target/linux/at91-2.6/patches/001-vlink-machine.patch

   1 diff -Naur linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S linux/arch/arm/boot/compressed/head-at91rm9200.S
   2 --- linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S   2006-12-11 20:32:53.000000000 +0100
   3 +++ linux/arch/arm/boot/compressed/head-at91rm9200.S    2007-01-20 10:26:21.000000000 +0100
   4 @@ -61,6 +61,12 @@
   5                 cmp     r7, r3
   6                 beq     99f
   7
   8 +    @ FDL Versalink : 1053
   9 +    mov   r3, #(MACH_TYPE_VLINK & 0xff)
  10 +    orr r3, r3, #(MACH_TYPE_VLINK & 0xff00)
  11 +    cmp r7, r3
  12 +    beq 99f
  13 +
  14                 @ Ajeco 1ARM : 1075
  15                 mov     r3,     #(MACH_TYPE_ONEARM & 0xff)
  16                 orr     r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
  17 diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c linux/arch/arm/mach-at91rm9200/board-vlink.c
  18 --- linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c       1970-01-01 01:00:00.000000000 +0100
  19 +++ linux/arch/arm/mach-at91rm9200/board-vlink.c        2007-01-19 21:18:00.000000000 +0100
  20 @@ -0,0 +1,144 @@
  21 +/*
  22 + * linux/arch/arm/mach-at91rm9200/board-ek.c
  23 + *
  24 + *  Copyright (C) 2006,2007 Hamish Guthrie
  25 + *                          Guthrie Consulting.
  26 + *
  27 + * This program is free software; you can redistribute it and/or modify
  28 + * it under the terms of the GNU General Public License as published by
  29 + * the Free Software Foundation; either version 2 of the License, or
  30 + * (at your option) any later version.
  31 + *
  32 + * This program is distributed in the hope that it will be useful,
  33 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
  34 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  35 + * GNU General Public License for more details.
  36 + *
  37 + * You should have received a copy of the GNU General Public License
  38 + * along with this program; if not, write to the Free Software
  39 + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  40 + */
  41 +
  42 +#include <linux/types.h>
  43 +#include <linux/init.h>
  44 +#include <linux/mm.h>
  45 +#include <linux/module.h>
  46 +#include <linux/platform_device.h>
  47 +#include <linux/spi/spi.h>
  48 +
  49 +#include <asm/hardware.h>
  50 +#include <asm/setup.h>
  51 +#include <asm/mach-types.h>
  52 +#include <asm/irq.h>
  53 +
  54 +#include <asm/mach/arch.h>
  55 +#include <asm/mach/map.h>
  56 +#include <asm/mach/irq.h>
  57 +
  58 +#include <asm/arch/board.h>
  59 +#include <asm/arch/gpio.h>
  60 +
  61 +#include "generic.h"
  62 +
  63 +
  64 +/*
  65 + * Serial port configuration.
  66 + *    0 .. 3 = USART0 .. USART3
  67 + *    4      = DBGU
  68 + */
  69 +static struct at91_uart_config __initdata vlink_uart_config = {
  70 +       .console_tty    = 0,                            /* ttyS0 */
  71 +       .nr_tty         = 5,
  72 +       .tty_map        = { 4, 1, 0, 3, 2 }             /* ttyS0, ..., ttyS4 */
  73 +};
  74 +
  75 +static void __init vlink_map_io(void)
  76 +{
  77 +       /* Initialize processor: 18.432 MHz crystal */
  78 +       at91rm9200_initialize(18432000, AT91RM9200_PQFP);
  79 +
  80 +       /* Setup the LEDs */
  81 +//     at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
  82 +
  83 +       /* Setup the serial ports and console */
  84 +       at91_init_serial(&vlink_uart_config);
  85 +}
  86 +
  87 +static void __init vlink_init_irq(void)
  88 +{
  89 +       at91rm9200_init_interrupts(NULL);
  90 +}
  91 +
  92 +static struct eth_platform_data __initdata vlink_eth_data = {
  93 +       .phy_irq_pin    = AT91_PIN_PC4,
  94 +       .is_rmii        = 1,
  95 +};
  96 +
  97 +static struct at91_usbh_data __initdata vlink_usbh_data = {
  98 +       .ports          = 1,
  99 +};
 100 +
 101 +static struct at91_udc_data __initdata vlink_udc_data = {
 102 +       .vbus_pin       = AT91_PIN_PD4,
 103 +       .pullup_pin     = AT91_PIN_PD5,
 104 +};
 105 +
 106 +/*static struct at91_mmc_data __initdata ek_mmc_data = {
 107 +       .det_pin        = AT91_PIN_PB27,
 108 +       .is_b           = 0,
 109 +       .wire4          = 1,
 110 +       .wp_pin         = AT91_PIN_PA17,
 111 +};
 112 +*/
 113 +
 114 +static struct spi_board_info vlink_spi_devices[] = {
 115 +       {       /* DataFlash chip */
 116 +               .modalias       = "mtd_dataflash",
 117 +               .chip_select    = 0,
 118 +               .max_speed_hz   = 15 * 1000 * 1000,
 119 +       },
 120 +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
 121 +       {       /* DataFlash card */
 122 +               .modalias       = "mtd_dataflash",
 123 +               .chip_select    = 3,
 124 +               .max_speed_hz   = 15 * 1000 * 1000,
 125 +       },
 126 +#endif
 127 +};
 128 +
 129 +static void __init vlink_board_init(void)
 130 +{
 131 +       /* Serial */
 132 +       at91_add_device_serial();
 133 +       /* Ethernet */
 134 +       at91_add_device_eth(&vlink_eth_data);
 135 +       /* USB Host */
 136 +       at91_add_device_usbh(&vlink_usbh_data);
 137 +       /* USB Device */
 138 +       at91_add_device_udc(&vlink_udc_data);
 139 +       at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);     /* pullup_pin is connected to reset */
 140 +       /* I2C */
 141 +       at91_add_device_i2c();
 142 +       /* SPI */
 143 +       at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
 144 +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
 145 +       /* DataFlash card */
 146 +//     at91_set_gpio_output(AT91_PIN_PB22, 0);
 147 +#else
 148 +       /* MMC */
 149 +//     at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
 150 +//     at91_add_device_mmc(&vlink_mmc_data);
 151 +#endif
 152 +       /* VGA */
 153 +}
 154 +
 155 +MACHINE_START(VLINK, "FDL VersaLink")
 156 +       /* Maintainer: Guthrie Consulting */
 157 +       .phys_io        = AT91_BASE_SYS,
 158 +       .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 159 +       .boot_params    = AT91_SDRAM_BASE + 0x100,
 160 +       .timer          = &at91rm9200_timer,
 161 +       .map_io         = vlink_map_io,
 162 +       .init_irq       = vlink_init_irq,
 163 +       .init_machine   = vlink_board_init,
 164 +MACHINE_END
 165 diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig linux/arch/arm/mach-at91rm9200/Kconfig
 166 --- linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig     2006-12-11 20:32:53.000000000 +0100
 167 +++ linux/arch/arm/mach-at91rm9200/Kconfig      2007-01-19 21:17:49.000000000 +0100
 168 @@ -82,6 +82,12 @@
 169         help
 170           Select this if you are using Sperry-Sun's KAFA board.
 171
 172 +config MACH_VLINK
 173 +       bool "Figment Design Labs VersaLink"
 174 +       depends on ARCH_AT91RM9200
 175 +       help
 176 +               Select this if you are using FDL's VersaLink board
 177 +
 178  endif
 179
 180  # ----------------------------------------------------------
 181 diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile linux/arch/arm/mach-at91rm9200/Makefile
 182 --- linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile    2006-12-11 20:32:53.000000000 +0100
 183 +++ linux/arch/arm/mach-at91rm9200/Makefile     2007-01-19 21:17:42.000000000 +0100
 184 @@ -24,6 +24,7 @@
 185  obj-$(CONFIG_MACH_KB9200)      += board-kb9202.o
 186  obj-$(CONFIG_MACH_ATEB9200)    += board-eb9200.o
 187  obj-$(CONFIG_MACH_KAFA)                += board-kafa.o
 188 +obj-$(CONFIG_MACH_VLINK)  += board-vlink.o
 189
 190  # AT91SAM9260 board-specific support
 191