[adm5120] fix ethernet vlan matrix of the NP28G board (closes: #2387)
[openwrt.git] / target / linux / avr32 / config-2.6.22
1 CONFIG_AP7000_16_BIT_SMC=y
2 # CONFIG_AP7000_32_BIT_SMC is not set
3 # CONFIG_AP7000_8_BIT_SMC is not set
4 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
5 # CONFIG_ATM_DRIVERS is not set
6 CONFIG_AVR32=y
7 CONFIG_BOARD_ATNGW100=y
8 # CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
9 # CONFIG_BOARD_ATSTK1000 is not set
10 # CONFIG_BROADCOM_PHY is not set
11 # CONFIG_BT is not set
12 CONFIG_CPU_AT32AP7000=y
13 CONFIG_CPU_FREQ=y
14 # CONFIG_CPU_FREQ_DEBUG is not set
15 # CONFIG_CPU_FREQ_STAT is not set
16 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
17 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
18 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
19 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
20 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
21 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
22 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
23 CONFIG_CPU_FREQ_AT32AP=y
24 CONFIG_DW_DMAC=y
25 CONFIG_ENTRY_ADDRESS=0x90000000
26 # CONFIG_FIXED_PHY is not set
27 # CONFIG_GEN_RTC is not set
28 # CONFIG_GPIO_DEV is not set
29 # CONFIG_HZ_100 is not set
30 CONFIG_HZ=250
31 CONFIG_HZ_250=y
32 # CONFIG_HW_RANDOM is not set
33 # CONFIG_I2C is not set
34 # CONFIG_IDE is not set
35 CONFIG_INITRAMFS_SOURCE=""
36 CONFIG_LEDS_GPIO=y
37 CONFIG_MACB=y
38 # CONFIG_MTD_ABSENT is not set
39 CONFIG_MTD_BLKDEVS=y
40 # CONFIG_MTD_BLOCK2MTD is not set
41 CONFIG_MTD_BLOCK=y
42 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
43 CONFIG_MTD_CFI_AMDSTD=y
44 CONFIG_MTD_CFI_I1=y
45 CONFIG_MTD_CFI_I2=y
46 # CONFIG_MTD_CFI_I4 is not set
47 # CONFIG_MTD_CFI_I8 is not set
48 # CONFIG_MTD_CFI_INTELEXT is not set
49 # CONFIG_MTD_CFI_STAA is not set
50 CONFIG_MTD_CFI_UTIL=y
51 CONFIG_MTD_CFI=y
52 CONFIG_MTD_CHAR=y
53 CONFIG_MTD_CMDLINE_PARTS=y
54 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
55 # CONFIG_MTD_CONCAT is not set
56 CONFIG_MTD_DATAFLASH=y
57 # CONFIG_MTD_DEBUG is not set
58 # CONFIG_MTD_DOC2000 is not set
59 # CONFIG_MTD_DOC2001 is not set
60 # CONFIG_MTD_DOC2001PLUS is not set
61 CONFIG_MTD_GEN_PROBE=y
62 # CONFIG_MTD_JEDECPROBE is not set
63 # CONFIG_MTD_M25P80 is not set
64 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
65 CONFIG_MTD_MAP_BANK_WIDTH_1=y
66 CONFIG_MTD_MAP_BANK_WIDTH_2=y
67 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
68 CONFIG_MTD_MAP_BANK_WIDTH_4=y
69 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
70 # CONFIG_MTD_MTDRAM is not set
71 # CONFIG_MTD_NAND is not set
72 # CONFIG_NETDEV_1000 is not set
73 # CONFIG_MTD_OBSOLETE_CHIPS is not set
74 # CONFIG_MTD_ONENAND is not set
75 CONFIG_MTD_PARTITIONS=y
76 # CONFIG_MTD_PHRAM is not set
77 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
78 CONFIG_MTD_PHYSMAP_LEN=0x0
79 CONFIG_MTD_PHYSMAP_START=0x80000000
80 CONFIG_MTD_PHYSMAP=y
81 # CONFIG_MTD_PLATRAM is not set
82 # CONFIG_MTD_RAM is not set
83 # CONFIG_MTD_REDBOOT_PARTS is not set
84 # CONFIG_MTD_ROM is not set
85 # CONFIG_MTD_SLRAM is not set
86 CONFIG_MTD=y
87 # CONFIG_OWNERSHIP_TRACE is not set
88 CONFIG_PHYS_OFFSET=0x10000000
89 CONFIG_PLATFORM_AT32AP=y
90 # CONFIG_QSEMI_PHY is not set
91 # CONFIG_RTC is not set
92 # CONFIG_SERIAL_8250 is not set
93 CONFIG_SERIAL_ATMEL_CONSOLE=y
94 # CONFIG_SERIAL_ATMEL_TTYAT is not set
95 CONFIG_SERIAL_ATMEL=y
96 # CONFIG_SMSC_PHY is not set
97 # CONFIG_SPI_AT25 is not set
98 CONFIG_SPI_ATMEL=y
99 # CONFIG_SPI_BITBANG is not set
100 # CONFIG_SPI_DEBUG is not set
101 CONFIG_SPI_MASTER=y
102 # CONFIG_SPI_SPIDEV is not set
103 CONFIG_SPI=y
104 CONFIG_SUBARCH_AVR32B=y
105 # CONFIG_UNUSED_SYMBOLS is not set
106 # CONFIG_WATCHDOG is not set
This page took 0.047276 seconds and 5 git commands to generate.