[adm5120] switch to 2.6.28
[openwrt.git] / target / linux / brcm47xx / patches-2.6.25 / 690-mips-allow-pciregister-after-boot.patch
1 Allow registering PCI devices after early boot.
2
3 This is an ugly hack and needs to be rewritten before going upstream.
4 --- a/arch/mips/pci/pci.c
5 +++ b/arch/mips/pci/pci.c
6 @@ -21,6 +21,17 @@
7 */
8 int pci_probe_only;
9
10 +/*
11 + * Indicate whether PCI-bios init was already done.
12 + */
13 +static int pcibios_init_done;
14 +
15 +/*
16 + * The currently used busnumber.
17 + */
18 +static int next_busno;
19 +static int need_domain_info;
20 +
21 #define PCI_ASSIGN_ALL_BUSSES 1
22
23 unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
24 @@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc
25 res->start = start;
26 }
27
28 -void __devinit register_pci_controller(struct pci_controller *hose)
29 +/* Most MIPS systems have straight-forward swizzling needs. */
30 +
31 +static inline u8 bridge_swizzle(u8 pin, u8 slot)
32 +{
33 + return (((pin - 1) + slot) % 4) + 1;
34 +}
35 +
36 +static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
37 {
38 + u8 pin = *pinp;
39 +
40 + while (dev->bus->parent) {
41 + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
42 + /* Move up the chain of bridges. */
43 + dev = dev->bus->self;
44 + }
45 + *pinp = pin;
46 +
47 + /* The slot is the slot of the last bridge. */
48 + return PCI_SLOT(dev->devfn);
49 +}
50 +
51 +void register_pci_controller(struct pci_controller *hose)
52 +{
53 + struct pci_bus *bus;
54 +
55 if (request_resource(&iomem_resource, hose->mem_resource) < 0)
56 goto out;
57 if (request_resource(&ioport_resource, hose->io_resource) < 0) {
58 @@ -84,9 +119,6 @@ void __devinit register_pci_controller(s
59 goto out;
60 }
61
62 - *hose_tail = hose;
63 - hose_tail = &hose->next;
64 -
65 /*
66 * Do not panic here but later - this might hapen before console init.
67 */
68 @@ -94,41 +126,47 @@ void __devinit register_pci_controller(s
69 printk(KERN_WARNING
70 "registering PCI controller with io_map_base unset\n");
71 }
72 - return;
73
74 -out:
75 - printk(KERN_WARNING
76 - "Skipping PCI bus scan due to resource conflict\n");
77 -}
78 + if (pcibios_init_done) {
79 + //TODO
80
81 -/* Most MIPS systems have straight-forward swizzling needs. */
82 + printk(KERN_INFO "Registering a PCI bus after boot\n");
83
84 -static inline u8 bridge_swizzle(u8 pin, u8 slot)
85 -{
86 - return (((pin - 1) + slot) % 4) + 1;
87 -}
88 + if (!hose->iommu)
89 + PCI_DMA_BUS_IS_PHYS = 1;
90
91 -static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
92 -{
93 - u8 pin = *pinp;
94 + bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
95 + hose->bus = bus;
96 + need_domain_info = need_domain_info || hose->index;
97 + hose->need_domain_info = need_domain_info;
98 + if (bus) {
99 + next_busno = bus->subordinate + 1;
100 + /* Don't allow 8-bit bus number overflow inside the hose -
101 + reserve some space for bridges. */
102 + if (next_busno > 224) {
103 + next_busno = 0;
104 + need_domain_info = 1;
105 + }
106 + }
107 + if (!pci_probe_only)
108 + pci_assign_unassigned_resources();
109 + pci_fixup_irqs(common_swizzle, pcibios_map_irq);
110 + } else {
111 + *hose_tail = hose;
112 + hose_tail = &hose->next;
113 + }
114
115 - while (dev->bus->parent) {
116 - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
117 - /* Move up the chain of bridges. */
118 - dev = dev->bus->self;
119 - }
120 - *pinp = pin;
121 + return;
122
123 - /* The slot is the slot of the last bridge. */
124 - return PCI_SLOT(dev->devfn);
125 +out:
126 + printk(KERN_WARNING
127 + "Skipping PCI bus scan due to resource conflict\n");
128 }
129
130 static int __init pcibios_init(void)
131 {
132 struct pci_controller *hose;
133 struct pci_bus *bus;
134 - int next_busno;
135 - int need_domain_info = 0;
136
137 /* Scan all of the recorded PCI controllers. */
138 for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
139 @@ -157,6 +195,7 @@ static int __init pcibios_init(void)
140 if (!pci_probe_only)
141 pci_assign_unassigned_resources();
142 pci_fixup_irqs(common_swizzle, pcibios_map_irq);
143 + pcibios_init_done = 1;
144
145 return 0;
146 }
147 --- a/drivers/ssb/main.c
148 +++ b/drivers/ssb/main.c
149 @@ -1191,9 +1191,7 @@ static int __init ssb_modinit(void)
150 /* ssb must be initialized after PCI but before the ssb drivers.
151 * That means we must use some initcall between subsys_initcall
152 * and device_initcall. */
153 -//FIXME on embedded we need to be early to make sure we can register
154 -// a new PCI bus, if needed.
155 -subsys_initcall(ssb_modinit);
156 +fs_initcall(ssb_modinit);
157
158 static void __exit ssb_modexit(void)
159 {
This page took 0.048827 seconds and 5 git commands to generate.