X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/bdfc7e8894fd283a26dc38f1d54e3f87aff2cc54..5e588d2fdb9bb6fc8f64b6a098fa6212e56848ca:/target/linux/lantiq/base-files/etc/uci-defaults/network

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/network b/target/linux/lantiq/base-files/etc/uci-defaults/network
index 3b7fe2662..94dea9a24 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/network
@@ -1,58 +1,15 @@
 #!/bin/sh
 #
-# Copyright (C) 2011 OpenWrt.org
+# Copyright (C) 2011-2012 OpenWrt.org
 #
 
-set_interface_loopback() {
-	uci batch <<EOF
-set network.loopback='interface'
-set network.loopback.ifname='lo'
-set network.loopback.proto='static'
-set network.loopback.ipaddr='127.0.0.1'
-set network.loopback.netmask='255.0.0.0'
-EOF
-}
-
-set_interface_raw() {
-	local cfg=$1
-	local ifname=$2
-
-	uci batch <<EOF
-set network.$cfg='interface'
-set network.$cfg.ifname='$ifname'
-set network.$cfg.proto='none'
-EOF
-}
-
-set_interface_lan() {
-	local ifname=$1
-
-	uci batch <<EOF
-set network.lan='interface'
-set network.lan.ifname='$ifname'
-set network.lan.type='bridge'
-set network.lan.proto='static'
-set network.lan.ipaddr='192.168.1.1'
-set network.lan.netmask='255.255.255.0'
-EOF
-}
-
-set_interface_wan() {
-	local ifname=$1
-
-	uci batch <<EOF
-set network.wan='interface'
-set network.wan.ifname='$ifname'
-set network.wan.proto='dhcp'
-EOF
-}
+[ -e /etc/config/network ] && exit 0
 
 set_atm_wan() {
 	local vpi=$1
 	local vci=$2
 	local encaps=$3
 	local payload=$4
-
 	uci batch <<EOF
 set network.atm='atm-bridge'
 set network.atm.unit='0'
@@ -68,66 +25,56 @@ set network.wan.password='bar'
 EOF
 }
 
-set_interfaces_lan_wan() {
-	local lan_ifname=$1
-	local wan_ifname=$2
-
-	set_interface_lan "$lan_ifname"
-	set_interface_wan "$wan_ifname"
-}
-
-add_switch() {
-	local name=$1
-	local reset=$2
-	local enable=$3
-	uci batch <<EOF
-add network switch
-set network.@switch[-1].name='$name'
-set network.@switch[-1].reset='$reset'
-set network.@switch[-1].enable_vlan='$enable'
-EOF
-}
-
-add_switch_vlan() {
-	local device=$1
-	local vlan=$2
-	local ports=$3
+set_adsl() {
+	local fwannex=$1
+	local annex=$2
 	uci batch <<EOF
-add network switch_vlan
-set network.@switch_vlan[-1].device='$device'
-set network.@switch_vlan[-1].vlan='$vlan'
-set network.@switch_vlan[-1].ports='$ports'
+set network.adsl='adsl-device'
+set network.adsl.fwannex='$fwannex'
+set network.adsl.annex='$annex'
 EOF
 }
 
-[ -e /etc/config/network ] && exit 0
-
+. /lib/functions/uci-defaults.sh
 . /lib/lantiq.sh
 
 touch /etc/config/network
 
-set_interface_loopback
-set_interface_lan 'eth0'
-
-dsl=$(lantiq_soc_has_adsl)
-[ -z "$dsl" ] || set_atm_wan '1' '32' 'llc' 'bridged'
+ucidef_set_interface_loopback
+ucidef_set_interface_lan 'eth0'
 
+vpi=1
+vci=32
+encaps="llc"
+payload="bridged"
+fwannex=$(lantiq_dsl_fwannex)
 board=$(lantiq_board_name)
+dsl=$(lantiq_soc_has_adsl)
 
 case "$board" in
-GIGASX76X)
-	set_interface_lan "eth0.1"
-	add_switch "eth0" "1" "1"
-	add_switch_vlan "eth0" "1" "1 2 3 4 5t"
-	set_atm_wan "1" "32" "llc" "bridged"
+# annex B with adm6996
+ARV4520PW|GIGASX76X)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "1 2 3 4 5t"
+	set_adsl "b" "b2p"
+	;;
+
+# annex A with ar8316
+ARV4519PW|ARV7518PW)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
+	set_adsl "a" "a2p"
 	;;
 
-*)
-	# custom foo goes here
-	true
+ARV7525PW|ARV4525PW|*)
+	set_adsl "$fwannex" "${fwannex}2p"
 	;;
 esac
 
+[ -z "$dsl" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+
 uci commit network
 
 exit 0