From e14f929ec7584802939782a42bb110d6b02c7f43 Mon Sep 17 00:00:00 2001 From: juhosg Date: Thu, 15 Jul 2010 07:36:52 +0000 Subject: [PATCH] ar71xx: in-flash macs and eeprom for mach-eap7660d This adds in-flash mac-addresses and calibration data for the Senao EAP7660D board. Signed-off-by: Daniel Golle git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22187 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../ar71xx/files/arch/mips/ar71xx/Kconfig | 1 - .../files/arch/mips/ar71xx/mach-eap7660d.c | 81 ++++++++++++++++++- .../files/include/linux/ath5k_platform.h | 30 +++++++ 3 files changed, 109 insertions(+), 3 deletions(-) create mode 100644 target/linux/ar71xx/files/include/linux/ath5k_platform.h diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 95c65bc88..6162f800c 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -226,7 +226,6 @@ config AR71XX_MACH_UBNT config AR71XX_MACH_EAP7660D bool "Senao EAP7660D support" select AR71XX_DEV_M25P80 - select AR71XX_DEV_PB42_PCI if PCI select AR71XX_DEV_GPIO_BUTTONS select AR71XX_DEV_LEDS_GPIO default n diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c index f7e72563f..6da318e2d 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c @@ -10,13 +10,16 @@ * by the Free Software Foundation. */ +#include +#include +#include #include +#include #include "machtype.h" #include "devices.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" -#include "dev-pb42-pci.h" #include "dev-m25p80.h" #define EAP7660D_BUTTONS_POLL_INTERVAL 20 @@ -27,6 +30,75 @@ #define EAP7660D_GPIO_SW1 3 #define EAP7660D_GPIO_SW3 8 #define EAP7660D_PHYMASK BIT(20) +#define EAP7660D_BOARDCONFIG 0x1F7F0000 +#define EAP7660D_GBIC_MAC_OFFSET 0x1000 +#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 +#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 +#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 +#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 + +static struct ath5k_platform_data eap7660d_wmac0_data; +static struct ath5k_platform_data eap7660d_wmac1_data; +static char eap7660d_wmac0_mac[6]; +static char eap7660d_wmac1_mac[6]; +static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; +static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; + +static struct ar71xx_pci_irq eap7660d_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + } +}; + +static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) +{ + switch(PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &eap7660d_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &eap7660d_wmac1_data; + break; + } + + return 0; +} + +void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ + if (cal_data0 && *cal_data0 == 0xa55a) { + memcpy(eap7660d_wmac0_eeprom, cal_data0, + ATH5K_PLAT_EEP_MAX_WORDS); + eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; + } + + if (cal_data1 && *cal_data1 == 0xa55a) { + memcpy(eap7660d_wmac1_eeprom, cal_data1, + ATH5K_PLAT_EEP_MAX_WORDS); + eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; + } + + if (mac_addr0) { + memcpy(eap7660d_wmac0_mac, mac_addr0, sizeof(eap7660d_wmac0_mac)); + eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; + } + + if (mac_addr1) { + memcpy(eap7660d_wmac1_mac, mac_addr1, sizeof(eap7660d_wmac1_mac)); + eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; + } + + ar71xx_pci_plat_dev_init = eap7660d_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(eap7660d_pci_irqs), eap7660d_pci_irqs); +} static struct gpio_led eap7660d_leds_gpio[] __initdata = { { @@ -72,6 +144,8 @@ static struct gpio_button eap7660d_gpio_buttons[] __initdata = { static void __init eap7660d_setup(void) { + u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); + ar71xx_set_mac_base(boardconfig + EAP7660D_GBIC_MAC_OFFSET); ar71xx_add_device_mdio(~EAP7660D_PHYMASK); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK; @@ -82,7 +156,10 @@ static void __init eap7660d_setup(void) ar71xx_add_device_gpio_buttons(-1, EAP7660D_BUTTONS_POLL_INTERVAL, ARRAY_SIZE(eap7660d_gpio_buttons), eap7660d_gpio_buttons); - pb42_pci_init(); + eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, + boardconfig + EAP7660D_WMAC0_MAC_OFFSET, + boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, + boardconfig + EAP7660D_WMAC1_MAC_OFFSET); }; MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", diff --git a/target/linux/ar71xx/files/include/linux/ath5k_platform.h b/target/linux/ar71xx/files/include/linux/ath5k_platform.h new file mode 100644 index 000000000..ec8522452 --- /dev/null +++ b/target/linux/ar71xx/files/include/linux/ath5k_platform.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos + * Copyright (c) 2009 Imre Kaloz + * Copyright (c) 2010 Daniel Golle + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH5K_PLATFORM_H +#define _LINUX_ATH5K_PLATFORM_H + +#define ATH5K_PLAT_EEP_MAX_WORDS 2048 + +struct ath5k_platform_data { + u16 *eeprom_data; + u8 *macaddr; +}; + +#endif /* _LINUX_ATH5K_PLATFORM_H */ -- 2.20.1