New RTC platform driver for Epson RTC7301.
[openwrt.git] / target / linux / rb532 / patches-2.6.23 / 100-rb5xx_support.patch
1 Index: linux-2.6.23.17/arch/mips/Kconfig
2 ===================================================================
3 --- linux-2.6.23.17.orig/arch/mips/Kconfig
4 +++ linux-2.6.23.17/arch/mips/Kconfig
5 @@ -595,6 +595,20 @@ config WR_PPMC
6 This enables support for the Wind River MIPS32 4KC PPMC evaluation
7 board, which is based on GT64120 bridge chip.
8
9 +config MIKROTIK_RB500
10 + bool "Support for RB5xx boards"
11 + select HW_HAS_PCI
12 + select IRQ_CPU
13 + select SYS_HAS_CPU_MIPS32_R1
14 + select SYS_SUPPORTS_LITTLE_ENDIAN
15 + select SYS_SUPPORTS_32BIT_KERNEL
16 + select SWAP_IO_SPACE
17 + select DMA_NONCOHERENT
18 + select GENERIC_GPIO
19 + help
20 + Support the Mikrotik(tm) Routerboard 500 series,
21 + such as the RB532.
22 +
23 endchoice
24
25 source "arch/mips/au1000/Kconfig"
26 @@ -829,6 +843,7 @@ config MIPS_L1_CACHE_SHIFT
27 default "4" if MACH_DECSTATION
28 default "7" if SGI_IP27 || SNI_RM
29 default "4" if PMC_MSP4200_EVAL
30 + default "4" if MIKROTIK_RB500
31 default "5"
32
33 config HAVE_STD_PC_SERIAL_PORT
34 Index: linux-2.6.23.17/arch/mips/Makefile
35 ===================================================================
36 --- linux-2.6.23.17.orig/arch/mips/Makefile
37 +++ linux-2.6.23.17/arch/mips/Makefile
38 @@ -300,6 +300,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff
39 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
40
41 #
42 +# Routerboard 532 board
43 +#
44 +core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/
45 +cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
46 +load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000
47 +
48 +#
49 # For all MIPS, Inc. eval boards
50 #
51 core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
52 Index: linux-2.6.23.17/arch/mips/pci/Makefile
53 ===================================================================
54 --- linux-2.6.23.17.orig/arch/mips/pci/Makefile
55 +++ linux-2.6.23.17/arch/mips/pci/Makefile
56 @@ -46,3 +46,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
57 obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
58 obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
59 obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
60 +obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o
61 Index: linux-2.6.23.17/drivers/pci/Makefile
62 ===================================================================
63 --- linux-2.6.23.17.orig/drivers/pci/Makefile
64 +++ linux-2.6.23.17/drivers/pci/Makefile
65 @@ -32,6 +32,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
66 obj-$(CONFIG_PPC64) += setup-bus.o
67 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
68 obj-$(CONFIG_X86_VISWS) += setup-irq.o
69 +obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
70
71 #
72 # ACPI Related PCI FW Functions
73 Index: linux-2.6.23.17/include/asm-mips/bootinfo.h
74 ===================================================================
75 --- linux-2.6.23.17.orig/include/asm-mips/bootinfo.h
76 +++ linux-2.6.23.17/include/asm-mips/bootinfo.h
77 @@ -208,6 +208,11 @@
78 #define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
79 #define MACH_WRPPMC 1
80
81 +
82 +#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */
83 +#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
84 +#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
85 +
86 #define CL_SIZE COMMAND_LINE_SIZE
87
88 const char *get_system_type(void);
89 Index: linux-2.6.23.17/include/asm-mips/cpu.h
90 ===================================================================
91 --- linux-2.6.23.17.orig/include/asm-mips/cpu.h
92 +++ linux-2.6.23.17/include/asm-mips/cpu.h
93 @@ -217,8 +217,9 @@
94 #define CPU_R14000 64
95 #define CPU_LOONGSON1 65
96 #define CPU_LOONGSON2 66
97 +#define CPU_RC32300 67
98
99 -#define CPU_LAST 66
100 +#define CPU_LAST 67
101
102 /*
103 * ISA Level encodings
This page took 0.044718 seconds and 5 git commands to generate.