X-Git-Url: https://git.rohieb.name/hackover2013-badge-firmware.git/blobdiff_plain/28f6056a1592d14ec7dfcfc7b25441a053b46727..cb0bd1585f0e7ca7fb0f23b571ca558fd810a48f:/badge/main.c diff --git a/badge/main.c b/badge/main.c index d72e643..c62cd7d 100644 --- a/badge/main.c +++ b/badge/main.c @@ -45,6 +45,7 @@ #include "core/pmu/pmu.h" #include "core/wdt/wdt.h" #include "core/gpio/gpio.h" +#include "core/ssp/ssp.h" #include "core/systick/systick.h" #include "core/usbhid-rom/usbmsc.h" @@ -52,45 +53,29 @@ #include "core/cmd/cmd.h" #endif +#include "fahrplan.h" +#include "init.h" +#include "ui/browser.h" #include "ui/display.h" -#include "ui/sprite.h" #include "ui/event.h" +#include "ui/font.h" +#include "ui/menu.h" +#include "ui/sprite.h" +#include "ui/vanity.h" +#include "util/util.h" #include "jumpnrun/jumpnrun.h" -#include "r0ketports.h" -#include "drivers/fatfs/ff.h" - -#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof*(arr)) - -void backlightInit(void) { -#if HW_IS_PROTOTYPE - - - // prototype uses WDT CLKOUT to drive the LCD backlight - // init without a reset - - IOCON_PIO0_1 &= ~(IOCON_PIO0_1_FUNC_MASK); - IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CLKOUT; - - wdtInit(false); - - // use the WDT clock as the default WDT frequency is best frequency - // XXX this register value is missing in lpc1343.h -#define SCB_CLKOUTCLKSEL_SOURCE_WDTCLOCK ((unsigned int) 0x00000002) // Use the WDT clock - - SCB_CLKOUTCLKSEL = SCB_CLKOUTCLKSEL_SOURCE_WDTCLOCK; - - // toggle from LOW to HIGH to update source - SCB_CLKOUTCLKUEN = SCB_CLKOUTCLKUEN_DISABLE; - SCB_CLKOUTCLKUEN = SCB_CLKOUTCLKUEN_UPDATE; - - // divide by 30, to get almost 10 kHz - SCB_CLKOUTCLKDIV = 30; +#include "dataflash/at45db041d.h" +#include "drivers/fatfs/ff.h" -#else +#include "badge/pinconfig.h" +#include +#ifdef R0KET +#include "r0ketports.h" +void rbBacklightInit(void) { /* Enable the clock for CT16B1 */ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT16B1); @@ -113,18 +98,13 @@ void backlightInit(void) { // Enable Step-UP gpioSetDir(RB_PWR_LCDBL, gpioDirection_Output); gpioSetValue(RB_PWR_LCDBL, 0); - - -#endif } void rbInit() { -#if !HW_IS_PROTOTYPE RB_HB0_IO &= ~IOCON_SWDIO_PIO1_3_FUNC_MASK; RB_HB0_IO |= IOCON_SWDIO_PIO1_3_FUNC_GPIO; RB_HB1_IO &= ~IOCON_JTAG_TCK_PIO0_10_FUNC_MASK; RB_HB1_IO |= IOCON_JTAG_TCK_PIO0_10_FUNC_GPIO; -#endif struct { int port; @@ -132,15 +112,6 @@ void rbInit() { uint32_t volatile *reg; gpioPullupMode_t mode; } const input_pins[] = { -#if HW_IS_PROTOTYPE - { RB_BTN0 , &RB_BTN0_IO , gpioPullupMode_PullDown }, - { RB_BTN1 , &RB_BTN1_IO , gpioPullupMode_PullDown }, - { RB_BTN2 , &RB_BTN2_IO , gpioPullupMode_PullDown }, - { RB_BTN3 , &RB_BTN3_IO , gpioPullupMode_PullDown }, - { RB_BTN4 , &RB_BTN4_IO , gpioPullupMode_PullDown }, - { RB_BTN_A , &RB_BTN_A_IO , gpioPullupMode_PullDown }, - { RB_BTN_B , &RB_BTN_B_IO , gpioPullupMode_PullDown }, -#else { RB_BTN0 , &RB_BTN0_IO , gpioPullupMode_PullUp }, { RB_BTN1 , &RB_BTN1_IO , gpioPullupMode_PullUp }, { RB_BTN2 , &RB_BTN2_IO , gpioPullupMode_PullUp }, @@ -149,18 +120,13 @@ void rbInit() { { RB_HB0 , &RB_HB0_IO , gpioPullupMode_PullUp }, { RB_HB1 , &RB_HB1_IO , gpioPullupMode_PullUp }, { RB_PWR_CHRG, &RB_PWR_CHRG_IO, gpioPullupMode_PullUp } -#endif }; - + for(int i = 0; i < ARRAY_SIZE(input_pins); ++i) { gpioSetDir(input_pins[i].port, input_pins[i].pin, gpioDirection_Input); gpioSetPullup(input_pins[i].reg, input_pins[i].mode); } -#if HW_IS_PROTOTYPE - IOCON_JTAG_TMS_PIO1_0 &= ~(IOCON_JTAG_TMS_PIO1_0_FUNC_MASK); - IOCON_JTAG_TMS_PIO1_0 |= IOCON_JTAG_TMS_PIO1_0_FUNC_GPIO; -#else // LED3 zur Bestimmung der Umgebungshelligkeit. gpioSetDir(RB_LED3, gpioDirection_Input); RB_LED3_IO = (RB_LED3_IO & IOCON_PIO1_11_FUNC_MASK) | IOCON_PIO1_11_FUNC_AD7; @@ -168,17 +134,16 @@ void rbInit() { // prepare LEDs IOCON_JTAG_TDI_PIO0_11 &= ~IOCON_JTAG_TDI_PIO0_11_FUNC_MASK; IOCON_JTAG_TDI_PIO0_11 |= IOCON_JTAG_TDI_PIO0_11_FUNC_GPIO; -#endif struct { int port; int pin; int value; } const output_pins[] = { - { RB_PWR_GOOD, 0 }, - { USB_CONNECT, 1 }, - { RB_LCD_CS , 1 }, -#if !HW_IS_PROTOTYPE + { RB_PWR_GOOD , 0 }, + { USB_CONNECT , 1 }, + { RB_LCD_CS , 1 }, + { RB_SPI_CS_DF, 1 }, { RB_SPI_SS2 , 1 }, { RB_SPI_SS3 , 1 }, { RB_SPI_SS4 , 1 }, @@ -191,7 +156,6 @@ void rbInit() { { RB_HB3 , 1 }, { RB_HB4 , 1 }, { RB_HB5 , 1 } -#endif }; for(int i = 0; i < ARRAY_SIZE(output_pins); ++i) { @@ -199,120 +163,104 @@ void rbInit() { gpioSetValue(output_pins[i].port, output_pins[i].pin, output_pins[i].value); } -#if !HW_IS_PROTOTYPE // Set P0.0 to GPIO RB_PWR_LCDBL_IO &= ~RB_PWR_LCDBL_IO_FUNC_MASK; RB_PWR_LCDBL_IO |= RB_PWR_LCDBL_IO_FUNC_GPIO; gpioSetDir ( RB_PWR_LCDBL , gpioDirection_Input); gpioSetPullup(&RB_PWR_LCDBL_IO, gpioPullupMode_Inactive); -#endif - backlightInit(); + rbBacklightInit(); + badge_display_init(); } +#endif -/**************************************************************************/ -/*! - Main program entry point. After reset, normal code execution will - begin here. +static void usbmode(void) { + badge_event_stop(); + + badge_framebuffer fb = { { { 0 } } }; + badge_framebuffer_render_text(&fb, 22, 20, "USB-Modus"); +// badge_framebuffer_render_text(&fb, 10, 35, "Reset to exit"); + badge_framebuffer_render_text(&fb, 16, 35, "Zurück mit"); + badge_framebuffer_render_text(&fb, 32, 45, "Reset"); +/* + badge_framebuffer_render_number(&fb, 23, 50, sizeof(jumpnrun_tile)); + badge_framebuffer_render_number(&fb, 33, 50, sizeof(jumpnrun_item)); + badge_framebuffer_render_number(&fb, 48, 50, sizeof(jumpnrun_enemy)); */ -/**************************************************************************/ -int main(void) -{ - // Configure cpu and mandatory peripherals - //systemInit(); + badge_framebuffer_flush(&fb); - cpuInit(); - systickInit(CFG_SYSTICK_DELAY_IN_MS); + usbMSCInit(); - // pmuInit(); - // adcInit(); - rbInit(); - - // usbMSCInit(); + for(;;) { +// pmuSleep(); + } +} - badge_display_init(); +uint8_t main_menu_show(uint8_t selected) { + // first_visible = 0, weil das Menü so kurz ist. Sollte es + // größer werden: Parameter aus main_menu empfangen und merken. + uint8_t first_visible = 0; + char const *const menu[] = { + "Titelbild", + "Super Hackio", + "Fahrplan", + "USB-Modus" + }; - /* - gpioSetDir(0, 11, gpioDirection_Output); - gpioSetValue(0, 11, 0); - - - { - badge_framebuffer fb; - int res = 0; - FATFS fatvol; - - if(FR_OK == f_mount(0, &fatvol)) { - FIL fil; - if(FR_OK == (res = f_open(&fil, "sshot.dat", FA_OPEN_EXISTING | FA_READ))) { - UINT readbytes; - - if(FR_OK != f_read(&fil, &fb, sizeof(fb), &readbytes)) { - gpioSetDir(RB_LED3, gpioDirection_Output); - gpioSetValue(RB_LED3, 1); - } - - f_close(&fil); - } else { - fb.data[0][0] = res; - gpioSetDir(RB_LED1, gpioDirection_Output); - gpioSetValue(RB_LED1, 1); - } - } else { - gpioSetDir(RB_LED2, gpioDirection_Output); - gpioSetValue(RB_LED2, 1); - } + f_chdir("/"); + return (uint8_t) badge_menu(menu, ARRAY_SIZE(menu), &first_visible, selected); +} - badge_framebuffer_flush(&fb); - } - */ +void main_menu(void) { + uint8_t selected = 0; - badge_event_start(); - /* for(;;) { - if(JUMPNRUN_ERROR == jumpnrun_play("smb.lvl")) { - break; + selected = main_menu_show(selected); + switch(selected) { + case 0: badge_vanity_show(); break; + case 1: jumpnrun_play (); break; + case 2: badge_fahrplan (); break; + case 3: usbmode (); break; } } - */ +} + +int main(void) +{ + cpuInit(); + systickInit(CFG_SYSTICK_DELAY_IN_MS); - uint8_t buttons = 0; + pmuInit(); + // adcInit(); +#ifdef R0KET + rbInit(); +#else + badge_init(); +#endif - for(uint8_t i = 0; ; ++i) { - badge_event_t event = badge_event_wait(); + FATFS fs; + f_mount(0, &fs); - // SCB_CLKOUTCLKDIV = i; +#ifdef USBONLY + if(badge_input_raw() & BADGE_EVENT_KEY_LEFT) { + gpioSetValue(HOB_PORT(HOB_LED_LEFT), HOB_PIN(HOB_LED_LEFT) , 1); + } + if(badge_input_raw() & BADGE_EVENT_KEY_RIGHT) { + gpioSetValue(HOB_PORT(HOB_LED_RIGHT), HOB_PIN(HOB_LED_RIGHT) , 1); + } - switch(badge_event_type(event)) { - case BADGE_EVENT_USER_INPUT: { - buttons = badge_event_current_input_state(); - break; - } - case BADGE_EVENT_GAME_TICK: { - badge_sprite const sp = { 4, 4, (uint8_t const *) "\xff\xff" }; - badge_framebuffer fb = { { { 0xcc } } }; - - /* - for(int i = 0; i < 9 * 96; ++i) { - fb.data[0][i] = 0xbb; - } - */ - - if(buttons & BADGE_EVENT_KEY_UP) { badge_framebuffer_blt(&fb, 30, 10, &sp, 0); } - if(buttons & BADGE_EVENT_KEY_DOWN) { badge_framebuffer_blt(&fb, 30, 50, &sp, 0); } - if(buttons & BADGE_EVENT_KEY_LEFT) { badge_framebuffer_blt(&fb, 10, 30, &sp, 0); } - if(buttons & BADGE_EVENT_KEY_RIGHT) { badge_framebuffer_blt(&fb, 50, 30, &sp, 0); } - if(buttons & BADGE_EVENT_KEY_CENTER){ badge_framebuffer_blt(&fb, 30, 30, &sp, 0); } - if(buttons & BADGE_EVENT_KEY_BTN_A) { badge_framebuffer_blt(&fb, 70, 10, &sp, 0); } - if(buttons & BADGE_EVENT_KEY_BTN_B) { badge_framebuffer_blt(&fb, 70, 50, &sp, 0); } - - badge_framebuffer_flush(&fb); - break; - } - } + for(;;) usbmode(); +#else + if(badge_input_raw() & BADGE_EVENT_KEY_DOWN) { + usbmode(); } + badge_event_start(); + badge_vanity_show(); + main_menu(); +#endif + return 0; }