jow [Wed, 22 Feb 2012 13:56:06 +0000 (13:56 +0000)]
[package] iwinfo: fix array size mismatch after r30684
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30685
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 22 Feb 2012 13:41:50 +0000 (13:41 +0000)]
[PATCH] Allow full 250mw (24dBm) on WRT54GL and related with wl legacy driver on iwinfo
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30684
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 22 Feb 2012 13:40:29 +0000 (13:40 +0000)]
[PATCH] Adjust txpower offset for Nano and Picostation M2 in iwinfo
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30683
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 22 Feb 2012 13:39:16 +0000 (13:39 +0000)]
[package] iwinfo: add per-station rate and mcs info to assoclist op
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30682
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Feb 2012 13:06:44 +0000 (13:06 +0000)]
ramips: raeth: show interrupt statistics in debugfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30681
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Feb 2012 13:06:42 +0000 (13:06 +0000)]
ramips: raeth: add debugfs support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30680
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Feb 2012 13:06:41 +0000 (13:06 +0000)]
ramips: raeth: rename main source file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30679
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 22 Feb 2012 12:30:24 +0000 (12:30 +0000)]
[package] iwinfo: fix logic flaw in mtd partition check
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30678
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 22 Feb 2012 01:47:48 +0000 (01:47 +0000)]
iptables: make it possible to dynamically configure built-in statically linked extensions, fold -mod-conntrack and -mod-nat into the default package. saves about 8k on an ar71xx default squashfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30676
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 21 Feb 2012 23:03:21 +0000 (23:03 +0000)]
iptables: do not link binaries with -rdynamic, plugins do not need any symbols from the main executable. saves some space
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30675
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Tue, 21 Feb 2012 20:36:58 +0000 (20:36 +0000)]
mac80211: b43: use firmware version 666.2 as default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30673
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 21 Feb 2012 18:19:26 +0000 (18:19 +0000)]
[package] iwinfo: fix logic flaw in WPA OUI filtering, solves misdetecting various WPA2-PSK only networks as mixed mode
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30672
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 21 Feb 2012 09:44:30 +0000 (09:44 +0000)]
ramips: raeth: add missing Kconfig and Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30671
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 21 Feb 2012 09:26:43 +0000 (09:26 +0000)]
ramips: move the ethernet driver into a separate directory
Also clean up the Kconfig symbols.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30670
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 21 Feb 2012 09:26:41 +0000 (09:26 +0000)]
ramips: rename the spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30669
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 21 Feb 2012 00:52:43 +0000 (00:52 +0000)]
dropbear: disable assertions to reduce code size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30668
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 21 Feb 2012 00:27:28 +0000 (00:27 +0000)]
hostapd: disable the state dump callback to save a few more kb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30667
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 20 Feb 2012 23:41:52 +0000 (23:41 +0000)]
hostapd: add configurable debug message minimum priority to cut down on bloat generated by excessive debug messages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30666
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 20 Feb 2012 22:46:27 +0000 (22:46 +0000)]
mac80211: fix memory leak on bcm5354
The ucode triggers the gpio pins used for the buttons and causes diag to handle them and send them to userspace.
This only happened with a more recent firmware.
This patch was tested on an Asus wl-520GU and should also work on the other bcm5354 based asus devices. I do not know if it works on the dir320.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30665
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 20 Feb 2012 21:27:41 +0000 (21:27 +0000)]
[package] iwinfo: iwinfo_hardware_id_from_mtd() never writes, so do not request write access in mmap()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30664
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 20 Feb 2012 21:17:59 +0000 (21:17 +0000)]
[package] iwinfo: recognize AR5416 EEPROMs as seen on the Ubiquiti Picostation M2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30663
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 20 Feb 2012 17:38:26 +0000 (17:38 +0000)]
strip kernel modules more aggressively: make all global symbols local, rename all symbols in the symbol table to make them compress better
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30662
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 20 Feb 2012 10:51:48 +0000 (10:51 +0000)]
ar71xx: switch to kmod-gpio-button-hotplug
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30660
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 20 Feb 2012 10:51:43 +0000 (10:51 +0000)]
add gpio-button-hotplug, like button-hotplug + gpio-keys-polled, fully compatible, but without the nasty input-core dependency chain
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30659
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 20 Feb 2012 09:27:32 +0000 (09:27 +0000)]
[package] iwinfo: add more device entries
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30658
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 20 Feb 2012 09:03:17 +0000 (09:03 +0000)]
kernel: strip unnecessary symbol table information from kernel modules, reduces default squashfs size on ar71xx by about 4k
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30657
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 19:40:37 +0000 (19:40 +0000)]
ramips: rt3883: make rt3883_nand_data visible
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30655
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 17:52:23 +0000 (17:52 +0000)]
ramips: merge 3.2 fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30652
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 17:52:20 +0000 (17:52 +0000)]
ramips: nuke 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30651
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 17:52:15 +0000 (17:52 +0000)]
ramips: rt305x: nuke built-in MTD partition maps
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30650
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 17:52:11 +0000 (17:52 +0000)]
ramips: rt288x: nuke built-in MTD partition maps
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30649
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 17:52:08 +0000 (17:52 +0000)]
ramips: build sysupgrade image for the V11ST-FE board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30648
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 19 Feb 2012 16:44:49 +0000 (16:44 +0000)]
ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]
Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 19 Feb 2012 14:21:21 +0000 (14:21 +0000)]
mac80211: brcmsmac: fix a build warning, till we update bcma
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30644
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 19 Feb 2012 14:05:17 +0000 (14:05 +0000)]
mac80211: add brcmsmac driver
brcmsmac does not work on bcm47xx based devices or has AP mode support for now.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30643
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 19 Feb 2012 13:26:35 +0000 (13:26 +0000)]
mac80211: fix directory of mwl8k firmware
Thank you Eugene San for the patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30642
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 18 Feb 2012 23:21:47 +0000 (23:21 +0000)]
brcm47xx: add code to generate images for some netgear devices
This is commented out until we get report of working devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30639
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 18 Feb 2012 23:08:26 +0000 (23:08 +0000)]
brcm47xx: sprom for nvram parsing
This adds support for parsing sprom form nvram for sprom version form 1 to 9.
It also adds sprom from nvram support for devices on the bcma bus.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30638
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 17:36:21 +0000 (17:36 +0000)]
ralink: rt3883: disable the 2GHz band on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30632
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 17:36:16 +0000 (17:36 +0000)]
ramips: rt3883: make rt3883_wlan_data visible
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30631
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 17:36:13 +0000 (17:36 +0000)]
generic: add disable_[25]ghz to struct rt2x00_platform_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30630
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 17:36:09 +0000 (17:36 +0000)]
mac80211: rt2x00: allow to disable bands via platform data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30629
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 16:02:18 +0000 (16:02 +0000)]
package/kernel: add package for MTD testing modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30628
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 14:45:54 +0000 (14:45 +0000)]
firmware-utils/mkfwimage: allow to override firmware magic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30627
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 18 Feb 2012 14:45:52 +0000 (14:45 +0000)]
ar71xx: fix image signature for UBNT-XM boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 22:15:33 +0000 (22:15 +0000)]
ath5k: do not re-run AGC calibration periodically - fixes stability issues on AR2315 (#10574)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30624
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 22:15:26 +0000 (22:15 +0000)]
ath5k: do not stop the hardware queues during PAPD calibration, speeds up calibration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30623
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 17 Feb 2012 17:21:03 +0000 (17:21 +0000)]
generic/2.6.37: fix 'set but unused' build errors on MIPS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30615
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 16:55:08 +0000 (16:55 +0000)]
gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30614
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 16:55:01 +0000 (16:55 +0000)]
gcc: enable --with-headers for the final toolchain build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30613
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 15:54:57 +0000 (15:54 +0000)]
crda: remove unnecessary build dependency on mac80211
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30612
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 15:54:53 +0000 (15:54 +0000)]
hostapd: remove unnecessary dependency on mac80211
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30611
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 17 Feb 2012 09:04:23 +0000 (09:04 +0000)]
[package] broadcom-diag: add missing brackets breakign the detection logic (#10836)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30610
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 17 Feb 2012 00:36:25 +0000 (00:36 +0000)]
[package] iwinfo: implement proper hardware detection for ar23xx SoC devices like the NanoStation 2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30605
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 20:06:22 +0000 (20:06 +0000)]
ramips: extract eeprom for the built-in wlan module on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 20:06:21 +0000 (20:06 +0000)]
ramips: rt3883: change eeprom file name
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Thu, 16 Feb 2012 19:24:34 +0000 (19:24 +0000)]
[scripts] env: colorize git output
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30602
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 16 Feb 2012 17:58:33 +0000 (17:58 +0000)]
[package] iwinfo: fix detection of Bullet M5, the PCI ID was wrong
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30591
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:54:07 +0000 (17:54 +0000)]
[x86] Disable by default padding of images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30590
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:54:04 +0000 (17:54 +0000)]
[x86] Allow gzipping of squashfs images with padded jffs2 partition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30589
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:54:01 +0000 (17:54 +0000)]
[x86] GZip only ext4 and padded images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30588
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:53:57 +0000 (17:53 +0000)]
[x86] Make gzipping of images configurable via menuconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 17:14:34 +0000 (17:14 +0000)]
package/mac80211: fix a possible NULL pointer dereference in rt2x00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30586
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 09:03:27 +0000 (09:03 +0000)]
ar71xx: remove duplicated define from the D-Link profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:54 +0000 (08:17 +0000)]
ramips: select HW_HAS_PCI on per-board basis
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:53 +0000 (08:17 +0000)]
ramips: rt3883: remove a stray character from rt3883.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:52 +0000 (08:17 +0000)]
ramips: rt288x: don't register the PCI controller on each board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:50 +0000 (08:17 +0000)]
ramips: raeth: separate ring allocation and setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 07:51:44 +0000 (07:51 +0000)]
generic: add SND_PPC symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:45:28 +0000 (07:45 +0000)]
[ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:38:33 +0000 (07:38 +0000)]
[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:29:26 +0000 (07:29 +0000)]
[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:24:45 +0000 (07:24 +0000)]
[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Feb 2012 23:37:47 +0000 (23:37 +0000)]
linux 3.2: missing generic symbols
These symbols are dependent on CONFIG_PCI being enabled.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Feb 2012 23:34:24 +0000 (23:34 +0000)]
[package] kernel: fix KCONFIG depends of kmod-md modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30564
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 21:19:02 +0000 (21:19 +0000)]
ramips: rt288x: fix PCI resource conflict
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 15 Feb 2012 21:13:21 +0000 (21:13 +0000)]
[ramips] correct PCI IO/Mem resource swapping
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 15 Feb 2012 21:13:11 +0000 (21:13 +0000)]
[ramips] add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 15 Feb 2012 19:19:12 +0000 (19:19 +0000)]
build: add -Wno-error=unused-but-set-variable to cflags for gcc 4.6 and newer to avoid stupid -Werror related package breakage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30556
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:42 +0000 (18:33 +0000)]
ramips: raeth: add a helper function for skb allocation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:41 +0000 (18:33 +0000)]
ramips: raeth: use netdev_alloc_skb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:40 +0000 (18:33 +0000)]
ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
This helps GCC to generare more efficient code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:38 +0000 (18:33 +0000)]
ramips: raeth: use 're' instead of 'priv' everywhere
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 15 Feb 2012 18:02:57 +0000 (18:02 +0000)]
ath9k: prevent writes to const data on AR9160
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30551
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 13:47:52 +0000 (13:47 +0000)]
ramips: raeth: force link down in ramips_phy_stop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 13:47:50 +0000 (13:47 +0000)]
ramips: raeth: serialize ramips_link_adjust calls
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 06:47:12 +0000 (06:47 +0000)]
ramips: raeth: add PHYLIB support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Tue, 14 Feb 2012 20:13:28 +0000 (20:13 +0000)]
[package] gdb: use an updated 6.8a tarball
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30543
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 20:11:28 +0000 (20:11 +0000)]
[kernel] add missing autoload shortcut to crypto modules for btrfs
Currently the btrfs module (and other fs modules) is loaded before other modules to provide early extroot compatibility. This will fail for btrfs however, because the dependencies crypto-core and crypto-hash are missing. This patch makes them available for early loading too.
Signed-off-by: Jan Willies <jan@willies.info>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30542
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 20:11:24 +0000 (20:11 +0000)]
linux-atm: update solos-pci driver to upstream
Fixes for the solos-pci driver.
- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 20:11:22 +0000 (20:11 +0000)]
linux-atm: headroom/padding fixes
Submitted upstream to netdev by Chas Williams on linux-atm.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:15 +0000 (19:07 +0000)]
mac80211: Allow preamble configuration
Add a new wireless config parameter short_preamble=0|1 to enable
usage of short preambles. Default is to only allow long preambles
as before.
Even if short_preamble is set to 1 hostapd will take care that
short preambles are disabled as soon as a STA associates that
cannot handle short preambles.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30539
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:13 +0000 (19:07 +0000)]
Add kernel module package for SLIP
This patch adds support for a kernel module package for SLIP. We needed it forusing tunslip6 from Contiki OS for 6LoWPAN communications.
Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30538
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:11 +0000 (19:07 +0000)]
[lantiq] generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.
uboot environment config is used by fw_printenv fw_setenv tools.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:09 +0000 (19:07 +0000)]
Update bridge-utils to the last upstream version 1.5.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30536
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:07 +0000 (19:07 +0000)]
[OpenWrt-Devel] update e2fsprogs
Update e2fsprogs to the last upstream version 1.42.
blkid works fine without 100_add_missing_libpthread_for_blkid.patch.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30535
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:05 +0000 (19:07 +0000)]
[lantiq] fix compile error in previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 17:48:04 +0000 (17:48 +0000)]
[lantiq] Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 17:48:01 +0000 (17:48 +0000)]
[pjsip] drop obselete Config.in file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30531
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 14 Feb 2012 17:32:45 +0000 (17:32 +0000)]
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529
3c298f89-4303-0410-b956-
a3cf2f4a3e73
This page took 0.067812 seconds and 4 git commands to generate.
projects / openwrt.git / log