X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/a1f29a448983ea1757c10fdf5fb8887fcb6eee31..8b7966f57cde5319c7072c57cb81f9728783f91e:/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
index 728b2847b..b985948d7 100755
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
@@ -6,6 +6,9 @@
 . /etc/network.overrides
 alias debug=${DEBUG:-:}
 
+# WGT634u
+grep 'mtd0: 00060000' /proc/mtd 2>&- >&- && exit
+
 remap () {
 	for type in lan wifi wan pppoe
 	do
@@ -30,7 +33,7 @@ nvram_set() { # for the linksys fixup part
 # work around braindead CFE defaults in linksys routers
 boardtype=$(nvram get boardtype)
 boardflags=$(($(nvram get boardflags)))
-[ "$boardtype" = "bcm4710dev" ] && boardtype="0xdeadbeef"
+[ "$boardtype" = "bcm94710dev" ] && boardtype="0xdeadbeef"
 adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
 case "$(( $boardtype ))" in
 	"$((0x708))")
@@ -104,6 +107,14 @@ case "$(nvram get productid)" in
 		nvram set lan_ifnames="eth1 eth2"
 		nvram set wan_ifname="none"
 	;;
+	*)
+		# wl-500g defaults. these are placed here, because WL-HDD and WL-300g
+		# might have the same nvram settings.
+		[ "$(nvram get boardnum)" = "asusX" \
+		-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+			nvram_default wan_device "eth1"
+		}
+	;;
 esac
 
 # hacks for wap54g hardware
@@ -127,21 +138,12 @@ esac
 	nvram_default wl0id 0x4320
 }
 
-WAN_PROTO="$(nvram get wan_proto)"
-[  "$WAN_PROTO" = "pptp" \
--o "$WAN_PROTO" = "pppoe" ] && {
-	WAN_IFNAME="$(nvram get wan_ifname)"
-	[ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || {
-		nvram set wan_ifname=ppp0
-		nvram set ${WAN_PROTO}_ifname="$WAN_IFNAME"
-	}
-}
-
 # defaults
 nvram_default lan_ifname "br0"
 nvram_default lan_ifnames "$FAILSAFE_ifnames"
 
 nvram_default wan_ifname "vlan1"
+nvram_default wan_device "vlan1"
 nvram_default wan_proto "dhcp"
 
 nvram_default wl0_ssid OpenWrt
@@ -149,6 +151,13 @@ nvram_default wl0_mode ap
 nvram_default wl0_infra 1
 nvram_default wl0_radio 1
 
+WAN_PROTO="$(nvram get wan_proto)"
+WAN_IFNAME="$(nvram get wan_ifname)"
+case "$WAN_PROTO" in
+	pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;;
+	*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";;
+esac
+
 [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
 	# if default wifi mac, set two higher than the lan mac
 	nvram set il0macaddr=$(nvram get et0macaddr|