projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
add layer7 to iptables/kernel
[openwrt.git] / openwrt / package / linux / kernel-source / include / sbchipc.h
1 /*
2 * SiliconBackplane Chipcommon core hardware definitions.
3 *
4 * The chipcommon core provides chip identification, SB control,
5 * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
6 * gpio interface, extbus, and support for serial and parallel flashes.
7 *
8 * $Id$
9 * Copyright 2004, Broadcom Corporation
10 * All Rights Reserved.
11 *
12 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
13 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
14 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
15 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
16 *
17 */
18
19 #ifndef _SBCHIPC_H
20 #define _SBCHIPC_H
21
22
23 #ifndef _LANGUAGE_ASSEMBLY
24
25 /* cpp contortions to concatenate w/arg prescan */
26 #ifndef PAD
27 #define _PADLINE(line) pad ## line
28 #define _XSTR(line) _PADLINE(line)
29 #define PAD _XSTR(__LINE__)
30 #endif /* PAD */
31
32 typedef volatile struct {
33 uint32 chipid; /* 0x0 */
34 uint32 capabilities;
35 uint32 corecontrol; /* corerev >= 1 */
36 uint32 bist;
37
38 /* OTP */
39 uint32 otpstatus; /* 0x10, corerev >= 10 */
40 uint32 otpcontrol;
41 uint32 otpprog;
42 uint32 PAD;
43
44 /* Interrupt control */
45 uint32 intstatus; /* 0x20 */
46 uint32 intmask;
47 uint32 PAD[2];
48
49 /* Jtag Master */
50 uint32 jtagcmd; /* 0x30, rev >= 10 */
51 uint32 jtagir;
52 uint32 jtagdr;
53 uint32 jtagctrl;
54
55 /* serial flash interface registers */
56 uint32 flashcontrol; /* 0x40 */
57 uint32 flashaddress;
58 uint32 flashdata;
59 uint32 PAD[1];
60
61 /* Silicon backplane configuration broadcast control */
62 uint32 broadcastaddress; /* 0x50 */
63 uint32 broadcastdata;
64 uint32 PAD[2];
65
66 /* gpio - cleared only by power-on-reset */
67 uint32 gpioin; /* 0x60 */
68 uint32 gpioout;
69 uint32 gpioouten;
70 uint32 gpiocontrol;
71 uint32 gpiointpolarity;
72 uint32 gpiointmask;
73 uint32 PAD[2];
74
75 /* Watchdog timer */
76 uint32 watchdog; /* 0x80 */
77 uint32 PAD[3];
78
79 /* clock control */
80 uint32 clockcontrol_n; /* 0x90 */
81 uint32 clockcontrol_sb; /* aka m0 */
82 uint32 clockcontrol_pci; /* aka m1 */
83 uint32 clockcontrol_m2; /* mii/uart/mipsref */
84 uint32 clockcontrol_mips; /* aka m3 */
85 uint32 clkdiv; /* corerev >= 3 */
86 uint32 PAD[2];
87
88 /* pll delay registers (corerev >= 4) */
89 uint32 pll_on_delay; /* 0xb0 */
90 uint32 fref_sel_delay;
91 uint32 slow_clk_ctl; /* 5 < corerev < 10 */
92 uint32 PAD[1];
93
94 /* Instaclock registers (corerev >= 10) */
95 uint32 system_clk_ctl; /* 0xc0 */
96 uint32 clkstatestretch;
97 uint32 PAD[14];
98
99 /* ExtBus control registers (corerev >= 3) */
100 uint32 pcmcia_config; /* 0x100 */
101 uint32 pcmcia_memwait;
102 uint32 pcmcia_attrwait;
103 uint32 pcmcia_iowait;
104 uint32 ide_config;
105 uint32 ide_memwait;
106 uint32 ide_attrwait;
107 uint32 ide_iowait;
108 uint32 prog_config;
109 uint32 prog_waitcount;
110 uint32 flash_config;
111 uint32 flash_waitcount;
112 uint32 PAD[116];
113
114 /* uarts */
115 uint8 uart0data; /* 0x300 */
116 uint8 uart0imr;
117 uint8 uart0fcr;
118 uint8 uart0lcr;
119 uint8 uart0mcr;
120 uint8 uart0lsr;
121 uint8 uart0msr;
122 uint8 uart0scratch;
123 uint8 PAD[248]; /* corerev >= 1 */
124
125 uint8 uart1data; /* 0x400 */
126 uint8 uart1imr;
127 uint8 uart1fcr;
128 uint8 uart1lcr;
129 uint8 uart1mcr;
130 uint8 uart1lsr;
131 uint8 uart1msr;
132 uint8 uart1scratch;
133 } chipcregs_t;
134
135 #endif /* _LANGUAGE_ASSEMBLY */
136
137 #define CC_CHIPID 0
138 #define CC_CAPABILITIES 4
139 #define CC_JTAGCMD 0x30
140 #define CC_JTAGIR 0x34
141 #define CC_JTAGDR 0x38
142 #define CC_JTAGCTRL 0x3c
143 #define CC_CLKDIV 0xa4
144
145 /* chipid */
146 #define CID_ID_MASK 0x0000ffff /* Chip Id mask */
147 #define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
148 #define CID_REV_SHIFT 16 /* Chip Revision shift */
149 #define CID_PKG_MASK 0x00f00000 /* Package Option mask */
150 #define CID_PKG_SHIFT 20 /* Package Option shift */
151 #define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
152 #define CID_CC_SHIFT 24
153
154 /* capabilities */
155 #define CAP_UARTS_MASK 0x00000003 /* Number of uarts */
156 #define CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
157 #define CAP_UCLKSEL 0x00000018 /* UARTs clock select */
158 #define CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */
159 #define CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */
160 #define CAP_EXTBUS 0x00000040 /* External bus present */
161 #define CAP_FLASH_MASK 0x00000700 /* Type of flash */
162 #define CAP_PLL_MASK 0x00038000 /* Type of PLL */
163 #define CAP_PWR_CTL 0x00040000 /* Power control */
164 #define CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
165 #define CAP_JTAGP 0x00400000 /* JTAG Master Present */
166 #define CAP_ROM 0x00800000 /* Internal boot rom active */
167
168 /* PLL type */
169 #define PLL_NONE 0x00000000
170 #define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */
171 #define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */
172 #define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */
173 #define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */
174
175 /* corecontrol */
176 #define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */
177 #define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
178
179 /* jtagcmd */
180 #define JCMD_START 0x80000000
181 #define JCMD_BUSY 0x80000000
182 #define JCMD_PAUSE 0x40000000
183 #define JCMD0_ACC_MASK 0x0000f000
184 #define JCMD0_ACC_IRDR 0x00000000
185 #define JCMD0_ACC_DR 0x00001000
186 #define JCMD0_ACC_IR 0x00002000
187 #define JCMD0_ACC_RESET 0x00003000
188 #define JCMD0_ACC_IRPDR 0x00004000
189 #define JCMD0_ACC_PDR 0x00005000
190 #define JCMD0_IRW_MASK 0x00000f00
191 #define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */
192 #define JCMD_ACC_IRDR 0x00000000
193 #define JCMD_ACC_DR 0x00010000
194 #define JCMD_ACC_IR 0x00020000
195 #define JCMD_ACC_RESET 0x00030000
196 #define JCMD_ACC_IRPDR 0x00040000
197 #define JCMD_ACC_PDR 0x00050000
198 #define JCMD_IRW_MASK 0x00001f00
199 #define JCMD_IRW_SHIFT 8
200 #define JCMD_DRW_MASK 0x0000003f
201
202 /* jtagctrl */
203 #define JCTRL_FORCE_CLK 4 /* Force clock */
204 #define JCTRL_EXT_EN 2 /* Enable external targets */
205 #define JCTRL_EN 1 /* Enable Jtag master */
206
207 /* Fields in clkdiv */
208 #define CLKD_SFLASH 0x0f000000
209 #define CLKD_SFLASH_SHIFT 24
210 #define CLKD_OTP 0x000f0000
211 #define CLKD_OTP_SHIFT 16
212 #define CLKD_JTAG 0x00000f00
213 #define CLKD_JTAG_SHIFT 8
214 #define CLKD_UART 0x000000ff
215
216 /* intstatus/intmask */
217 #define CI_GPIO 0x00000001 /* gpio intr */
218 #define CI_EI 0x00000002 /* ro: ext intr pin (corerev >= 3) */
219 #define CI_WDREST 0x80000000 /* watchdog reset occurred */
220
221 /* slow_clk_ctl */
222 #define SCC_SS_MASK 0x00000007 /* slow clock source mask */
223 #define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */
224 #define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */
225 #define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */
226 #define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
227 #define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
228 #define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
229 #define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
230 #define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
231 #define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
232 #define SCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */
233 #define SCC_CD_SHF 16 /* CLockDivider shift */
234
235 /* sys_clk_ctl */
236 #define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */
237 #define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */
238 #define SYCC_FP 0x00000004 /* ForcePLLOn */
239 #define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */
240 #define SYCC_HR 0x00000010 /* Force HT */
241 #define SYCC_CD_MASK 0xffff0000 /* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */
242 #define SYCC_CD_SHF 16 /* CLockDivider shift */
243
244 /* clockcontrol_n */
245 #define CN_N1_MASK 0x3f /* n1 control */
246 #define CN_N2_MASK 0x3f00 /* n2 control */
247 #define CN_N2_SHIFT 8
248
249 /* clockcontrol_sb/pci/uart */
250 #define CC_M1_MASK 0x3f /* m1 control */
251 #define CC_M2_MASK 0x3f00 /* m2 control */
252 #define CC_M2_SHIFT 8
253 #define CC_M3_MASK 0x3f0000 /* m3 control */
254 #define CC_M3_SHIFT 16
255 #define CC_MC_MASK 0x1f000000 /* mux control */
256 #define CC_MC_SHIFT 24
257
258 /* N3M Clock control values for 125Mhz */
259 #define CC_125_N 0x0802 /* Default values for bcm4310 */
260 #define CC_125_M 0x04020009
261 #define CC_125_M25 0x11090009
262 #define CC_125_M33 0x11090005
263
264 /* N3M Clock control magic field values */
265 #define CC_F6_2 0x02 /* A factor of 2 in */
266 #define CC_F6_3 0x03 /* 6-bit fields like */
267 #define CC_F6_4 0x05 /* N1, M1 or M3 */
268 #define CC_F6_5 0x09
269 #define CC_F6_6 0x11
270 #define CC_F6_7 0x21
271
272 #define CC_F5_BIAS 5 /* 5-bit fields get this added */
273
274 #define CC_MC_BYPASS 0x08
275 #define CC_MC_M1 0x04
276 #define CC_MC_M1M2 0x02
277 #define CC_MC_M1M2M3 0x01
278 #define CC_MC_M1M3 0x11
279
280 /* Type 2 Clock control magic field values */
281 #define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
282 #define CC_T2M2_BIAS 3 /* m2 bias */
283
284 #define CC_T2MC_M1BYP 1
285 #define CC_T2MC_M2BYP 2
286 #define CC_T2MC_M3BYP 4
287
288 /* Common clock base */
289 #define CC_CLOCK_BASE 24000000 /* Half the clock freq */
290
291
292 /* Flash types in the chipcommon capabilities register */
293 #define FLASH_NONE 0x000 /* No flash */
294 #define SFLASH_ST 0x100 /* ST serial flash */
295 #define SFLASH_AT 0x200 /* Atmel serial flash */
296 #define PFLASH 0x700 /* Parallel flash */
297
298 /* Prefered flash window in chipcommon */
299 #define CC_FLASH_BASE 0xbc000000 /* Chips with chipcommon cores */
300 #define CC_FLASH_MAX 0x02000000 /* Maximum flash size with chipc */
301
302
303 /* Bits in the config registers */
304 #define CC_CFG_EN 0x0001 /* Enable */
305 #define CC_CFG_EM_MASK 0x000e /* Extif Mode */
306 #define CC_CFG_EM_ASYNC 0x0002 /* Async/Parallel flash */
307 #define CC_CFG_EM_SYNC 0x0004 /* Synchronous */
308 #define CC_CFG_EM_PCMCIA 0x0008 /* PCMCIA */
309 #define CC_CFG_EM_IDE 0x000a /* IDE */
310 #define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
311 #define CC_CFG_CD_MASK 0x0060 /* Sync: Clock divisor */
312 #define CC_CFG_CE 0x0080 /* Sync: Clock enable */
313 #define CC_CFG_SB 0x0100 /* Sync: Size/Bytestrobe */
314
315 /* Start/busy bit in flashcontrol */
316 #define SFLASH_START 0x80000000
317 #define SFLASH_BUSY SFLASH_START
318
319 /* flashcontrol opcodes for ST flashes */
320 #define SFLASH_ST_WREN 0x0006 /* Write Enable */
321 #define SFLASH_ST_WRDIS 0x0004 /* Write Disable */
322 #define SFLASH_ST_RDSR 0x0105 /* Read Status Register */
323 #define SFLASH_ST_WRSR 0x0101 /* Write Status Register */
324 #define SFLASH_ST_READ 0x0303 /* Read Data Bytes */
325 #define SFLASH_ST_PP 0x0302 /* Page Program */
326 #define SFLASH_ST_SE 0x02d8 /* Sector Erase */
327 #define SFLASH_ST_BE 0x00c7 /* Bulk Erase */
328 #define SFLASH_ST_DP 0x00b9 /* Deep Power-down */
329 #define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */
330
331 /* Status register bits for ST flashes */
332 #define SFLASH_ST_WIP 0x01 /* Write In Progress */
333 #define SFLASH_ST_WEL 0x02 /* Write Enable Latch */
334 #define SFLASH_ST_BP_MASK 0x1c /* Block Protect */
335 #define SFLASH_ST_BP_SHIFT 2
336 #define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */
337
338 /* flashcontrol opcodes for Atmel flashes */
339 #define SFLASH_AT_READ 0x07e8
340 #define SFLASH_AT_PAGE_READ 0x07d2
341 #define SFLASH_AT_BUF1_READ
342 #define SFLASH_AT_BUF2_READ
343 #define SFLASH_AT_STATUS 0x01d7
344 #define SFLASH_AT_BUF1_WRITE 0x0384
345 #define SFLASH_AT_BUF2_WRITE 0x0387
346 #define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283
347 #define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286
348 #define SFLASH_AT_BUF1_PROGRAM 0x0288
349 #define SFLASH_AT_BUF2_PROGRAM 0x0289
350 #define SFLASH_AT_PAGE_ERASE 0x0281
351 #define SFLASH_AT_BLOCK_ERASE 0x0250
352 #define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
353 #define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
354 #define SFLASH_AT_BUF1_LOAD 0x0253
355 #define SFLASH_AT_BUF2_LOAD 0x0255
356 #define SFLASH_AT_BUF1_COMPARE 0x0260
357 #define SFLASH_AT_BUF2_COMPARE 0x0261
358 #define SFLASH_AT_BUF1_REPROGRAM 0x0258
359 #define SFLASH_AT_BUF2_REPROGRAM 0x0259
360
361 /* Status register bits for Atmel flashes */
362 #define SFLASH_AT_READY 0x80
363 #define SFLASH_AT_MISMATCH 0x40
364 #define SFLASH_AT_ID_MASK 0x38
365 #define SFLASH_AT_ID_SHIFT 3
366
367 #endif /* _SBCHIPC_H */
Personal OpenWRT clone
This page took 0.096061 seconds and 5 git commands to generate.