workaround for timer glitch on some boards
[openwrt.git] / target / linux /
2007-08-25 mbmworkaround for timer glitch on some boards
2007-08-25 mbmfix wan configuration on wr850g v2/v3
2007-08-24 juhosg[adm5120] override CPU features
2007-08-23 florianBuild the quota module for 2.4 targets
2007-08-23 florianAdd the icplus phy patch, will be required for the...
2007-08-22 juhosg[adm5120] disable VLANs for RB1xx boards (#2132)
2007-08-22 florianAdd kmod-ppp-synctty (#2231)
2007-08-21 nbdadd sysupgrade script for config preserving system...
2007-08-21 florianAdd the ipset missing file from #1970
2007-08-21 florianMove to 2.6.22.4
2007-08-21 florianAdd usb-keyspan modules (#2229)
2007-08-21 florianCompile crc itu-t as a module
2007-08-19 nbdadd refresh ioctl to mtd (for rescanning partitions...
2007-08-19 nbddisable CONFIG_EMBEDDED for x86-2.6, enable KALLSYMS
2007-08-19 juhosg[adm5120] fix ethernet port mapping of the RB133
2007-08-19 nbddisable romfs, nothing uses it
2007-08-19 nbdfix an off-by-one error
2007-08-18 nicocosmetic fix: properly indent source
2007-08-18 nicoenable use of 8M flash (closes: #2232)
2007-08-18 nicofix vlynq initialization (closes: #2135)
2007-08-18 nicoupdate ar7 config, disable watchdog for now (closes...
2007-08-18 nicoremove useless code from board support (closes: #2164...
2007-08-13 juhosg[adm5120] cleanup patch of the USB driver
2007-08-12 florianFix typo (#2210)
2007-08-11 florianAddd kernel modules for NTFS (#2181)
2007-08-10 nbdfix ar7 image installation (patch by sw, fixes #2197)
2007-08-10 juhosg[adm5120] USB driver fixes
2007-08-10 florianRevert the command line appending, was causing some...
2007-08-10 rwhitbyixp4xx-2.6/nslu2: Added support for building 16MB images
2007-08-10 juhosg[adm5120] minor usb driver cleanup
2007-08-08 florianFix the bcm96358 PRID
2007-08-08 florianUse the dmz led as diagnostic led
2007-08-08 florianMore rdc fixes, thanks to Daniel Gimpelevich
2007-08-07 juhosg[adm5120] LED driver fixes
2007-08-07 juhosgadd support for special LED brightness values
2007-08-07 florianThese patches moved to generic-2.6
2007-08-07 florianRemove the eeprom patches, but move the git-newsetup...
2007-08-07 florianAlso add eeprom 93cx6 to generic-2.6
2007-08-07 florianUpdate rdc-2.6 description and fix the firmware for...
2007-08-07 florianFix the gpio handling and flash resource declaration...
2007-08-07 florianEnable kexec for x86 as well (#2141)
2007-08-07 florianRevert 8353, can cause more bad than good
2007-08-07 nbdbuild system cleanup/restructuring as described in...
2007-08-06 florianPrevent the ioctl from handling even unsupported ioctls
2007-08-06 florianAllow rdc-2.6 to kexec
2007-08-06 florianMore led driver fixes
2007-08-06 florianRemove the LED code from the network driver
2007-08-06 florianStill broken for now
2007-08-06 florianMore rdc-2.6 fixes by Daniel Gimpelevich, thanks !
2007-08-06 florianPut back some code from the 2.4 driver, supposed to...
2007-08-06 florianDisable NAPI by default (#1671)
2007-08-06 juhosg[adm5120] add special values for GPIO lines in switch
2007-08-06 florianAdd generic gpio support to rdc, convert the led driver...
2007-08-05 blogicadded improved watchdog driver for amazon
2007-08-05 blogiccleaned up amazon serial and prom code
2007-08-04 blogicremoved volatile register derefs from amazon setup...
2007-08-04 blogicrewrite of the amazon irq code
2007-08-03 juhosg[adm5120] fix reset function in USB driver
2007-08-03 juhosg[adm5120] USB driver fixes
2007-08-03 florianMake jffs2 images work with rdc, add a sitecom wl-153...
2007-08-02 florianSome adm5120-hcd cleanups
2007-08-02 florianAdd a zyxel prestige profile for the adm5120eb target...
2007-08-02 juhosg[adm5120] add definitions for RouterBOARD 150, no NAND...
2007-08-01 juhosg[adm5120] add support for board specific vlan matrix...
2007-08-01 florianAdd CONFIG_HID to not set by default
2007-08-01 florianFix the AR7 led driver compilation (#2160)
2007-07-31 florianRegister the second uart on tnetd7300 and fix the watch...
2007-07-31 florianFix the gpio init (#2148)
2007-07-31 florianRemove the dependency to devio, since it is not in...
2007-07-31 florianFix the remaining kernel config options (#2102)
2007-07-30 nbdnext round of cleanup, convert target/ - make -j works...
2007-07-30 florianBetter x86 generic config, the lzma decompressor is...
2007-07-29 blogicimproved au1000 usb patch
2007-07-29 blogicimproved patch for au1000 usb-power switch
2007-07-29 blogicremoved fox-vhdl patch, it will return with .22
2007-07-29 blogicsmall fix to etrax serial port setup
2007-07-29 hcgModified patches for 2.6.22.1 kernel
2007-07-29 hcgPrepare for 2.6.22.1 kernel
2007-07-29 blogicsome fixes to the etrax build
2007-07-28 juhosg[adm5120] use adm5120 flash map driver on BE targets
2007-07-27 florianAdd the 93cx6 patch to generic-2.6, correctly fix depen...
2007-07-27 juhosg[adm5120] add LED definitions for the RB133/133C boards...
2007-07-27 juhosg[adm5120] rename patches to follow our naming conventions
2007-07-27 rwhitbyRemoved the obsolete MTD_SPLIT_ROOTFS config symbol.
2007-07-27 rwhitbyAdd missing config symbols that stop a default 2.6...
2007-07-27 nicomore cosmetic fixes for ar7
2007-07-27 nicoupdate ar7 to 2.6.22.1 (thanks to Matteo Croce for...
2007-07-27 nicocosmetic fix (indent and use c-style comments)
2007-07-27 nicoupdate rdc-2.6 config (thanks to Daniel Gimpelevich)
2007-07-26 nbdprotect the adm5120 pci ops with a spinlock - fixes...
2007-07-26 florianUse the new x86 code, thanks sn9 !
2007-07-26 nbdbrcm47xx-2.6: add a few nops here, some irq saving...
2007-07-25 nbdfix the size of the flash mem window on pronghorn metro...
2007-07-25 florianNAPI for r6040 of course depends on r6040
2007-07-25 florianRemove preinit.arch, not used, compile NAPI support...
2007-07-25 juhosg[adm5120] uses AMBA PL010 driver for the serial ports...
2007-07-25 florianUpgrade rdc to 2.6.22.1, include r6040 ethernet fixes...
2007-07-24 blogicon the au1000 usb could never work as the power switch...
2007-07-24 blogicfixed au1000 eth0 ioctl patch
2007-07-24 blogicoops, wrong file for au1000 pci fix
next
This page took 0.061608 seconds and 7 git commands to generate.