generic: rtl8366: move common VLAN handling functions to rtl8366_smi.c
[openwrt.git] / target / linux / brcm47xx / patches-2.6.32 / 940-bcm47xx-yenta.patch
1 --- a/drivers/pcmcia/yenta_socket.c
2 +++ b/drivers/pcmcia/yenta_socket.c
3 @@ -866,6 +866,8 @@ static unsigned int yenta_probe_irq(stru
4 * Probe for usable interrupts using the force
5 * register to generate bogus card status events.
6 */
7 +#ifndef CONFIG_BCM47XX
8 + /* WRT54G3G does not like this */
9 cb_writel(socket, CB_SOCKET_EVENT, -1);
10 cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
11 exca_writeb(socket, I365_CSCINT, 0);
12 @@ -880,6 +882,7 @@ static unsigned int yenta_probe_irq(stru
13 }
14 cb_writel(socket, CB_SOCKET_MASK, 0);
15 exca_writeb(socket, I365_CSCINT, 0);
16 +#endif
17
18 mask = probe_irq_mask(val) & 0xffff;
19
20 @@ -960,6 +963,10 @@ static void yenta_get_socket_capabilitie
21 else
22 socket->socket.irq_mask = 0;
23
24 + /* irq mask probing is broken for the WRT54G3G */
25 + if (socket->socket.irq_mask == 0)
26 + socket->socket.irq_mask = 0x6f8;
27 +
28 dev_printk(KERN_INFO, &socket->dev->dev,
29 "ISA IRQ mask 0x%04x, PCI irq %d\n",
30 socket->socket.irq_mask, socket->cb_irq);
31 @@ -1198,6 +1205,15 @@ static int __devinit yenta_probe (struct
32 dev_printk(KERN_INFO, &dev->dev,
33 "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
34
35 + /* Generate an interrupt on card insert/remove */
36 + config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
37 +
38 + /* Set up Multifunction Routing Status Register */
39 + config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
40 +
41 + /* Switch interrupts to parallelized */
42 + config_writeb(socket, 0x92, 0x64);
43 +
44 yenta_fixup_parent_bridge(dev->subordinate);
45
46 /* Register it with the pcmcia layer.. */
This page took 0.047834 seconds and 5 git commands to generate.