Jumprun-Foo in Verzeichnis auf Badge.

[hackover2013-badge-firmware.git] / projectconfig.h

diff --git a/projectconfig.h b/projectconfig.h
index ad7ad82..de7d9c6 100644 (file)
--- a/projectconfig.h
+++ b/projectconfig.h
@@ -110,13 +110,24 @@
 
         microBuilder.eu USB stick 802.15.4 868/915MHz RF transceiver
 
 
         microBuilder.eu USB stick 802.15.4 868/915MHz RF transceiver
 

+    CFG_BRD_LPC1343_OLIMEX_P
+    ==============================
+
+        Simple Olimex LPC1343 breakout board
+
+    CFG_BRD_LPC1343_LPCXPRESSO
+    ==============================
+
+        LPC1343 LPCXpresso board
+

     -----------------------------------------------------------------------*/
     -----------------------------------------------------------------------*/

-    #define CFG_BRD_LPC1343_REFDESIGN
-    // #define CFG_BRD_LPC1343_REFDESIGN_MINIMAL
+// #define CFG_BRD_LPC1343_REFDESIGN
+#define CFG_BRD_LPC1343_REFDESIGN_MINIMAL

     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     // #define CFG_BRD_LPC1343_802154USBSTICK
     // #define CFG_BRD_LPC1343_OLIMEX_P
     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     // #define CFG_BRD_LPC1343_802154USBSTICK
     // #define CFG_BRD_LPC1343_OLIMEX_P

+    // #define CFG_BRD_LPC1343_LPCXPRESSO

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -141,7 +152,7 @@
     ST7565      X X  X  X     X X X X X X X X X     . . . X
     ST7735      . .  .  .     X X X X X X . . .     . . . .
     SHARPMEM    . .  .  .     X X X X . . . . .     . . . .
     ST7565      X X  X  X     X X X X X X X X X     . . . X
     ST7735      . .  .  .     X X X X X X . . .     . . . .
     SHARPMEM    . .  .  .     X X X X . . . . .     . . . .

-    SSD1306     . .  .  .     X X X . X X . . .     . . . .
+    SSD1306 SPI . .  .  .     X X X . X X . . .     . . . .

     SSD1351     . .  .  .     X X X X X . . . .     . . . .
     MCP121      . .  .  .     . . . . . . . . .     . X . .
     PN532 [3]   . .  .  .     . . . . . . . . .     . X X . 
     SSD1351     . .  .  .     X X X X X . . . .     . . . .
     MCP121      . .  .  .     . . . . . . . . .     . X . .
     PN532 [3]   . .  .  .     . . . . . . . . .     . X X . 


@@ -160,14 +171,14 @@
     ST7565      .     .     .     .       .       X X X X     .
     ST7535      .     .     .     .       .       . . . .     .
     SHARPMEM    .     .     .     .       .       . . . .     .
     ST7565      .     .     .     .       .       X X X X     .
     ST7535      .     .     .     .       .       . . . .     .
     SHARPMEM    .     .     .     .       .       . . . .     .

-    SSD1306     .     .     .     .       .       . . . .     .
+    SSD1306 SPI .     .     .     .       .       . . . .     .

     INTERFACE   .     .     .     .       .       . . . .     X[2]
 
     [1]  PMU uses 32-bit Timer 0 for SW wakeup from deep-sleep.  This timer
          can safely be used by other peripherals, but may need to be
          reconfigured when you wakeup from deep-sleep.
     [2]  INTERFACE can be configured to use either USBCDC or UART
     INTERFACE   .     .     .     .       .       . . . .     X[2]
 
     [1]  PMU uses 32-bit Timer 0 for SW wakeup from deep-sleep.  This timer
          can safely be used by other peripherals, but may need to be
          reconfigured when you wakeup from deep-sleep.
     [2]  INTERFACE can be configured to use either USBCDC or UART

-    [3]  3.2 only used when with the I2C bus (for IRQ)
+    [3]  P3.2 is only used with the I2C bus (for IRQ)

 
  **************************************************************************/
 
 
  **************************************************************************/
 


@@ -184,10 +195,13 @@
     ISL12022M (SRAM)            0xAE      1010111x
     LM75B                       0x90      1001000x
     MCP24AA                     0xA0      1010000x
     ISL12022M (SRAM)            0xAE      1010111x
     LM75B                       0x90      1001000x
     MCP24AA                     0xA0      1010000x

-    MCP4725                     0xC0      1100000x
+    MCP4725                     0xC0      1100000x ***
+    TEA5767                     0xC0      1100000x ***

     TSL2561                     0x72      0111001x
     TCS3414                     0x72      0111001x
     PN532                       0x48      0100100x
     TSL2561                     0x72      0111001x
     TCS3414                     0x72      0111001x
     PN532                       0x48      0100100x

+    SSD1306_I2C                 0x78      0111100x  // Assumes SA0 = GND
+    INA219                      0xF0      10000000x // Assumes A0+A1 = GND

 
     [1]  Alternative addresses may exists, but the addresses listed in this
          table are the values used in the code base
 
     [1]  Alternative addresses may exists, but the addresses listed in this
          table are the values used in the code base


@@ -199,7 +213,7 @@
     FIRMWARE VERSION SETTINGS
     -----------------------------------------------------------------------*/
     #define CFG_FIRMWARE_VERSION_MAJOR            (1)
     FIRMWARE VERSION SETTINGS
     -----------------------------------------------------------------------*/
     #define CFG_FIRMWARE_VERSION_MAJOR            (1)

-    #define CFG_FIRMWARE_VERSION_MINOR            (0)
+    #define CFG_FIRMWARE_VERSION_MINOR            (1)

     #define CFG_FIRMWARE_VERSION_REVISION         (0)
 /*=========================================================================*/
 
     #define CFG_FIRMWARE_VERSION_REVISION         (0)
 /*=========================================================================*/
 


@@ -293,6 +307,13 @@
       // #define GPIO_ENABLE_IRQ2
       // #define GPIO_ENABLE_IRQ3
     #endif
       // #define GPIO_ENABLE_IRQ2
       // #define GPIO_ENABLE_IRQ3
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define GPIO_ENABLE_IRQ0
+      #define GPIO_ENABLE_IRQ1
+      // #define GPIO_ENABLE_IRQ2
+      // #define GPIO_ENABLE_IRQ3
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -358,6 +379,11 @@
       #define CFG_UART_BAUDRATE           (115200)
       #define CFG_UART_BUFSIZE            (512)
     #endif
       #define CFG_UART_BAUDRATE           (115200)
       #define CFG_UART_BUFSIZE            (512)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_UART_BAUDRATE           (115200)
+      #define CFG_UART_BUFSIZE            (512)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -393,6 +419,11 @@
       #define CFG_SSP0_SCKPIN_2_11
       // #define CFG_SSP0_SCKPIN_0_6
     #endif
       #define CFG_SSP0_SCKPIN_2_11
       // #define CFG_SSP0_SCKPIN_0_6
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_SSP0_SCKPIN_2_11
+      // #define CFG_SSP0_SCKPIN_0_6
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -435,6 +466,11 @@
       #define ADC_AVERAGING_ENABLE    (0)
       #define ADC_AVERAGING_SAMPLES   (5)
     #endif
       #define ADC_AVERAGING_ENABLE    (0)
       #define ADC_AVERAGING_SAMPLES   (5)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define ADC_AVERAGING_ENABLE    (0)
+      #define ADC_AVERAGING_SAMPLES   (5)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -482,6 +518,13 @@
       #define CFG_LED_ON                  (0)
       #define CFG_LED_OFF                 (1)
     #endif
       #define CFG_LED_ON                  (0)
       #define CFG_LED_OFF                 (1)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_LED_PORT                (0)
+      #define CFG_LED_PIN                 (7)
+      #define CFG_LED_ON                  (0)
+      #define CFG_LED_OFF                 (1)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -543,6 +586,13 @@
       #define CFG_SDCARD_CDPORT           (3)
       #define CFG_SDCARD_CDPIN            (0)
     #endif
       #define CFG_SDCARD_CDPORT           (3)
       #define CFG_SDCARD_CDPIN            (0)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_SDCARD
+      #define CFG_SDCARD_READONLY         (1) // Must be 0 or 1
+      #define CFG_SDCARD_CDPORT           (3)
+      #define CFG_SDCARD_CDPIN            (0)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -567,9 +617,12 @@
                               CDC (see 'puts' in systeminit.c).
 
     -----------------------------------------------------------------------*/
                               CDC (see 'puts' in systeminit.c).
 
     -----------------------------------------------------------------------*/

+#define CFG_USBMSC (1)
+
+

     #define CFG_USB_VID                   (0x239A)
     #define CFG_USB_PID                   (0x1002)
     #define CFG_USB_VID                   (0x239A)
     #define CFG_USB_PID                   (0x1002)

-
+       

     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_USBHID
       #define CFG_USBCDC
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_USBHID
       #define CFG_USBCDC


@@ -617,6 +670,14 @@
       #define CFG_USBCDC_INITTIMEOUT      (5000)
       #define CFG_USBCDC_BUFFERSIZE       (256)
     #endif     
       #define CFG_USBCDC_INITTIMEOUT      (5000)
       #define CFG_USBCDC_BUFFERSIZE       (256)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_USBHID
+      #define CFG_USBCDC
+      #define CFG_USBCDC_BAUDRATE         (115200)
+      #define CFG_USBCDC_INITTIMEOUT      (5000)
+      #define CFG_USBCDC_BUFFERSIZE       (256)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -624,6 +685,7 @@
     PRINTF REDIRECTION
     -----------------------------------------------------------------------
 
     PRINTF REDIRECTION
     -----------------------------------------------------------------------
 

+    CFG_PRINTF_MAXSTRINGSIZE  Maximum size of string buffer for printf

     CFG_PRINTF_UART           Will cause all printf statements to be 
                               redirected to UART
     CFG_PRINTF_USBCDC         Will cause all printf statements to be
     CFG_PRINTF_UART           Will cause all printf statements to be 
                               redirected to UART
     CFG_PRINTF_USBCDC         Will cause all printf statements to be


@@ -635,40 +697,53 @@
     output will be ignored.
     -----------------------------------------------------------------------*/
     #ifdef CFG_BRD_LPC1343_REFDESIGN
     output will be ignored.
     -----------------------------------------------------------------------*/
     #ifdef CFG_BRD_LPC1343_REFDESIGN

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif     
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)
+      // #define CFG_PRINTF_UART
+      #define CFG_PRINTF_USBCDC
+      #define CFG_PRINTF_NEWLINE          "\r\n"
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -712,6 +787,13 @@
                               addition to CFG_INTERFACE_ENABLEIRQ if
                               this is also enabled.  The character used
                               is defined below.
                               addition to CFG_INTERFACE_ENABLEIRQ if
                               this is also enabled.  The character used
                               is defined below.

+    CFG_INTERFACE_LONGSYSINFO If this is set to 1 extra information will
+                              be included in the Sys Info ('V') command
+                              on the CLI. This can be useful when trying
+                              to debug problems on remote HW, or with 
+                              unknown firmware.  It will also use about
+                              0.5KB flash, though, so only enable it is
+                              necessary.

 
     NOTE:                     The command-line interface will use either
                               USB-CDC or UART depending on whether
 
     NOTE:                     The command-line interface will use either
                               USB-CDC or UART depending on whether


@@ -729,6 +811,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL


@@ -742,6 +825,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB


@@ -759,6 +843,7 @@
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART


@@ -776,6 +861,7 @@
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK


@@ -789,6 +875,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P


@@ -802,6 +889,21 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)
+    #endif
+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_INTERFACE
+      #define CFG_INTERFACE_MAXMSGSIZE    (256)
+      #define CFG_INTERFACE_PROMPT        "LPC-P1343 >> "
+      #define CFG_INTERFACE_SILENTMODE    (0)
+      #define CFG_INTERFACE_DROPCR        (0)
+      #define CFG_INTERFACE_ENABLEIRQ     (0)
+      #define CFG_INTERFACE_IRQPORT       (0)
+      #define CFG_INTERFACE_IRQPIN        (7)
+      #define CFG_INTERFACE_SHORTERRORS   (0)
+      #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 /*=========================================================================*/
 
     #endif
 /*=========================================================================*/
 


@@ -878,6 +980,11 @@
       // #define CFG_I2CEEPROM
       #define CFG_I2CEEPROM_SIZE          (3072)
     #endif     
       // #define CFG_I2CEEPROM
       #define CFG_I2CEEPROM_SIZE          (3072)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_I2CEEPROM
+      #define CFG_I2CEEPROM_SIZE          (3072)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -1017,6 +1124,16 @@
       #define CFG_CHIBI_PROMISCUOUS       (0)
       #define CFG_CHIBI_BUFFERSIZE        (128)
     #endif     
       #define CFG_CHIBI_PROMISCUOUS       (0)
       #define CFG_CHIBI_BUFFERSIZE        (128)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_CHIBI
+      #define CFG_CHIBI_MODE              (0)                 // OQPSK_868MHZ
+      #define CFG_CHIBI_POWER             (0xE9)              // CHB_PWR_EU2_3DBM
+      #define CFG_CHIBI_CHANNEL           (0)                 // 868-868.6 MHz
+      #define CFG_CHIBI_PANID             (0x1234)
+      #define CFG_CHIBI_PROMISCUOUS       (0)
+      #define CFG_CHIBI_BUFFERSIZE        (128)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -1036,6 +1153,12 @@
                                 support for larger fonts generated with
                                 Dot Factory 
                                 http://www.pavius.net/downloads/tools/53-the-dot-factory
                                 support for larger fonts generated with
                                 Dot Factory 
                                 http://www.pavius.net/downloads/tools/53-the-dot-factory

+    CFG_TFTLCD_USEAAFONTS       If set to a non-zero value, anti-aliased
+                                fonts will be used instead of regular 1-bit
+                                font.  These result in much higher-
+                                quality text, but the fonts are 2 or 4
+                                times larger than plain bitmap fonts and
+                                take a bit more rendering time to display.

     CFG_TFTLCD_TS_DEFAULTTHRESHOLD  Default minimum threshold to trigger a
                                 touch event with the touch screen (and exit
                                 from 'tsWaitForEvent' in touchscreen.c).
     CFG_TFTLCD_TS_DEFAULTTHRESHOLD  Default minimum threshold to trigger a
                                 touch event with the touch screen (and exit
                                 from 'tsWaitForEvent' in touchscreen.c).


@@ -1056,6 +1179,7 @@
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1063,6 +1187,7 @@
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1070,6 +1195,7 @@
     #if defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB || defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #if defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB || defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1077,6 +1203,7 @@
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1084,9 +1211,18 @@
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif     
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_TFTLCD
+      #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
+      #define CFG_TFTLCD_USEAAFONTS          (0)
+      #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
+      #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -1098,12 +1234,13 @@
                               the 128x64 pixel ST7565 LCD to be included
     CFG_SSD1306               If defined, this will cause drivers for
                               the 128x64 pixel SSD1306 OLED display to be
                               the 128x64 pixel ST7565 LCD to be included
     CFG_SSD1306               If defined, this will cause drivers for
                               the 128x64 pixel SSD1306 OLED display to be

-                              included
+                              included (using bit-banged SPI)

     CFG_SHARPMEM              If defined, this will cause drivers for
                               Sharp Memory Displays to be included
 
     DEPENDENCIES:             ST7565 requires the use of pins 2.1-6.
     DEPENDENCIES:             SSD1306 requires the use of pins 2.1-6.
     CFG_SHARPMEM              If defined, this will cause drivers for
                               Sharp Memory Displays to be included
 
     DEPENDENCIES:             ST7565 requires the use of pins 2.1-6.
     DEPENDENCIES:             SSD1306 requires the use of pins 2.1-6.

+    DEPENDENCIES:             SSD1306_I2C requires the use of pins 2.2.

     DEPENDENCIES:             SHARPMEM requires the use of pins 2.1-4.
     -----------------------------------------------------------------------*/
     // #define CFG_ST7565
     DEPENDENCIES:             SHARPMEM requires the use of pins 2.1-4.
     -----------------------------------------------------------------------*/
     // #define CFG_ST7565


@@ -1149,8 +1286,9 @@
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB && \
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART && \
   !defined CFG_BRD_LPC1343_802154USBSTICK && \
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB && \
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART && \
   !defined CFG_BRD_LPC1343_802154USBSTICK && \

-  !defined CFG_BRD_LPC1343_OLIMEX_P    
-  #error "You must defined a target board (CFG_BRD_LPC1343_REFDESIGN or CFG_BRD_LPC1343_REFDESIGN_MINIMAL or CFG_BRD_LPC1343_TFTLCDSTANDALONE or CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART or CFG_BRD_LPC1343_802154USBSTICK)"
+  !defined CFG_BRD_LPC1343_OLIMEX_P && \
+  !defined CFG_BRD_LPC1343_LPCXPRESSO
+  #error "You must defined a target board (CFG_BRD_LPC1343_REFDESIGN or CFG_BRD_LPC1343_REFDESIGN_MINIMAL or CFG_BRD_LPC1343_TFTLCDSTANDALONE or CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART or CFG_BRD_LPC1343_802154USBSTICK or CFG_BRD_LPC1343_LPCXPRESSO)"

 #endif
 
 #if defined CFG_PRINTF_USBCDC && defined CFG_PRINTF_UART
 #endif
 
 #if defined CFG_PRINTF_USBCDC && defined CFG_PRINTF_UART