89650d1ea31a742e3c4220061a48dd077513cd28
1 #ifndef __BCM63XX_TAG_H
2 #define __BCM63XX_TAG_H
4 #define TAGVER_LEN 4 /* Length of Tag Version */
5 #define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */
6 #define SIG1_LEN 20 /* Company Signature 1 Length */
7 #define SIG2_LEN 14 /* Company Signature 2 Lenght */
8 #define BOARDID_LEN 16 /* Length of BoardId */
9 #define ENDIANFLAG_LEN 2 /* Endian Flag Length */
10 #define CHIPID_LEN 6 /* Chip Id Length */
11 #define IMAGE_LEN 10 /* Length of Length Field */
12 #define ADDRESS_LEN 12 /* Length of Address field */
13 #define DUALFLAG_LEN 2 /* Dual Image flag Length */
14 #define INACTIVEFLAG_LEN 2 /* Inactie Flag Length */
15 #define RSASIG_LEN 20 /* Length of RSA Signature in tag */
16 #define TAGINFO1_LEN 30 /* Length of vendor information field1 in tag */
17 #define FLASHLAYOUTVER_LEN 4 /* Length of Flash Layout Version String tag */
18 #define TAGINFO2_LEN 16 /* Length of vendor information field2 in tag */
19 #define CRC_LEN 4 /* Length of CRC in bytes */
20 #define ALTTAGINFO_LEN 54 /* Alternate length for vendor information; Pirelli */
23 #define IMAGETAG_CRC_START 0xFFFFFFFF
25 #define PIRELLI_BOARDS { \
31 * The broadcom firmware assumes the rootfs starts the image,
32 * therefore uses the rootfs start (flashImageAddress)
33 * to determine where to flash the image. Since we have the kernel first
34 * we have to give it the kernel address, but the crc uses the length
35 * associated with this address (rootLength), which is added to the kernel
36 * length (kernelLength) to determine the length of image to flash and thus
37 * needs to be rootfs + deadcode (jffs2 EOF marker)
41 char tagVersion
[TAGVER_LEN
]; // 0-3: Version of the image tag
42 char sig_1
[SIG1_LEN
]; // 4-23: Company Line 1
43 char sig_2
[SIG2_LEN
]; // 24-37: Company Line 2
44 char chipid
[CHIPID_LEN
]; // 38-43: Chip this image is for
45 char boardid
[BOARDID_LEN
]; // 44-59: Board name
46 char big_endian
[ENDIANFLAG_LEN
]; // 60-61: Map endianness -- 1 BE 0 LE
47 char totalLength
[IMAGE_LEN
]; // 62-71: Total length of image
48 char cfeAddress
[ADDRESS_LEN
]; // 72-83: Address in memory of CFE
49 char cfeLength
[IMAGE_LEN
]; // 84-93: Size of CFE
50 char flashImageStart
[ADDRESS_LEN
]; // 94-105: Address in memory of image start (kernel for OpenWRT, rootfs for stock firmware)
51 char flashRootLength
[IMAGE_LEN
]; // 106-115: Size of rootfs for flashing
52 char kernelAddress
[ADDRESS_LEN
]; // 116-127: Address in memory of kernel
53 char kernelLength
[IMAGE_LEN
]; // 128-137: Size of kernel
54 char dualImage
[DUALFLAG_LEN
]; // 138-139: Unused at present
55 char inactiveFlag
[INACTIVEFLAG_LEN
]; // 140-141: Unused at present
56 char rsa_signature
[RSASIG_LEN
]; // 142-161: RSA Signature (unused at present; some vendors may use this)
57 char information1
[TAGINFO1_LEN
]; // 162-191: Compilation and related information (not generated/used by OpenWRT)
58 char flashLayoutVer
[FLASHLAYOUTVER_LEN
];// 192-195: Version flash layout
59 char fskernelCRC
[CRC_LEN
]; // 196-199: kernel+rootfs CRC32
60 char information2
[TAGINFO2_LEN
]; // 200-215: Unused at present except Alice Gate where is is information
61 char imageCRC
[CRC_LEN
]; // 216-219: CRC32 of image less imagetag (kernel for Alice Gate)
62 char rootfsCRC
[CRC_LEN
]; // 220-223: CRC32 of rootfs partition
63 char kernelCRC
[CRC_LEN
]; // 224-227: CRC32 of kernel partition
64 char rootLength
[4]; // 228-231: steal from reserved1 to keep the real root length so we can use in the flash map even after we have change the rootLength to 0 to satisfy devices that check CRC on every boot
65 char reserved1
[4]; // 232-235: Unused at present
66 char headerCRC
[CRC_LEN
]; // 236-239: CRC32 of header excluding tagVersion
67 char reserved2
[16]; // 240-255: Unused at present
70 #endif /* __BCM63XX_TAG_H */
This page took 0.046124 seconds and 3 git commands to generate.