X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/a08030216f893563d069fe3f75818581d4a24f34..2c9faea8fbac8dc28e1acece40ed9722ccf5d34b:/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch diff --git a/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch b/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch index 45052961e..86d4d3517 100644 --- a/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch +++ b/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch @@ -1,414 +1,6 @@ -diff -urN linux.old/arch/mips/ar7/avalanche/avalanche_jump.S linux.dev/arch/mips/ar7/avalanche/avalanche_jump.S ---- linux.old/arch/mips/ar7/avalanche/avalanche_jump.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/avalanche/avalanche_jump.S 2005-07-07 04:39:14.418226000 +0200 -@@ -0,0 +1,69 @@ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+.text -+ -+.set noreorder -+.set noat -+ -+/* TLB Miss Vector */ -+ -+LEAF(jump_tlb_miss) -+ .set mips2 -+ lui k0,0x9400 -+ ori k0,0 -+ jr k0 -+ nop -+END(jump_tlb_miss) -+ -+ /* Unused TLB Miss Vector */ -+ -+LEAF(jump_tlb_miss_unused) -+ .set mips2 -+ lui k0,0x9400 -+ ori k0,0x80 -+ jr k0 -+ nop -+END(jump_tlb_miss_unused) -+ -+ /* Cache Error Vector */ -+ -+LEAF(jump_cache_error) -+ .set mips2 -+ lui k0,0x9400 -+ ori k0,0x100 -+ jr k0 -+ nop -+END(jump_cache_error) -+ -+ /* General Exception */ -+ -+LEAF(jump_general_exception) -+ .set mips2 -+ lui k0,0x9400 -+ ori k0,0x180 -+ jr k0 -+ nop -+END(jump_general_exception) -+ -+ /* Dedicated Interrupt */ -+ -+LEAF(jump_dedicated_interrupt) -+ .set mips2 -+ lui k0,0x9400 -+ ori k0,0x200 -+ jr k0 -+ nop -+END(jump_dedicated_interrupt) -+ -+ .set at -diff -urN linux.old/arch/mips/ar7/avalanche/avalanche_paging.c linux.dev/arch/mips/ar7/avalanche/avalanche_paging.c ---- linux.old/arch/mips/ar7/avalanche/avalanche_paging.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/avalanche/avalanche_paging.c 2005-07-07 04:39:14.418226000 +0200 -@@ -0,0 +1,314 @@ -+/* -+ * -*- linux-c -*- -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2002 by Jeff Harrell (jharrell@ti.com) -+ * Copyright (C) 2002 Texas Instruments, Inc. -+ * -+ */ -+ -+/* -+ * This file takes care of the "memory hole" issue that exists with the standard -+ * linux kernel and the TI Avalanche ASIC. The Avalanche ASIC requires an offset -+ * of 0x14000000 due to the ASIC's memory map constraints. This file corrects the -+ * paging tables so that the only reflect valid memory (i.e. > 0x14000000) -+ * -+ * -JAH -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#ifdef CONFIG_BLK_DEV_INITRD -+#include -+#endif /* CONFIG_BLK_DEV_INITRD */ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define __MEMORY_START CONFIG_AR7_MEMORY -+ -+#ifdef CONFIG_DISCONTIGMEM -+pg_data_t discontig_page_data[NR_NODES]; -+bootmem_data_t discontig_node_bdata[NR_NODES]; -+#endif -+ -+static unsigned long totalram_pages; -+/* static unsigned long totalhigh_pages; */ -+ -+#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) -+#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) -+ -+#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) -+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -+#define PFN_PHYS(x) ((x) << PAGE_SHIFT) -+ -+unsigned long bootmap_size; -+ -+extern char *prom_getenv(char *envname); -+ -+/* -+ * We have upto 8 empty zeroed pages so we can map one of the right colour -+ * when needed. This is necessary only on R4000 / R4400 SC and MC versions -+ * where we have to avoid VCED / VECI exceptions for good performance at -+ * any price. Since page is never written to after the initialization we -+ * don't have to care about aliases on other CPUs. -+ */ -+ -+static inline unsigned long setup_zero_pages(void) -+{ -+ unsigned long order, size; -+ struct page *page; -+ if(current_cpu_data.options & MIPS_CPU_VCE) -+ order = 3; -+ else -+ order = 0; -+ -+ empty_zero_page = __get_free_pages(GFP_KERNEL, order); -+ -+ if (!empty_zero_page) -+ panic("Oh boy, that early out of memory?"); -+ -+ page = virt_to_page(empty_zero_page); -+ -+ while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) { -+ set_bit(PG_reserved, &page->flags); -+ set_page_count(page, 0); -+ page++; -+ } -+ -+ size = PAGE_SIZE << order; -+ zero_page_mask = (size - 1) & PAGE_MASK; -+ memset((void *)empty_zero_page, 0, size); -+ -+ return 1UL << order; -+} -+ -+/* -+ * paging_init() sets up the page tables -+ * -+ * This routines also unmaps the page at virtual kernel address 0, so -+ * that we can trap those pesky NULL-reference errors in the kernel. -+ */ -+void __init paging_init(void) -+{ -+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; -+ unsigned long low, start_pfn; -+ -+ /* Initialize the entire pgd. */ -+ pgd_init((unsigned long)swapper_pg_dir); -+ pgd_init((unsigned long)swapper_pg_dir + PAGE_SIZE / 2); -+ -+ -+ start_pfn = START_PFN; -+ // max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; -+ low = MAX_LOW_PFN; -+ -+ /* Avalanche DMA-able memory 0x14000000+memsize */ -+ -+ zones_size[ZONE_DMA] = low - start_pfn; -+ -+ free_area_init_node(0, NODE_DATA(0), 0, zones_size, __MEMORY_START, 0); -+ -+#ifdef CONFIG_DISCONTIGMEM -+ zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT; -+ zones_size[ZONE_NORMAL] = 0; -+ free_area_init_node(1, NODE_DATA(1), 0, zones_size, __MEMORY_START_2ND, 0); -+#endif /* CONFIG_DISCONTIGMEM */ -+ -+} -+ -+extern char _ftext, _etext, _fdata, _edata, _end; -+extern char __init_begin, __init_end; -+ -+void __init mem_init(void) -+{ -+ int codesize, reservedpages, datasize, initsize; -+ int tmp; -+ -+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN; -+ high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE); -+ -+ /* free up the memory associated with Adam2 - -+ * that is the, after the first page that is -+ * reserved all the way up to the start of the kernel -+ */ -+ free_bootmem_node(NODE_DATA(0), (__MEMORY_START+PAGE_SIZE), -+ (__pa(&_ftext))-(__MEMORY_START+PAGE_SIZE) ); -+ -+ /* this will put all low memory onto the freelists */ -+ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); -+ -+ /* Setup zeroed pages */ -+ totalram_pages -= setup_zero_pages(); -+ -+ -+#ifdef CONFIG_DISCONTIGMEM -+ totalram_pages += free_all_bootmem_node(NODE_DATA(1)); -+#endif -+ reservedpages = 0; -+ for (tmp = 0; tmp < num_physpages; tmp++) -+ /* -+ * Only count reserved RAM pages -+ */ -+ if (PageReserved(mem_map+tmp)) -+ reservedpages++; -+ -+ codesize = (unsigned long) &_etext - (unsigned long) &_ftext; -+ datasize = (unsigned long) &_edata - (unsigned long) &_fdata; -+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; -+ -+ printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n", -+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), -+ max_mapnr << (PAGE_SHIFT-10), -+ codesize >> 10, -+ reservedpages << (PAGE_SHIFT-10), -+ datasize >> 10, -+ initsize >> 10); -+ -+} -+ -+/* fixes paging routines for avalanche (utilized in /arch/mips/kernel/setup.c) */ -+ -+void avalanche_bootmem_init(void) -+{ -+ unsigned long start_pfn, max_pfn; -+ unsigned long max_low_pfn; -+ unsigned int memsize,memory_end,memory_start; -+ char *memsize_str; -+ -+ memsize_str = prom_getenv("memsize"); -+ if (!memsize_str) { -+ memsize = 0x02000000; -+ } else { -+ memsize = simple_strtol(memsize_str, NULL, 0); -+ } -+ -+ -+ memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; -+ memory_end = memory_start + memsize; -+ -+ /* -+ * Find the highest memory page fram number we have available -+ */ -+ -+ max_pfn = PFN_DOWN(__pa(memory_end)); -+ -+ /* -+ * Determine the low and high memory ranges -+ */ -+ -+ max_low_pfn = max_pfn; -+ -+ /* -+ * Partially used pages are not usable - thus we are -+ * rounding upwards: -+ */ -+ -+ start_pfn = PFN_UP(__pa(&_end)); -+ -+ /* -+ * Find a proper area for the bootmem bitmap. After this -+ * bootstrap step all allocations (until the page allocator is -+ * intact) must be done via bootmem_alloc(). -+ */ -+ -+ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, -+ __MEMORY_START>>PAGE_SHIFT, max_low_pfn); -+ -+ -+ /* -+ * Register fully available low RAM pages with the bootmem allocator. -+ */ -+ -+ { -+ unsigned long curr_pfn, last_pfn, pages; -+ -+ /* -+ * We are rounding up the start address of usable memory: -+ */ -+ curr_pfn = PFN_UP(__MEMORY_START); -+ -+ /* -+ * ... and at the end of the usable range downwards: -+ */ -+ last_pfn = PFN_DOWN(__pa(memory_end)); -+ -+ if (last_pfn > max_low_pfn) -+ last_pfn = max_low_pfn; -+ -+ pages = last_pfn - curr_pfn; -+ -+ -+ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), -+ PFN_PHYS(pages)); -+ } -+ -+ /* -+ * Reserve the kernel text and -+ * Reserve the bootmem bitmap. We do this in two steps (first step -+ * was init_bootmem()), because this catches the (definitely buggy) -+ * case of us accidentally initializing the bootmem allocator with -+ * an invalid RAM area. -+ */ -+ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE, -+ (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); -+ -+ /* -+ * reserve physical page 0 - it's a special BIOS page on many boxes, -+ * enabling clean reboots, SMP operation, laptop functions. -+ */ -+ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); -+} -+ -+extern char __init_begin, __init_end; -+ -+void free_initmem(void) -+{ -+ unsigned long addr; -+ // prom_free_prom_memory (); -+ -+ addr = (unsigned long) &__init_begin; -+ while (addr < (unsigned long) &__init_end) { -+ ClearPageReserved(virt_to_page(addr)); -+ set_page_count(virt_to_page(addr), 1); -+ free_page(addr); -+ totalram_pages++; -+ addr += PAGE_SIZE; -+ } -+ printk("Freeing unused kernel memory: %dk freed\n", -+ (&__init_end - &__init_begin) >> 10); -+} -+ -+void si_meminfo(struct sysinfo *val) -+{ -+ val->totalram = totalram_pages; -+ val->sharedram = 0; -+ val->freeram = nr_free_pages(); -+ val->bufferram = atomic_read(&buffermem_pages); -+ val->totalhigh = 0; -+ val->freehigh = nr_free_highpages(); -+ val->mem_unit = PAGE_SIZE; -+ -+ return; -+} -diff -urN linux.old/arch/mips/ar7/avalanche/Makefile linux.dev/arch/mips/ar7/avalanche/Makefile ---- linux.old/arch/mips/ar7/avalanche/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/avalanche/Makefile 2005-07-07 04:39:14.417226000 +0200 -@@ -0,0 +1,13 @@ -+.S.s: -+ $(CPP) $(AFLAGS) $< -o $*.s -+ -+.S.o: -+ $(CC) $(AFLAGS) -c $< -o $*.o -+ -+EXTRA_CFLAGS := -DLITTLE_ENDIAN -D_LINK_KSEG0_ -+ -+O_TARGET := avalanche.o -+ -+obj-y += avalanche_paging.o avalanche_jump.o -+ -+include $(TOPDIR)/Rules.make diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c --- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/cmdline.c 2005-07-07 04:39:14.419226000 +0200 ++++ linux.dev/arch/mips/ar7/cmdline.c 2005-08-12 19:32:05.137225512 +0200 @@ -0,0 +1,64 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -476,8 +68,8 @@ diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c +} diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c --- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/init.c 2005-07-07 04:39:14.419226000 +0200 -@@ -0,0 +1,144 @@ ++++ linux.dev/arch/mips/ar7/init.c 2005-08-12 19:34:07.215666768 +0200 +@@ -0,0 +1,182 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. @@ -501,6 +93,7 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c +#include +#include +#include ++#include + +#include +#include @@ -519,10 +112,14 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c +#define MAX_ENV_ENTRY 80 + +static t_env_var local_envp[MAX_ENV_ENTRY]; -+ ++static int env_type = 0; +int init_debug = 0; + -+char *prom_getenv(char *envname) ++unsigned int max_env_entry; ++ ++extern char *prom_psp_getenv(char *envname); ++ ++static inline char *prom_adam2_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. @@ -530,9 +127,12 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c + * in the PROM structures are only 32-bit, so we need some + * workarounds, if we are running in 64-bit mode. + */ -+ int i, index=0; ++ int i; + t_env_var *env = (t_env_var *) local_envp; + ++ if (strcmp("bootloader", envname) == 0) ++ return "Adam2"; ++ + i = strlen(envname); + while (env->name) { + if(strncmp(envname, env->name, i) == 0) { @@ -544,6 +144,14 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c + return NULL; +} + ++char *prom_getenv(char *envname) ++{ ++ if (env_type == 1) ++ return prom_psp_getenv(envname); ++ else ++ return prom_adam2_getenv(envname); ++} ++ +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') @@ -590,27 +198,49 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c + return 0; +} + ++struct psbl_rec { ++ unsigned int psbl_size; ++ unsigned int env_base; ++ unsigned int env_size; ++ unsigned int ffs_base; ++ unsigned int ffs_size; ++}; ++ ++static const char psp_env_version[] = "TIENV0.8"; ++ +int __init prom_init(int argc, char **argv, char **envp) +{ + int i; ++ + t_env_var *env = (t_env_var *) envp; ++ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300)); ++ void *psp_env = (void *)KSEG1ADDR(psbl->env_base); + + prom_argc = argc; + _prom_argv = (int *)argv; + _prom_envp = (int *)envp; + -+ /* Copy what we need locally so we are not dependent on -+ * bootloader RAM. In Adam2, the environment parameters -+ * are in flash but the table that references them is in -+ * RAM -+ */ -+ for(i=0; i < MAX_ENV_ENTRY; i++, env++) { -+ if (env->name) { -+ local_envp[i].name = env->name; -+ local_envp[i].val = env->val; -+ } else { -+ local_envp[i].name = NULL; -+ local_envp[i].val = NULL; ++ if(strcmp(psp_env, psp_env_version) == 0) { ++ /* PSPBOOT */ ++ ++ env_type = 1; ++ _prom_envp = psp_env; ++ max_env_entry = (psbl->env_size / 16) - 1; ++ } else { ++ /* Copy what we need locally so we are not dependent on ++ * bootloader RAM. In Adam2, the environment parameters ++ * are in flash but the table that references them is in ++ * RAM ++ */ ++ ++ for(i=0; i < MAX_ENV_ENTRY; i++, env++) { ++ if (env->name) { ++ local_envp[i].name = env->name; ++ local_envp[i].val = env->val; ++ } else { ++ local_envp[i].name = NULL; ++ local_envp[i].val = NULL; ++ } + } + } + @@ -624,8 +254,8 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c +} diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c --- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/irq.c 2005-07-07 04:39:14.420226000 +0200 -@@ -0,0 +1,669 @@ ++++ linux.dev/arch/mips/ar7/irq.c 2005-08-12 23:42:18.679820112 +0200 +@@ -0,0 +1,709 @@ +/* + * Nitin Dhingra, iamnd@ti.com + * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved. @@ -1013,6 +643,7 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c +extern int remote_debug; +#endif + ++ +//void init_IRQ(void) __init; +void __init init_IRQ(void) +{ @@ -1071,7 +702,6 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c +#endif +} + -+ +void avalanche_hw0_irqdispatch(struct pt_regs *regs) +{ + struct irqaction *action; @@ -1295,26 +925,68 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + +} + ++ ++#define AVALANCHE_MAX_PACING_BLK 3 ++#define AVALANCHE_PACING_LOW_VAL 2 ++#define AVALANCHE_PACING_HIGH_VAL 63 ++ ++int avalanche_request_pacing(int irq_nr, unsigned int blk_num, ++ unsigned int pace_value) ++{ ++ unsigned int blk_offset; ++ unsigned long flags; ++ ++ if(irq_nr < MIPS_EXCEPTION_OFFSET && ++ irq_nr >= AVALANCHE_INT_END_PRIMARY) ++ return (0); ++ ++ if(blk_num > AVALANCHE_MAX_PACING_BLK) ++ return(-1); ++ ++ if(pace_value > AVALANCHE_PACING_HIGH_VAL && ++ pace_value < AVALANCHE_PACING_LOW_VAL) ++ return(-1); ++ ++ blk_offset = blk_num*8; ++ ++ save_and_cli(flags); ++ ++ /* disable the interrupt pacing, if enabled previously */ ++ avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset); ++ ++ /* clear the pacing map */ ++ avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset); ++ ++ /* setup the new values */ ++ avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr)) << blk_offset); ++ avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value) << blk_offset); ++ ++ restore_flags(flags); ++ ++ return(0); ++} diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile --- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/Makefile 2005-07-07 04:39:14.417226000 +0200 -@@ -0,0 +1,12 @@ ++++ linux.dev/arch/mips/ar7/Makefile 2005-08-12 21:21:30.425150040 +0200 +@@ -0,0 +1,14 @@ +.S.s: + $(CPP) $(AFLAGS) $< -o $*.s + +.S.o: + $(CC) $(AFLAGS) -c $< -o $*.o + ++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_ +O_TARGET := ar7.o + -+obj-y := tnetd73xx_misc.o -+obj-y += setup.o irq.o mipsIRQ.o reset.o init.o memory.o printf.o cmdline.o time.o ++obj-y := tnetd73xx_misc.o misc.o ++export-objs := misc.o ++obj-y += setup.o irq.o mipsIRQ.o reset.o init.o psp_env.o memory.o printf.o cmdline.o time.o + +include $(TOPDIR)/Rules.make diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c --- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/memory.c 2005-07-07 04:39:14.420226000 +0200 -@@ -0,0 +1,130 @@ ++++ linux.dev/arch/mips/ar7/memory.c 2005-08-12 19:52:25.301732312 +0200 +@@ -0,0 +1,131 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. @@ -1348,7 +1020,6 @@ diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c +#include +#include +#include -+#include + +enum yamon_memtypes { + yamon_dontuse, @@ -1379,15 +1050,15 @@ diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c + + mdesc[0].type = yamon_dontuse; + mdesc[0].base = 0x00000000; -+ mdesc[0].size = AVALANCHE_SDRAM_BASE; ++ mdesc[0].size = CONFIG_AR7_MEMORY; + + mdesc[1].type = yamon_prom; -+ mdesc[1].base = AVALANCHE_SDRAM_BASE; ++ mdesc[1].base = CONFIG_AR7_MEMORY; + mdesc[1].size = 0x00020000; + + mdesc[2].type = yamon_free; -+ mdesc[2].base = AVALANCHE_SDRAM_BASE + 0x00020000; -+ mdesc[2].size = (memsize + AVALANCHE_SDRAM_BASE) - mdesc[2].base; ++ mdesc[2].base = CONFIG_AR7_MEMORY + 0x00020000; ++ mdesc[2].size = (memsize + CONFIG_AR7_MEMORY) - mdesc[2].base; + + return &mdesc[0]; +} @@ -1425,6 +1096,7 @@ diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c + +void __init prom_free_prom_memory (void) +{ ++#if 0 + int i; + unsigned long freed = 0; + unsigned long addr; @@ -1444,10 +1116,11 @@ diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c + } + } + printk("Freeing prom memory: %ldkb freed\n", freed >> 10); ++#endif +} diff -urN linux.old/arch/mips/ar7/mipsIRQ.S linux.dev/arch/mips/ar7/mipsIRQ.S --- linux.old/arch/mips/ar7/mipsIRQ.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/mipsIRQ.S 2005-07-07 04:39:14.421226000 +0200 ++++ linux.dev/arch/mips/ar7/mipsIRQ.S 2005-08-12 19:32:05.138225360 +0200 @@ -0,0 +1,120 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -1569,300 +1242,406 @@ diff -urN linux.old/arch/mips/ar7/mipsIRQ.S linux.dev/arch/mips/ar7/mipsIRQ.S + j ret_from_irq + nop +END(mipsIRQ) -diff -urN linux.old/arch/mips/ar7/printf.c linux.dev/arch/mips/ar7/printf.c ---- linux.old/arch/mips/ar7/printf.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/printf.c 2005-07-07 04:39:14.421226000 +0200 -@@ -0,0 +1,51 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Putting things on the screen/serial line using Adam2 facilities. -+ */ -+ -+#include -+#include -+#include -+#include +diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c +--- linux.old/arch/mips/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/misc.c 2005-08-12 19:32:05.136225664 +0200 +@@ -0,0 +1,319 @@ ++#include ++#include ++#include +#include -+#include -+#include -+#include -+#include + -+static char ppbuf[1024]; ++#define TRUE 1 + -+void (*prom_print_str)(unsigned int out, char *s, int len); ++static unsigned int avalanche_vbus_freq; + -+void prom_printf(char *fmt, ...) __init; -+void prom_printf(char *fmt, ...) ++REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL; ++ ++/***************************************************************************** ++ * Reset Control Module. ++ *****************************************************************************/ ++void avalanche_reset_ctrl(unsigned int module_reset_bit, ++ AVALANCHE_RESET_CTRL_T reset_ctrl) +{ -+ va_list args; -+ int len; -+ prom_print_str = (void *)*(unsigned int *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR; ++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR; ++ ++ if(module_reset_bit >= 32 && module_reset_bit < 64) ++ return; ++ ++ if(module_reset_bit >= 64) ++ { ++ if(p_remote_vlynq_dev_reset_ctrl) ++ return(p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl)); ++ else ++ return; ++ } ++ ++ if(reset_ctrl == OUT_OF_RESET) ++ *reset_reg |= 1 << module_reset_bit; ++ else ++ *reset_reg &= ~(1 << module_reset_bit); ++} + -+ va_start(args, fmt); -+ vsprintf(ppbuf, fmt, args); -+ len = strlen(ppbuf); ++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit) ++{ ++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR; + -+ prom_print_str(1, ppbuf, len); ++ return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET ); ++} + -+ va_end(args); -+ return; ++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode) ++{ ++ volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR; ++ *sw_reset_reg = mode; ++} ++ ++#define AVALANCHE_RST_CTRL_RSR_MASK 0x3 ++ ++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status() ++{ ++ volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR; + ++ return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) ); +} -diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c ---- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/reset.c 2005-07-07 04:39:14.421226000 +0200 -@@ -0,0 +1,54 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Reset the MIPS boards. -+ * -+ */ -+#include + -+#include -+#include + -+static void ar7_machine_restart(char *command); -+static void ar7_machine_halt(void); -+static void ar7_machine_power_off(void); ++/***************************************************************************** ++ * Power Control Module ++ *****************************************************************************/ ++#define AVALANCHE_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */ ++#define AVALANCHE_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */ + -+static void ar7_machine_restart(char *command) -+{ + ++void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl) ++{ ++ volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; ++ ++ if (power_ctrl == POWER_CTRL_POWER_DOWN) ++ /* power down the module */ ++ *power_reg |= (1 << module_power_bit); ++ else ++ /* power on the module */ ++ *power_reg &= (~(1 << module_power_bit)); +} + -+static void ar7_machine_halt(void) ++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit) +{ ++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; + ++ return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP); +} + -+static void ar7_machine_power_off(void) ++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode) +{ ++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; + ++ *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK; ++ *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT); +} + -+void ar7_reboot_setup(void) ++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void) +{ -+ _machine_restart = ar7_machine_restart; -+ _machine_halt = ar7_machine_halt; -+ _machine_power_off = ar7_machine_power_off; ++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR; ++ ++ return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK)) ++ >> AVALANCHE_GLOBAL_POWER_DOWN_BIT)); +} -diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c ---- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/setup.c 2005-07-07 06:45:41.786771352 +0200 -@@ -0,0 +1,167 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ */ -+#include -+#include -+#include -+#include -+#include + -+#include -+#include -+#include -+#include -+#include ++/***************************************************************************** ++ * GPIO Control ++ *****************************************************************************/ + -+#include -+#include -+#include ++/**************************************************************************** ++ * FUNCTION: avalanche_gpio_init ++ ***************************************************************************/ ++void avalanche_gpio_init(void) ++{ ++ spinlock_t closeLock; ++ unsigned int closeFlag; ++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR; ++ spin_lock_irqsave(&closeLock, closeFlag); ++ *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT); ++ spin_unlock_irqrestore(&closeLock, closeFlag); ++} + ++/**************************************************************************** ++ * FUNCTION: avalanche_gpio_ctrl ++ ***************************************************************************/ ++int avalanche_gpio_ctrl(unsigned int gpio_pin, ++ AVALANCHE_GPIO_PIN_MODE_T pin_mode, ++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction) ++{ ++ spinlock_t closeLock; ++ unsigned int closeFlag; ++ volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL; ++ ++ if(gpio_pin >= 32) ++ return(-1); ++ ++ spin_lock_irqsave(&closeLock, closeFlag); ++ ++ if(pin_mode == GPIO_PIN) ++ { ++ *gpio_ctrl |= (1 << gpio_pin); ++ ++ gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR; ++ ++ if(pin_direction == GPIO_INPUT_PIN) ++ *gpio_ctrl |= (1 << gpio_pin); ++ else ++ *gpio_ctrl &= ~(1 << gpio_pin); ++ } ++ else /* FUNCTIONAL PIN */ ++ { ++ *gpio_ctrl &= ~(1 << gpio_pin); ++ } ++ ++ spin_unlock_irqrestore(&closeLock, closeFlag); ++ ++ return (0); ++} + -+#define _LINK_KSEG0_ -+#define LITTLE_ENDIAN -+#include -+#include ++/**************************************************************************** ++ * FUNCTION: avalanche_gpio_out ++ ***************************************************************************/ ++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value) ++{ ++ spinlock_t closeLock; ++ unsigned int closeFlag; ++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT; ++ ++ if(gpio_pin >= 32) ++ return(-1); ++ ++ spin_lock_irqsave(&closeLock, closeFlag); ++ if(value == TRUE) ++ *gpio_out |= 1 << gpio_pin; ++ else ++ *gpio_out &= ~(1 << gpio_pin); ++ spin_unlock_irqrestore(&closeLock, closeFlag); ++ ++ return(0); ++} + -+// Specific for ar7wrd -+unsigned int tnetd73xx_vbus_freq; -+#define BOOTCR_MIPS_ASYNC_MODE (1 << 25) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000 ++/**************************************************************************** ++ * FUNCTION: avalanche_gpio_in ++ ***************************************************************************/ ++int avalanche_gpio_in_bit(unsigned int gpio_pin) ++{ ++ spinlock_t closeLock; ++ unsigned int closeFlag; ++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN; ++ int ret_val = 0; ++ ++ if(gpio_pin >= 32) ++ return(-1); ++ ++ spin_lock_irqsave(&closeLock, closeFlag); ++ ret_val = ((*gpio_in) & (1 << gpio_pin)); ++ spin_unlock_irqrestore(&closeLock, closeFlag); ++ ++ return (ret_val); ++} + -+#if defined(CONFIG_AR7_MARVELL) -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000 -+#else -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2 -+#endif ++/**************************************************************************** ++ * FUNCTION: avalanche_gpio_out_val ++ ***************************************************************************/ ++int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask, ++ unsigned int reg_index) ++{ ++ spinlock_t closeLock; ++ unsigned int closeFlag; ++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT; + ++ if(reg_index > 0) ++ return(-1); + -+#ifdef CONFIG_KGDB -+extern void rs_kgdb_hook(int); -+int remote_debug = 0; -+#endif ++ spin_lock_irqsave(&closeLock, closeFlag); ++ *gpio_out &= ~out_mask; ++ *gpio_out |= out_val; ++ spin_unlock_irqrestore(&closeLock, closeFlag); + -+extern struct rtc_ops no_rtc_ops; ++ return(0); ++} + -+extern void ar7_reboot_setup(void); ++/**************************************************************************** ++ * FUNCTION: avalanche_gpio_in_value ++ ***************************************************************************/ ++int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index) ++{ ++ spinlock_t closeLock; ++ unsigned int closeFlag; ++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN; ++ ++ if(reg_index > 0) ++ return(-1); + -+extern void ar7_time_init(void); -+extern void ar7_timer_setup(struct irqaction *irq); ++ spin_lock_irqsave(&closeLock, closeFlag); ++ *in_val = *gpio_in; ++ spin_unlock_irqrestore(&closeLock, closeFlag); + -+/* maybe some of this is not needed? */ -+static void ar7_platform_init(void) -+{ -+ //tnetd73xx_gpio_init(); ++ return (0); ++} + -+ tnetd73xx_reset_ctrl(RESET_MODULE_UART0, OUT_OF_RESET); -+ //tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET); -+ //REG32_WRITE(TNETD73XX_GPIOENR, 0xf3fc3ff0); ++/*********************************************************************** ++ * ++ * Wakeup Control Module for TNETV1050 Communication Processor ++ * ++ ***********************************************************************/ + -+ //tnetd73xx_reset_ctrl(RESET_MODULE_EPHY, IN_RESET); -+ //tnetd73xx_reset_ctrl(RESET_MODULE_EPHY, OUT_OF_RESET); ++#define AVALANCHE_WAKEUP_POLARITY_BIT 16 + -+ tnetd73xx_clkc_init(AFECLK_FREQ, REFCLK_FREQ, OSC3_FREQ); ++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int, ++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl, ++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity) ++{ ++ volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR; ++ ++ /* enable/disable */ ++ if (wakeup_ctrl == WAKEUP_ENABLED) ++ /* enable wakeup */ ++ *wakeup_status_reg |= wakeup_int; ++ else ++ /* disable wakeup */ ++ *wakeup_status_reg &= (~wakeup_int); ++ ++ /* set polarity */ ++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW) ++ *wakeup_status_reg |= (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT); ++ else ++ *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT); ++} + -+ tnetd73xx_vbus_freq = tnetd73xx_clkc_get_freq(CLKC_SYS) / 2; ++void avalanche_set_vbus_freq(unsigned int new_vbus_freq) ++{ ++ avalanche_vbus_freq = new_vbus_freq; ++} + -+#if defined(CONFIG_AR7WRD) -+ if(! (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE)) { -+ tnetd73xx_clkc_set_freq(CLKC_MIPS, CLK_MHZ(150)); -+ } -+#endif ++unsigned int avalanche_get_vbus_freq() ++{ ++ return(avalanche_vbus_freq); ++} + ++unsigned int avalanche_get_chip_version_info() ++{ ++ return(*(volatile unsigned int*)AVALANCHE_CVR); +} + -+const char *get_system_type(void) ++SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL; ++ ++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation) +{ -+ return "Texas Instruments AR7"; ++ if(p_set_mdix_on_chip_fn) ++ return (p_set_mdix_on_chip_fn(base_addr, operation)); ++ else ++ return(-1); +} + -+void __init ar7_setup(void) ++unsigned int avalanche_is_mdix_on_chip(void) +{ -+#ifdef CONFIG_KGDB -+ int rs_putDebugChar(char); -+ char rs_getDebugChar(void); -+ extern int (*generic_putDebugChar)(char); -+ extern char (*generic_getDebugChar)(void); ++ return(p_set_mdix_on_chip_fn ? 1:0); ++} ++ ++EXPORT_SYMBOL(avalanche_reset_ctrl); ++EXPORT_SYMBOL(avalanche_get_reset_status); ++EXPORT_SYMBOL(avalanche_sys_reset); ++EXPORT_SYMBOL(avalanche_get_sys_last_reset_status); ++EXPORT_SYMBOL(avalanche_power_ctrl); ++EXPORT_SYMBOL(avalanche_get_power_status); ++EXPORT_SYMBOL(avalanche_set_global_power_mode); ++EXPORT_SYMBOL(avalanche_get_global_power_mode); ++EXPORT_SYMBOL(avalanche_set_mdix_on_chip); ++EXPORT_SYMBOL(avalanche_is_mdix_on_chip); ++ ++EXPORT_SYMBOL(avalanche_gpio_init); ++EXPORT_SYMBOL(avalanche_gpio_ctrl); ++EXPORT_SYMBOL(avalanche_gpio_out_bit); ++EXPORT_SYMBOL(avalanche_gpio_in_bit); ++EXPORT_SYMBOL(avalanche_gpio_out_value); ++EXPORT_SYMBOL(avalanche_gpio_in_value); ++ ++EXPORT_SYMBOL(avalanche_set_vbus_freq); ++EXPORT_SYMBOL(avalanche_get_vbus_freq); ++ ++EXPORT_SYMBOL(avalanche_get_chip_version_info); ++ +diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h +--- linux.old/arch/mips/ar7/platform.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/platform.h 2005-08-12 19:34:07.216666616 +0200 +@@ -0,0 +1,65 @@ ++#ifndef _PLATFORM_H_ ++#define _PLATFORM_H_ ++ ++#include ++ ++ ++/* Important: The definition of ENV_SPACE_SIZE should match with that in ++ * PSPBoot. (/psp_boot/inc/psbl/env.h) ++ */ ++#ifdef CONFIG_MIPS_AVALANCHE_TICFG ++#define ENV_SPACE_SIZE (10 * 1024) +#endif -+ char *argptr; -+#ifdef CONFIG_SERIAL_CONSOLE -+ argptr = prom_getcmdline(); -+ if ((argptr = strstr(argptr, "console=")) == NULL) { -+ char console[20]; -+ char *s; -+ int i = 0; -+ -+ s = prom_getenv("modetty0"); -+ strcpy(console, "38400"); -+ -+ if (s != NULL) { -+ while (s[i] >= '0' && s[i] <= '9') -+ i++; -+ -+ if (i > 0) { -+ strncpy(console, s, i); -+ console[i] = 0; -+ } -+ } -+ -+ argptr = prom_getcmdline(); -+ strcat(argptr, " console=ttyS0,"); -+ strcat(argptr, console); -+ } ++ ++#ifdef CONFIG_MIPS_TNETV1050SDB ++#define TNETV1050SDB ++#define DUAL_FLASH +#endif + -+#ifdef CONFIG_KGDB -+ argptr = prom_getcmdline(); -+ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { -+ int line; -+ argptr += strlen("kgdb=ttyS"); -+ if (*argptr != '0' && *argptr != '1') -+ printk("KGDB: Uknown serial line /dev/ttyS%c, " -+ "falling back to /dev/ttyS1\n", *argptr); -+ line = *argptr == '0' ? 0 : 1; -+ printk("KGDB: Using serial line /dev/ttyS%d for session\n", -+ line ? 1 : 0); ++#ifdef CONFIG_MIPS_AR7DB ++#define TNETD73XX_BOARD ++#define AR7DB ++#endif + -+ rs_kgdb_hook(line); -+ generic_putDebugChar = rs_putDebugChar; -+ generic_getDebugChar = rs_getDebugChar; ++#ifdef CONFIG_MIPS_AR7RD ++#define TNETD73XX_BOARD ++#define AR7RD ++#endif + -+ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, " -+ "please connect your debugger\n", line ? 1 : 0); ++#ifdef CONFIG_AR7WRD ++#define TNETD73XX_BOARD ++#define AR7WRD ++#endif + -+ remote_debug = 1; -+ /* Breakpoints are in init_IRQ() */ -+ } ++#ifdef CONFIG_MIPS_AR7VWI ++#define TNETD73XX_BOARD ++#define AR7VWi +#endif + -+ argptr = prom_getcmdline(); -+ if ((argptr = strstr(argptr, "nofpu")) != NULL) -+ cpu_data[0].options &= ~MIPS_CPU_FPU; ++/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */ ++#ifdef CONFIG_MIPS_AR7VW ++#define TNETD73XX_BOARD ++#define AR7WRD ++#endif + -+ rtc_ops = &no_rtc_ops; ++#ifdef CONFIG_MIPS_AR7WI ++#define TNETD73XX_BOARD ++#define AR7Wi ++#endif + -+ ar7_platform_init(); ++#ifdef CONFIG_MIPS_AR7V ++#define TNETD73XX_BOARD ++#define AR7V ++#endif + -+ ar7_reboot_setup(); ++#ifdef CONFIG_MIPS_AR7V ++#define TNETD73XX_BOARD ++#define AR7V ++#endif + -+ board_time_init = ar7_time_init; -+ board_timer_setup = ar7_timer_setup; -+} -diff -urN linux.old/arch/mips/ar7/time.c linux.dev/arch/mips/ar7/time.c ---- linux.old/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/time.c 2005-07-07 04:39:14.422226000 +0200 -@@ -0,0 +1,125 @@ ++#ifdef CONFIG_MIPS_WA1130 ++#define AVALANCHE ++#define WLAN ++#endif ++ ++#endif +diff -urN linux.old/arch/mips/ar7/printf.c linux.dev/arch/mips/ar7/printf.c +--- linux.old/arch/mips/ar7/printf.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/printf.c 2005-08-12 19:32:05.139225208 +0200 +@@ -0,0 +1,53 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * -+ * ######################################################################## -+ * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. @@ -1876,1090 +1655,1706 @@ diff -urN linux.old/arch/mips/ar7/time.c linux.dev/arch/mips/ar7/time.c + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * -+ * ######################################################################## -+ * -+ * Setting up the clock on the MIPS boards. -+ * ++ * Putting things on the screen/serial line using Adam2 facilities. + */ + -+#include +#include +#include -+#include -+#include ++#include ++#include +#include ++#include ++#include ++#include + -+#include -+#include -+#include -+#include ++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500)) ++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) + -+#include -+#include -+#include ++static char ppbuf[1024]; + -+#include -+#include -+#include ++void (*prom_print_str)(unsigned int out, char *s, int len); + -+extern asmlinkage void mipsIRQ(void); ++void prom_printf(char *fmt, ...) __init; ++void prom_printf(char *fmt, ...) ++{ ++ va_list args; ++ int len; ++ prom_print_str = (void *)*(unsigned int *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR; + -+static unsigned long r4k_offset; /* Amount to increment compare reg each time */ -+static unsigned long r4k_cur; /* What counter should be at next timer irq */ ++ va_start(args, fmt); ++ vsprintf(ppbuf, fmt, args); ++ len = strlen(ppbuf); + -+#define MIPS_CPU_TIMER_IRQ 7 -+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) ++ prom_print_str(1, ppbuf, len); ++ ++ va_end(args); ++ return; + -+static inline void ack_r4ktimer(unsigned long newval) -+{ -+ write_c0_compare(newval); +} +diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c +--- linux.old/arch/mips/ar7/psp_env.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/psp_env.c 2005-08-12 19:34:07.216666616 +0200 +@@ -0,0 +1,350 @@ ++#include ++#include ++#include ++#include ++#include ++#include + -+void ar7_timer_interrupt(struct pt_regs *regs) -+{ -+ int cpu = smp_processor_id(); ++#include "platform.h" + -+ irq_enter(cpu, MIPS_CPU_TIMER_IRQ); ++#define ENV_CELL_SIZE 16 + -+ if (r4k_offset == 0) -+ goto null; ++/* control field decode */ ++#define ENV_GARBAGE_BIT 0x01 /* Env is garbage if this bit is off */ ++#define ENV_DYNAMIC_BIT 0x02 /* Env is dynamic if this bit is off */ + -+ do { -+ kstat.irqs[cpu][MIPS_CPU_TIMER_IRQ]++; -+ do_timer(regs); -+ r4k_cur += r4k_offset; -+ ack_r4ktimer(r4k_cur); ++#define ENV_CTRL_MASK 0x03 ++#define ENV_PREFINED (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT) ++#define ENV_DYNAMIC (ENV_GARBAGE_BIT) + -+ } while (((unsigned long)read_c0_count() -+ - r4k_cur) < 0x7fffffff); ++struct env_variable { ++ unsigned char varNum; ++ unsigned char ctrl; ++ unsigned short chksum; ++ unsigned char numCells; ++ unsigned char data[ENV_CELL_SIZE - 5]; /* The data section starts ++ * here, continues for ++ * numCells. ++ */ ++}; + -+ irq_exit(cpu, MIPS_CPU_TIMER_IRQ); ++extern unsigned int max_env_entry; ++ ++/* Internal macros */ ++#define get_next_block(var) ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE)) ++ ++typedef enum ENV_VARS { ++ env_vars_start = 0, ++ CPUFREQ, ++ MEMSZ, ++ FLASHSZ, ++ MODETTY0, ++ MODETTY1, ++ PROMPT, ++ BOOTCFG, ++ HWA_0, ++#if !defined (AVALANCHE) || defined(TNETC401B) ++ HWA_1, ++#endif ++#if !defined(TNETV1020_BOARD) ++ HWA_RNDIS, ++#endif ++#if defined (TNETD73XX_BOARD) ++ HWA_3, ++#endif ++ IPA, ++ IPA_SVR, ++ BLINE_MAC0, ++#if !defined (AVALANCHE) || defined(TNETC401B) ++ BLINE_MAC1, ++#endif ++#if !defined(TNETV1020_BOARD) ++ BLINE_RNDIS, ++#endif ++#if defined (TNETD73XX_BOARD) ++ BLINE_ATM, ++#endif ++#if !defined(TNETV1020_BOARD) ++ USB_PID, ++ USB_VID, ++ USB_EPPOLLI, ++#endif ++ IPA_GATEWAY, ++ SUBNET_MASK, ++#if defined (TNETV1050_BOARD) ++ BLINE_ESWITCH, ++#endif ++#if !defined(TNETV1020_BOARD) ++ USB_SERIAL, ++ HWA_HRNDIS, /* Host (PC) side RNDIS address */ ++#endif ++ REMOTE_USER, ++ REMOTE_PASS, ++ REMOTE_DIR, ++ SYSFREQ, ++ LINK_TIMEOUT, ++#ifndef AVALANCHE /* Avalanche boards use only one mac port */ ++ MAC_PORT, ++#endif ++ PATH, ++ HOSTNAME, ++#ifdef WLAN ++ HW_REV_MAJOR, ++ HW_REV_MINOR, ++ HW_PATCH, ++ SW_PATCH, ++ SERIAL_NUMBER, ++#endif ++ TFTPCFG, ++#if defined (TNETV1050_BOARD) ++ HWA_ESWITCH, ++#endif ++ /* ++ * Add new env variables here. ++ * NOTE: New environment variables should always be placed at the end, ie ++ * just before env_vars_end. ++ */ + -+ if (softirq_pending(cpu)) -+ do_softirq(); ++ env_vars_end ++} ENV_VARS; + -+ return; + -+null: -+ ack_r4ktimer(0); -+} ++struct env_description { ++ ENV_VARS idx; ++ char *nm; ++ char *alias; ++}; + -+/* -+ * Figure out the r4k offset, the amount to increment the compare -+ * register for each time tick. -+ */ -+static unsigned long __init cal_r4koff(void) -+{ -+ return ((CONFIG_AR7_FREQUENCY*500000)/HZ); -+} ++#define ENVSTR(x) #x ++#define _ENV_ENTRY(x) {.idx = x, .nm = ENVSTR(x), .alias = NULL} ++ ++struct env_description env_ns[] = { ++ _ENV_ENTRY(env_vars_start), /* start. */ ++ _ENV_ENTRY(CPUFREQ), ++ _ENV_ENTRY(MEMSZ), ++ _ENV_ENTRY(FLASHSZ), ++ _ENV_ENTRY(MODETTY0), ++ _ENV_ENTRY(MODETTY1), ++ _ENV_ENTRY(PROMPT), ++ _ENV_ENTRY(BOOTCFG), ++ _ENV_ENTRY(HWA_0), ++#if !defined (AVALANCHE) || defined(TNETC401B) ++ _ENV_ENTRY(HWA_1), ++#endif ++#if !defined(TNETV1020_BOARD) ++ _ENV_ENTRY(HWA_RNDIS), ++#endif ++#if defined (TNETD73XX_BOARD) ++ _ENV_ENTRY(HWA_3), ++#endif ++ _ENV_ENTRY(IPA), ++ _ENV_ENTRY(IPA_SVR), ++ _ENV_ENTRY(IPA_GATEWAY), ++ _ENV_ENTRY(SUBNET_MASK), ++ _ENV_ENTRY(BLINE_MAC0), ++#if !defined (AVALANCHE) || defined(TNETC401B) ++ _ENV_ENTRY(BLINE_MAC1), ++#endif ++#if !defined(TNETV1020_BOARD) ++ _ENV_ENTRY(BLINE_RNDIS), ++#endif ++#if defined (TNETD73XX_BOARD) ++ _ENV_ENTRY(BLINE_ATM), ++#endif ++#if !defined(TNETV1020_BOARD) ++ _ENV_ENTRY(USB_PID), ++ _ENV_ENTRY(USB_VID), ++ _ENV_ENTRY(USB_EPPOLLI), ++#endif ++#if defined (TNETV1050_BOARD) ++ _ENV_ENTRY(BLINE_ESWITCH), ++#endif ++#if !defined(TNETV1020_BOARD) ++ _ENV_ENTRY(USB_SERIAL), ++ _ENV_ENTRY(HWA_HRNDIS), ++#endif ++ _ENV_ENTRY(REMOTE_USER), ++ _ENV_ENTRY(REMOTE_PASS), ++ _ENV_ENTRY(REMOTE_DIR), ++ _ENV_ENTRY(SYSFREQ), ++ _ENV_ENTRY(LINK_TIMEOUT), ++#ifndef AVALANCHE /* Avalanche boards use only one mac port */ ++ _ENV_ENTRY(MAC_PORT), ++#endif ++ _ENV_ENTRY(PATH), ++ _ENV_ENTRY(HOSTNAME), ++#ifdef WLAN ++ _ENV_ENTRY(HW_REV_MAJOR), ++ _ENV_ENTRY(HW_REV_MINOR), ++ _ENV_ENTRY(HW_PATCH), ++ _ENV_ENTRY(SW_PATCH), ++ _ENV_ENTRY(SERIAL_NUMBER), ++#endif ++ _ENV_ENTRY(TFTPCFG), ++#if defined (TNETV1050_BOARD) ++ _ENV_ENTRY(HWA_ESWITCH), ++#endif ++ /* ++ * Add new entries below this. ++ */ ++ /* Adam2 environment name alias. */ ++ { .idx = IPA, .nm = "my_ipaddress" }, ++ { .idx = CPUFREQ, .nm = "cpufrequency" }, ++ { .idx = SYSFREQ, .nm = "sysfrequency" }, ++ { .idx = HWA_0, .nm = "maca" }, ++#ifndef AVALANCHE ++ { .idx = HWA_1, .nm = "macb" }, ++#endif ++ { .idx = MODETTY0, .nm = "modetty0" }, ++ { .idx = MODETTY1, .nm = "modetty1" }, ++ { .idx = MEMSZ, .nm = "memsize" }, + -+void __init ar7_time_init(void) -+{ -+ unsigned long flags; -+ unsigned int est_freq; ++ _ENV_ENTRY(env_vars_end) /* delimiter. */ ++}; + -+ set_except_vector(0, mipsIRQ); -+ write_c0_count(0); ++static inline int var_to_idx(const char* var) ++{ ++ int ii; + -+ printk("calculating r4koff... "); -+ r4k_offset = cal_r4koff(); -+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); ++ /* go over the list of pre-defined environment variables */ ++ for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){ ++ /* check if the env variable is listed */ ++ if (strcmp(env_ns[ii].nm, var) == 0) { ++ return env_ns[ii].idx; ++ } + -+ est_freq = 2*r4k_offset*HZ; -+ est_freq += 5000; /* round */ -+ est_freq -= est_freq%10000; -+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, -+ (est_freq%1000000)*100/1000000); ++ /* if an alias is present, check if the alias matches ++ * the description ++ */ ++ if (env_ns[ii].alias != NULL) { ++ if (strcmp(env_ns[ii].alias, var) == 0) { ++ return env_ns[ii].idx; ++ } ++ } ++ } ++ return 0; +} + -+void __init ar7_timer_setup(struct irqaction *irq) -+{ -+ /* we are using the cpu counter for timer interrupts */ -+ irq->handler = no_action; /* we use our own handler */ -+ setup_irq(MIPS_CPU_TIMER_IRQ, irq); ++extern int *_prom_envp; + -+ r4k_cur = (read_c0_count() + r4k_offset); -+ write_c0_compare(r4k_cur); -+ set_c0_status(ALLINTS); -+} -diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c ---- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-07-07 04:39:14.423225000 +0200 -@@ -0,0 +1,924 @@ -+/****************************************************************************** -+ * FILE PURPOSE: TNETD73xx Misc modules API Source -+ ****************************************************************************** -+ * FILE NAME: tnetd73xx_misc.c -+ * -+ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO -+ * FSER Modules API -+ * As per TNETD73xx specifications -+ * -+ * REVISION HISTORY: -+ * 27 Nov 02 - Sharath Kumar PSP TII -+ * 14 Feb 03 - Anant Gole PSP TII ++/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage, ++ * the next read some seconds later is ok. It looks like something is hidding or ++ * overlay the flash address at 0xb0000000. Is this possible? + * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ ++ * The readb() and while() usage below is a attempt of a workarround - with limited success. ++ */ + -+#define LITTLE_ENDIAN -+#define _LINK_KSEG0_ ++static inline struct env_variable* get_var_by_number(int index) ++{ ++ struct env_variable *env_var = (struct env_variable *)_prom_envp; ++ volatile unsigned char nr; ++ int i; + -+#include -+#include -+#include ++ env_var++; /* skip signature */ + -+/* TNETD73XX Revision */ -+u32 tnetd73xx_get_revision(void) -+{ -+ /* Read Chip revision register - This register is from GPIO module */ -+ return ( (u32) REG32_DATA(TNETD73XX_CVR)); -+} ++ i = 0; ++ nr = readb(&(env_var->varNum)); + -+/***************************************************************************** -+ * Reset Control Module -+ *****************************************************************************/ ++ while (i < max_env_entry && nr != 0xFF) { ++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) { ++ if (nr == index) { ++ return env_var; ++ } ++ } ++ i++; ++ env_var = get_next_block(env_var); ++ nr = readb(&(env_var->varNum)); ++ } + ++ return NULL; ++} + -+void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl) ++static inline struct env_variable* get_var_by_name(char *var) +{ -+ u32 reset_status; ++ struct env_variable *env_var = (struct env_variable *)_prom_envp; ++ volatile unsigned char nr; ++ int i; + -+ /* read current reset register */ -+ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status); ++ env_var++; /* skip signature */ + -+ if (reset_ctrl == OUT_OF_RESET) -+ { -+ /* bring module out of reset */ -+ reset_status |= (1 << reset_module); -+ } -+ else -+ { -+ /* put module in reset */ -+ reset_status &= (~(1 << reset_module)); -+ } ++ nr = readb(&(env_var->varNum)); ++ i = 0; + -+ /* write to the reset register */ -+ REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status); ++ while (i < max_env_entry && nr != 0xFF) { ++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) { ++ if (strcmp(var, env_var->data) == 0) ++ return env_var; ++ } ++ i++; ++ env_var = get_next_block(env_var); ++ nr = readb(&(env_var->varNum)); ++ } ++ return NULL; +} + -+ -+TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module) ++static inline struct env_variable* get_var(char *var) +{ -+ u32 reset_status; ++ int index = var_to_idx(var); + -+ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status); -+ return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET ); -+} ++ if (index) ++ return get_var_by_number(index); ++ else ++ return get_var_by_name(var); + -+void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode) -+{ -+ REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode); ++ return NULL; +} + -+#define TNETD73XX_RST_CTRL_RSR_MASK 0x3 -+ -+TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status() ++static inline char *get_value(struct env_variable* env_var) +{ -+ u32 sys_reset_status; -+ -+ REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status); -+ -+ return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) ); -+} ++ unsigned char *name; ++ unsigned char *value; ++ unsigned short chksum; ++ int i; + ++ chksum = env_var->varNum + env_var->ctrl + env_var->numCells; + -+/***************************************************************************** -+ * Power Control Module -+ *****************************************************************************/ -+#define TNETD73XX_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */ -+#define TNETD73XX_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */ ++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) { ++ name = env_var->data; ++ value = env_var->data + strlen(name) + 1; + ++ for(i = 0; i < strlen(name); i++) ++ chksum += name[i]; ++ } else ++ value = env_var->data; + -+void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl) -+{ -+ u32 power_status; ++ for (i = 0; i < strlen(value); i++) ++ chksum += value[i]; + -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); ++ chksum += env_var->chksum; ++ chksum = ~(chksum); + -+ if (power_ctrl == POWER_CTRL_POWER_DOWN) -+ { -+ /* power down the module */ -+ power_status |= (1 << power_module); -+ } -+ else -+ { -+ /* power on the module */ -+ power_status &= (~(1 << power_module)); ++ if(chksum != 0) { ++ return NULL; + } + -+ /* write to the reset register */ -+ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status); ++ return value; +} + -+TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module) ++struct psbl_rec { ++ unsigned int psbl_size; ++ unsigned int env_base; ++ unsigned int env_size; ++ unsigned int ffs_base; ++ unsigned int ffs_size; ++}; ++ ++char *prom_psp_getenv(char *envname) +{ -+ u32 power_status; ++ struct env_variable* env_var; ++ char *value; + -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); ++ if (strcmp("bootloader", envname) == 0) ++ return "PSPBoot"; + -+ return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP ); -+} ++ if (!(env_var = get_var(envname))) ++ return NULL; + -+void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode) -+{ -+ u32 power_status; ++ value = get_value(env_var); + -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); ++ return value; ++} +diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c +--- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/reset.c 2005-08-12 19:32:05.139225208 +0200 +@@ -0,0 +1,56 @@ ++/* ++ * Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ * Reset the MIPS boards. ++ * ++ */ ++#include + -+ power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK; -+ power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT); ++#include ++#include + -+ /* write to power down control register */ -+ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status); -+} ++static void ar7_machine_restart(char *command); ++static void ar7_machine_halt(void); ++static void ar7_machine_power_off(void); + -+TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode() ++static void ar7_machine_restart(char *command) +{ -+ u32 power_status; ++ volatile unsigned int *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4)); + -+ /* read current power down control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); ++ *softres_reg = 1; ++} + -+ power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK); -+ power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT); ++static void ar7_machine_halt(void) ++{ + -+ return ( (TNETD73XX_SYS_POWER_MODE_T) power_status ); +} + ++static void ar7_machine_power_off(void) ++{ + -+/***************************************************************************** -+ * Wakeup Control -+ *****************************************************************************/ -+ -+#define TNETD73XX_WAKEUP_POLARITY_BIT 16 ++} + -+void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int, -+ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl, -+ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity) ++void ar7_reboot_setup(void) +{ -+ u32 wakeup_status; ++ _machine_restart = ar7_machine_restart; ++ _machine_halt = ar7_machine_halt; ++ _machine_power_off = ar7_machine_power_off; ++} +diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c +--- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/setup.c 2005-08-12 19:32:05.139225208 +0200 +@@ -0,0 +1,120 @@ ++/* ++ * Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ */ ++#include ++#include ++#include ++#include ++#include + -+ /* read the wakeup control register */ -+ REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status); ++#include ++#include ++#include ++#include ++#include + -+ /* enable/disable */ -+ if (wakeup_ctrl == WAKEUP_ENABLED) -+ { -+ /* enable wakeup */ -+ wakeup_status |= wakeup_int; -+ } -+ else -+ { -+ /* disable wakeup */ -+ wakeup_status &= (~wakeup_int); -+ } ++#include ++#include ++#include + -+ /* set polarity */ -+ if (wakeup_polarity == WAKEUP_ACTIVE_LOW) -+ { -+ wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT); -+ } -+ else -+ { -+ wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT); -+ } ++#ifdef CONFIG_KGDB ++extern void rs_kgdb_hook(int); ++int remote_debug = 0; ++#endif + -+ /* write the wakeup control register */ -+ REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status); -+} ++extern struct rtc_ops no_rtc_ops; + ++extern void ar7_reboot_setup(void); + -+/***************************************************************************** -+ * FSER Control -+ *****************************************************************************/ ++extern void ar7_time_init(void); ++extern void ar7_timer_setup(struct irqaction *irq); + -+void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode) ++const char *get_system_type(void) +{ -+ REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode); ++ return "Texas Instruments AR7"; +} + -+/***************************************************************************** -+ * Clock Control -+ *****************************************************************************/ ++void __init ar7_setup(void) ++{ ++#ifdef CONFIG_KGDB ++ int rs_putDebugChar(char); ++ char rs_getDebugChar(void); ++ extern int (*generic_putDebugChar)(char); ++ extern char (*generic_getDebugChar)(void); ++#endif ++ char *argptr; ++#ifdef CONFIG_SERIAL_CONSOLE ++ argptr = prom_getcmdline(); ++ if ((argptr = strstr(argptr, "console=")) == NULL) { ++ char console[20]; ++ char *s; ++ int i = 0; ++ ++ s = prom_getenv("modetty0"); ++ strcpy(console, "38400"); ++ ++ if (s != NULL) { ++ while (s[i] >= '0' && s[i] <= '9') ++ i++; ++ ++ if (i > 0) { ++ strncpy(console, s, i); ++ console[i] = 0; ++ } ++ } ++ ++ argptr = prom_getcmdline(); ++ strcat(argptr, " console=ttyS0,"); ++ strcat(argptr, console); ++ } ++#endif + -+#define MIN(x,y) ( ((x) < (y)) ? (x) : (y) ) -+#define MAX(x,y) ( ((x) > (y)) ? (x) : (y) ) -+#define ABS(x) ( ((signed)(x) > 0) ? (x) : (-(x)) ) -+#define CEIL(x,y) ( ((x) + (y) / 2) / (y) ) ++#ifdef CONFIG_KGDB ++ argptr = prom_getcmdline(); ++ if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { ++ int line; ++ argptr += strlen("kgdb=ttyS"); ++ if (*argptr != '0' && *argptr != '1') ++ printk("KGDB: Uknown serial line /dev/ttyS%c, " ++ "falling back to /dev/ttyS1\n", *argptr); ++ line = *argptr == '0' ? 0 : 1; ++ printk("KGDB: Using serial line /dev/ttyS%d for session\n", ++ line ? 1 : 0); + -+#define CLKC_CLKCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x))) -+#define CLKC_CLKPLLCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x))) ++ rs_kgdb_hook(line); ++ generic_putDebugChar = rs_putDebugChar; ++ generic_getDebugChar = rs_getDebugChar; + -+#define CLKC_PRE_DIVIDER 0x0000001F -+#define CLKC_POST_DIVIDER 0x001F0000 ++ prom_printf("KGDB: Using serial line /dev/ttyS%d for session, " ++ "please connect your debugger\n", line ? 1 : 0); + -+#define CLKC_PLL_STATUS 0x1 -+#define CLKC_PLL_FACTOR 0x0000F000 ++ remote_debug = 1; ++ /* Breakpoints are in init_IRQ() */ ++ } ++#endif + -+#define BOOTCR_PLL_BYPASS (1 << 5) -+#define BOOTCR_MIPS_ASYNC_MODE (1 << 25) ++ argptr = prom_getcmdline(); ++ if ((argptr = strstr(argptr, "nofpu")) != NULL) ++ cpu_data[0].options &= ~MIPS_CPU_FPU; + -+#define MIPS_PLL_SELECT 0x00030000 -+#define SYSTEM_PLL_SELECT 0x0000C000 -+#define USB_PLL_SELECT 0x000C0000 -+#define ADSLSS_PLL_SELECT 0x00C00000 ++ rtc_ops = &no_rtc_ops; + -+#define MIPS_AFECLKI_SELECT 0x00000000 -+#define MIPS_REFCLKI_SELECT 0x00010000 -+#define MIPS_XTAL3IN_SELECT 0x00020000 ++ ar7_reboot_setup(); + -+#define SYSTEM_AFECLKI_SELECT 0x00000000 -+#define SYSTEM_REFCLKI_SELECT 0x00004000 -+#define SYSTEM_XTAL3IN_SELECT 0x00008000 -+#define SYSTEM_MIPSPLL_SELECT 0x0000C000 ++ board_time_init = ar7_time_init; ++ board_timer_setup = ar7_timer_setup; ++} +diff -urN linux.old/arch/mips/ar7/time.c linux.dev/arch/mips/ar7/time.c +--- linux.old/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/time.c 2005-08-12 23:34:00.272589528 +0200 +@@ -0,0 +1,124 @@ ++/* ++ * Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ * Setting up the clock on the MIPS boards. ++ * ++ */ + -+#define USB_SYSPLL_SELECT 0x00000000 -+#define USB_REFCLKI_SELECT 0x00040000 -+#define USB_XTAL3IN_SELECT 0x00080000 -+#define USB_MIPSPLL_SELECT 0x000C0000 ++#include ++#include ++#include ++#include ++#include ++#include + -+#define ADSLSS_AFECLKI_SELECT 0x00000000 -+#define ADSLSS_REFCLKI_SELECT 0x00400000 -+#define ADSLSS_XTAL3IN_SELECT 0x00800000 -+#define ADSLSS_MIPSPLL_SELECT 0x00C00000 ++#include ++#include ++#include ++#include + -+#define SYS_MAX CLK_MHZ(150) -+#define SYS_MIN CLK_MHZ(1) ++#include ++#include ++#include + -+#define MIPS_SYNC_MAX SYS_MAX -+#define MIPS_ASYNC_MAX CLK_MHZ(160) -+#define MIPS_MIN CLK_MHZ(1) ++#include ++#include + -+#define USB_MAX CLK_MHZ(100) -+#define USB_MIN CLK_MHZ(1) ++extern asmlinkage void mipsIRQ(void); + -+#define ADSL_MAX CLK_MHZ(180) -+#define ADSL_MIN CLK_MHZ(1) ++static unsigned long r4k_offset; /* Amount to increment compare reg each time */ ++static unsigned long r4k_cur; /* What counter should be at next timer irq */ + -+#define PLL_MUL_MAXFACTOR 15 -+#define MAX_DIV_VALUE 32 -+#define MIN_DIV_VALUE 1 ++#define MIPS_CPU_TIMER_IRQ 7 ++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) + -+#define MIN_PLL_INP_FREQ CLK_MHZ(8) -+#define MAX_PLL_INP_FREQ CLK_MHZ(100) ++static inline void ack_r4ktimer(unsigned long newval) ++{ ++ write_c0_compare(newval); ++} + -+#define DIVIDER_LOCK_TIME 10100 -+#define PLL_LOCK_TIME 10100 * 75 ++void ar7_timer_interrupt(struct pt_regs *regs) ++{ ++ int cpu = smp_processor_id(); + ++ irq_enter(cpu, MIPS_CPU_TIMER_IRQ); + ++ if (r4k_offset == 0) ++ goto null; + -+ /**************************************************************************** -+ * DATA PURPOSE: PRIVATE Variables -+ **************************************************************************/ -+ static u32 *clk_src[4]; -+ static u32 mips_pll_out; -+ static u32 sys_pll_out; -+ static u32 afeclk_inp; -+ static u32 refclk_inp; -+ static u32 xtal_inp; -+ static u32 present_min; -+ static u32 present_max; ++ do { ++ kstat.irqs[cpu][MIPS_CPU_TIMER_IRQ]++; ++ do_timer(regs); ++ r4k_cur += r4k_offset; ++ ack_r4ktimer(r4k_cur); + -+ /* Forward References */ -+ static u32 find_gcd(u32 min, u32 max); -+ static u32 compute_prediv( u32 divider, u32 min, u32 max); -+ static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider); -+ static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id); -+ static void find_approx(u32 *,u32 *,u32); ++ } while (((unsigned long)read_c0_count() ++ - r4k_cur) < 0x7fffffff); + -+ /**************************************************************************** -+ * FUNCTION: tnetd73xx_clkc_init -+ **************************************************************************** -+ * Description: The routine initializes the internal variables depending on -+ * on the sources selected for different clocks. -+ ***************************************************************************/ -+void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in) -+{ ++ irq_exit(cpu, MIPS_CPU_TIMER_IRQ); + -+ u32 choice; ++ if (softirq_pending(cpu)) ++ do_softirq(); + -+ afeclk_inp = afeclk; -+ refclk_inp = refclk; -+ xtal_inp = xtal3in; ++ return; + -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT; -+ switch(choice) -+ { -+ case MIPS_AFECLKI_SELECT: -+ clk_src[CLKC_MIPS] = &afeclk_inp; -+ break; ++null: ++ ack_r4ktimer(0); ++} + -+ case MIPS_REFCLKI_SELECT: -+ clk_src[CLKC_MIPS] = &refclk_inp; -+ break; ++/* ++ * Figure out the r4k offset, the amount to increment the compare ++ * register for each time tick. ++ */ ++static unsigned long __init cal_r4koff(void) ++{ ++ return ((CONFIG_AR7_CPU*500000)/HZ); ++} + -+ case MIPS_XTAL3IN_SELECT: -+ clk_src[CLKC_MIPS] = &xtal_inp; -+ break; ++void __init ar7_time_init(void) ++{ ++ unsigned long flags; ++ unsigned int est_freq; + -+ default : -+ clk_src[CLKC_MIPS] = 0; ++ set_except_vector(0, mipsIRQ); ++ write_c0_count(0); + -+ } ++ printk("calculating r4koff... "); ++ r4k_offset = cal_r4koff(); ++ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); + -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT; -+ switch(choice) -+ { -+ case SYSTEM_AFECLKI_SELECT: -+ clk_src[CLKC_SYS] = &afeclk_inp; -+ break; ++ est_freq = 2*r4k_offset*HZ; ++ est_freq += 5000; /* round */ ++ est_freq -= est_freq%10000; ++ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, ++ (est_freq%1000000)*100/1000000); ++} + -+ case SYSTEM_REFCLKI_SELECT: -+ clk_src[CLKC_SYS] = &refclk_inp; -+ break; ++void __init ar7_timer_setup(struct irqaction *irq) ++{ ++ /* we are using the cpu counter for timer interrupts */ ++ irq->handler = no_action; /* we use our own handler */ ++ setup_irq(MIPS_CPU_TIMER_IRQ, irq); + -+ case SYSTEM_XTAL3IN_SELECT: -+ clk_src[CLKC_SYS] = &xtal_inp; -+ break; ++ r4k_cur = (read_c0_count() + r4k_offset); ++ write_c0_compare(r4k_cur); ++ set_c0_status(ALLINTS); ++} +diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c +--- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-08-12 19:32:05.140225056 +0200 +@@ -0,0 +1,924 @@ ++/****************************************************************************** ++ * FILE PURPOSE: TNETD73xx Misc modules API Source ++ ****************************************************************************** ++ * FILE NAME: tnetd73xx_misc.c ++ * ++ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO ++ * FSER Modules API ++ * As per TNETD73xx specifications ++ * ++ * REVISION HISTORY: ++ * 27 Nov 02 - Sharath Kumar PSP TII ++ * 14 Feb 03 - Anant Gole PSP TII ++ * ++ * (C) Copyright 2002, Texas Instruments, Inc ++ *******************************************************************************/ + -+ case SYSTEM_MIPSPLL_SELECT: -+ clk_src[CLKC_SYS] = &mips_pll_out; -+ break; ++#define LITTLE_ENDIAN ++#define _LINK_KSEG0_ + -+ default : -+ clk_src[CLKC_SYS] = 0; ++#include ++#include ++#include + -+ } ++/* TNETD73XX Revision */ ++u32 tnetd73xx_get_revision(void) ++{ ++ /* Read Chip revision register - This register is from GPIO module */ ++ return ( (u32) REG32_DATA(TNETD73XX_CVR)); ++} + ++/***************************************************************************** ++ * Reset Control Module ++ *****************************************************************************/ + -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT; -+ switch(choice) -+ { -+ case ADSLSS_AFECLKI_SELECT: -+ clk_src[CLKC_ADSLSS] = &afeclk_inp; -+ break; + -+ case ADSLSS_REFCLKI_SELECT: -+ clk_src[CLKC_ADSLSS] = &refclk_inp; -+ break; ++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module, TNETD73XX_RESET_CTRL_T reset_ctrl) ++{ ++ u32 reset_status; + -+ case ADSLSS_XTAL3IN_SELECT: -+ clk_src[CLKC_ADSLSS] = &xtal_inp; -+ break; ++ /* read current reset register */ ++ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status); + -+ case ADSLSS_MIPSPLL_SELECT: -+ clk_src[CLKC_ADSLSS] = &mips_pll_out; -+ break; ++ if (reset_ctrl == OUT_OF_RESET) ++ { ++ /* bring module out of reset */ ++ reset_status |= (1 << reset_module); ++ } ++ else ++ { ++ /* put module in reset */ ++ reset_status &= (~(1 << reset_module)); ++ } + -+ default : -+ clk_src[CLKC_ADSLSS] = 0; ++ /* write to the reset register */ ++ REG32_WRITE(TNETD73XX_RST_CTRL_PRCR, reset_status); ++} + -+ } + ++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status (TNETD73XX_RESET_MODULE_T reset_module) ++{ ++ u32 reset_status; + -+ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT; -+ switch(choice) -+ { -+ case USB_SYSPLL_SELECT: -+ clk_src[CLKC_USB] = &sys_pll_out ; -+ break; ++ REG32_READ(TNETD73XX_RST_CTRL_PRCR, reset_status); ++ return ( (reset_status & (1 << reset_module)) ? OUT_OF_RESET : IN_RESET ); ++} + -+ case USB_REFCLKI_SELECT: -+ clk_src[CLKC_USB] = &refclk_inp; -+ break; ++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode) ++{ ++ REG32_WRITE(TNETD73XX_RST_CTRL_SWRCR, mode); ++} + -+ case USB_XTAL3IN_SELECT: -+ clk_src[CLKC_USB] = &xtal_inp; -+ break; ++#define TNETD73XX_RST_CTRL_RSR_MASK 0x3 + -+ case USB_MIPSPLL_SELECT: -+ clk_src[CLKC_USB] = &mips_pll_out; -+ break; ++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status() ++{ ++ u32 sys_reset_status; + -+ default : -+ clk_src[CLKC_USB] = 0; ++ REG32_READ(TNETD73XX_RST_CTRL_RSR, sys_reset_status); + -+ } ++ return ( (TNETD73XX_SYS_RESET_STATUS_T) (sys_reset_status & TNETD73XX_RST_CTRL_RSR_MASK) ); +} + + ++/***************************************************************************** ++ * Power Control Module ++ *****************************************************************************/ ++#define TNETD73XX_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */ ++#define TNETD73XX_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */ + -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_clkc_set_freq -+ **************************************************************************** -+ * Description: The above routine is called to set the output_frequency of the -+ * selected clock(using clk_id) to the required value given -+ * by the variable output_freq. -+ ***************************************************************************/ -+TNETD73XX_ERR tnetd73xx_clkc_set_freq -+( -+ TNETD73XX_CLKC_ID_T clk_id, -+ u32 output_freq -+ ) ++ ++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl) +{ -+ u32 base_freq; -+ u32 multiplier; -+ u32 divider; -+ u32 min_prediv; -+ u32 max_prediv; -+ u32 prediv; -+ u32 postdiv; -+ u32 temp; ++ u32 power_status; + -+ /* check if PLLs are bypassed*/ -+ if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS) ++ /* read current power down control register */ ++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); ++ ++ if (power_ctrl == POWER_CTRL_POWER_DOWN) + { -+ return TNETD73XX_ERR_ERROR; ++ /* power down the module */ ++ power_status |= (1 << power_module); + } -+ -+ /*check if the requested output_frequency is in valid range*/ -+ switch( clk_id ) ++ else + { -+ case CLKC_SYS: -+ if( output_freq < SYS_MIN || output_freq > SYS_MAX) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = SYS_MIN; -+ present_max = SYS_MAX; -+ break; -+ -+ case CLKC_MIPS: -+ if((output_freq < MIPS_MIN) || -+ (output_freq > ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX))) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = MIPS_MIN; -+ present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX; -+ break; ++ /* power on the module */ ++ power_status &= (~(1 << power_module)); ++ } + -+ case CLKC_USB: -+ if( output_freq < USB_MIN || output_freq > USB_MAX) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = USB_MIN; -+ present_max = USB_MAX; -+ break; ++ /* write to the reset register */ ++ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status); ++} + -+ case CLKC_ADSLSS: -+ if( output_freq < ADSL_MIN || output_freq > ADSL_MAX) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } -+ present_min = ADSL_MIN; -+ present_max = ADSL_MAX; -+ break; -+ } ++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module) ++{ ++ u32 power_status; + ++ /* read current power down control register */ ++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); + -+ base_freq = get_base_frequency(clk_id); ++ return ( (power_status & (1 << power_module)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP ); ++} + ++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode) ++{ ++ u32 power_status; + -+ /* check for minimum base frequency value */ -+ if( base_freq < MIN_PLL_INP_FREQ) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } ++ /* read current power down control register */ ++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); + -+ get_val(output_freq, base_freq, &multiplier, ÷r); ++ power_status &= TNETD73XX_GLOBAL_POWER_DOWN_MASK; ++ power_status |= ( power_mode << TNETD73XX_GLOBAL_POWER_DOWN_BIT); + -+ /* check multiplier range */ -+ if( (multiplier > PLL_MUL_MAXFACTOR) || (multiplier <= 0) ) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } ++ /* write to power down control register */ ++ REG32_WRITE(TNETD73XX_POWER_CTRL_PDCR, power_status); ++} + -+ /* check divider value */ -+ if( divider == 0 ) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } ++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode() ++{ ++ u32 power_status; + -+ /*compute minimum and maximum predivider values */ -+ min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1); -+ max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE); ++ /* read current power down control register */ ++ REG32_READ(TNETD73XX_POWER_CTRL_PDCR, power_status); + -+ /*adjust the value of divider so that it not less than minimum predivider value*/ -+ if (divider < min_prediv) -+ { -+ temp = CEIL(min_prediv, divider); -+ if ((temp * multiplier) > PLL_MUL_MAXFACTOR) -+ { -+ return TNETD73XX_ERR_ERROR ; -+ } -+ else -+ { -+ multiplier = temp * multiplier; -+ divider = min_prediv; -+ } ++ power_status &= (~TNETD73XX_GLOBAL_POWER_DOWN_MASK); ++ power_status = ( power_status >> TNETD73XX_GLOBAL_POWER_DOWN_BIT); + -+ } ++ return ( (TNETD73XX_SYS_POWER_MODE_T) power_status ); ++} + -+ /* compute predivider and postdivider values */ -+ prediv = compute_prediv (divider, min_prediv, max_prediv); -+ postdiv = CEIL(divider,prediv); + -+ /*return fail if postdivider value falls out of range */ -+ if(postdiv > MAX_DIV_VALUE) -+ { -+ return TNETD73XX_ERR_ERROR; -+ } ++/***************************************************************************** ++ * Wakeup Control ++ *****************************************************************************/ + ++#define TNETD73XX_WAKEUP_POLARITY_BIT 16 + -+ /*write predivider and postdivider values*/ -+ /* pre-Divider and post-divider are 5 bit N+1 dividers */ -+ REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) ); ++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int, ++ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl, ++ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity) ++{ ++ u32 wakeup_status; + -+ /*wait for divider output to stabilise*/ -+ for(temp =0; temp < DIVIDER_LOCK_TIME; temp++); ++ /* read the wakeup control register */ ++ REG32_READ(TNETD73XX_POWER_CTRL_WKCR, wakeup_status); + -+ /*write to PLL clock register*/ ++ /* enable/disable */ ++ if (wakeup_ctrl == WAKEUP_ENABLED) ++ { ++ /* enable wakeup */ ++ wakeup_status |= wakeup_int; ++ } ++ else ++ { ++ /* disable wakeup */ ++ wakeup_status &= (~wakeup_int); ++ } + -+ if(clk_id == CLKC_SYS) ++ /* set polarity */ ++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW) + { -+ /* but before writing put DRAM to hold mode */ -+ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000; ++ wakeup_status |= (wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT); ++ } ++ else ++ { ++ wakeup_status &= ~(wakeup_int << TNETD73XX_WAKEUP_POLARITY_BIT); + } -+ /*Bring PLL into div mode */ -+ REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4); + -+ /*compute the word to be written to PLLCR -+ *corresponding to multiplier value -+ */ -+ multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e); ++ /* write the wakeup control register */ ++ REG32_WRITE(TNETD73XX_POWER_CTRL_WKCR, wakeup_status); ++} + -+ /* wait till PLL enters div mode */ -+ while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS) -+ /*nothing*/; + -+ REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier); ++/***************************************************************************** ++ * FSER Control ++ *****************************************************************************/ + -+ while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS) -+ /*nothing*/; ++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode) ++{ ++ REG32_WRITE(TNETD73XX_FSER_BASE, fser_mode); ++} + ++/***************************************************************************** ++ * Clock Control ++ *****************************************************************************/ + -+ /*wait for External pll to lock*/ -+ for(temp =0; temp < PLL_LOCK_TIME; temp++); ++#define MIN(x,y) ( ((x) < (y)) ? (x) : (y) ) ++#define MAX(x,y) ( ((x) > (y)) ? (x) : (y) ) ++#define ABS(x) ( ((signed)(x) > 0) ? (x) : (-(x)) ) ++#define CEIL(x,y) ( ((x) + (y) / 2) / (y) ) + -+ if(clk_id == CLKC_SYS) -+ { -+ /* Bring DRAM out of hold */ -+ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000; -+ } ++#define CLKC_CLKCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x20 + (0x20 * (x))) ++#define CLKC_CLKPLLCR(x) (TNETD73XX_CLOCK_CTRL_BASE + 0x30 + (0x20 * (x))) + -+ return TNETD73XX_ERR_OK ; -+} ++#define CLKC_PRE_DIVIDER 0x0000001F ++#define CLKC_POST_DIVIDER 0x001F0000 + -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_clkc_get_freq -+ **************************************************************************** -+ * Description: The above routine is called to get the output_frequency of the -+ * selected clock( clk_id) -+ ***************************************************************************/ -+u32 tnetd73xx_clkc_get_freq -+( -+ TNETD73XX_CLKC_ID_T clk_id -+ ) -+{ ++#define CLKC_PLL_STATUS 0x1 ++#define CLKC_PLL_FACTOR 0x0000F000 + -+ u32 clk_ctrl_register; -+ u32 clk_pll_setting; -+ u32 clk_predivider; -+ u32 clk_postdivider; -+ u16 pll_factor; -+ u32 base_freq; -+ u32 divider; ++#define BOOTCR_PLL_BYPASS (1 << 5) ++#define BOOTCR_MIPS_ASYNC_MODE (1 << 25) + -+ base_freq = get_base_frequency(clk_id); ++#define MIPS_PLL_SELECT 0x00030000 ++#define SYSTEM_PLL_SELECT 0x0000C000 ++#define USB_PLL_SELECT 0x000C0000 ++#define ADSLSS_PLL_SELECT 0x00C00000 + -+ clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id)); ++#define MIPS_AFECLKI_SELECT 0x00000000 ++#define MIPS_REFCLKI_SELECT 0x00010000 ++#define MIPS_XTAL3IN_SELECT 0x00020000 + -+ /* pre-Divider and post-divider are 5 bit N+1 dividers */ -+ clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1; -+ clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1; ++#define SYSTEM_AFECLKI_SELECT 0x00000000 ++#define SYSTEM_REFCLKI_SELECT 0x00004000 ++#define SYSTEM_XTAL3IN_SELECT 0x00008000 ++#define SYSTEM_MIPSPLL_SELECT 0x0000C000 + -+ divider = clk_predivider * clk_postdivider; ++#define USB_SYSPLL_SELECT 0x00000000 ++#define USB_REFCLKI_SELECT 0x00040000 ++#define USB_XTAL3IN_SELECT 0x00080000 ++#define USB_MIPSPLL_SELECT 0x000C0000 + ++#define ADSLSS_AFECLKI_SELECT 0x00000000 ++#define ADSLSS_REFCLKI_SELECT 0x00400000 ++#define ADSLSS_XTAL3IN_SELECT 0x00800000 ++#define ADSLSS_MIPSPLL_SELECT 0x00C00000 + -+ if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)) -+ { -+ return (CEIL(base_freq, divider)); /* PLLs bypassed.*/ -+ } ++#define SYS_MAX CLK_MHZ(150) ++#define SYS_MIN CLK_MHZ(1) + ++#define MIPS_SYNC_MAX SYS_MAX ++#define MIPS_ASYNC_MAX CLK_MHZ(160) ++#define MIPS_MIN CLK_MHZ(1) + -+ else -+ { -+ /* return the current clock speed based upon the PLL setting */ -+ clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id)); ++#define USB_MAX CLK_MHZ(100) ++#define USB_MIN CLK_MHZ(1) + -+ /* Get the PLL multiplication factor */ -+ pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1; ++#define ADSL_MAX CLK_MHZ(180) ++#define ADSL_MIN CLK_MHZ(1) + -+ /* Check if we're in divide mode or multiply mode */ -+ if((clk_pll_setting & 0x1) == 0) -+ { -+ /* We're in divide mode */ -+ if(pll_factor < 0x10) -+ return (CEIL(base_freq >> 1, divider)); -+ else -+ return (CEIL(base_freq >> 2, divider)); -+ } -+ -+ else /* We're in PLL mode */ -+ { -+ /* See if PLLNDIV & PLLDIV are set */ -+ if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2)) -+ { -+ if(clk_pll_setting & 0x1000) -+ { -+ /* clk = base_freq * k/2 */ -+ return(CEIL((base_freq * pll_factor) >> 1, divider)); -+ } -+ else -+ { -+ /* clk = base_freq * (k-1) / 4)*/ -+ return(CEIL((base_freq * (pll_factor - 1)) >>2, divider)); -+ } -+ } -+ else -+ { -+ if(pll_factor < 0x10) -+ { -+ /* clk = base_freq * k */ -+ return(CEIL(base_freq * pll_factor, divider)); -+ } ++#define PLL_MUL_MAXFACTOR 15 ++#define MAX_DIV_VALUE 32 ++#define MIN_DIV_VALUE 1 + -+ else -+ { -+ /* clk = base_freq */ -+ return(CEIL(base_freq, divider)); -+ } -+ } -+ } -+ return(0); /* Should never reach here */ ++#define MIN_PLL_INP_FREQ CLK_MHZ(8) ++#define MAX_PLL_INP_FREQ CLK_MHZ(100) + -+ } ++#define DIVIDER_LOCK_TIME 10100 ++#define PLL_LOCK_TIME 10100 * 75 + -+} + + -+/* local helper functions */ ++ /**************************************************************************** ++ * DATA PURPOSE: PRIVATE Variables ++ **************************************************************************/ ++ static u32 *clk_src[4]; ++ static u32 mips_pll_out; ++ static u32 sys_pll_out; ++ static u32 afeclk_inp; ++ static u32 refclk_inp; ++ static u32 xtal_inp; ++ static u32 present_min; ++ static u32 present_max; + -+/**************************************************************************** -+ * FUNCTION: get_base_frequency -+ **************************************************************************** -+ * Description: The above routine is called to get base frequency of the clocks. -+ ***************************************************************************/ ++ /* Forward References */ ++ static u32 find_gcd(u32 min, u32 max); ++ static u32 compute_prediv( u32 divider, u32 min, u32 max); ++ static void get_val(u32 base_freq, u32 output_freq,u32 *multiplier, u32 *divider); ++ static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id); ++ static void find_approx(u32 *,u32 *,u32); + -+static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id) ++ /**************************************************************************** ++ * FUNCTION: tnetd73xx_clkc_init ++ **************************************************************************** ++ * Description: The routine initializes the internal variables depending on ++ * on the sources selected for different clocks. ++ ***************************************************************************/ ++void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in) +{ -+ /* update the current MIPs PLL output value, if the required -+ * source is MIPS PLL -+ */ -+ if ( clk_src[clk_id] == &mips_pll_out) -+ { -+ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS); -+ } + ++ u32 choice; + -+ /* update the current System PLL output value, if the required -+ * source is system PLL -+ */ -+ if ( clk_src[clk_id] == &sys_pll_out) -+ { -+ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS); -+ } ++ afeclk_inp = afeclk; ++ refclk_inp = refclk; ++ xtal_inp = xtal3in; + -+ return (*clk_src[clk_id]); ++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & MIPS_PLL_SELECT; ++ switch(choice) ++ { ++ case MIPS_AFECLKI_SELECT: ++ clk_src[CLKC_MIPS] = &afeclk_inp; ++ break; + -+} ++ case MIPS_REFCLKI_SELECT: ++ clk_src[CLKC_MIPS] = &refclk_inp; ++ break; + ++ case MIPS_XTAL3IN_SELECT: ++ clk_src[CLKC_MIPS] = &xtal_inp; ++ break; + ++ default : ++ clk_src[CLKC_MIPS] = 0; + -+/**************************************************************************** -+ * FUNCTION: find_gcd -+ **************************************************************************** -+ * Description: The above routine is called to find gcd of 2 numbers. -+ ***************************************************************************/ -+static u32 find_gcd -+( -+ u32 min, -+ u32 max -+ ) -+{ -+ if (max % min == 0) -+ { -+ return min; + } -+ else ++ ++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & SYSTEM_PLL_SELECT; ++ switch(choice) + { -+ return find_gcd(max % min, min); -+ } -+} ++ case SYSTEM_AFECLKI_SELECT: ++ clk_src[CLKC_SYS] = &afeclk_inp; ++ break; + -+/**************************************************************************** -+ * FUNCTION: compute_prediv -+ **************************************************************************** -+ * Description: The above routine is called to compute predivider value -+ ***************************************************************************/ -+static u32 compute_prediv(u32 divider, u32 min, u32 max) -+{ -+ u16 prediv; ++ case SYSTEM_REFCLKI_SELECT: ++ clk_src[CLKC_SYS] = &refclk_inp; ++ break; + -+ /* return the divider itself it it falls within the range of predivider*/ -+ if (min <= divider && divider <= max) -+ { -+ return divider; -+ } ++ case SYSTEM_XTAL3IN_SELECT: ++ clk_src[CLKC_SYS] = &xtal_inp; ++ break; ++ ++ case SYSTEM_MIPSPLL_SELECT: ++ clk_src[CLKC_SYS] = &mips_pll_out; ++ break; ++ ++ default : ++ clk_src[CLKC_SYS] = 0; + -+ /* find a value for prediv such that it is a factor of divider */ -+ for (prediv = max; prediv >= min ; prediv--) -+ { -+ if ( (divider % prediv) == 0 ) -+ { -+ return prediv; -+ } + } + -+ /* No such factor exists, return min as prediv */ -+ return min; -+} + -+/**************************************************************************** -+ * FUNCTION: get_val -+ **************************************************************************** -+ * Description: This routine is called to get values of divider and multiplier. -+ ***************************************************************************/ ++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & ADSLSS_PLL_SELECT; ++ switch(choice) ++ { ++ case ADSLSS_AFECLKI_SELECT: ++ clk_src[CLKC_ADSLSS] = &afeclk_inp; ++ break; + -+static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider) -+{ -+ u32 temp_mul; -+ u32 temp_div; -+ u32 gcd; -+ u32 min_freq; -+ u32 max_freq; ++ case ADSLSS_REFCLKI_SELECT: ++ clk_src[CLKC_ADSLSS] = &refclk_inp; ++ break; + -+ /* find gcd of base_freq, output_freq */ -+ min_freq = (base_freq < output_freq) ? base_freq : output_freq; -+ max_freq = (base_freq > output_freq) ? base_freq : output_freq; -+ gcd = find_gcd(min_freq , max_freq); ++ case ADSLSS_XTAL3IN_SELECT: ++ clk_src[CLKC_ADSLSS] = &xtal_inp; ++ break; + -+ if(gcd == 0) -+ return; /* ERROR */ ++ case ADSLSS_MIPSPLL_SELECT: ++ clk_src[CLKC_ADSLSS] = &mips_pll_out; ++ break; + -+ /* compute values of multiplier and divider */ -+ temp_mul = output_freq / gcd; -+ temp_div = base_freq / gcd; ++ default : ++ clk_src[CLKC_ADSLSS] = 0; + ++ } + -+ /* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */ -+ if( temp_mul > PLL_MUL_MAXFACTOR ) ++ ++ choice = REG32_DATA(TNETD73XX_DCL_BOOTCR) & USB_PLL_SELECT; ++ switch(choice) + { -+ if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR) -+ return; ++ case USB_SYSPLL_SELECT: ++ clk_src[CLKC_USB] = &sys_pll_out ; ++ break; + -+ find_approx(&temp_mul,&temp_div,base_freq); -+ } ++ case USB_REFCLKI_SELECT: ++ clk_src[CLKC_USB] = &refclk_inp; ++ break; + -+ *multiplier = temp_mul; -+ *divider = temp_div; ++ case USB_XTAL3IN_SELECT: ++ clk_src[CLKC_USB] = &xtal_inp; ++ break; ++ ++ case USB_MIPSPLL_SELECT: ++ clk_src[CLKC_USB] = &mips_pll_out; ++ break; ++ ++ default : ++ clk_src[CLKC_USB] = 0; ++ ++ } +} + ++ ++ +/**************************************************************************** -+ * FUNCTION: find_approx ++ * FUNCTION: tnetd73xx_clkc_set_freq + **************************************************************************** -+ * Description: This function gets the approx value of num/denom. ++ * Description: The above routine is called to set the output_frequency of the ++ * selected clock(using clk_id) to the required value given ++ * by the variable output_freq. + ***************************************************************************/ -+ -+static void find_approx(u32 *num,u32 *denom,u32 base_freq) ++TNETD73XX_ERR tnetd73xx_clkc_set_freq ++( ++ TNETD73XX_CLKC_ID_T clk_id, ++ u32 output_freq ++ ) +{ -+ u32 num1; -+ u32 denom1; -+ u32 num2; -+ u32 denom2; -+ int32_t closest; -+ int32_t prev_closest; -+ u32 temp_num; -+ u32 temp_denom; -+ u32 normalize; -+ u32 gcd; -+ u32 output_freq; -+ -+ num1 = *num; -+ denom1 = *denom; -+ -+ prev_closest = 0x7fffffff; /* maximum possible value */ -+ num2 = num1; -+ denom2 = denom1; ++ u32 base_freq; ++ u32 multiplier; ++ u32 divider; ++ u32 min_prediv; ++ u32 max_prediv; ++ u32 prediv; ++ u32 postdiv; ++ u32 temp; + -+ /* start with max */ -+ for(temp_num = 15; temp_num >=1; temp_num--) ++ /* check if PLLs are bypassed*/ ++ if(REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS) + { ++ return TNETD73XX_ERR_ERROR; ++ } + -+ temp_denom = CEIL(temp_num * denom1, num1); -+ output_freq = (temp_num * base_freq) / temp_denom; -+ -+ if(temp_denom < 1) -+ { ++ /*check if the requested output_frequency is in valid range*/ ++ switch( clk_id ) ++ { ++ case CLKC_SYS: ++ if( output_freq < SYS_MIN || output_freq > SYS_MAX) ++ { ++ return TNETD73XX_ERR_ERROR; ++ } ++ present_min = SYS_MIN; ++ present_max = SYS_MAX; + break; -+ } -+ else -+ { -+ normalize = CEIL(num1,temp_num); -+ closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1))) * normalize; -+ if(closest < prev_closest && output_freq > present_min && output_freq ((REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX))) + { -+ prev_closest = closest; -+ num2 = temp_num; -+ denom2 = temp_denom; ++ return TNETD73XX_ERR_ERROR; + } ++ present_min = MIPS_MIN; ++ present_max = (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_MIPS_ASYNC_MODE) ? MIPS_ASYNC_MAX: MIPS_SYNC_MAX; ++ break; + -+ } ++ case CLKC_USB: ++ if( output_freq < USB_MIN || output_freq > USB_MAX) ++ { ++ return TNETD73XX_ERR_ERROR; ++ } ++ present_min = USB_MIN; ++ present_max = USB_MAX; ++ break; + ++ case CLKC_ADSLSS: ++ if( output_freq < ADSL_MIN || output_freq > ADSL_MAX) ++ { ++ return TNETD73XX_ERR_ERROR; ++ } ++ present_min = ADSL_MIN; ++ present_max = ADSL_MAX; ++ break; + } + -+ gcd = find_gcd(num2,denom2); -+ num2 = num2 / gcd; -+ denom2 = denom2 /gcd; + -+ *num = num2; -+ *denom = denom2; -+} ++ base_freq = get_base_frequency(clk_id); + + -+/***************************************************************************** -+ * GPIO Control -+ *****************************************************************************/ ++ /* check for minimum base frequency value */ ++ if( base_freq < MIN_PLL_INP_FREQ) ++ { ++ return TNETD73XX_ERR_ERROR; ++ } + -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_gpio_init -+ ***************************************************************************/ -+void tnetd73xx_gpio_init() -+{ -+ /* Bring module out of reset */ -+ tnetd73xx_reset_ctrl(RESET_MODULE_GPIO, OUT_OF_RESET); -+ REG32_WRITE(TNETD73XX_GPIOENR, 0xFFFFFFFF); -+} ++ get_val(output_freq, base_freq, &multiplier, ÷r); + -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_gpio_ctrl -+ ***************************************************************************/ -+void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin, -+ TNETD73XX_GPIO_PIN_MODE_T pin_mode, -+ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction) -+{ -+ u32 pin_status; -+ REG32_READ(TNETD73XX_GPIOENR, pin_status); -+ if (pin_mode == GPIO_PIN) ++ /* check multiplier range */ ++ if( (multiplier > PLL_MUL_MAXFACTOR) || (multiplier <= 0) ) + { -+ pin_status |= (1 << gpio_pin); -+ REG32_WRITE(TNETD73XX_GPIOENR, pin_status); ++ return TNETD73XX_ERR_ERROR; ++ } + -+ /* Set pin direction */ -+ REG32_READ(TNETD73XX_GPIOPDIRR, pin_status); -+ if (pin_direction == GPIO_INPUT_PIN) ++ /* check divider value */ ++ if( divider == 0 ) ++ { ++ return TNETD73XX_ERR_ERROR; ++ } ++ ++ /*compute minimum and maximum predivider values */ ++ min_prediv = MAX(base_freq / MAX_PLL_INP_FREQ + 1, divider / MAX_DIV_VALUE + 1); ++ max_prediv = MIN(base_freq / MIN_PLL_INP_FREQ, MAX_DIV_VALUE); ++ ++ /*adjust the value of divider so that it not less than minimum predivider value*/ ++ if (divider < min_prediv) ++ { ++ temp = CEIL(min_prediv, divider); ++ if ((temp * multiplier) > PLL_MUL_MAXFACTOR) + { -+ pin_status |= (1 << gpio_pin); ++ return TNETD73XX_ERR_ERROR ; + } -+ else /* GPIO_OUTPUT_PIN */ ++ else + { -+ pin_status &= (~(1 << gpio_pin)); ++ multiplier = temp * multiplier; ++ divider = min_prediv; + } -+ REG32_WRITE(TNETD73XX_GPIOPDIRR, pin_status); ++ + } -+ else /* FUNCTIONAL PIN */ ++ ++ /* compute predivider and postdivider values */ ++ prediv = compute_prediv (divider, min_prediv, max_prediv); ++ postdiv = CEIL(divider,prediv); ++ ++ /*return fail if postdivider value falls out of range */ ++ if(postdiv > MAX_DIV_VALUE) + { -+ pin_status &= (~(1 << gpio_pin)); -+ REG32_WRITE(TNETD73XX_GPIOENR, pin_status); ++ return TNETD73XX_ERR_ERROR; + } + -+} + -+/**************************************************************************** -+ * FUNCTION: tnetd73xx_gpio_out -+ ***************************************************************************/ -+void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value) -+{ -+ u32 pin_value; ++ /*write predivider and postdivider values*/ ++ /* pre-Divider and post-divider are 5 bit N+1 dividers */ ++ REG32_WRITE(CLKC_CLKCR(clk_id), ((postdiv -1) & 0x1F) << 16 | ((prediv -1) & 0x1F) ); + -+ REG32_READ(TNETD73XX_GPIODOUTR, pin_value); -+ if (value == 1) ++ /*wait for divider output to stabilise*/ ++ for(temp =0; temp < DIVIDER_LOCK_TIME; temp++); ++ ++ /*write to PLL clock register*/ ++ ++ if(clk_id == CLKC_SYS) + { -+ pin_value |= (1 << gpio_pin); ++ /* but before writing put DRAM to hold mode */ ++ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) |= 0x80000000; + } -+ else ++ /*Bring PLL into div mode */ ++ REG32_WRITE(CLKC_CLKPLLCR(clk_id), 0x4); ++ ++ /*compute the word to be written to PLLCR ++ *corresponding to multiplier value ++ */ ++ multiplier = (((multiplier - 1) & 0xf) << 12)| ((255 <<3) | 0x0e); ++ ++ /* wait till PLL enters div mode */ ++ while(REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS) ++ /*nothing*/; ++ ++ REG32_WRITE(CLKC_CLKPLLCR(clk_id), multiplier); ++ ++ while(!REG32_DATA(CLKC_CLKPLLCR(clk_id)) & CLKC_PLL_STATUS) ++ /*nothing*/; ++ ++ ++ /*wait for External pll to lock*/ ++ for(temp =0; temp < PLL_LOCK_TIME; temp++); ++ ++ if(clk_id == CLKC_SYS) + { -+ pin_value &= (~(1 << gpio_pin)); ++ /* Bring DRAM out of hold */ ++ REG32_DATA(TNETD73XX_EMIF_SDRAM_CFG) &= ~0x80000000; + } -+ REG32_WRITE(TNETD73XX_GPIODOUTR, pin_value); ++ ++ return TNETD73XX_ERR_OK ; +} + +/**************************************************************************** -+ * FUNCTION: tnetd73xx_gpio_in ++ * FUNCTION: tnetd73xx_clkc_get_freq ++ **************************************************************************** ++ * Description: The above routine is called to get the output_frequency of the ++ * selected clock( clk_id) + ***************************************************************************/ -+int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin) ++u32 tnetd73xx_clkc_get_freq ++( ++ TNETD73XX_CLKC_ID_T clk_id ++ ) +{ -+ u32 pin_value; -+ REG32_READ(TNETD73XX_GPIODINR, pin_value); -+ return ( (pin_value & (1 << gpio_pin)) ? 1 : 0 ); -+} + -diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in ---- linux.old/arch/mips/config-shared.in 2005-07-07 05:38:31.343491864 +0200 -+++ linux.dev/arch/mips/config-shared.in 2005-07-07 04:39:14.424225000 +0200 -@@ -20,6 +20,15 @@ - mainmenu_option next_comment - comment 'Machine selection' - dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL -+dep_bool 'Support for Texas Instruments AR7 (EXPERIMENTAL)' CONFIG_AR7 $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL -+if [ "$CONFIG_AR7" = "y" ]; then -+ choice 'Texas Instruments Reference Platform' \ -+ "AR7DB CONFIG_AR7DB \ -+ AR7RD CONFIG_AR7RD \ -+ AR7WRD CONFIG_AR7WRD" AR7DB -+ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_FREQUENCY 150 -+ hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000 -+fi - dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32 - dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32 -@@ -239,6 +248,11 @@ - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi -+if [ "$CONFIG_AR7" = "y" ]; then -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_SWAP_IO_SPACE y -+ define_bool CONFIG_AR7_PAGING y -+fi - if [ "$CONFIG_CASIO_E55" = "y" ]; then - define_bool CONFIG_IRQ_CPU y - define_bool CONFIG_NONCOHERENT_IO y -@@ -736,6 +750,7 @@ - mainmenu_option next_comment - comment 'General setup' - if [ "$CONFIG_ACER_PICA_61" = "y" -o \ -+ "$CONFIG_AR7" = "y" -o \ - "$CONFIG_CASIO_E55" = "y" -o \ - "$CONFIG_DDB5074" = "y" -o \ - "$CONFIG_DDB5476" = "y" -o \ -@@ -797,6 +812,7 @@ - bool 'Networking support' CONFIG_NET ++ u32 clk_ctrl_register; ++ u32 clk_pll_setting; ++ u32 clk_predivider; ++ u32 clk_postdivider; ++ u16 pll_factor; ++ u32 base_freq; ++ u32 divider; ++ ++ base_freq = get_base_frequency(clk_id); ++ ++ clk_ctrl_register = REG32_DATA(CLKC_CLKCR(clk_id)); ++ ++ /* pre-Divider and post-divider are 5 bit N+1 dividers */ ++ clk_predivider = (CLKC_PRE_DIVIDER & clk_ctrl_register) + 1; ++ clk_postdivider = ((CLKC_POST_DIVIDER & clk_ctrl_register) >> 16) + 1; ++ ++ divider = clk_predivider * clk_postdivider; ++ ++ ++ if( (REG32_DATA(TNETD73XX_DCL_BOOTCR) & BOOTCR_PLL_BYPASS)) ++ { ++ return (CEIL(base_freq, divider)); /* PLLs bypassed.*/ ++ } ++ ++ ++ else ++ { ++ /* return the current clock speed based upon the PLL setting */ ++ clk_pll_setting = REG32_DATA(CLKC_CLKPLLCR(clk_id)); ++ ++ /* Get the PLL multiplication factor */ ++ pll_factor = ((clk_pll_setting & CLKC_PLL_FACTOR) >> 12) + 1; ++ ++ /* Check if we're in divide mode or multiply mode */ ++ if((clk_pll_setting & 0x1) == 0) ++ { ++ /* We're in divide mode */ ++ if(pll_factor < 0x10) ++ return (CEIL(base_freq >> 1, divider)); ++ else ++ return (CEIL(base_freq >> 2, divider)); ++ } ++ ++ else /* We're in PLL mode */ ++ { ++ /* See if PLLNDIV & PLLDIV are set */ ++ if((clk_pll_setting & 0x0800) && (clk_pll_setting & 0x2)) ++ { ++ if(clk_pll_setting & 0x1000) ++ { ++ /* clk = base_freq * k/2 */ ++ return(CEIL((base_freq * pll_factor) >> 1, divider)); ++ } ++ else ++ { ++ /* clk = base_freq * (k-1) / 4)*/ ++ return(CEIL((base_freq * (pll_factor - 1)) >>2, divider)); ++ } ++ } ++ else ++ { ++ if(pll_factor < 0x10) ++ { ++ /* clk = base_freq * k */ ++ return(CEIL(base_freq * pll_factor, divider)); ++ } ++ ++ else ++ { ++ /* clk = base_freq */ ++ return(CEIL(base_freq, divider)); ++ } ++ } ++ } ++ return(0); /* Should never reach here */ ++ ++ } ++ ++} ++ ++ ++/* local helper functions */ ++ ++/**************************************************************************** ++ * FUNCTION: get_base_frequency ++ **************************************************************************** ++ * Description: The above routine is called to get base frequency of the clocks. ++ ***************************************************************************/ ++ ++static u32 get_base_frequency(TNETD73XX_CLKC_ID_T clk_id) ++{ ++ /* update the current MIPs PLL output value, if the required ++ * source is MIPS PLL ++ */ ++ if ( clk_src[clk_id] == &mips_pll_out) ++ { ++ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_MIPS); ++ } ++ ++ ++ /* update the current System PLL output value, if the required ++ * source is system PLL ++ */ ++ if ( clk_src[clk_id] == &sys_pll_out) ++ { ++ *clk_src[clk_id] = tnetd73xx_clkc_get_freq(CLKC_SYS); ++ } ++ ++ return (*clk_src[clk_id]); ++ ++} ++ ++ ++ ++/**************************************************************************** ++ * FUNCTION: find_gcd ++ **************************************************************************** ++ * Description: The above routine is called to find gcd of 2 numbers. ++ ***************************************************************************/ ++static u32 find_gcd ++( ++ u32 min, ++ u32 max ++ ) ++{ ++ if (max % min == 0) ++ { ++ return min; ++ } ++ else ++ { ++ return find_gcd(max % min, min); ++ } ++} ++ ++/**************************************************************************** ++ * FUNCTION: compute_prediv ++ **************************************************************************** ++ * Description: The above routine is called to compute predivider value ++ ***************************************************************************/ ++static u32 compute_prediv(u32 divider, u32 min, u32 max) ++{ ++ u16 prediv; ++ ++ /* return the divider itself it it falls within the range of predivider*/ ++ if (min <= divider && divider <= max) ++ { ++ return divider; ++ } ++ ++ /* find a value for prediv such that it is a factor of divider */ ++ for (prediv = max; prediv >= min ; prediv--) ++ { ++ if ( (divider % prediv) == 0 ) ++ { ++ return prediv; ++ } ++ } ++ ++ /* No such factor exists, return min as prediv */ ++ return min; ++} ++ ++/**************************************************************************** ++ * FUNCTION: get_val ++ **************************************************************************** ++ * Description: This routine is called to get values of divider and multiplier. ++ ***************************************************************************/ ++ ++static void get_val(u32 output_freq, u32 base_freq,u32 *multiplier, u32 *divider) ++{ ++ u32 temp_mul; ++ u32 temp_div; ++ u32 gcd; ++ u32 min_freq; ++ u32 max_freq; ++ ++ /* find gcd of base_freq, output_freq */ ++ min_freq = (base_freq < output_freq) ? base_freq : output_freq; ++ max_freq = (base_freq > output_freq) ? base_freq : output_freq; ++ gcd = find_gcd(min_freq , max_freq); ++ ++ if(gcd == 0) ++ return; /* ERROR */ ++ ++ /* compute values of multiplier and divider */ ++ temp_mul = output_freq / gcd; ++ temp_div = base_freq / gcd; ++ ++ ++ /* set multiplier such that 1 <= multiplier <= PLL_MUL_MAXFACTOR */ ++ if( temp_mul > PLL_MUL_MAXFACTOR ) ++ { ++ if((temp_mul / temp_div) > PLL_MUL_MAXFACTOR) ++ return; ++ ++ find_approx(&temp_mul,&temp_div,base_freq); ++ } ++ ++ *multiplier = temp_mul; ++ *divider = temp_div; ++} ++ ++/**************************************************************************** ++ * FUNCTION: find_approx ++ **************************************************************************** ++ * Description: This function gets the approx value of num/denom. ++ ***************************************************************************/ ++ ++static void find_approx(u32 *num,u32 *denom,u32 base_freq) ++{ ++ u32 num1; ++ u32 denom1; ++ u32 num2; ++ u32 denom2; ++ int32_t closest; ++ int32_t prev_closest; ++ u32 temp_num; ++ u32 temp_denom; ++ u32 normalize; ++ u32 gcd; ++ u32 output_freq; ++ ++ num1 = *num; ++ denom1 = *denom; ++ ++ prev_closest = 0x7fffffff; /* maximum possible value */ ++ num2 = num1; ++ denom2 = denom1; ++ ++ /* start with max */ ++ for(temp_num = 15; temp_num >=1; temp_num--) ++ { ++ ++ temp_denom = CEIL(temp_num * denom1, num1); ++ output_freq = (temp_num * base_freq) / temp_denom; ++ ++ if(temp_denom < 1) ++ { ++ break; ++ } ++ else ++ { ++ normalize = CEIL(num1,temp_num); ++ closest = (ABS((num1 * (temp_denom) ) - (temp_num * denom1))) * normalize; ++ if(closest < prev_closest && output_freq > present_min && output_freq - #include - -+#ifdef CONFIG_AR7 -+#include -+#endif -+ - extern asmlinkage void handle_mod(void); - extern asmlinkage void handle_tlbl(void); - extern asmlinkage void handle_tlbs(void); -@@ -869,9 +873,15 @@ - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -+#ifdef CONFIG_AR7 -+ *(volatile u32 *)(AVALANCHE_VECS_KSEG0+0x200) = 0x08000000 | -+ (0x03ffffff & (handler >> 2)); -+ flush_icache_range(AVALANCHE_VECS_KSEG0+0x200, AVALANCHE_VECS_KSEG0 + 0x204); -+#else - *(volatile u32 *)(KSEG0+0x200) = 0x08000000 | - (0x03ffffff & (handler >> 2)); - flush_icache_range(KSEG0+0x200, KSEG0 + 0x204); -+#endif - } - return (void *)old_handler; - } -@@ -920,14 +930,46 @@ - void __init trap_init(void) - { - extern char except_vec1_generic; -+ extern char except_vec2_generic; - extern char except_vec3_generic, except_vec3_r4000; - extern char except_vec_ejtag_debug; - extern char except_vec4; - unsigned long i; - -+#ifdef CONFIG_AR7 -+ extern char jump_tlb_miss, jump_tlb_miss_unused; -+ extern char jump_cache_error,jump_general_exception; -+ extern char jump_dedicated_interrupt; -+ clear_c0_status(ST0_BEV); -+#endif -+ - /* Copy the generic exception handler code to it's final destination. */ - memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); -+ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80); -+ memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80); - -+ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80); -+ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80); -+ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80); -+ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80); -+ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80); -+ -+#ifdef CONFIG_AR7 -+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x80), &except_vec1_generic, 0x80); -+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x100), &except_vec2_generic, 0x80); -+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x180), &except_vec3_generic, 0x80); -+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x200); -+ -+ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80); -+ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80); -+ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80); -+ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80); -+ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80); -+#else -+ memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); -+#endif -+ flush_icache_range(KSEG0 + 0x80, KSEG0 + 0x200); -+ - /* - * Setup default vectors - */ -@@ -951,8 +993,12 @@ - * Some MIPS CPUs have a dedicated interrupt vector which reduces the - * interrupt processing overhead. Use it where available. - */ -+#ifdef CONFIG_AR7 -+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x200), &except_vec4, 8); -+#else - if (cpu_has_divec) - memcpy((void *)(KSEG0 + 0x200), &except_vec4, 8); -+#endif - - /* - * Some CPUs can enable/disable for cache parity detection, but does -@@ -991,12 +1037,17 @@ - if (cpu_has_mcheck) - set_except_vector(24, handle_mcheck); - -+memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80); -+#ifdef CONFIG_AR7 -+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x180), &except_vec3_generic, 0x80); -+#else - if (cpu_has_vce) - memcpy((void *)(KSEG0 + 0x180), &except_vec3_r4000, 0x80); - else if (cpu_has_4kex) - memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80); - else - memcpy((void *)(KSEG0 + 0x080), &except_vec3_generic, 0x80); -+#endif - - if (current_cpu_data.cputype == CPU_R6000 || - current_cpu_data.cputype == CPU_R6000A) { -@@ -1023,7 +1074,11 @@ - if (board_nmi_handler_setup) - board_nmi_handler_setup(); - -+#ifdef CONFIG_AR7 -+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x200); -+#else - flush_icache_range(KSEG0, KSEG0 + 0x400); -+#endif - - per_cpu_trap_init(); - } -diff -urN linux.old/arch/mips/lib/promlib.c linux.dev/arch/mips/lib/promlib.c ---- linux.old/arch/mips/lib/promlib.c 2005-07-07 05:38:31.345491560 +0200 -+++ linux.dev/arch/mips/lib/promlib.c 2005-07-07 04:39:14.426225000 +0200 -@@ -1,3 +1,4 @@ -+#ifndef CONFIG_AR7 - #include - #include - -@@ -22,3 +23,4 @@ - } - va_end(args); - } -+#endif -diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile ---- linux.old/arch/mips/Makefile 2005-07-07 05:38:31.320495360 +0200 -+++ linux.dev/arch/mips/Makefile 2005-07-07 04:39:14.510212000 +0200 -@@ -369,6 +369,16 @@ - endif - - # -+# Texas Instruments AR7 -+# -+ -+ifdef CONFIG_AR7 -+LIBS += arch/mips/ar7/ar7.o arch/mips/ar7/avalanche/avalanche.o -+SUBDIRS += arch/mips/ar7 arch/mips/ar7/avalanche -+LOADADDR += 0x94020000 -+endif -+ -+# - # DECstation family - # - ifdef CONFIG_DECSTATION -diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c ---- linux.old/arch/mips/mm/init.c 2005-07-07 05:38:31.345491560 +0200 -+++ linux.dev/arch/mips/mm/init.c 2005-07-07 04:39:14.426225000 +0200 -@@ -40,8 +40,10 @@ - - mmu_gather_t mmu_gathers[NR_CPUS]; - unsigned long highstart_pfn, highend_pfn; -+#ifndef CONFIG_AR7_PAGING - static unsigned long totalram_pages; - static unsigned long totalhigh_pages; -+#endif - - void pgd_init(unsigned long page) - { -@@ -235,6 +237,7 @@ - #endif - } - -+#ifndef CONFIG_AR7_PAGING - void __init paging_init(void) - { - unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; -@@ -272,6 +275,7 @@ - - free_area_init(zones_size); - } -+#endif - - #define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) - #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -@@ -298,6 +302,7 @@ - return 0; - } - -+#ifndef CONFIG_AR7_PAGING - void __init mem_init(void) - { - unsigned long codesize, reservedpages, datasize, initsize; -@@ -359,6 +364,7 @@ - initsize >> 10, - (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); - } -+#endif - - #ifdef CONFIG_BLK_DEV_INITRD - void free_initrd_mem(unsigned long start, unsigned long end) -@@ -376,6 +382,7 @@ - } - #endif - -+#ifndef CONFIG_AR7_PAGING - extern char __init_begin, __init_end; - extern void prom_free_prom_memory(void) __init; - -@@ -383,7 +390,9 @@ - { - unsigned long addr; - -+#ifndef CONFIG_AR7 - prom_free_prom_memory (); -+#endif - - addr = (unsigned long) &__init_begin; - while (addr < (unsigned long) &__init_end) { -@@ -409,3 +418,4 @@ - - return; - } -+#endif -diff -urN linux.old/arch/mips/mm/tlb-r4k.c linux.dev/arch/mips/mm/tlb-r4k.c ---- linux.old/arch/mips/mm/tlb-r4k.c 2005-07-07 05:38:31.346491408 +0200 -+++ linux.dev/arch/mips/mm/tlb-r4k.c 2005-07-07 04:39:14.427225000 +0200 -@@ -20,6 +20,10 @@ - #include - #include - -+#ifdef CONFIG_AR7 -+#include -+#endif -+ - extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600; - - /* CP0 hazard avoidance. */ -@@ -375,7 +379,12 @@ - else if (current_cpu_data.cputype == CPU_R4600) - memcpy((void *)KSEG0, &except_vec0_r4600, 0x80); - else -+#ifdef CONFIG_AR7 -+ memcpy((void *)AVALANCHE_VECS_KSEG0, &except_vec0_r4000, 0x80); -+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x80); -+#else - memcpy((void *)KSEG0, &except_vec0_r4000, 0x80); - flush_icache_range(KSEG0, KSEG0 + 0x80); -+#endif - } - } -diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c ---- linux.old/drivers/char/serial.c 2005-07-07 05:38:31.348491104 +0200 -+++ linux.dev/drivers/char/serial.c 2005-07-07 04:39:14.429225000 +0200 -@@ -419,7 +419,40 @@ - return 0; - } - --#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) -+#if defined(CONFIG_AR7) -+ -+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) -+{ -+ return (inb(info->port + (offset * 4)) & 0xff); -+} -+ -+ -+static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset) -+{ -+#ifdef CONFIG_SERIAL_NOPAUSE_IO -+ return (inb(info->port + (offset * 4)) & 0xff); -+#else -+ return (inb_p(info->port + (offset * 4)) & 0xff); -+#endif -+} -+ -+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value) -+{ -+ outb(value, info->port + (offset * 4)); -+} -+ -+ -+static _INLINE_ void serial_outp(struct async_struct *info, int offset, -+ int value) -+{ -+#ifdef CONFIG_SERIAL_NOPAUSE_IO -+ outb(value, info->port + (offset * 4)); -+#else -+ outb_p(value, info->port + (offset * 4)); -+#endif -+} -+ -+#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) - - #include - -@@ -478,8 +511,10 @@ - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -+#ifdef CONFIG_AR7 - #define serial_inp(info, offset) serial_in(info, offset) - #define serial_outp(info, offset, value) serial_out(info, offset, value) -+#endif - - - /* -@@ -1728,7 +1763,15 @@ - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) -+#ifdef CONFIG_AR7 -+ quot = get_avalanche_vbus_freq() / baud; -+ -+ if ((quot%16)>7) -+ quot += 8; -+ quot /=16; -+#else - quot = baud_base / baud; -+#endif - } - /* If the quotient is zero refuse the change */ - if (!quot && old_termios) { -@@ -5552,8 +5595,10 @@ - state->irq = irq_cannonicalize(state->irq); - if (state->hub6) - state->io_type = SERIAL_IO_HUB6; -+#ifndef CONFIG_AR7 - if (state->port && check_region(state->port,8)) - continue; -+#endif - #ifdef CONFIG_MCA - if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus) - continue; -@@ -6009,7 +6054,15 @@ - info->io_type = state->io_type; - info->iomem_base = state->iomem_base; - info->iomem_reg_shift = state->iomem_reg_shift; -+#ifdef CONFIG_AR7 -+ quot = get_avalanche_vbus_freq() / baud; -+ -+ if ((quot%16)>7) -+ quot += 8; -+ quot /=16; -+#else - quot = state->baud_base / baud; -+#endif - cval = cflag & (CSIZE | CSTOPB); - #if defined(__powerpc__) || defined(__alpha__) - cval >>= 8; -diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h ---- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/ar7.h 2005-07-07 04:39:14.430224000 +0200 -@@ -0,0 +1,137 @@ -+#ifndef _MIPS_AR7_H -+#define _MIPS_AR7_H -+ -+#include -+#include -+ -+ -+#ifndef LITTLE_ENDIAN -+#define LITTLE_ENDIAN + } + } +#endif -+ -+#ifndef _LINK_KSEG0_ -+#define _LINK_KSEG0_ + + /* + * IRQ autodetection code.. +diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c +--- linux.old/arch/mips/kernel/mips_ksyms.c 2004-02-18 14:36:30.000000000 +0100 ++++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-08-12 19:32:05.142224752 +0200 +@@ -40,6 +40,12 @@ + extern long __strnlen_user_nocheck_asm(const char *s); + extern long __strnlen_user_asm(const char *s); + ++#ifdef CONFIG_AR7 ++int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value); ++char *prom_getenv(char *envname); +#endif + -+#include -+ -+#define AVALANCHE_UART0_INT 7 -+#define AVALANCHE_UART1_INT 8 -+ -+#define MIPS_EXCEPTION_OFFSET 8 -+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET) -+ -+/* -+ * AR7 board SDRAM base address. This is used to setup the -+ * bootmem tables -+ */ -+ -+#define AVALANCHE_SDRAM_BASE CONFIG_AR7_MEMORY//0x14000000UL -+#define AVALANCHE_INTC_BASE TNETD73XX_INTC_BASE -+ -+ -+/* -+ * AR7 board vectors -+ */ -+ -+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE)) -+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE)) -+ -+ -+/* -+ * Yamon Prom print address. -+ */ -+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500)) -+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */ -+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34) -+ -+/* -+ * AR7 Reset and PSU standby register. -+ */ -+#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */ -+#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */ -+#define AVALANCHE_GORESET 0x1 -+#define AVALANCHE_GOSTBY 0x1 -+#define AVALANCHE_SWRCR (*(unsigned int *)TNETD73XX_RST_CTRL_SWRCR) -+ -+/* -+ * Avalanche UART register base. -+ */ -+ -+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */ -+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */ -+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 ) -+ -+/* -+ * AVALANCHE DMA controller base -+ */ -+ -+#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */ -+ -+ + -+/* -+ * GPIO register map -+ */ -+ -+/* to be obtained from avalanche_map.h */ -+#define AVALANCHE_GPIO_WRITE_REG (KSEG1ADDR(0xa8610904)) -+#define AVALANCHE_GPIO_DIRECTION_REG (KSEG1ADDR(0xa8610908)) -+#define AVALANCHE_GPIO_MODE_REG (KSEG1ADDR(0xa861090C)) -+#define AVALANCHE_GPIO_PIN_COUNT 32 -+#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0,0} -+ -+ -+// Let us define board specific information here. -+ -+#if defined(CONFIG_AR7DB) -+ -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000 -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x55555555 + EXPORT_SYMBOL(mips_machtype); + #ifdef CONFIG_EISA + EXPORT_SYMBOL(EISA_bus); +@@ -103,3 +109,9 @@ + #endif + + EXPORT_SYMBOL(get_wchan); + ++#ifdef CONFIG_AR7 ++EXPORT_SYMBOL_NOVERS(avalanche_request_pacing); ++EXPORT_SYMBOL_NOVERS(prom_getenv); +#endif + -+ -+#if defined(CONFIG_AR7RD) -+ -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000 -+ -+#if defined(CONFIG_AR7_MARVELL) -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000 +diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c +--- linux.old/arch/mips/kernel/setup.c 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/arch/mips/kernel/setup.c 2005-08-12 19:56:27.917849056 +0200 +@@ -235,7 +235,11 @@ + #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) + #define PFN_PHYS(x) ((x) << PAGE_SHIFT) + ++#ifdef CONFIG_AR7 ++#define MAXMEM HIGHMEM_START + CONFIG_AR7_MEMORY +#else -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2 + #define MAXMEM HIGHMEM_START +#endif -+ + #define MAXMEM_PFN PFN_DOWN(MAXMEM) + + static inline void bootmem_init(void) +@@ -320,7 +324,12 @@ + #endif + + /* Initialize the boot-time allocator with low memory only. */ ++#ifdef CONFIG_AR7 ++ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, ++ CONFIG_AR7_MEMORY >> PAGE_SHIFT, max_low_pfn); ++#else + bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn); +#endif -+ -+ -+#if defined(CONFIG_AR7WRD) -+ -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_CPMAC_INTERNAL_PHY_MASK 0x80000000 -+ -+#if defined(CONFIG_AR7_MARVELL) -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x00010000 + + /* + * Register fully available low RAM pages with the bootmem allocator. +@@ -494,6 +503,7 @@ + void hp_setup(void); + void au1x00_setup(void); + void frame_info_init(void); ++ void ar7_setup(void); + + frame_info_init(); + #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE) +@@ -691,6 +701,11 @@ + pmc_yosemite_setup(); + break; + #endif ++#ifdef CONFIG_AR7 ++ case MACH_GROUP_UNKNOWN: ++ ar7_setup(); ++ break; ++#endif + default: + panic("Unsupported architecture"); + } +diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c +--- linux.old/arch/mips/kernel/traps.c 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/arch/mips/kernel/traps.c 2005-08-12 23:38:46.505075576 +0200 +@@ -869,9 +869,15 @@ + + exception_handlers[n] = handler; + if (n == 0 && cpu_has_divec) { ++#ifdef CONFIG_AR7 ++ *(volatile u32 *)(KSEG0+0x200+CONFIG_AR7_MEMORY) = 0x08000000 | ++ (0x03ffffff & (handler >> 2)); ++ flush_icache_range(KSEG0+0x200+CONFIG_AR7_MEMORY, KSEG0 + 0x204 + CONFIG_AR7_MEMORY); +#else -+#define AVALANCHE_CPMAC_EXTERNAL_PHY_MASK 0x2 + *(volatile u32 *)(KSEG0+0x200) = 0x08000000 | + (0x03ffffff & (handler >> 2)); + flush_icache_range(KSEG0+0x200, KSEG0 + 0x204); +#endif -+ + } + return (void *)old_handler; + } +@@ -1022,6 +1028,12 @@ + + if (board_nmi_handler_setup) + board_nmi_handler_setup(); ++#ifdef CONFIG_AR7 ++ memcpy((void *)(KSEG0 + CONFIG_AR7_MEMORY + 0x80), &except_vec1_generic, 0x80); ++ memcpy((void *)(KSEG0 + CONFIG_AR7_MEMORY + 0x180), &except_vec3_generic, 0x80); ++ memcpy((void *)(KSEG0 + CONFIG_AR7_MEMORY + 0x200), &except_vec4, 8); ++ flush_icache_range(KSEG0 + CONFIG_AR7_MEMORY, KSEG0 + CONFIG_AR7_MEMORY + 0x208); +#endif + + flush_icache_range(KSEG0, KSEG0 + 0x400); + +diff -urN linux.old/arch/mips/lib/promlib.c linux.dev/arch/mips/lib/promlib.c +--- linux.old/arch/mips/lib/promlib.c 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/arch/mips/lib/promlib.c 2005-08-12 20:39:57.087195024 +0200 +@@ -1,6 +1,8 @@ + #include + #include ++#include + ++#ifndef CONFIG_AR7 + extern void prom_putchar(char); + + void prom_printf(char *fmt, ...) +@@ -22,3 +24,4 @@ + } + va_end(args); + } ++#endif +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/arch/mips/Makefile 2005-08-12 20:38:28.398677728 +0200 +@@ -369,6 +369,16 @@ + endif + + # ++# Texas Instruments AR7 ++# + -+extern unsigned int tnetd73xx_vbus_freq; -+#define AVALANCHE_VBUS_FREQ tnetd73xx_vbus_freq -+ -+static inline unsigned int get_avalanche_vbus_freq(void) -+{ -+ return (tnetd73xx_vbus_freq); -+} -+ -+#endif /*_MIPS_AR7_H */ -diff -urN linux.old/include/asm-mips/ar7/avalanche.h linux.dev/include/asm-mips/ar7/avalanche.h ---- linux.old/include/asm-mips/ar7/avalanche.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche.h 2005-07-07 04:39:14.430224000 +0200 -@@ -0,0 +1,183 @@ -+/* $Id$ -+ * -+ * avalanche.h -+ * -+ * Jeff Harrell, jharrell@ti.com -+ * Copyright (C) 2000,2001,2002 Texas Instruments Inc. -+ * -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Defines of the AVALANCHE board specific address-MAP, registers, etc. -+ * -+ */ -+#ifndef _MIPS_AVALANCHE_H -+#define _MIPS_AVALANCHE_H -+ -+#include -+ -+/* -+ * AVALANCHE board SDRAM base address. This is used to setup the -+ * bootmem tables -+ */ -+ -+#define AVALANCHE_SDRAM_BASE 0x14000000UL -+ -+/* -+ * AVALANCHE board vectors -+ */ -+ -+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE)) -+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE)) -+/* -+ * Avalanche RTC-device indirect register access. -+ */ -+ -+#define EVM3_RTC_ADR_REG (KSEG1ADDR(0x1f000800)) -+#define EVM3_RTC_DAT_REG (KSEG1ADDR(0x1f000808)) -+ -+/* -+ * Evm3 interrupt controller register base (primary) -+ */ -+ -+#define AVALANCHE_ICTRL_REGS_BASE (KSEG1ADDR(0x08612400)) -+ -+/* -+ * Avalanche exception controller register base (secondary) -+ */ -+#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE+0x80) -+ -+ -+/* -+ * Avalanche Interrupt Channel Control register base -+ */ -+#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200) -+ -+ -+/* -+ * Avalanche UART register base. -+ */ -+ -+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */ -+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 1 */ -+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 ) -+/* -+ * AVALANCHE DMA controller base -+ */ -+ -+#define AVALANCHE_DMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* DMA 0 (channels 0-3) */ -+ -+ -+/* -+ * AVALANCHE display register base. -+ */ -+ -+#define EVM3_ASCII_DISPLAY_POS_BASE (KSEG1ADDR(0x1D000038)) -+#define EVM3_ASCII_DISPLAY_WORD_BASE (KSEG1ADDR(0x1D00003F)) /* How is this used??? JAH */ -+ -+ -+#define EVM3_ASCIIPOS0 0x1D000038 -+#define EVM3_ASCIIPOS1 0x1D000039 -+#define EVM3_ASCIIPOS2 0x1D00003A -+#define EVM3_ASCIIPOS3 0x1D00003B -+#define EVM3_ASCIIPOS4 0x1D00003C -+#define EVM3_ASCIIPOS5 0x1D00003D -+#define EVM3_ASCIIPOS6 0x1D00003E -+#define EVM3_ASCIIPOS7 0x1D00003F -+ -+/* -+ * Yamon Prom print address. -+ */ -+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500)) -+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */ -+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34) -+ -+/* -+ * Evm3 Reset and PSU standby register. -+ */ -+#define AVALANCHE_SOFTRES_REG (KSEG1ADDR(0x08611600)) /* Resets machine */ -+#define AVALANCHE_PSUSTBY_REG (KSEG1ADDR(0x08611600)) /* Turns off power supply unit */ -+#define AVALANCHE_GORESET 0x1 -+#define AVALANCHE_GOSTBY 0x1 -+ -+/************************************************************************ -+ * PERIPHERAL BUS LEDs (P-LED): -+*************************************************************************/ -+ -+/************************************************************************ -+ * P-LED Register Addresses -+*************************************************************************/ -+ -+#define EVM3_PLED (KSEG1ADDR(0x01C500000)) /* 0x1D200000 P-LED */ -+ -+ -+/************************************************************************ -+ * Register field encodings -+*************************************************************************/ ++ifdef CONFIG_AR7 ++LIBS += arch/mips/ar7/ar7.o ++SUBDIRS += arch/mips/ar7 ++LOADADDR += 0x94020000 ++endif + -+/******** reg: PLED ********/ -+/* bits 7:0: VAL */ -+#define EVM3_PLED_VAL_MSK 0xff ++# + # DECstation family + # + ifdef CONFIG_DECSTATION +diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c +--- linux.old/arch/mips/mm/init.c 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/arch/mips/mm/init.c 2005-08-12 21:08:04.420681344 +0200 +@@ -248,6 +248,9 @@ + + max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + low = max_low_pfn; ++#ifdef CONFIG_AR7 ++ low = NODE_DATA(0)->bdata->node_low_pfn - (CONFIG_AR7_MEMORY >> PAGE_SHIFT); ++#endif + high = highend_pfn; + + #ifdef CONFIG_ISA +@@ -270,7 +273,11 @@ + zones_size[ZONE_HIGHMEM] = high - low; + #endif + ++#ifdef CONFIG_AR7 ++ free_area_init_node(0, NODE_DATA(0), 0, zones_size, CONFIG_AR7_MEMORY, 0); ++#else + free_area_init(zones_size); ++#endif + } + + #define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) +@@ -298,6 +305,10 @@ + return 0; + } + ++#ifdef CONFIG_AR7 ++#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) ++#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) ++#endif + void __init mem_init(void) + { + unsigned long codesize, reservedpages, datasize, initsize; +@@ -315,9 +326,21 @@ + #else + max_mapnr = num_mappedpages = num_physpages = max_low_pfn; + #endif ++ ++#ifdef CONFIG_AR7 ++ max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN; ++ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE); ++ ++#if 0 ++ /* WTF? */ ++ free_bootmem_node(NODE_DATA(0), (CONFIG_AR7_MEMORY+PAGE_SIZE), (__pa(&_ftext))-(CONFIG_AR7_MEMORY+PAGE_SIZE)); ++#endif ++ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); ++#else + high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); +- + totalram_pages += free_all_bootmem(); ++#endif + -+/* bit 0: */ -+#define EVM3_PLED_BIT0_SHF 0 -+#define EVM3_PLED_BIT0_MSK (1 << EVM3_PLED_BIT0_SHF) -+#define EVM3_PLED_BIT0_ON EVM3_PLED_BIT0_MSK + totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */ + + reservedpages = ram = 0; +diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c +--- linux.old/drivers/char/serial.c 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/drivers/char/serial.c 2005-08-12 19:32:05.147223992 +0200 +@@ -419,7 +419,40 @@ + return 0; + } + +-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) ++#if defined(CONFIG_AR7) + -+/* bit 1: */ -+#define EVM3_PLED_BIT1_SHF 1 -+#define EVM3_PLED_BIT1_MSK (1 << EVM3_PLED_BIT1_SHF) -+#define EVM3_PLED_BIT1_ON EVM3_PLED_BIT1_MSK ++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) ++{ ++ return (inb(info->port + (offset * 4)) & 0xff); ++} + -+/* bit 2: */ -+#define EVM3_PLED_BIT2_SHF 2 -+#define EVM3_PLED_BIT2_MSK (1 << EVM3_PLED_BIT2_SHF) -+#define EVM3_PLED_BIT2_ON EVM3_PLED_BIT2_MSK + -+/* bit 3: */ -+#define EVM3_PLED_BIT3_SHF 3 -+#define EVM3_PLED_BIT3_MSK (1 << EVM3_PLED_BIT3_SHF) -+#define EVM3_PLED_BIT3_ON EVM3_PLED_BIT3_MSK ++static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset) ++{ ++#ifdef CONFIG_SERIAL_NOPAUSE_IO ++ return (inb(info->port + (offset * 4)) & 0xff); ++#else ++ return (inb_p(info->port + (offset * 4)) & 0xff); ++#endif ++} + -+/* bit 4: */ -+#define EVM3_PLED_BIT4_SHF 4 -+#define EVM3_PLED_BIT4_MSK (1 << EVM3_PLED_BIT4_SHF) -+#define EVM3_PLED_BIT4_ON EVM3_PLED_BIT4_MSK ++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value) ++{ ++ outb(value, info->port + (offset * 4)); ++} + -+/* bit 5: */ -+#define EVM3_PLED_BIT5_SHF 5 -+#define EVM3_PLED_BIT5_MSK (1 << EVM3_PLED_BIT5_SHF) -+#define EVM3_PLED_BIT5_ON EVM3_PLED_BIT5_MSK + -+/* bit 6: */ -+#define EVM3_PLED_BIT6_SHF 6 -+#define EVM3_PLED_BIT6_MSK (1 << EVM3_PLED_BIT6_SHF) -+#define EVM3_PLED_BIT6_ON EVM3_PLED_BIT6_MSK ++static _INLINE_ void serial_outp(struct async_struct *info, int offset, ++ int value) ++{ ++#ifdef CONFIG_SERIAL_NOPAUSE_IO ++ outb(value, info->port + (offset * 4)); ++#else ++ outb_p(value, info->port + (offset * 4)); ++#endif ++} + -+/* bit 7: */ -+#define EVM3_PLED_BIT7_SHF 7 -+#define EVM3_PLED_BIT7_MSK (1 << EVM3_PLED_BIT7_SHF) -+#define EVM3_PLED_BIT7_ON EVM3_PLED_BIT7_MSK ++#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) + + #include + +@@ -478,8 +511,10 @@ + * needed for certain old 386 machines, I've left these #define's + * in.... + */ ++#ifndef CONFIG_AR7 + #define serial_inp(info, offset) serial_in(info, offset) + #define serial_outp(info, offset, value) serial_out(info, offset, value) ++#endif + + + /* +@@ -1728,7 +1763,15 @@ + /* Special case since 134 is really 134.5 */ + quot = (2*baud_base / 269); + else if (baud) ++#ifdef CONFIG_AR7 ++ quot = (CONFIG_AR7_SYS*500000) / baud; + -+#endif /* !(_MIPS_AVALANCHE_H) */ ++ if ((quot%16)>7) ++ quot += 8; ++ quot /=16; ++#else + quot = baud_base / baud; ++#endif + } + /* If the quotient is zero refuse the change */ + if (!quot && old_termios) { +@@ -5552,8 +5595,10 @@ + state->irq = irq_cannonicalize(state->irq); + if (state->hub6) + state->io_type = SERIAL_IO_HUB6; ++#ifndef CONFIG_AR7 + if (state->port && check_region(state->port,8)) + continue; ++#endif + #ifdef CONFIG_MCA + if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus) + continue; +@@ -6009,7 +6054,15 @@ + info->io_type = state->io_type; + info->iomem_base = state->iomem_base; + info->iomem_reg_shift = state->iomem_reg_shift; ++#ifdef CONFIG_AR7 ++ quot = (CONFIG_AR7_SYS*500000) / baud; + ++ if ((quot%16)>7) ++ quot += 8; ++ quot /=16; ++#else + quot = state->baud_base / baud; ++#endif + cval = cflag & (CSIZE | CSTOPB); + #if defined(__powerpc__) || defined(__alpha__) + cval >>= 8; +diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h +--- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/ar7.h 2005-08-12 19:32:05.147223992 +0200 +@@ -0,0 +1,33 @@ ++/* ++ * $Id$ ++ * Copyright (C) $Date$ $Author$ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ++ * ++ */ + ++#ifndef _AR7_H ++#define _AR7_H + ++#include ++#include + ++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY)) + ++#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) ++#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) ++#define AR7_BASE_BAUD ( 3686400 / 16 ) + ++#endif diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h --- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-07-07 04:39:14.431224000 +0200 -@@ -0,0 +1,273 @@ ++++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-08-12 19:32:05.148223840 +0200 +@@ -0,0 +1,283 @@ + /* + * Nitin Dhingra, iamnd@ti.com + * Copyright (C) 2000 Texas Instruments Inc. @@ -3766,6 +3773,16 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm- +#ifndef _AVALANCHE_INTC_H +#define _AVALANCHE_INTC_H + ++/* ----- */ ++ ++#define KSEG1_BASE 0xA0000000 ++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */ ++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK) ++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE) ++#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400) ++ ++/* ----- */ ++ +#define MIPS_EXCEPTION_OFFSET 8 + +/****************************************************************************** @@ -3939,441 +3956,259 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm- + unsigned long int_line27; + unsigned long int_line28; + unsigned long int_line29; -+ unsigned long int_line30; -+ unsigned long int_line31; -+ unsigned long int_line32; -+ unsigned long int_line33; -+ unsigned long int_line34; -+ unsigned long int_line35; -+ unsigned long int_line36; -+ unsigned long int_line37; -+ unsigned long int_line38; -+ unsigned long int_line39; -+}; -+ -+ -+/* Interrupt Line #'s (Sangam peripherals) */ -+ -+/*------------------------------*/ -+/* Sangam primary interrupts */ -+/*------------------------------*/ -+ -+#define UNIFIED_SECONDARY_INTERRUPT 0 -+#define AVALANCHE_EXT_INT_0 1 -+#define AVALANCHE_EXT_INT_1 2 -+/* Line #3 Reserved */ -+/* Line #4 Reserved */ -+#define AVALANCHE_TIMER_0_INT 5 -+#define AVALANCHE_TIMER_1_INT 6 -+#define AVALANCHE_UART0_INT 7 -+#define AVALANCHE_UART1_INT 8 -+#define AVALANCHE_PDMA_INT0 9 -+#define AVALANCHE_PDMA_INT1 10 -+/* Line #11 Reserved */ -+/* Line #12 Reserved */ -+/* Line #13 Reserved */ -+/* Line #14 Reserved */ -+#define AVALANCHE_ATM_SAR_INT 15 -+/* Line #16 Reserved */ -+/* Line #17 Reserved */ -+/* Line #18 Reserved */ -+#define AVALANCHE_MAC0_INT 19 -+/* Line #20 Reserved */ -+#define AVALANCHE_VLYNQ0_INT 21 -+#define AVALANCHE_CODEC_WAKE_INT 22 -+/* Line #23 Reserved */ -+#define AVALANCHE_USB_INT 24 -+#define AVALANCHE_VLYNQ1_INT 25 -+/* Line #26 Reserved */ -+/* Line #27 Reserved */ -+#define AVALANCHE_MAC1_INT 28 -+#define AVALANCHE_I2CM_INT 29 -+#define AVALANCHE_PDMA_INT2 30 -+#define AVALANCHE_PDMA_INT3 31 -+/* Line #32 Reserved */ -+/* Line #33 Reserved */ -+/* Line #34 Reserved */ -+/* Line #35 Reserved */ -+/* Line #36 Reserved */ -+#define AVALANCHE_VDMA_VT_RX_INT 37 -+#define AVALANCHE_VDMA_VT_TX_INT 38 -+#define AVALANCHE_ADSLSS_INT 39 -+ -+/*-----------------------------------*/ -+/* Sangam Secondary Interrupts */ -+/*-----------------------------------*/ -+#define PRIMARY_INTS 40 -+ -+#define EMIF_INT (7 + PRIMARY_INTS) -+ -+ -+extern void avalanche_int_set(int channel, int line); -+ -+ -+#endif /* _AVALANCHE_INTC_H */ -diff -urN linux.old/include/asm-mips/ar7/avalanche_int.h linux.dev/include/asm-mips/ar7/avalanche_int.h ---- linux.old/include/asm-mips/ar7/avalanche_int.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_int.h 2005-07-07 04:39:14.431224000 +0200 -@@ -0,0 +1,298 @@ -+/* $Id$ -+ * -+ * avalancheint.h -+ * -+ * Jeff Harrell, jharrell@ti.com -+ * Copyright (C) 2000,2001 Texas Instruments , Inc. -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Defines for the AVALANCHE interrupt controller. -+ * -+ */ -+#ifndef _MIPS_AVALANCHEINT_H -+#define _MIPS_AVALANCHEINT_H -+ -+#include -+ -+/* Avalanche Interrupt number */ -+#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET) -+/* Linux Interrupt number */ -+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET) -+/* Number of IRQ supported on hw interrupt 0. */ -+ -+//#define SEADINT_UART0 3 /* TTYS0 interrupt on SEAD */ -+//#define SEADINT_UART1 4 /* TTYS1 interrupt on SEAD */ -+ -+ -+#define MIPS_EXCEPTION_OFFSET 8 -+#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET) -+#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET) -+ -+#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET) -+#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET) -+ -+ -+#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + AVINTNUM(AVALANCHE_INT_END_SECONDARY) \ -+ + MIPS_EXCEPTION_OFFSET - 1) -+ -+struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */ -+{ -+ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 */ /* 0x00 */ -+ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 */ /* 0x04 */ -+ volatile unsigned long unused1; /* 0x08 */ -+ volatile unsigned long unused2; /* 0x0C */ -+ volatile unsigned long intcr1; /* Interrupt Clear Register 1 */ /* 0x10 */ -+ volatile unsigned long intcr2; /* Interrupt Clear Register 2 */ /* 0x14 */ -+ volatile unsigned long unused3; /* 0x18 */ -+ volatile unsigned long unused4; /* 0x1C */ -+ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 */ /* 0x20 */ -+ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 */ /* 0x24 */ -+ volatile unsigned long unused5; /* 0x28 */ -+ volatile unsigned long unused6; /* 0x2C */ -+ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 */ /* 0x30 */ -+ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 */ /* 0x34 */ -+ volatile unsigned long unused7; /* 0x38 */ -+ volatile unsigned long unused8; /* 0x3c */ -+ volatile unsigned long pintir; /* Priority Interrupt Index Register */ /* 0x40 */ -+ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg.*/ /* 0x44 */ -+ volatile unsigned long unused9; /* 0x48 */ -+ volatile unsigned long unused10; /* 0x4C */ -+ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 1*/ /* 0x50 */ -+ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 2*/ /* 0x54 */ -+}; -+ -+struct avalanche_exctrl_regs /* Avalanche Exception control registers */ -+{ -+ volatile unsigned long exsr; /* Exceptions Status/Set register */ /* 0x80 */ -+ volatile unsigned long reserved; /* 0x84 */ -+ volatile unsigned long excr; /* Exceptions Clear Register */ /* 0x88 */ -+ volatile unsigned long reserved1; /* 0x8c */ -+ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) */ /* 0x90 */ -+ volatile unsigned long reserved2; /* 0x94 */ -+ volatile unsigned long exiecr; /* Exceptions Interrupt Enable (clear)*/ /* 0x98 */ -+}; -+ -+struct avalanche_channel_int_number -+{ -+ volatile unsigned long cintnr0; /* Channel Interrupt Number Register */ /* 0x200 */ -+ volatile unsigned long cintnr1; /* Channel Interrupt Number Register */ /* 0x204 */ -+ volatile unsigned long cintnr2; /* Channel Interrupt Number Register */ /* 0x208 */ -+ volatile unsigned long cintnr3; /* Channel Interrupt Number Register */ /* 0x20C */ -+ volatile unsigned long cintnr4; /* Channel Interrupt Number Register */ /* 0x210 */ -+ volatile unsigned long cintnr5; /* Channel Interrupt Number Register */ /* 0x214 */ -+ volatile unsigned long cintnr6; /* Channel Interrupt Number Register */ /* 0x218 */ -+ volatile unsigned long cintnr7; /* Channel Interrupt Number Register */ /* 0x21C */ -+ volatile unsigned long cintnr8; /* Channel Interrupt Number Register */ /* 0x220 */ -+ volatile unsigned long cintnr9; /* Channel Interrupt Number Register */ /* 0x224 */ -+ volatile unsigned long cintnr10; /* Channel Interrupt Number Register */ /* 0x228 */ -+ volatile unsigned long cintnr11; /* Channel Interrupt Number Register */ /* 0x22C */ -+ volatile unsigned long cintnr12; /* Channel Interrupt Number Register */ /* 0x230 */ -+ volatile unsigned long cintnr13; /* Channel Interrupt Number Register */ /* 0x234 */ -+ volatile unsigned long cintnr14; /* Channel Interrupt Number Register */ /* 0x238 */ -+ volatile unsigned long cintnr15; /* Channel Interrupt Number Register */ /* 0x23C */ -+ volatile unsigned long cintnr16; /* Channel Interrupt Number Register */ /* 0x240 */ -+ volatile unsigned long cintnr17; /* Channel Interrupt Number Register */ /* 0x244 */ -+ volatile unsigned long cintnr18; /* Channel Interrupt Number Register */ /* 0x248 */ -+ volatile unsigned long cintnr19; /* Channel Interrupt Number Register */ /* 0x24C */ -+ volatile unsigned long cintnr20; /* Channel Interrupt Number Register */ /* 0x250 */ -+ volatile unsigned long cintnr21; /* Channel Interrupt Number Register */ /* 0x254 */ -+ volatile unsigned long cintnr22; /* Channel Interrupt Number Register */ /* 0x358 */ -+ volatile unsigned long cintnr23; /* Channel Interrupt Number Register */ /* 0x35C */ -+ volatile unsigned long cintnr24; /* Channel Interrupt Number Register */ /* 0x260 */ -+ volatile unsigned long cintnr25; /* Channel Interrupt Number Register */ /* 0x264 */ -+ volatile unsigned long cintnr26; /* Channel Interrupt Number Register */ /* 0x268 */ -+ volatile unsigned long cintnr27; /* Channel Interrupt Number Register */ /* 0x26C */ -+ volatile unsigned long cintnr28; /* Channel Interrupt Number Register */ /* 0x270 */ -+ volatile unsigned long cintnr29; /* Channel Interrupt Number Register */ /* 0x274 */ -+ volatile unsigned long cintnr30; /* Channel Interrupt Number Register */ /* 0x278 */ -+ volatile unsigned long cintnr31; /* Channel Interrupt Number Register */ /* 0x27C */ -+ volatile unsigned long cintnr32; /* Channel Interrupt Number Register */ /* 0x280 */ -+ volatile unsigned long cintnr33; /* Channel Interrupt Number Register */ /* 0x284 */ -+ volatile unsigned long cintnr34; /* Channel Interrupt Number Register */ /* 0x288 */ -+ volatile unsigned long cintnr35; /* Channel Interrupt Number Register */ /* 0x28C */ -+ volatile unsigned long cintnr36; /* Channel Interrupt Number Register */ /* 0x290 */ -+ volatile unsigned long cintnr37; /* Channel Interrupt Number Register */ /* 0x294 */ -+ volatile unsigned long cintnr38; /* Channel Interrupt Number Register */ /* 0x298 */ -+ volatile unsigned long cintnr39; /* Channel Interrupt Number Register */ /* 0x29C */ -+}; -+ -+struct avalanche_interrupt_line_to_channel -+{ -+ unsigned long int_line0; /* Start of primary interrupts */ -+ unsigned long int_line1; -+ unsigned long int_line2; -+ unsigned long int_line3; -+ unsigned long int_line4; -+ unsigned long int_line5; -+ unsigned long int_line6; -+ unsigned long int_line7; -+ unsigned long int_line8; -+ unsigned long int_line9; -+ unsigned long int_line10; -+ unsigned long int_line11; -+ unsigned long int_line12; -+ unsigned long int_line13; -+ unsigned long int_line14; -+ unsigned long int_line15; -+ unsigned long int_line16; -+ unsigned long int_line17; -+ unsigned long int_line18; -+ unsigned long int_line19; -+ unsigned long int_line20; -+ unsigned long int_line21; -+ unsigned long int_line22; -+ unsigned long int_line23; -+ unsigned long int_line24; -+ unsigned long int_line25; -+ unsigned long int_line26; -+ unsigned long int_line27; -+ unsigned long int_line28; -+ unsigned long int_line29; -+ unsigned long int_line30; -+ unsigned long int_line31; ++ unsigned long int_line30; ++ unsigned long int_line31; + unsigned long int_line32; -+ unsigned long int_line33; -+ unsigned long int_line34; -+ unsigned long int_line35; -+ unsigned long int_line36; -+ unsigned long int_line37; -+ unsigned long int_line38; -+ unsigned long int_line39; ++ unsigned long int_line33; ++ unsigned long int_line34; ++ unsigned long int_line35; ++ unsigned long int_line36; ++ unsigned long int_line37; ++ unsigned long int_line38; ++ unsigned long int_line39; +}; + -+/* Interrupt Line #'s (Avalanche peripherals) */ ++ ++/* Interrupt Line #'s (Sangam peripherals) */ + +/*------------------------------*/ -+/* Avalanche primary interrupts */ ++/* Sangam primary interrupts */ +/*------------------------------*/ ++ +#define UNIFIED_SECONDARY_INTERRUPT 0 +#define AVALANCHE_EXT_INT_0 1 +#define AVALANCHE_EXT_INT_1 2 -+#define AVALANCHE_EXT_INT_2 3 -+#define AVALANCHE_EXT_INT_3 4 ++/* Line #3 Reserved */ ++/* Line #4 Reserved */ +#define AVALANCHE_TIMER_0_INT 5 +#define AVALANCHE_TIMER_1_INT 6 +#define AVALANCHE_UART0_INT 7 +#define AVALANCHE_UART1_INT 8 +#define AVALANCHE_PDMA_INT0 9 +#define AVALANCHE_PDMA_INT1 10 -+#define AVALANCHE_HDLC_TXA 11 -+#define AVALANCHE_HDLC_TXB 12 -+#define AVALANCHE_HDLC_RXA 13 -+#define AVALANCHE_HDLC_RXB 14 -+#define AVALANCHE_ATM_SAR_TXA 15 -+#define AVALANCHE_ATM_SAR_TXB 16 -+#define AVALANCHE_ATM_SAR_RXA 17 -+#define AVALANCHE_ATM_SAR_RXB 18 -+#define AVALANCHE_MAC_TXA 19 -+#define AVALANCHE_MAC_RXA 20 -+#define AVALANCHE_DSP_SUB0 21 -+#define AVALANCHE_DSP_SUB1 22 -+#define AVALANCHE_DES_INT 23 ++/* Line #11 Reserved */ ++/* Line #12 Reserved */ ++/* Line #13 Reserved */ ++/* Line #14 Reserved */ ++#define AVALANCHE_ATM_SAR_INT 15 ++/* Line #16 Reserved */ ++/* Line #17 Reserved */ ++/* Line #18 Reserved */ ++#define AVALANCHE_MAC0_INT 19 ++/* Line #20 Reserved */ ++#define AVALANCHE_VLYNQ0_INT 21 ++#define AVALANCHE_CODEC_WAKE_INT 22 ++/* Line #23 Reserved */ +#define AVALANCHE_USB_INT 24 -+#define AVALANCHE_PCI_INTA 25 -+#define AVALANCHE_PCI_INTB 26 -+#define AVALANCHE_PCI_INTC 27 -+/* Line #28 Reserved */ ++#define AVALANCHE_VLYNQ1_INT 25 ++/* Line #26 Reserved */ ++/* Line #27 Reserved */ ++#define AVALANCHE_MAC1_INT 28 +#define AVALANCHE_I2CM_INT 29 +#define AVALANCHE_PDMA_INT2 30 +#define AVALANCHE_PDMA_INT3 31 -+#define AVALANCHE_CODEC 32 -+#define AVALANCHE_MAC_TXB 33 -+#define AVALANCHE_MAC_RXB 34 ++/* Line #32 Reserved */ ++/* Line #33 Reserved */ ++/* Line #34 Reserved */ +/* Line #35 Reserved */ +/* Line #36 Reserved */ -+/* Line #37 Reserved */ -+/* Line #38 Reserved */ -+/* Line #39 Reserved */ -+ -+#define DEBUG_MISSED_INTS 1 -+ -+#ifdef DEBUG_MISSED_INTS -+struct debug_missed_int -+{ -+ unsigned int atm_sar_txa; -+ unsigned int atm_sar_txb; -+ unsigned int atm_sar_rxa; -+ unsigned int atm_sar_rxb; -+ unsigned int mac_txa; -+ unsigned int mac_rxa; -+ unsigned int mac_txb; -+ unsigned int mac_rxb; -+}; -+#endif /* DEBUG_MISSED_INTS */ ++#define AVALANCHE_VDMA_VT_RX_INT 37 ++#define AVALANCHE_VDMA_VT_TX_INT 38 ++#define AVALANCHE_ADSLSS_INT 39 + +/*-----------------------------------*/ -+/* Avalanche Secondary Interrupts */ ++/* Sangam Secondary Interrupts */ +/*-----------------------------------*/ +#define PRIMARY_INTS 40 + -+#define AVALANCHE_HDLC_STATUS (0 + PRIMARY_INTS) -+#define AVALANCHE_SAR_STATUS (1 + PRIMARY_INTS) -+/* Line #02 Reserved */ -+#define AVALANCHE_ETH_MACA_LNK_CHG (3 + PRIMARY_INTS) -+#define AVALANCHE_ETH_MACA_MGT (4 + PRIMARY_INTS) -+#define AVALANCHE_PCI_STATUS_INT (5 + PRIMARY_INTS) -+/* Line #06 Reserved */ -+#define AVALANCHE_EXTERN_MEM_INT (7 + PRIMARY_INTS) -+#define AVALANCHE_DSP_A_DOG (8 + PRIMARY_INTS) -+#define AVALANCHE_DSP_B_DOG (9 + PRIMARY_INTS) -+/* Line #10-#20 Reserved */ -+#define AVALANCHE_ETH_MACB_LNK_CHG (21 + PRIMARY_INTS) -+#define AVALANCHE_ETH_MACB_MGT (22 + PRIMARY_INTS) -+#define AVALANCHE_AAL2_STATUS (23 + PRIMARY_INTS) -+/* Line #24-#31 Reserved */ -+ -+#define AVALANCHEINT_UART0 LNXINTNUM(AVALANCHE_UART0_INT) -+#define AVALANCHEINT_UART1 LNXINTNUM(AVALANCHE_UART1_INT) -+#define SEADINT_UART0 3 /* TTYS0 interrupt on SEAD */ -+#define SEADINT_UART1 4 /* TTYS1 interrupt on SEAD */ -+ -+#ifdef JIMK_INT_CTRLR -+/*-----------------------------------*/ -+/* Jim Kennedy's Interrupt Controller*/ -+/*-----------------------------------*/ ++#define EMIF_INT (7 + PRIMARY_INTS) + -+/* to clear the interrupt write the bit back to the status reg */ + -+#define JIMK_INT_STATUS (*(volatile unsigned int *)(0xA8612400)) -+#define JIMK_INT_MASK (*(volatile unsigned int *)(0xA8612404)) -+#define JIMK_SAR_STATUS (1<<0) -+#define JIMK_SAR_TX_A (1<<1) -+#define JIMK_SAR_TX_B (1<<2) -+#define JIMK_SAR_RX_A (1<<3) -+#define JIMK_SAR_RX_B (1<<4) -+#define JIMK_AAL2_STATUS (1<<5) -+#define JIMK_UART0_INT (1<<11) ++extern void avalanche_int_set(int channel, int line); + -+#ifdef SEAD_USB_DEVELOPMENT -+#define JIMK_USB_INT (1<<0) -+#endif /* SEAD_USB_DEVELOPMENT */ + -+#endif /* JIMK_INT_CTRLR */ ++#endif /* _AVALANCHE_INTC_H */ +diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h +--- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-08-12 19:32:05.148223840 +0200 +@@ -0,0 +1,174 @@ ++#ifndef _AVALANCHE_MISC_H_ ++#define _AVALANCHE_MISC_H_ ++ ++typedef enum AVALANCHE_ERR_t ++{ ++ AVALANCHE_ERR_OK = 0, /* OK or SUCCESS */ ++ AVALANCHE_ERR_ERROR = -1, /* Unspecified/Generic ERROR */ + -+extern void avalanche_int_set(int channel, int line); -+extern void avalancheint_init(void); ++ /* Pointers and args */ ++ AVALANCHE_ERR_INVARG = -2, /* Invaild argument to the call */ ++ AVALANCHE_ERR_NULLPTR = -3, /* NULL pointer */ ++ AVALANCHE_ERR_BADPTR = -4, /* Bad (out of mem) pointer */ + ++ /* Memory issues */ ++ AVALANCHE_ERR_ALLOC_FAIL = -10, /* allocation failed */ ++ AVALANCHE_ERR_FREE_FAIL = -11, /* free failed */ ++ AVALANCHE_ERR_MEM_CORRUPT = -12, /* corrupted memory */ ++ AVALANCHE_ERR_BUF_LINK = -13, /* buffer linking failed */ + -+#endif /* !(_MIPS_AVALANCHEINT_H) */ ++ /* Device issues */ ++ AVALANCHE_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */ ++ AVALANCHE_ERR_DEVICE_MALFUNC = -21, /* device malfunction */ + ++ AVALANCHE_ERR_INVID = -30 /* Invalid ID */ + ++} AVALANCHE_ERR; + ++/***************************************************************************** ++ * Reset Control Module ++ *****************************************************************************/ + -diff -urN linux.old/include/asm-mips/ar7/avalanche_prom.h linux.dev/include/asm-mips/ar7/avalanche_prom.h ---- linux.old/include/asm-mips/ar7/avalanche_prom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_prom.h 2005-07-07 04:39:14.431224000 +0200 -@@ -0,0 +1,54 @@ -+/* $Id$ -+ * -+ * prom.h -+ * -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999 MIPS Technologies, Inc. -+ * -+ * ######################################################################## -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * ######################################################################## -+ * -+ * Sead bootprom interface for the Linux kernel. -+ * -+ */ ++typedef enum AVALANCHE_RESET_MODULE_tag ++{ ++ RESET_MODULE_UART0 = 0, ++ RESET_MODULE_UART1 = 1, ++ RESET_MODULE_I2C = 2, ++ RESET_MODULE_TIMER0 = 3, ++ RESET_MODULE_TIMER1 = 4, ++ RESET_MODULE_GPIO = 6, ++ RESET_MODULE_ADSLSS = 7, ++ RESET_MODULE_USBS = 8, ++ RESET_MODULE_SAR = 9, ++ RESET_MODULE_VDMA_VT = 11, ++ RESET_MODULE_FSER = 12, ++ RESET_MODULE_VLYNQ1 = 16, ++ RESET_MODULE_EMAC0 = 17, ++ RESET_MODULE_DMA = 18, ++ RESET_MODULE_BIST = 19, ++ RESET_MODULE_VLYNQ0 = 20, ++ RESET_MODULE_EMAC1 = 21, ++ RESET_MODULE_MDIO = 22, ++ RESET_MODULE_ADSLSS_DSP = 23, ++ RESET_MODULE_EPHY = 26 ++} AVALANCHE_RESET_MODULE_T; + -+#ifndef _MIPS_PROM_H -+#define _MIPS_PROM_H -+ -+extern char *prom_getcmdline(void); -+extern char *prom_getenv(char *name); -+extern void setup_prom_printf(void); -+extern void prom_printf(char *fmt, ...); -+extern void prom_init_cmdline(void); -+extern void prom_meminit(void); -+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); -+extern void prom_free_prom_memory (void); -+extern void sead_display_message(const char *str); -+extern void sead_display_word(unsigned int num); -+extern int get_ethernet_addr(char *ethernet_addr); -+ -+/* Memory descriptor management. */ -+#define PROM_MAX_PMEMBLOCKS 32 -+struct prom_pmemblock { -+ unsigned long base; /* Within KSEG0. */ -+ unsigned int size; /* In bytes. */ -+ unsigned int type; /* free or prom memory */ -+}; ++typedef enum AVALANCHE_RESET_CTRL_tag ++{ ++ IN_RESET = 0, ++ OUT_OF_RESET ++} AVALANCHE_RESET_CTRL_T; ++ ++typedef enum AVALANCHE_SYS_RST_MODE_tag ++{ ++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */ ++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */ ++} AVALANCHE_SYS_RST_MODE_T; ++ ++typedef enum AVALANCHE_SYS_RESET_STATUS_tag ++{ ++ HARDWARE_RESET = 0, ++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */ ++ WATCHDOG_RESET, ++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */ ++} AVALANCHE_SYS_RESET_STATUS_T; ++ ++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module); ++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode); ++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void); ++ ++typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl); ++ ++/***************************************************************************** ++ * Power Control Module ++ *****************************************************************************/ ++ ++typedef enum AVALANCHE_POWER_CTRL_tag ++{ ++ POWER_CTRL_POWER_UP = 0, ++ POWER_CTRL_POWER_DOWN ++} AVALANCHE_POWER_CTRL_T; ++ ++typedef enum AVALANCHE_SYS_POWER_MODE_tag ++{ ++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */ ++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */ ++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */ ++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */ ++} AVALANCHE_SYS_POWER_MODE_T; ++ ++void avalanche_power_ctrl(unsigned int power_module, AVALANCHE_POWER_CTRL_T power_ctrl); ++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module); ++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode); ++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void); ++ ++/***************************************************************************** ++ * Wakeup Control ++ *****************************************************************************/ ++ ++typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag ++{ ++ WAKEUP_INT0 = 1, ++ WAKEUP_INT1 = 2, ++ WAKEUP_INT2 = 4, ++ WAKEUP_INT3 = 8 ++} AVALANCHE_WAKEUP_INTERRUPT_T; ++ ++typedef enum TNETV1050_WAKEUP_CTRL_tag ++{ ++ WAKEUP_DISABLED = 0, ++ WAKEUP_ENABLED ++} AVALANCHE_WAKEUP_CTRL_T; ++ ++typedef enum TNETV1050_WAKEUP_POLARITY_tag ++{ ++ WAKEUP_ACTIVE_HIGH = 0, ++ WAKEUP_ACTIVE_LOW ++} AVALANCHE_WAKEUP_POLARITY_T; ++ ++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int, ++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl, ++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity); ++ ++/***************************************************************************** ++ * GPIO Control ++ *****************************************************************************/ ++ ++typedef enum AVALANCHE_GPIO_PIN_MODE_tag ++{ ++ FUNCTIONAL_PIN = 0, ++ GPIO_PIN = 1 ++} AVALANCHE_GPIO_PIN_MODE_T; ++ ++typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag ++{ ++ GPIO_OUTPUT_PIN = 0, ++ GPIO_INPUT_PIN = 1 ++} AVALANCHE_GPIO_PIN_DIRECTION_T; ++ ++typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T; ++ ++void avalanche_gpio_init(void); ++int avalanche_gpio_ctrl(unsigned int gpio_pin, ++ AVALANCHE_GPIO_PIN_MODE_T pin_mode, ++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction); ++int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin, ++ AVALANCHE_GPIO_PIN_MODE_T pin_mode, ++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction); ++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value); ++int avalanche_gpio_in_bit(unsigned int gpio_pin); ++int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index); ++int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index); ++int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index); ++ ++unsigned int avalanche_get_chip_version_info(void); + ++unsigned int avalanche_get_vbus_freq(void); ++void avalanche_set_vbus_freq(unsigned int); + -+#endif /* !(_MIPS_PROM_H) */ + ++typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation); ++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation); ++unsigned int avalanche_is_mdix_on_chip(void); ++ ++#endif diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h --- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-07-07 04:39:14.433224000 +0200 ++++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-08-12 19:32:05.149223688 +0200 @@ -0,0 +1,567 @@ +/* + * $Id$ @@ -4935,16 +4770,311 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm- + +#define VMAC_STATS_BASE(X) (X + 0x00000400) + ++#endif __AVALANCHE_REGS_H ++ ++ ++ ++ ++ ++ +diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h +--- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/if_port.h 2005-08-12 19:32:05.149223688 +0200 +@@ -0,0 +1,26 @@ ++/******************************************************************************* ++ * FILE PURPOSE: Interface port id Header file ++ ******************************************************************************* ++ * FILE NAME: if_port.h ++ * ++ * DESCRIPTION: Header file carrying information about port ids of interfaces ++ * ++ * ++ * (C) Copyright 2003, Texas Instruments, Inc ++ ******************************************************************************/ ++#ifndef _IF_PORT_H_ ++#define _IF_PORT_H_ ++ ++#define AVALANCHE_CPMAC_LOW_PORT_ID 0 ++#define AVALANCHE_CPMAC_HIGH_PORT_ID 1 ++#define AVALANCHE_USB_PORT_ID 2 ++#define AVALANCHE_WLAN_PORT_ID 3 ++ ++ ++#define AVALANCHE_MARVELL_BASE_PORT_ID 4 ++ ++/* The marvell ports occupy port ids from 4 to 8 */ ++/* so the next port id number should start at 9 */ ++ ++ ++#endif /* _IF_PORT_H_ */ +diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h +--- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-08-12 19:32:05.150223536 +0200 +@@ -0,0 +1,77 @@ ++#ifndef _SANGAM_BOARDS_H ++#define _SANGAM_BOARDS_H ++ ++// Let us define board specific information here. ++ ++ ++#if defined(CONFIG_AR7DB) ++ ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++ ++#endif ++ ++ ++#if defined(CONFIG_AR7RD) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7WI) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7V) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7WRD) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7VWI) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined CONFIG_SEAD2 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0 ++#include ++#endif ++ ++ +#endif +diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h +--- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/sangam.h 2005-08-12 19:32:05.150223536 +0200 +@@ -0,0 +1,180 @@ ++#ifndef _SANGAM_H_ ++#define _SANGAM_H_ ++ ++#include ++#include ++ ++/*---------------------------------------------------- ++ * Sangam's Module Base Addresses ++ *--------------------------------------------------*/ ++#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */ ++#define AVALANCHE_BROADBAND_INTERFACE__BASE (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */ ++#define AVALANCHE_ATM_SAR_BASE (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */ ++#define AVALANCHE_USB_SLAVE_BASE (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */ ++#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */ ++#define AVALANCHE_LOW_CPMAC_BASE (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */ ++#define AVALANCHE_EMIF_CONTROL_BASE (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */ ++#define AVALANCHE_GPIO_BASE (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */ ++#define AVALANCHE_CLOCK_CONTROL_BASE (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */ ++#define AVALANCHE_WATCHDOG_TIMER_BASE (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */ ++#define AVALANCHE_TIMER0_BASE (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */ ++#define AVALANCHE_TIMER1_BASE (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */ ++#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */ ++#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */ ++#define AVALANCHE_I2C_BASE (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */ ++#define AVALANCHE_USB_SLAVE_CONTROL_BASE (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */ ++#define AVALANCHE_MCDMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */ ++#define AVALANCHE_RESET_CONTROL_BASE (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */ ++#define AVALANCHE_BIST_CONTROL_BASE (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */ ++#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */ ++#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */ ++#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */ ++#define AVALANCHE_MDIO_BASE (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO */ ++#define AVALANCHE_FSER_BASE (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */ ++#define AVALANCHE_INTC_BASE (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC */ ++#define AVALANCHE_HIGH_CPMAC_BASE (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */ ++#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */ ++ ++#define AVALANCHE_SDRAM_BASE 0x14000000UL ++ ++ ++/*---------------------------------------------------- ++ * Sangam Interrupt Map (Primary Interrupts) ++ *--------------------------------------------------*/ ++ ++#define AVALANCHE_UNIFIED_SECONDARY_INT 0 ++#define AVALANCHE_EXT_INT_0 1 ++#define AVALANCHE_EXT_INT_1 2 ++/* Line# 3 to 4 are reserved */ ++#define AVALANCHE_TIMER_0_INT 5 ++#define AVALANCHE_TIMER_1_INT 6 ++#define AVALANCHE_UART0_INT 7 ++#define AVALANCHE_UART1_INT 8 ++#define AVALANCHE_DMA_INT0 9 ++#define AVALANCHE_DMA_INT1 10 ++/* Line# 11 to 14 are reserved */ ++#define AVALANCHE_ATM_SAR_INT 15 ++/* Line# 16 to 18 are reserved */ ++#define AVALANCHE_LOW_CPMAC_INT 19 ++/* Line# 20 is reserved */ ++#define AVALANCHE_LOW_VLYNQ_INT 21 ++#define AVALANCHE_CODEC_WAKEUP_INT 22 ++/* Line# 23 is reserved */ ++#define AVALANCHE_USB_SLAVE_INT 24 ++#define AVALANCHE_HIGH_VLYNQ_INT 25 ++/* Line# 26 to 27 are reserved */ ++#define AVALANCHE_UNIFIED_PHY_INT 28 ++#define AVALANCHE_I2C_INT 29 ++#define AVALANCHE_DMA_INT2 30 ++#define AVALANCHE_DMA_INT3 31 ++/* Line# 32 is reserved */ ++#define AVALANCHE_HIGH_CPMAC_INT 33 ++/* Line# 34 to 36 is reserved */ ++#define AVALANCHE_VDMA_VT_RX_INT 37 ++#define AVALANCHE_VDMA_VT_TX_INT 38 ++#define AVALANCHE_ADSL_SUB_SYSTEM_INT 39 ++ ++ ++#define AVALANCHE_EMIF_INT 47 ++ ++ ++ ++/*----------------------------------------------------------- ++ * Sangam's Reset Bits ++ *---------------------------------------------------------*/ ++ ++#define AVALANCHE_UART0_RESET_BIT 0 ++#define AVALANCHE_UART1_RESET_BIT 1 ++#define AVALANCHE_I2C_RESET_BIT 2 ++#define AVALANCHE_TIMER0_RESET_BIT 3 ++#define AVALANCHE_TIMER1_RESET_BIT 4 ++/* Reset bit 5 is reserved. */ ++#define AVALANCHE_GPIO_RESET_BIT 6 ++#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT 7 ++#define AVALANCHE_USB_SLAVE_RESET_BIT 8 ++#define AVALANCHE_ATM_SAR_RESET_BIT 9 ++/* Reset bit 10 is reserved. */ ++#define AVALANCHE_VDMA_VT_RESET_BIT 11 ++#define AVALANCHE_FSER_RESET_BIT 12 ++/* Reset bit 13 to 15 are reserved */ ++#define AVALANCHE_HIGH_VLYNQ_RESET_BIT 16 ++#define AVALANCHE_LOW_CPMAC_RESET_BIT 17 ++#define AVALANCHE_MCDMA_RESET_BIT 18 ++#define AVALANCHE_BIST_RESET_BIT 19 ++#define AVALANCHE_LOW_VLYNQ_RESET_BIT 20 ++#define AVALANCHE_HIGH_CPMAC_RESET_BIT 21 ++#define AVALANCHE_MDIO_RESET_BIT 22 ++#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT 23 ++/* Reset bit 24 to 25 are reserved */ ++#define AVALANCHE_LOW_EPHY_RESET_BIT 26 ++/* Reset bit 27 to 31 are reserved */ ++ ++ ++#define AVALANCHE_POWER_MODULE_USBSP 0 ++#define AVALANCHE_POWER_MODULE_WDTP 1 ++#define AVALANCHE_POWER_MODULE_UT0P 2 ++#define AVALANCHE_POWER_MODULE_UT1P 3 ++#define AVALANCHE_POWER_MODULE_IICP 4 ++#define AVALANCHE_POWER_MODULE_VDMAP 5 ++#define AVALANCHE_POWER_MODULE_GPIOP 6 ++#define AVALANCHE_POWER_MODULE_VLYNQ1P 7 ++#define AVALANCHE_POWER_MODULE_SARP 8 ++#define AVALANCHE_POWER_MODULE_ADSLP 9 ++#define AVALANCHE_POWER_MODULE_EMIFP 10 ++#define AVALANCHE_POWER_MODULE_ADSPP 12 ++#define AVALANCHE_POWER_MODULE_RAMP 13 ++#define AVALANCHE_POWER_MODULE_ROMP 14 ++#define AVALANCHE_POWER_MODULE_DMAP 15 ++#define AVALANCHE_POWER_MODULE_BISTP 16 ++#define AVALANCHE_POWER_MODULE_TIMER0P 18 ++#define AVALANCHE_POWER_MODULE_TIMER1P 19 ++#define AVALANCHE_POWER_MODULE_EMAC0P 20 ++#define AVALANCHE_POWER_MODULE_EMAC1P 22 ++#define AVALANCHE_POWER_MODULE_EPHYP 24 ++#define AVALANCHE_POWER_MODULE_VLYNQ0P 27 ++ ++ ++ + + ++/* ++ * Sangam board vectors ++ */ ++ ++#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE)) ++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE)) ++ ++/*----------------------------------------------------------------------------- ++ * Sangam's system register. ++ * ++ *---------------------------------------------------------------------------*/ ++#define AVALANCHE_DCL_BOOTCR (KSEG1ADDR(0x08611A00)) ++#define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8) ++#define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600)) ++#define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604)) ++#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600)) ++ ++#define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00)) ++#define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C)) ++ ++#define AVALANCHE_GPIO_DATA_IN (AVALANCHE_GPIO_BASE + 0x0) ++#define AVALANCHE_GPIO_DATA_OUT (AVALANCHE_GPIO_BASE + 0x4) ++#define AVALANCHE_GPIO_DIR (AVALANCHE_GPIO_BASE + 0x8) ++#define AVALANCHE_GPIO_ENBL (AVALANCHE_GPIO_BASE + 0xC) ++#define AVALANCHE_CVR (AVALANCHE_GPIO_BASE + 0x14) ++ ++/* ++ * Yamon Prom print address. ++ */ ++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500)) ++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */ ++#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34) + ++#define AVALANCHE_BASE_BAUD ( 3686400 / 16 ) + ++#define AVALANCHE_GPIO_PIN_COUNT 32 ++#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0} + ++#include "sangam_boards.h" + ++#endif /*_SANGAM_H_ */ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h --- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-07-07 04:39:14.434224000 +0200 ++++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-08-12 19:32:05.171220344 +0200 @@ -0,0 +1,42 @@ +/****************************************************************************** + * FILE PURPOSE: TNETD73xx Error Definations Header File @@ -4990,8 +5120,8 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-m +#endif /* __TNETD73XX_ERR_H__ */ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h --- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-07-07 04:39:14.433224000 +0200 -@@ -0,0 +1,340 @@ ++++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-08-12 19:32:05.151223384 +0200 +@@ -0,0 +1,338 @@ +/****************************************************************************** + * FILE PURPOSE: TNETD73xx Common Header File + ****************************************************************************** @@ -5032,8 +5162,6 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ + +#ifndef _ASMLANGUAGE /* This part not for assembly language */ + -+#include -+ +extern unsigned int tnetd73xx_mips_freq; +extern unsigned int tnetd73xx_vbus_freq; + @@ -5069,15 +5197,15 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ +#endif + +#ifndef KSEG0 -+#define KSEG0(addr) (((u32)(addr) & ~KSEG_MSK) | KSEG0_BASE) ++#define KSEG0(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE) +#endif + +#ifndef KSEG1 -+#define KSEG1(addr) (((u32)(addr) & ~KSEG_MSK) | KSEG1_BASE) ++#define KSEG1(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE) +#endif + +#ifndef KUSEG -+#define KUSEG(addr) ((u32)(addr) & ~KSEG_MSK) ++#define KUSEG(addr) ((__u32)(addr) & ~KSEG_MSK) +#endif + +#ifndef PHYS_ADDR @@ -5093,24 +5221,24 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ +#endif + +#ifndef REG8_ADDR -+#define REG8_ADDR(addr) (volatile u8 *)(PHYS_TO_K1(addr)) -+#define REG8_DATA(addr) (*(volatile u8 *)(PHYS_TO_K1(addr))) ++#define REG8_ADDR(addr) (volatile __u8 *)(PHYS_TO_K1(addr)) ++#define REG8_DATA(addr) (*(volatile __u8 *)(PHYS_TO_K1(addr))) +#define REG8_WRITE(addr, data) REG8_DATA(addr) = data; -+#define REG8_READ(addr, data) data = (u8) REG8_DATA(addr); ++#define REG8_READ(addr, data) data = (__u8) REG8_DATA(addr); +#endif + +#ifndef REG16_ADDR -+#define REG16_ADDR(addr) (volatile u16 *)(PHYS_TO_K1(addr)) -+#define REG16_DATA(addr) (*(volatile u16 *)(PHYS_TO_K1(addr))) ++#define REG16_ADDR(addr) (volatile __u16 *)(PHYS_TO_K1(addr)) ++#define REG16_DATA(addr) (*(volatile __u16 *)(PHYS_TO_K1(addr))) +#define REG16_WRITE(addr, data) REG16_DATA(addr) = data; -+#define REG16_READ(addr, data) data = (u16) REG16_DATA(addr); ++#define REG16_READ(addr, data) data = (__u16) REG16_DATA(addr); +#endif + +#ifndef REG32_ADDR -+#define REG32_ADDR(addr) (volatile u32 *)(PHYS_TO_K1(addr)) -+#define REG32_DATA(addr) (*(volatile u32 *)(PHYS_TO_K1(addr))) ++#define REG32_ADDR(addr) (volatile __u32 *)(PHYS_TO_K1(addr)) ++#define REG32_DATA(addr) (*(volatile __u32 *)(PHYS_TO_K1(addr))) +#define REG32_WRITE(addr, data) REG32_DATA(addr) = data; -+#define REG32_READ(addr, data) data = (u32) REG32_DATA(addr); ++#define REG32_READ(addr, data) data = (__u32) REG32_DATA(addr); +#endif + +#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */ @@ -5334,8 +5462,8 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ +#endif /* __TNETD73XX_H_ */ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h --- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-07-07 04:39:14.434224000 +0200 -@@ -0,0 +1,243 @@ ++++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-08-12 19:32:05.172220192 +0200 +@@ -0,0 +1,239 @@ +/****************************************************************************** + * FILE PURPOSE: TNETD73xx Misc modules API Header + ****************************************************************************** @@ -5355,10 +5483,6 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm- +#ifndef __TNETD73XX_MISC_H__ +#define __TNETD73XX_MISC_H__ + -+#include -+ -+#define BOOTCR_MIPS_ASYNC_MODE (1 << 25) -+ +/***************************************************************************** + * Reset Control Module + *****************************************************************************/ @@ -5516,9 +5640,9 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm- + CLKC_ADSLSS +} TNETD73XX_CLKC_ID_T; + -+void tnetd73xx_clkc_init(u32 afeclk, u32 refclk, u32 xtal3in); -+TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, u32 output_freq); -+u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id); ++void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in); ++TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq); ++__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id); + +/***************************************************************************** + * GPIO Control @@ -5576,17 +5700,17 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm- +int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin); + +/* TNETD73XX Revision */ -+u32 tnetd73xx_get_revision(void); ++__u32 tnetd73xx_get_revision(void); + +#endif /* __TNETD73XX_MISC_H__ */ diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h ---- linux.old/include/asm-mips/io.h 2005-07-07 05:38:31.416480768 +0200 -+++ linux.dev/include/asm-mips/io.h 2005-07-07 04:39:14.434224000 +0200 +--- linux.old/include/asm-mips/io.h 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/include/asm-mips/io.h 2005-08-12 21:13:28.133469520 +0200 @@ -63,8 +63,12 @@ #ifdef CONFIG_64BIT_PHYS_ADDR #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT) #else -+#ifdef CONFIG_AR7_PAGING ++#ifdef CONFIG_AR7 +#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + CONFIG_AR7_MEMORY) +#else #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) @@ -5596,8 +5720,8 @@ diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h #define IO_SPACE_LIMIT 0xffff diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h ---- linux.old/include/asm-mips/irq.h 2005-07-07 05:38:31.424479552 +0200 -+++ linux.dev/include/asm-mips/irq.h 2005-07-07 04:39:14.435224000 +0200 +--- linux.old/include/asm-mips/irq.h 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/include/asm-mips/irq.h 2005-08-12 19:32:05.172220192 +0200 @@ -14,7 +14,12 @@ #include #include @@ -5612,13 +5736,13 @@ diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h #ifdef CONFIG_I8259 static inline int irq_cannonicalize(int irq) diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h ---- linux.old/include/asm-mips/page.h 2005-07-07 05:38:31.426479248 +0200 -+++ linux.dev/include/asm-mips/page.h 2005-07-07 04:39:14.435224000 +0200 +--- linux.old/include/asm-mips/page.h 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/include/asm-mips/page.h 2005-08-12 21:13:38.481896320 +0200 @@ -129,7 +129,11 @@ #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) -+#ifdef CONFIG_AR7_PAGING ++#ifdef CONFIG_AR7 +#define virt_to_page(kaddr) phys_to_page(__pa(kaddr)) +#else #define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT)) @@ -5627,14 +5751,14 @@ diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h ---- linux.old/include/asm-mips/pgtable-32.h 2005-07-07 05:38:31.434478032 +0200 -+++ linux.dev/include/asm-mips/pgtable-32.h 2005-07-07 04:39:14.435224000 +0200 +--- linux.old/include/asm-mips/pgtable-32.h 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/include/asm-mips/pgtable-32.h 2005-08-12 21:13:46.898616784 +0200 @@ -108,7 +108,18 @@ * and a page entry and page directory to the page they refer to. */ -#ifdef CONFIG_CPU_VR41XX -+#if defined(CONFIG_AR7_PAGING) ++#if defined(CONFIG_AR7) +#define mk_pte(page, pgprot) \ +({ \ + pte_t __pte; \ @@ -5662,7 +5786,7 @@ diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgt } -#ifdef CONFIG_CPU_VR41XX -+#if defined(CONFIG_AR7_PAGING) ++#if defined(CONFIG_AR7) +#define phys_to_page(phys) (mem_map + (((phys)-CONFIG_AR7_MEMORY) >> PAGE_SHIFT)) +#define pte_page(x) phys_to_page(pte_val(x)) +#elif defined(CONFIG_CPU_VR41XX) @@ -5670,8 +5794,8 @@ diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgt #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot)) #else diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h ---- linux.old/include/asm-mips/serial.h 2005-07-07 05:38:31.470472560 +0200 -+++ linux.dev/include/asm-mips/serial.h 2005-07-07 04:39:14.436223000 +0200 +--- linux.old/include/asm-mips/serial.h 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/include/asm-mips/serial.h 2005-08-12 19:32:05.174219888 +0200 @@ -65,6 +65,15 @@ #define C_P(card,port) (((card)<<6|(port)<<3) + 1) @@ -5679,8 +5803,8 @@ diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial. +#ifdef CONFIG_AR7 +#include +#define AR7_SERIAL_PORT_DEFNS \ -+ { 0, AVALANCHE_BASE_BAUD, AVALANCHE_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \ -+ { 0, AVALANCHE_BASE_BAUD, AVALANCHE_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS }, ++ { 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \ ++ { 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS }, +#else +#define AR7_SERIAL_PORT_DEFNS +#endif @@ -5697,8 +5821,8 @@ diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial. AU1000_SERIAL_PORT_DEFNS \ COBALT_SERIAL_PORT_DEFNS \ diff -urN linux.old/Makefile linux.dev/Makefile ---- linux.old/Makefile 2005-07-07 05:38:31.320495360 +0200 -+++ linux.dev/Makefile 2005-07-07 04:39:14.501214000 +0200 +--- linux.old/Makefile 2005-07-10 03:00:44.000000000 +0200 ++++ linux.dev/Makefile 2005-08-12 19:32:05.122227792 +0200 @@ -91,7 +91,7 @@ CPPFLAGS := -D__KERNEL__ -I$(HPATH)