target/linux/s3c24xx/patches-2.6.24/1016-gta01-vibrator.patch.patch

   1 From f7ad7d5e90a4ab68e7e25df3bd4a56b6c23f5e45 Mon Sep 17 00:00:00 2001
   2 From: mokopatches <mokopatches@openmoko.org>
   3 Date: Fri, 4 Apr 2008 11:31:55 +0100
   4 Subject: [PATCH] gta01-vibrator.patch
   5  This patch adds driver support for the vibator device of the FIC/OpenMoko
   6  Neo1973 GSM phone. The driver uses the existing LED class driver framework,
   7  since there's a lot of similarity between the LED and the vibrator function.
   8
   9 Signed-off-by: Harald Welte <laforge@openmoko.org>
  10 ---
  11  drivers/leds/Kconfig                 |    8 ++-
  12  drivers/leds/Makefile                |    1 +
  13  drivers/leds/leds-neo1973-vibrator.c |  181 ++++++++++++++++++++++++++++++++++
  14  3 files changed, 189 insertions(+), 1 deletions(-)
  15  create mode 100644 drivers/leds/leds-neo1973-vibrator.c
  16
  17 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
  18 index ec568fa..4579a88 100644
  19 --- a/drivers/leds/Kconfig
  20 +++ b/drivers/leds/Kconfig
  21 @@ -57,7 +57,7 @@ config LEDS_TOSA
  22
  23  config LEDS_S3C24XX
  24         tristate "LED Support for Samsung S3C24XX GPIO LEDs"
  25 -       depends on LEDS_CLASS && ARCH_S3C2410
  26 +       depends on LEDS_CLASS && ARCH_S3C2410 && S3C2410_PWM
  27         help
  28           This option enables support for LEDs connected to GPIO lines
  29           on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
  30 @@ -114,6 +114,12 @@ config LEDS_CM_X270
  31         help
  32           This option enables support for the CM-X270 LEDs.
  33
  34 +config LEDS_NEO1973_VIBRATOR
  35 +       tristate "Vibrator Support for the FIC Neo1973 GSM phone"
  36 +       depends on LEDS_CLASS && MACH_NEO1973
  37 +       help
  38 +         This option enables support for the vibrator on the FIC Neo1973.
  39 +
  40  comment "LED Triggers"
  41
  42  config LEDS_TRIGGERS
  43 diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
  44 index a60de1b..f64332d 100644
  45 --- a/drivers/leds/Makefile
  46 +++ b/drivers/leds/Makefile
  47 @@ -19,6 +19,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE)                += leds-cobalt-qube.o
  48  obj-$(CONFIG_LEDS_COBALT_RAQ)          += leds-cobalt-raq.o
  49  obj-$(CONFIG_LEDS_GPIO)                        += leds-gpio.o
  50  obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
  51 +obj-$(CONFIG_LEDS_NEO1973_VIBRATOR)    += leds-neo1973-vibrator.o
  52
  53  # LED Triggers
  54  obj-$(CONFIG_LEDS_TRIGGER_TIMER)       += ledtrig-timer.o
  55 diff --git a/drivers/leds/leds-neo1973-vibrator.c b/drivers/leds/leds-neo1973-vibrator.c
  56 new file mode 100644
  57 index 0000000..0336e36
  58 --- /dev/null
  59 +++ b/drivers/leds/leds-neo1973-vibrator.c
  60 @@ -0,0 +1,181 @@
  61 +/*
  62 + * LED driver for the vibrator of the FIC Neo1973 GSM Phone
  63 + *
  64 + * (C) 2006-2007 by OpenMoko, Inc.
  65 + * Author: Harald Welte <laforge@openmoko.org>
  66 + * All rights reserved.
  67 + *
  68 + * This program is free software; you can redistribute it and/or modify
  69 + * it under the terms of the GNU General Public License version 2 as
  70 + * published by the Free Software Foundation.
  71 + *
  72 + * Javi Roman <javiroman@kernel-labs.org>:
  73 + *     Implement PWM support for GTA01Bv4 and later
  74 + */
  75 +
  76 +#include <linux/kernel.h>
  77 +#include <linux/init.h>
  78 +#include <linux/platform_device.h>
  79 +#include <linux/leds.h>
  80 +#include <asm/hardware.h>
  81 +#include <asm/mach-types.h>
  82 +#include <asm/arch/pwm.h>
  83 +#include <asm/arch/gta01.h>
  84 +#include <asm/plat-s3c/regs-timer.h>
  85 +
  86 +#define COUNTER 64
  87 +
  88 +struct neo1973_vib_priv {
  89 +       struct led_classdev cdev;
  90 +       unsigned int gpio;
  91 +       struct mutex mutex;
  92 +       unsigned int has_pwm;
  93 +       struct s3c2410_pwm pwm;
  94 +};
  95 +
  96 +static void neo1973_vib_vib_set(struct led_classdev *led_cdev,
  97 +               enum led_brightness value)
  98 +{
  99 +       struct neo1973_vib_priv *vp =
 100 +               container_of(led_cdev, struct neo1973_vib_priv, cdev);
 101 +
 102 +       /*
 103 +        * value == 255 -> 99% duty cycle (full power)
 104 +        * value == 128 -> 50% duty cycle (medium power)
 105 +        * value == 0 -> 0% duty cycle (zero power)
 106 +        */
 107 +       mutex_lock(&vp->mutex);
 108 +       if (vp->has_pwm)
 109 +               s3c2410_pwm_duty_cycle(value/4, &vp->pwm);
 110 +       else {
 111 +               if (value)
 112 +                       s3c2410_gpio_setpin(vp->gpio, 1);
 113 +               else
 114 +                       s3c2410_gpio_setpin(vp->gpio, 0);
 115 +       }
 116 +
 117 +       mutex_unlock(&vp->mutex);
 118 +}
 119 +
 120 +static struct neo1973_vib_priv neo1973_vib_led = {
 121 +       .cdev = {
 122 +               .name = "neo1973:vibrator",
 123 +               .brightness_set = neo1973_vib_vib_set,
 124 +       },
 125 +};
 126 +
 127 +static int neo1973_vib_init_hw(struct neo1973_vib_priv *vp)
 128 +{
 129 +       int rc;
 130 +
 131 +       rc = s3c2410_pwm_init(&vp->pwm);
 132 +       if (rc)
 133 +               return rc;
 134 +
 135 +       vp->pwm.timerid = PWM3;
 136 +       /* use same prescaler as arch/arm/plat-s3c24xx/time.c */
 137 +       vp->pwm.prescaler = (6 - 1) / 2;
 138 +       vp->pwm.divider = S3C2410_TCFG1_MUX3_DIV2;
 139 +       vp->pwm.counter = COUNTER;
 140 +       vp->pwm.comparer = COUNTER;
 141 +
 142 +       rc = s3c2410_pwm_enable(&vp->pwm);
 143 +       if (rc)
 144 +               return rc;
 145 +
 146 +       s3c2410_pwm_start(&vp->pwm);
 147 +
 148 +       return 0;
 149 +}
 150 +
 151 +#ifdef CONFIG_PM
 152 +static int neo1973_vib_suspend(struct platform_device *dev, pm_message_t state)
 153 +{
 154 +       led_classdev_suspend(&neo1973_vib_led.cdev);
 155 +       return 0;
 156 +}
 157 +
 158 +static int neo1973_vib_resume(struct platform_device *dev)
 159 +{
 160 +       struct neo1973_vib_priv *vp = platform_get_drvdata(dev);
 161 +
 162 +       if (vp->has_pwm)
 163 +               neo1973_vib_init_hw(vp);
 164 +
 165 +       led_classdev_resume(&neo1973_vib_led.cdev);
 166 +
 167 +       return 0;
 168 +}
 169 +#endif /* CONFIG_PM */
 170 +
 171 +static int __init neo1973_vib_probe(struct platform_device *pdev)
 172 +{
 173 +       struct resource *r;
 174 +       int rc;
 175 +
 176 +       if (!machine_is_neo1973_gta01())
 177 +               return -EIO;
 178 +
 179 +       r = platform_get_resource(pdev, 0, 0);
 180 +       if (!r || !r->start)
 181 +               return -EIO;
 182 +
 183 +       neo1973_vib_led.gpio = r->start;
 184 +       platform_set_drvdata(pdev, &neo1973_vib_led);
 185 +
 186 +       /* TOUT3 */
 187 +       if (neo1973_vib_led.gpio == S3C2410_GPB3) {
 188 +               rc = neo1973_vib_init_hw(&neo1973_vib_led);
 189 +               if (rc)
 190 +                       return rc;
 191 +
 192 +               s3c2410_pwm_duty_cycle(0, &neo1973_vib_led.pwm);
 193 +               s3c2410_gpio_cfgpin(neo1973_vib_led.gpio, S3C2410_GPB3_TOUT3);
 194 +               neo1973_vib_led.has_pwm = 1;
 195 +       }
 196 +
 197 +       mutex_init(&neo1973_vib_led.mutex);
 198 +
 199 +       return led_classdev_register(&pdev->dev, &neo1973_vib_led.cdev);
 200 +}
 201 +
 202 +static int neo1973_vib_remove(struct platform_device *pdev)
 203 +{
 204 +       if (neo1973_vib_led.has_pwm)
 205 +               s3c2410_pwm_disable(&neo1973_vib_led.pwm);
 206 +
 207 +       led_classdev_unregister(&neo1973_vib_led.cdev);
 208 +
 209 +       mutex_destroy(&neo1973_vib_led.mutex);
 210 +
 211 +       return 0;
 212 +}
 213 +
 214 +static struct platform_driver neo1973_vib_driver = {
 215 +       .probe          = neo1973_vib_probe,
 216 +       .remove         = neo1973_vib_remove,
 217 +#ifdef CONFIG_PM
 218 +       .suspend        = neo1973_vib_suspend,
 219 +       .resume         = neo1973_vib_resume,
 220 +#endif
 221 +       .driver         = {
 222 +               .name           = "neo1973-vibrator",
 223 +       },
 224 +};
 225 +
 226 +static int __init neo1973_vib_init(void)
 227 +{
 228 +       return platform_driver_register(&neo1973_vib_driver);
 229 +}
 230 +
 231 +static void __exit neo1973_vib_exit(void)
 232 +{
 233 +       platform_driver_unregister(&neo1973_vib_driver);
 234 +}
 235 +
 236 +module_init(neo1973_vib_init);
 237 +module_exit(neo1973_vib_exit);
 238 +
 239 +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
 240 +MODULE_DESCRIPTION("FIC Neo1973 vibrator driver");
 241 +MODULE_LICENSE("GPL");
 242 --
 243 1.5.6.5
 244