projects / openwrt.git / blob
? search:


78e5afe9bd4ac3a0f90da2c7b6a935e113b01d40
[openwrt.git] / target / linux / generic-2.6 / files-2.6.23 / drivers / net / phy / mvswitch.c
1 /*
2 * Marvell 88E6060 switch driver
3 * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License v2 as published by the
7 * Free Software Foundation
8 */
9 #include <linux/kernel.h>
10 #include <linux/string.h>
11 #include <linux/errno.h>
12 #include <linux/unistd.h>
13 #include <linux/slab.h>
14 #include <linux/interrupt.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/netdevice.h>
18 #include <linux/etherdevice.h>
19 #include <linux/skbuff.h>
20 #include <linux/spinlock.h>
21 #include <linux/mm.h>
22 #include <linux/module.h>
23 #include <linux/mii.h>
24 #include <linux/ethtool.h>
25 #include <linux/phy.h>
26 #include <linux/if_vlan.h>
27
28 #include <asm/io.h>
29 #include <asm/irq.h>
30 #include <asm/uaccess.h>
31 #include "mvswitch.h"
32
33 /* Undefine this to use trailer mode instead.
34 * I don't know if header mode works with all chips */
35 #define HEADER_MODE 1
36
37 MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
38 MODULE_AUTHOR("Felix Fietkau");
39 MODULE_LICENSE("GPL");
40
41 struct mvswitch_priv {
42 /* the driver's tx function */
43 int (*hardstart)(struct sk_buff *skb, struct net_device *dev);
44 struct vlan_group *grp;
45 u8 vlans[16];
46 };
47
48 #define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv)
49
50 static inline u16
51 r16(struct phy_device *phydev, int addr, int reg)
52 {
53 return phydev->bus->read(phydev->bus, addr, reg);
54 }
55
56 static inline void
57 w16(struct phy_device *phydev, int addr, int reg, u16 val)
58 {
59 phydev->bus->write(phydev->bus, addr, reg, val);
60 }
61
62
63 static int
64 mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
65 {
66 struct mvswitch_priv *priv;
67 char *buf = NULL;
68 u16 vid;
69
70 priv = dev->phy_ptr;
71 if (unlikely(!priv))
72 goto error;
73
74 if (unlikely(skb->len < 16))
75 goto error;
76
77 #ifdef HEADER_MODE
78 if (__vlan_hwaccel_get_tag(skb, &vid))
79 goto error;
80
81 if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
82 if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC))
83 goto error_expand;
84 if (skb->len < 62)
85 skb->len = 62;
86 }
87 buf = skb_push(skb, MV_HEADER_SIZE);
88 #else
89 if (__vlan_get_tag(skb, &vid))
90 goto error;
91
92 if (unlikely((vid > 15 || !priv->vlans[vid])))
93 goto error;
94
95 if (skb->len <= 64) {
96 if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
97 goto error_expand;
98
99 buf = skb->data + 64;
100 skb->len = 64 + MV_TRAILER_SIZE;
101 } else {
102 if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
103 if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
104 goto error_expand;
105 }
106 buf = skb_put(skb, 4);
107 }
108
109 /* move the ethernet header 4 bytes forward, overwriting the vlan tag */
110 memmove(skb->data + 4, skb->data, 12);
111 skb->data += 4;
112 skb->len -= 4;
113 skb->mac_header += 4;
114 #endif
115
116 if (!buf)
117 goto error;
118
119
120 #ifdef HEADER_MODE
121 /* prepend the tag */
122 *((__be16 *) buf) = cpu_to_be16(
123 ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
124 ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
125 );
126 #else
127 /* append the tag */
128 *((__be32 *) buf) = cpu_to_be32((
129 (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
130 ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
131 ));
132 #endif
133
134 return priv->hardstart(skb, dev);
135
136 error_expand:
137 if (net_ratelimit())
138 printk("%s: failed to expand/update skb for the switch\n", dev->name);
139
140 error:
141 /* any errors? drop the packet! */
142 dev_kfree_skb_any(skb);
143 return 0;
144 }
145
146 static int
147 mvswitch_mangle_rx(struct sk_buff *skb, int napi)
148 {
149 struct mvswitch_priv *priv;
150 struct net_device *dev;
151 int vlan = -1;
152 unsigned char *buf;
153 int i;
154
155 dev = skb->dev;
156 if (!dev)
157 goto error;
158
159 priv = dev->phy_ptr;
160 if (!priv)
161 goto error;
162
163 if (!priv->grp)
164 goto error;
165
166 #ifdef HEADER_MODE
167 buf = skb->data;
168 skb_pull(skb, MV_HEADER_SIZE);
169 #else
170 buf = skb->data + skb->len - MV_TRAILER_SIZE;
171 if (buf[0] != 0x80)
172 goto error;
173 #endif
174
175 /* look for the vlan matching the incoming port */
176 for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
177 if ((1 << buf[1]) & priv->vlans[i])
178 vlan = i;
179 }
180
181 if (vlan == -1)
182 goto error;
183
184 skb->protocol = eth_type_trans(skb, skb->dev);
185
186 if (napi)
187 return vlan_hwaccel_receive_skb(skb, priv->grp, vlan);
188 else
189 return vlan_hwaccel_rx(skb, priv->grp, vlan);
190
191 error:
192 /* no vlan? eat the packet! */
193 dev_kfree_skb_any(skb);
194 return 0;
195 }
196
197
198 static int
199 mvswitch_netif_rx(struct sk_buff *skb)
200 {
201 return mvswitch_mangle_rx(skb, 0);
202 }
203
204 static int
205 mvswitch_netif_receive_skb(struct sk_buff *skb)
206 {
207 return mvswitch_mangle_rx(skb, 1);
208 }
209
210
211 static void
212 mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
213 {
214 struct mvswitch_priv *priv = dev->phy_ptr;
215 priv->grp = grp;
216 }
217
218
219 static int
220 mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val)
221 {
222 int i = 100;
223 u16 r;
224
225 do {
226 r = r16(pdev, addr, reg) & mask;
227 if (r == val)
228 return 0;
229 } while(--i > 0);
230 return -ETIMEDOUT;
231 }
232
233 static int
234 mvswitch_config_init(struct phy_device *pdev)
235 {
236 struct mvswitch_priv *priv = to_mvsw(pdev);
237 struct net_device *dev = pdev->attached_dev;
238 u8 vlmap = 0;
239 int i;
240
241 if (!dev)
242 return -EINVAL;
243
244 printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name);
245 pdev->supported = ADVERTISED_100baseT_Full;
246 pdev->advertising = ADVERTISED_100baseT_Full;
247 dev->phy_ptr = priv;
248 dev->irq = PHY_POLL;
249
250 /* initialize default vlans */
251 for (i = 0; i < MV_PORTS; i++)
252 priv->vlans[(i == MV_WANPORT ? 1 : 0)] |= (1 << i);
253
254 /* before entering reset, disable all ports */
255 for (i = 0; i < MV_PORTS; i++)
256 w16(pdev, MV_PORTREG(CONTROL, i), 0x00);
257
258 msleep(2); /* wait for the status change to settle in */
259
260 /* put the ATU in reset */
261 w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET);
262
263 i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0);
264 if (i < 0) {
265 printk("%s: Timeout waiting for the switch to reset.\n", dev->name);
266 return i;
267 }
268
269 /* set the ATU flags */
270 w16(pdev, MV_SWITCHREG(ATU_CTRL),
271 MV_ATUCTL_NO_LEARN |
272 MV_ATUCTL_ATU_1K |
273 MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */
274 );
275
276 /* initialize the cpu port */
277 w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
278 #ifdef HEADER_MODE
279 MV_PORTCTRL_HEADER |
280 #else
281 MV_PORTCTRL_RXTR |
282 MV_PORTCTRL_TXTR |
283 #endif
284 MV_PORTCTRL_ENABLED
285 );
286 /* wait for the phy change to settle in */
287 msleep(2);
288 for (i = 0; i < MV_PORTS; i++) {
289 u8 pvid = 0;
290 int j;
291
292 vlmap = 0;
293
294 /* look for the matching vlan */
295 for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) {
296 if (priv->vlans[j] & (1 << i)) {
297 vlmap = priv->vlans[j];
298 pvid = j;
299 }
300 }
301 /* leave port unconfigured if it's not part of a vlan */
302 if (!vlmap)
303 continue;
304
305 /* add the cpu port to the allowed destinations list */
306 vlmap |= (1 << MV_CPUPORT);
307
308 /* take port out of its own vlan destination map */
309 vlmap &= ~(1 << i);
310
311 /* apply vlan settings */
312 w16(pdev, MV_PORTREG(VLANMAP, i),
313 MV_PORTVLAN_PORTS(vlmap) |
314 MV_PORTVLAN_ID(i)
315 );
316
317 /* re-enable port */
318 w16(pdev, MV_PORTREG(CONTROL, i),
319 MV_PORTCTRL_ENABLED
320 );
321 }
322
323 w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT),
324 MV_PORTVLAN_ID(MV_CPUPORT)
325 );
326
327 /* set the port association vector */
328 for (i = 0; i <= MV_PORTS; i++) {
329 w16(pdev, MV_PORTREG(ASSOC, i),
330 MV_PORTASSOC_PORTS(1 << i)
331 );
332 }
333
334 /* init switch control */
335 w16(pdev, MV_SWITCHREG(CTRL),
336 MV_SWITCHCTL_MSIZE |
337 MV_SWITCHCTL_DROP
338 );
339
340 /* hook into the tx function */
341 priv->hardstart = dev->hard_start_xmit;
342 pdev->netif_receive_skb = mvswitch_netif_receive_skb;
343 pdev->netif_rx = mvswitch_netif_rx;
344 dev->hard_start_xmit = mvswitch_mangle_tx;
345 dev->vlan_rx_register = mvswitch_vlan_rx_register;
346 #ifdef HEADER_MODE
347 dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
348 #else
349 dev->features |= NETIF_F_HW_VLAN_RX;
350 #endif
351
352 return 0;
353 }
354
355 static int
356 mvswitch_read_status(struct phy_device *pdev)
357 {
358 pdev->speed = SPEED_100;
359 pdev->duplex = DUPLEX_FULL;
360 pdev->state = PHY_UP;
361
362 /* XXX ugly workaround: we can't force the switch
363 * to gracefully handle hosts moving from one port to another,
364 * so we have to regularly clear the ATU database */
365
366 /* wait for the ATU to become available */
367 mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
368
369 /* flush the ATU */
370 w16(pdev, MV_SWITCHREG(ATU_OP),
371 MV_ATUOP_INPROGRESS |
372 MV_ATUOP_FLUSH_ALL
373 );
374
375 /* wait for operation to complete */
376 mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
377
378 return 0;
379 }
380
381 static int
382 mvswitch_config_aneg(struct phy_device *phydev)
383 {
384 return 0;
385 }
386
387 static void
388 mvswitch_remove(struct phy_device *pdev)
389 {
390 struct mvswitch_priv *priv = to_mvsw(pdev);
391 struct net_device *dev = pdev->attached_dev;
392
393 /* restore old xmit handler */
394 if (priv->hardstart && dev)
395 dev->hard_start_xmit = priv->hardstart;
396 dev->vlan_rx_register = NULL;
397 dev->vlan_rx_kill_vid = NULL;
398 dev->phy_ptr = NULL;
399 dev->features &= ~NETIF_F_HW_VLAN_RX;
400 kfree(priv);
401 }
402
403 static bool
404 mvswitch_detect(struct mii_bus *bus, int addr)
405 {
406 u16 reg;
407 int i;
408
409 /* we attach to phy id 31 to make sure that the late probe works */
410 if (addr != 31)
411 return false;
412
413 /* look for the switch on the bus */
414 reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
415 if (reg != MV_IDENT_VALUE)
416 return false;
417
418 /*
419 * Now that we've established that the switch actually exists, let's
420 * get rid of the competition :)
421 */
422 for (i = 0; i < 31; i++) {
423 if (!bus->phy_map[i])
424 continue;
425
426 device_unregister(&bus->phy_map[i]->dev);
427 kfree(bus->phy_map[i]);
428 bus->phy_map[i] = NULL;
429 }
430
431 return true;
432 }
433
434 static int
435 mvswitch_probe(struct phy_device *pdev)
436 {
437 struct mvswitch_priv *priv;
438
439 priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL);
440 if (priv == NULL)
441 return -ENOMEM;
442
443 pdev->priv = priv;
444
445 return 0;
446 }
447
448
449 static struct phy_driver mvswitch_driver = {
450 .name = "Marvell 88E6060",
451 .features = PHY_BASIC_FEATURES,
452 .detect = &mvswitch_detect,
453 .probe = &mvswitch_probe,
454 .remove = &mvswitch_remove,
455 .config_init = &mvswitch_config_init,
456 .config_aneg = &mvswitch_config_aneg,
457 .read_status = &mvswitch_read_status,
458 .driver = { .owner = THIS_MODULE,},
459 };
460
461 static int __init
462 mvswitch_init(void)
463 {
464 return phy_driver_register(&mvswitch_driver);
465 }
466
467 static void __exit
468 mvswitch_exit(void)
469 {
470 phy_driver_unregister(&mvswitch_driver);
471 }
472
473 module_init(mvswitch_init);
474 module_exit(mvswitch_exit);
Personal OpenWRT clone
This page took 0.064641 seconds and 3 git commands to generate.