We need to set the gpio line number
[openwrt.git] / target / linux / avr32 / config-2.6.23
1 CONFIG_AP7000_16_BIT_SMC=y
2 # CONFIG_AP7000_32_BIT_SMC is not set
3 # CONFIG_AP7000_8_BIT_SMC is not set
4 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
5 # CONFIG_ATM_DRIVERS is not set
6 # CONFIG_ATMEL_SSC is not set
7 CONFIG_AVR32=y
8 CONFIG_BOARD_ATNGW100=y
9 # CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
10 # CONFIG_BOARD_ATSTK1000 is not set
11 # CONFIG_BROADCOM_PHY is not set
12 # CONFIG_BT is not set
13 CONFIG_CPU_AT32AP7000=y
14 CONFIG_CPU_FREQ=y
15 # CONFIG_CPU_FREQ_DEBUG is not set
16 # CONFIG_CPU_FREQ_STAT is not set
17 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
18 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
19 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
20 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
21 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
22 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
23 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
24 CONFIG_CPU_FREQ_AT32AP=y
25 CONFIG_DW_DMAC=y
26 CONFIG_ENTRY_ADDRESS=0x90000000
27 # CONFIG_FIXED_PHY is not set
28 # CONFIG_GEN_RTC is not set
29 # CONFIG_GPIO_DEV is not set
30 # CONFIG_HZ_100 is not set
31 CONFIG_HZ=250
32 CONFIG_HZ_250=y
33 # CONFIG_HW_RANDOM is not set
34 # CONFIG_I2C is not set
35 # CONFIG_IDE is not set
36 CONFIG_INITRAMFS_SOURCE=""
37 CONFIG_LEDS_GPIO=y
38 CONFIG_MACB=y
39 # CONFIG_MTD_ABSENT is not set
40 CONFIG_MTD_BLKDEVS=y
41 # CONFIG_MTD_BLOCK2MTD is not set
42 CONFIG_MTD_BLOCK=y
43 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
44 CONFIG_MTD_CFI_AMDSTD=y
45 CONFIG_MTD_CFI_I1=y
46 CONFIG_MTD_CFI_I2=y
47 # CONFIG_MTD_CFI_I4 is not set
48 # CONFIG_MTD_CFI_I8 is not set
49 # CONFIG_MTD_CFI_INTELEXT is not set
50 # CONFIG_MTD_CFI_STAA is not set
51 CONFIG_MTD_CFI_UTIL=y
52 CONFIG_MTD_CFI=y
53 CONFIG_MTD_CHAR=y
54 CONFIG_MTD_CMDLINE_PARTS=y
55 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
56 # CONFIG_MTD_CONCAT is not set
57 CONFIG_MTD_DATAFLASH=y
58 # CONFIG_MTD_DEBUG is not set
59 # CONFIG_MTD_DOC2000 is not set
60 # CONFIG_MTD_DOC2001 is not set
61 # CONFIG_MTD_DOC2001PLUS is not set
62 CONFIG_MTD_GEN_PROBE=y
63 # CONFIG_MTD_JEDECPROBE is not set
64 # CONFIG_MTD_M25P80 is not set
65 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
66 CONFIG_MTD_MAP_BANK_WIDTH_1=y
67 CONFIG_MTD_MAP_BANK_WIDTH_2=y
68 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
69 CONFIG_MTD_MAP_BANK_WIDTH_4=y
70 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
71 # CONFIG_MTD_MTDRAM is not set
72 # CONFIG_MTD_NAND is not set
73 # CONFIG_NETDEV_1000 is not set
74 # CONFIG_MTD_OBSOLETE_CHIPS is not set
75 # CONFIG_MTD_ONENAND is not set
76 CONFIG_MTD_PARTITIONS=y
77 # CONFIG_MTD_PHRAM is not set
78 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
79 CONFIG_MTD_PHYSMAP_LEN=0x0
80 CONFIG_MTD_PHYSMAP_START=0x80000000
81 CONFIG_MTD_PHYSMAP=y
82 # CONFIG_MTD_PLATRAM is not set
83 # CONFIG_MTD_RAM is not set
84 # CONFIG_MTD_REDBOOT_PARTS is not set
85 # CONFIG_MTD_ROM is not set
86 # CONFIG_MTD_SLRAM is not set
87 CONFIG_MTD=y
88 # CONFIG_OWNERSHIP_TRACE is not set
89 CONFIG_PHYS_OFFSET=0x10000000
90 CONFIG_PLATFORM_AT32AP=y
91 # CONFIG_QSEMI_PHY is not set
92 # CONFIG_RTC is not set
93 # CONFIG_SERIAL_8250 is not set
94 CONFIG_SERIAL_ATMEL_CONSOLE=y
95 # CONFIG_SERIAL_ATMEL_TTYAT is not set
96 CONFIG_SERIAL_ATMEL=y
97 # CONFIG_SMSC_PHY is not set
98 # CONFIG_SPI_AT25 is not set
99 CONFIG_SPI_ATMEL=y
100 # CONFIG_SPI_BITBANG is not set
101 # CONFIG_SPI_DEBUG is not set
102 CONFIG_SPI_MASTER=y
103 # CONFIG_SPI_SPIDEV is not set
104 # CONFIG_SPI_TLE62X0 is not set
105 CONFIG_SPI=y
106 CONFIG_SUBARCH_AVR32B=y
107 # CONFIG_UNUSED_SYMBOLS is not set
108 # CONFIG_USER_NS is not set
109 # CONFIG_WATCHDOG is not set
This page took 0.052609 seconds and 5 git commands to generate.