X-Git-Url: http://git.rohieb.name/openwrt.git/blobdiff_plain/fb189822fcab111e55d1c7e83c482dc2c144500a..a0d848ed9dde978ad40ef8b752ff2d651c00091b:/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c?ds=sidebyside

diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
index 956be5717..b728c8745 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
@@ -11,34 +11,57 @@
  */
 
 #include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
 #include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/spinlock.h>
 #include <linux/workqueue.h>
+#include <linux/crc7.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/glamo.h>
 
-#include <asm/dma.h>
-#include <asm/dma-mapping.h>
-#include <asm/io.h>
-
-#include "glamo-mci.h"
 #include "glamo-core.h"
 #include "glamo-regs.h"
 
-/* from glamo-core.c */
-extern struct glamo_mci_pdata glamo_mci_def_pdata;
+#define DRIVER_NAME "glamo-mci"
 
-static spinlock_t clock_lock;
+struct glamo_mci_host {
+	struct glamo_mmc_platform_data *pdata;
+	struct platform_device *pdev;
+	struct glamo_core      *core;
+	struct mmc_host        *mmc;
+	struct resource        *mmio_mem;
+	struct resource        *data_mem;
+	void __iomem           *mmio_base;
+	u16 __iomem            *data_base;
 
-#define DRIVER_NAME "glamo-mci"
-#define RESSIZE(ressource) (((ressource)->end - (ressource)->start) + 1)
+	struct regulator *regulator;
+	struct mmc_request *mrq;
+
+	unsigned int clk_rate;
 
-static void glamo_mci_send_request(struct mmc_host *mmc);
+	unsigned short vdd;
+	char           power_mode;
+
+	unsigned char request_counter;
+
+	struct timer_list disable_timer;
+
+	struct work_struct irq_work;
+	struct work_struct read_work;
+
+	unsigned clk_enabled : 1;
+
+};
+
+static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request* mrq);
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+				  struct mmc_command *cmd);
 
 /*
  * Max SD clock rate
@@ -53,7 +76,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc);
  * for example
  */
 
-static int sd_max_clk = 50000000 / 3;
+static int sd_max_clk = 21000000;
 module_param(sd_max_clk, int, 0644);
 
 /*
@@ -90,362 +113,246 @@ static int sd_post_power_clock = 1000000;
 module_param(sd_post_power_clock, int, 0644);
 
 
-/*
- * SD Signal drive strength
- *
- * you can override this on kernel commandline using
- *
- *   glamo_mci.sd_drive=0
- *
- * for example
- */
-
-static int sd_drive;
-module_param(sd_drive, int, 0644);
-
-/*
- * SD allow SD clock to run while idle
- *
- * you can override this on kernel commandline using
- *
- *   glamo_mci.sd_idleclk=0
- *
- * for example
- */
-
-static int sd_idleclk = 0; /* disallow idle clock by default */
-module_param(sd_idleclk, int, 0644);
-
-/* used to stash real idleclk state in suspend: we force it to run in there */
-static int suspend_sd_idleclk;
-
-
-unsigned char CRC7(u8 * pu8, int cnt)
+static inline void glamo_reg_write(struct glamo_mci_host *glamo,
+				u_int16_t reg, u_int16_t val)
 {
-	u8 crc = 0;
-
-	while (cnt--) {
-		int n;
-		u8 d = *pu8++;
-		for (n = 0; n < 8; n++) {
-			crc <<= 1;
-			if ((d & 0x80) ^ (crc & 0x80))
-				crc ^= 0x09;
-			d <<= 1;
-		}
-	}
-	return (crc << 1) | 1;
+	writew(val, glamo->mmio_base + reg);
 }
 
-static int get_data_buffer(struct glamo_mci_host *host,
-			   volatile u32 *words, volatile u16 **pointer)
+static inline u_int16_t glamo_reg_read(struct glamo_mci_host *glamo,
+				   u_int16_t reg)
 {
-	struct scatterlist *sg;
+	return readw(glamo->mmio_base + reg);
+}
 
-	*words = 0;
-	*pointer = NULL;
+static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo,
+				u_int16_t reg, u_int16_t mask,
+				u_int16_t val)
+{
+	u_int16_t tmp;
 
-	if (host->pio_active == XFER_NONE)
-		return -EINVAL;
+	val &= mask;
 
-	if ((!host->mrq) || (!host->mrq->data))
-		return -EINVAL;
+	tmp = glamo_reg_read(glamo, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	glamo_reg_write(glamo, reg, tmp);
+}
 
-	if (host->pio_sgptr >= host->mrq->data->sg_len) {
-		dev_dbg(&host->pdev->dev, "no more buffers (%i/%i)\n",
-		      host->pio_sgptr, host->mrq->data->sg_len);
-		return -EBUSY;
+static void glamo_mci_clock_disable(struct glamo_mci_host *host) {
+	if (host->clk_enabled) {
+		glamo_engine_div_disable(host->core, GLAMO_ENGINE_MMC);
+		host->clk_enabled = 0;
 	}
-	sg = &host->mrq->data->sg[host->pio_sgptr];
-
-	*words = sg->length >> 1; /* we are working with a 16-bit data bus */
-	*pointer = page_address(sg_page(sg)) + sg->offset;
-
-	BUG_ON(((long)(*pointer)) & 1);
+}
 
-	host->pio_sgptr++;
+static void glamo_mci_clock_enable(struct glamo_mci_host *host) {
+	del_timer_sync(&host->disable_timer);
 
-	/* dev_info(&host->pdev->dev, "new buffer (%i/%i)\n",
-	      host->pio_sgptr, host->mrq->data->sg_len); */
-	return 0;
+	if (!host->clk_enabled) {
+		glamo_engine_div_enable(host->core, GLAMO_ENGINE_MMC);
+		host->clk_enabled = 1;
+	}
 }
 
-static void do_pio_read(struct glamo_mci_host *host)
-{
-	int res;
-	u16 __iomem *from_ptr = host->base_data + (RESSIZE(host->mem_data) /
-							      sizeof(u16) / 2);
-#ifdef DEBUG
-	u16 * block;
-#endif
+static void glamo_mci_disable_timer(unsigned long data) {
+	struct glamo_mci_host *host = (struct glamo_mci_host *)data;
+	glamo_mci_clock_disable(host);
+}
 
-	while (1) {
-		res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
-		if (res) {
-			host->pio_active = XFER_NONE;
-			host->complete_what = COMPLETION_FINALIZE;
 
-			dev_dbg(&host->pdev->dev, "pio_read(): "
-				"complete (no more data).\n");
-			return;
-		}
+static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+{
+	struct scatterlist *sg;
+	u16 __iomem *from_ptr = host->data_base;
+	void *sg_pointer;
 
-		dev_dbg(&host->pdev->dev, "pio_read(): host->pio_words: %d\n",
-				host->pio_words);
+	dev_dbg(&host->pdev->dev, "pio_read():\n");
+	for (sg = data->sg; sg; sg = sg_next(sg)) {
+		sg_pointer = page_address(sg_page(sg)) + sg->offset;
 
-		host->pio_count += host->pio_words << 1;
 
-#ifdef DEBUG
-		block = (u16 *)host->pio_ptr;
-		res = host->pio_words << 1;
-#endif
-#if 0
-		/* u16-centric memcpy */
-		while (host->pio_words--)
-			*host->pio_ptr++ = *from_ptr++;
-#else
-		/* memcpy can be faster? */
-		memcpy((void *)host->pio_ptr, from_ptr, host->pio_words << 1);
-		host->pio_ptr += host->pio_words;
-#endif
+		memcpy(sg_pointer, from_ptr, sg->length);
+		from_ptr += sg->length >> 1;
 
-#ifdef DEBUG
-		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
-			       (void *)block, res, 1);
-#endif
+		data->bytes_xfered += sg->length;
 	}
+
+	dev_dbg(&host->pdev->dev, "pio_read(): "
+			"complete (no more data).\n");
 }
 
-static int do_pio_write(struct glamo_mci_host *host)
+static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
 {
-	int res = 0;
-	volatile u16 __iomem *to_ptr = host->base_data;
-	int err = 0;
+	struct scatterlist *sg;
+	u16 __iomem *to_ptr = host->data_base;
+	void *sg_pointer;
 
 	dev_dbg(&host->pdev->dev, "pio_write():\n");
-	while (!res) {
-		res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
-		if (res)
-			continue;
+	for (sg = data->sg; sg; sg = sg_next(sg)) {
+		sg_pointer = page_address(sg_page(sg)) + sg->offset;
 
-		dev_dbg(&host->pdev->dev, "pio_write():new source: [%i]@[%p]\n",
-			host->pio_words, host->pio_ptr);
+		data->bytes_xfered += sg->length;
 
-		host->pio_count += host->pio_words << 1;
-		while (host->pio_words--)
-			writew(*host->pio_ptr++, to_ptr++);
+		memcpy(to_ptr, sg_pointer, sg->length);
+		to_ptr += sg->length >> 1;
 	}
 
 	dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
-	host->pio_active = XFER_NONE;
-	return err;
-}
-
-static void __glamo_mci_fix_card_div(struct glamo_mci_host *host, int div)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clock_lock, flags);
-
-	if (div < 0) {
-		/* stop clock - remove clock from divider input */
-		writew(readw(glamo_mci_def_pdata.pglamo->base +
-		     GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
-		     glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
-
-		goto done;
-	} else {
-		/* set the nearest prescaler factor
-		*
-		* register shared with SCLK divisor -- no chance of race because
-		* we don't use sensor interface
-		*/
-		writew((readw(glamo_mci_def_pdata.pglamo->base +
-				GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
-		       glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
-		/* enable clock to divider input */
-		writew(readw(glamo_mci_def_pdata.pglamo->base +
-			GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
-		     glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
-	}
-
-	if (host->force_slow_during_powerup)
-		div = host->clk_rate / sd_post_power_clock;
-	else
-		if (host->pdata->glamo_mci_use_slow)
-			if ((host->pdata->glamo_mci_use_slow)())
-				div = div * sd_slow_ratio;
-
-	if (div > 255)
-		div = 255;
-
-	/*
-	 * set the nearest prescaler factor
-	 *
-	 * register shared with SCLK divisor -- no chance of race because
-	 * we don't use sensor interface
-	 */
-	writew((readw(glamo_mci_def_pdata.pglamo->base +
-			GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
-		glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN8);
-	/* enable clock to divider input */
-	writew(readw(glamo_mci_def_pdata.pglamo->base +
-		GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
-		glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_GEN5_1);
-
-done:
-	spin_unlock_irqrestore(&clock_lock, flags);
 }
 
-static int __glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq,
-								  int *division)
+static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
 {
-	int div = 0;
 	int real_rate = 0;
 
 	if (freq) {
-		/* Set clock */
-		for (div = 0; div < 256; div++) {
-			real_rate = host->clk_rate / (div + 1);
-			if (real_rate <= freq)
-				break;
-		}
-		if (div > 255)
-			div = 255;
-
-		if (division)
-			*division = div;
-
-		__glamo_mci_fix_card_div(host, div);
-
+		glamo_mci_clock_enable(host);
+		real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC, freq);
 	} else {
-		/* stop clock */
-		if (division)
-			*division = 0xff;
-
-		if (!sd_idleclk && !host->force_slow_during_powerup)
-			/* clock off */
-			__glamo_mci_fix_card_div(host, -1);
+		glamo_mci_clock_disable(host);
 	}
 
 	return real_rate;
 }
 
+static void glamo_mci_request_done(struct glamo_mci_host *host, struct
+mmc_request *mrq) {
+	mod_timer(&host->disable_timer, jiffies + HZ / 16);
+	mmc_request_done(host->mmc, mrq);
+}
+
 
 static void glamo_mci_irq_worker(struct work_struct *work)
 {
-	struct glamo_mci_host *host =
-			    container_of(work, struct glamo_mci_host, irq_work);
-	struct mmc_command *cmd = host->mrq->cmd;
+	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+												irq_work);
+	struct mmc_command *cmd;
+	uint16_t status;
+	if (!host->mrq || !host->mrq->cmd)
+		return;
 
-	if (host->pio_active == XFER_READ)
-		do_pio_read(host);
+	cmd = host->mrq->cmd;
 
-	host->mrq->data->bytes_xfered = host->pio_count;
-	dev_dbg(&host->pdev->dev, "count=%d\n", host->pio_count);
+#if 0
+	if (cmd->data->flags & MMC_DATA_READ) {
+		return;
+	}
+#endif
+
+	status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
+
+	/* we ignore a data timeout report if we are also told the data came */
+	if (status & GLAMO_STAT1_MMC_RB_DRDY)
+		status &= ~GLAMO_STAT1_MMC_DTOUT;
+
+	if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+		cmd->error = -ETIMEDOUT;
+	if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
+		cmd->error = -EILSEQ;
+	}
+	if (cmd->error) {
+		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+		goto done;
+	}
 
 	/* issue STOP if we have been given one to use */
 	if (host->mrq->stop) {
-		host->cmd_is_stop = 1;
-		glamo_mci_send_request(host->mmc);
-		host->cmd_is_stop = 0;
+		glamo_mci_send_command(host, host->mrq->stop);
 	}
 
-	if (!sd_idleclk && !host->force_slow_during_powerup)
-		/* clock off */
-		__glamo_mci_fix_card_div(host, -1);
+	if (cmd->data->flags & MMC_DATA_READ)
+		do_pio_read(host, cmd->data);
 
-	host->complete_what = COMPLETION_NONE;
+done:
 	host->mrq = NULL;
-	mmc_request_done(host->mmc, cmd->mrq);
+	glamo_mci_request_done(host, cmd->mrq);
 }
 
-static void glamo_mci_irq_host(struct glamo_mci_host *host)
+static void glamo_mci_read_worker(struct work_struct *work)
 {
-	u16 status;
+	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+												read_work);
 	struct mmc_command *cmd;
-	unsigned long iflags;
+	uint16_t status;
+	uint16_t blocks_ready;
+	size_t data_read = 0;
+	size_t data_ready;
+	struct scatterlist *sg;
+	u16 __iomem *from_ptr = host->data_base;
+	void *sg_pointer;
 
-	if (host->suspending) { /* bad news, dangerous time */
-		dev_err(&host->pdev->dev, "****glamo_mci_irq before resumed\n");
-		return;
-	}
 
-	if (!host->mrq)
-		return;
 	cmd = host->mrq->cmd;
-	if (!cmd)
-		return;
+	sg = cmd->data->sg;
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+
+		if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+			cmd->error = -ETIMEDOUT;
+		if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
+			cmd->error = -EILSEQ;
+		if (cmd->error) {
+			dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+			goto done;
+		}
 
-	spin_lock_irqsave(&host->complete_lock, iflags);
+		blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT);
+		data_ready = blocks_ready * cmd->data->blksz;
 
-	status = readw(host->base + GLAMO_REG_MMC_RB_STAT1);
-	dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
+		if (data_ready == data_read)
+			yield();
 
-	/* ack this interrupt source */
-	writew(GLAMO_IRQ_MMC,
-	       glamo_mci_def_pdata.pglamo->base + GLAMO_REG_IRQ_CLEAR);
-
-	/* we ignore a data timeout report if we are also told the data came */
-	if (status & GLAMO_STAT1_MMC_RB_DRDY)
-		status &= ~GLAMO_STAT1_MMC_DTOUT;
+		while(sg && data_read + sg->length <= data_ready) {
+			sg_pointer = page_address(sg_page(sg)) + sg->offset;
+			memcpy(sg_pointer, from_ptr, sg->length);
+			from_ptr += sg->length >> 1;
 
-	if (status & (GLAMO_STAT1_MMC_RTOUT |
-		      GLAMO_STAT1_MMC_DTOUT))
-		cmd->error = -ETIMEDOUT;
-	if (status & (GLAMO_STAT1_MMC_BWERR |
-		      GLAMO_STAT1_MMC_BRERR))
-		cmd->error = -EILSEQ;
-	if (cmd->error) {
-		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
-		goto done;
-	}
+			data_read += sg->length;
+			sg = sg_next(sg);
+		}
 
-	/*
-	 * disable the initial slow start after first bulk transfer
-	 */
-	if (host->force_slow_during_powerup)
-		host->force_slow_during_powerup--;
+	} while(sg);
+	cmd->data->bytes_xfered = data_read;
 
-	/*
-	 * we perform the memcpy out of Glamo memory outside of IRQ context
-	 * so we don't block other interrupts
-	 */
-	schedule_work(&host->irq_work);
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	} while (!(status & GLAMO_STAT1_MMC_IDLE));
 
-	goto leave;
+	if (host->mrq->stop)
+		glamo_mci_send_command(host, host->mrq->stop);
 
+	do {
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	} while (!(status & GLAMO_STAT1_MMC_IDLE));
 done:
-	host->complete_what = COMPLETION_NONE;
 	host->mrq = NULL;
-	mmc_request_done(host->mmc, cmd->mrq);
-leave:
-	spin_unlock_irqrestore(&host->complete_lock, iflags);
+	glamo_mci_request_done(host, cmd->mrq);
 }
 
-static void glamo_mci_irq(unsigned int irq, struct irq_desc *desc)
+static irqreturn_t glamo_mci_irq(int irq, void *devid)
 {
-	struct glamo_mci_host *host = (struct glamo_mci_host *)
-				      desc->handler_data;
-
-	if (host)
-		glamo_mci_irq_host(host);
+	struct glamo_mci_host *host = (struct glamo_mci_host*)devid;
+	schedule_work(&host->irq_work);
 
+	return IRQ_HANDLED;
 }
 
-static int glamo_mci_send_command(struct glamo_mci_host *host,
+static void glamo_mci_send_command(struct glamo_mci_host *host,
 				  struct mmc_command *cmd)
 {
 	u8 u8a[6];
 	u16 fire = 0;
+	unsigned int timeout = 1000000;
+	u16 * reg_resp = (u16 *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
+	u16 status;
+	int triggers_int = 1;
 
 	/* if we can't do it, reject as busy */
-	if (!readw(host->base + GLAMO_REG_MMC_RB_STAT1) &
-	     GLAMO_STAT1_MMC_IDLE) {
-		host->mrq = NULL;
+	if (!glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
+		 GLAMO_STAT1_MMC_IDLE) {
 		cmd->error = -EBUSY;
-		mmc_request_done(host->mmc, host->mrq);
-		return -EBUSY;
+		return;
 	}
 
 	/* create an array in wire order for CRC computation */
@@ -454,15 +361,15 @@ static int glamo_mci_send_command(struct glamo_mci_host *host,
 	u8a[2] = (u8)(cmd->arg >> 16);
 	u8a[3] = (u8)(cmd->arg >> 8);
 	u8a[4] = (u8)cmd->arg;
-	u8a[5] = CRC7(&u8a[0], 5); /* CRC7 on first 5 bytes of packet */
+	u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; /* crc7 on first 5 bytes of packet */
 
 	/* issue the wire-order array including CRC in register order */
-	writew((u8a[4] << 8) | u8a[5], host->base + GLAMO_REG_MMC_CMD_REG1);
-	writew((u8a[2] << 8) | u8a[3], host->base + GLAMO_REG_MMC_CMD_REG2);
-	writew((u8a[0] << 8) | u8a[1], host->base + GLAMO_REG_MMC_CMD_REG3);
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));
 
 	/* command index toggle */
-	fire |= (host->ccnt & 1) << 12;
+	fire |= (host->request_counter & 1) << 12;
 
 	/* set type of command */
 	switch (mmc_cmd_type(cmd)) {
@@ -493,7 +400,7 @@ static int glamo_mci_send_command(struct glamo_mci_host *host,
 	 *                     check pattern, CRC7)
 	 */
 	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_R6: /* same index as R7 and R1 */
+	case MMC_RSP_R1: /* same index as R6 and R7 */
 		fire |= GLAMO_FIRE_MMC_RSPT_R1;
 		break;
 	case MMC_RSP_R1B:
@@ -519,7 +426,7 @@ static int glamo_mci_send_command(struct glamo_mci_host *host,
 		fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
 		break;
 	case MMC_SWITCH: /* 64 byte payload */
-	case 0x33: /* observed issued by MCI */
+	case SD_APP_SEND_SCR:
 	case MMC_READ_MULTIPLE_BLOCK:
 		/* we will get an interrupt off this */
 		if (!cmd->mrq->stop)
@@ -537,112 +444,156 @@ static int glamo_mci_send_command(struct glamo_mci_host *host,
 			 /* multiblock with stop */
 			fire |= GLAMO_FIRE_MMC_CC_MBWS;
 		else
-// 			 /* multiblock NO stop-- 'RESERVED'? */
+			 /* multiblock NO stop-- 'RESERVED'? */
 			fire |= GLAMO_FIRE_MMC_CC_MBWNS;
 		break;
 	case MMC_STOP_TRANSMISSION:
 		fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
+		triggers_int = 0;
 		break;
 	default:
 		fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
+		triggers_int = 0;
 		break;
 	}
 
+	if (cmd->data)
+		host->mrq = cmd->mrq;
+
 	/* always largest timeout */
-	writew(0xfff, host->base + GLAMO_REG_MMC_TIMEOUT);
+	glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);
 
 	/* Generate interrupt on txfer */
-	writew((readw(host->base + GLAMO_REG_MMC_BASIC) & 0x3e) |
-		   0x0800 | GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
-		   GLAMO_BASIC_MMC_EN_COMPL_INT | (sd_drive << 6),
-		   host->base + GLAMO_REG_MMC_BASIC);
+	glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
+			0x0800 |
+			GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
+			GLAMO_BASIC_MMC_EN_COMPL_INT |
+			GLAMO_BASIC_MMC_EN_DATA_PUPS |
+			GLAMO_BASIC_MMC_EN_CMD_PUP);
 
 	/* send the command out on the wire */
 	/* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
-	writew(fire, host->base + GLAMO_REG_MMC_CMD_FIRE);
-	cmd->error = 0;
-	return 0;
-}
+	glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);
+
+	/* we are deselecting card?  because it isn't going to ack then... */
+	if ((cmd->opcode == 7) && (cmd->arg == 0))
+		return;
 
-static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
-				 struct mmc_data *data)
-{
 	/*
-	 * the S-Media-internal RAM offset for our MMC buffer
-	 * Read is halfway up the buffer and write is at the start
+	 * we must spin until response is ready or timed out
+	 * -- we don't get interrupts unless there is a bulk rx
 	 */
-	if (data->flags & MMC_DATA_READ) {
-		writew((u16)(GLAMO_FB_SIZE + (RESSIZE(host->mem_data) / 2)),
-			   host->base + GLAMO_REG_MMC_WDATADS1);
-		writew((u16)((GLAMO_FB_SIZE +
-					(RESSIZE(host->mem_data) / 2)) >> 16),
-			   host->base + GLAMO_REG_MMC_WDATADS2);
-	} else {
-		writew((u16)GLAMO_FB_SIZE, host->base +
-					       GLAMO_REG_MMC_RDATADS1);
-		writew((u16)(GLAMO_FB_SIZE >> 16), host->base +
-						       GLAMO_REG_MMC_RDATADS2);
+	do
+		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+	while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
+		(!(status & (GLAMO_STAT1_MMC_RB_RRDY |
+				 GLAMO_STAT1_MMC_RTOUT |
+				 GLAMO_STAT1_MMC_DTOUT |
+				 GLAMO_STAT1_MMC_BWERR |
+				 GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
+
+	if ((status & (GLAMO_STAT1_MMC_RTOUT |
+				   GLAMO_STAT1_MMC_DTOUT)) ||
+		(timeout == 0)) {
+		cmd->error = -ETIMEDOUT;
+	} else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
+		cmd->error = -EILSEQ;
 	}
 
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			cmd->resp[3] = readw(&reg_resp[0]) |
+						   (readw(&reg_resp[1]) << 16);
+			cmd->resp[2] = readw(&reg_resp[2]) |
+						   (readw(&reg_resp[3]) << 16);
+			cmd->resp[1] = readw(&reg_resp[4]) |
+						   (readw(&reg_resp[5]) << 16);
+			cmd->resp[0] = readw(&reg_resp[6]) |
+						   (readw(&reg_resp[7]) << 16);
+		} else {
+			cmd->resp[0] = (readw(&reg_resp[0]) >> 8) |
+						   (readw(&reg_resp[1]) << 8) |
+						   ((readw(&reg_resp[2])) << 24);
+		}
+	}
+
+#if 0
+	/* We'll only get an interrupt when all data has been transfered.
+	   By starting to copy data when it's avaiable we can increase throughput by
+	   up to 30%. */
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		schedule_work(&host->read_work);
+#endif
+
+}
+
+static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
+				 struct mmc_data *data)
+{
 	/* set up the block info */
-	writew(data->blksz, host->base + GLAMO_REG_MMC_DATBLKLEN);
-	writew(data->blocks, host->base + GLAMO_REG_MMC_DATBLKCNT);
-	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
-				   data->blksz, data->blocks);
-	host->pio_sgptr = 0;
-	host->pio_words = 0;
-	host->pio_count = 0;
-	host->pio_active = 0;
+	glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
+	glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
+
+	data->bytes_xfered = 0;
+
 	/* if write, prep the write into the shared RAM before the command */
 	if (data->flags & MMC_DATA_WRITE) {
-		host->pio_active = XFER_WRITE;
-		return do_pio_write(host);
+		do_pio_write(host, data);
 	}
-	host->pio_active = XFER_READ;
+
+	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+				   data->blksz, data->blocks);
 	return 0;
 }
 
-static void glamo_mci_send_request(struct mmc_host *mmc)
+static int glamo_mci_irq_poll(struct glamo_mci_host *host,
+				struct mmc_command *cmd)
 {
-	struct glamo_mci_host *host = mmc_priv(mmc);
-	struct mmc_request *mrq = host->mrq;
-	struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
-	u16 * pu16 = (u16 *)&cmd->resp[0];
-	u16 * reg_resp = (u16 *)(host->base + GLAMO_REG_MMC_CMD_RSP1);
-	u16 status;
-	int n;
 	int timeout = 1000000;
-	int insanity_timeout = 1000000;
-
-	if (host->suspending) {
-		dev_err(&host->pdev->dev, "IGNORING glamo_mci_send_request while "
-								 "suspended\n");
-		cmd->error = -EIO;
-		if (cmd->data)
-			cmd->data->error = -EIO;
-		mmc_request_done(mmc, mrq);
-		return;
+	/*
+	 * if the glamo INT# line isn't wired (*cough* it can happen)
+	 * I'm afraid we have to spin on the IRQ status bit and "be
+	 * our own INT# line"
+	 */
+	/*
+	 * we have faith we will get an "interrupt"...
+	 * but something insane like suspend problems can mean
+	 * we spin here forever, so we timeout after a LONG time
+	 */
+	while ((!(readw(host->core->base +
+		 GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
+		   (timeout--));
+
+	if (timeout < 0) {
+		if (cmd->data->error)
+			cmd->data->error = -ETIMEDOUT;
+		dev_err(&host->pdev->dev, "Payload timeout\n");
+		return -ETIMEDOUT;
 	}
+	/* ack this interrupt source */
+	writew(GLAMO_IRQ_MMC, host->core->base +
+		   GLAMO_REG_IRQ_CLEAR);
 
-	host->ccnt++;
-	/*
-	 * somehow 2.6.24 MCI manages to issue MMC_WRITE_BLOCK *without* the
-	 * MMC_DATA_WRITE flag, WTF?  Work around the madness.
+	/* yay we are an interrupt controller! -- call the ISR
+	 * it will stop clock to card
 	 */
-	if (cmd->opcode == MMC_WRITE_BLOCK)
-		if (mrq->data)
-			mrq->data->flags |= MMC_DATA_WRITE;
-
-	 /* this guy has data to read/write? */
-	if ((!host->cmd_is_stop) && cmd->data) {
-		int res;
-		host->dcnt++;
-		res = glamo_mci_prepare_pio(host, cmd->data);
-		if (res) {
+	glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
+
+	return 0;
+}
+
+static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd = mrq->cmd;
+
+	glamo_mci_clock_enable(host);
+	host->request_counter++;
+	if (cmd->data) {
+		if(glamo_mci_prepare_pio(host, cmd->data)) {
 			cmd->error = -EIO;
 			cmd->data->error = -EIO;
-			mmc_request_done(mmc, mrq);
-			return;
+			goto done;
 		}
 	}
 
@@ -651,67 +602,19 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
 		 cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
 		 cmd->flags);
 
-	/* resume requested clock rate
-	 * scale it down by sd_slow_ratio if platform requests it
-	 */
-	__glamo_mci_fix_card_div(host, host->clk_div);
-
-	if (glamo_mci_send_command(host, cmd))
-		goto bail;
-
-	/* we are deselecting card?  because it isn't going to ack then... */
-	if ((cmd->opcode == 7) && (cmd->arg == 0))
-		goto done;
+	glamo_mci_send_command(host, cmd);
 
 	/*
-	 * we must spin until response is ready or timed out
-	 * -- we don't get interrupts unless there is a bulk rx
+	 * if we don't have bulk data to take care of, we're done
 	 */
-	do
-		status = readw(host->base + GLAMO_REG_MMC_RB_STAT1);
-	while (((((status >> 15) & 1) != (host->ccnt & 1)) ||
-		(!(status & (GLAMO_STAT1_MMC_RB_RRDY |
-			     GLAMO_STAT1_MMC_RTOUT |
-			     GLAMO_STAT1_MMC_DTOUT |
-			     GLAMO_STAT1_MMC_BWERR |
-			     GLAMO_STAT1_MMC_BRERR)))) && (insanity_timeout--));
-
-	if (insanity_timeout < 0)
-		dev_info(&host->pdev->dev, "command timeout, continuing\n");
-
-	if (status & (GLAMO_STAT1_MMC_RTOUT |
-		      GLAMO_STAT1_MMC_DTOUT))
-		cmd->error = -ETIMEDOUT;
-	if (status & (GLAMO_STAT1_MMC_BWERR |
-		      GLAMO_STAT1_MMC_BRERR))
-		cmd->error = -EILSEQ;
+	if (!cmd->data || cmd->error)
+		goto done;
 
-	if (host->cmd_is_stop)
-		goto bail;
 
-	if (cmd->error) {
-		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
-		goto done;
+	if (!host->core->irq_works) {
+		if (glamo_mci_irq_poll(host, mrq->cmd))
+			goto done;
 	}
-	/*
-	 * mangle the response registers in two different exciting
-	 * undocumented ways discovered by trial and error
-	 */
-	if (mmc_resp_type(cmd) == MMC_RSP_R2)
-		/* grab the response */
-		for (n = 0; n < 8; n++) /* super mangle power 1 */
-			pu16[n ^ 6] = readw(&reg_resp[n]);
-	else
-		for (n = 0; n < 3; n++) /* super mangle power 2 */
-			pu16[n] = (readw(&reg_resp[n]) >> 8) |
-				  (readw(&reg_resp[n + 1]) << 8);
-	/*
-	 * if we don't have bulk data to take care of, we're done
-	 */
-	if (!cmd->data)
-		goto done;
-	if (!(cmd->data->flags & (MMC_DATA_READ | MMC_DATA_WRITE)))
-		goto done;
 
 	/*
 	 * Otherwise can can use the interrupt as async completion --
@@ -720,182 +623,83 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
 	 * will service it
 	 */
 	dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
-	/*
-	 * if the glamo INT# line isn't wired (*cough* it can happen)
-	 * I'm afraid we have to spin on the IRQ status bit and "be
-	 * our own INT# line"
-	 */
-	if (!glamo_mci_def_pdata.pglamo->irq_works) {
-		/*
-		 * we have faith we will get an "interrupt"...
-		 * but something insane like suspend problems can mean
-		 * we spin here forever, so we timeout after a LONG time
-		 */
-		while ((!(readw(glamo_mci_def_pdata.pglamo->base +
-			 GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
-		       (timeout--))
-			;
-
-		if (timeout < 0) {
-			if (cmd->data->error)
-				cmd->data->error = -ETIMEDOUT;
-			dev_err(&host->pdev->dev, "Payload timeout\n");
-			goto bail;
-		}
-
-		/* yay we are an interrupt controller! -- call the ISR
-		 * it will stop clock to card
-		 */
-		glamo_mci_irq_host(host);
-	}
 	return;
-
 done:
-	host->complete_what = COMPLETION_NONE;
-	host->mrq = NULL;
-	mmc_request_done(host->mmc, cmd->mrq);
-bail:
-	if (!sd_idleclk && !host->force_slow_during_powerup)
-		/* stop the clock to card */
-		__glamo_mci_fix_card_div(host, -1);
-}
-
-static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-	struct glamo_mci_host *host = mmc_priv(mmc);
-
-	host->cmd_is_stop = 0;
-	host->mrq = mrq;
-	glamo_mci_send_request(mmc);
-}
-
-#if 1
-static void glamo_mci_reset(struct glamo_mci_host *host)
-{
-	if (host->suspending) {
-		dev_err(&host->pdev->dev, "IGNORING glamo_mci_reset while "
-								 "suspended\n");
-		return;
-	}
-	dev_dbg(&host->pdev->dev, "******* glamo_mci_reset\n");
-	/* reset MMC controller */
-	writew(GLAMO_CLOCK_MMC_RESET | GLAMO_CLOCK_MMC_DG_TCLK |
-		   GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK |
-		   GLAMO_CLOCK_MMC_EN_M9CLK,
-		   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
-	udelay(10);
-	/* and disable reset */
-	writew(GLAMO_CLOCK_MMC_DG_TCLK |
-		   GLAMO_CLOCK_MMC_EN_TCLK | GLAMO_CLOCK_MMC_DG_M9CLK |
-		   GLAMO_CLOCK_MMC_EN_M9CLK,
-		   glamo_mci_def_pdata.pglamo->base + GLAMO_REG_CLOCK_MMC);
+	glamo_mci_request_done(host, mrq);
 }
-#endif
-static inline int glamo_mci_get_mv(int vdd)
-{
-	int mv = 1650;
-
-	if (vdd > 7)
-		mv += 350 + 100 * (vdd - 8);
 
-	return mv;
-}
+static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
+				unsigned char power_mode) {
+	int ret;
 
-static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	struct glamo_mci_host *host = mmc_priv(mmc);
-	struct regulator *regulator;
-	int n = 0;
-	int div;
-	int powering = 0;
-	int mv;
-
-	if (host->suspending) {
-		dev_err(&host->pdev->dev, "IGNORING glamo_mci_set_ios while "
-								 "suspended\n");
+	if (power_mode == host->power_mode)
 		return;
-	}
-
-	regulator = host->regulator;
 
-	/* Set power */
-	switch(ios->power_mode) {
+	switch(power_mode) {
 	case MMC_POWER_UP:
-		if (host->pdata->glamo_can_set_mci_power()) {
-			mv = glamo_mci_get_mv(ios->vdd);
-			regulator_set_voltage(regulator, mv * 1000, mv * 1000);
-			regulator_enable(regulator);
+		if (host->power_mode == MMC_POWER_OFF) {
+			ret = regulator_enable(host->regulator);
+			if (ret)
+				dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret);
 		}
 		break;
 	case MMC_POWER_ON:
-		/*
-		 * we should use very slow clock until first bulk
-		 * transfer completes OK
-		 */
-		host->force_slow_during_powerup = 1;
-
-		if (host->vdd_current != ios->vdd) {
-			if (host->pdata->glamo_can_set_mci_power()) {
-				mv = glamo_mci_get_mv(ios->vdd);
-				regulator_set_voltage(regulator, mv * 1000, mv * 1000);
-				printk(KERN_INFO "SD power -> %dmV\n", mv);
-			}
-			host->vdd_current = ios->vdd;
-		}
-		if (host->power_mode_current == MMC_POWER_OFF) {
-			glamo_engine_enable(glamo_mci_def_pdata.pglamo,
-							      GLAMO_ENGINE_MMC);
-			powering = 1;
-		}
 		break;
-
 	case MMC_POWER_OFF:
 	default:
-		if (host->power_mode_current == MMC_POWER_OFF)
-			break;
-		/* never want clocking with dead card */
-		__glamo_mci_fix_card_div(host, -1);
-
-		glamo_engine_disable(glamo_mci_def_pdata.pglamo,
+		glamo_engine_disable(host->core,
 				     GLAMO_ENGINE_MMC);
-		regulator_disable(regulator);
-		host->vdd_current = -1;
+
+		ret = regulator_disable(host->regulator);
+		if (ret)
+			dev_warn(&host->pdev->dev, "Failed to disable regulator: %d\n", ret);
 		break;
 	}
-	host->power_mode_current = ios->power_mode;
+	host->power_mode = power_mode;
+}
 
-	host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
-	host->clk_div = div;
+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct glamo_mci_host *host = mmc_priv(mmc);
+	int bus_width = 0;
+	int rate;
+	int sd_drive;
+	int ret;
 
-	/* after power-up, we are meant to give it >= 74 clocks so it can
-	 * initialize itself.  Doubt any modern cards need it but anyway...
-	 */
-	if (powering)
-		mdelay(1);
+	/* Set power */
+	glamo_mci_set_power_mode(host, ios->power_mode);
 
-	if (!sd_idleclk && !host->force_slow_during_powerup)
-		/* stop the clock to card, because we are idle until transfer */
-		__glamo_mci_fix_card_div(host, -1);
+	if (host->vdd != ios->vdd) {
+		ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
+		if (ret)
+			dev_err(&host->pdev->dev, "Failed to set regulator voltage: %d\n", ret);
+		else
+			host->vdd = ios->vdd;
+	}
+	rate = glamo_mci_set_card_clock(host, ios->clock);
 
 	if ((ios->power_mode == MMC_POWER_ON) ||
 	    (ios->power_mode == MMC_POWER_UP)) {
 		dev_info(&host->pdev->dev,
-			"powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). "
-			"Bus width=%d\n",(int)ios->vdd,
-			host->real_rate / 1000, (int)host->clk_div,
+			"powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
+			"Bus width=%d\n", ios->vdd,
+			rate / 1000, 0,
 			ios->clock / 1000, (int)ios->bus_width);
-	} else
+	} else {
 		dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+	}
 
 	/* set bus width */
-	host->bus_width = ios->bus_width;
-	if (host->bus_width == MMC_BUS_WIDTH_4)
-		n = GLAMO_BASIC_MMC_EN_4BIT_DATA;
-	writew((readw(host->base + GLAMO_REG_MMC_BASIC) &
-					  (~(GLAMO_BASIC_MMC_EN_4BIT_DATA |
-					     GLAMO_BASIC_MMC_EN_DR_STR0 |
-					     GLAMO_BASIC_MMC_EN_DR_STR1))) | n |
-			       sd_drive << 6, host->base + GLAMO_REG_MMC_BASIC);
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;
+
+	sd_drive = (rate * 4) / host->clk_rate;
+	if (sd_drive > 3)
+		sd_drive = 3;
+
+	glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
+					       GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0,
+						   bus_width | sd_drive << 6);
 }
 
 
@@ -908,15 +712,16 @@ static int glamo_mci_get_ro(struct mmc_host *mmc)
 }
 
 static struct mmc_host_ops glamo_mci_ops = {
-	.request	= glamo_mci_request,
+	.request	= glamo_mci_send_request,
 	.set_ios	= glamo_mci_set_ios,
 	.get_ro		= glamo_mci_get_ro,
 };
 
 static int glamo_mci_probe(struct platform_device *pdev)
 {
-	struct mmc_host 	*mmc;
-	struct glamo_mci_host 	*host;
+	struct mmc_host *mmc;
+	struct glamo_mci_host *host;
+	struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
 	int ret;
 
 	dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
@@ -930,226 +735,241 @@ static int glamo_mci_probe(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 	host->pdev = pdev;
-	host->pdata = &glamo_mci_def_pdata;
-	host->power_mode_current = MMC_POWER_OFF;
+	if (core->pdata)
+		host->pdata = core->pdata->mmc_data;
+	host->power_mode = MMC_POWER_OFF;
+	host->clk_enabled = 0;
+	host->core = core;
 
-	host->complete_what = COMPLETION_NONE;
-	host->pio_active = XFER_NONE;
-
-	spin_lock_init(&host->complete_lock);
 	INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
+	INIT_WORK(&host->read_work, glamo_mci_read_worker);
+
+	host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
+	if (!host->regulator) {
+		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
+		ret = -ENODEV;
+		goto probe_free_host;
+	}
 
-	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!host->mem) {
+	host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!host->mmio_mem) {
 		dev_err(&pdev->dev,
 			"failed to get io memory region resouce.\n");
-
 		ret = -ENOENT;
-		goto probe_free_host;
+		goto probe_regulator_put;
 	}
 
-	host->mem = request_mem_region(host->mem->start,
-		RESSIZE(host->mem), pdev->name);
+	host->mmio_mem = request_mem_region(host->mmio_mem->start,
+	                                    resource_size(host->mmio_mem),
+	                                    pdev->name);
 
-	if (!host->mem) {
+	if (!host->mmio_mem) {
 		dev_err(&pdev->dev, "failed to request io memory region.\n");
 		ret = -ENOENT;
-		goto probe_free_host;
+		goto probe_regulator_put;
 	}
 
-	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
-	if (!host->base) {
+	host->mmio_base = ioremap(host->mmio_mem->start,
+	                          resource_size(host->mmio_mem));
+	if (!host->mmio_base) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
-		goto probe_free_mem_region;
+		goto probe_free_mem_region_mmio;
 	}
 
-	host->regulator = regulator_get(&pdev->dev, "SD_3V3");
-	if (!host->regulator) {
-		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
-		return -ENODEV;
-	}
-
-	/* set the handler for our bit of the shared chip irq register */
-	set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq);
-	/* stash host as our handler's private data */
-	set_irq_data(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
 
 	/* Get ahold of our data buffer we use for data in and out on MMC */
-	host->mem_data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!host->mem_data) {
+	host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!host->data_mem) {
 		dev_err(&pdev->dev,
 			"failed to get io memory region resource.\n");
 		ret = -ENOENT;
-		goto probe_iounmap;
+		goto probe_iounmap_mmio;
 	}
 
-	host->mem_data = request_mem_region(host->mem_data->start,
-		RESSIZE(host->mem_data), pdev->name);
+	host->data_mem = request_mem_region(host->data_mem->start,
+	                                    resource_size(host->data_mem),
+										pdev->name);
 
-	if (!host->mem_data) {
+	if (!host->data_mem) {
 		dev_err(&pdev->dev, "failed to request io memory region.\n");
 		ret = -ENOENT;
-		goto probe_iounmap;
+		goto probe_iounmap_mmio;
 	}
-	host->base_data = ioremap(host->mem_data->start,
-					  RESSIZE(host->mem_data));
-	host->data_max_size = RESSIZE(host->mem_data);
+	host->data_base = ioremap(host->data_mem->start,
+	                          resource_size(host->data_mem));
 
-	if (host->base_data == 0) {
+	if (host->data_base == 0) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
 		goto probe_free_mem_region_data;
 	}
 
-	host->vdd_current = 0;
-	host->clk_rate = 50000000; /* really it's 49152000 */
-	host->clk_div = 16;
+	ret = request_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq, IRQF_SHARED,
+	               pdev->name, host);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register irq.\n");
+		goto probe_iounmap_data;
+	}
+
+
+	host->vdd = 0;
+	host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1);
 
 	/* explain our host controller capabilities */
-	mmc->ops 	= &glamo_mci_ops;
-	mmc->ocr_avail	= host->pdata->ocr_avail;
-	mmc->caps	= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_MMC_HIGHSPEED |
-			  MMC_CAP_SD_HIGHSPEED;
-	mmc->f_min 	= host->clk_rate / 256;
-	mmc->f_max 	= sd_max_clk;
-
-	mmc->max_blk_count	= (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
-	mmc->max_blk_size	= (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
-	mmc->max_req_size	= RESSIZE(host->mem_data) / 2;
-	mmc->max_seg_size	= mmc->max_req_size;
-	mmc->max_phys_segs	= 1; /* hw doesn't talk about segs??? */
-	mmc->max_hw_segs	= 1;
-
-	dev_info(&host->pdev->dev, "probe: mapped mci_base:%p irq:%u.\n",
-		host->base, host->irq);
+	mmc->ops       = &glamo_mci_ops;
+	mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator);
+	mmc->caps      = MMC_CAP_4_BIT_DATA |
+	                 MMC_CAP_MMC_HIGHSPEED |
+	                 MMC_CAP_SD_HIGHSPEED;
+	mmc->f_min     = host->clk_rate / 256;
+	mmc->f_max     = sd_max_clk;
+
+	mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+	mmc->max_blk_size  = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+	mmc->max_req_size  = resource_size(host->data_mem);
+	mmc->max_seg_size  = mmc->max_req_size;
+	mmc->max_phys_segs = 128;
+	mmc->max_hw_segs   = 128;
+
+	if (mmc->ocr_avail < 0) {
+		dev_warn(&pdev->dev, "Failed to get ocr list for regulator: %d.\n",
+				mmc->ocr_avail);
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
 
 	platform_set_drvdata(pdev, mmc);
 
-	glamo_engine_enable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
-	glamo_mci_reset(host);
+	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+	glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
+
+	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+			(u16)(host->data_mem->start));
+	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+			(u16)(host->data_mem->start >> 16));
+
+	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+			(u16)(host->data_mem->start));
+	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+			(u16)(host->data_mem->start >> 16));
+
+	setup_timer(&host->disable_timer, glamo_mci_disable_timer,
+				(unsigned long)host);
 
 	if ((ret = mmc_add_host(mmc))) {
 		dev_err(&pdev->dev, "failed to add mmc host.\n");
-		goto probe_free_mem_region_data;
+		goto probe_freeirq;
 	}
 
 	dev_info(&pdev->dev,"initialisation done.\n");
 	return 0;
 
- probe_free_mem_region_data:
-	release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
-
- probe_iounmap:
-	iounmap(host->base);
-
- probe_free_mem_region:
-	release_mem_region(host->mem->start, RESSIZE(host->mem));
-
- probe_free_host:
+probe_freeirq:
+	free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
+probe_iounmap_data:
+	iounmap(host->data_base);
+probe_free_mem_region_data:
+	release_mem_region(host->data_mem->start, resource_size(host->data_mem));
+probe_iounmap_mmio:
+	iounmap(host->mmio_base);
+probe_free_mem_region_mmio:
+	release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem));
+probe_regulator_put:
+	regulator_put(host->regulator);
+probe_free_host:
 	mmc_free_host(mmc);
- probe_out:
+probe_out:
 	return ret;
 }
 
 static int glamo_mci_remove(struct platform_device *pdev)
 {
-	struct mmc_host 	*mmc  = platform_get_drvdata(pdev);
-	struct glamo_mci_host 	*host = mmc_priv(mmc);
-	struct regulator *regulator;
+	struct mmc_host	*mmc = platform_get_drvdata(pdev);
+	struct glamo_mci_host *host = mmc_priv(mmc);
+
+	free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
 
 	mmc_remove_host(mmc);
-	/* stop using our handler, revert it to default */
-	set_irq_handler(IRQ_GLAMO(GLAMO_IRQIDX_MMC), handle_level_irq);
-	iounmap(host->base);
-	iounmap(host->base_data);
-	release_mem_region(host->mem->start, RESSIZE(host->mem));
-	release_mem_region(host->mem_data->start, RESSIZE(host->mem_data));
-
-	regulator = host->regulator;
-	regulator_put(regulator);
-	
+	iounmap(host->mmio_base);
+	iounmap(host->data_base);
+	release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem));
+	release_mem_region(host->data_mem->start, resource_size(host->data_mem));
+
+	regulator_put(host->regulator);
+
 	mmc_free_host(mmc);
 
-	glamo_engine_disable(glamo_mci_def_pdata.pglamo, GLAMO_ENGINE_MMC);
+	glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
 	return 0;
 }
 
 
 #ifdef CONFIG_PM
 
-static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state)
+static int glamo_mci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
-	struct glamo_mci_host 	*host = mmc_priv(mmc);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct glamo_mci_host *host = mmc_priv(mmc);
 	int ret;
 
 	cancel_work_sync(&host->irq_work);
 
-	/*
-	 * possible workaround for SD corruption during suspend - resume
-	 * make sure the clock was running during suspend and consequently
-	 * resume
-	 */
-	__glamo_mci_fix_card_div(host, host->clk_div);
-
-	/* we are going to do more commands to override this in
-	 * mmc_suspend_host(), so we need to change sd_idleclk for the
-	 * duration as well
-	 */
-	suspend_sd_idleclk = sd_idleclk;
-	sd_idleclk = 1;
-
-	ret = mmc_suspend_host(mmc, state);
-
-	host->suspending++;
-	/* so that when we resume, we use any modified max rate */
-	mmc->f_max = sd_max_clk;
+	ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
+	glamo_mci_clock_enable(host);
 
 	return ret;
 }
 
-int glamo_mci_resume(struct platform_device *dev)
+static int glamo_mci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
-	struct glamo_mci_host 	*host = mmc_priv(mmc);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct glamo_mci_host *host = mmc_priv(mmc);
 	int ret;
 
-	sd_idleclk = 1;
-
-	glamo_engine_enable(host->pdata->pglamo, GLAMO_ENGINE_MMC);
-	glamo_mci_reset(host);
+	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+	glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
 
-	host->suspending--;
+	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+			(u16)(host->data_mem->start));
+	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+			(u16)(host->data_mem->start >> 16));
 
-	ret = mmc_resume_host(mmc);
+	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+			(u16)(host->data_mem->start));
+	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+			(u16)(host->data_mem->start >> 16));
+	mdelay(5);
 
-	/* put sd_idleclk back to pre-suspend state */
-	sd_idleclk = suspend_sd_idleclk;
+	ret = mmc_resume_host(host->mmc);
+/*	glamo_mci_clock_disable(host);*/
 
-	return ret;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(glamo_mci_resume);
+
+static struct dev_pm_ops glamo_mci_pm_ops = {
+	.suspend = glamo_mci_suspend,
+	.resume  = glamo_mci_resume,
+};
+#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops)
 
 #else /* CONFIG_PM */
-#define glamo_mci_suspend NULL
-#define glamo_mci_resume NULL
+#define GLAMO_MCI_PM_OPS NULL
 #endif /* CONFIG_PM */
 
 
 static struct platform_driver glamo_mci_driver =
 {
-	.driver.name	= "glamo-mci",
-	.probe		= glamo_mci_probe,
-	.remove		= glamo_mci_remove,
-	.suspend	= glamo_mci_suspend,
-	.resume		= glamo_mci_resume,
+	.probe  = glamo_mci_probe,
+	.remove = glamo_mci_remove,
+	.driver = {
+		.name  = "glamo-mci",
+		.owner = THIS_MODULE,
+		.pm    = GLAMO_MCI_PM_OPS,
+	},
 };
 
 static int __init glamo_mci_init(void)
 {
-	spin_lock_init(&clock_lock);
 	platform_driver_register(&glamo_mci_driver);
 	return 0;
 }