X-Git-Url: https://git.rohieb.name/hackover2013-badge-firmware.git/blobdiff_plain/9d18e10afb2439a6a9ba6978a799259746a837b7..dff476a9010ac763a0595615e3e32f5f48afbc03:/core/gpio/gpio.h?ds=sidebyside

diff --git a/core/gpio/gpio.h b/core/gpio/gpio.h
index 4d8fdf9..ed616d2 100644
--- a/core/gpio/gpio.h
+++ b/core/gpio/gpio.h
@@ -69,8 +69,7 @@ gpioInterruptEdge_t;
 
 /**************************************************************************/
 /*! 
-    Indicates whether the interrupt should be triggered in the rising
-    or falling edge.  ActiveHigh means that a HIGH level on the pin will
+    ActiveHigh means that a HIGH level on the pin will
     trigger an interrupt, ActiveLow means that a LOW level on the pin
     will trigger an interrupt.
 */
@@ -98,15 +97,55 @@ typedef enum gpioPullupMode_e
 }
 gpioPullupMode_t;
 
-void gpioInit (void);
-void gpioSetDir (uint32_t portNum, uint32_t bitPos, gpioDirection_t dir);
-uint32_t gpioGetValue (uint32_t portNum, uint32_t bitPos);
-void gpioSetValue (uint32_t portNum, uint32_t bitPos, uint32_t bitVal);
-void gpioSetInterrupt (uint32_t portNum, uint32_t bitPos, gpioInterruptSense_t sense, gpioInterruptEdge_t edge, gpioInterruptEvent_t event);
-void gpioIntEnable (uint32_t portNum, uint32_t bitPos);
-void gpioIntDisable (uint32_t portNum, uint32_t bitPos);
-uint32_t  gpioIntStatus (uint32_t portNum, uint32_t bitPos);
-void gpioIntClear (uint32_t portNum, uint32_t bitPos);
-void gpioSetPullup (volatile uint32_t *ioconRegister, gpioPullupMode_t mode);
+void        gpioInit          ( void );
+void        gpioSetDir        ( uint32_t portNum, uint32_t bitPos, gpioDirection_t dir );
+void        gpioSetInterrupt  ( uint32_t portNum, uint32_t bitPos, gpioInterruptSense_t sense, gpioInterruptEdge_t edge, gpioInterruptEvent_t event );
+void        gpioIntEnable     ( uint32_t portNum, uint32_t bitPos );
+void        gpioIntDisable    ( uint32_t portNum, uint32_t bitPos );
+uint32_t    gpioIntStatus     ( uint32_t portNum, uint32_t bitPos );
+void        gpioIntClear      ( uint32_t portNum, uint32_t bitPos );
+void        gpioSetPullup     ( volatile uint32_t *ioconRegister, gpioPullupMode_t mode );
+
+/* Inline Functions */
+INLINE uint32_t gpioGetValue ( const uint32_t portNum, const uint32_t bitPos ) INLINE_POST;
+INLINE void     gpioSetValue ( const uint32_t portNum, const uint32_t bitPos, const uint32_t bitVal) INLINE_POST;
+
+/**************************************************************************/
+/*! 
+    @brief Gets the value for a specific port pin
+
+    @param[in]  portNum
+                The port number (0..3)
+    @param[in]  bitPos
+                The bit position (0..31)
+
+    @return     The current value for the specified port pin (0..1)
+*/
+/**************************************************************************/
+INLINE uint32_t gpioGetValue (uint32_t portNum, uint32_t bitPos)
+{
+   // Take advantage of the fact the GPIO registers are bit-banded
+  return (*(pREG32 ((GPIO_GPIO0_BASE + (portNum << 16)) + ((1 << bitPos) << 2)))) & (1 << bitPos) ? 1 : 0;
+}
+
+/**************************************************************************/
+/*! 
+    @brief Sets the value for a specific port pin (only relevant when a
+           pin is configured as output).
+
+    @param[in]  portNum
+                The port number (0..3)
+    @param[in]  bitPos
+                The bit position (0..31)
+    @param[in]  bitValue
+                The value to set for the specified bit (0..1).  0 will set
+                the pin low and 1 will set the pin high.
+*/
+/**************************************************************************/
+INLINE void gpioSetValue (uint32_t portNum, uint32_t bitPos, uint32_t bitVal)
+{
+  // Take advantage of the fact the GPIO registers are bit-banded
+  (*(pREG32 ((GPIO_GPIO0_BASE + (portNum << 16)) + ((1 << bitPos) << 2)))) = bitVal ? 0xFFF : 0;
+}
 
 #endif
\ No newline at end of file