X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/f8d8046b51814c906bfca0722b84cda5a9fafc0b..5e588d2fdb9bb6fc8f64b6a098fa6212e56848ca:/target/linux/lantiq/base-files/etc/uci-defaults/network

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/network b/target/linux/lantiq/base-files/etc/uci-defaults/network
index 09f6bd7bf..94dea9a24 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/network
@@ -1,51 +1,9 @@
 #!/bin/sh
 #
-# Copyright (C) 2011 OpenWrt.org
+# Copyright (C) 2011-2012 OpenWrt.org
 #
 
-set_interface_loopback() {
-	uci batch <<EOF
-set network.loopback='interface'
-set network.loopback.ifname='lo'
-set network.loopback.proto='static'
-set network.loopback.ipaddr='127.0.0.1'
-set network.loopback.netmask='255.0.0.0'
-EOF
-}
-
-set_interface_raw() {
-	local cfg=$1
-	local ifname=$2
-
-	uci batch <<EOF
-set network.$cfg='interface'
-set network.$cfg.ifname='$ifname'
-set network.$cfg.proto='none'
-EOF
-}
-
-set_interface_lan() {
-	local ifname=$1
-
-	uci batch <<EOF
-set network.lan='interface'
-set network.lan.ifname='$ifname'
-set network.lan.type='bridge'
-set network.lan.proto='static'
-set network.lan.ipaddr='192.168.1.1'
-set network.lan.netmask='255.255.255.0'
-EOF
-}
-
-set_interface_wan() {
-	local ifname=$1
-
-	uci batch <<EOF
-set network.wan='interface'
-set network.wan.ifname='$ifname'
-set network.wan.proto='dhcp'
-EOF
-}
+[ -e /etc/config/network ] && exit 0
 
 set_atm_wan() {
 	local vpi=$1
@@ -59,8 +17,6 @@ set network.atm.vpi='$vpi'
 set network.atm.vci='$vci'
 set network.atm.encaps='$encaps'
 set network.atm.payload='$payload'
-set network.atm.fwannex='$annex'
-set network.atm.annex='$annex'
 set network.wan='interface'
 set network.wan.ifname='nas0'
 set network.wan.proto='pppoe'
@@ -79,72 +35,45 @@ set network.adsl.annex='$annex'
 EOF
 }
 
-set_interfaces_lan_wan() {
-	local lan_ifname=$1
-	local wan_ifname=$2
-
-	set_interface_lan "$lan_ifname"
-	set_interface_wan "$wan_ifname"
-}
-
-add_switch() {
-	local name=$1
-	local reset=$2
-	local enable=$3
-	uci batch <<EOF
-add network switch
-set network.@switch[-1].name='$name'
-set network.@switch[-1].reset='$reset'
-set network.@switch[-1].enable_vlan='$enable'
-EOF
-}
-
-add_switch_vlan() {
-	local device=$1
-	local vlan=$2
-	local ports=$3
-	uci batch <<EOF
-add network switch_vlan
-set network.@switch_vlan[-1].device='$device'
-set network.@switch_vlan[-1].vlan='$vlan'
-set network.@switch_vlan[-1].ports='$ports'
-EOF
-}
-
-[ -e /etc/config/network ] && exit 0
-
+. /lib/functions/uci-defaults.sh
 . /lib/lantiq.sh
 
 touch /etc/config/network
 
-set_interface_loopback
-set_interface_lan 'eth0'
-
+ucidef_set_interface_loopback
+ucidef_set_interface_lan 'eth0'
 
 vpi=1
 vci=32
 encaps="llc"
 payload="bridged"
 fwannex=$(lantiq_dsl_fwannex)
-annex="$fwannex"
-
 board=$(lantiq_board_name)
+dsl=$(lantiq_soc_has_adsl)
+
 case "$board" in
-GIGASX76X)
-	set_interface_lan "eth0.1"
-	add_switch "eth0" "1" "1"
-	add_switch_vlan "eth0" "1" "1 2 3 4 5t"
+# annex B with adm6996
+ARV4520PW|GIGASX76X)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "1 2 3 4 5t"
+	set_adsl "b" "b2p"
 	;;
 
-*)
-	# custom foo goes here
-	true
+# annex A with ar8316
+ARV4519PW|ARV7518PW)
+	ucidef_set_interface_lan "eth0.1"
+	ucidef_add_switch "eth0" "1" "1"
+	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
+	set_adsl "a" "a2p"
+	;;
+
+ARV7525PW|ARV4525PW|*)
+	set_adsl "$fwannex" "${fwannex}2p"
 	;;
 esac
 
-dsl=$(lantiq_soc_has_adsl)
-[ -z "$dsl" ] || set_atm_wan "$vpi" "vci" "$encaps" "$payload" "$annex"
-[ -z "$fwannex" ] || set_adsl "$fwannex" "$annex"
+[ -z "$dsl" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
 
 uci commit network