLC_GET_SRL 31 -+#define WLC_SET_SRL 32 -+#define WLC_GET_LRL 33 -+#define WLC_SET_LRL 34 -+#define WLC_GET_PLCPHDR 35 -+#define WLC_SET_PLCPHDR 36 -+#define WLC_GET_RADIO 37 -+#define WLC_SET_RADIO 38 -+#define WLC_GET_PHYTYPE 39 -+#define WLC_GET_WEP 42 -+#define WLC_SET_WEP 43 -+#define WLC_GET_KEY 44 -+#define WLC_SET_KEY 45 -+#define WLC_SCAN 50 -+#define WLC_SCAN_RESULTS 51 -+#define WLC_DISASSOC 52 -+#define WLC_REASSOC 53 -+#define WLC_GET_ROAM_TRIGGER 54 -+#define WLC_SET_ROAM_TRIGGER 55 -+#define WLC_GET_TXANT 61 -+#define WLC_SET_TXANT 62 -+#define WLC_GET_ANTDIV 63 -+#define WLC_SET_ANTDIV 64 -+#define WLC_GET_TXPWR 65 -+#define WLC_SET_TXPWR 66 -+#define WLC_GET_CLOSED 67 -+#define WLC_SET_CLOSED 68 -+#define WLC_GET_MACLIST 69 -+#define WLC_SET_MACLIST 70 -+#define WLC_GET_RATESET 71 -+#define WLC_SET_RATESET 72 -+#define WLC_GET_LOCALE 73 -+#define WLC_SET_LOCALE 74 -+#define WLC_GET_BCNPRD 75 -+#define WLC_SET_BCNPRD 76 -+#define WLC_GET_DTIMPRD 77 -+#define WLC_SET_DTIMPRD 78 -+#define WLC_GET_SROM 79 -+#define WLC_SET_SROM 80 -+#define WLC_GET_WEP_RESTRICT 81 -+#define WLC_SET_WEP_RESTRICT 82 -+#define WLC_GET_COUNTRY 83 -+#define WLC_SET_COUNTRY 84 -+#define WLC_GET_REVINFO 98 -+#define WLC_GET_MACMODE 105 -+#define WLC_SET_MACMODE 106 -+#define WLC_GET_GMODE 109 -+#define WLC_SET_GMODE 110 -+#define WLC_GET_CURR_RATESET 114 /* current rateset */ -+#define WLC_GET_SCANSUPPRESS 115 -+#define WLC_SET_SCANSUPPRESS 116 -+#define WLC_GET_AP 117 -+#define WLC_SET_AP 118 -+#define WLC_GET_EAP_RESTRICT 119 -+#define WLC_SET_EAP_RESTRICT 120 -+#define WLC_GET_WDSLIST 123 -+#define WLC_SET_WDSLIST 124 -+#define WLC_GET_RSSI 127 -+#define WLC_GET_WSEC 133 -+#define WLC_SET_WSEC 134 -+#define WLC_GET_BSS_INFO 136 -+#define WLC_GET_LAZYWDS 138 -+#define WLC_SET_LAZYWDS 139 -+#define WLC_GET_BANDLIST 140 -+#define WLC_GET_BAND 141 -+#define WLC_SET_BAND 142 -+#define WLC_GET_SHORTSLOT 144 -+#define WLC_GET_SHORTSLOT_OVERRIDE 145 -+#define WLC_SET_SHORTSLOT_OVERRIDE 146 -+#define WLC_GET_SHORTSLOT_RESTRICT 147 -+#define WLC_SET_SHORTSLOT_RESTRICT 148 -+#define WLC_GET_GMODE_PROTECTION 149 -+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -+#define WLC_UPGRADE 152 -+#define WLC_GET_ASSOCLIST 159 -+#define WLC_GET_CLK 160 -+#define WLC_SET_CLK 161 -+#define WLC_GET_UP 162 -+#define WLC_OUT 163 -+#define WLC_GET_WPA_AUTH 164 -+#define WLC_SET_WPA_AUTH 165 -+#define WLC_GET_GMODE_PROTECTION_CONTROL 178 -+#define WLC_SET_GMODE_PROTECTION_CONTROL 179 -+#define WLC_GET_PHYLIST 180 -+#define WLC_GET_GMODE_PROTECTION_CTS 198 -+#define WLC_SET_GMODE_PROTECTION_CTS 199 -+#define WLC_GET_PIOMODE 203 -+#define WLC_SET_PIOMODE 204 -+#define WLC_SET_LED 209 -+#define WLC_GET_LED 210 -+#define WLC_GET_CHANNEL_SEL 215 -+#define WLC_START_CHANNEL_SEL 216 -+#define WLC_GET_VALID_CHANNELS 217 -+#define WLC_GET_FAKEFRAG 218 -+#define WLC_SET_FAKEFRAG 219 -+#define WLC_GET_WET 230 -+#define WLC_SET_WET 231 -+#define WLC_GET_KEY_PRIMARY 235 -+#define WLC_SET_KEY_PRIMARY 236 -+#define WLC_SCAN_WITH_CALLBACK 240 -+#define WLC_SET_CS_SCAN_TIMER 248 -+#define WLC_GET_CS_SCAN_TIMER 249 -+#define WLC_CURRENT_PWR 256 -+#define WLC_GET_CHANNELS_IN_COUNTRY 260 -+#define WLC_GET_COUNTRY_LIST 261 -+#define WLC_NVRAM_GET 264 -+#define WLC_NVRAM_SET 265 -+#define WLC_LAST 271 /* bump after adding */ -+ -+/* -+ * Minor kludge alert: -+ * Duplicate a few definitions that irelay requires from epiioctl.h here -+ * so caller doesn't have to include this file and epiioctl.h . -+ * If this grows any more, it would be time to move these irelay-specific -+ * definitions out of the epiioctl.h and into a separate driver common file. -+ */ -+#ifndef EPICTRL_COOKIE -+#define EPICTRL_COOKIE 0xABADCEDE -+#endif -+ -+/* vx wlc ioctl's offset */ -+#define CMN_IOCTL_OFF 0x180 -+ -+/* -+ * custom OID support -+ * -+ * 0xFF - implementation specific OID -+ * 0xE4 - first byte of Broadcom PCI vendor ID -+ * 0x14 - second byte of Broadcom PCI vendor ID -+ * 0xXX - the custom OID number -+ */ -+ -+/* begin 0x1f values beyond the start of the ET driver range. */ -+#define WL_OID_BASE 0xFFE41420 -+ -+/* NDIS overrides */ -+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) -+ -+#define WL_DECRYPT_STATUS_SUCCESS 1 -+#define WL_DECRYPT_STATUS_FAILURE 2 -+#define WL_DECRYPT_STATUS_UNKNOWN 3 -+ -+/* allows user-mode app to poll the status of USB image upgrade */ -+#define WLC_UPGRADE_SUCCESS 0 -+#define WLC_UPGRADE_PENDING 1 -+ -+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -+#define WL_RADIO_SW_DISABLE (1<<0) -+#define WL_RADIO_HW_DISABLE (1<<1) -+ -+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -+#define WL_TXPWR_OVERRIDE (1<<31) -+ -+ -+/* Bus types */ -+#define WL_SB_BUS 0 /* Silicon Backplane */ -+#define WL_PCI_BUS 1 /* PCI target */ -+#define WL_PCMCIA_BUS 2 /* PCMCIA target */ -+ -+/* band types */ -+#define WLC_BAND_AUTO 0 /* auto-select */ -+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ -+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ -+ -+/* MAC list modes */ -+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ -+ -+/* -+ * -+ */ -+#define GMODE_LEGACY_B 0 -+#define GMODE_AUTO 1 -+#define GMODE_ONLY 2 -+#define GMODE_B_DEFERRED 3 -+#define GMODE_PERFORMANCE 4 -+#define GMODE_LRS 5 -+#define GMODE_MAX 6 -+ -+/* values for PLCPHdr_override */ -+#define WLC_PLCP_AUTO -1 -+#define WLC_PLCP_SHORT 0 -+#define WLC_PLCP_LONG 1 -+ -+/* values for g_protection_override */ -+#define WLC_G_PROTECTION_AUTO -1 -+#define WLC_G_PROTECTION_OFF 0 -+#define WLC_G_PROTECTION_ON 1 -+ -+/* values for g_protection_control */ -+#define WLC_G_PROTECTION_CTL_OFF 0 -+#define WLC_G_PROTECTION_CTL_LOCAL 1 -+#define WLC_G_PROTECTION_CTL_OVERLAP 2 -+ -+ -+ -+ -+ -+ -+/* max # of leds supported by GPIO (gpio pin# == led index#) */ -+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ -+ -+/* led per-pin behaviors */ -+#define WL_LED_OFF 0 /* always off */ -+#define WL_LED_ON 1 /* always on */ -+#define WL_LED_ACTIVITY 2 /* activity */ -+#define WL_LED_RADIO 3 /* radio enabled */ -+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -+#define WL_LED_WI1 7 -+#define WL_LED_WI2 8 -+#define WL_LED_WI3 9 -+#define WL_LED_ASSOC 10 /* associated state indicator */ -+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -+#define WL_LED_NUMBEHAVIOR 12 -+ -+/* led behavior numeric value format */ -+#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ -+ -+ -+/* rate check */ -+#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \ -+ ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \ -+ ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \ -+ ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108) -+ -+ -+#undef PACKED -+ -+#endif /* _wlioctl_h_ */ -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S ---- linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S 2005-08-28 16:58:08.027788792 +0200 -@@ -0,0 +1,48 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ -+ NESTED(bcm47xx_irq_handler, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ -+ .set at -+ .set noreorder -+ -+ jal bcm47xx_irq_dispatch -+ move a0, sp -+ -+ j ret_from_irq -+ nop -+ -+ END(bcm47xx_irq_handler) -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/irq.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c ---- linux-2.6.12.5/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c 2005-08-28 16:58:26.178029536 +0200 -@@ -0,0 +1,68 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+extern asmlinkage void bcm47xx_irq_handler(void); -+ -+void bcm47xx_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; -+ -+ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; -+ -+ clear_c0_status(cause); -+ -+ if (cause & CAUSEF_IP7) -+ do_IRQ(7, regs); -+ if (cause & CAUSEF_IP2) -+ do_IRQ(2, regs); -+ if (cause & CAUSEF_IP3) -+ do_IRQ(3, regs); -+ if (cause & CAUSEF_IP4) -+ do_IRQ(4, regs); -+ if (cause & CAUSEF_IP5) -+ do_IRQ(5, regs); -+ if (cause & CAUSEF_IP6) -+ do_IRQ(6, regs); -+} -+ -+void __init arch_init_irq(void) -+{ -+ set_except_vector(0, bcm47xx_irq_handler); -+ mips_cpu_irq_init(0); -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/prom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c ---- linux-2.6.12.5/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c 2005-08-28 16:58:41.789656208 +0200 -@@ -0,0 +1,59 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+const char *get_system_type(void) -+{ -+ return "Broadcom BCM47xx"; -+} -+ -+void __init prom_init(void) -+{ -+ unsigned long mem; -+ -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM47XX; -+ -+ /* Figure out memory size by finding aliases */ -+ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { -+ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == -+ *(unsigned long *)(prom_init)) -+ break; -+ } -+ -+ add_memory_region(0, mem, BOOT_MEM_RAM); -+} -+ -+unsigned long __init prom_free_prom_memory(void) -+{ -+ return 0; -+} -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/setup.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c ---- linux-2.6.12.5/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c 2005-08-28 16:57:28.317825624 +0200 -@@ -0,0 +1,127 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if 1 -+ -+#define SER_PORT1(reg) (*((volatile unsigned char *)(0xb8000400+reg))) -+ -+int putDebugChar(char c) -+{ -+ while (!(SER_PORT1(UART_LSR) & UART_LSR_THRE)); -+ SER_PORT1(UART_TX) = c; -+ -+ return 1; -+} -+ -+char getDebugChar(void) -+{ -+ while (!(SER_PORT1(UART_LSR) & 1)); -+ return SER_PORT1(UART_RX); -+} -+ -+ -+static int ser_line = 0; -+ -+static void -+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) -+{ -+ struct uart_port s; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ s.line = ser_line++; -+ s.membase = regs; -+ s.irq = irq + 2; -+ s.uartclk = baud_base; -+ s.flags = ASYNC_BOOT_AUTOCONF; -+ s.iotype = SERIAL_IO_MEM; -+ s.regshift = reg_shift; -+ -+ if (early_serial_setup(&s) != 0) { -+ printk(KERN_ERR "Serial setup failed!\n"); -+ } -+} -+#endif -+ -+extern void bcm47xx_time_init(void); -+extern void bcm47xx_timer_setup(struct irqaction *irq); -+ -+void *nvram_get(char *foo) -+{ -+ return NULL; -+} -+ -+void *sbh; -+ -+static void bcm47xx_machine_restart(char *command) -+{ -+ /* Set the watchdog timer to reset immediately */ -+ cli(); -+ sb_watchdog(sbh, 1); -+ while (1); -+} -+ -+static void bcm47xx_machine_halt(void) -+{ -+ /* Disable interrupts and watchdog and spin forever */ -+ cli(); -+ sb_watchdog(sbh, 0); -+ while (1); -+} -+ -+static int __init bcm47xx_init(void) -+{ -+ -+ sbh = sb_kattach(); -+ sb_mips_init(sbh); -+ sbpci_init(sbh); -+ sb_serial_init(sbh, serial_add); -+ -+ _machine_restart = bcm47xx_machine_restart; -+ _machine_halt = bcm47xx_machine_halt; -+ _machine_power_off = bcm47xx_machine_halt; -+ -+ board_time_init = bcm47xx_time_init; -+ board_timer_setup = bcm47xx_timer_setup; -+ -+ return 0; -+} -+ -+early_initcall(bcm47xx_init); -diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/time.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c ---- linux-2.6.12.5/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c 2005-08-28 16:57:55.440702320 +0200 -@@ -0,0 +1,59 @@ -+/* -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+void __init -+bcm47xx_time_init(void) -+{ -+ unsigned int hz; -+ -+ /* -+ * Use deterministic values for initial counter interrupt -+ * so that calibrate delay avoids encountering a counter wrap. -+ */ -+ write_c0_count(0); -+ write_c0_compare(0xffff); -+ -+ hz = 200 * 1000 * 1000; -+ -+ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ -+ mips_hpt_frequency = hz / 2; -+ -+} -+ -+void __init -+bcm47xx_timer_setup(struct irqaction *irq) -+{ -+ /* Enable the timer interrupt */ -+ setup_irq(7, irq); -+} -diff -Nur linux-2.6.12.5/arch/mips/kernel/cpu-probe.c linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c ---- linux-2.6.12.5/arch/mips/kernel/cpu-probe.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c 2005-08-28 11:12:20.538842736 +0200 -@@ -555,6 +555,28 @@ - } - } - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_BCM3302: -+ c->cputype = CPU_BCM3302; -+ c->isa_level = MIPS_CPU_ISA_M32; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ break; -+ case PRID_IMP_BCM4710: -+ c->cputype = CPU_BCM4710; -+ c->isa_level = MIPS_CPU_ISA_M32; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - __init void cpu_probe(void) - { - struct cpuinfo_mips *c = ¤t_cpu_data; -@@ -577,7 +599,9 @@ - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; -- -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_SANDCRAFT: - cpu_probe_sandcraft(c); - break; -diff -Nur linux-2.6.12.5/arch/mips/kernel/head.S linux-2.6.12.5-brcm/arch/mips/kernel/head.S ---- linux-2.6.12.5/arch/mips/kernel/head.S 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/kernel/head.S 2005-08-28 11:12:20.539842584 +0200 -@@ -122,6 +122,14 @@ - #endif - .endm - -+#ifdef CONFIG_BCM4710 -+#undef eret -+#define eret nop; nop; eret -+#endif -+ -+ j kernel_entry -+ nop -+ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. -diff -Nur linux-2.6.12.5/arch/mips/kernel/proc.c linux-2.6.12.5-brcm/arch/mips/kernel/proc.c ---- linux-2.6.12.5/arch/mips/kernel/proc.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/kernel/proc.c 2005-08-28 11:12:20.553840456 +0200 -@@ -75,7 +75,9 @@ - [CPU_VR4133] "NEC VR4133", - [CPU_VR4181] "NEC VR4181", - [CPU_VR4181A] "NEC VR4181A", -- [CPU_SR71000] "Sandcraft SR71000" -+ [CPU_SR71000] "Sandcraft SR71000", -+ [CPU_BCM3302] "Broadcom BCM3302", -+ [CPU_BCM4710] "Broadcom BCM4710" - }; - - -diff -Nur linux-2.6.12.5/arch/mips/mm/tlbex.c linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c ---- linux-2.6.12.5/arch/mips/mm/tlbex.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c 2005-08-28 11:12:20.587835288 +0200 -@@ -851,6 +851,8 @@ - case CPU_4KSC: - case CPU_20KC: - case CPU_25KF: -+ case CPU_BCM3302: -+ case CPU_BCM4710: - tlbw(p); - break; - -diff -Nur linux-2.6.12.5/arch/mips/pci/Makefile linux-2.6.12.5-brcm/arch/mips/pci/Makefile ---- linux-2.6.12.5/arch/mips/pci/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/pci/Makefile 2005-08-28 16:41:44.565297816 +0200 -@@ -18,6 +18,7 @@ - obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o - obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o - obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o -+obj-$(CONFIG_BCM947XX) += ops-sb.o fixup-bcm47xx.o pci-bcm47xx.o - - # - # These are still pretty much in the old state, watch, go blind. -diff -Nur linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c ---- linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c 2005-08-28 11:12:20.611831640 +0200 -@@ -0,0 +1,23 @@ -+#include -+#include -+ -+/* Do platform specific device initialization at pci_enable_device() time */ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ return 0; -+} -+ -+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ u8 irq; -+ -+ if (dev->bus->number == 1) -+ return 2; -+ -+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); -+ return irq + 2; -+} -+ -+struct pci_fixup pcibios_fixups[] __initdata = { -+ { 0 } -+}; -diff -Nur linux-2.6.12.5/arch/mips/pci/ops-sb.c linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c ---- linux-2.6.12.5/arch/mips/pci/ops-sb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c 2005-08-28 11:12:20.612831488 +0200 -@@ -0,0 +1,44 @@ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+extern void *sbh; -+//extern spinlock_t bcm47xx_sbh_lock; -+ -+static int -+sb_pci_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ //unsigned long flags; -+ int ret; -+ -+ -+ //spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size); -+ //spin_unlock_irqrestore(&sbh_lock, flags); -+ -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int -+sb_pci_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+// unsigned long flags; -+ int ret; -+ -+// spin_lock_irqsave(&sbh_lock, flags); -+ ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size); -+// spin_unlock_irqrestore(&sbh_lock, flags); -+ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+struct pci_ops sb_pci_ops = { -+ .read = sb_pci_read_config, -+ .write = sb_pci_write_config, -+}; -diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c ---- linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c 2005-08-28 11:12:20.612831488 +0200 -@@ -0,0 +1,61 @@ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+ -+extern struct pci_ops sb_pci_ops; -+ -+static struct resource sb_pci_mem_resource = { -+ .name = "SB PCI Memory resources", -+ .start = SB_ENUM_BASE, -+ .end = SB_ENUM_LIM - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource sb_pci_io_resource = { -+ .name = "SB PCI I/O resources", -+ .start = 0x100, -+ .end = 0x1FF, -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct pci_controller bcm47xx_sb_pci_controller = { -+ .pci_ops = &sb_pci_ops, -+ .mem_resource = &sb_pci_mem_resource, -+ .io_resource = &sb_pci_io_resource, -+}; -+ -+static struct resource ext_pci_mem_resource = { -+ .name = "Ext PCI Memory resources", -+ .start = SB_PCI_DMA, -+// .end = 0x7FFFFFFF, -+ .end = 0x40FFFFFF, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource ext_pci_io_resource = { -+ .name = "Ext PCI I/O resources", -+ .start = 0x200, -+ .end = 0x2FF, -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct pci_controller bcm47xx_ext_pci_controller = { -+ .pci_ops = &sb_pci_ops, -+ .mem_resource = &ext_pci_mem_resource, -+ .io_resource = &ext_pci_io_resource, -+}; -+ -+static int __init bcm47xx_pci_init(void) -+{ -+ register_pci_controller(&bcm47xx_sb_pci_controller); -+ register_pci_controller(&bcm47xx_ext_pci_controller); -+ return 0; -+} -+ -+early_initcall(bcm47xx_pci_init); -diff -Nur linux-2.6.12.5/arch/mips/pci/pci.c linux-2.6.12.5-brcm/arch/mips/pci/pci.c ---- linux-2.6.12.5/arch/mips/pci/pci.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/arch/mips/pci/pci.c 2005-08-28 11:12:20.629828904 +0200 -@@ -238,7 +238,8 @@ - if (dev->resource[i].flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (dev->resource[i].flags & IORESOURCE_MEM) -- offset = hose->mem_offset; -+ offset = 0x26000000; -+ // offset = hose->mem_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; -diff -Nur linux-2.6.12.5/drivers/mtd/maps/Kconfig linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig ---- linux-2.6.12.5/drivers/mtd/maps/Kconfig 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig 2005-08-28 16:21:23.595930936 +0200 -@@ -357,6 +357,12 @@ - Mapping for the Flaga digital module. If you don't have one, ignore - this setting. - -+config MTD_BCM47XX -+ tristate "BCM47xx flash device" -+ depends on MIPS && MTD_CFI && BCM947XX -+ help -+ Support for the flash chips on the BCM947xx board. -+ - config MTD_BEECH - tristate "CFI Flash device mapped on IBM 405LP Beech" - depends on MTD_CFI && PPC32 && 40x && BEECH -diff -Nur linux-2.6.12.5/drivers/mtd/maps/Makefile linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile ---- linux-2.6.12.5/drivers/mtd/maps/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile 2005-08-28 11:12:20.666823280 +0200 -@@ -31,6 +31,7 @@ - obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o - obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o - obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o -+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o - obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o - obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o - obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o -diff -Nur linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c ---- linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c 2005-08-28 17:01:50.948899632 +0200 -@@ -0,0 +1,131 @@ -+/* -+ * Flash mapping for BCM947XX boards -+ * -+ * Copyright (C) 2001 Broadcom Corporation -+ * -+ * $Id: bcm47xx-flash.c,v 1.1 2004/10/21 07:18:31 jolt Exp $ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define WINDOW_ADDR 0x1c000000 -+#define WINDOW_SIZE (0x400000*2) -+#define BUSWIDTH 2 -+ -+static struct mtd_info *bcm947xx_mtd; -+ -+static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+#define MIPS_MEMCPY_ALIGN 4 -+ map_word ret; -+ ssize_t transfer; -+ ssize_t done = 0; -+ if ((len >= MIPS_MEMCPY_ALIGN) && (!(from & (MIPS_MEMCPY_ALIGN - 1))) && (!(((unsigned int)to & (MIPS_MEMCPY_ALIGN - 1))))) { -+ done = len & ~(MIPS_MEMCPY_ALIGN - 1); -+ memcpy_fromio(to, map->virt + from, done); -+ } -+ while (done < len) { -+ ret = map->read(map, from + done); -+ transfer = len - done; -+ if (transfer > map->bankwidth) -+ transfer = map->bankwidth; -+ memcpy((void *)((unsigned long)to + done), &ret.x[0], transfer); -+ done += transfer; -+ } -+} -+ -+static struct map_info bcm947xx_map = { -+ name: "Physically mapped flash", -+ size: WINDOW_SIZE, -+ bankwidth: BUSWIDTH, -+ phys: WINDOW_ADDR, -+}; -+ -+#define SECTORS *64*1024 -+ -+#ifdef CONFIG_MTD_PARTITIONS -+#if 0 -+static struct mtd_partition bcm947xx_parts[] = { -+// 64 - 4 - 14 - 1 = 45 = 8 + 37 -+ { name: "pmon", offset: 0, size: 4 SECTORS, mask_flags: MTD_WRITEABLE }, -+ { name: "linux", offset: MTDPART_OFS_APPEND, size: 14 SECTORS }, -+ { name: "rescue", offset: MTDPART_OFS_APPEND, size: 8 SECTORS }, -+ { name: "rootfs", offset: MTDPART_OFS_APPEND, size: 37 SECTORS }, -+ { name: "nvram", offset: MTDPART_OFS_APPEND, size: 1 SECTORS, mask_flags: MTD_WRITEABLE }, -+}; -+#else -+static struct mtd_partition bcm947xx_parts[] = { -+ { name: "cfe", -+ offset: 0, -+ size: 384*1024, -+ mask_flags: MTD_WRITEABLE -+ }, -+ { name: "config", -+ offset: MTDPART_OFS_APPEND, -+ size: 128*1024 -+ }, -+ { name: "linux", -+ offset: MTDPART_OFS_APPEND, -+ size: 10*128*1024 -+ }, -+ { name: "jffs", -+ offset: MTDPART_OFS_APPEND, -+ size: (8*1024*1024)-((384*1024)+(128*1024)+(10*128*1024)+(128*1024)), -+ }, -+ { name: "nvram", -+ offset: MTDPART_OFS_APPEND, -+ size: 128*1024, -+ mask_flags: MTD_WRITEABLE -+ }, -+}; -+#endif -+#endif -+ -+int __init init_bcm947xx_map(void) -+{ -+ bcm947xx_map.virt = (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); -+ -+ if (!bcm947xx_map.virt) { -+ printk("Failed to ioremap\n"); -+ return -EIO; -+ } -+ simple_map_init(&bcm947xx_map); -+ -+ bcm947xx_map.copy_from = bcm947xx_map_copy_from; -+ -+ if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { -+ printk("Failed to do_map_probe\n"); -+ iounmap((void *)bcm947xx_map.virt); -+ return -ENXIO; -+ } -+ -+ bcm947xx_mtd->owner = THIS_MODULE; -+ -+ printk(KERN_NOTICE "flash device: %x at %x\n", bcm947xx_mtd->size, WINDOW_ADDR); -+ -+#ifdef CONFIG_MTD_PARTITIONS -+ return add_mtd_partitions(bcm947xx_mtd, bcm947xx_parts, sizeof(bcm947xx_parts)/sizeof(bcm947xx_parts[0])); -+#else -+ return 0; -+#endif -+} -+ -+void __exit cleanup_bcm947xx_map(void) -+{ -+#ifdef CONFIG_MTD_PARTITIONS -+ del_mtd_partitions(bcm947xx_mtd); -+#endif -+ map_destroy(bcm947xx_mtd); -+ iounmap((void *)bcm947xx_map.virt); -+} -+ -+module_init(init_bcm947xx_map); -+module_exit(cleanup_bcm947xx_map); -diff -Nur linux-2.6.12.5/drivers/net/b44.c linux-2.6.12.5-brcm/drivers/net/b44.c ---- linux-2.6.12.5/drivers/net/b44.c 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/net/b44.c 2005-08-28 11:12:20.691819480 +0200 -@@ -1,7 +1,8 @@ --/* b44.c: Broadcom 4400 device driver. -+/* b44.c: Broadcom 4400/47xx device driver. - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) -- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * - * Distribute under GPL. - */ -@@ -78,7 +79,7 @@ - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; - - MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); --MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); -+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver"); - MODULE_LICENSE("GPL"); - MODULE_VERSION(DRV_MODULE_VERSION); - -@@ -93,6 +94,8 @@ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { } /* terminate list with empty entry */ - }; - -@@ -106,24 +109,13 @@ - static void b44_poll_controller(struct net_device *dev); - #endif - --static inline unsigned long br32(const struct b44 *bp, unsigned long reg) --{ -- return readl(bp->regs + reg); --} -- --static inline void bw32(const struct b44 *bp, -- unsigned long reg, unsigned long val) --{ -- writel(val, bp->regs + reg); --} -- - static int b44_wait_bit(struct b44 *bp, unsigned long reg, - u32 bit, unsigned long timeout, const int clear) - { - unsigned long i; - - for (i = 0; i < timeout; i++) { -- u32 val = br32(bp, reg); -+ u32 val = br32(reg); - - if (clear && !(val & bit)) - break; -@@ -154,7 +146,7 @@ - - static u32 ssb_get_core_rev(struct b44 *bp) - { -- return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); -+ return (br32(B44_SBIDHIGH) & SBIDHIGH_RC_MASK); - } - - static u32 ssb_pci_setup(struct b44 *bp, u32 cores) -@@ -165,13 +157,13 @@ - pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); - pci_rev = ssb_get_core_rev(bp); - -- val = br32(bp, B44_SBINTVEC); -+ val = br32(B44_SBINTVEC); - val |= cores; -- bw32(bp, B44_SBINTVEC, val); -+ bw32(B44_SBINTVEC, val); - -- val = br32(bp, SSB_PCI_TRANS_2); -+ val = br32(SSB_PCI_TRANS_2); - val |= SSB_PCI_PREF | SSB_PCI_BURST; -- bw32(bp, SSB_PCI_TRANS_2, val); -+ bw32(SSB_PCI_TRANS_2, val); - - pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); - -@@ -180,18 +172,18 @@ - - static void ssb_core_disable(struct b44 *bp) - { -- if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) -+ if (br32(B44_SBTMSLOW) & SBTMSLOW_RESET) - return; - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); - b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); - b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | -+ bw32(B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | - SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -+ br32(B44_SBTMSLOW); - udelay(1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -+ br32(B44_SBTMSLOW); - udelay(1); - } - -@@ -200,58 +192,65 @@ - u32 val; - - ssb_core_disable(bp); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -+ br32(B44_SBTMSLOW); - udelay(1); - - /* Clear SERR if set, this is a hw bug workaround. */ -- if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) -- bw32(bp, B44_SBTMSHIGH, 0); -+ if (br32(B44_SBTMSHIGH) & SBTMSHIGH_SERR) -+ bw32(B44_SBTMSHIGH, 0); - -- val = br32(bp, B44_SBIMSTATE); -+ val = br32(B44_SBIMSTATE); - if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) -- bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); -+ bw32(B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -+ br32(B44_SBTMSLOW); - udelay(1); - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -- br32(bp, B44_SBTMSLOW); -+ bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -+ br32(B44_SBTMSLOW); - udelay(1); - } - -+static int b44_4713_instance; -+ - static int ssb_core_unit(struct b44 *bp) - { --#if 0 -- u32 val = br32(bp, B44_SBADMATCH0); -- u32 base; -- -- type = val & SBADMATCH0_TYPE_MASK; -- switch (type) { -- case 0: -- base = val & SBADMATCH0_BS0_MASK; -- break; -- -- case 1: -- base = val & SBADMATCH0_BS1_MASK; -- break; -- -- case 2: -- default: -- base = val & SBADMATCH0_BS2_MASK; -- break; -- }; --#endif -- return 0; -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) -+ return b44_4713_instance++; -+ else -+ return 0; - } - - static int ssb_is_core_up(struct b44 *bp) - { -- return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) -+ return ((br32(B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) - == SBTMSLOW_CLOCK); - } - -+static void __b44_cam_read(struct b44 *bp, unsigned char *data, int index) -+{ -+ u32 val; -+ -+ bw32(B44_CAM_CTRL, (CAM_CTRL_READ | -+ (index << CAM_CTRL_INDEX_SHIFT))); -+ -+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); -+ -+ val = br32(B44_CAM_DATA_LO); -+ -+ data[2] = (val >> 24) & 0xFF; -+ data[3] = (val >> 16) & 0xFF; -+ data[4] = (val >> 8) & 0xFF; -+ data[5] = (val >> 0) & 0xFF; -+ -+ val = br32(B44_CAM_DATA_HI); -+ -+ data[0] = (val >> 8) & 0xFF; -+ data[1] = (val >> 0) & 0xFF; -+} -+ - static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) - { - u32 val; -@@ -260,19 +259,19 @@ - val |= ((u32) data[3]) << 16; - val |= ((u32) data[4]) << 8; - val |= ((u32) data[5]) << 0; -- bw32(bp, B44_CAM_DATA_LO, val); -+ bw32(B44_CAM_DATA_LO, val); - val = (CAM_DATA_HI_VALID | - (((u32) data[0]) << 8) | - (((u32) data[1]) << 0)); -- bw32(bp, B44_CAM_DATA_HI, val); -- bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE | -+ bw32(B44_CAM_DATA_HI, val); -+ bw32(B44_CAM_CTRL, (CAM_CTRL_WRITE | - (index << CAM_CTRL_INDEX_SHIFT))); - b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); - } - - static inline void __b44_disable_ints(struct b44 *bp) - { -- bw32(bp, B44_IMASK, 0); -+ bw32(B44_IMASK, 0); - } - - static void b44_disable_ints(struct b44 *bp) -@@ -280,34 +279,40 @@ - __b44_disable_ints(bp); - - /* Flush posted writes. */ -- br32(bp, B44_IMASK); -+ br32(B44_IMASK); - } - - static void b44_enable_ints(struct b44 *bp) - { -- bw32(bp, B44_IMASK, bp->imask); -+ bw32(B44_IMASK, bp->imask); - } - - static int b44_readphy(struct b44 *bp, int reg, u32 *val) - { - int err; - -- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); -- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ bw32(B44_EMAC_ISTAT, EMAC_INT_MII); -+ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | - (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); - err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -- *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; -+ *val = br32(B44_MDIO_DATA) & MDIO_DATA_DATA; - - return err; - } - - static int b44_writephy(struct b44 *bp, int reg, u32 val) - { -- bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); -- bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ bw32(B44_EMAC_ISTAT, EMAC_INT_MII); -+ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | - (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | -@@ -344,6 +349,9 @@ - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ - err = b44_writephy(bp, MII_BMCR, BMCR_RESET); - if (err) - return err; -@@ -367,20 +375,20 @@ - bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE); - bp->flags |= pause_flags; - -- val = br32(bp, B44_RXCONFIG); -+ val = br32(B44_RXCONFIG); - if (pause_flags & B44_FLAG_RX_PAUSE) - val |= RXCONFIG_FLOW; - else - val &= ~RXCONFIG_FLOW; -- bw32(bp, B44_RXCONFIG, val); -+ bw32(B44_RXCONFIG, val); - -- val = br32(bp, B44_MAC_FLOW); -+ val = br32(B44_MAC_FLOW); - if (pause_flags & B44_FLAG_TX_PAUSE) - val |= (MAC_FLOW_PAUSE_ENAB | - (0xc0 & MAC_FLOW_RX_HI_WATER)); - else - val &= ~MAC_FLOW_PAUSE_ENAB; -- bw32(bp, B44_MAC_FLOW, val); -+ bw32(B44_MAC_FLOW, val); - } - - static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) -@@ -414,6 +422,9 @@ - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ - if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) - goto out; - if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, -@@ -476,11 +487,11 @@ - - val = &bp->hw_stats.tx_good_octets; - for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) { -- *val++ += br32(bp, reg); -+ *val++ += br32(reg); - } - val = &bp->hw_stats.rx_good_octets; - for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) { -- *val++ += br32(bp, reg); -+ *val++ += br32(reg); - } - } - -@@ -506,6 +517,19 @@ - { - u32 bmsr, aux; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) { -+ bp->flags |= B44_FLAG_100_BASE_T; -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ if (!netif_carrier_ok(bp->dev)) { -+ u32 val = br32(B44_TX_CTRL); -+ val |= TX_CTRL_DUPLEX; -+ bw32(B44_TX_CTRL, val); -+ netif_carrier_on(bp->dev); -+ b44_link_report(bp); -+ } -+ return; -+ } -+ - if (!b44_readphy(bp, MII_BMSR, &bmsr) && - !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && - (bmsr != 0xffff)) { -@@ -520,14 +544,14 @@ - - if (!netif_carrier_ok(bp->dev) && - (bmsr & BMSR_LSTATUS)) { -- u32 val = br32(bp, B44_TX_CTRL); -+ u32 val = br32(B44_TX_CTRL); - u32 local_adv, remote_adv; - - if (bp->flags & B44_FLAG_FULL_DUPLEX) - val |= TX_CTRL_DUPLEX; - else - val &= ~TX_CTRL_DUPLEX; -- bw32(bp, B44_TX_CTRL, val); -+ bw32(B44_TX_CTRL, val); - - if (!(bp->flags & B44_FLAG_FORCE_LINK) && - !b44_readphy(bp, MII_ADVERTISE, &local_adv) && -@@ -572,7 +596,7 @@ - { - u32 cur, cons; - -- cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK; -+ cur = br32(B44_DMATX_STAT) & DMATX_STAT_CDMASK; - cur /= sizeof(struct dma_desc); - - /* XXX needs updating when NETIF_F_SG is supported */ -@@ -596,7 +620,7 @@ - TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH) - netif_wake_queue(bp->dev); - -- bw32(bp, B44_GPTIMER, 0); -+ bw32(B44_GPTIMER, 0); - } - - /* Works like this. This chip writes a 'struct rx_header" 30 bytes -@@ -713,7 +737,7 @@ - u32 cons, prod; - - received = 0; -- prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK; -+ prod = br32(B44_DMARX_STAT) & DMARX_STAT_CDMASK; - prod /= sizeof(struct dma_desc); - cons = bp->rx_cons; - -@@ -792,7 +816,7 @@ - } - - bp->rx_cons = cons; -- bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc)); -+ bw32(B44_DMARX_PTR, cons * sizeof(struct dma_desc)); - - return received; - } -@@ -856,8 +880,8 @@ - - spin_lock_irqsave(&bp->lock, flags); - -- istat = br32(bp, B44_ISTAT); -- imask = br32(bp, B44_IMASK); -+ istat = br32(B44_ISTAT); -+ imask = br32(B44_IMASK); - - /* ??? What the fuck is the purpose of the interrupt mask - * ??? register if we have to mask it out by hand anyways? -@@ -877,8 +901,8 @@ - dev->name); - } - -- bw32(bp, B44_ISTAT, istat); -- br32(bp, B44_ISTAT); -+ bw32(B44_ISTAT, istat); -+ br32(B44_ISTAT); - } - spin_unlock_irqrestore(&bp->lock, flags); - return IRQ_RETVAL(handled); -@@ -965,11 +989,11 @@ - - wmb(); - -- bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); -+ bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc)); - if (bp->flags & B44_FLAG_BUGGY_TXPTR) -- bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); -+ bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc)); - if (bp->flags & B44_FLAG_REORDER_BUG) -- br32(bp, B44_DMATX_PTR); -+ br32(B44_DMATX_PTR); - - if (TX_BUFFS_AVAIL(bp) < 1) - netif_stop_queue(dev); -@@ -1137,32 +1161,35 @@ - { - unsigned long reg; - -- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); -+ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); - for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) -- br32(bp, reg); -+ br32(reg); - for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) -- br32(bp, reg); -+ br32(reg); - } - - /* bp->lock is held. */ - static void b44_chip_reset(struct b44 *bp) - { -+ unsigned int sb_clock; -+ - if (ssb_is_core_up(bp)) { -- bw32(bp, B44_RCV_LAZY, 0); -- bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); -+ bw32(B44_RCV_LAZY, 0); -+ bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE); - b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1); -- bw32(bp, B44_DMATX_CTRL, 0); -+ bw32(B44_DMATX_CTRL, 0); - bp->tx_prod = bp->tx_cons = 0; -- if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) { -+ if (br32(B44_DMARX_STAT) & DMARX_STAT_EMASK) { - b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, - 100, 0); - } -- bw32(bp, B44_DMARX_CTRL, 0); -+ bw32(B44_DMARX_CTRL, 0); - bp->rx_prod = bp->rx_cons = 0; - } else { -- ssb_pci_setup(bp, (bp->core_unit == 0 ? -- SBINTVEC_ENET0 : -- SBINTVEC_ENET1)); -+ if (bp->pdev->device != PCI_DEVICE_ID_BCM4713) -+ ssb_pci_setup(bp, (bp->core_unit == 0 ? -+ SBINTVEC_ENET0 : -+ SBINTVEC_ENET1)); - } - - ssb_core_reset(bp); -@@ -1170,20 +1197,26 @@ - b44_clear_stats(bp); - - /* Make PHY accessible. */ -- bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -- (0x0d & MDIO_CTRL_MAXF_MASK))); -- br32(bp, B44_MDIO_CTRL); -- -- if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { -- bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); -- br32(bp, B44_ENET_CTRL); -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) -+ sb_clock = 100000000; /* 100 MHz */ -+ else -+ sb_clock = 62500000; /* 62.5 MHz */ -+ -+ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO) -+ & MDIO_CTRL_MAXF_MASK))); -+ br32(B44_MDIO_CTRL); -+ -+ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) { -+ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL); -+ br32(B44_ENET_CTRL); - bp->flags &= ~B44_FLAG_INTERNAL_PHY; - } else { -- u32 val = br32(bp, B44_DEVCTRL); -+ u32 val = br32(B44_DEVCTRL); - - if (val & DEVCTRL_EPR) { -- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); -- br32(bp, B44_DEVCTRL); -+ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR)); -+ br32(B44_DEVCTRL); - udelay(100); - } - bp->flags |= B44_FLAG_INTERNAL_PHY; -@@ -1200,13 +1233,13 @@ - /* bp->lock is held. */ - static void __b44_set_mac_addr(struct b44 *bp) - { -- bw32(bp, B44_CAM_CTRL, 0); -+ bw32(B44_CAM_CTRL, 0); - if (!(bp->dev->flags & IFF_PROMISC)) { - u32 val; - - __b44_cam_write(bp, bp->dev->dev_addr, 0); -- val = br32(bp, B44_CAM_CTRL); -- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); -+ val = br32(B44_CAM_CTRL); -+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE); - } - } - -@@ -1240,30 +1273,30 @@ - b44_setup_phy(bp); - - /* Enable CRC32, set proper LED modes and power on PHY */ -- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); -- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); -+ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); -+ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); - - /* This sets the MAC address too. */ - __b44_set_rx_mode(bp->dev); - - /* MTU + eth header + possible VLAN tag + struct rx_header */ -- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -+ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -+ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); - -- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */ -- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); -- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); -- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | -+ bw32(B44_TX_WMARK, 56); /* XXX magic */ -+ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE); -+ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); -+ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | - (bp->rx_offset << DMARX_CTRL_ROSHIFT))); -- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); -+ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); - -- bw32(bp, B44_DMARX_PTR, bp->rx_pending); -+ bw32(B44_DMARX_PTR, bp->rx_pending); - bp->rx_prod = bp->rx_pending; - -- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); -+ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); - -- val = br32(bp, B44_ENET_CTRL); -- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); -+ val = br32(B44_ENET_CTRL); -+ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); - } - - static int b44_open(struct net_device *dev) -@@ -1416,11 +1449,11 @@ - int i=0; - unsigned char zero[6] = {0,0,0,0,0,0}; - -- val = br32(bp, B44_RXCONFIG); -+ val = br32(B44_RXCONFIG); - val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); - if (dev->flags & IFF_PROMISC) { - val |= RXCONFIG_PROMISC; -- bw32(bp, B44_RXCONFIG, val); -+ bw32(B44_RXCONFIG, val); - } else { - __b44_set_mac_addr(bp); - -@@ -1432,9 +1465,9 @@ - for(;i<64;i++) { - __b44_cam_write(bp, zero, i); - } -- bw32(bp, B44_RXCONFIG, val); -- val = br32(bp, B44_CAM_CTRL); -- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); -+ bw32(B44_RXCONFIG, val); -+ val = br32(B44_CAM_CTRL); -+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE); - } - } - -@@ -1704,19 +1737,41 @@ - { - u8 eeprom[128]; - int err; -+ unsigned long flags; - -- err = b44_read_eeprom(bp, &eeprom[0]); -- if (err) -- goto out; -- -- bp->dev->dev_addr[0] = eeprom[79]; -- bp->dev->dev_addr[1] = eeprom[78]; -- bp->dev->dev_addr[2] = eeprom[81]; -- bp->dev->dev_addr[3] = eeprom[80]; -- bp->dev->dev_addr[4] = eeprom[83]; -- bp->dev->dev_addr[5] = eeprom[82]; -- -- bp->phy_addr = eeprom[90] & 0x1f; -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) { -+ /* -+ * BCM47xx boards don't have a EEPROM. The MAC is stored in -+ * a NVRAM area somewhere in the flash memory. As we don't -+ * know the location and/or the format of the NVRAM area -+ * here, we simply rely on the bootloader to write the -+ * MAC into the CAM. -+ */ -+ spin_lock_irqsave(&bp->lock, flags); -+ __b44_cam_read(bp, bp->dev->dev_addr, 0); -+ spin_unlock_irqrestore(&bp->lock, flags); -+ -+ /* -+ * BCM47xx boards don't have a PHY. Usually there is a switch -+ * chip with multiple PHYs connected to the PHY port. -+ */ -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+ bp->dma_offset = 0; -+ } else { -+ err = b44_read_eeprom(bp, &eeprom[0]); -+ if (err) -+ return err; -+ -+ bp->dev->dev_addr[0] = eeprom[79]; -+ bp->dev->dev_addr[1] = eeprom[78]; -+ bp->dev->dev_addr[2] = eeprom[81]; -+ bp->dev->dev_addr[3] = eeprom[80]; -+ bp->dev->dev_addr[4] = eeprom[83]; -+ bp->dev->dev_addr[5] = eeprom[82]; -+ -+ bp->phy_addr = eeprom[90] & 0x1f; -+ bp->dma_offset = SB_PCI_DMA; -+ } - - /* With this, plus the rx_header prepended to the data by the - * hardware, we'll land the ethernet header on a 2-byte boundary. -@@ -1726,13 +1781,12 @@ - bp->imask = IMASK_DEF; - - bp->core_unit = ssb_core_unit(bp); -- bp->dma_offset = SB_PCI_DMA; - - /* XXX - really required? - bp->flags |= B44_FLAG_BUGGY_TXPTR; - */ --out: -- return err; -+ -+ return 0; - } - - static int __devinit b44_init_one(struct pci_dev *pdev, -@@ -1810,7 +1864,7 @@ - - spin_lock_init(&bp->lock); - -- bp->regs = ioremap(b44reg_base, b44reg_len); -+ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len); - if (bp->regs == 0UL) { - printk(KERN_ERR PFX "Cannot map device registers, " - "aborting.\n"); -@@ -1871,7 +1925,8 @@ - - pci_save_state(bp->pdev); - -- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); -+ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name, -+ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400"); - for (i = 0; i < 6; i++) - printk("%2.2x%c", dev->dev_addr[i], - i == 5 ? '\n' : ':'); -@@ -1879,7 +1934,7 @@ - return 0; - - err_out_iounmap: -- iounmap(bp->regs); -+ iounmap((void *) bp->regs); - - err_out_free_dev: - free_netdev(dev); -@@ -1901,7 +1956,7 @@ - struct b44 *bp = netdev_priv(dev); - - unregister_netdev(dev); -- iounmap(bp->regs); -+ iounmap((void *) bp->regs); - free_netdev(dev); - pci_release_regions(pdev); - pci_disable_device(pdev); -diff -Nur linux-2.6.12.5/drivers/net/b44.c.orig linux-2.6.12.5-brcm/drivers/net/b44.c.orig ---- linux-2.6.12.5/drivers/net/b44.c.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/drivers/net/b44.c.orig 2005-08-15 02:20:18.000000000 +0200 -@@ -0,0 +1,1978 @@ -+/* b44.c: Broadcom 4400 device driver. -+ * -+ * Copyright (C) 2002 David S. Miller (davem@redhat.com) -+ * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) -+ * -+ * Distribute under GPL. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/* sbadmatch0 */ ++#define SBAM_TYPE_MASK 0x3 /* address type */ ++#define SBAM_AD64 0x4 /* reserved */ ++#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ ++#define SBAM_ADINT0_SHIFT 3 ++#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ ++#define SBAM_ADINT1_SHIFT 3 ++#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ ++#define SBAM_ADINT2_SHIFT 3 ++#define SBAM_ADEN 0x400 /* enable */ ++#define SBAM_ADNEG 0x800 /* negative decode */ ++#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ ++#define SBAM_BASE0_SHIFT 8 ++#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ ++#define SBAM_BASE1_SHIFT 12 ++#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ ++#define SBAM_BASE2_SHIFT 16 + -+#include -+#include -+#include ++/* sbtmconfiglow */ ++#define SBTMCL_CD_MASK 0xff /* clock divide */ ++#define SBTMCL_CO_MASK 0xf800 /* clock offset */ ++#define SBTMCL_CO_SHIFT 11 ++#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ ++#define SBTMCL_IF_SHIFT 18 ++#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ ++#define SBTMCL_IM_SHIFT 24 + -+#include "b44.h" -+ -+#define DRV_MODULE_NAME "b44" -+#define PFX DRV_MODULE_NAME ": " -+#define DRV_MODULE_VERSION "0.95" -+#define DRV_MODULE_RELDATE "Aug 3, 2004" -+ -+#define B44_DEF_MSG_ENABLE \ -+ (NETIF_MSG_DRV | \ -+ NETIF_MSG_PROBE | \ -+ NETIF_MSG_LINK | \ -+ NETIF_MSG_TIMER | \ -+ NETIF_MSG_IFDOWN | \ -+ NETIF_MSG_IFUP | \ -+ NETIF_MSG_RX_ERR | \ -+ NETIF_MSG_TX_ERR) -+ -+/* length of time before we decide the hardware is borked, -+ * and dev->tx_timeout() should be called to fix the problem -+ */ -+#define B44_TX_TIMEOUT (5 * HZ) -+ -+/* hardware minimum and maximum for a single frame's data payload */ -+#define B44_MIN_MTU 60 -+#define B44_MAX_MTU 1500 -+ -+#define B44_RX_RING_SIZE 512 -+#define B44_DEF_RX_RING_PENDING 200 -+#define B44_RX_RING_BYTES (sizeof(struct dma_desc) * \ -+ B44_RX_RING_SIZE) -+#define B44_TX_RING_SIZE 512 -+#define B44_DEF_TX_RING_PENDING (B44_TX_RING_SIZE - 1) -+#define B44_TX_RING_BYTES (sizeof(struct dma_desc) * \ -+ B44_TX_RING_SIZE) -+#define B44_DMA_MASK 0x3fffffff -+ -+#define TX_RING_GAP(BP) \ -+ (B44_TX_RING_SIZE - (BP)->tx_pending) -+#define TX_BUFFS_AVAIL(BP) \ -+ (((BP)->tx_cons <= (BP)->tx_prod) ? \ -+ (BP)->tx_cons + (BP)->tx_pending - (BP)->tx_prod : \ -+ (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP)) -+#define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1)) -+ -+#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64) -+#define TX_PKT_BUF_SZ (B44_MAX_MTU + ETH_HLEN + 8) -+ -+/* minimum number of free TX descriptors required to wake up TX process */ -+#define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4) -+ -+static char version[] __devinitdata = -+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -+ -+MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); -+MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_MODULE_VERSION); -+ -+static int b44_debug = -1; /* -1 == use B44_DEF_MSG_ENABLE as value */ -+module_param(b44_debug, int, 0); -+MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value"); -+ -+static struct pci_device_id b44_pci_tbl[] = { -+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -+ { } /* terminate list with empty entry */ -+}; ++/* sbtmconfighigh */ ++#define SBTMCH_BM_MASK 0x3 /* busy mode */ ++#define SBTMCH_RM_MASK 0x3 /* retry mode */ ++#define SBTMCH_RM_SHIFT 2 ++#define SBTMCH_SM_MASK 0x30 /* stop mode */ ++#define SBTMCH_SM_SHIFT 4 ++#define SBTMCH_EM_MASK 0x300 /* sb error mode */ ++#define SBTMCH_EM_SHIFT 8 ++#define SBTMCH_IM_MASK 0xc00 /* int mode */ ++#define SBTMCH_IM_SHIFT 10 + -+MODULE_DEVICE_TABLE(pci, b44_pci_tbl); ++/* sbbconfig */ ++#define SBBC_LAT_MASK 0x3 /* sb latency */ ++#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ ++#define SBBC_MAX0_SHIFT 16 ++#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ ++#define SBBC_MAX1_SHIFT 20 + -+static void b44_halt(struct b44 *); -+static void b44_init_rings(struct b44 *); -+static void b44_init_hw(struct b44 *); -+static int b44_poll(struct net_device *dev, int *budget); -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void b44_poll_controller(struct net_device *dev); -+#endif ++/* sbbstate */ ++#define SBBS_SRD 0x1 /* st reg disable */ ++#define SBBS_HRD 0x2 /* hold reg disable */ + -+static inline unsigned long br32(const struct b44 *bp, unsigned long reg) -+{ -+ return readl(bp->regs + reg); -+} ++/* sbidlow */ ++#define SBIDL_CS_MASK 0x3 /* config space */ ++#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ ++#define SBIDL_AR_SHIFT 3 ++#define SBIDL_SYNCH 0x40 /* sync */ ++#define SBIDL_INIT 0x80 /* initiator */ ++#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ ++#define SBIDL_MINLAT_SHIFT 8 ++#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ ++#define SBIDL_MAXLAT_SHIFT 12 ++#define SBIDL_FIRST 0x10000 /* this initiator is first */ ++#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ ++#define SBIDL_CW_SHIFT 18 ++#define SBIDL_TP_MASK 0xf00000 /* target ports */ ++#define SBIDL_TP_SHIFT 20 ++#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ ++#define SBIDL_IP_SHIFT 24 ++#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ ++#define SBIDL_RV_SHIFT 28 ++#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ ++#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ + -+static inline void bw32(const struct b44 *bp, -+ unsigned long reg, unsigned long val) -+{ -+ writel(val, bp->regs + reg); -+} ++/* sbidhigh */ ++#define SBIDH_RC_MASK 0x000f /* revision code */ ++#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ ++#define SBIDH_RCE_SHIFT 8 ++#define SBCOREREV(sbidh) \ ++ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) ++#define SBIDH_CC_MASK 0x8ff0 /* core code */ ++#define SBIDH_CC_SHIFT 4 ++#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ ++#define SBIDH_VC_SHIFT 16 + -+static int b44_wait_bit(struct b44 *bp, unsigned long reg, -+ u32 bit, unsigned long timeout, const int clear) -+{ -+ unsigned long i; ++#define SB_COMMIT 0xfd8 /* update buffered registers value */ + -+ for (i = 0; i < timeout; i++) { -+ u32 val = br32(bp, reg); ++/* vendor codes */ ++#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ + -+ if (clear && !(val & bit)) -+ break; -+ if (!clear && (val & bit)) -+ break; -+ udelay(10); -+ } -+ if (i == timeout) { -+ printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register " -+ "%lx to %s.\n", -+ bp->dev->name, -+ bit, reg, -+ (clear ? "clear" : "set")); -+ return -ENODEV; -+ } -+ return 0; -+} ++/* core codes */ ++#define SB_CC 0x800 /* chipcommon core */ ++#define SB_ILINE20 0x801 /* iline20 core */ ++#define SB_SDRAM 0x803 /* sdram core */ ++#define SB_PCI 0x804 /* pci core */ ++#define SB_MIPS 0x805 /* mips core */ ++#define SB_ENET 0x806 /* enet mac core */ ++#define SB_CODEC 0x807 /* v90 codec core */ ++#define SB_USB 0x808 /* usb 1.1 host/device core */ ++#define SB_ADSL 0x809 /* ADSL core */ ++#define SB_ILINE100 0x80a /* iline100 core */ ++#define SB_IPSEC 0x80b /* ipsec core */ ++#define SB_PCMCIA 0x80d /* pcmcia core */ ++#define SB_SOCRAM 0x80e /* internal memory core */ ++#define SB_MEMC 0x80f /* memc sdram core */ ++#define SB_EXTIF 0x811 /* external interface core */ ++#define SB_D11 0x812 /* 802.11 MAC core */ ++#define SB_MIPS33 0x816 /* mips3302 core */ ++#define SB_USB11H 0x817 /* usb 1.1 host core */ ++#define SB_USB11D 0x818 /* usb 1.1 device core */ ++#define SB_USB20H 0x819 /* usb 2.0 host core */ ++#define SB_USB20D 0x81a /* usb 2.0 device core */ ++#define SB_SDIOH 0x81b /* sdio host core */ ++#define SB_ROBO 0x81c /* roboswitch core */ ++#define SB_ATA100 0x81d /* parallel ATA core */ ++#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */ ++#define SB_GIGETH 0x81f /* gigabit ethernet core */ ++#define SB_PCIE 0x820 /* pci express core */ ++#define SB_SRAMC 0x822 /* SRAM controller core */ ++#define SB_MINIMAC 0x823 /* MINI MAC/phy core */ ++ ++#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */ ++ ++/* Not really related to Silicon Backplane, but a couple of software ++ * conventions for the use the flash space: ++ */ ++ ++/* Minumum amount of flash we support */ ++#define FLASH_MIN 0x00020000 /* Minimum flash size */ ++ ++/* A boot/binary may have an embedded block that describes its size */ ++#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ ++#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */ ++#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ ++#define BISZ_TXTST_IDX 1 /* 1: text start */ ++#define BISZ_TXTEND_IDX 2 /* 2: text start */ ++#define BISZ_DATAST_IDX 3 /* 3: text start */ ++#define BISZ_DATAEND_IDX 4 /* 4: text start */ ++#define BISZ_BSSST_IDX 5 /* 5: text start */ ++#define BISZ_BSSEND_IDX 6 /* 6: text start */ ++#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */ + -+/* Sonics SiliconBackplane support routines. ROFL, you should see all the -+ * buzz words used on this company's website :-) ++#endif /* _SBCONFIG_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h +--- linux.old/arch/mips/bcm947xx/include/sbextif.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h 2005-12-15 16:48:55.651993750 +0100 +@@ -0,0 +1,242 @@ ++/* ++ * Hardware-specific External Interface I/O core definitions ++ * for the BCM47xx family of SiliconBackplane-based chips. ++ * ++ * The External Interface core supports a total of three external chip selects ++ * supporting external interfaces. One of the external chip selects is ++ * used for Flash, one is used for PCMCIA, and the other may be ++ * programmed to support either a synchronous interface or an ++ * asynchronous interface. The asynchronous interface can be used to ++ * support external devices such as UARTs and the BCM2019 Bluetooth ++ * baseband processor. ++ * The external interface core also contains 2 on-chip 16550 UARTs, clock ++ * frequency control, a watchdog interrupt timer, and a GPIO interface. + * -+ * All of these routines must be invoked with bp->lock held and -+ * interrupts disabled. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ + */ + -+#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ -+#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */ -+ -+static u32 ssb_get_core_rev(struct b44 *bp) -+{ -+ return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); -+} -+ -+static u32 ssb_pci_setup(struct b44 *bp, u32 cores) -+{ -+ u32 bar_orig, pci_rev, val; ++#ifndef _SBEXTIF_H ++#define _SBEXTIF_H + -+ pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig); -+ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); -+ pci_rev = ssb_get_core_rev(bp); ++/* external interface address space */ ++#define EXTIF_PCMCIA_MEMBASE(x) (x) ++#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) ++#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) ++#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) ++#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) + -+ val = br32(bp, B44_SBINTVEC); -+ val |= cores; -+ bw32(bp, B44_SBINTVEC, val); ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ + -+ val = br32(bp, SSB_PCI_TRANS_2); -+ val |= SSB_PCI_PREF | SSB_PCI_BURST; -+ bw32(bp, SSB_PCI_TRANS_2, val); ++/* ++ * The multiple instances of output and output enable registers ++ * are present to allow driver software for multiple cores to control ++ * gpio outputs without needing to share a single register pair. ++ */ ++struct gpiouser { ++ uint32 out; ++ uint32 outen; ++}; ++#define NGPIOUSER 5 + -+ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 extstatus; ++ uint32 PAD[2]; + -+ return pci_rev; -+} ++ /* pcmcia control registers */ ++ uint32 pcmcia_config; ++ uint32 pcmcia_memwait; ++ uint32 pcmcia_attrwait; ++ uint32 pcmcia_iowait; + -+static void ssb_core_disable(struct b44 *bp) -+{ -+ if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) -+ return; ++ /* programmable interface control registers */ ++ uint32 prog_config; ++ uint32 prog_waitcount; + -+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); -+ b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); -+ b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); -+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | -+ SBTMSLOW_REJECT | SBTMSLOW_RESET)); -+ br32(bp, B44_SBTMSLOW); -+ udelay(1); -+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -+ br32(bp, B44_SBTMSLOW); -+ udelay(1); -+} ++ /* flash control registers */ ++ uint32 flash_config; ++ uint32 flash_waitcount; ++ uint32 PAD[4]; + -+static void ssb_core_reset(struct b44 *bp) -+{ -+ u32 val; ++ uint32 watchdog; + -+ ssb_core_disable(bp); -+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -+ br32(bp, B44_SBTMSLOW); -+ udelay(1); ++ /* clock control */ ++ uint32 clockcontrol_n; ++ uint32 clockcontrol_sb; ++ uint32 clockcontrol_pci; ++ uint32 clockcontrol_mii; ++ uint32 PAD[3]; + -+ /* Clear SERR if set, this is a hw bug workaround. */ -+ if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) -+ bw32(bp, B44_SBTMSHIGH, 0); ++ /* gpio */ ++ uint32 gpioin; ++ struct gpiouser gpio[NGPIOUSER]; ++ uint32 PAD; ++ uint32 ejtagouten; ++ uint32 gpiointpolarity; ++ uint32 gpiointmask; ++ uint32 PAD[153]; + -+ val = br32(bp, B44_SBIMSTATE); -+ if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) -+ bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); ++ uint8 uartdata; ++ uint8 PAD[3]; ++ uint8 uartimer; ++ uint8 PAD[3]; ++ uint8 uartfcr; ++ uint8 PAD[3]; ++ uint8 uartlcr; ++ uint8 PAD[3]; ++ uint8 uartmcr; ++ uint8 PAD[3]; ++ uint8 uartlsr; ++ uint8 PAD[3]; ++ uint8 uartmsr; ++ uint8 PAD[3]; ++ uint8 uartscratch; ++ uint8 PAD[3]; ++} extifregs_t; + -+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -+ br32(bp, B44_SBTMSLOW); -+ udelay(1); ++/* corecontrol */ ++#define CC_UE (1 << 0) /* uart enable */ + -+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -+ br32(bp, B44_SBTMSLOW); -+ udelay(1); -+} ++/* extstatus */ ++#define ES_EM (1 << 0) /* endian mode (ro) */ ++#define ES_EI (1 << 1) /* external interrupt pin (ro) */ ++#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ + -+static int ssb_core_unit(struct b44 *bp) -+{ -+#if 0 -+ u32 val = br32(bp, B44_SBADMATCH0); -+ u32 base; ++/* gpio bit mask */ ++#define GPIO_BIT0 (1 << 0) ++#define GPIO_BIT1 (1 << 1) ++#define GPIO_BIT2 (1 << 2) ++#define GPIO_BIT3 (1 << 3) ++#define GPIO_BIT4 (1 << 4) ++#define GPIO_BIT5 (1 << 5) ++#define GPIO_BIT6 (1 << 6) ++#define GPIO_BIT7 (1 << 7) + -+ type = val & SBADMATCH0_TYPE_MASK; -+ switch (type) { -+ case 0: -+ base = val & SBADMATCH0_BS0_MASK; -+ break; + -+ case 1: -+ base = val & SBADMATCH0_BS1_MASK; -+ break; ++/* pcmcia/prog/flash_config */ ++#define CF_EN (1 << 0) /* enable */ ++#define CF_EM_MASK 0xe /* mode */ ++#define CF_EM_SHIFT 1 ++#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ ++#define CF_EM_SYNC 0x2 /* synchronous mode */ ++#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ ++#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ ++#define CF_BS (1 << 5) /* byteswap */ ++#define CF_CD_MASK 0xc0 /* clock divider */ ++#define CF_CD_SHIFT 6 ++#define CF_CD_DIV2 0x0 /* backplane/2 */ ++#define CF_CD_DIV3 0x40 /* backplane/3 */ ++#define CF_CD_DIV4 0x80 /* backplane/4 */ ++#define CF_CE (1 << 8) /* clock enable */ ++#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ + -+ case 2: -+ default: -+ base = val & SBADMATCH0_BS2_MASK; -+ break; -+ }; -+#endif -+ return 0; -+} ++/* pcmcia_memwait */ ++#define PM_W0_MASK 0x3f /* waitcount0 */ ++#define PM_W1_MASK 0x1f00 /* waitcount1 */ ++#define PM_W1_SHIFT 8 ++#define PM_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PM_W2_SHIFT 16 ++#define PM_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PM_W3_SHIFT 24 + -+static int ssb_is_core_up(struct b44 *bp) -+{ -+ return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) -+ == SBTMSLOW_CLOCK); -+} ++/* pcmcia_attrwait */ ++#define PA_W0_MASK 0x3f /* waitcount0 */ ++#define PA_W1_MASK 0x1f00 /* waitcount1 */ ++#define PA_W1_SHIFT 8 ++#define PA_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PA_W2_SHIFT 16 ++#define PA_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PA_W3_SHIFT 24 + -+static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) -+{ -+ u32 val; -+ -+ val = ((u32) data[2]) << 24; -+ val |= ((u32) data[3]) << 16; -+ val |= ((u32) data[4]) << 8; -+ val |= ((u32) data[5]) << 0; -+ bw32(bp, B44_CAM_DATA_LO, val); -+ val = (CAM_DATA_HI_VALID | -+ (((u32) data[0]) << 8) | -+ (((u32) data[1]) << 0)); -+ bw32(bp, B44_CAM_DATA_HI, val); -+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE | -+ (index << CAM_CTRL_INDEX_SHIFT))); -+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); -+} ++/* pcmcia_iowait */ ++#define PI_W0_MASK 0x3f /* waitcount0 */ ++#define PI_W1_MASK 0x1f00 /* waitcount1 */ ++#define PI_W1_SHIFT 8 ++#define PI_W2_MASK 0x1f0000 /* waitcount2 */ ++#define PI_W2_SHIFT 16 ++#define PI_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PI_W3_SHIFT 24 + -+static inline void __b44_disable_ints(struct b44 *bp) -+{ -+ bw32(bp, B44_IMASK, 0); -+} ++/* prog_waitcount */ ++#define PW_W0_MASK 0x0000001f /* waitcount0 */ ++#define PW_W1_MASK 0x00001f00 /* waitcount1 */ ++#define PW_W1_SHIFT 8 ++#define PW_W2_MASK 0x001f0000 /* waitcount2 */ ++#define PW_W2_SHIFT 16 ++#define PW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define PW_W3_SHIFT 24 + -+static void b44_disable_ints(struct b44 *bp) -+{ -+ __b44_disable_ints(bp); ++#define PW_W0 0x0000000c ++#define PW_W1 0x00000a00 ++#define PW_W2 0x00020000 ++#define PW_W3 0x01000000 + -+ /* Flush posted writes. */ -+ br32(bp, B44_IMASK); -+} ++/* flash_waitcount */ ++#define FW_W0_MASK 0x1f /* waitcount0 */ ++#define FW_W1_MASK 0x1f00 /* waitcount1 */ ++#define FW_W1_SHIFT 8 ++#define FW_W2_MASK 0x1f0000 /* waitcount2 */ ++#define FW_W2_SHIFT 16 ++#define FW_W3_MASK 0x1f000000 /* waitcount3 */ ++#define FW_W3_SHIFT 24 + -+static void b44_enable_ints(struct b44 *bp) -+{ -+ bw32(bp, B44_IMASK, bp->imask); -+} ++/* watchdog */ ++#define WATCHDOG_CLOCK 48000000 /* Hz */ + -+static int b44_readphy(struct b44 *bp, int reg, u32 *val) -+{ -+ int err; ++/* clockcontrol_n */ ++#define CN_N1_MASK 0x3f /* n1 control */ ++#define CN_N2_MASK 0x3f00 /* n2 control */ ++#define CN_N2_SHIFT 8 + -+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); -+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | -+ (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | -+ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (reg << MDIO_DATA_RA_SHIFT) | -+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); -+ err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -+ *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA; ++/* clockcontrol_sb/pci/mii */ ++#define CC_M1_MASK 0x3f /* m1 control */ ++#define CC_M2_MASK 0x3f00 /* m2 control */ ++#define CC_M2_SHIFT 8 ++#define CC_M3_MASK 0x3f0000 /* m3 control */ ++#define CC_M3_SHIFT 16 ++#define CC_MC_MASK 0x1f000000 /* mux control */ ++#define CC_MC_SHIFT 24 + -+ return err; -+} ++/* Clock control default values */ ++#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ ++#define CC_DEF_100 0x04020011 ++#define CC_DEF_33 0x11030011 ++#define CC_DEF_25 0x11050011 + -+static int b44_writephy(struct b44 *bp, int reg, u32 val) -+{ -+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); -+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | -+ (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | -+ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (reg << MDIO_DATA_RA_SHIFT) | -+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) | -+ (val & MDIO_DATA_DATA))); -+ return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -+} ++/* Clock control values for 125Mhz */ ++#define CC_125_N 0x0802 ++#define CC_125_M 0x04020009 ++#define CC_125_M25 0x11090009 ++#define CC_125_M33 0x11090005 + -+/* miilib interface */ -+/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional -+ * due to code existing before miilib use was added to this driver. -+ * Someone should remove this artificial driver limitation in -+ * b44_{read,write}phy. bp->phy_addr itself is fine (and needed). -+ */ -+static int b44_mii_read(struct net_device *dev, int phy_id, int location) -+{ -+ u32 val; -+ struct b44 *bp = netdev_priv(dev); -+ int rc = b44_readphy(bp, location, &val); -+ if (rc) -+ return 0xffffffff; -+ return val; -+} ++/* Clock control magic field values */ ++#define CC_F6_2 0x02 /* A factor of 2 in */ ++#define CC_F6_3 0x03 /* 6-bit fields like */ ++#define CC_F6_4 0x05 /* N1, M1 or M3 */ ++#define CC_F6_5 0x09 ++#define CC_F6_6 0x11 ++#define CC_F6_7 0x21 + -+static void b44_mii_write(struct net_device *dev, int phy_id, int location, -+ int val) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ b44_writephy(bp, location, val); -+} ++#define CC_F5_BIAS 5 /* 5-bit fields get this added */ + -+static int b44_phy_reset(struct b44 *bp) -+{ -+ u32 val; -+ int err; ++#define CC_MC_BYPASS 0x08 ++#define CC_MC_M1 0x04 ++#define CC_MC_M1M2 0x02 ++#define CC_MC_M1M2M3 0x01 ++#define CC_MC_M1M3 0x11 + -+ err = b44_writephy(bp, MII_BMCR, BMCR_RESET); -+ if (err) -+ return err; -+ udelay(100); -+ err = b44_readphy(bp, MII_BMCR, &val); -+ if (!err) { -+ if (val & BMCR_RESET) { -+ printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n", -+ bp->dev->name); -+ err = -ENODEV; -+ } -+ } ++#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ + -+ return 0; -+} ++#endif /* _SBEXTIF_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h +--- linux.old/arch/mips/bcm947xx/include/sbmemc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h 2005-12-15 15:35:31.567254500 +0100 +@@ -0,0 +1,148 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags) -+{ -+ u32 val; ++#ifndef _SBMEMC_H ++#define _SBMEMC_H + -+ bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE); -+ bp->flags |= pause_flags; ++#ifdef _LANGUAGE_ASSEMBLY + -+ val = br32(bp, B44_RXCONFIG); -+ if (pause_flags & B44_FLAG_RX_PAUSE) -+ val |= RXCONFIG_FLOW; -+ else -+ val &= ~RXCONFIG_FLOW; -+ bw32(bp, B44_RXCONFIG, val); ++#define MEMC_CONTROL 0x00 ++#define MEMC_CONFIG 0x04 ++#define MEMC_REFRESH 0x08 ++#define MEMC_BISTSTAT 0x0c ++#define MEMC_MODEBUF 0x10 ++#define MEMC_BKCLS 0x14 ++#define MEMC_PRIORINV 0x18 ++#define MEMC_DRAMTIM 0x1c ++#define MEMC_INTSTAT 0x20 ++#define MEMC_INTMASK 0x24 ++#define MEMC_INTINFO 0x28 ++#define MEMC_NCDLCTL 0x30 ++#define MEMC_RDNCDLCOR 0x34 ++#define MEMC_WRNCDLCOR 0x38 ++#define MEMC_MISCDLYCTL 0x3c ++#define MEMC_DQSGATENCDL 0x40 ++#define MEMC_SPARE 0x44 ++#define MEMC_TPADDR 0x48 ++#define MEMC_TPDATA 0x4c ++#define MEMC_BARRIER 0x50 ++#define MEMC_CORE 0x54 + -+ val = br32(bp, B44_MAC_FLOW); -+ if (pause_flags & B44_FLAG_TX_PAUSE) -+ val |= (MAC_FLOW_PAUSE_ENAB | -+ (0xc0 & MAC_FLOW_RX_HI_WATER)); -+ else -+ val &= ~MAC_FLOW_PAUSE_ENAB; -+ bw32(bp, B44_MAC_FLOW, val); -+} + -+static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) -+{ -+ u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE | -+ B44_FLAG_RX_PAUSE); -+ -+ if (local & ADVERTISE_PAUSE_CAP) { -+ if (local & ADVERTISE_PAUSE_ASYM) { -+ if (remote & LPA_PAUSE_CAP) -+ pause_enab |= (B44_FLAG_TX_PAUSE | -+ B44_FLAG_RX_PAUSE); -+ else if (remote & LPA_PAUSE_ASYM) -+ pause_enab |= B44_FLAG_RX_PAUSE; -+ } else { -+ if (remote & LPA_PAUSE_CAP) -+ pause_enab |= (B44_FLAG_TX_PAUSE | -+ B44_FLAG_RX_PAUSE); -+ } -+ } else if (local & ADVERTISE_PAUSE_ASYM) { -+ if ((remote & LPA_PAUSE_CAP) && -+ (remote & LPA_PAUSE_ASYM)) -+ pause_enab |= B44_FLAG_TX_PAUSE; -+ } ++#else + -+ __b44_set_flow_ctrl(bp, pause_enab); -+} ++/* Sonics side: MEMC core registers */ ++typedef volatile struct sbmemcregs { ++ uint32 control; ++ uint32 config; ++ uint32 refresh; ++ uint32 biststat; ++ uint32 modebuf; ++ uint32 bkcls; ++ uint32 priorinv; ++ uint32 dramtim; ++ uint32 intstat; ++ uint32 intmask; ++ uint32 intinfo; ++ uint32 reserved1; ++ uint32 ncdlctl; ++ uint32 rdncdlcor; ++ uint32 wrncdlcor; ++ uint32 miscdlyctl; ++ uint32 dqsgatencdl; ++ uint32 spare; ++ uint32 tpaddr; ++ uint32 tpdata; ++ uint32 barrier; ++ uint32 core; ++} sbmemcregs_t; + -+static int b44_setup_phy(struct b44 *bp) -+{ -+ u32 val; -+ int err; ++#endif + -+ if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) -+ goto out; -+ if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, -+ val & MII_ALEDCTRL_ALLMSK)) != 0) -+ goto out; -+ if ((err = b44_readphy(bp, B44_MII_TLEDCTRL, &val)) != 0) -+ goto out; -+ if ((err = b44_writephy(bp, B44_MII_TLEDCTRL, -+ val | MII_TLEDCTRL_ENABLE)) != 0) -+ goto out; ++/* MEMC Core Init values (OCP ID 0x80f) */ + -+ if (!(bp->flags & B44_FLAG_FORCE_LINK)) { -+ u32 adv = ADVERTISE_CSMA; ++/* For sdr: */ ++#define MEMC_SD_CONFIG_INIT 0x00048000 ++#define MEMC_SD_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_SD_DRAMTIM3_INIT 0x000754da ++#define MEMC_SD_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_SD_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */ ++#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b ++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */ ++#define MEMC_SD_CONTROL_INIT0 0x00000002 ++#define MEMC_SD_CONTROL_INIT1 0x00000008 ++#define MEMC_SD_CONTROL_INIT2 0x00000004 ++#define MEMC_SD_CONTROL_INIT3 0x00000010 ++#define MEMC_SD_CONTROL_INIT4 0x00000001 ++#define MEMC_SD_MODEBUF_INIT 0x00000000 ++#define MEMC_SD_REFRESH_INIT 0x0000840f + -+ if (bp->flags & B44_FLAG_ADV_10HALF) -+ adv |= ADVERTISE_10HALF; -+ if (bp->flags & B44_FLAG_ADV_10FULL) -+ adv |= ADVERTISE_10FULL; -+ if (bp->flags & B44_FLAG_ADV_100HALF) -+ adv |= ADVERTISE_100HALF; -+ if (bp->flags & B44_FLAG_ADV_100FULL) -+ adv |= ADVERTISE_100FULL; + -+ if (bp->flags & B44_FLAG_PAUSE_AUTO) -+ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; ++/* This is for SDRM8X8X4 */ ++#define MEMC_SDR_INIT 0x0008 ++#define MEMC_SDR_MODE 0x32 ++#define MEMC_SDR_NCDL 0x00020032 ++#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */ + -+ if ((err = b44_writephy(bp, MII_ADVERTISE, adv)) != 0) -+ goto out; -+ if ((err = b44_writephy(bp, MII_BMCR, (BMCR_ANENABLE | -+ BMCR_ANRESTART))) != 0) -+ goto out; -+ } else { -+ u32 bmcr; ++/* For ddr: */ ++#define MEMC_CONFIG_INIT 0x00048000 ++#define MEMC_DRAMTIM2_INIT 0x000754d8 ++#define MEMC_DRAMTIM25_INIT 0x000754d9 ++#define MEMC_RDNCDLCOR_INIT 0x00000000 ++#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */ ++#define MEMC_WRNCDLCOR_INIT 0x49351200 ++#define MEMC_1_WRNCDLCOR_INIT 0x14500200 ++#define MEMC_DQSGATENCDL_INIT 0x00030000 ++#define MEMC_MISCDLYCTL_INIT 0x21061c1b ++#define MEMC_1_MISCDLYCTL_INIT 0x21021400 ++#define MEMC_NCDLCTL_INIT 0x00002001 ++#define MEMC_CONTROL_INIT0 0x00000002 ++#define MEMC_CONTROL_INIT1 0x00000008 ++#define MEMC_MODEBUF_INIT0 0x00004000 ++#define MEMC_CONTROL_INIT2 0x00000010 ++#define MEMC_MODEBUF_INIT1 0x00000100 ++#define MEMC_CONTROL_INIT3 0x00000010 ++#define MEMC_CONTROL_INIT4 0x00000008 ++#define MEMC_REFRESH_INIT 0x0000840f ++#define MEMC_CONTROL_INIT5 0x00000004 ++#define MEMC_MODEBUF_INIT2 0x00000000 ++#define MEMC_CONTROL_INIT6 0x00000010 ++#define MEMC_CONTROL_INIT7 0x00000001 + -+ if ((err = b44_readphy(bp, MII_BMCR, &bmcr)) != 0) -+ goto out; -+ bmcr &= ~(BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100); -+ if (bp->flags & B44_FLAG_100_BASE_T) -+ bmcr |= BMCR_SPEED100; -+ if (bp->flags & B44_FLAG_FULL_DUPLEX) -+ bmcr |= BMCR_FULLDPLX; -+ if ((err = b44_writephy(bp, MII_BMCR, bmcr)) != 0) -+ goto out; + -+ /* Since we will not be negotiating there is no safe way -+ * to determine if the link partner supports flow control -+ * or not. So just disable it completely in this case. -+ */ -+ b44_set_flow_ctrl(bp, 0, 0); -+ } ++/* This is for DDRM16X16X2 */ ++#define MEMC_DDR_INIT 0x0009 ++#define MEMC_DDR_MODE 0x62 ++#define MEMC_DDR_NCDL 0x0005050a ++#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */ + -+out: -+ return err; -+} ++/* mask for sdr/ddr calibration registers */ ++#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff ++#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff ++#define MEMC_DQSGATENCDL_G_MASK 0x000000ff + -+static void b44_stats_update(struct b44 *bp) -+{ -+ unsigned long reg; -+ u32 *val; ++/* masks for miscdlyctl registers */ ++#define MEMC_MISC_SM_MASK 0x30000000 ++#define MEMC_MISC_SM_SHIFT 28 ++#define MEMC_MISC_SD_MASK 0x0f000000 ++#define MEMC_MISC_SD_SHIFT 24 + -+ val = &bp->hw_stats.tx_good_octets; -+ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) { -+ *val++ += br32(bp, reg); -+ } -+ val = &bp->hw_stats.rx_good_octets; -+ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) { -+ *val++ += br32(bp, reg); -+ } -+} ++/* hw threshhold for calculating wr/rd for sdr memc */ ++#define MEMC_CD_THRESHOLD 128 + -+static void b44_link_report(struct b44 *bp) -+{ -+ if (!netif_carrier_ok(bp->dev)) { -+ printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name); -+ } else { -+ printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n", -+ bp->dev->name, -+ (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10, -+ (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half"); -+ -+ printk(KERN_INFO PFX "%s: Flow control is %s for TX and " -+ "%s for RX.\n", -+ bp->dev->name, -+ (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off", -+ (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off"); -+ } -+} ++/* Low bit of init register says if memc is ddr or sdr */ ++#define MEMC_CONFIG_DDR 0x00000001 + -+static void b44_check_phy(struct b44 *bp) -+{ -+ u32 bmsr, aux; ++#endif /* _SBMEMC_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm947xx/include/sbmips.h +--- linux.old/arch/mips/bcm947xx/include/sbmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbmips.h 2005-12-15 16:46:57.616617000 +0100 +@@ -0,0 +1,62 @@ ++/* ++ * Broadcom SiliconBackplane MIPS definitions ++ * ++ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane ++ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits ++ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP ++ * interface. The core revision is stored in the SB ID register in SB ++ * configuration space. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ if (!b44_readphy(bp, MII_BMSR, &bmsr) && -+ !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && -+ (bmsr != 0xffff)) { -+ if (aux & MII_AUXCTRL_SPEED) -+ bp->flags |= B44_FLAG_100_BASE_T; -+ else -+ bp->flags &= ~B44_FLAG_100_BASE_T; -+ if (aux & MII_AUXCTRL_DUPLEX) -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ else -+ bp->flags &= ~B44_FLAG_FULL_DUPLEX; ++#ifndef _SBMIPS_H ++#define _SBMIPS_H + -+ if (!netif_carrier_ok(bp->dev) && -+ (bmsr & BMSR_LSTATUS)) { -+ u32 val = br32(bp, B44_TX_CTRL); -+ u32 local_adv, remote_adv; ++#include + -+ if (bp->flags & B44_FLAG_FULL_DUPLEX) -+ val |= TX_CTRL_DUPLEX; -+ else -+ val &= ~TX_CTRL_DUPLEX; -+ bw32(bp, B44_TX_CTRL, val); -+ -+ if (!(bp->flags & B44_FLAG_FORCE_LINK) && -+ !b44_readphy(bp, MII_ADVERTISE, &local_adv) && -+ !b44_readphy(bp, MII_LPA, &remote_adv)) -+ b44_set_flow_ctrl(bp, local_adv, remote_adv); -+ -+ /* Link now up */ -+ netif_carrier_on(bp->dev); -+ b44_link_report(bp); -+ } else if (netif_carrier_ok(bp->dev) && !(bmsr & BMSR_LSTATUS)) { -+ /* Link now down */ -+ netif_carrier_off(bp->dev); -+ b44_link_report(bp); -+ } ++#ifndef _LANGUAGE_ASSEMBLY + -+ if (bmsr & BMSR_RFAULT) -+ printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n", -+ bp->dev->name); -+ if (bmsr & BMSR_JCD) -+ printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n", -+ bp->dev->name); -+ } -+} ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif /* PAD */ + -+static void b44_timer(unsigned long __opaque) -+{ -+ struct b44 *bp = (struct b44 *) __opaque; ++typedef volatile struct { ++ uint32 corecontrol; ++ uint32 PAD[2]; ++ uint32 biststatus; ++ uint32 PAD[4]; ++ uint32 intstatus; ++ uint32 intmask; ++ uint32 timer; ++} mipsregs_t; + -+ spin_lock_irq(&bp->lock); ++extern uint32 sb_flag(sb_t *sbh); ++extern uint sb_irq(sb_t *sbh); + -+ b44_check_phy(bp); ++extern void BCMINIT(sb_serial_init)(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift)); + -+ b44_stats_update(bp); ++extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap); ++extern void sb_jtagm_disable(void *h); ++extern uint32 jtag_rwreg(void *h, uint32 ir, uint32 dr); ++extern void BCMINIT(sb_mips_init)(sb_t *sbh); ++extern uint32 BCMINIT(sb_mips_clock)(sb_t *sbh); ++extern bool BCMINIT(sb_mips_setclock)(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock); ++extern void BCMINIT(enable_pfc)(uint32 mode); ++extern uint32 BCMINIT(sb_memc_get_ncdl)(sb_t *sbh); + -+ spin_unlock_irq(&bp->lock); + -+ bp->timer.expires = jiffies + HZ; -+ add_timer(&bp->timer); -+} ++#endif /* _LANGUAGE_ASSEMBLY */ + -+static void b44_tx(struct b44 *bp) -+{ -+ u32 cur, cons; ++#endif /* _SBMIPS_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h +--- linux.old/arch/mips/bcm947xx/include/sbpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h 2005-12-15 15:35:36.795581250 +0100 +@@ -0,0 +1,122 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions. ++ * ++ * $Id$ ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ */ + -+ cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK; -+ cur /= sizeof(struct dma_desc); ++#ifndef _SBPCI_H ++#define _SBPCI_H + -+ /* XXX needs updating when NETIF_F_SG is supported */ -+ for (cons = bp->tx_cons; cons != cur; cons = NEXT_TX(cons)) { -+ struct ring_info *rp = &bp->tx_buffers[cons]; -+ struct sk_buff *skb = rp->skb; ++/* cpp contortions to concatenate w/arg prescan */ ++#ifndef PAD ++#define _PADLINE(line) pad ## line ++#define _XSTR(line) _PADLINE(line) ++#define PAD _XSTR(__LINE__) ++#endif + -+ if (unlikely(skb == NULL)) -+ BUG(); ++/* Sonics side: PCI core and host control registers */ ++typedef struct sbpciregs { ++ uint32 control; /* PCI control */ ++ uint32 PAD[3]; ++ uint32 arbcontrol; /* PCI arbiter control */ ++ uint32 PAD[3]; ++ uint32 intstatus; /* Interrupt status */ ++ uint32 intmask; /* Interrupt mask */ ++ uint32 sbtopcimailbox; /* Sonics to PCI mailbox */ ++ uint32 PAD[9]; ++ uint32 bcastaddr; /* Sonics broadcast address */ ++ uint32 bcastdata; /* Sonics broadcast data */ ++ uint32 PAD[2]; ++ uint32 gpioin; /* ro: gpio input (>=rev2) */ ++ uint32 gpioout; /* rw: gpio output (>=rev2) */ ++ uint32 gpioouten; /* rw: gpio output enable (>= rev2) */ ++ uint32 gpiocontrol; /* rw: gpio control (>= rev2) */ ++ uint32 PAD[36]; ++ uint32 sbtopci0; /* Sonics to PCI translation 0 */ ++ uint32 sbtopci1; /* Sonics to PCI translation 1 */ ++ uint32 sbtopci2; /* Sonics to PCI translation 2 */ ++ uint32 PAD[445]; ++ uint16 sprom[36]; /* SPROM shadow Area */ ++ uint32 PAD[46]; ++} sbpciregs_t; + -+ pci_unmap_single(bp->pdev, -+ pci_unmap_addr(rp, mapping), -+ skb->len, -+ PCI_DMA_TODEVICE); -+ rp->skb = NULL; -+ dev_kfree_skb_irq(skb); -+ } ++/* PCI control */ ++#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */ ++#define PCI_RST 0x02 /* Value driven out to pin */ ++#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */ ++#define PCI_CLK 0x08 /* Gate for clock driven out to pin */ + -+ bp->tx_cons = cons; -+ if (netif_queue_stopped(bp->dev) && -+ TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH) -+ netif_wake_queue(bp->dev); ++/* PCI arbiter control */ ++#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */ ++#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */ ++#define PCI_PARKID_MASK 0x06 /* Selects which agent is parked on an idle bus */ ++#define PCI_PARKID_SHIFT 1 ++#define PCI_PARKID_LAST 0 /* Last requestor */ ++#define PCI_PARKID_4710 1 /* 4710 */ ++#define PCI_PARKID_EXTREQ0 2 /* External requestor 0 */ ++#define PCI_PARKID_EXTREQ1 3 /* External requestor 1 */ + -+ bw32(bp, B44_GPTIMER, 0); -+} ++/* Interrupt status/mask */ ++#define PCI_INTA 0x01 /* PCI INTA# is asserted */ ++#define PCI_INTB 0x02 /* PCI INTB# is asserted */ ++#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */ ++#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */ ++#define PCI_PME 0x10 /* PCI PME# is asserted */ + -+/* Works like this. This chip writes a 'struct rx_header" 30 bytes -+ * before the DMA address you give it. So we allocate 30 more bytes -+ * for the RX buffer, DMA map all of it, skb_reserve the 30 bytes, then -+ * point the chip at 30 bytes past where the rx_header will go. -+ */ -+static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) -+{ -+ struct dma_desc *dp; -+ struct ring_info *src_map, *map; -+ struct rx_header *rh; -+ struct sk_buff *skb; -+ dma_addr_t mapping; -+ int dest_idx; -+ u32 ctrl; -+ -+ src_map = NULL; -+ if (src_idx >= 0) -+ src_map = &bp->rx_buffers[src_idx]; -+ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1); -+ map = &bp->rx_buffers[dest_idx]; -+ skb = dev_alloc_skb(RX_PKT_BUF_SZ); -+ if (skb == NULL) -+ return -ENOMEM; -+ -+ mapping = pci_map_single(bp->pdev, skb->data, -+ RX_PKT_BUF_SZ, -+ PCI_DMA_FROMDEVICE); -+ -+ /* Hardware bug work-around, the chip is unable to do PCI DMA -+ to/from anything above 1GB :-( */ -+ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) { -+ /* Sigh... */ -+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); -+ dev_kfree_skb_any(skb); -+ skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA); -+ if (skb == NULL) -+ return -ENOMEM; -+ mapping = pci_map_single(bp->pdev, skb->data, -+ RX_PKT_BUF_SZ, -+ PCI_DMA_FROMDEVICE); -+ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) { -+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); -+ dev_kfree_skb_any(skb); -+ return -ENOMEM; -+ } -+ } ++/* (General) PCI/SB mailbox interrupts, two bits per pci function */ ++#define MAILBOX_F0_0 0x100 /* function 0, int 0 */ ++#define MAILBOX_F0_1 0x200 /* function 0, int 1 */ ++#define MAILBOX_F1_0 0x400 /* function 1, int 0 */ ++#define MAILBOX_F1_1 0x800 /* function 1, int 1 */ ++#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */ ++#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */ ++#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */ ++#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */ + -+ skb->dev = bp->dev; -+ skb_reserve(skb, bp->rx_offset); ++/* Sonics broadcast address */ ++#define BCAST_ADDR_MASK 0xff /* Broadcast register address */ + -+ rh = (struct rx_header *) -+ (skb->data - bp->rx_offset); -+ rh->len = 0; -+ rh->flags = 0; ++/* Sonics to PCI translation types */ ++#define SBTOPCI0_MASK 0xfc000000 ++#define SBTOPCI1_MASK 0xfc000000 ++#define SBTOPCI2_MASK 0xc0000000 ++#define SBTOPCI_MEM 0 ++#define SBTOPCI_IO 1 ++#define SBTOPCI_CFG0 2 ++#define SBTOPCI_CFG1 3 ++#define SBTOPCI_PREF 0x4 /* prefetch enable */ ++#define SBTOPCI_BURST 0x8 /* burst enable */ ++#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */ ++#define SBTOPCI_RC_READ 0x00 /* memory read */ ++#define SBTOPCI_RC_READLINE 0x10 /* memory read line */ ++#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */ ++ ++/* PCI core index in SROM shadow area */ ++#define SRSH_PI_OFFSET 0 /* first word */ ++#define SRSH_PI_MASK 0xf000 /* bit 15:12 */ ++#define SRSH_PI_SHIFT 12 /* bit 15:12 */ + -+ map->skb = skb; -+ pci_unmap_addr_set(map, mapping, mapping); ++/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */ ++#define cap_list rsvd_a[0] ++#define bar0_window dev_dep[0x80 - 0x40] ++#define bar1_window dev_dep[0x84 - 0x40] ++#define sprom_control dev_dep[0x88 - 0x40] + -+ if (src_map != NULL) -+ src_map->skb = NULL; ++#ifndef _LANGUAGE_ASSEMBLY + -+ ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset)); -+ if (dest_idx == (B44_RX_RING_SIZE - 1)) -+ ctrl |= DESC_CTRL_EOT; ++extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len); ++extern void sbpci_ban(uint16 core); ++extern int sbpci_init(sb_t *sbh); ++extern void sbpci_check(sb_t *sbh); + -+ dp = &bp->rx_ring[dest_idx]; -+ dp->ctrl = cpu_to_le32(ctrl); -+ dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset); ++#endif /* !_LANGUAGE_ASSEMBLY */ + -+ return RX_PKT_BUF_SZ; -+} ++#endif /* _SBPCI_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h +--- linux.old/arch/mips/bcm947xx/include/sbsdram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h 2005-12-15 15:35:40.175792500 +0100 +@@ -0,0 +1,75 @@ ++/* ++ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) -+{ -+ struct dma_desc *src_desc, *dest_desc; -+ struct ring_info *src_map, *dest_map; -+ struct rx_header *rh; -+ int dest_idx; -+ u32 ctrl; -+ -+ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1); -+ dest_desc = &bp->rx_ring[dest_idx]; -+ dest_map = &bp->rx_buffers[dest_idx]; -+ src_desc = &bp->rx_ring[src_idx]; -+ src_map = &bp->rx_buffers[src_idx]; -+ -+ dest_map->skb = src_map->skb; -+ rh = (struct rx_header *) src_map->skb->data; -+ rh->len = 0; -+ rh->flags = 0; -+ pci_unmap_addr_set(dest_map, mapping, -+ pci_unmap_addr(src_map, mapping)); -+ -+ ctrl = src_desc->ctrl; -+ if (dest_idx == (B44_RX_RING_SIZE - 1)) -+ ctrl |= cpu_to_le32(DESC_CTRL_EOT); -+ else -+ ctrl &= cpu_to_le32(~DESC_CTRL_EOT); ++#ifndef _SBSDRAM_H ++#define _SBSDRAM_H + -+ dest_desc->ctrl = ctrl; -+ dest_desc->addr = src_desc->addr; -+ src_map->skb = NULL; ++#ifndef _LANGUAGE_ASSEMBLY + -+ pci_dma_sync_single_for_device(bp->pdev, src_desc->addr, -+ RX_PKT_BUF_SZ, -+ PCI_DMA_FROMDEVICE); -+} ++/* Sonics side: SDRAM core registers */ ++typedef volatile struct sbsdramregs { ++ uint32 initcontrol; /* Generates external SDRAM initialization sequence */ ++ uint32 config; /* Initializes external SDRAM mode register */ ++ uint32 refresh; /* Controls external SDRAM refresh rate */ ++ uint32 pad1; ++ uint32 pad2; ++} sbsdramregs_t; + -+static int b44_rx(struct b44 *bp, int budget) -+{ -+ int received; -+ u32 cons, prod; -+ -+ received = 0; -+ prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK; -+ prod /= sizeof(struct dma_desc); -+ cons = bp->rx_cons; -+ -+ while (cons != prod && budget > 0) { -+ struct ring_info *rp = &bp->rx_buffers[cons]; -+ struct sk_buff *skb = rp->skb; -+ dma_addr_t map = pci_unmap_addr(rp, mapping); -+ struct rx_header *rh; -+ u16 len; -+ -+ pci_dma_sync_single_for_cpu(bp->pdev, map, -+ RX_PKT_BUF_SZ, -+ PCI_DMA_FROMDEVICE); -+ rh = (struct rx_header *) skb->data; -+ len = cpu_to_le16(rh->len); -+ if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) || -+ (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) { -+ drop_it: -+ b44_recycle_rx(bp, cons, bp->rx_prod); -+ drop_it_no_recycle: -+ bp->stats.rx_dropped++; -+ goto next_pkt; -+ } ++#endif + -+ if (len == 0) { -+ int i = 0; ++/* SDRAM initialization control (initcontrol) register bits */ ++#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */ ++#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */ ++#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */ ++#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */ ++#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */ ++#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */ ++#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */ ++#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */ ++#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */ ++#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */ ++#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */ ++#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */ ++#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */ + -+ do { -+ udelay(2); -+ barrier(); -+ len = cpu_to_le16(rh->len); -+ } while (len == 0 && i++ < 5); -+ if (len == 0) -+ goto drop_it; -+ } ++/* SDRAM configuration (config) register bits */ ++#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */ ++#define SDRAM_BURST8 0x0001 /* Use burst of 8 */ ++#define SDRAM_BURST4 0x0002 /* Use burst of 4 */ ++#define SDRAM_BURST2 0x0003 /* Use burst of 2 */ ++#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */ ++#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */ + -+ /* Omit CRC. */ -+ len -= 4; -+ -+ if (len > RX_COPY_THRESHOLD) { -+ int skb_size; -+ skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); -+ if (skb_size < 0) -+ goto drop_it; -+ pci_unmap_single(bp->pdev, map, -+ skb_size, PCI_DMA_FROMDEVICE); -+ /* Leave out rx_header */ -+ skb_put(skb, len+bp->rx_offset); -+ skb_pull(skb,bp->rx_offset); -+ } else { -+ struct sk_buff *copy_skb; ++/* SDRAM refresh control (refresh) register bits */ ++#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */ ++#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */ + -+ b44_recycle_rx(bp, cons, bp->rx_prod); -+ copy_skb = dev_alloc_skb(len + 2); -+ if (copy_skb == NULL) -+ goto drop_it_no_recycle; ++/* SDRAM Core default Init values (OCP ID 0x803) */ ++#define SDRAM_INIT MEM4MX16X2 ++#define SDRAM_CONFIG SDRAM_BURSTFULL ++#define SDRAM_REFRESH SDRAM_REF(0x40) + -+ copy_skb->dev = bp->dev; -+ skb_reserve(copy_skb, 2); -+ skb_put(copy_skb, len); -+ /* DMA sync done above, copy just the actual packet */ -+ memcpy(copy_skb->data, skb->data+bp->rx_offset, len); ++#define MEM1MX16 0x009 /* 2 MB */ ++#define MEM1MX16X2 0x409 /* 4 MB */ ++#define MEM2MX8X2 0x809 /* 4 MB */ ++#define MEM2MX8X4 0xc09 /* 8 MB */ ++#define MEM2MX32 0x439 /* 8 MB */ ++#define MEM4MX16 0x019 /* 8 MB */ ++#define MEM4MX16X2 0x419 /* 16 MB */ ++#define MEM8MX8X2 0x819 /* 16 MB */ ++#define MEM8MX16 0x829 /* 16 MB */ ++#define MEM4MX32 0x429 /* 16 MB */ ++#define MEM8MX8X4 0xc19 /* 32 MB */ ++#define MEM8MX16X2 0xc29 /* 32 MB */ + -+ skb = copy_skb; -+ } -+ skb->ip_summed = CHECKSUM_NONE; -+ skb->protocol = eth_type_trans(skb, bp->dev); -+ netif_receive_skb(skb); -+ bp->dev->last_rx = jiffies; -+ received++; -+ budget--; -+ next_pkt: -+ bp->rx_prod = (bp->rx_prod + 1) & -+ (B44_RX_RING_SIZE - 1); -+ cons = (cons + 1) & (B44_RX_RING_SIZE - 1); -+ } ++#endif /* _SBSDRAM_H */ +diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h +--- linux.old/arch/mips/bcm947xx/include/sbutils.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h 2005-12-15 16:00:47.404550500 +0100 +@@ -0,0 +1,136 @@ ++/* ++ * Misc utility routines for accessing chip-specific features ++ * of Broadcom HNBU SiliconBackplane-based chips. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+ bp->rx_cons = cons; -+ bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc)); ++#ifndef _sbutils_h_ ++#define _sbutils_h_ + -+ return received; -+} ++/* ++ * Datastructure to export all chip specific common variables ++ * public (read-only) portion of sbutils handle returned by ++ * sb_attach()/sb_kattach() ++*/ + -+static int b44_poll(struct net_device *netdev, int *budget) -+{ -+ struct b44 *bp = netdev_priv(netdev); -+ int done; ++struct sb_pub { + -+ spin_lock_irq(&bp->lock); ++ uint bustype; /* SB_BUS, PCI_BUS */ ++ uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE*/ ++ uint buscorerev; /* buscore rev */ ++ uint buscoreidx; /* buscore index */ ++ int ccrev; /* chip common core rev */ ++ uint boardtype; /* board type */ ++ uint boardvendor; /* board vendor */ ++ uint chip; /* chip number */ ++ uint chiprev; /* chip revision */ ++ uint chippkg; /* chip package option */ ++ uint sonicsrev; /* sonics backplane rev */ ++}; + -+ if (bp->istat & (ISTAT_TX | ISTAT_TO)) { -+ /* spin_lock(&bp->tx_lock); */ -+ b44_tx(bp); -+ /* spin_unlock(&bp->tx_lock); */ -+ } -+ spin_unlock_irq(&bp->lock); ++typedef const struct sb_pub sb_t; + -+ done = 1; -+ if (bp->istat & ISTAT_RX) { -+ int orig_budget = *budget; -+ int work_done; ++/* ++ * Many of the routines below take an 'sbh' handle as their first arg. ++ * Allocate this by calling sb_attach(). Free it by calling sb_detach(). ++ * At any one time, the sbh is logically focused on one particular sb core ++ * (the "current core"). ++ * Use sb_setcore() or sb_setcoreidx() to change the association to another core. ++ */ + -+ if (orig_budget > netdev->quota) -+ orig_budget = netdev->quota; ++/* exported externs */ ++extern sb_t * BCMINIT(sb_attach)(uint pcidev, osl_t *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); ++extern sb_t * BCMINIT(sb_kattach)(void); ++extern void sb_detach(sb_t *sbh); ++extern uint BCMINIT(sb_chip)(sb_t *sbh); ++extern uint BCMINIT(sb_chiprev)(sb_t *sbh); ++extern uint BCMINIT(sb_chipcrev)(sb_t *sbh); ++extern uint BCMINIT(sb_chippkg)(sb_t *sbh); ++extern uint BCMINIT(sb_pcirev)(sb_t *sbh); ++extern bool BCMINIT(sb_war16165)(sb_t *sbh); ++extern uint BCMINIT(sb_boardvendor)(sb_t *sbh); ++extern uint BCMINIT(sb_boardtype)(sb_t *sbh); ++extern uint sb_bus(sb_t *sbh); ++extern uint sb_buscoretype(sb_t *sbh); ++extern uint sb_buscorerev(sb_t *sbh); ++extern uint sb_corelist(sb_t *sbh, uint coreid[]); ++extern uint sb_coreid(sb_t *sbh); ++extern uint sb_coreidx(sb_t *sbh); ++extern uint sb_coreunit(sb_t *sbh); ++extern uint sb_corevendor(sb_t *sbh); ++extern uint sb_corerev(sb_t *sbh); ++extern void *sb_osh(sb_t *sbh); ++extern void *sb_coreregs(sb_t *sbh); ++extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val); ++extern bool sb_iscoreup(sb_t *sbh); ++extern void *sb_setcoreidx(sb_t *sbh, uint coreidx); ++extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit); ++extern int sb_corebist(sb_t *sbh, uint coreid, uint coreunit); ++extern void sb_commit(sb_t *sbh); ++extern uint32 sb_base(uint32 admatch); ++extern uint32 sb_size(uint32 admatch); ++extern void sb_core_reset(sb_t *sbh, uint32 bits); ++extern void sb_core_tofixup(sb_t *sbh); ++extern void sb_core_disable(sb_t *sbh, uint32 bits); ++extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m); ++extern uint32 sb_clock(sb_t *sbh); ++extern void sb_pci_setup(sb_t *sbh, uint coremask); ++extern void sb_watchdog(sb_t *sbh, uint ticks); ++extern void *sb_gpiosetcore(sb_t *sbh); ++extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioin(sb_t *sbh); ++extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority); ++extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val); ++extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority); ++extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority); ++ ++extern void sb_clkctl_init(sb_t *sbh); ++extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh); ++extern bool sb_clkctl_clk(sb_t *sbh, uint mode); ++extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on); ++extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, ++ void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg); ++extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to); ++extern void sb_corepciid(sb_t *sbh, uint16 *pcivendor, uint16 *pcidevice, ++ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif); ++extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val); ++ ++ ++ ++/* ++* Build device path. Path size must be >= SB_DEVPATH_BUFSZ. ++* The returned path is NULL terminated and has trailing '/'. ++* Return 0 on success, nonzero otherwise. ++*/ ++extern int sb_devpath(sb_t *sbh, char *path, int size); + -+ work_done = b44_rx(bp, orig_budget); ++/* clkctl xtal what flags */ ++#define XTAL 0x1 /* primary crystal oscillator (2050) */ ++#define PLL 0x2 /* main chip pll */ + -+ *budget -= work_done; -+ netdev->quota -= work_done; ++/* clkctl clk mode */ ++#define CLK_FAST 0 /* force fast (pll) clock */ ++#define CLK_DYNAMIC 2 /* enable dynamic clock control */ + -+ if (work_done >= orig_budget) -+ done = 0; -+ } + -+ if (bp->istat & ISTAT_ERRORS) { -+ spin_lock_irq(&bp->lock); -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ netif_wake_queue(bp->dev); -+ spin_unlock_irq(&bp->lock); -+ done = 1; -+ } ++/* GPIO usage priorities */ ++#define GPIO_DRV_PRIORITY 0 ++#define GPIO_APP_PRIORITY 1 + -+ if (done) { -+ netif_rx_complete(netdev); -+ b44_enable_ints(bp); -+ } ++/* device path */ ++#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */ + -+ return (done ? 0 : 1); -+} ++#endif /* _sbutils_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h +--- linux.old/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/sflash.h 2005-12-15 16:49:23.001703000 +0100 +@@ -0,0 +1,36 @@ ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ struct net_device *dev = dev_id; -+ struct b44 *bp = netdev_priv(dev); -+ unsigned long flags; -+ u32 istat, imask; -+ int handled = 0; ++#ifndef _sflash_h_ ++#define _sflash_h_ + -+ spin_lock_irqsave(&bp->lock, flags); ++#include ++#include + -+ istat = br32(bp, B44_ISTAT); -+ imask = br32(bp, B44_IMASK); ++struct sflash { ++ uint blocksize; /* Block size */ ++ uint numblocks; /* Number of blocks */ ++ uint32 type; /* Type */ ++ uint size; /* Total size in bytes */ ++}; + -+ /* ??? What the fuck is the purpose of the interrupt mask -+ * ??? register if we have to mask it out by hand anyways? -+ */ -+ istat &= imask; -+ if (istat) { -+ handled = 1; -+ if (netif_rx_schedule_prep(dev)) { -+ /* NOTE: These writes are posted by the readback of -+ * the ISTAT register below. -+ */ -+ bp->istat = istat; -+ __b44_disable_ints(bp); -+ __netif_rx_schedule(dev); -+ } else { -+ printk(KERN_ERR PFX "%s: Error, poll already scheduled\n", -+ dev->name); -+ } ++/* Utility functions */ ++extern int sflash_poll(chipcregs_t *cc, uint offset); ++extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf); ++extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern int sflash_erase(chipcregs_t *cc, uint offset); ++extern int sflash_commit(chipcregs_t *cc, uint offset, uint len, const uchar *buf); ++extern struct sflash * sflash_init(chipcregs_t *cc); + -+ bw32(bp, B44_ISTAT, istat); -+ br32(bp, B44_ISTAT); -+ } -+ spin_unlock_irqrestore(&bp->lock, flags); -+ return IRQ_RETVAL(handled); -+} ++#endif /* _sflash_h_ */ +diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h +--- linux.old/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h 2005-12-15 15:35:49.220357750 +0100 +@@ -0,0 +1,33 @@ ++/* ++ * TRX image file header format. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+static void b44_tx_timeout(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); ++#include + -+ printk(KERN_ERR PFX "%s: transmit timed out, resetting\n", -+ dev->name); ++#define TRX_MAGIC 0x30524448 /* "HDR0" */ ++#define TRX_VERSION 1 ++#define TRX_MAX_LEN 0x3A0000 ++#define TRX_NO_HEADER 1 /* Do not write TRX header */ ++#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ ++#define TRX_MAX_OFFSET 3 + -+ spin_lock_irq(&bp->lock); ++struct trx_header { ++ uint32 magic; /* "HDR0" */ ++ uint32 len; /* Length of file including header */ ++ uint32 crc32; /* 32-bit CRC from flag_version to end of file */ ++ uint32 flag_version; /* 0:15 flags, 16:31 version */ ++ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ ++}; + -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp); ++/* Compatibility */ ++typedef struct trx_header TRXHDR, *PTRXHDR; +diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h +--- linux.old/arch/mips/bcm947xx/include/typedefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h 2005-12-15 15:35:52.436558750 +0100 +@@ -0,0 +1,326 @@ ++/* ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * $Id$ ++ */ + -+ spin_unlock_irq(&bp->lock); ++#ifndef _TYPEDEFS_H_ ++#define _TYPEDEFS_H_ + -+ b44_enable_ints(bp); + -+ netif_wake_queue(dev); -+} ++/* Define 'SITE_TYPEDEFS' in the compile to include a site specific ++ * typedef file "site_typedefs.h". ++ * ++ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs" ++ * section of this file makes inferences about the compile environment ++ * based on defined symbols and possibly compiler pragmas. ++ * ++ * Following these two sections is the "Default Typedefs" ++ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is ++ * defined. This section has a default set of typedefs and a few ++ * proprocessor symbols (TRUE, FALSE, NULL, ...). ++ */ + -+static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ struct sk_buff *bounce_skb; -+ dma_addr_t mapping; -+ u32 len, entry, ctrl; -+ -+ len = skb->len; -+ spin_lock_irq(&bp->lock); -+ -+ /* This is a hard error, log it. */ -+ if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) { -+ netif_stop_queue(dev); -+ spin_unlock_irq(&bp->lock); -+ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", -+ dev->name); -+ return 1; -+ } ++#ifdef SITE_TYPEDEFS + -+ mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); -+ if(mapping+len > B44_DMA_MASK) { -+ /* Chip can't handle DMA to/from >1GB, use bounce buffer */ -+ pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); -+ -+ bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ, -+ GFP_ATOMIC|GFP_DMA); -+ if (!bounce_skb) -+ return NETDEV_TX_BUSY; -+ -+ mapping = pci_map_single(bp->pdev, bounce_skb->data, -+ len, PCI_DMA_TODEVICE); -+ if(mapping+len > B44_DMA_MASK) { -+ pci_unmap_single(bp->pdev, mapping, -+ len, PCI_DMA_TODEVICE); -+ dev_kfree_skb_any(bounce_skb); -+ return NETDEV_TX_BUSY; -+ } ++/******************************************************************************* ++ * Site Specific Typedefs ++ *******************************************************************************/ + -+ memcpy(skb_put(bounce_skb, len), skb->data, skb->len); -+ dev_kfree_skb_any(skb); -+ skb = bounce_skb; -+ } ++#include "site_typedefs.h" + -+ entry = bp->tx_prod; -+ bp->tx_buffers[entry].skb = skb; -+ pci_unmap_addr_set(&bp->tx_buffers[entry], mapping, mapping); ++#else + -+ ctrl = (len & DESC_CTRL_LEN); -+ ctrl |= DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF; -+ if (entry == (B44_TX_RING_SIZE - 1)) -+ ctrl |= DESC_CTRL_EOT; ++/******************************************************************************* ++ * Inferred Typedefs ++ *******************************************************************************/ + -+ bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl); -+ bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset); ++/* Infer the compile environment based on preprocessor symbols and pramas. ++ * Override type definitions as needed, and include configuration dependent ++ * header files to define types. ++ */ + -+ entry = NEXT_TX(entry); ++#ifdef __cplusplus + -+ bp->tx_prod = entry; ++#define TYPEDEF_BOOL ++#ifndef FALSE ++#define FALSE false ++#endif ++#ifndef TRUE ++#define TRUE true ++#endif + -+ wmb(); ++#else /* ! __cplusplus */ + -+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); -+ if (bp->flags & B44_FLAG_BUGGY_TXPTR) -+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc)); -+ if (bp->flags & B44_FLAG_REORDER_BUG) -+ br32(bp, B44_DMATX_PTR); ++#if defined(_WIN32) + -+ if (TX_BUFFS_AVAIL(bp) < 1) -+ netif_stop_queue(dev); ++#define TYPEDEF_BOOL ++typedef unsigned char bool; /* consistent w/BOOL */ + -+ spin_unlock_irq(&bp->lock); ++#endif /* _WIN32 */ + -+ dev->trans_start = jiffies; ++#endif /* ! __cplusplus */ + -+ return 0; -+} ++/* use the Windows ULONG_PTR type when compiling for 64 bit */ ++#if defined(_WIN64) ++#include ++#define TYPEDEF_UINTPTR ++typedef ULONG_PTR uintptr; ++#endif + -+static int b44_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ struct b44 *bp = netdev_priv(dev); ++#ifdef _HNDRTE_ ++typedef long unsigned int size_t; ++#endif + -+ if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU) -+ return -EINVAL; ++#ifdef _MSC_VER /* Microsoft C */ ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++typedef signed __int64 int64; ++typedef unsigned __int64 uint64; ++#endif + -+ if (!netif_running(dev)) { -+ /* We'll just catch it later when the -+ * device is up'd. -+ */ -+ dev->mtu = new_mtu; -+ return 0; -+ } ++#if defined(MACOSX) && defined(KERNEL) ++#define TYPEDEF_BOOL ++#endif + -+ spin_lock_irq(&bp->lock); -+ b44_halt(bp); -+ dev->mtu = new_mtu; -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ spin_unlock_irq(&bp->lock); + -+ b44_enable_ints(bp); -+ -+ return 0; -+} ++#if defined(linux) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#define TYPEDEF_ULONG ++#endif + -+/* Free up pending packets in all rx/tx rings. -+ * -+ * The chip has been shut down and the driver detached from -+ * the networking, so no interrupts or new tx packets will -+ * end up in the driver. bp->lock is not held and we are not -+ * in an interrupt context and thus may sleep. -+ */ -+static void b44_free_rings(struct b44 *bp) -+{ -+ struct ring_info *rp; -+ int i; ++#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) ++#define TYPEDEF_UINT ++#define TYPEDEF_USHORT ++#endif + -+ for (i = 0; i < B44_RX_RING_SIZE; i++) { -+ rp = &bp->rx_buffers[i]; + -+ if (rp->skb == NULL) -+ continue; -+ pci_unmap_single(bp->pdev, -+ pci_unmap_addr(rp, mapping), -+ RX_PKT_BUF_SZ, -+ PCI_DMA_FROMDEVICE); -+ dev_kfree_skb_any(rp->skb); -+ rp->skb = NULL; -+ } ++/* Do not support the (u)int64 types with strict ansi for GNU C */ ++#if defined(__GNUC__) && defined(__STRICT_ANSI__) ++#define TYPEDEF_INT64 ++#define TYPEDEF_UINT64 ++#endif + -+ /* XXX needs changes once NETIF_F_SG is set... */ -+ for (i = 0; i < B44_TX_RING_SIZE; i++) { -+ rp = &bp->tx_buffers[i]; ++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode ++ * for singned or unsigned */ ++#if defined(__ICL) + -+ if (rp->skb == NULL) -+ continue; -+ pci_unmap_single(bp->pdev, -+ pci_unmap_addr(rp, mapping), -+ rp->skb->len, -+ PCI_DMA_TODEVICE); -+ dev_kfree_skb_any(rp->skb); -+ rp->skb = NULL; -+ } -+} ++#define TYPEDEF_INT64 + -+/* Initialize tx/rx rings for packet processing. -+ * -+ * The chip has been shut down and the driver detached from -+ * the networking, so no interrupts or new tx packets will -+ * end up in the driver. bp->lock is not held and we are not -+ * in an interrupt context and thus may sleep. -+ */ -+static void b44_init_rings(struct b44 *bp) -+{ -+ int i; ++#if defined(__STDC__) ++#define TYPEDEF_UINT64 ++#endif + -+ b44_free_rings(bp); ++#endif /* __ICL */ + -+ memset(bp->rx_ring, 0, B44_RX_RING_BYTES); -+ memset(bp->tx_ring, 0, B44_TX_RING_BYTES); + -+ for (i = 0; i < bp->rx_pending; i++) { -+ if (b44_alloc_rx_skb(bp, -1, i) < 0) -+ break; -+ } -+} ++#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_) && !defined(_HNDRTE_) && !defined(_MINOSL_) + -+/* -+ * Must not be invoked with interrupt sources disabled and -+ * the hardware shutdown down. -+ */ -+static void b44_free_consistent(struct b44 *bp) -+{ -+ if (bp->rx_buffers) { -+ kfree(bp->rx_buffers); -+ bp->rx_buffers = NULL; -+ } -+ if (bp->tx_buffers) { -+ kfree(bp->tx_buffers); -+ bp->tx_buffers = NULL; -+ } -+ if (bp->rx_ring) { -+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, -+ bp->rx_ring, bp->rx_ring_dma); -+ bp->rx_ring = NULL; -+ } -+ if (bp->tx_ring) { -+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, -+ bp->tx_ring, bp->tx_ring_dma); -+ bp->tx_ring = NULL; -+ } -+} ++/* pick up ushort & uint from standard types.h */ ++#if defined(linux) && defined(__KERNEL__) + -+/* -+ * Must not be invoked with interrupt sources disabled and -+ * the hardware shutdown down. Can sleep. -+ */ -+static int b44_alloc_consistent(struct b44 *bp) -+{ -+ int size; ++#include /* sys/types.h and linux/types.h are oil and water */ + -+ size = B44_RX_RING_SIZE * sizeof(struct ring_info); -+ bp->rx_buffers = kmalloc(size, GFP_KERNEL); -+ if (!bp->rx_buffers) -+ goto out_err; -+ memset(bp->rx_buffers, 0, size); ++#else + -+ size = B44_TX_RING_SIZE * sizeof(struct ring_info); -+ bp->tx_buffers = kmalloc(size, GFP_KERNEL); -+ if (!bp->tx_buffers) -+ goto out_err; -+ memset(bp->tx_buffers, 0, size); ++#include + -+ size = DMA_TABLE_BYTES; -+ bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma); -+ if (!bp->rx_ring) -+ goto out_err; ++#endif + -+ bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma); -+ if (!bp->tx_ring) -+ goto out_err; ++#endif /* !_WIN32 && !PMON && !_CFE_ && !_HNDRTE_ && !_MINOSL_ */ + -+ return 0; ++#if defined(MACOSX) && defined(KERNEL) ++#include ++#endif + -+out_err: -+ b44_free_consistent(bp); -+ return -ENOMEM; -+} + -+/* bp->lock is held. */ -+static void b44_clear_stats(struct b44 *bp) -+{ -+ unsigned long reg; ++/* use the default typedefs in the next section of this file */ ++#define USE_TYPEDEF_DEFAULTS + -+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); -+ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) -+ br32(bp, reg); -+ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) -+ br32(bp, reg); -+} ++#endif /* SITE_TYPEDEFS */ + -+/* bp->lock is held. */ -+static void b44_chip_reset(struct b44 *bp) -+{ -+ if (ssb_is_core_up(bp)) { -+ bw32(bp, B44_RCV_LAZY, 0); -+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); -+ b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1); -+ bw32(bp, B44_DMATX_CTRL, 0); -+ bp->tx_prod = bp->tx_cons = 0; -+ if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) { -+ b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE, -+ 100, 0); -+ } -+ bw32(bp, B44_DMARX_CTRL, 0); -+ bp->rx_prod = bp->rx_cons = 0; -+ } else { -+ ssb_pci_setup(bp, (bp->core_unit == 0 ? -+ SBINTVEC_ENET0 : -+ SBINTVEC_ENET1)); -+ } + -+ ssb_core_reset(bp); ++/******************************************************************************* ++ * Default Typedefs ++ *******************************************************************************/ + -+ b44_clear_stats(bp); ++#ifdef USE_TYPEDEF_DEFAULTS ++#undef USE_TYPEDEF_DEFAULTS + -+ /* Make PHY accessible. */ -+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ (0x0d & MDIO_CTRL_MAXF_MASK))); -+ br32(bp, B44_MDIO_CTRL); ++#ifndef TYPEDEF_BOOL ++typedef /*@abstract@*/ unsigned char bool; ++#endif + -+ if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { -+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL); -+ br32(bp, B44_ENET_CTRL); -+ bp->flags &= ~B44_FLAG_INTERNAL_PHY; -+ } else { -+ u32 val = br32(bp, B44_DEVCTRL); ++/*----------------------- define uchar, ushort, uint, ulong ------------------*/ + -+ if (val & DEVCTRL_EPR) { -+ bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR)); -+ br32(bp, B44_DEVCTRL); -+ udelay(100); -+ } -+ bp->flags |= B44_FLAG_INTERNAL_PHY; -+ } -+} ++#ifndef TYPEDEF_UCHAR ++typedef unsigned char uchar; ++#endif + -+/* bp->lock is held. */ -+static void b44_halt(struct b44 *bp) -+{ -+ b44_disable_ints(bp); -+ b44_chip_reset(bp); -+} ++#ifndef TYPEDEF_USHORT ++typedef unsigned short ushort; ++#endif + -+/* bp->lock is held. */ -+static void __b44_set_mac_addr(struct b44 *bp) -+{ -+ bw32(bp, B44_CAM_CTRL, 0); -+ if (!(bp->dev->flags & IFF_PROMISC)) { -+ u32 val; ++#ifndef TYPEDEF_UINT ++typedef unsigned int uint; ++#endif + -+ __b44_cam_write(bp, bp->dev->dev_addr, 0); -+ val = br32(bp, B44_CAM_CTRL); -+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); -+ } -+} ++#ifndef TYPEDEF_ULONG ++typedef unsigned long ulong; ++#endif + -+static int b44_set_mac_addr(struct net_device *dev, void *p) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ struct sockaddr *addr = p; ++/*----------------------- define [u]int8/16/32/64, uintptr --------------------*/ + -+ if (netif_running(dev)) -+ return -EBUSY; ++#ifndef TYPEDEF_UINT8 ++typedef unsigned char uint8; ++#endif + -+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); ++#ifndef TYPEDEF_UINT16 ++typedef unsigned short uint16; ++#endif + -+ spin_lock_irq(&bp->lock); -+ __b44_set_mac_addr(bp); -+ spin_unlock_irq(&bp->lock); ++#ifndef TYPEDEF_UINT32 ++typedef unsigned int uint32; ++#endif + -+ return 0; -+} ++#ifndef TYPEDEF_UINT64 ++typedef unsigned long long uint64; ++#endif + -+/* Called at device open time to get the chip ready for -+ * packet processing. Invoked with bp->lock held. -+ */ -+static void __b44_set_rx_mode(struct net_device *); -+static void b44_init_hw(struct b44 *bp) -+{ -+ u32 val; ++#ifndef TYPEDEF_UINTPTR ++typedef unsigned int uintptr; ++#endif + -+ b44_chip_reset(bp); -+ b44_phy_reset(bp); -+ b44_setup_phy(bp); ++#ifndef TYPEDEF_INT8 ++typedef signed char int8; ++#endif + -+ /* Enable CRC32, set proper LED modes and power on PHY */ -+ bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL); -+ bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT)); ++#ifndef TYPEDEF_INT16 ++typedef signed short int16; ++#endif + -+ /* This sets the MAC address too. */ -+ __b44_set_rx_mode(bp->dev); ++#ifndef TYPEDEF_INT32 ++typedef signed int int32; ++#endif + -+ /* MTU + eth header + possible VLAN tag + struct rx_header */ -+ bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); -+ bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN); ++#ifndef TYPEDEF_INT64 ++typedef signed long long int64; ++#endif + -+ bw32(bp, B44_TX_WMARK, 56); /* XXX magic */ -+ bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE); -+ bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); -+ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | -+ (bp->rx_offset << DMARX_CTRL_ROSHIFT))); -+ bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); ++/*----------------------- define float32/64, float_t -----------------------*/ + -+ bw32(bp, B44_DMARX_PTR, bp->rx_pending); -+ bp->rx_prod = bp->rx_pending; ++#ifndef TYPEDEF_FLOAT32 ++typedef float float32; ++#endif + -+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ); ++#ifndef TYPEDEF_FLOAT64 ++typedef double float64; ++#endif + -+ val = br32(bp, B44_ENET_CTRL); -+ bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE)); -+} ++/* ++ * abstracted floating point type allows for compile time selection of ++ * single or double precision arithmetic. Compiling with -DFLOAT32 ++ * selects single precision; the default is double precision. ++ */ + -+static int b44_open(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ int err; ++#ifndef TYPEDEF_FLOAT_T + -+ err = b44_alloc_consistent(bp); -+ if (err) -+ return err; ++#if defined(FLOAT32) ++typedef float32 float_t; ++#else /* default to double precision floating point */ ++typedef float64 float_t; ++#endif + -+ err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev); -+ if (err) -+ goto err_out_free; ++#endif /* TYPEDEF_FLOAT_T */ + -+ spin_lock_irq(&bp->lock); ++/*----------------------- define macro values -----------------------------*/ + -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ bp->flags |= B44_FLAG_INIT_COMPLETE; ++#ifndef FALSE ++#define FALSE 0 ++#endif + -+ spin_unlock_irq(&bp->lock); ++#ifndef TRUE ++#define TRUE 1 ++#endif + -+ init_timer(&bp->timer); -+ bp->timer.expires = jiffies + HZ; -+ bp->timer.data = (unsigned long) bp; -+ bp->timer.function = b44_timer; -+ add_timer(&bp->timer); ++#ifndef NULL ++#define NULL 0 ++#endif + -+ b44_enable_ints(bp); ++#ifndef OFF ++#define OFF 0 ++#endif + -+ return 0; ++#ifndef ON ++#define ON 1 ++#endif + -+err_out_free: -+ b44_free_consistent(bp); -+ return err; -+} ++#define AUTO (-1) + -+#if 0 -+/*static*/ void b44_dump_state(struct b44 *bp) -+{ -+ u32 val32, val32_2, val32_3, val32_4, val32_5; -+ u16 val16; ++/* Reclaiming text and data : ++ The following macros specify special linker sections that can be reclaimed ++ after a system is considered 'up'. ++ */ ++#if defined(__GNUC__) && defined(BCMRECLAIM) ++extern bool bcmreclaimed; ++#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data##_ini ++#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn##_ini ++#define BCMINIT(_id) _id##_ini ++#else ++#define BCMINITDATA(_data) _data ++#define BCMINITFN(_fn) _fn ++#define BCMINIT(_id) _id ++#define bcmreclaimed 0 ++#endif + -+ pci_read_config_word(bp->pdev, PCI_STATUS, &val16); -+ printk("DEBUG: PCI status [%04x] \n", val16); ++/*----------------------- define PTRSZ, INLINE ----------------------------*/ + -+} ++#ifndef PTRSZ ++#define PTRSZ sizeof (char*) +#endif + -+#ifdef CONFIG_NET_POLL_CONTROLLER -+/* -+ * Polling receive - used by netconsole and other diagnostic tools -+ * to allow network i/o with interrupts disabled. -+ */ -+static void b44_poll_controller(struct net_device *dev) -+{ -+ disable_irq(dev->irq); -+ b44_interrupt(dev->irq, dev, NULL); -+ enable_irq(dev->irq); -+} -+#endif ++#ifndef INLINE + -+static int b44_close(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); ++#ifdef _MSC_VER + -+ netif_stop_queue(dev); ++#define INLINE __inline + -+ del_timer_sync(&bp->timer); ++#elif __GNUC__ + -+ spin_lock_irq(&bp->lock); ++#define INLINE __inline__ + -+#if 0 -+ b44_dump_state(bp); -+#endif -+ b44_halt(bp); -+ b44_free_rings(bp); -+ bp->flags &= ~B44_FLAG_INIT_COMPLETE; -+ netif_carrier_off(bp->dev); ++#else ++ ++#define INLINE + -+ spin_unlock_irq(&bp->lock); ++#endif /* _MSC_VER */ + -+ free_irq(dev->irq, dev); ++#endif /* INLINE */ + -+ b44_free_consistent(bp); ++#undef TYPEDEF_BOOL ++#undef TYPEDEF_UCHAR ++#undef TYPEDEF_USHORT ++#undef TYPEDEF_UINT ++#undef TYPEDEF_ULONG ++#undef TYPEDEF_UINT8 ++#undef TYPEDEF_UINT16 ++#undef TYPEDEF_UINT32 ++#undef TYPEDEF_UINT64 ++#undef TYPEDEF_UINTPTR ++#undef TYPEDEF_INT8 ++#undef TYPEDEF_INT16 ++#undef TYPEDEF_INT32 ++#undef TYPEDEF_INT64 ++#undef TYPEDEF_FLOAT32 ++#undef TYPEDEF_FLOAT64 ++#undef TYPEDEF_FLOAT_T ++ ++#endif /* USE_TYPEDEF_DEFAULTS */ + -+ return 0; -+} ++#endif /* _TYPEDEFS_H_ */ +diff -urN linux.old/arch/mips/bcm947xx/int-handler.S linux.dev/arch/mips/bcm947xx/int-handler.S +--- linux.old/arch/mips/bcm947xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/int-handler.S 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,48 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+static struct net_device_stats *b44_get_stats(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ struct net_device_stats *nstat = &bp->stats; -+ struct b44_hw_stats *hwstat = &bp->hw_stats; -+ -+ /* Convert HW stats into netdevice stats. */ -+ nstat->rx_packets = hwstat->rx_pkts; -+ nstat->tx_packets = hwstat->tx_pkts; -+ nstat->rx_bytes = hwstat->rx_octets; -+ nstat->tx_bytes = hwstat->tx_octets; -+ nstat->tx_errors = (hwstat->tx_jabber_pkts + -+ hwstat->tx_oversize_pkts + -+ hwstat->tx_underruns + -+ hwstat->tx_excessive_cols + -+ hwstat->tx_late_cols); -+ nstat->multicast = hwstat->tx_multicast_pkts; -+ nstat->collisions = hwstat->tx_total_cols; -+ -+ nstat->rx_length_errors = (hwstat->rx_oversize_pkts + -+ hwstat->rx_undersize); -+ nstat->rx_over_errors = hwstat->rx_missed_pkts; -+ nstat->rx_frame_errors = hwstat->rx_align_errs; -+ nstat->rx_crc_errors = hwstat->rx_crc_errs; -+ nstat->rx_errors = (hwstat->rx_jabber_pkts + -+ hwstat->rx_oversize_pkts + -+ hwstat->rx_missed_pkts + -+ hwstat->rx_crc_align_errs + -+ hwstat->rx_undersize + -+ hwstat->rx_crc_errs + -+ hwstat->rx_align_errs + -+ hwstat->rx_symbol_errs); -+ -+ nstat->tx_aborted_errors = hwstat->tx_underruns; -+#if 0 -+ /* Carrier lost counter seems to be broken for some devices */ -+ nstat->tx_carrier_errors = hwstat->tx_carrier_lost; -+#endif ++#include ++#include ++#include ++#include + -+ return nstat; -+} ++ .text ++ .set noreorder ++ .set noat ++ .align 5 + -+static int __b44_load_mcast(struct b44 *bp, struct net_device *dev) -+{ -+ struct dev_mc_list *mclist; -+ int i, num_ents; ++ NESTED(bcm47xx_irq_handler, PT_SIZE, sp) ++ SAVE_ALL ++ CLI + -+ num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE); -+ mclist = dev->mc_list; -+ for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) { -+ __b44_cam_write(bp, mclist->dmi_addr, i + 1); -+ } -+ return i+1; -+} ++ .set at ++ .set noreorder + -+static void __b44_set_rx_mode(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ u32 val; -+ int i=0; -+ unsigned char zero[6] = {0,0,0,0,0,0}; -+ -+ val = br32(bp, B44_RXCONFIG); -+ val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); -+ if (dev->flags & IFF_PROMISC) { -+ val |= RXCONFIG_PROMISC; -+ bw32(bp, B44_RXCONFIG, val); -+ } else { -+ __b44_set_mac_addr(bp); ++ jal bcm47xx_irq_dispatch ++ move a0, sp + -+ if (dev->flags & IFF_ALLMULTI) -+ val |= RXCONFIG_ALLMULTI; -+ else -+ i=__b44_load_mcast(bp, dev); ++ j ret_from_irq ++ nop + -+ for(;i<64;i++) { -+ __b44_cam_write(bp, zero, i); -+ } -+ bw32(bp, B44_RXCONFIG, val); -+ val = br32(bp, B44_CAM_CTRL); -+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE); -+ } -+} -+ -+static void b44_set_rx_mode(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); ++ END(bcm47xx_irq_handler) +diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c +--- linux.old/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/irq.c 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,67 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+ spin_lock_irq(&bp->lock); -+ __b44_set_rx_mode(dev); -+ spin_unlock_irq(&bp->lock); -+} ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+static u32 b44_get_msglevel(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ return bp->msg_enable; -+} ++#include ++#include ++#include ++#include + -+static void b44_set_msglevel(struct net_device *dev, u32 value) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ bp->msg_enable = value; -+} ++extern asmlinkage void bcm47xx_irq_handler(void); + -+static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) ++void bcm47xx_irq_dispatch(struct pt_regs *regs) +{ -+ struct b44 *bp = netdev_priv(dev); -+ struct pci_dev *pci_dev = bp->pdev; ++ u32 cause; + -+ strcpy (info->driver, DRV_MODULE_NAME); -+ strcpy (info->version, DRV_MODULE_VERSION); -+ strcpy (info->bus_info, pci_name(pci_dev)); -+} ++ cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; + -+static int b44_nway_reset(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ u32 bmcr; -+ int r; -+ -+ spin_lock_irq(&bp->lock); -+ b44_readphy(bp, MII_BMCR, &bmcr); -+ b44_readphy(bp, MII_BMCR, &bmcr); -+ r = -EINVAL; -+ if (bmcr & BMCR_ANENABLE) { -+ b44_writephy(bp, MII_BMCR, -+ bmcr | BMCR_ANRESTART); -+ r = 0; -+ } -+ spin_unlock_irq(&bp->lock); ++ clear_c0_status(cause); + -+ return r; ++ if (cause & CAUSEF_IP7) ++ do_IRQ(7, regs); ++ if (cause & CAUSEF_IP2) ++ do_IRQ(2, regs); ++ if (cause & CAUSEF_IP3) ++ do_IRQ(3, regs); ++ if (cause & CAUSEF_IP4) ++ do_IRQ(4, regs); ++ if (cause & CAUSEF_IP5) ++ do_IRQ(5, regs); ++ if (cause & CAUSEF_IP6) ++ do_IRQ(6, regs); +} + -+static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++void __init arch_init_irq(void) +{ -+ struct b44 *bp = netdev_priv(dev); -+ -+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) -+ return -EAGAIN; -+ cmd->supported = (SUPPORTED_Autoneg); -+ cmd->supported |= (SUPPORTED_100baseT_Half | -+ SUPPORTED_100baseT_Full | -+ SUPPORTED_10baseT_Half | -+ SUPPORTED_10baseT_Full | -+ SUPPORTED_MII); -+ -+ cmd->advertising = 0; -+ if (bp->flags & B44_FLAG_ADV_10HALF) -+ cmd->advertising |= ADVERTISE_10HALF; -+ if (bp->flags & B44_FLAG_ADV_10FULL) -+ cmd->advertising |= ADVERTISE_10FULL; -+ if (bp->flags & B44_FLAG_ADV_100HALF) -+ cmd->advertising |= ADVERTISE_100HALF; -+ if (bp->flags & B44_FLAG_ADV_100FULL) -+ cmd->advertising |= ADVERTISE_100FULL; -+ cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; -+ cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ? -+ SPEED_100 : SPEED_10; -+ cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ? -+ DUPLEX_FULL : DUPLEX_HALF; -+ cmd->port = 0; -+ cmd->phy_address = bp->phy_addr; -+ cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ? -+ XCVR_INTERNAL : XCVR_EXTERNAL; -+ cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ? -+ AUTONEG_DISABLE : AUTONEG_ENABLE; -+ cmd->maxtxpkt = 0; -+ cmd->maxrxpkt = 0; -+ return 0; ++ set_except_vector(0, bcm47xx_irq_handler); ++ mips_cpu_irq_init(0); +} +diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c +--- linux.old/arch/mips/bcm947xx/pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/pci.c 2005-12-15 23:25:48.489984500 +0100 +@@ -0,0 +1,92 @@ ++#include ++#include ++#include ++#include + -+static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ -+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) -+ return -EAGAIN; -+ -+ /* We do not support gigabit. */ -+ if (cmd->autoneg == AUTONEG_ENABLE) { -+ if (cmd->advertising & -+ (ADVERTISED_1000baseT_Half | -+ ADVERTISED_1000baseT_Full)) -+ return -EINVAL; -+ } else if ((cmd->speed != SPEED_100 && -+ cmd->speed != SPEED_10) || -+ (cmd->duplex != DUPLEX_HALF && -+ cmd->duplex != DUPLEX_FULL)) { -+ return -EINVAL; -+ } -+ -+ spin_lock_irq(&bp->lock); -+ -+ if (cmd->autoneg == AUTONEG_ENABLE) { -+ bp->flags &= ~B44_FLAG_FORCE_LINK; -+ bp->flags &= ~(B44_FLAG_ADV_10HALF | -+ B44_FLAG_ADV_10FULL | -+ B44_FLAG_ADV_100HALF | -+ B44_FLAG_ADV_100FULL); -+ if (cmd->advertising & ADVERTISE_10HALF) -+ bp->flags |= B44_FLAG_ADV_10HALF; -+ if (cmd->advertising & ADVERTISE_10FULL) -+ bp->flags |= B44_FLAG_ADV_10FULL; -+ if (cmd->advertising & ADVERTISE_100HALF) -+ bp->flags |= B44_FLAG_ADV_100HALF; -+ if (cmd->advertising & ADVERTISE_100FULL) -+ bp->flags |= B44_FLAG_ADV_100FULL; -+ } else { -+ bp->flags |= B44_FLAG_FORCE_LINK; -+ if (cmd->speed == SPEED_100) -+ bp->flags |= B44_FLAG_100_BASE_T; -+ if (cmd->duplex == DUPLEX_FULL) -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ } ++#include ++#include + -+ b44_setup_phy(bp); ++#include ++#include ++#include ++#include ++#include ++#include + -+ spin_unlock_irq(&bp->lock); ++extern sb_t *sbh; + -+ return 0; -+} + -+static void b44_get_ringparam(struct net_device *dev, -+ struct ethtool_ringparam *ering) ++static int ++sb_pci_read_config(struct pci_bus *bus, unsigned int devfn, ++ int reg, int size, u32 *val) +{ -+ struct b44 *bp = netdev_priv(dev); -+ -+ ering->rx_max_pending = B44_RX_RING_SIZE - 1; -+ ering->rx_pending = bp->rx_pending; -+ -+ /* XXX ethtool lacks a tx_max_pending, oops... */ ++ int ret; ++ ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + -+static int b44_set_ringparam(struct net_device *dev, -+ struct ethtool_ringparam *ering) ++static int ++sb_pci_write_config(struct pci_bus *bus, unsigned int devfn, ++ int reg, int size, u32 val) +{ -+ struct b44 *bp = netdev_priv(dev); -+ -+ if ((ering->rx_pending > B44_RX_RING_SIZE - 1) || -+ (ering->rx_mini_pending != 0) || -+ (ering->rx_jumbo_pending != 0) || -+ (ering->tx_pending > B44_TX_RING_SIZE - 1)) -+ return -EINVAL; ++ int ret; ++ ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size); ++ return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} + -+ spin_lock_irq(&bp->lock); + -+ bp->rx_pending = ering->rx_pending; -+ bp->tx_pending = ering->tx_pending; ++static struct pci_ops sb_pci_ops = { ++ .read = sb_pci_read_config, ++ .write = sb_pci_write_config, ++}; + -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ netif_wake_queue(bp->dev); -+ spin_unlock_irq(&bp->lock); + -+ b44_enable_ints(bp); -+ -+ return 0; -+} ++static struct resource sb_pci_mem_resource = { ++ .name = "SB PCI Memory resources", ++ .start = SB_ENUM_BASE, ++ .end = SB_ENUM_LIM - 1, ++ .flags = IORESOURCE_MEM, ++}; + -+static void b44_get_pauseparam(struct net_device *dev, -+ struct ethtool_pauseparam *epause) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ -+ epause->autoneg = -+ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0; -+ epause->rx_pause = -+ (bp->flags & B44_FLAG_RX_PAUSE) != 0; -+ epause->tx_pause = -+ (bp->flags & B44_FLAG_TX_PAUSE) != 0; -+} ++static struct resource sb_pci_io_resource = { ++ .name = "SB PCI I/O resources", ++ .start = 0x100, ++ .end = 0x1FF, ++ .flags = IORESOURCE_IO, ++}; + -+static int b44_set_pauseparam(struct net_device *dev, -+ struct ethtool_pauseparam *epause) -+{ -+ struct b44 *bp = netdev_priv(dev); ++static struct pci_controller bcm47xx_sb_pci_controller = { ++ .pci_ops = &sb_pci_ops, ++ .mem_resource = &sb_pci_mem_resource, ++ .io_resource = &sb_pci_io_resource, ++}; + -+ spin_lock_irq(&bp->lock); -+ if (epause->autoneg) -+ bp->flags |= B44_FLAG_PAUSE_AUTO; -+ else -+ bp->flags &= ~B44_FLAG_PAUSE_AUTO; -+ if (epause->rx_pause) -+ bp->flags |= B44_FLAG_RX_PAUSE; -+ else -+ bp->flags &= ~B44_FLAG_RX_PAUSE; -+ if (epause->tx_pause) -+ bp->flags |= B44_FLAG_TX_PAUSE; -+ else -+ bp->flags &= ~B44_FLAG_TX_PAUSE; -+ if (bp->flags & B44_FLAG_PAUSE_AUTO) { -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ } else { -+ __b44_set_flow_ctrl(bp, bp->flags); -+ } -+ spin_unlock_irq(&bp->lock); ++static struct resource ext_pci_mem_resource = { ++ .name = "Ext PCI Memory resources", ++ .start = 0x40000000, ++ .end = 0x7fffffff, ++ .flags = IORESOURCE_MEM, ++}; + -+ b44_enable_ints(bp); -+ -+ return 0; -+} ++static struct resource ext_pci_io_resource = { ++ .name = "Ext PCI I/O resources", ++ .start = 0x200, ++ .end = 0x2FF, ++ .flags = IORESOURCE_IO, ++}; + -+static struct ethtool_ops b44_ethtool_ops = { -+ .get_drvinfo = b44_get_drvinfo, -+ .get_settings = b44_get_settings, -+ .set_settings = b44_set_settings, -+ .nway_reset = b44_nway_reset, -+ .get_link = ethtool_op_get_link, -+ .get_ringparam = b44_get_ringparam, -+ .set_ringparam = b44_set_ringparam, -+ .get_pauseparam = b44_get_pauseparam, -+ .set_pauseparam = b44_set_pauseparam, -+ .get_msglevel = b44_get_msglevel, -+ .set_msglevel = b44_set_msglevel, ++static struct pci_controller bcm47xx_ext_pci_controller = { ++ .pci_ops = &sb_pci_ops, ++ .mem_resource = &ext_pci_mem_resource, ++ .io_resource = &ext_pci_io_resource, +}; + -+static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++void bcm47xx_pci_init(void) +{ -+ struct mii_ioctl_data *data = if_mii(ifr); -+ struct b44 *bp = netdev_priv(dev); -+ int err; ++ sbpci_init(sbh); + -+ spin_lock_irq(&bp->lock); -+ err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL); -+ spin_unlock_irq(&bp->lock); ++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); + -+ return err; ++ register_pci_controller(&bcm47xx_sb_pci_controller); ++ register_pci_controller(&bcm47xx_ext_pci_controller); +} +diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c +--- linux.old/arch/mips/bcm947xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/prom.c 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+/* Read 128-bytes of EEPROM. */ -+static int b44_read_eeprom(struct b44 *bp, u8 *data) -+{ -+ long i; -+ u16 *ptr = (u16 *) data; -+ -+ for (i = 0; i < 128; i += 2) -+ ptr[i / 2] = readw(bp->regs + 4096 + i); ++#include ++#include ++#include ++#include + -+ return 0; -+} ++#include ++#include ++#include + -+static int __devinit b44_get_invariants(struct b44 *bp) ++const char *get_system_type(void) +{ -+ u8 eeprom[128]; -+ int err; -+ -+ err = b44_read_eeprom(bp, &eeprom[0]); -+ if (err) -+ goto out; -+ -+ bp->dev->dev_addr[0] = eeprom[79]; -+ bp->dev->dev_addr[1] = eeprom[78]; -+ bp->dev->dev_addr[2] = eeprom[81]; -+ bp->dev->dev_addr[3] = eeprom[80]; -+ bp->dev->dev_addr[4] = eeprom[83]; -+ bp->dev->dev_addr[5] = eeprom[82]; -+ -+ bp->phy_addr = eeprom[90] & 0x1f; -+ -+ /* With this, plus the rx_header prepended to the data by the -+ * hardware, we'll land the ethernet header on a 2-byte boundary. -+ */ -+ bp->rx_offset = 30; -+ -+ bp->imask = IMASK_DEF; -+ -+ bp->core_unit = ssb_core_unit(bp); -+ bp->dma_offset = SB_PCI_DMA; -+ -+ /* XXX - really required? -+ bp->flags |= B44_FLAG_BUGGY_TXPTR; -+ */ -+out: -+ return err; ++ return "Broadcom BCM47xx"; +} + -+static int __devinit b44_init_one(struct pci_dev *pdev, -+ const struct pci_device_id *ent) ++void __init prom_init(void) +{ -+ static int b44_version_printed = 0; -+ unsigned long b44reg_base, b44reg_len; -+ struct net_device *dev; -+ struct b44 *bp; -+ int err, i; -+ -+ if (b44_version_printed++ == 0) -+ printk(KERN_INFO "%s", version); -+ -+ err = pci_enable_device(pdev); -+ if (err) { -+ printk(KERN_ERR PFX "Cannot enable PCI device, " -+ "aborting.\n"); -+ return err; -+ } -+ -+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { -+ printk(KERN_ERR PFX "Cannot find proper PCI device " -+ "base address, aborting.\n"); -+ err = -ENODEV; -+ goto err_out_disable_pdev; -+ } -+ -+ err = pci_request_regions(pdev, DRV_MODULE_NAME); -+ if (err) { -+ printk(KERN_ERR PFX "Cannot obtain PCI resources, " -+ "aborting.\n"); -+ goto err_out_disable_pdev; -+ } -+ -+ pci_set_master(pdev); -+ -+ err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK); -+ if (err) { -+ printk(KERN_ERR PFX "No usable DMA configuration, " -+ "aborting.\n"); -+ goto err_out_free_res; -+ } -+ -+ err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK); -+ if (err) { -+ printk(KERN_ERR PFX "No usable DMA configuration, " -+ "aborting.\n"); -+ goto err_out_free_res; -+ } -+ -+ b44reg_base = pci_resource_start(pdev, 0); -+ b44reg_len = pci_resource_len(pdev, 0); -+ -+ dev = alloc_etherdev(sizeof(*bp)); -+ if (!dev) { -+ printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); -+ err = -ENOMEM; -+ goto err_out_free_res; -+ } -+ -+ SET_MODULE_OWNER(dev); -+ SET_NETDEV_DEV(dev,&pdev->dev); -+ -+ /* No interesting netdevice features in this card... */ -+ dev->features |= 0; -+ -+ bp = netdev_priv(dev); -+ bp->pdev = pdev; -+ bp->dev = dev; -+ if (b44_debug >= 0) -+ bp->msg_enable = (1 << b44_debug) - 1; -+ else -+ bp->msg_enable = B44_DEF_MSG_ENABLE; ++ unsigned long mem; + -+ spin_lock_init(&bp->lock); ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM47XX; + -+ bp->regs = ioremap(b44reg_base, b44reg_len); -+ if (bp->regs == 0UL) { -+ printk(KERN_ERR PFX "Cannot map device registers, " -+ "aborting.\n"); -+ err = -ENOMEM; -+ goto err_out_free_dev; ++ /* Figure out memory size by finding aliases */ ++ for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { ++ if (*(unsigned long *)((unsigned long)(prom_init) + mem) == ++ *(unsigned long *)(prom_init)) ++ break; + } + -+ bp->rx_pending = B44_DEF_RX_RING_PENDING; -+ bp->tx_pending = B44_DEF_TX_RING_PENDING; -+ -+ dev->open = b44_open; -+ dev->stop = b44_close; -+ dev->hard_start_xmit = b44_start_xmit; -+ dev->get_stats = b44_get_stats; -+ dev->set_multicast_list = b44_set_rx_mode; -+ dev->set_mac_address = b44_set_mac_addr; -+ dev->do_ioctl = b44_ioctl; -+ dev->tx_timeout = b44_tx_timeout; -+ dev->poll = b44_poll; -+ dev->weight = 64; -+ dev->watchdog_timeo = B44_TX_TIMEOUT; -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ dev->poll_controller = b44_poll_controller; -+#endif -+ dev->change_mtu = b44_change_mtu; -+ dev->irq = pdev->irq; -+ SET_ETHTOOL_OPS(dev, &b44_ethtool_ops); -+ -+ err = b44_get_invariants(bp); -+ if (err) { -+ printk(KERN_ERR PFX "Problem fetching invariants of chip, " -+ "aborting.\n"); -+ goto err_out_iounmap; -+ } ++ add_memory_region(0, mem, BOOT_MEM_RAM); ++} + -+ bp->mii_if.dev = dev; -+ bp->mii_if.mdio_read = b44_mii_read; -+ bp->mii_if.mdio_write = b44_mii_write; -+ bp->mii_if.phy_id = bp->phy_addr; -+ bp->mii_if.phy_id_mask = 0x1f; -+ bp->mii_if.reg_num_mask = 0x1f; -+ -+ /* By default, advertise all speed/duplex settings. */ -+ bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL | -+ B44_FLAG_ADV_100HALF | B44_FLAG_ADV_100FULL); -+ -+ /* By default, auto-negotiate PAUSE. */ -+ bp->flags |= B44_FLAG_PAUSE_AUTO; -+ -+ err = register_netdev(dev); -+ if (err) { -+ printk(KERN_ERR PFX "Cannot register net device, " -+ "aborting.\n"); -+ goto err_out_iounmap; -+ } ++unsigned long __init prom_free_prom_memory(void) ++{ ++ return 0; ++} +diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c +--- linux.old/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/setup.c 2005-12-15 19:17:21.508844000 +0100 +@@ -0,0 +1,107 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * Copyright (C) 2005 Waldemar Brodkorb ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+ pci_set_drvdata(pdev, dev); ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ pci_save_state(bp->pdev); ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); -+ for (i = 0; i < 6; i++) -+ printk("%2.2x%c", dev->dev_addr[i], -+ i == 5 ? '\n' : ':'); ++extern void bcm47xx_pci_init(void); ++extern void bcm47xx_time_init(void); ++extern void bcm47xx_timer_setup(struct irqaction *irq); ++void *sbh; + -+ return 0; ++static int ser_line = 0; + -+err_out_iounmap: -+ iounmap(bp->regs); ++static void ++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift) ++{ ++ struct uart_port s; + -+err_out_free_dev: -+ free_netdev(dev); ++ memset(&s, 0, sizeof(s)); + -+err_out_free_res: -+ pci_release_regions(pdev); ++ s.line = ser_line++; ++ s.membase = regs; ++ s.irq = irq + 2; ++ s.uartclk = baud_base; ++ s.flags = ASYNC_BOOT_AUTOCONF; ++ s.iotype = SERIAL_IO_MEM; ++ s.regshift = reg_shift; + -+err_out_disable_pdev: -+ pci_disable_device(pdev); -+ pci_set_drvdata(pdev, NULL); -+ return err; ++ if (early_serial_setup(&s) != 0) { ++ printk(KERN_ERR "Serial setup failed!\n"); ++ } +} + -+static void __devexit b44_remove_one(struct pci_dev *pdev) ++static void bcm47xx_machine_restart(char *command) +{ -+ struct net_device *dev = pci_get_drvdata(pdev); -+ -+ if (dev) { -+ struct b44 *bp = netdev_priv(dev); ++ printk("Please stand by while rebooting the system...\n"); ++ ++ /* Set the watchdog timer to reset immediately */ ++ local_irq_disable(); ++ sb_watchdog(sbh, 1); ++ while (1); ++} + -+ unregister_netdev(dev); -+ iounmap(bp->regs); -+ free_netdev(dev); -+ pci_release_regions(pdev); -+ pci_disable_device(pdev); -+ pci_set_drvdata(pdev, NULL); -+ } ++static void bcm47xx_machine_halt(void) ++{ ++ /* Disable interrupts and watchdog and spin forever */ ++ local_irq_disable(); ++ sb_watchdog(sbh, 0); ++ while (1); +} + -+static int b44_suspend(struct pci_dev *pdev, pm_message_t state) ++void __init plat_setup(void) +{ -+ struct net_device *dev = pci_get_drvdata(pdev); -+ struct b44 *bp = netdev_priv(dev); + -+ if (!netif_running(dev)) -+ return 0; ++ sbh = sb_kattach(); ++ sb_mips_init(sbh); + -+ del_timer_sync(&bp->timer); ++ bcm47xx_pci_init(); + -+ spin_lock_irq(&bp->lock); ++ set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000)); + -+ b44_halt(bp); -+ netif_carrier_off(bp->dev); -+ netif_device_detach(bp->dev); -+ b44_free_rings(bp); ++ sb_serial_init(sbh, serial_add); + -+ spin_unlock_irq(&bp->lock); -+ return 0; ++ _machine_restart = bcm47xx_machine_restart; ++ _machine_halt = bcm47xx_machine_halt; ++ _machine_power_off = bcm47xx_machine_halt; ++ ++ board_time_init = bcm47xx_time_init; ++ board_timer_setup = bcm47xx_timer_setup; +} +diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c +--- linux.old/arch/mips/bcm947xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm947xx/time.c 2005-12-15 12:57:27.877187750 +0100 +@@ -0,0 +1,59 @@ ++/* ++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ + -+static int b44_resume(struct pci_dev *pdev) -+{ -+ struct net_device *dev = pci_get_drvdata(pdev); -+ struct b44 *bp = netdev_priv(dev); -+ -+ pci_restore_state(pdev); ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ if (!netif_running(dev)) -+ return 0; ++void __init ++bcm47xx_time_init(void) ++{ ++ unsigned int hz; + -+ spin_lock_irq(&bp->lock); ++ /* ++ * Use deterministic values for initial counter interrupt ++ * so that calibrate delay avoids encountering a counter wrap. ++ */ ++ write_c0_count(0); ++ write_c0_compare(0xffff); + -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ netif_device_attach(bp->dev); -+ spin_unlock_irq(&bp->lock); ++ hz = 200 * 1000 * 1000; + -+ bp->timer.expires = jiffies + HZ; -+ add_timer(&bp->timer); ++ /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ ++ mips_hpt_frequency = hz / 2; + -+ b44_enable_ints(bp); -+ return 0; +} + -+static struct pci_driver b44_driver = { -+ .name = DRV_MODULE_NAME, -+ .id_table = b44_pci_tbl, -+ .probe = b44_init_one, -+ .remove = __devexit_p(b44_remove_one), -+ .suspend = b44_suspend, -+ .resume = b44_resume, -+}; -+ -+static int __init b44_init(void) ++void __init ++bcm47xx_timer_setup(struct irqaction *irq) +{ -+ return pci_module_init(&b44_driver); ++ /* Enable the timer interrupt */ ++ setup_irq(7, irq); +} -+ -+static void __exit b44_cleanup(void) +diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c +--- linux.old/arch/mips/kernel/cpu-probe.c 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/kernel/cpu-probe.c 2005-12-15 12:57:27.901177250 +0100 +@@ -656,6 +656,28 @@ + } + + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) +{ -+ pci_unregister_driver(&b44_driver); ++ decode_config1(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM3302: ++ c->cputype = CPU_BCM3302; ++ c->isa_level = MIPS_CPU_ISA_M32; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; ++ break; ++ case PRID_IMP_BCM4710: ++ c->cputype = CPU_BCM4710; ++ c->isa_level = MIPS_CPU_ISA_M32; ++ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | ++ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } +} + -+module_init(b44_init); -+module_exit(b44_cleanup); -+ -diff -Nur linux-2.6.12.5/drivers/net/b44.h linux-2.6.12.5-brcm/drivers/net/b44.h ---- linux-2.6.12.5/drivers/net/b44.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/drivers/net/b44.h 2005-08-28 11:12:20.694819024 +0200 -@@ -292,6 +292,9 @@ - #define SSB_PCI_MASK1 0xfc000000 - #define SSB_PCI_MASK2 0xc0000000 + __init void cpu_probe(void) + { + struct cpuinfo_mips *c = ¤t_cpu_data; +@@ -678,6 +700,9 @@ + case PRID_COMP_SIBYTE: + cpu_probe_sibyte(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_SANDCRAFT: + cpu_probe_sandcraft(c); + break; +diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S +--- linux.old/arch/mips/kernel/head.S 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/kernel/head.S 2005-12-15 12:57:27.901177250 +0100 +@@ -107,6 +107,14 @@ + #endif + .endm -+#define br32(REG) readl(bp->regs + (REG)) -+#define bw32(REG,VAL) writel((VAL), bp->regs + (REG)) ++#ifdef CONFIG_BCM4710 ++#undef eret ++#define eret nop; nop; eret ++#endif ++ ++ j kernel_entry ++ nop + - /* 4400 PHY registers */ - #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ - #define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ -@@ -345,6 +348,8 @@ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. +diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c +--- linux.old/arch/mips/kernel/proc.c 2005-12-15 13:26:49.766024000 +0100 ++++ linux.dev/arch/mips/kernel/proc.c 2005-12-15 12:57:27.921168500 +0100 +@@ -82,6 +82,8 @@ + [CPU_VR4181] = "NEC VR4181", + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000", ++ [CPU_BCM3302] = "Broadcom BCM3302", ++ [CPU_BCM4710] = "Broadcom BCM4710", + [CPU_PR4450] = "Philips PR4450", }; - #define B44_MCAST_TABLE_SIZE 32 -+#define B44_PHY_ADDR_NO_PHY 30 -+#define B44_MDC_RATIO 5000000 - - /* SW copy of device statistics, kept up to date by periodic timer - * which probes HW values. Must have same relative layout as HW -@@ -410,7 +415,7 @@ - struct net_device_stats stats; - struct b44_hw_stats hw_stats; +diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c +--- linux.old/arch/mips/mm/tlbex.c 2005-12-15 13:26:49.794011750 +0100 ++++ linux.dev/arch/mips/mm/tlbex.c 2005-12-15 12:57:27.945158000 +0100 +@@ -858,6 +858,8 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM3302: ++ case CPU_BCM4710: + tlbw(p); + break; -- void __iomem *regs; -+ unsigned long regs; - struct pci_dev *pdev; - struct net_device *dev; +diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile +--- linux.old/arch/mips/pci/Makefile 2005-12-15 13:26:49.814003000 +0100 ++++ linux.dev/arch/mips/pci/Makefile 2005-12-15 14:27:26.439319250 +0100 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o ++obj-$(CONFIG_BCM947XX) += fixup-bcm47xx.o -diff -Nur linux-2.6.12.5/drivers/net/b44.h.orig linux-2.6.12.5-brcm/drivers/net/b44.h.orig ---- linux-2.6.12.5/drivers/net/b44.h.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/drivers/net/b44.h.orig 2005-08-15 02:20:18.000000000 +0200 -@@ -0,0 +1,427 @@ -+#ifndef _B44_H -+#define _B44_H -+ -+/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */ -+#define B44_DEVCTRL 0x0000UL /* Device Control */ -+#define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */ -+#define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */ -+#define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */ -+#define DEVCTRL_EPR 0x00008000 /* EPHY Reset */ -+#define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */ -+#define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */ -+#define DEVCTRL_PADDR 0x0007c000 /* PHY Address */ -+#define DEVCTRL_PADDR_SHIFT 18 -+#define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */ -+#define B44_WKUP_LEN 0x0010UL /* Wakeup Length */ -+#define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */ -+#define WKUP_LEN_D0 0x00000080 -+#define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */ -+#define WKUP_LEN_P1_SHIFT 8 -+#define WKUP_LEN_D1 0x00008000 -+#define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */ -+#define WKUP_LEN_P2_SHIFT 16 -+#define WKUP_LEN_D2 0x00000000 -+#define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */ -+#define WKUP_LEN_P3_SHIFT 24 -+#define WKUP_LEN_D3 0x80000000 -+#define B44_ISTAT 0x0020UL /* Interrupt Status */ -+#define ISTAT_LS 0x00000020 /* Link Change (B0 only) */ -+#define ISTAT_PME 0x00000040 /* Power Management Event */ -+#define ISTAT_TO 0x00000080 /* General Purpose Timeout */ -+#define ISTAT_DSCE 0x00000400 /* Descriptor Error */ -+#define ISTAT_DATAE 0x00000800 /* Data Error */ -+#define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */ -+#define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */ -+#define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */ -+#define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */ -+#define ISTAT_RX 0x00010000 /* RX Interrupt */ -+#define ISTAT_TX 0x01000000 /* TX Interrupt */ -+#define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */ -+#define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */ -+#define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */ -+#define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU) -+#define B44_IMASK 0x0024UL /* Interrupt Mask */ -+#define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX) -+#define B44_GPTIMER 0x0028UL /* General Purpose Timer */ -+#define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */ -+#define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */ -+#define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */ -+#define B44_FILT_DATA 0x0094UL /* ENET Filter Data */ -+#define B44_TXBURST 0x00A0UL /* TX Max Burst Length */ -+#define B44_RXBURST 0x00A4UL /* RX Max Burst Length */ -+#define B44_MAC_CTRL 0x00A8UL /* MAC Control */ -+#define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */ -+#define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */ -+#define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */ -+#define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */ -+#define MAC_CTRL_PHY_LEDCTRL_SHIFT 5 -+#define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */ -+#define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */ -+#define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */ -+#define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */ -+#define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */ -+#define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */ -+#define RCV_LAZY_FC_SHIFT 24 -+#define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */ -+#define DMATX_CTRL_ENABLE 0x00000001 /* Enable */ -+#define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */ -+#define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */ -+#define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */ -+#define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */ -+#define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */ -+#define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */ -+#define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */ -+#define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ -+#define DMATX_STAT_SMASK 0x0000f000 /* State Mask */ -+#define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */ -+#define DMATX_STAT_SACTIVE 0x00001000 /* State Active */ -+#define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */ -+#define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */ -+#define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */ -+#define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */ -+#define DMATX_STAT_ENONE 0x00000000 /* Error None */ -+#define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ -+#define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */ -+#define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */ -+#define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ -+#define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */ -+#define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */ -+#define DMARX_CTRL_ENABLE 0x00000001 /* Enable */ -+#define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */ -+#define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */ -+#define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */ -+#define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */ -+#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */ -+#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */ -+#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */ -+#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */ -+#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */ -+#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */ -+#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */ -+#define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */ -+#define DMARX_STAT_ENONE 0x00000000 /* Error None */ -+#define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */ -+#define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */ -+#define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */ -+#define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */ -+#define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */ -+#define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */ -+#define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */ -+#define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */ -+#define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */ -+#define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */ -+#define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */ -+#define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */ -+#define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */ -+#define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */ -+#define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */ -+#define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */ -+#define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */ -+#define B44_RXCONFIG 0x0400UL /* EMAC RX Config */ -+#define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */ -+#define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */ -+#define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */ -+#define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */ -+#define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */ -+#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ -+#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ -+#define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ -+#define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ -+#define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ -+#define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ -+#define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */ -+#define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */ -+#define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */ -+#define MDIO_DATA_DATA 0x0000ffff /* R/W Data */ -+#define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */ -+#define MDIO_DATA_TA_SHIFT 16 -+#define MDIO_TA_VALID 2 -+#define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */ -+#define MDIO_DATA_RA_SHIFT 18 -+#define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */ -+#define MDIO_DATA_PMD_SHIFT 23 -+#define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */ -+#define MDIO_DATA_OP_SHIFT 28 -+#define MDIO_OP_WRITE 1 -+#define MDIO_OP_READ 2 -+#define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */ -+#define MDIO_DATA_SB_SHIFT 30 -+#define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */ -+#define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */ -+#define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */ -+#define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */ -+#define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */ -+#define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */ -+#define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */ -+#define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */ -+#define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */ -+#define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */ -+#define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */ -+#define CAM_CTRL_MSEL 0x00000002 /* Mask Select */ -+#define CAM_CTRL_READ 0x00000004 /* Read */ -+#define CAM_CTRL_WRITE 0x00000008 /* Read */ -+#define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */ -+#define CAM_CTRL_INDEX_SHIFT 16 -+#define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */ -+#define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */ -+#define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */ -+#define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */ -+#define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */ -+#define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */ -+#define B44_TX_CTRL 0x0430UL /* EMAC TX Control */ -+#define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */ -+#define TX_CTRL_FMODE 0x00000002 /* Flow Mode */ -+#define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */ -+#define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */ -+#define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */ -+#define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */ -+#define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */ -+#define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */ -+#define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */ -+#define B44_TX_O 0x0508UL /* MIB TX Octets */ -+#define B44_TX_P 0x050CUL /* MIB TX Packets */ -+#define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */ -+#define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */ -+#define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */ -+#define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */ -+#define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */ -+#define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */ -+#define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */ -+#define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */ -+#define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */ -+#define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */ -+#define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */ -+#define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */ -+#define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */ -+#define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */ -+#define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */ -+#define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */ -+#define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */ -+#define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */ -+#define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */ -+#define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */ -+#define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */ -+#define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */ -+#define B44_RX_O 0x0588UL /* MIB RX Octets */ -+#define B44_RX_P 0x058CUL /* MIB RX Packets */ -+#define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */ -+#define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */ -+#define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */ -+#define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */ -+#define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */ -+#define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */ -+#define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */ -+#define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */ -+#define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */ -+#define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */ -+#define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */ -+#define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */ -+#define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */ -+#define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */ -+#define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */ -+#define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */ -+#define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */ -+#define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ -+#define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ -+ -+/* Silicon backplane register definitions */ -+#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */ -+#define SBIMSTATE_PC 0x0000000f /* Pipe Count */ -+#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */ -+#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */ -+#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */ -+#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */ -+#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */ -+#define SBIMSTATE_IBE 0x00020000 /* In Band Error */ -+#define SBIMSTATE_TO 0x00040000 /* Timeout */ -+#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */ -+#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ -+#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ -+#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */ -+#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */ -+#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */ -+#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */ -+#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ -+#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */ -+#define SBTMSLOW_RESET 0x00000001 /* Reset */ -+#define SBTMSLOW_REJECT 0x00000002 /* Reject */ -+#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */ -+#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ -+#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */ -+#define SBTMSLOW_BE 0x80000000 /* BIST Enable */ -+#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */ -+#define SBTMSHIGH_SERR 0x00000001 /* S-error */ -+#define SBTMSHIGH_INT 0x00000002 /* Interrupt */ -+#define SBTMSHIGH_BUSY 0x00000004 /* Busy */ -+#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */ -+#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */ -+#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */ -+#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */ -+#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */ -+#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */ -+#define SBIDHIGH_CC_SHIFT 4 -+#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */ -+#define SBIDHIGH_VC_SHIFT 16 -+ -+/* SSB PCI config space registers. */ -+#define SSB_BAR0_WIN 0x80 -+#define SSB_BAR1_WIN 0x84 -+#define SSB_SPROM_CONTROL 0x88 -+#define SSB_BAR1_CONTROL 0x8c -+ -+/* SSB core and host control registers. */ -+#define SSB_CONTROL 0x0000UL -+#define SSB_ARBCONTROL 0x0010UL -+#define SSB_ISTAT 0x0020UL -+#define SSB_IMASK 0x0024UL -+#define SSB_MBOX 0x0028UL -+#define SSB_BCAST_ADDR 0x0050UL -+#define SSB_BCAST_DATA 0x0054UL -+#define SSB_PCI_TRANS_0 0x0100UL -+#define SSB_PCI_TRANS_1 0x0104UL -+#define SSB_PCI_TRANS_2 0x0108UL -+#define SSB_SPROM 0x0800UL -+ -+#define SSB_PCI_MEM 0x00000000 -+#define SSB_PCI_IO 0x00000001 -+#define SSB_PCI_CFG0 0x00000002 -+#define SSB_PCI_CFG1 0x00000003 -+#define SSB_PCI_PREF 0x00000004 -+#define SSB_PCI_BURST 0x00000008 -+#define SSB_PCI_MASK0 0xfc000000 -+#define SSB_PCI_MASK1 0xfc000000 -+#define SSB_PCI_MASK2 0xc0000000 -+ -+/* 4400 PHY registers */ -+#define B44_MII_AUXCTRL 24 /* Auxiliary Control */ -+#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */ -+#define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */ -+#define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */ -+#define B44_MII_ALEDCTRL 26 /* Activity LED */ -+#define MII_ALEDCTRL_ALLMSK 0x7fff -+#define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */ -+#define MII_TLEDCTRL_ENABLE 0x0040 -+ -+struct dma_desc { -+ u32 ctrl; -+ u32 addr; -+}; -+ -+/* There are only 12 bits in the DMA engine for descriptor offsetting -+ * so the table must be aligned on a boundary of this. -+ */ -+#define DMA_TABLE_BYTES 4096 -+ -+#define DESC_CTRL_LEN 0x00001fff -+#define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */ -+#define DESC_CTRL_EOT 0x10000000 /* End of Table */ -+#define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */ -+#define DESC_CTRL_EOF 0x40000000 /* End of Frame */ -+#define DESC_CTRL_SOF 0x80000000 /* Start of Frame */ -+ -+#define RX_COPY_THRESHOLD 256 -+ -+struct rx_header { -+ u16 len; -+ u16 flags; -+ u16 pad[12]; -+}; -+#define RX_HEADER_LEN 28 -+ -+#define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */ -+#define RX_FLAG_CRCERR 0x00000002 /* CRC Error */ -+#define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */ -+#define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */ -+#define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */ -+#define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */ -+#define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */ -+#define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */ -+#define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */ -+#define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO) -+ -+struct ring_info { -+ struct sk_buff *skb; -+ DECLARE_PCI_UNMAP_ADDR(mapping); -+}; -+ -+#define B44_MCAST_TABLE_SIZE 32 -+ -+/* SW copy of device statistics, kept up to date by periodic timer -+ * which probes HW values. Must have same relative layout as HW -+ * register above, because b44_stats_update depends upon this. -+ */ -+struct b44_hw_stats { -+ u32 tx_good_octets, tx_good_pkts, tx_octets; -+ u32 tx_pkts, tx_broadcast_pkts, tx_multicast_pkts; -+ u32 tx_len_64, tx_len_65_to_127, tx_len_128_to_255; -+ u32 tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max; -+ u32 tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts; -+ u32 tx_underruns, tx_total_cols, tx_single_cols; -+ u32 tx_multiple_cols, tx_excessive_cols, tx_late_cols; -+ u32 tx_defered, tx_carrier_lost, tx_pause_pkts; -+ u32 __pad1[8]; -+ -+ u32 rx_good_octets, rx_good_pkts, rx_octets; -+ u32 rx_pkts, rx_broadcast_pkts, rx_multicast_pkts; -+ u32 rx_len_64, rx_len_65_to_127, rx_len_128_to_255; -+ u32 rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max; -+ u32 rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts; -+ u32 rx_missed_pkts, rx_crc_align_errs, rx_undersize; -+ u32 rx_crc_errs, rx_align_errs, rx_symbol_errs; -+ u32 rx_pause_pkts, rx_nonpause_pkts; -+}; -+ -+struct b44 { -+ spinlock_t lock; -+ -+ u32 imask, istat; -+ -+ struct dma_desc *rx_ring, *tx_ring; -+ -+ u32 tx_prod, tx_cons; -+ u32 rx_prod, rx_cons; -+ -+ struct ring_info *rx_buffers; -+ struct ring_info *tx_buffers; -+ -+ u32 dma_offset; -+ u32 flags; -+#define B44_FLAG_INIT_COMPLETE 0x00000001 -+#define B44_FLAG_BUGGY_TXPTR 0x00000002 -+#define B44_FLAG_REORDER_BUG 0x00000004 -+#define B44_FLAG_PAUSE_AUTO 0x00008000 -+#define B44_FLAG_FULL_DUPLEX 0x00010000 -+#define B44_FLAG_100_BASE_T 0x00020000 -+#define B44_FLAG_TX_PAUSE 0x00040000 -+#define B44_FLAG_RX_PAUSE 0x00080000 -+#define B44_FLAG_FORCE_LINK 0x00100000 -+#define B44_FLAG_ADV_10HALF 0x01000000 -+#define B44_FLAG_ADV_10FULL 0x02000000 -+#define B44_FLAG_ADV_100HALF 0x04000000 -+#define B44_FLAG_ADV_100FULL 0x08000000 -+#define B44_FLAG_INTERNAL_PHY 0x10000000 -+ -+ u32 rx_offset; -+ -+ u32 msg_enable; -+ -+ struct timer_list timer; -+ -+ struct net_device_stats stats; -+ struct b44_hw_stats hw_stats; + # + # These are still pretty much in the old state, watch, go blind. +diff -urN linux.old/arch/mips/pci/fixup-bcm47xx.c linux.dev/arch/mips/pci/fixup-bcm47xx.c +--- linux.old/arch/mips/pci/fixup-bcm47xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/fixup-bcm47xx.c 2005-12-15 12:57:27.945158000 +0100 +@@ -0,0 +1,23 @@ ++#include ++#include + -+ void __iomem *regs; -+ struct pci_dev *pdev; -+ struct net_device *dev; ++/* Do platform specific device initialization at pci_enable_device() time */ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ return 0; ++} + -+ dma_addr_t rx_ring_dma, tx_ring_dma; ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u8 irq; ++ ++ if (dev->bus->number == 1) ++ return 2; + -+ u32 rx_pending; -+ u32 tx_pending; -+ u8 phy_addr; -+ u8 core_unit; ++ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); ++ return irq + 2; ++} + -+ struct mii_if_info mii_if; ++struct pci_fixup pcibios_fixups[] = { ++ { 0 } +}; -+ -+#endif /* _B44_H */ -diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h ---- linux-2.6.12.5/include/asm-mips/bootinfo.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h 2005-08-28 11:12:20.695818872 +0200 -@@ -213,6 +213,12 @@ +diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h +--- linux.old/include/asm-mips/bootinfo.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/asm-mips/bootinfo.h 2005-12-15 12:57:27.969147500 +0100 +@@ -218,6 +218,12 @@ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ @@ -18110,10 +11469,10 @@ diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include #define CL_SIZE COMMAND_LINE_SIZE const char *get_system_type(void); -diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm-mips/cpu.h ---- linux-2.6.12.5/include/asm-mips/cpu.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/asm-mips/cpu.h 2005-08-28 11:12:20.695818872 +0200 -@@ -87,6 +87,13 @@ +diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h +--- linux.old/include/asm-mips/cpu.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/asm-mips/cpu.h 2005-12-15 12:57:27.969147500 +0100 +@@ -102,6 +102,13 @@ #define PRID_IMP_SR71000 0x0400 /* @@ -18127,42 +11486,20 @@ diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm- * Definitions for 7:0 on legacy processors */ -@@ -177,7 +184,9 @@ - #define CPU_VR4133 56 - #define CPU_AU1550 57 - #define CPU_24K 58 --#define CPU_LAST 58 -+#define CPU_BCM3302 59 -+#define CPU_BCM4710 60 -+#define CPU_LAST 60 +@@ -196,7 +203,9 @@ + #define CPU_34K 60 + #define CPU_PR4450 61 + #define CPU_SB1A 62 +-#define CPU_LAST 62 ++#define CPU_BCM3302 63 ++#define CPU_BCM4710 64 ++#define CPU_LAST 64 /* * ISA Level encodings -diff -Nur linux-2.6.12.5/include/asm-mips/mipsregs.h linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h ---- linux-2.6.12.5/include/asm-mips/mipsregs.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h 2005-08-28 11:12:20.722814768 +0200 -@@ -790,10 +790,18 @@ - #define read_c0_config1() __read_32bit_c0_register($16, 1) - #define read_c0_config2() __read_32bit_c0_register($16, 2) - #define read_c0_config3() __read_32bit_c0_register($16, 3) -+#define read_c0_config4() __read_32bit_c0_register($16, 4) -+#define read_c0_config5() __read_32bit_c0_register($16, 5) -+#define read_c0_config6() __read_32bit_c0_register($16, 6) -+#define read_c0_config7() __read_32bit_c0_register($16, 7) - #define write_c0_config(val) __write_32bit_c0_register($16, 0, val) - #define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) - #define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) - #define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) -+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) -+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) -+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) -+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) - - /* - * The WatchLo register. There may be upto 8 of them. -diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/init.h ---- linux-2.6.12.5/include/linux/init.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/linux/init.h 2005-08-28 11:12:20.723814616 +0200 +diff -urN linux.old/include/linux/init.h linux.dev/include/linux/init.h +--- linux.old/include/linux/init.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/linux/init.h 2005-12-15 12:57:27.973145750 +0100 @@ -86,6 +86,8 @@ static initcall_t __initcall_##fn __attribute_used__ \ __attribute__((__section__(".initcall" level ".init"))) = fn @@ -18172,10 +11509,10 @@ diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/ #define core_initcall(fn) __define_initcall("1",fn) #define postcore_initcall(fn) __define_initcall("2",fn) #define arch_initcall(fn) __define_initcall("3",fn) -diff -Nur linux-2.6.12.5/include/linux/pci_ids.h linux-2.6.12.5-brcm/include/linux/pci_ids.h ---- linux-2.6.12.5/include/linux/pci_ids.h 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h 2005-08-28 11:12:20.726814160 +0200 -@@ -2110,6 +2110,7 @@ +diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h +--- linux.old/include/linux/pci_ids.h 2005-12-15 13:26:49.818001250 +0100 ++++ linux.dev/include/linux/pci_ids.h 2005-12-15 12:57:27.977144000 +0100 +@@ -1835,6 +1835,7 @@ #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e #define PCI_DEVICE_ID_BCM4401 0x4401 #define PCI_DEVICE_ID_BCM4401B0 0x4402 @@ -18183,2616 +11520,3 @@ diff -Nur linux-2.6.12.5/include/linux/pci_ids.h linux-2.6.12.5-brcm/include/lin #define PCI_VENDOR_ID_TOPIC 0x151f #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 -diff -Nur linux-2.6.12.5/include/linux/pci_ids.h.orig linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig ---- linux-2.6.12.5/include/linux/pci_ids.h.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig 2005-08-15 02:20:18.000000000 +0200 -@@ -0,0 +1,2609 @@ -+/* -+ * PCI Class, Vendor and Device IDs -+ * -+ * Please keep sorted. -+ */ -+ -+/* Device classes and subclasses */ -+ -+#define PCI_CLASS_NOT_DEFINED 0x0000 -+#define PCI_CLASS_NOT_DEFINED_VGA 0x0001 -+ -+#define PCI_BASE_CLASS_STORAGE 0x01 -+#define PCI_CLASS_STORAGE_SCSI 0x0100 -+#define PCI_CLASS_STORAGE_IDE 0x0101 -+#define PCI_CLASS_STORAGE_FLOPPY 0x0102 -+#define PCI_CLASS_STORAGE_IPI 0x0103 -+#define PCI_CLASS_STORAGE_RAID 0x0104 -+#define PCI_CLASS_STORAGE_OTHER 0x0180 -+ -+#define PCI_BASE_CLASS_NETWORK 0x02 -+#define PCI_CLASS_NETWORK_ETHERNET 0x0200 -+#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201 -+#define PCI_CLASS_NETWORK_FDDI 0x0202 -+#define PCI_CLASS_NETWORK_ATM 0x0203 -+#define PCI_CLASS_NETWORK_OTHER 0x0280 -+ -+#define PCI_BASE_CLASS_DISPLAY 0x03 -+#define PCI_CLASS_DISPLAY_VGA 0x0300 -+#define PCI_CLASS_DISPLAY_XGA 0x0301 -+#define PCI_CLASS_DISPLAY_3D 0x0302 -+#define PCI_CLASS_DISPLAY_OTHER 0x0380 -+ -+#define PCI_BASE_CLASS_MULTIMEDIA 0x04 -+#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400 -+#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401 -+#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402 -+#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480 -+ -+#define PCI_BASE_CLASS_MEMORY 0x05 -+#define PCI_CLASS_MEMORY_RAM 0x0500 -+#define PCI_CLASS_MEMORY_FLASH 0x0501 -+#define PCI_CLASS_MEMORY_OTHER 0x0580 -+ -+#define PCI_BASE_CLASS_BRIDGE 0x06 -+#define PCI_CLASS_BRIDGE_HOST 0x0600 -+#define PCI_CLASS_BRIDGE_ISA 0x0601 -+#define PCI_CLASS_BRIDGE_EISA 0x0602 -+#define PCI_CLASS_BRIDGE_MC 0x0603 -+#define PCI_CLASS_BRIDGE_PCI 0x0604 -+#define PCI_CLASS_BRIDGE_PCMCIA 0x0605 -+#define PCI_CLASS_BRIDGE_NUBUS 0x0606 -+#define PCI_CLASS_BRIDGE_CARDBUS 0x0607 -+#define PCI_CLASS_BRIDGE_RACEWAY 0x0608 -+#define PCI_CLASS_BRIDGE_OTHER 0x0680 -+ -+#define PCI_BASE_CLASS_COMMUNICATION 0x07 -+#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700 -+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701 -+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702 -+#define PCI_CLASS_COMMUNICATION_MODEM 0x0703 -+#define PCI_CLASS_COMMUNICATION_OTHER 0x0780 -+ -+#define PCI_BASE_CLASS_SYSTEM 0x08 -+#define PCI_CLASS_SYSTEM_PIC 0x0800 -+#define PCI_CLASS_SYSTEM_DMA 0x0801 -+#define PCI_CLASS_SYSTEM_TIMER 0x0802 -+#define PCI_CLASS_SYSTEM_RTC 0x0803 -+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804 -+#define PCI_CLASS_SYSTEM_OTHER 0x0880 -+ -+#define PCI_BASE_CLASS_INPUT 0x09 -+#define PCI_CLASS_INPUT_KEYBOARD 0x0900 -+#define PCI_CLASS_INPUT_PEN 0x0901 -+#define PCI_CLASS_INPUT_MOUSE 0x0902 -+#define PCI_CLASS_INPUT_SCANNER 0x0903 -+#define PCI_CLASS_INPUT_GAMEPORT 0x0904 -+#define PCI_CLASS_INPUT_OTHER 0x0980 -+ -+#define PCI_BASE_CLASS_DOCKING 0x0a -+#define PCI_CLASS_DOCKING_GENERIC 0x0a00 -+#define PCI_CLASS_DOCKING_OTHER 0x0a80 -+ -+#define PCI_BASE_CLASS_PROCESSOR 0x0b -+#define PCI_CLASS_PROCESSOR_386 0x0b00 -+#define PCI_CLASS_PROCESSOR_486 0x0b01 -+#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02 -+#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10 -+#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20 -+#define PCI_CLASS_PROCESSOR_MIPS 0x0b30 -+#define PCI_CLASS_PROCESSOR_CO 0x0b40 -+ -+#define PCI_BASE_CLASS_SERIAL 0x0c -+#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 -+#define PCI_CLASS_SERIAL_ACCESS 0x0c01 -+#define PCI_CLASS_SERIAL_SSA 0x0c02 -+#define PCI_CLASS_SERIAL_USB 0x0c03 -+#define PCI_CLASS_SERIAL_FIBER 0x0c04 -+#define PCI_CLASS_SERIAL_SMBUS 0x0c05 -+ -+#define PCI_BASE_CLASS_INTELLIGENT 0x0e -+#define PCI_CLASS_INTELLIGENT_I2O 0x0e00 -+ -+#define PCI_BASE_CLASS_SATELLITE 0x0f -+#define PCI_CLASS_SATELLITE_TV 0x0f00 -+#define PCI_CLASS_SATELLITE_AUDIO 0x0f01 -+#define PCI_CLASS_SATELLITE_VOICE 0x0f03 -+#define PCI_CLASS_SATELLITE_DATA 0x0f04 -+ -+#define PCI_BASE_CLASS_CRYPT 0x10 -+#define PCI_CLASS_CRYPT_NETWORK 0x1000 -+#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001 -+#define PCI_CLASS_CRYPT_OTHER 0x1080 -+ -+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11 -+#define PCI_CLASS_SP_DPIO 0x1100 -+#define PCI_CLASS_SP_OTHER 0x1180 -+ -+#define PCI_CLASS_OTHERS 0xff -+ -+/* Vendors and devices. Sort key: vendor first, device next. */ -+ -+#define PCI_VENDOR_ID_DYNALINK 0x0675 -+#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702 -+ -+#define PCI_VENDOR_ID_BERKOM 0x0871 -+#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1 -+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2 -+#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4 -+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8 -+ -+#define PCI_VENDOR_ID_COMPAQ 0x0e11 -+#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 -+#define PCI_DEVICE_ID_COMPAQ_1280 0x3033 -+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX 0x4000 -+#define PCI_DEVICE_ID_COMPAQ_6010 0x6010 -+#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc -+#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10 -+#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32 -+#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34 -+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33 -+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35 -+#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40 -+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43 -+#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011 -+#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060 -+#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178 -+#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46 -+#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130 -+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150 -+ -+#define PCI_VENDOR_ID_NCR 0x1000 -+#define PCI_VENDOR_ID_LSI_LOGIC 0x1000 -+#define PCI_DEVICE_ID_NCR_53C810 0x0001 -+#define PCI_DEVICE_ID_NCR_53C820 0x0002 -+#define PCI_DEVICE_ID_NCR_53C825 0x0003 -+#define PCI_DEVICE_ID_NCR_53C815 0x0004 -+#define PCI_DEVICE_ID_LSI_53C810AP 0x0005 -+#define PCI_DEVICE_ID_NCR_53C860 0x0006 -+#define PCI_DEVICE_ID_LSI_53C1510 0x000a -+#define PCI_DEVICE_ID_NCR_53C896 0x000b -+#define PCI_DEVICE_ID_NCR_53C895 0x000c -+#define PCI_DEVICE_ID_NCR_53C885 0x000d -+#define PCI_DEVICE_ID_NCR_53C875 0x000f -+#define PCI_DEVICE_ID_NCR_53C1510 0x0010 -+#define PCI_DEVICE_ID_LSI_53C895A 0x0012 -+#define PCI_DEVICE_ID_LSI_53C875A 0x0013 -+#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020 -+#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021 -+#define PCI_DEVICE_ID_LSI_53C1030 0x0030 -+#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032 -+#define PCI_DEVICE_ID_LSI_53C1035 0x0040 -+#define PCI_DEVICE_ID_NCR_53C875J 0x008f -+#define PCI_DEVICE_ID_LSI_FC909 0x0621 -+#define PCI_DEVICE_ID_LSI_FC929 0x0622 -+#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623 -+#define PCI_DEVICE_ID_LSI_FC919 0x0624 -+#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625 -+#define PCI_DEVICE_ID_LSI_FC929X 0x0626 -+#define PCI_DEVICE_ID_LSI_FC939X 0x0642 -+#define PCI_DEVICE_ID_LSI_FC949X 0x0640 -+#define PCI_DEVICE_ID_LSI_FC919X 0x0628 -+#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701 -+#define PCI_DEVICE_ID_LSI_61C102 0x0901 -+#define PCI_DEVICE_ID_LSI_63C815 0x1000 -+#define PCI_DEVICE_ID_LSI_SAS1064 0x0050 -+#define PCI_DEVICE_ID_LSI_SAS1066 0x005E -+#define PCI_DEVICE_ID_LSI_SAS1068 0x0054 -+#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C -+#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056 -+#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A -+#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058 -+#define PCI_DEVICE_ID_LSI_SAS1078 0x0060 -+ -+#define PCI_VENDOR_ID_ATI 0x1002 -+/* Mach64 */ -+#define PCI_DEVICE_ID_ATI_68800 0x4158 -+#define PCI_DEVICE_ID_ATI_215CT222 0x4354 -+#define PCI_DEVICE_ID_ATI_210888CX 0x4358 -+#define PCI_DEVICE_ID_ATI_215ET222 0x4554 -+/* Mach64 / Rage */ -+#define PCI_DEVICE_ID_ATI_215GB 0x4742 -+#define PCI_DEVICE_ID_ATI_215GD 0x4744 -+#define PCI_DEVICE_ID_ATI_215GI 0x4749 -+#define PCI_DEVICE_ID_ATI_215GP 0x4750 -+#define PCI_DEVICE_ID_ATI_215GQ 0x4751 -+#define PCI_DEVICE_ID_ATI_215XL 0x4752 -+#define PCI_DEVICE_ID_ATI_215GT 0x4754 -+#define PCI_DEVICE_ID_ATI_215GTB 0x4755 -+#define PCI_DEVICE_ID_ATI_215_IV 0x4756 -+#define PCI_DEVICE_ID_ATI_215_IW 0x4757 -+#define PCI_DEVICE_ID_ATI_215_IZ 0x475A -+#define PCI_DEVICE_ID_ATI_210888GX 0x4758 -+#define PCI_DEVICE_ID_ATI_215_LB 0x4c42 -+#define PCI_DEVICE_ID_ATI_215_LD 0x4c44 -+#define PCI_DEVICE_ID_ATI_215_LG 0x4c47 -+#define PCI_DEVICE_ID_ATI_215_LI 0x4c49 -+#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D -+#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E -+#define PCI_DEVICE_ID_ATI_215_LR 0x4c52 -+#define PCI_DEVICE_ID_ATI_215_LS 0x4c53 -+#define PCI_DEVICE_ID_ATI_264_LT 0x4c54 -+/* Mach64 VT */ -+#define PCI_DEVICE_ID_ATI_264VT 0x5654 -+#define PCI_DEVICE_ID_ATI_264VU 0x5655 -+#define PCI_DEVICE_ID_ATI_264VV 0x5656 -+/* Rage128 GL */ -+#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245 -+#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246 -+#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247 -+/* Rage128 VR */ -+#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b -+#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c -+#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345 -+#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346 -+#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347 -+#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348 -+#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b -+#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c -+#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d -+#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e -+/* Rage128 Ultra */ -+#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446 -+#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c -+#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 -+#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453 -+#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454 -+#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455 -+/* Rage128 M3 */ -+#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45 -+#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46 -+/* Rage128 M4 */ -+#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46 -+#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c -+/* Rage128 Pro GL */ -+#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041 -+#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042 -+#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043 -+#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044 -+#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045 -+#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046 -+/* Rage128 Pro VR */ -+#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047 -+#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048 -+#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049 -+#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A -+#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B -+#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C -+#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D -+#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E -+#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F -+#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050 -+#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051 -+#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052 -+#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 -+#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053 -+#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054 -+#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055 -+#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056 -+#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057 -+#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058 -+/* Rage128 M4 */ -+#define PCI_DEVICE_ID_ATI_RADEON_LE 0x4d45 -+#define PCI_DEVICE_ID_ATI_RADEON_LF 0x4d46 -+/* Radeon R100 */ -+#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144 -+#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145 -+#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146 -+#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147 -+/* Radeon RV100 (VE) */ -+#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159 -+#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a -+/* Radeon R200 (8500) */ -+#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c -+#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e -+#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f -+#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c -+#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242 -+/* Radeon R200 (9100) */ -+#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d -+/* Radeon RV200 (7500) */ -+#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157 -+#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158 -+/* Radeon NV-100 */ -+#define PCI_DEVICE_ID_ATI_RADEON_N1 0x5159 -+#define PCI_DEVICE_ID_ATI_RADEON_N2 0x515a -+/* Radeon RV250 (9000) */ -+#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964 -+#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965 -+#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966 -+#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967 -+/* Radeon RV280 (9200) */ -+#define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960 -+#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961 -+#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964 -+/* Radeon R300 (9500) */ -+#define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144 -+/* Radeon R300 (9700) */ -+#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44 -+#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45 -+#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46 -+#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47 -+#define PCI_DEVICE_ID_ATI_RADEON_AE 0x4145 -+#define PCI_DEVICE_ID_ATI_RADEON_AF 0x4146 -+/* Radeon R350 (9800) */ -+#define PCI_DEVICE_ID_ATI_RADEON_NH 0x4e48 -+#define PCI_DEVICE_ID_ATI_RADEON_NI 0x4e49 -+/* Radeon RV350 (9600) */ -+#define PCI_DEVICE_ID_ATI_RADEON_AP 0x4150 -+#define PCI_DEVICE_ID_ATI_RADEON_AR 0x4152 -+/* Radeon M6 */ -+#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59 -+#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a -+/* Radeon M7 */ -+#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57 -+#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58 -+/* Radeon M9 */ -+#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64 -+#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65 -+#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66 -+#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67 -+/* Radeon */ -+#define PCI_DEVICE_ID_ATI_RADEON_RA 0x5144 -+#define PCI_DEVICE_ID_ATI_RADEON_RB 0x5145 -+#define PCI_DEVICE_ID_ATI_RADEON_RC 0x5146 -+#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147 -+/* RadeonIGP */ -+#define PCI_DEVICE_ID_ATI_RS100 0xcab0 -+#define PCI_DEVICE_ID_ATI_RS200 0xcab2 -+#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2 -+#define PCI_DEVICE_ID_ATI_RS250 0xcab3 -+#define PCI_DEVICE_ID_ATI_RS300_100 0x5830 -+#define PCI_DEVICE_ID_ATI_RS300_133 0x5831 -+#define PCI_DEVICE_ID_ATI_RS300_166 0x5832 -+#define PCI_DEVICE_ID_ATI_RS300_200 0x5833 -+#define PCI_DEVICE_ID_ATI_RS350_100 0x7830 -+#define PCI_DEVICE_ID_ATI_RS350_133 0x7831 -+#define PCI_DEVICE_ID_ATI_RS350_166 0x7832 -+#define PCI_DEVICE_ID_ATI_RS350_200 0x7833 -+#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30 -+#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31 -+#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32 -+#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33 -+#define PCI_DEVICE_ID_ATI_RS480 0x5950 -+/* ATI IXP Chipset */ -+#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349 -+#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369 -+#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e -+#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376 -+#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379 -+ -+#define PCI_VENDOR_ID_VLSI 0x1004 -+#define PCI_DEVICE_ID_VLSI_82C592 0x0005 -+#define PCI_DEVICE_ID_VLSI_82C593 0x0006 -+#define PCI_DEVICE_ID_VLSI_82C594 0x0007 -+#define PCI_DEVICE_ID_VLSI_82C597 0x0009 -+#define PCI_DEVICE_ID_VLSI_82C541 0x000c -+#define PCI_DEVICE_ID_VLSI_82C543 0x000d -+#define PCI_DEVICE_ID_VLSI_82C532 0x0101 -+#define PCI_DEVICE_ID_VLSI_82C534 0x0102 -+#define PCI_DEVICE_ID_VLSI_82C535 0x0104 -+#define PCI_DEVICE_ID_VLSI_82C147 0x0105 -+#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702 -+ -+#define PCI_VENDOR_ID_ADL 0x1005 -+#define PCI_DEVICE_ID_ADL_2301 0x2301 -+ -+#define PCI_VENDOR_ID_NS 0x100b -+#define PCI_DEVICE_ID_NS_87415 0x0002 -+#define PCI_DEVICE_ID_NS_87560_LIO 0x000e -+#define PCI_DEVICE_ID_NS_87560_USB 0x0012 -+#define PCI_DEVICE_ID_NS_83815 0x0020 -+#define PCI_DEVICE_ID_NS_83820 0x0022 -+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500 -+#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501 -+#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502 -+#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503 -+#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504 -+#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505 -+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510 -+#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511 -+#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515 -+#define PCI_DEVICE_ID_NS_87410 0xd001 -+ -+#define PCI_VENDOR_ID_TSENG 0x100c -+#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202 -+#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205 -+#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206 -+#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207 -+#define PCI_DEVICE_ID_TSENG_ET6000 0x3208 -+ -+#define PCI_VENDOR_ID_WEITEK 0x100e -+#define PCI_DEVICE_ID_WEITEK_P9000 0x9001 -+#define PCI_DEVICE_ID_WEITEK_P9100 0x9100 -+ -+#define PCI_VENDOR_ID_DEC 0x1011 -+#define PCI_DEVICE_ID_DEC_BRD 0x0001 -+#define PCI_DEVICE_ID_DEC_TULIP 0x0002 -+#define PCI_DEVICE_ID_DEC_TGA 0x0004 -+#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009 -+#define PCI_DEVICE_ID_DEC_TGA2 0x000D -+#define PCI_DEVICE_ID_DEC_FDDI 0x000F -+#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014 -+#define PCI_DEVICE_ID_DEC_21142 0x0019 -+#define PCI_DEVICE_ID_DEC_21052 0x0021 -+#define PCI_DEVICE_ID_DEC_21150 0x0022 -+#define PCI_DEVICE_ID_DEC_21152 0x0024 -+#define PCI_DEVICE_ID_DEC_21153 0x0025 -+#define PCI_DEVICE_ID_DEC_21154 0x0026 -+#define PCI_DEVICE_ID_DEC_21285 0x1065 -+#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046 -+ -+#define PCI_VENDOR_ID_CIRRUS 0x1013 -+#define PCI_DEVICE_ID_CIRRUS_7548 0x0038 -+#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0 -+#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4 -+#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8 -+#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac -+#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8 -+#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc -+#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0 -+#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4 -+#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6 -+#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 -+#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 -+#define PCI_DEVICE_ID_CIRRUS_7542 0x1200 -+#define PCI_DEVICE_ID_CIRRUS_7543 0x1202 -+#define PCI_DEVICE_ID_CIRRUS_7541 0x1204 -+ -+#define PCI_VENDOR_ID_IBM 0x1014 -+#define PCI_DEVICE_ID_IBM_FIRE_CORAL 0x000a -+#define PCI_DEVICE_ID_IBM_TR 0x0018 -+#define PCI_DEVICE_ID_IBM_82G2675 0x001d -+#define PCI_DEVICE_ID_IBM_MCA 0x0020 -+#define PCI_DEVICE_ID_IBM_82351 0x0022 -+#define PCI_DEVICE_ID_IBM_PYTHON 0x002d -+#define PCI_DEVICE_ID_IBM_SERVERAID 0x002e -+#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e -+#define PCI_DEVICE_ID_IBM_MPIC 0x0046 -+#define PCI_DEVICE_ID_IBM_3780IDSP 0x007d -+#define PCI_DEVICE_ID_IBM_CHUKAR 0x0096 -+#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc -+#define PCI_DEVICE_ID_IBM_CPC710_PCI32 0x0105 -+#define PCI_DEVICE_ID_IBM_405GP 0x0156 -+#define PCI_DEVICE_ID_IBM_SNIPE 0x0180 -+#define PCI_DEVICE_ID_IBM_SERVERAIDI960 0x01bd -+#define PCI_DEVICE_ID_IBM_CITRINE 0x028C -+#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166 -+#define PCI_DEVICE_ID_IBM_MPIC_2 0xffff -+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031 -+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219 -+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A -+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251 -+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 -+ -+#define PCI_VENDOR_ID_COMPEX2 0x101a // pci.ids says "AT&T GIS (NCR)" -+#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005 -+ -+#define PCI_VENDOR_ID_WD 0x101c -+#define PCI_DEVICE_ID_WD_7197 0x3296 -+#define PCI_DEVICE_ID_WD_90C 0xc24a -+ -+#define PCI_VENDOR_ID_AMI 0x101e -+#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960 -+#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010 -+#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060 -+ -+#define PCI_VENDOR_ID_AMD 0x1022 -+#define PCI_DEVICE_ID_AMD_LANCE 0x2000 -+#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 -+#define PCI_DEVICE_ID_AMD_SCSI 0x2020 -+#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0 -+#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006 -+#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007 -+#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C -+#define PCI_DEVICE_ID_AMD_FE_GATE_700D 0x700D -+#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E -+#define PCI_DEVICE_ID_AMD_FE_GATE_700F 0x700F -+#define PCI_DEVICE_ID_AMD_COBRA_7400 0x7400 -+#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401 -+#define PCI_DEVICE_ID_AMD_COBRA_7403 0x7403 -+#define PCI_DEVICE_ID_AMD_COBRA_7404 0x7404 -+#define PCI_DEVICE_ID_AMD_VIPER_7408 0x7408 -+#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409 -+#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B -+#define PCI_DEVICE_ID_AMD_VIPER_740C 0x740C -+#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410 -+#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411 -+#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 -+#define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414 -+#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440 -+# define PCI_DEVICE_ID_AMD_VIPER_7440 PCI_DEVICE_ID_AMD_OPUS_7440 -+#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 -+# define PCI_DEVICE_ID_AMD_VIPER_7441 PCI_DEVICE_ID_AMD_OPUS_7441 -+#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 -+# define PCI_DEVICE_ID_AMD_VIPER_7443 PCI_DEVICE_ID_AMD_OPUS_7443 -+#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445 -+#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448 -+# define PCI_DEVICE_ID_AMD_VIPER_7448 PCI_DEVICE_ID_AMD_OPUS_7448 -+#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449 -+# define PCI_DEVICE_ID_AMD_VIPER_7449 PCI_DEVICE_ID_AMD_OPUS_7449 -+#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462 -+#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468 -+#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 -+#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a -+#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b -+#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d -+#define PCI_DEVICE_ID_AMD_8151_0 0x7454 -+#define PCI_DEVICE_ID_AMD_8131_APIC 0x7450 -+ -+#define PCI_VENDOR_ID_TRIDENT 0x1023 -+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 -+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001 -+#define PCI_DEVICE_ID_TRIDENT_9320 0x9320 -+#define PCI_DEVICE_ID_TRIDENT_9388 0x9388 -+#define PCI_DEVICE_ID_TRIDENT_9397 0x9397 -+#define PCI_DEVICE_ID_TRIDENT_939A 0x939A -+#define PCI_DEVICE_ID_TRIDENT_9520 0x9520 -+#define PCI_DEVICE_ID_TRIDENT_9525 0x9525 -+#define PCI_DEVICE_ID_TRIDENT_9420 0x9420 -+#define PCI_DEVICE_ID_TRIDENT_9440 0x9440 -+#define PCI_DEVICE_ID_TRIDENT_9660 0x9660 -+#define PCI_DEVICE_ID_TRIDENT_9750 0x9750 -+#define PCI_DEVICE_ID_TRIDENT_9850 0x9850 -+#define PCI_DEVICE_ID_TRIDENT_9880 0x9880 -+#define PCI_DEVICE_ID_TRIDENT_8400 0x8400 -+#define PCI_DEVICE_ID_TRIDENT_8420 0x8420 -+#define PCI_DEVICE_ID_TRIDENT_8500 0x8500 -+ -+#define PCI_VENDOR_ID_AI 0x1025 -+#define PCI_DEVICE_ID_AI_M1435 0x1435 -+ -+#define PCI_VENDOR_ID_DELL 0x1028 -+#define PCI_DEVICE_ID_DELL_RACIII 0x0008 -+#define PCI_DEVICE_ID_DELL_RAC4 0x0012 -+ -+#define PCI_VENDOR_ID_MATROX 0x102B -+#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518 -+#define PCI_DEVICE_ID_MATROX_MIL 0x0519 -+#define PCI_DEVICE_ID_MATROX_MYS 0x051A -+#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b -+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f -+#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10 -+#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000 -+#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001 -+#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 -+#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 -+#define PCI_DEVICE_ID_MATROX_G400 0x0525 -+#define PCI_DEVICE_ID_MATROX_G550 0x2527 -+#define PCI_DEVICE_ID_MATROX_VIA 0x4536 -+ -+#define PCI_VENDOR_ID_CT 0x102c -+#define PCI_DEVICE_ID_CT_69000 0x00c0 -+#define PCI_DEVICE_ID_CT_65545 0x00d8 -+#define PCI_DEVICE_ID_CT_65548 0x00dc -+#define PCI_DEVICE_ID_CT_65550 0x00e0 -+#define PCI_DEVICE_ID_CT_65554 0x00e4 -+#define PCI_DEVICE_ID_CT_65555 0x00e5 -+ -+#define PCI_VENDOR_ID_MIRO 0x1031 -+#define PCI_DEVICE_ID_MIRO_36050 0x5601 -+#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe -+#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801 -+ -+#define PCI_VENDOR_ID_NEC 0x1033 -+#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */ -+#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */ -+#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */ -+#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */ -+#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */ -+#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */ -+#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */ -+#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */ -+#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */ -+#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */ -+#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */ -+#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */ -+#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */ -+#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b -+#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e -+#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */ -+#define PCI_DEVICE_ID_NEC_NILE4 0x005a -+#define PCI_DEVICE_ID_NEC_VRC5476 0x009b -+#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5 -+#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6 -+#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */ -+#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */ -+ -+#define PCI_VENDOR_ID_FD 0x1036 -+#define PCI_DEVICE_ID_FD_36C70 0x0000 -+ -+#define PCI_VENDOR_ID_SI 0x1039 -+#define PCI_DEVICE_ID_SI_5591_AGP 0x0001 -+#define PCI_DEVICE_ID_SI_6202 0x0002 -+#define PCI_DEVICE_ID_SI_503 0x0008 -+#define PCI_DEVICE_ID_SI_ACPI 0x0009 -+#define PCI_DEVICE_ID_SI_SMBUS 0x0016 -+#define PCI_DEVICE_ID_SI_LPC 0x0018 -+#define PCI_DEVICE_ID_SI_5597_VGA 0x0200 -+#define PCI_DEVICE_ID_SI_6205 0x0205 -+#define PCI_DEVICE_ID_SI_501 0x0406 -+#define PCI_DEVICE_ID_SI_496 0x0496 -+#define PCI_DEVICE_ID_SI_300 0x0300 -+#define PCI_DEVICE_ID_SI_315H 0x0310 -+#define PCI_DEVICE_ID_SI_315 0x0315 -+#define PCI_DEVICE_ID_SI_315PRO 0x0325 -+#define PCI_DEVICE_ID_SI_530 0x0530 -+#define PCI_DEVICE_ID_SI_540 0x0540 -+#define PCI_DEVICE_ID_SI_550 0x0550 -+#define PCI_DEVICE_ID_SI_540_VGA 0x5300 -+#define PCI_DEVICE_ID_SI_550_VGA 0x5315 -+#define PCI_DEVICE_ID_SI_601 0x0601 -+#define PCI_DEVICE_ID_SI_620 0x0620 -+#define PCI_DEVICE_ID_SI_630 0x0630 -+#define PCI_DEVICE_ID_SI_633 0x0633 -+#define PCI_DEVICE_ID_SI_635 0x0635 -+#define PCI_DEVICE_ID_SI_640 0x0640 -+#define PCI_DEVICE_ID_SI_645 0x0645 -+#define PCI_DEVICE_ID_SI_646 0x0646 -+#define PCI_DEVICE_ID_SI_648 0x0648 -+#define PCI_DEVICE_ID_SI_650 0x0650 -+#define PCI_DEVICE_ID_SI_651 0x0651 -+#define PCI_DEVICE_ID_SI_652 0x0652 -+#define PCI_DEVICE_ID_SI_655 0x0655 -+#define PCI_DEVICE_ID_SI_661 0x0661 -+#define PCI_DEVICE_ID_SI_730 0x0730 -+#define PCI_DEVICE_ID_SI_733 0x0733 -+#define PCI_DEVICE_ID_SI_630_VGA 0x6300 -+#define PCI_DEVICE_ID_SI_730_VGA 0x7300 -+#define PCI_DEVICE_ID_SI_735 0x0735 -+#define PCI_DEVICE_ID_SI_740 0x0740 -+#define PCI_DEVICE_ID_SI_741 0x0741 -+#define PCI_DEVICE_ID_SI_745 0x0745 -+#define PCI_DEVICE_ID_SI_746 0x0746 -+#define PCI_DEVICE_ID_SI_748 0x0748 -+#define PCI_DEVICE_ID_SI_750 0x0750 -+#define PCI_DEVICE_ID_SI_751 0x0751 -+#define PCI_DEVICE_ID_SI_752 0x0752 -+#define PCI_DEVICE_ID_SI_755 0x0755 -+#define PCI_DEVICE_ID_SI_760 0x0760 -+#define PCI_DEVICE_ID_SI_900 0x0900 -+#define PCI_DEVICE_ID_SI_961 0x0961 -+#define PCI_DEVICE_ID_SI_962 0x0962 -+#define PCI_DEVICE_ID_SI_963 0x0963 -+#define PCI_DEVICE_ID_SI_5107 0x5107 -+#define PCI_DEVICE_ID_SI_5300 0x5300 -+#define PCI_DEVICE_ID_SI_5511 0x5511 -+#define PCI_DEVICE_ID_SI_5513 0x5513 -+#define PCI_DEVICE_ID_SI_5518 0x5518 -+#define PCI_DEVICE_ID_SI_5571 0x5571 -+#define PCI_DEVICE_ID_SI_5581 0x5581 -+#define PCI_DEVICE_ID_SI_5582 0x5582 -+#define PCI_DEVICE_ID_SI_5591 0x5591 -+#define PCI_DEVICE_ID_SI_5596 0x5596 -+#define PCI_DEVICE_ID_SI_5597 0x5597 -+#define PCI_DEVICE_ID_SI_5598 0x5598 -+#define PCI_DEVICE_ID_SI_5600 0x5600 -+#define PCI_DEVICE_ID_SI_6300 0x6300 -+#define PCI_DEVICE_ID_SI_6306 0x6306 -+#define PCI_DEVICE_ID_SI_6326 0x6326 -+#define PCI_DEVICE_ID_SI_7001 0x7001 -+#define PCI_DEVICE_ID_SI_7012 0x7012 -+#define PCI_DEVICE_ID_SI_7016 0x7016 -+ -+#define PCI_VENDOR_ID_HP 0x103c -+#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005 -+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006 -+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008 -+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a -+#define PCI_DEVICE_ID_HP_TACHYON 0x1028 -+#define PCI_DEVICE_ID_HP_TACHLITE 0x1029 -+#define PCI_DEVICE_ID_HP_J2585A 0x1030 -+#define PCI_DEVICE_ID_HP_J2585B 0x1031 -+#define PCI_DEVICE_ID_HP_J2973A 0x1040 -+#define PCI_DEVICE_ID_HP_J2970A 0x1042 -+#define PCI_DEVICE_ID_HP_DIVA 0x1048 -+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049 -+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A -+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B -+#define PCI_DEVICE_ID_HP_PCI_LBA 0x1054 -+#define PCI_DEVICE_ID_HP_REO_SBA 0x10f0 -+#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1 -+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b -+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223 -+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226 -+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227 -+#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229 -+#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a -+#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e -+#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c -+#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 -+#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 -+#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 -+#define PCI_DEVICE_ID_HP_CISSA 0x3220 -+#define PCI_DEVICE_ID_HP_CISSB 0x3230 -+#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 -+ -+#define PCI_VENDOR_ID_PCTECH 0x1042 -+#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000 -+#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001 -+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0 0x3000 -+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1 0x3010 -+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020 -+ -+#define PCI_VENDOR_ID_ASUSTEK 0x1043 -+#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675 -+ -+#define PCI_VENDOR_ID_DPT 0x1044 -+#define PCI_DEVICE_ID_DPT 0xa400 -+ -+#define PCI_VENDOR_ID_OPTI 0x1045 -+#define PCI_DEVICE_ID_OPTI_92C178 0xc178 -+#define PCI_DEVICE_ID_OPTI_82C557 0xc557 -+#define PCI_DEVICE_ID_OPTI_82C558 0xc558 -+#define PCI_DEVICE_ID_OPTI_82C621 0xc621 -+#define PCI_DEVICE_ID_OPTI_82C700 0xc700 -+#define PCI_DEVICE_ID_OPTI_82C701 0xc701 -+#define PCI_DEVICE_ID_OPTI_82C814 0xc814 -+#define PCI_DEVICE_ID_OPTI_82C822 0xc822 -+#define PCI_DEVICE_ID_OPTI_82C861 0xc861 -+#define PCI_DEVICE_ID_OPTI_82C825 0xd568 -+ -+#define PCI_VENDOR_ID_ELSA 0x1048 -+#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000 -+#define PCI_DEVICE_ID_ELSA_QS3000 0x3000 -+ -+#define PCI_VENDOR_ID_SGS 0x104a -+#define PCI_DEVICE_ID_SGS_2000 0x0008 -+#define PCI_DEVICE_ID_SGS_1764 0x0009 -+ -+#define PCI_VENDOR_ID_BUSLOGIC 0x104B -+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 -+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040 -+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130 -+ -+#define PCI_VENDOR_ID_TI 0x104c -+#define PCI_DEVICE_ID_TI_TVP4010 0x3d04 -+#define PCI_DEVICE_ID_TI_TVP4020 0x3d07 -+#define PCI_DEVICE_ID_TI_4450 0x8011 -+#define PCI_DEVICE_ID_TI_1130 0xac12 -+#define PCI_DEVICE_ID_TI_1031 0xac13 -+#define PCI_DEVICE_ID_TI_1131 0xac15 -+#define PCI_DEVICE_ID_TI_1250 0xac16 -+#define PCI_DEVICE_ID_TI_1220 0xac17 -+#define PCI_DEVICE_ID_TI_1221 0xac19 -+#define PCI_DEVICE_ID_TI_1210 0xac1a -+#define PCI_DEVICE_ID_TI_1450 0xac1b -+#define PCI_DEVICE_ID_TI_1225 0xac1c -+#define PCI_DEVICE_ID_TI_1251A 0xac1d -+#define PCI_DEVICE_ID_TI_1211 0xac1e -+#define PCI_DEVICE_ID_TI_1251B 0xac1f -+#define PCI_DEVICE_ID_TI_4410 0xac41 -+#define PCI_DEVICE_ID_TI_4451 0xac42 -+#define PCI_DEVICE_ID_TI_4510 0xac44 -+#define PCI_DEVICE_ID_TI_4520 0xac46 -+#define PCI_DEVICE_ID_TI_1410 0xac50 -+#define PCI_DEVICE_ID_TI_1420 0xac51 -+#define PCI_DEVICE_ID_TI_1451A 0xac52 -+#define PCI_DEVICE_ID_TI_1620 0xac54 -+#define PCI_DEVICE_ID_TI_1520 0xac55 -+#define PCI_DEVICE_ID_TI_1510 0xac56 -+ -+#define PCI_VENDOR_ID_SONY 0x104d -+#define PCI_DEVICE_ID_SONY_CXD3222 0x8039 -+ -+#define PCI_VENDOR_ID_OAK 0x104e -+#define PCI_DEVICE_ID_OAK_OTI107 0x0107 -+ -+/* Winbond have two vendor IDs! See 0x10ad as well */ -+#define PCI_VENDOR_ID_WINBOND2 0x1050 -+#define PCI_DEVICE_ID_WINBOND2_89C940 0x0940 -+#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a -+#define PCI_DEVICE_ID_WINBOND2_6692 0x6692 -+ -+#define PCI_VENDOR_ID_ANIGMA 0x1051 -+#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100 -+ -+#define PCI_VENDOR_ID_EFAR 0x1055 -+#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130 -+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 -+#define PCI_DEVICE_ID_EFAR_SLC90E66_2 0x9462 -+#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463 -+ -+#define PCI_VENDOR_ID_MOTOROLA 0x1057 -+#define PCI_VENDOR_ID_MOTOROLA_OOPS 0x1507 -+#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001 -+#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002 -+#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004 -+#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801 -+#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802 -+#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803 -+#define PCI_DEVICE_ID_MOTOROLA_CPX8216 0x4806 -+#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b -+#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803 -+ -+#define PCI_VENDOR_ID_PROMISE 0x105a -+#define PCI_DEVICE_ID_PROMISE_20265 0x0d30 -+#define PCI_DEVICE_ID_PROMISE_20267 0x4d30 -+#define PCI_DEVICE_ID_PROMISE_20246 0x4d33 -+#define PCI_DEVICE_ID_PROMISE_20262 0x4d38 -+#define PCI_DEVICE_ID_PROMISE_20263 0x0D38 -+#define PCI_DEVICE_ID_PROMISE_20268 0x4d68 -+#define PCI_DEVICE_ID_PROMISE_20268R 0x6268 -+#define PCI_DEVICE_ID_PROMISE_20269 0x4d69 -+#define PCI_DEVICE_ID_PROMISE_20270 0x6268 -+#define PCI_DEVICE_ID_PROMISE_20271 0x6269 -+#define PCI_DEVICE_ID_PROMISE_20275 0x1275 -+#define PCI_DEVICE_ID_PROMISE_20276 0x5275 -+#define PCI_DEVICE_ID_PROMISE_20277 0x7275 -+#define PCI_DEVICE_ID_PROMISE_5300 0x5300 -+ -+#define PCI_VENDOR_ID_N9 0x105d -+#define PCI_DEVICE_ID_N9_I128 0x2309 -+#define PCI_DEVICE_ID_N9_I128_2 0x2339 -+#define PCI_DEVICE_ID_N9_I128_T2R 0x493d -+ -+#define PCI_VENDOR_ID_UMC 0x1060 -+#define PCI_DEVICE_ID_UMC_UM8673F 0x0101 -+#define PCI_DEVICE_ID_UMC_UM8891A 0x0891 -+#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a -+#define PCI_DEVICE_ID_UMC_UM8886A 0x886a -+#define PCI_DEVICE_ID_UMC_UM8881F 0x8881 -+#define PCI_DEVICE_ID_UMC_UM8886F 0x8886 -+#define PCI_DEVICE_ID_UMC_UM9017F 0x9017 -+#define PCI_DEVICE_ID_UMC_UM8886N 0xe886 -+#define PCI_DEVICE_ID_UMC_UM8891N 0xe891 -+ -+#define PCI_VENDOR_ID_X 0x1061 -+#define PCI_DEVICE_ID_X_AGX016 0x0001 -+ -+#define PCI_VENDOR_ID_MYLEX 0x1069 -+#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001 -+#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002 -+#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010 -+#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020 -+#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050 -+#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56 -+#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166 -+ -+#define PCI_VENDOR_ID_PICOP 0x1066 -+#define PCI_DEVICE_ID_PICOP_PT86C52X 0x0001 -+#define PCI_DEVICE_ID_PICOP_PT80C524 0x8002 -+ -+#define PCI_VENDOR_ID_APPLE 0x106b -+#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001 -+#define PCI_DEVICE_ID_APPLE_GC 0x0002 -+#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e -+#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018 -+#define PCI_DEVICE_ID_APPLE_KL_USB 0x0019 -+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020 -+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021 -+#define PCI_DEVICE_ID_APPLE_KEYLARGO 0x0022 -+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024 -+#define PCI_DEVICE_ID_APPLE_KEYLARGO_P 0x0025 -+#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026 -+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 -+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d -+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e -+#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030 -+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 -+#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033 -+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034 -+#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b -+#define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e -+#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043 -+#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b -+#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c -+#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050 -+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 -+#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052 -+#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 -+#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 -+#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645 -+ -+#define PCI_VENDOR_ID_YAMAHA 0x1073 -+#define PCI_DEVICE_ID_YAMAHA_724 0x0004 -+#define PCI_DEVICE_ID_YAMAHA_724F 0x000d -+#define PCI_DEVICE_ID_YAMAHA_740 0x000a -+#define PCI_DEVICE_ID_YAMAHA_740C 0x000c -+#define PCI_DEVICE_ID_YAMAHA_744 0x0010 -+#define PCI_DEVICE_ID_YAMAHA_754 0x0012 -+ -+#define PCI_VENDOR_ID_NEXGEN 0x1074 -+#define PCI_DEVICE_ID_NEXGEN_82C501 0x4e78 -+ -+#define PCI_VENDOR_ID_QLOGIC 0x1077 -+#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020 -+#define PCI_DEVICE_ID_QLOGIC_ISP1022 0x1022 -+#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100 -+#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200 -+ -+#define PCI_VENDOR_ID_CYRIX 0x1078 -+#define PCI_DEVICE_ID_CYRIX_5510 0x0000 -+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001 -+#define PCI_DEVICE_ID_CYRIX_5520 0x0002 -+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100 -+#define PCI_DEVICE_ID_CYRIX_5530_SMI 0x0101 -+#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102 -+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103 -+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104 -+ -+#define PCI_VENDOR_ID_LEADTEK 0x107d -+#define PCI_DEVICE_ID_LEADTEK_805 0x0000 -+ -+#define PCI_VENDOR_ID_INTERPHASE 0x107e -+#define PCI_DEVICE_ID_INTERPHASE_5526 0x0004 -+#define PCI_DEVICE_ID_INTERPHASE_55x6 0x0005 -+#define PCI_DEVICE_ID_INTERPHASE_5575 0x0008 -+ -+#define PCI_VENDOR_ID_CONTAQ 0x1080 -+#define PCI_DEVICE_ID_CONTAQ_82C599 0x0600 -+#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693 -+ -+#define PCI_VENDOR_ID_FOREX 0x1083 -+ -+#define PCI_VENDOR_ID_OLICOM 0x108d -+#define PCI_DEVICE_ID_OLICOM_OC3136 0x0001 -+#define PCI_DEVICE_ID_OLICOM_OC2315 0x0011 -+#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012 -+#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013 -+#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014 -+#define PCI_DEVICE_ID_OLICOM_OC6151 0x0021 -+ -+#define PCI_VENDOR_ID_SUN 0x108e -+#define PCI_DEVICE_ID_SUN_EBUS 0x1000 -+#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001 -+#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100 -+#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101 -+#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102 -+#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103 -+#define PCI_DEVICE_ID_SUN_GEM 0x2bad -+#define PCI_DEVICE_ID_SUN_SIMBA 0x5000 -+#define PCI_DEVICE_ID_SUN_PBM 0x8000 -+#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001 -+#define PCI_DEVICE_ID_SUN_SABRE 0xa000 -+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001 -+#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801 -+ -+#define PCI_VENDOR_ID_CMD 0x1095 -+#define PCI_DEVICE_ID_CMD_640 0x0640 -+#define PCI_DEVICE_ID_CMD_643 0x0643 -+#define PCI_DEVICE_ID_CMD_646 0x0646 -+#define PCI_DEVICE_ID_CMD_647 0x0647 -+#define PCI_DEVICE_ID_CMD_648 0x0648 -+#define PCI_DEVICE_ID_CMD_649 0x0649 -+#define PCI_DEVICE_ID_CMD_670 0x0670 -+#define PCI_DEVICE_ID_CMD_680 0x0680 -+ -+#define PCI_DEVICE_ID_SII_680 0x0680 -+#define PCI_DEVICE_ID_SII_3112 0x3112 -+#define PCI_DEVICE_ID_SII_1210SA 0x0240 -+ -+#define PCI_VENDOR_ID_VISION 0x1098 -+#define PCI_DEVICE_ID_VISION_QD8500 0x0001 -+#define PCI_DEVICE_ID_VISION_QD8580 0x0002 -+ -+#define PCI_VENDOR_ID_BROOKTREE 0x109e -+#define PCI_DEVICE_ID_BROOKTREE_848 0x0350 -+#define PCI_DEVICE_ID_BROOKTREE_849A 0x0351 -+#define PCI_DEVICE_ID_BROOKTREE_878_1 0x036e -+#define PCI_DEVICE_ID_BROOKTREE_878 0x0878 -+#define PCI_DEVICE_ID_BROOKTREE_8474 0x8474 -+ -+#define PCI_VENDOR_ID_SIERRA 0x10a8 -+#define PCI_DEVICE_ID_SIERRA_STB 0x0000 -+ -+#define PCI_VENDOR_ID_SGI 0x10a9 -+#define PCI_DEVICE_ID_SGI_IOC3 0x0003 -+#define PCI_DEVICE_ID_SGI_IOC4 0x100a -+#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002 -+ -+#define PCI_VENDOR_ID_ACC 0x10aa -+#define PCI_DEVICE_ID_ACC_2056 0x0000 -+ -+#define PCI_VENDOR_ID_WINBOND 0x10ad -+#define PCI_DEVICE_ID_WINBOND_83769 0x0001 -+#define PCI_DEVICE_ID_WINBOND_82C105 0x0105 -+#define PCI_DEVICE_ID_WINBOND_83C553 0x0565 -+ -+#define PCI_VENDOR_ID_DATABOOK 0x10b3 -+#define PCI_DEVICE_ID_DATABOOK_87144 0xb106 -+ -+#define PCI_VENDOR_ID_PLX 0x10b5 -+#define PCI_DEVICE_ID_PLX_R685 0x1030 -+#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a -+#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076 -+#define PCI_DEVICE_ID_PLX_1077 0x1077 -+#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103 -+#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151 -+#define PCI_DEVICE_ID_PLX_R753 0x1152 -+#define PCI_DEVICE_ID_PLX_9030 0x9030 -+#define PCI_DEVICE_ID_PLX_9050 0x9050 -+#define PCI_DEVICE_ID_PLX_9060 0x9060 -+#define PCI_DEVICE_ID_PLX_9060ES 0x906E -+#define PCI_DEVICE_ID_PLX_9060SD 0x906D -+#define PCI_DEVICE_ID_PLX_9080 0x9080 -+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001 -+ -+#define PCI_VENDOR_ID_MADGE 0x10b6 -+#define PCI_DEVICE_ID_MADGE_MK2 0x0002 -+#define PCI_DEVICE_ID_MADGE_C155S 0x1001 -+ -+#define PCI_VENDOR_ID_3COM 0x10b7 -+#define PCI_DEVICE_ID_3COM_3C985 0x0001 -+#define PCI_DEVICE_ID_3COM_3C940 0x1700 -+#define PCI_DEVICE_ID_3COM_3C339 0x3390 -+#define PCI_DEVICE_ID_3COM_3C359 0x3590 -+#define PCI_DEVICE_ID_3COM_3C590 0x5900 -+#define PCI_DEVICE_ID_3COM_3C595TX 0x5950 -+#define PCI_DEVICE_ID_3COM_3C595T4 0x5951 -+#define PCI_DEVICE_ID_3COM_3C595MII 0x5952 -+#define PCI_DEVICE_ID_3COM_3C940B 0x80eb -+#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000 -+#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001 -+#define PCI_DEVICE_ID_3COM_3C905TX 0x9050 -+#define PCI_DEVICE_ID_3COM_3C905T4 0x9051 -+#define PCI_DEVICE_ID_3COM_3C905B_TX 0x9055 -+#define PCI_DEVICE_ID_3COM_3CR990 0x9900 -+#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902 -+#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903 -+#define PCI_DEVICE_ID_3COM_3CR990B 0x9904 -+#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905 -+#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908 -+#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909 -+#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a -+ -+#define PCI_VENDOR_ID_SMC 0x10b8 -+#define PCI_DEVICE_ID_SMC_EPIC100 0x0005 -+ -+#define PCI_VENDOR_ID_AL 0x10b9 -+#define PCI_DEVICE_ID_AL_M1445 0x1445 -+#define PCI_DEVICE_ID_AL_M1449 0x1449 -+#define PCI_DEVICE_ID_AL_M1451 0x1451 -+#define PCI_DEVICE_ID_AL_M1461 0x1461 -+#define PCI_DEVICE_ID_AL_M1489 0x1489 -+#define PCI_DEVICE_ID_AL_M1511 0x1511 -+#define PCI_DEVICE_ID_AL_M1513 0x1513 -+#define PCI_DEVICE_ID_AL_M1521 0x1521 -+#define PCI_DEVICE_ID_AL_M1523 0x1523 -+#define PCI_DEVICE_ID_AL_M1531 0x1531 -+#define PCI_DEVICE_ID_AL_M1533 0x1533 -+#define PCI_DEVICE_ID_AL_M1535 0x1535 -+#define PCI_DEVICE_ID_AL_M1541 0x1541 -+#define PCI_DEVICE_ID_AL_M1543 0x1543 -+#define PCI_DEVICE_ID_AL_M1563 0x1563 -+#define PCI_DEVICE_ID_AL_M1621 0x1621 -+#define PCI_DEVICE_ID_AL_M1631 0x1631 -+#define PCI_DEVICE_ID_AL_M1632 0x1632 -+#define PCI_DEVICE_ID_AL_M1641 0x1641 -+#define PCI_DEVICE_ID_AL_M1644 0x1644 -+#define PCI_DEVICE_ID_AL_M1647 0x1647 -+#define PCI_DEVICE_ID_AL_M1651 0x1651 -+#define PCI_DEVICE_ID_AL_M1671 0x1671 -+#define PCI_DEVICE_ID_AL_M1681 0x1681 -+#define PCI_DEVICE_ID_AL_M1683 0x1683 -+#define PCI_DEVICE_ID_AL_M1689 0x1689 -+#define PCI_DEVICE_ID_AL_M3307 0x3307 -+#define PCI_DEVICE_ID_AL_M4803 0x5215 -+#define PCI_DEVICE_ID_AL_M5219 0x5219 -+#define PCI_DEVICE_ID_AL_M5228 0x5228 -+#define PCI_DEVICE_ID_AL_M5229 0x5229 -+#define PCI_DEVICE_ID_AL_M5237 0x5237 -+#define PCI_DEVICE_ID_AL_M5243 0x5243 -+#define PCI_DEVICE_ID_AL_M5451 0x5451 -+#define PCI_DEVICE_ID_AL_M7101 0x7101 -+ -+#define PCI_VENDOR_ID_MITSUBISHI 0x10ba -+ -+#define PCI_VENDOR_ID_SURECOM 0x10bd -+#define PCI_DEVICE_ID_SURECOM_NE34 0x0e34 -+ -+#define PCI_VENDOR_ID_NEOMAGIC 0x10c8 -+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001 -+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002 -+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003 -+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004 -+#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV 0x0005 -+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS 0x0083 -+ -+#define PCI_VENDOR_ID_ASP 0x10cd -+#define PCI_DEVICE_ID_ASP_ABP940 0x1200 -+#define PCI_DEVICE_ID_ASP_ABP940U 0x1300 -+#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 -+ -+#define PCI_VENDOR_ID_MACRONIX 0x10d9 -+#define PCI_DEVICE_ID_MACRONIX_MX98713 0x0512 -+#define PCI_DEVICE_ID_MACRONIX_MX987x5 0x0531 -+ -+#define PCI_VENDOR_ID_TCONRAD 0x10da -+#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508 -+ -+#define PCI_VENDOR_ID_CERN 0x10dc -+#define PCI_DEVICE_ID_CERN_SPSB_PMC 0x0001 -+#define PCI_DEVICE_ID_CERN_SPSB_PCI 0x0002 -+#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021 -+#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022 -+ -+#define PCI_VENDOR_ID_NVIDIA 0x10de -+#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020 -+#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028 -+#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029 -+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a -+#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C -+#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E -+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057 -+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066 -+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a -+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c -+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e -+#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0 -+#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1 -+#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2 -+#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8 -+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9 -+#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc -+#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 -+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6 -+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da -+#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B -+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4 -+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc -+#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266 -+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 -+#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 -+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347 -+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C -+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E -+ -+#define PCI_VENDOR_ID_IMS 0x10e0 -+#define PCI_DEVICE_ID_IMS_8849 0x8849 -+#define PCI_DEVICE_ID_IMS_TT128 0x9128 -+#define PCI_DEVICE_ID_IMS_TT3D 0x9135 -+ -+#define PCI_VENDOR_ID_TEKRAM2 0x10e1 -+#define PCI_DEVICE_ID_TEKRAM2_690c 0x690c -+ -+#define PCI_VENDOR_ID_TUNDRA 0x10e3 -+#define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000 -+ -+#define PCI_VENDOR_ID_AMCC 0x10e8 -+#define PCI_DEVICE_ID_AMCC_MYRINET 0x8043 -+#define PCI_DEVICE_ID_AMCC_PARASTATION 0x8062 -+#define PCI_DEVICE_ID_AMCC_S5933 0x807d -+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3 0x809c -+ -+#define PCI_VENDOR_ID_INTERG 0x10ea -+#define PCI_DEVICE_ID_INTERG_1680 0x1680 -+#define PCI_DEVICE_ID_INTERG_1682 0x1682 -+#define PCI_DEVICE_ID_INTERG_2000 0x2000 -+#define PCI_DEVICE_ID_INTERG_2010 0x2010 -+#define PCI_DEVICE_ID_INTERG_5000 0x5000 -+#define PCI_DEVICE_ID_INTERG_5050 0x5050 -+ -+#define PCI_VENDOR_ID_REALTEK 0x10ec -+#define PCI_DEVICE_ID_REALTEK_8029 0x8029 -+#define PCI_DEVICE_ID_REALTEK_8129 0x8129 -+#define PCI_DEVICE_ID_REALTEK_8139 0x8139 -+#define PCI_DEVICE_ID_REALTEK_8169 0x8169 -+ -+#define PCI_VENDOR_ID_XILINX 0x10ee -+#define PCI_DEVICE_ID_TURBOPAM 0x4020 -+ -+#define PCI_VENDOR_ID_TRUEVISION 0x10fa -+#define PCI_DEVICE_ID_TRUEVISION_T1000 0x000c -+ -+#define PCI_VENDOR_ID_INIT 0x1101 -+#define PCI_DEVICE_ID_INIT_320P 0x9100 -+#define PCI_DEVICE_ID_INIT_360P 0x9500 -+ -+#define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA -+#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 -+ -+#define PCI_VENDOR_ID_ECTIVA 0x1102 // duplicate: CREATIVE -+#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938 -+ -+#define PCI_VENDOR_ID_TTI 0x1103 -+#define PCI_DEVICE_ID_TTI_HPT343 0x0003 -+#define PCI_DEVICE_ID_TTI_HPT366 0x0004 -+#define PCI_DEVICE_ID_TTI_HPT372 0x0005 -+#define PCI_DEVICE_ID_TTI_HPT302 0x0006 -+#define PCI_DEVICE_ID_TTI_HPT371 0x0007 -+#define PCI_DEVICE_ID_TTI_HPT374 0x0008 -+#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 // apparently a 372N variant? -+ -+#define PCI_VENDOR_ID_VIA 0x1106 -+#define PCI_DEVICE_ID_VIA_8763_0 0x0198 -+#define PCI_DEVICE_ID_VIA_8380_0 0x0204 -+#define PCI_DEVICE_ID_VIA_3238_0 0x0238 -+#define PCI_DEVICE_ID_VIA_PT880 0x0258 -+#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259 -+#define PCI_DEVICE_ID_VIA_3269_0 0x0269 -+#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282 -+#define PCI_DEVICE_ID_VIA_8363_0 0x0305 -+#define PCI_DEVICE_ID_VIA_8371_0 0x0391 -+#define PCI_DEVICE_ID_VIA_8501_0 0x0501 -+#define PCI_DEVICE_ID_VIA_82C505 0x0505 -+#define PCI_DEVICE_ID_VIA_82C561 0x0561 -+#define PCI_DEVICE_ID_VIA_82C586_1 0x0571 -+#define PCI_DEVICE_ID_VIA_82C576 0x0576 -+#define PCI_DEVICE_ID_VIA_82C585 0x0585 -+#define PCI_DEVICE_ID_VIA_82C586_0 0x0586 -+#define PCI_DEVICE_ID_VIA_82C595 0x0595 -+#define PCI_DEVICE_ID_VIA_82C596 0x0596 -+#define PCI_DEVICE_ID_VIA_82C597_0 0x0597 -+#define PCI_DEVICE_ID_VIA_82C598_0 0x0598 -+#define PCI_DEVICE_ID_VIA_8601_0 0x0601 -+#define PCI_DEVICE_ID_VIA_8605_0 0x0605 -+#define PCI_DEVICE_ID_VIA_82C680 0x0680 -+#define PCI_DEVICE_ID_VIA_82C686 0x0686 -+#define PCI_DEVICE_ID_VIA_82C691_0 0x0691 -+#define PCI_DEVICE_ID_VIA_82C693 0x0693 -+#define PCI_DEVICE_ID_VIA_82C693_1 0x0698 -+#define PCI_DEVICE_ID_VIA_82C926 0x0926 -+#define PCI_DEVICE_ID_VIA_82C576_1 0x1571 -+#define PCI_DEVICE_ID_VIA_82C595_97 0x1595 -+#define PCI_DEVICE_ID_VIA_82C586_2 0x3038 -+#define PCI_DEVICE_ID_VIA_82C586_3 0x3040 -+#define PCI_DEVICE_ID_VIA_6305 0x3044 -+#define PCI_DEVICE_ID_VIA_82C596_3 0x3050 -+#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051 -+#define PCI_DEVICE_ID_VIA_82C686_4 0x3057 -+#define PCI_DEVICE_ID_VIA_82C686_5 0x3058 -+#define PCI_DEVICE_ID_VIA_8233_5 0x3059 -+#define PCI_DEVICE_ID_VIA_8233_7 0x3065 -+#define PCI_DEVICE_ID_VIA_82C686_6 0x3068 -+#define PCI_DEVICE_ID_VIA_8233_0 0x3074 -+#define PCI_DEVICE_ID_VIA_8633_0 0x3091 -+#define PCI_DEVICE_ID_VIA_8367_0 0x3099 -+#define PCI_DEVICE_ID_VIA_8653_0 0x3101 -+#define PCI_DEVICE_ID_VIA_8622 0x3102 -+#define PCI_DEVICE_ID_VIA_8233C_0 0x3109 -+#define PCI_DEVICE_ID_VIA_8361 0x3112 -+#define PCI_DEVICE_ID_VIA_XM266 0x3116 -+#define PCI_DEVICE_ID_VIA_612X 0x3119 -+#define PCI_DEVICE_ID_VIA_862X_0 0x3123 -+#define PCI_DEVICE_ID_VIA_8753_0 0x3128 -+#define PCI_DEVICE_ID_VIA_8233A 0x3147 -+#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148 -+#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149 -+#define PCI_DEVICE_ID_VIA_XN266 0x3156 -+#define PCI_DEVICE_ID_VIA_8754C_0 0x3168 -+#define PCI_DEVICE_ID_VIA_8235 0x3177 -+#define PCI_DEVICE_ID_VIA_P4N333 0x3178 -+#define PCI_DEVICE_ID_VIA_8385_0 0x3188 -+#define PCI_DEVICE_ID_VIA_8377_0 0x3189 -+#define PCI_DEVICE_ID_VIA_8378_0 0x3205 -+#define PCI_DEVICE_ID_VIA_8783_0 0x3208 -+#define PCI_DEVICE_ID_VIA_P4M400 0x3209 -+#define PCI_DEVICE_ID_VIA_8237 0x3227 -+#define PCI_DEVICE_ID_VIA_3296_0 0x0296 -+#define PCI_DEVICE_ID_VIA_86C100A 0x6100 -+#define PCI_DEVICE_ID_VIA_8231 0x8231 -+#define PCI_DEVICE_ID_VIA_8231_4 0x8235 -+#define PCI_DEVICE_ID_VIA_8365_1 0x8305 -+#define PCI_DEVICE_ID_VIA_8371_1 0x8391 -+#define PCI_DEVICE_ID_VIA_8501_1 0x8501 -+#define PCI_DEVICE_ID_VIA_82C597_1 0x8597 -+#define PCI_DEVICE_ID_VIA_82C598_1 0x8598 -+#define PCI_DEVICE_ID_VIA_8601_1 0x8601 -+#define PCI_DEVICE_ID_VIA_8505_1 0x8605 -+#define PCI_DEVICE_ID_VIA_8633_1 0xB091 -+#define PCI_DEVICE_ID_VIA_8367_1 0xB099 -+#define PCI_DEVICE_ID_VIA_P4X266_1 0xB101 -+#define PCI_DEVICE_ID_VIA_8615_1 0xB103 -+#define PCI_DEVICE_ID_VIA_8361_1 0xB112 -+#define PCI_DEVICE_ID_VIA_8235_1 0xB168 -+#define PCI_DEVICE_ID_VIA_838X_1 0xB188 -+#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 -+ -+#define PCI_VENDOR_ID_SIEMENS 0x110A -+#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 -+ -+#define PCI_VENDOR_ID_SMC2 0x1113 -+#define PCI_DEVICE_ID_SMC2_1211TX 0x1211 -+ -+#define PCI_VENDOR_ID_VORTEX 0x1119 -+#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000 -+#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001 -+#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002 -+#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003 -+#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004 -+#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005 -+#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006 -+#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007 -+#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008 -+#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009 -+#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a -+#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b -+#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c -+#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d -+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100 -+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101 -+#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102 -+#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103 -+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104 -+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105 -+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1 0x0110 -+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1 0x0111 -+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1 0x0112 -+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1 0x0113 -+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1 0x0114 -+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1 0x0115 -+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2 0x0120 -+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2 0x0121 -+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2 0x0122 -+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2 0x0123 -+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2 0x0124 -+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2 0x0125 -+ -+#define PCI_VENDOR_ID_EF 0x111a -+#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000 -+#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002 -+#define PCI_VENDOR_ID_EF_ATM_LANAI2 0x0003 -+#define PCI_VENDOR_ID_EF_ATM_LANAIHB 0x0005 -+ -+#define PCI_VENDOR_ID_IDT 0x111d -+#define PCI_DEVICE_ID_IDT_IDT77201 0x0001 -+ -+#define PCI_VENDOR_ID_FORE 0x1127 -+#define PCI_DEVICE_ID_FORE_PCA200PC 0x0210 -+#define PCI_DEVICE_ID_FORE_PCA200E 0x0300 -+ -+#define PCI_VENDOR_ID_IMAGINGTECH 0x112f -+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI 0x0000 -+ -+#define PCI_VENDOR_ID_PHILIPS 0x1131 -+#define PCI_DEVICE_ID_PHILIPS_SAA7145 0x7145 -+#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146 -+#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730 -+ -+#define PCI_VENDOR_ID_EICON 0x1133 -+#define PCI_DEVICE_ID_EICON_DIVA20PRO 0xe001 -+#define PCI_DEVICE_ID_EICON_DIVA20 0xe002 -+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U 0xe003 -+#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004 -+#define PCI_DEVICE_ID_EICON_DIVA201 0xe005 -+#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b -+#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010 -+#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012 -+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013 -+#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014 -+ -+#define PCI_VENDOR_ID_ZIATECH 0x1138 -+#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550 -+ -+#define PCI_VENDOR_ID_CYCLONE 0x113c -+#define PCI_DEVICE_ID_CYCLONE_SDK 0x0001 -+ -+#define PCI_VENDOR_ID_ALLIANCE 0x1142 -+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO 0x3210 -+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO 0x6422 -+#define PCI_DEVICE_ID_ALLIANCE_AT24 0x6424 -+#define PCI_DEVICE_ID_ALLIANCE_AT3D 0x643d -+ -+#define PCI_VENDOR_ID_SYSKONNECT 0x1148 -+#define PCI_DEVICE_ID_SYSKONNECT_FP 0x4000 -+#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200 -+#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300 -+#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320 -+#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400 -+#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500 -+ -+#define PCI_VENDOR_ID_VMIC 0x114a -+#define PCI_DEVICE_ID_VMIC_VME 0x7587 -+ -+#define PCI_VENDOR_ID_DIGI 0x114f -+#define PCI_DEVICE_ID_DIGI_EPC 0x0002 -+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH 0x0003 -+#define PCI_DEVICE_ID_DIGI_XEM 0x0004 -+#define PCI_DEVICE_ID_DIGI_XR 0x0005 -+#define PCI_DEVICE_ID_DIGI_CX 0x0006 -+#define PCI_DEVICE_ID_DIGI_XRJ 0x0009 -+#define PCI_DEVICE_ID_DIGI_EPCJ 0x000a -+#define PCI_DEVICE_ID_DIGI_XR_920 0x0027 -+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070 -+#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071 -+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072 -+#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073 -+#define PCI_DEVICE_ID_NEO_2DB9 0x00C8 -+#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9 -+#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA -+#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB -+ -+#define PCI_VENDOR_ID_MUTECH 0x1159 -+#define PCI_DEVICE_ID_MUTECH_MV1000 0x0001 -+ -+#define PCI_VENDOR_ID_XIRCOM 0x115d -+#define PCI_DEVICE_ID_XIRCOM_X3201_ETH 0x0003 -+#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101 -+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103 -+ -+#define PCI_VENDOR_ID_RENDITION 0x1163 -+#define PCI_DEVICE_ID_RENDITION_VERITE 0x0001 -+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000 -+ -+#define PCI_VENDOR_ID_SERVERWORKS 0x1166 -+#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 -+#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 -+#define PCI_DEVICE_ID_SERVERWORKS_CIOB30 0x0010 -+#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011 -+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 -+#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203 -+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 -+#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB -+#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221 -+#define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225 -+#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227 -+#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230 -+ -+#define PCI_VENDOR_ID_SBE 0x1176 -+#define PCI_DEVICE_ID_SBE_WANXL100 0x0301 -+#define PCI_DEVICE_ID_SBE_WANXL200 0x0302 -+#define PCI_DEVICE_ID_SBE_WANXL400 0x0104 -+ -+#define PCI_VENDOR_ID_TOSHIBA 0x1179 -+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102 -+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103 -+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105 -+#define PCI_DEVICE_ID_TOSHIBA_601 0x0601 -+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a -+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603 -+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a -+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f -+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617 -+ -+#define PCI_VENDOR_ID_TOSHIBA_2 0x102f -+#define PCI_DEVICE_ID_TOSHIBA_TX3927 0x000a -+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 -+#define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180 -+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 -+ -+#define PCI_VENDOR_ID_RICOH 0x1180 -+#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465 -+#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466 -+#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475 -+#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 -+#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 -+ -+#define PCI_VENDOR_ID_DLINK 0x1186 -+#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00 -+ -+#define PCI_VENDOR_ID_ARTOP 0x1191 -+#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004 -+#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005 -+#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006 -+#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007 -+#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008 -+#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009 -+#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002 -+#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010 -+#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020 -+#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030 -+#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040 -+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050 -+#define PCI_DEVICE_ID_ARTOP_8060 0x8060 -+#define PCI_DEVICE_ID_ARTOP_AEC67160 0x8080 -+#define PCI_DEVICE_ID_ARTOP_AEC67160_2 0x8081 -+#define PCI_DEVICE_ID_ARTOP_AEC67162 0x808a -+ -+#define PCI_VENDOR_ID_ZEITNET 0x1193 -+#define PCI_DEVICE_ID_ZEITNET_1221 0x0001 -+#define PCI_DEVICE_ID_ZEITNET_1225 0x0002 -+ -+#define PCI_VENDOR_ID_OMEGA 0x119b -+#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221 -+ -+#define PCI_VENDOR_ID_FUJITSU_ME 0x119e -+#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001 -+#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003 -+ -+#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9 -+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 -+ -+#define PCI_VENDOR_ID_MARVELL 0x11ab -+#define PCI_DEVICE_ID_MARVELL_GT64011 0x4146 -+#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 -+#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 -+#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 -+#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 -+#define PCI_DEVICE_ID_MARVELL_GT96100 0x9652 -+#define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653 -+ -+#define PCI_VENDOR_ID_LITEON 0x11ad -+#define PCI_DEVICE_ID_LITEON_LNE100TX 0x0002 -+ -+#define PCI_VENDOR_ID_V3 0x11b0 -+#define PCI_DEVICE_ID_V3_V960 0x0001 -+#define PCI_DEVICE_ID_V3_V350 0x0001 -+#define PCI_DEVICE_ID_V3_V961 0x0002 -+#define PCI_DEVICE_ID_V3_V351 0x0002 -+ -+#define PCI_VENDOR_ID_NP 0x11bc -+#define PCI_DEVICE_ID_NP_PCI_FDDI 0x0001 -+ -+#define PCI_VENDOR_ID_ATT 0x11c1 -+#define PCI_DEVICE_ID_ATT_L56XMF 0x0440 -+#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480 -+ -+#define PCI_VENDOR_ID_NEC2 0x11c3 /* NEC (2nd) */ -+ -+#define PCI_VENDOR_ID_SPECIALIX 0x11cb -+#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000 -+#define PCI_DEVICE_ID_SPECIALIX_XIO 0x4000 -+#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000 -+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004 -+ -+#define PCI_VENDOR_ID_AURAVISION 0x11d1 -+#define PCI_DEVICE_ID_AURAVISION_VXP524 0x01f7 -+ -+#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4 -+#define PCI_DEVICE_ID_AD1889JS 0x1889 -+ -+#define PCI_VENDOR_ID_IKON 0x11d5 -+#define PCI_DEVICE_ID_IKON_10115 0x0115 -+#define PCI_DEVICE_ID_IKON_10117 0x0117 -+ -+#define PCI_VENDOR_ID_SEGA 0x11db -+#define PCI_DEVICE_ID_SEGA_BBA 0x1234 -+ -+#define PCI_VENDOR_ID_ZORAN 0x11de -+#define PCI_DEVICE_ID_ZORAN_36057 0x6057 -+#define PCI_DEVICE_ID_ZORAN_36120 0x6120 -+ -+#define PCI_VENDOR_ID_KINETIC 0x11f4 -+#define PCI_DEVICE_ID_KINETIC_2915 0x2915 -+ -+#define PCI_VENDOR_ID_COMPEX 0x11f6 -+#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112 -+#define PCI_DEVICE_ID_COMPEX_RL2000 0x1401 -+ -+#define PCI_VENDOR_ID_RP 0x11fe -+#define PCI_DEVICE_ID_RP32INTF 0x0001 -+#define PCI_DEVICE_ID_RP8INTF 0x0002 -+#define PCI_DEVICE_ID_RP16INTF 0x0003 -+#define PCI_DEVICE_ID_RP4QUAD 0x0004 -+#define PCI_DEVICE_ID_RP8OCTA 0x0005 -+#define PCI_DEVICE_ID_RP8J 0x0006 -+#define PCI_DEVICE_ID_RP4J 0x0007 -+#define PCI_DEVICE_ID_RP8SNI 0x0008 -+#define PCI_DEVICE_ID_RP16SNI 0x0009 -+#define PCI_DEVICE_ID_RPP4 0x000A -+#define PCI_DEVICE_ID_RPP8 0x000B -+#define PCI_DEVICE_ID_RP8M 0x000C -+#define PCI_DEVICE_ID_RP4M 0x000D -+#define PCI_DEVICE_ID_RP2_232 0x000E -+#define PCI_DEVICE_ID_RP2_422 0x000F -+#define PCI_DEVICE_ID_URP32INTF 0x0801 -+#define PCI_DEVICE_ID_URP8INTF 0x0802 -+#define PCI_DEVICE_ID_URP16INTF 0x0803 -+#define PCI_DEVICE_ID_URP8OCTA 0x0805 -+#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C -+#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D -+#define PCI_DEVICE_ID_CRP16INTF 0x0903 -+ -+#define PCI_VENDOR_ID_CYCLADES 0x120e -+#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100 -+#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101 -+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102 -+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103 -+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104 -+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105 -+#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200 -+#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201 -+#define PCI_DEVICE_ID_PC300_RX_2 0x0300 -+#define PCI_DEVICE_ID_PC300_RX_1 0x0301 -+#define PCI_DEVICE_ID_PC300_TE_2 0x0310 -+#define PCI_DEVICE_ID_PC300_TE_1 0x0311 -+#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320 -+#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321 -+ -+/* Allied Telesyn */ -+#define PCI_VENDOR_ID_AT 0x1259 -+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 -+ -+#define PCI_VENDOR_ID_ESSENTIAL 0x120f -+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001 -+ -+#define PCI_VENDOR_ID_O2 0x1217 -+#define PCI_DEVICE_ID_O2_6729 0x6729 -+#define PCI_DEVICE_ID_O2_6730 0x673a -+#define PCI_DEVICE_ID_O2_6832 0x6832 -+#define PCI_DEVICE_ID_O2_6836 0x6836 -+ -+#define PCI_VENDOR_ID_3DFX 0x121a -+#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001 -+#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002 -+#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003 -+#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005 -+#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009 -+ -+#define PCI_VENDOR_ID_SIGMADES 0x1236 -+#define PCI_DEVICE_ID_SIGMADES_6425 0x6401 -+ -+#define PCI_VENDOR_ID_CCUBE 0x123f -+ -+#define PCI_VENDOR_ID_AVM 0x1244 -+#define PCI_DEVICE_ID_AVM_B1 0x0700 -+#define PCI_DEVICE_ID_AVM_C4 0x0800 -+#define PCI_DEVICE_ID_AVM_A1 0x0a00 -+#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00 -+#define PCI_DEVICE_ID_AVM_C2 0x1100 -+#define PCI_DEVICE_ID_AVM_T1 0x1200 -+ -+#define PCI_VENDOR_ID_DIPIX 0x1246 -+ -+#define PCI_VENDOR_ID_STALLION 0x124d -+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000 -+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002 -+#define PCI_DEVICE_ID_STALLION_EIOPCI 0x0003 -+ -+#define PCI_VENDOR_ID_OPTIBASE 0x1255 -+#define PCI_DEVICE_ID_OPTIBASE_FORGE 0x1110 -+#define PCI_DEVICE_ID_OPTIBASE_FUSION 0x1210 -+#define PCI_DEVICE_ID_OPTIBASE_VPLEX 0x2110 -+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120 -+#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130 -+ -+/* Allied Telesyn */ -+#define PCI_VENDOR_ID_AT 0x1259 -+#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701 -+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 -+ -+#define PCI_VENDOR_ID_ESS 0x125d -+#define PCI_DEVICE_ID_ESS_ESS1968 0x1968 -+#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969 -+#define PCI_DEVICE_ID_ESS_ESS1978 0x1978 -+ -+#define PCI_VENDOR_ID_SATSAGEM 0x1267 -+#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016 -+#define PCI_DEVICE_ID_SATSAGEM_PCR2101 0x5352 -+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b -+ -+#define PCI_VENDOR_ID_HUGHES 0x1273 -+#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002 -+ -+#define PCI_VENDOR_ID_ENSONIQ 0x1274 -+#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880 -+#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000 -+#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371 -+ -+#define PCI_VENDOR_ID_TRANSMETA 0x1279 -+#define PCI_DEVICE_ID_EFFICEON 0x0060 -+ -+#define PCI_VENDOR_ID_ROCKWELL 0x127A -+ -+#define PCI_VENDOR_ID_ITE 0x1283 -+#define PCI_DEVICE_ID_ITE_IT8172G 0x8172 -+#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801 -+#define PCI_DEVICE_ID_ITE_8872 0x8872 -+#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 -+ -+/* formerly Platform Tech */ -+#define PCI_VENDOR_ID_ESS_OLD 0x1285 -+#define PCI_DEVICE_ID_ESS_ESS0100 0x0100 -+ -+#define PCI_VENDOR_ID_ALTEON 0x12ae -+#define PCI_DEVICE_ID_ALTEON_ACENIC 0x0001 -+ -+#define PCI_VENDOR_ID_USR 0x12B9 -+ -+#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009 -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A -+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B -+ -+#define PCI_VENDOR_ID_PICTUREL 0x12c5 -+#define PCI_DEVICE_ID_PICTUREL_PCIVST 0x0081 -+ -+#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2 -+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018 -+ -+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0 -+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031 -+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021 -+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011 -+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041 -+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D -+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001 -+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010 -+ -+#define PCI_VENDOR_ID_AUREAL 0x12eb -+#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001 -+#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002 -+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003 -+ -+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8 -+#define PCI_DEVICE_ID_LML_33R10 0x8a02 -+ -+#define PCI_VENDOR_ID_CBOARDS 0x1307 -+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001 -+ -+#define PCI_VENDOR_ID_SIIG 0x131f -+#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 -+#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001 -+#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002 -+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010 -+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011 -+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012 -+#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020 -+#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021 -+#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030 -+#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031 -+#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032 -+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034 -+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035 -+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036 -+#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050 -+#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051 -+#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052 -+#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000 -+#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001 -+#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002 -+#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020 -+#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021 -+#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030 -+#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031 -+#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032 -+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040 -+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041 -+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042 -+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010 -+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011 -+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012 -+#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050 -+#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051 -+#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052 -+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060 -+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061 -+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 -+ -+#define PCI_VENDOR_ID_RADISYS 0x1331 -+#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030 -+ -+#define PCI_VENDOR_ID_DOMEX 0x134a -+#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 -+ -+#define PCI_VENDOR_ID_QUATECH 0x135C -+#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 -+#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 -+#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030 -+#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040 -+#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 -+#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 -+ -+#define PCI_VENDOR_ID_SEALEVEL 0x135e -+#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101 -+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201 -+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402 -+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202 -+#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401 -+#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801 -+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804 -+ -+#define PCI_VENDOR_ID_HYPERCOPE 0x1365 -+#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050 -+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104 -+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106 -+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107 -+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108 -+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS 0x0109 -+ -+#define PCI_VENDOR_ID_KAWASAKI 0x136b -+#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01 -+ -+#define PCI_VENDOR_ID_CNET 0x1371 -+#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e -+ -+#define PCI_VENDOR_ID_LMC 0x1376 -+#define PCI_DEVICE_ID_LMC_HSSI 0x0003 -+#define PCI_DEVICE_ID_LMC_DS3 0x0004 -+#define PCI_DEVICE_ID_LMC_SSI 0x0005 -+#define PCI_DEVICE_ID_LMC_T1 0x0006 -+ -+#define PCI_VENDOR_ID_NETGEAR 0x1385 -+#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a -+#define PCI_DEVICE_ID_NETGEAR_GA622 0x622a -+ -+#define PCI_VENDOR_ID_APPLICOM 0x1389 -+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 -+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 -+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 -+ -+#define PCI_VENDOR_ID_MOXA 0x1393 -+#define PCI_DEVICE_ID_MOXA_RC7000 0x0001 -+#define PCI_DEVICE_ID_MOXA_CP102 0x1020 -+#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021 -+#define PCI_DEVICE_ID_MOXA_CP102U 0x1022 -+#define PCI_DEVICE_ID_MOXA_C104 0x1040 -+#define PCI_DEVICE_ID_MOXA_CP104U 0x1041 -+#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042 -+#define PCI_DEVICE_ID_MOXA_CT114 0x1140 -+#define PCI_DEVICE_ID_MOXA_CP114 0x1141 -+#define PCI_DEVICE_ID_MOXA_CP118U 0x1180 -+#define PCI_DEVICE_ID_MOXA_CP132 0x1320 -+#define PCI_DEVICE_ID_MOXA_CP132U 0x1321 -+#define PCI_DEVICE_ID_MOXA_CP134U 0x1340 -+#define PCI_DEVICE_ID_MOXA_C168 0x1680 -+#define PCI_DEVICE_ID_MOXA_CP168U 0x1681 -+#define PCI_DEVICE_ID_MOXA_CP204J 0x2040 -+#define PCI_DEVICE_ID_MOXA_C218 0x2180 -+#define PCI_DEVICE_ID_MOXA_C320 0x3200 -+ -+#define PCI_VENDOR_ID_CCD 0x1397 -+#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 -+#define PCI_DEVICE_ID_CCD_B000 0xb000 -+#define PCI_DEVICE_ID_CCD_B006 0xb006 -+#define PCI_DEVICE_ID_CCD_B007 0xb007 -+#define PCI_DEVICE_ID_CCD_B008 0xb008 -+#define PCI_DEVICE_ID_CCD_B009 0xb009 -+#define PCI_DEVICE_ID_CCD_B00A 0xb00a -+#define PCI_DEVICE_ID_CCD_B00B 0xb00b -+#define PCI_DEVICE_ID_CCD_B00C 0xb00c -+#define PCI_DEVICE_ID_CCD_B100 0xb100 -+ -+#define PCI_VENDOR_ID_EXAR 0x13a8 -+#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 -+#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 -+#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 -+ -+#define PCI_VENDOR_ID_MICROGATE 0x13c0 -+#define PCI_DEVICE_ID_MICROGATE_USC 0x0010 -+#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020 -+#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 -+#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210 -+ -+#define PCI_VENDOR_ID_3WARE 0x13C1 -+#define PCI_DEVICE_ID_3WARE_1000 0x1000 -+#define PCI_DEVICE_ID_3WARE_7000 0x1001 -+#define PCI_DEVICE_ID_3WARE_9000 0x1002 -+ -+#define PCI_VENDOR_ID_IOMEGA 0x13ca -+#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231 -+ -+#define PCI_VENDOR_ID_ABOCOM 0x13D1 -+#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1 -+ -+#define PCI_VENDOR_ID_CMEDIA 0x13f6 -+#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100 -+#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101 -+#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111 -+#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112 -+ -+#define PCI_VENDOR_ID_LAVA 0x1407 -+#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ -+#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ -+#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ -+#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ -+#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ -+#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ -+#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */ -+#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */ -+#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */ -+#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */ -+#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000 -+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */ -+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */ -+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800 -+ -+#define PCI_VENDOR_ID_TIMEDIA 0x1409 -+#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168 -+ -+#define PCI_VENDOR_ID_OXSEMI 0x1415 -+#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403 -+#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501 -+#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511 -+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513 -+#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521 -+ -+#define PCI_VENDOR_ID_SAMSUNG 0x144d -+ -+#define PCI_VENDOR_ID_AIRONET 0x14b9 -+#define PCI_DEVICE_ID_AIRONET_4800_1 0x0001 -+#define PCI_DEVICE_ID_AIRONET_4800 0x4500 // values switched? see -+#define PCI_DEVICE_ID_AIRONET_4500 0x4800 // drivers/net/aironet4500_card.c -+ -+#define PCI_VENDOR_ID_TITAN 0x14D2 -+#define PCI_DEVICE_ID_TITAN_010L 0x8001 -+#define PCI_DEVICE_ID_TITAN_100L 0x8010 -+#define PCI_DEVICE_ID_TITAN_110L 0x8011 -+#define PCI_DEVICE_ID_TITAN_200L 0x8020 -+#define PCI_DEVICE_ID_TITAN_210L 0x8021 -+#define PCI_DEVICE_ID_TITAN_400L 0x8040 -+#define PCI_DEVICE_ID_TITAN_800L 0x8080 -+#define PCI_DEVICE_ID_TITAN_100 0xA001 -+#define PCI_DEVICE_ID_TITAN_200 0xA005 -+#define PCI_DEVICE_ID_TITAN_400 0xA003 -+#define PCI_DEVICE_ID_TITAN_800B 0xA004 -+ -+#define PCI_VENDOR_ID_PANACOM 0x14d4 -+#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400 -+#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402 -+ -+#define PCI_VENDOR_ID_SIPACKETS 0x14d9 -+#define PCI_DEVICE_ID_SP_HT 0x0010 -+ -+#define PCI_VENDOR_ID_AFAVLAB 0x14db -+#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180 -+#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 -+ -+#define PCI_VENDOR_ID_BROADCOM 0x14e4 -+#define PCI_DEVICE_ID_TIGON3_5752 0x1600 -+#define PCI_DEVICE_ID_TIGON3_5752M 0x1601 -+#define PCI_DEVICE_ID_TIGON3_5700 0x1644 -+#define PCI_DEVICE_ID_TIGON3_5701 0x1645 -+#define PCI_DEVICE_ID_TIGON3_5702 0x1646 -+#define PCI_DEVICE_ID_TIGON3_5703 0x1647 -+#define PCI_DEVICE_ID_TIGON3_5704 0x1648 -+#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649 -+#define PCI_DEVICE_ID_NX2_5706 0x164a -+#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d -+#define PCI_DEVICE_ID_TIGON3_5705 0x1653 -+#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 -+#define PCI_DEVICE_ID_TIGON3_5720 0x1658 -+#define PCI_DEVICE_ID_TIGON3_5721 0x1659 -+#define PCI_DEVICE_ID_TIGON3_5705M 0x165d -+#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e -+#define PCI_DEVICE_ID_TIGON3_5705F 0x166e -+#define PCI_DEVICE_ID_TIGON3_5750 0x1676 -+#define PCI_DEVICE_ID_TIGON3_5751 0x1677 -+#define PCI_DEVICE_ID_TIGON3_5750M 0x167c -+#define PCI_DEVICE_ID_TIGON3_5751M 0x167d -+#define PCI_DEVICE_ID_TIGON3_5751F 0x167e -+#define PCI_DEVICE_ID_TIGON3_5782 0x1696 -+#define PCI_DEVICE_ID_TIGON3_5788 0x169c -+#define PCI_DEVICE_ID_TIGON3_5789 0x169d -+#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6 -+#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7 -+#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 -+#define PCI_DEVICE_ID_NX2_5706S 0x16aa -+#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6 -+#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7 -+#define PCI_DEVICE_ID_TIGON3_5781 0x16dd -+#define PCI_DEVICE_ID_TIGON3_5753 0x16f7 -+#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd -+#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe -+#define PCI_DEVICE_ID_TIGON3_5901 0x170d -+#define PCI_DEVICE_ID_BCM4401B1 0x170c -+#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e -+#define PCI_DEVICE_ID_BCM4401 0x4401 -+#define PCI_DEVICE_ID_BCM4401B0 0x4402 -+ -+#define PCI_VENDOR_ID_TOPIC 0x151f -+#define PCI_DEVICE_ID_TOPIC_TP560 0x0000 -+ -+#define PCI_VENDOR_ID_ENE 0x1524 -+#define PCI_DEVICE_ID_ENE_1211 0x1211 -+#define PCI_DEVICE_ID_ENE_1225 0x1225 -+#define PCI_DEVICE_ID_ENE_1410 0x1410 -+#define PCI_DEVICE_ID_ENE_1420 0x1420 -+ -+#define PCI_VENDOR_ID_SYBA 0x1592 -+#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 -+#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783 -+ -+#define PCI_VENDOR_ID_MORETON 0x15aa -+#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000 -+ -+#define PCI_VENDOR_ID_ZOLTRIX 0x15b0 -+#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0 -+ -+#define PCI_VENDOR_ID_MELLANOX 0x15b3 -+#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44 -+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278 -+#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282 -+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c -+#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274 -+ -+#define PCI_VENDOR_ID_PDC 0x15e9 -+#define PCI_DEVICE_ID_PDC_1841 0x1841 -+ -+#define PCI_VENDOR_ID_MACROLINK 0x15ed -+#define PCI_DEVICE_ID_MACROLINK_MCCS8 0x1000 -+#define PCI_DEVICE_ID_MACROLINK_MCCS 0x1001 -+#define PCI_DEVICE_ID_MACROLINK_MCCS8H 0x1002 -+#define PCI_DEVICE_ID_MACROLINK_MCCSH 0x1003 -+#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000 -+#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001 -+ -+#define PCI_VENDOR_ID_FARSITE 0x1619 -+#define PCI_DEVICE_ID_FARSITE_T2P 0x0400 -+#define PCI_DEVICE_ID_FARSITE_T4P 0x0440 -+#define PCI_DEVICE_ID_FARSITE_T1U 0x0610 -+#define PCI_DEVICE_ID_FARSITE_T2U 0x0620 -+#define PCI_DEVICE_ID_FARSITE_T4U 0x0640 -+#define PCI_DEVICE_ID_FARSITE_TE1 0x1610 -+#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612 -+ -+#define PCI_VENDOR_ID_SIBYTE 0x166d -+#define PCI_DEVICE_ID_BCM1250_HT 0x0002 -+ -+#define PCI_VENDOR_ID_LINKSYS 0x1737 -+#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032 -+#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064 -+ -+#define PCI_VENDOR_ID_ALTIMA 0x173b -+#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8 -+#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9 -+#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea -+#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb -+ -+#define PCI_VENDOR_ID_S2IO 0x17d5 -+#define PCI_DEVICE_ID_S2IO_WIN 0x5731 -+#define PCI_DEVICE_ID_S2IO_UNI 0x5831 -+#define PCI_DEVICE_ID_HERC_WIN 0x5732 -+#define PCI_DEVICE_ID_HERC_UNI 0x5832 -+ -+#define PCI_VENDOR_ID_INFINICON 0x1820 -+ -+#define PCI_VENDOR_ID_TOPSPIN 0x1867 -+ -+#define PCI_VENDOR_ID_TDI 0x192E -+#define PCI_DEVICE_ID_TDI_EHCI 0x0101 -+ -+#define PCI_VENDOR_ID_SYMPHONY 0x1c1c -+#define PCI_DEVICE_ID_SYMPHONY_101 0x0001 -+ -+#define PCI_VENDOR_ID_TEKRAM 0x1de1 -+#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 -+ -+#define PCI_VENDOR_ID_HINT 0x3388 -+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013 -+ -+#define PCI_VENDOR_ID_3DLABS 0x3d3d -+#define PCI_DEVICE_ID_3DLABS_300SX 0x0001 -+#define PCI_DEVICE_ID_3DLABS_500TX 0x0002 -+#define PCI_DEVICE_ID_3DLABS_DELTA 0x0003 -+#define PCI_DEVICE_ID_3DLABS_PERMEDIA 0x0004 -+#define PCI_DEVICE_ID_3DLABS_MX 0x0006 -+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007 -+#define PCI_DEVICE_ID_3DLABS_GAMMA 0x0008 -+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009 -+ -+#define PCI_VENDOR_ID_AVANCE 0x4005 -+#define PCI_DEVICE_ID_AVANCE_ALG2064 0x2064 -+#define PCI_DEVICE_ID_AVANCE_2302 0x2302 -+ -+#define PCI_VENDOR_ID_AKS 0x416c -+#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100 -+#define PCI_DEVICE_ID_AKS_CPC 0x0200 -+ -+#define PCI_VENDOR_ID_REDCREEK 0x4916 -+#define PCI_DEVICE_ID_RC45 0x1960 -+ -+#define PCI_VENDOR_ID_NETVIN 0x4a14 -+#define PCI_DEVICE_ID_NETVIN_NV5000SC 0x5000 -+ -+#define PCI_VENDOR_ID_S3 0x5333 -+#define PCI_DEVICE_ID_S3_PLATO_PXS 0x0551 -+#define PCI_DEVICE_ID_S3_ViRGE 0x5631 -+#define PCI_DEVICE_ID_S3_TRIO 0x8811 -+#define PCI_DEVICE_ID_S3_AURORA64VP 0x8812 -+#define PCI_DEVICE_ID_S3_TRIO64UVP 0x8814 -+#define PCI_DEVICE_ID_S3_ViRGE_VX 0x883d -+#define PCI_DEVICE_ID_S3_868 0x8880 -+#define PCI_DEVICE_ID_S3_928 0x88b0 -+#define PCI_DEVICE_ID_S3_864_1 0x88c0 -+#define PCI_DEVICE_ID_S3_864_2 0x88c1 -+#define PCI_DEVICE_ID_S3_964_1 0x88d0 -+#define PCI_DEVICE_ID_S3_964_2 0x88d1 -+#define PCI_DEVICE_ID_S3_968 0x88f0 -+#define PCI_DEVICE_ID_S3_TRIO64V2 0x8901 -+#define PCI_DEVICE_ID_S3_PLATO_PXG 0x8902 -+#define PCI_DEVICE_ID_S3_ViRGE_DXGX 0x8a01 -+#define PCI_DEVICE_ID_S3_ViRGE_GX2 0x8a10 -+#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 -+#define PCI_DEVICE_ID_S3_ViRGE_MX 0x8c01 -+#define PCI_DEVICE_ID_S3_ViRGE_MXP 0x8c02 -+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV 0x8c03 -+#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 -+#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00 -+ -+#define PCI_VENDOR_ID_DUNORD 0x5544 -+#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 -+ -+#define PCI_VENDOR_ID_DCI 0x6666 -+#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001 -+#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002 -+ -+#define PCI_VENDOR_ID_DUNORD 0x5544 -+#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 -+ -+#define PCI_VENDOR_ID_GENROCO 0x5555 -+#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003 -+ -+#define PCI_VENDOR_ID_INTEL 0x8086 -+#define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -+#define PCI_DEVICE_ID_INTEL_21145 0x0039 -+#define PCI_DEVICE_ID_INTEL_82375 0x0482 -+#define PCI_DEVICE_ID_INTEL_82424 0x0483 -+#define PCI_DEVICE_ID_INTEL_82378 0x0484 -+#define PCI_DEVICE_ID_INTEL_82430 0x0486 -+#define PCI_DEVICE_ID_INTEL_82434 0x04a3 -+#define PCI_DEVICE_ID_INTEL_I960 0x0960 -+#define PCI_DEVICE_ID_INTEL_I960RM 0x0962 -+#define PCI_DEVICE_ID_INTEL_82562ET 0x1031 -+#define PCI_DEVICE_ID_INTEL_82801CAM 0x1038 -+#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130 -+#define PCI_DEVICE_ID_INTEL_82815_AB 0x1131 -+#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132 -+#define PCI_DEVICE_ID_INTEL_82559ER 0x1209 -+#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 -+#define PCI_DEVICE_ID_INTEL_82092AA_1 0x1222 -+#define PCI_DEVICE_ID_INTEL_7116 0x1223 -+#define PCI_DEVICE_ID_INTEL_7505_0 0x2550 -+#define PCI_DEVICE_ID_INTEL_7505_1 0x2552 -+#define PCI_DEVICE_ID_INTEL_7205_0 0x255d -+#define PCI_DEVICE_ID_INTEL_82596 0x1226 -+#define PCI_DEVICE_ID_INTEL_82865 0x1227 -+#define PCI_DEVICE_ID_INTEL_82557 0x1229 -+#define PCI_DEVICE_ID_INTEL_82437 0x122d -+#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e -+#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230 -+#define PCI_DEVICE_ID_INTEL_82371MX 0x1234 -+#define PCI_DEVICE_ID_INTEL_82437MX 0x1235 -+#define PCI_DEVICE_ID_INTEL_82441 0x1237 -+#define PCI_DEVICE_ID_INTEL_82380FB 0x124b -+#define PCI_DEVICE_ID_INTEL_82439 0x1250 -+#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960 -+#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 -+#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 -+#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 -+#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 -+#define PCI_DEVICE_ID_INTEL_82801AA_2 0x2412 -+#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 -+#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415 -+#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416 -+#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418 -+#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420 -+#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421 -+#define PCI_DEVICE_ID_INTEL_82801AB_2 0x2422 -+#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423 -+#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425 -+#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426 -+#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428 -+#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440 -+#define PCI_DEVICE_ID_INTEL_82801BA_1 0x2442 -+#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443 -+#define PCI_DEVICE_ID_INTEL_82801BA_3 0x2444 -+#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445 -+#define PCI_DEVICE_ID_INTEL_82801BA_5 0x2446 -+#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448 -+#define PCI_DEVICE_ID_INTEL_82801BA_7 0x2449 -+#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a -+#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b -+#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c -+#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e -+#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450 -+#define PCI_DEVICE_ID_INTEL_82801E_2 0x2452 -+#define PCI_DEVICE_ID_INTEL_82801E_3 0x2453 -+#define PCI_DEVICE_ID_INTEL_82801E_9 0x2459 -+#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b -+#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d -+#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e -+#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480 -+#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482 -+#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483 -+#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484 -+#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485 -+#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486 -+#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487 -+#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a -+#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b -+#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c -+#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0 -+#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1 -+#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2 -+#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3 -+#define PCI_DEVICE_ID_INTEL_82801DB_4 0x24c4 -+#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5 -+#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6 -+#define PCI_DEVICE_ID_INTEL_82801DB_7 0x24c7 -+#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9 -+#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca -+#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb -+#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc -+#define PCI_DEVICE_ID_INTEL_82801DB_13 0x24cd -+#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0 -+#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1 -+#define PCI_DEVICE_ID_INTEL_82801EB_2 0x24d2 -+#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3 -+#define PCI_DEVICE_ID_INTEL_82801EB_4 0x24d4 -+#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5 -+#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6 -+#define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7 -+#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db -+#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd -+#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1 -+#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2 -+#define PCI_DEVICE_ID_INTEL_ESB_3 0x25a3 -+#define PCI_DEVICE_ID_INTEL_ESB_31 0x25b0 -+#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4 -+#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6 -+#define PCI_DEVICE_ID_INTEL_ESB_6 0x25a7 -+#define PCI_DEVICE_ID_INTEL_ESB_7 0x25a9 -+#define PCI_DEVICE_ID_INTEL_ESB_8 0x25aa -+#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab -+#define PCI_DEVICE_ID_INTEL_ESB_11 0x25ac -+#define PCI_DEVICE_ID_INTEL_ESB_12 0x25ad -+#define PCI_DEVICE_ID_INTEL_ESB_13 0x25ae -+#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500 -+#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501 -+#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530 -+#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531 -+#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560 -+#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562 -+#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570 -+#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572 -+#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578 -+#define PCI_DEVICE_ID_INTEL_82875_IG 0x257b -+#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580 -+#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 -+#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 -+#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592 -+#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770 -+#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772 -+#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 -+#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 -+#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 -+#define PCI_DEVICE_ID_INTEL_ICH6_3 0x2651 -+#define PCI_DEVICE_ID_INTEL_ICH6_4 0x2652 -+#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653 -+#define PCI_DEVICE_ID_INTEL_ICH6_6 0x2658 -+#define PCI_DEVICE_ID_INTEL_ICH6_7 0x2659 -+#define PCI_DEVICE_ID_INTEL_ICH6_8 0x265a -+#define PCI_DEVICE_ID_INTEL_ICH6_9 0x265b -+#define PCI_DEVICE_ID_INTEL_ICH6_10 0x265c -+#define PCI_DEVICE_ID_INTEL_ICH6_11 0x2660 -+#define PCI_DEVICE_ID_INTEL_ICH6_12 0x2662 -+#define PCI_DEVICE_ID_INTEL_ICH6_13 0x2664 -+#define PCI_DEVICE_ID_INTEL_ICH6_14 0x2666 -+#define PCI_DEVICE_ID_INTEL_ICH6_15 0x2668 -+#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a -+#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d -+#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e -+#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f -+#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670 -+#define PCI_DEVICE_ID_INTEL_ESB2_1 0x2680 -+#define PCI_DEVICE_ID_INTEL_ESB2_2 0x2681 -+#define PCI_DEVICE_ID_INTEL_ESB2_3 0x2682 -+#define PCI_DEVICE_ID_INTEL_ESB2_4 0x2683 -+#define PCI_DEVICE_ID_INTEL_ESB2_5 0x2688 -+#define PCI_DEVICE_ID_INTEL_ESB2_6 0x2689 -+#define PCI_DEVICE_ID_INTEL_ESB2_7 0x268a -+#define PCI_DEVICE_ID_INTEL_ESB2_8 0x268b -+#define PCI_DEVICE_ID_INTEL_ESB2_9 0x268c -+#define PCI_DEVICE_ID_INTEL_ESB2_10 0x2690 -+#define PCI_DEVICE_ID_INTEL_ESB2_11 0x2692 -+#define PCI_DEVICE_ID_INTEL_ESB2_12 0x2694 -+#define PCI_DEVICE_ID_INTEL_ESB2_13 0x2696 -+#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698 -+#define PCI_DEVICE_ID_INTEL_ESB2_15 0x2699 -+#define PCI_DEVICE_ID_INTEL_ESB2_16 0x269a -+#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b -+#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e -+#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 -+#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 -+#define PCI_DEVICE_ID_INTEL_ICH7_2 0x27c0 -+#define PCI_DEVICE_ID_INTEL_ICH7_3 0x27c1 -+#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 -+#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd -+#define PCI_DEVICE_ID_INTEL_ICH7_5 0x27c4 -+#define PCI_DEVICE_ID_INTEL_ICH7_6 0x27c5 -+#define PCI_DEVICE_ID_INTEL_ICH7_7 0x27c8 -+#define PCI_DEVICE_ID_INTEL_ICH7_8 0x27c9 -+#define PCI_DEVICE_ID_INTEL_ICH7_9 0x27ca -+#define PCI_DEVICE_ID_INTEL_ICH7_10 0x27cb -+#define PCI_DEVICE_ID_INTEL_ICH7_11 0x27cc -+#define PCI_DEVICE_ID_INTEL_ICH7_12 0x27d0 -+#define PCI_DEVICE_ID_INTEL_ICH7_13 0x27d2 -+#define PCI_DEVICE_ID_INTEL_ICH7_14 0x27d4 -+#define PCI_DEVICE_ID_INTEL_ICH7_15 0x27d6 -+#define PCI_DEVICE_ID_INTEL_ICH7_16 0x27d8 -+#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da -+#define PCI_DEVICE_ID_INTEL_ICH7_18 0x27dc -+#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd -+#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de -+#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df -+#define PCI_DEVICE_ID_INTEL_ICH7_22 0x27e0 -+#define PCI_DEVICE_ID_INTEL_ICH7_23 0x27e2 -+#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 -+#define PCI_DEVICE_ID_INTEL_ESB2_19 0x3500 -+#define PCI_DEVICE_ID_INTEL_ESB2_20 0x3501 -+#define PCI_DEVICE_ID_INTEL_ESB2_21 0x3504 -+#define PCI_DEVICE_ID_INTEL_ESB2_22 0x3505 -+#define PCI_DEVICE_ID_INTEL_ESB2_23 0x350c -+#define PCI_DEVICE_ID_INTEL_ESB2_24 0x350d -+#define PCI_DEVICE_ID_INTEL_ESB2_25 0x3510 -+#define PCI_DEVICE_ID_INTEL_ESB2_26 0x3511 -+#define PCI_DEVICE_ID_INTEL_ESB2_27 0x3514 -+#define PCI_DEVICE_ID_INTEL_ESB2_28 0x3515 -+#define PCI_DEVICE_ID_INTEL_ESB2_29 0x3518 -+#define PCI_DEVICE_ID_INTEL_ESB2_30 0x3519 -+#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 -+#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 -+#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 -+#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 -+#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 -+#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592 -+#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595 -+#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596 -+#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597 -+#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598 -+#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599 -+#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a -+#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e -+#define PCI_DEVICE_ID_INTEL_80310 0x530d -+#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 -+#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 -+#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020 -+#define PCI_DEVICE_ID_INTEL_82437VX 0x7030 -+#define PCI_DEVICE_ID_INTEL_82439TX 0x7100 -+#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110 -+#define PCI_DEVICE_ID_INTEL_82371AB 0x7111 -+#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112 -+#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113 -+#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120 -+#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121 -+#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122 -+#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123 -+#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124 -+#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125 -+#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180 -+#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181 -+#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190 -+#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191 -+#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192 -+#define PCI_DEVICE_ID_INTEL_440MX 0x7195 -+#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198 -+#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199 -+#define PCI_DEVICE_ID_INTEL_82443MX_2 0x719a -+#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b -+#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0 -+#define PCI_DEVICE_ID_INTEL_82443GX_1 0x71a1 -+#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2 -+#define PCI_DEVICE_ID_INTEL_82372FB_0 0x7600 -+#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 -+#define PCI_DEVICE_ID_INTEL_82372FB_2 0x7602 -+#define PCI_DEVICE_ID_INTEL_82372FB_3 0x7603 -+#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 -+#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 -+#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca -+#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb -+#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea -+#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500 -+#define PCI_DEVICE_ID_INTEL_IXP2400 0x9001 -+#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004 -+#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152 -+ -+#define PCI_VENDOR_ID_COMPUTONE 0x8e0e -+#define PCI_DEVICE_ID_COMPUTONE_IP2EX 0x0291 -+#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302 -+#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e -+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001 -+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002 -+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003 -+ -+#define PCI_VENDOR_ID_KTI 0x8e2e -+#define PCI_DEVICE_ID_KTI_ET32P2 0x3000 -+ -+#define PCI_VENDOR_ID_ADAPTEC 0x9004 -+#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078 -+#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178 -+#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860 -+#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078 -+#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578 -+#define PCI_DEVICE_ID_ADAPTEC_5800 0x5800 -+#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038 -+#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075 -+#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078 -+#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178 -+#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078 -+#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178 -+#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278 -+#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378 -+#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478 -+#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895 -+#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078 -+#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178 -+#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278 -+#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378 -+#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478 -+#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578 -+#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678 -+#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778 -+#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878 -+#define PCI_DEVICE_ID_ADAPTEC_1030 0x8b78 -+ -+#define PCI_VENDOR_ID_ADAPTEC2 0x9005 -+#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010 -+#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011 -+#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013 -+#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f -+#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050 -+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051 -+#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f -+#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080 -+#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081 -+#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083 -+#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f -+#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0 -+#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1 -+#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3 -+#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf -+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503 -+ -+#define PCI_VENDOR_ID_ATRONICS 0x907f -+#define PCI_DEVICE_ID_ATRONICS_2015 0x2015 -+ -+#define PCI_VENDOR_ID_HOLTEK 0x9412 -+#define PCI_DEVICE_ID_HOLTEK_6565 0x6565 -+ -+#define PCI_VENDOR_ID_NETMOS 0x9710 -+#define PCI_DEVICE_ID_NETMOS_9705 0x9705 -+#define PCI_DEVICE_ID_NETMOS_9715 0x9715 -+#define PCI_DEVICE_ID_NETMOS_9735 0x9735 -+#define PCI_DEVICE_ID_NETMOS_9745 0x9745 -+#define PCI_DEVICE_ID_NETMOS_9755 0x9755 -+#define PCI_DEVICE_ID_NETMOS_9805 0x9805 -+#define PCI_DEVICE_ID_NETMOS_9815 0x9815 -+#define PCI_DEVICE_ID_NETMOS_9835 0x9835 -+#define PCI_DEVICE_ID_NETMOS_9845 0x9845 -+#define PCI_DEVICE_ID_NETMOS_9855 0x9855 -+ -+#define PCI_SUBVENDOR_ID_EXSYS 0xd84d -+#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 -+ -+#define PCI_VENDOR_ID_TIGERJET 0xe159 -+#define PCI_DEVICE_ID_TIGERJET_300 0x0001 -+#define PCI_DEVICE_ID_TIGERJET_100 0x0002 -+ -+#define PCI_VENDOR_ID_TTTECH 0x0357 -+#define PCI_DEVICE_ID_TTTECH_MC322 0x000A -+ -+#define PCI_VENDOR_ID_ARK 0xedd8 -+#define PCI_DEVICE_ID_ARK_STING 0xa091 -+#define PCI_DEVICE_ID_ARK_STINGARK 0xa099 -+#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1