X-Git-Url: https://git.rohieb.name/hackover2013-badge-firmware.git/blobdiff_plain/3a4d8a99f885909119362e3b9b9b587315d74ad7..637dcc82c8595130b3627c526126946b43c0707a:/projectconfig.h

diff --git a/projectconfig.h b/projectconfig.h
index f0fc30c..de7d9c6 100644
--- a/projectconfig.h
+++ b/projectconfig.h
@@ -121,8 +121,8 @@
         LPC1343 LPCXpresso board
 
     -----------------------------------------------------------------------*/
-    #define CFG_BRD_LPC1343_REFDESIGN
-    // #define CFG_BRD_LPC1343_REFDESIGN_MINIMAL
+// #define CFG_BRD_LPC1343_REFDESIGN
+#define CFG_BRD_LPC1343_REFDESIGN_MINIMAL
     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     // #define CFG_BRD_LPC1343_802154USBSTICK
@@ -195,11 +195,13 @@
     ISL12022M (SRAM)            0xAE      1010111x
     LM75B                       0x90      1001000x
     MCP24AA                     0xA0      1010000x
-    MCP4725                     0xC0      1100000x
+    MCP4725                     0xC0      1100000x ***
+    TEA5767                     0xC0      1100000x ***
     TSL2561                     0x72      0111001x
     TCS3414                     0x72      0111001x
     PN532                       0x48      0100100x
     SSD1306_I2C                 0x78      0111100x  // Assumes SA0 = GND
+    INA219                      0xF0      10000000x // Assumes A0+A1 = GND
 
     [1]  Alternative addresses may exists, but the addresses listed in this
          table are the values used in the code base
@@ -615,9 +617,12 @@
                               CDC (see 'puts' in systeminit.c).
 
     -----------------------------------------------------------------------*/
+#define CFG_USBMSC (1)
+
+
     #define CFG_USB_VID                   (0x239A)
     #define CFG_USB_PID                   (0x1002)
-
+	
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_USBHID
       #define CFG_USBCDC
@@ -782,6 +787,13 @@
                               addition to CFG_INTERFACE_ENABLEIRQ if
                               this is also enabled.  The character used
                               is defined below.
+    CFG_INTERFACE_LONGSYSINFO If this is set to 1 extra information will
+                              be included in the Sys Info ('V') command
+                              on the CLI. This can be useful when trying
+                              to debug problems on remote HW, or with 
+                              unknown firmware.  It will also use about
+                              0.5KB flash, though, so only enable it is
+                              necessary.
 
     NOTE:                     The command-line interface will use either
                               USB-CDC or UART depending on whether
@@ -799,6 +811,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
@@ -812,6 +825,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
@@ -829,6 +843,7 @@
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
@@ -846,6 +861,7 @@
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
@@ -859,6 +875,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 	
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
@@ -872,6 +889,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 
     #ifdef CFG_BRD_LPC1343_LPCXPRESSO
@@ -885,6 +903,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)
     #endif
 /*=========================================================================*/
 
@@ -1160,7 +1179,7 @@
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
-      #define CFG_TFTLCD_USEAAFONTS          (1)
+      #define CFG_TFTLCD_USEAAFONTS          (0)
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
@@ -1176,7 +1195,7 @@
     #if defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB || defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
-      #define CFG_TFTLCD_USEAAFONTS          (1)
+      #define CFG_TFTLCD_USEAAFONTS          (0)
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif