format

[stratum0-wiki.git] / RepRap.mw

diff --git a/RepRap.mw b/RepRap.mw
index 67bb937..1feaa3c 100644 (file)
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -20,8 +20,16 @@ Er war nicht gerade billig, deshalb müssen einige Regeln befolgt werden.
 * [[Benutzer:DieLenaMaria|Lena]]
 * [[Benutzer:Marylin|Marylin]]
 * [[Benutzer:Larsan|Larsan]]
 * [[Benutzer:DieLenaMaria|Lena]]
 * [[Benutzer:Marylin|Marylin]]
 * [[Benutzer:Larsan|Larsan]]

+* [[Benutzer:Stew|Stew]]
+* [[Benutzer:Chrissi^|Chrissi^]]
+* Hanhaiwen

 
 

-Druckführerscheinabsolvierungsundeinweisungsvorgang in Arbeit.
+=== Interessierte Entitäten ===
+* {{Benutzer|Joke}}
+* Lulu-Ann
+* --[[Benutzer:Matthis|Matthis]] 16:10, 14. Nov. 2012 (CET)
+
+Druckführerscheinabsolvierungsundeinweisungsvorgang ist in Arbeit. (™)

 
 ==Logbuch==
 Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
 
 ==Logbuch==
 Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.


@@ -31,7 +39,7 @@ Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
 * git://github.com/alexrj/Slic3r.git
 * git://github.com/kliment/Printrun.git
 
 * git://github.com/alexrj/Slic3r.git
 * git://github.com/kliment/Printrun.git
 

-Anmerkung: openscad kompiliert derzeit wegen eines Bugs in der cgal-Bibliothek nicht. Entweder alte Version nutzen, oder diesen Patch auf die cgal-library anwenden und danach openscad kompilieren: http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/sci-mathematics/cgal/files/cgal-4.0-gcc47.patch?view=markup
+* Skeinforge (Alternative zu Slic3r): http://fabmetheus.crsndoo.com/index.php

 
 ==[[Reprap/Modelle|Modelle]]==
 * Stratum0 Mate name tags - http://www.thingiverse.com/thing:23817
 
 ==[[Reprap/Modelle|Modelle]]==
 * Stratum0 Mate name tags - http://www.thingiverse.com/thing:23817


@@ -53,46 +61,48 @@ Anmerkung: openscad kompiliert derzeit wegen eines Bugs in der cgal-Bibliothek n
 * Der erste Layer sollte mit 10°C mehr gedruckt werden
 * Es kann helfen, von Zeit zu Zeit die Version zu updaten
 
 * Der erste Layer sollte mit 10°C mehr gedruckt werden
 * Es kann helfen, von Zeit zu Zeit die Version zu updaten
 

+[[Benutzer:Stew|Stew]] hat eine funktionierende Konfiguration unter [[Reprap/Skeinforge]] eine Kurzanleitung und Konfiguration für Skeinforge abgelegt.
+

 ===[[Reprap/Configs|Konfigurationen für den Slicer]]===
 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
 ==== Von larsan ====
 Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
 
 <pre style="height:200px;overflow:scroll;">
 ===[[Reprap/Configs|Konfigurationen für den Slicer]]===
 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
 ==== Von larsan ====
 Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
 
 <pre style="height:200px;overflow:scroll;">

-# generated by Slic3r 0.9.4-dev on Sat Oct 27 23:12:28 2012
+# generated by Slic3r 0.9.4-dev on Sat Nov  3 17:46:55 2012

 acceleration = 0
 bed_size = 180,200
 bed_temperature = 60
 acceleration = 0
 bed_size = 180,200
 bed_temperature = 60

-bottom_solid_layers = 1
+bottom_solid_layers = 3

 bridge_fan_speed = 100
 bridge_fan_speed = 100

-bridge_flow_ratio = 1
+bridge_flow_ratio = 1.05

 bridge_speed = 60
 brim_width = 0
 bridge_speed = 60
 brim_width = 0

-complete_objects = 0
+complete_objects = 

 cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors

-external_perimeter_speed = 60
+external_perimeter_speed = 100%

 extra_perimeters = 1
 extruder_clearance_height = 20
 extra_perimeters = 1
 extruder_clearance_height = 20

-extruder_clearance_radius = 20
+extruder_clearance_radius = 30

 extruder_offset = 0x0
 extrusion_axis = E
 extruder_offset = 0x0
 extrusion_axis = E

-extrusion_multiplier = 1.0
-extrusion_width = 90%
+extrusion_multiplier = 1.02
+extrusion_width = 100%

 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75
 fill_angle = 45
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75
 fill_angle = 45

-fill_density = 1
-fill_pattern = rectilinear
+fill_density = 0.25
+fill_pattern = honeycomb

 first_layer_bed_temperature = 60
 first_layer_bed_temperature = 60

-first_layer_extrusion_width = 40%
-first_layer_height = 116%
-first_layer_speed = 50%
+first_layer_extrusion_width = 90%
+first_layer_height = 95%
+first_layer_speed = 25%

 first_layer_temperature = 200
 g0 = 0
 gcode_arcs = 0
 first_layer_temperature = 200
 g0 = 0
 gcode_arcs = 0


@@ -101,21 +111,22 @@ gcode_flavor = reprap
 infill_acceleration = 50
 infill_every_layers = 1
 infill_extruder = 1
 infill_acceleration = 50
 infill_every_layers = 1
 infill_extruder = 1

-infill_extrusion_width = 60%
-infill_speed = 60
+infill_extrusion_width = 120%
+infill_speed = 70

 layer_gcode = 
 layer_gcode = 

-layer_height = 0.28
+layer_height = 0.3

 max_fan_speed = 100
 min_fan_speed = 35
 max_fan_speed = 100
 min_fan_speed = 35

-min_print_speed = 10
-notes = Used for Mate name tag
+min_print_speed = 5
+min_skirt_length = 0
+notes = larsanconfig

 nozzle_diameter = 0.35
 only_retract_when_crossing_perimeters = 1
 nozzle_diameter = 0.35
 only_retract_when_crossing_perimeters = 1

-output_filename_format = [input_filename_base].gcode
+output_filename_format = [timestamp]_[input_filename_base].gcode

 perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_acceleration = 25
 perimeter_extruder = 1

-perimeter_extrusion_width = 110%
-perimeter_speed = 60
+perimeter_extrusion_width = 0
+perimeter_speed = 40

 perimeters = 2
 post_process = 
 print_center = 90,100
 perimeters = 2
 post_process = 
 print_center = 90,100


@@ -132,27 +143,28 @@ scale = 1
 skirt_distance = 10
 skirt_height = 1
 skirts = 3
 skirt_distance = 10
 skirt_height = 1
 skirts = 3

-slowdown_below_layer_time = 60
-small_perimeter_speed = 60
+slowdown_below_layer_time = 50
+small_perimeter_speed = 100%

 solid_fill_pattern = rectilinear
 solid_infill_below_area = 0
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 0

-solid_infill_every_layers = 1
-solid_infill_speed = 60
+solid_infill_every_layers = 0
+solid_infill_speed = 100%

 start_gcode = G28 ; home all axes\nM92 E820
 start_gcode = G28 ; home all axes\nM92 E820

-support_material = 
+support_material = 1

 support_material_angle = 45
 support_material_extruder = 1
 support_material_angle = 45
 support_material_extruder = 1

-support_material_extrusion_width = 0
+support_material_extrusion_width = 160%

 support_material_pattern = rectilinear
 support_material_pattern = rectilinear

-support_material_spacing = 2.5
-support_material_threshold = 45
+support_material_spacing = 2
+support_material_threshold = 40

 temperature = 200
 threads = 2
 temperature = 200
 threads = 2

-top_solid_infill_speed = 60
-top_solid_layers = 1
+top_solid_infill_speed = 40%
+top_solid_layers = 2

 travel_speed = 90
 use_relative_e_distances = 0
 z_offset = 0.20
 travel_speed = 90
 use_relative_e_distances = 0
 z_offset = 0.20

+

 </pre>
 
 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
 </pre>
 
 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====


@@ -251,3 +263,105 @@ travel_speed = 140
 use_relative_e_distances = 0
 z_offset = 0.22
 </pre>
 use_relative_e_distances = 0
 z_offset = 0.22
 </pre>

+
+=== von Chrissi^ ===
+* Nette Konfiguration zum Drucken von allem möglichen.
+* First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
+* First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
+<pre  style="height:200px;overflow:scroll;">
+# generated by Slic3r 0.9.3 on Tue Nov  6 21:53:43 2012
+acceleration = 0
+bed_size = 180,200
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1.05
+bridge_speed = 60
+brim_width = 0
+complete_objects = 
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
+external_perimeter_speed = 100%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 30
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 100%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.1
+fill_pattern = rectilinear
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 112%
+first_layer_height = 95%
+first_layer_speed = 15%
+first_layer_temperature = 200
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 120%
+infill_speed = 60
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+notes = larsanconfig
+nozzle_diameter = 0.35
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [timestamp]_[input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_center = 120,120
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 2
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+rotate = 0
+scale = 1
+skirt_distance = 10
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 50
+small_perimeter_speed = 50%
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 1
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 160%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_threshold = 40
+temperature = 205
+threads = 2
+top_solid_infill_speed = 40%
+travel_speed = 90
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+
+ [[Kategorie:Infrastruktur]] ·