[au1000] prevent error messages on the requesting of the GPIO buttons
[openwrt.git] / target / linux / coldfire / patches / 009-m5445x_serial.patch
1 From 4b5a534c16325217c05a87938885c0ee1fe69a34 Mon Sep 17 00:00:00 2001
2 From: Kurt Mahan <kmahan@freescale.com>
3 Date: Wed, 31 Oct 2007 17:01:41 -0600
4 Subject: [PATCH] MCF5445x core serial support.
5
6 LTIBName: m5445x-serial
7 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
8 ---
9 drivers/serial/mcfserial.c | 23 +++++++++++++++++++++--
10 1 files changed, 21 insertions(+), 2 deletions(-)
11
12 --- a/drivers/serial/mcfserial.c
13 +++ b/drivers/serial/mcfserial.c
14 @@ -45,7 +45,9 @@
15 #include <asm/coldfire.h>
16 #include <asm/mcfsim.h>
17 #include <asm/mcfuart.h>
18 +#ifdef CONFIG_NETtel
19 #include <asm/nettel.h>
20 +#endif
21 #include <asm/uaccess.h>
22 #include "mcfserial.h"
23
24 @@ -61,7 +63,8 @@ struct timer_list mcfrs_timer_struct;
25 #define CONSOLE_BAUD_RATE 38400
26 #define DEFAULT_CBAUD B38400
27 #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
28 - defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
29 + defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \
30 + defined(CONFIG_M54455)
31 #define CONSOLE_BAUD_RATE 115200
32 #define DEFAULT_CBAUD B115200
33 #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
34 @@ -94,7 +97,7 @@ static struct tty_driver *mcfrs_serial_d
35 #undef SERIAL_DEBUG_FLOW
36
37 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
38 - defined(CONFIG_M520x) || defined(CONFIG_M532x)
39 + defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
40 #define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
41 #else
42 #define IRQBASE 73
43 @@ -1604,6 +1607,20 @@ static void mcfrs_irqinit(struct mcf_ser
44 /* GPIOs also must be initalized, depends on board */
45 break;
46 }
47 +#elif defined(CONFIG_M54455)
48 + volatile unsigned char *uartp;
49 + uartp = info->addr;
50 + switch (info->line) {
51 + case 0:
52 + MCF_GPIO_PAR_UART |= 0x000F;
53 + break;
54 + case 1:
55 + MCF_GPIO_PAR_UART |= 0x0FF0;
56 + break;
57 + case 2:
58 + /* GPIOs also must be initalized, depends on board */
59 + break;
60 + }
61 #else
62 volatile unsigned char *icrp, *uartp;
63
64 @@ -1966,7 +1983,9 @@ struct console mcfrs_console = {
65
66 static int __init mcfrs_console_init(void)
67 {
68 +#ifndef CONFIG_M54455
69 register_console(&mcfrs_console);
70 +#endif
71 return 0;
72 }
73
This page took 0.045493 seconds and 5 git commands to generate.