ramips: switch to 2.6.36
[openwrt.git] / target / linux / ar7 / patches-2.6.35 / 971-cpmac_cleanup.patch
1 --- a/drivers/net/cpmac.c
2 +++ b/drivers/net/cpmac.c
3 @@ -34,7 +34,6 @@
4 #include <linux/skbuff.h>
5 #include <linux/mii.h>
6 #include <linux/phy.h>
7 -#include <linux/phy_fixed.h>
8 #include <linux/platform_device.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/clk.h>
11 @@ -1108,8 +1107,6 @@ static const struct net_device_ops cpmac
12 .ndo_set_mac_address = eth_mac_addr,
13 };
14
15 -static int external_switch;
16 -
17 static int __devinit cpmac_probe(struct platform_device *pdev)
18 {
19 int rc, phy_id;
20 @@ -1121,24 +1118,18 @@ static int __devinit cpmac_probe(struct
21
22 pdata = pdev->dev.platform_data;
23
24 - if (external_switch || dumb_switch) {
25 - strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
26 - phy_id = pdev->id;
27 - } else {
28 - for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
29 - if (!(pdata->phy_mask & (1 << phy_id)))
30 - continue;
31 - if (!cpmac_mii->phy_map[phy_id])
32 - continue;
33 - strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
34 - break;
35 - }
36 + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
37 + if (!(pdata->phy_mask & (1 << phy_id)))
38 + continue;
39 + if (!cpmac_mii->phy_map[phy_id])
40 + continue;
41 + strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
42 + break;
43 }
44
45 if (phy_id == PHY_MAX_ADDR) {
46 - dev_err(&pdev->dev, "no PHY present, falling back to switch on MDIO bus 0\n");
47 - strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
48 - phy_id = pdev->id;
49 + dev_err(&pdev->dev, "no PHY present\n");
50 + return -ENODEV;
51 }
52
53 dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
54 @@ -1266,14 +1257,8 @@ int __devinit cpmac_init(void)
55 else
56 msleep(10);
57
58 - mask &= 0x7fffffff;
59 - if (mask & (mask - 1)) {
60 - external_switch = 1;
61 - mask = 0;
62 - }
63 -
64 cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000):
65 - ~(mask | 0x80000001);
66 + ~(mask | 0x80000000);
67 snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
68
69 res = mdiobus_register(cpmac_mii);
This page took 0.05109 seconds and 5 git commands to generate.