X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/d6c6d9b502bc41ac75557c417684243a202e8d0e..a604d7454cd81740bb3f2ada108e37284477c822:/target/linux/generic/patches-2.6.32/975-ssb_update.patch diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch index 373df1a62..a619e6cc6 100644 --- a/target/linux/generic/patches-2.6.32/975-ssb_update.patch +++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch @@ -1,6 +1,151 @@ --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c -@@ -373,6 +373,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c +@@ -3,7 +3,7 @@ + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb + if (!ccdev) + return; + bus = ccdev->bus; ++ ++ /* We support SLOW only on 6..9 */ ++ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW) ++ mode = SSB_CLKMODE_DYNAMIC; ++ ++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) ++ return; /* PMU controls clockmode, separated function needed */ ++ SSB_WARN_ON(ccdev->id.revision >= 20); ++ + /* chipcommon cores prior to rev6 don't support dynamic clock control */ + if (ccdev->id.revision < 6) + return; +- /* chipcommon cores rev10 are a whole new ball game */ ++ ++ /* ChipCommon cores rev10+ need testing */ + if (ccdev->id.revision >= 10) + return; ++ + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + + switch (mode) { +- case SSB_CLKMODE_SLOW: ++ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */ + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + break; + case SSB_CLKMODE_FAST: +- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ +- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; +- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; +- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ if (ccdev->id.revision < 10) { ++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ ++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; ++ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; ++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ } else { ++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, ++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) | ++ SSB_CHIPCO_SYSCLKCTL_FORCEHT)); ++ /* udelay(150); TODO: not available in early init */ ++ } + break; + case SSB_CLKMODE_DYNAMIC: +- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; +- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) +- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; +- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); +- +- /* for dynamic control, we have to release our xtal_pu "force on" */ +- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) +- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); ++ if (ccdev->id.revision < 10) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; ++ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != ++ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) ++ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; ++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ ++ /* For dynamic control, we have to release our xtal_pu ++ * "force on" */ ++ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) ++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); ++ } else { ++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, ++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & ++ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT)); ++ } + break; + default: + SSB_WARN_ON(1); +@@ -209,6 +235,24 @@ static void chipco_powercontrol_init(str + } + } + ++/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */ ++static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ case 0x4322: ++ case 0x4328: ++ return 7000; ++ case 0x4325: ++ /* TODO: */ ++ default: ++ return 15000; ++ } ++} ++ ++/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */ + static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) + { + struct ssb_bus *bus = cc->dev->bus; +@@ -218,6 +262,12 @@ static void calc_fast_powerup_delay(stru + + if (bus->bustype != SSB_BUSTYPE_PCI) + return; ++ ++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { ++ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc); ++ return; ++ } ++ + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + +@@ -236,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); ++ ++ if (cc->dev->id.revision >= 20) { ++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); ++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0); ++ } ++ + ssb_pmu_init(cc); + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +@@ -373,6 +429,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c { return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); } @@ -10,6 +155,15 @@ { --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver + * +- * Copyright 2009, Michael Buesch ++ * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. @@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ case 0x5354: ssb_pmu0_pllinit_r0(cc, crystalfreq); @@ -23,16 +177,68 @@ default: ssb_printk(KERN_ERR PFX "ERROR: PLL init unknown for device %04X\n", -@@ -417,6 +423,7 @@ static void ssb_pmu_resources_init(struc +@@ -411,12 +417,15 @@ static void ssb_pmu_resources_init(struc + u32 min_msk = 0, max_msk = 0; + unsigned int i; + const struct pmu_res_updown_tab_entry *updown_tab = NULL; +- unsigned int updown_tab_size; ++ unsigned int updown_tab_size = 0; + const struct pmu_res_depend_tab_entry *depend_tab = NULL; +- unsigned int depend_tab_size; ++ unsigned int depend_tab_size = 0; switch (bus->chip_id) { case 0x4312: ++ min_msk = 0xCBB; ++ break; + case 0x4322: /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF +@@ -495,9 +504,9 @@ static void ssb_pmu_resources_init(struc + chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); + } + ++/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */ + void ssb_pmu_init(struct ssb_chipcommon *cc) + { +- struct ssb_bus *bus = cc->dev->bus; + u32 pmucap; + + if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) +@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon + ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", + cc->pmu.rev, pmucap); + +- if (cc->pmu.rev >= 1) { +- if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { +- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, +- ~SSB_CHIPCO_PMU_CTL_NOILPONW); +- } else { +- chipco_set32(cc, SSB_CHIPCO_PMU_CTL, +- SSB_CHIPCO_PMU_CTL_NOILPONW); +- } +- } ++ if (cc->pmu.rev == 1) ++ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, ++ ~SSB_CHIPCO_PMU_CTL_NOILPONW); ++ else ++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, ++ SSB_CHIPCO_PMU_CTL_NOILPONW); + ssb_pmu_pll_init(cc); + ssb_pmu_resources_init(cc); + } --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c +@@ -3,7 +3,7 @@ + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation +- * Copyright 2008, Michael Buesch ++ * Copyright 2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -12,6 +12,7 @@ #include #include @@ -41,8 +247,51 @@ /* +@@ -105,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige + gige_write32(dev, SSB_GIGE_PCICFG + offset, value); + } + +-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, +- int reg, int size, u32 *val) ++static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus, ++ unsigned int devfn, int reg, ++ int size, u32 *val) + { + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; +@@ -135,8 +137,9 @@ static int ssb_gige_pci_read_config(stru + return PCIBIOS_SUCCESSFUL; + } + +-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, +- int reg, int size, u32 val) ++static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus, ++ unsigned int devfn, int reg, ++ int size, u32 val) + { + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; +@@ -165,7 +168,8 @@ static int ssb_gige_pci_write_config(str + return PCIBIOS_SUCCESSFUL; + } + +-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id) ++static int __devinit ssb_gige_probe(struct ssb_device *sdev, ++ const struct ssb_device_id *id) + { + struct ssb_gige *dev; + u32 base, tmslow, tmshigh; --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); } @@ -64,7 +313,28 @@ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c -@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore +@@ -3,7 +3,7 @@ + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -15,6 +15,11 @@ + + #include "ssb_private.h" + ++static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address); ++static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data); ++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); ++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, ++ u8 address, u16 data); + + static inline + u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, .mem_resource = &ssb_pcicore_mem_resource, @@ -85,7 +355,7 @@ if (d->bus->ops != &ssb_pcicore_pciops) { /* This is not a device on the PCI-core bridge. */ return -ENODEV; -@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci +@@ -268,27 +265,6 @@ int ssb_pcicore_plat_dev_init(struct pci ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", pci_name(d)); @@ -113,7 +383,298 @@ /* Fix up interrupt lines */ d->irq = ssb_mips_irq(extpci_core->dev) + 2; pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc +@@ -338,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st + return ssb_mips_irq(extpci_core->dev) + 2; + } + +-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) ++static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) + { + u32 val; + +@@ -403,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st + register_pci_controller(&ssb_pcicore_controller); + } + +-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) ++static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc) + { + struct ssb_bus *bus = pc->dev->bus; + u16 chipid_top; +@@ -432,25 +408,137 @@ static int pcicore_is_in_hostmode(struct + } + #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + ++/************************************************** ++ * Workarounds. ++ **************************************************/ ++ ++static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc) ++{ ++ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); ++ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { ++ tmp &= ~0xF000; ++ tmp |= (pc->dev->core_index << 12); ++ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp); ++ } ++} ++ ++static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) ++{ ++ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++} ++ ++static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) ++{ ++ const u8 serdes_pll_device = 0x1D; ++ const u8 serdes_rx_device = 0x1F; ++ u16 tmp; ++ ++ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, ++ ssb_pcicore_polarity_workaround(pc)); ++ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); ++ if (tmp & 0x4000) ++ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++} ++ ++static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) ++{ ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ u32 tmp; ++ ++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); ++ tmp |= SSB_PCICORE_SBTOPCI_PREF; ++ tmp |= SSB_PCICORE_SBTOPCI_BURST; ++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); ++ ++ if (pdev->id.revision < 5) { ++ tmp = ssb_read32(pdev, SSB_IMCFGLO); ++ tmp &= ~SSB_IMCFGLO_SERTO; ++ tmp |= 2; ++ tmp &= ~SSB_IMCFGLO_REQTO; ++ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; ++ ssb_write32(pdev, SSB_IMCFGLO, tmp); ++ ssb_commit_settings(bus); ++ } else if (pdev->id.revision >= 11) { ++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); ++ tmp |= SSB_PCICORE_SBTOPCI_MRM; ++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); ++ } ++} ++ ++static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) ++{ ++ u32 tmp; ++ u8 rev = pc->dev->id.revision; ++ ++ if (rev == 0 || rev == 1) { ++ /* TLP Workaround register. */ ++ tmp = ssb_pcie_read(pc, 0x4); ++ tmp |= 0x8; ++ ssb_pcie_write(pc, 0x4, tmp); ++ } ++ if (rev == 1) { ++ /* DLLP Link Control register. */ ++ tmp = ssb_pcie_read(pc, 0x100); ++ tmp |= 0x40; ++ ssb_pcie_write(pc, 0x100, tmp); ++ } ++ ++ if (rev == 0) { ++ const u8 serdes_rx_device = 0x1F; ++ ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 2 /* Timer */, 0x8128); ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 6 /* CDR */, 0x0100); ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 7 /* CDR BW */, 0x1466); ++ } else if (rev == 3 || rev == 4 || rev == 5) { ++ /* TODO: DLLP Power Management Threshold */ ++ ssb_pcicore_serdes_workaround(pc); ++ /* TODO: ASPM */ ++ } else if (rev == 7) { ++ /* TODO: No PLL down */ ++ } ++ ++ if (rev >= 6) { ++ /* Miscellaneous Configuration Fixup */ ++ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5)); ++ if (!(tmp & 0x8000)) ++ pcicore_write16(pc, SSB_PCICORE_SPROM(5), ++ tmp | 0x8000); ++ } ++} + + /************************************************** + * Generic and Clientmode operation code. + **************************************************/ + +-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) ++static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) + { ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ ++ if (bus->bustype == SSB_BUSTYPE_PCI) ++ ssb_pcicore_fix_sprom_core_index(pc); ++ + /* Disable PCI interrupts. */ +- ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ssb_write32(pdev, SSB_INTVEC, 0); ++ ++ /* Additional PCIe always once-executed workarounds */ ++ if (pc->dev->id.coreid == SSB_DEV_PCIE) { ++ ssb_pcicore_serdes_workaround(pc); ++ /* TODO: ASPM */ ++ /* TODO: Clock Request Update */ ++ } + } + +-void ssb_pcicore_init(struct ssb_pcicore *pc) ++void __devinit ssb_pcicore_init(struct ssb_pcicore *pc) + { + struct ssb_device *dev = pc->dev; +- struct ssb_bus *bus; + + if (!dev) + return; +- bus = dev->bus; + if (!ssb_device_is_enabled(dev)) + ssb_device_enable(dev, 0); + +@@ -475,58 +563,104 @@ static void ssb_pcie_write(struct ssb_pc + pcicore_write32(pc, 0x134, data); + } + +-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, +- u8 address, u16 data) ++static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) + { + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ v |= (0x1F << 18); ++ v |= (phy << 4); ++ pcicore_write32(pc, mdio_data, v); ++ ++ udelay(10); ++ for (i = 0; i < 200; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++} ++ ++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) ++{ ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u16 ret = 0; ++ u32 v; ++ int i; ++ + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } ++ + v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ +- v |= (u32)device << 22; ++ if (pc->dev->id.revision < 10) ++ v |= (u32)device << 22; + v |= (u32)address << 18; +- v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); +- for (i = 0; i < 10; i++) { ++ for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ if (v & 0x100 /* Trans complete */) { ++ udelay(10); ++ ret = pcicore_read32(pc, mdio_data); + break; ++ } + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); ++ return ret; + } + +-static void ssb_broadcast_value(struct ssb_device *dev, +- u32 address, u32 data) ++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, ++ u8 address, u16 data) + { +- /* This is used for both, PCI and ChipCommon core, so be careful. */ +- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); +- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u32 v; ++ int i; + +- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); +- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ +- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); +- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ +-} ++ v = 0x80; /* Enable Preamble Sequence */ ++ v |= 0x2; /* MDIO Clock Divisor */ ++ pcicore_write32(pc, mdio_control, v); + +-static void ssb_commit_settings(struct ssb_bus *bus) +-{ +- struct ssb_device *dev; ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } + +- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; +- if (WARN_ON(!dev)) +- return; +- /* This forces an update of the cached registers. */ +- ssb_broadcast_value(dev, 0xFD8, 0); ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ if (pc->dev->id.revision < 10) ++ v |= (u32)device << 22; ++ v |= (u32)address << 18; ++ v |= data; ++ pcicore_write32(pc, mdio_data, v); ++ /* Wait for the device to complete the transaction */ ++ udelay(10); ++ for (i = 0; i < max_retries; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++ pcicore_write32(pc, mdio_control, 0); + } + + int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, +@@ -551,13 +685,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); /* Enable interrupts for this device. */ @@ -129,9 +690,76 @@ err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); if (err) goto out; +@@ -579,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc + if (pc->setup_done) + goto out; + if (pdev->id.coreid == SSB_DEV_PCI) { +- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); +- tmp |= SSB_PCICORE_SBTOPCI_PREF; +- tmp |= SSB_PCICORE_SBTOPCI_BURST; +- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); +- +- if (pdev->id.revision < 5) { +- tmp = ssb_read32(pdev, SSB_IMCFGLO); +- tmp &= ~SSB_IMCFGLO_SERTO; +- tmp |= 2; +- tmp &= ~SSB_IMCFGLO_REQTO; +- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; +- ssb_write32(pdev, SSB_IMCFGLO, tmp); +- ssb_commit_settings(bus); +- } else if (pdev->id.revision >= 11) { +- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); +- tmp |= SSB_PCICORE_SBTOPCI_MRM; +- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); +- } ++ ssb_pcicore_pci_setup_workarounds(pc); + } else { + WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); +- //TODO: Better make defines for all these magic PCIE values. +- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { +- /* TLP Workaround register. */ +- tmp = ssb_pcie_read(pc, 0x4); +- tmp |= 0x8; +- ssb_pcie_write(pc, 0x4, tmp); +- } +- if (pdev->id.revision == 0) { +- const u8 serdes_rx_device = 0x1F; +- +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 2 /* Timer */, 0x8128); +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 6 /* CDR */, 0x0100); +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 7 /* CDR BW */, 0x1466); +- } else if (pdev->id.revision == 1) { +- /* DLLP Link Control register. */ +- tmp = ssb_pcie_read(pc, 0x100); +- tmp |= 0x40; +- ssb_pcie_write(pc, 0x100, tmp); +- } ++ ssb_pcicore_pcie_setup_workarounds(pc); + } + pc->setup_done = 1; + out: --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -18,6 +18,7 @@ +@@ -3,7 +3,7 @@ + * Subsystem core + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -12,12 +12,14 @@ + + #include + #include ++#include + #include + #include + #include #include #include #include @@ -139,7 +767,7 @@ #include #include -@@ -140,6 +141,19 @@ static void ssb_device_put(struct ssb_de +@@ -140,6 +142,19 @@ static void ssb_device_put(struct ssb_de put_device(dev->dev); } @@ -159,7 +787,7 @@ static int ssb_device_resume(struct device *dev) { struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -210,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -210,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -302,7 +930,59 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -490,8 +495,7 @@ static int ssb_devices_register(struct s +@@ -380,6 +386,35 @@ static int ssb_device_uevent(struct devi + ssb_dev->id.revision); + } + ++#define ssb_config_attr(attrib, field, format_string) \ ++static ssize_t \ ++attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ ++} ++ ++ssb_config_attr(core_num, core_index, "%u\n") ++ssb_config_attr(coreid, id.coreid, "0x%04x\n") ++ssb_config_attr(vendor, id.vendor, "0x%04x\n") ++ssb_config_attr(revision, id.revision, "%u\n") ++ssb_config_attr(irq, irq, "%u\n") ++static ssize_t ++name_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%s\n", ++ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); ++} ++ ++static struct device_attribute ssb_device_attrs[] = { ++ __ATTR_RO(name), ++ __ATTR_RO(core_num), ++ __ATTR_RO(coreid), ++ __ATTR_RO(vendor), ++ __ATTR_RO(revision), ++ __ATTR_RO(irq), ++ __ATTR_NULL, ++}; ++ + static struct bus_type ssb_bustype = { + .name = "ssb", + .match = ssb_bus_match, +@@ -389,6 +424,7 @@ static struct bus_type ssb_bustype = { + .suspend = ssb_device_suspend, + .resume = ssb_device_resume, + .uevent = ssb_device_uevent, ++ .dev_attrs = ssb_device_attrs, + }; + + static void ssb_buses_lock(void) +@@ -481,6 +517,7 @@ static int ssb_devices_register(struct s + #ifdef CONFIG_SSB_PCIHOST + sdev->irq = bus->host_pci->irq; + dev->parent = &bus->host_pci->dev; ++ sdev->dma_dev = dev->parent; + #endif + break; + case SSB_BUSTYPE_PCMCIA: +@@ -490,13 +527,13 @@ static int ssb_devices_register(struct s #endif break; case SSB_BUSTYPE_SDIO: @@ -312,7 +992,46 @@ dev->parent = &bus->host_sdio->dev; #endif break; -@@ -830,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b + case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; ++ sdev->dma_dev = dev; + break; + } + +@@ -523,7 +560,7 @@ error: + } + + /* Needs ssb_buses_lock() */ +-static int ssb_attach_queued_buses(void) ++static int __devinit ssb_attach_queued_buses(void) + { + struct ssb_bus *bus, *n; + int err = 0; +@@ -734,9 +771,9 @@ out: + return err; + } + +-static int ssb_bus_register(struct ssb_bus *bus, +- ssb_invariants_func_t get_invariants, +- unsigned long baseaddr) ++static int __devinit ssb_bus_register(struct ssb_bus *bus, ++ ssb_invariants_func_t get_invariants, ++ unsigned long baseaddr) + { + int err; + +@@ -817,8 +854,8 @@ err_disable_xtal: + } + + #ifdef CONFIG_SSB_PCIHOST +-int ssb_bus_pcibus_register(struct ssb_bus *bus, +- struct pci_dev *host_pci) ++int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus, ++ struct pci_dev *host_pci) + { + int err; + +@@ -830,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -322,9 +1041,536 @@ } return err; +@@ -838,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); + #endif /* CONFIG_SSB_PCIHOST */ + + #ifdef CONFIG_SSB_PCMCIAHOST +-int ssb_bus_pcmciabus_register(struct ssb_bus *bus, +- struct pcmcia_device *pcmcia_dev, +- unsigned long baseaddr) ++int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus, ++ struct pcmcia_device *pcmcia_dev, ++ unsigned long baseaddr) + { + int err; + +@@ -860,8 +900,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register + #endif /* CONFIG_SSB_PCMCIAHOST */ + + #ifdef CONFIG_SSB_SDIOHOST +-int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, +- unsigned int quirks) ++int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus, ++ struct sdio_func *func, ++ unsigned int quirks) + { + int err; + +@@ -881,9 +922,9 @@ int ssb_bus_sdiobus_register(struct ssb_ + EXPORT_SYMBOL(ssb_bus_sdiobus_register); + #endif /* CONFIG_SSB_PCMCIAHOST */ + +-int ssb_bus_ssbbus_register(struct ssb_bus *bus, +- unsigned long baseaddr, +- ssb_invariants_func_t get_invariants) ++int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus, ++ unsigned long baseaddr, ++ ssb_invariants_func_t get_invariants) + { + int err; + +@@ -964,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 + switch (plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + if (m & SSB_CHIPCO_CLK_T6_MMASK) +- return SSB_CHIPCO_CLK_T6_M0; +- return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M0; + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ +@@ -1080,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str + { + u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; + +- /* The REJECT bit changed position in TMSLOW between +- * Backplane revisions. */ ++ /* The REJECT bit seems to be different for Backplane rev 2.3 */ + switch (rev) { + case SSB_IDLOW_SSBREV_22: +- return SSB_TMSLOW_REJECT_22; ++ case SSB_IDLOW_SSBREV_24: ++ case SSB_IDLOW_SSBREV_26: ++ return SSB_TMSLOW_REJECT; + case SSB_IDLOW_SSBREV_23: + return SSB_TMSLOW_REJECT_23; +- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ +- case SSB_IDLOW_SSBREV_25: /* same here */ +- case SSB_IDLOW_SSBREV_26: /* same here */ ++ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ + case SSB_IDLOW_SSBREV_27: /* same here */ +- return SSB_TMSLOW_REJECT_23; /* this is a guess */ ++ return SSB_TMSLOW_REJECT; /* this is a guess */ + default: + printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); + WARN_ON(1); + } +- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); ++ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); + } + + int ssb_device_is_enabled(struct ssb_device *dev) +@@ -1155,10 +1195,10 @@ void ssb_device_enable(struct ssb_device + } + EXPORT_SYMBOL(ssb_device_enable); + +-/* Wait for a bit in a register to get set or unset. ++/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds */ +-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask, +- int timeout, int set) ++static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, ++ int timeout, int set) + { + int i; + u32 val; +@@ -1166,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic + for (i = 0; i < timeout; i++) { + val = ssb_read32(dev, reg); + if (set) { +- if (val & bitmask) ++ if ((val & bitmask) == bitmask) + return 0; + } else { + if (!(val & bitmask)) +@@ -1183,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic + + void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) + { +- u32 reject; ++ u32 reject, val; + + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) + return; + + reject = ssb_tmslow_reject_bitmask(dev); +- ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); +- ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1); +- ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); +- ssb_write32(dev, SSB_TMSLOW, +- SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | +- reject | SSB_TMSLOW_RESET | +- core_specific_flags); +- ssb_flush_tmslow(dev); ++ ++ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { ++ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); ++ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); ++ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); ++ ++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { ++ val = ssb_read32(dev, SSB_IMSTATE); ++ val |= SSB_IMSTATE_REJECT; ++ ssb_write32(dev, SSB_IMSTATE, val); ++ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, ++ 0); ++ } ++ ++ ssb_write32(dev, SSB_TMSLOW, ++ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | ++ reject | SSB_TMSLOW_RESET | ++ core_specific_flags); ++ ssb_flush_tmslow(dev); ++ ++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { ++ val = ssb_read32(dev, SSB_IMSTATE); ++ val &= ~SSB_IMSTATE_REJECT; ++ ssb_write32(dev, SSB_IMSTATE, val); ++ } ++ } + + ssb_write32(dev, SSB_TMSLOW, + reject | SSB_TMSLOW_RESET | +@@ -1205,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic + } + EXPORT_SYMBOL(ssb_device_disable); + ++/* Some chipsets need routing known for PCIe and 64-bit DMA */ ++static bool ssb_dma_translation_special_bit(struct ssb_device *dev) ++{ ++ u16 chip_id = dev->bus->chip_id; ++ ++ if (dev->id.coreid == SSB_DEV_80211) { ++ return (chip_id == 0x4322 || chip_id == 43221 || ++ chip_id == 43231 || chip_id == 43222); ++ } ++ ++ return 0; ++} ++ + u32 ssb_dma_translation(struct ssb_device *dev) + { + switch (dev->bus->bustype) { + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: +- return SSB_PCI_DMA; ++ if (dev->bus->host_pci->is_pcie && ++ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { ++ return SSB_PCIE_DMA_H32; ++ } else { ++ if (ssb_dma_translation_special_bit(dev)) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; ++ } + default: + __ssb_dma_not_implemented(dev); + } +@@ -1328,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); + + int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) + { +- struct ssb_chipcommon *cc; + int err; + enum ssb_clkmode mode; + + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto error; +- cc = &bus->chipco; +- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; +- ssb_chipco_set_clockmode(cc, mode); + + #ifdef CONFIG_SSB_DEBUG + bus->powered_up = 1; + #endif ++ ++ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; ++ ssb_chipco_set_clockmode(&bus->chipco, mode); ++ + return 0; + error: + ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); +@@ -1349,6 +1428,37 @@ error: + } + EXPORT_SYMBOL(ssb_bus_powerup); + ++static void ssb_broadcast_value(struct ssb_device *dev, ++ u32 address, u32 data) ++{ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ /* This is used for both, PCI and ChipCommon core, so be careful. */ ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++#endif ++ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ ++} ++ ++void ssb_commit_settings(struct ssb_bus *bus) ++{ ++ struct ssb_device *dev; ++ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; ++#else ++ dev = bus->chipco.dev; ++#endif ++ if (WARN_ON(!dev)) ++ return; ++ /* This forces an update of the cached registers. */ ++ ssb_broadcast_value(dev, 0xFD8, 0); ++} ++EXPORT_SYMBOL(ssb_commit_settings); ++ + u32 ssb_admatch_base(u32 adm) + { + u32 base = 0; +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -1,7 +1,7 @@ + /* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * +- * Copyright (C) 2005-2006 Michael Buesch ++ * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk +@@ -17,6 +17,7 @@ + + #include + #include ++#include + #include + #include + +@@ -167,7 +168,7 @@ err_pci: + } + + /* Get the word-offset for a SSB_SPROM_XXX define. */ +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16)) ++#define SPOFF(offset) ((offset) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ + #define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) +@@ -405,6 +406,46 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.ghz5.a3 = gain; + } + ++/* Revs 4 5 and 8 have partially shared layout */ ++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) ++{ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, ++ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, ++ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, ++ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, ++ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, ++ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, ++ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, ++ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, ++ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, ++ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, ++ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, ++ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, ++ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, ++ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, ++ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, ++ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, ++ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); ++} ++ + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) + { + int i; +@@ -427,10 +468,14 @@ static void sprom_extract_r45(struct ssb + SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { + SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0); + } + SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, + SSB_SPROM4_ANTAVAIL_A_SHIFT); +@@ -470,6 +515,8 @@ static void sprom_extract_r45(struct ssb + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); ++ + /* TODO - get remaining rev 4 stuff needed */ + } + +@@ -560,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ /* Extract FEM info */ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, ++ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ sprom_extract_r458(out, in); ++ + /* TODO - get remaining rev 8 stuff needed */ + } + +@@ -572,37 +644,34 @@ static int sprom_extract(struct ssb_bus + ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); + memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ + memset(out->et1mac, 0xFF, 6); ++ + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: The BCM44XX chip has a stupid revision + * number stored in the SPROM. + * Always extract r1. */ + out->revision = 1; ++ ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); ++ } ++ ++ switch (out->revision) { ++ case 1: ++ case 2: ++ case 3: + sprom_extract_r123(out, in); +- } else if (bus->chip_id == 0x4321) { +- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ +- out->revision = 4; ++ break; ++ case 4: ++ case 5: + sprom_extract_r45(out, in); +- } else { +- switch (out->revision) { +- case 1: +- case 2: +- case 3: +- sprom_extract_r123(out, in); +- break; +- case 4: +- case 5: +- sprom_extract_r45(out, in); +- break; +- case 8: +- sprom_extract_r8(out, in); +- break; +- default: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM" +- " revision %d detected. Will extract" +- " v1\n", out->revision); +- out->revision = 1; +- sprom_extract_r123(out, in); +- } ++ break; ++ case 8: ++ sprom_extract_r8(out, in); ++ break; ++ default: ++ ssb_printk(KERN_WARNING PFX "Unsupported SPROM" ++ " revision %d detected. Will extract" ++ " v1\n", out->revision); ++ out->revision = 1; ++ sprom_extract_r123(out, in); + } + + if (out->boardflags_lo == 0xFFFF) +@@ -616,15 +685,14 @@ static int sprom_extract(struct ssb_bus + static int ssb_pci_sprom_get(struct ssb_bus *bus, + struct ssb_sprom *sprom) + { +- const struct ssb_sprom *fallback; +- int err = -ENOMEM; ++ int err; + u16 *buf; + + if (!ssb_is_sprom_available(bus)) { + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } +- if (bus->chipco.dev) { /* can be unavailible! */ ++ if (bus->chipco.dev) { /* can be unavailable! */ + /* + * get SPROM offset: SSB_SPROM_BASE1 except for + * chipcommon rev >= 31 or chip ID is 0x4312 and +@@ -644,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ + + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) +- goto out; ++ return -ENOMEM; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); +@@ -654,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!buf) +- goto out; ++ return -ENOMEM; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); + if (err) { + /* All CRC attempts failed. + * Maybe there is no SPROM on the device? +- * If we have a fallback, use that. */ +- fallback = ssb_get_fallback_sprom(); +- if (fallback) { +- memcpy(sprom, fallback, sizeof(*sprom)); ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage */ ++ err = ssb_fill_sprom_with_fallback(bus, sprom); ++ if (err) { ++ ssb_printk(KERN_WARNING PFX "WARNING: Using" ++ " fallback SPROM failed (err %d)\n", ++ err); ++ } else { ++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM" ++ " revision %d provided by" ++ " platform.\n", sprom->revision); + err = 0; + goto out_free; + } +@@ -676,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ + + out_free: + kfree(buf); +-out: + return err; + } + + static void ssb_pci_get_boardinfo(struct ssb_bus *bus, + struct ssb_boardinfo *bi) + { +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, +- &bi->vendor); +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, +- &bi->type); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bi->rev); ++ bi->vendor = bus->host_pci->subsystem_vendor; ++ bi->type = bus->host_pci->subsystem_device; ++ bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcihost_wrapper.c +++ b/drivers/ssb/pcihost_wrapper.c -@@ -12,6 +12,7 @@ +@@ -6,12 +6,13 @@ + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi +- * Copyright (c) 2005-2007 Michael Buesch ++ * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. */ #include @@ -332,8 +1578,55 @@ #include +@@ -52,12 +53,13 @@ static int ssb_pcihost_resume(struct pci + # define ssb_pcihost_resume NULL + #endif /* CONFIG_PM */ + +-static int ssb_pcihost_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit ssb_pcihost_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct ssb_bus *ssb; + int err = -ENOMEM; + const char *name; ++ u32 val; + + ssb = kzalloc(sizeof(*ssb), GFP_KERNEL); + if (!ssb) +@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_ + goto err_pci_disable; + pci_set_master(dev); + ++ /* Disable the RETRY_TIMEOUT register (0x41) to keep ++ * PCI Tx retries from interfering with C3 CPU state */ ++ pci_read_config_dword(dev, 0x40, &val); ++ if ((val & 0x0000ff00) != 0) ++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff); ++ + err = ssb_bus_pcibus_register(ssb, dev); + if (err) + goto err_pci_release_regions; +@@ -102,7 +110,7 @@ static void ssb_pcihost_remove(struct pc + pci_set_drvdata(dev, NULL); + } + +-int ssb_pcihost_register(struct pci_driver *driver) ++int __devinit ssb_pcihost_register(struct pci_driver *driver) + { + driver->probe = ssb_pcihost_probe; + driver->remove = ssb_pcihost_remove; --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co } \ } while (0) @@ -343,10 +1636,7 @@ +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) - { -- tuple_t tuple; -- int res; -- unsigned char buf[32]; ++{ + struct ssb_sprom *sprom = priv; + + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) @@ -362,7 +1652,10 @@ +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) -+{ + { +- tuple_t tuple; +- int res; +- unsigned char buf[32]; + struct ssb_init_invariants *iv = priv; struct ssb_sprom *sprom = &iv->sprom; struct ssb_boardinfo *bi = &iv->boardinfo; @@ -576,7 +1869,7 @@ - GOTO_ERROR_ON(res != 0, "VEN next tpl data"); - } + res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, -+ ssb_pcmcia_do_get_invariants, sprom); ++ ssb_pcmcia_do_get_invariants, iv); + if ((res == 0) || (res == -ENOSPC)) + return 0; @@ -591,7 +1884,38 @@ --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c -@@ -354,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Bus scanning + * +- * Copyright (C) 2005-2007 Michael Buesch ++ * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk +@@ -260,7 +260,10 @@ static int we_support_multiple_80211_cor + #ifdef CONFIG_SSB_PCIHOST + if (bus->bustype == SSB_BUSTYPE_PCI) { + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && +- bus->host_pci->device == 0x4324) ++ ((bus->host_pci->device == 0x4313) || ++ (bus->host_pci->device == 0x431A) || ++ (bus->host_pci->device == 0x4321) || ++ (bus->host_pci->device == 0x4324))) + return 1; + } + #endif /* CONFIG_SSB_PCIHOST */ +@@ -309,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + } else { + if (bus->bustype == SSB_BUSTYPE_PCI) { + bus->chip_id = pcidev_to_chipid(bus->host_pci); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bus->chip_rev); ++ bus->chip_rev = bus->host_pci->revision; + bus->chip_package = 0; + } else { + bus->chip_id = 0x4710; +@@ -354,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus, dev->bus = bus; dev->ops = bus->ops; @@ -600,16 +1924,46 @@ "Core %d found: %s " "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", i, ssb_core_name(dev->id.coreid), +@@ -422,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->pcicore.dev = dev; + #endif /* CONFIG_SSB_DRIVER_PCICORE */ + break; ++ case SSB_DEV_ETHERNET: ++ if (bus->bustype == SSB_BUSTYPE_PCI) { ++ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && ++ (bus->host_pci->device & 0xFF00) == 0x4300) { ++ /* This is a dangling ethernet core on a ++ * wireless device. Ignore it. */ ++ continue; ++ } ++ } ++ break; + default: + break; + } --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c -@@ -14,6 +14,7 @@ +@@ -2,7 +2,7 @@ + * Sonics Silicon Backplane + * Common SPROM support routines + * +- * Copyright (C) 2005-2008 Michael Buesch ++ * Copyright (C) 2005-2008 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk +@@ -14,9 +14,10 @@ #include "ssb_private.h" #include +#include - static const struct ssb_sprom *fallback_sprom; +-static const struct ssb_sprom *fallback_sprom; ++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out); + + + static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, @@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ u16 *sprom; int res = 0, err = -ENOMEM; @@ -639,9 +1993,88 @@ if (err) ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); out_unlock: +@@ -148,36 +145,43 @@ out: + } + + /** +- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. +- * +- * @sprom: The SPROM data structure to register. ++ * ssb_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. + * +- * With this function the architecture implementation may register a fallback +- * SPROM data structure. The fallback is only used for PCI based SSB devices, +- * where no valid SPROM can be found in the shadow registers. ++ * @sprom_callback: The callback function. + * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * only used for PCI based SSB devices, where no valid SPROM can be found ++ * in the shadow registers. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * SSB device hardwired to their PCI bus. ++ * ++ * Note that it does only work with PCI attached SSB devices. PCMCIA ++ * devices currently don't use this fallback. ++ * Architectures must provide the SPROM for native SSB devices anyway, so ++ * the fallback also isn't used for native devices. + * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. +- * +- * This function is available for architecture code, only. So it is not exported. ++ * This function is available for architecture code, only. So it is not ++ * exported. + */ +-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom) ++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, ++ struct ssb_sprom *out)) + { +- if (fallback_sprom) ++ if (get_fallback_sprom) + return -EEXIST; +- fallback_sprom = sprom; ++ get_fallback_sprom = sprom_callback; + + return 0; + } + +-const struct ssb_sprom *ssb_get_fallback_sprom(void) ++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out) + { +- return fallback_sprom; ++ if (!get_fallback_sprom) ++ return -ENOENT; ++ ++ return get_fallback_sprom(bus, out); + } + + /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ +@@ -188,7 +192,7 @@ bool ssb_is_sprom_available(struct ssb_b + /* this routine differs from specs as we do not access SPROM directly + on PCMCIA */ + if (bus->bustype == SSB_BUSTYPE_PCI && +- bus->chipco.dev && /* can be unavailible! */ ++ bus->chipco.dev && /* can be unavailable! */ + bus->chipco.dev->id.revision >= 31) + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; + --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h -@@ -176,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f +@@ -171,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + const char *buf, size_t count, + int (*sprom_check_crc)(const u16 *sprom, size_t size), + int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); +-extern const struct ssb_sprom *ssb_get_fallback_sprom(void); ++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, ++ struct ssb_sprom *out); + /* core.c */ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); @@ -672,7 +2105,7 @@ static inline int b43_pci_ssb_bridge_init(void) { return 0; -@@ -196,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini +@@ -196,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini static inline void b43_pci_ssb_bridge_exit(void) { } @@ -682,7 +2115,78 @@ #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -269,7 +269,8 @@ struct ssb_bus { +@@ -25,8 +25,10 @@ struct ssb_sprom { + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ +- u8 board_rev; /* Board revision number from SPROM. */ ++ u16 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ ++ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; +@@ -55,6 +57,10 @@ struct ssb_sprom { + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 txpid2g[4]; /* 2GHz TX power index */ ++ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ ++ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ ++ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ + u8 rxpo2g; /* 2GHz RX power offset */ + u8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ +@@ -88,6 +94,15 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz5; ++ } fem; ++ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + +@@ -95,7 +110,7 @@ struct ssb_sprom { + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u16 rev; ++ u8 rev; + }; + + +@@ -167,7 +182,7 @@ struct ssb_device { + * is an optimization. */ + const struct ssb_bus_ops *ops; + +- struct device *dev; ++ struct device *dev, *dma_dev; + + struct ssb_bus *bus; + struct ssb_device_id id; +@@ -225,10 +240,9 @@ struct ssb_driver { + #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + + extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +-static inline int ssb_driver_register(struct ssb_driver *drv) +-{ +- return __ssb_driver_register(drv, THIS_MODULE); +-} ++#define ssb_driver_register(drv) \ ++ __ssb_driver_register(drv, THIS_MODULE) ++ + extern void ssb_driver_unregister(struct ssb_driver *drv); + + +@@ -269,7 +283,8 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -692,7 +2196,7 @@ struct ssb_device *mapped_device; union { /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -@@ -281,14 +282,17 @@ struct ssb_bus { +@@ -281,14 +296,17 @@ struct ssb_bus { * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock; @@ -717,9 +2221,90 @@ /* See enum ssb_quirks */ unsigned int quirks; +@@ -300,7 +318,7 @@ struct ssb_bus { + + /* ID information about the Chip. */ + u16 chip_id; +- u16 chip_rev; ++ u8 chip_rev; + u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; +@@ -396,7 +414,9 @@ extern bool ssb_is_sprom_available(struc + + /* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); ++extern int ssb_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct ssb_bus *bus, ++ struct ssb_sprom *out)); + + /* Suspend a SSB bus. + * Call this from the parent bus suspend routine. */ +@@ -667,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct + * Otherwise static always-on powercontrol will be used. */ + extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); + ++extern void ssb_commit_settings(struct ssb_bus *bus); + + /* Various helper functions */ + extern u32 ssb_admatch_base(u32 adm); --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -198,63 +198,63 @@ +@@ -85,6 +85,8 @@ + #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */ + #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */ + #define SSB_IMSTATE_TO 0x00040000 /* Timeout */ ++#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */ ++#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */ + #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ + #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ + #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ +@@ -95,7 +97,7 @@ + #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ + #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ + #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ +-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ ++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ + #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ + #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ + #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ +@@ -172,25 +174,25 @@ + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) + #define SSB_SPROM_BASE1 0x1000 + #define SSB_SPROM_BASE31 0x0800 +-#define SSB_SPROM_REVISION 0x107E ++#define SSB_SPROM_REVISION 0x007E + #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ + #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ + #define SSB_SPROM_REVISION_CRC_SHIFT 8 + + /* SPROM Revision 1 */ +-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ ++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ ++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ ++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ ++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ ++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ ++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ + #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM1_BINF 0x105C /* Board info */ ++#define SSB_SPROM1_BINF 0x005C /* Board info */ + #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ + #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ + #define SSB_SPROM1_BINF_CCODE_SHIFT 8 +@@ -198,63 +200,63 @@ #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ #define SSB_SPROM1_BINF_ANTA_SHIFT 14 @@ -811,7 +2396,7 @@ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -265,100 +265,100 @@ +@@ -265,100 +267,144 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ @@ -819,6 +2404,8 @@ -#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ ++#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */ +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ @@ -861,6 +2448,46 @@ #define SSB_SPROM4_AGAIN3_SHIFT 8 -#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ -#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */ ++#define SSB_SPROM4_TXPID2G0 0x00FF ++#define SSB_SPROM4_TXPID2G0_SHIFT 0 ++#define SSB_SPROM4_TXPID2G1 0xFF00 ++#define SSB_SPROM4_TXPID2G1_SHIFT 8 ++#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */ ++#define SSB_SPROM4_TXPID2G2 0x00FF ++#define SSB_SPROM4_TXPID2G2_SHIFT 0 ++#define SSB_SPROM4_TXPID2G3 0xFF00 ++#define SSB_SPROM4_TXPID2G3_SHIFT 8 ++#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */ ++#define SSB_SPROM4_TXPID5G0 0x00FF ++#define SSB_SPROM4_TXPID5G0_SHIFT 0 ++#define SSB_SPROM4_TXPID5G1 0xFF00 ++#define SSB_SPROM4_TXPID5G1_SHIFT 8 ++#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */ ++#define SSB_SPROM4_TXPID5G2 0x00FF ++#define SSB_SPROM4_TXPID5G2_SHIFT 0 ++#define SSB_SPROM4_TXPID5G3 0xFF00 ++#define SSB_SPROM4_TXPID5G3_SHIFT 8 ++#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */ ++#define SSB_SPROM4_TXPID5GL0 0x00FF ++#define SSB_SPROM4_TXPID5GL0_SHIFT 0 ++#define SSB_SPROM4_TXPID5GL1 0xFF00 ++#define SSB_SPROM4_TXPID5GL1_SHIFT 8 ++#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */ ++#define SSB_SPROM4_TXPID5GL2 0x00FF ++#define SSB_SPROM4_TXPID5GL2_SHIFT 0 ++#define SSB_SPROM4_TXPID5GL3 0xFF00 ++#define SSB_SPROM4_TXPID5GL3_SHIFT 8 ++#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */ ++#define SSB_SPROM4_TXPID5GH0 0x00FF ++#define SSB_SPROM4_TXPID5GH0_SHIFT 0 ++#define SSB_SPROM4_TXPID5GH1 0xFF00 ++#define SSB_SPROM4_TXPID5GH1_SHIFT 8 ++#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */ ++#define SSB_SPROM4_TXPID5GH2 0x00FF ++#define SSB_SPROM4_TXPID5GH2_SHIFT 0 ++#define SSB_SPROM4_TXPID5GH3 0xFF00 ++#define SSB_SPROM4_TXPID5GH3_SHIFT 8 +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -900,6 +2527,8 @@ +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */ ++#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */ +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ @@ -969,7 +2598,7 @@ #define SSB_SPROM8_RSSISMF2G 0x000F #define SSB_SPROM8_RSSISMC2G 0x00F0 #define SSB_SPROM8_RSSISMC2G_SHIFT 4 -@@ -366,7 +366,7 @@ +@@ -366,7 +412,7 @@ #define SSB_SPROM8_RSSISAV2G_SHIFT 8 #define SSB_SPROM8_BXA2G 0x1800 #define SSB_SPROM8_BXA2G_SHIFT 11 @@ -978,7 +2607,7 @@ #define SSB_SPROM8_RSSISMF5G 0x000F #define SSB_SPROM8_RSSISMC5G 0x00F0 #define SSB_SPROM8_RSSISMC5G_SHIFT 4 -@@ -374,47 +374,47 @@ +@@ -374,47 +420,104 @@ #define SSB_SPROM8_RSSISAV5G_SHIFT 8 #define SSB_SPROM8_BXA5G 0x1800 #define SSB_SPROM8_BXA5G_SHIFT 11 @@ -998,6 +2627,23 @@ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_FEM2G 0x00AE ++#define SSB_SPROM8_FEM5G 0x00B0 ++#define SSB_SROM8_FEM_TSSIPOS 0x0001 ++#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0 ++#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006 ++#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1 ++#define SSB_SROM8_FEM_PDET_RANGE 0x00F8 ++#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3 ++#define SSB_SROM8_FEM_TR_ISO 0x0700 ++#define SSB_SROM8_FEM_TR_ISO_SHIFT 8 ++#define SSB_SROM8_FEM_ANTSWLUT 0xF800 ++#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 ++#define SSB_SPROM8_THERMAL 0x00B2 ++#define SSB_SPROM8_MPWR_RAWTS 0x00B4 ++#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -1046,6 +2692,139 @@ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ ++ ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ ++#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ ++#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ ++#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ ++#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ ++#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ ++#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ ++#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ ++#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ ++#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ ++#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ ++#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ ++#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ ++#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ ++ ++/* Values for boardflags_hi read from SPROM */ ++#define SSB_BFH_NOPA 0x0001 /* has no PA */ ++#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ ++#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ ++#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ ++#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ ++#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ ++#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ ++ ++/* Values for boardflags2_lo read from SPROM */ ++#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ ++#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ ++#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ ++#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ ++#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ ++#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ ++#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ ++#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ ++#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ ++#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ ++#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -8,7 +8,7 @@ + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, Michael Buesch ++ * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ +@@ -123,6 +123,8 @@ + #define SSB_CHIPCO_FLASHDATA 0x0048 + #define SSB_CHIPCO_BCAST_ADDR 0x0050 + #define SSB_CHIPCO_BCAST_DATA 0x0054 ++#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ ++#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ + #define SSB_CHIPCO_GPIOIN 0x0060 + #define SSB_CHIPCO_GPIOOUT 0x0064 + #define SSB_CHIPCO_GPIOOUTEN 0x0068 +@@ -131,6 +133,9 @@ + #define SSB_CHIPCO_GPIOIRQ 0x0074 + #define SSB_CHIPCO_WATCHDOG 0x0080 + #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ ++#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF ++#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0 ++#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000 + #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 + #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ + #define SSB_CHIPCO_CLOCK_N 0x0090 +@@ -189,8 +194,10 @@ + #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ + #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ + #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */ ++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ ++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ + #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define SSB_CHIPCO_UART0_DATA 0x0300 + #define SSB_CHIPCO_UART0_IMR 0x0304 +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch ++ * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include ++#include + #include + + #include "ssb_private.h" +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch ++ * Copyright 2006-2008, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg +- * Copyright 2007-2008 Michael Buesch ++ * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + *