drivers/adc/ads1015/ads1015.h

   1 /**************************************************************************/
   2 /*!
   3     @file     ads1015.h
   4     @author   K. Townsend (microBuilder.eu)
   5
   6     @section LICENSE
   7
   8     Software License Agreement (BSD License)
   9
  10     Copyright (c) 2012, K. Townsend
  11     All rights reserved.
  12
  13     Redistribution and use in source and binary forms, with or without
  14     modification, are permitted provided that the following conditions are met:
  15     1. Redistributions of source code must retain the above copyright
  16     notice, this list of conditions and the following disclaimer.
  17     2. Redistributions in binary form must reproduce the above copyright
  18     notice, this list of conditions and the following disclaimer in the
  19     documentation and/or other materials provided with the distribution.
  20     3. Neither the name of the copyright holders nor the
  21     names of its contributors may be used to endorse or promote products
  22     derived from this software without specific prior written permission.
  23
  24     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  25     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  26     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  27     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
  28     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  29     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  30     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  31     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  32     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  33     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  34 */
  35 /**************************************************************************/
  36
  37 #ifndef _ADS1015_H_
  38 #define _ADS1015_H_
  39
  40 #include "projectconfig.h"
  41 #include "core/i2c/i2c.h"
  42
  43 /*=========================================================================
  44     I2C ADDRESS/BITS
  45     -----------------------------------------------------------------------*/
  46     #define ADS1015_ADDRESS                 (0x90)    // 1001 000 shifted left 1 bit = 0x90 (ADDR = GND)
  47     #define ADS1015_READBIT                 (0x01)
  48 /*=========================================================================*/
  49
  50 /*=========================================================================
  51     POINTER REGISTER
  52     -----------------------------------------------------------------------*/
  53     #define ADS1015_REG_POINTER_MASK        (0x03)
  54     #define ADS1015_REG_POINTER_CONVERT     (0x00)
  55     #define ADS1015_REG_POINTER_CONFIG      (0x01)
  56     #define ADS1015_REG_POINTER_LOWTHRESH   (0x02)
  57     #define ADS1015_REG_POINTER_HITHRESH    (0x03)
  58 /*=========================================================================*/
  59
  60 /*=========================================================================
  61     CONFIG REGISTER
  62     -----------------------------------------------------------------------*/
  63     #define ADS1015_REG_CONFIG_OS_MASK      (0x8000)
  64     #define ADS1015_REG_CONFIG_OS_SINGLE    (0x8000)  // Write: Set to start a single-conversion
  65     #define ADS1015_REG_CONFIG_OS_BUSY      (0x0000)  // Read: Bit = 0 when conversion is in progress
  66     #define ADS1015_REG_CONFIG_OS_NOTBUSY   (0x8000)  // Read: Bit = 1 when device is not performing a conversion
  67
  68     #define ADS1015_REG_CONFIG_MUX_MASK     (0x7000)
  69     #define ADS1015_REG_CONFIG_MUX_DIFF_0_1 (0x0000)  // Differential P = AIN0, N = AIN1 (default)
  70     #define ADS1015_REG_CONFIG_MUX_DIFF_0_3 (0x1000)  // Differential P = AIN0, N = AIN3
  71     #define ADS1015_REG_CONFIG_MUX_DIFF_1_3 (0x2000)  // Differential P = AIN1, N = AIN3
  72     #define ADS1015_REG_CONFIG_MUX_DIFF_2_3 (0x3000)  // Differential P = AIN2, N = AIN3
  73     #define ADS1015_REG_CONFIG_MUX_SINGLE_0 (0x4000)  // Single-ended AIN0
  74     #define ADS1015_REG_CONFIG_MUX_SINGLE_1 (0x5000)  // Single-ended AIN1
  75     #define ADS1015_REG_CONFIG_MUX_SINGLE_2 (0x6000)  // Single-ended AIN2
  76     #define ADS1015_REG_CONFIG_MUX_SINGLE_3 (0x7000)  // Single-ended AIN3
  77
  78     #define ADS1015_REG_CONFIG_PGA_MASK     (0x0E00)
  79     #define ADS1015_REG_CONFIG_PGA_6_144V   (0x0000)  // +/-6.144V range
  80     #define ADS1015_REG_CONFIG_PGA_4_096V   (0x0200)  // +/-4.096V range
  81     #define ADS1015_REG_CONFIG_PGA_2_048V   (0x0400)  // +/-2.048V range (default)
  82     #define ADS1015_REG_CONFIG_PGA_1_024V   (0x0600)  // +/-1.024V range
  83     #define ADS1015_REG_CONFIG_PGA_0_512V   (0x0800)  // +/-0.512V range
  84     #define ADS1015_REG_CONFIG_PGA_0_256V   (0x0A00)  // +/-0.256V range
  85
  86     #define ADS1015_REG_CONFIG_MODE_MASK    (0x0100)
  87     #define ADS1015_REG_CONFIG_MODE_CONTIN  (0x0000)  // Continuous conversion mode
  88     #define ADS1015_REG_CONFIG_MODE_SINGLE  (0x0100)  // Power-down single-shot mode (default)
  89
  90     #define ADS1015_REG_CONFIG_DR_MASK      (0x00E0)
  91     #define ADS1015_REG_CONFIG_DR_128SPS    (0x0000)  // 128 samples per second
  92     #define ADS1015_REG_CONFIG_DR_250SPS    (0x0020)  // 250 samples per second
  93     #define ADS1015_REG_CONFIG_DR_490SPS    (0x0040)  // 490 samples per second
  94     #define ADS1015_REG_CONFIG_DR_920SPS    (0x0050)  // 920 samples per second
  95     #define ADS1015_REG_CONFIG_DR_1600SPS   (0x0080)  // 1600 samples per second (default)
  96     #define ADS1015_REG_CONFIG_DR_2400SPS   (0x00A0)  // 2400 samples per second
  97     #define ADS1015_REG_CONFIG_DR_3300SPS   (0x00C0)  // 3300 samples per second
  98
  99     #define ADS1015_REG_CONFIG_CMODE_MASK   (0x0010)
 100     #define ADS1015_REG_CONFIG_CMODE_TRAD   (0x0000)  // Traditional comparator with hysteresis (default)
 101     #define ADS1015_REG_CONFIG_CMODE_WINDOW (0x0010)  // Window comparator
 102
 103     #define ADS1015_REG_CONFIG_CPOL_MASK    (0x0008)
 104     #define ADS1015_REG_CONFIG_CPOL_ACTVLOW (0x0000)  // ALERT/RDY pin is low when active (default)
 105     #define ADS1015_REG_CONFIG_CPOL_ACTVHI  (0x0008)  // ALERT/RDY pin is high when active
 106
 107     #define ADS1015_REG_CONFIG_CLAT_MASK    (0x0004)  // Determines if ALERT/RDY pin latches once asserted
 108     #define ADS1015_REG_CONFIG_CLAT_NONLAT  (0x0000)  // Non-latching comparator (default)
 109     #define ADS1015_REG_CONFIG_CLAT_LATCH   (0x0004)  // Latching comparator
 110
 111     #define ADS1015_REG_CONFIG_CQUE_MASK    (0x0003)
 112     #define ADS1015_REG_CONFIG_CQUE_1CONV   (0x0000)  // Assert ALERT/RDY after one conversions
 113     #define ADS1015_REG_CONFIG_CQUE_2CONV   (0x0001)  // Assert ALERT/RDY after two conversions
 114     #define ADS1015_REG_CONFIG_CQUE_4CONV   (0x0002)  // Assert ALERT/RDY after four conversions
 115     #define ADS1015_REG_CONFIG_CQUE_NONE    (0x0003)  // Disable the comparator and put ALERT/RDY in high state (default)
 116 /*=========================================================================*/
 117
 118 typedef enum
 119 {
 120   ADS1015_ERROR_OK = 0,                // Everything executed normally
 121   ADS1015_ERROR_I2CINIT,               // Unable to initialise I2C
 122   ADS1015_ERROR_I2CBUSY,               // I2C already in use
 123   ADS1015_ERROR_INVALIDCHANNEL,        // Invalid channel specified
 124   ADS1015_ERROR_LAST
 125 }
 126 ads1015Error_t;
 127
 128 ads1015Error_t ads1015Init(void);
 129 ads1015Error_t ads1015ReadADC_SingleEnded(uint8_t channel, uint16_t *value);
 130 ads1015Error_t ads1015ReadADC_Differential_0_1(int16_t *value);
 131 ads1015Error_t ads1015ReadADC_Differential_2_3(int16_t *value);
 132
 133 #endif
 134
 135