target/linux/adm5120/files-2.6.26/arch/mips/adm5120/common/platform.c

   1 /*
   2  *  ADM5120 generic platform devices
   3  *
   4  *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  *
  10  */
  11
  12 #include <linux/init.h>
  13 #include <linux/kernel.h>
  14 #include <linux/list.h>
  15 #include <linux/device.h>
  16 #include <linux/dma-mapping.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/gpio.h>
  19
  20 #include <asm/bootinfo.h>
  21
  22 #include <asm/mach-adm5120/adm5120_defs.h>
  23 #include <asm/mach-adm5120/adm5120_info.h>
  24 #include <asm/mach-adm5120/adm5120_irq.h>
  25 #include <asm/mach-adm5120/adm5120_switch.h>
  26 #include <asm/mach-adm5120/adm5120_nand.h>
  27 #include <asm/mach-adm5120/adm5120_platform.h>
  28
  29 #if 1
  30 /*
  31  * TODO:remove global adm5120_eth* variables when the switch driver will be
  32  *      converted into a real platform driver
  33  */
  34 unsigned int adm5120_eth_num_ports = 6;
  35 EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
  36
  37 unsigned char adm5120_eth_macs[6][6] = {
  38         {'\00', 'A', 'D', 'M', '\x51', '\x20' },
  39         {'\00', 'A', 'D', 'M', '\x51', '\x21' },
  40         {'\00', 'A', 'D', 'M', '\x51', '\x22' },
  41         {'\00', 'A', 'D', 'M', '\x51', '\x23' },
  42         {'\00', 'A', 'D', 'M', '\x51', '\x24' },
  43         {'\00', 'A', 'D', 'M', '\x51', '\x25' }
  44 };
  45 EXPORT_SYMBOL_GPL(adm5120_eth_macs);
  46
  47 unsigned char adm5120_eth_vlans[6] = {
  48         0x41, 0x42, 0x44, 0x48, 0x50, 0x60
  49 };
  50 EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
  51 #endif
  52
  53 void __init adm5120_setup_eth_macs(u8 *mac_base)
  54 {
  55         u32 t;
  56         int i, j;
  57
  58         t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8)
  59                 | ((u32) mac_base[5]);
  60
  61         for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) {
  62                 for (j = 0; j < 3; j++)
  63                         adm5120_eth_macs[i][j] = mac_base[j];
  64
  65                 adm5120_eth_macs[i][3] = (t >> 16) & 0xff;
  66                 adm5120_eth_macs[i][4] = (t >> 8) & 0xff;
  67                 adm5120_eth_macs[i][5] = t & 0xff;
  68
  69                 t++;
  70         }
  71 }
  72
  73 /*
  74  * Built-in ethernet switch
  75  */
  76 struct resource adm5120_switch_resources[] = {
  77         [0] = {
  78                 .start  = ADM5120_SWITCH_BASE,
  79                 .end    = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
  80                 .flags  = IORESOURCE_MEM,
  81         },
  82         [1] = {
  83                 .start  = ADM5120_IRQ_SWITCH,
  84                 .end    = ADM5120_IRQ_SWITCH,
  85                 .flags  = IORESOURCE_IRQ,
  86         },
  87 };
  88
  89 struct adm5120_switch_platform_data adm5120_switch_data;
  90 struct platform_device adm5120_switch_device = {
  91         .name           = "adm5120-switch",
  92         .id             = -1,
  93         .num_resources  = ARRAY_SIZE(adm5120_switch_resources),
  94         .resource       = adm5120_switch_resources,
  95         .dev.platform_data = &adm5120_switch_data,
  96 };
  97
  98 void __init adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map)
  99 {
 100         if (num_ports > 0)
 101                 adm5120_eth_num_ports = num_ports;
 102
 103         if (vlan_map)
 104                 memcpy(adm5120_eth_vlans, vlan_map, sizeof(adm5120_eth_vlans));
 105
 106         platform_device_register(&adm5120_switch_device);
 107 }
 108
 109 /*
 110  * USB Host Controller
 111  */
 112 struct resource adm5120_hcd_resources[] = {
 113         [0] = {
 114                 .start  = ADM5120_USBC_BASE,
 115                 .end    = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
 116                 .flags  = IORESOURCE_MEM,
 117         },
 118         [1] = {
 119                 .start  = ADM5120_IRQ_USBC,
 120                 .end    = ADM5120_IRQ_USBC,
 121                 .flags  = IORESOURCE_IRQ,
 122         },
 123 };
 124
 125 static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
 126 struct platform_device adm5120_hcd_device = {
 127         .name           = "adm5120-hcd",
 128         .id             = -1,
 129         .num_resources  = ARRAY_SIZE(adm5120_hcd_resources),
 130         .resource       = adm5120_hcd_resources,
 131         .dev = {
 132                 .dma_mask               = &adm5120_hcd_dma_mask,
 133                 .coherent_dma_mask      = DMA_BIT_MASK(24),
 134         }
 135 };
 136
 137 void __init adm5120_add_device_usb(void)
 138 {
 139         platform_device_register(&adm5120_hcd_device);
 140 }
 141
 142 /*
 143  * NOR flash devices
 144  */
 145 struct adm5120_flash_platform_data adm5120_flash0_data;
 146 struct platform_device adm5120_flash0_device =  {
 147         .name                   = "adm5120-flash",
 148         .id                     = 0,
 149         .dev.platform_data      = &adm5120_flash0_data,
 150 };
 151
 152 struct adm5120_flash_platform_data adm5120_flash1_data;
 153 struct platform_device adm5120_flash1_device =  {
 154         .name                   = "adm5120-flash",
 155         .id                     = 1,
 156         .dev.platform_data      = &adm5120_flash1_data,
 157 };
 158
 159 void __init adm5120_add_device_flash(unsigned id)
 160 {
 161         struct platform_device *pdev;
 162
 163         switch (id) {
 164         case 0:
 165                 pdev = &adm5120_flash0_device;
 166                 break;
 167         case 1:
 168                 pdev = &adm5120_flash1_device;
 169                 break;
 170         default:
 171                 pdev = NULL;
 172                 break;
 173         }
 174
 175         if (pdev)
 176                 platform_device_register(pdev);
 177 }
 178
 179 /*
 180  * built-in UARTs
 181  */
 182 static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
 183                 unsigned int mctrl)
 184 {
 185 }
 186
 187 struct amba_pl010_data adm5120_uart0_data = {
 188         .set_mctrl = adm5120_uart_set_mctrl
 189 };
 190
 191 struct amba_device adm5120_uart0_device = {
 192         .dev            = {
 193                 .bus_id = "APB:UART0",
 194                 .platform_data = &adm5120_uart0_data,
 195         },
 196         .res            = {
 197                 .start  = ADM5120_UART0_BASE,
 198                 .end    = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
 199                 .flags  = IORESOURCE_MEM,
 200         },
 201         .irq            = { ADM5120_IRQ_UART0, -1 },
 202         .periphid       = 0x0041010,
 203 };
 204
 205 struct amba_pl010_data adm5120_uart1_data = {
 206         .set_mctrl = adm5120_uart_set_mctrl
 207 };
 208
 209 struct amba_device adm5120_uart1_device = {
 210         .dev            = {
 211                 .bus_id = "APB:UART1",
 212                 .platform_data = &adm5120_uart1_data,
 213         },
 214         .res            = {
 215                 .start  = ADM5120_UART1_BASE,
 216                 .end    = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
 217                 .flags  = IORESOURCE_MEM,
 218         },
 219         .irq            = { ADM5120_IRQ_UART1, -1 },
 220         .periphid       = 0x0041010,
 221 };
 222
 223 void __init adm5120_add_device_uart(unsigned id)
 224 {
 225         struct amba_device *dev;
 226
 227         switch (id) {
 228         case 0:
 229                 dev = &adm5120_uart0_device;
 230                 break;
 231         case 1:
 232                 dev = &adm5120_uart1_device;
 233                 break;
 234         default:
 235                 dev = NULL;
 236                 break;
 237         }
 238
 239         if (dev)
 240                 amba_device_register(dev, &iomem_resource);
 241 }
 242
 243 /*
 244  * GPIO buttons
 245  */
 246 #define ADM5120_BUTTON_INTERVAL 20
 247 struct gpio_buttons_platform_data adm5120_gpio_buttons_data = {
 248         .poll_interval  = ADM5120_BUTTON_INTERVAL,
 249 };
 250
 251 struct platform_device adm5120_gpio_buttons_device = {
 252         .name           = "gpio-buttons",
 253         .id             = -1,
 254         .dev.platform_data = &adm5120_gpio_buttons_data,
 255 };
 256
 257 void __init adm5120_add_device_gpio_buttons(unsigned nbuttons,
 258                                     struct gpio_button *buttons)
 259 {
 260         struct gpio_button *p;
 261
 262         p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
 263         if (!p)
 264                 return;
 265
 266         memcpy(p, buttons, nbuttons * sizeof(*p));
 267         adm5120_gpio_buttons_data.nbuttons = nbuttons;
 268         adm5120_gpio_buttons_data.buttons = p;
 269
 270         platform_device_register(&adm5120_gpio_buttons_device);
 271 }
 272
 273 /*
 274  * GPIO LEDS
 275  */
 276 struct gpio_led_platform_data adm5120_gpio_leds_data;
 277 struct platform_device adm5120_gpio_leds_device = {
 278         .name           = "leds-gpio",
 279         .id             = -1,
 280         .dev.platform_data = &adm5120_gpio_leds_data,
 281 };
 282
 283 void __init adm5120_add_device_gpio_leds(unsigned num_leds,
 284                                     struct gpio_led *leds)
 285 {
 286         struct gpio_led *p;
 287
 288         p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
 289         if (!p)
 290                 return;
 291
 292         memcpy(p, leds, num_leds * sizeof(*p));
 293         adm5120_gpio_leds_data.num_leds = num_leds;
 294         adm5120_gpio_leds_data.leds = p;
 295
 296         platform_device_register(&adm5120_gpio_leds_device);
 297 }
 298
 299 /*
 300  * GPIO device
 301  */
 302 static struct resource adm5120_gpio_resource[] __initdata = {
 303         {
 304                 .start  = 0x3fffff,
 305         },
 306 };
 307
 308 void __init adm5120_add_device_gpio(u32 disable_mask)
 309 {
 310         if (adm5120_package_pqfp())
 311                 disable_mask |= 0xf0;
 312
 313         adm5120_gpio_resource[0].start &= ~disable_mask;
 314         platform_device_register_simple("GPIODEV", -1,
 315                         adm5120_gpio_resource,
 316                         ARRAY_SIZE(adm5120_gpio_resource));
 317 }
 318
 319 /*
 320  * NAND flash
 321  */
 322 struct resource adm5120_nand_resources[] = {
 323         [0] = {
 324                 .start  = ADM5120_NAND_BASE,
 325                 .end    = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
 326                 .flags  = IORESOURCE_MEM,
 327         },
 328 };
 329
 330 static int adm5120_nand_ready(struct mtd_info *mtd)
 331 {
 332         return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
 333 }
 334
 335 static void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 336                                         unsigned int ctrl)
 337 {
 338         if (ctrl & NAND_CTRL_CHANGE) {
 339                 adm5120_nand_set_cle(ctrl & NAND_CLE);
 340                 adm5120_nand_set_ale(ctrl & NAND_ALE);
 341                 adm5120_nand_set_cen(ctrl & NAND_NCE);
 342         }
 343
 344         if (cmd != NAND_CMD_NONE)
 345                 NAND_WRITE_REG(NAND_REG_DATA, cmd);
 346 }
 347
 348 void __init adm5120_add_device_nand(struct platform_nand_data *pdata)
 349 {
 350         struct platform_device *pdev;
 351         int err;
 352
 353         pdev = platform_device_alloc("gen_nand", -1);
 354         if (!pdev)
 355                 goto err_out;
 356
 357         err = platform_device_add_resources(pdev, adm5120_nand_resources,
 358                                         ARRAY_SIZE(adm5120_nand_resources));
 359         if (err)
 360                 goto err_put;
 361
 362         err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
 363         if (err)
 364                 goto err_put;
 365
 366         pdata = pdev->dev.platform_data;
 367         pdata->ctrl.dev_ready = adm5120_nand_ready;
 368         pdata->ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl;
 369
 370         err = platform_device_add(pdev);
 371         if (err)
 372                 goto err_put;
 373
 374         return;
 375
 376 err_put:
 377         platform_device_put(pdev);
 378 err_out:
 379         return;
 380 }