openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt

   1 CPU revision is: 00029007
   2 Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
   3 Primary data cache 4kB, 2-way, linesize 16 bytes.
   4 Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST
   5 Determined physical RAM map:
   6  memory: 02000000 @ 00000000 (usable)
   7 On node 0 totalpages: 8192
   8 zone(0): 8192 pages.
   9 zone(1): 0 pages.
  10 zone(2): 0 pages.
  11 Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
  12 CPU: BCM4712 rev 1 at 216 MHz
  13 Using 108.000 MHz high precision timer.
  14 Calibrating delay loop... 215.44 BogoMIPS
  15 Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem)
  16 Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
  17 Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
  18 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  19 Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
  20 Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
  21 Checking for 'wait' instruction...  unavailable.
  22 POSIX conformance testing by UNIFIX
  23 PCI: Disabled
  24 PCI: Fixing up bus 0
  25 Linux NET4.0 for Linux 2.4
  26 Based upon Swansea University Computer Society NET3.039
  27 Initializing RT netlink socket
  28 Starting kswapd
  29 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  30 devfs: boot_options: 0x1
  31 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  32 Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
  33 pty: 256 Unix98 ptys configured
  34 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  35 ttyS00 at 0xb8000300 (irq = 3) is a 16550A
  36 ttyS01 at 0xb8000400 (irq = 0) is a 16550A
  37 Software Watchdog Timer: 0.05, timer margin: 60 sec
  38 loop: loaded (max 8 devices)
  39 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
  40 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
  41 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
  42 cfi_cmdset_0001: Erase suspend on write enabled
  43 0: offset=0x0,size=0x20000,blocks=64
  44 Using buffer write method
  45 Flash device: 0x800000 at 0x1c000000
  46 Creating 4 MTD partitions on "Physically mapped flash":
  47 0x00000000-0x00040000 : "pmon"
  48 0x00040000-0x007e0000 : "linux"
  49 0x000c0000-0x007e0000 : "rootfs"
  50 0x007e0000-0x00800000 : "nvram"
  51 Initializing Cryptographic API
  52 NET4: Linux TCP/IP 1.0 for NET4.0
  53 IP Protocols: ICMP, UDP, TCP, IGMP
  54 IP: routing cache hash table of 512 buckets, 4Kbytes
  55 TCP: Hash tables configured (established 2048 bind 4096)
  56 ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
  57 ip_tables: (C) 2000-2002 Netfilter core team
  58 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  59 NET4: Ethernet Bridge 008 for NET4.0
  60 Bridge firewalling registered
  61 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  62 All bugs added by David S. Miller <davem@redhat.com>
  63 VFS: Mounted root (jffs2 filesystem) readonly.
  64 Mounted devfs on /dev
  65 Freeing unused kernel memory: 88k freed
  66 Algorithmics/MIPS FPU Emulator v1.5
  67 diag boardtype: 00000708
  68 jffs2.bbc: SIZE compression mode activated.
  69 b44.c:v0.93 (Mar, 2004)
  70 PCI: Setting latency timer of device 00:02.0 to 64
  71 eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc
  72 PCI: Setting latency timer of device 00:01.0 to 64
  73 eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
  74 device eth0 entered promiscuous mode
  75 vlan0: add 01:00:5e:00:00:01 mcast address to master interface
  76 device eth1 entered promiscuous mode
  77 br0: port 2(eth1) entering learning state
  78 br0: port 1(vlan0) entering learning state
  79 br0: port 2(eth1) entering forwarding state
  80 br0: topology change detected, propagating
  81 br0: port 1(vlan0) entering forwarding state
  82 br0: topology change detected, propagating
  83 vlan1: add 01:00:5e:00:00:01 mcast address to master interface