projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
[package] base-files: update sysctl.conf for modern kernels
[openwrt.git] / target / linux / generic / patches-2.6.31 / 941-ssb_update.patch
1 --- a/drivers/ssb/Kconfig
2 +++ b/drivers/ssb/Kconfig
3 @@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
4
5 If unsure, say N
6
7 +config SSB_SDIOHOST_POSSIBLE
8 + bool
9 + depends on SSB && (MMC = y || MMC = SSB)
10 + default y
11 +
12 +config SSB_SDIOHOST
13 + bool "Support for SSB on SDIO-bus host"
14 + depends on SSB_SDIOHOST_POSSIBLE
15 + help
16 + Support for a Sonics Silicon Backplane on top
17 + of a SDIO device.
18 +
19 + If unsure, say N
20 +
21 config SSB_SILENT
22 bool "No SSB kernel messages"
23 depends on SSB && EMBEDDED
24 --- a/drivers/ssb/Makefile
25 +++ b/drivers/ssb/Makefile
26 @@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
27 # host support
28 ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
29 ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
30 +ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
31
32 # built-in drivers
33 ssb-y += driver_chipcommon.o
34 --- a/drivers/ssb/b43_pci_bridge.c
35 +++ b/drivers/ssb/b43_pci_bridge.c
36 @@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc
37 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
38 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
39 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
40 + { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
41 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
42 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
43 { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
44 --- a/drivers/ssb/driver_chipcommon.c
45 +++ b/drivers/ssb/driver_chipcommon.c
46 @@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
47 }
48 }
49
50 +/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
51 +static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
52 +{
53 + struct ssb_bus *bus = cc->dev->bus;
54 +
55 + switch (bus->chip_id) {
56 + case 0x4312:
57 + case 0x4322:
58 + case 0x4328:
59 + return 7000;
60 + case 0x4325:
61 + /* TODO: */
62 + default:
63 + return 15000;
64 + }
65 +}
66 +
67 +/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
68 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
69 {
70 struct ssb_bus *bus = cc->dev->bus;
71 @@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
72
73 if (bus->bustype != SSB_BUSTYPE_PCI)
74 return;
75 +
76 + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
77 + cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
78 + return;
79 + }
80 +
81 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
82 return;
83
84 @@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip
85 {
86 if (!cc->dev)
87 return; /* We don't have a ChipCommon */
88 + if (cc->dev->id.revision >= 11)
89 + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
90 + ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
91 ssb_pmu_init(cc);
92 chipco_powercontrol_init(cc);
93 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
94 @@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
95 {
96 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
97 }
98 +EXPORT_SYMBOL(ssb_chipco_gpio_control);
99
100 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
101 {
102 --- a/drivers/ssb/driver_chipcommon_pmu.c
103 +++ b/drivers/ssb/driver_chipcommon_pmu.c
104 @@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
105 chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
106 }
107
108 +static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
109 + u32 offset, u32 mask, u32 set)
110 +{
111 + u32 value;
112 +
113 + chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
114 + chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
115 + chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
116 + value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
117 + value &= mask;
118 + value |= set;
119 + chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
120 + chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
121 +}
122 +
123 struct pmu0_plltab_entry {
124 u16 freq; /* Crystal frequency in kHz.*/
125 u8 xf; /* Crystal frequency value for PMU control */
126 @@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
127 case 0x5354:
128 ssb_pmu0_pllinit_r0(cc, crystalfreq);
129 break;
130 + case 0x4322:
131 + if (cc->pmu.rev == 2) {
132 + chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
133 + chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
134 + }
135 + break;
136 default:
137 ssb_printk(KERN_ERR PFX
138 "ERROR: PLL init unknown for device %04X\n",
139 @@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc
140
141 switch (bus->chip_id) {
142 case 0x4312:
143 + case 0x4322:
144 /* We keep the default settings:
145 * min_msk = 0xCBB
146 * max_msk = 0x7FFFF
147 @@ -480,9 +502,9 @@ static void ssb_pmu_resources_init(struc
148 chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
149 }
150
151 +/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
152 void ssb_pmu_init(struct ssb_chipcommon *cc)
153 {
154 - struct ssb_bus *bus = cc->dev->bus;
155 u32 pmucap;
156
157 if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
158 @@ -494,15 +516,91 @@ void ssb_pmu_init(struct ssb_chipcommon
159 ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
160 cc->pmu.rev, pmucap);
161
162 - if (cc->pmu.rev >= 1) {
163 - if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
164 - chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
165 - ~SSB_CHIPCO_PMU_CTL_NOILPONW);
166 - } else {
167 - chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
168 - SSB_CHIPCO_PMU_CTL_NOILPONW);
169 - }
170 - }
171 + if (cc->pmu.rev == 1)
172 + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
173 + ~SSB_CHIPCO_PMU_CTL_NOILPONW);
174 + else
175 + chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
176 + SSB_CHIPCO_PMU_CTL_NOILPONW);
177 ssb_pmu_pll_init(cc);
178 ssb_pmu_resources_init(cc);
179 }
180 +
181 +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
182 + enum ssb_pmu_ldo_volt_id id, u32 voltage)
183 +{
184 + struct ssb_bus *bus = cc->dev->bus;
185 + u32 addr, shift, mask;
186 +
187 + switch (bus->chip_id) {
188 + case 0x4328:
189 + case 0x5354:
190 + switch (id) {
191 + case LDO_VOLT1:
192 + addr = 2;
193 + shift = 25;
194 + mask = 0xF;
195 + break;
196 + case LDO_VOLT2:
197 + addr = 3;
198 + shift = 1;
199 + mask = 0xF;
200 + break;
201 + case LDO_VOLT3:
202 + addr = 3;
203 + shift = 9;
204 + mask = 0xF;
205 + break;
206 + case LDO_PAREF:
207 + addr = 3;
208 + shift = 17;
209 + mask = 0x3F;
210 + break;
211 + default:
212 + SSB_WARN_ON(1);
213 + return;
214 + }
215 + break;
216 + case 0x4312:
217 + if (SSB_WARN_ON(id != LDO_PAREF))
218 + return;
219 + addr = 0;
220 + shift = 21;
221 + mask = 0x3F;
222 + break;
223 + default:
224 + return;
225 + }
226 +
227 + ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
228 + (voltage & mask) << shift);
229 +}
230 +
231 +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
232 +{
233 + struct ssb_bus *bus = cc->dev->bus;
234 + int ldo;
235 +
236 + switch (bus->chip_id) {
237 + case 0x4312:
238 + ldo = SSB_PMURES_4312_PA_REF_LDO;
239 + break;
240 + case 0x4328:
241 + ldo = SSB_PMURES_4328_PA_REF_LDO;
242 + break;
243 + case 0x5354:
244 + ldo = SSB_PMURES_5354_PA_REF_LDO;
245 + break;
246 + default:
247 + return;
248 + }
249 +
250 + if (on)
251 + chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
252 + else
253 + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
254 + chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
255 +}
256 +
257 +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
258 +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
259 --- a/drivers/ssb/driver_gige.c
260 +++ b/drivers/ssb/driver_gige.c
261 @@ -12,6 +12,7 @@
262 #include <linux/ssb/ssb_driver_gige.h>
263 #include <linux/pci.h>
264 #include <linux/pci_regs.h>
265 +#include <linux/slab.h>
266
267
268 /*
269 --- a/drivers/ssb/driver_mipscore.c
270 +++ b/drivers/ssb/driver_mipscore.c
271 @@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
272 set_irq(dev, irq++);
273 }
274 break;
275 - /* fallthrough */
276 case SSB_DEV_PCI:
277 case SSB_DEV_ETHERNET:
278 case SSB_DEV_ETHERNET_GBIT:
279 @@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
280 set_irq(dev, irq++);
281 break;
282 }
283 + /* fallthrough */
284 + case SSB_DEV_EXTIF:
285 + set_irq(dev, 0);
286 + break;
287 }
288 }
289 ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
290 --- a/drivers/ssb/driver_pcicore.c
291 +++ b/drivers/ssb/driver_pcicore.c
292 @@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
293 .pci_ops = &ssb_pcicore_pciops,
294 .io_resource = &ssb_pcicore_io_resource,
295 .mem_resource = &ssb_pcicore_mem_resource,
296 - .mem_offset = 0x24000000,
297 };
298
299 -static u32 ssb_pcicore_pcibus_iobase = 0x100;
300 -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
301 -
302 /* This function is called when doing a pci_enable_device().
303 * We must first check if the device is a device on the PCI-core bridge. */
304 int ssb_pcicore_plat_dev_init(struct pci_dev *d)
305 {
306 - struct resource *res;
307 - int pos, size;
308 - u32 *base;
309 -
310 if (d->bus->ops != &ssb_pcicore_pciops) {
311 /* This is not a device on the PCI-core bridge. */
312 return -ENODEV;
313 @@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
314 ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
315 pci_name(d));
316
317 - /* Fix up resource bases */
318 - for (pos = 0; pos < 6; pos++) {
319 - res = &d->resource[pos];
320 - if (res->flags & IORESOURCE_IO)
321 - base = &ssb_pcicore_pcibus_iobase;
322 - else
323 - base = &ssb_pcicore_pcibus_membase;
324 - res->flags |= IORESOURCE_PCI_FIXED;
325 - if (res->end) {
326 - size = res->end - res->start + 1;
327 - if (*base & (size - 1))
328 - *base = (*base + size) & ~(size - 1);
329 - res->start = *base;
330 - res->end = res->start + size - 1;
331 - *base += size;
332 - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
333 - }
334 - /* Fix up PCI bridge BAR0 only */
335 - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
336 - break;
337 - }
338 /* Fix up interrupt lines */
339 d->irq = ssb_mips_irq(extpci_core->dev) + 2;
340 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
341 @@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
342 might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
343
344 /* Enable interrupts for this device. */
345 - if (bus->host_pci &&
346 - ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
347 + if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
348 u32 coremask;
349
350 /* Calculate the "coremask" for the device. */
351 coremask = (1 << dev->core_index);
352
353 + SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
354 err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
355 if (err)
356 goto out;
357 --- a/drivers/ssb/main.c
358 +++ b/drivers/ssb/main.c
359 @@ -17,6 +17,8 @@
360 #include <linux/ssb/ssb_driver_gige.h>
361 #include <linux/dma-mapping.h>
362 #include <linux/pci.h>
363 +#include <linux/mmc/sdio_func.h>
364 +#include <linux/slab.h>
365
366 #include <pcmcia/cs_types.h>
367 #include <pcmcia/cs.h>
368 @@ -88,6 +90,25 @@ found:
369 }
370 #endif /* CONFIG_SSB_PCMCIAHOST */
371
372 +#ifdef CONFIG_SSB_SDIOHOST
373 +struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
374 +{
375 + struct ssb_bus *bus;
376 +
377 + ssb_buses_lock();
378 + list_for_each_entry(bus, &buses, list) {
379 + if (bus->bustype == SSB_BUSTYPE_SDIO &&
380 + bus->host_sdio == func)
381 + goto found;
382 + }
383 + bus = NULL;
384 +found:
385 + ssb_buses_unlock();
386 +
387 + return bus;
388 +}
389 +#endif /* CONFIG_SSB_SDIOHOST */
390 +
391 int ssb_for_each_bus_call(unsigned long data,
392 int (*func)(struct ssb_bus *bus, unsigned long data))
393 {
394 @@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de
395 put_device(dev->dev);
396 }
397
398 +static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
399 +{
400 + if (drv)
401 + get_driver(&drv->drv);
402 + return drv;
403 +}
404 +
405 +static inline void ssb_driver_put(struct ssb_driver *drv)
406 +{
407 + if (drv)
408 + put_driver(&drv->drv);
409 +}
410 +
411 static int ssb_device_resume(struct device *dev)
412 {
413 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
414 @@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
415 EXPORT_SYMBOL(ssb_bus_suspend);
416
417 #ifdef CONFIG_SSB_SPROM
418 -int ssb_devices_freeze(struct ssb_bus *bus)
419 +/** ssb_devices_freeze - Freeze all devices on the bus.
420 + *
421 + * After freezing no device driver will be handling a device
422 + * on this bus anymore. ssb_devices_thaw() must be called after
423 + * a successful freeze to reactivate the devices.
424 + *
425 + * @bus: The bus.
426 + * @ctx: Context structure. Pass this to ssb_devices_thaw().
427 + */
428 +int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
429 {
430 - struct ssb_device *dev;
431 - struct ssb_driver *drv;
432 - int err = 0;
433 - int i;
434 - pm_message_t state = PMSG_FREEZE;
435 + struct ssb_device *sdev;
436 + struct ssb_driver *sdrv;
437 + unsigned int i;
438 +
439 + memset(ctx, 0, sizeof(*ctx));
440 + ctx->bus = bus;
441 + SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
442
443 - /* First check that we are capable to freeze all devices. */
444 for (i = 0; i < bus->nr_devices; i++) {
445 - dev = &(bus->devices[i]);
446 - if (!dev->dev ||
447 - !dev->dev->driver ||
448 - !device_is_registered(dev->dev))
449 - continue;
450 - drv = drv_to_ssb_drv(dev->dev->driver);
451 - if (!drv)
452 + sdev = ssb_device_get(&bus->devices[i]);
453 +
454 + if (!sdev->dev || !sdev->dev->driver ||
455 + !device_is_registered(sdev->dev)) {
456 + ssb_device_put(sdev);
457 continue;
458 - if (!drv->suspend) {
459 - /* Nope, can't suspend this one. */
460 - return -EOPNOTSUPP;
461 }
462 - }
463 - /* Now suspend all devices */
464 - for (i = 0; i < bus->nr_devices; i++) {
465 - dev = &(bus->devices[i]);
466 - if (!dev->dev ||
467 - !dev->dev->driver ||
468 - !device_is_registered(dev->dev))
469 + sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
470 + if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
471 + ssb_device_put(sdev);
472 continue;
473 - drv = drv_to_ssb_drv(dev->dev->driver);
474 - if (!drv)
475 - continue;
476 - err = drv->suspend(dev, state);
477 - if (err) {
478 - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
479 - dev_name(dev->dev));
480 - goto err_unwind;
481 }
482 + sdrv->remove(sdev);
483 + ctx->device_frozen[i] = 1;
484 }
485
486 return 0;
487 -err_unwind:
488 - for (i--; i >= 0; i--) {
489 - dev = &(bus->devices[i]);
490 - if (!dev->dev ||
491 - !dev->dev->driver ||
492 - !device_is_registered(dev->dev))
493 - continue;
494 - drv = drv_to_ssb_drv(dev->dev->driver);
495 - if (!drv)
496 - continue;
497 - if (drv->resume)
498 - drv->resume(dev);
499 - }
500 - return err;
501 }
502
503 -int ssb_devices_thaw(struct ssb_bus *bus)
504 +/** ssb_devices_thaw - Unfreeze all devices on the bus.
505 + *
506 + * This will re-attach the device drivers and re-init the devices.
507 + *
508 + * @ctx: The context structure from ssb_devices_freeze()
509 + */
510 +int ssb_devices_thaw(struct ssb_freeze_context *ctx)
511 {
512 - struct ssb_device *dev;
513 - struct ssb_driver *drv;
514 - int err;
515 - int i;
516 + struct ssb_bus *bus = ctx->bus;
517 + struct ssb_device *sdev;
518 + struct ssb_driver *sdrv;
519 + unsigned int i;
520 + int err, result = 0;
521
522 for (i = 0; i < bus->nr_devices; i++) {
523 - dev = &(bus->devices[i]);
524 - if (!dev->dev ||
525 - !dev->dev->driver ||
526 - !device_is_registered(dev->dev))
527 + if (!ctx->device_frozen[i])
528 continue;
529 - drv = drv_to_ssb_drv(dev->dev->driver);
530 - if (!drv)
531 + sdev = &bus->devices[i];
532 +
533 + if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
534 continue;
535 - if (SSB_WARN_ON(!drv->resume))
536 + sdrv = drv_to_ssb_drv(sdev->dev->driver);
537 + if (SSB_WARN_ON(!sdrv || !sdrv->probe))
538 continue;
539 - err = drv->resume(dev);
540 +
541 + err = sdrv->probe(sdev, &sdev->id);
542 if (err) {
543 ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
544 - dev_name(dev->dev));
545 + dev_name(sdev->dev));
546 + result = err;
547 }
548 + ssb_driver_put(sdrv);
549 + ssb_device_put(sdev);
550 }
551
552 - return 0;
553 + return result;
554 }
555 #endif /* CONFIG_SSB_SPROM */
556
557 @@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi
558 ssb_dev->id.revision);
559 }
560
561 +#define ssb_config_attr(attrib, field, format_string) \
562 +static ssize_t \
563 +attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
564 +{ \
565 + return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
566 +}
567 +
568 +ssb_config_attr(core_num, core_index, "%u\n")
569 +ssb_config_attr(coreid, id.coreid, "0x%04x\n")
570 +ssb_config_attr(vendor, id.vendor, "0x%04x\n")
571 +ssb_config_attr(revision, id.revision, "%u\n")
572 +ssb_config_attr(irq, irq, "%u\n")
573 +static ssize_t
574 +name_show(struct device *dev, struct device_attribute *attr, char *buf)
575 +{
576 + return sprintf(buf, "%s\n",
577 + ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
578 +}
579 +
580 +static struct device_attribute ssb_device_attrs[] = {
581 + __ATTR_RO(name),
582 + __ATTR_RO(core_num),
583 + __ATTR_RO(coreid),
584 + __ATTR_RO(vendor),
585 + __ATTR_RO(revision),
586 + __ATTR_RO(irq),
587 + __ATTR_NULL,
588 +};
589 +
590 static struct bus_type ssb_bustype = {
591 .name = "ssb",
592 .match = ssb_bus_match,
593 @@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = {
594 .suspend = ssb_device_suspend,
595 .resume = ssb_device_resume,
596 .uevent = ssb_device_uevent,
597 + .dev_attrs = ssb_device_attrs,
598 };
599
600 static void ssb_buses_lock(void)
601 @@ -461,6 +516,7 @@ static int ssb_devices_register(struct s
602 #ifdef CONFIG_SSB_PCIHOST
603 sdev->irq = bus->host_pci->irq;
604 dev->parent = &bus->host_pci->dev;
605 + sdev->dma_dev = dev->parent;
606 #endif
607 break;
608 case SSB_BUSTYPE_PCMCIA:
609 @@ -469,8 +525,14 @@ static int ssb_devices_register(struct s
610 dev->parent = &bus->host_pcmcia->dev;
611 #endif
612 break;
613 + case SSB_BUSTYPE_SDIO:
614 +#ifdef CONFIG_SSB_SDIOHOST
615 + dev->parent = &bus->host_sdio->dev;
616 +#endif
617 + break;
618 case SSB_BUSTYPE_SSB:
619 dev->dma_mask = &dev->coherent_dma_mask;
620 + sdev->dma_dev = dev;
621 break;
622 }
623
624 @@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b
625 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
626 if (err)
627 goto out;
628 +
629 + /* Init SDIO-host device (if any), before the scan */
630 + err = ssb_sdio_init(bus);
631 + if (err)
632 + goto err_disable_xtal;
633 +
634 ssb_buses_lock();
635 bus->busnumber = next_busnumber;
636 /* Scan for devices (cores) */
637 err = ssb_bus_scan(bus, baseaddr);
638 if (err)
639 - goto err_disable_xtal;
640 + goto err_sdio_exit;
641
642 /* Init PCI-host device (if any) */
643 err = ssb_pci_init(bus);
644 @@ -776,6 +844,8 @@ err_pci_exit:
645 ssb_pci_exit(bus);
646 err_unmap:
647 ssb_iounmap(bus);
648 +err_sdio_exit:
649 + ssb_sdio_exit(bus);
650 err_disable_xtal:
651 ssb_buses_unlock();
652 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
653 @@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b
654 if (!err) {
655 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
656 "PCI device %s\n", dev_name(&host_pci->dev));
657 + } else {
658 + ssb_printk(KERN_ERR PFX "Failed to register PCI version"
659 + " of SSB with error %d\n", err);
660 }
661
662 return err;
663 @@ -825,6 +898,28 @@ int ssb_bus_pcmciabus_register(struct ss
664 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
665 #endif /* CONFIG_SSB_PCMCIAHOST */
666
667 +#ifdef CONFIG_SSB_SDIOHOST
668 +int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
669 + unsigned int quirks)
670 +{
671 + int err;
672 +
673 + bus->bustype = SSB_BUSTYPE_SDIO;
674 + bus->host_sdio = func;
675 + bus->ops = &ssb_sdio_ops;
676 + bus->quirks = quirks;
677 +
678 + err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
679 + if (!err) {
680 + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
681 + "SDIO device %s\n", sdio_func_id(func));
682 + }
683 +
684 + return err;
685 +}
686 +EXPORT_SYMBOL(ssb_bus_sdiobus_register);
687 +#endif /* CONFIG_SSB_PCMCIAHOST */
688 +
689 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
690 unsigned long baseaddr,
691 ssb_invariants_func_t get_invariants)
692 @@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device
693 }
694 EXPORT_SYMBOL(ssb_device_enable);
695
696 -/* Wait for a bit in a register to get set or unset.
697 +/* Wait for bitmask in a register to get set or cleared.
698 * timeout is in units of ten-microseconds */
699 -static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
700 - int timeout, int set)
701 +static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
702 + int timeout, int set)
703 {
704 int i;
705 u32 val;
706 @@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic
707 for (i = 0; i < timeout; i++) {
708 val = ssb_read32(dev, reg);
709 if (set) {
710 - if (val & bitmask)
711 + if ((val & bitmask) == bitmask)
712 return 0;
713 } else {
714 if (!(val & bitmask))
715 @@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic
716
717 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
718 {
719 - u32 reject;
720 + u32 reject, val;
721
722 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
723 return;
724
725 reject = ssb_tmslow_reject_bitmask(dev);
726 - ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
727 - ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
728 - ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
729 - ssb_write32(dev, SSB_TMSLOW,
730 - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
731 - reject | SSB_TMSLOW_RESET |
732 - core_specific_flags);
733 - ssb_flush_tmslow(dev);
734 +
735 + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
736 + ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
737 + ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
738 + ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
739 +
740 + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
741 + val = ssb_read32(dev, SSB_IMSTATE);
742 + val |= SSB_IMSTATE_REJECT;
743 + ssb_write32(dev, SSB_IMSTATE, val);
744 + ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
745 + 0);
746 + }
747 +
748 + ssb_write32(dev, SSB_TMSLOW,
749 + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
750 + reject | SSB_TMSLOW_RESET |
751 + core_specific_flags);
752 + ssb_flush_tmslow(dev);
753 +
754 + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
755 + val = ssb_read32(dev, SSB_IMSTATE);
756 + val &= ~SSB_IMSTATE_REJECT;
757 + ssb_write32(dev, SSB_IMSTATE, val);
758 + }
759 + }
760
761 ssb_write32(dev, SSB_TMSLOW,
762 reject | SSB_TMSLOW_RESET |
763 @@ -1358,8 +1471,10 @@ static int __init ssb_modinit(void)
764 ssb_buses_lock();
765 err = ssb_attach_queued_buses();
766 ssb_buses_unlock();
767 - if (err)
768 + if (err) {
769 bus_unregister(&ssb_bustype);
770 + goto out;
771 + }
772
773 err = b43_pci_ssb_bridge_init();
774 if (err) {
775 @@ -1375,7 +1490,7 @@ static int __init ssb_modinit(void)
776 /* don't fail SSB init because of this */
777 err = 0;
778 }
779 -
780 +out:
781 return err;
782 }
783 /* ssb must be initialized after PCI but before the ssb drivers.
784 --- a/drivers/ssb/pci.c
785 +++ b/drivers/ssb/pci.c
786 @@ -17,6 +17,7 @@
787
788 #include <linux/ssb/ssb.h>
789 #include <linux/ssb/ssb_regs.h>
790 +#include <linux/slab.h>
791 #include <linux/pci.h>
792 #include <linux/delay.h>
793
794 @@ -167,10 +168,16 @@ err_pci:
795 }
796
797 /* Get the word-offset for a SSB_SPROM_XXX define. */
798 -#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
799 +#define SPOFF(offset) ((offset) / sizeof(u16))
800 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
801 -#define SPEX(_outvar, _offset, _mask, _shift) \
802 +#define SPEX16(_outvar, _offset, _mask, _shift) \
803 out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
804 +#define SPEX32(_outvar, _offset, _mask, _shift) \
805 + out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
806 + in[SPOFF(_offset)]) & (_mask)) >> (_shift))
807 +#define SPEX(_outvar, _offset, _mask, _shift) \
808 + SPEX16(_outvar, _offset, _mask, _shift)
809 +
810
811 static inline u8 ssb_crc8(u8 crc, u8 data)
812 {
813 @@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
814 int i;
815
816 for (i = 0; i < bus->sprom_size; i++)
817 - sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
818 + sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
819
820 return 0;
821 }
822 @@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
823 ssb_printk("75%%");
824 else if (i % 2)
825 ssb_printk(".");
826 - writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
827 + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
828 mmiowb();
829 msleep(20);
830 }
831 @@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
832 out->antenna_gain.ghz5.a3 = gain;
833 }
834
835 +/* Revs 4 5 and 8 have partially shared layout */
836 +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
837 +{
838 + SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
839 + SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
840 + SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
841 + SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
842 + SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
843 + SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
844 + SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
845 + SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
846 +
847 + SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
848 + SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
849 + SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
850 + SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
851 + SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
852 + SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
853 + SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
854 + SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
855 +
856 + SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
857 + SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
858 + SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
859 + SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
860 + SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
861 + SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
862 + SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
863 + SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
864 +
865 + SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
866 + SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
867 + SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
868 + SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
869 + SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
870 + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
871 + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
872 + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
873 +}
874 +
875 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
876 {
877 int i;
878 @@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
879 SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
880 SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
881 SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
882 + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
883 + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
884 } else {
885 SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
886 SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
887 SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
888 + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
889 + SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
890 }
891 SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
892 SSB_SPROM4_ANTAVAIL_A_SHIFT);
893 @@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
894 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
895 sizeof(out->antenna_gain.ghz5));
896
897 + sprom_extract_r458(out, in);
898 +
899 /* TODO - get remaining rev 4 stuff needed */
900 }
901
902 @@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
903
904 /* extract the MAC address */
905 for (i = 0; i < 3; i++) {
906 - v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
907 + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
908 *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
909 }
910 SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
911 SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
912 SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
913 + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
914 + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
915 SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
916 SSB_SPROM8_ANTAVAIL_A_SHIFT);
917 SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
918 @@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
919 SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
920 SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
921 SSB_SPROM8_ITSSI_A_SHIFT);
922 + SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
923 + SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
924 + SSB_SPROM8_MAXP_AL_SHIFT);
925 SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
926 SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
927 SSB_SPROM8_GPIOA_P1_SHIFT);
928 SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
929 SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
930 SSB_SPROM8_GPIOB_P3_SHIFT);
931 + SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
932 + SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
933 + SSB_SPROM8_TRI5G_SHIFT);
934 + SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
935 + SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
936 + SSB_SPROM8_TRI5GH_SHIFT);
937 + SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
938 + SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
939 + SSB_SPROM8_RXPO5G_SHIFT);
940 + SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
941 + SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
942 + SSB_SPROM8_RSSISMC2G_SHIFT);
943 + SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
944 + SSB_SPROM8_RSSISAV2G_SHIFT);
945 + SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
946 + SSB_SPROM8_BXA2G_SHIFT);
947 + SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
948 + SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
949 + SSB_SPROM8_RSSISMC5G_SHIFT);
950 + SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
951 + SSB_SPROM8_RSSISAV5G_SHIFT);
952 + SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
953 + SSB_SPROM8_BXA5G_SHIFT);
954 + SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
955 + SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
956 + SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
957 + SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
958 + SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
959 + SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
960 + SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
961 + SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
962 + SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
963 + SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
964 + SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
965 + SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
966 + SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
967 + SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
968 + SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
969 + SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
970 + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
971
972 /* Extract the antenna gain values. */
973 SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
974 @@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_
975 memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
976 sizeof(out->antenna_gain.ghz5));
977
978 + sprom_extract_r458(out, in);
979 +
980 /* TODO - get remaining rev 8 stuff needed */
981 }
982
983 @@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus
984 ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
985 memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
986 memset(out->et1mac, 0xFF, 6);
987 +
988 if ((bus->chip_id & 0xFF00) == 0x4400) {
989 /* Workaround: The BCM44XX chip has a stupid revision
990 * number stored in the SPROM.
991 * Always extract r1. */
992 out->revision = 1;
993 + ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
994 + }
995 +
996 + switch (out->revision) {
997 + case 1:
998 + case 2:
999 + case 3:
1000 sprom_extract_r123(out, in);
1001 - } else if (bus->chip_id == 0x4321) {
1002 - /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
1003 - out->revision = 4;
1004 + break;
1005 + case 4:
1006 + case 5:
1007 sprom_extract_r45(out, in);
1008 - } else {
1009 - switch (out->revision) {
1010 - case 1:
1011 - case 2:
1012 - case 3:
1013 - sprom_extract_r123(out, in);
1014 - break;
1015 - case 4:
1016 - case 5:
1017 - sprom_extract_r45(out, in);
1018 - break;
1019 - case 8:
1020 - sprom_extract_r8(out, in);
1021 - break;
1022 - default:
1023 - ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1024 - " revision %d detected. Will extract"
1025 - " v1\n", out->revision);
1026 - sprom_extract_r123(out, in);
1027 - }
1028 + break;
1029 + case 8:
1030 + sprom_extract_r8(out, in);
1031 + break;
1032 + default:
1033 + ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1034 + " revision %d detected. Will extract"
1035 + " v1\n", out->revision);
1036 + out->revision = 1;
1037 + sprom_extract_r123(out, in);
1038 }
1039
1040 if (out->boardflags_lo == 0xFFFF)
1041 @@ -565,12 +663,34 @@ static int ssb_pci_sprom_get(struct ssb_
1042 struct ssb_sprom *sprom)
1043 {
1044 const struct ssb_sprom *fallback;
1045 - int err = -ENOMEM;
1046 + int err;
1047 u16 *buf;
1048
1049 + if (!ssb_is_sprom_available(bus)) {
1050 + ssb_printk(KERN_ERR PFX "No SPROM available!\n");
1051 + return -ENODEV;
1052 + }
1053 + if (bus->chipco.dev) { /* can be unavailible! */
1054 + /*
1055 + * get SPROM offset: SSB_SPROM_BASE1 except for
1056 + * chipcommon rev >= 31 or chip ID is 0x4312 and
1057 + * chipcommon status & 3 == 2
1058 + */
1059 + if (bus->chipco.dev->id.revision >= 31)
1060 + bus->sprom_offset = SSB_SPROM_BASE31;
1061 + else if (bus->chip_id == 0x4312 &&
1062 + (bus->chipco.status & 0x03) == 2)
1063 + bus->sprom_offset = SSB_SPROM_BASE31;
1064 + else
1065 + bus->sprom_offset = SSB_SPROM_BASE1;
1066 + } else {
1067 + bus->sprom_offset = SSB_SPROM_BASE1;
1068 + }
1069 + ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
1070 +
1071 buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
1072 if (!buf)
1073 - goto out;
1074 + return -ENOMEM;
1075 bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
1076 sprom_do_read(bus, buf);
1077 err = sprom_check_crc(buf, bus->sprom_size);
1078 @@ -580,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_
1079 buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
1080 GFP_KERNEL);
1081 if (!buf)
1082 - goto out;
1083 + return -ENOMEM;
1084 bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
1085 sprom_do_read(bus, buf);
1086 err = sprom_check_crc(buf, bus->sprom_size);
1087 @@ -602,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_
1088
1089 out_free:
1090 kfree(buf);
1091 -out:
1092 return err;
1093 }
1094
1095 --- a/drivers/ssb/pcihost_wrapper.c
1096 +++ b/drivers/ssb/pcihost_wrapper.c
1097 @@ -12,6 +12,7 @@
1098 */
1099
1100 #include <linux/pci.h>
1101 +#include <linux/slab.h>
1102 #include <linux/ssb/ssb.h>
1103
1104
1105 @@ -58,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_
1106 struct ssb_bus *ssb;
1107 int err = -ENOMEM;
1108 const char *name;
1109 + u32 val;
1110
1111 ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
1112 if (!ssb)
1113 @@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
1114 goto err_pci_disable;
1115 pci_set_master(dev);
1116
1117 + /* Disable the RETRY_TIMEOUT register (0x41) to keep
1118 + * PCI Tx retries from interfering with C3 CPU state */
1119 + pci_read_config_dword(dev, 0x40, &val);
1120 + if ((val & 0x0000ff00) != 0)
1121 + pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
1122 +
1123 err = ssb_bus_pcibus_register(ssb, dev);
1124 if (err)
1125 goto err_pci_release_regions;
1126 --- a/drivers/ssb/pcmcia.c
1127 +++ b/drivers/ssb/pcmcia.c
1128 @@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
1129 } \
1130 } while (0)
1131
1132 -int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
1133 - struct ssb_init_invariants *iv)
1134 +static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
1135 + tuple_t *tuple,
1136 + void *priv)
1137 {
1138 - tuple_t tuple;
1139 - int res;
1140 - unsigned char buf[32];
1141 + struct ssb_sprom *sprom = priv;
1142 +
1143 + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
1144 + return -EINVAL;
1145 + if (tuple->TupleDataLen != ETH_ALEN + 2)
1146 + return -EINVAL;
1147 + if (tuple->TupleData[1] != ETH_ALEN)
1148 + return -EINVAL;
1149 + memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
1150 + return 0;
1151 +};
1152 +
1153 +static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
1154 + tuple_t *tuple,
1155 + void *priv)
1156 +{
1157 + struct ssb_init_invariants *iv = priv;
1158 struct ssb_sprom *sprom = &iv->sprom;
1159 struct ssb_boardinfo *bi = &iv->boardinfo;
1160 const char *error_description;
1161
1162 + GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
1163 + switch (tuple->TupleData[0]) {
1164 + case SSB_PCMCIA_CIS_ID:
1165 + GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
1166 + (tuple->TupleDataLen != 7),
1167 + "id tpl size");
1168 + bi->vendor = tuple->TupleData[1] |
1169 + ((u16)tuple->TupleData[2] << 8);
1170 + break;
1171 + case SSB_PCMCIA_CIS_BOARDREV:
1172 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1173 + "boardrev tpl size");
1174 + sprom->board_rev = tuple->TupleData[1];
1175 + break;
1176 + case SSB_PCMCIA_CIS_PA:
1177 + GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
1178 + (tuple->TupleDataLen != 10),
1179 + "pa tpl size");
1180 + sprom->pa0b0 = tuple->TupleData[1] |
1181 + ((u16)tuple->TupleData[2] << 8);
1182 + sprom->pa0b1 = tuple->TupleData[3] |
1183 + ((u16)tuple->TupleData[4] << 8);
1184 + sprom->pa0b2 = tuple->TupleData[5] |
1185 + ((u16)tuple->TupleData[6] << 8);
1186 + sprom->itssi_a = tuple->TupleData[7];
1187 + sprom->itssi_bg = tuple->TupleData[7];
1188 + sprom->maxpwr_a = tuple->TupleData[8];
1189 + sprom->maxpwr_bg = tuple->TupleData[8];
1190 + break;
1191 + case SSB_PCMCIA_CIS_OEMNAME:
1192 + /* We ignore this. */
1193 + break;
1194 + case SSB_PCMCIA_CIS_CCODE:
1195 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1196 + "ccode tpl size");
1197 + sprom->country_code = tuple->TupleData[1];
1198 + break;
1199 + case SSB_PCMCIA_CIS_ANTENNA:
1200 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1201 + "ant tpl size");
1202 + sprom->ant_available_a = tuple->TupleData[1];
1203 + sprom->ant_available_bg = tuple->TupleData[1];
1204 + break;
1205 + case SSB_PCMCIA_CIS_ANTGAIN:
1206 + GOTO_ERROR_ON(tuple->TupleDataLen != 2,
1207 + "antg tpl size");
1208 + sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
1209 + sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
1210 + sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
1211 + sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
1212 + sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
1213 + sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
1214 + sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
1215 + sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
1216 + break;
1217 + case SSB_PCMCIA_CIS_BFLAGS:
1218 + GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
1219 + (tuple->TupleDataLen != 5),
1220 + "bfl tpl size");
1221 + sprom->boardflags_lo = tuple->TupleData[1] |
1222 + ((u16)tuple->TupleData[2] << 8);
1223 + break;
1224 + case SSB_PCMCIA_CIS_LEDS:
1225 + GOTO_ERROR_ON(tuple->TupleDataLen != 5,
1226 + "leds tpl size");
1227 + sprom->gpio0 = tuple->TupleData[1];
1228 + sprom->gpio1 = tuple->TupleData[2];
1229 + sprom->gpio2 = tuple->TupleData[3];
1230 + sprom->gpio3 = tuple->TupleData[4];
1231 + break;
1232 + }
1233 + return -ENOSPC; /* continue with next entry */
1234 +
1235 +error:
1236 + ssb_printk(KERN_ERR PFX
1237 + "PCMCIA: Failed to fetch device invariants: %s\n",
1238 + error_description);
1239 + return -ENODEV;
1240 +}
1241 +
1242 +
1243 +int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
1244 + struct ssb_init_invariants *iv)
1245 +{
1246 + struct ssb_sprom *sprom = &iv->sprom;
1247 + int res;
1248 +
1249 memset(sprom, 0xFF, sizeof(*sprom));
1250 sprom->revision = 1;
1251 sprom->boardflags_lo = 0;
1252 sprom->boardflags_hi = 0;
1253
1254 /* First fetch the MAC address. */
1255 - memset(&tuple, 0, sizeof(tuple));
1256 - tuple.DesiredTuple = CISTPL_FUNCE;
1257 - tuple.TupleData = buf;
1258 - tuple.TupleDataMax = sizeof(buf);
1259 - res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
1260 - GOTO_ERROR_ON(res != 0, "MAC first tpl");
1261 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1262 - GOTO_ERROR_ON(res != 0, "MAC first tpl data");
1263 - while (1) {
1264 - GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
1265 - if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
1266 - break;
1267 - res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
1268 - GOTO_ERROR_ON(res != 0, "MAC next tpl");
1269 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1270 - GOTO_ERROR_ON(res != 0, "MAC next tpl data");
1271 + res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
1272 + ssb_pcmcia_get_mac, sprom);
1273 + if (res != 0) {
1274 + ssb_printk(KERN_ERR PFX
1275 + "PCMCIA: Failed to fetch MAC address\n");
1276 + return -ENODEV;
1277 }
1278 - GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
1279 - memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
1280
1281 /* Fetch the vendor specific tuples. */
1282 - memset(&tuple, 0, sizeof(tuple));
1283 - tuple.DesiredTuple = SSB_PCMCIA_CIS;
1284 - tuple.TupleData = buf;
1285 - tuple.TupleDataMax = sizeof(buf);
1286 - res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
1287 - GOTO_ERROR_ON(res != 0, "VEN first tpl");
1288 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1289 - GOTO_ERROR_ON(res != 0, "VEN first tpl data");
1290 - while (1) {
1291 - GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
1292 - switch (tuple.TupleData[0]) {
1293 - case SSB_PCMCIA_CIS_ID:
1294 - GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
1295 - (tuple.TupleDataLen != 7),
1296 - "id tpl size");
1297 - bi->vendor = tuple.TupleData[1] |
1298 - ((u16)tuple.TupleData[2] << 8);
1299 - break;
1300 - case SSB_PCMCIA_CIS_BOARDREV:
1301 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1302 - "boardrev tpl size");
1303 - sprom->board_rev = tuple.TupleData[1];
1304 - break;
1305 - case SSB_PCMCIA_CIS_PA:
1306 - GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
1307 - (tuple.TupleDataLen != 10),
1308 - "pa tpl size");
1309 - sprom->pa0b0 = tuple.TupleData[1] |
1310 - ((u16)tuple.TupleData[2] << 8);
1311 - sprom->pa0b1 = tuple.TupleData[3] |
1312 - ((u16)tuple.TupleData[4] << 8);
1313 - sprom->pa0b2 = tuple.TupleData[5] |
1314 - ((u16)tuple.TupleData[6] << 8);
1315 - sprom->itssi_a = tuple.TupleData[7];
1316 - sprom->itssi_bg = tuple.TupleData[7];
1317 - sprom->maxpwr_a = tuple.TupleData[8];
1318 - sprom->maxpwr_bg = tuple.TupleData[8];
1319 - break;
1320 - case SSB_PCMCIA_CIS_OEMNAME:
1321 - /* We ignore this. */
1322 - break;
1323 - case SSB_PCMCIA_CIS_CCODE:
1324 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1325 - "ccode tpl size");
1326 - sprom->country_code = tuple.TupleData[1];
1327 - break;
1328 - case SSB_PCMCIA_CIS_ANTENNA:
1329 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1330 - "ant tpl size");
1331 - sprom->ant_available_a = tuple.TupleData[1];
1332 - sprom->ant_available_bg = tuple.TupleData[1];
1333 - break;
1334 - case SSB_PCMCIA_CIS_ANTGAIN:
1335 - GOTO_ERROR_ON(tuple.TupleDataLen != 2,
1336 - "antg tpl size");
1337 - sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
1338 - sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
1339 - sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
1340 - sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
1341 - sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
1342 - sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
1343 - sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
1344 - sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
1345 - break;
1346 - case SSB_PCMCIA_CIS_BFLAGS:
1347 - GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
1348 - (tuple.TupleDataLen != 5),
1349 - "bfl tpl size");
1350 - sprom->boardflags_lo = tuple.TupleData[1] |
1351 - ((u16)tuple.TupleData[2] << 8);
1352 - break;
1353 - case SSB_PCMCIA_CIS_LEDS:
1354 - GOTO_ERROR_ON(tuple.TupleDataLen != 5,
1355 - "leds tpl size");
1356 - sprom->gpio0 = tuple.TupleData[1];
1357 - sprom->gpio1 = tuple.TupleData[2];
1358 - sprom->gpio2 = tuple.TupleData[3];
1359 - sprom->gpio3 = tuple.TupleData[4];
1360 - break;
1361 - }
1362 - res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
1363 - if (res == -ENOSPC)
1364 - break;
1365 - GOTO_ERROR_ON(res != 0, "VEN next tpl");
1366 - res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
1367 - GOTO_ERROR_ON(res != 0, "VEN next tpl data");
1368 - }
1369 + res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
1370 + ssb_pcmcia_do_get_invariants, iv);
1371 + if ((res == 0) || (res == -ENOSPC))
1372 + return 0;
1373
1374 - return 0;
1375 -error:
1376 ssb_printk(KERN_ERR PFX
1377 - "PCMCIA: Failed to fetch device invariants: %s\n",
1378 - error_description);
1379 + "PCMCIA: Failed to fetch device invariants\n");
1380 return -ENODEV;
1381 }
1382
1383 --- a/drivers/ssb/scan.c
1384 +++ b/drivers/ssb/scan.c
1385 @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
1386 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
1387 u16 offset)
1388 {
1389 + u32 lo, hi;
1390 +
1391 switch (bus->bustype) {
1392 case SSB_BUSTYPE_SSB:
1393 offset += current_coreidx * SSB_CORE_SIZE;
1394 @@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
1395 offset -= 0x800;
1396 } else
1397 ssb_pcmcia_switch_segment(bus, 0);
1398 - break;
1399 + lo = readw(bus->mmio + offset);
1400 + hi = readw(bus->mmio + offset + 2);
1401 + return lo | (hi << 16);
1402 + case SSB_BUSTYPE_SDIO:
1403 + offset += current_coreidx * SSB_CORE_SIZE;
1404 + return ssb_sdio_scan_read32(bus, offset);
1405 }
1406 return readl(bus->mmio + offset);
1407 }
1408 @@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
1409 return ssb_pci_switch_coreidx(bus, coreidx);
1410 case SSB_BUSTYPE_PCMCIA:
1411 return ssb_pcmcia_switch_coreidx(bus, coreidx);
1412 + case SSB_BUSTYPE_SDIO:
1413 + return ssb_sdio_scan_switch_coreidx(bus, coreidx);
1414 }
1415 return 0;
1416 }
1417 @@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
1418 SSB_BUG_ON(1); /* Can't reach this code. */
1419 #endif
1420 break;
1421 + case SSB_BUSTYPE_SDIO:
1422 + break;
1423 }
1424 bus->mmio = NULL;
1425 bus->mapped_device = NULL;
1426 @@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
1427 SSB_BUG_ON(1); /* Can't reach this code. */
1428 #endif
1429 break;
1430 + case SSB_BUSTYPE_SDIO:
1431 + /* Nothing to ioremap in the SDIO case, just fake it */
1432 + mmio = (void __iomem *)baseaddr;
1433 + break;
1434 }
1435
1436 return mmio;
1437 @@ -339,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
1438 dev->bus = bus;
1439 dev->ops = bus->ops;
1440
1441 - ssb_dprintk(KERN_INFO PFX
1442 + printk(KERN_DEBUG PFX
1443 "Core %d found: %s "
1444 "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
1445 i, ssb_core_name(dev->id.coreid),
1446 @@ -407,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
1447 bus->pcicore.dev = dev;
1448 #endif /* CONFIG_SSB_DRIVER_PCICORE */
1449 break;
1450 + case SSB_DEV_ETHERNET:
1451 + if (bus->bustype == SSB_BUSTYPE_PCI) {
1452 + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
1453 + (bus->host_pci->device & 0xFF00) == 0x4300) {
1454 + /* This is a dangling ethernet core on a
1455 + * wireless device. Ignore it. */
1456 + continue;
1457 + }
1458 + }
1459 + break;
1460 default:
1461 break;
1462 }
1463 --- /dev/null
1464 +++ b/drivers/ssb/sdio.c
1465 @@ -0,0 +1,610 @@
1466 +/*
1467 + * Sonics Silicon Backplane
1468 + * SDIO-Hostbus related functions
1469 + *
1470 + * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
1471 + *
1472 + * Based on drivers/ssb/pcmcia.c
1473 + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
1474 + * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
1475 + *
1476 + * Licensed under the GNU/GPL. See COPYING for details.
1477 + *
1478 + */
1479 +
1480 +#include <linux/ssb/ssb.h>
1481 +#include <linux/delay.h>
1482 +#include <linux/io.h>
1483 +#include <linux/etherdevice.h>
1484 +#include <linux/mmc/sdio_func.h>
1485 +
1486 +#include "ssb_private.h"
1487 +
1488 +/* Define the following to 1 to enable a printk on each coreswitch. */
1489 +#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
1490 +
1491 +
1492 +/* Hardware invariants CIS tuples */
1493 +#define SSB_SDIO_CIS 0x80
1494 +#define SSB_SDIO_CIS_SROMREV 0x00
1495 +#define SSB_SDIO_CIS_ID 0x01
1496 +#define SSB_SDIO_CIS_BOARDREV 0x02
1497 +#define SSB_SDIO_CIS_PA 0x03
1498 +#define SSB_SDIO_CIS_PA_PA0B0_LO 0
1499 +#define SSB_SDIO_CIS_PA_PA0B0_HI 1
1500 +#define SSB_SDIO_CIS_PA_PA0B1_LO 2
1501 +#define SSB_SDIO_CIS_PA_PA0B1_HI 3
1502 +#define SSB_SDIO_CIS_PA_PA0B2_LO 4
1503 +#define SSB_SDIO_CIS_PA_PA0B2_HI 5
1504 +#define SSB_SDIO_CIS_PA_ITSSI 6
1505 +#define SSB_SDIO_CIS_PA_MAXPOW 7
1506 +#define SSB_SDIO_CIS_OEMNAME 0x04
1507 +#define SSB_SDIO_CIS_CCODE 0x05
1508 +#define SSB_SDIO_CIS_ANTENNA 0x06
1509 +#define SSB_SDIO_CIS_ANTGAIN 0x07
1510 +#define SSB_SDIO_CIS_BFLAGS 0x08
1511 +#define SSB_SDIO_CIS_LEDS 0x09
1512 +
1513 +#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
1514 +
1515 +
1516 +/*
1517 + * Function 1 miscellaneous registers.
1518 + *
1519 + * Definitions match src/include/sbsdio.h from the
1520 + * Android Open Source Project
1521 + * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
1522 + *
1523 + */
1524 +#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
1525 +#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
1526 +#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
1527 +
1528 +/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
1529 +#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
1530 +#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
1531 +#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
1532 +
1533 +#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
1534 +
1535 +/* REVISIT: this flag doesn't seem to matter */
1536 +#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
1537 +
1538 +
1539 +/*
1540 + * Address map within the SDIO function address space (128K).
1541 + *
1542 + * Start End Description
1543 + * ------- ------- ------------------------------------------
1544 + * 0x00000 0x0ffff selected backplane address window (64K)
1545 + * 0x10000 0x1ffff backplane control registers (max 64K)
1546 + *
1547 + * The current address window is configured by writing to registers
1548 + * SBADDRLOW, SBADDRMID and SBADDRHIGH.
1549 + *
1550 + * In order to access the contents of a 32-bit Silicon Backplane address
1551 + * the backplane address window must be first loaded with the highest
1552 + * 16 bits of the target address. Then, an access must be done to the
1553 + * SDIO function address space using the lower 15 bits of the address.
1554 + * Bit 15 of the address must be set when doing 32 bit accesses.
1555 + *
1556 + * 10987654321098765432109876543210
1557 + * WWWWWWWWWWWWWWWWW SB Address Window
1558 + * OOOOOOOOOOOOOOOO Offset within SB Address Window
1559 + * a 32-bit access flag
1560 + */
1561 +
1562 +
1563 +/*
1564 + * SSB I/O via SDIO.
1565 + *
1566 + * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
1567 + */
1568 +
1569 +static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
1570 +{
1571 + return &bus->host_sdio->dev;
1572 +}
1573 +
1574 +/* host claimed */
1575 +static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
1576 +{
1577 + int error = 0;
1578 +
1579 + sdio_writeb(bus->host_sdio, val, addr, &error);
1580 + if (unlikely(error)) {
1581 + dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
1582 + addr, val, error);
1583 + }
1584 +
1585 + return error;
1586 +}
1587 +
1588 +#if 0
1589 +static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
1590 +{
1591 + u8 val;
1592 + int error = 0;
1593 +
1594 + val = sdio_readb(bus->host_sdio, addr, &error);
1595 + if (unlikely(error)) {
1596 + dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
1597 + addr, val, error);
1598 + }
1599 +
1600 + return val;
1601 +}
1602 +#endif
1603 +
1604 +/* host claimed */
1605 +static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
1606 +{
1607 + int error;
1608 +
1609 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
1610 + (address >> 8) & SBSDIO_SBADDRLOW_MASK);
1611 + if (error)
1612 + goto out;
1613 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
1614 + (address >> 16) & SBSDIO_SBADDRMID_MASK);
1615 + if (error)
1616 + goto out;
1617 + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
1618 + (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
1619 + if (error)
1620 + goto out;
1621 + bus->sdio_sbaddr = address;
1622 +out:
1623 + if (error) {
1624 + dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
1625 + " to 0x%08x, error %d\n", address, error);
1626 + }
1627 +
1628 + return error;
1629 +}
1630 +
1631 +/* for enumeration use only */
1632 +u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
1633 +{
1634 + u32 val;
1635 + int error;
1636 +
1637 + sdio_claim_host(bus->host_sdio);
1638 + val = sdio_readl(bus->host_sdio, offset, &error);
1639 + sdio_release_host(bus->host_sdio);
1640 + if (unlikely(error)) {
1641 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
1642 + bus->sdio_sbaddr >> 16, offset, val, error);
1643 + }
1644 +
1645 + return val;
1646 +}
1647 +
1648 +/* for enumeration use only */
1649 +int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
1650 +{
1651 + u32 sbaddr;
1652 + int error;
1653 +
1654 + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
1655 + sdio_claim_host(bus->host_sdio);
1656 + error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
1657 + sdio_release_host(bus->host_sdio);
1658 + if (error) {
1659 + dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
1660 + " error %d\n", coreidx, error);
1661 + goto out;
1662 + }
1663 +out:
1664 + return error;
1665 +}
1666 +
1667 +/* host must be already claimed */
1668 +int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
1669 +{
1670 + u8 coreidx = dev->core_index;
1671 + u32 sbaddr;
1672 + int error = 0;
1673 +
1674 + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
1675 + if (unlikely(bus->sdio_sbaddr != sbaddr)) {
1676 +#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
1677 + dev_info(ssb_sdio_dev(bus),
1678 + "switching to %s core, index %d\n",
1679 + ssb_core_name(dev->id.coreid), coreidx);
1680 +#endif
1681 + error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
1682 + if (error) {
1683 + dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
1684 + " core %u, error %d\n", coreidx, error);
1685 + goto out;
1686 + }
1687 + bus->mapped_device = dev;
1688 + }
1689 +
1690 +out:
1691 + return error;
1692 +}
1693 +
1694 +static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
1695 +{
1696 + struct ssb_bus *bus = dev->bus;
1697 + u8 val = 0xff;
1698 + int error = 0;
1699 +
1700 + sdio_claim_host(bus->host_sdio);
1701 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1702 + goto out;
1703 + offset |= bus->sdio_sbaddr & 0xffff;
1704 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1705 + val = sdio_readb(bus->host_sdio, offset, &error);
1706 + if (error) {
1707 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
1708 + bus->sdio_sbaddr >> 16, offset, val, error);
1709 + }
1710 +out:
1711 + sdio_release_host(bus->host_sdio);
1712 +
1713 + return val;
1714 +}
1715 +
1716 +static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
1717 +{
1718 + struct ssb_bus *bus = dev->bus;
1719 + u16 val = 0xffff;
1720 + int error = 0;
1721 +
1722 + sdio_claim_host(bus->host_sdio);
1723 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1724 + goto out;
1725 + offset |= bus->sdio_sbaddr & 0xffff;
1726 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1727 + val = sdio_readw(bus->host_sdio, offset, &error);
1728 + if (error) {
1729 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
1730 + bus->sdio_sbaddr >> 16, offset, val, error);
1731 + }
1732 +out:
1733 + sdio_release_host(bus->host_sdio);
1734 +
1735 + return val;
1736 +}
1737 +
1738 +static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
1739 +{
1740 + struct ssb_bus *bus = dev->bus;
1741 + u32 val = 0xffffffff;
1742 + int error = 0;
1743 +
1744 + sdio_claim_host(bus->host_sdio);
1745 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1746 + goto out;
1747 + offset |= bus->sdio_sbaddr & 0xffff;
1748 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1749 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
1750 + val = sdio_readl(bus->host_sdio, offset, &error);
1751 + if (error) {
1752 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
1753 + bus->sdio_sbaddr >> 16, offset, val, error);
1754 + }
1755 +out:
1756 + sdio_release_host(bus->host_sdio);
1757 +
1758 + return val;
1759 +}
1760 +
1761 +#ifdef CONFIG_SSB_BLOCKIO
1762 +static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
1763 + size_t count, u16 offset, u8 reg_width)
1764 +{
1765 + size_t saved_count = count;
1766 + struct ssb_bus *bus = dev->bus;
1767 + int error = 0;
1768 +
1769 + sdio_claim_host(bus->host_sdio);
1770 + if (unlikely(ssb_sdio_switch_core(bus, dev))) {
1771 + error = -EIO;
1772 + memset(buffer, 0xff, count);
1773 + goto err_out;
1774 + }
1775 + offset |= bus->sdio_sbaddr & 0xffff;
1776 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1777 +
1778 + switch (reg_width) {
1779 + case sizeof(u8): {
1780 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
1781 + break;
1782 + }
1783 + case sizeof(u16): {
1784 + SSB_WARN_ON(count & 1);
1785 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
1786 + break;
1787 + }
1788 + case sizeof(u32): {
1789 + SSB_WARN_ON(count & 3);
1790 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
1791 + error = sdio_readsb(bus->host_sdio, buffer, offset, count);
1792 + break;
1793 + }
1794 + default:
1795 + SSB_WARN_ON(1);
1796 + }
1797 + if (!error)
1798 + goto out;
1799 +
1800 +err_out:
1801 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
1802 + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
1803 +out:
1804 + sdio_release_host(bus->host_sdio);
1805 +}
1806 +#endif /* CONFIG_SSB_BLOCKIO */
1807 +
1808 +static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
1809 +{
1810 + struct ssb_bus *bus = dev->bus;
1811 + int error = 0;
1812 +
1813 + sdio_claim_host(bus->host_sdio);
1814 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1815 + goto out;
1816 + offset |= bus->sdio_sbaddr & 0xffff;
1817 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1818 + sdio_writeb(bus->host_sdio, val, offset, &error);
1819 + if (error) {
1820 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
1821 + bus->sdio_sbaddr >> 16, offset, val, error);
1822 + }
1823 +out:
1824 + sdio_release_host(bus->host_sdio);
1825 +}
1826 +
1827 +static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
1828 +{
1829 + struct ssb_bus *bus = dev->bus;
1830 + int error = 0;
1831 +
1832 + sdio_claim_host(bus->host_sdio);
1833 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1834 + goto out;
1835 + offset |= bus->sdio_sbaddr & 0xffff;
1836 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1837 + sdio_writew(bus->host_sdio, val, offset, &error);
1838 + if (error) {
1839 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
1840 + bus->sdio_sbaddr >> 16, offset, val, error);
1841 + }
1842 +out:
1843 + sdio_release_host(bus->host_sdio);
1844 +}
1845 +
1846 +static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
1847 +{
1848 + struct ssb_bus *bus = dev->bus;
1849 + int error = 0;
1850 +
1851 + sdio_claim_host(bus->host_sdio);
1852 + if (unlikely(ssb_sdio_switch_core(bus, dev)))
1853 + goto out;
1854 + offset |= bus->sdio_sbaddr & 0xffff;
1855 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1856 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
1857 + sdio_writel(bus->host_sdio, val, offset, &error);
1858 + if (error) {
1859 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
1860 + bus->sdio_sbaddr >> 16, offset, val, error);
1861 + }
1862 + if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
1863 + sdio_readl(bus->host_sdio, 0, &error);
1864 +out:
1865 + sdio_release_host(bus->host_sdio);
1866 +}
1867 +
1868 +#ifdef CONFIG_SSB_BLOCKIO
1869 +static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
1870 + size_t count, u16 offset, u8 reg_width)
1871 +{
1872 + size_t saved_count = count;
1873 + struct ssb_bus *bus = dev->bus;
1874 + int error = 0;
1875 +
1876 + sdio_claim_host(bus->host_sdio);
1877 + if (unlikely(ssb_sdio_switch_core(bus, dev))) {
1878 + error = -EIO;
1879 + memset((void *)buffer, 0xff, count);
1880 + goto err_out;
1881 + }
1882 + offset |= bus->sdio_sbaddr & 0xffff;
1883 + offset &= SBSDIO_SB_OFT_ADDR_MASK;
1884 +
1885 + switch (reg_width) {
1886 + case sizeof(u8):
1887 + error = sdio_writesb(bus->host_sdio, offset,
1888 + (void *)buffer, count);
1889 + break;
1890 + case sizeof(u16):
1891 + SSB_WARN_ON(count & 1);
1892 + error = sdio_writesb(bus->host_sdio, offset,
1893 + (void *)buffer, count);
1894 + break;
1895 + case sizeof(u32):
1896 + SSB_WARN_ON(count & 3);
1897 + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
1898 + error = sdio_writesb(bus->host_sdio, offset,
1899 + (void *)buffer, count);
1900 + break;
1901 + default:
1902 + SSB_WARN_ON(1);
1903 + }
1904 + if (!error)
1905 + goto out;
1906 +
1907 +err_out:
1908 + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
1909 + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
1910 +out:
1911 + sdio_release_host(bus->host_sdio);
1912 +}
1913 +
1914 +#endif /* CONFIG_SSB_BLOCKIO */
1915 +
1916 +/* Not "static", as it's used in main.c */
1917 +const struct ssb_bus_ops ssb_sdio_ops = {
1918 + .read8 = ssb_sdio_read8,
1919 + .read16 = ssb_sdio_read16,
1920 + .read32 = ssb_sdio_read32,
1921 + .write8 = ssb_sdio_write8,
1922 + .write16 = ssb_sdio_write16,
1923 + .write32 = ssb_sdio_write32,
1924 +#ifdef CONFIG_SSB_BLOCKIO
1925 + .block_read = ssb_sdio_block_read,
1926 + .block_write = ssb_sdio_block_write,
1927 +#endif
1928 +};
1929 +
1930 +#define GOTO_ERROR_ON(condition, description) do { \
1931 + if (unlikely(condition)) { \
1932 + error_description = description; \
1933 + goto error; \
1934 + } \
1935 + } while (0)
1936 +
1937 +int ssb_sdio_get_invariants(struct ssb_bus *bus,
1938 + struct ssb_init_invariants *iv)
1939 +{
1940 + struct ssb_sprom *sprom = &iv->sprom;
1941 + struct ssb_boardinfo *bi = &iv->boardinfo;
1942 + const char *error_description = "none";
1943 + struct sdio_func_tuple *tuple;
1944 + void *mac;
1945 +
1946 + memset(sprom, 0xFF, sizeof(*sprom));
1947 + sprom->boardflags_lo = 0;
1948 + sprom->boardflags_hi = 0;
1949 +
1950 + tuple = bus->host_sdio->tuples;
1951 + while (tuple) {
1952 + switch (tuple->code) {
1953 + case 0x22: /* extended function */
1954 + switch (tuple->data[0]) {
1955 + case CISTPL_FUNCE_LAN_NODE_ID:
1956 + GOTO_ERROR_ON((tuple->size != 7) &&
1957 + (tuple->data[1] != 6),
1958 + "mac tpl size");
1959 + /* fetch the MAC address. */
1960 + mac = tuple->data + 2;
1961 + memcpy(sprom->il0mac, mac, ETH_ALEN);
1962 + memcpy(sprom->et1mac, mac, ETH_ALEN);
1963 + break;
1964 + default:
1965 + break;
1966 + }
1967 + break;
1968 + case 0x80: /* vendor specific tuple */
1969 + switch (tuple->data[0]) {
1970 + case SSB_SDIO_CIS_SROMREV:
1971 + GOTO_ERROR_ON(tuple->size != 2,
1972 + "sromrev tpl size");
1973 + sprom->revision = tuple->data[1];
1974 + break;
1975 + case SSB_SDIO_CIS_ID:
1976 + GOTO_ERROR_ON((tuple->size != 5) &&
1977 + (tuple->size != 7),
1978 + "id tpl size");
1979 + bi->vendor = tuple->data[1] |
1980 + (tuple->data[2]<<8);
1981 + break;
1982 + case SSB_SDIO_CIS_BOARDREV:
1983 + GOTO_ERROR_ON(tuple->size != 2,
1984 + "boardrev tpl size");
1985 + sprom->board_rev = tuple->data[1];
1986 + break;
1987 + case SSB_SDIO_CIS_PA:
1988 + GOTO_ERROR_ON((tuple->size != 9) &&
1989 + (tuple->size != 10),
1990 + "pa tpl size");
1991 + sprom->pa0b0 = tuple->data[1] |
1992 + ((u16)tuple->data[2] << 8);
1993 + sprom->pa0b1 = tuple->data[3] |
1994 + ((u16)tuple->data[4] << 8);
1995 + sprom->pa0b2 = tuple->data[5] |
1996 + ((u16)tuple->data[6] << 8);
1997 + sprom->itssi_a = tuple->data[7];
1998 + sprom->itssi_bg = tuple->data[7];
1999 + sprom->maxpwr_a = tuple->data[8];
2000 + sprom->maxpwr_bg = tuple->data[8];
2001 + break;
2002 + case SSB_SDIO_CIS_OEMNAME:
2003 + /* Not present */
2004 + break;
2005 + case SSB_SDIO_CIS_CCODE:
2006 + GOTO_ERROR_ON(tuple->size != 2,
2007 + "ccode tpl size");
2008 + sprom->country_code = tuple->data[1];
2009 + break;
2010 + case SSB_SDIO_CIS_ANTENNA:
2011 + GOTO_ERROR_ON(tuple->size != 2,
2012 + "ant tpl size");
2013 + sprom->ant_available_a = tuple->data[1];
2014 + sprom->ant_available_bg = tuple->data[1];
2015 + break;
2016 + case SSB_SDIO_CIS_ANTGAIN:
2017 + GOTO_ERROR_ON(tuple->size != 2,
2018 + "antg tpl size");
2019 + sprom->antenna_gain.ghz24.a0 = tuple->data[1];
2020 + sprom->antenna_gain.ghz24.a1 = tuple->data[1];
2021 + sprom->antenna_gain.ghz24.a2 = tuple->data[1];
2022 + sprom->antenna_gain.ghz24.a3 = tuple->data[1];
2023 + sprom->antenna_gain.ghz5.a0 = tuple->data[1];
2024 + sprom->antenna_gain.ghz5.a1 = tuple->data[1];
2025 + sprom->antenna_gain.ghz5.a2 = tuple->data[1];
2026 + sprom->antenna_gain.ghz5.a3 = tuple->data[1];
2027 + break;
2028 + case SSB_SDIO_CIS_BFLAGS:
2029 + GOTO_ERROR_ON((tuple->size != 3) &&
2030 + (tuple->size != 5),
2031 + "bfl tpl size");
2032 + sprom->boardflags_lo = tuple->data[1] |
2033 + ((u16)tuple->data[2] << 8);
2034 + break;
2035 + case SSB_SDIO_CIS_LEDS:
2036 + GOTO_ERROR_ON(tuple->size != 5,
2037 + "leds tpl size");
2038 + sprom->gpio0 = tuple->data[1];
2039 + sprom->gpio1 = tuple->data[2];
2040 + sprom->gpio2 = tuple->data[3];
2041 + sprom->gpio3 = tuple->data[4];
2042 + break;
2043 + default:
2044 + break;
2045 + }
2046 + break;
2047 + default:
2048 + break;
2049 + }
2050 + tuple = tuple->next;
2051 + }
2052 +
2053 + return 0;
2054 +error:
2055 + dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
2056 + error_description);
2057 + return -ENODEV;
2058 +}
2059 +
2060 +void ssb_sdio_exit(struct ssb_bus *bus)
2061 +{
2062 + if (bus->bustype != SSB_BUSTYPE_SDIO)
2063 + return;
2064 + /* Nothing to do here. */
2065 +}
2066 +
2067 +int ssb_sdio_init(struct ssb_bus *bus)
2068 +{
2069 + if (bus->bustype != SSB_BUSTYPE_SDIO)
2070 + return 0;
2071 +
2072 + bus->sdio_sbaddr = ~0;
2073 +
2074 + return 0;
2075 +}
2076 --- a/drivers/ssb/sprom.c
2077 +++ b/drivers/ssb/sprom.c
2078 @@ -14,6 +14,7 @@
2079 #include "ssb_private.h"
2080
2081 #include <linux/ctype.h>
2082 +#include <linux/slab.h>
2083
2084
2085 static const struct ssb_sprom *fallback_sprom;
2086 @@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
2087 u16 *sprom;
2088 int res = 0, err = -ENOMEM;
2089 size_t sprom_size_words = bus->sprom_size;
2090 + struct ssb_freeze_context freeze;
2091
2092 sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
2093 if (!sprom)
2094 @@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
2095 err = -ERESTARTSYS;
2096 if (mutex_lock_interruptible(&bus->sprom_mutex))
2097 goto out_kfree;
2098 - err = ssb_devices_freeze(bus);
2099 - if (err == -EOPNOTSUPP) {
2100 - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
2101 - "No suspend support. Is CONFIG_PM enabled?\n");
2102 - goto out_unlock;
2103 - }
2104 + err = ssb_devices_freeze(bus, &freeze);
2105 if (err) {
2106 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
2107 goto out_unlock;
2108 }
2109 res = sprom_write(bus, sprom);
2110 - err = ssb_devices_thaw(bus);
2111 + err = ssb_devices_thaw(&freeze);
2112 if (err)
2113 ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
2114 out_unlock:
2115 @@ -179,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback
2116 {
2117 return fallback_sprom;
2118 }
2119 +
2120 +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
2121 +bool ssb_is_sprom_available(struct ssb_bus *bus)
2122 +{
2123 + /* status register only exists on chipcomon rev >= 11 and we need check
2124 + for >= 31 only */
2125 + /* this routine differs from specs as we do not access SPROM directly
2126 + on PCMCIA */
2127 + if (bus->bustype == SSB_BUSTYPE_PCI &&
2128 + bus->chipco.dev && /* can be unavailible! */
2129 + bus->chipco.dev->id.revision >= 31)
2130 + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
2131 +
2132 + return true;
2133 +}
2134 --- a/drivers/ssb/ssb_private.h
2135 +++ b/drivers/ssb/ssb_private.h
2136 @@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
2137 }
2138 #endif /* CONFIG_SSB_PCMCIAHOST */
2139
2140 +/* sdio.c */
2141 +#ifdef CONFIG_SSB_SDIOHOST
2142 +extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
2143 + struct ssb_init_invariants *iv);
2144 +
2145 +extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
2146 +extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
2147 +extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
2148 +extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
2149 +extern void ssb_sdio_exit(struct ssb_bus *bus);
2150 +extern int ssb_sdio_init(struct ssb_bus *bus);
2151 +
2152 +extern const struct ssb_bus_ops ssb_sdio_ops;
2153 +#else /* CONFIG_SSB_SDIOHOST */
2154 +static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
2155 +{
2156 + return 0;
2157 +}
2158 +static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
2159 + struct ssb_device *dev)
2160 +{
2161 + return 0;
2162 +}
2163 +static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
2164 +{
2165 + return 0;
2166 +}
2167 +static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
2168 +{
2169 + return 0;
2170 +}
2171 +static inline void ssb_sdio_exit(struct ssb_bus *bus)
2172 +{
2173 +}
2174 +static inline int ssb_sdio_init(struct ssb_bus *bus)
2175 +{
2176 + return 0;
2177 +}
2178 +#endif /* CONFIG_SSB_SDIOHOST */
2179 +
2180
2181 /* scan.c */
2182 extern const char *ssb_core_name(u16 coreid);
2183 @@ -136,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
2184
2185 /* core.c */
2186 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
2187 -extern int ssb_devices_freeze(struct ssb_bus *bus);
2188 -extern int ssb_devices_thaw(struct ssb_bus *bus);
2189 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
2190 int ssb_for_each_bus_call(unsigned long data,
2191 int (*func)(struct ssb_bus *bus, unsigned long data));
2192 extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
2193
2194 +struct ssb_freeze_context {
2195 + /* Pointer to the bus */
2196 + struct ssb_bus *bus;
2197 + /* Boolean list to indicate whether a device is frozen on this bus. */
2198 + bool device_frozen[SSB_MAX_NR_CORES];
2199 +};
2200 +extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
2201 +extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
2202 +
2203 +
2204
2205 /* b43_pci_bridge.c */
2206 #ifdef CONFIG_SSB_B43_PCI_BRIDGE
2207 extern int __init b43_pci_ssb_bridge_init(void);
2208 extern void __exit b43_pci_ssb_bridge_exit(void);
2209 -#else /* CONFIG_SSB_B43_PCI_BRIDGR */
2210 +#else /* CONFIG_SSB_B43_PCI_BRIDGE */
2211 static inline int b43_pci_ssb_bridge_init(void)
2212 {
2213 return 0;
2214 @@ -156,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini
2215 static inline void b43_pci_ssb_bridge_exit(void)
2216 {
2217 }
2218 -#endif /* CONFIG_SSB_PCIHOST */
2219 +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
2220
2221 #endif /* LINUX_SSB_PRIVATE_H_ */
2222 --- a/include/linux/pci_ids.h
2223 +++ b/include/linux/pci_ids.h
2224 @@ -2017,6 +2017,7 @@
2225 #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
2226 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
2227
2228 +#define PCI_VENDOR_ID_BCM_GVC 0x14a4
2229 #define PCI_VENDOR_ID_BROADCOM 0x14e4
2230 #define PCI_DEVICE_ID_TIGON3_5752 0x1600
2231 #define PCI_DEVICE_ID_TIGON3_5752M 0x1601
2232 --- a/include/linux/ssb/ssb.h
2233 +++ b/include/linux/ssb/ssb.h
2234 @@ -27,24 +27,58 @@ struct ssb_sprom {
2235 u8 et1mdcport; /* MDIO for enet1 */
2236 u8 board_rev; /* Board revision number from SPROM. */
2237 u8 country_code; /* Country Code */
2238 - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
2239 - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
2240 + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
2241 + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
2242 u16 pa0b0;
2243 u16 pa0b1;
2244 u16 pa0b2;
2245 u16 pa1b0;
2246 u16 pa1b1;
2247 u16 pa1b2;
2248 + u16 pa1lob0;
2249 + u16 pa1lob1;
2250 + u16 pa1lob2;
2251 + u16 pa1hib0;
2252 + u16 pa1hib1;
2253 + u16 pa1hib2;
2254 u8 gpio0; /* GPIO pin 0 */
2255 u8 gpio1; /* GPIO pin 1 */
2256 u8 gpio2; /* GPIO pin 2 */
2257 u8 gpio3; /* GPIO pin 3 */
2258 - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
2259 - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
2260 + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
2261 + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
2262 + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
2263 + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
2264 u8 itssi_a; /* Idle TSSI Target for A-PHY */
2265 u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
2266 - u16 boardflags_lo; /* Boardflags (low 16 bits) */
2267 - u16 boardflags_hi; /* Boardflags (high 16 bits) */
2268 + u8 tri2g; /* 2.4GHz TX isolation */
2269 + u8 tri5gl; /* 5.2GHz TX isolation */
2270 + u8 tri5g; /* 5.3GHz TX isolation */
2271 + u8 tri5gh; /* 5.8GHz TX isolation */
2272 + u8 txpid2g[4]; /* 2GHz TX power index */
2273 + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
2274 + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
2275 + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
2276 + u8 rxpo2g; /* 2GHz RX power offset */
2277 + u8 rxpo5g; /* 5GHz RX power offset */
2278 + u8 rssisav2g; /* 2GHz RSSI params */
2279 + u8 rssismc2g;
2280 + u8 rssismf2g;
2281 + u8 bxa2g; /* 2GHz BX arch */
2282 + u8 rssisav5g; /* 5GHz RSSI params */
2283 + u8 rssismc5g;
2284 + u8 rssismf5g;
2285 + u8 bxa5g; /* 5GHz BX arch */
2286 + u16 cck2gpo; /* CCK power offset */
2287 + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
2288 + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
2289 + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
2290 + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
2291 + u16 boardflags_lo; /* Board flags (bits 0-15) */
2292 + u16 boardflags_hi; /* Board flags (bits 16-31) */
2293 + u16 boardflags2_lo; /* Board flags (bits 32-47) */
2294 + u16 boardflags2_hi; /* Board flags (bits 48-63) */
2295 + /* TODO store board flags in a single u64 */
2296
2297 /* Antenna gain values for up to 4 antennas
2298 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
2299 @@ -58,7 +92,7 @@ struct ssb_sprom {
2300 } ghz5; /* 5GHz band */
2301 } antenna_gain;
2302
2303 - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
2304 + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
2305 };
2306
2307 /* Information about the PCB the circuitry is soldered on. */
2308 @@ -137,7 +171,7 @@ struct ssb_device {
2309 * is an optimization. */
2310 const struct ssb_bus_ops *ops;
2311
2312 - struct device *dev;
2313 + struct device *dev, *dma_dev;
2314
2315 struct ssb_bus *bus;
2316 struct ssb_device_id id;
2317 @@ -208,6 +242,7 @@ enum ssb_bustype {
2318 SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
2319 SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
2320 SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
2321 + SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
2322 };
2323
2324 /* board_vendor */
2325 @@ -238,20 +273,33 @@ struct ssb_bus {
2326
2327 const struct ssb_bus_ops *ops;
2328
2329 - /* The core in the basic address register window. (PCI bus only) */
2330 + /* The core currently mapped into the MMIO window.
2331 + * Not valid on all host-buses. So don't use outside of SSB. */
2332 struct ssb_device *mapped_device;
2333 - /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
2334 - u8 mapped_pcmcia_seg;
2335 + union {
2336 + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
2337 + u8 mapped_pcmcia_seg;
2338 + /* Current SSB base address window for SDIO. */
2339 + u32 sdio_sbaddr;
2340 + };
2341 /* Lock for core and segment switching.
2342 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
2343 spinlock_t bar_lock;
2344
2345 - /* The bus this backplane is running on. */
2346 + /* The host-bus this backplane is running on. */
2347 enum ssb_bustype bustype;
2348 - /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
2349 - struct pci_dev *host_pci;
2350 - /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
2351 - struct pcmcia_device *host_pcmcia;
2352 + /* Pointers to the host-bus. Check bustype before using any of these pointers. */
2353 + union {
2354 + /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
2355 + struct pci_dev *host_pci;
2356 + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
2357 + struct pcmcia_device *host_pcmcia;
2358 + /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
2359 + struct sdio_func *host_sdio;
2360 + };
2361 +
2362 + /* See enum ssb_quirks */
2363 + unsigned int quirks;
2364
2365 #ifdef CONFIG_SSB_SPROM
2366 /* Mutex to protect the SPROM writing. */
2367 @@ -261,6 +309,7 @@ struct ssb_bus {
2368 /* ID information about the Chip. */
2369 u16 chip_id;
2370 u16 chip_rev;
2371 + u16 sprom_offset;
2372 u16 sprom_size; /* number of words in sprom */
2373 u8 chip_package;
2374
2375 @@ -306,6 +355,11 @@ struct ssb_bus {
2376 #endif /* DEBUG */
2377 };
2378
2379 +enum ssb_quirks {
2380 + /* SDIO connected card requires performing a read after writing a 32-bit value */
2381 + SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
2382 +};
2383 +
2384 /* The initialization-invariants. */
2385 struct ssb_init_invariants {
2386 /* Versioning information about the PCB. */
2387 @@ -336,9 +390,18 @@ extern int ssb_bus_pcmciabus_register(st
2388 struct pcmcia_device *pcmcia_dev,
2389 unsigned long baseaddr);
2390 #endif /* CONFIG_SSB_PCMCIAHOST */
2391 +#ifdef CONFIG_SSB_SDIOHOST
2392 +extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
2393 + struct sdio_func *sdio_func,
2394 + unsigned int quirks);
2395 +#endif /* CONFIG_SSB_SDIOHOST */
2396 +
2397
2398 extern void ssb_bus_unregister(struct ssb_bus *bus);
2399
2400 +/* Does the device have an SPROM? */
2401 +extern bool ssb_is_sprom_available(struct ssb_bus *bus);
2402 +
2403 /* Set a fallback SPROM.
2404 * See kdoc at the function definition for complete documentation. */
2405 extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
2406 --- a/include/linux/ssb/ssb_driver_chipcommon.h
2407 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
2408 @@ -53,6 +53,7 @@
2409 #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
2410 #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
2411 #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
2412 +#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
2413 #define SSB_CHIPCO_CORECTL 0x0008
2414 #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
2415 #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
2416 @@ -385,6 +386,7 @@
2417
2418
2419 /** Chip specific Chip-Status register contents. */
2420 +#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
2421 #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
2422 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
2423 #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
2424 @@ -398,6 +400,18 @@
2425 #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
2426 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
2427
2428 +/** Macros to determine SPROM presence based on Chip-Status register. */
2429 +#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
2430 + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
2431 + SSB_CHIPCO_CHST_4325_OTP_SEL)
2432 +#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
2433 + (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
2434 +#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
2435 + (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
2436 + SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
2437 + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
2438 + SSB_CHIPCO_CHST_4325_OTP_SEL))
2439 +
2440
2441
2442 /** Clockcontrol masks and values **/
2443 @@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
2444 struct ssb_chipcommon {
2445 struct ssb_device *dev;
2446 u32 capabilities;
2447 + u32 status;
2448 /* Fast Powerup Delay constant */
2449 u16 fast_pwrup_delay;
2450 struct ssb_chipcommon_pmu pmu;
2451 @@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct
2452 /* PMU support */
2453 extern void ssb_pmu_init(struct ssb_chipcommon *cc);
2454
2455 +enum ssb_pmu_ldo_volt_id {
2456 + LDO_PAREF = 0,
2457 + LDO_VOLT1,
2458 + LDO_VOLT2,
2459 + LDO_VOLT3,
2460 +};
2461 +
2462 +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
2463 + enum ssb_pmu_ldo_volt_id id, u32 voltage);
2464 +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
2465
2466 #endif /* LINUX_SSB_CHIPCO_H_ */
2467 --- a/include/linux/ssb/ssb_regs.h
2468 +++ b/include/linux/ssb/ssb_regs.h
2469 @@ -85,6 +85,8 @@
2470 #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
2471 #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
2472 #define SSB_IMSTATE_TO 0x00040000 /* Timeout */
2473 +#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
2474 +#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
2475 #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
2476 #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
2477 #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
2478 @@ -162,7 +164,7 @@
2479
2480 /* SPROM shadow area. If not otherwise noted, fields are
2481 * two bytes wide. Note that the SPROM can _only_ be read
2482 - * in two-byte quantinies.
2483 + * in two-byte quantities.
2484 */
2485 #define SSB_SPROMSIZE_WORDS 64
2486 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
2487 @@ -170,26 +172,27 @@
2488 #define SSB_SPROMSIZE_WORDS_R4 220
2489 #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
2490 #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
2491 -#define SSB_SPROM_BASE 0x1000
2492 -#define SSB_SPROM_REVISION 0x107E
2493 +#define SSB_SPROM_BASE1 0x1000
2494 +#define SSB_SPROM_BASE31 0x0800
2495 +#define SSB_SPROM_REVISION 0x007E
2496 #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
2497 #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
2498 #define SSB_SPROM_REVISION_CRC_SHIFT 8
2499
2500 /* SPROM Revision 1 */
2501 -#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
2502 -#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
2503 -#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
2504 -#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
2505 -#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
2506 -#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
2507 -#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
2508 +#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
2509 +#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
2510 +#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
2511 +#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
2512 +#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
2513 +#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
2514 +#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
2515 #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
2516 #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
2517 #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
2518 #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
2519 #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
2520 -#define SSB_SPROM1_BINF 0x105C /* Board info */
2521 +#define SSB_SPROM1_BINF 0x005C /* Board info */
2522 #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
2523 #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
2524 #define SSB_SPROM1_BINF_CCODE_SHIFT 8
2525 @@ -197,63 +200,63 @@
2526 #define SSB_SPROM1_BINF_ANTBG_SHIFT 12
2527 #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
2528 #define SSB_SPROM1_BINF_ANTA_SHIFT 14
2529 -#define SSB_SPROM1_PA0B0 0x105E
2530 -#define SSB_SPROM1_PA0B1 0x1060
2531 -#define SSB_SPROM1_PA0B2 0x1062
2532 -#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
2533 +#define SSB_SPROM1_PA0B0 0x005E
2534 +#define SSB_SPROM1_PA0B1 0x0060
2535 +#define SSB_SPROM1_PA0B2 0x0062
2536 +#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
2537 #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
2538 #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
2539 #define SSB_SPROM1_GPIOA_P1_SHIFT 8
2540 -#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
2541 +#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
2542 #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
2543 #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
2544 #define SSB_SPROM1_GPIOB_P3_SHIFT 8
2545 -#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
2546 +#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
2547 #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
2548 #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
2549 #define SSB_SPROM1_MAXPWR_A_SHIFT 8
2550 -#define SSB_SPROM1_PA1B0 0x106A
2551 -#define SSB_SPROM1_PA1B1 0x106C
2552 -#define SSB_SPROM1_PA1B2 0x106E
2553 -#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
2554 +#define SSB_SPROM1_PA1B0 0x006A
2555 +#define SSB_SPROM1_PA1B1 0x006C
2556 +#define SSB_SPROM1_PA1B2 0x006E
2557 +#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
2558 #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
2559 #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
2560 #define SSB_SPROM1_ITSSI_A_SHIFT 8
2561 -#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
2562 -#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
2563 +#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
2564 +#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
2565 #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
2566 #define SSB_SPROM1_AGAIN_BG_SHIFT 0
2567 #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
2568 #define SSB_SPROM1_AGAIN_A_SHIFT 8
2569
2570 /* SPROM Revision 2 (inherits from rev 1) */
2571 -#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
2572 -#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
2573 +#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
2574 +#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
2575 #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
2576 #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
2577 #define SSB_SPROM2_MAXP_A_LO_SHIFT 8
2578 -#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
2579 -#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
2580 -#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
2581 -#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
2582 -#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
2583 -#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
2584 -#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
2585 +#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
2586 +#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
2587 +#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
2588 +#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
2589 +#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
2590 +#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
2591 +#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
2592 #define SSB_SPROM2_OPO_VALUE 0x00FF
2593 #define SSB_SPROM2_OPO_UNUSED 0xFF00
2594 -#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
2595 +#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
2596
2597 /* SPROM Revision 3 (inherits most data from rev 2) */
2598 -#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
2599 -#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
2600 -#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
2601 -#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
2602 -#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
2603 +#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
2604 +#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
2605 +#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
2606 +#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
2607 #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
2608 #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
2609 #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
2610 #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
2611 -#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
2612 +#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
2613 +#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
2614 #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
2615 #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
2616 #define SSB_SPROM3_CCKPO_2M_SHIFT 4
2617 @@ -264,104 +267,200 @@
2618 #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
2619
2620 /* SPROM Revision 4 */
2621 -#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
2622 -#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
2623 +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
2624 +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
2625 +#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
2626 +#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
2627 +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
2628 +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
2629 +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
2630 +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
2631 +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
2632 +#define SSB_SPROM4_GPIOA_P1_SHIFT 8
2633 +#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
2634 +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
2635 +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
2636 +#define SSB_SPROM4_GPIOB_P3_SHIFT 8
2637 +#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
2638 #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
2639 #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
2640 #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
2641 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
2642 #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
2643 -#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
2644 -#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
2645 -#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
2646 -#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
2647 -#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
2648 -#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
2649 -#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
2650 -#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
2651 +#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
2652 +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
2653 +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
2654 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
2655 +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
2656 +#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
2657 #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
2658 #define SSB_SPROM4_AGAIN0_SHIFT 0
2659 #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
2660 #define SSB_SPROM4_AGAIN1_SHIFT 8
2661 -#define SSB_SPROM4_AGAIN23 0x1060
2662 +#define SSB_SPROM4_AGAIN23 0x0060
2663 #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
2664 #define SSB_SPROM4_AGAIN2_SHIFT 0
2665 #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
2666 #define SSB_SPROM4_AGAIN3_SHIFT 8
2667 -#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
2668 -#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
2669 +#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
2670 +#define SSB_SPROM4_TXPID2G0 0x00FF
2671 +#define SSB_SPROM4_TXPID2G0_SHIFT 0
2672 +#define SSB_SPROM4_TXPID2G1 0xFF00
2673 +#define SSB_SPROM4_TXPID2G1_SHIFT 8
2674 +#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
2675 +#define SSB_SPROM4_TXPID2G2 0x00FF
2676 +#define SSB_SPROM4_TXPID2G2_SHIFT 0
2677 +#define SSB_SPROM4_TXPID2G3 0xFF00
2678 +#define SSB_SPROM4_TXPID2G3_SHIFT 8
2679 +#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
2680 +#define SSB_SPROM4_TXPID5G0 0x00FF
2681 +#define SSB_SPROM4_TXPID5G0_SHIFT 0
2682 +#define SSB_SPROM4_TXPID5G1 0xFF00
2683 +#define SSB_SPROM4_TXPID5G1_SHIFT 8
2684 +#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
2685 +#define SSB_SPROM4_TXPID5G2 0x00FF
2686 +#define SSB_SPROM4_TXPID5G2_SHIFT 0
2687 +#define SSB_SPROM4_TXPID5G3 0xFF00
2688 +#define SSB_SPROM4_TXPID5G3_SHIFT 8
2689 +#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
2690 +#define SSB_SPROM4_TXPID5GL0 0x00FF
2691 +#define SSB_SPROM4_TXPID5GL0_SHIFT 0
2692 +#define SSB_SPROM4_TXPID5GL1 0xFF00
2693 +#define SSB_SPROM4_TXPID5GL1_SHIFT 8
2694 +#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
2695 +#define SSB_SPROM4_TXPID5GL2 0x00FF
2696 +#define SSB_SPROM4_TXPID5GL2_SHIFT 0
2697 +#define SSB_SPROM4_TXPID5GL3 0xFF00
2698 +#define SSB_SPROM4_TXPID5GL3_SHIFT 8
2699 +#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
2700 +#define SSB_SPROM4_TXPID5GH0 0x00FF
2701 +#define SSB_SPROM4_TXPID5GH0_SHIFT 0
2702 +#define SSB_SPROM4_TXPID5GH1 0xFF00
2703 +#define SSB_SPROM4_TXPID5GH1_SHIFT 8
2704 +#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
2705 +#define SSB_SPROM4_TXPID5GH2 0x00FF
2706 +#define SSB_SPROM4_TXPID5GH2_SHIFT 0
2707 +#define SSB_SPROM4_TXPID5GH3 0xFF00
2708 +#define SSB_SPROM4_TXPID5GH3_SHIFT 8
2709 +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
2710 #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
2711 #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
2712 #define SSB_SPROM4_ITSSI_BG_SHIFT 8
2713 -#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
2714 +#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
2715 #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
2716 #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
2717 #define SSB_SPROM4_ITSSI_A_SHIFT 8
2718 -#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
2719 -#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
2720 -#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
2721 -#define SSB_SPROM4_GPIOA_P1_SHIFT 8
2722 -#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
2723 -#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
2724 -#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
2725 -#define SSB_SPROM4_GPIOB_P3_SHIFT 8
2726 -#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
2727 -#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
2728 -#define SSB_SPROM4_PA0B2 0x1086
2729 -#define SSB_SPROM4_PA1B0 0x108E
2730 -#define SSB_SPROM4_PA1B1 0x1090
2731 -#define SSB_SPROM4_PA1B2 0x1092
2732 +#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
2733 +#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
2734 +#define SSB_SPROM4_PA0B2 0x0086
2735 +#define SSB_SPROM4_PA1B0 0x008E
2736 +#define SSB_SPROM4_PA1B1 0x0090
2737 +#define SSB_SPROM4_PA1B2 0x0092
2738
2739 /* SPROM Revision 5 (inherits most data from rev 4) */
2740 -#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
2741 -#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
2742 -#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
2743 -#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
2744 -#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
2745 +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
2746 +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
2747 +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
2748 +#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */
2749 +#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */
2750 +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
2751 +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
2752 #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
2753 #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
2754 #define SSB_SPROM5_GPIOA_P1_SHIFT 8
2755 -#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
2756 +#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
2757 #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
2758 #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
2759 #define SSB_SPROM5_GPIOB_P3_SHIFT 8
2760
2761 /* SPROM Revision 8 */
2762 -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
2763 -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
2764 -#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
2765 -#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
2766 -#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
2767 -#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
2768 -#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
2769 -#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
2770 -#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
2771 -#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
2772 +#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
2773 +#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
2774 +#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
2775 +#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
2776 +#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
2777 +#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
2778 +#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
2779 +#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
2780 +#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
2781 +#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
2782 +#define SSB_SPROM8_GPIOA_P1_SHIFT 8
2783 +#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
2784 +#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
2785 +#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
2786 +#define SSB_SPROM8_GPIOB_P3_SHIFT 8
2787 +#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
2788 +#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
2789 +#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
2790 +#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
2791 +#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
2792 +#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
2793 #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
2794 #define SSB_SPROM8_AGAIN0_SHIFT 0
2795 #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
2796 #define SSB_SPROM8_AGAIN1_SHIFT 8
2797 -#define SSB_SPROM8_AGAIN23 0x10A0
2798 +#define SSB_SPROM8_AGAIN23 0x00A0
2799 #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
2800 #define SSB_SPROM8_AGAIN2_SHIFT 0
2801 #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
2802 #define SSB_SPROM8_AGAIN3_SHIFT 8
2803 -#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
2804 -#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
2805 -#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
2806 -#define SSB_SPROM8_GPIOA_P1_SHIFT 8
2807 -#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
2808 -#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
2809 -#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
2810 -#define SSB_SPROM8_GPIOB_P3_SHIFT 8
2811 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
2812 -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
2813 +#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
2814 +#define SSB_SPROM8_RSSISMF2G 0x000F
2815 +#define SSB_SPROM8_RSSISMC2G 0x00F0
2816 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4
2817 +#define SSB_SPROM8_RSSISAV2G 0x0700
2818 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8
2819 +#define SSB_SPROM8_BXA2G 0x1800
2820 +#define SSB_SPROM8_BXA2G_SHIFT 11
2821 +#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
2822 +#define SSB_SPROM8_RSSISMF5G 0x000F
2823 +#define SSB_SPROM8_RSSISMC5G 0x00F0
2824 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4
2825 +#define SSB_SPROM8_RSSISAV5G 0x0700
2826 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8
2827 +#define SSB_SPROM8_BXA5G 0x1800
2828 +#define SSB_SPROM8_BXA5G_SHIFT 11
2829 +#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
2830 +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
2831 +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
2832 +#define SSB_SPROM8_TRI5G_SHIFT 8
2833 +#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
2834 +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
2835 +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
2836 +#define SSB_SPROM8_TRI5GH_SHIFT 8
2837 +#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
2838 +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
2839 +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
2840 +#define SSB_SPROM8_RXPO5G_SHIFT 8
2841 +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
2842 +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
2843 #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
2844 #define SSB_SPROM8_ITSSI_BG_SHIFT 8
2845 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
2846 -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
2847 +#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
2848 +#define SSB_SPROM8_PA0B1 0x00C4
2849 +#define SSB_SPROM8_PA0B2 0x00C6
2850 +#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
2851 +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
2852 #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
2853 #define SSB_SPROM8_ITSSI_A_SHIFT 8
2854 +#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
2855 +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
2856 +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
2857 +#define SSB_SPROM8_MAXP_AL_SHIFT 8
2858 +#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
2859 +#define SSB_SPROM8_PA1B1 0x00CE
2860 +#define SSB_SPROM8_PA1B2 0x00D0
2861 +#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
2862 +#define SSB_SPROM8_PA1LOB1 0x00D4
2863 +#define SSB_SPROM8_PA1LOB2 0x00D6
2864 +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
2865 +#define SSB_SPROM8_PA1HIB1 0x00DA
2866 +#define SSB_SPROM8_PA1HIB2 0x00DC
2867 +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
2868 +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
2869 +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
2870 +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
2871 +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
2872
2873 /* Values for SSB_SPROM1_BINF_CCODE */
2874 enum {
Personal OpenWRT clone
This page took 0.169062 seconds and 5 git commands to generate.