X-Git-Url: https://git.rohieb.name/hackover2013-badge-firmware.git/blobdiff_plain/f4e089227c3748cb8ffdc54c9bb04bd0966a8b87..51243f56fd37dd5b24cbd15e22c8a48bdc4ee41f:/badge/main.c diff --git a/badge/main.c b/badge/main.c index 00b0982..be4ad7a 100644 --- a/badge/main.c +++ b/badge/main.c @@ -43,7 +43,9 @@ #include "core/adc/adc.h" #include "core/cpu/cpu.h" #include "core/pmu/pmu.h" +#include "core/wdt/wdt.h" #include "core/gpio/gpio.h" +#include "core/ssp/ssp.h" #include "core/systick/systick.h" #include "core/usbhid-rom/usbmsc.h" @@ -51,23 +53,31 @@ #include "core/cmd/cmd.h" #endif +#include "init.h" #include "ui/display.h" #include "ui/sprite.h" #include "ui/event.h" +#include "ui/font.h" +#include "util/util.h" #include "jumpnrun/jumpnrun.h" -#include "r0ketports.h" +#include "dataflash/at45db041d.h" + #include "drivers/fatfs/ff.h" -#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof*(arr)) +#include "badge/pinconfig.h" +#include -void backlightInit(void) { +#ifdef R0KET + +#include "r0ketports.h" +void rbBacklightInit(void) { /* Enable the clock for CT16B1 */ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT16B1); /* Configure PIO1.9 as Timer1_16 MAT0 Output */ IOCON_PIO1_9 &= ~IOCON_PIO1_9_FUNC_MASK; - IOCON_PIO1_9 |= IOCON_PIO1_9_FUNC_CT16B1_MAT0; + IOCON_PIO1_9 |= IOCON_PIO1_9_FUNC_CT16B1_MAT0; /* Set default duty cycle (MR1) */ TMR_TMR16B1MR0 = 0; //(0xFFFF * (100 - brightness)) / 100; @@ -96,20 +106,32 @@ void rbInit() { int port; int pin; uint32_t volatile *reg; + gpioPullupMode_t mode; } const input_pins[] = { - { RB_BTN0 , &RB_BTN0_IO }, - { RB_BTN1 , &RB_BTN1_IO }, - { RB_BTN2 , &RB_BTN2_IO }, - { RB_BTN3 , &RB_BTN3_IO }, - { RB_BTN4 , &RB_BTN4_IO }, - { RB_HB0 , &RB_HB0_IO }, - { RB_HB1 , &RB_HB1_IO }, - { RB_PWR_CHRG, &RB_PWR_CHRG_IO } +#ifdef HOB_REV2 + { RB_BTN0 , &RB_BTN0_IO , gpioPullupMode_PullDown }, + { RB_BTN1 , &RB_BTN1_IO , gpioPullupMode_PullDown }, + { RB_BTN2 , &RB_BTN2_IO , gpioPullupMode_PullDown }, + { RB_BTN3 , &RB_BTN3_IO , gpioPullupMode_PullDown }, + { RB_BTN4 , &RB_BTN4_IO , gpioPullupMode_PullDown }, + { RB_HB0 , &RB_HB0_IO , gpioPullupMode_PullDown }, + { RB_HB1 , &RB_HB1_IO , gpioPullupMode_PullDown }, + { RB_PWR_CHRG, &RB_PWR_CHRG_IO, gpioPullupMode_PullDown } +#else + { RB_BTN0 , &RB_BTN0_IO , gpioPullupMode_PullUp }, + { RB_BTN1 , &RB_BTN1_IO , gpioPullupMode_PullUp }, + { RB_BTN2 , &RB_BTN2_IO , gpioPullupMode_PullUp }, + { RB_BTN3 , &RB_BTN3_IO , gpioPullupMode_PullUp }, + { RB_BTN4 , &RB_BTN4_IO , gpioPullupMode_PullUp }, + { RB_HB0 , &RB_HB0_IO , gpioPullupMode_PullUp }, + { RB_HB1 , &RB_HB1_IO , gpioPullupMode_PullUp }, + { RB_PWR_CHRG, &RB_PWR_CHRG_IO, gpioPullupMode_PullUp } +#endif }; - + for(int i = 0; i < ARRAY_SIZE(input_pins); ++i) { gpioSetDir(input_pins[i].port, input_pins[i].pin, gpioDirection_Input); - gpioSetPullup(input_pins[i].reg, gpioPullupMode_PullUp); + gpioSetPullup(input_pins[i].reg, input_pins[i].mode); } // LED3 zur Bestimmung der Umgebungshelligkeit. @@ -125,15 +147,17 @@ void rbInit() { int pin; int value; } const output_pins[] = { - { RB_PWR_GOOD, 0 }, - { USB_CONNECT, 1 }, - { RB_LED0 , 0 }, - { RB_LED1 , 0 }, - { RB_LED2 , 0 }, + { RB_PWR_GOOD , 0 }, + { USB_CONNECT , 1 }, + { RB_LCD_CS , 1 }, + { RB_SPI_CS_DF, 1 }, { RB_SPI_SS2 , 1 }, { RB_SPI_SS3 , 1 }, { RB_SPI_SS4 , 1 }, { RB_SPI_SS5 , 1 }, + { RB_LED0 , 0 }, + { RB_LED1 , 0 }, + { RB_LED2 , 0 }, { RB_LCD_BL , 0 }, { RB_HB2 , 1 }, { RB_HB3 , 1 }, @@ -153,9 +177,11 @@ void rbInit() { gpioSetDir ( RB_PWR_LCDBL , gpioDirection_Input); gpioSetPullup(&RB_PWR_LCDBL_IO, gpioPullupMode_Inactive); - backlightInit(); + rbBacklightInit(); + badge_display_init(); } +#endif /**************************************************************************/ /*! @@ -173,44 +199,47 @@ int main(void) // pmuInit(); // adcInit(); +#ifdef R0KET rbInit(); +#else + badge_init(); +#endif - usbMSCInit(); + /* + nrf_init(); - badge_display_init(); + for(uint8_t i = 1; ; ++i) { + badge_framebuffer fb = { { { 0 } } }; - gpioSetDir(0, 11, gpioDirection_Output); - gpioSetValue(0, 11, 0); + fb.data[2][86] = 0xff; + fb.data[3][87] = nrf_read_reg(R_CONFIG); + fb.data[4][86] = 0xff; + for(uint8_t j = 0; j < i; j += 3) { + fb.data[3][j / 3] = 0xff; + } + + SCB_CLKOUTCLKDIV = i; + badge_framebuffer_flush(&fb); + systickDelay(200); + } + */ + + FATFS fs; + f_mount(0, &fs); { - badge_framebuffer fb; - int res = 0; - FATFS fatvol; - - if(FR_OK == f_mount(0, &fatvol)) { - FIL fil; - if(FR_OK == (res = f_open(&fil, "sshot.dat", FA_OPEN_EXISTING | FA_READ))) { - UINT readbytes; - - if(FR_OK != f_read(&fil, &fb, sizeof(fb), &readbytes)) { - gpioSetDir(RB_LED3, gpioDirection_Output); - gpioSetValue(RB_LED3, 1); - } - - f_close(&fil); - } else { - fb.data[0][0] = res; - gpioSetDir(RB_LED1, gpioDirection_Output); - gpioSetValue(RB_LED1, 1); - } - } else { - gpioSetDir(RB_LED2, gpioDirection_Output); - gpioSetValue(RB_LED2, 1); - } + badge_framebuffer fb = { { { 0 } } }; + + fb.data[0][0] = badge_framebuffer_render_text(&fb, 2, 10, "foobar"); badge_framebuffer_flush(&fb); } + if(badge_input_raw() & BADGE_EVENT_KEY_DOWN) { + usbMSCInit(); + for(;;); + } + badge_event_start(); for(;;) { @@ -219,7 +248,6 @@ int main(void) } } -/* uint8_t buttons = 0; for(uint8_t i = 0; ; ++i) { @@ -232,7 +260,7 @@ int main(void) } case BADGE_EVENT_GAME_TICK: { badge_sprite const sp = { 4, 4, (uint8_t const *) "\xff\xff" }; - badge_framebuffer fb = { { { 0 } } }; + badge_framebuffer fb = { { { 0x80 } } }; if(buttons & BADGE_EVENT_KEY_UP) { badge_framebuffer_blt(&fb, 30, 10, &sp, 0); } if(buttons & BADGE_EVENT_KEY_DOWN) { badge_framebuffer_blt(&fb, 30, 50, &sp, 0); } @@ -247,7 +275,6 @@ int main(void) } } } -*/ return 0; }