From b800aa671160717acc532605e6ad567a0bd9e3e4 Mon Sep 17 00:00:00 2001 From: Kevin Townsend Date: Sun, 2 Oct 2011 20:03:01 +0200 Subject: [PATCH 1/1] Added SPI Flash example --- .../examples/spiflash/erase_write_read/main.c | 160 ++++++++++++++++++ .../spiflash/erase_write_read/readme.txt | 17 ++ 2 files changed, 177 insertions(+) create mode 100644 tools/examples/spiflash/erase_write_read/main.c create mode 100644 tools/examples/spiflash/erase_write_read/readme.txt diff --git a/tools/examples/spiflash/erase_write_read/main.c b/tools/examples/spiflash/erase_write_read/main.c new file mode 100644 index 0000000..76fb3c4 --- /dev/null +++ b/tools/examples/spiflash/erase_write_read/main.c @@ -0,0 +1,160 @@ +/**************************************************************************/ +/*! + @file main.c + @author K. Townsend (microBuilder.eu) + + @section LICENSE + + Software License Agreement (BSD License) + + Copyright (c) 2011, microBuilder SARL + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the copyright holders nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ +/**************************************************************************/ +#include +#include +#include + +#include "projectconfig.h" +#include "sysinit.h" + +#include "core/gpio/gpio.h" +#include "core/systick/systick.h" +#include "drivers/spiflash/spiflash.h" + +#ifdef CFG_INTERFACE + #include "core/cmd/cmd.h" +#endif + +/**************************************************************************/ +/*! + Main program entry point. After reset, normal code execution will + begin here. +*/ +/**************************************************************************/ +int main(void) +{ + // Configure cpu and mandatory peripherals + systemInit(); + + spiflashError_e error; + uint8_t buffer[256]; + + // Wait a few seconds to let people connect to USB CDC to see the output + systickDelay(5000); + + // Initialise SPI, etc. + printf("Initialising flash\r\n"); + spiflashInit(); + + printf("Erasing sector 0 (page 0..15)\r\n"); + error = spiflashEraseSector (0); + if (error) + { + // Check what went wrong + switch (error) + { + case SPIFLASH_ERROR_ADDROUTOFRANGE: + // Specified starting address is out of range + break; + case SPIFLASH_ERROR_TIMEOUT_READY: + // Timeout waiting for ready status (can be pre or post write) + break; + case SPIFLASH_ERROR_PROTECTIONERR: + // Flash is write protected + break; + } + } + + printf("Writing 8 bytes to page 0 (bytes 0..7)\r\n"); + buffer[0] = 0x12; + buffer[1] = 0x34; + buffer[2] = 0x56; + buffer[3] = 0x78; + buffer[4] = 0xAB; + buffer[5] = 0xCD; + buffer[6] = 0xEF; + buffer[7] = 0xAA; + error = spiflashWritePage (0, buffer, 8); + if (error) + { + // Check what went wrong + switch (error) + { + case SPIFLASH_ERROR_ADDROUTOFRANGE: + // Specified starting address is out of range + break; + case SPIFLASH_ERROR_DATAEXCEEDSPAGESIZE: + // Supplied data exceeds max page size + break; + case SPIFLASH_ERROR_PAGEWRITEOVERFLOW: + // The data length plus the start address offset exceeeds page limits + break; + case SPIFLASH_ERROR_TIMEOUT_READY: + // Timeout waiting for ready status (can be pre or post write) + break; + case SPIFLASH_ERROR_PROTECTIONERR: + // Unable to set write latch + break; + } + } + + printf("Reading 16 bytes from page 1 (bytes 0..15)\r\n"); + // Clear buffer just to prove the point + buffer[0] = 0; + buffer[1] = 0; + buffer[2] = 0; + buffer[3] = 0; + buffer[4] = 0; + buffer[5] = 0; + buffer[6] = 0; + buffer[7] = 0; + error = spiflashReadBuffer (0, buffer, 16); + if (error) + { + // Check what went wrong + switch (error) + { + case SPIFLASH_ERROR_ADDROUTOFRANGE: + // Specified starting address is out of range + break; + case SPIFLASH_ERROR_TIMEOUT_READY: + // Timed out waiting for flash to return ready state + break; + case SPIFLASH_ERROR_ADDROVERFLOW: + // Ran over the upper address during read + break; + } + } + + // Display read results + printf("0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X 0x%02X %s", buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5], buffer[6], buffer[7], buffer[8], buffer[9], buffer[10], buffer[11], buffer[12], buffer[13], buffer[14], buffer[15], CFG_PRINTF_NEWLINE); + + while(1) + { + } + + return 0; +} diff --git a/tools/examples/spiflash/erase_write_read/readme.txt b/tools/examples/spiflash/erase_write_read/readme.txt new file mode 100644 index 0000000..0d4ed3b --- /dev/null +++ b/tools/examples/spiflash/erase_write_read/readme.txt @@ -0,0 +1,17 @@ +OVERVIEW +============================================================ +This example will erae one 4KB page of SPI Flash, write +8 bytes worth of data, and then read back 16 bytes of +data to show how all three operations work. + +HOW TO USE THIS EXAMPLE +============================================================ +1.) Connect the SPI Flash to SPI on the LPC1343 + +2.) Configure your terminal software to open the USB COM + port at 115K. + +3.) When the application starts, there is a 5 second delay + (to allow you time to connect via USB CDC), after which + point the device will run through the erase, write, read + sequence once and then wait in an infinite loop. -- 2.20.1