X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/8d65dcfe1719aee649ca3f029baa49598c0b0e1f..6262f561d3cbc0d63a39ba8e059ffd38cae20a8e:/target/linux/at91/patches-2.6.25/003-gpio-driver.patch diff --git a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch b/target/linux/at91/patches-2.6.25/003-gpio-driver.patch index e81c771c0..3968c6b2d 100644 --- a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch +++ b/target/linux/at91/patches-2.6.25/003-gpio-driver.patch @@ -1,7 +1,6 @@ -diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c ---- linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c 2008-07-07 11:20:21.000000000 +0200 -+++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c 2008-07-07 12:11:40.000000000 +0200 -@@ -99,7 +99,7 @@ +--- a/arch/arm/mach-at91/board-vlink.c ++++ b/arch/arm/mach-at91/board-vlink.c +@@ -99,7 +99,7 @@ static struct at91_udc_data __initdata v */ static struct at91_mmc_data __initdata vlink_mmc_data = { @@ -10,7 +9,7 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/a .slot_b = 0, .wire4 = 1, // .wp_pin = AT91_PIN_PA17, -@@ -136,6 +136,7 @@ +@@ -136,6 +136,7 @@ static struct spi_board_info vlink_spi_d static void __init vlink_board_init(void) { @@ -18,7 +17,7 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/a /* Serial */ at91_add_device_serial(); /* Ethernet */ -@@ -157,36 +158,66 @@ +@@ -157,36 +158,66 @@ static void __init vlink_board_init(void // at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &vlink_mmc_data); #endif @@ -103,9 +102,8 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/a } MACHINE_START(VLINK, "FDL VersaLink") -diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm/mach-at91/gpio.c ---- linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c 2008-07-07 11:20:21.000000000 +0200 -+++ linux-2.6.25.10/arch/arm/mach-at91/gpio.c 2008-07-07 11:42:33.000000000 +0200 +--- a/arch/arm/mach-at91/gpio.c ++++ b/arch/arm/mach-at91/gpio.c @@ -29,6 +29,7 @@ static struct at91_gpio_bank *gpio; @@ -114,7 +112,7 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm static inline void __iomem *pin_to_controller(unsigned pin) -@@ -71,9 +72,13 @@ +@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip { void __iomem *pio = pin_to_controller(pin); unsigned mask = pin_to_mask(pin); @@ -128,7 +126,7 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); __raw_writel(mask, pio + PIO_PER); -@@ -130,10 +135,13 @@ +@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input { void __iomem *pio = pin_to_controller(pin); unsigned mask = pin_to_mask(pin); @@ -142,7 +140,7 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); __raw_writel(mask, pio + PIO_ODR); -@@ -151,10 +159,13 @@ +@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu { void __iomem *pio = pin_to_controller(pin); unsigned mask = pin_to_mask(pin); @@ -156,7 +154,7 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + PIO_PUDR); __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); -@@ -262,6 +273,18 @@ +@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin) } EXPORT_SYMBOL(at91_get_gpio_value); @@ -175,10 +173,9 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm /*--------------------------------------------------------------------------*/ #ifdef CONFIG_PM -diff -urN linux-2.6.25.10.old/drivers/char/Kconfig linux-2.6.25.10/drivers/char/Kconfig ---- linux-2.6.25.10.old/drivers/char/Kconfig 2008-07-07 11:20:21.000000000 +0200 -+++ linux-2.6.25.10/drivers/char/Kconfig 2008-07-07 11:42:33.000000000 +0200 -@@ -1072,5 +1072,12 @@ +--- a/drivers/char/Kconfig ++++ b/drivers/char/Kconfig +@@ -1072,5 +1072,12 @@ config AT91_SPIDEV The SPI driver gives user mode access to this serial bus on the AT91RM9200 processor. @@ -191,10 +188,9 @@ diff -urN linux-2.6.25.10.old/drivers/char/Kconfig linux-2.6.25.10/drivers/char/ + endmenu -diff -urN linux-2.6.25.10.old/drivers/char/Makefile linux-2.6.25.10/drivers/char/Makefile ---- linux-2.6.25.10.old/drivers/char/Makefile 2008-07-07 11:20:21.000000000 +0200 -+++ linux-2.6.25.10/drivers/char/Makefile 2008-07-07 11:42:33.000000000 +0200 -@@ -100,6 +100,7 @@ +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -100,6 +100,7 @@ obj-$(CONFIG_GPIO_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o obj-$(CONFIG_AT91_SPI) += at91_spi.o obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o @@ -202,9 +198,8 @@ diff -urN linux-2.6.25.10.old/drivers/char/Makefile linux-2.6.25.10/drivers/char obj-$(CONFIG_MWAVE) += mwave/ obj-$(CONFIG_AGP) += agp/ -diff -urN linux-2.6.25.10.old/drivers/char/vlink_giu.c linux-2.6.25.10/drivers/char/vlink_giu.c ---- linux-2.6.25.10.old/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.25.10/drivers/char/vlink_giu.c 2008-07-07 13:41:51.000000000 +0200 +--- /dev/null ++++ b/drivers/char/vlink_giu.c @@ -0,0 +1,333 @@ +/* + * Driver for FDL Versalink GPIO @@ -539,10 +534,9 @@ diff -urN linux-2.6.25.10.old/drivers/char/vlink_giu.c linux-2.6.25.10/drivers/c + +MODULE_AUTHOR("Hamish Guthrie "); +MODULE_DESCRIPTION("FDL Versalink GPIO Driver"); -+MODULE_LICENSE("GPL"); ---- linux-2.6.25.10.old/include/asm-arm/arch-at91/gpio.h 2008-07-03 05:46:47.000000000 +0200 -+++ linux-2.6.25.10/include/asm-arm/arch-at91/gpio.h 2008-07-07 17:03:03.000000000 +0200 -@@ -199,6 +199,7 @@ +--- a/include/asm-arm/arch-at91/gpio.h ++++ b/include/asm-arm/arch-at91/gpio.h +@@ -199,6 +199,7 @@ extern int __init_or_module at91_set_mul /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); extern int at91_get_gpio_value(unsigned pin);