sysinit.c

   1 /**************************************************************************/
   2 /*!
   3     @file     sysinit.c
   4     @author   K. Townsend (microBuilder.eu)
   5     @date     22 March 2010
   6     @version  0.10
   7
   8     @section LICENSE
   9
  10     Software License Agreement (BSD License)
  11
  12     Copyright (c) 2010, microBuilder SARL
  13     All rights reserved.
  14
  15     Redistribution and use in source and binary forms, with or without
  16     modification, are permitted provided that the following conditions are met:
  17     1. Redistributions of source code must retain the above copyright
  18     notice, this list of conditions and the following disclaimer.
  19     2. Redistributions in binary form must reproduce the above copyright
  20     notice, this list of conditions and the following disclaimer in the
  21     documentation and/or other materials provided with the distribution.
  22     3. Neither the name of the copyright holders nor the
  23     names of its contributors may be used to endorse or promote products
  24     derived from this software without specific prior written permission.
  25
  26     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  27     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  28     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  29     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
  30     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  31     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  32     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  33     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  34     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  35     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  36 */
  37 /**************************************************************************/
  38
  39 #include <stdio.h>
  40 #include <stdlib.h>
  41 #include <string.h>
  42
  43 #include "sysinit.h"
  44
  45 #include "core/cpu/cpu.h"
  46 #include "core/pmu/pmu.h"
  47 #include "core/adc/adc.h"
  48
  49 #ifdef CFG_PRINTF_UART
  50   #include "core/uart/uart.h"
  51 #endif
  52
  53 #ifdef CFG_INTERFACE
  54   #include "core/cmd/cmd.h"
  55 #endif
  56
  57 #ifdef CFG_CHIBI
  58   #include "drivers/chibi/chb.h"
  59 #endif
  60
  61 #ifdef CFG_USBHID
  62   #include "core/usbhid-rom/usbhid.h"
  63 #endif
  64
  65 #ifdef CFG_USBCDC
  66   volatile unsigned int lastTick;
  67   #include "core/usbcdc/usb.h"
  68   #include "core/usbcdc/usbcore.h"
  69   #include "core/usbcdc/usbhw.h"
  70   #include "core/usbcdc/cdcuser.h"
  71   #include "core/usbcdc/cdc_buf.h"
  72 #endif
  73
  74 #ifdef CFG_ST7565
  75   #include "drivers/lcd/bitmap/st7565/st7565.h"
  76   #include "drivers/lcd/smallfonts.h"
  77 #endif
  78
  79 #ifdef CFG_SSD1306
  80   #include "drivers/lcd/bitmap/ssd1306/ssd1306.h"
  81   #include "drivers/lcd/smallfonts.h"
  82 #endif
  83
  84 #ifdef CFG_TFTLCD
  85   #include "drivers/lcd/tft/lcd.h"
  86   #include "drivers/lcd/tft/touchscreen.h"
  87   #include "drivers/lcd/tft/drawing.h"
  88 #endif
  89
  90 #ifdef CFG_I2CEEPROM
  91   #include "drivers/eeprom/mcp24aa/mcp24aa.h"
  92   #include "drivers/eeprom/eeprom.h"
  93 #endif
  94
  95 #ifdef CFG_PWM
  96   #include "core/pwm/pwm.h"
  97 #endif
  98
  99 #ifdef CFG_SDCARD
 100   #include "core/ssp/ssp.h"
 101   #include "drivers/fatfs/diskio.h"
 102   #include "drivers/fatfs/ff.h"
 103
 104   DWORD get_fattime ()
 105   {
 106     // ToDo!
 107     return 0;
 108   }
 109 #endif
 110
 111 /**************************************************************************/
 112 /*!
 113     Configures the core system clock and sets up any mandatory
 114     peripherals like the systick timer, UART for printf, etc.
 115
 116     This function should set the HW to the default state you wish to be
 117     in coming out of reset/startup, such as disabling or enabling LEDs,
 118     setting specific pin states, etc.
 119 */
 120 /**************************************************************************/
 121 void systemInit()
 122 {
 123   cpuInit();                                // Configure the CPU
 124   systickInit(CFG_SYSTICK_DELAY_IN_MS);     // Start systick timer
 125   gpioInit();                               // Enable GPIO
 126   pmuInit();                                // Configure power management
 127
 128   // Set LED pin as output and turn LED off
 129   gpioSetDir(CFG_LED_PORT, CFG_LED_PIN, 1);
 130   gpioSetValue(CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
 131
 132   // Config alt reset pin if requested (really only relevant to LPC1343 LCD Board)
 133   #ifdef CFG_ALTRESET
 134     gpioSetDir (CFG_ALTRESET_PORT, CFG_ALTRESET_PIN, gpioDirection_Input);
 135     gpioSetInterrupt (CFG_ALTRESET_PORT, CFG_ALTRESET_PIN, gpioInterruptSense_Level, gpioInterruptEdge_Single, gpioInterruptEvent_ActiveHigh);
 136     gpioIntEnable (CFG_ALTRESET_PORT, CFG_ALTRESET_PIN);
 137   #endif
 138
 139   // Initialise EEPROM
 140   #ifdef CFG_I2CEEPROM
 141     mcp24aaInit();
 142   #endif
 143
 144   // Initialise UART with the default baud rate
 145   #ifdef CFG_PRINTF_UART
 146     #ifdef CFG_I2CEEPROM
 147       uint32_t uart = eepromReadU32(CFG_EEPROM_UART_SPEED);
 148       if ((uart == 0xFFFFFFFF) || (uart > 115200))
 149       {
 150         uartInit(CFG_UART_BAUDRATE);  // Use default baud rate
 151       }
 152       else
 153       {
 154         uartInit(uart);               // Use baud rate from EEPROM
 155       }
 156     #else
 157       uartInit(CFG_UART_BAUDRATE);
 158     #endif
 159   #endif
 160
 161   // Initialise PWM (requires 16-bit Timer 1 and P1.9)
 162   #ifdef CFG_PWM
 163     pwmInit();
 164   #endif
 165
 166   // Initialise USB HID
 167   #ifdef CFG_USBHID
 168     usbHIDInit();
 169   #endif
 170
 171   // Initialise USB CDC
 172   #ifdef CFG_USBCDC
 173     lastTick = systickGetTicks();   // Used to control output/printf timing
 174     CDC_Init();                     // Initialise VCOM
 175     USB_Init();                     // USB Initialization
 176     USB_Connect(TRUE);              // USB Connect
 177     // Wait until USB is configured or timeout occurs
 178     uint32_t usbTimeout = 0;
 179     while ( usbTimeout < CFG_USBCDC_INITTIMEOUT / 10 )
 180     {
 181       if (USB_Configuration) break;
 182       systickDelay(10);             // Wait 10ms
 183       usbTimeout++;
 184     }
 185   #endif
 186
 187   // Printf can now be used with UART or USBCDC
 188
 189   // Initialise the ST7565 128x64 pixel display
 190   #ifdef CFG_ST7565
 191     st7565Init();
 192     st7565ClearScreen();    // Clear the screen
 193     st7565Backlight(1);     // Enable the backlight
 194   #endif
 195
 196   // Initialise the SSD1306 OLED display
 197   #ifdef CFG_SSD1306
 198     ssd1306Init(SSD1306_SWITCHCAPVCC);
 199     ssd1306ClearScreen();   // Clear the screen
 200   #endif
 201
 202   // Initialise TFT LCD Display
 203   #ifdef CFG_TFTLCD
 204     lcdInit();
 205   #endif
 206
 207   // Initialise Chibi
 208   // Warning: CFG_CHIBI must be disabled if no antenna is connected,
 209   // otherwise the SW will halt during initialisation
 210   #ifdef CFG_CHIBI
 211     // Write addresses to EEPROM for the first time if necessary
 212     // uint16_t addr_short = 0x0025;
 213     // uint64_t addr_ieee =  0x0000000000000025;
 214     // mcp24aaWriteBuffer(CFG_EEPROM_CHIBI_SHORTADDR, (uint8_t *)&addr_short, 2);
 215     // mcp24aaWriteBuffer(CFG_EEPROM_CHIBI_IEEEADDR, (uint8_t *)&addr_ieee, 8);
 216     chb_init();
 217     // chb_pcb_t *pcb = chb_get_pcb();
 218     // printf("%-40s : 0x%04X%s", "Chibi Initialised", pcb->src_addr, CFG_PRINTF_NEWLINE);
 219   #endif
 220
 221   // Start the command line interface
 222   #ifdef CFG_INTERFACE
 223     cmdInit();
 224   #endif
 225 }
 226
 227 /**************************************************************************/
 228 /*!
 229     @brief Sends a single byte to a pre-determined peripheral (UART, etc.).
 230
 231     @param[in]  byte
 232                 Byte value to send
 233 */
 234 /**************************************************************************/
 235 void __putchar(const char c)
 236 {
 237   #ifdef CFG_PRINTF_UART
 238     // Send output to UART
 239     uartSendByte(c);
 240   #endif
 241 }
 242
 243 /**************************************************************************/
 244 /*!
 245     @brief Sends a string to a pre-determined end point (UART, etc.).
 246
 247     @param[in]  str
 248                 Text to send
 249
 250     @note This function is only called when using the GCC-compiler
 251           in Codelite or running the Makefile manually.  This function
 252           will not be called when using the C library in Crossworks for
 253           ARM.
 254 */
 255 /**************************************************************************/
 256 int puts(const char * str)
 257 {
 258   // There must be at least 1ms between USB frames (of up to 64 bytes)
 259   // This buffers all data and writes it out from the buffer one frame
 260   // and one millisecond at a time
 261   #ifdef CFG_PRINTF_USBCDC
 262     if (USB_Configuration)
 263     {
 264       while(*str)
 265         cdcBufferWrite(*str++);
 266       // Check if we can flush the buffer now or if we need to wait
 267       unsigned int currentTick = systickGetTicks();
 268       if (currentTick != lastTick)
 269       {
 270         uint8_t frame[64];
 271         uint32_t bytesRead = 0;
 272         while (cdcBufferDataPending())
 273         {
 274           // Read up to 64 bytes as long as possible
 275           bytesRead = cdcBufferReadLen(frame, 64);
 276           USB_WriteEP (CDC_DEP_IN, frame, bytesRead);
 277           systickDelay(1);
 278         }
 279         lastTick = currentTick;
 280       }
 281     }
 282   #else
 283     // Handle output character by character in __putchar
 284     while(*str) __putchar(*str++);
 285   #endif
 286
 287   return 0;
 288 }