+===Konfigurationen für den Slicer===
+Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, aber die von Daniel ist meistens gut geeignet und auch eine gute Ausgangsbasis für Abwandlungen.
+
+==== Von Lena ====
+[[Benutzer:DieLenaMaria|Lena]] hatte, bevor sie Daniels Konfiguration hier gefunden hatte, mal eine komplett eigene Konfiguration gebastelt. Diese erzielt sehr gute Ergebnisse auch bei schwierigen Teilen, ist aber extrem langsam und daher selten zu gebrauchen. Auf Anfrage gibt sie diese aber sicher heraus ;)
+
+Außerdem gibt es eine weitere Konfig von Lena, die auf Daniels beruht und für das Drucken von Gleisen mit [[RepRails]] optimiert ist:
+
+<pre style="height:200px;overflow:scroll;">
+acceleration = 0
+bed_size = 180,190
+bed_temperature = 55
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 50
+complete_objects = 0
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 E0.2\nG1 E0 F3000 ; retract filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 180%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.5
+fill_pattern = concentric
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 0
+first_layer_height = 100%
+first_layer_speed = 40%
+first_layer_temperature = 195
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extrusion_width = 0
+infill_speed = 60
+layer_gcode =
+layer_height = 0.25
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 30
+notes = Setting for new Firmware version\nUsed for almost everything. Bridges well\n\nOrange prints well, transparent prints well at 185 first layer temp and 170 other layers
+nozzle_diameter = 0.35
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_speed = 55
+perimeters = 3
+perimeters_extrusion_width = 0
+post_process =
+print_center = 90,95
+randomize_start = 1
+retract_before_travel = 2
+retract_length = 1
+retract_lift = 0.25
+retract_restart_extra = 0
+retract_speed = 10
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+slowdown_below_layer_time = 30
+small_perimeter_speed = 40
+solid_fill_pattern = rectilinear
+solid_infill_speed = 60
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 0
+support_material_tool = 0
+temperature = 185
+threads = 1
+top_solid_infill_speed = 50
+travel_speed = 145
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+
+==== Für Mate-Tags ====
+Es existiert eine Konfiguration von {{Benutzer|shoragan}}, die für Mate-Tags optimiert ist. Temperaturen auf die entsprechende Farbe und Kunststoffart anpassen!
+<pre style="height:200px;overflow:scroll;">
+acceleration = 0
+bed_size = 200,200
+bed_temperature = 0
+bottom_layer_speed_ratio = 0.8
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width_ratio = 1.6
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.3
+fill_pattern = rectilinear
+first_layer_bed_temperature = 0
+first_layer_height_ratio = 1
+first_layer_temperature = 200
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_speed = 60
+layer_gcode =
+layer_height = 0.25
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+notes = Used for Mate name tag
+nozzle_diameter = 0.35
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_speed = 50
+perimeters = 1
+post_process =
+print_center = 80,80
+retract_before_travel = 2
+retract_length = 1
+retract_lift = 0.25
+retract_restart_extra = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+slowdown_below_layer_time = 60
+small_perimeter_speed = 50
+solid_fill_pattern = rectilinear
+solid_infill_speed = 60
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 0
+support_material_tool = 0
+temperature = 190
+travel_speed = 130
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+
+==== Von Daniel ====
+Gute Basis zum Experimentieren. Auch hier Temperaturen auf die gewählte Farbe und Kunststoffart einstellen!
+<pre style="height:200px;overflow:scroll;">
projects / stratum0-wiki.git / blobdiff