target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch

   1 From 6261e59795d861f21f63878944900a3da713348c Mon Sep 17 00:00:00 2001
   2 From: Rod Whitby <rod@whitby.id.au>
   3 Date: Tue, 29 Jan 2008 09:53:46 +1030
   4 Subject: ixp4xx: Button and LED updates for the nas100d board (Patch #4768)
   5
   6  * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
   7  * Perform the reset only after the power button has been held down
   8    for at least two seconds.  Do the reset on the release of the power
   9    button, so that NAS devices which have been set to auto-power-on (by
  10    solder bridging the power button) do not continuously power cycle.
  11  * Remove all superflous constants from nas100d.h
  12  * Add LED constants to nas100d.h while we're there.
  13  * Update the board LED setup code to use those constants.
  14
  15 Signed-off-by: Rod Whitby <rod@whitby.id.au>
  16 Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
  17
  18 PATCH FOLLOWS
  19 KernelVersion: 2.6.24-git5
  20
  21 Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-power.c
  22 ===================================================================
  23 --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-power.c
  24 +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-power.c
  25 @@ -21,15 +21,59 @@
  26  #include <linux/irq.h>
  27  #include <linux/module.h>
  28  #include <linux/reboot.h>
  29 +#include <linux/jiffies.h>
  30 +#include <linux/timer.h>
  31
  32 +#include <asm/gpio.h>
  33  #include <asm/mach-types.h>
  34
  35 -static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
  36 +/* This is used to make sure the power-button pusher is serious.  The button
  37 + * must be held until the value of this counter reaches zero.
  38 + */
  39 +static int power_button_countdown;
  40 +
  41 +/* Must hold the button down for at least this many counts to be processed */
  42 +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
  43 +
  44 +static void nas100d_power_handler(unsigned long data);
  45 +static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
  46 +
  47 +static void nas100d_power_handler(unsigned long data)
  48  {
  49 -       /* Signal init to do the ctrlaltdel action, this will bypass init if
  50 -        * it hasn't started and do a kernel_restart.
  51 +       /* This routine is called twice per second to check the
  52 +        * state of the power button.
  53          */
  54 -       ctrl_alt_del();
  55 +
  56 +       if (gpio_get_value(NAS100D_PB_GPIO)) {
  57 +
  58 +               /* IO Pin is 1 (button pushed) */
  59 +               if (power_button_countdown > 0)
  60 +                       power_button_countdown--;
  61 +
  62 +       } else {
  63 +
  64 +               /* Done on button release, to allow for auto-power-on mods. */
  65 +               if (power_button_countdown == 0) {
  66 +                       /* Signal init to do the ctrlaltdel action,
  67 +                        * this will bypass init if it hasn't started
  68 +                        * and do a kernel_restart.
  69 +                        */
  70 +                       ctrl_alt_del();
  71 +
  72 +                       /* Change the state of the power LED to "blink" */
  73 +                       gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
  74 +               } else {
  75 +                       power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
  76 +               }
  77 +       }
  78 +
  79 +       mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
  80 +}
  81 +
  82 +static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
  83 +{
  84 +       /* This is the paper-clip reset, it shuts the machine down directly. */
  85 +       machine_power_off();
  86
  87         return IRQ_HANDLED;
  88  }
  89 @@ -39,17 +83,30 @@ static int __init nas100d_power_init(voi
  90         if (!(machine_is_nas100d()))
  91                 return 0;
  92
  93 -       set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
  94 +       set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
  95
  96 -       if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
  97 +       if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
  98                 IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
  99
 100                 printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 101 -                       NAS100D_RB_IRQ);
 102 +                       gpio_to_irq(NAS100D_RB_GPIO));
 103
 104                 return -EIO;
 105         }
 106
 107 +       /* The power button on the Iomega NAS100d is on GPIO 14, but
 108 +        * it cannot handle interrupts on that GPIO line.  So we'll
 109 +        * have to poll it with a kernel timer.
 110 +        */
 111 +
 112 +       /* Make sure that the power button GPIO is set up as an input */
 113 +       gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
 114 +
 115 +       /* Set the initial value for the power button IRQ handler */
 116 +       power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
 117 +
 118 +       mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
 119 +
 120         return 0;
 121  }
 122
 123 @@ -58,7 +115,9 @@ static void __exit nas100d_power_exit(vo
 124         if (!(machine_is_nas100d()))
 125                 return;
 126
 127 -       free_irq(NAS100D_RB_IRQ, NULL);
 128 +       del_timer_sync(&nas100d_power_timer);
 129 +
 130 +       free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
 131  }
 132
 133  module_init(nas100d_power_init);
 134 Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
 135 ===================================================================
 136 --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
 137 +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
 138 @@ -43,20 +43,20 @@ static struct platform_device nas100d_fl
 139  static struct resource nas100d_led_resources[] = {
 140         {
 141                 .name           = "wlan",   /* green led */
 142 -               .start          = 0,
 143 -               .end            = 0,
 144 +               .start          = NAS100D_LED_WLAN_GPIO,
 145 +               .end            = NAS100D_LED_WLAN_GPIO,
 146                 .flags          = IXP4XX_GPIO_LOW,
 147         },
 148         {
 149 -               .name           = "ready",  /* blue power led (off is flashing!) */
 150 -               .start          = 15,
 151 -               .end            = 15,
 152 +               .name           = "power",  /* blue power led (off=flashing) */
 153 +               .start          = NAS100D_LED_PWR_GPIO,
 154 +               .end            = NAS100D_LED_PWR_GPIO,
 155                 .flags          = IXP4XX_GPIO_LOW,
 156         },
 157         {
 158                 .name           = "disk",   /* yellow led */
 159 -               .start          = 3,
 160 -               .end            = 3,
 161 +               .start          = NAS100D_LED_DISK_GPIO,
 162 +               .end            = NAS100D_LED_DISK_GPIO,
 163                 .flags          = IXP4XX_GPIO_LOW,
 164         },
 165  };
 166 Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nas100d.h
 167 ===================================================================
 168 --- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/nas100d.h
 169 +++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nas100d.h
 170 @@ -38,15 +38,15 @@
 171
 172  /* Buttons */
 173
 174 -#define NAS100D_PB_GPIO         14
 175 -#define NAS100D_RB_GPIO         4
 176 +#define NAS100D_PB_GPIO         14   /* power button */
 177 +#define NAS100D_RB_GPIO         4    /* reset button */
 178 +
 179 +/* Power control */
 180 +
 181  #define NAS100D_PO_GPIO         12   /* power off */
 182
 183 -#define NAS100D_PB_IRQ          IRQ_IXP4XX_GPIO14
 184 -#define NAS100D_RB_IRQ          IRQ_IXP4XX_GPIO4
 185 +/* LEDs */
 186
 187 -/*
 188 -#define NAS100D_PB_BM           (1L << NAS100D_PB_GPIO)
 189 -#define NAS100D_PO_BM           (1L << NAS100D_PO_GPIO)
 190 -#define NAS100D_RB_BM           (1L << NAS100D_RB_GPIO)
 191 -*/
 192 +#define NAS100D_LED_WLAN_GPIO  0
 193 +#define NAS100D_LED_DISK_GPIO  3
 194 +#define NAS100D_LED_PWR_GPIO   15