-v0.9.3 - Ongoing
+v0.9.8 - Ongoing
================
+- *** Renamed '/drivers/lcd' to '/drivers/display' ***
+- Added driver for HX8340-B based LCDs
+- Added flag to projectconfig.h to disable the default
+ GPIO IRQ Handler functions in code/gpio/gpio.c
+- Added driver for Samsung VFD displays from Adafruit
+- Added average sampling option to projectconfig.h.
+ This allows you to take several readings from the
+ ADC and return the average. Helps reduces one-off
+ peaks and valleys in the ADC at the expense of
+ slower reads.
+ See: "tools/validation/adctest" for more info
+- Added I2C driver for PN532
+- Updated and added PN532 examples at
+ /tools/examples/sensors/PN532
+- updated touchscreen.h to be a bit clearer during
+ calibration, though it can still be much better
+ organised
+- Had to add "__asm volatile("nop");" after pin writes
+ in the ILI9328 driver since some LCDs couldn't
+ keep up with the high-speed writes with bit-banding
+- Fixed I2C clock duty cycle registers
+- Changed I2C buffer size from 32 to 64 bytes (i2c.h)
+- Added CFG_BRD_LPC1343_OLIMEX_P to board selection
+ in projectconfig.h (courtesy PHK)
+- Added SSD1331_COLORORDER_RGB flag to SSD1331.h to
+ select between RGB and BGR color order
+- Added 128x32 support to ssd1306.c and rewrote
+ initialize sequence for 128x32 and 128x64 displays
+- Added driver for Sharp Memory Display
+ /drivers/lcd/bitmap/sharpmem
+- Added SPI Flash example
+ /tools/examples/spiflash/*
+- Added write function to SPI Flash driver
+ /drivers/spiflash/*
+- Added CFG_BRD_LPC1343_REFDESIGN_MINIMAL as a board
+ option in projectconfig.h. Tries to keep the flash
+ use as small as possible by initialising less
+ peripherals in systemInit().
+- Changed CodeLite project files to support real
+ debugging with a Segger J-Link and GDB Server.
+- Fixed issue with USB CDC instantiation for
+ FreeBSD (courtesy PHK)
+- Added experimental SSD1351 OLED driver to
+ /drivers/lcd/tft/hw
+v0.9.5 - 3 August 2011
+======================
+
+- Redid the font rendering code to use DotFactory
+ generated fonts, and update to the latest binary
+ in the /tools folder. All fonts have been
+ re-rendered to accomodate the updated code.
+- Updated clock values in cpu.c for PLL to match FCCO
+ range of 156-320MHz
+- Changed SCB_PLLCTRL_MULT_* to SCB_PLLCTRL_MSEL_* in
+ lpc111x.h to match usermanual
+- Changed SCB_PLLCTRL_DIV_* SCB_PLLCTRL_PSEL_* in
+ lpc111x.h to match usermanual
+- Added inline version of key functions in ili9328.c,
+ which increases the code size ~1.3KB but more than
+ doubles the drawing speed for most drawing functions
+ by avoiding branch operations and pushing and popping
+ the stack multiple times. Inline methods can be
+ toggled with 'ILI9238_USE_INLINE_METHODS'.
+- Fixed IOCON_SWDIO_PIO1_3_FUNC_CT32B1_MAT2 in lpc134x.h
+- Added drawCornerFilled() to drawing.c and LCD CLI
+- Fixed a nasty bug with 'gpioInterruptEvent' in the
+ gpioSetInterrupt function (core/gpio/gpio.c)
- Add drawTriangle() and drawTriangleFilled() to
- drawing.c
+ drawing.c and LCD CLI
- Added cpuReset() to reset the board via AIRCR
- Removed text input dialogue from LCD CLI ('T') to
save a few KB. Command file still exists, just no
projects / hackover2013-badge-firmware.git / blobdiff