target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c

   1 /*
   2  *  D-Link DIR-825 rev. B1 board support
   3  *
   4  *  Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
   5  *
   6  *  based on mach-wndr3700.c
   7  *
   8  *  This program is free software; you can redistribute it and/or modify it
   9  *  under the terms of the GNU General Public License version 2 as published
  10  *  by the Free Software Foundation.
  11  */
  12
  13 #include <linux/platform_device.h>
  14 #include <linux/mtd/mtd.h>
  15 #include <linux/mtd/partitions.h>
  16 #include <linux/delay.h>
  17 #include <linux/rtl8366.h>
  18
  19 #include <asm/mach-ar71xx/ar71xx.h>
  20
  21 #include "machtype.h"
  22 #include "devices.h"
  23 #include "dev-m25p80.h"
  24 #include "dev-ap94-pci.h"
  25 #include "dev-gpio-buttons.h"
  26 #include "dev-leds-gpio.h"
  27 #include "dev-usb.h"
  28
  29 #define DIR825B1_GPIO_LED_BLUE_USB              0
  30 #define DIR825B1_GPIO_LED_ORANGE_POWER          1
  31 #define DIR825B1_GPIO_LED_BLUE_POWER            2
  32 #define DIR825B1_GPIO_LED_BLUE_WPS              4
  33 #define DIR825B1_GPIO_LED_ORANGE_PLANET         6
  34 #define DIR825B1_GPIO_LED_BLUE_PLANET           11
  35
  36 #define DIR825B1_GPIO_BTN_RESET                 3
  37 #define DIR825B1_GPIO_BTN_WPS                   8
  38
  39 #define DIR825B1_GPIO_RTL8366_SDA               5
  40 #define DIR825B1_GPIO_RTL8366_SCK               7
  41
  42 #define DIR825B1_KEYS_POLL_INTERVAL             20      /* msecs */
  43 #define DIR825B1_KEYS_DEBOUNCE_INTERVAL         (3 * DIR825B1_KEYS_POLL_INTERVAL)
  44
  45 #define DIR825B1_CAL_LOCATION_0                 0x1f661000
  46 #define DIR825B1_CAL_LOCATION_1                 0x1f665000
  47
  48 #define DIR825B1_MAC_LOCATION_0                 0x2ffa81b8
  49 #define DIR825B1_MAC_LOCATION_1                 0x2ffa8370
  50
  51 #ifdef CONFIG_MTD_PARTITIONS
  52 static struct mtd_partition dir825b1_partitions[] = {
  53         {
  54                 .name           = "uboot",
  55                 .offset         = 0,
  56                 .size           = 0x040000,
  57                 .mask_flags     = MTD_WRITEABLE,
  58         }, {
  59                 .name           = "config",
  60                 .offset         = 0x040000,
  61                 .size           = 0x010000,
  62                 .mask_flags     = MTD_WRITEABLE,
  63         }, {
  64                 .name           = "firmware",
  65                 .offset         = 0x050000,
  66                 .size           = 0x610000,
  67         }, {
  68                 .name           = "caldata",
  69                 .offset         = 0x660000,
  70                 .size           = 0x010000,
  71                 .mask_flags     = MTD_WRITEABLE,
  72         }, {
  73                 .name           = "unknown",
  74                 .offset         = 0x670000,
  75                 .size           = 0x190000,
  76                 .mask_flags     = MTD_WRITEABLE,
  77         }
  78 };
  79 #endif /* CONFIG_MTD_PARTITIONS */
  80
  81 static struct flash_platform_data dir825b1_flash_data = {
  82 #ifdef CONFIG_MTD_PARTITIONS
  83         .parts          = dir825b1_partitions,
  84         .nr_parts       = ARRAY_SIZE(dir825b1_partitions),
  85 #endif
  86 };
  87
  88 static struct gpio_led dir825b1_leds_gpio[] __initdata = {
  89         {
  90                 .name           = "dir825b1:blue:usb",
  91                 .gpio           = DIR825B1_GPIO_LED_BLUE_USB,
  92                 .active_low     = 1,
  93         }, {
  94                 .name           = "dir825b1:orange:power",
  95                 .gpio           = DIR825B1_GPIO_LED_ORANGE_POWER,
  96                 .active_low     = 1,
  97         }, {
  98                 .name           = "dir825b1:blue:power",
  99                 .gpio           = DIR825B1_GPIO_LED_BLUE_POWER,
 100                 .active_low     = 1,
 101         }, {
 102                 .name           = "dir825b1:blue:wps",
 103                 .gpio           = DIR825B1_GPIO_LED_BLUE_WPS,
 104                 .active_low     = 1,
 105         }, {
 106                 .name           = "dir825b1:orange:planet",
 107                 .gpio           = DIR825B1_GPIO_LED_ORANGE_PLANET,
 108                 .active_low     = 1,
 109         }, {
 110                 .name           = "dir825b1:blue:planet",
 111                 .gpio           = DIR825B1_GPIO_LED_BLUE_PLANET,
 112                 .active_low     = 1,
 113         }
 114 };
 115
 116 static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
 117         {
 118                 .desc           = "reset",
 119                 .type           = EV_KEY,
 120                 .code           = KEY_RESTART,
 121                 .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
 122                 .gpio           = DIR825B1_GPIO_BTN_RESET,
 123                 .active_low     = 1,
 124         }, {
 125                 .desc           = "wps",
 126                 .type           = EV_KEY,
 127                 .code           = KEY_WPS_BUTTON,
 128                 .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
 129                 .gpio           = DIR825B1_GPIO_BTN_WPS,
 130                 .active_low     = 1,
 131         }
 132 };
 133
 134 static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
 135         { .reg = 0x06, .val = 0x0108 },
 136 };
 137
 138 static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
 139         .gpio_sda       = DIR825B1_GPIO_RTL8366_SDA,
 140         .gpio_sck       = DIR825B1_GPIO_RTL8366_SCK,
 141         .num_initvals   = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
 142         .initvals       = dir825b1_rtl8366s_initvals,
 143 };
 144
 145 static struct platform_device dir825b1_rtl8366s_device = {
 146         .name           = RTL8366S_DRIVER_NAME,
 147         .id             = -1,
 148         .dev = {
 149                 .platform_data  = &dir825b1_rtl8366s_data,
 150         }
 151 };
 152
 153 static void __init dir825b1_setup(void)
 154 {
 155         u8 *mac = (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1);
 156
 157         ar71xx_add_device_mdio(0x0);
 158
 159         ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1);
 160         ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
 161         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 162         ar71xx_eth0_data.speed = SPEED_1000;
 163         ar71xx_eth0_data.duplex = DUPLEX_FULL;
 164         ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
 165
 166         ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
 167         ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
 168         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 169         ar71xx_eth1_data.phy_mask = 0x10;
 170         ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
 171
 172         ar71xx_add_device_eth(0);
 173         ar71xx_add_device_eth(1);
 174
 175         ar71xx_add_device_m25p80(&dir825b1_flash_data);
 176
 177         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
 178                                         dir825b1_leds_gpio);
 179
 180         ar71xx_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
 181                                          ARRAY_SIZE(dir825b1_gpio_keys),
 182                                          dir825b1_gpio_keys);
 183
 184         ar71xx_add_device_usb();
 185
 186         platform_device_register(&dir825b1_rtl8366s_device);
 187
 188         ap94_pci_setup_wmac_led_pin(0, 5);
 189         ap94_pci_setup_wmac_led_pin(1, 5);
 190
 191         ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
 192                       (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),
 193                       (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
 194                       (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1));
 195 }
 196
 197 MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
 198              dir825b1_setup);