target/linux/ixp4xx/patches-2.6.31/207-npe_driver_multiphy_support.patch

   1 TODO: take care of additional PHYs through the PHY abstraction layer
   2
   3 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h
   4 +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
   5 @@ -72,7 +72,7 @@ extern unsigned long ixp4xx_exp_bus_size
   6  /*
   7   * Clock Speed Definitions.
   8   */
   9 -#define IXP4XX_PERIPHERAL_BUS_CLOCK    (66) /* 66Mhzi APB BUS   */
  10 +#define IXP4XX_PERIPHERAL_BUS_CLOCK    (66) /* 66Mhzi APB BUS   */
  11  #define IXP4XX_UART_XTAL               14745600
  12
  13  /*
  14 @@ -95,12 +95,23 @@ struct sys_timer;
  15  #define IXP4XX_ETH_NPEB                0x10
  16  #define IXP4XX_ETH_NPEC                0x20
  17
  18 +#define IXP4XX_ETH_PHY_MAX_ADDR        32
  19 +
  20  /* Information about built-in Ethernet MAC interfaces */
  21  struct eth_plat_info {
  22         u8 phy;         /* MII PHY ID, 0 - 31 */
  23         u8 rxq;         /* configurable, currently 0 - 31 only */
  24         u8 txreadyq;
  25         u8 hwaddr[6];
  26 +
  27 +       u32 phy_mask;
  28 +#if 0
  29 +       int speed;
  30 +       int duplex;
  31 +#else
  32 +       int speed_10;
  33 +       int half_duplex;
  34 +#endif
  35  };
  36
  37  /* Information about built-in HSS (synchronous serial) interfaces */
  38 --- a/drivers/net/arm/ixp4xx_eth.c
  39 +++ b/drivers/net/arm/ixp4xx_eth.c
  40 @@ -417,6 +417,37 @@ static int ixp4xx_phy_connect(struct net
  41         struct eth_plat_info *plat = port->plat;
  42         char phy_id[MII_BUS_ID_SIZE + 3];
  43
  44 +       if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
  45 +#if 0
  46 +               switch (plat->speed) {
  47 +               case SPEED_10:
  48 +               case SPEED_100:
  49 +                       break;
  50 +               default:
  51 +                       printk(KERN_ERR "%s: invalid speed (%d)\n",
  52 +                                       dev->name, plat->speed);
  53 +                       return -EINVAL;
  54 +               }
  55 +
  56 +               switch (plat->duplex) {
  57 +               case DUPLEX_HALF:
  58 +               case DUPLEX_FULL:
  59 +                       break;
  60 +               default:
  61 +                       printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
  62 +                                       dev->name, plat->duplex);
  63 +                       return -EINVAL;
  64 +               }
  65 +               port->speed = plat->speed;
  66 +               port->duplex = plat->duplex;
  67 +#else
  68 +               port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
  69 +               port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
  70 +#endif
  71 +
  72 +               return 0;
  73 +       }
  74 +
  75         snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
  76         port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
  77                                    PHY_INTERFACE_MODE_MII);
  78 @@ -445,21 +476,32 @@ static void ixp4xx_phy_disconnect(struct
  79  {
  80         struct port *port = netdev_priv(dev);
  81
  82 -       phy_disconnect(port->phydev);
  83 +       if (port->phydev)
  84 +               phy_disconnect(port->phydev);
  85  }
  86
  87  static void ixp4xx_phy_start(struct net_device *dev)
  88  {
  89         struct port *port = netdev_priv(dev);
  90
  91 -       phy_start(port->phydev);
  92 +       if (port->phydev) {
  93 +               phy_start(port->phydev);
  94 +       } else {
  95 +               port->link = 1;
  96 +               ixp4xx_update_link(dev);
  97 +       }
  98  }
  99
 100  static void ixp4xx_phy_stop(struct net_device *dev)
 101  {
 102         struct port *port = netdev_priv(dev);
 103
 104 -       phy_stop(port->phydev);
 105 +       if (port->phydev) {
 106 +               phy_stop(port->phydev);
 107 +       } else {
 108 +               port->link = 0;
 109 +               ixp4xx_update_link(dev);
 110 +       }
 111  }
 112
 113  static inline void debug_pkt(struct net_device *dev, const char *func,
 114 @@ -833,6 +875,10 @@ static int eth_ioctl(struct net_device *
 115
 116         if (!netif_running(dev))
 117                 return -EINVAL;
 118 +
 119 +       if (!port->phydev)
 120 +               return -EOPNOTSUPP;
 121 +
 122         return phy_mii_ioctl(port->phydev, if_mii(req), cmd);
 123  }
 124
 125 @@ -852,18 +898,30 @@ static void ixp4xx_get_drvinfo(struct ne
 126  static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 127  {
 128         struct port *port = netdev_priv(dev);
 129 +
 130 +       if (!port->phydev)
 131 +               return -EOPNOTSUPP;
 132 +
 133         return phy_ethtool_gset(port->phydev, cmd);
 134  }
 135
 136  static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 137  {
 138         struct port *port = netdev_priv(dev);
 139 +
 140 +       if (!port->phydev)
 141 +               return -EOPNOTSUPP;
 142 +
 143         return phy_ethtool_sset(port->phydev, cmd);
 144  }
 145
 146  static int ixp4xx_nway_reset(struct net_device *dev)
 147  {
 148         struct port *port = netdev_priv(dev);
 149 +
 150 +       if (!port->phydev)
 151 +               return -EOPNOTSUPP;
 152 +
 153         return phy_start_aneg(port->phydev);
 154  }
 155