27da5fc449e36f225592d74fcc9c0e3e65105505
[openwrt.git] / target / linux / brcm47xx / patches-2.6.28 / 700-ssb-gigabit-ethernet-driver.patch
1 --- a/drivers/net/tg3.c
2 +++ b/drivers/net/tg3.c
3 @@ -40,6 +40,7 @@
4 #include <linux/workqueue.h>
5 #include <linux/prefetch.h>
6 #include <linux/dma-mapping.h>
7 +#include <linux/ssb/ssb_driver_gige.h>
8
9 #include <net/checksum.h>
10 #include <net/ip.h>
11 @@ -428,8 +429,9 @@ static void _tw32_flush(struct tg3 *tp,
12 static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
13 {
14 tp->write32_mbox(tp, off, val);
15 - if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
16 - !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
17 + if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
18 + (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
19 + !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
20 tp->read32_mbox(tp, off);
21 }
22
23 @@ -439,7 +441,7 @@ static void tg3_write32_tx_mbox(struct t
24 writel(val, mbox);
25 if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
26 writel(val, mbox);
27 - if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
28 + if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES))
29 readl(mbox);
30 }
31
32 @@ -711,7 +713,7 @@ static void tg3_switch_clocks(struct tg3
33
34 #define PHY_BUSY_LOOPS 5000
35
36 -static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
37 +static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
38 {
39 u32 frame_val;
40 unsigned int loops;
41 @@ -725,7 +727,7 @@ static int tg3_readphy(struct tg3 *tp, i
42
43 *val = 0x0;
44
45 - frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
46 + frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
47 MI_COM_PHY_ADDR_MASK);
48 frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
49 MI_COM_REG_ADDR_MASK);
50 @@ -760,7 +762,12 @@ static int tg3_readphy(struct tg3 *tp, i
51 return ret;
52 }
53
54 -static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
55 +static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
56 +{
57 + return __tg3_readphy(tp, PHY_ADDR, reg, val);
58 +}
59 +
60 +static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
61 {
62 u32 frame_val;
63 unsigned int loops;
64 @@ -776,7 +783,7 @@ static int tg3_writephy(struct tg3 *tp,
65 udelay(80);
66 }
67
68 - frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
69 + frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
70 MI_COM_PHY_ADDR_MASK);
71 frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
72 MI_COM_REG_ADDR_MASK);
73 @@ -809,6 +816,11 @@ static int tg3_writephy(struct tg3 *tp,
74 return ret;
75 }
76
77 +static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
78 +{
79 + return __tg3_writephy(tp, PHY_ADDR, reg, val);
80 +}
81 +
82 static int tg3_bmcr_reset(struct tg3 *tp)
83 {
84 u32 phy_control;
85 @@ -2232,8 +2244,10 @@ static int tg3_set_power_state(struct tg
86 tg3_frob_aux_power(tp);
87
88 /* Workaround for unstable PLL clock */
89 - if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
90 - (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
91 + if ((tp->phy_id & PHY_ID_MASK != PHY_ID_BCM5750_2) &&
92 + /* !!! FIXME !!! */
93 + ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
94 + (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
95 u32 val = tr32(0x7d00);
96
97 val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
98 @@ -2725,6 +2739,14 @@ relink:
99
100 tg3_phy_copper_begin(tp);
101
102 + if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
103 + current_link_up = 1;
104 + current_speed = SPEED_1000; //FIXME
105 + current_duplex = DUPLEX_FULL;
106 + tp->link_config.active_speed = current_speed;
107 + tp->link_config.active_duplex = current_duplex;
108 + }
109 +
110 tg3_readphy(tp, MII_BMSR, &tmp);
111 if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
112 (tmp & BMSR_LSTATUS))
113 @@ -5659,6 +5681,11 @@ static int tg3_poll_fw(struct tg3 *tp)
114 int i;
115 u32 val;
116
117 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
118 + /* We don't use firmware. */
119 + return 0;
120 + }
121 +
122 if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
123 /* Wait up to 20ms for init done. */
124 for (i = 0; i < 200; i++) {
125 @@ -5902,6 +5929,14 @@ static int tg3_chip_reset(struct tg3 *tp
126 tw32(0x5000, 0x400);
127 }
128
129 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
130 + /* BCM4785: In order to avoid repercussions from using potentially
131 + * defective internal ROM, stop the Rx RISC CPU, which is not
132 + * required. */
133 + tg3_stop_fw(tp);
134 + tg3_halt_cpu(tp, RX_CPU_BASE);
135 + }
136 +
137 tw32(GRC_MODE, tp->grc_mode);
138
139 if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
140 @@ -6176,9 +6211,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
141 return -ENODEV;
142 }
143
144 - /* Clear firmware's nvram arbitration. */
145 - if (tp->tg3_flags & TG3_FLAG_NVRAM)
146 - tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
147 + if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
148 + /* Clear firmware's nvram arbitration. */
149 + if (tp->tg3_flags & TG3_FLAG_NVRAM)
150 + tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
151 + }
152 +
153 return 0;
154 }
155
156 @@ -6259,6 +6297,11 @@ static int tg3_load_5701_a0_firmware_fix
157 struct fw_info info;
158 int err, i;
159
160 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
161 + /* We don't use firmware. */
162 + return 0;
163 + }
164 +
165 info.text_base = TG3_FW_TEXT_ADDR;
166 info.text_len = TG3_FW_TEXT_LEN;
167 info.text_data = &tg3FwText[0];
168 @@ -6817,6 +6860,11 @@ static int tg3_load_tso_firmware(struct
169 unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
170 int err, i;
171
172 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
173 + /* We don't use firmware. */
174 + return 0;
175 + }
176 +
177 if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
178 return 0;
179
180 @@ -7776,6 +7824,11 @@ static void tg3_timer(unsigned long __op
181
182 spin_lock(&tp->lock);
183
184 + if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
185 + /* BCM4785: Flush posted writes from GbE to host memory. */
186 + tr32(HOSTCC_MODE);
187 + }
188 +
189 if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
190 /* All of this garbage is because when using non-tagged
191 * IRQ status the mailbox/status_block protocol the chip
192 @@ -9469,6 +9522,11 @@ static int tg3_test_nvram(struct tg3 *tp
193 __le32 *buf;
194 int i, j, k, err = 0, size;
195
196 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
197 + /* We don't have NVRAM. */
198 + return 0;
199 + }
200 +
201 if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
202 return -EIO;
203
204 @@ -10262,7 +10320,7 @@ static int tg3_ioctl(struct net_device *
205 return -EAGAIN;
206
207 spin_lock_bh(&tp->lock);
208 - err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
209 + err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
210 spin_unlock_bh(&tp->lock);
211
212 data->val_out = mii_regval;
213 @@ -10281,7 +10339,7 @@ static int tg3_ioctl(struct net_device *
214 return -EAGAIN;
215
216 spin_lock_bh(&tp->lock);
217 - err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
218 + err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
219 spin_unlock_bh(&tp->lock);
220
221 return err;
222 @@ -10759,6 +10817,12 @@ static void __devinit tg3_get_5906_nvram
223 /* Chips other than 5700/5701 use the NVRAM for fetching info. */
224 static void __devinit tg3_nvram_init(struct tg3 *tp)
225 {
226 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
227 + /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
228 + tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
229 + return;
230 + }
231 +
232 tw32_f(GRC_EEPROM_ADDR,
233 (EEPROM_ADDR_FSM_RESET |
234 (EEPROM_DEFAULT_CLOCK_PERIOD <<
235 @@ -10900,6 +10964,9 @@ static int tg3_nvram_read(struct tg3 *tp
236 {
237 int ret;
238
239 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
240 + return -ENODEV;
241 +
242 if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
243 return tg3_nvram_read_using_eeprom(tp, offset, val);
244
245 @@ -11147,6 +11214,9 @@ static int tg3_nvram_write_block(struct
246 {
247 int ret;
248
249 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
250 + return -ENODEV;
251 +
252 if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
253 tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
254 ~GRC_LCLCTRL_GPIO_OUTPUT1);
255 @@ -12205,7 +12275,6 @@ static int __devinit tg3_get_invariants(
256 tp->write32 = tg3_write_flush_reg32;
257 }
258
259 -
260 if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
261 (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
262 tp->write32_tx_mbox = tg3_write32_tx_mbox;
263 @@ -12241,6 +12310,11 @@ static int __devinit tg3_get_invariants(
264 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
265 tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
266
267 + if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
268 + tp->write32_tx_mbox = tg3_write_flush_reg32;
269 + tp->write32_rx_mbox = tg3_write_flush_reg32;
270 + }
271 +
272 /* Get eeprom hw config before calling tg3_set_power_state().
273 * In particular, the TG3_FLG2_IS_NIC flag must be
274 * determined before calling tg3_set_power_state() so that
275 @@ -12640,6 +12714,10 @@ static int __devinit tg3_get_device_addr
276 }
277
278 if (!is_valid_ether_addr(&dev->dev_addr[0])) {
279 + if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
280 + ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
281 + }
282 + if (!is_valid_ether_addr(&dev->dev_addr[0])) {
283 #ifdef CONFIG_SPARC
284 if (!tg3_get_default_macaddr_sparc(tp))
285 return 0;
286 @@ -13131,6 +13209,7 @@ static char * __devinit tg3_phy_string(s
287 case PHY_ID_BCM5704: return "5704";
288 case PHY_ID_BCM5705: return "5705";
289 case PHY_ID_BCM5750: return "5750";
290 + case PHY_ID_BCM5750_2: return "5750-2";
291 case PHY_ID_BCM5752: return "5752";
292 case PHY_ID_BCM5714: return "5714";
293 case PHY_ID_BCM5780: return "5780";
294 @@ -13317,6 +13396,13 @@ static int __devinit tg3_init_one(struct
295 tp->msg_enable = tg3_debug;
296 else
297 tp->msg_enable = TG3_DEF_MSG_ENABLE;
298 + if (pdev_is_ssb_gige_core(pdev)) {
299 + tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
300 + if (ssb_gige_must_flush_posted_writes(pdev))
301 + tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
302 + if (ssb_gige_have_roboswitch(pdev))
303 + tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
304 + }
305
306 /* The word/byte swap controls here control register access byte
307 * swapping. DMA data byte swapping is controlled in the GRC_MODE
308 --- a/drivers/net/tg3.h
309 +++ b/drivers/net/tg3.h
310 @@ -2516,6 +2516,9 @@ struct tg3 {
311 #define TG3_FLG3_RGMII_STD_IBND_DISABLE 0x00000100
312 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200
313 #define TG3_FLG3_RGMII_EXT_IBND_TX_EN 0x00000400
314 +#define TG3_FLG3_IS_SSB_CORE 0x00000800
315 +#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00001000
316 +#define TG3_FLG3_ROBOSWITCH 0x00002000
317
318 struct timer_list timer;
319 u16 timer_counter;
320 @@ -2574,6 +2577,7 @@ struct tg3 {
321 #define PHY_ID_BCM5714 0x60008340
322 #define PHY_ID_BCM5780 0x60008350
323 #define PHY_ID_BCM5755 0xbc050cc0
324 +#define PHY_ID_BCM5750_2 0xbc050cd0
325 #define PHY_ID_BCM5787 0xbc050ce0
326 #define PHY_ID_BCM5756 0xbc050ed0
327 #define PHY_ID_BCM5784 0xbc050fa0
328 @@ -2613,7 +2617,7 @@ struct tg3 {
329 (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
330 (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
331 (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
332 - (X) == PHY_ID_BCM8002)
333 + (X) == PHY_ID_BCM8002 || (X) == PHY_ID_BCM5750_2)
334
335 struct tg3_hw_stats *hw_stats;
336 dma_addr_t stats_mapping;
This page took 0.055232 seconds and 3 git commands to generate.