projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
backport mv88e6095 support for orion - this also fixes the non-working switch-port...
[openwrt.git] / target / linux / generic-2.4 / patches / 228-more_usb_fixes.patch
1 Index: linux-2.4.35.4/drivers/scsi/hosts.c
2 ===================================================================
3 --- linux-2.4.35.4.orig/drivers/scsi/hosts.c
4 +++ linux-2.4.35.4/drivers/scsi/hosts.c
5 @@ -107,8 +107,21 @@ scsi_unregister(struct Scsi_Host * sh){
6 if (shn) shn->host_registered = 0;
7 /* else {} : This should not happen, we should panic here... */
8
9 + /* If we are removing the last host registered, it is safe to reuse
10 + * its host number (this avoids "holes" at boot time) (DB)
11 + * It is also safe to reuse those of numbers directly below which have
12 + * been released earlier (to avoid some holes in numbering).
13 + */
14 + if(sh->host_no == max_scsi_hosts - 1) {
15 + while(--max_scsi_hosts >= next_scsi_host) {
16 + shpnt = scsi_hostlist;
17 + while(shpnt && shpnt->host_no != max_scsi_hosts - 1)
18 + shpnt = shpnt->next;
19 + if(shpnt)
20 + break;
21 + }
22 + }
23 next_scsi_host--;
24 -
25 kfree((char *) sh);
26 }
27
28 Index: linux-2.4.35.4/drivers/usb/hcd.c
29 ===================================================================
30 --- linux-2.4.35.4.orig/drivers/usb/hcd.c
31 +++ linux-2.4.35.4/drivers/usb/hcd.c
32 @@ -1105,7 +1105,8 @@ static int hcd_submit_urb (struct urb *u
33 break;
34 case PIPE_BULK:
35 allowed |= USB_DISABLE_SPD | USB_QUEUE_BULK
36 - | USB_ZERO_PACKET | URB_NO_INTERRUPT;
37 + | USB_ZERO_PACKET | URB_NO_INTERRUPT
38 + | URB_NO_TRANSFER_DMA_MAP;
39 break;
40 case PIPE_INTERRUPT:
41 allowed |= USB_DISABLE_SPD;
42 @@ -1212,7 +1213,8 @@ static int hcd_submit_urb (struct urb *u
43 urb->setup_packet,
44 sizeof (struct usb_ctrlrequest),
45 PCI_DMA_TODEVICE);
46 - if (urb->transfer_buffer_length != 0)
47 + if (urb->transfer_buffer_length != 0
48 + && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
49 urb->transfer_dma = pci_map_single (
50 hcd->pdev,
51 urb->transfer_buffer,
52 Index: linux-2.4.35.4/drivers/usb/host/ehci-hcd.c
53 ===================================================================
54 --- linux-2.4.35.4.orig/drivers/usb/host/ehci-hcd.c
55 +++ linux-2.4.35.4/drivers/usb/host/ehci-hcd.c
56 @@ -399,6 +399,27 @@ static int ehci_start (struct usb_hcd *h
57 ehci_mem_cleanup (ehci);
58 return retval;
59 }
60 +
61 +{
62 + int misc_reg;
63 + u32 vendor_id;
64 +
65 + pci_read_config_dword (ehci->hcd.pdev, PCI_VENDOR_ID, &vendor_id);
66 + if (vendor_id == 0x31041106) {
67 + /* VIA 6212 */
68 + printk(KERN_INFO "EHCI: Enabling VIA 6212 workarounds\n", misc_reg);
69 + pci_read_config_byte(ehci->hcd.pdev, 0x49, &misc_reg);
70 + misc_reg &= ~0x20;
71 + pci_write_config_byte(ehci->hcd.pdev, 0x49, misc_reg);
72 + pci_read_config_byte(ehci->hcd.pdev, 0x49, &misc_reg);
73 +
74 + pci_read_config_byte(ehci->hcd.pdev, 0x4b, &misc_reg);
75 + misc_reg |= 0x20;
76 + pci_write_config_byte(ehci->hcd.pdev, 0x4b, misc_reg);
77 + pci_read_config_byte(ehci->hcd.pdev, 0x4b, &misc_reg);
78 + }
79 +}
80 +
81 writel (INTR_MASK, &ehci->regs->intr_enable);
82 writel (ehci->periodic_dma, &ehci->regs->frame_list);
83
84 Index: linux-2.4.35.4/drivers/usb/host/ehci-q.c
85 ===================================================================
86 --- linux-2.4.35.4.orig/drivers/usb/host/ehci-q.c
87 +++ linux-2.4.35.4/drivers/usb/host/ehci-q.c
88 @@ -791,6 +791,8 @@ static void qh_link_async (struct ehci_h
89 writel (cmd, &ehci->regs->command);
90 ehci->hcd.state = USB_STATE_RUNNING;
91 /* posted write need not be known to HC yet ... */
92 +
93 + timer_action (ehci, TIMER_IO_WATCHDOG);
94 }
95 }
96
97 Index: linux-2.4.35.4/drivers/usb/host/usb-uhci.c
98 ===================================================================
99 --- linux-2.4.35.4.orig/drivers/usb/host/usb-uhci.c
100 +++ linux-2.4.35.4/drivers/usb/host/usb-uhci.c
101 @@ -3034,6 +3034,21 @@ uhci_pci_probe (struct pci_dev *dev, con
102
103 pci_set_master(dev);
104
105 + {
106 + u8 misc_reg;
107 + u32 vendor_id;
108 +
109 + pci_read_config_dword (dev, PCI_VENDOR_ID, &vendor_id);
110 + if (vendor_id == 0x30381106) {
111 + /* VIA 6212 */
112 + printk(KERN_INFO "UHCI: Enabling VIA 6212 workarounds\n");
113 + pci_read_config_byte(dev, 0x41, &misc_reg);
114 + misc_reg &= ~0x10;
115 + pci_write_config_byte(dev, 0x41, misc_reg);
116 + pci_read_config_byte(dev, 0x41, &misc_reg);
117 + }
118 + }
119 +
120 /* Search for the IO base address.. */
121 for (i = 0; i < 6; i++) {
122
123 Index: linux-2.4.35.4/drivers/usb/storage/transport.c
124 ===================================================================
125 --- linux-2.4.35.4.orig/drivers/usb/storage/transport.c
126 +++ linux-2.4.35.4/drivers/usb/storage/transport.c
127 @@ -54,6 +54,22 @@
128 #include <linux/sched.h>
129 #include <linux/errno.h>
130 #include <linux/slab.h>
131 +#include <linux/pci.h>
132 +#include "../hcd.h"
133 +
134 +/* These definitions mirror those in pci.h, so they can be used
135 + * interchangeably with their PCI_ counterparts */
136 +enum dma_data_direction {
137 + DMA_BIDIRECTIONAL = 0,
138 + DMA_TO_DEVICE = 1,
139 + DMA_FROM_DEVICE = 2,
140 + DMA_NONE = 3,
141 +};
142 +
143 +#define dma_map_sg(d,s,n,dir) pci_map_sg(d,s,n,dir)
144 +#define dma_unmap_sg(d,s,n,dir) pci_unmap_sg(d,s,n,dir)
145 +
146 +
147
148 /***********************************************************************
149 * Helper routines
150 @@ -554,6 +570,543 @@ int usb_stor_transfer_partial(struct us_
151 return US_BULK_TRANSFER_SHORT;
152 }
153
154 +/*-------------------------------------------------------------------*/
155 +/**
156 + * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
157 + * @dev: device to which the scatterlist will be mapped
158 + * @pipe: endpoint defining the mapping direction
159 + * @sg: the scatterlist to unmap
160 + * @n_hw_ents: the positive return value from usb_buffer_map_sg
161 + *
162 + * Reverses the effect of usb_buffer_map_sg().
163 + */
164 +static void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
165 + struct scatterlist *sg, int n_hw_ents)
166 +{
167 + struct usb_bus *bus;
168 + struct usb_hcd *hcd;
169 + struct pci_dev *pdev;
170 +
171 + if (!dev
172 + || !(bus = dev->bus)
173 + || !(hcd = bus->hcpriv)
174 + || !(pdev = hcd->pdev)
175 + || !pdev->dma_mask)
176 + return;
177 +
178 + dma_unmap_sg (pdev, sg, n_hw_ents,
179 + usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
180 +}
181 +
182 +/**
183 + * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
184 + * @dev: device to which the scatterlist will be mapped
185 + * @pipe: endpoint defining the mapping direction
186 + * @sg: the scatterlist to map
187 + * @nents: the number of entries in the scatterlist
188 + *
189 + * Return value is either < 0 (indicating no buffers could be mapped), or
190 + * the number of DMA mapping array entries in the scatterlist.
191 + *
192 + * The caller is responsible for placing the resulting DMA addresses from
193 + * the scatterlist into URB transfer buffer pointers, and for setting the
194 + * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs.
195 + *
196 + * Top I/O rates come from queuing URBs, instead of waiting for each one
197 + * to complete before starting the next I/O. This is particularly easy
198 + * to do with scatterlists. Just allocate and submit one URB for each DMA
199 + * mapping entry returned, stopping on the first error or when all succeed.
200 + * Better yet, use the usb_sg_*() calls, which do that (and more) for you.
201 + *
202 + * This call would normally be used when translating scatterlist requests,
203 + * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it
204 + * may be able to coalesce mappings for improved I/O efficiency.
205 + *
206 + * Reverse the effect of this call with usb_buffer_unmap_sg().
207 + */
208 +static int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
209 + struct scatterlist *sg, int nents)
210 +{
211 + struct usb_bus *bus;
212 + struct usb_hcd *hcd;
213 + struct pci_dev *pdev;
214 +
215 + if (!dev
216 + || usb_pipecontrol (pipe)
217 + || !(bus = dev->bus)
218 + || !(hcd = bus->hcpriv)
219 + || !(pdev = hcd->pdev)
220 + || !pdev->dma_mask)
221 + return -1;
222 +
223 + // FIXME generic api broken like pci, can't report errors
224 + return dma_map_sg (pdev, sg, nents,
225 + usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
226 +}
227 +
228 +static void sg_clean (struct usb_sg_request *io)
229 +{
230 + struct usb_hcd *hcd = io->dev->bus->hcpriv;
231 + struct pci_dev *pdev = hcd->pdev;
232 +
233 + if (io->urbs) {
234 + while (io->entries--)
235 + usb_free_urb (io->urbs [io->entries]);
236 + kfree (io->urbs);
237 + io->urbs = 0;
238 + }
239 + if (pdev->dma_mask != 0)
240 + usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
241 + io->dev = 0;
242 +}
243 +
244 +static void sg_complete (struct urb *urb)
245 +{
246 + struct usb_sg_request *io = (struct usb_sg_request *) urb->context;
247 +
248 + spin_lock (&io->lock);
249 +
250 + /* In 2.5 we require hcds' endpoint queues not to progress after fault
251 + * reports, until the completion callback (this!) returns. That lets
252 + * device driver code (like this routine) unlink queued urbs first,
253 + * if it needs to, since the HC won't work on them at all. So it's
254 + * not possible for page N+1 to overwrite page N, and so on.
255 + *
256 + * That's only for "hard" faults; "soft" faults (unlinks) sometimes
257 + * complete before the HCD can get requests away from hardware,
258 + * though never during cleanup after a hard fault.
259 + */
260 + if (io->status
261 + && (io->status != -ECONNRESET
262 + || urb->status != -ECONNRESET)
263 + && urb->actual_length) {
264 + US_DEBUGP("Error: %s ep%d%s scatterlist error %d/%d\n",
265 + io->dev->devpath,
266 + usb_pipeendpoint (urb->pipe),
267 + usb_pipein (urb->pipe) ? "in" : "out",
268 + urb->status, io->status);
269 + // BUG ();
270 + }
271 +
272 + if (urb->status && urb->status != -ECONNRESET) {
273 + int i, found, status;
274 +
275 + io->status = urb->status;
276 +
277 + /* the previous urbs, and this one, completed already.
278 + * unlink pending urbs so they won't rx/tx bad data.
279 + */
280 + for (i = 0, found = 0; i < io->entries; i++) {
281 + if (!io->urbs [i])
282 + continue;
283 + if (found) {
284 + status = usb_unlink_urb (io->urbs [i]);
285 + if (status != -EINPROGRESS && status != -EBUSY)
286 + US_DEBUGP("Error: %s, unlink --> %d\n", __FUNCTION__, status);
287 + } else if (urb == io->urbs [i])
288 + found = 1;
289 + }
290 + }
291 + urb->dev = 0;
292 +
293 + /* on the last completion, signal usb_sg_wait() */
294 + io->bytes += urb->actual_length;
295 + io->count--;
296 + if (!io->count)
297 + complete (&io->complete);
298 +
299 + spin_unlock (&io->lock);
300 +}
301 +
302 +/**
303 + * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request
304 + * @io: request block being initialized. until usb_sg_wait() returns,
305 + * treat this as a pointer to an opaque block of memory,
306 + * @dev: the usb device that will send or receive the data
307 + * @pipe: endpoint "pipe" used to transfer the data
308 + * @period: polling rate for interrupt endpoints, in frames or
309 + * (for high speed endpoints) microframes; ignored for bulk
310 + * @sg: scatterlist entries
311 + * @nents: how many entries in the scatterlist
312 + * @length: how many bytes to send from the scatterlist, or zero to
313 + * send every byte identified in the list.
314 + * @mem_flags: SLAB_* flags affecting memory allocations in this call
315 + *
316 + * Returns zero for success, else a negative errno value. This initializes a
317 + * scatter/gather request, allocating resources such as I/O mappings and urb
318 + * memory (except maybe memory used by USB controller drivers).
319 + *
320 + * The request must be issued using usb_sg_wait(), which waits for the I/O to
321 + * complete (or to be canceled) and then cleans up all resources allocated by
322 + * usb_sg_init().
323 + *
324 + * The request may be canceled with usb_sg_cancel(), either before or after
325 + * usb_sg_wait() is called.
326 + */
327 +int usb_sg_init (
328 + struct usb_sg_request *io,
329 + struct usb_device *dev,
330 + unsigned pipe,
331 + unsigned period,
332 + struct scatterlist *sg,
333 + int nents,
334 + size_t length,
335 + int mem_flags
336 +)
337 +{
338 + int i;
339 + int urb_flags;
340 + int dma;
341 + struct usb_hcd *hcd;
342 +
343 + hcd = dev->bus->hcpriv;
344 +
345 + if (!io || !dev || !sg
346 + || usb_pipecontrol (pipe)
347 + || usb_pipeisoc (pipe)
348 + || nents <= 0)
349 + return -EINVAL;
350 +
351 + spin_lock_init (&io->lock);
352 + io->dev = dev;
353 + io->pipe = pipe;
354 + io->sg = sg;
355 + io->nents = nents;
356 +
357 + /* not all host controllers use DMA (like the mainstream pci ones);
358 + * they can use PIO (sl811) or be software over another transport.
359 + */
360 + dma = (hcd->pdev->dma_mask != 0);
361 + if (dma)
362 + io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
363 + else
364 + io->entries = nents;
365 +
366 + /* initialize all the urbs we'll use */
367 + if (io->entries <= 0)
368 + return io->entries;
369 +
370 + io->count = 0;
371 + io->urbs = kmalloc (io->entries * sizeof *io->urbs, mem_flags);
372 + if (!io->urbs)
373 + goto nomem;
374 +
375 + urb_flags = USB_ASYNC_UNLINK | URB_NO_INTERRUPT | URB_NO_TRANSFER_DMA_MAP;
376 + if (usb_pipein (pipe))
377 + urb_flags |= URB_SHORT_NOT_OK;
378 +
379 + for (i = 0; i < io->entries; i++, io->count = i) {
380 + unsigned len;
381 +
382 + io->urbs [i] = usb_alloc_urb (0);
383 + if (!io->urbs [i]) {
384 + io->entries = i;
385 + goto nomem;
386 + }
387 +
388 + io->urbs [i]->dev = 0;
389 + io->urbs [i]->pipe = pipe;
390 + io->urbs [i]->interval = period;
391 + io->urbs [i]->transfer_flags = urb_flags;
392 +
393 + io->urbs [i]->complete = sg_complete;
394 + io->urbs [i]->context = io;
395 + io->urbs [i]->status = -EINPROGRESS;
396 + io->urbs [i]->actual_length = 0;
397 +
398 + if (dma) {
399 + /* hc may use _only_ transfer_dma */
400 + io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
401 + len = sg_dma_len (sg + i);
402 + } else {
403 + /* hc may use _only_ transfer_buffer */
404 + io->urbs [i]->transfer_buffer =
405 + page_address (sg [i].page) + sg [i].offset;
406 + len = sg [i].length;
407 + }
408 +
409 + if (length) {
410 + len = min_t (unsigned, len, length);
411 + length -= len;
412 + if (length == 0)
413 + io->entries = i + 1;
414 + }
415 + io->urbs [i]->transfer_buffer_length = len;
416 + }
417 + io->urbs [--i]->transfer_flags &= ~URB_NO_INTERRUPT;
418 +
419 + /* transaction state */
420 + io->status = 0;
421 + io->bytes = 0;
422 + init_completion (&io->complete);
423 + return 0;
424 +
425 +nomem:
426 + sg_clean (io);
427 + return -ENOMEM;
428 +}
429 +
430 +/**
431 + * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait()
432 + * @io: request block, initialized with usb_sg_init()
433 + *
434 + * This stops a request after it has been started by usb_sg_wait().
435 + * It can also prevents one initialized by usb_sg_init() from starting,
436 + * so that call just frees resources allocated to the request.
437 + */
438 +void usb_sg_cancel (struct usb_sg_request *io)
439 +{
440 + unsigned long flags;
441 +
442 + spin_lock_irqsave (&io->lock, flags);
443 +
444 + /* shut everything down, if it didn't already */
445 + if (!io->status) {
446 + int i;
447 +
448 + io->status = -ECONNRESET;
449 + for (i = 0; i < io->entries; i++) {
450 + int retval;
451 +
452 + if (!io->urbs [i]->dev)
453 + continue;
454 + retval = usb_unlink_urb (io->urbs [i]);
455 + if (retval != -EINPROGRESS && retval != -EBUSY)
456 + US_DEBUGP("WARNING: %s, unlink --> %d\n", __FUNCTION__, retval);
457 + }
458 + }
459 + spin_unlock_irqrestore (&io->lock, flags);
460 +}
461 +
462 +/**
463 + * usb_sg_wait - synchronously execute scatter/gather request
464 + * @io: request block handle, as initialized with usb_sg_init().
465 + * some fields become accessible when this call returns.
466 + * Context: !in_interrupt ()
467 + *
468 + * This function blocks until the specified I/O operation completes. It
469 + * leverages the grouping of the related I/O requests to get good transfer
470 + * rates, by queueing the requests. At higher speeds, such queuing can
471 + * significantly improve USB throughput.
472 + *
473 + * There are three kinds of completion for this function.
474 + * (1) success, where io->status is zero. The number of io->bytes
475 + * transferred is as requested.
476 + * (2) error, where io->status is a negative errno value. The number
477 + * of io->bytes transferred before the error is usually less
478 + * than requested, and can be nonzero.
479 + * (3) cancelation, a type of error with status -ECONNRESET that
480 + * is initiated by usb_sg_cancel().
481 + *
482 + * When this function returns, all memory allocated through usb_sg_init() or
483 + * this call will have been freed. The request block parameter may still be
484 + * passed to usb_sg_cancel(), or it may be freed. It could also be
485 + * reinitialized and then reused.
486 + *
487 + * Data Transfer Rates:
488 + *
489 + * Bulk transfers are valid for full or high speed endpoints.
490 + * The best full speed data rate is 19 packets of 64 bytes each
491 + * per frame, or 1216 bytes per millisecond.
492 + * The best high speed data rate is 13 packets of 512 bytes each
493 + * per microframe, or 52 KBytes per millisecond.
494 + *
495 + * The reason to use interrupt transfers through this API would most likely
496 + * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond
497 + * could be transferred. That capability is less useful for low or full
498 + * speed interrupt endpoints, which allow at most one packet per millisecond,
499 + * of at most 8 or 64 bytes (respectively).
500 + */
501 +void usb_sg_wait (struct usb_sg_request *io)
502 +{
503 + int i, entries = io->entries;
504 +
505 + /* queue the urbs. */
506 + spin_lock_irq (&io->lock);
507 + for (i = 0; i < entries && !io->status; i++) {
508 + int retval;
509 +
510 + io->urbs [i]->dev = io->dev;
511 + retval = usb_submit_urb (io->urbs [i]);
512 +
513 + /* after we submit, let completions or cancelations fire;
514 + * we handshake using io->status.
515 + */
516 + spin_unlock_irq (&io->lock);
517 + switch (retval) {
518 + /* maybe we retrying will recover */
519 + case -ENXIO: // hc didn't queue this one
520 + case -EAGAIN:
521 + case -ENOMEM:
522 + io->urbs [i]->dev = 0;
523 + retval = 0;
524 + i--;
525 + yield ();
526 + break;
527 +
528 + /* no error? continue immediately.
529 + *
530 + * NOTE: to work better with UHCI (4K I/O buffer may
531 + * need 3K of TDs) it may be good to limit how many
532 + * URBs are queued at once; N milliseconds?
533 + */
534 + case 0:
535 + cpu_relax ();
536 + break;
537 +
538 + /* fail any uncompleted urbs */
539 + default:
540 + spin_lock_irq (&io->lock);
541 + io->count -= entries - i;
542 + if (io->status == -EINPROGRESS)
543 + io->status = retval;
544 + if (io->count == 0)
545 + complete (&io->complete);
546 + spin_unlock_irq (&io->lock);
547 +
548 + io->urbs [i]->dev = 0;
549 + io->urbs [i]->status = retval;
550 +
551 + US_DEBUGP("%s, submit --> %d\n", __FUNCTION__, retval);
552 + usb_sg_cancel (io);
553 + }
554 + spin_lock_irq (&io->lock);
555 + if (retval && io->status == -ECONNRESET)
556 + io->status = retval;
557 + }
558 + spin_unlock_irq (&io->lock);
559 +
560 + /* OK, yes, this could be packaged as non-blocking.
561 + * So could the submit loop above ... but it's easier to
562 + * solve neither problem than to solve both!
563 + */
564 + wait_for_completion (&io->complete);
565 +
566 + sg_clean (io);
567 +}
568 +
569 +/*
570 + * Interpret the results of a URB transfer
571 + *
572 + * This function prints appropriate debugging messages, clears halts on
573 + * non-control endpoints, and translates the status to the corresponding
574 + * USB_STOR_XFER_xxx return code.
575 + */
576 +static int interpret_urb_result(struct us_data *us, unsigned int pipe,
577 + unsigned int length, int result, unsigned int partial)
578 +{
579 + US_DEBUGP("Status code %d; transferred %u/%u\n",
580 + result, partial, length);
581 + switch (result) {
582 +
583 + /* no error code; did we send all the data? */
584 + case 0:
585 + if (partial != length) {
586 + US_DEBUGP("-- short transfer\n");
587 + return USB_STOR_XFER_SHORT;
588 + }
589 +
590 + US_DEBUGP("-- transfer complete\n");
591 + return USB_STOR_XFER_GOOD;
592 +
593 + /* stalled */
594 + case -EPIPE:
595 + /* for control endpoints, (used by CB[I]) a stall indicates
596 + * a failed command */
597 + if (usb_pipecontrol(pipe)) {
598 + US_DEBUGP("-- stall on control pipe\n");
599 + return USB_STOR_XFER_STALLED;
600 + }
601 +
602 + /* for other sorts of endpoint, clear the stall */
603 + US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
604 + if (usb_stor_clear_halt(us, pipe) < 0)
605 + return USB_STOR_XFER_ERROR;
606 + return USB_STOR_XFER_STALLED;
607 +
608 + /* timeout or excessively long NAK */
609 + case -ETIMEDOUT:
610 + US_DEBUGP("-- timeout or NAK\n");
611 + return USB_STOR_XFER_ERROR;
612 +
613 + /* babble - the device tried to send more than we wanted to read */
614 + case -EOVERFLOW:
615 + US_DEBUGP("-- babble\n");
616 + return USB_STOR_XFER_LONG;
617 +
618 + /* the transfer was cancelled by abort, disconnect, or timeout */
619 + case -ECONNRESET:
620 + US_DEBUGP("-- transfer cancelled\n");
621 + return USB_STOR_XFER_ERROR;
622 +
623 + /* short scatter-gather read transfer */
624 + case -EREMOTEIO:
625 + US_DEBUGP("-- short read transfer\n");
626 + return USB_STOR_XFER_SHORT;
627 +
628 + /* abort or disconnect in progress */
629 + case -EIO:
630 + US_DEBUGP("-- abort or disconnect in progress\n");
631 + return USB_STOR_XFER_ERROR;
632 +
633 + /* the catch-all error case */
634 + default:
635 + US_DEBUGP("-- unknown error\n");
636 + return USB_STOR_XFER_ERROR;
637 + }
638 +}
639 +
640 +/*
641 + * Transfer a scatter-gather list via bulk transfer
642 + *
643 + * This function does basically the same thing as usb_stor_bulk_msg()
644 + * above, but it uses the usbcore scatter-gather library.
645 + */
646 +int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
647 + struct scatterlist *sg, int num_sg, unsigned int length,
648 + unsigned int *act_len)
649 +{
650 + int result;
651 +
652 + /* don't submit s-g requests during abort/disconnect processing */
653 + if (us->flags & ABORTING_OR_DISCONNECTING)
654 + return USB_STOR_XFER_ERROR;
655 +
656 + /* initialize the scatter-gather request block */
657 + US_DEBUGP("%s: xfer %u bytes, %d entries\n", __FUNCTION__,
658 + length, num_sg);
659 + result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
660 + sg, num_sg, length, SLAB_NOIO);
661 + if (result) {
662 + US_DEBUGP("usb_sg_init returned %d\n", result);
663 + return USB_STOR_XFER_ERROR;
664 + }
665 +
666 + /* since the block has been initialized successfully, it's now
667 + * okay to cancel it */
668 + set_bit(US_FLIDX_SG_ACTIVE, &us->flags);
669 +
670 + /* did an abort/disconnect occur during the submission? */
671 + if (us->flags & ABORTING_OR_DISCONNECTING) {
672 +
673 + /* cancel the request, if it hasn't been cancelled already */
674 + if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) {
675 + US_DEBUGP("-- cancelling sg request\n");
676 + usb_sg_cancel(&us->current_sg);
677 + }
678 + }
679 +
680 + /* wait for the completion of the transfer */
681 + usb_sg_wait(&us->current_sg);
682 + clear_bit(US_FLIDX_SG_ACTIVE, &us->flags);
683 +
684 + result = us->current_sg.status;
685 + if (act_len)
686 + *act_len = us->current_sg.bytes;
687 + return interpret_urb_result(us, pipe, length, result,
688 + us->current_sg.bytes);
689 +}
690 +
691 /*
692 * Transfer an entire SCSI command's worth of data payload over the bulk
693 * pipe.
694 @@ -569,6 +1122,8 @@ void usb_stor_transfer(Scsi_Cmnd *srb, s
695 struct scatterlist *sg;
696 unsigned int total_transferred = 0;
697 unsigned int transfer_amount;
698 + unsigned int partial;
699 + unsigned int pipe;
700
701 /* calculate how much we want to transfer */
702 transfer_amount = usb_stor_transfer_length(srb);
703 @@ -585,23 +1140,34 @@ void usb_stor_transfer(Scsi_Cmnd *srb, s
704 * make the appropriate requests for each, until done
705 */
706 sg = (struct scatterlist *) srb->request_buffer;
707 - for (i = 0; i < srb->use_sg; i++) {
708 -
709 - /* transfer the lesser of the next buffer or the
710 - * remaining data */
711 - if (transfer_amount - total_transferred >=
712 - sg[i].length) {
713 - result = usb_stor_transfer_partial(us,
714 - sg[i].address, sg[i].length);
715 - total_transferred += sg[i].length;
716 - } else
717 - result = usb_stor_transfer_partial(us,
718 - sg[i].address,
719 - transfer_amount - total_transferred);
720 -
721 - /* if we get an error, end the loop here */
722 - if (result)
723 - break;
724 + if (us->pusb_dev->speed == USB_SPEED_HIGH) {
725 + /* calculate the appropriate pipe information */
726 + if (us->srb->sc_data_direction == SCSI_DATA_READ)
727 + pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
728 + else
729 + pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
730 + /* use the usb core scatter-gather primitives */
731 + result = usb_stor_bulk_transfer_sglist(us, pipe,
732 + sg, srb->use_sg, transfer_amount, &partial);
733 + } else {
734 + for (i = 0; i < srb->use_sg; i++) {
735 +
736 + /* transfer the lesser of the next buffer or the
737 + * remaining data */
738 + if (transfer_amount - total_transferred >=
739 + sg[i].length) {
740 + result = usb_stor_transfer_partial(us,
741 + sg[i].address, sg[i].length);
742 + total_transferred += sg[i].length;
743 + } else
744 + result = usb_stor_transfer_partial(us,
745 + sg[i].address,
746 + transfer_amount - total_transferred);
747 +
748 + /* if we get an error, end the loop here */
749 + if (result)
750 + break;
751 + }
752 }
753 }
754 else
755 Index: linux-2.4.35.4/drivers/usb/storage/transport.h
756 ===================================================================
757 --- linux-2.4.35.4.orig/drivers/usb/storage/transport.h
758 +++ linux-2.4.35.4/drivers/usb/storage/transport.h
759 @@ -127,6 +127,16 @@ struct bulk_cs_wrap {
760 #define US_BULK_TRANSFER_ABORTED 3 /* transfer canceled */
761
762 /*
763 + * usb_stor_bulk_transfer_xxx() return codes, in order of severity
764 + */
765 +
766 +#define USB_STOR_XFER_GOOD 0 /* good transfer */
767 +#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */
768 +#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
769 +#define USB_STOR_XFER_LONG 3 /* device tried to send too much */
770 +#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */
771 +
772 +/*
773 * Transport return codes
774 */
775
776 Index: linux-2.4.35.4/drivers/usb/storage/usb.h
777 ===================================================================
778 --- linux-2.4.35.4.orig/drivers/usb/storage/usb.h
779 +++ linux-2.4.35.4/drivers/usb/storage/usb.h
780 @@ -111,6 +111,60 @@ typedef int (*trans_reset)(struct us_dat
781 typedef void (*proto_cmnd)(Scsi_Cmnd*, struct us_data*);
782 typedef void (*extra_data_destructor)(void *); /* extra data destructor */
783
784 +/* Dynamic flag definitions: used in set_bit() etc. */
785 +#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */
786 +#define US_FLIDX_SG_ACTIVE 19 /* 0x00080000 current_sg is in use */
787 +#define US_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */
788 +#define US_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */
789 +#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \
790 + (1UL << US_FLIDX_DISCONNECTING))
791 +#define US_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */
792 +
793 +/* processing state machine states */
794 +#define US_STATE_IDLE 1
795 +#define US_STATE_RUNNING 2
796 +#define US_STATE_RESETTING 3
797 +#define US_STATE_ABORTING 4
798 +
799 +/**
800 + * struct usb_sg_request - support for scatter/gather I/O
801 + * @status: zero indicates success, else negative errno
802 + * @bytes: counts bytes transferred.
803 + *
804 + * These requests are initialized using usb_sg_init(), and then are used
805 + * as request handles passed to usb_sg_wait() or usb_sg_cancel(). Most
806 + * members of the request object aren't for driver access.
807 + *
808 + * The status and bytecount values are valid only after usb_sg_wait()
809 + * returns. If the status is zero, then the bytecount matches the total
810 + * from the request.
811 + *
812 + * After an error completion, drivers may need to clear a halt condition
813 + * on the endpoint.
814 + */
815 +struct usb_sg_request {
816 + int status;
817 + size_t bytes;
818 +
819 + /*
820 + * members below are private to usbcore,
821 + * and are not provided for driver access!
822 + */
823 + spinlock_t lock;
824 +
825 + struct usb_device *dev;
826 + int pipe;
827 + struct scatterlist *sg;
828 + int nents;
829 +
830 + int entries;
831 + struct urb **urbs;
832 +
833 + int count;
834 + struct completion complete;
835 +};
836 +
837 +
838 /* we allocate one of these for every device that we remember */
839 struct us_data {
840 struct us_data *next; /* next device */
841 @@ -171,6 +225,7 @@ struct us_data {
842 struct urb *current_urb; /* non-int USB requests */
843 struct completion current_done; /* the done flag */
844 unsigned int tag; /* tag for bulk CBW/CSW */
845 + struct usb_sg_request current_sg; /* scatter-gather req. */
846
847 /* the semaphore for sleeping the control thread */
848 struct semaphore sema; /* to sleep thread on */
849 Index: linux-2.4.35.4/include/linux/usb.h
850 ===================================================================
851 --- linux-2.4.35.4.orig/include/linux/usb.h
852 +++ linux-2.4.35.4/include/linux/usb.h
853 @@ -483,6 +483,8 @@ struct usb_driver {
854 #define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */
855 /* ... less overhead for QUEUE_BULK */
856 #define USB_TIMEOUT_KILLED 0x1000 // only set by HCD!
857 +#define URB_NO_TRANSFER_DMA_MAP 0x0400 /* urb->transfer_dma valid on submit */
858 +#define URB_NO_SETUP_DMA_MAP 0x0800 /* urb->setup_dma valid on submit */
859
860 struct iso_packet_descriptor
861 {
Personal OpenWRT clone
This page took 0.08789 seconds and 5 git commands to generate.