make robocfg work with b44 (thx oleg)
[openwrt.git] / package / linux / kernel-patches / 020-drivers_mtd-jumbo
1 diff -Nur linux-mips-cvs/drivers/mtd/chips/Config.in linux-broadcom/drivers/mtd/chips/Config.in
2 --- linux-mips-cvs/drivers/mtd/chips/Config.in 2003-02-26 01:53:49.000000000 +0100
3 +++ linux-broadcom/drivers/mtd/chips/Config.in 2005-01-31 13:13:14.000000000 +0100
4 @@ -45,6 +45,7 @@
5 dep_tristate ' Support for Intel/Sharp flash chips' CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_GEN_PROBE
6 dep_tristate ' Support for AMD/Fujitsu flash chips' CONFIG_MTD_CFI_AMDSTD $CONFIG_MTD_GEN_PROBE
7 dep_tristate ' Support for ST (Advanced Architecture) flash chips' CONFIG_MTD_CFI_STAA $CONFIG_MTD_GEN_PROBE
8 +dep_tristate ' Support for SST flash chips' CONFIG_MTD_CFI_SSTSTD $CONFIG_MTD_GEN_PROBE
9
10 dep_tristate ' Support for RAM chips in bus mapping' CONFIG_MTD_RAM $CONFIG_MTD
11 dep_tristate ' Support for ROM chips in bus mapping' CONFIG_MTD_ROM $CONFIG_MTD
12 diff -Nur linux-mips-cvs/drivers/mtd/chips/Makefile linux-broadcom/drivers/mtd/chips/Makefile
13 --- linux-mips-cvs/drivers/mtd/chips/Makefile 2003-07-05 05:23:38.000000000 +0200
14 +++ linux-broadcom/drivers/mtd/chips/Makefile 2005-01-31 13:13:14.000000000 +0100
15 @@ -18,6 +18,7 @@
16 obj-$(CONFIG_MTD_AMDSTD) += amd_flash.o
17 obj-$(CONFIG_MTD_CFI) += cfi_probe.o
18 obj-$(CONFIG_MTD_CFI_STAA) += cfi_cmdset_0020.o
19 +obj-$(CONFIG_MTD_CFI_SSTSTD) += cfi_cmdset_0701.o
20 obj-$(CONFIG_MTD_CFI_AMDSTD) += cfi_cmdset_0002.o
21 obj-$(CONFIG_MTD_CFI_INTELEXT) += cfi_cmdset_0001.o
22 obj-$(CONFIG_MTD_GEN_PROBE) += gen_probe.o
23 diff -Nur linux-mips-cvs/drivers/mtd/chips/cfi_probe.c linux-broadcom/drivers/mtd/chips/cfi_probe.c
24 --- linux-mips-cvs/drivers/mtd/chips/cfi_probe.c 2003-02-26 01:53:49.000000000 +0100
25 +++ linux-broadcom/drivers/mtd/chips/cfi_probe.c 2005-01-31 13:13:14.000000000 +0100
26 @@ -67,8 +67,15 @@
27 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
28 cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
29
30 - if (!qry_present(map,base,cfi))
31 - return 0;
32 + if (!qry_present(map,base,cfi)) {
33 + /* rather broken SST cfi probe (requires SST unlock) */
34 + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
35 + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
36 + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
37 + cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
38 + if (!qry_present(map,base,cfi))
39 + return 0;
40 + }
41
42 if (!cfi->numchips) {
43 /* This is the first time we're called. Set up the CFI
44 diff -Nur linux-mips-cvs/drivers/mtd/chips/gen_probe.c linux-broadcom/drivers/mtd/chips/gen_probe.c
45 --- linux-mips-cvs/drivers/mtd/chips/gen_probe.c 2003-08-13 19:19:18.000000000 +0200
46 +++ linux-broadcom/drivers/mtd/chips/gen_probe.c 2005-01-31 13:13:14.000000000 +0100
47 @@ -332,9 +332,13 @@
48 return cfi_cmdset_0002(map, primary);
49 #endif
50 #ifdef CONFIG_MTD_CFI_STAA
51 - case 0x0020:
52 + case 0x0020:
53 return cfi_cmdset_0020(map, primary);
54 #endif
55 +#ifdef CONFIG_MTD_CFI_SSTSTD
56 + case 0x0701:
57 + return cfi_cmdset_0701(map, primary);
58 +#endif
59 }
60
61 return cfi_cmdset_unknown(map, primary);
62 diff -Nur linux-mips-cvs/drivers/mtd/devices/Config.in linux-broadcom/drivers/mtd/devices/Config.in
63 --- linux-mips-cvs/drivers/mtd/devices/Config.in 2003-02-26 01:53:49.000000000 +0100
64 +++ linux-broadcom/drivers/mtd/devices/Config.in 2005-01-31 13:13:14.000000000 +0100
65 @@ -5,6 +5,7 @@
66 mainmenu_option next_comment
67
68 comment 'Self-contained MTD device drivers'
69 +bool ' Broadcom Chipcommon Serial Flash support' CONFIG_MTD_SFLASH
70 dep_tristate ' Ramix PMC551 PCI Mezzanine RAM card support' CONFIG_MTD_PMC551 $CONFIG_MTD $CONFIG_PCI
71 if [ "$CONFIG_MTD_PMC551" = "y" -o "$CONFIG_MTD_PMC551" = "m" ]; then
72 bool ' PMC551 256M DRAM Bugfix' CONFIG_MTD_PMC551_BUGFIX
73 diff -Nur linux-mips-cvs/drivers/mtd/devices/Makefile linux-broadcom/drivers/mtd/devices/Makefile
74 --- linux-mips-cvs/drivers/mtd/devices/Makefile 2002-03-30 09:15:50.000000000 +0100
75 +++ linux-broadcom/drivers/mtd/devices/Makefile 2005-01-31 13:13:14.000000000 +0100
76 @@ -12,6 +12,7 @@
77 # here where previously there was none. We now have to ensure that
78 # doc200[01].o are linked before docprobe.o
79
80 +obj-$(CONFIG_MTD_SFLASH) += sflash.o
81 obj-$(CONFIG_MTD_DOC1000) += doc1000.o
82 obj-$(CONFIG_MTD_DOC2000) += doc2000.o
83 obj-$(CONFIG_MTD_DOC2001) += doc2001.o
84 diff -Nur linux-mips-cvs/drivers/mtd/maps/Config.in linux-broadcom/drivers/mtd/maps/Config.in
85 --- linux-mips-cvs/drivers/mtd/maps/Config.in 2004-02-26 01:46:35.000000000 +0100
86 +++ linux-broadcom/drivers/mtd/maps/Config.in 2005-01-31 13:13:14.000000000 +0100
87 @@ -48,6 +48,7 @@
88 fi
89
90 if [ "$CONFIG_MIPS" = "y" ]; then
91 + dep_tristate ' CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
92 dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
93 dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
94 dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
95 diff -Nur linux-mips-cvs/drivers/mtd/maps/Makefile linux-broadcom/drivers/mtd/maps/Makefile
96 --- linux-mips-cvs/drivers/mtd/maps/Makefile 2004-02-26 01:46:35.000000000 +0100
97 +++ linux-broadcom/drivers/mtd/maps/Makefile 2005-01-31 13:13:14.000000000 +0100
98 @@ -10,6 +10,7 @@
99 endif
100
101 # Chip mappings
102 +obj-$(CONFIG_MTD_BCM947XX) += bcm947xx-flash.o
103 obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
104 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
105 obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
This page took 0.045145 seconds and 5 git commands to generate.