X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/b74589690e9a124421651935d6713c408831b2a2..b48013b35bcda1979506c8761c56282f1ec741e1:/target/linux/brcm-2.4/base-files/etc/init.d/netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 4d66962f9..0e014b625 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -4,7 +4,42 @@
 START=05
 
 start() {
-	[ -e /etc/config/network ] && exit 0
+	[ -e /etc/config/network ] && {
+		local batch
+
+		config_cb() {
+			case "$1" in
+			switch)
+				option_cb() {
+					case "$1" in
+					vlan[0-9]|vlan1[0-5])
+						local id="${1#vlan}"
+						local ports="${2%\*}"
+						append batch "delete network.eth0.${1}${N}"
+						append batch "set network.eth0_${id}=switch_vlan${N}"
+						append batch "set network.eth0_${id}.device=eth0${N}"
+						append batch "set network.eth0_${id}.vlan=${id}${N}"
+						append batch "set network.eth0_${id}.ports='${ports}'${N}"
+					;;
+					esac
+				}
+			;;
+			switch_vlan)
+				option_cb() { :; }
+				batch=""
+			;;
+			esac
+		}
+
+		config_load network
+
+		[ -n "$batch" ] && {
+			logger -t netconfig "migrating switch config to new format ..."
+			echo "$batch${N}commit network" | uci batch
+		}
+
+		exit 0
+	}
 
 	mkdir -p /etc/config
 
@@ -73,7 +108,7 @@ start() {
 			c["vlan0ports"] = ""
 			c["vlan1ports"] = ""
 		}
-		if (model == "ASUS WL-500g") {
+		if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
 			c["wan_ifname"] = "eth1"
 			c["lan_ifname"] = "eth0"
 		}
@@ -130,8 +165,10 @@ start() {
 			c["lan_ifname"] = "eth0"
 			c["wan_ifname"] = "eth1"
 		}
-		if (nvram["boardtype"] == "0x478") {
-			# generic broadcom 4785 processor with 5397 switch?
+		# generic broadcom 4705/4785 processor with 5397 switch?
+		#  EXCEPT Linksys WRT300N V1.1
+		if ((nvram["boardtype"] == "0x478") && \
+		    (model != "Linksys WRT300N V1.1")) {
 			c["vlan0ports"] = "1 2 3 4 8*"
 			c["vlan1ports"] = "0 8"
 		}
@@ -171,6 +208,12 @@ start() {
 			c["vlan0ports"] = "0 1 2 3 4 5u"
 			c["vlan1ports"] = ""
 		}
+		if (model == "OvisLink WL-1600GL") {
+			c["lan_ifname"] = "eth0.0"
+			c["wan_ifname"] = "eth0.1"
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
 
 		if (c["vlan0ports"] || c["vlan1ports"]) {
 			print "#### VLAN configuration "